Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
Along with these effects are 10 guitars: Strat Marshall, Valve ODX, Garcia Guitar, Bleeding Guitar, Blues Guitar, Power Guitar, Mondo Guitar, Synth Guitar, Clean Guitar, and Electric Sitar. The sound of each somewhat matches the guitar it’s supposed to be, but more importantly, there is a notable change in tone with each and since it’s free, I was happy just to have that.
Rule 1—There are no rules. The sound you’re after might not be made by what we could call the appropriate or logical signal path, but that’s not always the issue. The issue is this: what does it sound like? If it makes the sound you’re after, then it’s right…although, you may have to do something about the noise. Traditional pedal board arrangements were designed for certain reasons, and keeping the noise down is one biggie. Following the principles of how sound is made in physical space is another (see Rule 4 coming up). But the final choice is yours. As a very wise man said: if it works, don’t fix it.
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved sruce top, back is not carved but is arched by bracing, rosewood back and sides, unbound elevated tortoise pickguard, style 28 type multiple bound top and back with white outer layer, zipper zigzag backstripe, trapeze tail piece, rosewood fingerboard, vertical "Martin" peghead logo, nickel plated parts, sunburst top finish.
Even though Ibanez is thought of as a modern guitar brand, we have decades of accumulated knowledge and a history of pushing the boundaries. The AZ series carries with it all of the hallmarks of these tried and tested Ibanez qualities: the smooth oval neck grip, the well balanced asymmetrical body shape, and the neck heel allowing unrivaled playability.
Second, the right side of the pedal is a feedback controller and a series of knobs that allow you to adjust the Sonic Maximizer feature. This hallmark of the Acoustimax basically streamlines your guitar's tone, matching up the lows and highs of your acoustic's resonance and projecting them at the same time. Without this feature, the tone of an amplified acoustic can be inconsistent, projecting higher frequencies earlier than the low end resonance.
Synonymous in the electric guitar industry, the Gibson brand continues to produce some of the best electric guitars on the market, including the Les Paul Studio. Designed with a classic look that maintains the appearance of a vintage quality, this electric guitar comes with a neck that is slimmer than most traditional models, allowing for ease and smooth transitions when switching between notes. The guitar utilizes an upgraded version of humbucker PAF to cancel out any outside interference that detracts from the quality of the sound, while maple and mahogany wood are combined to deliver both definition and sustainability. Other features include traditional tuners that can be manually altered, a Graph Tech Nut for precise spacing between strings, and a neck heel with the class Les Paul design. Well reviewed and great for the price, the Les Paul Studio is one of the best electric guitars available if your cash flow allows.
went to great lengths to get here for a basic set up on a vintage les paul. after 3 months of long waiting guitar was no better off, it was different, but just as bad and completely unplayable. he may have spent 30 seconds tweaking the truss rod, but didn't do the necessary or requested fret leveling to resolve all the dead areas up high. unbelievable after 3 months to have a guitar unplayable after traveling such lengths to get here & back. when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier. i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
Everything about the shape and feel of the S6 Original is meant to be as close to familiar acoustic guitars as possible, including its playability, which is brought about by its 25.5" scale length, 1.8" nut width and 16" fingerboard radius. Tone wise, you're getting a crisp yet warm tone thanks to its pressure-tested solid cedar top, which also adds to the overall earthy appeal of the instrument.
{"id": "114572014", "categoryId":"site5AAG", "name":"Used S421 S Series Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/S421-S-Series-Solid-Body-Electric-Guitar-114572014.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"239.99", "priceMin":"239.99", "priceMax":"239.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"Ibanez", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"159269514523", "priceVisibility": "", "itemType": "Used"}
What every great guitarist does, with respect to sound, is achieve a very high level of nuanced control over the sound, not by having a computer play his guitar for him. As a keyboard player, I would recommend you first concentrate on playing your synth with lots of use of pedals, velocity-sensitive changes in timbre, and left hand controllers. Then you can experiment with all sorts of synth sounds. This way, you can play as expressively as a gutarist, but without sounding like a bad copy. Instead, you can sound like something different, new, and this is really where synth lead work can shine (and actually add to our musical lexicon).
You planned out your hardware but it is best to make the purchase after you know you have the body and neck built and made sure they will fit together. If you have made it to that point, you are ready to put in the hardware components. Realize that you may need to do some basic soldering. If you need some guidance in that area, you can get it in a free course on metalworking.
Perhaps the most popular choice though is a paper in oil capacitor. I have tried so many brands and options, and truth be told, it's very hard to notice a substantial difference and you can, unnecessarily spend a lot of money on premium ones. I received so many requests for a PIO equipped harness, so in an effort to try and whittle my findings down to a good value, tight tolerance and good sounding paper in oil capacitor, I've settled with one made by WD Music USA which are superb. Compared to other PIO caps on the market, they're a reasonable price and importantly are tight tolerance meaning the key details about how it will react with a tone pot, is accurately presented. Again, no real right or wrong here, if your budget allows you to go crazy on capacitor choices, no one can tell you not too. But truthfully, just pay attention to the tolerances, as that will tell you the most about how it will 'sound'. 
Leo Fender didn’t know how to play guitar. The inventor of the famous guitar brand, which includes the Telecaster and Stratocaster models (favored by Kurt Cobain and Jimi Hendrix), never learned how to play his own instrument. Fender began as an accountant with a knack for repairing radios, later turning that hobby into a full-time electronics operation. The highly versatile Telecaster, which he developed in 1950, became the first mass-produced solid-body electric guitar.
I suspect this has been done by someone but I can't find any such tests in my quick internet search. Seems to me this is the only way to really settle the debate; the differences may be too small to hear, but regardless if there is differences then the tone is being affected by the instrument. In that case the wood and body design is making the string vibrate differently, which is what the pickup...picks up.
The most famous Gibson guitar is the Les Paul, which has been a mainstay in the music world for decades. The Gibson Les Paul is a high-end, made-in-the USA instrument, and it comes in a few different variations. Like Fender, Gibson has remained fairly consistent with their styles and designs. In addition to the Les Paul, other famous Gibson electric guitars include the SG, Flying V, Explorer, ES-335, and Firebird. Their classic acoustics include the Hummingbird.
Among the favorite brands of Gretsch lie the signature variants Brian Setzer and Chet Atkins models. Whereas, its Jet and Duo Jet are equally worthy. All these models are aimed explicitly at Jazz. In fact, you can think of them for Jazz as what you call Jackson for metal. For intermediate and pro players looking for affordability, its Electromatic Series is the desired option.
This tuning may also be used with a capo at the third fret to match the common lute pitch: G-c-f-a-d'-g'. This tuning also matches standard vihuela tuning and is often employed in classical guitar transcriptions of music written for those instruments, such as, for instance, "La Canción Del Emperador" and "Diferencias Sobre Guardame Las Vacas" by Renaissance composer Luis de Narváez.
If you’re a very dynamic player who likes to play soft and loud, a compressor is a must have: by raising the soft parts and lowering / adjusting the loud parts, you will get an even sound that works for most applications and won’t make ears bleed: the simplest way to describe it is as an “automated” volume control. The EQ, on the other hand, is crucial if you have a problematic guitar, an amplifier with limited tone-shaping control or, simply, need a creative way to alter the way your guitar sounds. EQ can be placed in front of the amp for shaping the sound going inside the amp or in the send/return (after the amplifier section) as a volume boost/eq boost.
I have been a bass player and still am however I started on guitar at 12 and went back to it about 12 years ago. There really isn’t too much difference of perfecting your craft on either instrument. The most important thing to realize is when to play and when not to. I spent years learning how not to be a busy bass player and now that I have such a passion for playing guitar, I’m learning how to sound busy without really being busy.
For those players who prefer the good old valve sound and searching for one on a reasonable price, the VOX AC10 can be that great choice of an amplifier for the job. This 10 watts amp with 1×10” inch celestion speaker has a 2x12AX7 tube preamp section and 2xEL84 valve reactor power section housed in a closed back cabinet and its trademark grill cloth to deliver a genuine VOX brown sound. 
These Gibson Les Paul Reissue guitars simply perform better than those made the year after or the year before. Gibson is aware of this and has been for quite some time. That's why they've decided to push out a series of Les Pauls which aimed to match the ones from 1959. Are they equally as good? Probably not since the old ones are legendary, but they're as close as you'll get for a brand new guitar.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.

Another Japanese brand is Yamaha. They started making pianos and organs in 1887 and since then they have made all sorts of things. You know Yamaha motor cycles? Yep, same brand. But even though they seem to have a hard time deciding what kind of a brand they are they manage to make pretty decent musical instruments, often for affordable prices, so if you want to find a cheap but good guitar they probably have something that could work.
{ "thumbImageID": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "defaultDisplayName": "Fender American Professional Jazz Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030611", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black-1500000030611.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Black/J46145000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030610", "price": "1,599.99", "regularPrice": "1,599.99", "msrpPrice": "1,600.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray-1500000030610.gc", "skuImageId": "American-Professional-Jazz-Bass-V-Maple-Fingerboard-Sonic-Gray/J46145000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Looking at the front (or top rather) panel of the Boss ME-80 is where it gets interesting. Don’t let the sheer number of knobs intimidate you. Shaping your tone with the ME-80 is a very tactile experience, just like you would if you had a pedalboard full of pedals. The ME-80 is made for the guitarist that doesn’t necessarily want to lug around (or spend money on) a large pedal collection, but still loves the feeling of turning knobs and instantly hearing results. The interface is actually pretty easy to understand. Every major section is surrounded by a white border, and to design a sound (a.k.a. patch) you just move through the sections and set the effects to your heart’s content. We should mention that the Boss ME-80 has 59 different effects and nine guitar preamps which you can use. The first section labeled PREAMP is where you set your amplifier model, and should feel familiar if you’ve ever messed with a guitar amp. Next you have an EQ section, REVERB, COMP, OD/DS, MOD, and DELAY. You can look at the front panel for yourself in a closeup photo to see the various effects available within each of these groupings. The 8 black footswitches along the bottom are what you use to switch effects on and off, as well as move through banks and presets. They’re not your traditional stompbox footswitch, but they feel pretty nice. As is the norm with the larger multi-effects floor units, the ME-80 incorporates an expression pedal, which is assignable to different effects via the knob next to it. Very easy to use, very intuitive.
The device can be mounted on and removed quickly from almost any flat-backed acoustic guitar, using a system of magnetic rails. The ToneWood-Amp is designed for guitars with either a magnetic or piezo pickup (bridge or soundhole), but the team behind the device say they're also putting together a “Technician-Free” pickup bundle for those guitars without a pickup.

Once you have the essential elements in place-a great amp, guitar, and guitarist-you almost can't help but get a great guitar tone. Crank the amp up to the appropriate level and begin with some mic comparisons. It's especially telling to audition different types of mics: for example, dynamics, ribbons, and large-diaphragm condensers. (I rarely use small-diaphragm condensers for miking guitar amps; on the other hand, I've found that almost any microphone will strike gold once you find the right spot for it.)

One of the most useful features of guitar-amp simulation plug-ins is that they can help mask some quite serious problems with whatever you're putting through them, without necessarily changing it beyond all recognition. I've found that even relatively clean settings can disguise such horrors as clipping on transients to a surprising extent. If you're ever faced with a badly recorded guitar part (even one that's played on an acoustic guitar, or through an amp), try putting it through an amp modeller.
1. striking the string creates the vibration and once it disrupts the magnetic field on the pickup that's it - how about when you don't strike the string at all, like when you tap on the body of the guitar? The vibrating wood imparts vibration on the strings, which in turn do their thing on the pickup. The body of the guitar, the nut, the bridge, every part of the guitar is now directly influencing the sound you hear out of the pickup. Remember, only the magnetic field disturbance is being amplified, and tapping the guitar has started the strings vibrating. How can that happen without the wood's tonal qualities affecting the waveform?

I have one of these and what I like about this guitar are the little touches. The arch top and binding helps set it apart from other guitars around this pricepoint, as does the black chrome hardware. Schecters are enormously comfortable guitars to play and their finish work is excellent. This is a lot of guitar for the money, but you can upgrade twice within $500 with the Omen Extreme-6 and the Omen Extreme-6 FR, depending on your needs. After owning mine for a few years, I tossed a couple of Seymour Duncan Antiquity pickups in it to give it a serious upgrade and more longevity.
The original Les Paul featured a solid mahogany body capped with a maple top, which produced an instrument capable of many tonal variants with maximum sustain.  Although the first Les Pauls included two P-90 pickups, they are most well known for their two PAF humbucking pickups.  While many variants are produced, the double humbuckers put the Les Paul in a league of its own, separate from the offerings of Fender’s Telecaster and Stratocaster.
Beginners, take note! We’ve changed a few things in this article of beginner-friendly electric guitars, which included removing a few older models such as Squier’s Vintage Modified ’51 and the ESP LTD M100FM. We then added some new and popular models, such as the stripped-down Squier Affinity Jazzmaster HH, the super-cool Dean Vendetta XM, and the compact Jackson JS1X Dinky Minion. Also expanded the guide part of this article.
On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.

Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Goldburst, Redburst

Original Martin OMs from approximately 1929 to 1931 are extremely rare and sell for high prices. Many guitarists believe that the OM—a combination of Martin’s modified 14-fret 000 body shape, long scale (25.4″) neck, solid headstock, 1-3/4″ nut width, 4-1/8″ maximum depth at the endwedge, and 2-3/8″ string spread at the bridge—offers the most versatile combination of features available in a steel-string acoustic guitar. Today, many guitar makers (including many small shops and hand-builders) create instruments modeled on the OM pattern.[5]
Subsequent years brought new company ownership to the Gibson Guitar Company. During the “Norlin Era“, Gibson Les Paul body designs were greatly altered, most notably, the change to the neck volute. Because the Les Paul had the reputation of having an easily broken neck joint, the volute strengthened the neck where it joined the headstock to avert breakage. To further increase the strength, the neck woods were changed from mahogany to a three-piece maple design. The LP body was changed from a one-piece mahogany with a maple top into multiple slabs of mahogany with multiple pieced maple tops. This is referred to as “multipiece” construction, and sometimes incorrectly referred to as a “pancake” body. The expression “pancake body” actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The “pancake”-like layers are clearly visible when looking at the edge of the guitar. This process is also known as “crossbanding”, and was done for strength and resistance to cupping/warping. Crossbanding was phased out by 1977.
Using, or not using, some piece of gear doesn’t make a player more genuine, harder, tougher, more real, more natural, or better than players who do. What does make people those things is the honest pursuit of their art, the skills and experience earned from practice and performing, their genuine expression, feeling, and the ability to play something that has an effect on the listener. All of this is MUCH more difficult and real than simply choosing not to use a piece of gear.
The original  Owner purchased this guitar new at Ideal Music in Atlanta and loved her for the last 50 years. Vintage 1967 Gretsch 6120 Chet Atkins Nashville model,factory bigsby replaced "kill switch" tip (the white one) I have an original tip now, to lazy to take new pictures...and reproduction armature inside body for string mute / Muffler system...SEE MORE HERE...

I play a Tele, but I can’t say I’m in love with it. I have this feeling that a Gibson would sound and play differently – perhaps warmer and more mellow – but I have no factual basis for thinking that. It is based more on who I have seen playing different models, and what style of music they are playing. This is what I think most of the differences guitarists imagine come down to – a lot of preconceived notions, reinforced by vague generalizations (like the ones in this article) and marketing hype. But I readily admit I could be wrong about that.

Joe is a musician, engineer, and producer in NYC. Over the years, as a small studio operator and freelance engineer, he's made recordings of all types from music & album production to v/o & post. He's also taught all aspects of recording and music technology at several NY audio schools, and has been writing articles for Recording magaz... Read More

Optocoupling Compressor using a LED and a LDR. Similar to Colorsound Supa Sustain or DOD 280. As others have mentioned, instructions are a single photocopied sheet showing component layout. There's no mention that you'll need a piece of heat shrink to fab up your optocoupler. If you have some experience you can figure it out. Wire was not supplied.
The Effect: Expression pedals are nowhere near as popular as some other guitar effects. However, they have the power to make or break your guitar tone, depending on how far you are willing to go. At their very core, expression pedals are nothing more than a potentiometer in a pedal form. They can be as simple as that, which is represented beautifully by the Mission Engineering Inc EP­1, but there definitely are more advanced designs available. The purpose of an expression unit in your signal chain is to give you more control over equipment which supports this kind of accessory. We’re talking rack mounted effects, digital processors, guitar effects pedals and more. In some cases they are downright necessary, but in most they offer a whole new level of control over the effect in question. Despite their inherent simplicity, finding a good one still take some effort, lots of research and planning.

Wengrow said that Gibson got outmaneuvered by its competitors. “In the 1950s and 60s, it was really just Fender and Gibson as the two main guitar makers and they became the standard bearers. But other guitar makers such as Ibanez, Jackson, Yamaha and Paul Reed Smith, came to existence and copied their standards but continually updated many features and customizations that better reflected the idiosyncrasies of the times, often for cheaper prices.”

The characteristics of your Kingston are very similar to what other owners have reported: occasional scratchy and erratic performance of the electronics, intonation problems, and action that is hard to control (notably due to the lack of a truss rod). Although I can’t verify this, one estimate indicates that over 150,000 Kingston guitars were sold in the U.S. during the 1960s! It’s obvious that quantity trumped quality when it came to producing the guitars, and it isn’t surprising that the electronics have some issues after all these years.

Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 55mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 8 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Fixed - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: IBZ-8 - Pickup Configuration: H-H - String Instrument Finish: Black, White

There are two main types of amplifier: valve and solid state. Solid state guitar amplifiers tend to be cheaper and lighter, but they don't offer as good a sound as valve amplifiers. Valve ones, on the other hand, have working parts, so they're a little more maintenance heavy. Most serious musicians go for valve amplifiers due to the superior sound and lower wattage requirements.

{ "thumbImageID": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "defaultDisplayName": "Epiphone Les Paul SL Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage Sunburst", "sku": "sku:site51500000137033", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Vintage-Sunburst-1500000137033.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Vintage-Sunburst/K35586000005000", "brandName": "Epiphone", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Turquoise", "sku": "sku:site51500000137036", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Turquoise-1500000137036.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Turquoise/K35586000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000137035", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Ebony-1500000137035.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Ebony/K35586000006000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pacific Blue", "sku": "sku:site51500000137037", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Pacific-Blue-1500000137037.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Pacific-Blue/K35586000002000", "brandName": "Epiphone", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Heritage Cherry Sunburst", "sku": "sku:site51500000137034", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Heritage-Cherry-Sunburst-1500000137034.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Heritage-Cherry-Sunburst/K35586000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural Yellow Sun", "sku": "sku:site51500000137032", "price": "119.00", "regularPrice": "119.00", "msrpPrice": "199.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun-1500000137032.gc", "skuImageId": "Les-Paul-SL-Electric-Guitar-Natural-Yellow-Sun/K35586000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
First of all, the staff are incredibly amazing, lovely, hilarious and helpful.  My bandmates and I are not the most knowledgable in terms of gear, and the first time we came in wanting to get our first our ever guitar petals, Blake actually drew a graph of sound to explain how guitar pedals worked. They are the absolute best. Helping us out and going above and beyond what staff should be expected to do.  Hands down my favorite guitar store in Seattle, great selection, prices and above all the attention to detail and friendly attitude of the staff.  Can't rave enough!  Definitely found my guitar store for life!  Would recommend for all your guitar needs :)

There’s such a broad range of potential guitar and amp tones out there that it’s impossible to say “this works, but this doesn’t.” As a rule of thumb, though, go into the recording experience with the knowledge that the guitar parts that work live with a lashing of overdrive (natural cranked-amp gain or pedal generated) will often work better in the recorded mix with somewhat less gain and saturation. Heavily overdriven amps tend to swamp the mix, getting in the way of other crucial instruments, and sounding surprisingly muddy and washed-out as a result. Tightening one’s tone frequently brings back the punch and drive they seek from the part in the first place, and helps the guitars sit better with whatever else is going on in the arrangement. For instances of this, listen closely to a handful of guitar parts in classic-rock recordings that we tend to think of as examples of “heavy guitar tone” – Angus and Malcolm Young with AC/DC, Paul Kossoff with Free, Pete Townshend with The Who – and you’re likely to hear that they’re actually cleaner than you recalled. Then, when you get bogged down in an effort to record a satisfactory tone, consider cleaning it up at the amp or using a smaller amp.

I’ve written in previous issues of Premier Guitar about how the size and shape of a guitar’s headstock affect its sustain and tone. Clearly, the mass of the tuning machines is a factor in this, as well. Having overseen the building of tens of thousands of custom guitars over the course of my career has given me cause to consider machine-head weight as a fine-tuning tool in and of itself. This kind of mod is more complex than the others I’ve presented here because it is harder to predict, and obviously more costly to dabble in because it involves replacing the existing tuners. Nevertheless, I put it out there for those of you who are willing to go to the limit of sanity in the search for a responsive instrument.

Guitar Neck wood Fingerboard Blanks Electric guitar wood Burl Poplar 1pc Walnut Spalted Apple Burl poplar Spalted Maple Olive Spalted Walnut Burl Elm African Mahogany body wood Red Willow 1pc body blanks Plum Red Willow 2pc body blanks Spalted Birch Pear Mulberry Maple Acoustic / Classic guitar wood Flute and Oud blanks Pool Cue wood blanks & Wood Turning Gallery Sold examples Custom Wood Products Binding wood NEW! Gun Stock Blanks
In this example I used the "Sub Engineer Bass" patch included in the Kontakt 5 bass collection. But there are no rules in this regard: a simple sine oscillator can do the trick just fine. Back in the '60s and '70s it was not unusual to use a Rhodes to achieve the same effect, and Roland's famous JUNO-106 was also used on countless occasions with the same goal in the '80s. Just give it a go with whatever you have at hand!

If they're properly stretched it's usually not a big problem. Usually you can just push down on the new strings around the bridge and the nut and retune a few times to get the slack out, or do the push down/pull up technique to stretch them. I find that most players have more tuning issues from holding down the strings too hard or inadvertently slightly bending them with their fretting hand.
We make our Tone Bars / Ferrule Blocks (tone slugs) out of 360 brass and use them on most all of our string through custom guitars. You will notice an enhancement in sustain and beauty.  The ones sold here are not polished. Go to to purchase slugs that are polished. Please ask any questions you might have about the Slug. I offer quantity discounts.
When jazz guitarists play chords underneath a song's melody or another musician's solo improvisations, it is called "comping", short for "accompanying" and for "complementing".[citation needed] The accompanying style in most jazz styles differs from the way chordal instruments accompany in many popular styles of music. In many popular styles of music, such as rock and pop, the rhythm guitarist usually performs the chords in rhythmic fashion which sets out the beat or groove of a tune. In contrast, in many modern jazz styles within smaller, the guitarist plays much more sparsely, intermingling periodic chords and delicate voicings into pauses in the melody or solo, and using periods of silence. Jazz guitarists commonly use a wide variety of inversions when comping, rather than only using standard voicings.[3]
The effect of amplifier coloration can be emulated using a parametric EQ, where you'll probably find you need to add some upper mid-range boost to get the same brightness as from an amp. Note that, if you're using a software amp modelling plug-in, you'll still get the best results if you feed your guitar via a high-impedance DI box — plugging it straight into a soundcard's line input is likely to result in a drop in level and may even affect the sustain and high end of the guitar sound due to the pickups being loaded by the impedance of the input circuitry. This does not apply to active pickup systems which, in effect, function as a combination of pickup and DI box.
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
Pickup selectors can wear out over time. The lugs and the rotating switch can loose their tight connect with years of use. Also, many inexpensive guitars made today use cheap electronic parts. You may just want to upgrade your switch for more control and better selections. It is fairly easy to install a new pickup selector. Here are a few simple steps to replacing your pickup selector.
Lastly, but not leastly, Univox offered a super amp head, the C Group, or UX Series, available with either a guitar or bass cabinet. These were promoted with a flyer that sported a muscular black model with naked torso looking for all the world like Isaac Hayes, the man behind the popular movie Shaft. The UX actually consisted of a UX-1501 Amplifier head and either a UX-1516 speaker cabinet for guitar use or a UX-1512 cabinet for bass. The amp was a mean two-channel S.O.B. with blue vinyl and handles. It was set up for lead guitar, bass or PA use, with two guitar inputs, two bass inputs and two mixer inputs. Its 140 watts were obtained with eight tubes – four 6550s, two 12AU7s and two 12AX7s. It had two volume and a master gain controls plus bass, middle, treble and presence controls. Power on and separate standby switches. Four speaker output jacks. The coolest feature was a “tunneling circuit” that allowed, near as we can tell, blending of channels, which meant you could pump up the bass on one and hyper the treble on the other, and combine them. For a little extra punch, you could throw a hi-boost switch, too. The UX-1516 guitar cabinet was a 150-watter. For bass, the UX-1512 was a 200-watt Reflex Speaker Cabinet. Cost for the guitar outfit was $1,400, for the bass outfit $1,450.
Generally, guitarists with an array of pedals like to put their drive pedals first. This includes your overdrive, distortion, fuzz, or boost pedals. Some guitarists have more than one of these, and they usually go at the beginning of your chain. The reason for putting them first in your pedalboard order is because you will be distorting or boosting the purest version of your guitar tone. Putting a delay pedal before distortion means that the echoes from the delay pedal would themselves become distorted, resulting in an unnatural and messy sound. If you’re using an overdrive and a boost, it’s wise to put the boost first – that sends a stronger signal into the overdrive to get the most out of it.
{ "name": "Brown", "skuUrl":"/accessories/el-dorado-vintage-hand-tooled-leather-guitar-strap/361014000008000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 155.00, "formatedIntegerValue": "155", "decimalValue": "00", "isOnSale": false, "msrp": 155.00, "salePrice": 155.00, "listPrice": 155.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": false, "freeWarrantyAvail": false, "sku": "site1sku361014000008000", "displaySku": "361014 000008000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361014000008000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Vintage Hand-Tooled Leather Guitar Strap Brown", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,240", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"82996536150", "restrictionType":"", "restrictionError":"" }
Here we have something quite beautiful and very sweet sounding that I picked up directly from the very talented luthier himself while in Hawaii ...I liked this one because it has some very beautiful intricate inlay hand work see the gorgeous inlaied rosette and fingerboard not overstated just classicly tasteful WoW.. this is a Gorgeous all SOLID WOOD Hawaiian figured Koa Tenor Ukelele. I love the tone of this beauty and so will you its classic Uke tone is rich and full and plays like butta... Top wood : Solid Koa Back & Sides Material Solid Koa Neck Material : Solid AAA flamed grade Mahogany, Headplate wood: Solid Koa Strings : Italian Aquila Strings Fingerboard wood : Solid Rosewood Bridge wood : Solid Rosewood Nut Material : Real Buffalo Bone Finish : Polished Satin nitrocellulose instrument lacquer Scale Length : 17" Overall Length : 26 1/2 "( 673 mm ) Fingerboard Width At Nut : 35 mm Fingerboard Width At 12th Fret: 43.8 mm # Of Frets Total : 20 Hand picked for its great solid construction and impecable workmanship fit & finish are top notch, excellent volume & tone -playability and beauty. You will be hard pressed for find one this sweet for twice the price... Just $329. Direct comes with a top shelf hard shell case / included .
Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
The more pedals you collect, the more you should consider investing in a pedal board as well. Some pedal boards are simply that – boards – to which you can stick your stompboxes to keep them organized. But you can also get powered pedal boards, which have built-in DC power supplies. That means no need for batteries or individual adapters connected to each pedal: just tether them to the central source, and you can power them all up by plugging the pedal board into a single outlet.
In 1958, Gibson made a radical design change to their Junior and TV models: with the design change came cosmetic changes to these guitars that would later take on enormous importance. To accommodate player requests for more access to the top frets than the previous designs allowed, Gibson revamped both these electric guitar models with a new double-cutaway body shape. In addition, the Junior’s fresh look was enhanced with a new cherry red finish, while the re-shaped TV adopted a new, rather yellow-tinged finish for its new design.
In 1978 the Les Paul Pro Deluxe was introduced. This guitar featured P-90 pickups instead of the “mini-humbuckers” of the Deluxe model, an ebony fingerboard, maple neck, mahogany body and chrome hardware. It came in Ebony, Cherry Sunburst, Tobacco Sunburst or Gold finishes. Interestingly, it was first launched in Europe, rather than the US. It was discontinued in 1983.

Yet you’d never find a punk rocker who didn’t want to be just like him. Whereas most punk guitarists found inspiration from the same hard rock and proto-metal players that they pretended to despise, Strummer was influenced by reggae, rockabilly, soul, ska and even early New York rap music when most of the world still hadn’t heard of the Sugarhill Gang.
Some of the more distinctive specifications include, the headstock shape, tuners, neck and fretboard, bridge, and pickups and electronics. The headstock shape is based on PRS’s trademark design, but inverted to both accommodate Mayer’s playing style and also to keep a consistent length of string behind the nut, which makes staying in tune easier. The tuners are a traditional vintage-style, closed-back tuner, but with PRS’s locking design. The neck shape was modeled after 1963/1964 vintage instruments, and the fretboard has a 7.25” radius. The moment your hand grabs this neck, it just feels right. Like the tuners, the steel tremolo takes a classic design and incorporates PRS’s trem arm and Gen III knife-edge screws. The bridge on the Silver Sky is setup flush to the body in the neutral position so that the tremolo bridge only goes down in pitch. By keeping the bridge in contact with the body, the guitar itself is acoustically louder, which improves the signal to noise ratio of the single-coil pickups. The 635JM single-coil pickups are very round and full, with a musical high end that is never “ice-picky” or brash.
Gate – A dynamic effect that cuts off or lowers the volume of the output when the input is below a certain volume threshold. Once the input reaches the threshold the gate opens and allows the entire signal through. This is handy when placed in an amplifier’s effects loop for helping to eliminate hiss caused by high gain distortion when the guitarist is not playing.
You don’t have to go for the ones that cost thousands of dollars; there are some pretty decent ones that cost less than $300. What a multi-effects unit will allow you to do is to experiment with different effects and this will give you an idea of what kind of effects you will need to get a certain sound. Once you have a good idea of what kind of effects you’d like to use, then I certainly do recommend trying out individual pedals and building a pedal board. Either that, or you can definitely upgrade your multi-effects to one that has more authentic sounding effects and modelers.
Much of this is probably thanks to an outdated a pedal with a two-function switch that is labeled “Chorus” and “Vibrato.” These words will trigger a sigh of awe and wonder from many a guitarist because, of course, they are the labels on the mode switch of the famous Univox Uni-Vibe. This pedal is a good place to start because it was one of the first of the transistorized effects of this type to become widely available, and it occupies a patch of ground all its own in the world of things that go “swoosh”. That said, and despite the name and switch labeling, the Uni-Vibe is more akin to a four-stage phaser than what we today consider to be a chorus pedal, even if that’s the label on its most-loved setting. The deception is forgivable when you remember that the Uni-Vibe’s intention was to reproduce the chorus-type sound—or “chorale” sound, as it was often labeled—produced by a Leslie rotating speaker cabinet used with a Hammond organ. Also, the unit existed before there was much categorization of such things: it was a guitar effects footpedal, it had its own sound… and that was all anyone needed to know. The Uni-Vibe—and the better clones that have followed it down the years—is based around a discrete transistorized circuit with four sets of light bulbs and light cells and a low frequency oscillator (LFO) which does the shifting work to move the peaks and notches. Unlike the drawing-board phaser discussed above, however, the frequencies of each stage of the Uni-Vibe are set differently, so it could be argued that there is indeed more of a chorusing of the sound.

"I have purchased 15 personalized guitars from the top guitar custom shop. All the guitars have met or exceeded my expectations. Great workmanship and quality work. An exceptional group of people to work with. They are ready to answer your questions or concerns. The one time i had a concern about a guitar they responded immediately and handled the situation more than i expected. I highly recommend this company!" Dr E C Fulcher Jr - Abingdon, Maryland USA.

Dobro – we’re still in Dobro territory here, not National – quickly followed suit in 1934 with the Dobro Electric Resophonic guitar. This was basically a wood-bodied Dobro resonator guitar with a Stimson pickup just in front of the handrest. Unlike the All-Electric, this had the poles perpendicular to the strings. This also did not especially go over, and dropped from sight before the year was up.
You would probably be better served to specify a budget, then mention the kind of music you want to learn to play and whether you want an electric or an acoustic. As general advice, within any price range probably a general-purpose guitar would be better for you than something meant for a specific purpose - e.g., no pointy lime green electrics. By general purpose I mean guitars like Strats, Les Pauls, and concert-sized acoustics. Nothing particularly fancy.
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
In a nutshell: Lowell Kiesel is the name of the guy who founded Carvin. He originally sold guitars under his own name, but later changed the company name to Carvin, a melding of the first names of his two sons. So, when Carvin changed the name on their guitars to Kiesel, they were actually reverting back to their roots. Kiesel is Carvin, and Carvin has always been Kiesel.
OCTAVACIÓN (FAT20) Cada una de las silletas está provista de un tornillo de bloqueo para impedir todo movimiento. Para ajustar la octavación, afloje el tornillo de bloqueo de la silleta con una llave Allen de 2 mm. (D) Para ajustar la octavación, introduzca una llave Allen de 2,5 mm en el tornillo de la silleta situado en la parte posterior del trémolo.
Not the first commercially available flanger pedal, but probably the first that really worked properly with the full sonic depth of the effect, the A/DA Flanger was made possible by the advent of the SAD1024 chip (others were used through its lifetime, depending upon availability). It hit the shelves in 1977, and was shortly followed by Electro-Harmonix’s equally beloved Electric Mistress, and MXR’s big, gray Flanger. Nearly every big maker slapped its own flanger on the butt and sent it toddling down the pike within the next few years. These were serious pedals in their day, the big boys requiring their own regulated onboard AC power stage to run all that thirsty silicon. Most required a serious investment on behalf of the impoverished guitarist, too. A/DA’s unit retailed at $199.95 when introduced, and others went for even more. Not a steal, when you consider that minimum wage was $2.30 an hour in 1977.
Although it’s a minor issue when choosing your first guitar, the tone and sustain that the guitar can produce relies on the quality of the material it’s made from. The most used tonewoods in the budget range are basswood, poplar, alder, and paulownia, while more expensive guitars can be made from pine, mahogany, and swamp ash. This is just a rough rule though – these days you will find mahogany in budget guitars and basswood in premium models. They all have different tonal qualities – for example, mahogany typically offers a warmer sound, swamp ash is brighter, while basswood and alder are well-balanced.
Most seven-string guitars add a low B string below the low E. Both electric and classical guitars exist designed for this tuning. A high A string above the high E instead of the low B string is sometimes used. Another less common seven-string arrangement is a second G string situated beside the standard G string and tuned an octave higher, in the same manner as a twelve-stringed guitar (see below). Jazz guitarists using a seven-string include George Van Eps, Lenny Breau, Bucky Pizzarelli and his son John Pizzarelli.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"headphone guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category3"}
Now think about all the advances in guitar technology that we’ve witnessed over the decades—how much smarter we are now when it comes to acoustics, electronics and precision manufacturing? Sticking with this metaphor, isn’t it a bit crazy that we place such high value on the early designs that represent the Model T-era of the electric guitar’s evolution? We’re not just talking nostalgia and historic significance here—ask most guitarists to name the most amazing, best-sounding electric guitars ever made, and they’ll go all the way back to early-fifties Broadcasters, late-fifties Les Pauls, and early-sixties Stratocasters. Guitarists cling to the tones produced by what is, essentially, first generation technology.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.
The original switch configuration used from 1950 to 1952 allowed selection of neck pickup with treble tone cut in the first position (for a bassier sound), the neck pickup with its natural tone in the second position with no tone, and in the third switch position both pickups together with the neck pickup blended into the bridge, depending on the position of the second “tone” knob. The first knob functioned normally as a master volume control. This configuration did not have a true tone control knob.[2]

I believe its an 80's model it has some wear n tear but makes it look good and ventig. But there is nothing on it but the bently sign on the headstock.its jet black has a bridge not string through. Two hummbuckers I guess. A treble and rhythm switch up by the neck on the top. It is a 22 fret with pearl inlays. Someone shoot me an email n ill send picks of it. Just want to know what I got my hands on.
Hartley Peavey built his first amp in 1957 and decided to establish his own company in 1965. Ever since, he has been the head of one of the biggest audio gear companies in the world. Eddie Van Halen collaborated in the design of the famous 5150 amp, a legendary amp that is still heralded by today's enthusiasts. However, the collaboration stopped in 2004 and the brand had to rename its amp to 6505. Born in the 1970's under the name Vintage, and with a completely different style, the Classic series is still very popular among blues, jazz and rock guitar players. The brand has also developed solid-state amps (the Bandit series) and, more recently, some modeling amps (the Vypyr series).
Very large cabinets, such as 8x10" cabinets, may have both wheels and a long "towel bar"-style handle to facilitate moving the equipment. Some 8x10" cabinets have handles on the top and bottom to facilitate two-person carrying of the cab. Some combo amplifiers have wheels and a retractable carry handle, to enable bassists to walk while pulling their bass amp; this can enable bassists to walk onstage with their bass and amp or walk to a venue with their gear.
INTONATIONSEINSTELLUNG (FAT20) Um sicherzustellen, dass keine Bewegung auftreten kann, hat jeder Sattel eine Stellschraube, die den Sattel verriegelt. Beim Einstellen der Intonation lösen Sie die Sattelverriegelungsschraube mit einem 2 mm großen Inbusschlüssel. (D) Zum Einstellen der Intonation setzen Sie einen 2,5 mm großen Inbusschlüssel in die Sattelschraube an der Rückseite des Tremolo ein.
To repair your guitar’s body, glue in any broken wings. Also, repair strap buttons that have come out and bridge holes that have been stripped by putting glue on a toothpick and applying it to the holes. When the glue is dry, you can re-insert the strap buttons or re-thread the bridge holes. You can use the same technique to repair bolt-on holes if the screw holes are stripped or are larger than the threads. If the holes are too large, just leave enough toothpicks glued into the hole to take up the extra space before you re-thread the screw.
One reviewer mentioned that anyone wanting to purchase the C40 will need to change the strings to get the best sound out of this model. Another reviewer uses the C40 as their main guitar for composing, and it works quite well for the job. So, overall, if you feel the need to be cost-conscious at this point in time, but want a quality instrument, the C40 should be on your list of models for proper comparison shopping.
Remember, when you choose to buy an electric guitar by itself (not as part of a ‘starter pack’), you’ll also need to buy an amp, guitar cable, and a tuner. These are extra costs that you should budget for on top of the cost of your new guitar. I recommend that beginners keep their first amp purchase conservative–both in price and size. Here’s what I’d recommend:
Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.
Note: The concept is buried in first understanding the other meanings of the word custom. Although “made-to-order” is a correct characterization where you can personalized the headtsock with your first or last name or initials and you can CUSTOMIZE YOUR GUITAR: Mahogany, Alder, Maple, Bass Wood, Right/Left handed guitar, Body colour, Neck profile, No dots on fretboard and Fret size. Our Custom Shop Guitars referred to in this site as drawing "inspiration" from the major guitar brands and any reference to custom shop brand names or "Inspired by" are made strictly for comparison purposes only.
This is a Japanese Fender Jaguar recorded on the both pickups setting direct in and also through a valve driven Fender reverb unit. This can be used with software amplifiers such as the free fender and marshall vst plugins on this forum (there are lots of software guitar amplifier and pedal related things worth downloading on the Guitar Amp Modelling forum) or amplifier impulse response files with your convolution reverbs like Jconv on Linux or Freeverb on Windows. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them.
The Seagull Maritime Solid Wood Series of acoustic guitars are designed to offer the features and benefits of the brand’s higher-end Artist Series of guitars but at a more affordable price point. The Maritime SWS guitars are offered in a variety of shapes such as mini jumbo, folk and dreadnought, and come in two custom-polish finishes: high-gloss and semi-gloss.
We specialize in the repair and restoration of stringed instruments and Guitar repair in Nashville, and the surrounding area. Our services provide for stringed instrument repair and maintenance  of all makes and models.  We also sell stringed instrument related accessories. Contact us for all of your repair and restoration needs. We love rescuing injured instruments, and helping them make music again.
Versatile- many of the practice amps today have “AUX” (Auxiliary) inputs for your electronic music devices like your iPod, phone, or tablet computer. This is essential for learning songs because you can pipe your song from your device into your practice amp and play along either out loud or with your headphones in private. With so many music apps out today for iPhones and Android devices, you can also connect the headphone jack of your practice amp to your personal device to learn new songs and/or record your performance! Check out Ultimate Guitar Web on Google Chrome
This JEM is an entry level version of the 7V we mentioned earlier. While it doesn’t have the same range as the guitar it was inspired by, Ibanez JEMJRWH still brings you a good portion of Steve Vai’s core tone. In a lot of ways, it’s a great substitute for those who are on a tight budget. I compared the two and the playability was almost on the same level.
Re-amping a DI'd keyboard or bass can really liven up a sound, but if you don't have access to a nice amp or amp modeller, you can simulate the effect by sending the audio to a bus with a delay plug-in set to a short delay time and with the wet signal set to 100 percent and dry to 0 percent. Then send the bus's output to another bus with a distortion (or better still, a guitar amplifier emulator) plug-in inserted. This simulates the delay you get from miking up a speaker, and if you blend this in with the DI'd sound, it can give the recording a live feel — especially if you use a convolution reverb to add some 'room' ambience. You may also want to roll off the very low and high frequencies to help get rid of that DI'd vibe. Nicholas Rowland
Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.
Simple answer is, if you have money for the higher end of Taylor, buy a Collings. I've been working as a repair tech in a store that stocks Taylor for around 5 years. Went to lutherie school under one of the best guitar builders in the country. I've played dozens of examples from nearly every model range Taylor has to offer, as well as a few of the more limited edition high $$$$ range. I will give credit where it is due, on the USA made models fit and finish is above many other brands.
Based on the popular Les Paul Jr, the Saga LJ-10 DIY electric guitar kit follows after its streamlined aesthetics and electronics. It comes with the popular LP style body, crafted from basswood and pre-drilled for complete assembly. It has a bolt-on neck that you have to screw into the body, and a headstock that you can carve into your preferred shape.
the top five in no certain order are…….. JIMI HENDRIX .NIO EXPLANATION NEEDED……..RICHIE BLACKMORE he broght the strat into metal and he led his leads perfectly back into the song ……… .EDWARD VAN HALEN he was the next innovater after hendrix…………DIME BAG DARRELL….he was just plain the baddast ass of them all…………..AND ENGWIE MALMSTIEN he did everything else……..there are lots of great guitar players . but .these five guys set the bar for everyone else
Why We Liked It - The Martin DRS2 will take some beating as one of the all-round best electric acoustics you can buy, simply because you’re getting the finish and tonal quality of a much more expensive guitar for a solid price. Whether you’re mainly looking for a traditional acoustic you can occasionally amplify, or you need something professional grade for gigs, this could be it. In terms of recording your guitar, you can mics for guitars or a microphone for the guitar amp. If you're looking for an alternative, check out the Martin Road Series DRS1 Dreadnought.

Now, instead of just containing part of the sound completely, the tone knob is hooked up to a capacitor. The capacitor doesn't let everything through. Basically, it starts with the highest frequencies, letting them through to be contained rather than go to the amplifier. The more of the signal you send to the capacitor, though, the more of the spectrum it is forced to let through, meaning that more and more of the high end of the continuum is let through - the rest of the current is sent back and is let out through the line to the amp.

Dirk Wacker lives in Germany and is fascinated by anything related to old Fender guitars and amps. He plays country, rockabilly, and surf music in two bands, works regularly as a session musician for a local studio, and writes for several guitar mags. He’s also a hardcore guitar and amp DIY-er who runs an extensive website——on the subject.
Most Humbuckers are wired in anti-phase, where the opposing polarity of the localised magnetic fields cancel each others out at selective points, creating a lower bandwidth region in the high frequency domain. Less bandwidth = lower noise. If done correctly, with carefully designed pickups, it will not affect the tone, but traditionally it did, because Hillbilly wannabe technicians made the things on their knees.

(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1430.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodL21430, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=999.99, salePrice=999.99, isOnSale=false, showMSRP=true, restockCount=0}
Mostly everything about a guitar in this price range feels premium, and the sound quality and playability is enough to put a smile on any guitarist’s face. You also start to find advanced features such as brand-name pickups, active pickups, and EverTune bridges, as well as unique signature models that are too expensive for manufacturers to produce as a budget line.

The Boss Katana KTN-HEAD Amp Head has become one of the most talked about amplifiers as it features the coveted Waza technology found in the beautiful BOSS Waza Craft Pedals. The same care and attention that goes into these pedals has gone into the BOSS Katana head to produce a versatile and highly  aerticulate amplifier. Packed with Five unique amp characters: Clean, Crunch, Lead, Brown (derived from the Waza amp), and Acoustic (for acoustic-electric guitars), the Katana head ensures you have enough sonic diversity for all genres. You can choose from 55 BOSS effects and load 15 on to the amp via BOSS Tone Studio editor software and you can actually use it without a cab thanks to the monitor speaker - making it a great practice amp that you can use to get your sound and hook up to a cab later on at your gigs.
Bending: Bending is a pretty common element of Tab. You can tell that you are supposed to bend a note by an upward pointing arrow next to one or more numbers. The distance you are to bend the note will be defined by an indicator next to the arrow. It might be a “full” bend or a “1/2” bend. Once you are exposed to a couple of bends you will quickly catch on to the basic idea.
The first Merson guitar advertised in The Music Trades appeared in the December, 1948, issue. This was the Tempo Electric Spanish Guitar which listed at $59.50 plus $11.50 for a Dura-bilt case. The Merson Tempo was an auditorium-sized archtop with a glued-in neck, a harrow center-peaked head which looks almost Kay. The guitar was finished in a shaded mahogany with a pair of widely separated white lines around the edges. Available source material is hard to see, but these appear not to have any soundholes. The fingerboard was probably rosewood with four dots (beginning at the fifth fret). This had a typical moveable/adjustable compensated bridge, elevated pickguard and cheap trapeze tailpiece. One Super-Sensitive pickup sat nestled under the fingerboard, and volume and tone controls were “built-in.”
In 1947, Jerry Wexler, a writer for Billboard Magazine described African American music as ‘Rhythm and Blues’ and its appeal was spreading fast and wide helped by the popularity of the radio DJ. People across the states would tune in to their favourite stations to hear the music they loved. Whether or not the song was performed by black or white musicians became irrelevant.

New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
I have 12 years whit my SL3 Jackson and 12 years whit my RG7420, so far I have replaced both POTs on the jackson, the frets are really worn out and FR chrome is peeling.. great guitar crappy components. oh, I havent had to replace anything on the Ibanez yet other than the stock pickups for something better. both are made in Japan =). So dont tell people that Ibanez sucks before actually owning one...
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!!
I purchased this about 8 months ago (it is my first acoustic guitar) so I could learn to play again, I'm a singer by trait, but wanted to pick up a guitar again after a very long break. I did not want to spend a lot of money, but I didn't want junk either, while at the same time I wanted something that would translate well into performing live too. I did my research, and personally, it came down to this or the Yamaha APX-500 (But I really want the Mrk 1 not 2), so I settled for this.
{"pageName":"[gc] pdp: gandl legacy solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";114488369;;;;evar65=Used-Guitars-G&L","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
This full-size electric guitar from Davidson is all that you need to start playing master the very art of strumming. The quality, durability, comfort, and accessories that are required to get you started is included in this solid guitar package from Davidson. This is a full size (39 inches) and complete scale solid electric guitar made of maple wood. It is an electric guitar featuring a maple neck and gloss finish.

The modern classical guitar is usually played in a seated position, with the instrument resting on the left lap - and the left foot placed on a footstool. Alternatively - if a footstool is not used - a guitar support can be placed between the guitar and the left lap (the support usually attaches to the instrument's side with suction cups). (There are of course exceptions, with some performers choosing to hold the instrument another way.)

An overdrive is almost always at its best played through a tube amp set at medium to upper-medium volume, since the amp itself is doing a major part of the job, the pedal just being the boot that kicks its butt into juicy break-up a little quicker. Conversely, demo one DI’d into a mixing desk or portastudio as described earlier, and in most cases the breed sounds absolutely awful: harsh, raspy, cold, and artificial. It can be a shocking look at the evil side of that $350 vintage Tube Screamer you just bagged from eBay. Now stop crying, and plug it back into your AC30.

Since they're usually not sure if they'll stick to it I wouldn't spend a ton on it. Make sure it at least plays well. Learning on a poorly constructed guitar can really take the fun out of the whole process and may even convince you that guitar is harder than it really has to be. You can also fix many issues with less-expensive guitars by bringing it to a luthier.
An electric guitar works on the principle of electromagnetic induction. This means that an electric guitar has electromagnets in its system which generate magnetic fields. Apart from this, an electric guitar has an amplification system which amplifies the sound waves generated by the guitar’s string. It is this combination of electromagnetic induction and amplification system that makes an electric guitar run.

The next most important review criteria for any electric guitar, is its sound. Please allow me to be very clear here that this guitar is mostly suited for heavy rock tones, aggressive higher leads and chugging, crazy distortions. If you are more interested in a crisp, jazzy tone, maybe you should opt for a beginner’s Stratocaster electric guitar like Squier by Fender, instead. Having said that, this instrument sounds great in its genre, and also remains in tune for long periods, so you don’t have to worry about manually tuning it. Yes, the string tension is higher as compared to a 24.75” Stratocaster or XX Les Paul, but in a way this challenges electric guitar novices to acquire greater mastery over their notes!
Lou Reed has been blowing traditional guitar styles to bits since his Velvet Underground days. A fan of Ike Turner's R&B and Ornette Coleman's free jazz, he created epic bad-trip psychedelia on songs like "Sister Ray." "He was rightfully quite proud of his own soloing," wrote fellow New York guitar luminary Robert Quine, "but resigned to the fact that most people weren't ready for it." As a solo artist, Reed kept on ripping up the rulebook: See 1975's Metal Machine Music, a noise opus that took feedback further than Hendrix could have imagined.
I kind of think what I do is like producing with my feet because I do a lot of that in my own shows. Particularly when I'm playing guitar with other bands, I'm always changing reverb [settings] and modulation types and the very sorts of things that [maybe no one else realizes what's going on], but it keeps me interested. I think because I come from a time before that was possible, it's a magical thing for me.
Whether you are an acoustic or electric guitar player one of the simplest ways you can add some dynamic or sonic change to your worship set is by stepping on an effects pedal at appropriate moments. However, if you are new to the world of pedals there seems to be endless choice of single or multiple effects units (and no, you don’t need as many as are in the photo!). Whilst multi-effects offer loads of sounds in one box, they can be hard to programme and difficult to adjust quickly on stage. There’s a million things written about effects pedals out there in Googleland but if you’re brand new to this here’s a potted overview of some of the most popular types.
His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.

Here we have a wonderful vintage 1971 Yamaha FG75 Nippon Gakki this one is from the famous Red Label series by Yamaha well know for Quality Marty like sound made affordable by Yamaha Japan over 45 years ago this guitar has well aged woods not the Faux aged “gassed pressed” high Tech way they are trying to re-create the naturally sweet aged tone that “Old aged instruments can provide “ This one was aged the old fashioned way over decades of time and as a result a surprisingly big sound is produced by this smaller bodied Grand concert like size of the Gibby LGO- but sounds even better for less dough …..Just in Excellent vintage 45+ year old Vintage Red Label Nippon Gakki FG75 .. this baby makes an excellent Parlor style guitar thats fun to play because of its real good play action, and it sounds great... JVGuitars upgraded to Martin bone Nut and compensated saddle and upgraded fancy bridge pins that improved its resonance too .... not a crack, plenty of patina with minor superficial nicks or scratches and such as seen absolutely but no structural damages ... this one plays very nicely and is ready to enjoy .... for a song contact Joe to buy at Joe's Vintage Guitars at: .
{ "thumbImageID": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Classic-Natural/L26755000004000", "defaultDisplayName": "Ernie Ball Music Man StingRay Special H Maple Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage Tobacco", "sku": "sku:site51500000221635", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Vintage-Tobacco-1500000221635.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Vintage-Tobacco/L26755000006000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Burnt Apple", "sku": "sku:site51500000221637", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Burnt-Apple-1500000221637.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Burnt-Apple/L26755000007000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ivory White", "sku": "sku:site51500000221279", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Ivory-White-1500000221279.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Ivory-White/L26755000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Dropped Copper", "sku": "sku:site51500000221276", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Dropped-Copper-1500000221276.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Dropped-Copper/L26755000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Charging Green", "sku": "sku:site51500000221636", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Charging-Green-1500000221636.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Charging-Green/L26755000005000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Classic Natural", "sku": "sku:site51500000221277", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Classic-Natural-1500000221277.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Classic-Natural/L26755000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jet Black", "sku": "sku:site51500000221278", "price": "1,999.00", "regularPrice": "1,999.00", "msrpPrice": "2,000.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Jet-Black-1500000221278.gc", "skuImageId": "StingRay-Special-H-Maple-Fingerboard-Electric-Bass-Jet-Black/L26755000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
More expensive amplifiers may have a patch bay for multiple inputs and outputs, such as a pre-amp out (for sending to another guitar amplifier), a second low gain input, to use with active basses, an in jack to create an effects loop (when used with the pre-amp out jack), an external speaker output (for powering an additional speaker cabinet), and stereo RCA jacks or an 1/8" jack, for connecting a CD player or MP3 player so that a player can practice along with recorded music. Some amps have a 1/4" jack for connecting a pedal to turn the amp's onboard overdrive and reverb on and off or to switch between channels. Some amps have an XLR jack for a microphone, either for the guitar amp to be used for singing (in effect as a mini-PA system), or, for acoustic guitar, to mix a mic signal with a pickup signal.
Tribute Legacy Electric Guitar Candy Apple Red Rosewood Fretboard. The G&L Legacy blends contemporary refinements from the Leo Fender-designed S-500 and Comanche models with classic Alnico V pickups. If your holy grail is faithful Alnico single-coil tone with modern refinements and superb craftsmanship, the Legacy makes for an excellent choice. The Legacy's vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ˜50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo's private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ˜50s, all on a quest to discover where the real mojo was - and wasn't. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon's persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World. This axe is no slave to the past, however, starting with Leo's PTB (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What's more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy is...
Some of the smaller amplifiers that I like to talk so much about are not really that small. I mean, the Marshall MS4 Mini Micro Full Stack Battery Amplifier is anything but small, in terms of sound at least. It has a powerful volume output that is hard to ignore for anyone, be it in some bar or in the street or at some gig. The tall tower like shape of the guitar is exceptional in design and yes, while the stack is a little on the big side, the affordable price of it and the quality of tone and volume is definitely worth the little bit of a size problem. Definitely worth your consideration!
 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.

Central to Fender success aside from the guitars that carried the brand all this years are the amps they make which are pioneering themselves in giving guitar players unique set of tones and unmatched overall sound quality. This is what we can say are the indicative sign and facts on why players should get their hands on a Fender Super Champ X2 for a beginner amp.
Think of some of your favorite songs. Maybe they get your toes tapping, or get you pumped up and ready to take on the world. Regardless of your musical preferences, the odds are that one thing all of our favorite songs have in common is an absolutely killer bass line. The bass has played a key role in holding down the rhythm throughout the history of popular music, and continues to make an impact to this day. Another One Bites the Dust by Queen, Been Caught Stealing by Jane's Addiction, Money by Pink Floyd, Sweet Emotion by Aerosmith, and Longview by Green Day are just a few examples of songs that are taken to the next level thanks to their incredible bass lines. Now it's your time to make your mark on this instrument with some serious grooves of your own. You'll find bass guitars for every skill level and playing style in this section.

No way can this list be accurate simply for the fact that there are so many styles out there with such important players, having a list of greatest guitar players with BB King and Tom Morello on it is ridiculous. Both are great in their own right but it’s like comparing apples and oranges. There should probably be separate lists for separate genres. Having said that, I think a good start for a top 10 ROCK list, in no particular order, would be: Joe Satriani, Yngwie Malmsteen, Kirk Hammett, Dimebag Darrell, Steve Vai, Eric Johnson, Slash, Jerry Cantrell, Joe Perry, and Angus Young.
There is something special about musical instruments of a certain age. Guitars built from the mid 1950s until the late 1970s are generally held in high esteem; techniques and materials, particularly pre-1970 were vastly superior to today's 'mass-produced' standards. But is a vintage guitar really much different to a modern day equivalent? People often say wood is wood, but this is simply not the case. Centuries old trees that were regularly harvested for guitar manufacture in the 1950s are now protected, and it is these old trees with close grains and unbeatable tonal qualities that make the very best guitars. With rainforests rapidly diminishing their protection can only be a good thing. But it does mean that good quality older guitars, perhaps with a few modern upgrades can make some of the very best instruments available. What's more, much of the painstaking attention to detail lavished upon fine old jazz guitars by special order/custom departments and aimed at serious guitarists has been replaced by the continual churning out of 'limited editions', aimed at serious collectors. Whether these rare, but ultimately not-so-special guitars will be quite so desirable in 30 years time remains to be seen.
Practical - These sessions will involve exercising your fingers. For example, fingering chords would fall under this category, as the focus will be on getting physically comfortable with positioning and changing between chords, or experimenting with new strumming patterns. With lead guitar, the physical side covers techniques such as legato (you'll learn what that means soon enough!), string bends, speed drills and anything that involves the physical side of playing guitar.

I have played a ASAT Telecastor Bass for about thirteen years. I keep purchasing other bass guitars for many other reasons. But I have sold them all. I am down to just one bass that's all I need with my G&L, it very responsive, it has many opitions with pick ups and the action is good. It took along time for me to figure out how to use the pick ups because there is so many different ways you adjust it. They are built with better quality parts than a fender. They are numbered from the factory in america. But watch out for the Tribute series that is fake or cheap want to be G&L. A real G&L will be a little more expensive but the quality is excellent
In the ’66 American Teisco Del Rey Catalog, the small, humble EP-9T was left over from before (formerly EP-9), with the quasi-Gibson style head and triangular control plate. The only thing new was the Bigsby (thus the T). In the ’66 Japanese catalog, the small thinlines were represented by the EP-2L and EP-1L. The EP-2L looks for all the world like the EP-9T, with the large rectangular pickups with black inserts, controls on the triangular lower bout plate, and a long-armed trapeze vibrato with a curved handle. The EP-1L was the same except for having a single metal-covered pickup at the neck.
Additional mics can be used to capture different tones from the amp and/or some ambient room sound. When recording open-backed cabinets, great results can be obtained by using a second mic at the rear of the cab. When this technique is employed, it’s wise to invert the phase on one of the channels. To create a sound that’s larger than life, try recording a part with close and distant mics and pan the two channels, then repeat the process, panning the channels in the opposite direction. Two close mics pointing at different parts of the speaker – one dead-centre and the other towards the far edge – will pick up the full range of the speaker’s tone.
If you’re interested in learning how to play electric (or even acoustic) guitar, you obviously need to pick up an instrument. But that’s only the beginning of the gear you need to get to shredding. Second only to a guitar itself, you’re also going to need an amplifier – the device responsible for projecting the sounds of your chosen guitar. The problem is: for a beginner, this task is as daunting as it is expansive.
Plays like a Fender, sounds like a Gibson! Absolutely amazing and incredibly versatile guitar. The pickups are really impressive, the playability is second to none. I sold my first G&L, I'll never live down the regret, so I bought another one. I haven't played a PRS yet, but I own a Fender Strat and a Gibson Les Paul, Schecter and an ESP Eclipse, but it's my that G&L gets the most play time!

With the neck profile and nut slots correct, approximate the positions of the string saddles for correct intonation. Low E and G string will set back about 3-4/32nds of an inch longer than the exact scale length. The A and B strings will set back 2-3/32nds , The D and high E about 1 32nd. Scale length equals the distance from the fretboard edge of the nut (where the strings bear off) to the middle of the twelfth fret, times 2. If the measurement from the front of the nut to the middle of the 12th fret is 12.75", then you have a 25.5 inch scale length (12.75 x 2= 25.5) Final positioning is done once saddle height is determined, but you need to be close to this final location when determining the saddle height.

I don't understand why everyone is so "Gibson is the best". They have been going downhill for years. Unless it's a custom shop job, it is hit or miss. the same with Fender. Everyone likes them because of the mystique of the players that played them over the last decades. It's a "lifestyle cult" with name recognition. If you want a guitar that plays and sounds like a Gibson of Fender is supposed to but want to be guaranteed of the quality you are receiving and spend for a fraction of the money, then get a used USA Custom Shop made Washburn. You will never look back. I say used because the Chicago custom shop has apparently closed. Anything made there from about 1993 - 2008 that looks like a competitors guitar will outmatch the competitors version every time. You will notice that it is hard to find a used custom shop Washburn around. That's because they are the guitar worlds best kept secret. The people in the know get them - at a massively reduced price - and keep them. People hang onto their USA Washurns for the most part and there i a reason for that. They are that good.
Though, it is important to know that diving into the world of building your own guitar pedals requires a vast amount of knowledge. A person who builds DIY guitar pedals should have a rather keen understanding to circuit board electronics, because this will allow them to understand how exactly to put a guitar pedal together, as well as troubleshooting.
So you want to shred without all the lettuce. You want to strum without losing all your Benjamins. You want an electric guitar without spending loads of money…is what these metaphors mean. Probably over-explaining it now. If you’re looking for an affordable electric guitar that doesn’t sacrifice quality, you’ve come to the right place. Let’s take a look at ten notable electric guitars for under $500.
Midlands trio The Bad Flowers make a concise, bruising power-blues that will appeal to fans of the likes of Jared James Nichols and Blues Pills, both of whom have offered TBF support slots. September single Thunder Child is the first shot fired from their forthcoming debut Starting Gun and packs an uproarious solo that leaves TG reaching for our wah pedal. Think Rory Gallagher through AC/DC’s amp stack and you’re near Tom’s bar-fight-scrapping lead sound.
{"product":{"id":"113206695","stock":"instock","price":"299.99","name":"Vintage 1960s Maxitone Bruno Sunburst Hollow Body Electric Guitar","download":false,"sku_id":"113206695","checksum":"83818118023","rep_id":"site5113206695","displayId":"113206695","sku_display_id":"113206695","sku_rep_id":"site5113206695","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Semi-Hollow and Hollow Body Electric Guitars","dept":"Guitars"}
Due to the ever rising popularity of reverb, it didn’t take long for companies to figure out how to recreate the effect in early guitar amps. Have you ever heard of Spring Reverb or Plate Reverb? While to you these are just labels on a knob, back then these were real analog devices built into amplifiers. Needless to say, we have come a long way from using complex mechanical contraptions to create decent reverb.
Proceed to the next two chords. The next chord you would play would be a power chord on the fifth fret of A three times. So you would play with your index finger on the fifth fret of A, your middle finger on the seventh fret of D, and your ring finger on the seventh fret of G. Then, simply shift this finger shape down one string so that your index finger is on the fifth fret of the E string with your other fingers on the seventh frets of the A and D strings. Play the chords in the sequence that they're highlighted with parentheses below:
A bass stack may use a single speaker cabinet (e.g., the huge 8x10" cabinets widely used by hard rock and metal bassists). The 8x10" cabinet is often provided as "backline" equipment at music festivals; this way, all the bassists from the different bands can use the same amplifier and speaker cabinet. This reduces the transition time between bands, because the roadies do not have to remove the previous band's bass stack and bring in the subsequent band's stack. Using one 8x10" as backline gear for an entire music festival also makes the transition easier for the audio engineer, because she can have an XLR cable plugged into the amp head's DI unit output (to get the bass amp's signal so that it can be mixed into the sound reinforcement system mix) and have a mic set up in front of the cabinet, to capture the amp and speaker cabinet's distinctive tone. The 8x10" cabinet is widely used by heavy metal music, hardcore punk and psychobilly bassists, as these genres use a loud onstage volume. Some metal bassists, such the bass player for death metal band Cannibal Corpse, use two 8x10" cabinets for large concerts in stadiums or outdoor festivals.
This list would have been incomplete without us mentioning the Shure SM57-X2U. Because it is a plug and play device, as it uses USB connectivity, this microphone enables its user to record itself/herself while jamming to his/her favorite songs.  As its manufacturer claims this unit is capable of offering a frequency response that is tailored for vocals. What is more, the model also has brightened midrange as well as bass roll off.
This final trick is pretty cool for live use because these effects are very efficient, which means that you can have several tracks of 'racks' without straining your CPU. Go to the Mixer tab at File/Preferences/Project, and check 'Enable Solo on Selected Track'. Solo a track, and now all you need to do to call up a new sound is select a track, and the Solo will 'move' to that track. The change from one sound to another is instantaneous. Now it's time to amaze your audience!    
Rack-mount gear has become somewhat of a lost art for guitar players since the late 90’s. Nonetheless, rack gear is great for people who want programmability of preset tones, the ability to interchange components, and those who love seeing bright lights flicker as all of your gear goes to work! So for the rack-gear heads that still exist on this earth, we’ve compiled what we think are the 10 best rackmount pre-amplifiers of all time.

Ibanez is the most important Japanese guitar brand, and this new book tells the story of the electric guitars the company has made since the late 50s. The story tracks the fortunes of Ibanez from its early years as a copier of prime American models to later success as a creator of impressive original designs. The big break came in the late '80s with the launch of Steve Vai's JEM models and the related RG design, which have ensured Ibanez's popularity among metal and extreme rock players. Players include George Benson, Phil Collen, Allan Holdsworth, Pat Metheny, John Petrucci, Lee Ritenour, Joe Satriani, John Scofield, Mick Thompson, and more, many of whom are featured or interviewed for this book. With a gallery of full-color pictures of famous guitars and players, a reference section detailing production years and specifications, and a section covering how to interpret serial numbers. 160 pp.
There is one musical virtuoso whom I would added to this list, if for no other reason then the fact that the 2nd guitarist on the list thru his comment, seemed to hand the title as “greatest guitatist on earth” to this guy. This same individual has often been compared to the one who holds the crown- Jimi. And yet, arguably should not be in this list due to the fact that he was much more than a Master of the guitar, he mastered vurtually over 30 other instruments he played, sold almost Every concert he performed world wide, and… Read more »
Delay pedals take your original signal, a guitar chord or note for example, delays it and plays it back exactly how the pedal hears it the first time. It can either play the note back once or multiple times depending on your settings or “feedback time”. Often, you’ll see Digital Delay pedals as well as Analogue Delay pedals. The major difference is that digital delay pedals will offer longer delays and a ‘cleaner’ exact sound, however guitarists often prefer the analogue sound for all the subtle nuances and slight unpredictability in sound. This comes down to personal preference but both options sound great.
Another good reason to go with this type of acoustic guitar is the fact that there aren't really any significant reasons not to. These days, an acoustic electric model won't be that more expensive, and having the electric option available is priceless. You can get them really cheap, but just like with anything else, quality of the system will depend on the price. It's the little things that I appreciate, like the built-in tuners, besides the main feature. These tiny details bring so much convenience that traditional acoustic guitars lack that can save the day, like when you forget to pack your nice guitar tuner in your gig bag.

Having tried out this technique, I have to say that it's something of a revelation to hear the enormous range of radically different sounds it makes available. When you start inverting the phase of a mic, it sounds like the most extreme EQ you've ever heard, which means that you can substantially reinvent guitar sounds at mixdown without using any heavy processing. For even more sonic mileage, you can also take a leaf out of John Leckie's book and process each of the three mic signals independently.
In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash's Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash.
Originally started as a replacement parts shop in Japan, ESP Guitars – which stands for Electric Sound Products – got their guitar manufacturing business off to a rocky start here in the United States. They were taken to court by Gibson guitars for producing instruments that too closely resembled the American brand’s guitars. But, they settled out of court in 1978 and ESP’s reputation eventually grew, thanks in part to George Lynch, the guitarist for the 80s metal band Dokken, and his signature axe pictured here – The Kamikaze Model 1. Now, ESP guitars are wildly popular amongst metal and hard rock clientele and you can hear their instruments on the records of some of the brand’s loyal artists – including the likes of James Hetfield and Kirk Hammett of Metallica, Page Hamilton of Helmet, and the guys in Children of Bodom.
While jazz can be played on any type of guitar, from an acoustic instrument to a solid-bodied electric guitar such as a Fender Stratocaster, the full-depth archtop guitar has become known as the prototypical "jazz guitar." Archtop guitars are steel-string acoustic guitars with a big soundbox, arched top, violin-style f-holes, a "floating bridge" and magnetic or piezoelectric pickups. Early makers of jazz guitars included Gibson, Epiphone, D'Angelico and Stromberg. The electric guitar is plugged into a guitar amplifier to make it sound loud enough for performance. Guitar amplifiers have equalizer controls that allow the guitarist to change the tone of the instrument, by emphasizing or de-emphasizing certain frequency bands. The use of reverb effects, which are often included in guitar amplifiers, has long been part of the jazz guitar sound. Particularly since the 1970s jazz fusion era, some jazz guitarists have also used effects pedals such as overdrive pedals, chorus pedals and wah pedals.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}