The EB-18 was a bass version with a 33.825″ scale. According to Longworth, early versions had a single DiMarzio “One” pickup and Grover Titan tuners, while later basses had a DiMarzio “G” pickup and Schaller pickups. Expect to find various combinations of those. Longworth also mentions the possibility that some might have Mighty Mite pickups, but this is uncertain. EB-18 production began in ’79 and about 5,226 (about 1,300 a year) were made until the guitar ended in early 1982.
Much like any other job or hobby, building guitar pedals requires specific tools in order to get the job done. Furthermore, before you start putting together your first build, it is vital that you have a significant understanding of how to solder circuit board electronics – otherwise you may find yourself at a loss due to faulty soldering (believe me, this is not a fun issue to troubleshoot).  If you need to practice soldering, here is a helpful video.
Fernandes Guitars is a guitar and accessory manufacturer, that originated in Japan in 1969, building flamenco guitars. As the company grew it expanded production to include more acoustic guitars, electric guitars, bass guitars, amplifiers, and accessories to become one of the biggest guitar manufacturers in Japan. Fernandes also owns Burny, a brand for Gibson replicas.
The same no-compromise attitude that gives the Redondo Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech NuBone nut and saddle for greater sustain, and a Fishman preamp system (with bass, treble, volume control and tuner) that makes it easy to plug in without sacrificing the guitar’s natural sound. The lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style and its laurel fingerboard and bridge further augment its vibrant tone.
In 1941, CMI became the national distributor for National Dobro products. In ’42, Victor Smith, Al Frost and Louis Dopyera purchased controlling interest in the company. By this time, however, the world was at war and almost all instrument manufacturing ground to a halt as all segments of industry converted to production of materials to support the war effort. In October of 1943, with builders in wartime hiatus, the new owners changed the company name to Valco Manufacturing, incorporating the first initial of each partner’s given name (V-A-L-Co).
Laminate guitars are not made with solid pieces of wood. Instead, a laminate guitar is made with layered pieces of wood, like a veneer, to create the body of the guitar. Despite its reputation among music snobs, laminate guitars can be top-selling, high-performing instruments. Just check out the Fender CD-60CE Acoustic Electric Guitar for proof of a beautiful, all-laminate, highly-popular instrument!
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category"}

While vintage guitars tend to hold a reputation as the best ever made, there are more high-end boutique makers turning out truly magnificent instruments than ever before. Following the wake of trail-blazers like Paul Reed Smith, the current class of boutique guitar makers includes the likes of Knaggs, Kauer, Swope, Fano, Huber, Koll and many many more. Keep an eye on this page for the latest and greatest luthier-made new and used electric guitars to hit the pages of Reverb.
Then, as the most popular version goes, a young, jack of all trades guitarist named Les Paul got tired of all that. So, he set out to create a guitar that could be heard just as much as the louder instruments. He fiddled with a lot of electronic means to boost his sound. Some worked better than others. His piece de resistance at the time would come to be known as "The Log". It looked like what you see up there on the left:
Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”
The best way to use this type of book is to just take 15 minutes a day to work through a page or two at a time. You don’t have to find something that requires a lot of study or dedication on your part at this point. Your first priority should be finding a book that gets you thinking about theory as well as helping you develop coordination in both your fretting and strumming hand.
The best electric guitar isn’t one that just sounds good (however you may define good as) — it’s how it feels in your hands. We remember when we could barely start forming memories, going to our dad’s shows and him using his telecaster on stage. He had been playing since he was 5 years old (which we actually used his opinion for in this guide as well) and continues to play today 50 years later. As we grew up and learned guitar ourselves, it was more about what was comfortable and felt as natural as possible. Paired up with the sound and feel, there are a few more factors to take into consideration when you’re looking for the best electric guitar.

Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.
There were at least three different versions of this guitar with differing knobs, fingerboards, control plates, cord mounting, and trim. One even had a nice rosewood fingerboard with dots. This version was the most monochromatic of the bunch, I suppose. It cleaned up really nicely for these pictures. Okay, so it's an ugly little spud. My wife describes this guitar as "so ugly it's cute," and she fell in love with it in the store for that reason. I like that.
He’s sauntered down through the decades unfazed by stints in jail and hospital, heroin addiction, assorted femmes fatales, copious boozing, rampaging Hells Angels and assaults from fellow icons like Chuck Berry and Peter Tosh. Unconstrained by the grinding gradations of clock, calendar, public morality or legal prohibition, he has defined life on his own terms.
A way to increase the usability of the sound acquired this way is to wire a capacitor in series with the pickup that has its electric polarity reversed. This filters out that pickup's lower frequencies and thus preserves the corresponding frequencies from the other pickup. The resulting sound is fuller and stronger, yet still different from the standard in-phase combinations, resembling the sound of a "cocked wah" (a wah-wah pedal set in a fixed position). The capacitor used for this is usually in the 20–100 nF range.[23]
• Guitar : ELECTRIC SUNBURST captures the sound of a classic guitar, chosen with its rich, warm and versatile sound. The continuous signal path has been retained throughout, including high-quality cables, vintage tube preamps and high-resolution transducers to ensure that every nuance of this legendary instrument was accurately fixed. Since the string holder and neck were recorded separately, you can fully control the balance of the mix. Moreover, a condenser microphone was installed above the strings to capture subtle sound nuances and add punch and realism.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28
ESP Guitars are among the very best guitar brands on the planet. The firm was set up by Hisatake Shibuya in the year 1975 in Tokyo, Japan. They developed lots of reputation as providers of the most effective quality replacement parts for musicals. After 1976, Shibuya began developing his own guitars and since then the ESP guitars are known for great service and its quality. The ESP LTD EC Series EC-10 is a popular Electric Guitar of the company.

Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.
In Chicago in the sixties, "the rules had been laid down" for young, white blues bands, Mike Bloomfield told Rolling Stone in 1968. "You had to be as good as Otis Rush." That wasn't easy. A Mississippi native who moved to the Windy City in the late Forties, Rush was a fearsome electric guitarist – with a grittytreble tone and lacerating attack, like a gunslinging cross of Muddy Waters and B.B. King – as well as a knockout songwriter. Along with guitarists like Magic Sam and Buddy Guy, Rush helped create the more modernized, R&B-influenced approach to Chicago blues that came to be known as the West Side Sound. Rush's impact on later generations was enormous: His late-Fifties and early-Sixties singles were go-to covers for Led Zeppelin ("I Can't Quit You Baby"), John Mayall ("All Your Love [I Miss Loving]") and the J. Geils Band ("Homework"), while Stevie Ray Vaughan named his band after Rush's lethal '58 lament "Double Trouble."

Editorial comment – I advise folks when considering fretwork to consider not choosing a size or leveling operation resulting in less than .040” height if they want to play a style with frequent fret hand slurring, i.e. rock, blues, shred etc.  Low fret height is less capable of sustaining a reasonable fret leveling in the future, making it that much closer to refret time.  You don’t have to choose a very tall size if that is uncomfortable for you, but only choose a low height if that is really what you want and are accustomed to.
To answer this question, all you need to do is close your eyes and focus on what is currently going on around you. Just about every sound you hear, whether you are at home or on a busy street, is packed with some dose of reverb. In nature, sound reflects off of multiple objects and surfaces across various distances. Both our ears and our brains are used to reverb by default. That is one of the reasons why even an artificial reverb effect tends to make a track more enjoyable.
I have a Gemtone guitar tube amp that was made in Canada in early 70's I think. This is the only Gemtone I have ever seen and the only information I could find out about it (but not verify) is that it was a sub-company of Regal Instruments. I would love to find some more info about this amp but have nearly given up after several years of searching. Sorry its not really an answer but my hope is to fire up the thread again so someone with more concrete info can chime in.
While most collectors aren’t necessarily going to boast that they own a number of Harmony guitars, we shouldn’t forget the important “first axe” role Harmony played for many guitarists. This company took mass production of guitars to the next level. And though you may have to sort through a few to find one that is completely intact and doesn’t allow a car to drive under the strings, they were quality-made instruments for the most part. For those of you who first learned on a Harmony Archtone, this is certainly a childhood treasure!
In the end I decided to go with the .033μ. Everything larger sounded too wooly to me on the neck pickup. If I didn’t play much EBow, I might even consider the .022μ. But you might make a different choice, especially if you were using brighter pickups. You won’t know for sure till you try it out with your instrument, amp, and hands, but I hope this gives you some idea of what to expect.
Obviously, what I've done is to give myself a choice of three different sounds--a close, ballsy sound, a mid-range room sound, and a more distant room sound. By setting all three mics up at the same time, putting them each in a different input, and assigning them all to the same track on tape, I've given myself the option of having any one of those sounds immediately available to me, or a combination of them.
Not only is Mick funny, but the book is extremely useful for learning theory, efficiency, technique, playing over chords and more. Similar to Creative Guitar (recommended below), Mick is all about having you put in the work to learn what he's laying out. While you'll spend more time learning this way, it'll pay off and at the same time, teach you a great way of learning.
As cool as these little amps are, they only have a fraction of the features you’ll find in their larger, more powerful big brothers. But, they are more than enough for a newbie to get started on, and they meet and exceed the criteria I outlined in the beginning as what to look for in a good starter amp: They sound good, they are flexible with good overdrive, multiple channels, solid EQ sections and some even have built-in effects.
You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.
From the 1920s to the 1940s, upright bass players who wanted to strengthen the acoustic sound of their instrument had to use small portable PA systems or guitar amp combos designed for acoustic guitar or archtop guitars. Since these systems were not specifically designed to amplify bass instruments, it is unlikely they provided good low-frequency sound reproduction (particularly guitar amps, which are not designed to go down as low in pitch as the low E (41 Hz) and A (55 Hz) strings). In the early 1920s, it was very hard for an upright bass player (indeed for any musician) to find any amplifier and speaker system to make their instrument louder. The only speakers that could be bought during the early 1920s were "radio horns of limited frequency range and low acoustic output", and the cone speaker (which is widely used in modern-era amp cabinets), was not offered for sale until 1925. The first amplifiers and speakers were PA speaker setups; while an upright bassist could potentially have used one of these early PA systems, they could only be powered with large batteries, which made them heavy and hard to carry around. When engineers developed the first AC mains-powered amplifiers, they were soon used to make musical instruments louder.
Replace components. From plugging in and unplugging my guitar so much, the stock input jack lost its grab. So I had an extra Radioshack one lying around, and I soldered it in. Now all my cords are held tight. I also had a problem(common with Teles as I understand it) with my input jack "cup" coming out with wires and all. Once you take a look at how it's held in there, it's an easy fix.

{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: kingston","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

Rule 4—Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.

Thanks. It sounds good without tone shaping ability but I wanted to hear the original sounds. It now has 2 capacitors tied together from the volume pot to 1 tone leg. I am guessing the original tone switch was wired with one cap. for the low & one cap. for middle and the 3rd tone leg was straight wired for treble high. I also wonder how the ground sweep worked on the tone selector?? I just need to know. I’m a DIY guy.

Our site has a wealth of information about what goes into making a Taylor guitar and how to make this very important decision. We have guides for how to find the right fit for you. Learn about the subtle differences in shapes and styles. Delve into different types of woods and construction, which are vital to the flavor and tone of an acoustic. Explore the Taylor line by series to find the look and style you want for your instrument.
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.
The C3M comes with Savarez Cristal Corum high-tension strings, but you can always change them out for something different if you prefer. Aesthetics-wise, the guitar has a matte finish (the “M” in the model name), but it really has no bearing on the way the guitar sounds.All the same, you’ll want to protect your guitar from nicks, cuts and other damage.
Loved this guitar a lot😘, been going back and forth to our nearest guitar center and to he honest with you, I tried the Taylor gs mini, MartIn Black electric acoustic, Breedlove electric acoustc, but man, when I tried and started playing this awesome Ibanez AW54CEOPN, I was blown away!!! The sound was loud and cleat the tone was awesome, the color was fantastic! For the price of $299.00 was very cheap for the quality and sound that this guitar can offer👍🏽👍🏽👍🏽
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
We don’t know about other early guitars, but Univox probably augmented its offerings with other offerings from the Arai catalog, similar to what Epiphone would do with its first imports slightly later, in around 1970. Evidence this might have been so is seen in the book Guitars, Guitars, Guitars (American Music Publishers, out of print) which shows a Univox 12-string solidbody with a suitably whacky late-’60s Japanese shape, with two equal cutaway stubby/pointy horns. The head was a strange, long thing with a concave scoop on top, and the plastic logo. This is the only example of this shape I’ve encountered, but it had two of the black-and-white plastic-covered pickups used on Aria guitars of the period, and the majority of later Univox guitars were indeed manufactured by Arai and Company, makers of Aria, Aria Diamond, Diamond and Arai guitars. These pickups have white outsides with a black trapezoidal insert and are sometimes called “Art Deco” pickups. Perhaps the coolest feature of this strange guitar is a 12-string version of the square vibrato system employed on Aria guitars of this era. You can pretty much assume that if there was a strange-shaped solidbody 12-string Univox, it was not the only model! These would not have lasted long, probably for only until 1970 at the latest, and are not seen in the ’71 catalog.
We have taken a look at the many varieties of electric guitars available in today’s market (you can read about the types of acoustic guitars and even guitar strings as well).  With this many options, it is wise to consider the genre and tone you are searching for by researching what your favorite artists choose to craft their sound.   Your choice may be based upon visual appeal and cool factor, but make sure the instrument you choose is capable of producing the tone of the style of music you play from your heart!  It's a large selection of body styles but hopefully now you're also comfortable with all of the sounds of the various types of electric guitars.

The two piggyback guitar amps included the 1010 Guitar Amplification System ($605), which offered 10 tubes, 105 watts, two channels, four inputs, volume, bass, middle and treble controls for each channel, presence, reverb, tremolo, variable impedance, and a cabinet with eight 10″ Univox Special Design speakers with 10-ounce ceramic magnets and epoxy voice coils. The cabinet grille had eight round cutouts. The 1225 Guitar Amplifier System ($435) had eight tubes, 60 watts, two channels with the same controls as the 1010, and a cab with two 12″ Univox speakers with 20-ounce ALNICO magnets and 2″ voice coil. The grille had two large round cutouts with two small round cutouts on the sides. The amps had handles on the top, the cabs handles on the sides, to make life easier for your roadies.
Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
I play in cover bands. Own large collection of pedals, some I love, some stink. Then I found out that the only people that care about the effects are other musicians. The people( girls dancing mostly) could care less. So now I got a tuner, and drive pedal for solo tone....that's it, and my tone is awesome and hassle free. For studio cats it may be a different story.

   I am now building several models which I offer as my signature work. I've always had a special affinity for archtop guitars, but as you'll see in this website, I will go wherever the creative impulse takes me. The instruments I am building now are a distillation of the best design ideas I've found in classic instruments, re-imagined and evolved into higher form and function, as fine tools for discerning artists. 
A full step down from standard. Used by bands such as Korn, Paradise Lost, Dream Theater (on "False Awakening Suite" and "Illumination Theory" from the self-titled album), Emmure, Obscura, ReVamp, and Fear Factory (on most songs from Obsolete and Digimortal, "Drones" and "Bonescraper" from Archetype, "Moment of Impact" from Transgression, and most songs on Mechanize, The Industrialist and Genexus)
Specifically, the book includes exercises to focus on sweeping, alternate picking, string skipping, and bending in addition to arpeggios and legato. Keep in mind, this book builds on the skills you’ll learn and practice along the way. Having said that, intermediate players can jump a few chapters and still get a ton of value out of the guitar exercises in this book. In that way, it really can function as a choose-your-own-adventure type way to learn guitar that matches your current skill level.
There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
3,000 to 8,000 Hz - Brilliance and Presence: This is the range that can add shimmer or allow a guitar to cut through a mix when boosted. It can also be where you make cuts to keep a guitar from conflicting with a vocal. If making boosts in this range, keep an eye (ear?) out for noise, as any noise present from distortion/effects pedals will very quickly be accentuated as well
I've only been playing guitar for 3 years but it seems like no matter what I do no matter what pedal I use I just can't get that real band sound like the heavy rock bands do on recording but when I tried a marshall that all went away. Marshall has the perfect distorted sound (overdrive) and for the price ha you just can't beat it. I'm getting a mg100fx half stack and it all totals out to only $400 plus this amp can get so loud you can play in a bar or club with only half volume
And it's not just about looking different because it does follow conventional acoustic guitar builds with its solid spruce top, scalloped X-bracing and laminated mahogany back and sides. For plugging in, it comes with the Fishman Sonicore under-saddle pickup and Isys+ preamp system, which comes standard with many acoustic-electric guitars in the market.
The Seismic Audio SADIYG-02 is based on the iconic Telecaster electric guitar. It comes with a single-cutaway body that's crafted from paulownia, a China native wood that's known for being light. The pickguard is already set into the body when you get the package, but you'll need to solder the input jack, the volume and tone knobs, the bridge pickup and the selector switch before you start using it.
Albert Lee‘s extensive use of the Telecaster earned him the nickname of “Mr. Telecaster”. His acolyte Ronnie Earl (then still Ronnie Earl Horvath) favored a Telecaster during his tenure with Roomful of Blues. Both John Tichy and Bill Kirchen of Commander Cody and his Lost Planet Airmen wielded Teles, as did Chris Hillman and Gram Parsons with the Flying Burrito Brothers. Hugh Cornwell of The Stranglers has used Telecasters throughout his career. Joe Strummer (frontman of the punk band The Clash) used his worn and battered 1966 Telecaster (originally Sunburst but spray painted black) with its distinctive “Ignore Alien Orders” sticker from the beginning of his musical career until the day he died. In January 2007, Fender issued the G. E. Smith signature Telecaster in honor of Smith’s reputation as a modern master of the Telecaster. G.E. Smith was the lead guitarist in the Hall & Oates band and the musical director of Saturday Night Live. Tom Morello of “Rage Against The Machine” plays a black American Telecaster called “Sendero Luminoso” (Shining Path) for songs in drop-D tuning. Jim Root from Slipknot had a signature Telecaster released in 2009. Prince plays a Telecaster in the opening scene of his film, Purple Rain. Singer and Songwriter Jeff Buckley (Son of musician Tim Buckley) played an American Telecaster throughout his career. Lynval Golding, one of the guitarists for 2-Tone band The Specials, used a yellow telecaster throughout his time as a Special. Jonny Greenwood, lead guitarist of Radiohead uses a Telecaster Plus model with lace sensor pickups as his main guitar. British singer and guitar player Anna Calviexclusively plays a Telecaster through a Vox AC30. Danny Jones, of McFly, uses a Telecaster Vintage ’52. Deryck Whibley (frontman and guitarist of the band Sum 41) uses his own signature Telecaster Deluxe, issued in 2005. It features one knob for volume and tone, a single humbucker pickup near the synchronized six-saddle bridge and without the traditional pickup selector switch.

Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Black", "sku": "sku:site51296155735782", "price": "129.99", "regularPrice": "159.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black-1296155735782.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Black/H71861000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }