The pickup itself consists of a long magnet, or a number of cylindrical magnets in a row, around which is a wire coil. The vibrations of the electric guitar’s strings cause changes in the magnetic field of these magnets, which in turn is able to induce a current in the coiled wire. This current is then passed on to the amplifier, which produces the sound. The stronger the magnets used in the pickups, the more sensitive they are to the string’s vibrations.
So I'm babysitting this guitar for a broke person and I happen to be not so much broke and he left this guitar over here. Not that I'd take advantage of anyone, but after playing it, I wouldn't mind having it. I went through 3 pages of google and didn't really find any info on that or ebay. It's a P37. It's a dread. Looks pretty cheap judging by the ornamentation. It's painted black with decal inlays and all that classy stuff. I haven't measured it but the fretboard is really wide, the neck is really skinny and D shaped. I think it has a shorter scale length too... and the finish looks thin. It seems old because the saddle barely pokes out and the action is still rather high but then the soundboard doesn't belly out. The bridge is raised all around the saddle though, so it could just be a strange bridge setup. It is rather loud. It says "quality handcrafted guitars" under the company name in the soundhole, not sure if I believe it, but the totally different neck, action and volume level than what I'm used to, makes it pretty fun to play.
Clean or replace jacks. To clean jacks use solvents such as contact cleaner or other solvents as a spray and spray the metal parts, clean any excess solvent with a rag. To replace jacks first obtain a similar one that complies with your guitar, then soldering in properly. Work in well-ventilated space to avoid harmful fumes from solder or solvents.
Derived from standard EADGBE, all the strings are tuned lower by the same interval, thus providing the same chord positions transposed to a lower key. Lower tunings are popular among rock and heavy metal bands. The reason for tuning down below standard pitch is usually either to accommodate a singer's vocal range or to get a deeper/heavier sound.
The Fender Super-Champ X2 HD is a true champion when it comes to versatility and quality, combining old school tube technology with modern amp voicing and digital effects, all in a compact and portable 15W amplifier head. With a single 12AX7 preamp tube and two 6V6 power amp tubes, you can't lump this amp with conventional amp modelers, but you also can't group it with traditional tube amps because it does let you choose from 16 amp voicings that cover everything from clean Tweed tones to high-gain metal. In addition, the amp comes with 15 effects that include variations of reverb, tremolo, modulation and delay. With its low watt rating, the Super-Champ X2 HD is ideal for practice and recording, while being loud and portable enough for small venue gigs. Finally all these features are made available in a compact and more importantly - affordable package.
Fender Montara acoustic electric with HSC. Part of the California series made in the early 90's. BEAUTIFUL guitar! See pics. I would describe it as being in excellent condition for its age. Of course there are some minor signs of use upon very close inspection but nothing that jumps out. (2 small dings are shown in pics) All electronics work, could probably use some new strings. If you have any questions please ask!
“The tone thing is amazing because you can have one rig, have three different guitar players, and each guy can play the same exact thing and it’s going to sound different,” says L.A. Guns guitarist Stacey Blades. “It’s all in the hands.” Waara from Line 6 agrees. “Any guitar player will tell you, at the end of the day, it’s in your hands and you will sound like you will sound,” he says. The percentage of influence the hands wield is shockingly high.
Good looks and playability seem to be the two biggest selling points of the Ibanez AEG10II. Many describe it as a fun instrument, thanks to its comfortably thin profile body and fast action setup. A good portion of its positive reviews are from users who after gigging with the guitar, have great things to say about its reliability and amplified sound.
You don’t have a single Guild in your list, but you have Washburns that totally lack any sort of bass response. In fact, I’ve never understood how Washburn could take perfectly good materials like sitka spruce and mahogany, and produce such inferior guitars. You list the Fender fa-100 and stratacoustic, both firewood as far as I’m concerned, but don’t list the outstanding Alvarez AD60 and AD70, two amazing sounding guitars for the money. The Hohner and Oscar Schmidt OG2 are beginner guitars, but I know a lot of people with Yamaha FG800 and FG830 guitars who would be very offended by you saying one of their favorite guitars is for beginners. They are serious instruments, even if they only carry a sub-$300 price tag. They are certainly better sounding than that Taylor Big Baby thing, which I was shocked to hear at GC. Talk about over-rated. But you did get many things right. You gave the Blueridge d160 high marks, though I think the D140 should have been up there, too. Good to see that you gave the FG800 such high marks, but I actually like the FS800 a little better. It’s easier to play and better for fingerpicking. The Ami, Jim Dandy, and Recording King are all over-rated and over-priced. You need to take the Washburns down and put up the Guild M-120, D-120, and D-150. The D-150 may be the best guitar you can buy for under a grand.
The world is full of guys who will zero in on all the details they find inferior about this guitar by noting the rather obvious fact that this is not a Gibson Les Paul Standard costing $3,000.00. There are some people who will complain that this guitar has a bolt on neck. True, the set necks of the more expensive Epiphones and Gibsons are nicer. But, considering the fact that every Fender Stratocaster ever made had a bolt on neck, is this really a big deal? Would Jimi Hendrix have played "Purple Haze" better if his Strat had a set in neck? Probably not.
This list is insanely bad! First of all, John Mayer is only as good as your typical high school amateur. And before anyone starts spouting off, I’ve tried to find some obscure videos of him to prove myself wrong. But I can’t, it’s all Minor Pentatonic stuff with nothing innovative added to it. Secondly, how about some finger pickers on the list: Doyle Dykes, Scotty Anderson, Chet Atkins, Merle Travis, Tommy Emmanuel. Let’s not forget DANNY GATTON the greatest guitar player you’ve never heard. Also, if we’re talking about the best of the best, BRENT MASON should ALWAYS be in a Top Ten list, although he never is. But, you’ve heard him on all sorts of Nashville recordings. Acoustic guitar players like Andy McKee, Ewan Dobson, Don Ross, (I wish I knew more than that but I only recently discovered their Chuck Norris like awesomeness). Never limit yourself to the mainstream! There are many guitar players that are mentioned only because they are famous and have influence because of that. They may come up with a catchy riff or played in a well known band. But, that doesn’t make them a truly great guitar player.
The body and neck are also slimmer than other Spanish guitar models, as well, so if you’re used to a steel-string, but gearing up to try a classical guitar, the Kremona Sofia is one to put on your list to try. The strings are Royal Classic Sonata strings, made in Spain, so add this to the guitar body’s manufacturing origins, and you will have a sound that is worthy of a professional, but affordable for just about everyone.
zircon wrote:Is there any particular reason you're opposed to Kontakt libraries? All of the plugins you mentioned are sample-based themselves, with the notable weakness that you would not be able to change the mapping, grouping, programming (etc), unlike with Kontakt. As someone who uses a lot of virtual instruments, I'd say it's always preferable to have a sample-based instrument in an open sampler plugin since you can see what's going on under the hood and change things like envelopes as needed.
Most metal guitarists would kill to have half of the power and precision of James Hetfield’s right hand, not to mention his ability to write the most devastating riffs known to mankind, from “Seek and Destroy” and “Creeping Death” to “Enter Sandman.” Of course, most musicians with skills comparable to Hetfield’s have such big egos that they become the targets of our murderous intentions. That’s not the case with Hetfield.
Nice ible. I JUST got a Squier Tele Custom ii (2) in the mail Friday after selling a keytar on ebay for $355. I bought it because it got great reviews for having 2 Duncan (designed, made in asia?) P90's and the price was right for a 1st guitar. the only thing i do not like is the ugly tele headstock. I bought a '68 Harmony Marquis last year for my 1st 1st guitar, not really knowing at the time how unrewarding/difficult it would be to learn on a P.O.S like that. So, even tho the pups are probably the last thing I would replace on it, it was cool to read a bit by someone else with a "less expensive" tele. Look up the Custom ii online, it has a great looking pickguard and the pup selector is up on the top horn like a les paul. Thanks for the tips!
What started as an aftermarket parts company has grown into a real giant. ESP is a brand that is currently building some of the best guitars in the mid range segment of the market. Even though they are often associated with metal scene, ESP offers a wide variety of models. In all honesty, you will rarely find the same bang for the buck that ESP is capable of delivering. On top of that, their guitars are good looking as well.
Amps. When I first plug into an unfamiliar amp, I’ll start by setting all the tone controls to noon, and slowly raise the volume to a comfortable level. If the amp has a master volume, I set it for a good listening level and sweep the gain knob to explore the amp’s overdrive capabilities. I then make small tone tweaks by sweeping each pot up and down and listen to the range they work in, and how they affect the sound from different points in front of the amp.
This model stands out from the rest due to its modified Explorer body shape. It’s one of the more affordable guitars with such an exotic design. However, it not only looks good but it also sounds good as well. There’s enough juice in those pups to make any amp scream. Explorers aren’t really my thing, but I can’t say that Jackson JS32T Kelly was bad when I played it. On the contrary, it’s actually quite good.
The Gibson L5, an acoustic archtop guitar which was first produced in 1923, was an early “jazz”-style guitar which was used by early jazz guitarists such as Eddie Lang. By the 1930s, the guitar began to displace the banjo as the primary chordal rhythm instrument in jazz music, because the guitar could be used to voice chords of greater harmonic complexity, and it had a somewhat more muted tone that blended well with the upright bass, which, by this time, had almost completely replaced the tuba as the dominant bass instrument in jazz music.
The two new Fender-style solidbody basses were the Precisely and Naked. The double-cutaway Precisely U1971 had a single pickup under a chrome cover, covered bridge/tailpiece assembly, Fender-style four-in-line head, dot-inlaid rosewood fingerboard, black-white-black pickguard with fingerrest, volume and tone. The Precisely had an outlined logo decal and a sunburst finish. The Naked U1971N was the same thing, natural-finished. Both cost $250.
The two ’71 piggyback bass amps included the 1060 Bass Amplifier System ($530), featuring seven tubes, 105 watts, two channels, four inputs, volume, bass, middle and treble controls on each channel, presence, variable impedance, and a cabinet with one Univox 15″ speaker with 22-ounce dual diameter Alnico magnet and 2″ voice coil, plus a fully loaded reflex cabinet with true folded horn principle (you ampheads may know what the heck that means!). The grille had two large square cutouts with rounded corners. The 1245 Bass Amplifier System ($385) offered five tubes, 60 watts, two channels with the same controls as the 1060, and two 12″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coil.
An electric guitar with 6 strings, dark blue metallic in color without case. It is has its body made of rosewood and its neck from the maple. The fret boartd is made from rosewood and has dimension of about 106.7 x 52.6 x 12.4 cm. The guitar goes for about INR 13,990 depending on prevalent market factors. you can get more information by clicking on the following link:
I have many acoustic guitars in the collection including Gibson, Taylor, Fender and Washburn. That said none of these guitars come close to the richness in sound of a Maton. I'm assuming this is due to the quality of the Australian timbers and workmanship. Although a little expensive I highly recommend you at least play one in a shop as a treat and hope a dead relative leaves you some money to give you an opportunity of taking one home.
If you were a fan of almost any kind of contemporary popular music when you were growing up, there was probably a time when you thought that it might be cool to learn how to play guitar. Whether you admired the road-going, globetrotting, fly by night lifestyle of rock stars or you just thought it might be a good way to pick up chicks, there’s something viscerally desirable about garnering even a modicum of instrumental mastery. And that very well might have something to do with the allure of the instrument itself.
Chorus is a great way to thicken up the sound of a bass (especially in a 3-piece band), rhythm guitar, or solo guitar. It is often used with distorted sounds but is a fantastic way to create full-sounding clean sounds as well. Stereo output (from two separate speakers) enhances chorus a great deal. Many acoustic guitar amps include a clean-sounding chorus effect adding depth and character to the amplified signal. Chorus pedals can be very helpful in fattening up the tone of acoustic-electric guitars whose piezo pickups tend to sound a little thin.
The Salamander Grand (Yamaha C5) has by nature so many velocity samples that it already has a great expressive sound. I have normalised the samples and re-attenuated them to suit sf2 format and simplified it by leaving out some pedal noises and other non-critical sounds. Cut-off frequencies have been adjusted for extra expression and using Wavosaur I have removed the gaps at the front of the samples to greatly reduce latency.
Thanks to these affordable guitar kits, you can now build your own guitar without having to craft body parts from wooden tables and planks. Unlike Brian May and his dad, who built the iconic "Red Special" guitar from wooden tables and planks - all you have to do is order a guitar kit online, and you are free to assemble and customize as you prefer. These guitar kits reduce the skill and cost requirements of guitar building considerably, making for great entry points into lutherie and guitar modification.
Before taking the plunge, make sure that you have the necessary tools to build the guitar of your dreams. Most kits will require you to have screwdrivers, pliers and soldering iron for the assembly process. While others require more, like wood glue, bandsaw and other wood routing tools. Once you've decided on the finish, you'll also have to get finishing tools like sandpaper, wood sealant, primer, paint and more. It is also recommended to have a dedicated room or space for you to work on, a nice working table would also make work a bit more easier.
Another point to remember about ’65 Teisco Del Rey guitars. While, in reality, Japanese Teiscos were never too particular about consistency in headstock design, they at least tended to show consistency in the catalogs. The American Teisco Del Reys were even more varied, and the ’65 Teisco Del Rey catalog shows a mix of the Bizarro square Strat head (the most predominant), the new ’64 hooked design, and the older elongated Strat design. This is probably explained by the vicissitudes of stockpiles and shipping to the new American market. In any case, it makes it a bit harder to date these instruments.
Some Craigslist and EBay sellers have been claiming the 500 and 600-series Kents are made by Teisco. I think we’ve shown that that’s not the case. Some sellers also describe those early Kents as having “Ry Cooder” pickups. As most of you know, Ry Cooder is an incredibly talented multi-stringed-instrument musician. David Lindley, another great talent, gave him a pickup from an old Teisco guitar. The photo at left is exactly like it. Cooder put the pickup into one of his Stratocasters and liked the sound so much that he got another one and put it into another Strat. These pickups are also described as “gold foil” pickups. There are variations in the pattern of cut-outs on the chrome covers of different pickups. I don’t know if the others sound any different, but if I were looking for a “Ry Cooder Pickup”, something like the one pictured here is what I would be looking for. The pickups have become worth more than the guitars they are on, consequently, as the guitars are bought up and trashed for their pickups, their prices are going to rise.
We're just over the £300 price tag here, but for the shredders and jazz fans out there, the Schecter C-6 Plus in Electric Magenta is a great option, whether you’re a beginner or pro player. It’s one of our favourite cheap electric guitars, and one hell of a performer, featuring professional level appointments inspired by Schecter's Diamond Series guitars – this is a monster of tone, and well worth the extra investment.
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.
Many of the modulation type effects pedals are made to approximate some aspect of the original rotating speaker. That’s correct, you heard right. The Leslie Cabinet was made as a companion to the Hammond B3 Organ and literally had a rotary speaker that could produce all of the common modulation effects depending on the speed setting. Many companies now offer digital pedal versions that mimic the Leslie sound very well, so lugging around a huge speaker cabinet isn’t necessary, unless you are a purist or have a crew of roadies available.
CALIFORNIA CLASSIC models feature superb playability, distinctive looks and an unmistakable Fender vibe. The fully-painted solid Sitka spruce top and natural solid mahogany back and sides, as well as a matching painted 6-in-line headstock and koa binding and rosette, give them an elegant two-toned aesthetic that was made for the stage. California Special and California Classic acoustic guitars are equipped with a Fender- and Fishman-designed PM preamp specifically tuned to complement the unique shape and voice of each instrument—complete with tuner, frequency and phase controls.
got my dad's guitar after he passed away. its electric solid wood has a tone knob and volume knob next to the cord plug in and two little black slider buttons. I don't know anything about guitars but it only has one marker on the back its on the silver plate and it just says Japan in all caps. there is no brand name on the headstock or anywhere else on the guitar that I can find and I've looked at over many times.
When Jimi Hendrix came on the scene in the late 1960s, he was like nothing anyone had ever seen before. His ability to use volume, feedback, wah pedals, and other sonic devices to their maximum effect was awe-inspiring. Eric ‘God’ Clapton saw Hendrix for the first time and thought he would be the end to his career. There may be more technically impressive guitar players, but it’s hard to find anyone who played with more adventure or spirit than James Marshall Hendrix.
Simon Stockhausen began his stellar musical career at the age of five. His multi-faceted and wide-ranging oeuvre has since embraced all manner of projects and styles, including jazz and improvisational collaborations, countless compositions for ensembles and chamber groups as well as work for major European theatre companies and orchestras including the Hamburg and Berlin Philharmonic Orchestras. In 2009 he further extended the range of his musical endeavors with the creation of a sound design company through which he produces sounds, patches and libraries for software synths and plug-ins, serving sound designers, musicians and post production professionals.
Washburn Guitars have a history built by skilled luthiers and musicians who share a passion for guitar. There are plenty of new modern and traditional designs, like the Washburn Parallaxe Series which has futuristic and modern voicing, great for metal genres. The Washburn Jazz Series has mellow tones and more traditional construction and playability. View all information
The most musically satisfying types of distortion tend to be progressive, where the audio waveform becomes more 'squashed' as the level increases. Hard clipping, by contrast, tends to sound harsh. All these types of distortion introduce additional harmonics into the signal, but it is the level and proportion of the added harmonics that creates the character of the sound. Harmonically related distortion can be added at much higher levels than non-harmonically related distortion before the human hearing system recognises it as such, so there is no way to define a percentage of distortion below which audio is acceptable or above which it is unacceptable. The reason that digital distortion has its own character, which most people find less musically pleasant, is because it is not usually harmonically related to the input signal. For example, quantisation distortion, which results from sampling at too low a bit depth, sounds quite ugly, though many dance and industrial music producers have found a use for it, and some plug-ins deliberately introduce it.
Hmm… you still want to buy an electric guitar first up? Okay, but again spend extra money on a guitar that plays well, will keep its value and feels perfect in your hands. In other words, don’t focus too much on paying for extras like custom pick-ups, locking nuts and electronics you don’t need just yet. At the moment it’s all about fingers and hands, not foot-pedals.
I have inherited a heater "H300N" acoustic guitar but I can't find any info on it. The most I could find is that it was from the L. D. Heater Music Company that was based out of Beaverton, Oregon. They were best known for being a distributer of Lyle Guitars. Can anyone else offer additional information or where to find it? It's a bueatiful guitar and I want to know more info before I give it to my nephew or sell it.
Gruhn Guitars: If you're looking for a convenient appraisal that can be done online--something along the lines of what May Music Studio used to do--Gruhn Guitars offers an appraisal service. You must first send information and pictures of your guitar according to their guidelines. You must also include a payment for the appraisal fee, which varies depending on the instrument.
Since we have already covered amp modeling software, this time we will focus on software that provides quality guitar effects. These popular software effects applications will get you as close as technologically possible to your favorite stomp box and rack mount effects - minus the bulk, weight and the hassle. Note that certain packages excel in specific effect types, so do check out your favorite effect types via the demos before you decide on which is your top pick. We have included both paid and free guitar effects software for you to sink your teeth, and mouse, into.
Of course, this top-down lecturing is all very abstract without examples. Let me give you the worst case scenario. My school talent show, 2008. Two friends of mine performED an ambitious but utterly inappropriate Metallica cover in front of the other students, their parents and the faculty. It was excruciating. Although the solos (presumably the only thing they had bothered to practice) were technically flawless, the whole song was undone by their terrible rhythm. The timing of the song became displaced, the chords were so badly fingered that it was difficult to hear the riff and consequently the whole performance fell apart. They looked like morons. They had sacrificed learning basic rhythm and paid the price. Make sure you don’t do the same.
Need Help?Customer Service1email@example.comMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeSun 10am - 8pm Eastern TimeProduct Assistance1firstname.lastname@example.orgMon - Fri 8am - 11pm Eastern TimeSat 9am - 8pm Eastern TimeCredit Department1email@example.comMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern TimePayments1firstname.lastname@example.orgMon - Fri 8am - 8pm Eastern TimeSat 9am - 1pm Eastern Time
Read Full Review This electric guitar offered by Epiphone is absolutely on the budget when it comes to and looking for a markdown price decent sounding Les Paul style electric guitar. The guitar can be bought individually to pair it with an amplifier of choice or as part of the Epiphone Les Paul Special II guitar package that comes complete with a strap, guitar cable, plectrums, gig bag and a small 10 watts Electar amplifier to already begin playing right out of the box.
The EB-28 bass was very similar to the guitar in appointments and controls. It had a 22-fret ebony fingerboard, 33.825″ scale, a DiMarzio P-style neck pickup and a DiMarzio J-style pickup at the bridge. It, too, carried a Schaller bridge and Schaller M-4 tuners. Around 4,854 each of these 28 Series guitars and basses were built between January 1981 and February 1982.
Gibson Les Paul specifications during 1958–60 varied from year to year and also from guitar to guitar. Typical 1958 Les Paul Standard necks had a thicker “club-shaped” neck, thinner frets and lower fret height, which changed during the course of 1959 to develop into typical 1960 necks with a thinner cross-section and wider, higher frets. Les Paul Customs from the same period had totally different frets and were referred to as “The Fretless Wonder”, which were designed for jazz guitarists with thick flat-wound strings.[note 7][note 6]
Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.
The solid body electric guitar is the most common body type and is made from a solid slab of wood. Solid body guitars can range from a simple, single-pickup model, to an ornately figured and decorated, multi-pickup instrument with a slew of electronic options. Although solid-body guitars don’t produce as much resonance as hollow-body models, the woods used still have an impact on the instrument’s sound.
And when you shop with Guitar Center, you can search through our entire chainwide inventory and have any item shipped to your local store for free, or directly to your home. Whether you’re a devoted collector, a player looking to get back that one instrument that got away, or an audiophile trying to capture the true vintage sound you’ve always wanted, the Guitar Center Vintage Collection has everything you need. Start searching today.
The tone knob is similar. Like the volume knob, the more you turn down the knob, the more of the sound you contain instead of sending it through the amplifier. But there is an additional trick involved. See, the current generated from each string is quite complex, like the sound characteristics it produces. Think of it like a continuum. On one end, the current is turned into low frequency sound (which makes the guitar sound 'warm') and on the other end of the continuum, the current generates high frequency sound (which makes the guitar sound 'bright').
Most bass speaker cabinets employ a vented bass-reflex design, which uses a port or vent cut into the cabinet and a length of carefully measured tubing or pipe to increase the low-frequency response and improve the speaker system's efficiency. To give an example, if one compares two bass cabinets, each with the same type and power of power amplifier, one cabinet being a sealed box and the other being a vented or ported cabinet, most listeners will perceive that the ported cabinet produces more bass tone and deeper bass tone. Less commonly, some bass speaker cabinets use one or more passive radiator speakers, a voice coil-less "drone cone" which is used in addition to a regular woofer to improve the low frequency response of a cabinet. Passive radiator speakers help to reduce the risk of overextension. Acoustic suspension designs with sealed cabinets are relatively uncommon because they are less efficient. Some cabinets use a transmission-line design similar to bass-reflex, and in rare cases, some large cabinets use horn-loading of the woofers (e.g., the Acoustic 361 18" speaker cabinet from the late 1960s).
The Ring Resonator Deluxe is like having two all analog pedals in one. It contains the octave-up fuzz effect of the original Ring Resonator with added LED, push-push output pot and mini-toggle switch. With the push-push output pot down, the octave-up effect is removed and fuzz-only is achieved. In the fuzz-only mode of operation the toggle switch allows you to switch between dark fuzz and bright fuzz tones.
Lyndon Laney established his brand in 1967 in Birmingham (England). In those days, he was also playing in a band with a couple of guys you might've heard of: John Bonham and Robert Plant. You might also know Tony Iommi (Black Sabbath) who happened to be one of his first clients. The LA100BL is a must among heavy-metal guitarists, while the KLIPP aims to be more versatile. The AOR (Advanced Overdrive Response) series provides more gain every time, contributing, in part, to the brand's constantly growing reputation. Among Laney addicts, we could mention Ace Frehley of Kiss and Mark Knopfler of Dire Straits.
Unfortunately, not many reference materials are available to document in complete detail, but we can hit some of the highlights, and illuminate a number of relationships along the way. If you have catalogs, ads or pictures of guitars that can help fill in some of the blanks, please let me know (Michael Wright, PO Box 60207, Philadelphia, PA 19102).
Typically, players tend to place their delay and reverb effects within the effects loops of their amplifiers. This placement is especially helpful if you get your overdrive and distortion from your amplifier instead of pedals. Otherwise you would be feeding your delay repeats and reverb ambiance into the overdrive and distortion of your amplifier, which can sound muddy and washed out. You can also place your modulation pedals within the effects loop of your amplifier as well for a different sound.
The EB-28 bass was very similar to the guitar in appointments and controls. It had a 22-fret ebony fingerboard, 33.825″ scale, a DiMarzio P-style neck pickup and a DiMarzio J-style pickup at the bridge. It, too, carried a Schaller bridge and Schaller M-4 tuners. Around 4,854 each of these 28 Series guitars and basses were built between January 1981 and February 1982.
A phaser pedal is similar to a chorus as it thickens up your sound but also adds a sweeping effect – almost as if the speaker within the amplifier is spinning around or moving up and down. If you pretend the speaker is moving away from you and moving closer and back again – you’ll get an idea as to how it sounds. You can change the length of the effect and how quickly the movements are via the pedal.
But that's not the Ibanez we know today, although the two are related.. Japanese company Hoshino Gakki began importing guitars made by Salvador Ibáñez's company to Japan in 1929. This was so successful for them that they started producing their own similar guitars under this name in 1935. They started making modern guitars simply using the name Ibanez in 1957 and then, not being ones to hold a grudge given that the US Army Air Force destroyed their factory in 1945, began exporting them to the USA in 1971, and as they say, the rest is history.
Lastly, if what you're really asking is "Can I play my electric guitar without making any noise that would bother my neighbors/housemates?" Many amps and all direct in setups will allow you play with headphones. I plug headphones in a small tube amp. The sound is quite nice. I find this setup allows me to experiment even more than usual since I am not self conscious about anyone hearing what I am playing. I've seen little tube amps for as little as about $125 that have headphone jacks. At that price don't expect Fender, Dr Z, Vox, Marshall or Mesa Boogie quality sound, but they get the job done of basic tube drive and bypass the loudspeaker by driving the headphones.
As music professionals, we're all familiar with guitarists and the rows of pedals they set up on stage at every gig. They're definitely on to something when it comes to effects on-the-fly, but when you're setting up a studio or pro audio rig, there's a simpler solution: multi effects processors. These full-sized units bring a ton of versatility to the table (or, more accurately speaking, the rack) and they can play a crucial role in shaping your own signature sound.
Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered. A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.
I started to learn how to play guitar about 1.5- 2 years ago. My instruments are on the cheap/ lower cost side. I am disabled with a long life expectancy. I wanted a hobby that I can/ learn to do for the long run. I have five different guitars now ( all on the lower cost side ), They all sound good to my ear. One of them a Squire strat sounded horrible when I purchased it. I pretty much over a little time change just about everything but the wood. The Squire is a very light electric guitar as compared to my Epiphone Les Paul ( which actually strains my disabled spine ). So, It has to sound good to your own ear, and as equally important you have to be able to hold it for a period of time while playing to get the full enjoyment of the skill known as a "guitar player". Enjoy and be Proud. God Bless.
Thinking out loud... what defines electronics then? I've always assumed that the pickups, caps, pots, etc. inside an electric guitar constituted an electronic system. The "guitar's electronics" facilitate a deliberate flow of electrons through a circuit with semi-conductors, etc. Heck, with coils and magnets (and sometimes battery packs), they also provide the electricity that's conducted through the system.
70s Morris D-28 Gorgeous Rosewood body Dreadnaught Acoustic Japanes Vintage BOOMER with Martin Set Up Just in folks get the jump on this being processed now- pictured etc measured and pictured We have already set her up with our Martin Bone Nut & Compensated Saddle se as well as upgraded bridge Pins to solid Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic if not familiar with the Morris brand thats ok many are not, I have know of these for 2 decades now many of these were made in the Terada factory in Japan... another name you may not have heard of none the less they are know to make the highest end guitars in Japan in those days and also today, for makers like Ibanez virtually all of their top end guitars like Musicians - Artists - George benson GB line and the old Aria L-5's and Ibanez L-5's and many others continuing on today in that great Custom Shop tradition. This is one of them and is very well constructed with top workmanship and fit and finish build quality is comparable to a Martin- Taylor_Gibson and so on... that is to say no worries this guitar Morris has an excellent pedigree. Guitars of great playability and great sounding what more do you need?.... This guitar was built from woods aged at least 20 years at time of build that was over 40 years ago and just look at its condition to this day... it has truly stood the test of time. See for yourself... it this price range a wonderful classic Dreadnought style Japanese true Vintage guitar in its own right. Great Value and great fun Japanese vintage collectible. For a song. More info soon .
If you just want one or two instruments from a large SoundFont then follow this procedure. Open the large multi-instrument SoundFont in Polyphone, then select File, New, Name the new SoundFont. Go to the Presets of the original SoundFont, Left-Click the Preset you want and then holding down the Left mouse button then drag it to the Presets of the new SoundFont and let go of the button (the preset is now inside your new SoundFont). Right-Click on the main heading of the original SoundFont and choose Close File. Now simply choose File, Save (or Save As), Close.
Being a PODHD user for many years now, I am but one of the many who commend its balance of versatility and sound quality. Like many reviewers, it allows me to gig and record conveniently, often times plugging straight to PA with great results. I've also seen a number of professionals using PODHD500X's in their concerts, so it's not surprising that even experts at Music Radar were convinced, saying: "The modelling is excellent throughout, with authentic-sounding amps and quality effects".
Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.
Introduced in the late '90s, the PRS SE line was the company's entry into the already tough entry level market competition. With it, one can own a PRS guitar at a much lower price point, with the main difference being the country of origin, which for the case of the SE is Korea. The SE Standard line takes affordability a step further by having the production done in Indonesia, while still maintaining high quality standards.
Even cheaper (abour $40) is the Behringer Guitar Link (review: Behringer Guitar Link UCG102 USB Interface Review). One nice thing is the long cord.. you can sit a ways away from your PC without needing an extender, and like the line 6, it’s also got a headphone output. They offer some guitar effects software as well, via download, and a basic DAW program. Worth checking out, as this does check every basic box for forty bucks. I have not used this, but I have used other Behringer audio interfaces. Cheap, basic, but they do include ASIO drivers (read ahead).
The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies.
G&L, owned by Leo Fender, is yet another brand producing quality guitars. (Of course, when it is owned by the same owner as that of Fender, one can expect the extent of quality of these guitars.) Many of the G&L guitars seem to relive the Fender classic designs with some improvisations in style. Thus, this brand can indeed be considered an excellent alternative to Fender. Instead, in many instances, you will find G&L outnumbering Fender.
Clean or replace switches. To clean switches use solvent such as contact cleaner in a spray into the toggle itself, you may also use other solvents such as WD-40, always work the solvent around by using the switch as indented. To replace switches first obtain a proper switch that applies with your guitar, then soldering in accordingly. Work in a well-ventilated space to avoid harmful fumes from solder or solvents.
It is possible to perform a setup at home, but it can easily become a laborious and time-consuming process. You can instead bring your instrument to a local store or other professional. Guitar setup cost is usually a large value in comparison to the work it would take to do the job at home. You should consider that the cost of a guitar setup includes the addition of new strings but may not cover the actual cost of them. Whether or not strings are included in the price is something that should be investigated prior to having an instrument professionally setup. Guitar setup cost may also increase if the tuning keys need adjustment, or if you have a complicated bridge system (like a Floyd Rose) that requires extra knowledge and skill to be properly fine-tuned.
The problem that had led to Martin and the idea of making guitars in the first place also led Kaman to the idea of using synthetic materials in guitars. He realized he could use a composite fiberglass to “improve” two aspects of guitar construction. He could solve the problem of cracking due to wood shrinkage caused by changes in heat and humidity, and he could improve vibration transmission from the back because fiberglass actually resonates at frequencies similar to many woods, but is more efficient (wood actually absorbs some of the instrument’s vibrations).
Dick Dale: Nicknamed “The Beast” by Dale himself, the guitar comes in “chartreuse sparkle” (a greenish-gold color) with a white pickguard and rosewood fretboard, with vintage 50s features and a number of custom modifications. Notably, the guitar comes with a reverse headstock and a reverse angled bridge pickup to achieve the sound of playing a Stratocaster upside-down, which was how Dale learned to play.
Muddy Waters is obviously one of the most recognized and influential blues artists of this century. When his name is mentioned phrases like "slide guitar" and "electric Chicago blues" are associated with it, but what about "wah-wah" and "psychedelic"? For a small period in history, Muddy Waters' image became one of a psychedelic icon and if there weren't records still around from then, most people would doubt it had ever happened. The sixties were a strange time for music and musicians- none felt stranger than musicians from the previous decade trying to stay afloat then. Many times in music, established artists will try to expand upon their work and take a chance with something different. They should at least be praised and encouraged when they try to experiment with their sound. If music were condemned to always following a strict guideline of rules, it would be pretty boring. Music should be allowed to grow and explore new territories because everyone can agree that it's not exciting if it's always predictable.
Nickelback singer/guitarist Chad Kroeger collaborated with Gibson to create a signature Les Paul. The guitar, called the Blackwater Les Paul, features a mahogany body and neck, a Trans Black finish on a AAA flamed maple top, Gibson 490R/498T pickups, a GraphTech Ghost piezo bridge, Grover kidney tuners, acrylic trapezoid inlays, and painted white stars corresponding with the fingerboard inlays.
FYI, Dave might be backed up due to demand if he is still working, so I'd call those places up and ask them in advance. Twin Town isn't too bad a drive if you've got a car, maybe 15 minutes from Bloomington, but the place up in Fridley is about a 20-25 minute drive. They might be the best at working on short notice though as they're a smaller place. Definitely give them all calls.
It is typically not possible to combine high efficiency (especially at low frequencies) with compact enclosure size and adequate low frequency response. Bass cabinet designers can, for the most part, choose only two of the three parameters when designing a speaker system. So, for example, if extended low-frequency performance and small cabinet size are important, one must accept low efficiency. This rule of thumb is sometimes called Hofmann's Iron Law (after J.A. Hofmann, the "H" in KLH). Bass cabinet designers must work within these trade-offs. In general, to get extended low-frequency performance, a larger cabinet size is needed. Most bass cabinets are made from wood such as plywood. Gallien-Kruger makes a small extension cab made of aluminum.
Hi-Gain (descended from the more generic electric guitar amplification term high-gain) is the sound most used in heavy metal. High gain in normal electric guitar playing simply references a thick sound produced by heavily overdriven amplifier tubes, a distortion pedal, or some combination of both--the essential component is the typically loud, thick, harmonically rich, and sustaining quality of the tone. However, the Hi-Gain sound of modern pedals is somewhat distinct from, although descended from, this sound. The distortion often produces sounds not possible any other way. Many extreme distortions are either hi-gain or the descendents of such. The Mesa Boogie Triple Rectifier Series of amps are an example.
One reason that some bass players choose to use a "bass stack" rather than a combo is that the separate component approach enables bassists to use different speaker cabinets for different shows or activities. For example, a bassist playing a stadium may use an 8x10" cab for this show, but then bring a 4x10" cab for a nightclub show the next day, or a 1x12" cab for a studio recording.
SOLD OUT Here we have a great 45 Year old Japanese Vintage 1971 Yamaha FG180 Red Label Nippon Gakki Martin like vintage tone for a fraction shes a Boomer low action plays easily WoW! ... Just in and AVAILABLE JVG- Fresh Release: I can tell you this is a real good one folks! No structural cracks or checking in finish, its a beautiful Solid Spruce Top and it is pretty flat with no noticeable bellying and its bridge is tight, action is excellent within Martin specs... This guitar received the JVGuitars SET -UP upgrade to bone nut and compensated martin saddle as well as the brifg pins upgraded to very nice Rosewood with abalone dot detail as well as a new set of Martin Marquis strings ( 12’s ) 80/20 Phosphorus bronze . The neck has a classic feel to it with an excellent vintage finish still shines like glass …excellent with a classic Martin like feel in a soft V Medium Profile and has the correct relief set to within M spec frets are still good - we leveled and dress them. We first took off the old strings and fully clean the fingerboard and re-hydrate the woods before polishing all surfaces and lubricating the excellent upgraded Ping Deluxe tuners, Not to be confused with the similar model made in Taiwan this the famous Nippon Gakki made in Japan one and this is a really good one at that folks. Never abused, well cared for, no cracks, great neck alignment to this day, action excellent, plastic tone robbing parts - GONE! Bone & Rosewood sustains better than ever…. these are know for great “ M” Like vintage tone and is in great vintage condition, Someone is going to be very pleased. For a Song Any questions or to contact Joe to buy this contact Joe at: email@example.com Thank you for your interest Joe ..
Most modern effects use solid-state electronics or computer chips. Some effects, particularly older ones such as Leslie speakers and spring reverbs, use mechanical components or vacuum tubes. Effects are often used as stompboxes, which are typically placed on the floor and controlled with footswitches. They are also built into amplifiers, tabletop units designed for DJs and record producers, and rackmounts, and are widely used as software VSTs.
Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
The original Fender Mustang is something of a cult classic. It was loved by alternative bands and players - including Kurt Cobain - in the '90s for its short scale, affordability and potential for modding. The Bullet Mustang is the most affordable version of the model yet. In keeping with Squier’s other entry-level models, it features a basswood body, which gives it an incredibly lithe, lightweight feel. This, combined with its 24-inch scale length, makes it a great choice for beginners. The two humbuckers are the most obvious departure from the original, providing angular grit in the bridge position and a pleasing, earthy warmth in the neck. The bolt-on maple neck and six saddle hardtail bridge feel reassuringly rigid, while the tuners did a sterling job in our tests of holding their pitch without too much hassle. The volume and tone knobs, often a clear indicator of quality control in budget guitars, are installed firmly enough with no evident wobble, while the pickup selector switch is angled so it won’t get knocked if your playing becomes too... ahem... enthusiastic. Meanwhile, the 12-inch radius, rosewood ’board is pancake flat and makes string bends simple for even the most sausage-fingered player. The C profile neck is also extremely comfortable to hold, while the satin finish makes fretboard-spanning licks a doddle. $149/£120 is practically peanuts to spend on a new guitar. For Squier to cram in the features it has, with the overall levels of build quality on display, is seriously impressive.
It comes with two 6.5-inch speakers, delving out 100 W each for a total of 200. Now, the small woofer diameter might make these units work less-than-perfect for rendering stomach-churning bass noise, but ZT Amplifiers never intended for them to be used as such. Instead, they are supposed to deliver loud and clear enough sounds in the treble and mid ranges to make the guitarist hold its own even when a loud drummer is present.
One of the first solid-body guitars was invented by Les Paul. Gibson did not present their Gibson Les Paul guitar prototypes to the public, as they did not believe the solid-body style would catch on. Another early solid-body Spanish style guitar, resembling what would become Gibson's Les Paul guitar a decade later, was developed in 1941 by O.W. Appleton, of Nogales, Arizona. Appleton made contact with both Gibson and Fender but was unable to sell the idea behind his "App" guitar to either company. In 1946, Merle Travis commissioned steel guitar builder Paul Bigsby to build him a solid-body Spanish-style electric. Bigsby delivered the guitar in 1948. The first mass-produced solid-body guitar was Fender Esquire and Fender Broadcaster (later to become the Fender Telecaster), first made in 1948, five years after Les Paul made his prototype. The Gibson Les Paul appeared soon after to compete with the Broadcaster. Another notable solid-body design is the Fender Stratocaster, which was introduced in 1954 and became extremely popular among musicians in the 1960s and 1970s for its wide tonal capabilities and more comfortable ergonomics than other models.