The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named “Killer,” “No Remorse,” and “Murder One". The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
Based on SGM-v2.01 (http://www.geocities.jp/shansoundfont/) with improved quality aoustic guitars (21mb) and basses (50mb) and also designed to run on apps such as Sweet Midi Player. This is a great GM SoundFont and the one I use on iPad/iPhone and PC. You can comfortably run this GM Soundfont in Sweet Midi Player app on most iOS devices. For Windows PC you can install a new GM soundfont using the free program Coolsoft VirtualMIDISynth.
High-end solid-state amplifiers are less common, since many professional guitarists favor vacuum tubes. Some[who?] jazz guitarists favor the "cleaner" sound of solid-state amplifiers. Only a few solid-state amps have enduring attraction, such as the Roland Jazz Chorus. Solid-state amplifiers vary in output power, functionality, size, price, and sound quality in a wide range, from practice amplifiers to combos suitable for gigging to professional models intended for session musicians who do studio recording work.
Before diving in, it’s also worth mentioning the “crap in, crap out” rule, which dictates that any recorded track is only going to sound as good as the guitar and amp that it captures, however good your mic or skilled your engineering. You can’t expect elevated studio technique to convert junk tone or a mediocre performance to stellar sounds in the mix; the best you can hope for is to accurately capture the sound being made by your amp, and to do so with optimum depth, dynamics, and fidelity. Of course, it’s possible that the crappy, low-grade junk tone you capture from a scuzzball rig is exactly what the recording demanded (Jack White or Dan Auerbach, anyone?), but it will usually benefit the tune to capture it as powerfully as you can!
One very interesting and strikingly modern Teisco guitar, the YG-6, appeared in Japan in 1965. It was very near the classic Strat shape, with offset double cutaways and Strat-like contours, but the horns were more pointed. The neck had the new hooked headstock and the rectangular edge inlays. A large multi-laminated pickguard stretched from the upper horn down to the lower bout control extension. Three large rectangular single-coil pickups, with chrome sides and black center insert (exposed poles) sat in front of a roller bridge and the clever platform vibrato design. Three on/off rocker switches sat above the strings, plus a small sliding switch, presumably a mute. It had one volume and one tone control, and is an exceptionally handsome guitar.
On PremierGuitar.com, "Sponsored Content" refers to articles, videos, or audio recordings that are produced or curated by an advertiser but that Premier Guitar is happy to share alongside our own editorial content due to the Sponsored Content’s educational, musical, or entertainment value. Sponsored Content is clearly labeled everywhere it appears, and Premier Guitar's editorial department has no involvement in its creation.
These are hybrid tube and transistor amps. They are not emulators like a line 6 or other amps. They have 8 different analog amp circuits based on various amps, they don’t call them what they are but they are similar to Fender, Vox AC15, Vox Ac30, Dumble, Marshall and I think an Orange ( CLEAN1, CLEAN2, CRUNCH1, CRUNCH2, OD1, OD2, H.GAIN1, H.GAIN2). I don’t use the higher gain ones much - they are very heavy metal sounding. They also have very nice modulation effects - Chorus, Delay, and Reverb. I no longer use a separate chorus or reverb in my signal chain. The amp uses a 12AX7 tube pre-amp and the power amp which gives the tube overtones to the analog circuit you choose. Plus, you can bias the tubes to bright and power in both the pre-amp and post amp.
I knew what it is that I need to do. The friend who worked on it with me said when we were finished, "Oh right, it sounds like all your records all put together." I guess that got the job down. Without getting too technical about it or elitist, it kind of does the job of a Gretsch, sonically, and a Rickenbacker, sonically, but I play it like a Fender. It's kind of handy, really. I used to it pretty much exclusively during my time with Modest Mouse. And totally exclusively during my time with the Cribs. I've used it nearly entirely on the new solo record.
An overdubbing session is ideal for air-guitar miking because there is no leakage from other instruments. I usually prefer to maintain total isolation between the two sources, placing the guitarist and amp in separate rooms. But for some production styles, the acoustic air mic can also do double duty as a distant room mic for the amp, with the ratio of pick sound to ambience determined by mic placement and amp volume. I've recorded some very hefty-sounding rock 'n' roll power chording this way, as well as a variety of vintage-style solos and rhythm parts. At the board, a low shelving or low-midrange EQ cut, combined with a subtle high-end boost around 4 to 6 kHz, will usually help these tracks jump out of the mix.
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
At 10.8 pounds and 11.4 by 12 by 6.7 inches, the Crush 12 is one of the smallest amps we tested, so it’s easily portable and stashable—although with just 12 watts and a 6-inch speaker, it’s the least powerful of our top picks. It has a ¼-inch headphone jack but no line input, so you can’t connect a smartphone for play-along sessions. While our sample came in the company’s iconic orange color, it’s also available in black—although as Wirecutter editor-at-large Geoffrey Morrison put it, “Buying an Orange amp in black is like buying a sports car with an automatic transmission.”
Of course, no-one says you have to use the same mic on each speaker cone. For example the SOS interview with Toby Wright shows an SM57 and an MD421 on separate speakers, and Don Smith mentioned using an SM57 and an AKG C451 on separate speakers when recording Keith Richards. Sylvia Massy Shivy also uses the SM57+MD421 combination, but sounds a note of caution when deciding on the exact positioning of the mics: "You have to be very careful with phase, just check it until the signal is the strongest."
Gibson thought it was a good idea to label the switches to make using them more intuitive, the problem is that they don't really correspond to their use in praxis. The Rhythm label was justified back in the rock 'n' roll era (that of Guitar Slim not Boyz II Men), but the times have changed and nothing stops you now from playing a rhythm guitar in Treble position (metalheads love it).
I lost a wonderful EMPRO les paul custom model In a plain top brown finish (it was at a friends house in Dallas Texas who died in 2002 and was auctioned off before I could get down there from Michigan). It was my first electric guitar, bought at a pawn shop in Sulphur Springs, TX in 1989. I loved that guitar and have only seen about three other Empros since then. I did not see the Empro badge on this site. Anybody know the maker?
Flanger effects simulate the studio trick of repeatedly putting your thumb on a tape recorder’s reel for a second and then letting the reel (and music’s pitch) catch back up while a dry (unaffected) signal plays alongside. Flangers usually have a depth setting, which controls the intensity of the effect, and a rate control that adjusts the speed of the cycles.
Harmony was founded in 1892 in Chicago by Wilhelm J.F. Schultz. Sears acquired them in 1916. Harmony made guitars for others under many names, some of which they acquired from other companies due to bankruptcies. These include Oscar Schmidt, Stella and the Sears brand Silvertone. Harmony went out of business in 1985. A new company is currently selling guitars under the Harmony name – many of these are classic Harmony designs such as the Harmony Rocket electric guitar.
Setting up an electric guitar will bring out the true potential of that specific instrument. A poorly setup guitar will be harder to play due to high strings and neck bending, and will sound subpar with improper intonation. Electric guitar setup cost will cover all of these adjustments and more. For a price close to $50, your guitar will also have its neck adjusted so that the playability is as good as possible over the entire fret board. In the ideal setup scenario, the string height will be optimized so that playing is easy. The height of the strings should also provide for the best sound as they are able to ring free of the frets, allowing for the cleanest and strongest possible signal for the pickups to capture.
Their designs do not require them to have comparator inputs as with solid-state amps. The small amount of negative feedback in valve amps is only required to provide damping to the speaker. Valve Amplifier Design From physics we know certain things must be a particular order and size to be efficient and this is acutely so with valve amps. 60Watts is the minimum power capacity for an amplifier to bring quality speakers to life with full fidelity.
no. first of all a bass guitar has 4 strings and a guitar has 6 strings second, u couldn't tune the guitar open notes a whole octave down to create the bass notes as the strings would be too loose. although you can play bass songs on a guitar but it wouldn't be as deep a bass. Actually you can. depending on the kind of way your guitar is built you can remove your guitar strings and replace them with bass strings and finally adjust the setting on your amp so you can have a rich full tone. I have a Fender Squier and made it into a bass by replacing the strings and adjusting the settings on my amp. WARNING: you NEED to know if your bridge or the place where you put the bass strings through can hold the pressure the bass string apply.
Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
An electric guitar is a guitar that uses one or more pickups to convert the vibration of its strings into electrical signals. The vibration occurs when a guitar player strums, plucks, fingerpicks, or taps the strings. The pickup used to sense the vibration generally uses electromagnetic induction to do so, though other technologies exist. In any case, the signal generated by an electric guitar is too weak to drive a loudspeaker, so it is fed to a guitar amplifier before being sent to the speaker(s), which converts it into audible sound.
I love this little guitar. it's perfect for my smaller hands to move around on the fretboard. I've been taking guitar lessons for a year and own a full size acoustic and a electric but I love that this one is both. For the price I wish it came with a stand and cable for an amp though but it's a great starter guitar for kids or a person with smaller hands. I would recommend it. it's acoustic and electric. You will need to buy an amp with a cable to use it as an electric but no cable is needed for acoustic. It even has a built in tuner, they supply the batteries.
How does it sound, you ask? Guitarists generally agree that Line 6 tones are as good, if not better, than any digital sound out there from the likes of Boss and DigiTech. One really cool and intuitive thing is that the small display screen has a color-coded background depending on what type of effect you’re on. It’s a little thing, but such smart thinking from Line 6. Delays are green, Modulations are blue, Distortions are yellow, Filters are purple, and Reverbs are orange. Modulations and delays sound fantastic, and will stack up against a Line 6 DL4 or Boss DD-X box any day. Compressors, overdrives, fuzz, and distortions are usable but less than stellar, which unfortunately is the norm for digital effects. We actually tried using the Line 6 M5 with a solid-state amp, and the dirt effects sound much better going into that than they do into a tube amp (your milage may vary). Remember, this is not meant to replace your entire board. Over time, if distortion is your thing, you can get a dedicated analog distortion stompbox and keep the M5 for the other dozens of effects it does really well. For effects like volume and wah, you’ll be glad to know the M5 has an input for an expression pedal, which you’ll want to invest in if you care to use those types of effects (check out the EX-1 here if you care to stick with Line 6). If you don’t feel like editing patches and want to jump right in, you get plenty of presets to scroll through (the two footswitches let you scroll up and down between patches). Some presets are a little outrageous, but with a little editing you can reel them in and make them more usable. And speaking of scrolling up and down through presets, at first we were disappointed that we had to scroll through all 100+ patches to find the ones we like. Turns out you can make a favorites list of up to 12, and scroll only through those. Again, we’re continually impressed by the little things on the M5.
The basic function of the volume knob is to change the level of your guitar’s volume output in a smooth and even way. But there’s more to it than that. Some players use the volume knob as a means of boosting their signal to make solos pop out. For example, if you keep your volume dialed in at seven or eight and perhaps lean on your amp a little more for output, you’ve got two or three more notches to ride your loudness up via the knob when it’s really time to burn. No need to spend money on a volume pedal, and unlike distortion or overdrive pedals this doesn’t change your sound much.
One of the best known Kay electric guitars during the 1950s was the K-161 "Thin Twin", most visibly used by blues artist Jimmy Reed. This instrument debuted in 1952, and featured a single cutaway body, a distinctive "fire stripe" tortoiseshell pickguard, and a pair of thin blade-style pickups that gave the guitar its name. Kay used this type of pickups on various Kay electrics dating back to the 1940s.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.
The Effect: Compression rose to fame in the rock and roll era, many famous musicians used (and still do) compressor pedals in order to add distinctive sustain in their performances, attracting the listener’s attention and making them stand out from the diverse instruments playing along. Some of the most famous compression pedals are the “Ross Compression” and the classic “MXR Dyna”, which have been subject to imitations and remakes ever since their original releases. Compression pedals have remained popular to this day, and are considered a must-have in many guitarist’s arsenals.
There was no “Kent Guitar” Factory. The Kent brand was established in 1960 by Buegeleisen & Jacobson, a musical instrument distributor in New York City. The 500-series models had a metal “K” badge (like the one at left) attached to the headstock of the guitar. The use of a glued-on logo is a good sign that the guitar could appear under another brand name if the manufacturer so desired. The 600-series Kents had the name in metal script letters attached (probably glued) to the headstock. The 500 and 600 series guitars were almost identical. The headstocks were somewhat shaped like those on Fender guitars. Most of those were low-end solid-body instruments.
Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”
Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.
The use of "full range, flat response" (FRFR) amplification systems by electric guitarists has received an extra impetus from modeling amplifiers. Before widespread availability of modeling, guitarists did not commonly plug electric guitars straight into PA systems or powered speakers, because most genres relied on the tonal coloration of a regular guitar amplifier setup—from the preamplifier, equalization filters, power amp, guitar speakers, and cabinet design. The FRFR approach assumes the tone is shaped by sound processors in the signal chain before the amplifier and speaker stage, so it strives to not add further coloration or dedicated combo-style amplifiers with a broad frequency range. Such processors can be traditional guitar effects, a modeling amplifier (without power amplifier), or a computer running tone-shaping software. Using a modeling amp or a multi effects pedal used with line level output, a guitarist can plug in the guitar into a flat response mic input or into a keyboard amplifier.
I believe its an 80's model it has some wear n tear but makes it look good and ventig. But there is nothing on it but the bently sign on the headstock.its jet black has a bridge not string through. Two hummbuckers I guess. A treble and rhythm switch up by the neck on the top. It is a 22 fret with pearl inlays. Someone shoot me an email n ill send picks of it. Just want to know what I got my hands on.
You've come to the right place. We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments. We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll. Please browse our web site, give us a call or visit our Chicago show room. We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.
Our fretwork is one of the things we are most proud of. We go to the extreme to make sure that your guitar is going to play the best it can. The fingerboard is planed under tension. The fretting process is done with epoxy fretting. We use a special blend of epoxy that makes re-fretting very easy without messing up your fingerboard. This process is used for multiple reasons. One of the advantages to this type of fretting is that you lose the hollow gaps under the fret that you find with the traditional way of fretting. In traditional fretting, with each fret you put on, it is like driving a wedge into the fingerboard, which causes back tension on the neck. With epoxy fretting, all of these issues are eliminated. The epoxy under the frets helps to transfer string vibration throughout the neck to the body, and relieves all stress and tension on the neck that occurs with traditional fretting. This results in a stress-free neck, which allows the truss rod to work properly and to adjust the neck accurately.
Tuner: If you’re new to guitars and playing music, there is absolutely NO way that you know how to recognize all the notes by ear and tune your guitar without a tuner. Even if someone tunes the guitar for you at the shop, it will get out of tune by the time you’re home, so this one’s an absolute must have. Hang on for the price until we discuss the next device.
Launch price: $779 / £849 | Body: Mahogany with maple top | Neck: Maple | Scale: 25" | Fingerboard: Rosewood | Frets: 24 | Pickups: 2x 85/15 'S' humbuckers | Controls: Volume, tone (with push-pull coil-split), 3-way selector | Hardware: PRS vibrato, PRS SE tuners | Left-handed: Yes | Finish: Fire Red Burst, Tobacco Sunburst, Trampas Green, Whale Blue
Chris Broderick (b. 1970) is the lead guitarist for Megadeth, formerly of Jag Panzer and Nevermore. His main guitar was a 7-string RG model. During the recording of Endgame, he started using 6-string Ibanez S series guitars, which are painted with artwork from various Megadeth albums. This is because Dave Mustaine didn't want Broderick to use his 7-strings in the studio. He has since switched to Jackson Guitars.
Tremolo – Not to be confused with a tremolo bar (which is closer to the Whammy pedal), this effect works on volume. You can think of tremolo pedals as being like strumming a note, and then wiggling the volume knob on the amp while it’s ringing. Usually, the pedal will have controls for speed (equivalent to how fast the volume is “wiggled”) and depth (equivalent to how far the knob would be turned).
One of two guitar plug-ins that we’ve carried over from last year, VB-1 is one of the older plug-ins that Steinberg once sold and, along with the fantastic Model-E synth, is still available for download. As you might expect from the picture and the name, it emulates a proper bass guitar – not the easiest instrument to properly reproduce electronically.
We think this is one of the best multi-effects pedals as it’s packed to the brim with a range of classic and modern Boss effects. In fact, there’s eight simultaneous effects categories that can work in unison, and each of those categories has multiple effects types within. This means you have access to a vast array of Boss effects as well as COSM amps derived from the Boss GT-100.
alright dude, i think this an awesome list. i hate looking things like this and seeing people put crap like slash at number 1 or something. this shows u obviously have great taste in music, but theres just a few things that struck me as odd. 1, no chuck berry. 2, really? john mayer? i admit he has technical skill, but saying hes one of the 10 best guitarists thats ever lived? thats just false. i mean what happened to jeff beck, santana, , eric clapton, harvey mandel, kurt cobain, and even trey anastasio(if that is how its spelled lol). they are all much much better then mayer could hope to be, both musically and technically,.
Great for beginner guitar players, the electric guitar packages/electric guitar kits give you all the essential tools that’ll help you get started on your musical journey. These electric guitar packs typically include an electric guitar, a guitar amplifier, and various must-have guitar accessories including guitar picks,guitar straps, and an electric guitar gig bag.