Kay/Valco went out of business soon afterwards, and in 1969 its assets were auctioned off. Syl Weindling and Barry Hornstein of W.M.I. (the main importer of Teisco Del Rey products) purchased the Kay brand name during this time. As a result of this, the names "Teisco" and "Kay" were used on Teisco Del Rey guitars for a while in the early 70's. In 1980 the Kay Guitar Company was purchased by Tony Blair and is currently active selling Kay brand and Santa Rosa brand guitars, Chicago Blues harmonicas and accessories and of course the Kay Vintage Reissue line of professional guitars and basses.
In the studio, a dynamic noise filter such as the Symetrix 511A, Drawmer DF320/330, Rocktron Hush or Dbx Silencer can be less obtrusive than a gate for cleaning up guitar parts to which delay/reverb has not yet been added. Very generally, such devices work by progressively reducing the audio bandwidth once the sound falls below an adjustable threshold. Transients pass through with very little change, while high frequencies are removed from the tail end of decaying sounds, which reduces the subjective hiss level. A conventional expander then mutes the signal entirely at very low levels.

Launch price: $1,427 / £999 | Body: Mahogany with maple cap | Neck: 3-piece mahogany | Scale: 24.75" | Fingerboard: Ebony | Frets: 24 | Pickups: Seymour Duncan JB humbucker, Seymour Duncan Jazz humbucker (EMG 81/60 reviewed) | Controls: 2x volume, tone, 3-way selector switch | Hardware: EverTune bridge, Grover tuners | Left-handed: Yes (without EverTune) | Finish: See Thru Black, Dark Brown Sunburst
Orange make great amplifier cabinets that work with a wide variety of heads. In fact, there are many artists out there who like to mix and match their amp+head combinations to get the specific sound out of their head combined with the classic sound of an Orange speaker cab. The Orange PPC212 Guitar Speaker Cabinet - 2x12 has been designed to bring the best out in your Orange amp head by utilising 13 ply, high density 18mm Baltic Birch plywood in a closed back construction partnered with 2 x celestion vintage 30 speakers. This Power Projection Cabinet (PPC) has been designed to last the test of time thanks to the rugged construction.
Tuner: If you’re new to guitars and playing music, there is absolutely NO way that you know how to recognize all the notes by ear and tune your guitar without a tuner. Even if someone tunes the guitar for you at the shop, it will get out of tune by the time you’re home, so this one’s an absolute must have. Hang on for the price until we discuss the next device.
The EC-1000ET is an all-mahogany single-cut loaded with an set of EMG 81 and 60 active humbuckers, a comfortably modern neck and a high level of construction quality. Its key selling point, however, is a fitted EverTune bridge -  unlike other tuning systems, it doesn't tune your guitar for you or offer altered tunings. Instead, once set and tuned, it simply aims to stay there, thanks to a series of tension-calibrated springs and levers. We tried everything we could to knock it out of whack: huge, three-step bends, wildly exaggerated string stretching... we even put the guitar into a freezer. It came back perfectly in tune every single time.  What's more, a guitar that's perfectly tuned and intonated up and down the neck seems to play much more musically. We're not aware of any tone compromises, either. The EC sounds as full and aggressive as ever, with the more mellow tones of the neck EMG being pleasantly rounded, and all bereft of any metallic spring clank. If never going out of tune is important to you, this is one of the best electric guitars going.

A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
At the onset, we decided to stick to DIY electric guitar kits that can be bought from online retailers in the mainland US, to ensure that the ones we list are accessible. We then took note of popular and highly rated kits, which for this updated required us to gather around 700 relevant user and expert reviews and ratings. All these data are then fed into the Gearank algorithm, which gave us the scores that allowed us to narrow down the list to just the top 6 kits. For more information about this process see How Gearank Works.
The 1960s were the Golden Age for guitars in America. The folk music boom was followed closely by the British Invasion and the demand for guitars skyrocketed as young people by the millions started making their own music. The Silvertone Amp-In-Case model 1457 was the entry point for thousands of them. Some of the most sought-after Silvertones are from this era … more
I Have a '70 lyle hummingbird and its a solid spruce top and mohagony neck back and sides. My guitar luthier fully inspected it. Mine is in near mint condition and sounds identical to the '64 Gibson Hummingbird my luthier has. He was trully freaked out by this.. ha ha He keeps trying to buy it from me but im affraid im hanging on to mine. It seems there is alot of contradictory information on these guitars. It is super hard to get more than a small paragraph of info on these things. One site out there has several catalogs from lyle guitars but they require a payment or paid membership to view them. If you are interested google lyle guitar catalogs. There is one that sold for 600.00 at joes vintage guitars.com Its Identical to mine. If I find any more info Ill post as discovered.
My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!

Boss is well known for producing reliable and good sounding guitar effects, many of which continue to serve popular guitarists like Eric Johnson, Steve Vai, Marty Friedman and many more. Being a big player in one market doesn't always translate to success in another, but Boss' recent foray into the guitar amplifier market is proving to be quite successful, as evidenced by the consistently favorable ratings that most of their amplifiers are getting. To be specific, we are talking about the Boss Katana range of amplifiers, which combine Roland's (Boss' parent company) experience in amp building with Boss reputation for quality and reliability.
Super info. thks. Just found your site as I too, had some questions about action. I have a Martin D-28, manufacture date late 2013 and I purchased new in Feb. of 2015. It has always been humidified and kept in the case. I only really noticed the ‘high’ action when I changed to drop D tuning and I noticed amplified ‘string whip’. I estimate the height to be 4mm. I re-tuned and looked again and the action is noticeably higher than my Epiphone EJ 200 and Simon & Patrick Woodland Folk. I think, as you have said, the guitar is just getting acclimatized to it’s ‘new’ home. Play ability is still good, (although the player needs work!) but I think I will take it back to Folkways Music to have the Tech take a look. Thks. Great site, I will bookmark it!

Just start out small, when i first started playing guitar I wanted to learn every metallica song there is, and sure enough I did, it took me about 5 years to get there and a bunch of different gauges eventually with time you start to develop the feel for what gauge satisfies you the best. Now I mostly use hybrids ranging from 10-13's, but just like everyone I started out with softest strings that are out there in existence but I used to break them alot so there were many beers out there that I didn't get to drink because the will to play guitar was stronger hahaha. But in the end it was worth it cause now I get to have all the fun on the guitar, and all the chicks are digging it hahaha, no they're not. And one more thing never obey the rules it's just something that stuck up guitarist make up because they don't want to be outdone find out what pleases you the most and keep on doin that.

Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
You might recognise this in the tone knob above. The only difference is that R11 is a variable resitance from 0 to 250 Kohm, and C4 is a fixed value. Several guitars have several combinations of R11 and and C4 to achieve different cut-off points. When R11 is 100% position, the resistance is maximised, so there is little incentive for eelctrical current to flow to C4. The signal is not affected as much.
Martin’s re-entry into electric manufacturing is related to the association of Richard (Dick) Boak with the C.F. Martin company. Dick Boak, with dreams of being a luthier and constantly working on guitar projects on his own, joined Martin in 1976 as a draftsman. In 1977 Boak was assigned to the project of designing an electric guitar for Martin. This resulted in the development of the E-18, EM-18 and EB-18 guitars and bass. The first prototypes of this new electric guitar series were produced in 1978, ten years after the demise of the GT-70/75, and production commenced in 1979 with guitar serial number 1000.
Sometimes a guitar needs more than a setup, and actual repairs are required. Guitar setup price is minimal when compared to the price of most repairs, so be sure that the problem is not something that can be easily adjusted before making any patch-ups. The cost of repairs can be virtually any price depending on the damage. Refinishing might be over $100, and if a neck needs replacement due to warping, then the price may be several hundreds of dollars. A cracked neck can be glued and clamped for under $100, but the quality of the guitar is unlikely to be regained with this process.

If your instrument receives regular maintenance, then you are likely to avoid any unneeded guitar setup cost. A properly cared for guitar will be regularly cleaned, oiled, and treated gently at all times. Of course, this is not possible for all people, as their preferred style of music may negate the ability to treat a guitar gently (metal and punk are good examples). Having the guitar setup can be thought of as maintenance in itself, as it is an invariable need in environments that have inconsistent weather patterns (which would be virtually all of them). The cost of a guitar setup can be insignificant if you maintain it on a regular basis.


I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
T5 (2005) – Abbreviation stands for Thinline 5-way. “5-way” refers to the five position pickup selector switch mounted on the top of the guitar which activates different combinations of components in the T5’s pickup system. When hooked up to an amplification system, it’s capable of producing a variety of acoustic and electric tones in a single guitar.
A volume pedal is ideal for those guitarists out there who like to use volume swells or fade-ins, and those who don’t want to have to use the volume pot on their guitar to do so! All you do is apply pressure on the front or back of the pedal to get the desired effect and you’re good to go! They’re super simple to use and only change the signal rather than the tone of your guitar or bass.
To create a fairly live, in-your-face sound, a short reverb or ambience program with a fairly bright character is ideal. A hint of slapback echo or a little pre-delay before the first reflection can enhance the sense of power and intimacy, as when a guitar is played in a small club. More generous reverb can be combined with repeat echo effects to create a lush, spacious sound, but you need to leave space in the instrumentation and arrangements for these sounds to work, otherwise they just sound confused and messy. Feeding the effects send through a chorus or flanger before the reverb gives a nicely complex twist to the sound without being too obvious.
Marshall are king when it comes to stacks and rock where fender leads with combos. Marshall offer a wall of sound with punchy lows, strong mids and aggressive highs. But it's not all shrill highs,dial back the trebble a little and you can also get really nice cleans and some real grunt as the crunch sets in. The classic Marshall sound is so coveted that there the market is saturated with imitators. - Antmax
This is essentially the distance measured between the saddle and the nut, or more accurately described as double the distance from the nut to the 12th fret plus some "compensation" added by the position of the saddle. A longer scale length requires higher tension in the strings and results in a brighter tone. A more detailed explanation with examples is presented quite well by Stewart MacDonald and a good description of the implications of different scale lengths can be found on Guitar Player. Guitars based on Stratocaster and Telecaster designs usually have a longer 25.5" scale while Les Paul and SG style guitars are characterized by a shorter 24.75".

You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
The name has a long and involved history that is interwoven with that of the resonator guitar. Originally coined by the Dopyera brothers when they formed the Dobro Manufacturing Company, in time it came to commonly mean a resonator guitar, or specifically one with a single inverted resonator. This particular design was introduced by the Dopyeras’ new company, in competition to the already patented Tricone and biscuit designs owned and produced by the National String Instrument Corporation.
Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. This type of guitar was manufactured beginning in 1931 by Electro String Instrument Corporation under the direction of Adolph Rickenbacher and George Beauchamp. Their first design was built by Harry Watson, a craftsman who worked for Electro String. This new guitar which the company called "Rickenbackers" was the first of its kind.
There was a band in Manchester called Sister Ray, who were just this scary bunch of men/reprobates. I guess word had got around that I had a knack and was a useful little guy to have around, and you only have to buy me some Coca-Cola and I was good to go. So I played with them. I started playing my first sort of shows in front of real [crowds] when I was fourteen.
It might be a little overwhelming when you listen to the song being played by the professionals. Try not to listen to all the extra filler that these musicians put into their music and focus instead on the chord progression. Think about the chords that go into making these songs, try to memorize them, and listen to when the chord changes happen in the song.
Electric guitar pickups provide a great way to customize your sound. They offer you the option of creating more sustain and enjoying stronger harmonics, and depending on the music genre or venue, pickups can make your tone warm or bright and allow you to add more or less distortion. Where you place you electric guitar pickup has an impact on the desired sound you want to achieve. If you're looking to create a bright or trebly timbre, place the pickup at the bridge. Neck pickups provide a warmer sound with a little more bass while multiple pickups together in one area help to produce additional vibrations. There are a variety of electric guitar pickups to choose from that can help you amplify your rockin' riffs or scorching solos.
Get a ruler (or straightedge if you want to be all fancy) that is at least as long as the neck, but not so long that it reaches all the way from the nut to the saddles (and watch it doesn’t lean on the pickups or pickup surrounds either). If you can’t get one between these lengths, and are willing to sacrifice a ruler, get one that’s too long and cut it to length. Alternatively, you can just cut a little out of one edge so that you can still make full use of the other edge of the ruler. Now lay the edge of the ruler along the frets (don’t rest it on top of the nut, saddles, pickups or pickup surrounds).
The MESA Bigblock 750 has a built-in overdrive channel. The Mesa M2000 has a high gain switch which can be engaged with a footswitch. The Marshall MB450 head and combo bass amplifiers have a tube pre-amp on the "Classic" channel which can be overdriven. The Ashdown ABM 500 EVO III 575W Bass amp head has a built-in overdrive effect. Overdrive is also available on many Crate bass amplifiers. The Yamaha BBT500H has three types of built-in drive effects: overdrive, distortion and fuzz. The Ampeg B5R Bass Amplifier has two channels: clean and overdrive, with the ability to combine the two. Verellen, a boutique amp company, produces a bass amplifier with a built in overdrive channel.
The entry point for guitar pedal self-assembly is the effects pedal kit. A lot of the work such as designing and manufacturing the circuit board, drilling the enclosure, and selecting suitable parts has already been done for you. With a little care and careful following of the instructions, there’s no reason not to have a first time success with a pedal kit.
Solder the electronics. The pickups you purchased should come with a schematic that shows exactly how to connect these to the controls and to the input for the guitar cord. Follow this schematic, using an ordinary electronics soldering iron to complete the job. Wrap any wiring connections with electrical tape, unless the manufacturer’s instructions suggest another method.

My first electric was a Decca, and a friend had one too. Mine was the one pickup style and his had two pickups. This was back in 1972. These were cheap but played very well and I wish I still had mine. There's one on Ebay right now that's just like the one I had, only ten bucks so far. I remember the great sustain and feedback I could get through it playing Hendrix songs!
Guitar technicians need a high school diploma or equivalent, though some community colleges offer programs in guitar technology. Apprenticeships or on-the-job training may also be available. These professionals should have hearing acuity for tone and pitch and the ability to play guitar. They should know how to use electronic tuning devices, as well as hand and power tools. Guitar technicians should also be skilled at woodworking. According to 2015 data from the U.S. Bureau of Labor Statistics, musical instrument repairs earn a median salary of $35,660.
Despite the fact that there are many great beginner guitars out there, Ibanez holds the title of owning starters designed specifically for metal. The way they have achieved this reputation is quite ingenious. They have delivered the same body style shared with their higher-end models. Ibanez GRX20ZBKN is a good example. It is a basicguitar that packs a mean punch.

Understanding how to read electronics schematics is the key to being a successful DIY pedal builder. A schematic will show you what components are needed for the build, as well as how these parts are hooked together to create (in this case) an effect pedal circuit. At first glance, a schematic may look like a bunch of hieroglyphics, compiled of various symbols, numbers, and letters (see below). Don’t fret! – After a bit of practice, you should develop a basic understanding of how a schematic works, and you will be putting together DIY effect pedals in no time!
Description: Body: Mahogany - Body Size: Baritone - Neck Attachment: Bolt - Neck Wood: Canadian Hard Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Custom - # of Strings: 7 - Headstock: 4+3 - Bridge: Tone Pros - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG HX-7 - Pickup Configuration: H-H - String Instrument Finish: Black
This is an interesting one - by fitting a MIDI pickup to your guitar you can record your performances as a MIDI track as well as live audio. This can then be assigned to any software or hardware MIDI-triggered instrument to double up or even replace the guitar part. Some DAWs now also allow the extraction of audio to MIDI data from a recorded audio part, but the MIDI pickup route is more accurate where electric guitar is concerned.
There were at least three different versions of this guitar with differing knobs, fingerboards, control plates, cord mounting, and trim. One even had a nice rosewood fingerboard with dots. This version was the most monochromatic of the bunch, I suppose. It cleaned up really nicely for these pictures. Okay, so it's an ugly little spud. My wife describes this guitar as "so ugly it's cute," and she fell in love with it in the store for that reason. I like that.

If a guitar is going to be our other half it has got to be comfortable to play. Does that fit in on this one? It sure does! It would be easy to assume that if they have spent so much time making it look good they probably didn’t have time to make it ergonomic, but that’s exactly what they’ve done! The guitar has a deep belly cut, a hidden forearm contour and a neck joint that makes it easy to play high up on the fretboard.
Yamaha is famous Japanese Company known for producing an extensive range of musical instruments. It has caught the attention of the beginners and intermediate guitar players due to its budget-friendly product prices. Thus, it is the excellent choice for those who are going to have a first experience of buying any guitar. They can indeed get a good deal without costing a fortune. It is also suitable for Acoustic players. Yamaha continuously produces high-quality instruments that are unconquerable when it comes to the material or even sound quality.

Setting up a mic to record the natural acoustic sound of the guitar strings can add percussive character when blended with the amp sound, especially if you are capturing old-school archtop sounds. For best results, the guitar needs to be isolated from the amp to prevent excessive bleed. This technique gives a good front-end attack to the sound and plenty of definition. A small condenser is the best mic for the job, and it’s worth using a high-pass filter as well.
Of all the guitars in the world, this ends up as number 42!?! OK, amateurs, time to tell the truth, these guitars are the best, simply flawless and amazing. Don't talk about your Yamahas or your Ibanez or even Fender for that case! Those are just decent guitars. You will fall in love with the John Petrucci models; they have clobbered, I mean nearly humiliated Gibson. Try these, then think again.

Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.
You have tonnes of distortion models based on the likes of the classic DS-1 (Dist-1) and Pro Co Rat (Squeak) pedals and more as well as boost, delay and modulation effects. An onboard tuner, stereo/mono looper with up to 80- seconds of phrase recording, tap tempo, stereo headphone output for silent practice and the ability to use up to 7 effects simultaneously.

The three pickups were originally identical in their construction. With the rising popularity of using pickups in combination, Fender introduced a new feature in 1977 coinciding with the standard 5-position switch; a reverse-wound, reverse-polarity middle pickup. As the description implies, the magnetic polarity of this pickup is opposite the other two, as is the direction of the wire winding around the bobbin. This provides a hum-canceling effect (removing hum induced by poorly shielded, medium to high output AC devices) in positions 2 and 4 on the selector switch. This principle had been known for many years beforehand, being applied in the form of Gibson’s humbucking pickup and Fender’s own split-coil pickup used on the Precision Bass.


Shecter is known for manufacturing quality rock and metal friendly guitars at reasonable price points, and I think that they use evil model names to keep their instruments from the hands of pop and ballad players. The Hellraiser C-1 FR-S showcases what this company can give metal players in the mid-tier price point, and with its name, it is obviously not meant for choirs and church music.
There are two main types of controls on bass amps: switches and rotary knobs. The simplest, least expensive practice amps and combo amps may only have a few switches and knobs, such as an "on/off" switch, a volume knob, and a bass and treble control knob. Mid-priced models may add additional tone controls (e.g., one, two or three "midrange" controls and a "presence" knob for very high frequencies) and/or add a second type of volume knob called a "gain", "preamplifier" (or "preamp"/"pre"), or "drive" (short for "overdrive") control. A good selection of equalizer knobs and gain stages is standard on expensive amplifiers. If an amp has one or more preamp or gain knobs, the second volume knob may be called "master", "volume" or "post".
Frets & Necks did an AMAZING job on my RG7421. They installed my BKP Black Hawk p/u's and new tone/volume pots. Frets & Necks service was above and beyond, fast and super knowledgeable. I am very pick...y about who works on my guitars, I am beyond pleased that I chose Frets& Necks to work on my RG. I will be bringing my RG7421 back to Frets & Necks for future upgrades very soon. Be good to yourself and treat your guitar, give Frets & Necks a try. You won't be disappointed. Thank you F&N. See More

{"pageName":"[gc] pdp: palmer palmer electric solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113503875;;;;evar65=null-Guitars-Palmer","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
The lowest note on the double bass or four-stringed electric bass is E1, two octaves below middle C (approximately 41 Hz), and on a five-string it is B0 (approximately 31 Hz).[22] The requirement to reproduce low frequencies at high sound pressure levels means that most loudspeakers used for bass guitar amplification are designed around large diameter, heavy-duty drivers, with 10", 12" and 15" being most common. Less commonly, larger speakers (e.g., 18") or smaller speakers (e.g., the 8x8" cabinet, which contains eight 8" speakers) may be used. As a general rule, when smaller speakers are used, two or more of them are installed in a cabinet (e.g., 2x10", 4x10" and 8x8"). For 12" speakers, combo amps and cabinets are available with 1x12" and 2x12"; less commonly, 4x12" cabinets are seen. For 15" speakers, combo amps and cabinets usually have 1x15", although 2x15" and even 4x15" cabinets exist (Lemmy Kilmeister of Motorhead used 4x15" cabinets). A small number of 1x18" bass cabinets are sold (e.g., Trace Elliot).
Roger McGuinn worked with C. F. Martin & Company to develop a seven-string folk guitar. McGuinn’s guitar (the D7) is tuned the same as a standard folk guitar with steel strings, but the third (G) string is augmented with a harmonic string one octave higher. The intention was to offer the six-string player the chance to play “jangly” twelve-string style lead guitar.

Straight away meeting the essential criteria and tonal platform for a good small solid state combo amp for practicing at low volumes with a pocket friendly price tag is Orange Crush 20RT. This dual channel 20 watt guitar amplifier that also comes in a 35 watt version is the upgraded model of the well received Orange Crush 20 for having a built-in spring reverb effect and a chromatic tuner which are the kind of features great for daily use.

The Kay Gold Line professional series became synonymous with that rich gutsy Blues/Jazz sound that eventually became rock. This unique blues sound was not available from any other guitar of that time. For the past decade vintage Kay instruments have been fetching high prices and have had increasing interest from collectors and players because of the cool, campy look and that unique Blues/Jazz sound.
An amplifier stack consists of an amplifier head atop a speaker cabinet—a head on top of one cabinet is commonly called a half stack, a head atop two cabinets a full stack. The cabinet that the head sits on often has an angled top in front, while the lower cabinet of a full stack has a straight front. The first version of the Marshall stack was an amp head on an 8×12 cabinet, meaning a single speaker cabinet containing eight 12" guitar speakers. After six of these cabinets were made, the cabinet arrangement was changed to an amp head on two 4×12 (four 12" speakers) cabinets to make the cabinets more transportable. Some touring metal and rock bands have used a large array of guitar speaker cabinets for their impressive appearance. Some of these arrangements include only the fronts of speaker cabinets mounted on a large frame.[25]
Processed Pitch Shifts: Few pitch-shifting algorithms are transparent enough to allow you to transpose anything by more than a couple of semitones without obvious side-effects. If what you're processing is going through an amp modeller, however, you can get away with much more radical changes. You can even do effective swoops and dives in pitch by progressively increasing the amount of pitch-shifting you apply to a note, and pitch changes of an octave or more can sound good, although they probably won't sound natural at these extremes. Sam Inglis
These guitars work in a similar way to solid-body electric guitars except that, because the hollow body also vibrates, the pickups convert a combination of string and body vibration into an electrical signal. Semi-hollowbodies are noted for being able to provide a sweet, plaintive or funky tone. They are used in many genres, including blues, funk, ’60s pop and indie rock. They generally have cello-style F-shaped sound holes, though these can be blocked off to prevent feedback, as in B.B. King's famous Lucille.
×