A well-rounded complement of inexpensive microphones for recording an electric guitar would consist of a Shure 57 (a must have), an inexpensive condensor mic or two (I like some of the AKG models like the C-1000 and the C-3000), and an inexpensive compressor/limiter (dbx makes a few models that are a great value). If you have, or can borrow these mics, it almost doesn't matter whether you're recording on a 4-track Porta-Studio or using a Mackie 8-Bus with 24 tracks of adat, your guitar will sound great.
There are a few ways to save some money on your electric guitar (click for modal analysis). One way is to order online, for example from Amazon, which is usually cheaper than buying from a physical shop. Make sure that you know what the usual price for the guitar you want is, so that you can compare different sites, and in the best of worlds, use a discount code or wait until there’s a sale.
Beginners face this very common problem when they go for the cheaper options. The strings are usually far from the fret board, and due to lack of knowledge, many think that this is how it was meant to be. Such a guitar brings pain to the fingers since force has to be applied to lower the string to the fret board so as to produce sound. All these difficulties make it very hard for a beginner to learn the guitar. For you to learn the guitar quickly and without problems, you should get a guitar whose distance from string to fret is less.
When it comes to buying an electric guitar there are a lot of options available, and choosing one can be confusing. This guide will help you understand the basic differences in electric guitars so you can make an informed decision. And remember, we’re here to help with friendly Gear Heads available at 1-800-449-9128 who can guide you to the electric guitar that best meets your needs.
For those students who want a simple path to good sound and don’t want to confront a wide range of tone and effects options, we recommend the Orange Crush 12. It’s a fairly traditional amp with controls for Bass, Midrange, Treble, Volume, Gain, and Overdrive (distortion). There’s nothing on the Crush 12 that can’t be sorted out with a few twists of a knob and strums of the strings.

Martin & Co is without a doubt one of the most reputable acoustic guitar makers in the world, so if you or someone you know is planning to spend a lot of dough on an acoustic guitar - it best be a Martin. One of the more recent releases from Martin that deserve special mention here is the 00-42SC John Mayer, a signature guitar inspired by the classic Stage Coach(SC) design, which were prevalent in an era where small bodied parlor guitars were highly favored.
The ADA MP-1 was a legend for it’s superior versatility at the time of it’s release. Since first becoming available during the 80’s, players vied after it for it’s midi switching capability via footswitch. Paul Gilbert is most famous for his loyalty to the amp during the spawn of his career.  It runs on two 12AX7 preamp tubes and has three main voicings — Solid State, Clean and Distortion. One downfall of this amp stems from it’s lack of an input volume control, but thanks to a host of mods available nowadays for this thing, one can look really look past this minor flaw. On top of that, you can find them used for around $250! A steal for 80’s tone-in-a-box.
This guitar continues to rake in good reviews and recommendations, even from experienced players who are looking for a compact couch guitar. This says much about its build-quality, tone and production consistency. If you are just starting out and you are not sure what to get, or you're simply looking for an affordable grab-and-go guitar, then checkout the Yamaha JR1.
Having humbucker pickups (sometimes just a neck pickup) and usually strung heavlly, jazzboxes are noted for their warm, rich tone. A variation with single-coil pickups, and sometimes with a Bigsby tremolo, has long been popular in country and rockabilly; it has a distinctly more twangy, biting tone than the classic jazzbox. The term archtop refers to a method of construction subtly different from the typical acoustic (or "folk" or "western" or "steel-string" guitar): the top is formed from a moderately thick (1 inch (2.5 cm)) piece of wood, which is then carved into a thin (0.1 inches (0.25 cm)) domed shape, whereas conventional acoustic guitars have a thin, flat top.
This is one of our favourite cheap electric guitars and it certainly doesn’t suck thanks to its Alder body, comfortable “C” shape neck, snappy maple fingerboard and two Vintage-Style Single-Coil Tele pickups to provide that awesome tele twang. If you’ve always wanted a Telecaster and are just starting out in the world of guitar, this is a dream beginner’s guitar that is budget friendly and still completely high quality.
I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.
This guitar sounds tighter and is less loud than a dreadnought. But its construction warms its tone considerably. Its owners say that its tone is well balanced – clear and punchy but still warm. It offers clarity in the higher registers, but some boom in the lower registers. For that reason, the LL16 is suited to almost any style of playing. It will not, however, be as punchy as the Taylor 210 or as round sounding as the Blueridge.
As with so very many elements in the great world of guitar, however, once the novelty wore off and we were less awestruck by the new technology—and, in many cases, came to realize that we had little use for 2 seconds, or even 500 milliseconds of delay time—many of us came to miss the warm, pliable sound of the analog pedals. Today, as with all such things, the jury is still out; plenty of great players use each type of pedal, and the music you make with the technology remains more important than the type of technology you choose to use to make music. Used in isolation, at the same delay settings, each would probably sound just a little different to a guitarist with good ears. At the back end of a pedalboard with eight or ten other effects on it and three or four running at a time, the differences are likely to be negligible—but different players have different preferences, depending on what makes them feel good about their tone.
{ "thumbImageID": "LTD-Deluxe-EC-1000-Electric-Guitar-Amber-Sunburst/516629000027000", "defaultDisplayName": "ESP LTD Deluxe EC-1000 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Amber Sunburst", "sku": "sku:site51273887999423", "price": "869.00", "regularPrice": "869.00", "msrpPrice": "1,241.43", "priceVisibility": "1", "skuUrl": "/ESP/LTD-Deluxe-EC-1000-Electric-Guitar-Amber-Sunburst-1273887999423.gc", "skuImageId": "LTD-Deluxe-EC-1000-Electric-Guitar-Amber-Sunburst/516629000027000", "brandName": "ESP", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-Deluxe-EC-1000-Electric-Guitar-Amber-Sunburst/516629000027000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51273887999449", "price": "869.00", "regularPrice": "869.00", "msrpPrice": "1,241.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-Deluxe-EC-1000-Electric-Guitar-Black-1273887999449.gc", "skuImageId": "LTD-Deluxe-EC-1000-Electric-Guitar-Black/516629000001000", "brandName": "ESP", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-Deluxe-EC-1000-Electric-Guitar-Black/516629000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Vintage Black", "sku": "sku:site51273887999287", "price": "899.00", "regularPrice": "899.00", "msrpPrice": "1,284.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-Deluxe-EC-1000-Electric-Guitar-Vintage-Black-1273887999287.gc", "skuImageId": "LTD-Deluxe-EC-1000-Electric-Guitar-Vintage-Black/516629000011000", "brandName": "ESP", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-Deluxe-EC-1000-Electric-Guitar-Vintage-Black/516629000011000-00-60x60.jpg", "imgAlt": "" } , { "name": "See-Thru Black Cherry", "sku": "sku:site51273887999131", "price": "899.00", "regularPrice": "899.00", "msrpPrice": "1,284.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-Deluxe-EC-1000-Electric-Guitar-See-Thru-Black-Cherry-1273887999131.gc", "skuImageId": "LTD-Deluxe-EC-1000-Electric-Guitar-See-Thru-Black-Cherry/516629000127000", "brandName": "ESP", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LTD-Deluxe-EC-1000-Electric-Guitar-See-Thru-Black-Cherry/516629000127000-00-60x60.jpg", "imgAlt": "" } ] }
If you know how to play an E major chord, then you know how to play an A minor chord—just move the chord whole shape over a string. Make sure your first finger is curled, so the open first string rings clearly. Avoid playing the open sixth string when strumming the A minor chord. There are situations when it makes sense to reverse your second and third fingers when playing the A minor chord.
Tone pot usually connected just as a variable resistor (one lug is not connected), so you got some “small” resistance (when compared to amp’s input) and a cap going to the ground. When you crank your tone there is no significant resistance, so all signal above cutoff freq is shunted to the ground (with graduate slope) — but still this is the brightest position of the tone pot.
Play heavy rock or metal music? Listen up! These guitars feature a twin horn cutaway shape and a long-neck design. They are lightweight compared to the Les Paul, but can be difficult to get used to. They can feel unbalanced because of the long neck. They have two humbucker pickups like Les Paul guitars but have different volume and tone controls for precise settings.
Pick-Ups – The pickup is preset underneath the strings, on the body of the electric guitar and it works as a magnetic field. When the metal strings are plucked they vibrate and generate a current that is transmitted by the pickup to the guitar cable and to the amplifier. These may is just a single pickup in a guitar or 3 to 4 pickups depending on the guitar.
The basic function of the volume knob is to change the level of your guitar’s volume output in a smooth and even way. But there’s more to it than that. Some players use the volume knob as a means of boosting their signal to make solos pop out. For example, if you keep your volume dialed in at seven or eight and perhaps lean on your amp a little more for output, you’ve got two or three more notches to ride your loudness up via the knob when it’s really time to burn. No need to spend money on a volume pedal, and unlike distortion or overdrive pedals this doesn’t change your sound much.
Taylor's rise to fame has been relatively quick, thanks to their combination of impressive build quality and tone. Their diverse list of celebrity endorsers also helped, which include artists from different musical styles like Tony Iommi, Jason Mraz and Taylor Swift. Founded in 1974, the company has grown to be a major competitor in the acoustic guitar market, challenging older and well established brands in many price points. The Taylor 110ce is one of their more popular models, a mid-priced acoustic with solid spruce top that makes for a great entry point for intermediate players who want a "branded" workhorse acoustic.
Next up are the wonderful vintage Kluson reproductions by TonePros (Fig. 16). These are some of my favorites, and they weigh in at a moderate 186 grams with all hardware included. For many of my builds, the characteristics of these tuners are ideal. I enjoy the modern engineering these tuners hide within their vintage-styled exteriors, and the weight is almost perfect.
The Ibanez Artcore line is a beautiful example of modern guitar manufacturing. Normally, hollow-body guitars, even those from Epiphone, provide interesting challenges to companies trying to produce axes on a mass scale, and thus they have to charge a higher dollar. The Artcore series provides buyers with an option to shell out a fraction of the price for a really impressive guitar. The AF55 is a fully hollow option that will make you think you should have paid double for it.
The Effect: Pedalboards are not guitar effects, but are an essential piece of equipment for every musician utilizing more than 2 or three pedals. Essentially, a pedalboard is a casing for guitar pedals, specially crafted to house a number of effects – typically ranging from 4 to 12. In some cases, boards come as just casings and it’s up to the player to sort out the electronic department and powers supply; in other cases, all the electronics are included in the mix and even cables are included. So in a nutshell, boards make your pedal use far more convenient and practical. In our opinion, they are an absolute must-have for any player who has more than two effects in use. For a first pedalboard I would recommend the Donner DB-2 as a great option.
During the Advanced Electronics class students will build a simple low impedance booster by hand, from paper to breadboard, to a point-to-point wired circuit board.  The Booster can be put into a guitar or other type of enclosure.  In addition, Scott will familiarize students with his ‘harness wiring’ tool, that is available online by visiting Guitar Modder.
Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
Tokai was founded in 1947 and is based in Hamamatsu, Japan. Tokai began production of acoustic guitars in 1965 and by 1968 was producing electric guitars for the American market. Tokai still exists as guitar manufacturer. Tokai made guitars for Fernandes, Mosrite and Fender Japan. Tokai badged guitars included the house brand Tokai as well as Cat's Eyes, Conrad, Drifter, Hondo, Love Rock, Mosrite, Sigma and Silver Star. Possible badges include Artist Ltd., Gaban, Gallan, Gession and Robin. It's suggested that Tokai made Hummingbird acoustics as well, but if these were related to those made by Humming Bird I haven't quite sorted out yet.
  Technology is not based on good materials and dexterity alone. It's how you finish your work that counts. It's the little details that you labour over until it's just right. It's an arduous process of creating and destroying and rebuilding until its perfect; until there's nothing left to add, and nothing left to take away. Then it's ready. Swing is well known for its attention to detail in our incredible Custom Shop models, but what you may not know, is that we make no distinction between them and our retail guitars. They all receive the same exacting standard we demand of any product that carries the name "Swing". Our attention to quality and detail costs us more than what other manufacturers consider as an adequate alternative. We do not take shortcuts with every detail because we have found that the careful, educated player can hear those shortcuts. Again, it shouldn't come as surprise though, it's really the only explanation why after only 2 years in business we rose to become #1, and have stayed there for three years and counting.
Let’s kick things off in style. This guitar is one of Epiphone’s mid range semi-hollow models. As such, it has to meet much more refined standards. Many wondered if Epiphone was capable of delivering such a guitar, but the answer is a strong yes. With its three Dogear Alnico pups, this thing is a beast. If you know how to handle a semi-hollow, you will find that Epiphone Riviera Custom P93 brings a lot of range. At least that’s the type of impression it left on me.
Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
From an appearance perspective, at least, the most important aspect of the guitar is the body’s finish. The finish of most electric guitars is either a nitrocellulose lacquer, a polyester, or a polyurethane. Nitrocellulose, for the unfamiliar, is highly flammable and also known as gun cotton. It is obtained by the nitration of cellulose, an important structural component of plants. In guitar coatings, nitrocellulose is blended with other compounds and organic solvents to create a lacquer. The solvents evaporate as the lacquer dries.

If you love the sound of both acoustic and electric guitars, but you want to play both at the same time without draping one of each over your shoulder, then an Acoustic simulator pedal is ideal. These pedals take your guitar signal – regardless of what electric guitar you’re playing and make it sound like it’s an acoustic. These are often used by guitarists on stage who want to switch between an acoustic and electric guitar sound during a set or even the same song. The Boss AC-3 Acoustic Simulator is a great option.
The ’55 hollowbody line consisted of no less than eleven guitars. Models included the EP-4, EP-5, EP-6, EP-7, EP-11, EP-12, EP-13, EP-14, EP-15, EP-16, and EP-23. Clearly, in these instances, the numerical designation indicates appointments, not the number of pickups. Some of these are likely to be thin-bodied archtops with no cutaways, some thinlines with a single cut, and some full-bodied archtops with a single cutaway, with either one or two pickups, and probably no vibratos.
I bought this guitar about 1 month ago. I am a small girl 5'2". I just strap this thing on and walk around the house playing. The pickup sounds freaking great hooked up to my Marshall amp. I have several other guitars including a Taylor 210ce which I also love. But this guitar is great for traveling, camp fires, and just plain old jammin. I chose this over the baby Taylor because the Martin had a full heel on the neck where's the taylor baby did not. It also sounded better when I play both the Taylor and the lx1e side by side. I thought that the Martin had a better "feel" to is as well when holding it. It is a travel guitar so it doesn't balance as well when you are standing with the guitar strap but I don't mind that at all. I love this little guy
Every guitarist seeks to produce an expressive and distinctive tone. Unfortunately, figuring out what kind of gear you need can be a baffling proposition. Here are the three main equipment categories that comprise your music-making rig: your electric guitar, guitar amps, and effects pedals and units. These components all work together to create your sound. And because you can swap out equipment and change settings, the creative possibilities are virtually limitless.
If you like to run all your effects into an amp set clean and get your gain sounds from pedals, you probably don’t ever need to consider using amplifier effects loops or a wet/dry/wet rig. If your amp(s) are set relatively clean, you will be able to use any of the effects listed above straight into the front of the amp—and they should sound really good.
Williamson went on to produce and play on Iggy’s classic solo 1979 album New Values, which features gems like “I’m Bored” and “Five Foot One.” The guitarist also played a key role on the follow-up disc, Soldier, anchoring a punk rock all-star lineup that included ex-Pistol Glen Matlock, Ivan Kral from the Patti Smith Band and Barry Adamson from Magazine. Shortly after Soldier, Williamson took a hiatus from rock to study electronic engineering, becoming Vice President of Technology and Standards for Sony.
Who among us doesn’t relate to Nigel Tufnel in This Is Spinal Tap when he tried to explain to “Meathead” that having an 11 on his amp made it louder than – and hence superior to – one having a mere 10? That’s just how I felt back in the day when, after nearly two decades of owning one – that’s only one – guitar, a classical, I decided I ought to get an electric guitar again. Who could have known how slippery that slope would turn out to be?!
A lot of amps, especially in higher price ranges, have a lot of effects and features. They catch an eye and are pretty fascinating, but in a lot of cases, they are … useless. Well, not all of them but I am pretty sure that if an amp has a hundred different features you won’t be using all of them or even half of them. Features on amps are like the stand at the registrar of a grocery shop. They just catch an eye and you want WANT WANT them (for no other reason than it is interesting and cool looking)! Well, if you are going for an amp is the $100 price range you won’t have as much luxury or freedom to choose from a lot of features. Most practice amps are pretty standard and basic (in the best of ways). And to be honest, I don’t think as a beginner you really need a lot more than the basic effects and functions.
Wah pedals can sound eerily similar to a human voice, and they were actually a favorite of Jimi Hendrix, who many have said possessed the most expressive guitar playing amongst all the great guitarists. Wah pedals are great to activate right when you’re about to take a solo and when you really want to make it sound like you’re speaking with the guitar.
You can set an octave to play the higher or lower notes or both at the same time. This is ideal for those who want to really thicken up their sound and are often used by heavy metal guitarists to make solos and riffs sound really cool! The Valeton OC-10 Octave pedal is a budget friendly choice and the Electro Harmonix Nano Pog is an industry standard option.
With JH’s encouragement, I’ve made the decision to produce my own line of premium acoustic guitars, handbuilt as before, to the same high quality, and with an extended option list including other rare woods, finishes, and trim options. The brand I will be using is “Madeleine”, in honor of my late granddaughter who passed away May 2, 2011 at age 1 month.
Peavy amps are especially well appreciated by the metal community, thanks to their good overall reliability and the high volume of sound some models produce. The 6505 Series is a favorite of metal guitarists due to its power and versatility. This is most often used as a head for double stacks of speakers, but it can also be purchased as a 2×12” and 1×12” combo for convenience.
Primarily, reverb pedals tend to give you a lot more variety and control over the effect than you'll have with an amplifier. In fact, most amps that have reverb will have a single reverb knob that you turn up for more of the effect, or down for less. This can work if you use reverb sparingly, but if you're into the effect and like to use it a lot, that's not enough control to really get the most out of your reverberated tone.
When you’re just getting into the electric guitar, there are a lot of items you’ll need to get going. This includes the guitar itself, tuners, straps, an amp, a bag or protective case, a stand, etc. Buying it all piece by piece can be rather expensive. It’s much more practical in financial terms to opt into one of the many starter packs on the market. If you want to know which ones are worth your time, here are the 8 best guitar starter packs for beginners:
For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave.
The SS-4L was almost identical in electronics and other appointments to the SD, with the main differences being in body shape, vibrato and pickups. The body was more like a Strat, except the entire lower horn was lopped off and slanted toward the lower bout. Very, very… well, this is one of those ideas that’s so ugly it becomes beautiful! This had a new, very nifty vibrato system, one of the coolest the Japanese ever produced. This consisted of a plate or platform resting on springs, sitting above the top of the guitar. This then had a metal block with several holes along the treble side, into which the arm was inserted and secured with a thumbwheel screw. The SS-4L had two-tone metal-covered pickups with six poles along the rear edge, two half-slots exposing a gold insert in the center and six holes showing the insert along the front edge. These “two-tones” would become a mainstay of many early ’60s Teiscos.

A 100-watt stack is overkill if you live in an apartment and need an amp only for home recording. Conversely, a 10-watt combo is woefully inadequate if you play in a band with a drummer named Thunder Fist. Choose an amp that’s right for your primary application. You’ll need at least 30 watts for playing live with a rock band, but smaller amps often provide surprisingly huge sounds in the studio—just ask Jimmy Page. Also, as a rule of thumb, if you're playing out often, you might want to shoot for at least 15 watts of tube tone.
Been meaning to try this for years.... Should have done it earlier! It really works well for me, despite a puny Atom cpu in an HP netbook and a kludged lead from an electric Ukulele stuck into the microphone socket. Yes, this lash-up can be noisy - the impedances are mismatched, the signal levels too, but a very respectable result indeed. The processing is highly effective and the presets are (of course) variable in their suitability (not every effect is ideal for a ukulele) with gems that include a really decent and surprising choice of autowah effects. Never thought I'd say that. The user interface is logical, but there is a lot of it. That's because it can do so much. Fortunately there is a 'Random' button that creates random new patches for you - keep pushing it and some fun stuff can emerge. Documentation is helpful - press F1 and have a look, it even includes hardware suggestions and hints. I intend to follow that religiously so as to get the best from this gem - and I'll be spending money to get the suggested full fat Behringer interface (~£20) from Amazon, and trying a less-compact machine with some more CPU to see if that adds to the experience. Problems? A couple of the presets do seem to crash Rakarrack - but apart from that irt has been solid. Recommended to give it a go, if you have not already done so. Both guitar an uke work well with this.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.

“Perhaps the weakest block, and the only one I spend time trying to dial in a decent tone. Lots of high gain fizz options with loss of body and character. Boost is decent, Tscreamer isn't, but for me the Blues choice with drive=1pm, tone=noon and output=11am gave a nice breakup tone without losing bottom end. If you have an overdrive pedal you like..you may still be using it.”
In the 1920s, the earliest combo amplifiers did not have any tone controls. Tone controls on early guitar amplifiers were very simple and provided a great deal of treble boost, but the limited controls, the loudspeakers used, and the low power of the amplifiers (typically 15 watts or less prior to the mid-1950s) gave poor high treble and bass output. This made these early amplifier/speaker systems a poor way for upright bass players to amplify the sound of their instruments.
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
His kustom masterpieces like “Slow Burn” (a 1936 Auburn boat-tail speedster), “Skyscraper” (a 1953 Buick Skylark) and his daily driver known as “The Grinch” (a 1952 Oldsmobile) are drivable works of art that defy the bland Toyota Priuses, Lexuses and Land Rover SUVs of his Northern California environs like a stiff middle-finger salute wearing a skull ring.
Dorado instruments are of decent quality, but are often found at slightly inflated asking prices due to the attachment of the Gretsch name. Remember, these are 1970s Japanese guitars imported in by Gretsch during their phase of Baldwin ownership! Dorados are sometimes rightly priced between $125 to $175; but many times they are tagged at prices double that. Of course, what a guitar is tagged at and what it sells at (cash talks, baby!) are always two different animals.
Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.
As players such as Bobby Broom, Peter Bernstein, Howard Alden, Russell Malone, and Mark Whitfield revived the sounds of traditional jazz guitar, there was also a resurgence of archtop luthierie (guitar-making). By the early 1990s many small independent luthiers began making archtop guitars. In the 2000s, jazz guitar playing continues to change. Some guitarists incorporate a Latin jazz influence, acid jazz-style dance club music uses samples from Wes Montgomery, and guitarists such as Bill Frisell continue to defy categorization.
Located in Kobe, Japan, this manufacturer made the famous Maya brand guitar. Maya guitars were in production from 1970-1980. It's been suggested that Maya may have been responsible for the Aztec badge. You'll notice that Maya has been attributed to a company known as Tahara. At this point I do not know if Maya assisted in production or if Tahara produced some Maya guitars as a subcontractor. Maya and El Maya badges have also been attributed to Chushin Gakki. More research is needed to clarify this point.

It comes in 3 versions. A 15W, a 30W, and a 60W. The 60W and the 30W have 2 channels (each with the 8 analog circuits) so you can set up 2 different circuits and switch between them and 2 12AX7 tubes (pre and post). The 15W only has 1 12AX7 and 1 channel (with 8 analog circuits). I own the 60W and 15W. I use the 60W with a band and I have no problem practicing over the drums with it. The 15W I use at home for practice. Cool thing is both have headphone jack and aux in. I use the aux in at home to hook up my iPhone and practice to certain songs. The 60W has an effects loop and an external speaker out.
Another acoustic guitar. This one sounds nice for fingerpicking arrangements and in general has a steadier sound than the Ibanez. If I had to choose just one of the guitars it would be this one. This one has a much rounder and fuller sound than the Ibanez. Both guitars go well together as they have different sounds to each other. This sound font also has the same presets as the one above.
Blending vintage-spec Alnico V single-coil sparkle, chime and quack with contemporary playability and versatile electronics, the Fullerton Standard Legacy from G&L offers superb Made-in-USA craftsmanship at an amazing price. With a stunning metallic lacquer finish over a resonant solid alder body, this instrument looks as good as it sounds, and the Leo Fender-designed PTB (passive treble and bass) system puts an incredibly wide variety of tones right at your fingertips. The Legacy also features Leo's acclaimed Dual-Fulcrum vibrato bridge for incredible tuning stability and quaver to dive-bomb range that's smooth as silk.
After I published that blog post, a number of beginners wrote to tell me they had a higher budget and would actually like me to recommend some better beginner guitars than those you typically find in starter packs. When I dug deeper, most told me they had a max budget of about $300 for the guitar alone, and weren’t interested in all-in-one starter packs. They wanted a really great (but affordable) guitar and wanted to shop for amps and accessories separately. I further confirmed this with a little informal poll on Twitter:
Eric Patrick Clapton, CBE, is an English musician, singer-songwriter and guitarist. He is the only three-time inductee to the Rock and Roll Hall of Fame: once as a solo artist and separately as a member of the Yardbirds and Cream. Clapton has been referred to as one of the most important and influential guitarists of all time. Clapton ranked second in Rolling Stone magazine's list of the "100 Greatest Guitarists of All Time" and fourth in Gibson's "Top 50 Guitarists of All Time". He was also named number five in Time magazine's list of "The 10 Best Electric Guitar Players" in 2009 In the mid-1960s, Clapton left the Yardbirds to play blues with John Mayall & the Bluesbreakers. Immediately ...more on Wikipedia
The lower strings of a guitar (E, A & D) will often have a nickel winding over their steel core. Nickel also makes an appearance in the frets of most guitars, which are commonly made from nickel-silver. Despite the name, this alloy doesn’t actually contain any silver, but is named for its silver appearance. It’s actually an alloy of copper, nickel, and zinc. These nickel-silver frets aren’t as hard-wearing as steel, so some guitar manufacturers use stainless steel instead to give the frets more longevity.
Second, you might be wondering if it’s just better to get a cinematic VST or one that takes from a range of instruments. Fractured does have cymbals and bass kicks but, of course, the guitar creates these and this gives them a lot of offbeat character. You could easily get a more rich and deep bass kick with a drum VST, but then you lose that quirkiness that propels and highlights Fractured.  
The RockJam RJEG02 is coming from the hills of RockJam’s successful 15 years of producing some of the best and highly selling brands in the market. This full size, quality guitar contains a whammy bar, a guitar strap, a 10-watt amp, spare strings, electric guitar picks and a gig bag—making it a complete package suitable for the beginner and professional electric guitar player.
As the ’60s dawned, electric guitars began to increase in popularity again, and many distributors turned to Europe for suppliers. The Italian makers were the most successful, with EKO, imported by LoDuca Brothers, in Milwaukee, leading the pack. German makers were paced by Framus, which was imported by Philadelphia Music Company, located in suburban Limerick, Pennsylvania. The Scandinavian contingent was represented by Levin, Landola and Hagstrom, the latter picked up by Merson.
There are a couple of tips that can help you out, however. First – as a new learner – you don’t need a stage-ready amplifier or even a high-end boutique amp, as they are both far too powerful and pricey for someone just picking up the hobby. Second, you should look into amplifier versatility. As a new player, it’s likely that you’re still figuring out your own style – and being able to change up your sound without the need for a bunch of extra peripherals is incredibly valuable in figuring that out.
To show you how to read the chords diagrams above, let's use the A chord as an example. For the purposes of chord diagrams, here is how your left-hand fingers are numbered. As you will notice, the index finger is denoted with number 1 the middle with 2 the ring finger with 3 and the pinky with 4. These numbers are used on the diagrams to show you what fingers use for pressing the frets composing the chords.
In the early Sixties, Blackmore did sessions with legendary British producer Joe Meek and apprenticed with U.K. session ace (and Jimmy Page mentor) Big Jim Sullivan. Blackmore founded Deep Purple in the late Sixties and led the group through various incarnations. He also spearheaded metal icons Rainbow with the late Ronnie James Dio and has more recently played a role in Blackmore’s Night with his wife Candice Night.
The L-00 carries over the airy nasal tone and midrange emphasis of the original, making it great for tasty slide and classic rock riffs. Your favorite blues licks will also have more oomph when played through this blues box. For something so small, this parlor guitar can compete with standard size acoustics in terms of volume. Its solid sitka spruce top and solid mahogany back and sides work together well to give this seemingly diminutive instrument great clarity and good low end.
Electric guitars are the easier to play as compared to acoustic guitars. But only because the chords are easy to play, that much force is not required to hold the chords as well as strum the chords. So it would better if you first practice the chords and the strumming on an acoustic guitar. The song Yellow by Coldplay, mentioned below, is considered as one of the best guitar tabs for beginners.

Today I was working on my fave guitar, a James Trussart Steelcaster. Instead of reconnecting my tone pot and capacitor as usual, I ran two wires from the tone pot’s wiper and ground terminals, the spots where the cap normally connects, and soldered them to a little piece of stripboard with sockets for connecting the caps. Then I recorded quick demos for six possible cap values. I started with the two most common values, and then added two lower values and two higher ones.

In 1947, Jerry Wexler, a writer for Billboard Magazine described African American music as ‘Rhythm and Blues’ and its appeal was spreading fast and wide helped by the popularity of the radio DJ. People across the states would tune in to their favourite stations to hear the music they loved. Whether or not the song was performed by black or white musicians became irrelevant.
Teisco first began importing guitars to the United States under their own brand in 1960. In 1964, the company then switched the name of their U.S. brand to Teisco Del Rey. The company was then sold in 1967, and the Teisco brand name stopped being used for guitars sold in the United States in 1969. Guitars were still sold under the Teisco name in Japan until 1977.

The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.
We received a quote so promptly and after already seeing so many other rates in the DFW area, I knew instantly that this was the best value. My 8 year old son is shy and even though he was super interested in learning how to play the guitar, I worried that he’d have a hard time connecting with whoever we chose. After about 5 minutes into the lesson, that fear was long gone. Jack was awesome with him and very patient. He showed up right on time which was great because any parent knows that adding one more thing to an already busy schedule isn’t always the easiest thing to do. Great experience so far!
Of course, this top-down lecturing is all very abstract without examples. Let me give you the worst case scenario. My school talent show, 2008. Two friends of mine performED an ambitious but utterly inappropriate Metallica cover in front of the other students, their parents and the faculty. It was excruciating. Although the solos (presumably the only thing they had bothered to practice) were technically flawless, the whole song was undone by their terrible rhythm. The timing of the song became displaced, the chords were so badly fingered that it was difficult to hear the riff and consequently the whole performance fell apart. They looked like morons. They had sacrificed learning basic rhythm and paid the price. Make sure you don’t do the same.
Fender guitars are the most popular and are considered as one of the best brands in the world. Fender guitar is manufactured by the Fender Musical Instruments Corporation of Scottsdale, Arizona. They are specialized in making stringed instruments and are best in making the solid body electric bass guitars. Fender Musical Instruments Corporation was incorporated in the year 1946 and is a relatively new company, but with the quality of products they make and the success they achieved, Fender is easily the best guitar manufacturer in the world.
Some of the most well-rounded acoustics on the market. They may not boast the character of some of the big names like the Martins and Gibsons but they fit in most musical situations just as well. Remember that Takamine achieved its success by copying Martin guitars - and they did a good job. Also they have some of clearest and cleanest electronic preamp systems on the planet. In fact, they essentially pioneered the style of electronics that we see in most guitars today. While you can spend an arm and a leg on one, you don't have to. I've had Takamines under $1,200 that played phenomenally. Don't make your purchase until you've tried one out.
Loose frets are especially problematic in certain old guitars, but are generally very easy to fix. You'll be amazed at the difference you can make with just a few tools, a bit of knowledge, and a little time. Fixing loose frets can eliminate fret buzz, remove sharp fret ends, and greatly improve the tone of any guitar. If your luthier bill will be greater than the value of your guitar, definitely time to have a go yourself!

We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.

Les Paul developed one of the first practical solid-bodied electrics made of wood, which he dubbed "The Log". He built the prototype himself -- possible the first practical solid-bodied electric -- in the late 1930s. In 1941, he approached Gibson about making it, Gibson, but they weren't initially interested. Meanwhile, Leo Fender had been independently been developing his own solid bodied guitar, which was released commercially as the Esquire in 1950. By then, lots of people were recording electric guitar.

So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.
The stompswitches take a couple stomps to cut on. There also some tape residue around the led lights where someone covered them. But its not a huge issue for reverb considering that the way I play, I always have a little reverb on to add texture and presence to my tone. Also, if you have a pedal switch looper that you can run all your pedals through it can stay always on that way too. But I'm going set the bidding price lower just because they don't work 100% properly and the tape residue. Other than the issue with the stompswitches the effect works great. Just clarify, you have to stomp on the switch 2 or 3 times and it cuts on.
First, you have 11 different modes, including the TonePrint option, just like the Flashback delay. Then you have a true bypass circuit with an analog dry-through signal, which perfectly preserves the natural tone and EQ of your acoustic guitar (again, similar to the Flashback's setup). When you're using the effect, we would advise tinkering with the mix to get about 35-50 percent of your dry signal coming through.

Upgrade your guitar or bass and get the full sonic potential from your pickups with a complete electronics parts kit. Our Guitar & Bass Super Kits include the best quality parts from CTS, Switchcraft, CRL, Orange Drop and Alpha. Kits available for most popular types of guitars and bases. We also have the PMT Passive Sonic Expansion Control kits to take your instrument to the next level of tone perfection!
Volume pots don’t attenuate all frequencies consistently. Treble gets attenuated faster which results in treble loss when volume is rolled down. Treble bleed circuits (or bright caps) are there to compensate for treble loss and make guitar sound at lower volume as close as possible to sound with volume maxed. There are several different treble bleed circuits used or recommended by guitar/pickup manufacturers. What’s common between them is that they are installed across guitar volume pot (input and output lug).

Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
Gibson ES-335 Figured Electric Guitar The Gibson ES-335 thinline archtop semi-acoustic electric guitar is a popular choice among blues, rock and jazz musicians because of its warm tone and near-zero feedback. The 2019 Gibson ES-335 Figured model features a thermally engineered chambered maple center block, a hand-wired MTC Premiere control assembly, an ABR-1 bridge with titanium saddles and all-new MHS II humbucking pickups.
Valco manufactured Spanish acoustic guitars, metal-bodied resonator guitars, electric lap steel guitars, and vacuum tube amplifiers under a variety of brand names including Supro, Airline, Oahu, and National. They also made amplifiers under contract for several other companies such as Gretsch, Harmony, and Kay. In the 1950s they began producing solid body electric guitars.
Clean or replace switches. To clean switches use solvent such as contact cleaner in a spray into the toggle itself, you may also use other solvents such as WD-40, always work the solvent around by using the switch as indented. To replace switches first obtain a proper switch that applies with your guitar, then soldering in accordingly. Work in a well-ventilated space to avoid harmful fumes from solder or solvents.

The Yamaha APXT2 is a 3/4 size version of the world's best-selling acoustic-electric guitar, the APX500III. This well-constructed, compact guitar makes a great companion when you're on the road. The APXT2 features an ART-based pickup system and Yamaha's proprietary tuner, offering great sensitivity and accuracy for quick tuning. The APX T2 also includes a gig bag.

The guitar itself is decent, both my 8-year boy and his guitar teacher like it. But the mini amplifier is a BIG JOKE, seriously - it only uses a 9V battery and so small in size and so low in volume, you can barely hear it. There is a 9V DC power plug port. However, when I plugged in a 9V DC power plug (it is not included, but I found one in my toolbox), it only gave me white noise without any sound (the 9V battery can still give out a little bit volume). Initially, I thought the guitar was broken until I tested it on my home theater, then I realized it was the problem of the useless mini amplifier. I ended up buying a Fender amplifier for my son so that he can play some loud music.
With electric specifically, it's important to ask what genre's of music do you want to play and who are your influences. A humbucker pick-up found in Les Pauls and SGs sound MUCH different than single-coils found in Stratocasters and Telecasters. If you like the sound of your guitar heroes, chances are you will like playing through similar gear. Again, go with my BUDGET, FEEL and SOUND trifecta!
Ovations reached the height of their popularity in the 1980s, where they were often seen during live performances by touring artists. Ovation guitars’ synthetic bowl-shaped back and early use (1971) of pre-amplifiers, onboard equalization and piezo pickups were particularly attractive to live acoustic musicians who constantly battled feedback problems from the high volumes needed in live venues.[citation needed]

But is the Fender Deluxe really as good as the name suggests? We certainly think it is! Even though it would be easy to just write it off as an electric guitar for country music, it’s actually really versatile and can be used for any other genre as far as we’re concerned. This is thanks to two vintage noiseless pickup configurations, one on the neck and one on the bridge, and a strat pickup in the middle.
Rickenbacker manufactures three distinct pickups for their current standard models: Hi-gain, Vintage Single Coil Toaster Top, and Humbucking. All three pickup designs share the same footprint, allowing them to retrofit into most current or vintage models. The tone varies from one style to the next, partially because of the types of magnets used[13] but also due to the amount of wire wound around the pickup’s bobbin.
But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
The other guitarish plugins that contribute to the best most real guitar VST include amp emulators to get that warm, liquid sound of tube amps, along with VSTs for almost any other effect ever hauled on stage. Those amp-and-effects VSTs might be used by actual guitarists as well, in various straight-to-computer workflow setups - either through a DAW host or otherwise maybe straight through some standalone VSTs to amp, headphones, recording device or onboard speakers.
The final stages of on-board sound-shaping circuitry are the volume control (potentiometer) and tone control (a low-pass filter which "rolls off" the treble frequencies). Where there are individual volume controls for different pickups, and where pickup signals can be combined, they would affect the timbre of the final sound by adjusting the balance between pickups from a straight 50:50.