Vintage styling, high quality speakers and that classic Fender cabinet warmth - there's a lot to love about the Fender Bassbreaker 212 Guitar Cab. Perfectly matched with the Fender Bassbreaker 15 & Fender Bassbreaker 45 guitar amp heads. There's 2 x 12 inch, 8 Ohm Celestion V-Type speakers inside and the semi-closed back ensure those rich, low end frequencies are captured. A great addition that can act as an extension cabinet to the Fender Bassbreaker 45 combo/head and the Bassbreaker 18/30 combo. if you want to add that signature fender warmth to your sound, this head is a perfect match to your own amplifier head with a total impedance of 16 Ohms.

This is where the roads came back together. Kaman continued to play guitar during his building of the helicopter business. He kept his guitars hanging on the wall, instead of in the case, so he could grab one if he felt like playing. As a result he ended up with lots of cracked backs, including one on a favorite Martin. Charles traveled down to Nazareth to get the guitar repaired and Fred Martin gave him a factory tour.
{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series.
Here’s one more metal marauder that is worth mentioning. Schecter Hellraiser C-1 comes packing a lot of output and a tone that handles all kinds of distortions naturally. We are talking mahogany body combined with a set of EMG 81/89s, which should be enough to spark your imagination. Plugged into a Messa/Boogie Dual Recto’s red channel, this puppy simple felt at home
The headstock is located on the end of the neck opposite the guitar body. It is fitted with tuning keys, also known as tuners, tuning pegs, or machine heads. These adjust the tension of each string, changing their pitches. The nut is a small strip located where the headstock meets the neck, that is grooved to guide the strings onto the fretboard. On an acoustic guitar, the nut is commonly made of plastic, but it can also be bone, graphite, or any number of other materials.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
You should have been making all the above adjustments with the preferred gauge of strings, but since you have probably loosened and tightened the strings a number of times over the course of this process, you should now put on a fresh set and do a final check of all the settings Neck adjustments in particular can tend to settle in over the a couple hours after they have been done, so I find it best to then let the guitar sit overnight and do a final check the next day. The bottom line in ending up with a quality set-up is making each of the important adjustments in the correct order: Neck- then Nut- then Bridge saddles.
 You will not grow here or learn anything that will be useful in any other company unless they employ 1950's management techniques. Maybe a screenwriter for "Madmen" would find some material here but as someone trying to grow their career you won't learn anything useful. The pay will be no better than your last job minus your previous bonus and 401k match which to my knowledge they do not contribute. So next question, your not making any more money and probably less, not learning anything useful and will need to explain why you left after 6 months, how are you going to position this to beat the competition going after your next job?
The full-size guitar in black by DirectlyCheap should therefore be on your list for consideration. Made out of linden, basswood and catalpa with a particularly ornate inlay around the sound hole, this model has a really lovely sound for the price. Just keep in mind that, like other guitar shipments, when you receive the guitar, you will have to “set up” the neck. If you need help with this, a guitar tech will assist.

The characteristics of your Kingston are very similar to what other owners have reported: occasional scratchy and erratic performance of the electronics, intonation problems, and action that is hard to control (notably due to the lack of a truss rod). Although I can’t verify this, one estimate indicates that over 150,000 Kingston guitars were sold in the U.S. during the 1960s! It’s obvious that quantity trumped quality when it came to producing the guitars, and it isn’t surprising that the electronics have some issues after all these years.

NOTE: In these diagrams, the volume and tone controls are viewed from the rear. The volume and tone controls are variable resistors, also known as potentiometers (or "pots" for short). In electric guitars, the values for either of these usually is about 250K to 1 megohm. The capacitor in the circuit is for the tone control and these values usually are from .02 to .047 mfd (short for microfarad).
I consider Squier and Epiphone to be the two top brands beginners should be looking at for their first guitar. However, there are some key differences when it comes to their flagship instrumets. Where the Epiphones listed above have a pair of humbucking pickups, the Squier Stratocaster has a trio of single coils, and the Telecaster a pair of single coils.
Single coil pickups are the simplest to wire because they typically have only two leads – hot and ground. Some humbuckers have their coils connected internally and are pretty much the same to wire as single coil pickups. That’s why we will call them both “two conductor pickups”. Ground leads are typically connected to a common grounding point and hot leads are switched in and out of the circuit. Let’s take a look at standard Strat-style switch.
ESP Guitars are among the very best guitar brands on the planet. The firm was set up by Hisatake Shibuya in the year 1975 in Tokyo, Japan. They developed lots of reputation as providers of the most effective quality replacement parts for musicals. After 1976, Shibuya began developing his own guitars and since then the ESP guitars are known for great service and its quality. The ESP LTD EC Series EC-10 is a popular Electric Guitar of the company.
Consideration of this takes us back again to Kink Dave Davies: “The blues players were the first to crank it up, and the music had that spirit, that anguish. We used to listen to all those guys. Like John Lee Hooker—he had that buzz, that drive. I used to listen to him and think, ‘What’s he doing there? That’s amazing—how do you get that sound?’ I think all those elements led to me messing around with amplifiers, because all the amplifiers were clean, soulless.”
I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
Funny, the Dorado was manufactured in Japan during the 70's and the Japanese factory worker must have arbitrarily placed a model number when he or she felt like it. However, it seems that Serial Numbers (presumably in proper sequence) were always assigned and hand written with a black ink pen. My example, while space is present, is void of any model number.

Strongly influenced by Stevie Ray Vaughn, Albert King, and Johnny Winter, Garrett is also a longtime fan of Lynyrd Skynyrd’s Allen Collins. Following the path that led Collins to his biting, cutting tone, Bo plays the same type of guitar as the Skynyrd legend, and gets tremendous versatility from his Gibson Firebirds. Incidentally, Winters and King are also notorious Firebird pickers. Bo says that his Firebirds (one of which is a rare collectible) allow him to go from nasty drive flavors to cleaner, Strat-like tones when he needs them.

I bought a Palmer acoustic-electric about 10 years ago, for 185.00, used, it's white, with black trim, and still plays very well. I also can't find out where it's made, the neck is still straight, and the tone is good. It says hand crafted inside, and model p-38-12 and a letter I don't recognise, or is a misprint. the pick-ups are near the last frets, small screws, almost hidden. The neck is kinda wide, but you get used to it. Thats all for now, I'll bet all their guitars are pretty good.
Play a classic 6120 or Duo Jet and it can seem a bit, well, old-fashioned. A growing number of players desire the brand’s looks, sound and unmatched vibe, but also want something a tad more versatile and user-friendly. Enter this latest Players Edition model with its neck set lower into the body for improved access, higher-output Filter’Tron-style humbucking pickup (Full’Trons) and a modernised Bigsby vibrato where through-stringing replaces the notorious ‘hooking the ball-end over a peg’ system that scuppered any chance of a quick change. Mate these modern tweaks with another recent innovation (for Gretsch, at any rate), the Centre Block range, and you have a guitar ready to compete with anything out there - in virtually any style.
The strings fitted to the guitar also have an influence on tone. Rock musicians often[when?] prefer the lightest gauge of roundwound string, which is easier to bend, while jazz musicians go for heavier, flatwound strings, which have a rich, dark sound. Steel, nickel, and cobalt are common string materials, and each gives a slightly different tone color.
accessories aeolian mode analog basic chords basic guitar chords beginner best guitar brands cheap guitars chord diagrams digital dorian mode easy guitar songs effects guitar guitar amp photos guitar buying guitar effects guitar equipment guitar kits introduction ionian mode lessons locrian mode lydian mode major key major scale mixolydian mode music studio natural minor scale noise control pedalboard pentatonic major pentatonic minor phrygian mode pickups practice room recording scale diagrams soundproofing theory used guitars
The Gibson 2017 has a truly amazing setup and it played nicer and felt better than most models in its class. The tone is deep and throaty, and ab0ve all, it’s 100% Les Paul. What actually made the big difference in this electric guitar is the upgraded electronics and wirings with very minimal feedback and sustain. There is no buzzing or excessive string vibration. All that you get is a superb, perfect fit and finish.

One reviewer mentioned that anyone wanting to purchase the C40 will need to change the strings to get the best sound out of this model. Another reviewer uses the C40 as their main guitar for composing, and it works quite well for the job. So, overall, if you feel the need to be cost-conscious at this point in time, but want a quality instrument, the C40 should be on your list of models for proper comparison shopping.
Beginners, take note! We’ve changed a few things in this article of beginner-friendly electric guitars, which included removing a few older models such as Squier’s Vintage Modified ’51 and the ESP LTD M100FM. We then added some new and popular models, such as the stripped-down Squier Affinity Jazzmaster HH, the super-cool Dean Vendetta XM, and the compact Jackson JS1X Dinky Minion. Also expanded the guide part of this article.
Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.
Being a PODHD user for many years now, I am but one of the many who commend its balance of versatility and sound quality. Like many reviewers, it allows me to gig and record conveniently, often times plugging straight to PA with great results. I've also seen a number of professionals using PODHD500X's in their concerts, so it's not surprising that even experts at Music Radar were convinced, saying: "The modelling is excellent throughout, with authentic-sounding amps and quality effects".

This page is a work in progress and as new information is revealed it will be added to the list. But I can't do this alone, folks. See a guitar not listed? Tell me! Listed below are the major manufacturers, known badges and suspected badges to the best of my knowledge in written and list form to make it easy to find out WHO MADE YOUR GUITAR! In some cases I won't know because the badge you have may be extremely rare and virtually unknown to even seasoned collectors.

Raising the speaker cabinet off the ground varies the path length of reflected sound reaching the microphone, which can usefully alter the sound in some cases.One way to capture the sound of a large stack, unsurprisingly, is to set up the stack in a large room, play loud and put the mic several feet away so that the combination of all the speakers can be recorded, along with any floor reflections and the subtle filtering effects these may cause. Using this method, the mic 'hears' the guitar sound much as an audience would. Nevertheless, the most common approach is to close-mike the amp with the mic set up very close to the speaker grille and pointed directly at the centre of the speaker cone — where the cabinet has multiple speakers, it's traditional to deliberate over which one sounds best and then mic that one!). Moving the mic to one side produces a less toppy sound, so before reaching for the EQ knob you should try moving the mic.
Here's a cool tip: If you ever needed to compare sizes between two items, say tuner shafts and a drill bit, but don't have a micrometer, try this. Use a crescent wrench! adjust the jaws to fit the first item, and then see how the other piece fits! Also great for taking measurements of something round. Fit the wrench to the object, and then lay the tool on a ruler and measure the gap. It's much more accurate!
“Rock guitarists are incredibly conservative and traditional,” says Dr. Millard. “We like to think of ourselves breaking all the bonds and we go back to the fifties when rock and roll was revolutionary. It is not revolutionary. It is very traditional, very conservative, and musicians are really stubborn to change. We have a cultural understanding that old is better than good.”
This vintage Teisco Del Rey Japanese guitar was made in the 1960s and has a classic sunburst finish and tulip shaped body. Manufactured in Japan by the Tokyo Electric Instrument and Sound Company (yeah, you got it…TEISCo!), the Del Rey measures 37 3/8 inches x 11 1/4 inches at widest and longest points. The fretboard measures 18 3/8 inches in length from the nut to end. My dad bought this one from some guy at his work, who later supplied him with the original whammy bar and headstock hardware which he found later! The relatively small body size of the Teisco Del Rey was appealing to my wife, who was on the lookout for a smaller-sized guitar she could play. My dad replaced the original tuning pegs with much nicer chrome ones from a 1980’s Gibson SG and we took it home. However, she realized that she didn’t care much for electric guitar, so we decided to clean it up and sell it. Everything was in excellent shape, but it did have some electrical issues. The volume/tone pots were filthy and you could hear a wall of white noise as you turned the knobs. At the time, I didn’t know the marvels of Deoxit and contact cleaners, so I didn’t know how easy it would have been to clear that problem up. One of the pickups or pickup selectors also didn't seem to be working. It played OK without noise or distortion when the volume and tone knobs were set to 10 and the pickup selectors set to "black up, white down", but the sound could still fade in and out sometimes if you bumped the buttons or switches the wrong way. Again, simple issues that I could have cleared up with a soldering iron and contact cleaner. In any case, we meticulously cleaned it and put it up for auction. Despite the minor problems, a bidding war ensued and now this Teisco Del Rey Japanese guitar lives in Australia! Overall, the Teisco is a good playing trashy guitar with loads of funky style. Scroll down for more Japanese Guitars from our collection!
This guitar has an interesting makeup of tone wood. First, the body is Mahogany just like the Iron Label model. The top of the guitar is Poplar Burl, where a burl is actually a type of growth on a tree in which the grain has become somewhat deformed. It sounds bizarre but, Burl is highly prized for its rarity and beauty and is often sought after by wood sculptors and luthiers alike.
A notable line produced by Ibanez is the Artwood series, which has combined old world craftsmanship with modern manufacturing to create some pretty solid entry-level guitars; a great example of which is the AW54CEOPN. While the Ibanez AW54CEOPN is an acoustic-electric guitar, the main focus of its design was its acoustic tone. The guitar utilizes an open pore finish, which is intended to allow the guitar to resonate more freely by minimizing the amount of finish applied to it. It’s hard to say how effective this is in practice due to the guitar’s laminated back in sides, though there doesn’t seem to be any widespread complaints about the guitar’s tone.

Unlike the guitars we have mentioned so far, the Taylor BT2 Baby Taylor is a travel guitar. In other words, it's a 3/4 scale size of a standard dreadnought, making it easier to play for a lot of us. The top wood is a solid mahogany piece while the back and sides are made of layered Sapele. The use of laminate wood is one of those friction points which many purists like to point out to. However, the way Taylor builds these guitars, you really won't hear a difference. In this case it's only a visual difference, and a fairly attractive one at that.
And how does adding a pedal, basically one more optional pre-amplification stage that you can turn on or off at your leisure, make somebody less “real”? Imagine some old-school guy is just using guitar to a (insert amp brand)? Great! I love them too. Which one? Ah, nice amp! Did they know that amp has one more gain stage than that amp over there? If I plug into that one while they play theirs, did I make them less real or genuine, or did I become SUPER-real? Are they going to start fading like Marty McFly when the outcome is in doubt at the end of Back To The Future? Will they spring back to life and start playing “Earth Angel” properly once I unplug?
The construction allows the soundwaves to resonate freely within the body’s hollow airspace as well as around the violin-style F-holes and throughout the solid glue joints. Everything – from the body wood and construction to the neck wood and pitch – contributes to the tone of the 2019 Gibson ES-335 Figured guitar. This model boasts impressive depth and sustain in addition to an exceptional resonance that you can feel through the guitar’s body.
Melodyne is a software application for OS X or Windows with which you can edit audio in a more musical way than was ever thought possible. In Melodyne, you work with notes – and not with a meaningless wave form. You don’t just see where the music gets louder or quieter but also where notes begin and end and at what pitch they lie. You can modify each note and thereby influence direc...
What you need is some basic knowledge about the physics of audio (most of which you can learn by dropping a pebble in a puddle of water), and some pretty basic and inexpensive equipment. This is especially true for recording the electric guitar. Trust me--if it were brain surgery, I would have become a brain surgeon and made my mother a much happier woman. And while I have the opportunity . . . for all you kids who want to grow up to be recording engineers--don't do it. Become brain surgeons. They make a lot more money, drive nicer cars, and never have to worry about where their next gig is coming from.
R.E.M.'s guitarist was a less-is-more master who never needed much more than swarming melodies and spangled riffs. From the laser-guided arpeggios on "Radio Free Europe" to the supersize power chords of "The One I Love," his sound was both gorgeous and matter-of-factly aggressive – a DIY style that helped Eighties underground rockers push beyond punk rock. "They created 50,000 guitar bands after them," noted Billy Corgan, "America was inundated with jangly R.E.M. type bands."
Read Full Review The brand ESP that we all know today started its roots as a shop in Tokyo Japan selling custom replacement parts for guitars that quickly gained a good reputation for its high quality. Soon came after the brand manufactured fully assembled guitars that burst in the trash metal seen of the 80’s signing in big name bands to carry their guitars and basses.
If you have a little bit more to spend than what you pay for the Epiphone LP Special II you might want to consider the Epiphone Les Paul 100. It has a mahogany body with a maple top, mahogany neck and rosewood fingerboard. It’s got solid tuners and hardware, a 3-way switch and two tone and volume knobs. It’s slimmer and therefore much lighter than the Gibson Les Paul. The Epiphone LP 100 feels and plays good. It’s a reliable and durable guitar. A great choice for rock and blues!
The most common overdrive will also alter the tone of the input signal by adding in a muli-processing chip within the circuitry. Such as the classic Ibanez TS-808, made in the 1980's, having the MP-D01201A multi-processing chip. Depending on the brand of the overdrive, the installed multi-processing chip and the preferences of the player, this type of overdrive is typically a go-to overdrive and is commonly the cheapest to purchase.
Speaking of session guys, we have Joe Messina, but where are his partners Robert White and Eddie Willis? Or Dennis Coffey? There’s a whole slew of great musicians whose names get forgotten but whose playing we all instantly recognise – alongside the Funk Brothers, there are the likes of Buddy Emmons and Grady Martin from the A Team, and then there’s the Wrecking Crew and the whole LA scene. Someone has already remembered Glen Campbell but how about Howard Roberts and Ted Greene? Whoa! How can you guys have neglected Barney Kessel, truly a top ten contender?
These handpicked guitars represent the very highest-end when it comes to collector-grade, vintage instruments. Take a look at these stunning, investment-level guitars and basses from the golden eras of Fender, Gibson, Gretsch, Martin, Rickenbacker and more. These stunning specimens are the things of gearhead dreams, and even if you can't afford one today, there's still plenty of fun to be had perusing and exploring these iconic guitars.
It's important that an acoustic guitar feels comfortable for a beginner guitarist. How a guitar feels may vary from player to player. Is the fretboard easy to play? Is the body of the guitar the right size (hopefully not too big)? An acoustic guitar with too big of a back-end may cause irritation to the inner side of the strumming arm. Also, make sure the fretboard is flat and there is no buzzing. Are the tuning heads easy to turn? And make sure the strings are not too high off of the fretboard.
The most underutilized sonic tool that electric guitarists have is built right into their instruments: the volume and tone dials. Most players tend to leave their guitar’s volume up full and set the tone knobs in one place and work from there, but with a little practice it’s easy to get used to using these potentiometers or pots — which are contacts that control voltage — to sculpt interesting sounds.
On the extreme end of things, adding a lot of reverb to your tone can create large, expansive soundscapes where the notes are less distinct and everything forms one carpet of background sound. Reverb pedals often have a number of controls, from the most basic knobs controlling the volume of the effect (known as “mix”, or how much reverb is mixed into your guitar signal) and the length each note reverberates for (known as “decay”), to more versatile pedals that have controls for different kinds of reverb such as “small room”, “plate” and “arena”.

Guitar pedals and other effects, including an early version of the wah-wah pedal used by Jimi Hendrix and the Tone Bender fuzzbox pedal, a Vox variation on the famous original Gary Hurst Tone Bender (used by Jimmy Page of Led Zeppelin and Jeff Beck of the Yardbirds as well as The Beatles, Spencer Davis and others), were also marketed by Vox and later on manufactured in Italy.
The 600 series pairs maple back and sides with a spruce top that has gone through Taylor’s torrefaction process, which accelerates the wood’s aging process through heat. We couldn’t find a single fault with this guitar’s build quality and the 612ce is an unbelievably comfortable guitar to play. The tone is still that of a maple guitar, but a more refined one than we’re used to. Likewise with the torrefied spruce: it’s immediately familiar, but with enough difference to cause a cocked ear. Strumming out chords and standard singer-songwriter fare was pleasing, and it put in a good shift with some country-style flat-picking, but it is fingerstyle playing that this guitar lives and breathes. By any token these models from the 600 series are stunning guitars. They have a laudable ecological footprint, they look superb and they have rich, unexpected tonal qualities. 
The Yamaha Pacifica has long proved a benchmark for quality and specification, and the 112V remains one of the best guitars for beginners. The 112 is far from fancy and simply concentrates on the bare necessities. Yet the construction is of excellent quality. Trust us, if looked after this will be a guitar for life. By design it's an altogether more modern, brighter and lighter take on a hot-rod Strat. But when we say brighter that doesn't mean overly shrill. In fact the bridge humbucker will surprise some, it's beefy without being too mid-range heavy and although the coil-split proves a little bland played clean, with a distortion boost it's a pretty useful gnarly and wiry rhythm voice. It's good to have the choice too when mixed with the middle pickup - switching between the full and split coil here is subtle but, especially with cleaner 'class A' amp voicings, there's enough character difference to be useable. The solo single-coils impress - plenty of percussion and with a little mid-range beef added from the amp these get you to the correct Texas toneland. Neck and middle combined produces a fine modern Strat-like mix - the added brightness will cut through a multi-FX patch nicely.
We currently recommend the very popular Seagull S6 Original Cedar Slim as one of the leading beginner guitars and we named the Seagull Maritime SWS SG as the equal second highest rated acoustic guitar between $500 and $1,000 in October 2016. And in August of 2017 we named the Seagull Entourage Rustic CW QIT as the highest rated acoustic-electric guitar under $500.
Overall length is 28 1/2 in. (72.4 cm.), 10 in. (25.4 cm.) width, and 1 5/8 in. (4.1 cm.) in depth, measured at side of rim. Scale length is 15 1/4 in. (387 mm.). Width of nut is 1 3/4 in. (44 mm.). All original and complete, and quite clean overall; there are a few small dings to the finish and some light checking-almost inevitable on the Eko-made Vox instruments. The only notable finish marring is one spot where a superglue repair to a cracked pickguard corner left a bit of residue behind. A very nice little player, with an awful lot of chime! Excellent - Condition.
While it won’t necessarily get you to Hendrix levels, it is a useful approach for beginners who want the focus to be on keeping enough fun and practically in practicing guitar. And while you still absolutely have to practice, this method shows tips and tricks up front to keep learning theory fun. It will also include enough information around traditional arpeggios, tunings, and scales to make sure you will learn music theory.
The full-size electric guitars we tested are the Epiphone Les Paul SL, Ibanez GRGA120 Gio, Indio 66 Classic, Indio Retro DLX Quilted Maple, Jackson JS11 Dinky, Squier by Fender Affinity Series Jazzmaster, Squier by Fender HSS Bullet Strat, and Yamaha Pacifica PAC012. The short-scale guitars we tested are the Epiphone Les Paul Express, Ibanez GRGM21 Mikro, Jackson Dinky Minion JS1X, Jackson Rhoads Minion JS1X, and Squier by Fender Mini Strat.
The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.
Ah yes, the 808. It's often used and referred to as a kick, but it tends to act more as a very low tom, as it has a pitch. This thing is the Loch Ness Monster – there tends to be more under the water. The best way to deal with a true, clean 808 sample is to work around it. It's usually best to let the 808 do its thing and to get the bottom end around it the hell out of the way. If it's a fuzzy sample or has been driven and squashed, you may need to play with things above 250 Hz, but usually live and let live is the best approach.
Thanks for the post on ’66 Deccas and the video. I have a red sunburst DMI-203 with the chrome pick guard as in your picture. My first electric guitar in 1966 was the same instrument with no name on the headstock but with paperwork saying GHI/Heit. Bought it in a department store plus a Concordia amp for $50. Sold it in ’69 when I needed cash for a car (for $75!). I picked up the Decca about 10 years ago. Vintage Guitar magazine did an article of some work done on it in it’s Jan. 2014 issue.
In 1935, the Dobro Corporation and National Stringed Instrument merged to become the National Dobro Corporation. The Dobro operation moved into the larger facilities of National, however, the two organizations never really reintegrated. Both National and Dobro maintained separate production lines, sales organizations and distributors throughout the rest of their L.A. tenure. Before long, as we shall see, National Dobro would relocate to Chicago while keeping its facilities in L.A. for a few more years. Dobro production would continue in L.A. through ’37 or so, with some leftover parts being assembled perhaps as late as ’39, after which the Dobro name went into hiatus until revived by the Dopyeras in ’59, but that, too, is another story in the Big Guitar City!
Let’s not beat around the bush. The accessories that come with this package (tuner, amp) aren’t the greatest. But they make do. The REAL strength of this package lies solely with the guitar. The guitar is fantastic. Super easy to play (and thus play fast), and to learn on. I’ll explain why that’s important later on. But bottom line, this is a great choice if you want a quick all-in-one package that includes a great guitar.
How does it sound, you ask? Guitarists generally agree that Line 6 tones are as good, if not better, than any digital sound out there from the likes of Boss and DigiTech. One really cool and intuitive thing is that the small display screen has a color-coded background depending on what type of effect you’re on. It’s a little thing, but such smart thinking from Line 6. Delays are green, Modulations are blue, Distortions are yellow, Filters are purple, and Reverbs are orange. Modulations and delays sound fantastic, and will stack up against a Line 6 DL4 or Boss DD-X box any day. Compressors, overdrives, fuzz, and distortions are usable but less than stellar, which unfortunately is the norm for digital effects. We actually tried using the Line 6 M5 with a solid-state amp, and the dirt effects sound much better going into that than they do into a tube amp (your milage may vary). Remember, this is not meant to replace your entire board. Over time, if distortion is your thing, you can get a dedicated analog distortion stompbox and keep the M5 for the other dozens of effects it does really well. For effects like volume and wah, you’ll be glad to know the M5 has an input for an expression pedal, which you’ll want to invest in if you care to use those types of effects (check out the EX-1 here if you care to stick with Line 6). If you don’t feel like editing patches and want to jump right in, you get plenty of presets to scroll through (the two footswitches let you scroll up and down between patches). Some presets are a little outrageous, but with a little editing you can reel them in and make them more usable. And speaking of scrolling up and down through presets, at first we were disappointed that we had to scroll through all 100+ patches to find the ones we like. Turns out you can make a favorites list of up to 12, and scroll only through those. Again, we’re continually impressed by the little things on the M5.
Because bass amps have to reproduce lower frequencies than an electric guitar amp, and it takes more amplifier power to reproduce bass frequencies, a bass player will typically need three or four times the wattage of the electric guitarist.[16] For example, if an electric guitarist has a 100 watt amp, the bassist in the band should have a 300 to 400 watt bass amp. For electric guitar amps with 50 watts or less of power, a bass player may need an even higher multiple. While an electric guitarist will often find that a 50 watt amp will be adequate for rehearsals and mid-size performance venues, a bass player performing alongside this electric guitarist will typically need at least a 300 watt bass amp, six times the power of the electric guitar amp, to get a good bass volume. "More advanced players who regularly gig in small to medium sized venues...typically [use amps that] produce 300-700 watts of output."[17] Bass players using bass stacks in very large venues (e.g., stadiums, outdoor festivals) may use amp heads that put out 750 to 2000 watts of power. British rock bassist Mo Foster tours with a 1,500 watt bass rig.[18] Somewhat controversially, as there is no clear engineering support, many think that a tube bass amp will sound louder than a solid state bass amp of the same wattage.[19]
Back when they were starting, Jackson guitars were only available to the elite few, mostly heavy metal artists. After being acquired by Fender, Jackson has since expanded into the entry level realm with mass produced versions of their popular guitar designs, including the Dinky shape. The JS11 Dinky does just that, making the Jackson Dinky a beginner and student friendly instrument that more players can enjoy.
The first “real” guitar I ever bought for myself as a teenager was an Ibanez RG much like this one, and I played that guitar for almost 10 years before buying yet another Ibanez RG. Note that this model does not have a tremolo, which means great tuning stability and fewer headaches when it comes to changing strings, tuning, and setup. However, you won’t be able to perform any crazy whammy tricks, so be sure you’re okay with that. Mahogany body, two hot humbuckers, jumbo frets, and an ultra-stable 3-piece maple neck. Hard to beat at this price point. Love it.
At the end of the day, sustain is just a fancy way of saying the length of time a note will remain audible after you pluck it. Sustain is mostly dependent on how much the body and wood of your guitar can resonate sound. Typically, solid-body guitars are the go-to source of sustain, but many pedals and amps are built with the purpose of increasing the effect. Some people prefer long sustain for certain genres; others simply are too lazy to want to pluck the string again.
Gibson produced only hollow body electrics until 1952, when the first Les Paul solid bodies hit the market. But that still left a gap. Certain players wanted a guitar with the versatility of a Les Paul, but the warmer, mellow tone of a hollow body — albeit one that could be played at high volume. A solid wood block runs through the center of the guitar’s body, allowing greater sustain and less feedback at high volumes than hollow bodies, while the winged side of these guitars’ bodies still provide for a mellow tone thanks to their acoustic resonance.
If the Schecter wasn’t quite fast enough, this lower priced version of Steve Vai’s signature guitar should get the job done. The Wizard III neck is a direct copy from its more-expensive variation, and when combined with the 24 jumbo frets, creates a speed machine. Because Vai himself is a versatile guitarist, though, this guitar can pretty much do it all, though if you like a chunky neck for chords, you’ll have to look elsewhere. You even get the Tree of Life inlay at twice price, which looks great.
The golden question is: What is the difference between acoustic and electric guitars. The primary difference between the two types of guitars is that acoustic guitars produces sound entirely through vibration. Its sound is emitted through the vibration of the string when it’s plucked back and forth. Electric guitars, on the other hand, are powered through electricity and electromagnetism generated through its components are what drives the sounds that come out of it.
Two-handed tapping was the hoariest of heavy-metal clichés until Marnie Stern reclaimed the concept on behalf of indie-prog bedroom shredders everywhere. No one would ever confuse Stern’s chops with Eddie Van Halen’s, but that’s kind of the point: If Stern’s shredding exudes the agreeably skewed internal logic of the self-taught, it also allows her to utilize the two-handed technique far more creatively than the pseudo-classical chest-puffing that usually comes with Dokken territory.
Classical guitars have nylon strings, which are softer than steel strings, and easier to press down. However, the neck is much wider on a classical guitar, which can be a struggle for beginners. The action is likely to be higher, as well. In general, they are softer-toned and don't project as well as a steel string acoustic, which makes for quieter practising, which could be a consideration.
By 2001, Michael Kelly Guitars added its first acoustic guitars and electric guitars. These collections have evolved and are now sold around the world. To this day, Michael Kelly remains focused on our vision statement to be "Built On Sound" and each time we put the cherry on top by giving the musician a bold look. We are proud that we do not offer the cookie cutter boring guitars that are readily available from so many brands. We know there are players that prefer classic simplicity and we very much respect that. However, Michael Kelly will continue to be the brand of choice for those that prefer something more boutique and unique.

Again, it's a matter of personal preference and style. Many people prefer to learn on acoustic guitars, but the strings are much tougher which causes fatigue to learning fingertips. The strings produce a buzzing effect as they are hard. Harder strings mean that learning fingers will find it hard to play bar chords. On the other hand, electric guitars offer comfort while holding down chords as the width of the neck is shorter than that of an acoustic guitar. The strings on an electric guitar are softer which makes means you can practice longer without your fingers getting sore. The habit of playing with light strings from the beginning can trouble in near future as acoustic guitars are also needed in various music production situations. And don't forget, you'll need to pick up an amp and so on to play your electric guitar.

* P A W N S H O P * G U I T A R S * Serving The World With Quality Vintage and Used Gear!- Up for sale is a 1960'S Norma Guitar Japanese Vintage Project As Is!- Good Japanese project- missing nut, bridge, knobs, electronics need work, but pickup is ok- very noisy- lots of body checking and neck needs work- truss barely turns- missing tuner ferrules- head stock logo is loose- even if I forgot something this item is sold as is with no returns!- this is definitely a worthy project- from the MIJ Hay... more
For the most part, you might want to get a preamp that has at least some type of EQ on it. Tone shaping on an acoustic electric guitar can really give you an edge or at least a semblance of control before the sound guy butchers it during your gig, although you can do this with an effects pedal. Even though this is something that takes the time to learn, it's better to have the option readily available when you decide to step up to that level.
Many experiments at electrically amplifying the vibrations of a string instrument were made dating back to the early part of the 20th century. Patents from the 1910s show telephone transmitters were adapted and placed inside violins and banjos to amplify the sound. Hobbyists in the 1920s used carbon button microphones attached to the bridge; however, these detected vibration from the bridge on top of the instrument, resulting in a weak signal.[2] With numerous people experimenting with electrical instruments in the 1920s and early 1930s, there are many claimants to have been the first to invent an electric guitar.