By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.
Learning guitar with no source material to work with will require many different resources, overlapped to fill the blindspots of each. Most people take lessons, but you’ll be at the mercy and pace of your teacher, with little room for your own interpretation. These days, there are apps and online lessons which have their advantages, certainly. They also come with monthly fees, though these will likely be cheaper than a live local instructor.
Nice-4-Bass-V1.5 This is an sf2 simplified version of three different basses - all with 4 velocity layers.  It includes the 1958 Otto Rubner double bass played and mapped by Drogomir Smolken, recorded by Ludwik Zamenhof. The samples are exceptional and some percussive effects have been mapped to some high notes. Royalty-free for all commercial and non-commercial use. Copyright 2016 Karoryfer Lecolds (Karoryfer Samples). The original Meatbass sfz version for Sforzando has round-robin sampling and includes arco as well as pizzicato presets.  (http://www.karoryfer.com/karoryfer-samples).
Jackson is yet another brand among the best electric guitar brands satisfying the needs of metal players. In fact, around three decades ago, back in the ’80s, Jackson guitars were the favorite ones for all metal and hard rock players in the world. Even today, the legacy continues as we see these guitars trending among the fans. Notably, the models like Kelly, King V, Soloist, Dinky, and Rhoads still rule the realm of guitars for their outstanding performance and tone.
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.
Students and expert alike describe this guitar as a fun instrument, and goes further by commenting that it has exceeded their expectations. From its fast action playability to the quality of the finish, the Epiphone SGSpecial continues to rake in compliments. Several people even said that it comes surprisingly close to the feel and sound of a Gibson SG.
A nice twist on this Squier is the use of a humbucking pickup in the bridge position, which is the reason for the HSS moniker (Humbucker-Single-Single). Humbuckers—two single-coil pickups sandwiched together and wired out-of-phase so they cancel out noise—are much quieter than single-coil pickups. However, they don’t have the trebly twang of single-coil pickups. Most rock guitarists use the bridge pickup most of the time because it has a brighter, more cutting sound than the neck pickup, so in most situations the HSS Bullet Strat will deliver a robust and hum-free sound.

The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.

Jazz rhythm guitar often consists of very textural, odd-meter playing that includes generous use of exotic, difficult-to-fret chords. In 4/4 timing, it is common to play 2.5 beat intervals such as on the 2 and then the half beat or "and" after 4. Jazz guitarists may play chords "ahead" of the beat, by playing the chord a swung eighth note before the actual chord change. Chords are not generally played in a repetitive rhythmic fashion, like a rock rhythm guitarist would play.

My epi is very nice (Almost like a gibson for 1/3 of a gibson price) and obviously, my Jackson is far superior than my other guitars. But I'm just have mid end ibanez guitars and they are very good guitars. The high end ibanez are awesome and worth less than high ends of other brands in most cases having with the same quality (or superior in very cases).
You can tell these lists only consist of people who don't dig deep on info of great guitars. Breedlove's USA lines are top shelf. They quality and tone is outstanding and they are a top 5 or 6 company. I have an Oregon Parlor that is quite possibly the best sounding Parlor size guitar I've ever played or heard. And that's a plain Jane American made acoustic. They offer higher end American made stuff. I've played their other body styles and they aren't copying anyone's sound or style. They sound like Breedlove and that's something special. Much like Taylor's have their own sound so do Breedlove.
The Univibe effect was produced to also mimic the sound of the Leslie rotary speaker, but in a slightly different way from the new digital pedals previously mentioned.  They often combine slight amounts of all modulation type effects at the same time to approximate the rotary sound, but became a unique sound of its own.  Some pedals allow some individual tweaking of each modulator, but most typically allow the user to adjust the speed of the Univibe effect.

A batch of 20 to 30 guitars featuring Ripley’s electronics was assembled using Japanese bodies and necks. The one in our possession is a GS2-R (#28949) with a standard (no German carve) Strat-style body, bolt-on multilaminate neck made up of red-dyed 1/16″ maple strips glued end-to-end, pointy-droopy carved bi-level six-in-line headstock, Gotoh tuners, black hardware, 24-fret ebanol fingerboard, faux-pearl pennant inlays and locking Ovation Floyd-Rose-licensed vibrato system. Two plastic-covered humbucking pickups (no exposed poles) featured individual output controls for each string, with six individual three-way mini-toggles for selecting pickups combined with six fader pots directing string/pickup output to a stereo jack.


In 1944 Gibson was purchased by Chicago Musical Instruments. The ES-175 was introduced in 1949. Gibson hired Ted McCarty in 1948, who became President in 1950. He led an expansion of the guitar line with new guitars such as the "Les Paul" guitar introduced in 1952 and designed by Les Paul, a popular musician in the 1950s and also a pioneer in music technology. The Les Paul was offered in Custom, Standard, Special, and Junior models.[15] In the mid-50s, the Thinline series was produced, which included a line of thinner guitars like the Byrdland. The first Byrdlands were slim, custom built, L-5 models for guitarists Billy Byrd and Hank Garland. Later, a shorter neck was added. Other models such as the ES-350T and the ES-225T were introduced as less costly alternatives.[16] In 1958, Gibson introduced the ES-335T model. Similar in size to the hollow-body Thinlines, the ES-335 family had a solid center, giving the string tone a longer sustain.


Guitar -> G-Lab True Bypass Wah Pad -> Keeley Mod Vox Wah -> INTO GIG RIG (and send to Strobostomp tuner) -> Keeley Compressor -> Ibanez Tube Screamer -> MXR Phase 90 -> MXR Distortion+ -> Zen Drive -> TO AMP FRONT INPUT (red cable) -> FROM AMP SEND (purple cable) -> Uni-Vibe -> Tape Delay -> EH Deluxe Memory Man -> G-Lab Dual Reverb -> TO AMP RETURN (blue cable).


Designed to be the greatest all-rounder, the Grand Auditorium shape was the perfect blend of size, shape, volume and comfort, and its modern-day incarnation has seen the likes of the biggest pop star on the planet these days, Taylor Swift pick one up. People forget that before mega-stardom, Taylor was a respected country artist, and it was on a Taylor Grand Auditorium that she plied her trade.
Hello. This is a great article. Does strymon have a user fourm group anywhere. I own the g system, i love it for its effects, but it cant do everything i want. I found strymon, and instantly bought a timeline. I have also ordered big sky and mobius. Is there a way to connect the strymon up to the gsystem, and haveva patch on the g pull up a bank on the strymon, and also be able to choose one or multiple strymons.
Fender California Series Classic This acoustic guitar series will make you swoon with its original Fender body shapes, fully painted tops of solid Sitka spruce and matching Stratocaster-style headstocks. But the California Series Classic models don’t only have the looks; they also have the sound and tonal quality to match. We don’t expect anything less from Fender, and this lineup surely delivers.
Guitar brands such as Antoria shared some Ibanez guitar designs. The Antoria guitar brand was managed by JT Coppock Leeds Ltd England. CSL was a brand name managed by Charles Summerfield Ltd England. Maurice Summerfield of the Charles Summerfield Ltd company contributed some design ideas to Hoshino Gakki and also imported Ibanez and CSL guitars into the UK with Hoshino Gakki cooperation from 1964-1987.[3] The Maxxas brand name came about because Hoshino Gakki thought that the guitar did not fit in with the Ibanez model range and was therefore named Maxxas by Rich Lasner from Hoshino USA [4].


We’re bookending this article with two Epiphone guitars. Why? Because Les Paul was the man. And G-400 Pro was actually a successor Les Paul model from ’61 to ’68, making this guitar a true icon of rock, power, and endless sustain. With a mahogany neck and rosewood fretboard, this guitar has the looks and, with Alnico Classic Pro humbucking pickups, the tonal quality is excellent. 


With the massive range of options available, you'd have to spend the whole day here to go through every one. There are six and twelve-strings, models specifically made for beginners, limited edition double necks; you name it, you'll find it! For a real classic, strap on a Rickenbacker 330 electric guitar. A staple in 60's mod culture, the unique hollowbody construction, slim neck and contoured body make the Rickenbacker 330 so easy to play that it has held the status as one of the all-time greatest guitars for decades.
Those items considered -- performance notation and computational capacity for emulation of stringed instrument sounds otherwise reinforced by the same speaker systems that amplify synthesized sounds -- the other significant factors in the realism matrix involve economics of VST production, listener preferences and, least we forget, performer or producer preferences.
The music that Jimmy Page made was able to transport you so that you got lost in what he was playing. His solos were show-stopping and so innovative when it came to guitar-playing technique at the time. He set himself the challenge of breaking the preconceptions of what a guitar can do, so his style evolved over time. But he was always one of the greats, even when experimenting!
While recording AC/DC's Back In Black, Tony Platt used a pair of condenser mics to pick up different speaker cones and give a wider sound to each guitar: "I developed a technique for recording guitars with two microphones roughly pointing at different speakers, which can be spread out in the stereo mix so it's not just a series of mono point sources. It makes for a more open-sounding guitar. That sound suited their particular technique, which involved Angus and Malcolm playing the same chords but with different inversions to get a very big unison guitar sound."
Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Set - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Inlay: Custom - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black - Pickups: Ibanez - String Instrument Finish: Satin Oil, Transparent Black Sunburst
Launch price: $1,499 / £1,211 | Type: Amp modeller/multi-effects pedal | Effects: 70 | Amp models: 41 guitar, 7 bass | Connections: Standard guitar input, standard aux input, XLR mic input, standard main outputs (L/mono, R), XLR main outputs (L/mono, R), standard stereo phones output, 4x standard send, 4x standard return, s/pdif digital in, s/pdif digital out, AES/EBU and L6 Link out, Variax, MIDI in, MIDI out/thru, USB, 2x expression pedal, Ext amp, CV | Power requirements: Mains power (IEC lead)
Strings produce sound in the guitar. In electric guitars, because there are no holes, the vibration is passed to a pickup which senses the vibration of the strings passes the signal on to the guitar amplifier. There are two types of strings for electric guitars, light and heavy gauge. Lighter ones are easier to play and allow easy bending of notes, but they are more likely to break and produce less volume. On the other side, heavier ones produce high volume but are hard to play and require more finger pressure to bend notes.
Earth Quaker Devices – Have you ever heard a song and wondered “how did they get that sound?”. If it was a recent recording there is a good chance these guys were behind it. They make an incredibly wide range of pedals that all go from great quality, usable pedals for almost any style to the weirdest, most wonderful tones that you have never heard before.
I feel that most of the bad reviews are due to inexperience with electronics. Frustration caused by not knowing what the parts are or how they work. Missing parts is never a good thing, so I guess I was lucky that my kit came with everything. If you do buy this kit and did not manage to get it working please understand that you have probably made a simple mistake.

Much of a B3's magic comes from good mic placement and the player (the right drawbar settings are game changers). EQ should be applied sparingly and mainly as a corrective measure. Usually it's good to look to anything clashing with the bass (80 to 180 Hz), and if it's feeling a little "chubby" in the middle and either can't get out of its own way or doesn't play nice with other mid-heavy instruments or guitars, look to make cuts somewhere between 300 to 500 Hz.

A companion to the Spectrum 5 guitar was a solidbody bass version with the Spectrum 5 body shape. This was the Teisco EBX-200/Teisco Del Rey EBX-200 Super Deluxe Bass. It had two small pickups with two center half-slots and two sliding on/off switches, with volume and tone and was described in the U.S. catalog as having the 5-ply ebony neck. The neck had the three-and-one hooked head and an ebony board with dots, not the picks.
Which is what you’ll be doing with the Omen-6: laying down heavy riffs and unleashing screaming solos. Two overwound Diamond Plus humbuckers are responsible for the guitar’s hot and thick output, while a thin “C”-shaped neck, 14-inch fretboard radius and extra jumbo frets keep things fast and comfy. Although this doesn’t have a tremolo for those dive bombs, a Tune-o-matic bridge and string-through body ensure your sustain will sing for days.
The Zoom G3X features a built-in wah-wah expression pedal that controls the sound parameters in real time. It has over 100 effects and 22-amp models that bring out the amazing sounds of your guitar. This distortion pedal also features a stompbox with over 100 stage-ready effects. For computer recording, this pedal has a USB audio interface for Mac and PC. In addition, it has a balanced line-level output, an onboard chromatic tuner, and an integrated drum machine. Its 40-second looper gives it overdubbing capabilities.

Leo Fender didn’t know how to play guitar. The inventor of the famous guitar brand, which includes the Telecaster and Stratocaster models (favored by Kurt Cobain and Jimi Hendrix), never learned how to play his own instrument. Fender began as an accountant with a knack for repairing radios, later turning that hobby into a full-time electronics operation. The highly versatile Telecaster, which he developed in 1950, became the first mass-produced solid-body electric guitar.
As auto wahs, envelope followers, and other dynamically controlled filter effects respond to your attack, you don’t want to limit dynamics with compressors and/or distortion pedals that reduce dynamic range. Most players also put wah pedals first in the signal chain—mostly to come before distortion effects—however Tom Morello is a notable exception.

▽ Your account minimum payment amount is determined by the purchases and balances on your WebBank/Gettington Credit Account. The change in minimum payment amount is based on your minimum payment due on your last statement, and includes an assumption of interest charges and SafeLine fees, as applicable. The change in minimum payment amount does not include some subsequent activity on your account as of your last statement, such as backordered, unshipped, returned or other pending purchases or exchanges; any payments, including partial, missed or returned payments; any fees, including recurring partner program charges, subsequent interest charges, late fees or returned payment fees. It is also subject to change based on shipping address, shipping method, partial shipments and taxes. Your minimum payment amount will not change and the purchase will not reflect on your statement until the order ships. If you have a balance or are making a multiple item purchase, see the Existing Balance Payment Chart.
Don’t worry about getting the strumming patterns down perfect. You will develop your own strumming style in time. Just try to stay in time. If you have to strum open strings in-between chords, while you switch from one to the other, that’s OK, too. In fact, sometimes, it’s even desirable. It’s what we call ‘style’. You’re main objective right now is learning the chord fingerings, and getting your changes smooth.
Comes with hard case.This is the iconic Yamaha apx-6a. Made in the 1990s it has the iconic Yamaha AMF preamp/Eq system. This specimen is in overall faircondition for a guitar that is over 20 years old. It has normal scratches and other sings of wear. Shipping is free. Estimated arrival is 4-8 business days. A signature is usually required at the time of delivery.
It looks like a Gibson. but it’s another Epiphone — the Epiphone Les Paul Special II. This is the other iconic shape in electric guitars, the Gibson Les Paul, and Epiphone make the budget-priced version with this one listed at $170. In another blog we’ll explain the primary differences between Gibson and Fender guitars. For now, just know it’s like an Apple versus Windows kind of debate. Really.
The noise out of my chain drives me nuts. I want it when I want it, not when all is shut off. I am running a Clapton Signature Strat with humless pickups into my Blues Deluxe. No effects and it is quiet as the dead of night. Plug in the effects (All Boss BTW) and it just starts humming. I have been playing with it and cant seem to isolate the culprit (s)… Frustrating.
Most guitar especially for those which have more than 1 pickup have selector switch. Attached on the body and normally below the 1st E string on the body of a stratocaster guitar. And on the top shoulder for Les Paul. Its a basic things to understand the switches on which pickups its toggling. First, you need to understand what is the switch for???
CAUTION: If you find that the truss rod is very difficult to turn, then stop now and take your guitar to the guitar shop. It may be that there is a problem with the neck or the truss rod and you may damage the guitar by forcing it. Believe me, you do not want to damage the truss rod. If, instead of tightening the truss rod, you need to loosen it, do so by turning it anti-clockwise (counter-clockwise). Again, a quarter turn at a time. Once you have got the gap to 0.012” (or whatever gap you prefer), you will have finished this step. Feel free to remove the capo at this stage if it is attached.  

Alas, the DT-250 was more of a punctuation point than a sign of the times. Or maybe it was a sign of the times. The Phil Collen model (minus his name after ’85) and the flametop DT-350 made it through 1987, but this DT-250 lasted only from ’84 to ’85. Unfortunately for this heavy metal monster, pointy guitars were already on the way out when it appeared, about to be eclipsed by the Superstrat craze that would dominate the rest of the ’80s. While these redboards do not really qualify for rarebird status, they’re not all that common. Over the course of their production, only 1,432 were built for worldwide distribution.

An overdubbing session is ideal for air-guitar miking because there is no leakage from other instruments. I usually prefer to maintain total isolation between the two sources, placing the guitarist and amp in separate rooms. But for some production styles, the acoustic air mic can also do double duty as a distant room mic for the amp, with the ratio of pick sound to ambience determined by mic placement and amp volume. I've recorded some very hefty-sounding rock 'n' roll power chording this way, as well as a variety of vintage-style solos and rhythm parts. At the board, a low shelving or low-midrange EQ cut, combined with a subtle high-end boost around 4 to 6 kHz, will usually help these tracks jump out of the mix.
There are any number of different variations which can give a guitarist his or her tone. The combinations and possibilities are mind-blowing. You can take your pick from the type of guitar used, the hardware and technology used in the guitar, the amplifier you’re plugged into, the room in which you’re playing, the level of technique within your fingers. The list goes on. Typically any one of these factors could make the exact same rig sound completely different in the hands of another player. Yet technical mastery and high-end or vintage equipment are usually a by-product of having played the instrument for A Very Long Time. What about when you’re at the start of your playing career, and you’re looking for a quick shot in the tonal arm? Or you’re more accomplished and looking to experiment with different sounds and textures. It’s here that guitar effect pedals start becoming more and more attractive. But what are they?
The Yamaha Pacifica has long proved a benchmark for quality and specification, and the 112V remains one of the best guitars for beginners. The 112 is far from fancy and simply concentrates on the bare necessities. Yet the construction is of excellent quality. Trust us, if looked after this will be a guitar for life. By design it's an altogether more modern, brighter and lighter take on a hot-rod Strat. But when we say brighter that doesn't mean overly shrill. In fact the bridge humbucker will surprise some, it's beefy without being too mid-range heavy and although the coil-split proves a little bland played clean, with a distortion boost it's a pretty useful gnarly and wiry rhythm voice. It's good to have the choice too when mixed with the middle pickup - switching between the full and split coil here is subtle but, especially with cleaner 'class A' amp voicings, there's enough character difference to be useable. The solo single-coils impress - plenty of percussion and with a little mid-range beef added from the amp these get you to the correct Texas toneland. Neck and middle combined produces a fine modern Strat-like mix - the added brightness will cut through a multi-FX patch nicely.
Despite its high production figures, Fernandes is better known in the United States for its Sustainer system, which uses electromagnetism[1] to vibrate a string for an extended period, so long as the user continues to fret a note.[2] Unlike the similar manual E-Bow sustainer, the Fernandes Sustainer can be used with a standard plectrum, because the sustainer is imbedded in the body of guitar. Fernandes' custom shop has installed numerous Sustainers into guitars built by other manufacturers.
If you’ve decided to make the neck from scratch, rather than purchasing it, you will want to cut that at this point. Make sure you are following specifications for how it will need to connect to the body. It’s best to cut the basic shape first and then refine.  You also need to hollow out space for the truss rod. Finally, for a rosewood fretboard, you will need to laminate the board to the neck.
Sometimes, the research we do - such as this hunt for the best multi effect pedal - opens up our world to a piece of gear we did not previously know about, and yet completely blows us out of the water. Such is the case with the Line 6 M5 Stompbox Modeler. This is the second item from Line 6 that made it into our top 5 list (the other one being the high-end POD HD500X). The Line 6 M5 is different than the other multi-effect pedals on our list, as it’s the only one that can only model one effect at a time, and also does not do amplifier modeling. With the other pedals on our list, you could replace your entire pedalboard by having multiple effects active at the same time. The M5 is far more simplistic, only letting you use one at a time. You might be asking yourself why we love it so much - well, it’s not for everyone, but there’s a lot of beauty in its simplicity. Read on to see if this is the right pedal for you.
Woofer enclosures must be larger and more sturdily built than cabinets for mid-range or high-frequency (tweeter) speakers. As such, in the 1950s, when Ampeg introduced bass amplifier and speaker systems, bass guitarists began to use them. Similarly, Hammond organ players used a specialized keyboard combo amplifier, the Leslie speaker cabinet, which contains a woofer for the low frequencies and a horn for the high frequencies. The Leslie horns rotate and a baffle around the woofer rotates as well, producing a rich tremolo and chorus effect.
While it won’t necessarily get you to Hendrix levels, it is a useful approach for beginners who want the focus to be on keeping enough fun and practically in practicing guitar. And while you still absolutely have to practice, this method shows tips and tricks up front to keep learning theory fun. It will also include enough information around traditional arpeggios, tunings, and scales to make sure you will learn music theory.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: b.c. rich","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"b.c. rich","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
When Bob Dylan described the Band's "wild mercury sound," he was really talking about Robbie Robertson's guitar, as exemplified by his torrid, squawking solo on "Just Like Tom Thumb's Blues" from their 1966 tour. But by the time the Band were making their own LPs, Robertson had pared down his approach, evolving into a consummate ensemble player. "I wanted to go in the opposite direction," said Robertson, "to do things that were so tasteful and discreet and subtle, like Curtis Mayfield and Steve Cropper… where it was all about the song."
This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!
Some Craigslist and EBay sellers have been claiming the 500 and 600-series Kents are made by Teisco. I think we’ve shown that that’s not the case. Some sellers also describe those early Kents as having “Ry Cooder” pickups. As most of you know, Ry Cooder is an incredibly talented multi-stringed-instrument musician. David Lindley, another great talent, gave him a pickup from an old Teisco guitar. The photo at left is exactly like it. Cooder put the pickup into one of his Stratocasters and liked the sound so much that he got another one and put it into another Strat. These pickups are also described as “gold foil” pickups. There are variations in the pattern of cut-outs on the chrome covers of different pickups. I don’t know if the others sound any different, but if I were looking for a “Ry Cooder Pickup”, something like the one pictured here is what I would be looking for. The pickups have become worth more than the guitars they are on, consequently, as the guitars are bought up and trashed for their pickups, their prices are going to rise.

PLUG THE PORES What you use to prep the body for paint depends on the chosen finish that you will go with. For a solid color finish you will want to fill any of the pores with a wood filler or Bondo glazing putty. I prefer Bondo because it dries quickly and sands smooth. Use one of those plastic speaders that you can get for mud at a paint or hardware store and press the filler firmly into the pores and gaps in the wood. Cut diagonaly accross and against the grain to fill the pores and gaps better. Use a sanding block and a 220 grit paper and after the filler dries to ensure an even flat surface. Only use your hands to lightly sand on the rounded edges or hard to reah areas of the guitar. The roundness of your fingertips can cause depressions in the woods surface so stick with the sanding block on the flat areas. Inspect the surface to see if any pores or gaps remain and repeat the steps if needed. Then clean the surface with a tack cloth to remove any dust.

6.  I’ve said this before but think it needs to be said again… Customer using truss rod to “fix” action.  Result:  Broken truss rod.  Fix:  Well, the fix costs more than the instrument and the guitar was scrapped.  This one depends on where the break occurred and what kind of rod was used.  If it’s a conventional rod and the break is close to the adjusting nut, Stew-Mac has a tool to re-thread the rod and save it.  If the break is farther down the rod or double action you may have to remove the fret board and that my friend is major surgery.
It’s ironic that Leo Fender, the creator of the most influential instrument in rock music, wasn’t actually a fan of rock ’n’ roll; he preferred country and western. But it goes to show you that once something new is out there, you can’t stop makers and players from reinventing it, adapting it for new purposes, taking it apart and putting it back together in new ways. The electric guitar is a prime example of unintended consequences. Initially, it just wanted to be a bit louder, but it ended up taking over and reinventing popular music and culture. Will we even recognize the sound of the electric guitar 10 or 20 years from now? I, for one, hope not.
The Korg Kaoss Pad is a small touchpad MIDI controller, sampler, and effects processor for audio and musical instruments, made by Korg. The Kaoss Pad's touchpad can be used to control its internal effects engine, which can be applied to a line-in signal or to samples recorded from the line-in. Effects types include pitch shifting, distortion, filtering, wah-wah, tremolo, flanging, delay, reverberation, auto-panning, gating, phasing, and ring modulation. The Kaoss Pad can also be used as a MIDI controller.

In 2013, Gibson introduced the Government Series of Les Paul, SG, Flying V, Explorer and ES-335 guitars which were constructed solely of tonewood the US government seized but later returned to Gibson after the resolution of the company's Lacey Act violation in 2011. The guitars were finished in "government grey" and also featured decorations which intended to draw attention to the issue of government. A year later in 2014, Gibson released the Government Series II[77] of guitars, which were essentially the same as the first series, only finished in a new color: "government tan".


Today I was working on my fave guitar, a James Trussart Steelcaster. Instead of reconnecting my tone pot and capacitor as usual, I ran two wires from the tone pot’s wiper and ground terminals, the spots where the cap normally connects, and soldered them to a little piece of stripboard with sockets for connecting the caps. Then I recorded quick demos for six possible cap values. I started with the two most common values, and then added two lower values and two higher ones.
The culture of staying up late and having some drinks any and every night of the week was what I grew up around. But it was also twinned with a kind of mountain vibe because they were young and happy to have gotten away from the farmlands. So they were really into pop music. So the two things kind of came together, this assumption that you played or sang.
The Dobro Standard Guitar is not shown, but this is described as a “…conventional arch top body” with Dobro electric amplification. Like the first National Spanish, this had f-holes and was made by Regal. The Dobro Mandolin is also described as having a “conventional” body, probably a pear-shaped mando, again, by Regal. These were probably introduced slightly later than the Hawaiian.
A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.
So fun...I like...Let me start off by saying I'm not even a game person I bought this game for my son than watching him play it I took over and couldn't stop playing it I played it non stop until I beat it the content and visuals are great...The only downside was that I was so addicted to this game that I finished it in about one week, but I already am planning on playing it again on a higher difficulty and with a goal of finding more of the hidden treasures that are sprinkled throughout the game.

Fuzz – A dynamic distortion effect that sounds just like the name. Fuzz was originally created by putting a pinhole or cut in the speaker of an amplifier. Original fuzz pedals use a transistor-based circuit to create the sound. Compared to distortion, fuzz is more raw, abrasive and doesn’t compress the tone. These pedals typically perform best at the front of your effects chain into a clean amplifier.


What would happen if four former Marshall employees got together? Well in this particular case, they formed Blackstar! Their product range includes hand-wired amps (the Artisan series) as well as products featuring different digital technologies (the ID:series). Plus, we have them to thank for the existence of the ISF system, a control that allows to switch gradually between American and British sound. In spite of the company's young life (it was founded in 2004), the brand already has many artists associated to its name like Silenoz (Dimmu Borgir) and James Dean Bradfield (Manic Street Preachers).
A 6 stringed guitar, black satin in color. It is gloss finish and comes without a case. The body is made from Mahogany and the neck from the Flamed maple. The guitar consists of tone,volume and 3 way pickup switch. It was introduced alomost 20 years ago and includes all the charm present in its cousins from USA . The device can be acquired with as little as INR 19,755  and more details can be found at:

This guitar also features Epiphone’s patented Locktone Tune-O-Matic Bridge and stop bar tailpiece for serving the easiest string changes and increased sustain. It comes with master volume and master tone controls along with the long-lasting 3-way pickup selector for a bold and controllable performance. The most exclusive feature added by Epiphone is that by pushing a button you can mute all the outputs to add more rock and roll to your performance.

Another popular method for keeping that signal strength is by way of a booster pedal which pretty much gives your signal a dose of added voltage in order to avoid degradation. Booster pedals become increasingly necessary when working with a signal chain involving a good number of pedals in order to keep that signal strong by the time it hits the amp, but depending on whether you just want to boost the overall signal strength or the strength of a certain effect, placement becomes important.
A noise gate allows a signal to pass through only when the signal's intensity is above a set threshold, which opens the gate. If the signal falls below the threshold, the gate closes, and no signal is allowed to pass. A noise gate can be used to control noise. When the level of the 'signal' is above the level of the 'noise', the threshold is set above the level of the 'noise' so that the gate is closed when there is no 'signal'. A noise gate does not remove noise from the signal: when the gate is open, both the signal and the noise will pass through.

Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”

The Yamaha LL16 gives you high-end features for a lot less money, starting off with its solid Engelmann spruce top and solid rosewood back and sides. This all solid body results in richer and more detailed acoustic tone, something that you will have to pay top dollars for from other acoustic brands. It also sports a slightly smaller body that gives it an elegant appeal, adding to its already favorable affordable price and top-tier specs.
Awesome for the money! I have had my guitar for about a month now. The guitar itself is worth the money. I play on a 100w amp at church and it sounds good. Definitely not the highest quality but still a good full body sound. (After restringing it. The strings it comes with are garbage) The amp that this comes with is nice ... I actually was using it as a practice amp with my bass and it did fine. Nothing that I could play with any other instruments but definitely can hear what I'm doing. My son also uses it as a practice amp on an electric guitar and it does fine, it doesn't have any functions just meant to be an accustic amp. Definitely worth the money.

Reverb's Free Online Price Guide: This specialty vintage guitar site is one of the largest, most carefully maintained used vintage guitar and bass shops on the internet. It sells hundreds of used guitars and basses of all makes and models. It offers a free online Price Guide where you simply type in the model of instrument you have, and Reverb will analyze its vast database of transactions and give you a large result filled with prices. This gives you a real-time look at the market and where your particular kind of instrument fits in. It is a living, breathing blue book, and (the best part) it is free.
Teisco's very FIRST solid body electric guitar, the 1954 Teisco, Model J-1. 1 single coil Pickup. Front plate says, "NIHON ONPA KOGYO CO. LTD TEISCO". Back plate says, "TEISCO ELECTRIC GUITER MODEL J1". Yes, Guitar is misspelled as "GUITER"!. Maple neck is a "ball bat" with very pronounce "V". Guitar is currently set up for slide with "flat-wounds". VERY ROUGH CONDITION and lots of "character". Where to start, hm....? Firstly it has termite, yes, termite damage to the back. Don't ask me how, I don't know. The top is veneered with a beautiful quilted maple, but is missing a big section on the front. The tailpiece is missing it's cover. The wood bridge is partially inverted and sagging, due to string tension. The pick guard is warped (normal to many vintage guitars). We're pretty sure the brown bakelite knobs, while cool, are not original. Some of the frets have been changed, mostly by removing from the last 6 slots and relocated. 95% of the veneer is missing from the back. The tuners are mostly original with a couple of replacement gears. A couple of the tuner button shafts are bent, but tuners still function. The great thing is the way it is currently set up, it makes a heck of a "slide guitar". The original pickup sounds incredible through both our shop Trace Elliot and Marshall JCM-800!!! No case included.
The bridge (or “tailpiece”) is the piece near the back of the guitar that anchors the strings and helps transfer their vibration to the guitar’s body. There are really only two main types: vibrato and non-vibrato. Non-vibrato bridges are exceedingly common and provide the best sound transfer. Vibrato tailpieces feature a tremolo arm or “whammy bar” that alters the string tension when pushed and pulled, resulting in a change in pitch that sounds really cool. Vibrato tailpieces don’t transfer sound as well as non-vibratos because they have reduced contact with the body of the guitar. This can result in loss of sustain. Furthermore, the constant changes in string tension can send the tuning out of whack. Don’t say you weren’t warned.
This guitar follows after the tried and tested formula of old Stratocaster design, from the double cutaway alder body to the bolt-on maple neck, down to its triple single coil pickup configuration. The scale length follows after traditional builds at 25.5", while the neck profile (modern C) and narrower nut width of 1.65" makes this guitar viable for modern players. While it doesn't have vintage voiced pickups, the default pickups are not so bad either, and will give you the distinctive Strat tone that almost everybody loves.
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.

The transmogrification of bulky, fiddly tape echo units into transistorized analog echo pedals in the late 1970s is arguably one of the greatest economies the delay-loving guitarists has ever experienced (physically more than financially). Players addicted to anything from slapback to the hypnotic sonic cloning of their Echoplexes, Copicats, and Space Echoes breathed collective sighs of relief when Electro-Harmonix and MXR introduced relatively affordable analog delay pedals. By the early 1980s there was barely a rocker going who stepped on stage without a delay pedal, and every major effects maker offered a model or two. Many players gradually decided that their old tape echoes actually sounded better than the transistorized alternatives, but for convenience sake a majority of these still stuck with their stompboxes for live work. Opinions on the tonal superiority of tape echo—and especially tube-powered versions—have become even more vehement in recent years, spawning high prices in the used market and even the recent offering of a Tube Tape Echo from boutique pedal maker Fulltone, but many still find tape impractical.
You should add the plugins on Igniteamps.com They are all free and are great. They use them as tools to help them design physical amps, so they are very accurate and almost zero-latency. They have a few amps and pre-amps, 2 OD pedals and even a cab modeller which is more than enough to get you started. The Emmisary is a freakin' miracle. It can do any tone (I use it for metal, blues, clean) but it's best for molten, in-your-face heavy metal since it has a 4-way EQ on the lead channel.
One of the most respected guitar manufacturers in the world, Epiphone electric guitars can be found everywhere from small-town basements to the biggest arena rock stages. The reason is because of their dedication to providing high-quality instruments for musicians of all tastes and skill levels, and throughout this catalog you'll find more than enough choices to prove it. After all, everyone who has a desire to crank up and play deserves an electric guitar that looks, sounds, and performs flawless, and Epiphone has an option for every budget. It's easy to see how trusted the Epiphone name is when you consider how many best sellers and top-rated items make up this section. For that matter, all you have to do is look at the many top-recording artists who have Epiphone signature models, including metal legend Zakk Wylde, virtuoso Gary Clark, Jr., and Tommy Thayer of Kiss. Speaking of signature guitars, check out the popular Limited Edition 2014 Joe Bonamassa Les Paul Standard Electric Guitar. Sporting a gorgeous Pelham Blue with a black back and a Bonamassa neck profile, this axe looks as slick as it plays. As for its sound? You can expect plenty of power in every chord you hit thanks to the Gibson USA BurstBucker-2/3 humbuckers. Now for those who prefer the lightweight feel and ringing sound of a semi-hollow, go with the Dot Electric Guitar. Equipped with dual humbuckers and a 3-way pickup selector, the Dot can go from growling snarls to crystal-clear sustain. Additionally, the two volume tone controls allow you to tailor your sound, while the smooth, 22-fret rosewood fretboard means you can play at lightning-fast speed. And this is only a taste of what Epiphone has in store for you. In fact, taking a tour through Epiphone's extensive selection of electric guitars is just as fun as playing them. From solid body electrics and hollow bodies to semi-hollows and even guitars for left-handers, the options are seemingly endless. So stick with Epiphone, and you'll have no problem finding an instrument that reflects your own discerning style.
It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.

Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.
It was shortly after the debut of the first Supros that National Dobro entered a period of major transition. By 1935, at least, the company had decided to abandon the sunny beaches of L.A. for the freezing winters of Chicago, then the principal home of America’s instrument makers, and not coincidentally, America’s giant mass merchandisers Montgomery Ward and Sears. Both Wards and Sears had been offering National and Dobro resonator guitars since the late ’20s. Being in Chicago had the obvious advantages of proximity to the resources surrounding the business and being next door to the world’s two largest retailers of the day. The move to the Midwest began early 1936 and took almost a year and a half. Throughout most of ’36, the majority of production continued in L.A.
Large speaker cabinets such as 8x10" enclosures may have wheels and a "towel bar" and dolly wheels to facilitate transportation. Speaker cabinets with 1/4 input jacks typically have two parallel jacks, so that the amp head may be plugged into one cabinet, and then a second cabinet can be "daisy chained" by connecting it to the first cabinet. Cabinets with horn-loaded tweeters often have an attenuator knob for controlling the tweeter. Some 2000s-era speaker cabinets may have Speakon jacks; these jacks are often used with high-wattage amps, because they are safer, as the cable connections are hidden inside the connector and thus it is impossible for the user to touch the metal contacts when plugging in the amp cable.
The company initially manufactured only traditional folk instruments,[citation needed] but eventually grew to make a wide variety of stringed instruments, including violins, cellos, banjos, upright basses—and a variety of different types of guitars, including classical guitars, lap steel guitars, semi-acoustic guitars, and solid body electrics. Some of Kay's lower-grade instruments were marketed under the Knox and Kent brand names.

EQ (Equalizer) – A frequency-based effect that allows you to boost or cut frequencies along the audio spectrum. Graphic EQ pedals such as the GE-7 and GEB-7 have faders for each frequency band that you can move up or down to boost or cut the frequency. EQ pedals can be used to tackle problem frequencies such as mid-range honk or to give a bass boost or add some high end sparkle. Alternatively you can use EQ to create interesting tones such as emulating a small radio by rolling off the bottom end and boosting the high mids.

So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.


Here we have for your consideration the Booming classic vintage Yamaha FG 160 Acoustic Guitar Made in Japan in the early 70's from Nippon Gakki factory. This example is an eary 70's a more RARE version Yamaha FG 160 again this example is the Made In Japan Nippon Gakki and not to be mistaken for the similar Korean version of the FG-160 which is also nice but not the same as these apples/oranges this is a great guitar. This example was built over 35 years ago and was built to very high detailed standards workmanship are wonderful quality as well as some of the best woods available in that time period to compete with the great Martin and now this Yamaha is quite well aged and is a true SINGING vintage guitar in its own right. This one has the Amber/Tan label and not the Red Label. The frets have good height and appear newish and though to probably to have had a fret job done sometime in it's past. The guitar has it's natural age and patina with a few expected minor nicks,dings and scratches from a well loved and played instrument. This fine example is on the way... We upon receiving we will remove strings clean and detail the guitar oil rosewood and polish finish, set intonation and set up this guitar to play very well and may include new bone nut/saddle/strings we have several of these old Yamahas and they are amazing instruments very well compared to Martin, Taylor, Gibson for there fine construction and playability with amazing tone for this kind of money... Here s a link to Harmony Central if you care to rehttp://reviews.harmony-central.com/reviews/Guitar/product/Yamaha/FG-160+/10/1 All New pics and additional info soon to come... Interested ? ask Thanks .
No, you’re right. The more I think about it, the more I see the attraction. Plus, I was wrong in my previous comment when I said the sides would sound the same up to the limit of the smaller cap. Because I think they’re be audible resonance differences between the two values. It’s the same reason why the scheme I’m discussing differs from a standard tone control. And I sound vague, it’s ’cause I am! One reason I’m eager to explore this …
Add your vote to this list of the top guitarists ever and help to pick the best guitar player in the history of music. These roock, jazz, blues guitarists have all had long careers filled with success and failure. Some are still jamming out today, which other rock stars died too young, before their talents could be fully appreciated. Now is your chance to give the best guitar players in the world some recognition.
This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.

Numerous sources, such as Physics by John D. Cutnell and Kenneth W. Johnson, state that the human ear can hear sounds ranging from 20 hertz to 20,000 hertz. A guitar is going to fall in this range because it wouldn’t make good business sense to produce an instrument that can only be heard by dogs. From a scientific perspective, just about everything within the normal human range would be considered effective, since the instrument accomplishes its goal. Beyond that, a researcher wouldn’t be able to designate what’s good.
The iconic helmet and armor. The legendary story. The heart-racing combat. Halo has defined a generation of action-packed gaming and online multiplayer gameplay for more than a decade. Now, you can re-experience the thrills, adrenaline and immersive storylines of the Halo franchise, remastered and revamped for the Xbox One. With The Master Chief Collection, you'll not only receive stunning visuals, white-knuckle adventures and deep, rich storylines, you'll have a chance to honor the iconic hero who has been central to so many of your gaming conquests. Featuring a remastered Halo 2: Anniversary, Halo: Combat Evolved Anniversary, Halo 3 and Halo 4, Halo: The Master Chief Collection lets you experience the legendary story of the iconic hero with the full Xbox One treatment. A total of 45 campaign missions and more than 100 multiplayer and Spartan Ops maps await you, as well as an all-new live-action digital series and access to the Halo 5: Guardians beta. Dive into the adventure with Master Chief in Halo 2: Anniversary, which celebrates the 10-year anniversary of the classic game. Lock and load for a fully remastered campaign, or switch between that and the original 2004 version with the Classic mode. Use all-new skills to blast through the campaign, and get ready for the 23 original multiplayer maps, as well as six re-imagined ones, for a thrilling online combat experience. Take advantage of the all-new Master Menu, which lets you play through all four unlocked campaigns, start to finish, or seamlessly jump around as you choose. Be one of the first to experience the next generation of Halo multiplayer with the Halo 5: Guardians beta access. Then, kick back and relax with a thrilling new live-action adventure featuring elite UNSC operatives exploring a strange and treacherous world in the Halo: Nightfall digital series, brought to life by 343 Industries, director Sergio Mimica-Gezzan and Executive Producers, Ridley Scott and Scott Free TV President, David Zucker. Get ready to experience the future — by fully understanding your past.
An awesome acoustic-electric guitar at affordable price! I felt like this is one of my smartest purchase. I have an OM one with very beautiful look - ivory-color spruce top and chocolate-color back and side. The guitar comes with built-in Fishman pick-up and tuner. It has bright and sweet sound on picking, while having strong and resonant sound on strumming. With capo, the tone can be transformed to be soft and deep suitable for sad songs. Most importantly, it is a full-sized guitar playable by a lady with small hand and short arm like me!
000-28EC[10] and 000-28ECB: Two of the five “Eric Clapton” models. Same body size as the 000-15, but with the Martin short scale (24.9″). This artist signature model is constructed with higher-quality woods (especially the more expensive 000-28ECB constructed from Brazilian Rosewood, hence the “B”), a different shape to the neck, and more ornamentation around the edge of the body.
Predating many of the newer brands on this list is another Californian company – B.C. Rich, who has been producing heavy rock guitars since arriving on the scene in 1969. Since the seventies, B.C. Rich has been a name synonymous with high-quality electric guitars featuring weird and wonderful shapes, including the Warlock, the KKV and the Mockingbird.
Danelectro's new '59XT guitar was an exciting announcement at NAMM 2018, and we're stoked to have a chance to test out this sharp-looking axe. Control-wise, the guitar keeps it simple, with a three-way pickup selector switch stacked above tone and volume control knobs, but it ups the game with a Wilkinson tremolo and a lipstick pickup. Watch along as Andy tests out the Dano's sound, and look below for more information about how to get one of your very own.
Festive music track with cheerful and happy mood, with “We Wish You A Merry Christmas” song melody. I’ve included in pack different logo and looped versions of this track, for your comfortable using. This celebratory track can be used for Winter Holyday projects, children arcade games, as New Year jingles, advertising and Youtube commercial video. Enjoy!
Except for the Epiphone Les Paul Express’s total domination of the mini guitar category, there was no clear leader among the guitars, and our picks are the guitars that got the best average ratings. Our testers found lots to like in many of the guitars we tried, and you may find an axe you like better in our competition section below, where we include comments on all the guitars we tested.
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker

Lots of people tend to research for months about which is the best electric guitar when what they really need is to get started playing and practicing. Becoming an elite player requires time behind a solid axe picking and strumming. What a beginner needs is an electric that is generally great so they can learn over time what specific nuances they care about, and that's what we discuss and share today...
Fantastic article. I pretty much do all of my recording nowadays through my AxeFX II. Paired with a good set of studio monitors, it’s perfect for the at-home musician who does not want to sacrifice quality. I have a nice Tone King amp and pedalboard with nice boutique pedals like the Strymon Timeline, but when recording it’s so much easier to plug the AxeFX into my laptop. I don’t have to fuss about with mics or room treatment. Also, having three big dogs, it’s great to not worry that they’ll start barking in unison at the mailman when I’m almost finished with a “perfect” take.

The best course of action is to set a budget that is reasonable - right at the get go - while also considering the cost for other important gear like accessories, cables, amplifiers and effects, should you need them. A good rule of thumb to follow is that entry-level to mid-tier instruments are great for beginners, while more experienced players will want mid-tier to premium guitars.
The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.

Having spent years developing the JDX 48 and Headload, it only made sense that Radial would develop a solution for guitarists who didn’t want to use an amp at all; hence, the JDX Direct-Drive™ was born! The Direct-Drive lets guitarists choose between three different amp voicings: “Combo”, “Stack” and “JDX 4×12”, with further controls to adjust the brightness of the amp. The guitarist simply plugs in their guitar through their pedals, into the JDX Direct-Drive and out to the board with an XLR cable. There are additional outputs for attaching to onstage amps or speakers as well for guitarists who are more comfortable having volume with them on stage. The engineer can then mic the amp and mix the two signals together to get the best tone out of the PA system.
Rickenbacker manufactures three distinct pickups for their current standard models: Hi-gain, Vintage Single Coil Toaster Top, and Humbucking. All three pickup designs share the same footprint, allowing them to retrofit into most current or vintage models. The tone varies from one style to the next, partially because of the types of magnets used[13] but also due to the amount of wire wound around the pickup’s bobbin.
The humbuckers were smaller than typical, with metal covers and two rows of exposed adjustable polepieces. The pickups and three-way were mounted on a small black/white pickguard, with knobs on the body. Two jacks for mono or stereo output were mounted on the side of the lower bout. The two-octave unbound rosewood fingerboard had dot inlays. Early Preachers had “Preacher” engraved on the lower pickguard and a bridge/tailpiece assembly was similar to that on the Breadwinner/Deacon, with more metal and less plastic. Other versions are seen without the engraving and all-metal bridge/tailpieces, indicating the model evolved. Though no information is currently available on when the transition occurred, based on evidence from later UKs, it happened late, possibly around 1980.
The octave pedal raises or lowers your pitch an octave. This makes a huge sonic impact as soon as it is heard. This pedal will make your guitar sound huge, broad and bass-rich or fierce and piercing - even both. It's best to look for a pedal with a “mix” knob, so that your original tone is not completely lost. One step and you can change the direction of the riff or the entire song. This effect was used extensively by Jimi Hendrix in combination with a fuzz tone, while more modern users include Tom Morello and Jack White.

This guitar is simply phenomenol and the build quality, materials, and attention to detail are just mind blowing! I have a collection of vintage Golden Era Gibsons, Fenders, Gretschs, and Martins, so it takes a very special guitar to impress me. The Kraus OM delivers in every way! Just check out the rosette: Paua shell bordered by curly Koa wood inlayed into a red Spruce top-simply amazing! And the curly koa fretboard binding is a sight to behold! The Honduran Rosewood is becoming exceeding hard to find, and will probably go the way of Brazilian Rosewood as a protected wood soon. The Honduran Rosewood used on this guitar took months to source, and it looks spectacular! The guitar itself took 16 months to build, and the wait was well worth it, and well beyond expectations!
It’s yet another Hal Leonard book (that guy really wanted you to learn to play), with the same audio perks as the guide above. This guide is perhaps a little over the head of most beginners, but if you grapple with it early, the rewards could be considerable. Fourteen scales across 96 pages means this isn’t an enormous volume of information to digest, so give it a whirl.
Original Martin OMs from approximately 1929 to 1931 are extremely rare and sell for high prices. Many guitarists believe that the OM—a combination of Martin’s modified 14-fret 000 body shape, long scale (25.4″) neck, solid headstock, 1-3/4″ nut width, 4-1/8″ maximum depth at the endwedge, and 2-3/8″ string spread at the bridge—offers the most versatile combination of features available in a steel-string acoustic guitar. Today, many guitar makers (including many small shops and hand-builders) create instruments modeled on the OM pattern.[5]
{"id": "J40301", "categoryId":"site5AAG", "name":"Les Paul Special Vintage Edition Electric Guitar", "pageUrl":"/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut/J40301000005000-00-180x180.jpg", "hasFeatures":"1", "isAccessory":"0", "message":"", "value":"149.00", "priceMin":"149.00", "priceMax":"149.00", "msrp":"248.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"64", "brand":"Epiphone", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"20", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"93895071200", "priceVisibility": "1", "itemType": "New"}
In addition to choosing between laminate and solid wood, you also have to consider the type of the tonewood. Of particular importance is the choice of top wood, because it greatly affects the resulting sound. Spruce is popularly used for the tops of acoustics because of its punchy and bright tone. Mahogany tops on the other hand is preferred for its warm tone, with more emphasis on the lower mid frequencies. There are other types of wood that fall between the two, each one bringing a subtly different flavor to the resulting sound.
As early as 1924 or so, Lloyd Loar had experimented with amplifying acoustic instruments, though it would not be until the ’30s that his efforts would pan out (without great commercial success). He was undoubtedly ahead of his time. The only amplifier technology available to Loar was primitive radio amplification, hardly adequate for cutting through the horn section. As the ’20s progressed, Hollywood invented “talkies,” and huge valve amplifiers were developed to fill theaters (the music trade press at the time repeatedly published essays assuring musician readers that talkies would have absolutely no effect on the jobs of theater organists!). Part of this technological development included the invention of more and more tubes and the improvement of older designs, which increased the possibilities for instrumental amplification.

Pristine and hi-fidelity are two words that many use to describe the Fractal Audio FX8's sound. Even experts are amazed, like how Guitar Interactive Magazine praised the unit by saying: "it’s easy to say that the FX8 is the most fully featured and best sounding multi effects unit on the market right now". The quality of its reverb and delay got a lot of thumbs up, while other users found its drive and modulation effects to be inspiring.
TC Electronics implemented their TonePrint technology into this stompbox. TonePring allows you to import your own presets, which you previously design using a piece or proprietary software. Such a configuration of features and controls ensures borderline endless possibilities. None of that matters much if the quality of tone itself isn’t on par. In this case, you definitely don’t have to worry about that.
Benefits of this system are fairly obvious. You get to choose which source to use based on the venue you are playing at. Let's say the stage you are about to perform on has a number of large monitors pointed directly at you. In that case, you'd definitely want to stick with a piezoelectric pickup. On the other hand, if there are no monitors around, you can use both or only the microphone. Alternatively you can mike your acoustic guitar with external mics, which is great in isolated situations such as a recording studio.

With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.
Tags: 335 harness 335 wiring harness ES335 harness Firebird Harness Gibson Firebird Harness Guitar wiring Guitar wiring boards Guitar Wiring Harness Guitar Wiring Harness UK Guitar Wiring Harnesses Guitar Wiring Harnesses UK Guitar wiring loom Handwired Harness Home of Tone Home of Tone Blog Home of Tone harness Home of Tone Harnesses Home of Tone pre-Wired Les Paul Harness Les Paul Harnesses Pre-Wire Harness Pre-Wired Guitar harnesses Pre-Wired Harness Pre-Wired harness UK Pre-Wired Harnesses Pre-Wired Home of Tone harnesses Sg Harness Strat Harness Stratocaster Harness Stratocaster Harnesses Tele Harness telecaster Harness

Reverb – The best analogy for reverb effects would be playing your guitar inside a pipe. That’s an extreme level of reverb, of course, and these pedals will allow you to go from there all the way back to subtler effects like the natural reverberation of a concert hall. This effect sounds great with a clean tone, but beware of using it with heavy distortion or else you might lose too much definition from your sound.


I work out of my home shop in Idaho Falls, Idaho. I do repairs for clients and guitar shops all over the United States. I’d love to help you repair or restore your guitar. Repair prices are based on a rate of $60 per hour. These prices apply to guitars in otherwise good working order. Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss. Consultations are always free.

click on the red highlighted portion of instrument that you want to download then click win 32 for 32 bit operating system..then copy the dll file and paste it into c:/program files 86 :/imageline /flstudio/plugins/vst and paste here refresh the fl studio by going add then channel and then more plugins and start scanning ..find that instrument by name and enjoy
Modulating Offset: The output of solid-state amplifiers is directly connected to 2 DC power supplies through the output transistors. The instantaneous non-symmetry within the music waveform (particularly from the bass notes) is averaged as a modulating DC offset. This modulating offset is small, but it varies the efficiency of the speaker, introducing inter-modulation distortion, amplitude modulating the music. This problem is mostly eliminated by the trend to use an active sub-bass. In valve amplifiers the output transformer isolates the speaker from the amplifier electronics. No modulating offset can be produced.

During final construction, a small section of the outside corners is carved or routed out and filled with binding material on the outside corners and decorative strips of material next to the binding, which are called purfling. This binding serves to seal off the endgrain of the top and back. Binding and purfling materials are generally made of either wood or high quality plastic materials.
The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.
The Erratic Clutch Deluxe is a unique effect pedal kit that gives you fuzzy square wave distortion as well as a monophonic sub-octave square wave using a total of only four transistors. The two signals can be used individually or mixed together for a raw and sonically rich synthy output. Full of character and quirk, this pedal will give you a truly original sound. The middle knob is the bias control. This adjusts the pulse width in the initial fuzz stage of the pedal. Set this knob to fit your pickups and playing style. The closer to the center the longer the note will sustain but with that comes more chaotic tracking for the divider. Moving it more clockwise or counterclockwise will give you more predictable note tracking on the divider with less sustain.
Some electric guitars such as the Parker Fly Deluxe® have stereo jacks to output both the magnetic and piezo pickups. For this, the Radial PZ-Select™ was born, allowing the different pickup’s tones to be adjusted and switched between without messing with the guitar’s knobs. Guitar virtuoso Dave Martone writes: “I always wanted to be able to turn these guitar sounds on and off with my feet, because my hands would always be doing something and could not get to the switches on the guitar fast enough. Frustration set in until Peter Janis at Radial contacted me and work began on the PZ-Select. There were approximately four prototypes made as we went through the necessary changes and then BAM!!! An amazing unit was born! No longer do I need that clunky cable. I use a regular TRS cable and that’s it! No more grounding issues or phase issues!!! The PZ-Select gives me full switching capability with lights to tell what channel is active! Tuner out! Piezo FX loop! Drag™ control! XLR balanced Piezo out and the list goes on!”
Here are our choices for the five best YouTube channels. We made sure they all have plenty of content for novice players, but you’ll find lots of videos for advanced musicians, too. Some of them are hosted by people who are simply passionate about playing guitar and want to share that passion without trying to make a million bucks out of you. Don’t forget to show them support.
AMAZING. Awesome place. Will NEVER go anywhere else for guitar work again. I am sitting in the parking lot of this place writing this on my phone, THAT'S how good of an experience I had. I wanted the action lowered on two acoustics and a strap button put on. I called 6 different places around town, each one quoting me prices ranging from $50-$60 for the setup (action adjustment) and another $10 for the strap button. I called Franklin Guitar and Repair and was quoted at $25-$30 for the setup and $5 for the strap button. What a steal! So I took both guitars. He looked at one and said all it needed was minor adjustments, which he did right then and there for free. The other, he kept overnight to adjust and add the button. I picked it up today. $15 TOTAL. What a wonderful person, awesome shop, honest, quality people. And for a steal. Cannot recommend enough!
By 1968 (and probably with the union of Unicord), Merson and Gulf + Western, Univox amps had begun to employ a Japanese-made chassis in Westbury-made cabinets, still with the high-quality Jensen speakers. These combined tube output with transistorized components. They were covered with a black Rhinohide vinyl and sported a silver plastic logo with stylized block letters – initial cap with a little tail off the left followed by lower case letters – typical of the earliest imported Univox guitars, on the black grillcloth.
For beginners, it’s important to have a guitar that is easy to play and stays in tune. But cosmetics, body style, electronics, and tone matter too. Often, a beginner may have a favorite guitarist who inspires them to play. Check out what guitars their heroes play and try to aim for something similar. Your budding country star may not be very enthusiastic about the pointy guitar with skulls, but they will probably fall in love with a classic. (Don't worry if some of these terms are unfamiliar—we'll address them below.) You may choose something different, but this is a good starting point in determining which guitar is likely to inspire your up-and-coming guitar prodigy.
In this section we look at the overall performance of the guitar. How does it feel to play and what does it sound like? The ultimate sound you achieve will largely depend on the amp you play through, but the guitar itself will play a huge part in sounding good. Do the pickups give enough clarity? How comfortable is the neck to get up and down? Is it built for speed? The more expensive a guitar, the better the performance should be, and this is taken into consideration when rating it.
I like the pseudo PTB scheme where the tone cap (I prefer .033 or .022mF) is attached to lug 3 of the pot and to ground. Lug 2 is connected to the Volume pot’s lug 1 and there’s an additional small cap (0.001mF or smaller) connected between tone pot lug 1 and Vol pot lug 2. Assume both pots are Log types: with tone at 7.5 (ie halfway along the pot’s sweep) there is no appreciable treble cut, and the volume pot gives a pretty even tone throughout its range. With tone pot higher than 7.5 bass is cut as you roll back the volume, with tone pot lower than 7.5 treble is cut. Minimum bass setting – vol approx 3, tone full up. Minimum treble setting vol full up, tone full down. I have this in most of my guitars and love it.
Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Description: Guitar Type: Bass - Body: Ash - Body Construction: Solid - Neck Wood: Maple - Neck Construction: 3 Piece - Nut Width: 42.5mm - Fingerboard: Rosewood - Frets: Medium - # of Strings: 4 - Scale Length: 34" (86cm) - Headstock: 2+2 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome - Pickups: CAP Double Humbucker - Pickup Configuration: H-H - String Instrument Finish: Natural, Black
It's interesting how one of the biggest brands in guitar amplification was built by a drummer! The story goes that professional drummer Jim Marshall was inspired by Pete Townshend, Ritchie Blackmore, and Big Jim Sullivan to develop a louder and better sounding amp. And he went about it by looking at a popular American amp design (i.e. Fender Bassman) and finding ways of how to improve it. After many prototypes, Jim and his team eventually came up with an amp that had their own "Marshall sound", this amp inherited the JTM label, an abbreviation of Jim's and his son Terry's names. The rest as they say is history, with Marshall being one of the most familiar amplifier brands, even to none musicians. Their brand is still the amp of choice for a long list of virtuoso guitarists, including Jimi Hendrix, Jeff Beck, Eric Clapton, Jimmy Page, Slash just to name a few. While their vintage and professional level amplifiers are still very much in demand, the company is not doing as great in the entry level to mid-tier market - which really is the bulk of where sales and reviews of come from. Still, their fans gave them enough good feedback to make it to this list, thanks to the improvements they are making to their entry level line of amps.
Fred’s wife Lynn Shipley Sokolow served as our adult student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. To evaluate the short-scale/travel guitars, I also consulted a couple of teenagers who are currently learning how to play: 15-year-old Alana Wood, who helped us on our Best Acoustic Guitar for Beginners and Best Ukulele for Beginners reviews, and 13-year-old Charles Lesser.
The Gibson Firebird immediately comes to mind. This is a smaller, more rounded Explorer-style guitar first produced back in 1963, and it has undergone a wide range of incarnations since. The modern Gibson Firebird HP has a neck-through design with mahogany body wings, a mahogany/walnut neck with a rosewood fingerboard, 495R/T mini humbuckers, and a reverse headstock.
Before I got this guitar, I purchased a classical "starter" package that had crazy good reviews on Amazon. I have been playing guitar on and off for a few years but I would still classify myself as a beginner. In addition, it was my first classical guitar. I was extremely disappointed with the starter package (Yamaha) guitar. Chords sounded awful, and subtle chord changes, such as cadd9 to g were lost in the deep, bass sound. I understand that classical guitars are mainly for finger picking, but I need a guitar that can do both.
A far cry from just another mass produced vintage looking guitar, the Kay Vintage Reissue Series successfully duplicates the original 50's models, within feel, playability and the legendary Kay sound. Complete with the company's gold chevron, flagship headstock design, displaying 3-D raised "Kel-von-a-tor" style emblem, to this day, the Kay Thin Twin Electric Guitar is probably one of the coolest looking guitars ever made.
My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much. She was disappointed when she noticed the strings were loose. We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it. He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills. He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?! We will definitely be coming back!
Rock ’n’ roll is an industry that’s continually pushing musical, social, and cultural boundaries, and the electric guitar is its iconic instrument. The acoustic version has been around since at least the 16th century. So when I first started working with co-curator Gary Sturm on an exhibition about the invention of the electric guitar at the Smithsonian’s National Museum of American History, our driving question was: Why electrify this centuries-old instrument? The simplest answer: Guitarists wanted more volume.
In 1979, there was a benefit for Amnesty International called “The Secret Policeman’s Ball”. Pete Townshend played acoustic versions of “Pinball Wizard”, “Drowned”, and (in a duet with classical guitarist John Williams) an astonishing version of “Won’t Get Fooled Again”. Unfortunately the soundtrack for that show has never been available in the CD and digital download era, but you can often spot these performances on YouTube. Highly recommended.
Morris D-41 copy vintage 1980s Japanese high end hi class Exotic Brazilian Jacaranda Rosewood tone woods body it has detailed fancy inlay perfling and in in amazing condition. Here we are proud to present to you a Classic dreadnought high quality Guitar made of vintage aged tone woods with impeccable workmanship and top quality materials fit and finish rivals the best of the best. This guitar was made by the premier custom shop builders of Japan in the Terada factory and are well known for making Ibanez's top of the line series guitars like the Artists - musician- the George Benson line as well as many others Some of the great Aria's top of line guitars and a few other makers they have the great woods and skills to make some of the finest instruments made period and this Morris is one of them. Just have a good look and you'll see for yourself. One of the finest D-41 type guitars made She's approaching 40 years old and in superb vintage condition I'm looking for dings still and don't see them it's really in sweet condition WOW it's rare to find such fine examples like this all round nice I suspect this beauty will not last long. She is currently in our JVGuitars shop for a full set up and will receive a JVG-Martin upgrade which consists of new fit Martin bone nut & compensated saddle set a full fret dressing and polishing and a beautiful resonant set of solid ebony bridge pins with brass ring and inlaid Abalone detail as well as a new set of Martin 80/20 phosphorus bronze strings and a full body polish. Just in pics soon to come. To enquirer contact Joe: jvguitars@gmail.com .
A phaser uses a filter to sweep the frequency range of the audio input and mixes that with the original audio signal. When the signals are mixed the portions that are out of phase (or out of alignment with each other) cancel out and produce a swirling, shoowsy sound. This effect was very popular in the 1970’s and heard on countless recordings of the era in nearly every musical style.
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.
This is just what a guy or gal needs to help him or her make an informed decision on making a electric guitar purchase. All the topics and explanations of the given topic, pick-ups, machine heads etc… were easy to follow and understand. Not a lot of tech talk that would either confuse or intimidate a perspective buyer, that is a feat in its self kudos to your writers. keep up the good work.
The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.[24]
One notable exception is a pitch shifter or harmonizer, particularly if you plan on using a pitch shift and envelope follower together as the pitch shifter may have greater difficulty accurately tracking an envelope follower-processed signal. Similarly, a standard wah pedal generally sounds best in the very front of the signal chain, but once again I recommend placing pitch shifter/harmonizer effects in front of a wah if you plan on using both together. Also, many players prefer the sound of a wah with a distortion pedal placed in front of it as this configuration can produce a more dramatic or more refined sweep depending on the distortion pedal’s tonal character (See Example 1, below).
Plate reverb and spring reverb were the first attempts to simulate reverb in a portable device. The plate and the spring, respectively, are made of metal and attached to a transducer. The signal is fed to the transducer, which causes the plate or spring to vibrate. Reverberations bounce around the plate or spring. A pickup at the other end, converts the spring or plate's vibrations back into an electrical signal.
it has 3 lateral braces after the soundhole, 1 before, so I guess so. the saddle makes it so the truss is the only set up option. The action is high right now for me, so I hope a decent allen wrench will turn it and its not an old peice'o'poo worn out latter brace deal. when I looked for a "belly" it could have just been straight tilted over I guess and not looked the same.

This is another 6 stringed electric guitar form the Givson brand. It is a right handed model and is wooden in color. It has a solid body of basswood and kneck of rosewood. It is provided with high quality cover and the best part is that the guitar is budget friendly. Prices range from around INR 7,100 depending on the prevalent market factors such as whether there are offers or discounts available. You can find more details regarding this model by clicking on the link below:

If you’re looking to get this pedal as a first in your arsenal, then don’t worry at all, you can keep it simple with the offered Reverb dial as it offers high-quality effects which you can tune to your liking. This astonishing “stomp-box” by TC covers guitarist’s needs who possess different ranges of experience, all available at a fantastic startup price.
SOLD OUT : in AMAZING Top vintage condition, Plays with ease with nice low action. Solid Sitka Spruce Top amazing Brazilian Jacaranda Rosewood back - sides -Fingerboard - bridge & headstock overlay, bindings are figured and flamed maple wow what a classic beauty. if you have been thinking of getting the late model Glen Fry F360 for $1700+ think again...OWN Vintage , matured aged exotic woods is what make the greatest sounding guitars this baby has it at a great price.. buy the new Tak and 2 years later its worth %%% less, not these exotic tone woods vintage guitars they are going up...mark my words you will do well with this baby... in top all round condition really well cared for and maintained. This guitar is in the upper percentile quality & workmanship just about as good as it gets and dare I say it ...this will give a Martin a real good run for its money folks... Get this RARE beauty before she's gone.. you will not be disappointed. Email Joe at JVGuitars@gmail.com .
In 1931, Martin reintroduced the dreadnought with X-bracing and two years later gave it a modified body shape to accommodate a 14-fret neck, and it quickly became their best-selling guitar. The rest of the industry soon followed[citation needed], and today the “dreadnought” size and shape is considered one of the “standard” acoustic guitar shapes, iconic for its use in a wide variety of musical genres.
Here are our choices for the five best YouTube channels. We made sure they all have plenty of content for novice players, but you’ll find lots of videos for advanced musicians, too. Some of them are hosted by people who are simply passionate about playing guitar and want to share that passion without trying to make a million bucks out of you. Don’t forget to show them support.
Every new 2008 Les Paul Standard will benefit from Gibson’s proven chambering technique, which leaves each guitar with perfect tone, balance, and weight. Prior to gluing the maple cap on top of the mahogany body, the expert craftsmen at Gibson USA carve out carefully mapped-out chambers in the body using a Computer Numeric Controlled (CNC) router. The positioning of the routes was established after careful examination of the resonant characteristics of the Les Paul. Gibson approached this process with the awareness that every change to the formula would have repercussions on the instrument’s sound. So, in addition to relieving the stress on a player’s back and shoulder, these lighter Gibson guitars also enhance the tone palette in a manner unique only to these guitars. The results are comfortable, lightweight guitars that are acoustically louder, with increased sustain and resonance.
Make your next guitar one of a kind. Every luthier set sold by OregonWildWood is visually unique and distinctive - even sets within the same species vary greatly in color, contrast and figuring. You'll find the largest online selection of guitar woods available - all special within their own right. All are exotic, beautiful, unique and superior. Each set is individually pictured giving you the opportunity to choose the perfect one for your next guitar.
A sub-brand under the same umbrella as German brand, Behringer, Bugera has been flying under the radar for some time – though they make some surprisingly clever amplifiers. The BC15 is one such amp. Styled like its predecessors from the ’50s and ’60s, this vintage-inspired amp benefits from a single 12AX7 vacuum tube giving it a lot more warmth and character than for which you’ll pay. And don’t let its size fool you, either – while it only has a single 8″ speaker, it offers up a whopping 30 watts, making for a surprisingly loud little machine. For the price, it’s seriously difficult to do better than this.

I'm actually the designer of this devices and I myself had bought all the software in Apple. I'm really a big fan of JamUp, Bias, and Ampkit. Personally I like all the functions provided by JamUp such as JAM, LOOP, 8-track recording as well as the guitar effects and amps. But the Amps in Bias is a litte more juicy than in JamUp. A good way is using Bias amps in JamUp which just make a good combination of the two software. They can be used in that way :)
Many modern processors have such great presets you'll never need to get delve any further to create your own. However, almost all units with presets allow you to easily create your own favorite presets. You can start with a factory preset, tweak the sounds to your taste, then save it in your own location to be recalled at the touch of a button while you're playing.

Before I get started, one quick note of caution. Because you need to play 'through' Cubase in order to hear the effects, you'll need a low-latency system — which means a fast computer, and a good audio interface, with quality ASIO or Core Audio drivers. Even if an interface has a 'zero‑latency' monitoring feature, that won't do you any good, as it will simply route the input signal to the output, without going through Cubase or any of its plug‑ins, which kind of defeats the purpose… Preferably, you should also have an interface with a high‑impedance input (suitable for guitar and bass). Many modern interfaces have an 'instrument input' which will do the job, but if not, you'll need to use a guitar‑friendly preamp, compressor, or similarly 'neutral' effect to feed a line input (or use a DI box).
By the late 1950s, the Les Paul was considered “staid and old-fashioned” as well as too heavy and expensive, no longer competitive with the Stratocaster, and by 1961 Gibson stopped producing the traditional Les Paul in favor of a lighter redesign called the SG. The mid-1960s, however, brought a resurgence of interest in the Les Paul, a development credited to one man and one album: Eric Clapton, using a Les Paul plugged into a Marshall Bluesbreaker amplifier as recorded on Blues Breakers with Eric Clapton (the “Beano” album, 1966),[13] set the standard for tone for a new generation of guitar players in blues and rock and roll (see Keith Richards’ contribution to the Les Paul legend below in the section ‘Renewed interest in the Les Paul models’ below). [14][15] Clapton was initially followed by American guitarist Michael Bloomfield and British guitarist Peter Green, and the subsequent rise in the instrument’s popularity was such that by the late 1960s Gibson reintroduced an updated Les Paul and a variety of other instruments “in its mold”, including a bass guitar.
Gibson: These guys have been making musical instruments for well over 100 years. Founded by Orville Gibson back in 1890 and not producing guitars at the time (and certainly not electrics because those hadn’t even been invented yet), Gibson has had plenty of time to cement itself as one of the leading guitar companies. They are one of the few to keep their main brand name as a prestige-only brand and applying a different brand name (Epiphone) to their imported, lesser-priced instruments. They invented the arch-top guitar and created some of the most iconic instruments in guitar-history. These includes their by far most famous model, the Les Paul. Other iconic models are the SG, Explorer, Flying V, ES-175 and the Firebird. The ES-175 was to become the first really popular electric guitar. This happened before solid body guitars had even been invented. To this day, the Gibson Les Paul remains one of the most desirable and expensive guitars in the world. In order to tap into various price-points, Gibson creates less expensive Les Paul models around the $1,000 range, like the very popular Les Paul Studio. The more expensive models such as the Les Paul Standard are up in the $2,500+ range. Finally, there are even more expensive models such as the Les Paul Custom in the vicinity of $3,000+. Off course, they also create some very special limited run guitars than can easily fetch close to the $10,000 mark. In line with the car analogy earlier: While not Italian, I’d be happy to call the $2,500+ Gibsons the Ferraris of the guitar industry.
A. Most electric guitars have several control knobs on the body. The amount of knobs and what they do can vary, so it's worth experimenting, but we'll go over the most common configuration. The majority of electric guitars have three control knobs and one switch. One control knob is for volume and the other two are for tone, with one controlling the neck pickup, and the other controlling the bridge pickup. The switch is to change between using the neck or bridge pickup.
WOW! This thing is incredible. One of the nicest instruments we have ever played and we've had, played and sold a few hundred over the past 20 years! Can't say enough about this bass. It's a pre-owned Zon Legacy Elite series 5-string model featuring a beautiful book-matched solid Bubinga wood top over a solid Mahogany wood body. A solid graphite neck / fingerboard utilizing a sculpted body neck joint finishes off the basic construction of the instrument. Huge tone is delivered via 2 active Bartolini pickups that feature controls for volume, bass, midrange, treble and balance. This bass has had the electronics modified by Zon to move the midrange control from the access hole in the back cover to a matching pot located in the control section on the front of the bass. While at Zon to get the custom electronics installed,  the original owner had new frets and a new finish coat added. Figured as long as it was there "what the heck". Tuning is accomplished via the 5 German made Schaller tuning machines in the same gold plate finish as the solid cast bridge. The solid graphite neck features a full 2 octave neck with 24 frets and a 34" long scale. This bass is a dream to play! Just about as good as it gets. There's not a mark on it anywhere. It looks brand new! Rock solid and stays in tune. Set up perfectly! Includes original Zon Soft exterior hard shell case on black Cordura.

{ "name": "Vintage Sunburst", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000004000", "status": "backorderable", "statusText": "Back Order", "pimStatus": "R1", "inventoryText": "Reserve now - Ships 11-05-2018", "inventoryKey": "available_date", "availableDate": "11-05-2018", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000004000", "displaySku": "J40301 000004000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000004000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"true", "invMsgPreOrder":"false", "invMsgPromiseDate":"11-12-2018", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Vintage-Sunburst/J40301000004000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Vintage Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }


All product names, logos, and brands are property of their respective owners, and are in no way associated or affiliated with The Top Guitars.  Product names, logos, and brands are used solely for the purpose of identifying industry-standard products and brands used by The Top Guitars for the business of post production sound, and any related awards or honors therein. Use of these names, logos, and brands does not imply any co-operation or endorsement.
Many compressor pedals are often also marketed as "sustainer pedals". As a note is sustained, it loses energy and volume due to diminishing vibration in the string. The compressor pedal boosts its electrical signal to the specified dynamic range, slightly prolonging the duration of the note.[92] This, combined with heavy distortion and the close proximity of the guitar and the speaker cabinet, can lead to infinite sustain at higher volumes.
This is the first, and quite possibly the best reason to invest in a good miniature guitar amp. It will allow you to play with a tone that’s enjoyable at a volume that won’t get you kicked out by your condo board. Even if you live out in the middle of nowhere, and can blast your Dual Rectifier full stack as loudly as you’d like, you still have to take the feelings of those you live with into account. Few marriages remain happy when a loud instrument is in the mix. That’s also why a mini amp is a great gift for a young student guitarist. You won’t have to hear them butcher the relatively simple line from a David Bowie tune for days on end.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!
Sometimes, I find the way that they progress songs odd, and that it actually makes them more difficult by causing you to use screwy timings, use easy and incorrect finger movements that you have to completely change when new notes are added, or when it would be simpler to just use cords (for example, in higher ground there is a part where you first play through and have a G and then an A on the 6th string. A beginner will probably play the G with the index finger and then the A with the ring finger. But later these turn to power cords and this no longer works as you have to slide your hand down. I've found that type of issue common, particularly with this song - I've only played about 6 songs so far in the game). Likewise, the strategy of playing is not always the best, for example they'l play a 2, 3, and 6 on the 6th string and maybe an open 5th string and the 2nd fret of the 5th string. Much easier and more efficient to convert the 6th fret on the E string to the 1st on the 5 string to keep everything within a reasonable reach(cheating by moving the note does work since the game is based on tone, but is not something a beginner would know)
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Bronze, Black
The Effect: Bass guitars are the core of every band. Along with drums, they make the rhythm section. Because of this, bass players are seen as ‘background members’ in a band. With that said, bass guitar offers much more range than that. Following the footsteps of legends such as Lemmy Kilmister and others, we can see that bass guitar can be the star of the show. All you really need is a good distortion pedal. Finding one may prove to be trickier than it seems. Your average guitar dist pedal may work, but chances are you will get better results with something like Tech 21 RIP Red Ripper. This is adedicated dist box for bass guitar, which covers the low end segment of bass tone and gives you some advanced tone shaping options. A proper bass dist box can really make all the difference if you are looking for proper sound.
When we talk about instruments, sometimes the guitar gets all the credit. Of course guitars are great, but an electric guitar on its own—even a hollow-body—is only so loud. For giving one of the world's favorite instruments its voice, guitar amplifiers deserve a little love too. These amps and speakers are the powerhouses of your audio setup, turning your guitar's output from a simple electric current into those familiar sounds.

Solid Body Guitars: For those looking for a more versatile array of tones blended with the deepest number of volume options and full-blooded sustain, the electric solid body is the right machine. The differences between various types of solid body models are vast — even between an SG, the most popular model Gibson makes, and a Les Paul, Gibson’s six-string flagship. A wide variety of tone woods, including mahogany, maple, alder, spruce, maple and, commonly for the fretboard, rosewood and baked maple, are employed. They are extremely versatile instruments and have been spotted in the hands of players as wide-ranging as Les Paul and Zakk Wylde.
Forget Risky Business (remember the famous scene of Tom Cruise rockin' out in his boxers?); this technique, which I consider real air guitar, is serious business. It entails capturing the airy, percussive sound of the plectrum strumming or picking the electric guitar's strings-either in acoustic isolation or combined with the ambient sound from the amp-and then mixing this sound with the recorded amplifier sound. The addition of just a little percussive plucking can enhance the presence wonderfully for any style of guitar playing. In my opinion, it's the greatest studio-recording innovation since John Bonham's distinctive drum sound.

Nashville studio engineer Glen Snoddy discovered the Fuzz-Tone sound when recording Marty Robbin’s 1960 hit “Don’t Worry About Me.” Allegedly an overloaded transformer blew in a Langevin tube module, transforming Grady Martin’s bass guitar into a distorted, heavy fuzz. Some put the event down to another case of amplifier malfunction. Either way, Martin continued to use the tone throughout 1961 while Snoddy transistorized the malfunctioning circuit through trial and error, and sold it onto Gibson in 1962.


This has always been one of the most revered brands of guitars amongst professional musicians. They sell one of the most affordable and durable electric guitars. The acoustic and classic guitars sold by this brand are ideal for students and beginners. The dreadnought sized body with cutaway has a Sitka spruce top with nato back & sides. The neck has 20 frets & dot inlays on the fretboard and made of nato. The bridge and fingerboard are made of rosewood. Yamaha’s own System55T. The starting price of a Yamaha acoustic 6-string guitar is 6990 INR.approximately.
The electric bass was invented in the 1930s, but the instrument did not sell well until Leo Fender developed the Precision Bass in the 1950s. As such, the type of bass players who first began trying methods to make their instruments louder with amplifiers and speakers were upright bass players. While the upright bass is a large instrument, standing about six feet tall (with its endpin extended), due to its low register, it is not a loud instrument when played acoustically. This is largely a result of the decreased sensitivity of human hearing, which is most sensitive to mid-range tones; equal perceived loudness for a mid-range sound and a low frequency sound requires much more acoustic power in the low-frequency sound. In the 1890s and early 1900s, upright bass players performing in bars and brothels in an era before amplifiers and speakers were available, particularly those who performed in bands with louder instruments such as trumpet, often found it hard to be heard. About the only solution available in the pre-amplifiers era was playing slap bass, a style of slapping the strings against the fingerboard to make a relatively loud percussive sound. Beginning in the 1920s, the first amplifiers and speakers designed for gigging musicians became available.
Thanks for the post on ’66 Deccas and the video. I have a red sunburst DMI-203 with the chrome pick guard as in your picture. My first electric guitar in 1966 was the same instrument with no name on the headstock but with paperwork saying GHI/Heit. Bought it in a department store plus a Concordia amp for $50. Sold it in ’69 when I needed cash for a car (for $75!). I picked up the Decca about 10 years ago. Vintage Guitar magazine did an article of some work done on it in it’s Jan. 2014 issue.
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]
Great guitar for the aspiring 4-10 yer old. This Lotus 20.25" scale, Kid's Strat copy is in excellent condition! Featuring a maple neck, an unbound rosewood fret-board, simulated mother of pearl fret marker, dot side markers, graphite nut, 6 "in-line" head stock, and an adjustable truss rod. 3 strat style, single coil pickups with 5 position selector. Volume and tone controls. (While not photo'd, the guitar does include the whammy / tremolo bar). This guitar is in great shape with virtually no wear to the original gloss black finish. I actually special ordered it when I worked at Colorado Springs Music Company for my son. I think he took it out of the gig bag a couple times. Comes with a thick padded "codura" gig bag.
I have a beautiful 2003 Ltd and my friend who has played for many years has the Taylor and he ended up borrowing my tak for five months he didn't want to give it back you know the guy has played with some well known folk's so I trust his judgment played with Keith Green and America and I have played over thirty years so I haven't let to many go by without some trial and ownership this tak is as good or better than the best Martin can offer. Ovation can't touch it and of course Gibson is too soft for me I own a fender and a Yamaha 6 and 12 for the money you can't beat a yam and I have played hummingbird to dove guild gretch Washburn breedlove which is a favorite not many I haven't played so with all this my top ten is Takemine Martin Gibson Breedlove Hagstrom Taylor Guild Gretch Washburn and Yamaha. If you can find a Hag it will blow your bag I have a 1971 Hagstrom acoustic I believe it was a demo for Golden Earing it was a gift from an old friend from Deutschland any way I will say ...more
{"eVar4":"shop: accessories","eVar5":"shop: accessories: fretted instrument accessories and parts","pageName":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps: el dorado","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: accessories: fretted instrument accessories and parts","prop1":"[mf] shop: accessories","evar51":"default: united states","prop10":"brands","prop11":"el dorado","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category5"}
And its not just all about the looks, because this guitar comes with impressive specs for its price point. It has a solid spruce top, mahogany back & sides, rosewood fretboard and built-in electronics, all of which meet Epiphone's quality standards. It would have been nicer if an all-solid body version was available, but I guess it would be a problem for the premium Gibson version. Playability is also one of this acoustics strong points, following traditional specs that include 25.5" scale length and 1.68" nut width. If you're looking for an affordable workhorse guitar that will give you "satisfaction", then check out the Hummingbird Pro.
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton
Official Vintage Guitar Price Guide: This print guide, published by Vintage Guitar and Bass, is an annual guide that is re-published with updated information each year. The webpage above is handy because it shows links for all guides that have been published in one place and will continue adding links for future years. The link shown for each guide will take you to a store online where you can purchase the guide. It is known for being extremely thorough, and its latest edition, the 2017 guide, has appraisals for 2,000 brands of guitars, basses, amps, effects, mandolins, steels, lap steels, ukuleles and banjos.
A multi-effects device (also called a "multi-FX" device) is a single electronics effects pedal or rack-mount device that contains many electronic effects. In the late 1990s and throughout the 2000s, multi-FX manufacturers such as Zoom and Korg produced devices that were increasingly feature-laden. Multi-FX devices combine several effects together, and most devices allow users to use preset combinations of effects, including distortion, chorus, reverb, compression, and so on. This allows musicians to have quick on-stage access to different effects combinations. Some multi-FX pedals contain modelled versions of well-known effects pedals or amplifiers.
×