This site is for information only - we don't sell vintage guitars - but do check out our Vintage guitar collectors pick list: a regularly updated selection of rare guitars, vintage catalogs, or unusual items currently that we've found for sale on the web. We especially like to feature Vintage guitars with a story! If you're selling something interesting yourself, get in contact and we can help promote your item.
We've had a thread here in the last couple months about Squires, with some pretty discerning forum members praising their quality and tone. You don't need to spend a lot of money these days for a good guitar. The one the OP bought was years ago. The fierce competition in the guitar market since the economy went bad, has forced manufacturers to up their game, and recent production is of a much higher standard.
A guitar needs to receive regular maintenance if it is to keep its intended levels of playability and sound quality. Caring for a guitar involves a process known as a setup. This describes a group of fine-tuning procedures that work together to bring the instrument to its highest potential. The cost of a guitar setup is often well worth the value of the service. New strings will be added, their height adjusted, intonation will be set, and the neck may be adjusted to allow for the proper amount of relief in the wood. Most guitars need to be setup at least once a year to account for swelling of wood and shifting of parts that are caused by changes in humidity. Guitar setup cost is usually around $50, but can fluctuate wildly depending on what adjustments are needed for your specific instrument.

In attempting to amplify acoustic guitars, inventors and musicians alike soon discovered an issue that is still problematic for many of today’s acoustic guitarists — feedback. Hence, the evolution of solid body electric guitars, spearheaded by Vivi-Tone in 1934. Rickenbacker followed up by distributing the Electro Spanish in 1935 (Electro Spanish later being shortened to ES by Gibson for their line of hollow body and semi-hollow electric guitars), and the Slingerland Songster 401 was introduced in 1936. But some guitarists — mainly jazz and blues musicians — came to miss the warm, full-bodied tone that can only be generated by the free-space resonance of tops and backs made from quality tonewoods. And so it is that we also have the hybrid design of semi-hollow body electric guitars.
I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.
Acoustic necks are usually listed as 12- or 14-fret necks. This number refers to the number of frets above the guitar body, not the total number of frets. On a 12-fret neck, the 13th and 14th frets will be on the body, and, thus, harder to reach than on a 14-fret neck, where they are extended beyond the guitar body. If you have small hands, look for an acoustic guitar with a smaller diameter neck.

After you've made your selections from the best selection of guitar and bass tabs, you'll want to download the apps for your Android, iPad, iPhone, or other device to gain access to your digital library anywhere. The option to print the file is still available, and you will also have all of your sheet music stored in your personal account to access your digital file from any computer or mobile device. If any issues arise, make sure to contact our customer support of musicians, ready to help fellow musicians.

A great app for playing and basic editing of general midi files is Sweet Midi Player which includes a lyric viewer for midis with lyrics/chords. You can load one of the General Midi SoundFonts above to greatly improve the sound quality. For Windows PC use the free program Coolsoft VirtualMIDISynth to install a new GM SoundFont (Get the latest version 2.1.0 for Windows 10).
Lol I agree I'm a nirvana freak, not a kurt freak.... but dam fender all you can make is the same butt ugly designs that you have made for years come up with a compleatly new body design and I mean COMPLETELY NEW and just use the same components or better for a new guitar called, idk caster lol or DOUCHECASTER lol don't matter to me just hive us something new
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
Again, if a Martin guitar needs a neck set, don't try and solve the problem of high string action any other way! Take the guitar to a *good* repair person, pay the money, and have a proper neck set done. A good neck set will make the guitar play and sound the best it can. With the correct neck set and bridge and saddle height, the guitar strings will drive the top of the guitar best, giving the best sound possible, and at the ideal playing action. And after all, isn't that what it's all about?

This final trick is pretty cool for live use because these effects are very efficient, which means that you can have several tracks of 'racks' without straining your CPU. Go to the Mixer tab at File/Preferences/Project, and check 'Enable Solo on Selected Track'. Solo a track, and now all you need to do to call up a new sound is select a track, and the Solo will 'move' to that track. The change from one sound to another is instantaneous. Now it's time to amaze your audience!    
POWER – amps are created for amplifying the sound (duh) in the first place. Of course, nowadays amps are these versatile things that can do pretty much anything but cook you a scrambled egg (maybe SOON?). But power is expensive. This might sound like some deep statement I make as I look into the sunset but what I mean is wattage is not a cheap thing to come by. That is why most inexpensive models or practice models (which are often the same) do not have a lot of wattages. While this might be disheartening, trust me, as a beginner you won’t need a lot of watts. I mean unless you are a prodigy you will be spending a lot of time practicing on your own whether it be in your room, basement or wherever. You won’t be needing the wattage that much unless you are playing with other instruments or on stage. AND if you are going on stage, then you should be great enough not to need a practice amp, in the first place.
With expiration of the Fender patent on the Stratocaster-style vibrato, various improvements on this type of internal, multi-spring vibrato system are now available. Floyd Rose introduced one of the first improvements on the vibrato system in many years when, in the late 1970s, he experimented with "locking" nuts and bridges that prevent the guitar from losing tuning, even under heavy vibrato bar use.
The Boss ME-80 has two modes of operations. MEMORY mode lets you scroll through banks and presets more like a conventional multi-fx unit, and MANUAL mode is what we described earlier, where you can use this pedal as if you had a bunch of effects on a pedalboard and just start tweaking away. MANUAL mode is really where this unit shines, and makes it stand out from other multi-effect pedals. The presets are okay for getting a taste of it, but as is typical of presets many are over the top.

Dave Friedman (Rack System, Ltd.): “Pedal order is a very subjective thing, and I’ve had people do it all backwards because that’s the way they like it. Generally speaking, compressors come before overdrives, modulation things are kind of in the middle, and delays are at the end. The wah is kind of a personal preference. Sometimes it’s in front early in the chain, and sometimes it’s after overdrives.
Best Songs of 2018Best Songs of All TimeBest Singers of All TimeBest Guitarists EverBest Eminem SongsBest Metallica SongsTop 10 Linkin Park SongsBest Green Day SongsRockerboyBest Albums of All TimeBest Female Singers of All TimehayreanmarjonBest Avenged Sevenfold SongsBest Beatles SongsGreatest Music Artists of All Timecamp0112Top Ten Best Music GenresRHCPfan
The Squier Deluxe Stratocaster by Fender is another excellent electronic guitar for newbies. The body is made up of basswood which is a soft, light wood with some of the best mid and upper frequency production. A maple neck and fretboard further assists the mid and high range frequency sound. Its C-shaped neck guarantees the best comfort. This guitar features three single coil pickups. One is assigned for master volume control, one tone control for the neck pickup and one tone control for medium pickup. The five-way switch lets you combine these three pickups and produce the widest range of sounds ever!
When technology changed from valve to solid-state, it was noticed that solid-state amplifiers lacked warmth and bass performance, and had to be twice as powerful as valve amplifiers, to sound as loud. Current Drive: Solid-state amplifiers behave in ‘Voltage Drive’. This acts as a short circuit (zero output impedance, or 100% damping factor) across the speakers, causing excessive damping, which reduces efficiency, limiting responsiveness. Valve amplifiers behave in ‘Current Drive’. This represents an open circuit across the speaker without over damping, allowing maximum response and efficiency.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.

The reason why we love this guitar so much is that the top is made from koa wood. What is koa? It’s a Hawaiian wood that has a very special look to it, with an unusual grain pattern. When you have a guitar top made from koa like this, it just looks very organic and natural, so if you don’t like the plastic-fantastic style, then this is the best way to go!
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
The Afterneath gets a place on our favorites list, largely because of the "Drag" feature that allows you to sort of delay the decay of your reverb effect, giving off an ambiance that trails off behind each original note as it bleeds into new notes. It's a very unique reverb effect, which blends particularly nicely with a fretless bass in the example video below. 
Placing a texture-based effect such as chorus before distortion basically means that the chorus effect will be distorted rather than the distorted tone getting some chorus. That may sound kind or original and appealing to some but trust me – you do not want to waste your distortion pedal effect by distorting an already subtle effect. This very concept is extremely important in determining the correct placement of your effects.
Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.
This happens when discussing variables within a number of different art forms—you simply can’t rely on scientific equipment to make some assessments. You can’t trust the gadgets; instead, you have to rely on your ears. Even relying on your ears can be difficult because it is, once again, a subjective discussion. “We don’t hear what’s out there,” Millard says. “We hear what we think we hear. It’s the psychological or neurological way we hear. To think we hear what sound is out there is so naïve and so wrong.” Trustworthiness aside, this brings us to another concept that pops up frequently when discussing the nature of tone: the role of good old fashioned, organic, human beings.

The S2 Custom 24 features a mahogany body with book-matched flame maple top, that follows the same double cutaway shape and detailed arch as the original Custom 24. The guitar's mahogany neck is also not far off, being rafted from mahogany with PRS' distinctive 25" scale length. It has a 24-fret rosewood fingerboard that has a comfortably narrow nutwidth of 1.656". Finally, the S2 Custom 24 owes its voice to its dual humbucker pickups that include the S2 Vintage Bass and the S2 HFS Treble - which provide PRS' characteristically open and clear tone. You can push or pull the tone knob for single-coil tones should you need them.

Blueridge Historic Series BR-160 Looks good, sounds even better. Blueridge’s BR-160 celebrates the company’s rich history, which is reflected in the guitar’s vintage dreadnought design. The warm, mellow sound it produces also takes you back to the good ol’ days way before the internet came along. Having this guitar is just like having a piece of history in your hands.
Electric guitars are versatile instruments. If you’re not entirely sure where your playing career is headed, pick a Strat-style solid-bodied guitar in a ‘sensible’ colour, and you’ll have an instrument that can do pretty much anything – and one which you won’t be embarrassed to get out of its case when (and if) you get through the ‘death metal’ phase!

EQ or equalization effects work by boosting or cutting specified frequency bands within the sound signal. From treble or high-end sounds such as the sizzling sounds of a riveted cymbal to low-end sources such as the thump of a bass drum or bass guitar, EQ effects don't change the pitch but rather alter the timbre or quality of the sound. Depending on the application, EQ control can be quite precise or very simple.
OK, our math isn't so great, so we've gone ahead and included an 11th amp in this list of 10. Although it's way too soon to be declared "iconic," PRS Guitars' brand-new Sonzera series of amps have been hot topics in gear land since they were introduced at the 2017 Winter NAMM Show. Let's just call them "instant classics." Featuring a rugged steel chassis, custom transformers and road-ready construction, each Sonzera model delivers serious tone with maximum reliability.
Equalizer or EQ pedals have traditionally been used to boost audio signals for solos. If you want to boost the middle frequencies, the EQ will do the trick and provide a tight tone. Some musicians don’t find boosters and EQ pedals to be necessary in a chain, so make sure you do some research to figure out if this type will really benefit your sound

Hendrix, Van Halen and, uh, Mozart are the musicians to thank for most heavily influencing death-metal shredder Azagthoth, not that they really come through in the jagged riffs and cheetah-fast solos of Morbid Angel classics like “World of S—t” and “Where the Slime Live.” But that’s because he has blazed a tension-filled style all his own (when he solos, he enters a mystical mind state he calls the “Temple of Ostx”) that is finally getting more praise than early antics like cutting himself with a razor before hitting the stage and extolling Satanism.
For example, if the note E (the open sixth string) is played over the A minor chord, then the chord would be [0 0 2 2 1 0]. This has the note E as its lowest tone instead of A. It is often written as Am/E, where the letter following the slash indicates the new bass note. However, in popular music it is usual to play inverted chords on the guitar when they are not part of the harmony, since the bass guitar can play the root pitch.
 Everybody needs to start somewhere. However, where you start often decides where you end up. For example, if you buy a bad guitar when you start playing, you are a lot more likely to stop playing, and if it happens, you wouldn't be buying any more guitars. We believe guitar manufacturers have a sort of duty to make and supply reliable guitars for beginners. Guitars at beginners' level are as important as high-end guitars for pro. This is where Smash comes in.
In regards to which is best I personally think you pretty much got it right! Folks can piss n moan all they want but the facts are facts. Gibson, Fender, PRS ect all make fantastic guitars, time-tested tools of the trade. Many of you feel the need to want to publicly put down a certain brand in favor of another, there's good n bad in all of them!! If I could afford a Gibson Les Paul I would get one! Sure I could pull out the plastic n get one but I don't wanna have to do that just yet. I have no shame in purchasing a cheap guitar as long as I like it, to me if a guitar has a good smooth fast neck ......... it's a good guitar!! You can always swap pups n hardware but the neck is a little more complicated. I have a Fender Squire Strat, it is an "E" series Squire, I think it was made from 1984-87, and I can tell you that I will be 50 years old in May of this year and the neck on this Squire is the best I have ever felt on any guitar I have owned!! and yes it was a fairly cheap guitar. Now I hear that the "E" series of Squire Strats are supposed to be highly sought after or something, I don't know all about that, all I know is that I love the way this guitar plays n feels in my hands n riding in front of my belly! So folks don't put a guitar down simply because you can't afford it, like I said they are good guitars for a reason, same goes for the cheap guitars, don't knock 'em 'til you try 'em, there are some mighty good players out there to be had for cheap $$$, bottom line ..... regardless of the name on the head ..... if you can afford it, if it feels n looks the way you like n has a good neck then buy it n give it the love it deserves, it'll love you back in ways you never imagined!! Happy pickin n God bless

If you want to splurge just a bit more and opt for an instrument with a little more stylistic range, the Ibanez Talman guitar vault accessory kit might be right up your alley. It includes a lovely seafoam green Ibanez TM302SFG, 12 high-quality Dunlop Tortex picks, a strap, a gig bag, a Kyser capo, a polishing cloth, and a tuner. This is off the beaten path a bit, but for some players, that’s going to be absolutely perfect.
Overdrive – A dynamic effect that sounds like your guitar tone is being played through an amp breaking up. Overdrives are more subtle than distortion effects. To achieve the original overdrive effect, a valve or vacuum tube amplifier would be “overdriven” by increasing the gain to the limits of the tubes. At this point, the vacuum tube can’t handle the voltage, starts “breaking up”, and adding extra overtones to the signal giving the sound distortion.
But in general, there's nothing wrong with Decca electric guitars, especially for indie musicians today who are looking for a vintage guitar with some character to it. Since most vintage guitar fans have seen every model that Gibson, Fender, et al, have ever made, many of the Japanese guitars of the '60s have a fresh look that stands out from the crowds. In 20 years, the M-i-J electric guitars of the '60s are going to be worth 4 or 5 times what they sell for now, and smart collectors who either can't afford Fenders, Gibsons and their ilk from that period, or who are interested in something more unusual, are already snapping them up.

Make sure to check out my other 100 guitars!!! shipping to the lower 48 states.I will not ship anywhere else,Make sure to check out my other 100 guitars at my ebay store "Axes Bold As Love Guitars". I have added a new part to my ending statement.I now recommend that all the guitars I sell be set up to your preferences. ALL GUITARS MAY REQUIRE SET UP!!! Players have such varied opinions that I no longer want to hear about it. Here is a very cool SX "Custom Shack Strat". The maple 21 fret neck is from a SX VTG Series and was removed from a brand new guitar.These are very nice necks. Zero fret wear . The very cool Gloss Sunburst body is an aftermarket Body made of very light and resonant Paulownia wood. It was new when I built this guitar,has no dings,or indentations,just light surface scratches.
The Ibanez JEM77WDP Steve Vai Signature guitar features a rosewood top on a mahogany body. The maple and walnut neck with a slim Wizard neck profile is topped with a 24-fret rosewood fingerboard with jumbo frets and Tree of Life vine inlays. This model also has a striking wooden pickguard and matching headstock, as well as wooden control knobs, earning it the nickname “Woody.”
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[mf] shop: amplifiers and effects: effects: multi effects pedals","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: effects","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[mf] shop: amplifiers and effects","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"multi effects pedals","prop5":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop6":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop3":"[mf] shop: amplifiers and effects: effects: multi effects pedals","prop4":"[mf] shop: amplifiers and effects: effects: multi effects pedals","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
Gibson offers a whole variety of models, but if you want to experience this brand, Gibson Les Paul Standard is a must. This is as old school as it gets from a brand new guitar. The finish on this one is Cherry Sunburst, which is as iconic as the model itself. With two PAF humbuckers, you get to experience the vintage tone that launched Gibson into stardom.
But having hot tubes is only half the recipe for getting great tone. Room sound is the other ingredient necessary for obtaining a full-bodied guitar track. It didn't take me long to figure out that the guitarists on my formative blues sessions were slyly contributing to my "education" by nudging the mics away from their amps as soon as I left the room. Thanks to their clandestine efforts, my ears opened up to an entire new world of electric-guitar sounds.
This is Yamaha’s C40II classical guitar, an inexpensive nylon-strung guitar that’s a cut above some of Yamaha’s even cheaper models designed for schools and the like. Many companies offer a line of low-priced, very basic designs tailored for education facilities. Don’t go that far down the price pecking order. The C40II for $140 USD on Amazon is a good compromise. Please do yourself a favor and get the $13.58 two-year protection plan!

The acoustic guitar lends itself to a variety of tasks and roles. Its portability and ease of use make it the ideal songwriter's tool. Its gentle harp-like arpeggios and rhythmic chordal strumming has always found favor in an ensemble. The acoustic guitar has a personal and intimate quality that is suited to small halls, churches and private spaces. For larger venues some form of amplification is required. An acoustic guitar can be amplified by placing a microphone in front of the sound hole or by installing a pickup. There are many entry-level acoustic guitar models that are manufactured to a high standard and these are entirely suitable as a first guitar for a beginner.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.
Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (Some sources, or maybe just one source quoted all over the net, states that they may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. There are several photos on the net showing David Bowie in his Ziggy Stardust days playing a red Hagstrom with Kent branding on the headstock.
 There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber

Consider so-called “vintage” or “’50s-style” wiring, in which the tone pot and cap are connected to the middle lug of the volume pot rather than the usual third lug. Given the sheer number of posts the topic has amassed on guitar-geek sites, you’d think it was an earth-shaking option. Yeah, it’s a cool mod that I happen to dig, but really, the sonic benefit is modest: just a bit less loss of brightness when you dial down the volume.

The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.
A great player knows a guitar is more than a few pieces of wood and metal.  Every Whalehazard guitar is handcrafted with incredible attention to detail and meets exacting standards of quality.  Each instrument is built in South Minneapolis by Andy Webber.  As a one-man operation, great care will be taken to make sure your custom guitar will take your playing and sound to a new level.  All materials and components are carefully selected for quality and longevity.  Designs are painstakingly contemplated and are constantly evolving.  From custom inlays to a hand-shaped bone nut, every detail of your instrument is studied and considered to make sure your Whalehazard guitar is a unique piece of craftsmanship that will stand the test of time.
While electric bass players have used regular guitar amplifiers in large concerts since the 1960s, this is usually just for the higher register; a bass amp is still typically used for the low register, because regular guitar amps are only designed to go down to about 80 Hz. One of the reasons bassists split their signal into a bass amp and an electric guitar amp is because this arrangement enables them to overdrive the higher-register sound from the electric guitar amp, while retaining the deep bass tone from the bass amp. Naturally-produced overdrive on bass obtained by cranking a tube amplifier or solid-state preamplifier typically results in a loss of bass tone, because when pushed into overdrive, a note goes to the upper octave second harmonic.
You might be wondering: “Why the glossy finish?” Having a gloss finish can mean the difference between your guitar cracking—or not--in extreme temperature changes.Of course, like all Cordobas, there is a truss rod with which you can change the string relief, so you’re not having to press the strings down so hard, making it easier for beginners to learn.
This full-size electric guitar from Davidson is all that you need to start playing master the very art of strumming. The quality, durability, comfort, and accessories that are required to get you started is included in this solid guitar package from Davidson. This is a full size (39 inches) and complete scale solid electric guitar made of maple wood. It is an electric guitar featuring a maple neck and gloss finish.
This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.
In Vietnam, electric guitars are often used as an instrument in cải lương music (traditional southern Vietnamese folk opera), sometimes as a substitute for certain traditional stringed instruments like the Đàn nguyệt (two-stringed lute) when they are not available. Electric guitars used in cải lương are played in finger vibrato (string bending), with no amplifiers or sound effects.
Controls available are extensive, but pretty straight forward and the quality of the entire package defies logic when you consider the price. In terms of budget reverbs, this one is among the best you can find at the moment. Behringer keeps pushing the line further and further by delivering quality and versatility to those who are limited financially.
Now, if you're just getting started and breaking strings every time you try to tune up because you hit the wrong octave, then start out with the cheapest strings.  Once you can reliably tune and play without destroying them, you can work you way up.  Once you have the hand coordination, your learning will be accelerated too.  The right tool for the right job, as Old Grandpappy always used to say.  The best electric guitar available will be garbage with the worst strings on the market.  Choose wisely!
i have a grand total of 1 pedal. it's an overdrive pedal that i only use when playing heavier songs. Other than that, i tend to play just guitar and amp. My amp has reverb and i tend to set that at about 1/3 the way round. Does that count as effects? My settings are set just on the edge of break up so i get a nice clean tone, but when i hit it harder, it gives a little crunch.
I have a shecter omen extreme 7 and found that the factor strings they put on were nice for my small fingers. I had to replace because the factor set in general needed some tweaking and they changed all the strings. Now i don't really like the strings they put on. Too small. All they had listed for the strings were 24X jumbo strings. What string set should i buy since i play Ambient, soft, but also djent metal.
Once you’ve gotten your needs squared away, you’re still going to need to pick an amp. And even if you’re certain as to what you want, it can still be difficult to choose. But that’s where we come in: we’ve rounded up the following 10 amps we believe are the top-tier options for beginner guitarists. So skip the hassles and heckles of guitar store salesmen and choose from one of these superb starter amps.
4-conductor humbuckers are fun to wire because they offer many combinations to play with. Some pickups have another bare wire which is there for shielding and should always be grounded. Manufacturers have their own color code, so make sure you find the right color code before connecting anything. Below is color code diagram for common pickup manufacturers.
Nice and great are just two of the many positive adjectives that people use to describe the Ibanez AEG12II-NT. And most of these satisfied users are pleased with its playability, describing it as a truly inspiring and fun instrument. Its visual appeal and sound quality are also commended often, some even coming from experienced players who compare it to more expensive acoustic-electric guitars.

Are YOU joking? only 3 real real ones? I’m gonna go ahead and assume your young and don’t have much musical exploring under your belt yet. Clapton, Hendrix, King…. 3 very good choices but also pretty narrow minded buddy. Jimmy Page? Django Reinhardt, David Gilmour, Steve Gaines, LES PAUL, Chet Atkins, Gary Morse, John Petrucci, Yngwei Malmsteen, the dudes from Dragon Force!, Rory Gallagher, Stevie Ray Vaughn for god sake!, Robert Johnson, Joe Bonamassa, Buddy Guy, Van Halen, Joe Satriani, Kirk Hammett, Dimebag Darrell, Jeff “skunk” Baxter, Jerry Reed, Andre Segovia, and YES John Mayer can really play!, I could go on and on……. ONLY 3 REAL ONES? WTF? Broaden your horizons my friend. only 3 real ones…. face palm…… failboat.
Roger McGuinn worked with C. F. Martin & Company to develop a seven-string folk guitar. McGuinn’s guitar (the D7) is tuned the same as a standard folk guitar with steel strings, but the third (G) string is augmented with a harmonic string one octave higher. The intention was to offer the six-string player the chance to play “jangly” twelve-string style lead guitar.

Additionally, the instrument gets a good once-over for all other miscellaneous needs. Every Calibration & Reset is tailored to the individual player and there are never any charges for adjustment once the service is initially completed. Every Calibration & Reset is guaranteed for 60 days from completion (though typically adjustments are made well past the 60 day mark for free). No Calibration & Reset is done until you're completely happy with the way your guitar plays. The only limitations are the laws of physics, which despite our many attempts, we have yet to find ways to break.

To capture two speakers in a multi-speaker cab or record a bigger sound that delivers the response of two different microphones in similar positions on one speaker, you can try using two mics in a close or semi-close placement. If you’re using two different mics on a single speaker, place the capsules of each as close together as possible, without touching, in order to minimize phase cancellation. This technique might seem redundant, but can often yield outstanding results, allowing you to blend the characteristics of two different microphones to capture one amp sound – a bright, detailed condenser and a punchy, midrange-heavy dynamic, for example. On guitar cabs carrying two or more speakers, try miking each speaker separately, placing each of two mics – same type or different – at the same distance. Some amp makers use different types of speakers in cabs to enhance sonic complexity, and this miking technique will make the most of those. Even two speakers of exactly the same type, however, will often sound slightly different, and blending them might yield great results.

If you had to write a soundtrack for the 20th century, electric guitars would almost certainly be playing the tune. No other instrument defines the angry rebelliousness of the modern age quite like it. Who could forget Chuck Berry, Jimi Hendrix, the Rolling Stones, or Nirvana—some of the greatest exponents of guitar-driven rock? But if you think playing an electric guitar is all about attitude and dexterity, think again: it's actually about the science of electromagnetism. Let's take a closer look a how these amazing instruments turn electricity into sound.
• For the fifth insert (leave the fourth empty), go to Distortion/AmpSimulator and click on the plug‑in's edit button. For the Amplifier Model, select Crunch, and try the following parameter values: Drive at 8.7, Bass, Middle, and Treble all at 5.0, Presence at 6.2, and Volume set to 5.0. For the Cabinet, select Cabinet 2, with Lo Damping at 38 and Hi Damping at 35.
Looking at the front (or top rather) panel of the Boss ME-80 is where it gets interesting. Don’t let the sheer number of knobs intimidate you. Shaping your tone with the ME-80 is a very tactile experience, just like you would if you had a pedalboard full of pedals. The ME-80 is made for the guitarist that doesn’t necessarily want to lug around (or spend money on) a large pedal collection, but still loves the feeling of turning knobs and instantly hearing results. The interface is actually pretty easy to understand. Every major section is surrounded by a white border, and to design a sound (a.k.a. patch) you just move through the sections and set the effects to your heart’s content. We should mention that the Boss ME-80 has 59 different effects and nine guitar preamps which you can use. The first section labeled PREAMP is where you set your amplifier model, and should feel familiar if you’ve ever messed with a guitar amp. Next you have an EQ section, REVERB, COMP, OD/DS, MOD, and DELAY. You can look at the front panel for yourself in a closeup photo to see the various effects available within each of these groupings. The 8 black footswitches along the bottom are what you use to switch effects on and off, as well as move through banks and presets. They’re not your traditional stompbox footswitch, but they feel pretty nice. As is the norm with the larger multi-effects floor units, the ME-80 incorporates an expression pedal, which is assignable to different effects via the knob next to it. Very easy to use, very intuitive.
When making solder joints to switches and pots, the lug and wire should be heated by the tip of the iron and the solder pressed (or flowed) onto the joint. In this manner you can avoid cold solder joints as both components are properly heated prior to the application of solder. Melting solder on the tip of the iron does not insure the actual components are being heated properly.
Confusion sometimes revolves around the distinctions between overdrives, distortions and fuzzes, but in theory each should do approximately what it says on the box—even if some also do a little of the other breeds’ jobs along the way. In the case of overdrive pedals, the intention is often twofold: either to provide a gain boost to “overdrive” a tube amp into distortion, or to approximate the mildly distorted sound of a slightly overdriven tube amp. In practice, most do a little of both. Crank the average overdrive toward the max and it usually coughs up an element of self-generated distortion, which can easily be heard when DI’d into a mixing desk set to well below overload levels; generate enough distortion, and things can also sound a little fuzzy. Despite the gray areas, however, there are definitely distinctions between the types. It all makes some sense if you think in terms of the degree of clipping achieved by the pedal, with overdrives generally being soft-clipping devices and distortions being hard-clipping devices.
The Dolce is a cedar-top, with mahogany back and sides, and the usual set of Savarez Cristal Corum high-tension strings. At 9 lbs and 38” this is a slightly shorter and lighter-weight guitar, which will be more appropriate for a smaller person. This guitar does not come with a gig bag or other accessories, so if you choose this guitar, prepare to make a list of what your instructor of choice says you need.
i just started using this book never having played before and am finding it totally easy to follow. the friendly narrative guides the reader through every step, explaining the most simple of terms and concepts clearly and concisely. and yes, the CD is funky and you can play along with it more or less straight away AND sound good, which keeps you motivated.

{"id": "451058", "categoryId":"site5LIAA", "name":"Electric, Acoustic and Bass Guitar Stand", "pageUrl":"/Musicians-Gear/Electric-Acoustic-and-Bass-Guitar-Stand.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"1", "message":"", "value":"9.99", "priceMin":"9.99", "priceMax":"9.99", "msrp":"24.99", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"10927", "brand":"Musician's Gear", "reviewStarImageUrl": "", "reviewStarRating":"4.5", "reviewStarRatingInteger":"9", "reviewHowManyReviews":"360", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5ODD,site5YGH,site5LQ", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"12742902520", "priceVisibility": "1", "itemType": "New"}

• Sound Judgment: Consider the sonic characteristics of the various materials used in making electric strings. Stainless steel strings are the least glamorous, but offer plenty of bright bite and sustain. Pure nickel has a warm old-school sound, for vintage tones. And nickel-plated steel is a bit brighter than classic nickel and responds more adroitly to picking attack. Chrome guitar strings are typically the province of jazz players or blues artists who are looking for the kind of warm retro tones chiseled into history by the likes of Charlie Christian or swinging Gibson ES-250, ES-5 and ES-335 bluesman Aaron “T-Bone” Walker. And then there are coated strings – the most expensive and theoretically the longest lasting. They are, however, not really the best, sonically speaking. Coated strings tend to have less sustain. Also, their Teflon exterior surfaces are slippery, which might take some getting used to for particularly aggressive electric guitar players. And when the coatings wear off, they rust like any other string.
Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, in part because of its strength, and in part because the material can highlight and amplify the wood in the body. Maple is also often used as a top for the guitar body, partly because it is beautiful (think flame, or quilted maple tops), and partly because it can brighten a sound that would otherwise be murky.

The Boss GT-1000 Guitar Effects Processor is by far the best multi-effects pedal that the team at Boss have ever come up with. This is jam-packed with the entire back catalogue of Boss stomp box effects as well as tones from the coveted "500" series Delay, Modulation and Reverb multi FX pedals. So, you have over 116 types of effects to create music with – making it a no-brainer for Boss fans in general and those who need a huge array of expertly crafted FX.

Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
The core metal used for strings is an important variable to consider.  Not only does the string core affect tone, but it affects the tension strength as well.  The heavier the string gauge, the stronger the core metal needed.  You don’t want premature string breakage, especially during a gig.  Your options absolutely depend on the tone you desire, but they also depend on the string gauge you prefer for the genre of music you play.

got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.
{ "thumbImageID": "GRX20-Electric-Guitar-Black-Night/519417000787000", "defaultDisplayName": "Ibanez GRX20 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Night", "sku": "sku:site51275776901849", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Black-Night-1275776901849.gc", "skuImageId": "GRX20-Electric-Guitar-Black-Night/519417000787000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51275776902065", "price": "149.99", "regularPrice": "149.99", "msrpPrice": "214.27", "priceVisibility": "1", "skuUrl": "/Ibanez/GRX20-Electric-Guitar-Jewel-Blue-1275776902065.gc", "skuImageId": "GRX20-Electric-Guitar-Jewel-Blue/519417000085000", "brandName": "Ibanez", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Gilmour was made famous by his haunting guitar scores in Pink Floyd. This “replacement” guitarist surpassed expectations and helped shape Pink Floyd’s unique sound. You can always expect hairs at the back of your neck to stand whenever you hear one of his solos – be it for the first or hundredth time you’re listening to it. All the emotion that Gilmour’s poured into his guitar work lives on in the music and is channeled through anyone who’s ever wanted to cover a Pink Floyd song. I know several guitar players (myself included) who whenever playing the Comfortably Numb solo – whether they are alone in their bedrooms or on stage – have always been unwillingly brought to tears, near the point of crying. How could you not expect things to get esoteric and mystical when it comes to music?
{ "thumbImageID": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "defaultDisplayName": "Fender Standard Telecaster Left Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst Gloss Maple Fretboard", "sku": "sku:site51310681125015", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard-1310681125015.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Gloss-Maple-Fretboard/H76503000004001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black Gloss Maple Fretboard", "sku": "sku:site51310681125013", "price": "499.99", "regularPrice": "599.99", "msrpPrice": "500.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard-1310681125013.gc", "skuImageId": "Standard-Telecaster-Left-Handed-Electric-Guitar-Black-Gloss-Maple-Fretboard/H76503000002001", "brandName": "Fender", "stickerDisplayText": "Price Drop", "stickerClass": "stickerEmphasis", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
This is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal as opposed to using transistors. A vast majority of vintage guitar amplifiers use tubes, which help to give them a warmer, sweeter tone. They are available in combo amps and in amp heads, which then require an external speaker cabinet to produce sound.
The most common alloy (mixture of metals) used in pickups is alnico; this is a combination of aluminium, nickel, and cobalt. Alnico magnets were once the strongest known, but they have since been eclipsed by the rise of the rare earth magnets, which can also be used in pickups. Samarium cobalt magnets and neodymium boron iron magnets can also be used, although are perhaps less common. Additionally, ceramic magnets, based on iron oxide with strontium or barium carbonate, can be utilised.
In the Seventies, Clapton’s work with Derek and the Dominos and his first solo albums added a slew of masterpieces like “Layla” and “Lay Down Sally” to classic rock’s repertoire. The Eighties also saw Clapton’s music featured in movies (The Hit in 1984 and Lethal Weapon in 1987) and commercials (“After Midnight” for Michelob in 1987), while a string of albums produced by Phil Collins established Clapton as a pop/rock icon.
This is a great opportunity to start working with a digital multimeter (DMM). Track down an inexpensive DMM and make sure it has a continuity function, preferably with an audible connection indicator. You can then trace how switches work by connecting the individual lugs to your DMM and seeing which are connected, and then switching to the other position and taking the same measurement again. The beep that sounds when you’ve made a connection is a great help when you’re taking these measurements.

Yamaha continues to rank highly in the entry to mid-tier guitar market, thanks to their student friendly instruments. I for one took classical guitar lessons with a Yamaha classical that still plays and sound great up to this day. As expected, they have an entry in this affordable price range category, in the form of the 3/4 size JR1, which is essentially a smaller version of Yamaha's popular FG acoustic guitar.
Like any other electronic products, the amp as well has already gone into notable changes and updates over the years. However even the changes in amp technology happened, many still prefer a tube powered amplifier over a solid state and modeling amps. This is mainly because the sound of a valve is considered the organic or natural on how an amplifier should sound. While the other two is engineered to sound like a tube amp especially the modeling amps.
A partial PA is harder to define, but it's essentially any PA system that doesn't have the capacity to mic your whole band. More often than not, in these situations, mics end up on the kick drum and snare drum for the reasons outlined above. In this case, it does help to have a little extra juice in your amplifier, but try to keep it tamed, nonetheless.
You can tell these lists only consist of people who don't dig deep on info of great guitars. Breedlove's USA lines are top shelf. They quality and tone is outstanding and they are a top 5 or 6 company. I have an Oregon Parlor that is quite possibly the best sounding Parlor size guitar I've ever played or heard. And that's a plain Jane American made acoustic. They offer higher end American made stuff. I've played their other body styles and they aren't copying anyone's sound or style. They sound like Breedlove and that's something special. Much like Taylor's have their own sound so do Breedlove.
B.C. Rich specializes in guitars for the heavy metal and hard rock crowd. They’ve produced some of the most legendary designs in the history of metal, including the Warlock, Bich, Virgin, and Mockingbird. Their instruments helped to mold the hard rock and thrash revolution of the 1980s and B.C. Rich is still a great choice for any guitarist looking for an instrument that looks and sounds as edgy as possible.
Like most affordable super strat guitars, the Omen-6 has a basswood body, carved into the elegant looking shape that Schecter is known for. The neck is crafted from mahogany and joins the body via a bolt-on joint. It is topped by a 14" radius rosewood fingerboard that has 24 jumbo frets. It comes setup for fast and comfortable playability, with its 25.5" scale length, 1.65" nut width and stylized fretboard markers. Giving this guitar its voice are two Schecter Diamond Plus pickups, which are passive pickups but are still hot enough for driving high-gain pedals and amps.
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
Alternatively – and often most effectively – you can fix phase issues in the digital realm. Record your two-mic signal on two separate tracks, then zoom in on the sound waves in each of the two channels in your DAW’s editing window until they are huge and you’re seeing the full up-and-down crests and troughs of the waves. Now, drag or nudge the sound wave of the ambient mic forward (i.e., to the left of the screen) a few milliseconds at a time until the sound waves line up perfectly. Listen again, and you should hear a very different blend that is fuller, richer, and more “together.”

Go ahead – visit a music store and spend a few minutes on different guitars. If you see the same models listed here, that’s great. If not, then look for a model that has roughly the same size and shape as the one you’re eyeing. If you’re keen on buying an acoustic guitar online, take note of the model or size that feels the most natural to you, then go for that.
Tempo Delay: Most plug-in and hardware delays now allow you to automatically sync delay times to MIDI clock and then specify the interval of the repeats in terms of note values rather than milliseconds. A trick here is to use two simultaneous tempo-based delays with, say, a triplet delay setting, panned hard left, and a straight-note delay panned hard right. Things can get more interesting still if you apply this technique using ping-pong delays, so that alternate repeats bounce from one side of the stereo spectrum to the other. To create a true 3D effect, play around with the amount of original signal left in the middle. Depending on the intervals between your repeats, you can turn simple guitar and synth lines into complex, arpeggiator-like patterns or totally spaced out ambient pieces. Stephen Bennett
The Effect:Distortion is one of the most popular and desired guitar pedal effects, especially among rock, hard-rock and metal players, The Kinks, Jimmy Hendrix, Metallica, to name a few. Prior to the introduction of effect pedals on the market, Distortion was mostly achieved by forcing an overwhelming amount of electricity passing through a guitar amp’s valves. Nowadays this is no longer necessary. Arguably one of the most famous and newbie friendly option and at the same time prime example for a distortion pedal is the classic Electro-Harmonix SOULFOOD.
There exist libraries that can do astoundingly realistic guitars, but they're expensive. There are a few guitarists hanging around the AF, I suggest you hook up with one of them. Even if you do buy a library, if you don't play the guitar there's a decent chance you won't be able to write for them well. No one wants clunky, awkward guitars! Team up with a fellow musician and have some fun.
{"pageName":"[gc] vintage: kay","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst
Let’s kick things off in style. This guitar is one of Epiphone’s mid range semi-hollow models. As such, it has to meet much more refined standards. Many wondered if Epiphone was capable of delivering such a guitar, but the answer is a strong yes. With its three Dogear Alnico pups, this thing is a beast. If you know how to handle a semi-hollow, you will find that Epiphone Riviera Custom P93 brings a lot of range. At least that’s the type of impression it left on me.

Fishman is the main brand that you’ll see manufacturing the electrics, but lots of the bigger guitar brands will also have their own in house products. Higher end guitars are more likely to have specialist or boutique equipment which is generally considered to be better. Gibson using LR Baggs pickups systems is one such example. You can also opt for aftermarket pickups.

If you’re a guitar lover, you might be out for a unique look as well as your own sound. You might also be interested to learn more about how guitars are put together and function. If you have moderate woodworking skills, you can build your own solid-body electric guitar. To make things easier, you can even purchase some parts pre-made. Use your creativity for the finishing touches, and you’ll have a unique guitar and a story to tell.
Between 1974 and 1984, production of Gibson guitars was shifted from Kalamazoo to Nashville, Tennessee. The Kalamazoo plant kept going for a few years as a custom-instrument shop, but was closed in 1984; several Gibson employees led by plant manager Jim Duerloo established Heritage Guitars in the old factory, building versions of classic Gibson designs.

Tone wise, flamenco players appreciate the snappy and bright tone that this guitar reproduces, while acoustic guitarists find the playability and feel to be easy to transition to. Whether you want to focus on classical flamenco style, or you are merely looking to the sound of nylon string guitars into your collection, the GK Studio will not disappoint. The combination of its solid European spruce top and Cypress back and sides is a treat to look at and great to listen to. You can visit Cordoba Guitars for the complete specifications. You can also see two more Cordobas in our nylon string guitar roundup.
My brother owns a Norma acoustic guitar modeled on the Gibson Hummingbird. He bought it used in the mid 70s. Solidly built but only average sound. I would guess that like many Japanese made guitars from the 70s, Norma was not a "company," but simply an American sounding brand name chosen by a larger Japanese instrument manufacturer to market their guitars in the USA. I own a mid 70s Penco acoustic, same deal, name was used on Japanese made guitars marketed through the Pennsylvania Music Company, thus Penco.
Imagine a rich, authentic acoustic guitar tone coming from your electric guitar - at the flick of the switch!  Replace your current saddles with Graph Tech's ghost modular pickups and one of our Acousti-Phonic preamp and you'll have instant access to true, acoustic tone from your electric guitar or bass, without altering your electric pickups.  With the ghost Acousti-Phonic system you can play one guitar!  It can be electric AND acoustic, separately, or blended together for an infinite range of new and exciting sounds.

| Tags: 1940's fidelity amplifier, 7F7, amp, amps, chickenhead knobs, EL86, fender clone, fender tweed champ, fidelity amp, fidelity amps, gibson skylark, gibson skylark amp, guitar amp, Guitar Amp History, guitar amps, practice amp, practice amps, silverface champ, silvertone, tone, tweed champ clone, valco, vintage amp, Vintage Amps, vintage guitar amp, vintage guitar amps
The Gallien-Krueger 800RB was a solid state bass amplifier head introduced in 1983 that was liked by bassists for its loud, clean sound and durable construction. It introduced the concept of bi-amplification, as it sent 300 watts of low register sound to the bass speakers and 100 watts to the tweeter.[6] The GK used a tube preamp simulator circuit called "boost". GK 800RB users include Red Hot Chili Peppers bassist Flea and Guns and Roses' Duff McKagan.[6]
Dissatisfaction with vintage units of this type usually centers around their limited gain, and their inability to sound truly fierce with Drive cranked up to full. The more exemplary users of this type of pedal, however—such as Stevie Ray Vaughan or Eric Johnson, who were both masters of early Tube Screamers—usually kept the Drive control in the lower part of its range, where the sound remains more natural and, yet again, serves as an excellent pre-boost to drive a good tube amp into distortion when the Level control is set high enough. Some players also find older pedals built to this design to have a distinct midrange hump, a slightly wooly tonality, and/or a lack of low end (as ever, depending upon the ears of the player you talk to). Consequently, a lot of newer makers have accounted for these in their redesigns. Visual Sound’s Route 66 pedal has a Bass Boost switch, Ibanez’s own recent-era TS9DX Turbo Tube Screamer has a Mode control that takes you from classic sounds to settings with more distortion and more low end, and plenty of other makers address both in their variations on the circuit.

when I started playing, if you wanted distortion, you "cranked up" the volume on the guitar and the amp. my old Gibson amp had reverb and tremolo. I used to play without reverb or tremolo. nowadays, in my old age, I use a little reverb for flavoring. I have pedals, but it's too much hassle to set everything up. so, I just plug into the amp with a little reverb. I'm happy and that's all that really counts. isn't it ?

When I first tried multisourcing, on a solo project by Club Foot Orchestra guitarist Steve Kirk, I used an air mic, a direct source (Manley tube DI box or speaker emulator output from Kirk's Marshall JMP-1 tube preamp), a close mic on a clean-sounding Fender Princeton amp, and close and distant mics on a cranked-up Marshall cabinet (see Fig. 2). And that was just for the first rhythm track! As you may imagine, mixing was a lot of fun, and after that day there's been no going back to the old SM57 shoved up against the grille cloth. If you dare, you can take it from there. The only limitations are your time, the guitarist's patience, and available tracks. Oh yes-and lots and lots of mics.
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
And when you shop with Guitar Center, you can search through our entire chainwide inventory and have any item shipped to your local store for free, or directly to your home. Whether you’re a devoted collector, a player looking to get back that one instrument that got away, or an audiophile trying to capture the true vintage sound you’ve always wanted, the Guitar Center Vintage Collection has everything you need. Start searching today.
And that’s exactly what reverb effects are trying to emulate: the way a single instrument sounds different in different spaces and reflecting off of different materials. Many common environments that reverb units try to emulate are halls, churches, and chambers. There are some pretty unique reverbs like a particle reverb that adds special effects to make things sound more spacey, and there’s even one that attempts to emulate what we imagine a black hole to sound like.
The Martin DSR2 also comes equipped with built-in Fishman Sonitone electronics, which features discrete soundhole mounted controls, allowing for stage-ready performance without having to drill excessive holes on the side of the body. With its continuesly high rating and incredible value for money, the Martin DSR2 should be at the top of your list when you're looking for an acoustic-electric guitar in this price range.

Here’s the thing about acoustic guitars: those that use solid wood command a higher price than those that use laminates for their soundboard. Acoustic guitars that have a solid top are more sturdy and sound better as the wood matures. This is why solid wood models are usually more expensive, and also why they come highly recommended if you want to make a really good investment.
Fender Super Champ X2 is a hybrid. Combining the organic sought after qualities of a valve driven amp and the dynamic technology of a modeling amp. This 15 watts combo amp with 1×10” inch speaker has two channels. Channel 1 is pure volume for the clean that starts to bite in every turn of the volume knob and modelling section that has a separate volume, gain and voicing control with 16 presets that includes the blackface, silverface, tweed, British combos and many more. The final section on the panel is shared by both channels, the EQ bass and treble, FX adjust, and FX select consisting of a delay, reverb, chorus, tremolo and vibratone.

700-Series, which are all solid-bodies are probably worth $250-$350, maybe a little more for the 4-pickup 742 model. I’m pretty sure that they were on the market at the same time as the 800s but not as many are being seen. Since the 800s were a step-up in quality compared to previous Kents and the 700s used similar design features, they should be pretty decent instruments. Although collectors haven't shown a lot of interest in them, rarity has to be considered an influence on the price at this point.Recently a 742 sold on Ebay for over $1000 and a 740 recently sold for $999. Previously most of the 700s had been selling for $200-400.
The following effects are a step up from your basic overdrive, distortion and fuzz, with more specialized sounds. In this category, you’ll find pedals that include effects such as time delays or frequency modifications – things that go beyond changing the shape of a sound by also changing the pitch, rhythm or both. Others are simpler, but still offer enough tone-altering potential to set them apart from the basic pedals.
Reverb is one of the earliest effects for guitar players, originally built into the amp itself like the Fender Deluxe Reverb and Super Reverb. Traditional spring reverbs actually send the guitar signal into the springs causing them to vibrate and simulating reverb. With the advent of digital technology reverb units pedals made their way onto the market but mostly as rack units, but as technology improved and shrank many of those units can fit into a pedal now.

The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.
The SimulAnalog Guitar Suite is an old but still popular free guitar effects program. It contains a set of VST plugins that emulate some of the most common used guitar effects and amps. It has simulations of five essential guitar effects which include Boss DS-1, Boss SD-1, Tube Screamer, Oberheim PS-1 and Univox Univibe. The SimulAnalog Guitar Suite was born out of an academic research and thus applies a zero deception, no marketing hype approach. The interface is very basic but the sound is said to obtain lass than -40dB of difference compared to the original hardware.
The neck contains a metal truss rod that prevents it from bowing and twisting due to string tension and environmental factors. Adjusting the truss rod corrects intonation issues that prevent the instrument from being tuned properly. This truss rod can be adjusted either at the headstock, or just inside the body of the guitar, at the base of the neck.
Players and rock historians alike will talk endlessly about who either created or discovered or recorded the first distorted guitar tone. They argue, pontificate, debate, and even break it down into categories of type and of geographical location. “So, do we mean distortion, overdrive, or fuzz tone?” or “Do you distinguish between North American and European ‘firsts’?” Dave Davies of the Kinks is often credited with the first appearance of a heavily distorted electric guitar sound in the British charts for ‘You Really Got Me’ in August 1964.

Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Diamond - # of Strings: 6 - 12 - Scale Length: 25.5" (65cm) - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Custom - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Natural, Brown

Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.
Masacre takes a great deal of my time, but in normal days I am also a guitar teacher in my hometown, Medellin. I counsel young rock bands as well, with the purpose of sharing my knowledge and experience with those who start in this road. I've been part of the selecting jury at several local rock festivals and when I am available and things work out, I join some of my friends and put together tribute bands to play at local clubs, paying homage to those bands that inspired us since childhood, such as Black Sabbath, Kiss, Ozzy Osbourne, Dio, and others.
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.
Consider the MusicMan SR5 20th Anniversary basses, with a "mahogany tone block" channeled into an ash body, running from the neck, through the pickups, to the bridge. I've played several of these basses, and the best two of them were really outstanding (I own one of those). Could be any number of reasons they sound as good as they do, but there you have it.

Gibson guitars are usually equipped with dual-coil pickups. They have a higher output level than single-coil pickups and produce a fatter sound, which is usually an advantage for distortion, but not only! Gibson has many other successful models, like the Explorer (The Edge), the Flying V (Jimi Hendrix) or the ES-335 (B.B. King). Epiphone, founded in 1915, was bought by Gibson in 1957 and became Gibson's sub-brand, even if a few custom designs of the 1960's are still mythical (Casino).

The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333

How does it sound, you ask? Guitarists generally agree that Line 6 tones are as good, if not better, than any digital sound out there from the likes of Boss and DigiTech. One really cool and intuitive thing is that the small display screen has a color-coded background depending on what type of effect you’re on. It’s a little thing, but such smart thinking from Line 6. Delays are green, Modulations are blue, Distortions are yellow, Filters are purple, and Reverbs are orange. Modulations and delays sound fantastic, and will stack up against a Line 6 DL4 or Boss DD-X box any day. Compressors, overdrives, fuzz, and distortions are usable but less than stellar, which unfortunately is the norm for digital effects. We actually tried using the Line 6 M5 with a solid-state amp, and the dirt effects sound much better going into that than they do into a tube amp (your milage may vary). Remember, this is not meant to replace your entire board. Over time, if distortion is your thing, you can get a dedicated analog distortion stompbox and keep the M5 for the other dozens of effects it does really well. For effects like volume and wah, you’ll be glad to know the M5 has an input for an expression pedal, which you’ll want to invest in if you care to use those types of effects (check out the EX-1 here if you care to stick with Line 6). If you don’t feel like editing patches and want to jump right in, you get plenty of presets to scroll through (the two footswitches let you scroll up and down between patches). Some presets are a little outrageous, but with a little editing you can reel them in and make them more usable. And speaking of scrolling up and down through presets, at first we were disappointed that we had to scroll through all 100+ patches to find the ones we like. Turns out you can make a favorites list of up to 12, and scroll only through those. Again, we’re continually impressed by the little things on the M5.

Which got me to thinking about the history of American guitar companies. Many famous brands of guitars which started production here in the USA now exist as a name being used by an unrelated company for importing guitars into this country. Other brands are still being made but ownership has passed to one of a few big guitar companies. It’s difficult to trace this history without a “score card”.
I consider Squier and Epiphone to be the two top brands beginners should be looking at for their first guitar. However, there are some key differences when it comes to their flagship instrumets. Where the Epiphones listed above have a pair of humbucking pickups, the Squier Stratocaster has a trio of single coils, and the Telecaster a pair of single coils.
Now that we covered the basic features, let’s talk about what really counts: the built-in effects, amp models, and usability. For better or for worse, people tend to compare multi-effects units with the experience and sound you get from owning a pedalboard full of individual pedals. Well, great news: the consensus is that the Zoom G3X feels a lot like using individual stompboxes; more so than any other multi-effects unit on the market. Zoom really nailed it when it comes to making an intuitive interface. If you look at the layout, you’ll notice 3 “stompbox-style” sections side by side, each with a little display and on/off footswitch. These are meant to feel like 3 guitar pedals next to each other. They’re technically 3 slots which can each hold an effect or an amp model. The Zoom has 6 slots total (you can scroll left and right to access them), and all 6 can be used at once. You’ve got LOTS of choices to shape your tone: 94 effects and 22 amp and cabinet models. Any type of effect you can dream up, the Zoom G3X has you covered. Tremolo, vibrato, compressors, filters, overdrives are all available, and many of the effects simulate popular pedals like the Tube Screamer, EHX Big Muff, Pro Co RAT, Boss DS-1, and the list goes on and on. Same goes for the amp modeling - you can emulate a Marshall, Fender, Orange, Vox, etc. and pair up different amp models with various cabinet models. You can make your effect chain in whatever order you want, which is great for the beginner who is figuring out pedal order for the first time, and the veteran who wants to experiment with unique pedal combos. From a user review:

As of 2006, many makers, including Gibson, were manufacturing resonator guitars to the original inverted-cone design. Gibson also manufactures biscuit-style resonator guitars, but reserves the Dobro name for its inverted-cone models. These “biscuit” guitars are often used for blues and are played vertically instead of horizontally like a “spider” bridge.
Until the 1950s, the acoustic, nylon-stringed classical guitar was the only type of guitar favored by classical, or art music composers. In the 1950s a few contemporary classical composers began to use the electric guitar in their compositions. Examples of such works include Luciano Berio's Nones (1954) Karlheinz Stockhausen's Gruppen (1955–57); Donald Erb's String Trio (1966), Morton Feldman's The Possibility of a New Work for Electric Guitar (1966); George Crumb's Songs, Drones, and Refrains of Death (1968); Hans Werner Henze's Versuch über Schweine (1968); Francis Thorne's Sonar Plexus (1968) and Liebesrock (1968–69), Michael Tippett's The Knot Garden (1965–70); Leonard Bernstein's MASS (1971) and Slava! (1977); Louis Andriessen's De Staat (1972–76); Helmut Lachenmann's Fassade, für grosses Orchester (1973, rev. 1987), Valery Gavrilin Anyuta (1982), Steve Reich's Electric Counterpoint (1987), Arvo Pärt's Miserere (1989/92), György Kurtág's Grabstein für Stephan (1989), and countless works composed for the quintet of Ástor Piazzolla. Alfred Schnittke also used electric guitar in several works, like the "Requiem", "Concerto Grosso N°2" and "Symphony N°1".