One trait of most ribbon mics is the figure-of-eight polar response, and this is often exceptionally consistent across the frequency range. This polar pattern means, of course, that ribbons tend to pick up a little more room ambience than cardioids, given that the polar pattern is as sensitive behind the diaphragm as it is in front. Ribbon mics are also often characterised as sounding 'smoother' compared with typical condenser microphones, partly because their construction avoids the high-frequency diaphragm resonances normally inherent in condenser designs.
The origins of the modern guitar are not known with certainty. Some believe it is indigenous to Europe, while others think it is an imported instrument.[32] Guitar-like instruments appear in ancient carvings and statues recovered from Egyptian, Sumerian, and Babylonian civilizations. This means that the contemporary Iranian instruments such as the tanbur and setar are distantly related to the European guitar, as they all derive ultimately from the same ancient origins, but by very different historical routes and influences.

Companion to the TG-64 was the TB-64 bass. This was virtually identical to the guitar – including the three pickups and monkey grip – except it was a bass, so it had no vibrato. Two other basses debuted in ’64, the NB-1 and NB-4. These were basically the same guitar as the TB-64 except they did not have the handle cutout in the body. The NB-1 had a single pickup and the NB-4 had two.
This general tip applies to all so-called temporal effects. Anything that messes with the timing of the signal should come last. If you were to put reverb before distortion, which is often one of the first effects in a chain, that distortion would be applied to both the original signal and all of the echoes. In other words, you’d get a mess. Naturally, this isn’t a rule written in stone. There are always exceptions. However, it is best to start with reverb at the end as this is the most neutral position.

Original Stratocasters were shipped with five springs anchoring the bridge flat against the body. Some players removed the backplate covering the bridge to remove two of the springs and adjust the claw screws to allow the bridge to ‘float,’ with the pull of the strings in one direction countering the pull of the springs in the opposite direction. In this floating position, players could move the bridge-mounted tremolo arm up or down to modulate the pitch of the notes being played. Jeff Beck and Ike Turner used the Strat’s floating tremolo extensively in their playing. However, other players, such as Eric Clapton and Ronnie Wood, disliked the floating bridge’s propensity to detune guitars and inhibited the bridge’s movement with a chunk of wood wedged between the bridge block and the inside cutout of the tremolo cavity and by increasing the tension on the tremolo springs. These procedures lock the bridge in a fixed position. Some Strats have a fixed bridge in place of the tremolo assembly; these are colloquially called “hard-tails.” Luthier Galeazzo Frudua has said the floating tremolos can have stable tuning through techniques specific to a floating bridge.[8] The Stratocaster features three single coil pickups, with the output originally selected by a 3-way switch. Guitarists soon discovered that by jamming the switch in between the 1st and 2nd position, both the bridge and middle pickups could be selected, and similarly, the middle and neck pickups could be selected between the 2nd and 3rd position.[9] This trick became widespread and Fender responded with the 5-way pickup selector (a standard feature since 1977), which allowed these tonal combinations and provided better switching stability.
This can all get a little tricky and can become overwhelming especially if you have never tackled this type of job before. If this is the case, I strongly suggest starting with one of the easier models in regards to wiring e.g. Telecasters are significantly easier to work on as the scratchplate will often be pre-loaded with pickups. However, if you purchase a kit guitar such as an LP or you want to upgrade your electrical components (which is often the case with an entry level kit) understanding some basics about guitar electronics is useful.
THIS DELUXE PACKAGE INCLUDES - GIBSON'S LEARN AND MASTER GUITAR PACKAGE - PLUS 10 ADDITIONAL WORKSHOP DVDs. THIS IS THE MOST COMPLETE INSTRUCTIONAL GUITAR PACKAGE YOU CAN BUY. Winner of the Acoustic Guitar Magazine Players' Choice Award, two Telly Awards and an AEGIS Award for Excellence in Education, Learn and Master Guitar is widely recognized as the best home instruction course for learning guitar available anywhere. This deluxe package consists of 20 professionally produced DVDs, 5 Jam-Along CDs, a 100 page lesson book, and a free online student support site. It is the only instructional package you'll ever need on your journey toward mastery of the guitar.
Very well cared for electric guitar.  Very light with a good tone provided by the maple neck and mahogany body. The S520EX features a thin, sculpted mahogany body bolted to a maple Wizard II neck with a 22-fret rosewood fingerboard with binding and claw scratch inlays only at the twelfth fret. Components include a pair of Ibanez Infinity covered humbucking pickups and a ZR ball-bearing pivot double locking tremolo bridge with a ZPS2 tuning stabilizer.

This is a great opportunity to start working with a digital multimeter (DMM). Track down an inexpensive DMM and make sure it has a continuity function, preferably with an audible connection indicator. You can then trace how switches work by connecting the individual lugs to your DMM and seeing which are connected, and then switching to the other position and taking the same measurement again. The beep that sounds when you’ve made a connection is a great help when you’re taking these measurements.

My 15 year old daughter recently renewed interest in the guitar she had bought a few years ago but had never really played much.  She was disappointed when she noticed the strings were loose.  We brought it here and Ted was so helpful and engaging. He recommended new guitar strings; normally you can buy the strings and do it yourself, or pay them to do it.  He readily understood that while my daughter didn't know how to do it herself, she would like to know. He showed both my girls how to string a guitar, talking them through each step while he expertly strung the guitar and got it in perfect tune. Ted teaches guitar and his tutorial was an excellent recommendation of his teaching skills.  He also threw in a cleaning cloth and gave us chocolates - how much better does it get than that?!
At the current time, the questions who really invented the electric guitar and why can’t be answered straightforwardly, as there is no clear answer to them. On the one hand, some people argue that the electric guitar was invented in 1931 by George Beauchamp with the help of Paul Barth and Harry Watson. At the time of the invention, Beauchamp was the general manager of the famous National Guitar Corporation.
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.

Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.

During the first three decades of the 20th century, with the rising popularity of Hawaiian and big band music in America, guitar makers built larger-bodied instruments, using steel instead of gut strings, and metal instead of wood for the guitar body. Around 1925, John Dopyera designed a guitar with metal resonating cones built into the top that amplified the instrument’s sound. That suited twangy Hawaiian and blues music but not other genres. Then, in the 1920s, innovations in microphones and speakers, radio broadcasting, and the infant recording industry made electronic amplification for guitars possible. The volume was suddenly able to go up: way up.
 How to Order Custom Guitar: THIS IS A PRE-BUILD PRICING. You will receive the custom guitar exactly as pictured. Please make sure to choose the required options marked with the RED ( * ) asterisks and it will compute automatically the options you choose. We also offer Optional Upgrades but they are not required. And then once you hit on Buy Now button, go to the top most portion of the website and you can see a cart image logo and click on that then you can see VIEW CART and CHECKOUT to determine the total cost of the guitar including the shipping and the discount.
I've only been playing guitar for 3 years but it seems like no matter what I do no matter what pedal I use I just can't get that real band sound like the heavy rock bands do on recording but when I tried a marshall that all went away. Marshall has the perfect distorted sound (overdrive) and for the price ha you just can't beat it. I'm getting a mg100fx half stack and it all totals out to only $400 plus this amp can get so loud you can play in a bar or club with only half volume

For under £400 you get a set of Paul Gagon-Designed Alnico Pickups which provide a massive sound ranging from smooth and cool surf rock to all out grunge distortion. The AW4470B humbucker in the bridge position is complemented by an AP4285B P-90 neck pickup which ensures you have an array of tones at your fingertips – ideal for clean and distorted amplifiers. The addition of a push/pull coil tap allows you to split the humbucker so you can enjoy the classic sounds of a single coil. A mahogany body and maple neck provide the resonance, depth and snap you need for a wide range of tones and the G&L Saddle Lock Bridge with its six individual saddles offer incredible intonation as the saddles actually lock onto the strings.

Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.
View a complete range of budget friendly electric guitars over at PMT Online today or call in to your local PMT store to see a full range. We have many electric guitars spanning all budgets, styles and genres including a complete range of guitar starter packs. Alternatively, call 0151 448 2089 to speak to one of our guitar experts to discuss your needs.
National did not seem interested in the project, and, as we’ve seen, Beauchamp and Barth left National that year to begin Ro-Pat-In with Rickenbacker, where they used their ideas on the development of the new Electro electric Hawaiian aluminum “frying pans” and Spanish guitars. Again, some disagreement exists regarding the relative roles of Beauchamp and Rickenbacker in the development of these guitars, but, again that’s a different story. Beauchamp applied for a patent on his “frying pan” on June 8, 1933, and again on June 2, 1934, eventually receiving the patent on August 10, 1937.
Chord CG-10Classically styled guitar combo in a vinyl covered cabinet with metal corner protectors and basket-weave style grille cloth. Front control panel is recessed with retro "chicken-head" control knobs and additional features for Gain, EQ and outputs. Custom solid-state circuitry is voiced to produce authentic vintage-style clean and driven tones.•Headphone output for practice•Switchable clean and drive channels•Classic styling•Power supply; 230Vac, 50Hz (IEC)•Model: CG-10•Output: 10Wrms•Speaker; 165mm (6.5")•Controls: Gain, drive switch, volume, treble, middle, bass•Connections: Guitar input, headphones out (6.3mm jack)•Dimensions; 290 x 280 x 150mm•Weight: 4.0kg
The Hummingbird Pro is a distinctive square shoulder dreadnought acoustic electric. This lack of cutaway does have some playability disadvantage, but what it does mean is that the tonal quality is absolutely amazing throughout the entire range. Whatever sound you want to get out of the Hummingbird, you can, and the excellent L.R. Baggs Element pickup does a great job of translating that to an electrical signal.
Not everyone has the luxury of drum booths and separate rooms, but isolation boxes are great for isolating guitars during a rhythm track recording. They are also ideal for home recording, allowing a good  volume level without disturbing neighbours. Isolation boxes are commercially available, but can be expensive; try making your own from wood and foam.
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD
I, too, am searching for more info on my Kent. It's a Model 834, violin shaped with a cutaway. Mine is red with "racing stripe" binding on the edge. It's sounds INCREDIBLE (very vintage) and plays well, though I find the neck very narrow. There was an E-Bay auction for a couple of framed ads which featured this model, plus the 833, 835 and 836 from 1967 (one of the pictures, from what I could tell, looked exactly like mine). I also tracked down a picture of one that is a Yellow 67 with a Bigsby-Style vibrato (mine lacks this). If anyone finds a source for more Kent info, I'd love to hear from you...
A lot of people begin with a nylon string acoustic, often called a classical guitar. They’re reasonably priced at beginners level (don’t go too cheap), the design has a wide fret board to accommodate your inexperienced fingers and the nylon strings are easier on your aching fingertips. You have to agree, they can sound kind of dull unless that dream of yours is of becoming a famous, classical guitarist like John Williams — certainly not a bad thing. So nylon string acoustics are great to learn with, but there’s a risk you’ll want something more pretty quickly.
: : : Does anyone know for sure where these originated. I have been told Vox (the England years) made this flat bodied plank guitar in the skiffle days of early 60's/late 50's. Mine is painted white(by hand) with a large black pick guard that curves to envelope the two chrome "toaster" pickups ,bottom of neck, and three control knobs.The strings have a moveable maple bridge(not secured) and a small chrome hardtail heel.The neck has a zero fret at top and 19 more playing frets.There are dot inlays at the 3rd,5th,seventh,ninth,12th,and 17th frets.The headstock is of natural finish light maple with a top edge cut at a sloping angle like Hofner.It has brass tuning pegs,gears and gear plates and the keys are white plastic.The beautiful short neck is true ,natural maple.Along one of the tuning gear plates is the numbers: 35515 which are etched into the wood. Four bolts without any plate hold the neck base to the plain body and a green decal above the pegs at top face of headstock reads: Shadow. The fret board is rosewoodand is laid on neck without bindings.It has six strings and sounds like a short scale Baritone guitar. It also only has one strap peg at bottom since they used to put the other end of strap on a tuning key. No other holes are seen for any former peg at other end of body(where normally found). Please send any info on this small,early,simple but awesome sounding electric skiffle guitar from England(Vox?).Thanks!!!!! VoteinNovember