I’m getting a bad hum that almost goes away when I turn the volume up completely….gets loud as I turn it down. Someone rewired the guitar with 2 pair wire…..they attached a ground to the vol and tone pots everywhere the wires went….and also the body of the switch. I think it’s a bad ground loop problem….I’m going to change everything to single strand wire. I’m guessing there’s a voltage difference somewhere and it gets close to normal when I turn it all the way up on the volume pot.

Reverb is a sound effect used both in music and audio engineering, which adds a spatial dimension to the original track. To put it into more simple terms, a reverb gives you an impression that the sound is originating in a large room. You are hearing the source sound but also its numerous iterations as it bounces off different surfaces. Reverb guitar effects pedals offer a simulation of this phenomenon.
SOLD OUT Here we have a great 45 Year old Japanese Vintage 1971 Yamaha FG180 Red Label Nippon Gakki Martin like vintage tone for a fraction shes a Boomer low action plays easily WoW! ... Just in and AVAILABLE JVG- Fresh Release: I can tell you this is a real good one folks! No structural cracks or checking in finish, its a beautiful Solid Spruce Top and it is pretty flat with no noticeable bellying and its bridge is tight, action is excellent within Martin specs... This guitar received the JVGuitars SET -UP upgrade to bone nut and compensated martin saddle as well as the brifg pins upgraded to very nice Rosewood with abalone dot detail as well as a new set of Martin Marquis strings ( 12’s ) 80/20 Phosphorus bronze . The neck has a classic feel to it with an excellent vintage finish still shines like glass …excellent with a classic Martin like feel in a soft V Medium Profile and has the correct relief set to within M spec frets are still good - we leveled and dress them. We first took off the old strings and fully clean the fingerboard and re-hydrate the woods before polishing all surfaces and lubricating the excellent upgraded Ping Deluxe tuners, Not to be confused with the similar model made in Taiwan this the famous Nippon Gakki made in Japan one and this is a really good one at that folks. Never abused, well cared for, no cracks, great neck alignment to this day, action excellent, plastic tone robbing parts - GONE! Bone & Rosewood sustains better than ever…. these are know for great “ M” Like vintage tone and is in great vintage condition,
Someone is going to be very pleased. For a Song Any questions or to contact Joe to buy this contact Joe at: jvguitars@gmail.com Thank you for your interest Joe ..
Additionally, George Harrison used a custom-built rosewood Telecaster during the recording sessions for The Beatles‘ Let It Be album (including the rooftop concert), played through aLeslie speaker; Big Twist and the Mellow Fellows guitarist Pete Special frequently had reissue of Harrison’s Tele onstage in the mid-1980s, but rarely played it. Pearl Jam singer and guitarist Eddie Vedder has been known to use a custom black Telecaster with a white pickguard containing a black arrow decal pointing towards a target design under the strings. Guitar virtuoso Chet Atkins, known for the variety of acoustic and electric guitars that he used, occasionally played a Telecaster in his duets with Jerry Reed.[6]
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: vox","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Variable 1: Speaker size. In Clip 1 you hear similar phrases played through models of four common speaker types. First comes the sort of 10" speaker you’d find in a small Fender Champ-style combo. Next is the 12" speaker of a midsized Fender-style combo, then a 12" Celestion Greenback you might encounter in a vintage Marshall cabinet, and finally the Celestion Alnico Blue from a vintage Vox combo.
Simple answer is, if you have money for the higher end of Taylor, buy a Collings. I've been working as a repair tech in a store that stocks Taylor for around 5 years. Went to lutherie school under one of the best guitar builders in the country. I've played dozens of examples from nearly every model range Taylor has to offer, as well as a few of the more limited edition high $$$$ range. I will give credit where it is due, on the USA made models fit and finish is above many other brands.
Bull necked and heavily tattooed, Mike Ness is not the kind of guy you’d want to mess with. The Southern California guitarist, singer and songwriter has known good times and bad, punching his way out of a serious drug addiction in the mid Eighties. He has funneled these experiences into some of the most hard-hitting, plain-dealing rock songs to come out of the SoCal punk milieu. Ness launched Social Distortion in 1978.
Jim Root: Featuring mahogany body, maple Modern C shaped neck, ebony fretboard in Flat Black finish, maple in Flat White, 22 Jumbo frets, EMG pickups, EMG 81 in bridge position, EMG 60 in neck position, strings-through-body hardtail bridge, locking tuners, 3-way switch, single volume knob and large headstock.[18] Along with his Jim Root Telecaster, it is the only Fender guitar equipped with EMG pickups as standard.

Therefore, if you are a beginner that is still struggling to find a product that comes shipped with other accessories, you should really pay attention to this model. Besides, although this is a full-sized guitar, previous buyers of the model have stated that the unit is not particularly heavy. Consequently, it can be used by teens without worrying about its size and weight.

The Original Blackout humbuckers are designed to be everything metal, handling thick rhythm play and well-defined lead melodies at higher speeds. The tone has an almost shimmering quality, especially on a clean amp setting. The tone profile of both the neck and the bridge version of this pickup emphasize treble with a hollowed out mid-range that helps give you the best of searing leads and heavy power chords.
The far mic will give you a bigger, more heavy-metal type of sound with a more pronounced bottom end on it. The reason for that is low end sound waves take much more distance to fully develop than high end waves. Someone once told me that a low E note on a bass guitar takes thirty-three feet to fully develop. Whether or not that is true will only be known by people who have enough time on their hands to calculate such things. I do know that if you take a tuning fork that's vibrating with a high note and stick it in the imaginary puddle of water, it will generate waves that are small in comparison, and closer together than what a low note will make. Simple physics.
Home made, custom 250watt (1000w capability) -Vintage Concertina box casing -Wireless (DC 12v rechargeable) -AC 240v (2 point wall plug) -Bluetooth(USB/Memory stick-interchangeable) -2 x built in speakers (treble ) -250Watt, 8" Sub (ground facing bass/stand) -1 x mic input -L/R sterio guitar input -2 x sterio external speaker output connectors -Built in cooling fan -Internal battery chargi ...
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future.

not even close. No offense but John Mayer is trash absolute trash. Jack White is decent but not a guitar god at all. This is my list, and I'm going to leave out every guitar player that came before the Beatles, not saying Chuck Berry or B.B. King couldn't shred, but I'm trying to relate to the modern idea of Rock and Roll. I'm also judging on a lot more than just ability to "shred". And to the one goon…Jimmy Page SHINED live, that was Led Zeppelins appeal, you felt like you were at the biggest show on Earth…you probably just watched a few videos on youtube from the end of the band's career when he was a herion addict.

Slash is a longtime fan of legend Seymour Duncan’s hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash’s first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
A very stylish black guitar by ENCORE with a great 'Humbucker' pickup.......The simplicity of this instrument makes it a joy to play and It sounds as good as it looks! Used....but in great condition and showing only minimal signs of use (no scratches, chips or dings) and is in full working order. The scale is full length (not 3/4 or 7/8)...but the body size is smaller and lighter than a typical stratocaster (see image for comparison), which makes this guitar perfect for a younger / smaller person or anybody who might like a very robust but lighter instrument. All reasonable offers considered.
In 1958, Gibson made a radical design change to their Junior and TV models: with the design change came cosmetic changes to these guitars that would later take on enormous importance. To accommodate player requests for more access to the top frets than the previous designs allowed, Gibson revamped both these electric guitar models with a new double-cutaway body shape. In addition, the Junior’s fresh look was enhanced with a new cherry red finish, while the re-shaped TV adopted a new, rather yellow-tinged finish for its new design.

But it would be a mistake to think that this guitar is only suitable for Jason Mraz strumming and happy songs, because it’s just as good for heavy metal! That sweet little tone can easily be transferred to heavy music, or why not pop, jazz or blues? In other words, this guitar is extremely versatile and is the best option for musicians who play many different types of music and want a guitar that works well for pretty much everything.

The Marshall Mini Jubilee 2525C Combo amp is closely based on the highly-coveted Marshall Jubilee series of amps. The powerful preamp has been designed to the specifications of the original 2525 Silver Jubilee diagrams, making this an authentic reproduction of these now out-of-production monsters of rock. Don’t let this little beast fool you though, the ECC83 & EL34 valve set produces some seriously loud sounds through the single 12” Celestion G12M–25 Greenback speaker. Perfect for lead and rhythm, this great combo amp is ideal for both stage and studio!
A common complaint with the Bullet Strat among our panelists was that the single-coil middle and neck pickups buzzed too much. This is the nature of single-coil pickups. The nice thing about the HSS Bullet Strat is that you do have one humbucker, and setting the pickup selector to combine the bridge and middle or middle and neck pickups will also cancel the buzz. Also, the use of a single-coil pickup in the neck position makes it difficult to get the mellow, jazzy tones that you’ll get from guitars that have a humbucker in the neck position, but we figure few beginners are looking for that sound.
I have a beautiful 2003 Ltd and my friend who has played for many years has the Taylor and he ended up borrowing my tak for five months he didn't want to give it back you know the guy has played with some well known folk's so I trust his judgment played with Keith Green and America and I have played over thirty years so I haven't let to many go by without some trial and ownership this tak is as good or better than the best Martin can offer. Ovation can't touch it and of course Gibson is too soft for me I own a fender and a Yamaha 6 and 12 for the money you can't beat a yam and I have played hummingbird to dove guild gretch Washburn breedlove which is a favorite not many I haven't played so with all this my top ten is Takemine Martin Gibson Breedlove Hagstrom Taylor Guild Gretch Washburn and Yamaha. If you can find a Hag it will blow your bag I have a 1971 Hagstrom acoustic I believe it was a demo for Golden Earing it was a gift from an old friend from Deutschland any way I will say ...more
I liked that the test used identical setups and that the results were captured on a high resolution display. Often the debunkers use either their ears alone (and in a MP3 format as well for us to compare) or an oscilloscope which is a terrible measuring device for real sound because it can only display time and amplitude where the amplitude is a summed view of all the frequencies at the same time. The FFT clearly showed much much more.

There are two distinct kinds of transistors used in fuzz pedals, germanium and silicon. In the early 1960’s silicon transistors were fairly new and very expensive and germanium was the norm. Germanium transistors are susceptible to temperature changes and noise so they can be unreliable at times. They do have a very distinct tone, they also react very well to the guitar’s volume knob by cleaning up very well. As silicon transistors became less expensive they largely replaced their germanium counterparts in pedals due to their stability. The Silicon fuzzes generally produce more gain but often don’t clean up as well.

There is enough acoustic guitars in the world to rock it to sleep, with a peaceful feeling of spanish legends to it. On the other hand there are enough electric guitars in the world to guarantee that it will never go to sleep, because there is always an electric guitar playing somewhere in the world. Which is exciting and which also causes the prices for electric guitar amps to be lower than for the amps of acoustic guitars, while retaining the same level of quality. The Roland Micro Cube Guitar Amplifier is a tiny little angel in the form of metal and plastic combined. It is small enough to be easy to carry around and store wherever, but it is also powerful enough to attract the attention of anyone passing you in the street, sitting in the bar, or otherwise hanging out in your vicinity. With a punkish style and a punk attitude, it is the perfect little helper for any musician, beginner or otherwise.
Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.

Whether you play classical folk or modern metal, it doesn't matter. There is an amplifier to suit the needs of your music and your bandmates. All you need to do is take a moment to determine which features you need and you'll have plenty of amazing options to choose from. If you're just having a browse or aren't entirely sure where to begin your search for an amplifier, you'll almost certainly be best served by checking out our top sellers. An option such as the Fender '68 Custom Deluxe Reverb 22W 1x12 Tube Guitar Combo Amp with Celestion G12V-70 Speaker, for example, might be just what Doctor Rock ordered. This amp is small, yet powerful, and absolutely loaded with tone. Both of its channels boast reverb and tremolo, and, best of all, the "custom" channel features a modified Bassman tone stack, allowing for even more flexibility when you plug in and play.
An electric guitar can last many lifetimes; however, they have a variety of electrical parts and connections that, over time, can wear out. When that happens, you need to know how to fix or replace those electronics. The following are the parts that are most likely to wear out or break and need replacing. You can perform any of these fixes yourself without doing damage to the electric guitar — even if you screw up.
In August 2014 Vox released two Night Train limited editions, both of which were cosmetic updates to the NT2H set and the NT15C1 combo respectively, that recall a more traditional Vox aesthetic. For the Lil' Night Train NT2H-GD-SET, Vox supplied the NT2H head with a matte gold coloured tube cage and black control knobs, and then covered its V110NT cab with a retro-traditional “Brown Diamond“ grille cloth and basket weave covering (since there was no "G2" version of the Lil Night Train, this limited edition NT2H seems to mark the end of the line for this model as Vox makes no further reference to it). For the NT15C1-CL (Classic) combo amp Vox applied a similar treatment with the installation of a gold logo badge and trim on the front of the NT15C1 combo as well as adding the “Brown Diamond“ grille cloth.
Electri6ity has been around for a while now, but I think it's still the cat's meow of sampled guitar libraries because of how deeply sampled and deeply controllable it is. Its wealth of articulations will allow you to create stunningly realistic guitar tracks, but the trade-off is that there are a lot of keyswitches and keyswitch combos to learn at both ends of the keyboard, and it's a big library that costs $400. For that reason, it may be a little overwhelming to be a "go to" library, but if you have the ambition to learn and use it, your guitar tracks will have no competition.
Epiphone's Les Paul series were originally designed to allow the budget crowd to experience this awesome guitar without investing thousands of dollars. That's something that hasn't changed to this day. The Epiphone Special II is among the most basic Les Paul designs on offer, making it perfect for beginners. We've chosen this particular guitar because of its neutral configuration which will keep up with you even after you've built plenty of skill.
Unlike the Gio model of Ibanez included in their guitar package that only has two humbuckers for pick-ups. The GRX70QA has the three pick-ups configuration made popular by Ibanez consisting of neck humbucker, middle single-coil, and humbucker for the bridge. This pick-up combination goes well with the 5-way switching controls, volume and tone, to harness the sound esteemed for the kind of play.
The Fender Hot Rod Pro Junior III is a good example of what the older style beginner amps used to entail. The initial price tag is much higher than the typical beginner amps popular today, but it is also a better made, better sounding tube amp. The Hot Rod Pro Junior III can be cheaper in the long run for guitarists that want to eventually do professional work. Most beginner amps are not powerful enough or sound good enough to quite cut it as a professional amp. The Hot Rod Pro Junior III is a simple amp that provides the bare essentials to get a professional level sound. Going the Hot Rod Pro Junior III route is a bit less conventional for beginners, but it is a solid option to consider if plans of recording or playing live lay in the future.
A little bit of history will make this clearer… The original Fender Stratocaster switches were 2-pole 3-way switches (that’s actually what I have on my schematic, I think you’ll see why in a bit) and were intended only to select either the neck, middle or bridge pickup. However these were “make before break” switches where, as the switch is moved across from one position to the next, the next contact is made before the previous contact is broken. People found that if you could get the switch to rest in between those three positions that you’d actually have both neck and middle or middle and bridge pickups connected at the same time and, most importantly, it sounded good! It became a common thing to rest the 3-way switch in between the positions, so common that in the 60’s people were filing notches in the detente mechanism of the 3-way switch. These became the “notch” positions. In the 70’s, Fender adopted this popular mod into their stock switch thus becoming what we now use and call a 5-way switch but is, in fact, a 3-way switch with 5 positions.
OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.
Considering that the setup on a factory-fresh guitar might be good or bad (and few music stores bother to do setup on inexpensive guitars), we strongly recommend that you have a new guitar professionally set up, which will likely cost about $50. You can also learn to do it yourself; there are plenty of online tutorials, and even at age 15 I managed to figure out how to set up my first electric guitar with a little guidance from my guitar teacher. It’s a good idea for every electric guitarist to at least learn how to set action (string) height because you will want to adjust this to suit your style and skills as they evolve.

OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: acoustic guitars","pageName":"[mf] shop: guitars: acoustic guitars: fender","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: acoustic guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"composite acoustics","prop5":"[mf] shop: guitars: acoustic guitars","prop6":"[mf] shop: guitars: acoustic guitars","prop3":"[mf] shop: guitars: acoustic guitars","prop4":"[mf] shop: guitars: acoustic guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category"}
The AC15C1X is a modern take on the venerable AC15, with improved reliability and built-in effects. Vox's familiar clean and overdriven tone is ever present, courtesy of its three 12AX7 preamp tubes and two EL84 power tubes that drive a 12" Celestion Alnico Blue speaker - a speaker that many Rock and Blues players prefer. The amp has a dedicated Top Boost input for those who want Vox' distinct jangly tone. Finally, it comes with tremolo and reverb effect to add space and texture to your guitar tone.
Generally, guitarists with an array of pedals like to put their drive pedals first. This includes your overdrive, distortion, fuzz, or boost pedals. Some guitarists have more than one of these, and they usually go at the beginning of your chain. The reason for putting them first in your pedalboard order is because you will be distorting or boosting the purest version of your guitar tone. Putting a delay pedal before distortion means that the echoes from the delay pedal would themselves become distorted, resulting in an unnatural and messy sound. If you’re using an overdrive and a boost, it’s wise to put the boost first – that sends a stronger signal into the overdrive to get the most out of it.
There’s a bolt-on thin U-shaped maple neck, with a rosewood fretboard, and 24 extra-jumbo frets, which makes fast playing and string bending a breeze. As we highlight in our full review, the EC-10 is voiced by two ESP-designed passive LH-100 humbuckers at the neck and bridge positions, which are loud enough to cope with rock and metal lead playing, although articulate and warm when playing without distortion.
The last rating is the value, which gives you an idea of how good a purchase the guitar is for the money. You’d expect most sub-$200 guitars would give you good value for money, while guitars in the $1000 have to work harder to justify their price tags. Finally it’s worth noting that each rating is relative to its overall price. Of course a $2000 Gibson is likely to play and sound so much better than a $150 Squier, but they may both receive a rating of around 8 for features because we keep the ratings relative to the price.
The Fender Bassbreaker 15 Amplifier Head presents a budget friendly option for those in need of great tone. You have 15 watts of pure power to channel here as well as a studio friendly Power Amp Mute so you can record straight into a desk - a great feature for those in need of a powerful stage and studio amplifier. This is a professional grade amplifier head that features 3 very unique tonal options and overdrive levels to provide you with a whole host of lush fender tones that range from glass like cleans to vintage overdrive. Perfectly paired with the Fender Bassbreaker 212 Guitar Cab.
Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.
What makes the wah so timeless is its versitility, it can emulate a human voice, be a rhythmic device, boost a screaming lead, a tone shaping tool, among other uses.The first known commercial recording of a wah pedal is Cream’s “Tales of Brave Ulysses”. As we know the distinctive sound caught on with just about every guitar player on the planet! There are too many uses of the wah to mention here, almost 50 years later it is still a must have pedal for every guitarist. For an in-depth look at wah history and a great read please check out “Analog Man’s Guide To Vintage Effects”.
Purchase a more suitable microphone, if necessary. If you have found that your mic really doesn't capture sound the way you need, you'll have to research to find the right mic for your situation. For example, you might use a large diaphragm condenser mic to capture crisp, pop rock tones.[32] However, you should be able to achieve consistently good recordings with the use of either a common:

The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.
The Squier Affinity series is a great beginner instrument. All of the bodies & necks have been CNC manufactured, so they are consistent and solidly built. In recent years, Fender has completely re-hauled the Squier series of instruments to make them decent introductory level instruments, at a great introductory cost to the beginner player. You can choose from Strats, Teles and even Jazzmaster style guitars!
Jump up ^ Wright, Michael. "Jack Westheimer — Pioneer of Global Guitarmaking". Vintage Gutiar (July 1999). In August ’69, the Valco/Kay assets were auctioned off and W.M.I. purchased the rights to the Kay brand name. W.M.I. began to slowly transition Teisco del Rey guitars to the Kay brand name, which gave them greater credibility with dealers. This change was completed by around ’73 and the Teisco del Rey name then disappeared. This explains why you will occasionally see a Teisco guitar with a Kay logo.
Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.

What Fender might lack in heavy, modernized features, it makes up for in affordability, novelty and being some of the best all-around guitars in existence. They would also have to be considered some of the most stylistically versatile guitars, covering all kinds of musical genres and songs. We’ll focus primarily on the Standard (non-American) models, since they’re priced below our $700 cut off. If you want to go with something nicer, target the American series Strats and Teles.

: But in general, there's nothing wrong with Decca electric guitars, especially for indie musicians today who are looking for a vintage guitar with some character to it. Since most vintage guitar fans have seen every model that Gibson, Fender, et al, have ever made, many of the Japanese guitars of the '60s have a fresh look that stands out from the crowds. In 20 years, the M-i-J electric guitars of the '60s are going to be worth 4 or 5 times what they sell for now, and smart collectors who either can't afford Fenders, Gibsons and their ilk from that period, or who are interested in something more unusual, are already snapping them up.

Good questions. Firstly, swapping the saddle around has the effect of moving the tapered top edge of the saddle closer to, or farther from (depending on which way it was to start with) the front of the bridge. If you're wanting the string to be as long as possible, for example, you'd need to make sure the saddle is oriented in such a way that the tapered edge is at the tail end (farther from the pickups). If you look at my pictures above, you'll see that my D-string saddle is originally oriented in this way, but in my case I need to SHORTEN the string, so I rotate it and this gives me more forward adjustment. Since you need to do the opposite of me, you'd therefore need to make sure your saddle has the same orientation as what mine had BEFORE I changed it. I really hope that makes sense.

{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000-00-60x60.jpg", "imgAlt": "" } ] }

I own some 13 or so, high end American, Canadian and/or Japanese 6 strings 7 basses and a full studip of gear and if my opinion means FA then I can't help but not mention my Washburn Custom Shop WV548! It has Parker guitars (famous for the FLY) patented composite glass carbon fiber fretboard, EMG active PU's (81, 85) and a real Floyd with the Buzz Feiten system and it is bar none, the fastest, smoothest, and by far the nicest playing (and sounding for that matter) guitar I own or have played in my some 30 odd years plus, playing electrics.
“Tone that emulates the human voice is always more accessible,” Waara continues. “Otherwise, purely electronic music would have taken over, and we wouldn’t be making guitars anymore. There are some absolutes in human DNA about wanting to feel connection and that’s probably a fuller frequency tone, that’s tone that is more reminiscent of the human voice. Or, for instance, a violin or organic instruments that have been around for hundreds of years. When we talk about guitars having an organic quality, it’s because that’s rooted in what human beings know. Which is air moving, wood vibrating, people speaking.”
With an amp rated at 15 watts and an 8-inch speaker, the Spider Classic 15 is more or less in the same power class as the Champion 20. Like the Fender, it also has a 3.5 mm line input for connecting a smartphone, so guitarists can play along with recorded music or a music instruction app, plus a ¼-inch headphone/recording output, a built-in tuner, and a jack for an optional footswitch that switches between clean and distorted tones.
If you see a "\n/," where n = some number, perform a tremolo bar dip. Quickly hit and release the bar to dip the note's pitch. The number between the slashes gives an indication of the pitch you should dip to - dip the pitch by "n" semitones (a semitone is the same as the pitch between two adjacent frets.)[1] For instance, "\5/" means to drop the pitch by 5 semitones, which will be the same tone as 5 frets below the original note.
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.

Epiphone was once among the most significant competitors of Gibson. Later on, Gibson acquired them and, now, Epiphone form sits budget-friendly. However, the popularity of Epiphone as one of the best electric guitar brands was always there owing to their affordability and near to top-notch quality. Thus, choosing an Epiphone Les Paul guitar doesn’t mean you have to compromise much on the tone and specs. In fact, you get a guitar with specs comparable to Gibson – that too – on a much cheaper rate.
Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.

The 1964 TRG-1 was a slightly more asymmetrical variant of the WG body style, with offset double cutaways and offset waists. It had the squared-off Bizarro Strat head introduced in ’63 and rectangular-edge fingerboard inlays. The tail was a primitive top-mounted trapeze. Most of the face of the guitar was covered with a large metal pickguard, which had one two-tone neck pickup. The volume and tone knobs were above the strings, as was a small sliding on/off switch for the amp. In the off position, the guitar played out as a normal electric guitar. Horizontal grill slots were cut into the pickguard, behind which sat a 3-inch speaker. The amp operated on two 9-volt batteries installed in back. The TRG-1 shown in the subsequent ’64-65 catalog had a new, hooked headstock, but all the examples I’ve seen have the squared-off Bizarro Strat head. Also, the model I have has a TRE100 designation on the back sticker, so at least some were called this.

This is a good list although after owning most of these brands or at least having played all of them, I would re-rearrange the order. Gibsons although a good guitar are simply no longer the quality of Taylor or Martin. They are lagging behind these guys. Yamaha and Epiphone despite online "reviews" are also not near a Taylor or Martin for that matter. So I would drop Gibson, Yamaha, and Epiphone down the list, and although Seagull makes a decent guitar, they are no better than Blueridge, so I would drop them down and bring Blueridge up. Of course this is all subjective, but here is my list re-ordered for what its worth.

This right handed 6 string guitar is just so incredible. It is renowned to have been built in high expertise, from a brand that has been in the market for quite a long period of time. It has advanced  frets that make it unique in terms of sound and tune produced. It is quite easy to set up and operate, making it suitable for beginners. The  main reason is the price which is also relatively fair, ranging from around INR 3,999. Find more on:

While modified four-stage phasers like the Uni-Vibe and other effects before it had sought to evoke a choral-like sound, the chorus pedal as we know it didn’t arrive until affordable short-delay chips became widely available in the late 1970s. This in itself implies that chorus is a type of delay, and indeed it is, but the sonic results of the ways in which these short delays are transformed lands the effect firmly in the modulation camp, so it’s easiest to consider it as such (the function of these delay chips will be explained in more detail in the Echo & Delay section down the road). IC-based chorus effects work in a manner very similar to flangers, detailed above. The main difference, put simply, is that the short delays used to create harmonically spaced notches and peaks in the frequency spectrum are manipulated to modulate more tightly above and below specific frequency ranges, rather than shifted to swoosh broadly up and down the entire spectrum. The result, and intention, is a sound like a group of singers or similar instruments, where some voices/strings inevitably waver slightly from those beside them, producing a quivering clash of harmonics that evokes space and dimension when used subtly. The effect is possibly best heard—as pure effect, at least—in stereo, and the nature of the beast lends itself readily to stereo outputs. The broad soundstage and Doppler-like movement a good stereo chorus can spread out before you between a pair of spaced amps or L-R headphones make it one of the most spacious, three-dimensional effects available, short of long delays or cavernous reverb settings.
Compressors are often applied to electric guitar tracks to bring out the guitar’s natural sustain, as well as even out the overall dynamic range. Lead guitar parts usually benefit from a degree of compression treatment, while heavily overdriven rhythm parts often require very little or none at all, as the distortion naturally provides its own type of dynamic control. In the case of unnatural sounds, such as electric guitar, compression becomes a highly subjective topic, so experimentation is key to achieving the desired effect. As a starting point, therefore, try medium-fast attack and release times – an extremely fast attack time will blunt the transient response of the note. Remember that electric guitars can be inherently noisy and compression will generally exaggerate any hums and buzzes.
Why Martin electric guitars have never been more popular isn’t too hard to figure out. Martin, whose expertise has always been in top-notch acoustics, never really put a lot of effort into marketing its electrics. They were always well made, and, especially in the necks, clearly “Martins.” In the final analysis, however, it probably comes down to being victims of the success of their acoustic brothers, and players have just never seemed to warm up to the idea of Martin “electric” guitars. For the savvy collector with a taste for quality and relative rarity, Martin electrics remain excellent and attainable prizes.
I just purchased a Lyle acoustic guitar in excellent condition. It's Serial # 204 and Model # 712. The top of the guitar says Lyle with a gold cross-like design up by the tuning keys. It looks like it was painted on the wood by the manufacture. The top tuning key head and neck are the color of milk chocolate with pearl-type fret inlays. The body of the guitar is a light tangerine color showing the natural wood grain under the clear lacquer finish. It has a dark chocolate bridge, and a black pick guard with a white pearl engraved inlay of a floral sprig or vine-type design. There is a set of three circles around the center opening (1 thin black line, a wide band of black and white lines and another thin black line. It has light tangerine and milk to dark chocolate stripped sides and back which is the natural wood grain showing through the clear lacquer finish. JAPAN is engraved on the back of the tuning key head in back.

Although the electric bass was invented in the 1930s by Paul Tutmarc, his new instrument did not sell well. It was not until Leo Fender developed the Fender Precision electric bass in 1950 that this new instrument took off in the marketplace. Unlike the upright bass, a solid-body electric bass does not produce acoustic sound from a hollow body; while an upright bass player often benefits from using a bass amp, a bass amp is a necessity for an electric bass player.
Large-diaphragm models are popular, with Neumann mics particularly favoured. The famous U87 studio workhorse is probably the most commonly mentioned, but it's by no means the only contender. Eddie Kramer, Steve Albini and John Leckie single out its predecessor, the U67, for example, while both of the earlier U47 models (valve and FET) receive name checks from people such as Steven Street, Glenn Kolotkin, Butch Vig and Bruce Botnick (note that U47s were marketed under both Neumann and Telefunken brand-names, but they're essentially the same mics). Neumann aren't the only game in town, though: AKG's C414B-ULS is probably joint most popular large-diaphragm model alongside the U87.
The explanation for this "asymmetrical" tuning (in the sense that the maj 3rd is not between the two middle strings as say in the tuning of the viola da gamba) is probably that the guitar originated as a 4-string instrument (actually an instrument with 4 double courses of strings, see above) with a maj 3rd between the 2nd and 3rd strings and that it only became a 6-string instrument by gradual addition of a 5th string and then a 6th string tuned a 4th apart:
Modelling effect – Many BOSS modelling effects use COSM or Composite Object Sound Modelling, which uses computer-processing power to digitally precisely model the electronic, mechanical, and magnetic characteristics inherent to an instrument, amplifier, or speaker, and also to create completely new sounds. Modelling effects can be dynamic or time-based – it can even make your guitar or amp sound like a completely different type of guitar or amp.
Then there's the obvious fact that wood has no magnetic properties, so it's simply impossible that any acoustic vibrations from the body will have any effect on the amplified sound. It's also not true that any acoustic qualities of the body wood are somehow imparted back to the vibrating string; the vibrations go out into the air and, well, that's it. They're a by-product, nothing more.
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.

You should try the compressor after the overdrive stage. Providing an already compressed signal to a drive/distortion pedal doesn’t allow the full dynamic range of the pedal to be applied to the raw guitar signal, losing something of the capability or unique nature of these pedals. You can also lose the touch sensitivity of the drive pedal when the input signal has its louds softened and it’s quites upped. Placing the compressor after drive pedals allows the full driven tone to then be leveled dynamically with the compressor. Note that may drive and distortion pedals will include their own natural compression so addition of compressor after the drive pedals allows for fine tuning of the overall compression. It’s worth experimenting with.
Here, in this mini guide to acoustic guitar body types, we’ll aim to show you some of the key differences in size, shape, sound and suitability between the major variations of guitar. We’ll look at the history of some of the better known body types, and make recommendations according to the sound you’re going for and the style in which you play. So whether you’re a wispy finger-picker or a hearty strummer, we’ll explain some of the more intricate details of acoustic guitar body shapes.
Used as a send effect, a resonant filter can be used much more creatively than as an insert.You get very different results from your filtering depending on where you put the filter in the signal chain. To introduce some real movement into delay lines, for example, place sweeping low-pass filters before the delay. You then get the movement of the dry sound contrasting with the movement in the delay line. If both the filter sweep and the delay lines are tempo-sync'd, you can create interesting effects where the filter appears to be moving up and down at the same time.
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
SOLD OUT: ASK we may have another in stock Here we have a wonderful example of the Alvarez answer to the classic Martin 000-18 now famously linked to the Eric Clapton version from Martin om guitar today. Imported to the US by Saint Lewis Music 36 years ago. This fine example of the Alvarez 5014 is in excellent vintage condition you will not believe that she is over 36 years old when you see this in person you will realize it has been amazingly well cared for these past 3.6 decades. Its fit and finish is excellent as is its play action / neck angle ... this guitar is a pleasure to play and is truly EASY on the eyes... The neck is 1-11/16" at the nut and very comfortable to play with very little visible play wear to fingerboard or frets one will notice that this example is WELL above average condition for this age of guitar its really rare to see. Its beautiful SITKA SPRUCE top is solid and the back and sides are excellent grade Mahogany as is the neck please refer to the pics ... with nice details like its herringbone rosette, celluloid tortis pick guard, exotic Brazilian Coral Rosewood headstock overlay this guitar is more fancy than the other 5014's we have had and is in near mint vintage condition. The woods are well aged and the tone and volume has nicely opened up and aged like fine wine it takes time... a lot of guitar for this kind of price. Crafted in Japan over 36 years ago and kept in Amazing condition all these years just for you... Nicely set up with a NEW Martin Bone Nut & compensated bone saddle here at JVGUITARS. get this gem before she's gone! questions let me know... jvguitars@gmail.com .
Choruses (Chori?) come in mono, stereo, and true stereo versions, and a good one will provide lots of control across the depth and speed of the modulation desired. In the case of a mono unit, the aggregate tone produced by the circuit is flattened and passed through a single jack, where as a stereo (sic) unit will pass wet and dry signals through different jacks. A true stereo chorus unit will produce a true stereo signal, where the effect is mixed properly into left and right channels.
There was a time when Yamaha were thought of as just a guitar maker for students and beginners - but those days are long gone and Yamaha now produce quality acoustics that compete favorably with the best in this category. The LL16 is a great example, with it's all-solid wood body and built in pickups with preamp, this is a true workhorse instrument. Having premium level specs at mid-tier pricing is like a dream come true, the main reason why we consider the LL16 as the best value for money acoustic in this section.
The Gibson style guitars generally have shorter stubbier necks, with a 233/4 inch scale length, which suits some but not all. The Les Paul, the quintessential model, boasts twin humbucking pick-ups which effectively reduce noise and produce the thick, warm tone associated with Gibsons. It is difficult not to be impressed by the tradition of Les Paul guitars. No-one will ever convince me there is a better looking guitar style. For under $1000 the Epiphone Les Paul Standard will give you a little bit of the legend to take home and for many that's a good enough reason to buy one. Epiphones are cheaper factory made versions of the Gibson USA range. For those who learn on Gibson style guitars the Les Paul is what all guitars are measured against.  more...
An excerpt: “Scorned, laughed at, jeered, chided, and derided. The concept of the solidbody electric guitar was subject to such utter disdain in some corners that it’s almost hard to believe it ever came to be at all. The ridicule and mockery would have been enough to send a less self-confident inventor running for the hills. Given our more than 55 years of perspective, though, we know it just had to be; a world without the solidbody guitar? Moreover, without the Gibson Les Paul? Unthinkable ...”
Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
Gibson ES-335 Figured Electric Guitar The Gibson ES-335 thinline archtop semi-acoustic electric guitar is a popular choice among blues, rock and jazz musicians because of its warm tone and near-zero feedback. The 2019 Gibson ES-335 Figured model features a thermally engineered chambered maple center block, a hand-wired MTC Premiere control assembly, an ABR-1 bridge with titanium saddles and all-new MHS II humbucking pickups.
{"pageName":"[mf] pdp: epiphone les paul special vintage edition electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"silver,36-month,24 month","prop5":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";J40301","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] product detail page"}
Matsumoku is one of the Japanese manufacturers that did not survive long after the heyday of the 1970s guitar market despite having a long tradition of quality stringed instrument craftsmanship. Matsumoku produced guitars for major manufacturers Greco, Guyatone and Yamaha. Matsumoku made Arai, Aria, Aria Pro II and Aria Diamond badges, with Aria being their primary badge for a majority of this time frame. Badged guitars known to have been made by Matsumoku include Apollo, Arita, Barclay, Burny, Capri, Columbus, Conrad, Cortez (electrics only), Country, Cutler, Dia, Domino, Electra, Epiphone, Granada, Hi Lo, Howard, Ibanez, Lindberg, Lyle, Luxor, Maxitone (this guitar differs from Tama's Maxitone badge), Mayfair, Memphis, Montclair, Pan, Pearl (electrics only), Raven, Stewart, Tempo, Univox ,Vantage, Ventura, Vision, Volhox, Washburn (in 1979 and 1980), Westbury, Westminster and Westone. Possible Matsumoku badges include: Bruno, Crestwood, Conqueror, Eros, Mako, Memphis, Orlando and Toledo.
The AEG10II combines laminated spruce top with mahogany back and sides, and packs both in a thin profile body. Thin bodied guitars, while more resistant to feedback than their larger counterparts, don’t have the breadth of tone or the volume of a full sized acoustic guitar. The cool thing about this guitar is that, it’s one of the cheapest ways for beginning musicians to get a solid gigging instrument.
I signed up for the Free GuitarTricks Trial and the first lesson that I checked out was titled something like “Blues Style Level 2 – How B.B. King Starts The Blues”.  You wouldn’t believe it. Shortly after starting this lesson I felt that my playing sounded the way it should be sounding. It sounded kind of the same as how B.B. King sounded. I was over the moon. This was simply an amazing experience and I never looked back. Today I am almost sure that I would probably be a Rock Star today if Guitar Tricks would have been around 20 years earlier ;-).
Depending on the components used in the delay pedal, delays can either sound exactly like the original source sound, or the delays can sound like they have a modulation effect on them. In fact, some of the most popular delay pedals apply a phaser modulation effect on the repeated delay sounds. Stacking different effects on top of one another in a single pedal is not uncommon at all, and delay pedals typically have some other effect added-on.
A musician's pedalboard can be a cluttered place, with lots of stompboxes all competing for room, not to mention creating a virtual spaghetti of patch cables. Wouldn't it be nice to swap out some of those pedals in exchange for a single unit? Of course it would, and that's why multi effects pedals exist. With one of these babies at your feet, you'll have multiple pedals in one. That does more than just clean up the visual look of your effects loop - it also makes your pedals easier to manage and use, and if you're a beginner, you'll appreciate how much simpler it is to put together your board with the most common effects all gathered in one unit.
The Effie U1935 thinline hollowbody ($220) was a bolt-neck ES-335 copy with a bound rosewood fingerboard, blocks, open book head with outlined logo decal, two 12-pole/slit humbuckers, finetune bridge, fancy harp tailpiece, three-way on the treble cutaway horn, elevated pickguard and two volumes and tones. The Effie was available in orange sunburst, cherry red or jet black. It is entirely probable an earlier version of this existed, since thinline versions of the ES Gibsons were already mainstays in Japanese lines by ’68. If you find one with the old plastic logo, don’t be surprised.
Any experienced professional guitarist will tell you there’s usually a big difference between what works on the live stage and what works in the studio. Most discovered early on that the carefully honed live tone they were so proud of just didn’t work on the recorded track, for any of several reasons, or not without a lot of tweaking and readjustment, at least. The first thing you’re likely to discover is that it’s a lot harder to record satisfactory overdriven and distorted guitar sounds than it is to record clean or mildly crunchy sounds, a revelation that often goes hand-in-hand with the fact that big amps tend to be more difficult to record satisfactorily in general.
Healthy forests are vital to all of us, for many reasons. We must preserve these precious resources for future generations. To that end, Oregon Wild Wood strives to provide only salvaged wood, trunks and stumps left behind from old timber harvests, trees that have died and/or must be removed, trees from commercial groves that become unproductive, and even wood salvaged from old buildings and structures. Your next guitar can be a source of pride in yet another way.
Since affordable guitars are designed for students, manufacturers know that playability is of utmost priority. This is the reason why many of these budget-friendly guitars don't stray from familiar neck and body measurements. This ensures that they feel as close to premium guitars as possible, albeit utilizing more cost effective materials and production methods.

Power amps are rated in volts and generally come in .7V, 1V, and 1.25V. Most preamps don’t produce strong enough output to power a 1.25V. Most manufacturers don’t rate the average output of their preamp which makes things even harder in determining compatibility. What you can look for is the “line level“, “dBu”, or “dBv” information when researching this aspect of your acoustic electric guitar.
*The expensive Fender USA hardware (supposedly genuine, purchased at Guitar Center San Marcos CA), which includes the 2-point delux strat tremolo, big-apple scratch plate, Sperzal USA tuners, Graphtech nut, and pickup selector. These items should all combine to sound awesome, and coming from a reputable supplier and for the price I paid I would expect to be identical to what is found on a USA standard or delux Fender.
Original plate reverbs were mechanical in nature. There was a literal plate inside the amplifier, which would transform input signal into vibration. Then you would have a pickup located somewhere near the plate, that recorded those vibrations. Today, such a contraption comes across as relatively crude, but many still love the unique mechanical sound it produces. Spring reverb uses a pretty much exact same principle, only this time you have a spring in there instead of a plate. The biggest improvement a spring reverb offers is reduction in both weight and size of the device.
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]
I've had it for a few months and have been using it at shows. It has become erratic. The patch I use most often occasionally oscillates. It's like microphonic feedback (not guitar sustaining feedback). The output level seems to change on it's own as well. I will say I found an amazing sound with the marshall 800 emulation but the inconsistency makes it unusable live. It is possible it's not the unit but a power supply problem or connection, but I have not seem the power go off and other devices on the same power supply work fine. I have ordered the digitech 360xp since I had used that brand for 15 years or more with no issue.

The HOF is one of the single best examples of a convergence of price and quality features that we've ever been able to find. While we can't mention pricing in this article, we'd recommend clicking through and checking the retail price on the HOF, then comparing it to the other reverb pedals in this list. As far as value, the HOF is nearly a perfect 10.
The aim of Audio Issues is to help interested newcomers get started in the world of audio production with easy to use practical audio production tips for beginners and advanced. If you are just starting out doing some home recording or have been engineering for a while, these quick and easy audio tips are guaranteed to be of interest and use to you.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series. http://www.voxamps.com/AVSeries
Like many others, Reinhold Bogner (born in Ulm, Germany, like the EL84 tube!) started his career with Fender mods. He founded his company in 1989 in Los Angeles and succeeded in earning a reputation among guitar amp manufacturers. His brand became famous with models like the Ecstasy 100A and 100B, where "A" stands for American (with 6L6 tubes) and "B" for British (with EL34 tubes). Among its famous users, you'll find Steve Stevens and Steve Vai (apparently your name must be Steve to be Bogner's friend).

This is one of the coolest guitars to come out of the Gibson Custom Shop: 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Faded Cherry Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Faded Cherry.
With JH’s encouragement, I’ve made the decision to produce my own line of premium acoustic guitars, handbuilt as before, to the same high quality, and with an extended option list including other rare woods, finishes, and trim options. The brand I will be using is “Madeleine”, in honor of my late granddaughter who passed away May 2, 2011 at age 1 month.
The full-size Davidson guitar features a maple fretboard consisting of strings that sound very pretty good once you have tune it right out of the box. This Davidson full-size electric guitar comes with die cast tuners designed to keep it in perfect sound shape, followed by a practice amp having an overdrive body, which makes the practice exercise easy and fun-filled. The amp can be tuned with an iPhone App and by the time you set this baby to work, you will surely get your neighbors screaming for the peace.
The electronic transistor finally made it possible to cram the aural creativity[when defined as?] of the recording studio into small, highly portable stompbox units.[citation needed] Transistors replaced vacuum tubes, allowing for much more compact formats and greater stability.[citation needed] The first transistorized guitar effect was the 1962 Maestro Fuzz Tone pedal, which became a sensation after its use in the 1965 Rolling Stones hit "(I Can't Get No) Satisfaction".[41][42]
I have 12 years whit my SL3 Jackson and 12 years whit my RG7420, so far I have replaced both POTs on the jackson, the frets are really worn out and FR chrome is peeling.. great guitar crappy components. oh, I havent had to replace anything on the Ibanez yet other than the stock pickups for something better. both are made in Japan =). So dont tell people that Ibanez sucks before actually owning one...
As an example of pre-distortion EQ, Eddie Van Halen places a 6-band MXR EQ pedal before the Marshall amplifier head (pre-distortion EQ). Slash places a Boss GE-7, a 7-band EQ pedal, before his Marshall amp. This technique is similar to placing a Wah pedal before the amp's preamp distortion and leaving the Wah pedal positioned part-way down, sometimes mentioned as "fixed wah," (pre-distortion EQ), along with adjusting the amp's tone controls (post-distortion EQ).
Every working guitarists knows that if he doesn't have a good guitar doctor, his dreams of being a master shredder who destroys the crowd with rakes from his pick as he slides it up the string are dead. From a broken headstock to a cracked neck, a guitar technician is a master of skills. He's an electrician, a plumber, a physician and a surgeon. But if a guitarist wants to shoot fireballs out of his guitar, he'll need more than just a technician; he'll need a guitar master.
Well that and the effects, but Ample Sound even admits that the effects aren’t the greatest and recommends using another plugin for effects. Them admitting that might put a sour note on your tongue, but when you’re buying a VI in this price range, often it’s better to go for a plugin that is a master of a few components instead of one that attempts it all.
A one of a kind 6 stringed electric guitar that is right handed and mostly comes in black. The body is made of bass wood where as the fret board is made of maple. The neck also consists of white dot inlay. The product price ranges from about 15,350.00 which is quite cost effective considering the adorable features of the guitar. More information concerning the product can be found by clicking on the following link.

The first thing that you’ll notice is that the PR5-E is a florentine style guitar, which means that it has that fantastic looking cutaway with a really dramatic horn. This gives you nice access to the upper frets while retaining some resonance. The result is some really nice tone for such an affordable guitar. What’s more is that it’s a slimline design. It is an incredible sounding instrument.
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
Great article and very enlightening comments too. One thing I’d like to add is that it seems to me that a considerably large expense is necessarily involved in going the ampless route i.e. Axe FX + midi controller at the least, in an Axe Fx setup. Granted, amp setups can be just as expensive or more expensive, but cheaper amp options are available.
This is one of our favourite cheap electric guitars and it certainly doesn’t suck thanks to its Alder body, comfortable “C” shape neck, snappy maple fingerboard and two Vintage-Style Single-Coil Tele pickups to provide that awesome tele twang. If you’ve always wanted a Telecaster and are just starting out in the world of guitar, this is a dream beginner’s guitar that is budget friendly and still completely high quality.

Mr Swike appears to know what he is talking about, and has undertaken a body of work that is unfortunately for sale while only being 70% complete. Some of the instructions are incomplete (like showing what North polarity looks like on Stew-Macs polarity tester, but not South), and at least one (the Varistor mod) wildly inadvisable. Why not get the book done, checked out by objective professional parties, and then released as a complete reference book?
There’s been a steady evolution in effects signal processing since the 1940s. Guitarist-innovator Les Paul was among the first and most avid effects developers, experimenting with echo and multi-track recording to add sonic excitement to his music. The first foot-switched effect showed up in the late ‘40s with Harry DeArmond’s Trem Tol tremolo processor that was later used by Bo Diddley. In the 1950s and early 1960s other effects were developed, but they tended to be expensive and some had operational issues. Meanwhile amplifier makers such as Fender and Gibson were building reverb and tremolo effects into their amps. These tube amps also produced tasty distortion and overdrive effects when gain and volume were cranked up to maximum settings. Today, many effects are designed to reproduce those sounds.

The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
This Japanese company produces a wide range of musical instruments, but the real draw for guitarists will be with beginners and intermediate players. Yamaha offers a solid selection of products at a price that is more budget friendly than some of the other entries on this guide, making it a good place to start for players getting their first guitar.
John and I weeded out a couple of guitars that arrived in far-from-playable condition because we think every guitar should be at least reasonably playable when you buy it. Avi Shabat agreed, saying, “The more messed up a guitar is when I get it, the more I have to charge for setup.” We also didn’t have the short-scale guitars set up, for two reasons: First, we think a guitar for kids—one that’s likely to be purchased at a low price and given as a present—should play acceptably right out of the box with no setup; second, all of the short-scale models we received did play very well out of the box, and all were equipped with strings of the same approximate gauges.
John Mayer and Frusciante are very talented guitarists, but to include them at the expense of legends like Clapton, Duane Allman, Neil Young, The Edge, Brian May, George Harrison…that's unforgivable. I'll admit that Jack White needs more time to prove himself too, but of all the recent guitarists listed, he is the one with the most vision and confidence in his ideas. He is his generation's Jimmy Page.
Two more guitars were introduced in 2008. Gibson USA issued the Slash Signature Les Paul Goldtop, modeled after a 1991 Gibson Les Paul Goldtop that was stolen from Slash’s collection in 1999 and never recovered.[37] It features a mahogany body and a hand-carved maple top with Gibson’s classic Bullion Gold finish. Production was limited to 1000.[38] Epiphone introduced a more affordable version of the Gibson model, featuring a traditional Les Paul body with a maple top, a mahogany neck with rosewood fingerboard, and Epiphone’s classic Goldtop finish. Production was limited to 2000.[39]
A. Musical instruments, especially acoustic and electric guitars, are routinely pawned for short-term loans. Buyers prepared to pay cash can sometimes find high-quality acoustic guitars at pawn shops, but there are no guarantees on condition. Furthermore, the seller may or may not be able to provide any technical information or additional accessories.
Steve is the best. He made time for me to come in and talk about the problems I was having with my electric bass. When I got there, he knew exactly what was wrong with my bass, and he adjusted it quickly and perfectly. He also gave me a lot of incredibly useful information about what he was doing and why. I could not recommend Steve Morrill more highly.
A typical modern guitar tube amp has both a preamp stage and a master power amp output stage. The preamp section will be supplied with a set of smaller tubes (frequently 12AX7 or the lower-gain/lower noise 12AU7), and the power amp section has a set of large tubes (EL34, EL84, 6L6, etc.). The preamp controls input gain and typically provides treble, midrange and bass tone controls.
Peavy amps are especially well appreciated by the metal community, thanks to their good overall reliability and the high volume of sound some models produce. The 6505 Series is a favorite of metal guitarists due to its power and versatility. This is most often used as a head for double stacks of speakers, but it can also be purchased as a 2×12” and 1×12” combo for convenience.
The Fender T-Bucket 300 is a cutaway dreadnought guitar that comes with a stylish design and an incorporated pickup system for easy amplification. This instrument comes with a laminated maple top that features a Trans Cherry Burst finish. With quarter-sawn scalloped X-bracing, this guitar offers superior resonance and playability even as time goes by.
Launch price: £849/€850/$999 | Type: Amp modeller/multi-effects pedal | Effects: 116 | Connections: Input jack, main output (L/MONO, R) jacks, SEND1 jack, RETURN1 jack, SEND2 jack, RETURN2 jack: 1/4-inch phone type - Sub output (L, R) connectors: XLR type - Phones jack: Stereo 1/4-inch phone type - CTL4, 5/EXP2 jack, CTL6, 7/EXP3 jack, AMP CTL1, 2 jack: 1/4-inch TRS phone type - USB port: USB B type - DC IN jack - MIDI (IN, OUT) connectors | Power: AC adaptor
Takamine GS330S: Like Yamaha, Takamine is a Japanese guitar company. They also have low price Jasmine series for beginners. I don’t recommend you buy Jasmine series if you have enough budgets because Jasmine has a laminate top. Go for the GS330s, it has a solid Cedar top, cedar is a kind wood that make better sound when aged. So if you buy Takamine GS330S and keep it for a long time, the guitar will sound better and better. For more details features and price, check out here.

In a band and got your slot to wail? Think about it. Shredding scales is all well and good but the best songs and solos have structure, tempo changes and memorable licks. It may be a cliché, but listen to Jimmy Page’s solo in Led Zeppelin’s “Stairway to Heaven” – now that’s how you build-up to a solo. It may be your time to shine, but don’t just gush everywhere – think about structure and let your solos build and breathe.

A passive pickup doesn’t produce a very strong signal, which can result in a small amount of volume and an anemic tone. However, the signal can either be boosted at the p.a., your amp, or the most versatile option' via an Acoustic Preamp. Active pickups don’t require any external technology to boost, though they do require a battery, but some people still use acoustic preamps for the tone shaping and DI benefits..
Let’s get it straight. Froo – Shawn – Tey. If you don’t know him, he’s the lead guitarist of the Red Hot Chili Peppers. Frusciante is the author of the brilliant chord progression on Under the Bridge, the haunting intro to Californication and the simplistic solo and riff on Otherside. If you’re the casual listener of the Chili Peppers, then you may wonder why John has made it so far up this list. But a tad of a closer look will reveal that his simple catchy riffs are the tip of the ice berg. One can catch a glimpse at his technical skill in the Dani California solo. A bit deeper and you’ll run into Lyon 06.06.06 in one of the B Sides. John takes his influences (Page, Hendrix) and mixes his own nuances into a sound that’s pleasantly different, but melodically having the same effects on you. A track to look out for on his solo work – Ramparts – showcasing four or so guitars layered upon each other in an introspective orchestra.

On top of that, the Champion 20 offers built-in effects, including reverb, chorus, flanging, delay, auto wah, vibrato, and tremolo. All of these effects can be chosen using a single knob, with an additional FX Level knob to control the mix of the unprocessed sound with the effect. These effects can’t match the flexibility and adjustability of separate effects pedals—for example, with the exceptions of reverb+delay and reverb+chorus, effects can’t be combined—but they can at the very least give beginners an idea of how these effects work. Many guitarists may find the Champion 20’s built-in effects to be all they need.
Randall deserves to be up here in this list. Don't get me wrong, they've got a lot to contend with, in Orange and Mesa Boogie in particular, but Randall have always crafted excellent amps. Rugged build and vast tonal opportunities make this brand a mighty force, I mean they were good enough for Dimebag Darrell and countless others, enough said really...
Beginner amps aren’t going to be packed with features, but they should include good clean and distortion sounds, plus a decent EQ layout to shape your tone. Part of your journey as a newbie guitarist will include discovering what tones you like and don’t like, and that’s hard to do with a cheap amp that only produces one generic sound. If your first amp has some reverb or onboard effects, that’s a bonus.
Half a step down from standard tuning. Used by bands/artists such as: Jimi Hendrix, Coheed and Cambria, Black Sabbath, Motörhead, Cannibal Corpse (Chris Barnes era), Nirvana, AFI, Rise Against, Failure, Weezer, Green Day, Kiss, The Hellacopters, Backyard Babies, Guns N' Roses, Neil Young, Van Halen, Brand New, Blind Guardian, Metallica (on the "Load", "Reload" and "Garage Inc." albums, "The God That Failed" and in live performances of standard tuned songs since 1995), AC/DC (some songs and in live performances of standard tuned songs since 2008), Slayer, Alcest, Rage Against The Machine, Stevie Ray Vaughan, Yngwie Malmsteen, Alice in Chains, The Smashing Pumpkins, The Killers, Relient K, Suede, RED on "Not Alone", Beach House, Third Day (on "I Can Feel It"), Die Ärzte (since "Geräusch") Skillet (on "A Little More"), and Vertical Horizon, Tyler Bryant & the Shakedown.

While many individuals who want to become guitar technicians dream of working with big-name bands, it is more realistic to work with smaller bands first to gain experience. Local bands often need extra help with many of the technical aspects of show production. Techs may be asked to perform other tasks besides guitar maintenance, such as stage set-up and breakdown, driving the tour bus and selling merchandise. All of these activities can provide techs with invaluable knowledge regarding staging live performances.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!

A small number of bass amps designed for the upright bass have both a 1/4" input for a piezoelectric pickup and an XLR input for a condenser microphone mounted on the bass, with a simple mixer for combining the two signals, as described below. Some Acoustic Image amps have a dual input design. A rare feature on expensive amplifiers (e.g., the EBS TD660) is the provision of phantom power to supply electrical power over the patch cable to bass pickups, effects, a condenser mic (for an upright bass player) or other uses. A small number of 2010-era amps that have digital modelling features may have an input for a computer (e.g., USB), so that new digital effects and presets can be loaded onto the amp.

"Soft clipping" gradually flattens the peaks of a signal which creates a number of higher harmonics which share a harmonic relationship with the original tone. "Hard clipping" flattens peaks abruptly, resulting in higher power in higher harmonics.[37] As clipping increases a tone input progressively begins to resemble a square wave, which has odd number harmonics. This is generally described as sounding "harsh".
We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!
Distortion and overdrive: Distortion and overdrive units re-shape or "clip" an audio signal's wave form so that it has flattened peaks, creating "warm" sounds by adding harmonics or "gritty" sounds by adding inharmonic overtones. In tube amplifiers, distortion is created by compressing the instrument's out-going electrical signal in vacuum tubes or "valves".[52][53] Distortion pedals produce perfectly flattened peaks or "hard" clipping. Overdrive pedals produce "soft” tube-like distortion by compressing the sine wave without completely flattening it. Much like tube amps, overdrive units produce "clean" sounds at quieter volumes and distorted "warm" sounds at louder volumes. Distortion and overdrive pedals may either be transistor-based or digital.[54][55] While distortion pedals are most associated with electric guitar, they are also used with bass guitar (fuzz bass), Hammond organ and electric piano.
Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.
Tremolo can be a subtle effect, as heard in “Born on the Bayou”by Creedence Clearwater Revival and Gimme Shelter by The Rolling Stones, or more distinct as heard in “Crimson and Clover” by Tommy James and the Shondells and “Bones”by Radiohead. Tremolo has been around since the earliest days of the rock era, and was popular with rockabilly and surf guitarists.
Brian Moore - Known for their innovative custom electronics and distinctive designs, Brian Moore Guitars continue to produce guitars that go beyond the conventional. Aside from their custom-built instruments, they now carry a host of artist signature models. One of their more popular products is the iGuitar, which feature acoustic MIDI, piezo, 13 pin Synth and more.
The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
Better known simply as an acoustic guitar, the “steel” strings (they come in all kinds of construction, not just steel) are louder and brighter, and a much more versatile instrument to play. Folk, rock, jazz — acoustic guitars have it all covered. Those steel strings also chew the ends off your fingers until eventually you develop hard calluses on the tips — very handy for plucking boiled eggs out of the saucepan.
Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.

I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.

The x99 is as Soldano as an amp can get; its purple! The X99 (a step above the 3-channel X88) is a unique MIDI-controlled preamp, featuring Tim Caswell’s innovative system of real-time-controllable motorized knobs. Modeled after the SLO, the X99 has got the Soldano character that everyone’s grown to love. If you find one, let us know! Like most discontinued Soldano’s, the X99 is virtually impossible to track down.
Six full steps (one octave) down from standard tuning. The Low E has the same fundamental frequency as a bass guitar, essentially the same standard tuning as a bass guitar but with a high B and E added to mimic a regular guitar. This tuning is used on the Fender Bass VI and similar instruments. Notably used by John Lennon with The Beatles, Robert Smith of The Cure and Jack Bruce of Cream. In his early days with Ronnie Hawkins, future Band bassist Rick Danko was also seen with a Fender Bass VI. This is the tuning Earth used on their seminal drone doom album, Earth 2. Also used in some Doom Metal and Sludge Metal bands such as Thou.
There are times when a single-coil just doesn’t have enough twang. I’ve encountered Strat neck pickups that are just too wooly to provide me with that saucy, SRV/Hendrix-style rhythm juice. Or, sometimes an anemic bridge pickup just needs an extra dose of snap to push it into Tele-like territory. If so, this simple mod could be just what you’re looking for.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
Engl is not particularly famous among US guitarists, and even veterans in the field might be unfamiliar with this hard-to-pronounce name. A good shorthand to give you an idea of what they’re about is to make a mental list of the features most readily associated with German products: good manufacturing quality, reliability, an adequate level of innovation (but only when needed) and higher than average performance.
Intonation is difficult since the bridge is a bar of metal with grooves cut into the top. The whammy bar works and provides a nice warble in a limited range. Action is a bit high at the moment, and adjustment is limited to bridge height unless I shim the neck (no truss-rod adjustment is obvious). Still, the short scale and light strings make it easy to play anyway.
The better-quality Japanese guitars of the mid 1970s to the present have rivaled the quality of many new American guitars of the same time period. It is worth considering, however, that the 1970s were almost without a doubt the worst period in the history of American-made guitars as well as numerous other American manufactured products. I am firmly of the opinion that no Japanese maker has equaled the quality of pre-World War II Gibson and Martin acoustic instruments or electric guitars by Gibson and Fender of the 1950s through the mid 1960s, but I would be quick to agree that a Tokai or Fuji Gen Gakki top-line instrument of the mid 1970s would be in many cases every bit as good and in some cases superior to Norlin-era Gibson and CBS-period Fender guitars. While "Made In Japan" had a connotation of cheap and mediocre quality in the 1960s through the early 1970s, by the end of the 1970s "Made In Japan" was often viewed by consumers of guitars and other products such as automobiles as being as good as if not superior to American. Some of the Japanese instruments have gone on to be viewed not only as being of fine quality but worthy of consideration by collectors. While I personally do not collect Japanese made guitars and do not deal large numbers of these instruments, I would certainly agree that many of them are of excellent quality and provide good value.

The Ibanez JEM77WDP Steve Vai Signature guitar features a rosewood top on a mahogany body. The maple and walnut neck with a slim Wizard neck profile is topped with a 24-fret rosewood fingerboard with jumbo frets and Tree of Life vine inlays. This model also has a striking wooden pickguard and matching headstock, as well as wooden control knobs, earning it the nickname “Woody.”
Lastly, we have the M-100FM. This guitar features a body that is similar that Super Strat style Ibanez is known for, packed with a great set of pickups. This is a mid range guitar, but one that is very capable compared to its immediate competition. If you need an axe that looks good and plays good as well, ESP LTD M Series M-100FM is the ESP for you.
The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies. 

This book emphasizes tabs with the accompanying music notation. It’s not a long book and one that a beginner will likely outgrow at some point. However, it provides a good introduction to get you playing songs you’ll recognize fast. It does a fine job of explaining everything the newbie needs to know including how to position yourself. Build those good habits early!

Picking out a guitar can be a bit daunting. And since there’s a lot of subjectivity involved, new players trying to pick out an instrument often find a lot of ambiguity and guesswork awaiting them. For someone buying their first guitar, the goals become fairly simple. Get a decent, budget guitar that you can afford and see if you stick with it. In so doing, avoid the worst guitars.
Categories: Gibson Guitar CorporationBanjo manufacturing companiesBass guitar manufacturing companiesGuitar amplifier manufacturersAmerican companies established in 1902Manufacturing companies established in 19021902 establishments in MichiganCompanies based in Kalamazoo, MichiganManufacturing companies based in Michigan1902 in musicCompanies that filed for Chapter 11 bankruptcy in 2018
Harmonizers blend the note from your original guitar signal with a note shifted to a preset interval. For example, you may set it to a Major 3rd interval and it will create a similar sound as if you played a root-plus-Maj-3rd diad. Harmonizers are pretty diverse effects, but using one correctly obviously means understanding a little about music theory and how scales and intervals work.
If you've NEVER heard of EZMix for effects, Impact Soundworks Shreddage 2 IBZ or Prominy V-Metal for guitar, or Alchemist Studios Texas Grind for bass, or Impact Soundworks Shreddage Drums for drums, then I would say you're right, (Amplitube 4 is out right now, by the way). You need Kontakt 5.5 for all of this to work though, so if you have this already you need to upgrade.
Third, the amp should be easy to use: If the controls are hard to figure out, they’ll likely frustrate those who’d rather spend their time playing than trying to figure out how their amp works. Also, every guitarist will at some point have to use someone else’s amp, so starting with an amp that has a fairly common control set will help you learn to dial in your sound when using an unfamiliar amp.

While Dave Matthews Band has no more confirmed dates on their schedule, Matthews and guitarist Tim Reynolds have a number of duo performances on the docket, including a slot at Farm Aid 2018 in Hartford, CT on September 22nd alongside Willie Nelson, Neil Young, John Mellencamp, Chris Stapleton, Sturgill Simpson, Kacey Musgraves, Margo Price, Nathaniel Rateliff & The Night Sweats, Lukas Nelson & Promise of the Real, and Particle Kid. Dave and Tim also just announced their return to Mexico for a concert destination event set to take place February 15th–17th, 2019.
This is a great DVD, and Keith's style is very laid back, and easy to listen to. You can't help but like the guy, and once you start watching the DVD, you don't want to stop. He is extremely knowledgable, and it is like having an instructor right there with you. The DVD begins with the very basics, and works up to some quite complicated playing, so there would be something in this for everyone, from complete beginners (like me) to those looking for more challenges with their playing. For the price, I don't think you can go wrong.
Les Paul created an early solid-body electric guitar in his spare time after work at the Epiphone factory in the early 1940's famously known as "The Log". It is believed that this was the first solidbody 'Spanish guitar' every built. He went on to develop the idea further until he took it to managers at Gibson sometime in 1945 or 1946 who immediately...
The AC15C1X is a modern take on the venerable AC15, with improved reliability and built-in effects. Vox's familiar clean and overdriven tone is ever present, courtesy of its three 12AX7 preamp tubes and two EL84 power tubes that drive a 12" Celestion Alnico Blue speaker - a speaker that many Rock and Blues players prefer. The amp has a dedicated Top Boost input for those who want Vox' distinct jangly tone. Finally, it comes with tremolo and reverb effect to add space and texture to your guitar tone.
The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.

If you’ve decided to make the neck from scratch, rather than purchasing it, you will want to cut that at this point. Make sure you are following specifications for how it will need to connect to the body. It’s best to cut the basic shape first and then refine.  You also need to hollow out space for the truss rod. Finally, for a rosewood fretboard, you will need to laminate the board to the neck.

Different forms of manipulation of similar bucket brigade delay chips were also at the center of the more advanced chorus and flanger pedals that emerged in the late 1970s. With ICs that themselves were capable of creating a controllable time delay in any given signal, the job of harmonically modulating part of a split, delayed signal to produce a warbling chorus or swooshing flange sound became a lot easier.

Entire contents Copyright © Musician's Friend Inc. Musician's Friend is a registered trademark of Musician's Friend Inc. All Rights Reserved. Publisher does not accept liability for incorrect spelling, printing errors (including prices), incorrect manufacturer's specifications or changes, or grammatical inaccuracies in any product included in the Musician's Friend catalog or website. Prices subject to change without notice.