Resonator guitars are distinctive for not having a regular sound hole instead they have a large circular perforated cover plate which conceals a resonator cone. The cone is made from spun aluminum and resembles a loudspeaker. The bridge is connected to either the center or edge of the cone by an aluminum spring called the spider. The vibrations from the spider are projected by the cone through the perforated cover plate. The most common resonator guitars have a single cone although the original model patented in 1927 by John Dopyera had three and was called a tricone resophonic guitar. Resonator guitars are loud and bright. They are popular with blues and country guitarists and can be played with a slide or conventionally.
I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.
In 2013 Vox released updated "G2" versions of the 15 watt and 50 watt heads, and added a combo version of the NT15H-G2 called the NT15C1. Compared to the original NT15H, the NT15H-G2 adds a foot-switchable Girth channel (which first appeared on the original NT50H) with an additional 12AX7 in the preamp section, a "Dark" switch, a digital reverb, and an effects loop. However, Vox did not retain the pentode/triode output section modes from the "G1" version that allowed for full or half power operation as well as a broader tonal palette. The NT50H-G2 differs from the original NT50H with the additions of an XLR D.I. out and a digital reverb, and the deletions of one 12AX7 preamp tube and the "Tight" switch. It also appears the FX loop is no longer bypassable. Gone is the bright chrome look of the "G1" models as both heads received new cosmetics in the form of a black mirror finish on the tube cage and a new suitcase-type handle. Vox also released "G2" versions of their matching cabs: the V112NT-G2 (one Celestion G12M Greenback speaker), and the V212NT-G2 (two Celestion G12H 70th anniversary model speakers), each also sporting the suitcase-type handle. The new NT15C1 combo combines an NT15H-G2 chassis with a single 16Ω 12” Celestion G12M Greenback speaker in a black tolex cabinet with a suitcase-type handle.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLO ARM INSTALLATION The tremolo arm can be inserted and removed very easily. Insert the arm into the armhole on the tremolo base plate. Pull up on the arm to remove it. TREMOLO ARM ADJUSTMENT (SAT PRO) To adjust the height of the arm, remove the tremolo spring cover from the back of the guitar, and use a 3 mm Allen wrench to turn the height adjustment screw attached to the bottom of the tremolo block.

You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Pearl - Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Edge III - Cutaway: Double - Hardware: Black - Pickup Configuration: H-H - String Instrument Finish: Devil's Shadow
Modelling/digital amps: This type of guitar amp uses digital technology to stimulate old-fashioned technology. They are able to emulate old amplifiers using software, and this feature enables them to combine several amps into one. Their programmable nature enables the user to switch digital effects such as the chorus, delay, and other features. Some models of these amps have a digital or analog output that goes directly to a recording or PA system through speaker simulation.
The American Nashville B-Bender guitar is modeled after the personally customized instruments of some of Nashville’s top players, featuring a Fender/Parsons/Green B-Bender system, two American Tele single-coils (neck, bridge), a Texas Special Strat single-coil (middle) and five-way “Strat-O-Tele” pickup switching. Ideal for country bends and steel guitar glisses, this Tele is available only with a maple fingerboard.
Which brings us to this 1985 DT-250. While it sports the tail notch, the shape is a little more sleek and diminutive than the comparable Dean ML. The lower front bout is extended to be almost symmetrical with the diagonally opposite bass wing. The treble-side lower bout is shortened, giving the whole guitar a tasteful offset-X shape… X Series. To add dimension to the shape, Fuji Gen Gakki added “crystal cuts” to the edges, basically code for angled bevels.

This thing has taken quite a rap from what I've seen. People griping about it not being as good as the previous model. I don't know much about the other model, I didn't have one. So, I'm unbiased. I've had tons of peddles, singles and multi fx. I absolutely love this! I've been playing for over 20 years on stage. I'm a worship leader at a big Church. This is great for replacing my single peddles. I thought it was very comparable in sound. I use it through an American Peavey classic 30 with an English Celestian speaker. It rocks, period. I think the sound quality is great. I don't need tons of options. I hate too many. I like have the excellent fewer options. They are great! I love how easy it is, I had it figured out right away. I've used both. On stage and studio. This is ... full review
I have come across a few guitars that were easier to play than just about anything else I've ever played, including scores of very nice, expensive guitars.  My champion here is an old Yamaha acoustic that I found at a garage sale for $40.  It looks terrible (burns, dents, dirty, etc.).  The tone is not sweet (hint of cardboard).  It plays like butter.  It is the one guitar that I have kept (out of way too many to count) to give to any family member who decides they want to learn.
But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).

Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
It is easy to make the mistake that the tone control set-up in an electric guitar is a simple single stage Resistor / Capacitor filter, where the two components are in series, the other side of the capacitor goes to ground, the signal is applied to the other end of the resistor and the output is measured across the capacitor. If that were so then your first calculation is roughly correct, while in a practical situation in the second, the capacitor would be fed from the impedance of the signal source. Lets say this is a test generator with an impedance of 600 ohms – the -3dB cut off would be around 12kHz. This is not the case for the typical electric guitar.
Super info. thks. Just found your site as I too, had some questions about action. I have a Martin D-28, manufacture date late 2013 and I purchased new in Feb. of 2015. It has always been humidified and kept in the case. I only really noticed the ‘high’ action when I changed to drop D tuning and I noticed amplified ‘string whip’. I estimate the height to be 4mm. I re-tuned and looked again and the action is noticeably higher than my Epiphone EJ 200 and Simon & Patrick Woodland Folk. I think, as you have said, the guitar is just getting acclimatized to it’s ‘new’ home. Play ability is still good, (although the player needs work!) but I think I will take it back to Folkways Music to have the Tech take a look. Thks. Great site, I will bookmark it!
Finally, there were some twelve Hawaiian lap steels in ’55, the EG-NT, EG-K, EG-Z, EG-A, EG-S, EG-R, EG-L, EG-7L, EG-P, EG-8L, EG-M and EG-NW. Again, since I have no reference materials, there’s no point in attempting any description. However, many of these guitars continued on into the ’60s where we’ll discuss them in detail, and you can probably extrapolate backwards to these mid-’50s models, allowing for pickup changes, etc.

Major-chord progressions are constructed in the harmonization of major scales in triads.[21] For example, stacking the C-major scale with thirds creates a chord progression, which is traditionally enumerated with the Roman numerals I, ii, iii, IV, V, vi, viio; its sub-progression C-F-G (I-IV-V) is used in popular music,[22] as already discussed. Further chords are constructed by stacking additional thirds. Stacking the dominant major-triad with a minor third creates the dominant seventh chord, which shall be discussed after minor chords.
The latest in a grand lineage of guitar-based Kings, Marcus [pictured, top] has - without exaggeration - the chops to bear that weighty association. Mentored by ‘Uncle’ Warren Haynes, he was personally tipped to us by Kenny Wayne Shepherd and leads a band of formidable players that seem able to turn on a dime from Miles Davis jazz jam to blues and searing Southern rock. 
This thing has taken quite a rap from what I've seen. People griping about it not being as good as the previous model. I don't know much about the other model, I didn't have one. So, I'm unbiased. I've had tons of peddles, singles and multi fx. I absolutely love this! I've been playing for over 20 years on stage. I'm a worship leader at a big Church. This is great for replacing my single peddles. I thought it was very comparable in sound. I use it through an American Peavey classic 30 with an English Celestian speaker. It rocks, period. I think the sound quality is great. I don't need tons of options. I hate too many. I like have the excellent fewer options. They are great! I love how easy it is, I had it figured out right away. I've used both. On stage and studio. This is ... full review
Combo guitar amplifier cabinets and guitar speaker cabinets use several different designs, including the "open back" cabinet, the closed back cabinet (a sealed box), and, less commonly, bass reflex designs, which use a closed back with a vent or port cut into the cabinet.[26] With guitar amps, most "open back" amp cabinets are not fully open; part of the back is enclosed with panels. Combo guitar amp cabinets and standalone speaker cabinets are often made of plywood. Some are made of MDF or particle board—especially in low-budget models.[26] Cabinet size and depth, material types, assembly methods, type and thickness of the baffle material (the wood panel that holds the speaker), and the way the baffle attaches to the cabinet all affect tone.[26]
Slash is a longtime fan of legend Seymour Duncan’s hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash’s first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
Phasers like the popular DOD-Phasor 201 are a perfect example of what a solid phaser pedal should sound like. Modern designs allow you to control many aspects of this effect, which makes them pretty versatile and suitable for most genres of music. Guitar players like Van Halen heavily rely on phasers to build their foundation, while some have even become famous due to their use of phasers. Phase shifters are generally very flexible and are among the most utilized modulation effects today.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
{"pageName":"[gc] pdp: ibanez s421 s series solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114572014;;;;evar65=Used-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
There’s 12 footswitches for you to control all your sounds and effects as well as a smooth expression pedal that can control swells, wah and even make parameter changes. A looper with 20 mins of record time is ideal for songwriters, buskers and those who need to be able to write music anywhere. It especially shines when coupled with the HeadRush FRFR-112 2000 Watt Powered Speaker.

A Japanese company which is renowned for its amazing guitars, Ibanez is a great brand for beginners. Since the Ibanez RG450DX RG Series Starter Electric Guitar has a maple neck, mahogany body, and a rosewood fretboard. Together, these give this guitar a great sound. The Ibanez RG450DX RG Series Starter Electric Guitar is a pretty fine looking guitar with amazing sound to boot.
THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.

An overdubbing session is ideal for air-guitar miking because there is no leakage from other instruments. I usually prefer to maintain total isolation between the two sources, placing the guitarist and amp in separate rooms. But for some production styles, the acoustic air mic can also do double duty as a distant room mic for the amp, with the ratio of pick sound to ambience determined by mic placement and amp volume. I've recorded some very hefty-sounding rock 'n' roll power chording this way, as well as a variety of vintage-style solos and rhythm parts. At the board, a low shelving or low-midrange EQ cut, combined with a subtle high-end boost around 4 to 6 kHz, will usually help these tracks jump out of the mix.
One of the newer brands on this list, Jackson Guitars was established in Glendora, California in 1980. However they’ve made a huge impact to the world of metal, and their guitars are used by some of the biggest names – Randy Rhoads, Adrian Smith, and David Ellefson to name a few. Some of their most famous models include the Soloist, and the Rhoads.
One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.

The MD400 has one Alnico V humbucker at the bridge and one Alnico V mini-humbucker at the neck. Both are ‘rail’-style pickups, which are quieter, and provide more consistent tone and sustain across the strings. Both pickups have been coil-split, too—so push or pull the master “Tone” knob to disable one coil of each humbucker, effectively turning them into single-coil pickups.

{ "thumbImageID": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "defaultDisplayName": "Epiphone Limited Edition ES-335 PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ebony", "sku": "sku:site51321473136598", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony-1321473136598.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Ebony/H79035000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51321473136438", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst-1321473136438.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Vintage-Sunburst/H79035000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51321473136578", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "699.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Natural-1321473136578.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Natural/H79035000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Cherry", "sku": "sku:site51321473136388", "price": "379.99", "regularPrice": "499.00", "msrpPrice": "765.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry-1321473136388.gc", "skuImageId": "Limited-Edition-ES-335-PRO-Electric-Guitar-Cherry/H79035000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }