The Mustang bass debuted in 1966 as (along with the Coronado) Fender's first shortscale bass, however the Competition finishes were not seen until 1969. It was effectively the same instrument, with sports stripes, and initially a matching coloured headstock. The competition colours were Red, Orange and Blue (although blue was officially called Burgundy). Have a closer look at this 1969 Fender and check out the soundclips through various vintage amplifiers.

The AS is a semi-acoustic guitar built to tackle just about any genre of music you throw at it. The pickups are mounted into a sustain block for increased sustain and feedback elimination. The 17th fret joint features comfortable access to higher notes. Super 58 Custom Pickups The Super 58 Custom pickups deliver the smooth, nuanced tones and the biting growl of blues. Ebony Fret board w/ Art star Fret Edge Treatment The Ebony fret board with Art star fret edge treatment provides tight response and smooth left-hand fingering. Bone Nut The Bone nut provides richer tone from low to high. Specifications: neck type: Art star 3pc Mahogany/Maple set-in neck body: Flamed Maple top/back/sides fret board: Bound Ebony fret board w/Pearl & Abalone block inlay frets: Medium frets w/Art star fret edge treatment bridge: ART-1 bridge tailpiece: Quick Change III tailpiece neck pu: Super 58 custom (H) neck pu bridge pu: Super 58 custom (H) bridge pu Neck Dimensions: Scale: 628mm/24.7" a: Width at Nut - 43mm b: Width at Last Fret - 57mm c: Thickness at 1st - 20mm d: Thickness at 12th - 22mm Radius 305mmR Body Dimensions: a: Length - 19 1/4" b: Width - 15 3/4" c: Depth - 2 5/8".
The sets, as mentioned above, are paired with Vox's BC108, which is a compact, portable, semi open-back cabinet that is front loaded with a single "8” VOX Original 8 Ohm Speaker" rated at 25W input (Dimensions W x D x H: 260 x 200 x 285 mm/10.24" x 7.87" x 11.2"). The BC108 also comes with two 1/4" jacks, wired in parallel, for adding another cabinet. Vox has also suggested the compact BC112, a semi-open back, oval port cabinet containing a single 70W, 12" Celestion G12 V-type speaker, to pair with the MV50.
To create a thicker rhythm guitar sound, overdub the same part one or more times. Depending on the desired effect, the overdub can be treated as one mono signal and mixed to the same stereo position, or panned left and right for a stereo double-tracked sound. Alternatively, treat the original track with an ADT (Artificial Double Tracking) effect. This can be done with a digital delay set to around 40 milliseconds. Again, the delayed signal can be panned or mixed as one with the original guitar track.
Many players use more than one effect – in this case, they place them next to each other on the floor, joining the output of one pedal to the input of the next using a small guitar lead called a “patch lead”. This allows them to use more than one effect at a time and toggle and combine them as they wish. Most players with multiple effects pedals attach them to a board, imaginatively called a… “pedal board”. This makes the pedals easier to transport and carry around. They set up and plug together all the pedals on the board, so when the user gets to a gig they can just plug in and play without having to set everything up again.
{"product":{"id":"K47863","stock":"","price":"399.99","name":"California Redondo Player Acoustic-Electric Guitar","download":false,"sku_id":"","checksum":"368856727023","rep_id":"site51500000000140752","displayId":"1500000000140752","sku_rep_id":"","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
“Most guitarists learn from records,” says Dr. Andre Millard, a professor at the University of Alabama-Birmingham, editor of The Electric Guitar: A History of an American Icon. “That’s how you learn to play. We learn from the classic records. And those classic records have that classic tone, which is ’58 to ’63.” And quite frequently, Millard points out, the studio had as much an impact on those recordings as anything else. He uses the Rolling Stone’s debut, England’s Newest Hit Makers which was released on London Records in 1964, as an example.

Players who want to emphasize low volume and portability — especially the ability to discreetly pack their amp — will want to look for as small a unit as possible. Some of these can still create a decent sound, but you’ll find that their natural overdrive is going to sound considerably compressed, and there won’t be much dynamism in response to your picking or strumming pattern.

I’ve been searching for my dream guitar forever and I finally found it in the Yamaha APX600 (best starter electric acoustic by the way). Found this package and was honestly nervous that it was good quality for such a good price, but it is the best thing I could’ve done! Guitar can in perfect condition and hard case is sturdy and locks well, it is an INCREDIBLE deal for this quality of a case. Extras are a nice addition, but not crazy necessary. But honestly, with a price like this, they almost feel free. Great customer service also. Don’t pass this deal up! Couldn’t find it anywhere else.

It is famed as the producer of some of the intriguing piece of guitar around like arch top ones, the SG series, Flying V, ES175, Firebird and more. In fact, the ES 175 was the first popular electric guitar around the world at the time. Another peculiar offering under them is the Les Paul Melody Maker, which has been the go-to option for many around the globe.
Solid state systems grew in popularity in the 80s and 90s, as the digitization of audio signals posed a more reliable and less expensive alternative to tube amplification. In recent years, however, many guitarists have been willing to fork over a little extra scratch to get their hands and their ears on the sounds of the past, on the warm tones that the computers can't seem to capture.
Late 1938: Scalloped "X" bracing with "rear shifted bracing", where position of the "X" moved further than one inch from soundhole (exact measurement varies, for example: a 1941 D-18 has 1 7/8" distance). So the X-braces were moved about 7/8" further down. And the tone bars were angled more parallel with the length of the guitar and further apart. These late-1938 to late-1944 guitars had deeper scalloped braces than the 1938 and prior forward or advanced braced guitars. This gives the late 1938 to late 1944 Martin guitars improved bass response (don't let anyone tell you that war-time Martins are not as good as pre-1939 Martins!)

Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Shape Shifter - String Instrument Finish: High Gloss Natural
I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.

ZPS (ZERO POINT SYSTEM) OF ZR TREMOLO Ressort principal Butée Bloc de vibrato Tige d'arrêt Une fois la guitare correctement accordée, réglez le ressort principal pour faire en sorte que la tige d'arrêt soit en contact avec le bloc de vibrato et la butée. Si la tige d'arrêt n'est pas en contact avec le bloc de vibrato et la butée, réglez la vis de réglage du ressort principal jusqu'à...

I've been a guitar player for decades but only recently became serious about working on my instruments. In my research, I’ve found hundreds of articles about instrument repair, and while many are fantastic and chock full of information that’s invaluable to musicians, a lot is impractical or requires more space or specialized tools than most of us have. Plus, some repairs, such as fretwork, nut replacement, under-saddle pickup installation and finish repairs are best left to professionals.
The SG retains a similar dual-humbucker configuration as the Les Paul Standard but it truly has a life and style all its own. Due in part to its aggressive style, impressive mid-range bite and thunderous output, the SG has become synonymous with rock ’n’ roll. The Gibson SG is one of only a handful of models that has never been out of production since its introduction in the early ’60s.
Their designs do not require them to have comparator inputs as with solid-state amps. The small amount of negative feedback in valve amps is only required to provide damping to the speaker. Valve Amplifier Design From physics we know certain things must be a particular order and size to be efficient and this is acutely so with valve amps. 60Watts is the minimum power capacity for an amplifier to bring quality speakers to life with full fidelity.

Strumming Patterns: Tremolo is a tough fit here for the same reason as delay. Timing and repeating issues both tend to cause problems.Chords: This can work if used sparingly, especially when strumming patterns are simple and chords are allowed to ring.Short Arpeggios: Particularly if played during a verse, short arpeggios are easily benefited and improved by a light tremolo effect.Quick Solos: Any unique, lead guitar part that needs something extra can be a good spot for the tremolo effect. Usually this will occur during the bridge of a song.

The benefits of owning a combo amp and one or more powered speakers is that a bassist can bring just the combo amp to recording sessions or small venue gigs, but bring the combo amp and the additional powered speaker(s) to large venue shows to add more stage volume. Another benefit of having a combo amp and additional powered speakers is that the bassist could leave the additional powered speakers in the rehearsal space (or, if playing as a house band for a club, on the venue's stage), and only carry the combo amp back and forth from her home to rehearsals or shows, saving time and energy.
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.
Correct bridge placement determines a guitar's intonation when playing fretted notes. The distance between the guitar nut and bridge is the scale length. Placing the bridge too close to the neck shortens scale length and makes fretted notes sharp. Moving the bridge too far from the neck increases scale length and creates flat fretted notes. No amount of tuning helps a guitar with a poorly positioned bridge. Any fretted note falls high or low of the desired pitch.
The body of the PRS SE Standard 24 is made of mahogany and features a tobacco sunburst finish, vintage cherry, or translucent blue finish. Compared to most other body styles, this one is a lot more comfortable to play even though mahogany isn't the lightest tonewood out there.  The balance offsets any weight issues. The neck is a maple piece that comes with a standard rosewood fretboard and PRS classic bird inlays. The pickups PRS chose for this build are their S2 HFS Treble and S2 HFS Vintage Bass units. Their performance and color are pretty unique when compared to other designs out there. Looking at the hardware, we see a PRS S2 tremolo bridge on one end, while the headstock houses a set of PRS S2 locking tuners. Combined, these two components give you the ability to achieve great tremolo effects without losing intonation or tuning.
I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries. respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.

The first thing that strikes you about Nate Savage’s Guitar Lessons YouTube Channel is how well the structured, numbered lessons are organised on the YouTube Home page itself. Overlays on the opening titles screens and the names of the lessons make it very clear about the content and help you to choose exactly what you need, or let you skip over any unnecessary stuff. His complete beginner topics go right back to “How To Hold The Guitar” which might sound really basic, but Nate’s absolutely right to nip any bad habits in the bud at the very beginning and that particular video could the most important 3:26 of your career. And I have to make mention of the high production levels on Nate’s videos. The vision and audio is excellent, the lessons are well made, and Nate’s friendly, easy-going manner makes you feel like he’s your best friend and guitar tutor at the same time.

MAKING A TEMPLATE Once you have traced out your design to the wood you can start routing. I recomend making a template first for the body rout out of 1/4" hard board or something equivalent to that. The professionals use cnc machines to carve and rout the bodies but smaller shops will use templates made from acrylic. The hard board works just fine, but might not last as long. You can also rout the body by hand and forget the template but if you mess up there's no going back so be carefull if you do.
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.

Although most of us who participated in this article have years of experience with guitar amps, none of us was particularly familiar with all the latest beginner models. There are few reliable professional reviews of beginner amps, but I sorted through what we found, searched through music stores and websites, and sampled numerous models at the recent National Association of Music Merchants (NAMM) show in Los Angeles. This experience gave me a good idea of what’s available now.

As a musician for 50 years and a custom builder for 30 years I definitely believe that wood choice has an effect on the tone and sound characteristics of an electric guitar. In my younger years as a cabinet maker, I was helping install a large church pipe organ (Cassavan I believe). The installer from Montreal and I had some discussions about wood and specifically wood properties best for certain applications. He told me that they used poplar for the spacers between the organ pipes because as a good tone wood, sound did not bleed from one pipe to another which is very important with pipe organs. They are the oldest and I believe the largest pipe organ manufacturer in the world and have done a lot of trial and error in this area according to the installer as to what wood works best. I happen to agree with them and agree that poplar is an excellent tone wood and works very well in guitars. Jackson guitars use poplar in there guitar bodies and is a great sounding tone wood. I use it a lot in my custom guitar because of the nice tone it produces.
So, learn chords, along with their related chords, and many, many songs will be at your fingertips, even songs you don't know or haven't played yet. As a teacher, I've shied away from teaching songs for learning the particular song's sake. There are many guitarists out there who 'haven't learned the chords to that song,so I can't play it'. Usually they actually have, but don't understand how to put them together to make that song. Also, learning a song generally means putting the particular set of chords in one order. Change key, and the fumbling starts.
Kramer served a prison sentence on drug-related charges after the MC5 split up. When he got out, he teamed up with Johnny Thunders to form Gang War and later re-emerged as a solo artist on L.A. punk label Epitaph. Smith went on to lead the punishingly loud Sonic Rendezvous Band and married New York punk rock poet, artist, singer and originator Patti Smith. He passed away in 1994. But from the Clash to Fugazi, Crass and Green Day, the politicized wing of punk rock continues to fly the banner first raised by the Motor City 5.
The third technique I would like to talk about today consists in, once again, doubling a distorted, or not, guitar sound with a...folk guitar. This will give you much more definition and sustain on arpeggios, while on rhythm guitars it will allow you to highlight the sound's percussive aspect, and on power chords it will make your sound more powerful. This production technique has been around for ages (Led Zeppelin was pretty fond of it, for instance). But this doesn't mean that it's an outdated trick and it can't be used on modern productions: lots of contemporary metal bands still use it nowadays.

Who are you to state that Taylor guitars are among the best in the world? Are you from California? I don't and many other don't feel that way. Taylor just does not have the sound of other fine acoustical guitars. I'm not putting Taylor down. It's a well built acoustic but I don't quite like the sound of them. That's a biased and very bold statement you made about Taylor and it's not true. There are so many great acoustic guitar builders around this planet that do build superb guitars. Please, lets not put a Californian Company biasedly on top of everything on the planet. Can we do this please? I apologize for this email but what you stated is so unfair for all of the others guitar companies that build outstanding guitars, worldwide.
Another early solid body electric guitar was designed and built by musician and inventor Les Paul in the early 1940s, working after hours in the Epiphone Guitar factory. His log guitar (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Swedish hollow body halves attached to the sides for appearance only) was patented and is often considered to be the first of its kind, although it shares nothing in design or hardware with the solid body "Les Paul" model sold by Gibson.
The Reaction Many manufacturers reacted by making warranties void if amps were driven at full power, some threatened to cut off retailers who sold their amps to bands that played ‘music of the devil’. The parody of this historical contradiction has been rewritten, to fit mythical beliefs that brilliant designers created these amps for what ‘rock musos’ wanted.

E-B-E-G#-B-E (use light gauge strings because three strings must be raised) Open E is used by: Brian Jones on "No Expectations", "I Wanna Be Your Man"; Keith Richards on "Salt of the Earth", "Prodigal Son", "Gimme Shelter", "Jigsaw Puzzle", "Jumpin' Jack Flash", "You Can't Always Get What You Want" and by Bob Dylan on his 1975 album Blood on the Tracks. By Hoobastank on their first and second albums, and by Junior Campbell on The Marmalade recordings Reflections of My Life and I See The Rain Used by Johnny Marr of the Smiths on "The Headmaster Ritual".

Plug one in, and you'll understand what an acoustic instrument is supposed to sound like while playing live. Unplugged they sound great as well, especially the deep bowl models. I hear from my friends that they think those rounded backs feel awkward to play while sitting down. I have a deep contour bowl, that is way more comfy playing relaxed in my couch than even my little 000-martin.

Description: Body: Maple - Flamed - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Custom - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Brown
Here's a fresh one from the JVG Vault... vintage tone much like an old classic Martin Acoustic has some wear and has the "feel" just feels great in your hands and plays & sounds wonderful. Good volume and rich sounding lows and very nice.. condition rated at a solid 8.5 / 10 or better no cracks no repairs and plays nicely with original nut & saddle still in place , optional change nut & saddle & set up add $80.00. Please SEE MORE FULL SCREEN HIGH RES PICTURES HERE:
Several producers like to create larger-than-life recorded sounds by splitting the guitarist's instrument signal to several different amps, which are then recorded simultaneously. Joe Barresi is a devotee of this tactic, and uses a dedicated guitar splitter box, such as the Little Labs PCP Instrument Distro or Systematic Systems Guitar Splitter, for the purpose. "In choosing the amplifiers and speakers, it's important to remember that larger speakers give a more compact, tighter sound. A tiny amp turned all the way up will give a more blown-out sound."
{"pageName":"[gc] pdp: old kraftsman 196s k3 solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113469598;;;;evar65=Vintage-Guitars-Old Kraftsman","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
So the actual vibrating length of the string should be the same in all cases, and if that's all that affects the magnetic field then none of the other things mentioned above should affect that signal. Do a simple test protocol such as plucking each string with the identical pick, record the waveform, overlay them and look for differences in the waveform.
I am writing this due to the mixed reviews that I read before buying this. This is a really powerful device. I have had a POD 2.0 for years. This is just as good and is also small, portable, and inexpensive. Most of the criticism that I read is that it is not well made and durable. It is well made, but I don't think it is designed for gigging. It is perfect for practicing or interfacing with a home studio. If this is your application, then you will be very satisfied. One other thing that I found true of this and similar devices that I own is that the quality of the headphones makes a big difference. If you use studio quality headphones it will sound great, if you use music player headphones it will just sound good. I haven't ... full review
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
In the 1970s and ’80s the sound of the electric guitar was stretched in heavy metal music. As one of its leading practitioners, Van Halen pushed his self-built “Frankenstein” (based on a Stratocaster but with a mish-mash of other guitar parts) to the limit, experimenting, for instance, with “dive-bombing,” which uses the tremolo arm to drive the guitar’s lowest note ever lower. Hendrix had done this but forced the guitar out of tune as a result. However, by the mid-1980s, inventor Floyd Rose had improved the tremolo system, allowing players like Van Halen to dive-bomb repeatedly. The guitar sound was now not only loud but also really raucous, flashy, and a bit dirty—just the way musicians, and their fans, wanted it.
On my bench today, a partscaster with a Hamer Slammer neck, Carvin Rail in the bridge, Ry Cooder Dearmond middle, and PRS P90 in the neck. Wasn’t quite right (throbby) with the usual 3 250K pots and an 022 orange drop (i know, i know, but they aren’t that expensive). So, i went with 500K master vol, 500K master tone (found an old ceramic PRS 022 cap too), and an acme blender pot (neck and bridge) in the last position. Now it’s fun. Lots of variety in positions 1, 2, 4, & 5. 3 knobs and a whammy and she’s done.
Particularly if you want to get into recording and production, this Blackstar model is ideal. With six distinct “voices” from Clean Warm to OD2, as well as 12 stereo effects, there is a huge range of tones and options to play with. Together with the patented ISF control it allows for a nuanced choice of timbres, allowing you to immerse into exactly the sound you are after in gloriously deep Super Wide Stereo.

A reverb pedal basically gives an echo effect and gives your guitar more weight. Think of the sound you hear when you walk into a church or cave – a big expansive sound that reverberates off the walls. In addition, if you want to completely oversaturate your sound with reverb to sound like you’re in a massive cave, you can turn the reverb up all the way and engage it when the song calls for it.
Sound images are very similar to visual images. If you're in a large auditorium, but standing on stage right next to an actor's face, you will see every nuance of his face, pimples, pores and all. You will not see his whole body though, and you won't see him in the context of the rest of the stage or the room. If you move back to the tenth row, you will lose some of the facial detail, but you will gain perspective. If you move to the rear of the auditorium you'll lose all the detail of the actor's face, but you see the whole enchilada in perspective.

It has a solid poplar body with a maple neck and rosewood fingerboard, and based on the early reviews of the Epiphone Les Paul SL, the fit, finish and general playability are all pretty good. It’s loaded up with Epiphone’s reliable tune-o-matic bridge, a volume and tone knob, as well as a three-way selector switch to toggle your pickups and dial in tone. The hardware does feel admittedly cheap, but the general consensus is that this guitar ships well-made, well-setup and more than appropriate for a first-time player.

The hollow body electric guitar rose to prominence when Gibson introduced the ES-150 back in 1936. Fully hollow body electric guitars (sometimes referred to as “Jazz Box” guitars) tend to have arched tops and large, deep bodies that allow the sound to fully resonate to produce an incredible full-bodied voice with amazing projection and depth. Jazz players and blues players really love the sound fully hollow guitars deliver. While the classic, larger-bodied fully hollow electric guitars definitely still exist, there are also a substantial amount of thinline fully hollow body electric guitars that guitar players may find to be more comfortable. Guitar brands such as Gibson, Gretsch, Ibanez, D’Angelico, Guild, and Epiphone provide guitar players with a fantastic array of fully hollow body electric guitars.