It mostly comes in black color. it is a right handed 6 string electric guitar. The body is given a polyurethane finish whereas the neck is given a satin finish. The fret board is composed of 24 frets and has a master white tone. The guitar is relatively affordable, with prices ranging from around INR 15,642. For stage performances, this guitar will give you a nice experience and a classical feel.
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.
In some modern valve effects, the "dirty" or "gritty" tone is actually achieved not by high voltage, but by running the circuit at voltages that are too low for the circuit components, resulting in greater non-linearity and distortion. These designs are referred to as "starved plate" configurations, and result in an "amp death" sound.[citation needed]
The Les Paul 100 by Epiphone is an entry level electronic guitar. The body is made of mahogany which is known for warm/balanced sound with a good sustain. The rosewood fretboard enhances the sounds and sustains. A C-shaped neck provides the beginner with incredible comfort. Finally, this guitar features two humbucker pickups for clean and great sound.
{ "thumbImageID": "Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire/J25053000005000", "defaultDisplayName": "Epiphone Sheraton-II PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Sapphire", "sku": "sku:site51500000240440", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire-1500000240440.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Midnight-Sapphire/J25053000005000", "brandName": "Epiphone", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51435592256803", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Natural-1435592256803.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Natural/J25053000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51435592256787", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Vintage-Sunburst-1435592256787.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Vintage-Sunburst/J25053000004000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51435592256739", "price": "549.99", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Ebony-1435592256739.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Ebony/J25053000002000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51435592256723", "price": "699.00", "regularPrice": "699.00", "msrpPrice": "1,165.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Sheraton-II-PRO-Electric-Guitar-Wine-Red-1435592256723.gc", "skuImageId": "Sheraton-II-PRO-Electric-Guitar-Wine-Red/J25053000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

No, could it be!? Finally we see a brand that does not come from England nor the US, but from Germany. ENGL specializes in tube amps for high-gain and heavy-metal. Its most famous users are Ritchie Blackmore and Steve Morse (Deep Purple), Alexi Laiho (Children of Bodom) and Chris Broderick (Megadeth). Both past and present Deep Purple members even have their own signature model. And there's also the standard Powerball, Fireball, Classic, and Invader series.
Unfortunately, National’s line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost if it was going to succeed against rival manufacturers. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929, and he subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929 with Dobro suing National for $2,000,000 in damages. Problems within National’s management as well as pressure from the deepening Great Depression led to a production slowdown at National, and this ultimately resulted in part of the company’s fractured management structure organizing support for George Beauchamp’s newest project: the development of a fully electric guitar.[5]
Enough with the American brands, haven’t the rest of the world got something to offer? Well, Japan has come up with a few! Ibanez for example offer amazing guitars, and when they first started out the original idea was actually to offer good copies of American electric guitars! Today they have moved on to doing their own thing, and produce excellent guitars.

One detail is the rating, honestly there is no right or wrong here really, it's down to personal preferences. A .022uF capacitor will roll off less treble frequencies than a .047uF, so you'd perhaps notice a more prominent drop in treble when rolling a tone pot down which has a .047uF cap wired to it than you would if it was a .022uF. This to me is an important detail to consider when choosing the right cap for you, but if you're still not sure, the general rule is .022uF for humbuckers and perhaps P90s, and a .047uF is used primarily for single coils. This isn't set in stone though, so perhaps consult your pickup manufacturers recommendations first. If you want any help in choosing the right rating for your harness though, I'm very much here to help, so by all means drop me a message!
I have been using a Belcat tube 50R guitar amp. I've owned all the top amps,Fender, Marshall,Mesa,Peavey. This Belcat amp,with pedals, is one of the best sounds I've ever gotten. It's not heavy like a twin,and the clean sound is great, although it's hard to beat a Fender Super reverb,or a twin for pure tone,but I don't like how Fenders sound with distortion pedals. I have a Marshall Combo and a Blackstar HT Club 40,love them both,but I've been using the Belcat. It's distortion,on it's own,is a blues type, not heavy, but with a Rat it screams, or a Boss Blues driver,or Ibanez Tube Screamer,you can get just the sound you're looking for. Too bad they're not making them anymore, it's really a good amp!

We are very proud to present to you a pleasant surprise I must say from way back when folks this is prime Time beginning of that Golden Era of some of the GREATEST QUALITY Acoustic guitar that FENDER ever had the smarts to Import… that’s right these are Japanese crafted beauty’s . Built back in the day when Japan had the economy riding high while US guitar builders were getting bought out by business folks not guitar builders and US economy was in the tanker just a little brief history reminder… Fender & Gibson were under the gun to cut costs and re-structure if they wanted to stay alive and that they did…. CBS , Norlin…. And others cut back on the high quality woods they once enjoyed and relied upon the reputation the US had for making great guitars basically reputation from the late 50’s – early 60’s To about 68-69 or so…. Then quality went down no doubt…. Right then it was prime time for Japan Luthiers to strike and they did…they stepped up the quality from the funny toy grade guitars we saw here in the states back when I was a kid you could get a decent cute player electric guitar at the Pawn shop in about 1965 for about $69.00 in fact my dad bought my 1st electric guitar there for $69.00 … I loved it—it was a “ KENT” and it sounded very good threw my Silvertone amp….. ..Kent is a offspring of Greco which is a factory behind making many brands buildby Fujigen Gekki…. Ok what this Fender beauty traces back to the great FujiGen Gakki in 1974 according to its serial number… making this beautifully preserved SOLID TOP Vintage Japanese guitars 40 years old a true vintage guitar in its own right. It was during the time when this guitar was built that the Japanese Luthiers set out to make some of the most righteous guitars period… fit – finish - workmanship & materials used are the good stuff folks….. This full size Dreadnought Acoustic guitar is a replica of the Martin designed D-28 known to be one of the finest most prolific designs the US Martin & co ever produced. This Fender F310 is of a High Quality example, The top is Solid Spruce straight grained with some nice figure and wow it has 40 years of patina to its color and finish and overall vintage appeal is Very strong… I was drawn to this example it sounds deep and rich and complex with an excellent volume And its highs ring threw when cording and finger picking , This guitars Back & sides are true to the masterful D-28 desigh …. High quality ROSEWOOD just beautifully grained see the pics for more detail Its absolutely beautiful back – sides are all east Indian Rosewood the fingerboard may be Brazilian Rosewood by its looksa very high grade non theless, the bridge appears to be Ebony wood….. the Bridge is nice and flat to its top which is also nice and straight, action is very good medium low and adjustable. The top has a couple of minor doinks see the pics not bad at all and certainly nothing remotely enough to detour from its vintage Gorgeous looks , no cracks anywhere found , bindings are very food, overall this guitar is an EXTREMLY CLEAN example aside from the afore mentioned . This guitar is in top Vintage used condition and is easily a 9//10 Fit and finish I suggest this was built but a high level Journeyman and can compete or compare with A nice vintage Yairi or Morris or Gibson or Martin for that matter…. .
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.

Meanwhile, in Sepulveda, Thomas Organ, after importing JMI's British-made amps for a short period in 1964–65, began to produce a line of mostly solid-state amplifiers in the United States that carried the Vox name and cosmetic stylings. With some assistance from Dick Denney, these amps effectively paralleled JMI's own transistorised amplifiers but were different from the British and Italian made Voxes in sound and reliability. To promote their equipment, Thomas Organ built the Voxmobile, a Ford roadster dressed up to look like a Phantom guitar, complete with a Continental organ and several "Beatle" amplifiers. Despite the huge marketing effort, Thomas Organ's Vox products did much to damage the reputation of Vox in the North American market for many years. By 1968, the company had also marketed a line of Vox drum sets (actually made by a German drum company, known as Trixon), which included a kit that featured a conical-shaped bass (kick) drum, that looked more like a wastepaper basket left on its side, and another with a bass (kick) drum, that looked like a flat tire. Such gimmicks did not help sales, and by the early 1970s Vox's American presence was virtually nonexistent.
The distortion effect was first created back in the 1950's by overdriving the tubes of a guitar amplifier, usually by turning an amp all the way up. This caused the guitar signal to distort or "break up." While this effect was originally considered bad by amp manufactures, early rock players found it exciting since it provided a new tone for the electric guitar's sonic palette. A tone that had an edge and power that fit perfectly with the new type of rock playing that appeared in the 1960's. As amplifier manufacturers embraced distortion, they began adding more gain to their amps, which resulted in more distortion and lead to styles such as metal and shredding. Pedals have been created to simulate all these types of distortion.
Some professional-grade amp heads, such as Ampeg's SVT400-PRO, have an audio crossover, an electronic filter that enables a bassist to split their bass signal into a low-pitched signal (which could be routed to a cabinet suited for low-pitched sounds, such as a 1x15" or 2x15" cabinet), and then send the middle and high-frequencies to a different cabinet suited to this register (e.g., a 2x10" or 4x10" cabinet with a horn-loaded tweeter). Amps with a crossover can either have a single crossover point pre-set at the factory (e.g., 100 Hz) or a knob is provided to enable the bassist to select the frequency where the bass signal is split into low and higher-pitched signal. The SVT400-PRO has a user-adjustable crossover knob. Amps with an adjustable crossover point can enable bassists to fine tune the sound of their bass sound. For example, in some halls, a bassist's usual crossover point may sound too "boomy" or rumbly; turning the crossover knob to send more of the low-pitched bass signal through the 2x10" cab may reduce this problem.
A fantastic sounding unit and U2’s The Edge original delay sounds were a Deluxe Memory Man used on “I Will Follow” and “Sunday Bloody Sunday”. Some cool added features to the Memory Man is the added chorus effect you can put on the delays. This is one of the coolest delay pedals ever. Many pedals now digitally model the sound of an analog delay pedal and come very close with the added flexibility a digital delay pedal provides like extended delay times and tap tempo.
This category of effects pedals does what the name implies.  It tweaks the volume of your guitar signal in some fashion.  These typically come in this spot in the pedal chain (after everything but the time-based effects) so that any change to your volume is already receiving the effects of all the pedals before it.  You’ll be altering your entire signal minus delays and reverbs.

Southpaw Guitars has over 900 Left Handed Guitars and Basses In Stock at any time. At Southpaw Guitars you will find a knowledgeable friendly sales staff to provide Service, Assistance, and Guidance as you purchase your Dream Guitar. Furthermore, You will not be greeted by hold music, transferred between departments, treated discourteously, or given the sell what we have routine. We are conveniently located in Southwest Houston. 713-667-5791
For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.

The GRX70 showcases how good Ibanez is at producing great value guitars, they sure know how to keeps other guitar manufacturers on their toes. It has all the makings of a mid-tier instrument, complete with dive bomb capable bridge and great looking aesthetics, but packed inside a super affordable entry-level instrument. The basswood body with quilted art grain top is gorgeous, and a trio of pickups gives you tons of tones. A standard tremolo handles divebombing and other whammy acrobatics. This axe is perfect for burgeoning rockers who want a versatile guitar for all occasions. All in all, the Ibanez GRX70 gives you a whole lotta guitar for the money!.
The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
A sub-brand under the same umbrella as German brand, Behringer, Bugera has been flying under the radar for some time – though they make some surprisingly clever amplifiers. The BC15 is one such amp. Styled like its predecessors from the ’50s and ’60s, this vintage-inspired amp benefits from a single 12AX7 vacuum tube giving it a lot more warmth and character than for which you’ll pay. And don’t let its size fool you, either – while it only has a single 8″ speaker, it offers up a whopping 30 watts, making for a surprisingly loud little machine. For the price, it’s seriously difficult to do better than this.
An effects pedal signal chain is simply the order in which a series of pedals are connected. If you have ever seen a player use a pedal board, the order of his pedals make up his signal chain. And if by some chance you thought that you can simply place these pedals in any sort of order and still get the same results – think again! Even if you’re just working with two pedals, you will get a different sound depending on the order.
CF Martin & Co: When CF Martin & Co first started business, America only had 24 states in its union and Andrew Jackson had begun his second term as president. CF Martin & Co has seen two world wars, and huge economic peaks and troughs. The history of this guitar company is unlike any other, it’s the world’s oldest surviving guitar company in the world and the reason for so is they indeed make excellent guitars. When you own a Martin guitar you don’t just own a guitar, you own a small part of history.
The people at VOX know a thing or two about creating great sounding amps, after all the AC30 is probably one of the most famous amps of all time. The VOX Valvetronix VT40X modelling guitar amp actually recreates the sound of these great amplifiers and so many more. In fact, you have 11 famous amps to choose from which can expand to 20 when using the included Tone Room Editor as well as 13 effects built in. The hybrid digital/analog power amp provides you with all the warmth of a tube amp but with digital stability! If you want more power, you have the VOX VT100x or the smaller version – the VOX VT20X.
We're just over the £300 price tag here, but for the shredders and jazz fans out there, the Schecter C-6 Plus in Electric Magenta is a great option, whether you’re a beginner or pro player. It’s one of our favourite cheap electric guitars, and one hell of a performer, featuring professional level appointments inspired by Schecter's  Diamond Series guitars  – this is a monster of tone, and well worth the extra investment.
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
Check the action and clearance of the guitar strings by playing it before you begin setup. There should be 3/64-inch between the fret and the string on the treble side, and 5/64-inch on the bass side. Check that there is no buzzing when you play high up on the neck, and that the strings are not too difficult to push. If you hear buzzing, the neck must be corrected for underbow; if the strings are too far from the frets, the neck must be corrected for overbow.
Discrete models describing the low frequency behavior of stringed instruments have appeared in the technical literature for more than 25 years. These models are very useful in understanding the nature of acoustic-structural interaction, but only when they are correctly tuned to match the measured response of a particular instrument. The tuning process is easiest when FRF measurements are made... [Show full abstract]
Buddy Guy: ash body with a V-shaped maple neck featuring a 22-fret fretboard, three Lace Sensor “Gold” single-coil pickups and a 25dB active midrange boost circuit (USA, discontinued as of 2010), alder body with a V-shaped maple neck featuring a 21-fret fretboard and three standardalnico single-coil pickups (Mexico). Available in a variety of finishes, including black with white polka dots (Mexican Artist Standard), 2-color sunburst and honey blonde transparent (USA Artist).
The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.
I was a guitarist for almost 18 years now I am a session musician. For me choosing the best string gauge is one of the most important things a guitarist should know. During those early years our band tends to play on Heavy metal music and if you are using those lighter string gauge its ineffective for those kind of genres. So at that point I have been using .011 or .013 string gauges to gain fat tones and huge sustain. But however as years goes by we tend to play lighter music so I am using .09 and .010 string gauges. For me using those heavier strings for a long time will cause damage in your wrist, after acquiring a carpal tunnel syndrome I have used lighter strings in my guitar.
After being branched into ESP-LTD designs, the company made its signature guitars accessible to the masses. This was done by launching these guitars with the affordable price range. The design of ESP-LTD guitars is quite similar to the typical ESP designs like the Eclipse. Its ESP-LTD EC-1000 is a fantastic guitar model for rock, with high-quality features. In fact, if you are looking for something that could substitute the Les Paul guitar, EC-1000 will be the right choice.

Perhaps the most popular choice though is a paper in oil capacitor. I have tried so many brands and options, and truth be told, it's very hard to notice a substantial difference and you can, unnecessarily spend a lot of money on premium ones. I received so many requests for a PIO equipped harness, so in an effort to try and whittle my findings down to a good value, tight tolerance and good sounding paper in oil capacitor, I've settled with one made by WD Music USA which are superb. Compared to other PIO caps on the market, they're a reasonable price and importantly are tight tolerance meaning the key details about how it will react with a tone pot, is accurately presented. Again, no real right or wrong here, if your budget allows you to go crazy on capacitor choices, no one can tell you not too. But truthfully, just pay attention to the tolerances, as that will tell you the most about how it will 'sound'. 
Upgrading the components in your guitar’s control cavity should give you significant improvements in tone and component life. If your guitar has single-coil pickups, buy 250K pots. If it’s packing ’buckers, go for the 500K jobs. If your ax has humbuckers and single-coils, I recommend 500K pots. This could make your single-coils sound a bit brighter than normal, but it will unlock your humbuckers’ full potential. For this job you’ll also need a soldering iron, solder, safety goggles, wire cutters, and a camera, to help you keep track of your original wiring connections (your cellphone will work just fine for this).

From the jazz-tempered Artcore series to the metal-shredding Iron Labels and all of their rocking classic models, Ibanez electric guitars are definitely not confined to any one genre. You can play whatever music you like with the right Ibanez axe, whether you go for one of their off-the-shelf designs or the signature style designated by your favorite guitar hero.
The relationship between power output in watts and perceived volume is not immediately obvious. The human ear perceives a 5-watt amplifier as half as loud as a 50-watt amplifier (a tenfold increase in power), and a half-watt amplifier is a quarter as loud as a 50-watt amp. Doubling the output power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural compressor at high volumes.
Delay – a time-based effect that sounds like an echoing of your guitar tone. A delay pedal creates a copy of your guitar tone that repeats like a fading echo. Delay pedals usually have a time knob that allows you to choose the time of the delay intervals, an effect level knob that controls the volume of the delayed sound and a feedback knob that controls how many repeats are sounded before the effect fades. See different types of Delay below:
Martin Guitars has a storied history that dates back as far as the mid-1700s when Christian Frederick Martin was born to a family of modest German cabinet makers. At the age of 15, Christian Frederick traveled to Vienna and took up an apprenticeship with a renowned guitar maker, where he flourished in his craft. Years later and after a feud with the Violin Makers Guild, Martin decided to move his business to the United States, opening up shop in New York City. More than 100 years later (and through many trials and tribulations), Martin introduced their signature Dreadnought acoustic guitar, the same shape as the one pictured above. Funny thing is, it was actually based on a defunct style created by another company years prior. Now the standard for acoustic guitar shapes, nearly every manufacturer offers a version of the instrument made popular by Martin. Currently, the brand is run by Christian Frederick Martin IV, the 6th generation of the Martin family – and they’re still making some of the best instruments in the world.
Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.

What can we learn from these restaurant guests? The lesson is that we are very easily tricked into liking things we pay more for, even though they might not be that good after all. We get a particular feeling from thinking that we’re treating ourselves to something luxurious. If we, on the other hand, haven’t spent very much, we usually assume that it can’t be a good product.
Jump up ^ The little finger whose use is not completely standardized in classical guitar technique can also be found designated by e or x. There are several words in Spanish for the little finger: dedo meñique, dedo auricular, dedo pequeño, but their initials conflict with the initials of the other fingers; c is said to be the initial of the dedo chiquito which is not the most common name for the little finger; e and x are not initials but letters that were picked, either with its own rationale, by people who didn't know what else to pick
Like 39% of the people said, they are simply the worst. The first guitar I owned was the Ibanez Gio, I thought it was amazing. I play it every now and then, but not too much anymore. For its price, I think it is the best starter guitar, 10 times better than any first act. I owned a first act, it was the worst guitar of all time. Me finger killed after playing it because the strings are so hard to push down, the frets don't even stay attached to the guitar. All beginner guitarist, don't get first act.
Naturally, it all comes down to manipulating the effect to fit the occasion. There is definitely such a thing as too much reverb or not enough. However, this is the type of thing you will have to figure out on case to case basis. With that said, you would be surprised at just how often reverb is used in music these days. Some sound engineers and producers like to be subtle to a point where you won’t notice the reverb unless you are actively looking for it. Others tend to go overboard in order to express themselves.

New from Stewart-MacDonald are guitar wiring kits with the premium brand pots, switches, jacks, capacitors and cloth wiring used in original Gibson Les Paul and SG guitars. The kits make it easy to order top-quality components for wiring or re-wiring a 4-control / 2-pickup guitar with a 3-way switch. The kit components include Switchcraft toggle […]

The guitar is hand-made by Martin's top luthiers, using exotic cocobolo wood for the back and sides, mixed with a more conventional solid sitka spruce top. As expected from a high-end instrument, this guitar features impressive visual appointments, most notable of which is its ivoroid binding, beautiful rosette and fretboard inlays. While its price tag and looks may push you to just hide this guitar in the closet, know that this instrument is built to make music in the road or in the studio. Martin employed modern bracing and construction techniques to ensure the guitar stays reliable, beautiful and great sounding for a long time. Those that are lucky enough to own this guitar have themselves a treasure that they can pass down to the next generation of players.
Most pickup selectors are either mounted to the top of the guitar through a cavity routed in the back of the body or mounted to a pickguard. For pickup selectors that are mounted to the top of the body, simply take a screwdriver and unscrew the pickup selector. You will have to remove the knob on the end of the level before you can slide the selector through the channel and out of the cavity. For pickguard mounted selector, like Fender Stratocasters, you will need to remove the entire pickguard to remove the selector. Simply unscrew the pickguard from the body, flip it over, and rest it on the top of the body. The pickguard will still be wired to the body, so you can’t go very far with it. Then, unscrew the selector. It is important that you take note of what wires are soldered to what lugs before you remove the selector. If you are not familiar with electric guitar wiring, I suggest that you draw a picture of the selector and label the soldered wires. Once you know where everything has be wired, you can cut the wires close to the lugs and remove the old selector.
I own several guitars ranging from 700 dollars to 2000 dollars so I knew not to get my expectations up when purchasing a 100 dollar. I bought this as a gift for someone to learn on but when it arrived, I could not believe the quality of guitar this is. The tuning keys are high quality, the neck and fret board are high quality. It holds its tune as good as my Ovation and Ibanez acoustics as well as my 2000 dollar PRS guitar. Very easy to press the strings. Surely I thought this would be the difference maker from my more expensive guitars but it's actually easier to play. The pickup is a little more brighter sounding than on more expensive guitars but it's nothing you can't fix with your settings.
That’s not an overstatement, as traces of T-Bone’s influence can be heard in the early recordings of Albert, B.B. and Freddie King, Muddy Waters, and especially Chuck Berry, who adopted many of Walker’s signature licks as his own. A sharp-dressed, flamboyant performer who played the guitar behind his head and did the splits without missing a note, Walker helped reposition the guitar player from the sidelines to center stage, inspiring Buddy Guy, Jimi Hendrix and Stevie Ray Vaughan to copy his impossible-to-ignore moves.
This is easily the best multi effects pedal for metal, especially if you need an easy to use option with just the essentials packed in. Within the Valeton Dapper Dark Effect Strip, you have a built-in tuner, Higain effect designed for brutal distortion sounds, a lush Chorus to bring out those riffs and add more weight to your sound as well as a Delay effect with tap tempo to allow you to add everything from slap-back delay to long, drawn out echoes. Best of all you have a Boost pedal which throws in +12 dB of gain so you can stand out from the mix when you kick in to a solo or need a certain riff to really jump out.
Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.

In 1995, an effort was made to re-introduce Rickenbacker acoustics, with factory production beginning in their Santa Ana manufacturing facility in 1996. Four models of flat top acoustic Rickenbackers were depicted in factory literature (maple or rosewood back & sides, jumbo or dreadnaught shape). Each of these four models was also available in both six- and twelve-string configurations, yielding a range of eight distinct instruments.[11] (The 760J “Jazzbo,” an archtop model, was only built as a prototype, with three examples known to exist.) It is estimated that fewer than 500 Rickenbacker acoustic guitars were built before the factory shut down the acoustic department in mid-2006.
Another point to remember about ’65 Teisco Del Rey guitars. While, in reality, Japanese Teiscos were never too particular about consistency in headstock design, they at least tended to show consistency in the catalogs. The American Teisco Del Reys were even more varied, and the ’65 Teisco Del Rey catalog shows a mix of the Bizarro square Strat head (the most predominant), the new ’64 hooked design, and the older elongated Strat design. This is probably explained by the vicissitudes of stockpiles and shipping to the new American market. In any case, it makes it a bit harder to date these instruments.

{ "thumbImageID": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "defaultDisplayName": "Ernie Ball Music Man Cutlass Rosewood Fretboard Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Heritage Tobacco Burst", "sku": "sku:site51500000015290", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst-1500000015290.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Heritage-Tobacco-Burst/J40048000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000015289", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,199.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black-1500000015289.gc", "skuImageId": "Cutlass-Rosewood-Fretboard-Electric-Bass-Guitar-Black/J40048000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
By the early 1980s, the radical experiments of early 1970s-era fusion gave way to a more radio-friendly sounds of smooth jazz. Guitarist Pat Metheny mixed the sounds of blues, country, and “world” music, along with rock and jazz, playing both a flat-top acoustic guitar and an electric guitar with a softer, more mellow tone which was sweetened with a shimmering effect known as “chorusing". During the 1980s, a neo-traditional school of jazz sought to reconnect with the past. In keeping with such an aesthetic, young guitarists of this era sought a clean and round tone, and they often played traditional hollow-body arch-top guitars without electronic effects, frequently through vacuum tube amplifiers.

Rule 4—Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.

You wouldn’t guess that this is a low-end electric acoustic, even on close inspection, because the build quality is superb. This translates to some great tone. While it might not have quite the same ring and sustain as an expensive model, only real audiophiles are likely to notice. You get a solid spruce top, good quality hardware, and Fishman electronics.
In 1883, a german immigrant named Frederic Gretsch started a small instrument manufacturing company in Brooklyn, New York. On a trip to visit home in 1895, he died unexpectedly, leaving the company in the hands of his 15-year-old son, Fred. The company flourished for generations, especially due to the popularity of their hollow body guitars with rockabilly, blues, and jazz musicians. In 1967, however, the brand began to falter after the Gretsch family sold to then music industry giant Baldwin. In 1985, Fred W. Gretsch bought the company back from Baldwin and began restoring it to its former glory – coinciding with the rise of one of their most prolific artists, Brian Setzer of the Stray Cats. Today, their guitars, like the USA Custom Shop White Falcon pictured above, are used by a wide array of musicians from all walks of life, including Billy F. Gibbons of ZZ Top, Tim Armstrong of Rancid, Band of Skulls, and Portugal. the Man.
So many new guitarists, and even not so new guitarists, play with the volume and tone knobs turned all the way up all the time and then shell out lots of money for pedals when they are not satisfied with their tone before taking advantage of what the guitar can do (and it's a lot). Then of course, your amp's tone controls can refine things even more.
The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.
One other thing to note is during the 1960's there was a lot of consolidation in the Chicago guitar manufacturers. In the 1940's National and Dobro merged to form Valco. One of Valco's sub-brand's was Supro which sold guitars under the Sears moniker Silvertone but they also manufactured guitars for Montgomery Wards as the "Airline" brand (Jack White of the White Stripes plays an Airline "Layfayette" reso-glas guitar) and there were a few other house brands too. In 1968 the conglomerate Valco closed it's doors. Also in 1968 Danelectro was shut down by MCA which had purchased it in 1966. Kay also went out of business and the remains were bought by Teisco. The only major brand that survived the 1960's to continue making these amazing guitars through the early 1970's was Harmony. We believe that's because they were the largest of all guitar manufacturers in the 1960's.
Make sure that only the notes you deliberately play actually sound. Guitar strings aren't isolated systems like the tone generators of a synthesizer; if you simply leave them open they may ring even though you've never actually played them. Always watch out carefully for such “rogue sympathetic vibrations” and make sure you properly stop strings that sound in unintended ways.

Fender guitars are the most popular and are considered as one of the best brands in the world. Fender guitar is manufactured by the Fender Musical Instruments Corporation of Scottsdale, Arizona. They are specialized in making stringed instruments and are best in making the solid body electric bass guitars. Fender Musical Instruments Corporation was incorporated in the year 1946 and is a relatively new company, but with the quality of products they make and the success they achieved, Fender is easily the best guitar manufacturer in the world.
It's the neat switching that makes this very classic-looking Tele act a little differently. All the standard Tele pickup selections - bridge, bridge and middle (in parallel) and neck - are in place, but it's a four-way switch, as opposed to the standard three-way; the additional selection provides us with both pickups in series for a bigger, louder and more humbucker-like 'secret' sound. The volume control has the S1 push switch in the top of the control knob: pushed down, the parallel and series-combined pickup selections are out-of- phase, giving three additional sounds over the standard Tele. The Baja sticks relatively close, of course, to the classic 60s Tele recipe. The rosewood 'board and alder body just seem to give that lovely smoothness to the high end that will make it less ear-wearing, especially if you're swapping over from an older-style humbucking Gibson. The standard mix is typically classic, wider than a Strat's but still nicely textured; the neck pickup here sounds a little fuller than some older readers or vintage Fender electric guitar owners will remember.
I too have a similar Alvarez made in Japan, 4 digit model no. etc. Mine is a 5059 autumn heringbone model and there is actually a production date on the tag in the sound hole of 1978. The tag is identical to yours as is the headstock logo inlay. Tuners are different however. Based on the similarities to yours I would date it around the same years, '77-'80. I know the model name due to an Alvarez advertisement clipping that depicts the model I have. I too am getting ready to do some much needed TLC to mine as it has been my most loved acoustic for 20 years now. It was a gift from my mother who used it in a country band way back when. These are great guitars that can be bought very cheaply when you can find them. Good luck with the search!
Finally, the Univox 1085 PA Amplifier System ($1,035) was another piggyback with 10 tubes, 105 watts, four channels, eight inputs, external echo or equalizer connection, four volumes plus master volume, bass, middle, treble, presence, reverb with footswitch, and a cabinet with four 15″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coils. It also had 12 high-frequency horns with crossover networks, usually used with two cabinets.
The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).
His kustom masterpieces like “Slow Burn” (a 1936 Auburn boat-tail speedster), “Skyscraper” (a 1953 Buick Skylark) and his daily driver known as “The Grinch” (a 1952 Oldsmobile) are drivable works of art that defy the bland Toyota Priuses, Lexuses and Land Rover SUVs of his Northern California environs like a stiff middle-finger salute wearing a skull ring.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.

{ "items": 1, "margin": 0, "loop":true, "dots":true, "lazyLoad":true, "autoplayHoverPause":true, "navElement": "div", "nav": false, "itemElement": "li", "stageElement": "ul" //"jqueryLazyLoad": true, //"jqueryLazyLoadOptions": { "effect": "fadeIn", "skip_invisible": false, "threshold": 300 }, //"autoplayHoverPause":true, //"responsive":{ "0":{ "items":5 }, "1158":{ "items":6 }, "1340":{ "items":7 }, "1500":{ "items":8 } } }