One cool thing about liking oddball old guitars is they always contain hope…and a challenge. By which I mean, no matter how obscure or exotic, you always live with hope that you’ll someday figure out what the heck they are and thrive on the challenge of trying to do so. At least that’s been my repeated experience over the last quarter century or so of playing guitar detective. That being said, this 1967 Apollo Deluxe was kind of the exception that proved the rule, in that it followed a reverse pattern, sort of backing into discovery.
Use a lead to connect the row that the positive (anode) leg of the input cap C1 is on to the row that the base (middle leg) of the transistor Q1 is on. Use a second lead to connect the emitter row (left hand leg) to the ground bus. Finally, use a lead from the collector (right hand leg) row to a new row on the other side of the breadboard, near the power bus.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
[author image=”https://www.producerspot.com/wp-content/uploads/2014/02/alan-steward-avatar.jpg” ]Alan Steward is a Producer, Engineer and Musician with over 30 years experience in the music business. He worked with Grammy winning artists from the Temptations to the Baha Men. His music has been used in TV shows and feature films. He is also well-known as a producer of loops for music production and owns a recording studio in Germany.[/author]

Other artists, such as George Benson, John Lennon, and the world renowned B.B. King would use the instrument to its fullest capability to produce a clean, bright, woody tone reminiscent of fully hollow guitars, while being able to provide the volume levels to perform in much larger concert halls without the inherent issues known with fully hollow body guitars.

I don't understand why everyone is so "Gibson is the best". They have been going downhill for years. Unless it's a custom shop job, it is hit or miss. the same with Fender. Everyone likes them because of the mystique of the players that played them over the last decades. It's a "lifestyle cult" with name recognition. If you want a guitar that plays and sounds like a Gibson of Fender is supposed to but want to be guaranteed of the quality you are receiving and spend for a fraction of the money, then get a used USA Custom Shop made Washburn. You will never look back. I say used because the Chicago custom shop has apparently closed. Anything made there from about 1993 - 2008 that looks like a competitors guitar will outmatch the competitors version every time. You will notice that it is hard to find a used custom shop Washburn around. That's because they are the guitar worlds best kept secret. The people in the know get them - at a massively reduced price - and keep them. People hang onto their USA Washurns for the most part and there i a reason for that. They are that good.
Distortion effects are really like an overdrive pedal taken to another level. Many distortion pedals are simply overdrive pedals with the ability to dial in a higher gain setting (“Gain” can be thought of as the volume going into the overdrive components of the pedal). Some pedals will also have a built in equalizer to shape the tone of the distortion.
Call of Duty: Black Ops III is the ultimate 3-games-in-1 experience. In Campaign mode, you must navigate the hot spots of a new Cold War to find your missing brothers. Players can play the campaign cooperatively or solo and are now always connected to the intelligence grid and their fellow operatives during battle. Multiplayer features a new momentum-based chained movement system, allowing players to fluidly move through the environment with finesse, using controlled thrust jumps, slides, and mantling. Black Ops III multiplayer also introduces the new Specialist character system, which allows players to master 9 characters' battle-hardened weapons and abilities through a challenge-based unlock progression system. No Treyarch title would be complete without its signature Zombies offering. "Shadows of Evil" has its own distinct storyline right out of the box, set in the fictional 1940s Morg City, where four particularly troubled individuals — the femme fatale, the magician, the detective, and the boxer — star in this film-noir inspired horror story.
We wanted to find electric guitars that sound as good as possible and in a blind test would make anyone hesitant. We must advice you to not only take our word for it, though. When buying a new guitar you should always try it out and compare it to other guitars. Even if it on paper might look like a guitar must be the best one for you, that might not be the case when you actually try it out. The sound might be great, the brand famous and the price ok, but you need to be able to feel like the guitar is an extension of you, and the only way to make sure of that is to try before you buy.
Maybe a more modern, streamlined strap is better suited to your personality. No problem: the best-selling El Dorado Durango Suave Leather Strap uses the same top quality material but in a smoother style that's ideal for acoustic or electric rock guitarists. It comes in a variety of colors so you can seamlessly customize to your favorite looks. Comfortable, adjustable and lightweight, this thick edge-stitched leather strap travels easily wherever you go.
With that in mind, the quality of said effect is satisfactory, to say the least. You maybe won’t see the same level of refinement as you would in some stand-alone models, however its reverb comes across as fairly organic. On top of that, you are presented with several decent options. All of that aside, the real value of this Zoom comes from its ability to combine up to 6 effects at any given time.
Another thing that endears them to many guitarists is that they source 100% of their woods from sustainable sources and they use hydro-electric power. When it comes to the environmental footprint of a guitar, this is an area where Seagull are out in front and the big name brands, who while working hard to improve their own environmental impacts, are still playing some degree of catch-up.
Yeah. The tremolo sound from the intro? That was four Fender Twin Reverbs. Myself controlling the speed of two of them and the producer controlling the speed of the other two. So two amps were recorded on one side of the stereo and the other two on the other side. I recorded the part on the tape without the tremolo, and then I sent the part from tape out to four amps, and he controlled two, and I controlled the other two.
I play a Breedlove and it compares very favorably with Martin, Taylor, and Gibson while I prefer it to Fender acoustic guitars (I think Fender electrics are much better). Beautiful tone, and in one place where I play I'm not allowed to plug in. At that place, my Breedlove is the only one of my guitars I can get sufficient volume from. My other guitars are a Martin, an Ibanez, and a Schechter. Breedlove should be in the top ten.

Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.


Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.
The EB-18 was the first electric bass the Martin company produced in 1979. The single-pickup EB-18 was a partner to Martin’s E-series electric guitars. Its scroll-shaped headstock was reminiscent of the Stauffer-style pegheads of early Martins. The EB-28 was added to the line a year later. It had a mahogany body and PJ pickups. Both models were discontinued in 1983.
The Ibanez Artcore line is a beautiful example of modern guitar manufacturing. Normally, hollow-body guitars, even those from Epiphone, provide interesting challenges to companies trying to produce axes on a mass scale, and thus they have to charge a higher dollar. The Artcore series provides buyers with an option to shell out a fraction of the price for a really impressive guitar. The AF55 is a fully hollow option that will make you think you should have paid double for it.
When people ask "What are the guitar string sizes?" they really want to know about the gauges, the term referring to the diameter of the string.  The answer is... that's not quite how it works.  Yes there are standard gauges but in several standard sizes like light, medium, and heavy.  Each, when properly tuned, will exert a different tension on the guitar's neck and if you jump to another size you'll probably need to adjust the truss rod and get used to the new action of the fingerboard.
The SparkFun Proto Pedal is an easy-to-assemble kit that makes building guitar effect pedals easier. Let’s face it, most guitar pedals start with all-too-similar circuitry – you need the input and output jacks, the bypass switch, and a barrel jack for power input. In some pedals, there may be as much wiring involved in the jacks and switch as there is in the effect itself. The SparkFun Proto Pedal takes care of the hard part and provides you with a simple infrastructure; all you need to do is decide what simple circuit to make to gain your desired effect, and you’ll be ready to rock!
The Dean Custom falls right in the middle-range for guitars under $500. For around $350, this guitar has some great perks such as the Floyd Rose locking tremolo. The beauty of the Floyd Rose is in its ability to keep the guitar in tune even during crazy changes in pitch. Greats like Steve Vai and Eddie Van Halen are just a few notable artists to rock out using the Floyd Rose. With a carved flamed maple top and a lightweight basswood back, this guitar has the looks, the sound, and the ability to keep rocking in tune no matter what you throw at it.
Much like booster pedals – where its placement depends on what exactly you’re looking to boost – the location of compressors and wah-wah pedals in a signal chain will vary depending on what type of sound you are trying to create. In this case, you are encouraged to experiment with their order and see what you like best. Although as mentioned above, try to keep the wah-wah after tier one effects as they generally do not sound that usable in that order. Compressors, on the other hand, can be placed before any pedal, even distortion, as it shapes the signal rather than modifies it.
BC Rich is a fashionable brand of guitar that has been available since the year 1969. This is an American brand of acoustic & electric guitars & bass guitars. The brand produces 6-string electric guitars mahogany or basswood bodies. This brand is not as popular as other brands of electric guitars as it specializes in guitars for heavy metal & hard rock crowd. It is the choice of only those guitarists who are looking for an instrument that looks sound as edgy as possible. It offers trendy appearance and classic style of playing an electric guitar. The starting price of this brand of guitars is 29,000 INR approximately.
The final stage of our ME-80 signal chain is delay and reverb. These ambience effects create the illusion of playing in a different space. It makes the most sense to have them at the end of your effects chain. If you think about it in real life terms, a sound is fully formed it goes out into any space. As a side note, delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
The Gibson Mandolin-Guitar Mfg. Co., Ltd. was founded by Orville Gibson in 1902 in Kalamazoo, Michigan when he brought in a consortium of investors to finance expansion to keep up with demand. Orville had been selling his hand made instruments since 1894 and was awarded a patent for his one-piece designed mandolin in 1898. He also invented Archtop Guitars around that same time by applying similar lutherie techniques to those used on violins.
Although originally founded in California in 1979 as a company that made replacement parts for guitars, Schecter now produce many models of their own – both mass-produced and custom shop guitars. Like the others on this list, Schecter provide guitars for some big names and have a range of signature models including the guitars of Dan Donegan, Keith Merrow, and Jeff Loomis.
Besides the recognizable brand, there’s the sound quality, that earned it good appreciation even from experienced guitarists who are used to more expensive units. It has a standard 12” speaker that allows it to render treble and bass equally well, for a good range of sound which should make it suitable for country, blues, and jazz, as well as softer rock.
The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.
Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.
Although most of this article deals with miking regular guitar amps or using various DI options, there are also some great sounds to be had using very low-power guitar amps — even battery-powered ones. You can see these in music shops, often designed to look like miniature versions of Marshall, Fender or other top-name amplifiers. While some sound pretty grim, others sound surprisingly musical and raunchy. Obviously they don't have a lot of low end, but if you mic them closely to exploit whatever proximity effect your cardioid mic has to offer, and use EQ cut to tame the inevitable mid-range resonance, you can get some really great sounds. Best of all is that these things are cheap, so you can afford to experiment, and they also come in useful for their intended purpose, which is practising, something we all tend to do too little of when we get caught up in recording technology.
Although acoustic guitars have recently surpassed electrics in popularity, the electric guitar is still the most prominent instrument in rock music, and it’s a key component in many country, R&B, pop, and jazz groups. If you want to play in a band, you’ll probably want an electric guitar. You’ll also want one if you want to develop the ability to play melodies and solos because electric guitars are, in general, better designed to accommodate fast fingering and more able to stand out in a musical group.

Paul Reed Smith Guitars (better known as PRS) is a Maryland-based manufacturer, and relatively new in the world of guitars – founded in 1980, when they began making a series of hand-built guitars. Today they have a wide range of models, which are built in both Asia and America, as well as a full roster of artists playing their guitars; including Mike Oldfield, Dave Navarro, Carlos Santana, and Mark Tremonti.
For acoustic guitar players (and electric players) there is simply nothing to dislike about the Hall of Fame reverb pedal, unless you just dislike ambient effects in general. The HOF is one of the most well-put together ambient stompboxes we've ever used, and it's perfect for acoustic guitar tones. When you're adding effects to your acoustic guitar, reverb is one of the best suitors for several reasons.
Make sure to check out my other 100 guitars!!! shipping to the lower 48 states.I will not ship anywhere else,Make sure to check out my other 100 guitars at my ebay store "Axes Bold As Love Guitars". I have added a new part to my ending statement.I now recommend that all the guitars I sell be set up to your preferences. ALL GUITARS MAY REQUIRE SET UP!!! Players have such varied opinions that I no longer want to hear about it. Here is a very cool SX "Custom Shack Strat". The maple 21 fret neck is from a SX VTG Series and was removed from a brand new guitar.These are very nice necks. Zero fret wear . The very cool Gloss Sunburst body is an aftermarket Body made of very light and resonant Paulownia wood. It was new when I built this guitar,has no dings,or indentations,just light surface scratches.

you put in a lot of work, its not biblical correct, pretty good...but take with a grain of salt. but some guitars are made in Korea. I bought a Yamaha 3 piece back like a Kiso Suzuki, I would it was made in Japan The tuners said made Japan. I thought the pawn shop was crazy. I got it for $100 Love this guitar and then one day I looked at the the decal in the sound hole and in the tiniest print "Made in Korea" I felt a pang like o' crap I bought a Korean guitar. But I have a few Acoustics High end a Guild made in the 80's and this Yamaha is incredible. better or just as good as my old Suzuki
Original plate reverbs were mechanical in nature. There was a literal plate inside the amplifier, which would transform input signal into vibration. Then you would have a pickup located somewhere near the plate, that recorded those vibrations. Today, such a contraption comes across as relatively crude, but many still love the unique mechanical sound it produces. Spring reverb uses a pretty much exact same principle, only this time you have a spring in there instead of a plate. The biggest improvement a spring reverb offers is reduction in both weight and size of the device.

For the hobbyist guitarist this is a great 'bang for the buck' investment. It has practice tools for the beginner but solid tones for the advanced guitarist. For home use, maybe even a garage band it's perfectly adequate. If I were a more serious musician doing gigs with high end audio going to the audience, I'd be investing more than a hundred bucks in my stage rig.
Let’s kick things off in style. This guitar is one of Epiphone’s mid range semi-hollow models. As such, it has to meet much more refined standards. Many wondered if Epiphone was capable of delivering such a guitar, but the answer is a strong yes. With its three Dogear Alnico pups, this thing is a beast. If you know how to handle a semi-hollow, you will find that Epiphone Riviera Custom P93 brings a lot of range. At least that’s the type of impression it left on me.

With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.
Boogex is a guitar amplifier plug-in with a variety of sound shaping features.  With Boogex it is possible to get heavy distorted sound as well as slight distortion sound.  Boogex is also able to apply any speaker cabinet impulse response (selection of built-in impulses is available).  Processing latency is very modest - 96 samples (2.1 ms at 44.1kHz).  Boogex comes with several example factory presets.
Introduced around the same time as the White Falcon, the Duo-Jet (6128) became another hit for Gretsch, especially after a young George Harrison played one with The Beatles in the early sixties. While finding an original Gretsch is very expensive, the brand still makes faithful reproductions of most of its historic models and are popular with guitarists with a penchant for vintage.
Here for you is a beautiful Vintage 1964 Epiphone Frontier FT-110 acoustic guitar. This guitar is 100% original and comes along with it's original hard shell case. The guitar plays and sounds just great. These Epiphone guitars were made with a full 25 1/2" scale. The sound is just outstanding and the playability is fantastic. If you have any questions, feel free to either email us at or call .
Standard tuning but with the 6th string dropped one full step. Utilized by bands and/or artists: Radiohead, Avenged Sevenfold, Arrowmont, Kvelertak, Led Zeppelin on "Moby Dick", Jack White on the song "High Ball Stepper", Rage Against the Machine, Prayer for Cleansing, Lamb of God, Underoath, Evanescence, Silverchair, Muse, Skillet, Helmet, Soundgarden, Metallica on songs "All Nightmare Long" and "Just a Bullet Away", Rammstein, Fugazi in some songs, Tool in all their albums (except Prison Sex which is Drop B in standard variation Tuning and Parabol/Parabola which has E dropped to B and A dropped to E), C3 Church on their song Breathe, as well as numerous songs on older albums Stone Temple Pilots in some songs, Audioslave, Filter, Foo Fighters, Porcupine Tree, Incubus in some songs, Guns N' Roses on the title track and "Better" from Chinese Democracy (most of the rest of the album was in E♭ tuning), Black Veil Brides (on the song "Knives and Pens"), The Devil Wears Prada, Nirvana in some songs, Zakk Wylde in some of his projects, Quicksand, Alesana, Eyes Set to Kill, and The Beatles on "Dear Prudence", Iron Maiden on "If Eternity Should Fail", Jorma Kaukonen of Jefferson Airplane on Embryonic Journey from the Surrealistic Pillow album, All Time Low on the biggest part of their discography.

Fuzz – A dynamic distortion effect that sounds just like the name. Fuzz was originally created by putting a pinhole or cut in the speaker of an amplifier. Original fuzz pedals use a transistor-based circuit to create the sound. Compared to distortion, fuzz is more raw, abrasive and doesn’t compress the tone. These pedals typically perform best at the front of your effects chain into a clean amplifier.

The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.
In this buying guide, you’ll learn the essentials of what effects pedals do and which ones to look for depending on the kind of tone you want to experiment with. Here’s the quick overview: effects pedals (also called “stompboxes”) are electronic devices that connect in-line with your guitar and amp to change the signal going through them. Some work with analog circuits and some are digital, but they’re all powerful tools for shaping your sound in endlessly creative ways.
The main benefit with tube amps is the tone. They offer what is often described as a pure, natural, creamy or fluid guitar tone, which is incredibly responsive to the player’s dynamics. When pushed hard enough, they overload and produce natural overdrive (which is how overdrive first came to be). While their tone is hard to beat for all styles of music, tube amps tend to be expensive, harder to maintain and heavier than other amps. For more on tube amps, check out our dedicated tube amp page.

Many of the best guitars I saw in my trip to Japan were models made for their own domestic consumption. After World War II, U.S. Armed Forces Radio blanketed Japan with American music. As a direct result, rock and roll, country, bluegrass and American popular music all took strong root in Japan creating a vibrant market for good guitars. Although Japanese players would have preferred to be able to buy genuine American Martins, Fenders and Gibsons, the supply of such instruments in Japan was extremely limited and prices were simply beyond the budget of most of the Japanese population. Japanese manufacturers produced a very wide range of instruments from low-priced student models on up to remarkably sophisticated professional-grade instruments, some of which were better reproductions of vintage American instruments than any of the American manufacturers were doing at the time. These high-end instruments are seldom encountered in the USA because they were priced high enough that wholesalers in the USA did not find them economical to import. Regardless of how good a Japanese guitar of that time might have been, if it cost anywhere near the amount of a new Martin, Fender or Gibson in the USA, there would have been no point in bringing it into this country. For example Tak Inoue, the export director of the Morris Company of Matsumoto, Japan, told me at that time that he had approached Fender to offer them Japanese-made versions of the Telecaster and Stratocaster which he proposed they could import and sell at a lower price that the standard American-made models. He told me that he gave them what he considered to be a very competitive price only to be told that Fender would not be interested since their cost at that time to make a genuine American made Telecaster or Stratocaster in their Fullerton, California, factory was actually lower than the amount quoted by Mr. Inoue. Needless to say, it would appear that CBS, the owner of Fender, had a very good profit margin at the time.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
“The tremolo tail assembly was engineered specifically for the Spectrum ‘5.’ The bridge is an integral part of the whole assembly and is, of course, universally adjustable. The marvel of it all, however, is that the tremolo does not exert any friction (hence no wear and tear) on the strings. The tremolo action causes the whole bridge assembly to move smoothly back and forth.

The Boss Waza 212 Guitar Amplifier Cabinet has been specially designed as a partner to the awesome Waza Amp head. Packed with 2 custom made 12 inch speakers and ready to roar! You can even select whether you want the back to be open or closed, allowing you to make whatever sound you want! If you want extra speakers, there's also the Boss Waza 4x12 Guitar Amplifier Cabinet with 2 x 12" speakers to pump out your riffs with.
The following chart will help you choose the right sized guitar for your child. It is important to note that guitar size is only one part of making it easy for your child to play. An un-adjusted guitar will not be easy to play, even if it is the right size. Here at FirstGuitar.com, each guitar is inspected, properly adjusted and set up so that the strings are easy to press down and the notes ring clearly.
The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
I skimmed ahead and quickly realized that, at last, someone has written THAT GUITAR BOOK that we are all looking for when we start out but that no one seems to have written yet but that you hope to write someday when you finally figure out what you are doing so that you can help others and prevent them from wasting so much time and money and hopes....(takes a breath)

The thoughtful design and close-tolerance machining of the mechanical components of most electric guitars enables them to be set-up and adjusted with great precision. But it is important to make these adjustments in the correct order- Neck-Nut-Bridge saddles. Making fine tune adjustment to any of these elements without reference to the others, or out of this order, will prevent a guitar's true potential from being realized.
Go ahead – visit a music store and spend a few minutes on different guitars. If you see the same models listed here, that’s great. If not, then look for a model that has roughly the same size and shape as the one you’re eyeing. If you’re keen on buying an acoustic guitar online, take note of the model or size that feels the most natural to you, then go for that.
One important thing to keep in mind about effects pedals is that the signal is doing a lot of work going through the complex electronics in them, and some effects play better as inputs for others. This all means that the order of your pedals does matter to some degree, depending on which effects are in the lineup. You can, of course, experiment to see how different orders affect the sound and that can be part of creating your own signature effects profile. But as a rule of thumb, here’s the basic order you should follow for your first foray into effects chaining:
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! VoteinNovember
×