Frankly, learning to play a song the Rocksmith way is exhilarating. If I (Carl) had looked up the chords online, I could have played the song just as easily. But I might have stopped to scroll down on the computer screen or to relearn the first half of the song until I got it down pat. After a few progressively more difficult play-throughs on Rocksmith, I'd memorized the song without even thinking too hard about it.
The original Overdrive pedals were created to mimic the sound of tube amps being cranked to 10. This will cause the tubes to be pushed to their limits, producing a crunchy and aggressive tone. The sound of overdriven tubes are certainly iconic as it gave birth to the sound of Rock ‘n’ Roll. However, the problem with bringing your volume up to 10 to overdrive your tubes is that it gets really, really loud--safety hazard loud.
The guitar's contribution to the sound comes from its mechanical construction, including the type of wood used, and the pickup system fitted. The hugely popular Fender Stratocaster uses simple single-coil pickups, which tend to give it a bright, articulate sound that doesn't take up too much room in a mix. Guitars with humbucking pickups, on the other hand, tend to have a thicker, more solid sound that can overpower other guitar parts or other mid-range instrument sounds. Tonal qualities aside, humbuckers by their very nature are designed to reject electromagnetic interference, while single-coil pickups are very susceptible to it. Specialist stacked humbuckers, such as those made by Kinman, Dimarzio, Fender and others, are available for use where something close to the original tonality is desired but without the noise problems, and for serious studio work these are a good option. Note that CRT computer monitors emit a lot of electromagnetic radiation from their scan coils, so a flat-screen LCD display is always an advantage if you need to record guitar into a computer system.
Guitar amp modeling devices and software can reproduce various guitar-specific distortion qualities that are associated with a range of popular "stomp box" pedals and amplifiers. Amp modeling devices typically use digital signal processing to recreate the sound of plugging into analogue pedals and overdriven valve amplifiers. The most sophisticated devices allow the user to customize the simulated results of using different preamp, power-tube, speaker distortion, speaker cabinet, and microphone placement combinations. For example, a guitarist using a small amp modeling pedal could simulate the sound of plugging their electric guitar into a heavy vintage valve amplifier and a stack of 8 X 10" speaker cabinets.
Up for sale, a 1956 Fender Deluxe in excellent condition and in perfect working order. A previous owner also very lightly added their ID number to the faceplate between the On switch and Tone knob. It's an example that will satisfy collectors and serious players alike, and the amp has recently been given a clean bill of health, ready for your next gig or studio session.
Another issue is the fact that, in this circuit, the tone pot always has a cap engaged. You could use a really tiny value for the smaller cap so there’s little perceptible cut at the minimum setting, but that can make a substantial part of the pot’s range a little too subtle. So my plan is to combine this with a Ned Steinberger-designed JackPot as the volume control. This part has an “off” setting that bypasses the tone circuit entirely for a maximum-bright sound. That way, I’d choose for the smaller cap a value that provides the minimum treble cut I’m likely to want. (I suspect I’ll wind up with something between .0022µF and .0047µF.)

#5? Are you joking? I have a PR-200 that I've owned for 15 years. I hate it. The action is ridiculous unless your fingertips are made out of adamantium or whatever the heck Wolverine is made from. The sound is muddled and a clash of midrange. Sustain is nonexistent. The frets have flattened on the high strings. News flash- I'm not spending $350 to re-fret a $279 guitar. Epiphone may make some good high end guitars but I don't trust them. If you make crappy low end guitars why should I trust your brand? You were supposed to get me to fall in love with the brand but you've made me hate it. My next guitar will be a Yamaha, Martin or Taylor.

Russell, George (2001) [1953]. "Chapter 1 The Lydian scale: The seminal source of the principal of tonal gravity". George Russell's Lydian chromatic concept of tonal organization. Volume One: The art and science of tonal gravity (Fourth (Second printing, corrected, 2008) ed.). Brookline, Massachusetts: Concept Publishing Company. pp. 1–9. ISBN 0-9703739-0-2.
Nowadays, you can find many in-between sets, but you'll want to have a solid understanding of what the gauges are in terms of actual measurement and how they affect your ability to perform with your desired tone.  These relatively open descriptions will also differ from acoustic strings to electric strings, so your experience in handling many types of guitar strings and gauges is paramount in making the right choice.
Delay pedals are among the most popular effects around, and the reason is simple: A delay pedal not only gives your sound a professional sheen and adds a three-dimensional quality—even when set for a discreet, atmospheric effect—but it can also produce a wide variety of not-so-subtle sounds and textures, ranging from ear-twisting rhythmic repeats (à la Eddie Van Halen’s “Cathedral”) to faux twin-guitar harmonies and live looping.
Footswitches allow for handsfree control of your multi-effects pedal, so having more of them is good, as long as you're OK with the added bulk and weight that they require. Some processors have a stompbox mode feature that lets you utilize footswitches much like a traditional pedalboard, but most of the time the switches serve as preset selectors, along with other secondary uses.
The MOD Reverb Tanks are high quality upgrade units. Some of the major differences between the MODs and other reverb tanks are that the transducers are wired directly to their respective RCA jacks as opposed to current production tanks where transducers are connected by a detachable plug to their respective RCA jacks. This makes the tanks less receptive to any outside interference. The original Hammond, Accutronics and Gibbs tanks from the 1960s were also wired directly to their respective RCA jacks. In addition very close attention has been paid to the spacing and size of the lamination of the Transducers resulting in a more vintage like tone.

If you have any comments about what you see in this web site,  we would love to hear from you.  Our E-Mail address is below.  Of course we are particularly anxious to talk to you about our repair services or our handcrafted guitars.  But  --  don't let that limit you.  We would love to hear your ideas about any guitar related topic.  (One such e-mail led to the harp guitar project)   We WILL respond, generally quite soon.    If you have a question that you would like to see addressed in our Q& A page, let us know.  Our E-Mail Address is: hoffmanguitars@qwestoffice.net
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
Zen guitar is not about scales and memorizing chords. Instead, it is a masterpiece of why to play guitar, helping you get through the times where learning guitar gets frustrating, and believe me, it will at some point get frustrating. But if you can get through that and push on, you’ll be rewarded with mastery of an instrument that will give you personal fulfillment and a lifetime hobby that brings achievement and satisfaction.

History: Before solid-state technology, Valve amps were manually assembled by large teams of women in conditions that would not be accepted today. For domestic application the majority were not well made. Before manufacture, designs were scrutinised and modified to reduce production cost. Valve count kept to minimum, cheapest components used at voltage rating limits, safety standards almost non-existent.
The highly resonant basswood body offers a warm tonality which is ideal for the metal fans whilst the high output Schecter Diamond Plus pickups provide everything from crystal cleans to bone crushing riffage when you throw some distortion on your amplifier. Tune-O-Matic bridge with string through body ensures your notes reverberate a lot longer than regular bridges, so those big solos and riffs really stand out. The bolt on maple neck with 24 X-jumbo frets make it an extremely comfortable guitar to play and highly reliable. Ideal for beginners and pros alike.
SSO Strings (Sonatina Symphonic Orchestra) is a creative commons licensed library. For violin, chamber strings and flute I have taken several of the instrument samples and layered them together to allow for expressive playing over the velocity range. Flute SSO for example contains soft, hard and overblown samples from SSO. To create chamber strings I have used bass strings, cello, expressive violin and viola over certain ranges of the keyboard.

Overdrive, and its noisier cousin distortion, are effects used to ‘push’ your guitar’s signal before it reachers your amplifier. Most amplifiers have some degree of drive capability built into them so you’re most likely familiar with what they sound like. Overdrive is what pushes a clean sound to break up slightly, giving it a warmer, thicker sound. This is perfect for blues and rock playing. It also serves to add more sustain to your playing, meaning notes ring out for longer. In addition to giving a noticeable boost to your volume. Distortion is effectively a more extreme version of overdrive, in that it takes the signal you’re feeding it and makes it all degrees of nasty. You’ll typically hear distortion used in heavier guitar styles like metal and punk. Here, a liberal dollop of dirt is required to give the sound its thicker characteristic.
It usually has 8 terminals – two poles with 4 terminals each. Each pole has one common terminal and 3 switched. The first thing you want to figure out is which terminal is common. Note that terminal on the left is connected to the lever all the time – that’s our common terminal. The other three terminals are connected to the lever only in certain switch positions. Represented as a schematic, each pole would look like this.
Hawaii was key in the development of the electric guitar. There was a giant Hawaiian craze in the 1910s and 1920s, with a rise in popularity of the island’s sounds and culture (as often seen in movies and Broadway performances). Integral to Hawaiian music is the Hawaiian-style steel guitar, which most of early electric guitar development modeled itself after.
If, like me, you're a complete and utter sucker for watching musicians strip their songs down to the barest essentials and perform them with minimal accompaniment, then you're going to lose your mind over the stripped down, guitar version of "Wildest Dreams" that Taylor Swift has just dropped from her acoustic session at the Grammy Museum Sessions last year. Performing the hopelessly dreamy song with just her voice and her electric guitar, the performance is jaw droppingly good and the song honestly sounds even better than it does on the studio track from 1989.
Each brand has its own distinctions, benefits, drawbacks, and niche which it appeals to. Most guitar players are loyal to one particular brand for one reason or another. Even the style and image associated with the instrument comes into play heavily, here. For example, consider the image cultivated by Jimi Hendrix and his Fender Stratocaster. Not only did he expand the realm of tones that everyone thought the guitar was capable of, he made this particular model his own. It’s an iconic guitar that will always be associated with Hendrix and the blues.
The very first production electric guitar was the Stromberg Electro, developed by Hank Kuhrmeyer and introduced in 1928. It was pretty much a kludge. It was an acoustic guitar with a magnetic pickup fitted to the soundboard... Stromberg/Kay Instruments made a resonator version of this, too. The weight of the pickup, though, destroyed the guitar's soundboard over time.
When you first start out playing electric guitar, it goes without saying that it all begins with a guitar and an amplifier. Those are the two most basic parts of your setup, and they’re all you need for learning the fundamentals. Once you have a grasp of your foundation, though, you’re probably wondering how professional guitarists manage to get so many different sounds out of their instruments. Effects pedals are the answer to that question.
I have the Epi SG400. It is very playable, and I think the stock PUP's are fine. It is a very versatile guitar. The only thing about the SG is it has a heavy neck. I mean strap one on, and that long neck just tugs down on my left shoulder. I actually tried to sell mine a while back just because of the heavy neck. I added a strap bolt to the top of the horn thing, or whatever you call it, and that helped. Some like the SG310 which is cheaper, but it has a bolt neck, and I think that will translate into an even heavier neck. Rhonda makes some SG clones as well. My only advice would be try straping one around your neck before you buy if you can.
The question here is how high to make the bridge. Well, this is personal choice. Find somewhere were the string doesn’t buzz on any fret from being too low, but low enough that you can play up and down the neck easily. There’s usually a sweet spot where you can just start to detect some buzzing and you can leave it just a tiny bit higher than that. Now do the exact same procedure for the high (thin) E string end of the bridge. Play the guitar a little bit to see if any of the other strings are buzzing. If, say, the A string is still buzzing, then raise up the end of the bridge nearest to that string a little bit ( a small amount of buzzing is often OK as long as it doesn't bother you too much and isn't heard through the amplifier - this a bit of a personal choice thing). OK, that’s step 2 finished. Your guitar should be nice and playable now. However, it may not seem to stay in tune very well. That’s because the intonation might be off.  
Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]
{ "thumbImageID": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "defaultDisplayName": "Ibanez AEG10NII Nylon String Cutaway Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51351266816534", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black-1351266816534.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Black/H90907000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Tangerine", "sku": "sku:site51351266816747", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine-1351266816747.gc", "skuImageId": "AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEG10NII-Nylon-String-Cutaway-Acoustic-Electric-Guitar-Tangerine/H90907000002000-00-60x60.jpg", "imgAlt": "" } ] }
Chorus pedals can provide a nice subtle doubling effect to the guitar or an extreme “watery” effect when maximized. Famous tunes that use chorus is “Come As You Are” (1991) by Nirvana, and “Brass in Pocket” (1979) by The Pretenders. But basically almost any clean guitar sound in the 80’s had some chorus on it! Certain effects are timeless such as overdrive, reverb and delay. Other effects like chorus can evoke certain time periods such as the 80’s so that is something to keep in mind when using an effect.
they're both excellent guitars, and for jazz-only, and a little more money, the eastman was a little better. it had a bit more acoustic volume and sounded really killer plugged in. but, the godin is the one i ended up keeping. really, really versatile guitar. the tone knob has a wide range of usable tones. really a very articulate sounding guitar plugged in, especially with the tone a little more open. i play a lot of straight ahead jazz on it, and am very happy with the sound. i have always played it with 12 gague strings on it. again, it's not terribly loud unplugged, but the sound is great, and this is designed primarily to be used plugged in.

Which brings us to this 1985 DT-250. While it sports the tail notch, the shape is a little more sleek and diminutive than the comparable Dean ML. The lower front bout is extended to be almost symmetrical with the diagonally opposite bass wing. The treble-side lower bout is shortened, giving the whole guitar a tasteful offset-X shape… X Series. To add dimension to the shape, Fuji Gen Gakki added “crystal cuts” to the edges, basically code for angled bevels.


Here, the brighter/lower-value cap is engaged when the pot’s all the way up. As you roll it back, the larger cap is introduced, producing greater capacitance and a deeper treble cut. When you arrange caps in parallel, their total capacitance is the sum of their values. For example, I tried a .0047µF cap and a .047µF, so the minimum value is .0047µF (a very modest cut) and the maximum is approximately .052µF (a very dark tone).
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","reportSuiteIds":"wwbwprod","eVar3":"shop","prop2":"[wwbw] shop: guitars: guitar value packages","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[wwbw] shop: guitars","prop17":"sort by","evar51":"united states","prop10":"category","prop11":"electric guitar value packages","prop5":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop6":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop3":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop4":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","campaign":"directsourcecodewb","channel":"[wwbw] shop","linkInternalFilters":"javascript:,wwbw.com","prop7":"[wwbw] sub category2"}
UPDATE 10/21: The good news first - I'm still absolutely loving the game and steadily improving. I'm only able to play about one to two hours a day, but even though that's all the time I'm able to put in, I'm already to the point of being able to play along with a song. But (here comes the downside), with my improvement audio lag has become a real issue. Before I was so horrible that I couldn't hit the right notes at all, let alone on time, so it didn't make much difference. But now that I've improved, it's a problem. To be fair, they warn you about this in the form of a pamphlet inside the game box, so it wasn't out of nowhere. I was just hoping that since I wasn't using HDMI, the lag wouldn't be too horrible. Wrong.

Regardless of the invention debate, it is clear that former radio repairman Leo Fender was the first to mass-produce and sell a successful solid-body Spanish-style electric guitar. His company’s simply constructed 1950 Fender Broadcaster (renamed Telecaster as the result of a trademark dispute), with its flat body and a neck bolted onto it, was initially derided by competitors as too simple and lacking in craftsmanship. Gibson’s president Ted McCarty dismissed it as a “plank guitar.” Yet everything about its patented, practical design was optimal for mass-producing an inexpensive solid-body guitar, earning Fender the moniker “the Henry Ford of the electric guitar.”
For instance, the guitars that have a solid body are the most numerous out there. These models are as sturdy as they come, but they do not offer one plenty of resonance and sustainability. If you are interested in a design that mimics the figure of acoustic units, then you should pay attention to those guitars that have a hollow body. These products are able to deliver plenty of resonance, but they might not be of great help when it comes to feedback.

as cool as it sounds to say that robert johnson has influenced everyone since him, directly or indirectly, is just nonsense. sure he was a legend in his own right; but a lot of that has to do with his life being shrouded in mystery. yes, he has influenced some players, way back when, but there were so many more players influenced by electric blues; chicago and texas blues, not delta blues. i understand he was somewhat of an innovator, and that is very important, but i think so called ‘music critics’ have over-blown it a bit in the reverence department for fear of being labeled un-hip. dave marsh, the ‘rolling stone’ critic is a perfect example. he claims johnson as one of the most gifted players of all time. but he dislikes david lee roth, singer in ‘van halen’, so right away edward van halen, guitarist in that group is marginalized with: “the basic 12 bar-blues on the louie-louie thump theme” to describe his playing. lol. to sum it up, whenever a critic uses the phrase ’12 bar blues’, you can pretty much assume he has no clue about what he talking about….best wishes.
Description: Body: Maple & Poplar & Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple & Poplar & Maple - Neck Attachment: Glued - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Cream - Frets: 22 - Inlay: Pearloid block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ABR-1 - Cutaway: Double - Hardware: 2x Volume Control, 2x Tone Control, Grover Tuners - Pickups: Burstbucker 1/Burstbucker 2 - Pickup Configuration: H-H - String Instrument Finish: Faded Cherry - String Instrument Accessories: Hardshell Case, Certificate of Authenticity - Made In: America

The best thing about the guitar is the design and usability is perfect for the beginners, who have an idea that how to play the guitar. It also comes with a bunch of instructions that makes it even easier to use. Once you learn the basics and master it you can easily upgrade to a higher level guitar. It can give the right feel that required from a guitar.
I doubt I can bring anything relevant to this discussion that hasn't been said already but since I liked the article so much and the subject has puzzled me since I got my first guitar, I jsut have to pitch in. My first guitar was a cheap Jackson-esque strat the brand was Cyclone. It was significantly lighter in weight than my friends Fender stratocaster and I liked it for that reason from the beginning. It was just much easier and more comfortable to play, esepecially while standing. Maybe because of this I've been biased to doubt the whole tonewood thing. My experience is that most 'guitar people' (at least here in Finland) seem to think that lighter wood is simply a sign of a bad quality electric guitar. I talked about this quite recently with a local luthier, who is very sience oriented and uses rosewood as the body. Guitars he makes are so light that when you pick them up at first, it is hard to believe they aren't hollow. So I asked him about his thoughts on the density and / or other qualities of the wood affecting the tone and his responce was pretty much consistent with the article. Anyhow he did mention the _theoretial_ possibility of the waves to traveling to the wood and reflecting back to the strings _possibly_ affecting the sustain. As someone stated, in real life physics there are never completely isolated phenomena but you can draw a line whether a factor is significant or not. John's comment above would support the more dense wood to be better but my guess is that when it comes to the sound that is audible to human ear, the material does not count. How a guitar feels is a totally different matter and shapes the way the player hears the sound drastically. My intuition says that lighter wood might convey the vibration to the players body which would partly exlpain Butch's experience with guitars with different materials. I've never thought about that before but do find anything else than the strings resonating (springs, screws..) uncomfprtable.
The Korg Kaoss Pad is a small touchpad MIDI controller, sampler, and effects processor for audio and musical instruments, made by Korg. The Kaoss Pad's touchpad can be used to control its internal effects engine, which can be applied to a line-in signal or to samples recorded from the line-in. Effects types include pitch shifting, distortion, filtering, wah-wah, tremolo, flanging, delay, reverberation, auto-panning, gating, phasing, and ring modulation. The Kaoss Pad can also be used as a MIDI controller.
Buddy Guy: ash body with a V-shaped maple neck featuring a 22-fret fretboard, three Lace Sensor “Gold” single-coil pickups and a 25dB active midrange boost circuit (USA, discontinued as of 2010), alder body with a V-shaped maple neck featuring a 21-fret fretboard and three standardalnico single-coil pickups (Mexico). Available in a variety of finishes, including black with white polka dots (Mexican Artist Standard), 2-color sunburst and honey blonde transparent (USA Artist).
Among the popular performers of Hawaiian (and most other types of) music on the Vaudeville music hall circuit was Roy Smeck (1900-1994). Smeck was a talented instrumentalist who played guitar, banjo, ukulele, and lap steel guitar, earning the sobriquet “Wizard of the Strings.” Smeck made quite a few recordings and starred in part of the first “sound on disk” movie that was released in 1926. Like many other performers, Smeck endorsed a number of instruments by various manufacturers over the years, but is probably best known for the line of Harmonies introduced in 1927 with the pear-shaped Vita-Uke. Smeck’s name would be associated with Harmony instruments until near the end of the company’s run in 1973.
Sturdily constructed with a solid basswood body, bolted maple neck and rosewood fretboard, this black electric guitar has an attractive glossy finish. The list of add-ons include a high quality Hollinger BC-08 practice Amplifier (10 Amp), string-winder cable, strap, gig bag and pitch-pipe picks. The intonation as well as playability of the Davison full size electric guitar has been enhanced owing to its single, high quality humbucker pickup, chrome bridge system and diecast tuners. Last but not the least, the practice amp is suitably equipped with a headphones jack for noise-free practice sessions, as well as an overdrive mode for cool distortions!
{ "name": "Brown", "skuUrl": "/El-Dorado/Vintage-Leather-Guitar-Strap-Brown-1274228084717.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-16-2018", "price": 85.00, "isOnSale": false, "msrp": 85.00, "salePrice": 85.00, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $4 back in rewards Valid through,85.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "85", "decimalValue": "00", "listPrice": 85.00, "isPriceDrop": false, "priceDropPrice": "", "promos":["freeShipping","international","return"], "warranty": false, "sku": "site51274228084717", "shipToStore": true, "displaySku": "361091000008000", "displayId": "1274228084717", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361091000008000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Vintage-Leather-Guitar-Strap-Brown/361091000008000-00-140x140.jpg", "styleImgAlt": "Vintage Leather Guitar Strap Brown", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"41079093650", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
EQ pedals do exactly what you would think.  They allow you to set the tone of your sound through equalization.  Just like on your radio, they can adjust the bass, mid, and treble frequencies of your tone.  Depending on the type of EQ stompbox you have, you may have different ways of tailoring your tone.  There are two main types: graphic and parametric.
Interesting cosmetics and great playing 4-string, Factory, but "custom re-built" Fretless bass. Appears to be re-finished. I had to buy this, as I recognized it immediately as a great "player", fretless bass. Adjustable P-J passive / dynamic pickup configuration sounds great. Separate volume and tone controls. Appears to be a "re-finish", in interesting "Fleck-Tone" gray paint. We think it is not the original finish, but it could be original. Someone did an incredible job it if is a re-fin, as the routed edges are perfectly finished and all parts had to have been removed with room made for the extra finish thickness. No worries about finger prints with this one. Un-bound, graphite? or other synthetic material, ebony black fingerboard  w/ dot inlay side markers on a solid mahogany neck with a 4-bolt neck joint. Black anodized tail piece perfect and rust-free. Finger board near new condition. Features 4 high quality, "sealed" tuning machines that work perfectly and hold tune. Plays and sounds great! Lots of fun. We have completely done a "Pro" set up on the guitar, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body), adjusting / checking the intonation (adjusted perfectly!). 34.5" scale length. Plays and sounds great. We also installed a new set of .040 "Round-wound" strings (yes I know flat wounds are more correct for fretless, but I prefer a bit more brightness. You are free to install flats once you own it). No case or bag included.
While other Univox brand amps may have existed during this period, these are the only ones on our radar scope. The brand was still being put on amps as late as 1976, and all of the later amps were still in a 1980 binder, though by ’79 only two Univox amps were listed in the price list. Most likely, when the Univox guitars went away in ’77 or ’78, so did the Univox amps, but supplies probably continued to be available as late as 1980. Anyhow, this sets the stage for the next development in amps to which we’ll come back…

top 5...Top 5!...I had recently bought a gaming console after not owning one since the ps2 so not the biggest gamer but getting into it again has been fun when there free time to waste ha overall it's a pretty good game haven't stopped playing it just need to finish it up to continue the side story...What I'm disappointed is with the actual story of the game, which for me was very predictable and disappointing...I don't get how this game gets so many appraisal which for me is a good game for sure...but far, far, far away from one of the best games ever made as many say.
Spruce has historically been the wood of choice for acoustic flat-top guitar soundboards. However, Luthiers and other large guitar manufacturers very often choose more economical and readily available woods rather than top-quality spruce. Redwoods and cedar, for instance, are often used in soundboards by American guitar-makers to great effect. In some cases, two different woods are used together to give the guitar a distinctive appearance and tone.
Thanks. It sounds good without tone shaping ability but I wanted to hear the original sounds. It now has 2 capacitors tied together from the volume pot to 1 tone leg. I am guessing the original tone switch was wired with one cap. for the low & one cap. for middle and the 3rd tone leg was straight wired for treble high. I also wonder how the ground sweep worked on the tone selector?? I just need to know. I’m a DIY guy.
:::I just bought one of these guitars at an auction. In Oregon U.S.A. It is a plank, with sunburst finish, 3 chrome toaster style pickups with one cover missing. The varnish has cracks in it like every other old Vox I have seen that date to the sixties or earlier. It has a white pick guard with 3 chrome knurled knobs and an old style switch that turns (not a flip switch) but is missing the knob that I assume is chrome like the 3 volume knobs. I haven't put strings on the guitar yet so I don't know if they are all volume or 1 volume and 2 tone. The roller/tremolo has VOX stamped in big letters and under that it says PAT.APP.FOR in smaller capitol letters. It has a plastic cover plate on the back that is stamped, Made In England. The neck is 19 fret with a fret just under the nut that has no use, as the string would never touch it and the neck is attached with a metal plate. Tuners are a single strap with gears steel not brass with plastic knobs. Just under the tuners on the back the headstock are the numbers 64523. A green VOX decal along with Shadow JMI Dartford Kent on the front. I was suprised to find this guitar, as I had never seen or heard of it before. I can't wait to play it and see how it stacks up to all the other VOX guitars I have and have played. Wish I could find out more about it but this is as close as I have come, so far.

In fact, it’s the same hand-fabricated bobbin, Alnico II bar magnets and plain enamel mag wire that featured on the original. And with a similar construction comes a similar vintage P-90 tone, with plenty of brightness and bite. Available in both bridge and neck models, the Antiquities look the part too, with authentic-looking aged black plastic dog-ear covers.
After years of analogue delay companies decided that it was not clean or accurate enough. So they came up with a much sturdier design with digital delay chips.Not only can these get the timing down perfectly every time but they can also cover a wider range of delay options. Depending on the chip inside you can easily get multiple seconds of delay time in a single pedal.The main downside to these is that they can sound a bit clinical and too clean. Manufacturers have battled this by adding in different modulation options on delays like this to give it more character. If you want a delay for every possible scenario digital might just be the way to go.
Named using Jim Marshall’s initials and numbers from his car's license plate, the Marshall JCM800 debuted in 1981. With the newly introduced Master Volume feature, the JCM800 allowed for crunchy, sizzling distortion at low output levels, making it the amplifier of choice for heaps of hard rock and metal players, including Slayer’s Kerry King and Jeff Hanneman and Slash of Guns N’ Roses. The JCM800’s popularity carried on beyond the Eighties, becoming a favorite of Fugazi’s Ian Mackaye and Tom Morello of Rage Against the Machine.
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
The good people at Cordoba, therefore, sought to make a Spanish-style guitar with the traditional sound of a Spanish guitar, but the slimmer body and slightly narrower neck of a steel-string. They also added in a Fishman-Presys module for switching the guitar from an acoustic sound to an electric (including a built-in tuner), hence the “Fusion” in the model name.

Here, Rocksmith has a major challenge: It must provide considerably more information onscreen than competitors like Guitar Hero and Rock Band. Those games got off easy—they only needed to relay which of the colored "frets" to play. Because Rocksmith is teaching you to play a real guitar, it has to tell you which fret and which string to play simultaneously. That requires a more complicated visual setup.
Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
Another famous guitar shape, although we’d wager on account of it being many players’ ‘first’ guitar. We’ve all seen them. The nylon-strung small scale acoustics which many of us gain access to at an early age. The, as you progress, you learn that these particular guitars aren’t sent to test our commitment to the cause, but that in the right hands these can be amazingly intricate, highly technical instruments which have a wonderful sound and genre all of their own.
The AF75 also has an ART-1 bridge and a VT60 tailpiece for increased resonance, improved tuning stability, greater sustain and an enhanced tone. It is also equipped with Classic Elite humbucking pickups at the neck and bridge, producing a rich and nuanced tone with just the right low-end heft. Tone shaping is an easy affair with the Sure Grip III control knobs, which are designed for non-slip, precise control.
These guitars use very cheap materials. I bought a washburn WM24v PROE for $300 and it come with Mahogany body & neck, phenolic fretboard, emg81/85 and original floyd rose... Ibanez RG costs $400 and comes with basswood body, bolt on maple neck, rosewood fingerboard, shoddy pickups and a licensed floyd that WILL NOT stay in tune. Poor quality for money, if you get a Ibanez go for a fixed bridge/string-thru because their trems are HORRIBLE! Original floyd is the only way to go!
I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.

{"pageName":"[gc] vintage: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
When looking to buy a guitar, you want to make sure that you’re picking a model that is right for your skill level, playing style, and needs, all that while ensuring that you don’t overspend. If you’re just starting out, there’s probably no need to spend a couple grand on a flashy model when one of the quality cheap acoustic electric guitars will do.
This is normally when I tell you about a crowdfunding campaign, but there isn't one currently running for this device, so if you're interested in getting a ToneWood-Amp when it's launched, sign up at their website to register for pre-ordering. There is no commitment to buy one for signing up, but if you sign up now, you can then order one at half-price ($90) when the pre-order campaign goes live (mid-October).
A spring reverb unit is really a small amplifier in itself, that sends the guitar signal through a tube circuit to a small output transformer (or through a transistorized circuit) and from there to one end of the springs in a spring can rather than to a speaker. This signal vibrates the springs, is picked up by a transducer at their opposite end, and from there is blended back with the dry signal by degrees determined by a “depth” control, and sent on to the output (or the power tubes, if part of a guitar amp). As you can image, it’s a bulky effect when achieved in this way, requiring at least a couple of transformers, two or three tube sockets and a spring can, but the circuit itself is fairly simple.

For an experienced guitarist, the choice of amplifier is personal and a major part of the guitarist’s sound. But most of our panelists thought that, for a beginner, it’s most important for an amp to offer a variety of good sounds so that they can find what works for them and make adjustments as their style and taste evolve. As Ken Rosser put it, “If a kid’s starting out and they’re really into Pantera, they’ll love an amp that gives them that sound, but next year they might discover Eric Clapton and want a different sound.”
I agree with Squank, and I appreciate the compliment! We live in a golden age of guitar gear and I’m in the lucky position of getting to play through quite a bit of it. It’s rare that I come across an amp, pedal, or other piece of guitar hardware I truly dislike, and I can usually get a decent, useable tone out of most modern equipment. This month, I’ll share some of my thoughts on dialing in great tone on amps, pedals, and guitars.
7 String 8 String Accessories Acoustic / Electric Guitar Acoustic Guitar Alvarez Amplifier Bass Guitar Blackjack Celebrity Classical Guitar Combo Amp D'Addario DN-2411 Dreadnought ebony Effects Electric Guitar Epiphone Fender Floyd Rose Gigbag Guitar Strap Hard Shell Case Hellraiser Ibanez Jackson Larrivee Les Paul Levy's Leathers Maple Lake New Ovation Refurbished Schecter Schecter Guitar Research Signature Solid Body Solid Top Strings Tacoma Takamine USA Used Wechter
The Wah Wah pedal is one of the coolest guitar effects ever. Released in 1967 as the Vox Clyde McCoy. Oddly enough Clyde McCoy was a trumpet player as the pedal was to be used when amplifying the horn. Fortunately guitarists picked up on the almighty wah. The name Cry Baby has become de facto for the wah as it became the most popular. A wah is basically an active tone control that boosts lower frequencies through higher ones by using the sweep of the pedal. A guitar’s tone knob is passive and just rolls off high end, the wah electronically boosts frequencies.
German tonemeister and Vintage endorsee, the one and only Thomas Blug arrives in the UK for a promotional tour this weekend. Following an appearance at Northern Guitar Shows London International Guitar Show at Kempton Park Racecourse on Sunday, Thomas will perform the following in-store clinics to launch the brand new BluGuitar AMP1 Mercury Edition.
In 2013, Gibson introduced the Government Series of Les Paul, SG, Flying V, Explorer and ES-335 guitars which were constructed solely of tonewood the US government seized but later returned to Gibson after the resolution of the company's Lacey Act violation in 2011. The guitars were finished in "government grey" and also featured decorations which intended to draw attention to the issue of government. A year later in 2014, Gibson released the Government Series II[77] of guitars, which were essentially the same as the first series, only finished in a new color: "government tan".
There is a beauty to the guitar-cable-amp approach. It doesn’t get any easier, unless you take up playing the flute. And the lack of toys to mess with will certainly make you focus on playing more. By changing your pick attack, vibrato, or the volume and tone controls on your guitar—you’ll rely on your hands instead of stepping on a box to change tones. I believe it’s beneficial for all of us to just plug straight in at least once in awhile and rock out with unadulterated tone.
The positions (that is where on the fretboard the first finger of the left hand is placed) are also not systematically indicated, but when they are (mostly in the case of the execution of barrés) these are indicated with Roman numerals from the first position I (index finger of the left hand placed on the 1st fret: F-B flat-E flat-A flat-C-F) to the twelfth position XII (the index finger of the left hand placed on the 12th fret: E-A-D-G-B-E; the 12th fret is placed where the body begins) or even higher up to position XIX (the classical guitar most often having 19 frets, with the 19th fret being most often split and not being usable to fret the 3rd and 4th strings).

You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.


Tremolo: A tremolo effect produces a slight, rapid variation in the volume of a note or chord. The "tremolo effect" should not be confused with the misleadingly-named "tremolo bar", a device on a guitar bridge that creates a vibrato or "pitch-bending" effect. In transistorized effects, a tremolo is produced by mixing an instrument's audio signal with a sub-audible carrier wave in such a way that generates amplitude variations in the sound wave.[80][81] Tremolo effects are built-in effects in some vintage guitar amplifiers. The guitar intro in the Rolling Stones' "Gimme Shelter" features a tremolo effect.[82]
After covering the Top 5 Guitar Plugins You Need To Know and 5 Best Multi Effects for Beginner Guitar Players and 5 Guitar Stomp Box Pedals Every Guitarist Needs let’s face it: probably half of our sound comes from our amplifiers. That makes them kind of important… and with so many little things to consider, from size and reliability to power output and built-in effects, you might appreciate some suggestions. So without further ado, here are my Top 10 recommendations (in no particular order) for beginner Guitar Amps to get you started.

Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.


This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.
Early electrics weren’t built for distortion. The idea was to create a loud, clean sound and, with a few notable exceptions, that’s what players who utilize this type of guitar are looking for today. But even without overdrive this design has one inherent problem: As the volume goes up, hollow-body guitars become highly susceptible to feedback. The next level of electric guitar evolution, the semi-hollow body, made a few strides in dealing with this issue.
You are bidding on a previously owned and in good working condition Blackstar Amplification HT Studio 20H guitar amp head. This auction is for the amp and power cable you see pictured. No footswitch is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. This unit has some scuffs and dings from being moved around. It has been tested and is in good working condition.
When I was a kid in the 60s, all of the Japanese brands (probably ALL made by Teisco) had a really bad rap and only kids ended up with them. Some were very cheaply made, with weak metal, thin chrome plating, funky finishes and thin pickups. I owned a Rodeo, which was terrible. But then, who knew much about guitars then? Nowdays, anything has character.
UPDATE 10/21: The good news first - I'm still absolutely loving the game and steadily improving. I'm only able to play about one to two hours a day, but even though that's all the time I'm able to put in, I'm already to the point of being able to play along with a song. But (here comes the downside), with my improvement audio lag has become a real issue. Before I was so horrible that I couldn't hit the right notes at all, let alone on time, so it didn't make much difference. But now that I've improved, it's a problem. To be fair, they warn you about this in the form of a pamphlet inside the game box, so it wasn't out of nowhere. I was just hoping that since I wasn't using HDMI, the lag wouldn't be too horrible. Wrong.
Though not much is known about the production of the Hi-Flier after about 1977, it clearly came to an end — and clearly has had an impact on players in the vintage market. Used by guitarists like Cobain and Lee Ranaldo of Sonic Youth, as well as many others in a variety of bands, the Hi-Flier gained notoriety as a unique guitar with a sound as striking as its looks.

While high action is a concern, I see more people on guitar forums who bought Authentics, including the 1941, who say the action and playability is “like butter” more than I see people mentioning high action being a problem. Also, a lot of players rarely go beyond the fifth fret without a capo, so they may not even notice if their 10th fret would seem high to some players.


A very good option in the budget pedal market. Comes with a great number of effects to combine for solid sounds. Virtually all the factory pre-sets are worthless and are sort of demonstrations of what the pedal can do. But you have plenty of user saves and setting up good tones is straight forward and simple. The tuner in this and my handheld one never agree. Someone is lying!
The guitar offers a beginner some great features in sound and playability. For starters, it is technically a Les Paul (giving you a great “cool factor,” which is important when you’re first starting out). It cuts a couple corners that a Standard or Special Les Paul won’t, like the fact that it’s a bolt-on neck, and there are proprietary single coil pickups (as opposed to the standard humbuckers you’ll usually find in a Les Paul).
{"eVar4":"shop: pro audio","eVar5":"shop: pro audio: signal processors","pageName":"[gc] shop: pro audio: signal processors: multi effects processors","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: pro audio: signal processors","prop1":"[gc] shop: pro audio","evar51":"default: united states","prop10":"category","prop11":"multi effects processors","prop5":"[gc] shop: pro audio: signal processors: multi effects processors","prop6":"[gc] shop: pro audio: signal processors: multi effects processors","prop3":"[gc] shop: pro audio: signal processors: multi effects processors","prop4":"[gc] shop: pro audio: signal processors: multi effects processors","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}
The Ovation Guitar Company founded by Charles Kaman based in the USA. The company primarily manufactures nylon-string acoustic guitars & steel-string acoustic guitars.These are the kind of electric guitars that are ideal for a recording in a studio and also great for stage performance. Their design incorporates, a wood top with a rounded, synthetic bowl shape instead of the traditional back and sides. CE44-RR is one of the most popular series of acoustic guitars produced by this brand. This is an expensive brand of guitars whose starting price is 31,555 INR approximately.
Interestingly, the 2019 version of this guitar doesn't stray too far from the more expensive Standard model in terms of looks - some even prefer it over more expensive models because of its streamlined appearance. While there are no high grade tonewoods involved, the Les Paul Tribute still uses the same mahogany body and maple top combination. The 24.75" scale length neck also follows after the Standard model, complete with a 22-fret rosewood fretboard and a 1.695" nut width. As the name suggests, this model features a slim taper neck profile that modern players will appreciate. Finally, it is equipped with a 490R humbucker for the neck and a 490T humbucker for the bridge, which reproduces the sound of old Les Pauls from the '60s.
The Ibanez Artcore AS53 is a semi hollow-body guitar created for guitar players from diverse genres as blues, country, rock and jazz. The guitar feels nice and has a compact and comfortable body. The tone is rich, warm and full. If you are looking for that fat hollow body sound, this guitar makes it possible to switch from jazz to every semi-hollow rocking style of music. A combination of quality and affordability.
The BOSS ME-80 multi effects pedal is an excellent entry point into effects as it contains just about every type of effect you can think of. The ME-80 allows you to chain eight effect groups together in one patch with 36 preset patches allowing you to seamlessly switch from rock to funk to jazz at the push of a footswitch. There are also 36 user patches so you can create your own tone.
JAZZ :Al Di Meola , John McLaughlin ,Wes Montgomery ,Pat Metheny ,John Scofield,Django Reinhardt ,Larry carlton ,Joe Pass,Herb Ellis ,Eddie Lang , and again I still have in mind at least 10 more jazz guitar players that jazz is the hardest and more complex guitar composition and it is an awesome style or kind of music to play just because not everybody play can play jazz.

Pickups convert the mechanical energy of a vibrating string to an electrical signal, allowing it to be amplified, processed and reproduced.[1] Pickups vary greatly in construction, size, types of materials used, as well as various electrical properties, but are generally divided into two categories – single-coil and double-coil (also known as humbucker).[2]
If you're in a small, unsigned band, it's very important to choose an amp that's loud enough - as not every venue will mic your amp. Ironically, bigger artists don't need to worry about this, since they are safe in the knowledge they'll always have a good sound and their amps will always be mic'ed. That's why Seasick Steve plays a small Roland Cube amp, but it's not necessarily a great choice if you're in a band who plays live.

We are your Vintage Pickup specialists.   We have cornered the market of manufacturing the most accurate vintage pickup reproductions to which can not be equaled.  Our process is to chemically analyze an original pickup magnets and wire, then we reproduce them with the exact same magnets and wire.  We don't use stock magnets or wire.   We don't degauss magnets and say they are vintage.  Our magnets are only as strong as the elemental composition will hold.  Our wire is specially manufactured for us, we have many batches of wire with all different types of resistances and O.D.'s.  Our wire also is processed differently than modern conventional wire, these little details are what makes the Klein Pickups Reproductions the most accurate in the world.   We have a full array of models that we reproduce.  Check out our site for the full list of all of our offerings.   As a small business we always appreciate your business & support.  -Thanks
The amp and cabinet modeling is probably the weakest link of the Zoom G3X. Make no mistake - it’s nice to have customizable amp and cabinet pairings in a practice or headphones scenario, or if you simply don’t have a guitar amp yet. It’s just difficult to replicate the character and “oomph” of a vintage tube amp. This isn’t so much a knock on the G3X as it is of most amplifier modeling.

TASTING NOTES: A straight-on mic always provides the strongest impact and widest frequency range. An angled mic can soften a speaker’s harsh edge while adding interesting texture. In a multi-speaker cabinet, the off-axis mic tends to pick up more sound from the non-miked speakers, adding additional texture via phase cancellation. And while you only hear two mic positions here (straight on and angled), there are multiple off-axis options, from a barely off-center mic to one pointed toward the speaker’s outermost edge. Aim at the center for maximum punch and intensity. Aim toward the edge for slightly softer, more nuanced tones.
A humbucker pickup is electrically equivalent to two single-coil pickups wired together in series. Coil splitting involves shorting one of the coils to ground, essentially turning the humbucker into a single-coil pickup (not a perfect replica, though, as the magnetic circuits of the two pickup types are different). This is usually done with a DPDT switch, but can also be done with a push-pull pot. Some manufacturers have used a pot to vary the amount of signal shorted to ground from one coil, thus producing a range of tones between a humbucker and a single-coil. Coil splitting results in a sound that's brighter and has less output than a full humbucker. It also eliminates the humbucker's noise-cancelling properties. This modification requires the start and end of both coils to be exposed, which is more commonly available on aftermarket than stock pickups.[17][18]

The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."
The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
Sure, we could get technical, and think about how the guitar pickups are used to capture the vibration from its strings (usually steel-cored) and convert it to an electric current. Such current is then modeled and altered through speakers and instrument amplifiers; there are several possible effects that can be applied to the audio signal that originates from the vibration of the guitar strings: reberbs, distortion, assorted gimmicks. But that's just the technical side of it, and it barely explains the unique sensations that can be offered by a good electric guitar.
Schecter Hellraiser Hybrid C-8 Electric Guitar, 8-String   New from$1,089.00In Stockor 12 payments of $90.75 Free Ground Shipping Ibanez RGMS8 Multi-Scale Electric Guitar, 8-String   New from$599.99In Stockor 12 payments of $50 Free Ground Shipping ESP LTD Stephen Carpenter SC-608B Baritone Electric Guitar, 8-String (with Case)   New from$1,199.00In Stockor 12 payments of $99.92 FREE 2-DAY SHIPPING Jackson X Series Dinky DKAF8 MS Electric Guitar, 8-String   New from$699.99In Stockor 12 payments of $58.34 FREE 2-DAY SHIPPING See All Electric Guitars: 8-String
So, many engineers add a second mic at the other end of the room, to capture that room ambiance. Put it on a separate track and you can dial it into your overall sound at will. But remember, if you have an acoustically dead room covered with foam tiles, you do not really have a room sound to capture. Stick the amp into a tiled bathroom, that’s a whole different story.

Straight out of the box, you have 6 x enhanced amp voices to choose from ranging from crystal cleans to bone crushing gains to get to grips with as well as 12 x super wide stereo FX effects that you can use to create your ideal sound. The 10 watts pumping out of the 2 x 3” woofers make it a great desktop amp and something to jam along with friends. The amp is ideal for beginners still getting to grips with their sound as you can choose from Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1 and OD and the budget friendly price tag makes it all the more appealing. This software is a free download that functions as an editor/librarian for your Spider tones. In addition, you also get Presonus Studio One DAW bundled with the amp so you can record loops, craft entire songs, change and store patches using the Blackstar INSIDER software. This is not only one of the best cheap amplifiers, it’s also one of the best amps for beginner guitarists who want to get into signwriting too!
Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.
For its tops (soundboards), Ovation used sitka spruce, a wood which Kaman engineers had been using in helicopter blades. In the 1970s, Ovation developed thinner sound-boards with carbon-based composites laminating a thin layer of birch, in its Adamas model, which has been viewed as one of the most radical designs in the history of acoustic guitars. The Adamas model dissipated the sound-hole of the traditional soundboard among 22 small sound-holes in the upper chamber of the guitar, yielding greater volume and further reducing feedback during amplification.[1] The Adamas design strengthened the sound-board, reducing the traditional design’s bracing and hence its weight. In the 1980s, another innovation was the introduction of shallow-bowl guitars, which appealed to electric guitarists.
According to Wikipedia, a grimoire is a magical text that instructs the user “…how to perform magical spells, charms and divination, and how to invoke supernatural entities…” In order to summon your own supernatural creations, this guitar-focused text compiles a vast selection of exercises that will help you connect patterns across the entire guitar neck.
Acoustic amplifiers produce an uncolored, "acoustic" sound when used with acoustic instruments with built-in transducer pickups or microphones. The amplifiers often come with a simple mixer, so that the signals from a pickup and condenser microphone can be blended. Since the early 2000s, it has become increasingly common for acoustic amplifiers to provide a range of digital effects, such as reverb and compression. As well, these amplifiers often contain feedback-suppressing devices, such as notch filters or parametric equalizers.[22]

One of the factors bassists keep in mind when selecting a combo amp or an amp head is the amount of "headroom" that the amplifier will provide them, given their intended performance venue and music genre. "Headroom" refers to the amount by which the signal-handling capabilities of an audio system exceed a designated nominal level.[20] Headroom can be thought of as a safety zone allowing transient audio peaks to exceed the nominal level without damaging the system or the audio signal, e.g., via clipping. In loud music genres and in genres where bassists seek a clean, clear bass tone, bassists seek to avoid power amplifier clipping, so they typically choose amplifiers which provide enough headroom to avoid power amp clipping. Headroom has been defined as a "...safety zone or wiggle room".[21]"[H]aving enough headroom is essential for solid-state equipment like bass amplifiers and power amplifiers. If you lack this, you can expect a harsh mid range tone, a lack of dynamics and possibly blown speakers".[21] Having enough headroom is also important for bassists seeking to retain a "clean" sound even in loud, high-volume performance settings.


Like trapeze tailpieces, top mounted vibrato bridges transfer the string tension to a guitar’s side, offering more natural string resonance. Embedded units like the Vibrolas found on Gibson Flying Vs transmit the tension to the guitar’s body. Through-body units do neither, employing strings to absorb the string tension. Another system, the TransTrem, developed by Steinberger in the ’80s, has locking positions that allows players to transpose their tuning to other keys.
I learnt to play guitar in my late teens, mainly because it was cool and the girls seemed to like hanging out with guitar players. I started off with a couple of weekly lessons with an elderly lady who managed to teach me some basic chords. After that I continued learning from friends because, imagine this, there was no internet at that time and no cool dudes who knew how to teach to play pop and rock guitar. Well, I strummed my acoustic hard and moved into playing folk and some bluegrass and had fun basking with friends on weekends and during school holidays.
To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain, modulation (chorus, flanger, phase shifter) in the middle, and time-based units (delay, echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the guitar’s sound. Some performers use a noise gate or noise suppression pedal at the beginning or end of a chain to reduce unwanted noise and hum.
The Quebec-based Robert Godin decided to create his own music instrument company in 1972. Today, the manufacturer sells its products under different brand names: Norman (entry-level and mid-range acoustic guitars), Art & Lutherie (entry-level guitars), Simon and Patrick (mid-range and high-end guitars), La Patrie (classical guitars), Seagull (entry-level and mid-range acoustic guitars), and Godin for electric guitars. Some models are equipped with a piezo and/or "synth" pickups. The body shape is pretty classic, somewhere between a Les Paul and a Telecaster. Among the most famous Godin players we have John McLaughlin and Leonard Cohen. The brand catalog is sorted in different series: Performance Series, Signature Series, Multiac (acoustic/electric hybrid), Passion Series (high-end instruments), 5th Avenue Series, plus some very original single models like the Glissentar, an acoustic/electric 11-string nylon-string fretless guitar!
Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
We indicate and report to EMS Worldwide Express mail service that the guitar is sent with a lower declared value than the purchased price and as a gift so that there will be a possible exemption on custom clearance fees, taxes or you may need to pay a little amount but it is necessary, or the custom will open the package and revalue the guitar. Based on our experience, the custom fees in the Europe, USA, Canada, Australia and Asia are very minimal since we declared the guitar as a gift and lower purchased price in order to lessen the custom fees or even possible exemption and we have not received complaints from our valued customers regarding custom fees, taxes and tariffs.
The amps are interesting and also pretty much impossible to I.D. These were, of course, tube amps. Their basic cosmetics consist of two-tone tolex or vinyl covering � contrasting dark and light � arranged vertically with a wide band in the middle, just slightly narrower than the grillcloth. Cabinets had rounded edges, and, in fact, sort of look like ’50s TVs. One was a small practice amp, with two medium sized amps about 15″ or so high, and one humongous amp, complete with six 8″ speakers (which looks like the later HG-8).
At the more reasonable end of the price scale compared to other Gretsch guitars, sits the Gretsch G2655T Streamliner. While not an arch top like the guitars listed previously, this guitar does feature a hollow bodied design. As such, it perfect for clear, ringing chords and lead lines. Also in its favour is the G2655T Streamliner’s thinner body depth. This makes it more comfortable and slightly less cumbersome than the bigger, more traditional jazz guitars. You’ll also get more versatility from a ‘regular’ semi acoustic, meaning you can dabble in blues, rock and country with the Streamliner models.

700-Series, which are all solid-bodies are probably worth $250-$350, maybe a little more for the 4-pickup 742 model. I’m pretty sure that they were on the market at the same time as the 800s but not as many are being seen. Since the 800s were a step-up in quality compared to previous Kents and the 700s used similar design features, they should be pretty decent instruments. Although collectors haven't shown a lot of interest in them, rarity has to be considered an influence on the price at this point.Recently a 742 sold on Ebay for over $1000 and a 740 recently sold for $999. Previously most of the 700s had been selling for $200-400.

For players who want an incredible palette of tones for a low entry cost, this is the amp for you. Experiment with 128 tonal presets, or create your own sounds with digital models of over 200 amps, cabs and effects. If you’re into playing different styles of music and you don’t want to invest in different rigs, look to this versatile solid state amp first.


The Canadian firm Godwin is another popular name for producing best quality electric and acoustic guitars. (Have you heard of Seagull acoustic guitars? It’s the same brand.) Godwin outshines among the world of guitars due to producing high-end instruments with surprising variations. They even manage to touch bass too. Not only the Godwin guitars depict quality, but also reflect classiness.
I only dealt with them directly on my SX Mahogany Strat w P90s. For $119 I got a really nice beginner guitar. I added cheap grover tuners, I filed a few frets and polished them, shimmed the neck, sanded (more scuffed really) the sticky finish on the back of the neck, and I've got a nice little beater that sounds awesome (to me at least), and has nice low action. I'm a relative newbie, but got some good experience with guitar setup and didn't risk trashing a expensive guitar.
Here's some net info you may find interesting. Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (They may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. According to an article in Vintage Guitar Magazine, importation of Hagstrom-made Kents began in 1962. Another story is that Hagstrom sold Kent-branded guitars through distributors other than Buegeleisen & Jacobson in the U.S. without permission from J&B and were forced to withdraw them after a short time. By then Hagstrom had become better-known and could sell them under their own name, anyway. At first, the idea was to keep ’em cheap and sell to the beginners and students. Later, as Japanese manufacturers proliferated and competition became hot and heavy, some of them began to copy the Fenders and Gibsons of the time. As quality began to improve, some manufacturers again began issuing thier own designs. One of the “beginners” who got a start with a Kent Polaris I was Bruce Springsteen. Alex Lifeson of Rush got started with a Kent acoustic. One of Gene Simmons first guitars was also a Kent. The BBC series “The Seven Ages of Rock”, episode 2, showed Lou Reed (R.I.P) with the Velvet Underground playing a Kent 532 Copa at Andy Warhol’s hangout. Kent created a vib then and they're still doin it today.

Harmonizers – Commonly used for vocal harmonies, these pedals can do a lot to beef up your sound. You can also use them in creative ways, like Steve Vai and Robert Fripp, who have been known to disable the main signal altogether so that their music is coming only from the pitch-shifted output. Using a modern harmonizer can be as easy as setting it to the key you’re playing in, and many even support more than one harmony at once.
Lolol lame azz I knew if I kept reading your BS comment you would start nameing all your crapy azz guitars haha lol no one cares or gives a flying fuck what you have or own.... (What you must of sounded like when you were 12 and lame as today) Oohhh I'm sooooo cool I have jimi's guitar and eric's guitar cause I'm their nephiew ya there my uncles hmm mm both of them I own and play with there guitars all the time woooo hooooo...............
THE VOTERS: Trey Anastasio, Dan Auerbach (The Black Keys), Brian Bell (Weezer), Ritchie Blackmore (Deep Purple), Carl Broemel (My Morning Jacket), James Burton, Jerry Cantrell (Alice in Chains), Gary Clark Jr., Billy Corgan, Steve Cropper, Dave Davies (The Kinks), Anthony DeCurtis (Contributing editor, Rolling Stone), Tom DeLonge (Blink-182), Rick Derringer, Luther Dickinson (North Mississippi Allstars), Elliot Easton (The Cars), Melissa Etheridge, Don Felder (The Eagles), David Fricke (Senior writer, Rolling Stone), Peter Guralnick (Author), Kirk Hammett (Metallica), Albert Hammond Jr. (The Strokes), Warren Haynes (The Allman Brothers Band), Brian Hiatt (Senior writer, Rolling Stone), David Hidalgo (Los Lobos), Jim James (My Morning Jacket), Lenny Kravitz, Robby Krieger (The Doors), Jon Landau (Manager), Alex Lifeson (Rush), Nils Lofgren (The E Street Band), Mick Mars (Mötley Crüe), Doug Martsch (Built to Spill), J Mascis (Dinosaur Jr.), Brian May, Mike McCready (Pearl Jam), Roger McGuinn (The Byrds), Scotty Moore, Thurston Moore (Sonic Youth), Tom Morello, Dave Mustaine (Megadeth), Brendan O’Brien (Producer), Joe Perry, Vernon Reid (Living Colour), Robbie Robertson, Rich Robinson (The Black Crowes), Carlos Santana, Kenny Wayne Shepherd, Marnie Stern, Stephen Stills, Andy Summers, Mick Taylor, Susan Tedeschi, Vieux Farka Touré, Derek Trucks, Eddie Van Halen, Joe Walsh, Nancy Wilson (Heart)
There isn't a shredder on the planet who doesn't remember their first electric guitar. In fact, it's for that exact reason why your first electric guitar should built with meticulous attention to every detail. In this section, you'll find an impressive range of beginner electric guitars that were designed with your ambitions in mind, so you can enjoy sharpening your skills on that same special instrument for many years to come. Everyone who has a passion for playing music deserves to hone their craft on an electric guitar that is a perfect balance of playability, beauty and tone. But that sentiment especially applies to beginners, so they can build the confidence necessary to continue on with the instrument. Thankfully, all of the most well-known guitar brands specialize in their own beginner electric guitar models. From Ibanez and Epiphone to ESP and Dean, these companies take great pride in nurturing the skills of future pluckers, strummers and shredders. Squier is no stranger to the world of beginner guitars, and their Vintage Modified Jaguar HH electric guitar is everything a budding up-and-comer could ask for. Featuring a 24'' scale fast action neck, and a set of Duncan Designed pickups for a multitude of humbucking tones, the Squier Vintage Modified Jaguar is an updated sunburst classic that looks and plays like a dream. Another big-seller is the Epiphone Les Paul 100 electric guitar. Consisting of open-coil humbuckers and a genuine Les Paul sound, this axe contains superb electronics and a solid tone, while the tune-o-matic bridge ensures you that this beauty will stay tune through an abundance of practicing. It's incredible to think that at one moment in time, Jimmy Page had difficulty forming an open chord, or that Eddie Van Halen had trouble with hammer-ons. But even the greatest guitar players had to start somewhere, just like you. Every guitar player improves with time, and when you have a beginner electric guitar that's constructed by professionals, the learning stages feel will less like a duty, and more like the start of an exciting adventure.
3) Incomplete sentences due to text running off the edge of the page on page 101, another grievous layout error. You will be paying for the following paragraph "On the next page is a basic single pickup wiring diagram for telecasters using one pickup. this with either the bridge or neck pickup. The pickup will have a volume and tone control. plenty of good sounds with this setup.If you want to play around with the tone, you can or weaker capacitor. Ading a stronger capacitor sends more treble to the ground, and giv bass tones. Note: there are many ways to wire pickups to the pots. This is just one examp "
3. Peavey Vypyr VIP 2 40-watt 1x12 ($199): This amp is an all-in-one powerhouse, equally capable of handling electric guitar, bass and acoustic all in one amp. Not only is it capable of effects modeling, it can also handle instrument modeling, giving the player access to acoustic, violin, bass and many other stringed instruments. As far as effects go, it boasts more than 25 effects with controllable parameters and with over 40 watts of power, it’s even ideal for rehearsal.

Having a tuner on your pedal board is useful but these days I more often use a clip-on tuner, specifically the TC Electronic Polytune Clip (Buy at Amazon UK, Amazon US). I don't like the main signal to run through the tuner all the time if I can help it (I use the GigRig G2 switching system) but if you don't have that luxury, then look for a tuner with True Bypass like the TC Electronic Polytune 2 (Buy at Amazon UK, Amazon US) or use a Volume pedal that has a Tuner Output (many do these days!).
This pickup is a solid choice for those who might want to keep their options open in terms of style or who have a responsibility to multiple genres and music types. Typically you’ll use the JB model for the bridge and the Jazz model for the neck, matching the configuration for notable users such as Seymour Duncan himself, Randy Rhodes and Jeff Beck.

Serial #59640 New York label Epiphone Triumph circa 1949. Blonde finish. Spruce top, tiger flame maple sides and back. Cherry neck with diamond mother of pearl inlay. Small nick less than an inch wide on left front. Original Frequensator tailpiece with nickel finish, partly worn. Grover tuners fastened with screws and glue. Edging on back body has .25” gap at connection.Blonde natural lacquer finish in good condition. Glossy and brilliant color. Shipping quote inside US only. Ask for quote outside the US. 
Catalan guitar is most well recognized as being extremely romantic, often with a slow tempo and careful attention paid to tone quality, note sustain, and voice leading. In contrast, Catalan guitar can also be brilliantly virtuosic, with tempi in excess of 160 beats per minute. Unlike flamenco's improvisational tradition, Catalan guitar music is composed and meticulously notated.

Some resonator guitars possess metal bodies and these are called steel guitars. This can lead to some confusion with the Hawaiian guitar of the same name. They are two distinct instruments. The Hawaiian steel guitar takes its name from the steel bar used to create the glissandi and the Resonator steel guitar refers to the material used for the construction of the body.
The road toward becoming a better guitarist is paved in… books? It certainly can be, although there are plenty of routes that both beginners and professionals take to improve upon — and bone up on — their craft. The books on this list are about history and technique. They’re books that you’ll pull off the shelf for years to come to look up a vintage guitar you’re curious about or a chord progression or song you’ve been meaning to master. You may find additional inspiration reading the autobiographies of your favorite guitarists, but we decided to leave those off this particular list. If you’re in the market for a good guitar book, read on.
As auto wahs, envelope followers, and other dynamically controlled filter effects respond to your attack, you don’t want to limit dynamics with compressors and/or distortion pedals that reduce dynamic range. Most players also put wah pedals first in the signal chain—mostly to come before distortion effects—however Tom Morello is a notable exception.
DIY Pedal Kits – supplies hand made guitar effect pedal kits from the UK. All you need to complete their kits are a small number of basic tools. These are a soldering iron, screwdriver and wire cutters/strippers. In addition, needle nose pliers make things a LOT easier but they aren’t essential. Included in each kit is a pre-drilled metal enclosure, 3PDT true bypass) switches (if applicable), high-quality quarter inch jacks, all wire, solder, heatshrink, components, etc needed for the build, 2.1mm center npower supply socket and full color build guide.

The full-size Davidson guitar features a maple fretboard consisting of strings that sound very pretty good once you have tune it right out of the box. This Davidson full-size electric guitar comes with die cast tuners designed to keep it in perfect sound shape, followed by a practice amp having an overdrive body, which makes the practice exercise easy and fun-filled. The amp can be tuned with an iPhone App and by the time you set this baby to work, you will surely get your neighbors screaming for the peace.

Power attenuation[when defined as?] can be used with either low-power or high-power amplifiers, resulting in variable-power amplifiers. A high-power amplifier with power attenuation can produce power-tube distortion through a range of listening volumes, but with a decrease in high power distortion. Other technologies, such as dual rectifiers and the sag circuit[jargon]—which should not be confused with attenuation—allow high power amplifiers to produce low power volume while preserving high power distortion.[27]

This Ibanez has a flamed sycamore top, and delivers a well balanced sound unplugged or plugged in. It has a great finish that is referred to as vintage violin. Owners of this guitar say it sounds great as the similarly priced Seagulls and Yamahas. The price has recently dropped on this guitar, which was a pain point for many owners. At $250 it’s a steal given the quality. The onboard pre amp contains a tuner, which is nice for beginners to always stay in tune. The slim neck will also make for great playability. Click here for more pictures and details.
A lot of people will tell you that Jackson is not what they used to be. I’m not really going to try to refute or prove this claim, but their guitars are holding up pretty well at this moment. It’s still a brand you can trust to build you a solid guitar. Case in point that JS32 Dinky. It’s my favorite Jackson even though there are much better models in their current lineup.
Many consider the D-28 to be ultimate expression of the dreadnought form. ‘Reimagining’ such a guitar could be a poisoned chalice. Fortunately, you can still feel the gravity of that 184 years of history in its high-end guitars. The latest D-28 features forward-shifted bracing, a wider nut and vintage-style aesthetic changes, but it’s the new neck design that really makes this the most comfortable and accessible dreadnought playing experience we can remember for some time. The sound is balanced and maintains the very definition of an ‘all-rounder’. Notes ring out with sustain - that clear piano-like definition we love from Nazareth’s craftsmen. Harmonics come easy and, with strumming, the high mids and treble have choral qualities that don’t overshadow the lower mids. Despite the tweaks, our test model still largely feels like the acoustic equivalent of Leo Fender’s Stratocaster design. Just as that outline is most synonymous with ‘electric guitar’, so to the D-28 continues to embody the dreadnought in look and sound.
Dean Guitars is an American manufacturer, founded in Chicago in 1977. They build their guitars for speed players, and are famed for their eye-catching models, including the iconic Razorback. Signature models are also a specialty and they produce guitars for the likes of Dave Mustaine and Michael Angelo Batio, as well as huge line of Dimebag Darrell signature models.
Before it gets shipped to you, each Monoprice guitar undergoes a setup, tuning, and inspection process by Master Luthier Roger Gresco here in Southern California. The setup ensures that the neck is straight, the action is right, and that it will stay in tune. Additionally, it comes with everything you need to get started, including strings (installed), a heavy-duty zippered black gig bag with shoulder strap, and a truss-rod wrench.

PRS S2 Vela comes as one of the more extraordinary models in this company’s lineup. This is made apparent by the body shape that stands out from their usual designs. When I had some one-on-one time with this axe, it left a good impression. One thing that really stuck with me was just how light it was. That usually means a thinner tone, but not with this PRS. It plays great, and is pretty smooth.
There’s another wrinkle: vintage-style pickup magnets can weaken over time, resulting in a softer, smoother tone. Some pickups are designed to mimic this ageing process. Say you were looking for a vintage P.A.F.-style humbucker: You could choose between one of our models that that sounds like a pickup straight off the late-’50s production line (the Seth Lover humbucker), and another that mimics a similar pickup as it would sound and look today after decades of wear and tear (the Antiquity humbucker).
In a nutshell: Lowell Kiesel is the name of the guy who founded Carvin. He originally sold guitars under his own name, but later changed the company name to Carvin, a melding of the first names of his two sons. So, when Carvin changed the name on their guitars to Kiesel, they were actually reverting back to their roots. Kiesel is Carvin, and Carvin has always been Kiesel.
Roland has come a long way from its humble beginnings back in the early '70s as a rhythm machine manufacturer. The company grew to produce various other instruments and amplifiers, and is now one of the biggest music gear manufacturers in the world. With so many guitar brands under their name that could produce amps for them - like Boss and Line 6 - they still take the effort to build their own branded amps, and the success that they are enjoying is proof that they are doing the right thing. Their most popular amp is still the Roland Jazz Chorus, as used by artists like Albert King, Andy Summers, Metallica's James Hetfield and Kirk Hammett, Robert Smith of The Cure, Jeff Buckley and many more. These days they have a variety of amplifiers in the entry to mid-tier market, most of which continue to garner great reviews.
First off, I would like to say I had a lot of fun building this. Also, my hat goes off to the person that hand wrote all the tiny labels on the parts. With that being said, I couldn't get it to work. No sound at all, and only the light came on when I hit the switch. Now the fact that it didn't work could totally be an error on my part, but who knows. Now what I didn't like about this product is this: the casing is pretty small, so everything is pretty cramped (which may also contribute to why I wasn't able to get this to work, although, if you read other reviews, which I recommend for further useful information, some managed just fine), some pieces were mislabeled (There is a review that sorts this out), and the directions aren't very clear...well I thought they were clear enough, but look where that got me, so be ready for that. So 3 stars for fun, good price, and faster than expected delivery.
WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!
Gibson Brands, Inc. is considered as an American producer of guitars and other instruments, which is located in Nashville, Tennessee. The brand was earlier known as Gibson Guitar Corp. The company was founded by Orville Gibson in 1902. They are famous for its innovative and superior quality guitars. They sell their guitars under different brand names. These guitars are available at little higher rates. The price range starts from Rs. 49,500/- onwards (approx). For more details, visit Gibson.com.

Vacuum tubes were the dominant active electronic components in bass amplifiers manufactured from the 1950s until the early 1970s, and tubes continue to be used in the 2010s for expensive bass combo amplifiers, amp heads, and preamplifiers (as well, tube amps continue to be used by audiophiles for some expensive home hifi stereo systems). Tube amplifiers for bass almost always use class AB1 topology for efficiency reasons.

The bass guitar has a long neck (scale-length) and thick strings. The open strings of the bass guitar corresponds to the four lowest strings of the guitar and are pitched an octave lower. The standard bass has four strings though five and six string basses are available which extends the range of the instrument. Though the bass guitar is the bass instrument of the guitar family and the double-bass is the bass instrument of the orchestral string family their similar roles have drawn bass players to both instruments.
Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (coffeehouses, small pubs, etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.

Unlike most new wave guitarists at the dawn of the Eighties, Honeyman-Scott had impeccable fashion sense. He always maintained a timeless detached rocker look, and his aviator shades, medium-length shag haircut, suit jacket and jeans attire never really went out of style, unlike the geometric haircuts and DayGlo suits that many of his contemporaries wore. He always played the coolest guitars onstage as well, from classic Gibson Les Pauls and Firebirds to custom-made Hamers and Zemaitis metal-front guitars.

I have a problem visualizing a pickup wiring diagram that I am trying to set up. I just purchased a set of the new Fluence Strat pickups and I can’t figure out how to connect one of the wires coming from the bridge pickup (yellow wire – preamp input). I am using 3 mini toggle switches instead of the 5 way switch so I am having trouble transferring the different wiring scheme. Basically, the Preamp input and the preamp output from the bridge pickup connect to the 2 connections that normally have a jumper on the 5 way switch, so I can’t figure out how to change the wiring. I can upload the diagram if that would help. Thanks.

A neat recording solution for when you want the sound of a speaker running flat out, but without being thrown out of your flat by your neighbours!A practical method endorsed by those engineers who don't like to leave their comfortable chairs too often is to combine the above techniques by using two close mics, one on-axis and one off-axis, plus one distant mic a few feet from the cabinet. If the close mics have very different characteristics, for example a capacitor mic on-axis and a dynamic mic off-axis, you'll get an even greater choice of tonality, as you can vary the mic balance being recorded. Switching the phase of individual mics can often yield interesting combinations and, if you really don't want to leave that chair, you can also delay the ambience to increase its effective distance when it is combined with the other mics. Each millisecond of delay is roughly equivalent to 12 inches of added distance.


SOLD OUT: Super condition its been kept in the case over 25 years WoW!... JVG just set-up and plays wonderfully no buzz no drag its EASY to play now and it has NO WEAR almost like owning NEW Vintage! Sounds good ! its loud and robust TONE this is a great deal on an absolutely wonderful guitar. This was well crafted in Korea in the late 1980's same as Japan spec incredible. Lots of vintage guitar for a great price Its woods are as follows... Top is Spruce nice straight grained and may be solid cant see a seam it is what it is as made, the back and sides are all a fine instrument grade mahogany as is the neck a medium slim profile neck feels great , the headstock has the rosewood overlay with Fender logo in mother of pearl with gloss finish to front headstock as the body is gloss front - sides and back and the back of neck smartly in satin finish to not show finger prints easily.. Fit and finish is rated JVG at very good - excellent vintage easily Near Mint rating I'm still looking for a dink and cant find one yet, but thats not to say there may be something minute somewhere but I looked it over good and she qualifies for near mint rating vintage and is WAY BETTER than average. The fingerboard I believe is ebonized rosewood and shows no divots at all... same with frets I polished them pre set up and I can attest they are excellent too... Neck angle and action is very good straight and as a result the action is set to within Martin spec and plays excellently with no buzzing. Original tuners on board and are good quality and do the job well, intonation on this guitar is good so it sounds sweet up or down the fingerboard... surprisingly great tone for a guitar anywhere near this price point, You will be very pleased. Comes with its original semi hard chipboard case black good all latches and handle are good, Here is a great sounding and playing Vintage Korean guitar that will be sure to please. Questions ? asl Joe jvguitars@gmail.com .
Electric basses tend to use a medium jumbo fret as most Fenders have thru the years.  There are some folks who like the medium or even the very narrow/small mandolin fretwire for basses – this is more of a vintage feel, like the earliest Fender basses (Fender created the Precision Bass in 1951).  Since string height for bass strings is higher due to gauge and tuning, they are easy to grip and many bassists do not seem as concerned about fret height as guitarists.
You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.
Umm, no. Jimmy Page and Hendrix have both alluded to the fact that without Robert Johnson, they would never have existed. His albums were released before the 50's and 60's. To think that most of these guitarists (and by effect the people influenced those artists as well) didn't have their hands on Robert Johnson or Mississippi John Hurt albums which they learned from is preposterous. Please stop typing.
You’d be hard-pressed to find a more distinctive guitar tandem in modern metal than Zacky Vengeance (Zachary Baker) and Synyster Gates (Brian Haner, Jr.). From their sound, to their look, even to their names, the duo routinely go down guitar paths other metal axmen don’t dare travel, spicing up Avenged Sevenfold’s otherwise dark and aggressive attack with, among other things, hooky, major-key melodies, laid-back acoustic picking, buoyant, carnival-esque rhythms and a whole lot of style.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Wood: Maple & Wenge - Neck Construction: 5 Piece - Nut Width: 54mm - Fingerboard: Rosewood - Frets: Jumbo - Inlay: White Dot - # of Strings: 7 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Gibraltar Standard II-8 - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Circuit Type: Active - Pickups: EMG 808 - Pickup Configuration: H-H - String Instrument Finish: Cobalt Blue Metallic, Galaxy Black - Made In: Japan

Another negative I found was that this book focuses more on traditional music notation, and places guitar tablature into the background. As a guitar teacher, I believe that tabs are the next best thing to sliced bread, since it makes learning soooo much easier for beginner guitarists. And since learning the guitar is hard, anything that makes it simpler is more than welcome. On the other hand, if you want to learn to read standard music notation, this will be the way to go for you.
By the 1950's, brands like Gibson and Fender were gaining notoriety thanks to the popularity of rock 'n' roll and its stars weilding electric guitars. Guitarists like Dick Dale, Bo Diddley, Chuck Berry and Chet Atkins could all be found carving their own places in music history with the electric guitar, and by the early 60's the instrument saw an extraordinary upsurge in popularity. Today, there are an endless amount of rock sub-genres, making no shortage of superbly crafted electric guitars from the world biggest brands, including Ibanez, Epiphone, and Danelectro, as well as Godin, Gretsch, Peavey and more. Whether you're into black metal or folk rock, you can be sure that there's an electric guitar that perfectly matches your own style and tastes, and it can easily be found right here, regardless of your skill level or budget.
×