There’s a huge range of cheap electric guitars out there that would not look out of place on the stages of the world thanks to high quality manufacturing and the brands actually caring about their products – “cheap” does not always mean poor quality and plenty of guitars out there will give you a fantastic playing experience for many years without breaking the bank.

Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green


The modern era of Ibanez guitars began in 1957 [3] and the late 1950s and 1960s Ibanez catalogues [1] show guitars with some wild looking designs [2]. Japanese guitar makers in the 1960s were mostly copying European guitar designs and some of the late 1960s Ibanez designs were similar to Hagström and Eko guitar designs. Hoshino Gakki used the Teisco and FujiGen Gakki guitar factories to manufacture Ibanez guitars after they stopped manufacturing their own guitars in 1966 and after the Teisco guitar factory closed down in 1969/1970 Hoshino Gakki used the FujiGen Gakki guitar factory to make most Ibanez guitars.
Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.
It features an all-mahogany body with a narrower depth that makes it easier to carry around and to play with. The downside being is lack of low end and projection - which can also be a good thing if you prefer acoustic tones with more midrange. Giving this guitar its amplified voice is a Fishman Sonicore pickup, which is paired to an AEQ-SP1 Preamp that also comes with a tuner. And since Ibanez is not one to skimp on aesthetic features, you get a really good looking instrument with distinct fretboard inlays, bindings and more.

Solid-state amplifiers incorporating transistors and/or op amps can be made to produce hard clipping. When symmetrical, this adds additional high-amplitude odd harmonics, creating a "dirty" or "gritty" tone.[37] When asymmetrical, it produces both even and odd harmonics. Electronically, this is usually achieved by either amplifying the signal to a point where it is clipped by the DC voltage limitation of the power supply rail, or by clipping the signal with diodes.[citation needed] Many solid-state distortion devices attempt to emulate the sound of overdriven vacuum valves using additional solid-state circuitry. Some amplifiers (notably the Marshall JCM 900) utilize hybrid designs that employ both valve and solid-state components.[citation needed]


Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
1946 to present: Sitka spruce (darker than Adirondack). The change to Sitka happened on the larger "D" models first (in very early 1946). It took Martin a little while to use up all the smaller pieces of older Adirondack red spruce, hence the change to Sitka happend slower on the smaller body models. This is also the reason multiple piece Adi red spruce tops are sometimes seen on 0,00,000 bodies in 1946.
For visual clarity, I’ve indicated ground connections with a down-facing triangle. As you probably know, all ground wires must be electronically connected to each other. (One convenient method is to solder all pickup ground wires, the output jack ground, the pickup selector ground, and the bridge’s ground wire to the back of the volume pot, and then run a jumper wire to ground the treble control. In conventional wiring, all pots must be grounded, but here, it’s not necessary to ground the bass pot.)

Clarence White helped shape two genres: His acoustic flatpicking, first displayed as a teenager when he and his brother formed the Kentucky Colonels band, was key in making the guitar a lead instrument in bluegrass. Later, he set the stage for country rock and transferred that dynamic precision and melodic symmetry to the electric guitar. A top session man in the Sixties, he played on the Byrds' 1968 landmark, Sweetheart of the Rodeo. After he joined the band later that year, White brought a full-bodied rock elation to his California-inflected Nashville chops. "He never played anything that sounded vaguely weak," said the Byrds' leader, Roger McGuinn. "He was always driving… into the music." White had returned to bluegrass with the acclaimed Muleskinner album when he was killed by a drunk driver in 1973. He was 29. "Clarence was immersed in hard country and bluegrass," said Dan Auerbach of the Black Keys. "He incorporated those elements into rock & roll, and it totally blew people's minds."

Capacitors are typically used as filters to control tone. In most cases, they are used to filter out very high frequencies before being sent to ground (the output jack) which controls the warmth of your guitar’s tone. Capacitors vary greatly and come in a range of materials from ceramic, film, paper and electrolytic (mainly used with active pickups).

After you've made your selections from the best selection of guitar and bass tabs, you'll want to download the Musicnotes.com apps for your Android, iPad, iPhone, or other device to gain access to your digital library anywhere. The option to print the file is still available, and you will also have all of your sheet music stored in your personal account to access your digital file from any computer or mobile device. If any issues arise, make sure to contact our customer support of musicians, ready to help fellow musicians.
Pickups are complex devices. No matter what we do, we cannot model them with spot-on accuracy. They do have a series resistance (R6), but the L1 and C3 inductor and capacitance, respectively, but these are not real circuit components, but are a simple model placeholder for the complicated interactions that appear due to Maxwell’s equations, when we have a wire wound around magnets (see below image):
It was also in January of ’64 that the Westheimer Sales Company, 1414 South Wabash Avenue, Chicago, began advertising its New Kingston, the “S” line of quality guitars. These double-cutaway guitars included the #S-1 single pickup, #S-2 double pickup, #S-3 three pickup, the #S-2T double with tremolo, and #S-3T with tremolo. These were most likely versions of the little MJ and WG guitars.
One day I want to own a Martin IN ADDITION to my Gibson.. but having tried both a lot.. the D-18, the D-28... I went with the J-45. The J-45 is special in that it has slim shoulders - you won't get an enormous boom out of it when un-amplified. But the sustain is super fine, and as accompaniment to the singer and as a tool for the songwriter, it is rock solid and it gives, gives, gives, then gives some more. Plus, it's sexy as hell - every boy might think he longs for a Martin, but every girl goes home with the guy with the Gibson.
DESIGN AND PLANNING It is best to pre-plan your design concept so you can correct any mistakes on paper before you get to the wood and can't go back. Sketch out some design concepts on paper then, once you have decided on something,lay out a couple of pieces of poster board to draw the body shape out on. You can let you imagination go wild or if you perfer stay with a more traditional design. For this particular guitar I built, I chose to go with a PRS style body design. To get the measurment correct, I pulled a picture of the guitar I was modeling it after from a guitar catalog that was taken straight on and not from the side. I then scaled up the guitar by marking out a grid on the picture and transposed it to some poster board that I had drew a larger grid on. I knew that the pickup rings measured 3 1/2" by 1 1/2" and thats what I used to scale the picture up and get the proportions correct. Another method is to project the image on a wall and trace it to the poster board if you happen to have a projector but I like to draw my template out freehand. You don't have to use this method for the design if you want to come up with you own unique style. Just make sure that take all the parts that will go on to your guitar into consideration first like the neck postition, pick ups and knobs.
There are two distinct kinds of transistors used in fuzz pedals, germanium and silicon. In the early 1960’s silicon transistors were fairly new and very expensive and germanium was the norm. Germanium transistors are susceptible to temperature changes and noise so they can be unreliable at times. They do have a very distinct tone, they also react very well to the guitar’s volume knob by cleaning up very well. As silicon transistors became less expensive they largely replaced their germanium counterparts in pedals due to their stability. The Silicon fuzzes generally produce more gain but often don’t clean up as well.
You're headed in the right direction - don't stop! yes, the keyboardist should control vibrato directly with the fingers, not automatically with an LFO. The more you rely on the technology to play the music for you, the worse your results will be in the long run. Is your intention to emulate a guitar, or to achieve a similar kind of lead expression and sound control during playing? Because these two are very different.
By 1970, however, market conditions were changing rapidly. Japanese manufacturers had greatly improved their quality as well as their range of product offerings. Japanese labor at the time was much cheaper than American, and the imported guitars offered more "bang for the buck" than American ones. In a relatively short time, brands such as Yamaha and Ibanez were outselling Harmonies and Kays. The Japanese guitars had more comfortable neck contours and had truss rods that actually worked. The Japanese rapidly improved the quality of their instruments as well as the variety of their offerings such that by the mid 1970s, Harmony, Kay and Danelectro had all ceased operations, and Martin, Fender and Gibson had eliminated most of the low-end student models from their lines to concentrate on a price range well above any of the Japanese imports. I went to Japan in 1974 and attended a music trade show there as well as visited numerous factories and music stores. I was absolutely astonished at the variety of offerings available. Whereas in 1970 most Japanese guitars were low-end student models which often copied currently available new American products, by 1974 the more progressive Japanese manufacturers were well aware that many vintage American instruments were far superior to the new ones of that time. As a result some of these Japanese manufacturers stared to concentrate on studying vintage American originals. Fuji Gen Gakki and Tokai started producing extremely detailed copies of old Les Pauls, Stratocasters, Mastertone banjos and other vintage American acoustic and electric guitars and mandolins.
A diagram showing the wiring of a Gibson Les Paul electric guitar. Shown are the humbucker pickups with individual tone and volume controls (T and V, respectively), 3-way pickup selector switch, tone capacitors that form a passive low-pass filter, the output jack and connections between those components. The top right shows a modification that allows both pickups to have their volumes adjusted independently when the selector switch is in the middle position: the two bottom connections are simply swapped on each volume potentiometer.
Based out of Scottsdale, Arizona, Fender offers a few levels of quality of guitar, depending on where they’re made. Their high-end models are all made in the United States — as is designated on the headstock — while their less expensive models are made in Mexico. Most Fender guitars feature single coil pick-ups, lending to a very distinct bluesy sound with more twang and less punch than a humbucking guitar.
The Wave is a versatile stand-alone, tube driven analog spring reverb unit kit. It can be used in front of your guitar amp or as a line-level analog reverb effect for the recording studio. Two controls allow you to serve up a wide range of wetness from just a touch to over the top psychedelia. The "dwell" control adjusts the input signal level driving the tank and the "reverb" control adjusts the level of output reverberations from the tank.
There's more to being a musician than what you do on the stage: while that's the perfect place to turn it up loud with a standard guitar amplifier, sometimes you don't want anybody but yourself to be listening in on the tunes. That's when headphone guitar amps come in handy. There's a solid variety of these little amps to choose from, so you can get yours with as few or as many features as you like. Then, all you need is your favorite set of 'phones and you're ready to rock.

We saved the most affordable amplifier for the last. This Donner electric guitar amp might have only 10-watts, but it does not lack other features. The controls include Gain, boost Select Switch, Volume, Treble, Middle, Bass and are pretty intuitive. The tone is clean and damn big for such a small model. Other than that this model also has 3-Band EQ, 1/8″ Auxiliary Input Jack for Jam-Along with Media Player and, of course, the handy-dandy Headphone Output Jack for Silent Practice (unless you want to be evicted from your apartment for practicing days on end). Best practice amps are not best just because you can practice in your basement and never move the thing. They are pretty functional and easy to carry around. That’s why Donner put durable, hard material on the edges of the amp and a pad of rubber makes it more sturdy. With that your amp will be pretty much indestructible.


Fuzz bass effects are sometimes created for bass by using fuzzbox effects designed for electric guitars. Fuzzboxes boost and clip the signal sufficiently to turn a standard sine wave input into what is effectively a square wave output, giving a much more distorted and synthetic sound than a standard distortion or overdrive. Paul McCartney of The Beatles used fuzz bass on "Think for Yourself" in the 1966 album "Rubber Soul"

well it all depends on your budget. If you're looking for a beginner guitar go for pluto 39 inch model it will cost you around 5.5k. Don't go below this as all those cheap guitars are useless after 6 to 7 months of use. If you can increase your budget then I'll suggest a cort AD810, pluto 41 inch semi acoustic model, or a fender SA150. These will cost you around 7k to 10k but these are the best you can buy as a beginner! Just remember that your first guitar should not sound crapy and it should be good on your fingers. I hope this helps. Happy guitaring!


"Our expertise is to customize guitars according to the specifications of our clients and we have our own factory that recreates all major guitar brands, boutique brands and collectible guitars. Owning the latest state of the art equipment, craftsmanship and skilled technicians. We take great pride in the quality and designs of our electric guitars and basses. From traditional to unique styles a U.S. Masters instrument rates with the finest in detail, woods, finish, feel, components and consistency. Our designs incorporate some advanced high performance features, some patented, to improve on aspects of sonic response and feel, upper fret access, the ease of playing, comfort and all designed to provide you with one of the finest responding instruments available. These guitars are of the finest, and yet it is only fraction of the cost that you would normally pay. You may be wondering how such an amazing product could be so cheap, It is possible because it has been manufactured in China, where labor is cheap. Cheap labor does not mean that has been compromised; all parts are of the highest and have been imported from overseas. When purchasing this guitar you can only stand to win. If you are satisfied, you have just saved yourself hundreds of dollars! So go on, treat yourself to the guitar you have always wanted. Our 100% satisfaction guarantee allows you to buy with confidence!"
A very good option in the budget pedal market. Comes with a great number of effects to combine for solid sounds. Virtually all the factory pre-sets are worthless and are sort of demonstrations of what the pedal can do. But you have plenty of user saves and setting up good tones is straight forward and simple. The tuner in this and my handheld one never agree. Someone is lying!
A detailed study on MIT physics students has proven that online classes really do work. Guitar Tricks results show that online lessons not only work for physics but also for learning the guitar. A GuitarTricks member survey in 2010 found that 98% would recommend Guitar Tricks. 80% reported that they were learning faster than with any other method that they had tried before. Most members found that their skills increased from 3 to 5 (on a scale of 1 to 10) within a short period of starting the online lessons with Guitar Tricks.
In a band and got your slot to wail? Think about it. Shredding scales is all well and good but the best songs and solos have structure, tempo changes and memorable licks. It may be a cliché, but listen to Jimmy Page’s solo in Led Zeppelin’s “Stairway to Heaven” – now that’s how you build-up to a solo. It may be your time to shine, but don’t just gush everywhere – think about structure and let your solos build and breathe.
Jump up ^ "The first incontrovertible evidence of five-course instruments can be found in Miguel Fuenllana's Orphenica Lyre of 1554, which contains music for a vihuela de cinco ordenes. In the following year Juan Bermudo wrote in his Declaracion de Instrumentos Musicales: "We have seen a guitar in Spain with five courses of strings." Bermudo later mentions in the same book that "Guitars usually have four strings," which implies that the five-course guitar was of comparatively recent origin, and still something of an oddity". Tom and Mary Anne Evans Guitars: From the Renaissance to Rock. Paddington Press Ltd 1977 p.24
From rock to jazz or folk to metal, what separates the great guitarists from the rest is their mastery of the skills taught in this program. From basics like chords and scales to nuances like improvisation techniques, form, control, and inflexion, this certificate program will take your guitar playing to the next level. Few accomplished guitarists have reached their peak alone, and Berklee’s faculty is unparalleled when it comes to delivering the personalized instruction and feedback that will help you turn the fretboard into a playground packed with unlimited possibilities.

In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.


The Yamaha's top is constructed of Sitka spruce, a “strong yet elastic” wood that helps the player articulate tone and dynamics. The neck is made of Nato wood, and the back and fretboard are both made of rosewood. One of the best things about the Yamaha's neck and body is the way the two are joined together: via a hand-fitted, dovetail neck joint that uses no metal hardware. This neck-to-body cohesion is ideal for tone as well as the overall stability and durability of the physical instrument.

A basic tone control consists of a capacitor and a potentiometer (the tone control itself).  The illustration below if the basic wiring for a tone control.  The view is as you would see it from the bottom of the potentiometer, wired for a right-handed guitar.  The oval "blobs" on the potentiometer casing are solder connections.  The ground wire should be soldered to the potentiometer casing for this tone control to work - and it helps shield out unwanted noise (really noticeable if not done this way and you use metal knobs).

Yeah, I wasn't meaning to disparage either brand. While not necessarily "cool", they both offer solid stuff and a really good value that really competes with luxury brands. I'm not a car guy, so I'll stay on the guitar side for an example - Schecter can offer a mahogany body with a flame maple top and binding, set neck, ebony fretboard with abalone inlays, 25.5" scale, compound radius, original Floyd, and name brand pickups for $1000, give or take. Seems like you have to get up into Ibanez's Prestige line or the Jackson USA line to get all that, and then you're paying around $2k.


Along with these effects are 10 guitars: Strat Marshall, Valve ODX, Garcia Guitar, Bleeding Guitar, Blues Guitar, Power Guitar, Mondo Guitar, Synth Guitar, Clean Guitar, and Electric Sitar. The sound of each somewhat matches the guitar it’s supposed to be, but more importantly, there is a notable change in tone with each and since it’s free, I was happy just to have that.
For the hobbyist guitarist this is a great 'bang for the buck' investment. It has practice tools for the beginner but solid tones for the advanced guitarist. For home use, maybe even a garage band it's perfectly adequate. If I were a more serious musician doing gigs with high end audio going to the audience, I'd be investing more than a hundred bucks in my stage rig.

Adding a minor seventh to a major triad creates a dominant seventh (denoted V7). In music theory, the "dominant seventh" described here is called a major-minor seventh, emphasizing the chord's construction rather than its usual function.[27] Dominant sevenths are often the dominant chords in three-chord progressions,[18] in which they increase the tension with the tonic "already inherent in the dominant triad".[28]
Single coil pickups utilize a single magnet. They also typically have a lower output than humbucking pickups, which means they aren’t capable of producing as much distortion as a humbucker equipped guitar. However, because they’re not intended to be used with extreme levels of distortion they have a very rich and musical voice when played with lower amounts of gain.
Black trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

The same no-compromise attitude that gives the Newporter Player its uniquely killer vibe extends to every aspect of its construction. It features optimized bracing for reduced mass and superior resonance, a Graph Tech - NuBone nut and saddle for greater sustain and a Fishman preamp system that makes it easy to plug in without sacrificing the guitar's natural sound. Its lightweight mahogany neck features a comfortable, easy-to-play, slim-taper "C"-shaped profile suitable for any playing style, and its walnut fingerboard and bridge further augment this instrument's vibrant tone.


Prior to dennis, i had never taken guitar lessons. Always tried to teach myself. I struggled since i had no structure, i would consistantly get lost, which would make me put the guitar down due to frustration. Deciding to hire dennis was a break thru for me, and honestly wish i would have looked into it much sooner. Not only has my skills progressed, which they due weekly at a much faster rate then when i was trying to learn on my own, but my confidence and motivatation has increased greatly. I look forward to meeting with dennis each week and building off of what he taught me the previous week. The amount of patience dennis has is great, and the way he explains different things so that i understand is awsome. Would definetly recommend dennis to anyone, whether they have just purchased their first guitar, or they have tried numerous times to teach themselves, or even if you have alot of the basics down, but looking to take your knowledge and playing to the next level.
While Ujam has only been in business since 2010, their members aren’t new to VSTs or even guitar VSTs for that matter. In 2002, Steinberg released Virtual Guitarist, developed by Wizoo, and this was one of the first VSTs that brought credibility to guitar VIs. It just so happens that the man that founded Wizoo, Peter Gorgers, founded Ujam and brought along many of the members, ensuring the same level of detail.

I'm going to break the electric guitar setup guide into five parts, which are all in the links below. It's important to note that the five parts be done in the order in which they're presented. If you have a truss rod that's out of whack, it makes no sense to move on and adjust the bridge. I realize this may be painfully obvious, but for the one person who may not get it, I'm talking to you. Good luck

Sound quality-wise, it’s too close to call. All modern Zoom, Line 6, Boss, and DigiTech multi-effects units sound excellent. Distortion sounds a bit better on the DigiTech, and if reverb is your thing it doesn’t get much better than the Lexicon verbs. The other multi-effects units might be better if you’re looking for more experimental sounds and textures. The DigiTech RP500 tends to be more conservative, and focuses on nailing the classics.
The Octavia was created by Roger Mayer for Jimi Hendrix in 1967. It’s musical debut can be heard on “Purple Haze” on the Are You Experienced record. One of the many ground breaking sounds on this recording. The pedal produces a doubling effect an octave above the fundamental note. The octave is similar to a ring modulator in that it is kind of dirty and strange sounding.

A better idea is turning to established brands like Maton, Washburn, Epiphone, Fender… there’re plenty of respected manufacturers with long traditions in making guitars. No matter what type of guitar, all these companies have low-priced models that still benefit from the care and craftsmanship you’d expect from well-known brands. Prices start around $150 for basic types, then for $500-700 you’ll find an enormous choice.
Good results are usually achieved using a dynamic instrument microphone placed 6-8" from the speaker, off-center. If more low-end is needed, move the microphone closer in (2-5") for increased cardioid proximity effect. Use your ears or a set of headphones to find the "sweet spot" of the speaker. Consider miking the guitar itself with a small-diaphragm condenser in the area of the picking hand aimed toward the bridge, for extra string texture in the track.

We’d recommend starting off with building a clone, or modifying a cheap pedal that you already own – This is why we see so many of the famed Boss DS 1 mods. A lot of the cheap “starter” pedals have a wide array of modifications that can be done. However, if you do not have an old effect pedal laying around, look into getting a pedal clone kit. I recently built a ProCo RAT Distortion Pedal Clone by General Guitar Gadgets, and these kits can really help you succeed in understanding how guitar pedals are built.

And just a quick note: I do not buy or sell guitars. I have no idea what any given guitar from this period would sell for. I don't know if some of the listed guitars are indeed valuable. My sole purpose is to help people looking specifically for information on the maker of their MIJ guitar. So please...don't ask me what your guitar is worth. To me, they're all priceless.
I know of two amp-and-effects modeling apps for the iPhone/iPod Touch/iPad, both of which are great and allow you to get realistic amp tones through your headphones. AmpKit and Amplitube both do a great job of simulating all the standard amp models and pedals, and they aren't very expensive. I use and prefer AmpKit myself, and between the app and the guitar-to-iPhone interface, I spent a total of $50.
I don't remember if it was actually an LP special II, but the first guitar I bought with my my own money at about the age of 15 was an absolutely beautiful Epi Les Paul. Black, with a really nice quilt maple top. I fell in love with the way it looked. Well, it turned out that guitar sucked. I mean it really sucked. Bad intonation, bad tuners, bad pickups, bad bridge, everything.I saved up my money sacking groceries for like 6 months and I ended up spending that hard-earned money on a crap guitar. I put it on layaway and my dad would drive me up to the store once a month and every time he would try to talk my into other guitars, Fenders mostly (he is a musician also). Nope. I really liked the way the guitar looked. I was young and stupid.
The customer then tells me that it was the second brand new preamp that they failed to get working. The first one they couldn’t get working and blamed it on a defective preamp. Could have been, who knows? So the guy orders another new preamp and they still couldn’t get it working after 2 weeks. Sadly, they charged him anyway and he left with a bass that still was not working. So he brings it to me after being recommended by some of my very kind customers.
Nice-4-Bass-V1.5 This is an sf2 simplified version of three different basses - all with 4 velocity layers.  It includes the 1958 Otto Rubner double bass played and mapped by Drogomir Smolken, recorded by Ludwik Zamenhof. The samples are exceptional and some percussive effects have been mapped to some high notes. Royalty-free for all commercial and non-commercial use. Copyright 2016 Karoryfer Lecolds (Karoryfer Samples). The original Meatbass sfz version for Sforzando has round-robin sampling and includes arco as well as pizzicato presets.  (http://www.karoryfer.com/karoryfer-samples).
A half-century later, effects are everywhere. Whether they’re built into your amplifier, a single pedal, multi-effects processor, rack-mounted, or controlled through an iOS device, there’s a vast array of tones at your disposal, ready to add sonic magic to your performances or recordings. Most recording and performing guitarists have come to depend on effects to add flavors both subtle and flagrant to their sound, helping them to carve out the signature tones with which they’re identified.
Now lets talk amps. I have always felt like you could hand me a great guitar played through a bad amp and I would get a bad tone. However, I can make a bad guitar sound decent through a good amp. The amp, in my opinion is the most crucial part of your tone. I always prefer tube amps that deliver a much warmer, natural sound then the solid state counterparts. However if you are play jazz or something that requires a clean crisp sound, a solid state amp good be great. All the great rock legends used tube amps such as Marshall Plexi’s, Vox AC30, Hi Watt, Fender Twins, Fender Bassmans etc. Now days they make all kinds of boutique amps that are modeled after these classic amps. Matchless is my amp of choice which is loosely modeled after the Vox AC30.
While this isn't an exhaustive list, I think it covers the main pedals. Although others may disagree, beginners are unlikely to need to know about the others. We've tried to stock some of the most popular pedals in our store. So if you're still not completely sure what to buy, why not try one of those out? The pedals we sell are inexpensive but great sounding alternatives to those mentioned above.
The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!
1979 Alvarez 5053 - D-45 Martin Style Replica Japan Crafted Exotic Brazilian Jacaranda Rosewood Here we have a really great one from our 30 years of Alvarez collecting and she is absolutely one of the finest Alvarez model Martin Copies crafted in Japan from this golden era the late 1970's.. This example is a 1979 #5053.. its ALL ORIGINAL with the only exceptions being we changed the old cheap tone defeating plastic nut & saddle for the preferable upgrade to a Martin bone nut & compensated saddle set and of course the Martin Marquis 80/20 Phosphorus bronze strings 12’s strings along with the Martin Bridge pins as seen. This is a unique & exotic true Vintage Japanese version of the classic ornate Martin D-45 again this one was Crafted in Japan by one of the finest acoustic instrument builders from this time period Alvarez, This guitar is possibly even a bit more fancy than even the actual Martin D-45 with the intricate exotic woods used see this examples exotic Beautiful 3-piece back simply gorgeous! The Martin D-45 version just has a 2-piece back in most cases...This example is a RARE Alvarez with such woods and its workmanship level is very ghigh suggesting a master luthiers hand its model #5053, with the date stamped inside on the label reads ( 1979 ).,,see pic detail. Bound body(front w/b/w/b/w/b/w, back w/b/w/b),bound neck(white),bound peg head(w/b/w). See the Beautiful detailed Abalone inlay around the sound hole with its white mother of pearl fret markers. With an adjustable Ebony bridge with a bone saddle and the sweet smelling Brazilian Jacaranda Rosewood fretboard its simply stunning. Special truss rod cover that has the word Alvarez in gold lettering and SLM (Saint Louis Music)in gold also. Medallion on the back of the headstock says imported and customized Saint Louis Music since 1922. Choice Sitka AAA Spruce top, with old highly exotic looking Jacaranda Brazilian Rosewood - awesome landscape figure sides are very figured exotic looking Jacaranda. Smells great. Wonderful exotic figuring. for the back and sides Better looking we haven’y seen...The Perfling between the woods on the back is just absolutely stunningly gorgeous,unbelievable craftsmanship!!. I've only seen one other like it. Real difficult to find much info on these rare exotics. A truly Beautiful vintage Japanese acoustic guitar and quite the collectible instrument ...for the person wanting only the best at a fair price...not on sale for $6,000-8000 like the Martin this one is a true bargain Vintage exotic WoW! What a great find. JVG Rated at a solid 8.8/10 very good original Vintage condition. I suggest you get his before she's gone..don't know when I'll find another like it. .
In 1954, Fender introduced the Fender Stratocaster, or "Strat". It was positioned as a deluxe model and offered various product improvements and innovations over the Telecaster. These innovations included an ash or alder double-cutaway body design for badge assembly with an integrated vibrato mechanism (called a synchronized tremolo by Fender, thus beginning a confusion of the terms that still continues), three single-coil pickups, and body comfort contours. Leo Fender is also credited with developing the first commercially successful electric bass called the Fender Precision Bass, introduced in 1951.
It is definitely an opinion based list, ask 100 people, and get 100 different answers. But please, 99 out of those100 would have Clapton on it, the list loses credibility without him. Pictures of “Clapton is God” tags around England stick in my mind. Even among his peers he is revered, he just has to be here! Page should be higher, but of course, that’s just my “opinion”.
{ "thumbImageID": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "defaultDisplayName": "Squier Affinity Mini Strat Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pink", "sku": "sku:site51500000053100", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink-1500000053100.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000053099", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red-1500000053099.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red/J86206000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red/J86206000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053098", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black-1500000053098.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black/J86206000001000", "brandName": "Squier", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black/J86206000001000-00-60x60.jpg", "imgAlt": "" } ] }
The Effect: Volume pedals are a simple, yet frequently essential piece of equipment for many musicians out there. This device’s function is quite self-explanatory – it allows the user to control the level of the sound output, allowing them to increase or decrease the volume of the instrument. Additionally, many of these products can also operate as expression pedals, or a control for some of the other effects on your pedalboard. These gizmos are typically known for being strong and sturdy pieces of gear, as they should since they get stomped on quite a lot. If you are looking for a proven solution, go for the Boss FV-500H, if not, check out our Best Volume Pedal reviews to find your perfect match.
Say that three times fast.  Don't even bother yourself about halfround strings.  They aren't that popular for a reason, but it is good to know they exist.  The roundwound strings feature a textured surface created by winding a round wire around the core metal.  Flatwound strings are far more flat along their length because the core is surrounded by a smooth wire, as pictured below:
If you’re a beginner you might not feel like you know enough to be able to test play different guitars, but play whatever you know and see if you notice any difference. If you only know a few chords, or even “Smoke on the Water”, then play that, it’s better than nothing! Don’t care about the staff hearing you play, they’re used to it and are probably just happy to have a potential customer.

Honestly, a couple of years back I never looked at Fender for acoustic guitars because everyone was always talking about Taylors, Gibsons, Martins, Takamines, Paul Reed Smiths etc. Despite being a very good electric guitar company not to mention the inventor of the no. 1 guitar in the world, the strat, everyone always looked Fender, alongside with Ibanez and Washburn (good electric guitar brands) as bad acoustic manufacturers. I was one of them too. For me, Washburn and Ibanez might be a good budget acoustic guitar manufacturer but they don't deserve to be high in this 'top acoustic guitar brands' list. But for Fender, these past few months my mindset about them changed. I never realized how authentic and good sounding fender acoustics were way back then but I'm happy now that I changed my mind about them. I love them now. It's not about having vintage acoustics, or having high end prices. Fender don't set their prices as high as taylor, martin or gibson but they must not be judged ...more

The panel on top carries the controls for an old school look and feel overall, consisting of a master volume, gain, bass, treble and the model AC10 comes equip with a built-in reverb effect that makes it even more powerful and articulate to use. This amp is at top of its class when used at home, awesome for a recording studio and bringing it on stage to cover a small to medium size venues.
{ "name": "Heritage Cherry Sunburst", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Heritage-Cherry-Sunburst-1500000014896.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "10-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014896", "shipToStore": true, "displaySku": "J40301000003000", "displayId": "1500000014896   POS #: 112318340", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Heritage-Cherry-Sunburst/J40301000003000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Heritage Cherry Sunburst", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
{ "thumbImageID": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51296155735774", "price": "129.99", "regularPrice": "159.99", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry-1296155735774.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-Cherry/H71861000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51296155735784", "price": "129.99", "regularPrice": "149.00", "msrpPrice": "265.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow-1296155735784.gc", "skuImageId": "Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Limited-Edition-Les-Paul-Special-I-Electric-Guitar-Worn-TV-Yellow/H71861000003000-00-60x60.jpg", "imgAlt": "" } ] }

The reason being that guitar manufacturers will usually look to keep costs down in the pickup department. This is particularly true for budget models, which will usually be fitted with stock pickups that do the job, but fall short of truly impressing. So guitarists with an affordable, but playable guitar may wish to upgrade their pickups, to make their favorite axe gig-worthy.
Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
Beautiful Teisco Electric Guitar refinished in sea foam green or Daphne blue color, it has a custom series parallel pickups toggle switch, nice low action, sweet sound, plenty of tonal possibilities. Buy with Confidence....... Blessings! Item will be well packed, shipped and insured to any of the 48 contiguous States, No Alaska, No Puerto Rico, No Hawaii, No International buyers.

Originally started as a replacement parts shop in Japan, ESP Guitars – which stands for Electric Sound Products – got their guitar manufacturing business off to a rocky start here in the United States. They were taken to court by Gibson guitars for producing instruments that too closely resembled the American brand’s guitars. But, they settled out of court in 1978 and ESP’s reputation eventually grew, thanks in part to George Lynch, the guitarist for the 80s metal band Dokken, and his signature axe pictured here – The Kamikaze Model 1. Now, ESP guitars are wildly popular amongst metal and hard rock clientele and you can hear their instruments on the records of some of the brand’s loyal artists – including the likes of James Hetfield and Kirk Hammett of Metallica, Page Hamilton of Helmet, and the guys in Children of Bodom.
The internal bracing has also been updated to a forward shifted pattern to further enhance the dynamic range of the soundboard and the guitar’s overall projection. The Taylor 214ce has a nice punchy sound and good articulation. If you need more output, just plug it in and let the onboard Expression System 2 (ES2) pickup do its job. The ES2 features a patented behind-the-saddle pickup and knobs for volume and tone, giving you total control over your tonal output.
CLEAR COATStew Mac sells nitrocellulose lacquer that works realy well for guitar finishing but if your like me you can't afford $10 a can for paint. Or you can check out reranchthough I haven't used any of their products they are a little cheaper. I use Deft spary lacquer. You can get it at Wal-Mart for under $5 a can and it works great. Use the same basic steps that you used when you sprayed you color coats, keeping in mind that you want enough coats so you don't cut through the clear top coat when wet sand and polish it out. Now comes the waiting. The paint has to set for several days to a month to let the solvents that are in the paint to rise to the top and harden. The paint will feel dry but you will notice that it might feel a little sticky or soft when you touch it. I like to do a "nail" test on mine. I use my finger nail and push it into the painted area in the neck pocket to see if it is still soft. No one will see the inside of the neck pocket so it's ok if you scratch it. Once it has cured completly you shouldn't be able dent the finish. It could take longer than a month for certain finishes to harden completely but trust me, you will be glad that you waited. For more information about all the different types of lacquer or clear coats products that are out there and how to choose what may be right for you, check out the drum foundry they have some great info.
To set up guitar pedals, use a short patch cable to connect your guitar directly into the tuner pedal if you’re using one. If you’re using filter effects pedals, like auto-wahs and envelope filters, connect them next. Plug in your compressor pedal after the filter pedals, followed by pitch-shifting, overdrive, and distortion pedals. Set up your modulation pedals, like chorus, flanger, tremolo, or phaser pedals, near the end of the chain so they’ll have a richer sound.
Many pedalboards on the market are powered. They feed DC power directly from the board to your pedals, eliminating the need for battery changes or external power adapters. This simplifies your setup and minimizes your need for power outlets. Some pedalboards even have a small built-in combo amplifier, making them a great practice and jamming solution.
But if you never play with a tone as dark as the fully-rolled off sound, you might consider a lower-value cap. The next example is an .033μ (also know as 33n and 333), another popular choice, followed by the smaller .022μ (also know as 22n and 223), and the even smaller .01μ (also know as 10n and 103). As the cap gets smaller, the minimum tone knob settings gets less dark. As the overall range of the tone pot decreases, it may be easier to locate any desired “nooks and crannies” between the highest and lowest settings.
For something like the application you suggest, getting a used prior generation Line 6 pedalboard like, say, an HD500, might be more cost-effective than trying to patch your laptop into the effects loop of an amp. You can fine tune the Line 6 and add downloaded patches to it with your laptop via a USB cable, but still be able to hook the Line 6 up to your amp with standard 1/4″ TRS plug instrument and patch cables like you use with stomp boxes. Your total outlay would be maybe $250, possibly even less, and that particular model is giggable, versatile, includes a looper, and sounds about 99.5% as good as Line 6’s current stuff. Even the POD X3 Live I have lying sounds pretty darned convincing on many of its models, and it’s like three generations long in the tooth.
On guitars with bound fingerboards, shrinking of the binding can produce a gap large enough to catch the treble E string when pulling it over the edge. If only a few our present I will fill the gap to eliminate the problem. If the binding shrinkage has introduced gaps at every fret, the board should be re-radiused to eliminate all gaps and re-fretted.

Later makes of fuzzes—and later generations of those above—moved on to silicon transistors. Many players found the silicon-based models a little harsher sounding, however, and the legend of the magical germanium transistors began to grow. Even so, plenty of guitarists get along just fine with the silicon variety. Eric Johnson, often credited with ears of canine keenness, has used a silicon-transistor Dallas-Arbiter Fuzz Face to drive the dirty rhythm of his famous multi-amped, multi-routed set-up. He also holds the unit together with a rubber band because he says the bottom plate’s central mounting screw affects its tone. Make of this what you will.


Need an affordable luthier who is easily approachable with a cool little shop that rivals Pinocchio's gepetto? Then Steve Morrill in Boston is the place to take your beloved stringed contraption. I took my stratocaster here a few months back for a basic setup( innotation, neck/pots cleaning, truss rod adjustment, etc.) He did it all in less than a week's time and at a very good price--just $65 for everything including new string setup. I was able to play a few notes on his fender amp when I picked it up and was immediately pleased. The aura and smell in the little shop is enough to guarantee Mr. Morrill will do your guitar right. Also doesn't hurt to help out a small business as opposed to going to guitar center, there's much more thought and time out into the work here.

The key to getting a great guitar sound really is in the hands of the engineer, not his equipment. I've gotten great sounds in multi-million dollar rooms, and topped them in the smallest of home studios. You can do it too. The key is to constantly experiment and apply some basic physics. Try different mics, try moving them closer and farther, try different angles, try putting the amp in a corner, try putting the amp on a concrete floor, try it on a wood floor, try it on a floor with green shag carpeting, just try anything!
The only reason the Yamaha Pacifica would have low action is if the string height was set low. Just making a broad statement like “if you want a low action guitar buy a Yamaha Pacifica” I know that is not your words but that is what you seem to be implying. Some beginning guitar player could buy a Yamaha Pacifica that has high action. All guitars can have low action if they are set-up to have low action. Some good info here regardless. Ben.
Where do you people get off not even mentioning BC Rich. They have a fine selection of Guitars, they use some of the best woods you can ask for, very good electronics, and Kerry King of Slayer fame will only play BC Rich, that in itself should be enough said. On top of that the body styles that they have to choose from is far more innovative and original than anything that Ibanez could ever dream of producing. Fender and Gibson are in fact the most well known guitars in the world but frankly the body styles are outdated and worn. They believe in staying with what works but wheres the originality? Im sorry if I offend but BC Rich til death. I have never seen anyone come up with anything as wild and as evil looking as the worlock models. I mean the nickname for a guitar is an axe but so far only BC Rich guitwrs look like somthing you can take into battle, and the sound is like the very voice of Satan himself. And shame on you all to forget about Dean Guitars, They were used and endorsed by the God of Metal shreddiing himself Dimebag Darrell Abbott. The man died on stage with one in his hands. RIP Brotger and Goddspeed. give repect where respect is due.

I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.
After reading through Teach Yourself to Play Guitar, my opinion is that if you are giving a guitar as a gift to someone, this might be an OK book to accompany that. If you wanted to spend a bit more, or are looking for a book for yourself, I would go with the 2nd book reviewed below, the Guitar for Dummies book. It has online video and audio demos, and hearing what you should be playing helps when learning music... 😉
The Quebec-based Robert Godin decided to create his own music instrument company in 1972. Today, the manufacturer sells its products under different brand names: Norman (entry-level and mid-range acoustic guitars), Art & Lutherie (entry-level guitars), Simon and Patrick (mid-range and high-end guitars), La Patrie (classical guitars), Seagull (entry-level and mid-range acoustic guitars), and Godin for electric guitars. Some models are equipped with a piezo and/or "synth" pickups. The body shape is pretty classic, somewhere between a Les Paul and a Telecaster. Among the most famous Godin players we have John McLaughlin and Leonard Cohen. The brand catalog is sorted in different series: Performance Series, Signature Series, Multiac (acoustic/electric hybrid), Passion Series (high-end instruments), 5th Avenue Series, plus some very original single models like the Glissentar, an acoustic/electric 11-string nylon-string fretless guitar!
I received a Dorado 12 string as a birthday present in the late 1990s, installed a passive pickup, and played it around the house and at small venues for fifteen years or more. For an all-laminate, smaller body 12 string with a trapeze bridge, it sounded great. The neck was comfortable, too. I had a 1965 Gibson B-25 12 for a few of those years, but the neck was way fatter than the Dorado, which I passed along to a friend in need. I can't say the Dorado sounded better than the Gibson, but it sure out-jangled it. Wish I still had it!

Great guitar this is my 2nd one fist one i purchesd in 2010. Had to pown it I was realy upset about it but nothing i could do. I was so happy to find another one here on Amzon!!! Only thing it did not come with A pick card as addvertized. Thats why iam giveing it 4 in stead of 5 stars. Case that comes with it is realy cheep you would think the money invested the would at least give you a padded soft case.I have orderd a hard shell Gator case for it it will be here in 2 days. This is why it gets 3 stars. Iam a pro. Guritist and song writer,singer. Guitar it self gets 5 stars
The value of the guitar will also be an important factor that will contribute to the overall score – because spending $200 on a model that sounds like a $2000 guitar is always something that can’t be ignored! We rate the best acoustic guitars and the best bass guitar list in the same way. With every new model we add and review, we update the top 10 rankings.
This beautiful wood is not a very common tonewood for the construction of a guitar body, but you may see it more commonly in neck construction. However, it has been done to build a guitar body, and it was done well on the famous Gibson J-200 that the Epiphone EJ-200SCE also imitated. It’s a very solid, hard, and dense wood that has amazing sound punch and bright tones.
Copyright © 2016 Sonoma Wire Works. All rights reserved. RiffWorks and the RW Logo, RiffWorld, RiffCaster, RiffLink, RiffRumble, InstantDrummer, StudioTrack and the StudioTrack iPad App Logo, the FourTrack iPhone App Logo, GuitarTone and the GuitarTone Logo, GuitarJack and the GuitarJack logo, DrummerPack, KitPack and Discrete Drums are trademarks of Sonoma Wire Works. DrumCore and KitCore are registered trademarks of Sonoma Wire Works. iPod, iPhone and iPad are trademarks of Apple Inc., registered in the U.S. and other countries. Android is a trademark of Google Inc. ReWire and REX2 are technologies licensed from Propellerhead Software. VST is a trademark of Steinberg Media Technologies GmbH. All other trademarks are property of their respective owners.
If it helps, Schaller have very accurate drawings of all their hardware on their website. You can also get very good drawings of all Gotoh parts as well, but theirs are harder to find (hidden in the parent company's site and I can't recall the full details). It is worth having a look at those, and pay attention to the way the tuning posts are shaped. That radiused section turned into the post is important , it really helps lock the strings firmly.
Music enthusiasts can find a wide range of new and used guitar amplifiers on eBay, often for deep discounts.  Buyers who want to explore a wide range of possibilities should simply enter the keywords "guitar amplifier" into the eBay search bar, while those with more particular needs can refine their search by adding keywords associated with the make and model of the amplifier, as well as its color or condition.  The "ask the seller a question" feature will enable the buyer to ask additional questions pertaining to style, sound, and condition (if the guitar amplifier is used).
Electric instruments have a big role to play in the world of music, but there's a catch: they need amplification to do it! For that matter, even acoustic instruments need to be boosted when they're playing big venues. And while an amp alone can handle those tasks, many of the sounds in modern music (the signature distortion of rock and metal, for instance) rely heavily on effects units to shape the basic tone into something even better. If you're new to your instrument, then consider this selection of amplifiers and effects the doorway to your future sound - and your instrument will be the key that opens it up, once you've got your hands on your brand new hardware!
A. It is never too late to learn how to play a musical instrument. An acoustic guitar does present some unique challenges for beginners, including the formation of calluses over time. Some working professional guitarists actually develop deep grooves on their fingertips after years of performing. But this is not a requirement in order to become an accomplished amateur guitarist. Practically every musical instrument places some physical demands on players, but developing skills like muscle memory and improvisation are tangible benefits of that extra effort.
As nobody wants to lug around a 50-watt combo when casually travelling, many guitarists rely on portable amplifiers to quench their amp needs while on the road, street corner or beach. Power isn’t particularly important in this category – size and weight are the most crucial aspects. Other factors such as being battery-powered and having a headphone jack are also key features of these amps. One of the most impressive is the Roland Cube Street, which is a street performer’s dream as it offers great portability, a decent 5-watt output, two channels and several on-board effects.

This model comes in Takamine’s NEX cutaway guitar body, and features a slimline mahogany neck with 12”-radius rosewood fretboard. The result is an acoustic that plays really quickly, and is more than comfortable right up in the high frets. Ideal for virtuoso players. Takamine also use their own preamp system here, which includes three-band EQ and gain controls, mid contour switch, notch filter and EQ bypass. It all sounds great.
There is dust or corrosion in the potentiometer behind the knob. You need to turn the volume knob between 1 and 11 over 9000 times to wear the track clean again. . If that does not help taking the electronics tray out of the amp (don't break the wires and don't electrocute yourself) to check if the volume potentiometer has any holes. Using a can of compressed air or non-reactive solvent from an electronics store with the thin nozzle tube supplied, blow or flush out the dust. . If it really annoys you and you can't get rid of it, replacing the potentiometer(s) with new sealed ones will overcome the problem forever. or use standard ones and remember to turn the knobs every week to stop dust from settling. . PS. if it is a high powered amp there will be capacitors inside that can seriously hurt you even when the amp is unplugged.
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
Nylon strings are the standard for classical guitarists in today’s market.  While there are many types of nylon strings, the most commonly seen is clear nylon.  They are visually appealing while providing a clarity of tone with a bright attack that offsets the mellow overall tone of the classical guitar.  Other options include black nylon, rectified nylon, and composite strings.  The best classical guitars on the market come strung with nylons by default still.
Solid-state amplifiers incorporating transistors and/or op amps can be made to produce hard clipping. When symmetrical, this adds additional high-amplitude odd harmonics, creating a "dirty" or "gritty" tone.[37] When asymmetrical, it produces both even and odd harmonics. Electronically, this is usually achieved by either amplifying the signal to a point where it is clipped by the DC voltage limitation of the power supply rail, or by clipping the signal with diodes.[citation needed] Many solid-state distortion devices attempt to emulate the sound of overdriven vacuum valves using additional solid-state circuitry. Some amplifiers (notably the Marshall JCM 900) utilize hybrid designs that employ both valve and solid-state components.[citation needed]
Electro-acoustic guitars are commonly referred to as semi-acoustic guitars. Electro-acoustic guitars have pickups that are specifically designed to reproduce the subtle nuances of the acoustic guitar timbre. Electro-acoustic pickups are designed to sound neutral with little alteration to the acoustic tone. The Ovation range of Electro-acoustic guitars have under-the-saddle piezo pickups and a synthetic bowl-back design. The synthetic bowl-back ensures a tough construction that stands up to the rigours of the road while offering less feedback at high volumes. Ovation were the first company to provide on-board Equalization and this is now a standard feature. The Taylor Electro-acoustic range uses the traditional all-wood construction and the necks of these guitars have a reputation for superb action and playability. Yamaha, Maton and many other companies manufacture Electro-acoustic guitars and the buyer is advised to test as many models and makes as they can while taking note of the unplugged and amplified sound.

Budget acoustics usually have a very high action (which may be possible for a good luthier to fix!), barre chords on acoustic guitar can be demanding and require good finger strength on a well set up guitar, on a budget thing with a high action it will be next to impossible! Cheaper acoustic guitars can be very hard to play higher up the fretboard because the strings are too far from the fretboard - if you find this, the truss rod (a thing inside the neck that controls how 'level' the neck is) can be adjusted by someone who knows what they're doing! If you can stretch to a mid-priced acoustic you should be able to get something suitable for a beginner.
Also shown in ’60s Bizarre Guitars, but not in the Teisco book photo, is a ca. 1954 Hawaiian Teisco EG-R which was sort of shaped like a Gibson and which had the same pickup as the J-1, with more elaborate symmetrical metal rocket shapes on the sides, housing the volume and tone controls. A chrome dome sat in front of the pickup between it and the dot-inlaid fingerboard. The head was stubby and rectangular. This was very “Moderne” looking, very Buck Rodgers.
While many individuals who want to become guitar technicians dream of working with big-name bands, it is more realistic to work with smaller bands first to gain experience. Local bands often need extra help with many of the technical aspects of show production. Techs may be asked to perform other tasks besides guitar maintenance, such as stage set-up and breakdown, driving the tour bus and selling merchandise. All of these activities can provide techs with invaluable knowledge regarding staging live performances.
A classic Western guitar from the Far East, this Vintage Global guitar was made in Japan sometime in the 1960s and imported for Sears and Montgomery Ward department stores. It's got a swell pick guard with a honeysuckle blossom and a hummingbird and an ominously undecorated fretboard that has absolutely no dots or markings whatsoever. Other features of the Vintage Global guitar include a snazzy sunburst finish, classic imitation wood inlay decorative sound hole decal, and cheap white plastic tuning knobs. This classical acoustic guitar has absolutely nothing in the way of "warm tones" or any other term typically used to describe finely crafted stringed instruments. Instead, it has a distinctive sharp and rumbly quality that is great for recording or live applications where a "lo-fi" sound is desired. This Global guitar has decent action and is easy to play. Speaking from experience, it really cuts through the other tracks in recording and adds a humble trashy sound while staying in tune and functioning like a normal, decent quality guitar. The Vintage Global guitar showed signs of moderate use and had a number of nicks and scratches around the edges. The hummingbird pick guard had some scratches / wear in the black glossy surface near the very top corner, but otherwise was in excellent condition. The neck was straight and the guitar had no cracks or other serious bodily damage. Body measures 17 /2 inches x 14 inches x 3 1/2 inches. Neck measures 16 1/4 inches in length from nut to end (minus headstock) and is 2 3/8 inches at widest point. This Global Hummingbird Guitar sold and is probably making beautiful music on the other side of the country, but lots or really cool-looking vintage Global guitars can be found on eBay.

Like in the overall best-selling list, there are a few amps on this list which have been discontinued but continue to sell very well on the used market. Part of the reason these amps rank so high on our lists is that Reverb is one of the only places these models are still being sold, meaning that our sales likely account for a sizable chunk of the entire used market for these particular amps.

So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
It also includes a -6dB/oct low-pass filter that’s built into the plugin’s tube/valve modeling equation, and can imitate a lower-quality tube triode.  There’s a switchable output saturation stage, which can be used to overdrive the output signal and all the standard Voxengo plugin features, such as full multi-channel operation, channel routing and built-in oversampling. It’s great for guitars and for dirtying up sounds such as vocals, drums or synths.

10. Behringer Ultracoustic ACX450 45-watt ($229.99): Not to leave our acoustic-centric players out of the list entirely, the Behringer Ultracoustic not only looks amazing, but it has a ton of features to keep you inspired and sounding great. Two channels are utilized so while you plug your acoustic into channel one, channel two allows you to input a microphone or another source. The FBQ Feedback Indicators allow you to control the feedback coming out of your amp by monitoring the LEDs on the graphic EQ. Need your own guitar effects? The ACX450 allows for 16 different presets on each channel, including delay and reverb. A great bargain for those looking to take their acoustic playing to the next level!

Martin’s second major innovation, and arguably the more important, of the period 1915-1930 was the dreadnought guitar.[6] Originally devised in 1916 as a collaboration between Martin and a prominent retailer, the Oliver Ditson Co., the dreadnought body style was larger and deeper than most guitars. In 1906, the Royal Navy launched a battleship that was considerably larger than any before it. From the idea that a ship that big had nothing to fear (nought to dread), it was christened HMS Dreadnought. Martin borrowed this name for their new, large guitar. The greater volume and louder bass produced by this expansion in size was intended to make the guitar more useful as anaccompaniment instrument for singers working with the limited sound equipment of the day. Initial models produced for Ditson were fan-braced, and the instruments were poorly received[citation needed].
This is a very rounded sounding electro-acoustic bass. Recorded straight without a mic, so there is no noise. This fits nicely with most types of music. Its deep but not overpowering, leaving room for other instruments. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix somewhere between the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two.
Fender is considered as an American manufacturer of amplifiers and stringed instruments, which was founded by Clarence Leonidas Fender in the year 1946. They provide a wide range of guitar. It has comfortable necks and  smooth fingerboard. Their headquarters located in Scottsdale, Arizona, United States. The guitar will available at Rs. 12,199/- onwards (approx). For further information, visit fender.com.
Semi-hollow body electric guitars are basically a middle ground between a solid body electric and a fully hollow body electric guitar. Jazz, country, and rock guitarists alike may gravitate towards semi-hollow body electric guitars for several reasons. One of the main reasons is that semi-hollow body guitars still produce that rich, resonant sound of a hollow instrument, but they typically have a solid or sometimes chambered center block in between the top and back. This design helps fight off that unwanted body-resonant feedback we spoke about before while even adding some extra sustain. Gibson offers a wide selection of semi-hollow body electric guitars, which include the iconic Gibson ES-335. Guitar brands such as Gretsch and Ibanez are also widely recognized for their semi-hollow body electric guitars.
×