Chorus is a great way to thicken up the sound of a bass (especially in a 3-piece band), rhythm guitar, or solo guitar. It is often used with distorted sounds but is a fantastic way to create full-sounding clean sounds as well. Stereo output (from two separate speakers) enhances chorus a great deal. Many acoustic guitar amps include a clean-sounding chorus effect adding depth and character to the amplified signal. Chorus pedals can be very helpful in fattening up the tone of acoustic-electric guitars whose piezo pickups tend to sound a little thin.
You don't have to use plug-ins! Some synths such as the Virus TI have very flexible effects built in. You don't have to create audio effects in your sequencer. For example, I use the Access Virus synth, which features a simple delay effect, with the added bonus that all its parameters are available in the modulation matrix. One favourite trick involves routing velocity to the delay colour parameter. For parts that get brighter with increased velocity, it adds extra animation and bite if the echoes also get brighter. Unusually, the Virus also features four-way audio panning, so you can position an audio signal anywhere between the main stereo outputs and a second pair. If the second pair of outputs is routed to an external effects unit, you can play with the concept of moving a note around in a space, where its position also determines the treatment it gets. More fun can be had by modulating reverb time and colour via an LFO. The same LFO can then be used to control filter cutoff, EQ frequency and maybe wavetable position too (if your Virus is a TI). In this way, timbral changes happen at the same time as effect changes. Paul Nagle
I participated in what I think was perhaps Gibson's best SG...a prototype made for Robbie Krieger. It had my then-patented carbon fiber "T" cross section fingerboard which absolutely took care of the #1 problem with SGs...the rubber neck syndrome. It also had a beautiful flame maple top on the mahogany body and it got a cherry sunburst. Fabulous guitar. Robbie must still have it.
In 1951, this initial rejection became a design collaboration between the Gibson Guitar Corporation and Les Paul. It was agreed that the new Les Paul guitar was to be an expensive, well-made instrument in Gibson’s tradition. Although recollections differ regarding who contributed what to the Les Paul design, it was far from a market replica of Fender models. Founded in 1902, Gibson began offering electric hollow-body guitars in the 1930s, such as the ES-150; at minimum, these hollow-body electric models provided a set of basic design cues for the new Gibson solid-body, including a more traditionally curved body shape than offered by competitor Fender, and a glued-in (“set-in“) neck, in contrast to Fender’s bolt-on neck
What is the best acoustic guitar brand? That's subjective, and often based on a consumer's past experiences with a specific brand. This list includes a vast majority of the most recognizable good acoustic guitar brand names that are currently on the market. This list includes those acoustic guitar brands that consumers might wish to learn more about.
As one user put it, this is one of “Amazon’s hidden little gems”, with a good set of tube electronics that gives out a natural sounding overdrive and some crystal-clear rhythmic sounds. If you want to make your guitar sound clear enough to accompany Porcupine Tree while also having the option for a natural grainy sound that might work well for jazz and blues, then this item is definitely something to look into.
You will definitely want to start slow, with an almost completely dry signal, and start adding some reverb bit by bit. Depending on the type of music you are making, that subtle hint of reverb may be all it takes to get the point across and make that track sound more organic. If you want to take things a bit further, recording a completely dry track and then mixing it with the very same section with added reverb can yield some pretty interesting results. As you have probably noticed by now, experimentation is the key here. The most important thing is to start slow.
I am old enough to remember Kay guitars back in the 70's. And what I remember of playing them is they were poorly put together, poor action (like mile high action), poor sounding pickups etc...They also seemed to always be the guitars that were the cheapest in all the mom n' pop stores, and the ones that were just sold to students, if they were sold at all. In other words,
Hi everyone! I have a quick question regarding string action. I have just gotten my 2003 Standard set up a few months ago, but I am having trouble with how low the action is; strings slip off of my fingers during bending now. If I just turn the screws on the Tune-O-Matic bridge to heighten the action a little bit, without touching or adjusting the truss rod, individual saddles, or tailpiece, will that screw up my intonation?
Quirks? Some. The old Rola was kind of tired, so I saved it and put in a new Jensen Mod I had laying around (not a bad little speaker, but not a vintage Jensen, either…expect a future upgrade). The 7F7’s are supposed to be very loud and micro-phonic (which was why we don’t tend to see them in guitar amps after the mid-late 40’s), but this one sounds just fine. And they’re cheap, so it’s not like you’re hunting down good EL86’s or anything. Also, one thing that took some getting used to was the tone knob is backwards by contemporary standards. That is, turn the creamy chickenhead to the left, you get more treble (and more drive and volume). Turn to the right, and it gets very bassy and like a chewy jazzy tone.
The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.
After the introduction of electronic transistors in the 60s, engineers began to emulate these new and raw vacuum tube sounds with the new technology. They often used germanium transistors, which were not only cheap, but also had a sensitivity for generating bizarre fuzz tones, a quality that became a key ground for experimentation. The first mass-produced box was the Gibson Maestro FZ-1A Fuzz-Tone, which launched in 1962, right at the birth of British rock: The Fuzz-Tone was responsible for Keith Richard’s sound in 1965’s “(I Can’t Get No) Satisfaction,” transforming it from a mild Dylan-esque acoustic record into the Stone’s signature confrontational delivery.
Being a PODHD user for many years now, I am but one of the many who commend its balance of versatility and sound quality. Like many reviewers, it allows me to gig and record conveniently, often times plugging straight to PA with great results. I've also seen a number of professionals using PODHD500X's in their concerts, so it's not surprising that even experts at Music Radar were convinced, saying: "The modelling is excellent throughout, with authentic-sounding amps and quality effects".
5 Star...So fun...I bought the playstation 4 for my wife for Christmas it came with the game uncharted 4 I'm surprised my wife played it and loved it so when she seen the uncharted the Nathan drake collection it has 1 and 2 and 3 on it she had to have it she started playing it and she loves this game also...great games to have for that special moment when you are in the mood for a journey.Few games have that replay ability when you get to know Drake you just can't put it down great deal great price only problem why I gave it 4 Stars there is no incentive or discount if you have already purchased it for Ps3 and now you would want it for your Ps4 but as I said great deal great story great price
International shipping and import charges paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab International shipping paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping is paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab
• Wrap around: On wrap around tailpieces, what’s wrapping around is the string. Strings are slid into the tailpiece from the front and then pass over the back and top of the bridge before making their journey up the neck. This system creates less string tension. Some players report tuning and intonation issues with these tailpieces. Others swear by them.
We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!
By the late 1950s, the Les Paul was considered “staid and old-fashioned” as well as too heavy and expensive, no longer competitive with the Stratocaster, and by 1961 Gibson stopped producing the traditional Les Paul in favor of a lighter redesign called the SG. The mid-1960s, however, brought a resurgence of interest in the Les Paul, a development credited to one man and one album: Eric Clapton, using a Les Paul plugged into a Marshall Bluesbreaker amplifier as recorded on Blues Breakers with Eric Clapton (the “Beano” album, 1966), set the standard for tone for a new generation of guitar players in blues and rock and roll (see Keith Richards’ contribution to the Les Paul legend below in the section ‘Renewed interest in the Les Paul models’ below).  Clapton was initially followed by American guitarist Michael Bloomfield and British guitarist Peter Green, and the subsequent rise in the instrument’s popularity was such that by the late 1960s Gibson reintroduced an updated Les Paul and a variety of other instruments “in its mold”, including a bass guitar.
Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.
A 5 way selector is commonly found on guitars with 3 pickups , a humbucker in the bridge , single coil in the middle and a humbucker in the neck. So the 5 way selectors job is to select only one or more pickups at a time to offer different sounds on the guitar. The way the selector is pointed will tell you which pickup is selected and this is common on guitars from all brands. The bottom position is your bridge pickup which is closest to where the strings begin , the middle position is all 3 pickups and the top position closest to the neck is your ....you guessed it neck pickup. The bridge pickup will offer heavier sounds if you play the right notes and the neck for soloing as the output (intensity) of the neck pickup isn't as powerful as the neck for a reason. The more you play the more you'll see uses for switching pickups on the selector. The tone knob on the other hand it depends on how you use it I know a lot of guys who are endorsed and so forth who never touch the tone knob or have guitars built without it , but used properly it can do a lot of stuff from Eric Clapton to Carlos Santana type stuff. you will also see a 5 way selector on guitars with two humbuckers this feature is called a mega or super switch depending on brand. It makes the pickups do different stuff but this feature is usually found on expensive guitars and keep in mind a 3 way blade switch looks like one but only goes in three positions. Bridge , middle and neck.
The guitarist and composer Francisco Tárrega (b. Vilareal, Spain in November 29, 1852-d. December 15, 1909) was one of the great guitar virtuosos and teachers and is considered the father of modern classical guitar playing. As professor of guitar at the conservatories of Madrid and Barcelona, he defined many elements of the modern classical technique and elevated the importance of the guitar in the classical music tradition.
Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
Breedlove is a semi-recently founded guitar manufacturer that has a main focus of acoustic guitars. Breedlove doesn’t have a massive following like some other brands, so it can be difficult trying to find one to test before purchasing. Breedlove tends to evolve their guitars and tries to push the world of acoustic guitars forward. Their Oregon Concerto Myrtlewood acoustic, for example, manages to produce a big, refined sound and the notes are more resonant. This is due to their tapered myrtlewood body and smaller sound-hole. The body shape is also very important as it’s part of the reason they sound so good and it’s even comfortable to play. All of their guitars are very high-quality and work well for all fingering styles and genres of music. If you want a really great acoustic, you really can’t go wrong with Breedlove.
Cort Guitars is known as a South Korean centered guitar manufacturing brand, which provide almost all kinds of guitars for the better music melodies and tunes. They are regarded as among the largest manufacturer of guitars in the world. The company was founded in 1973. Bass, electric and acoustic guitars are produced by this brand. The best models of guitar includes Classic Rock, Aero Series, Hollowbody series, VL, Performer, G series etc. Available price is Rs. 10,449/- onwards (approx). For further information, visit www.cortguitars.com.
Where do you people get off not even mentioning BC Rich. They have a fine selection of Guitars, they use some of the best woods you can ask for, very good electronics, and Kerry King of Slayer fame will only play BC Rich, that in itself should be enough said. On top of that the body styles that they have to choose from is far more innovative and original than anything that Ibanez could ever dream of producing. Fender and Gibson are in fact the most well known guitars in the world but frankly the body styles are outdated and worn. They believe in staying with what works but wheres the originality? Im sorry if I offend but BC Rich til death. I have never seen anyone come up with anything as wild and as evil looking as the worlock models. I mean the nickname for a guitar is an axe but so far only BC Rich guitwrs look like somthing you can take into battle, and the sound is like the very voice of Satan himself. And shame on you all to forget about Dean Guitars, They were used and endorsed by the God of Metal shreddiing himself Dimebag Darrell Abbott. The man died on stage with one in his hands. RIP Brotger and Goddspeed. give repect where respect is due.
Of course, as guitar players we still want to remain open to a number of tonal aspects that happen after the front end of the initial attack. These elements aren’t necessarily in the front part of the very beginning of a guitar tone, nor are they delegated to the trail of lingering sustain. “The reason why people sound a certain way is because of little nuances, those little pull offs, those hammer ons, those plucking [dynamics]— the sequence of those things. Think of it as a sonic palette. That sequence is what makes the artist sound like himself.”
A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.
Fortunately I did some research, performed some trial and error experimentation on my own semi-hollow (a very nice Epiphone Dot) and found what I consider to be the best way to wire up a hollow body guitar. You won’t need any uncommon tools or equipment – just a wrench set (or an adjustable wrench), plenty of wire, a pair of needle-nose pliers, a soldering iron, and a bit of patience. I’ve included plenty of pics to help illustrate each step.
The trust you place in a guitar master's steady hand, keen mind and eye for detail when you hand him your baby is almost too much to bear. It's more hope than faith. For you need someone who's knowledgeable, but not just book smart. A guitar master needs to know more than just how to solder the yellow and green wires together, glue a new bridge and replace a few strings. He must know its rhythm, that steady beat pulsing through the wood.
Some bass amplifier combos have a "whizzer cone" attached to the low frequency woofer's centre. The whizzer cone is about the same size as a dust cap, although it resembles a miniature speaker cone. The whizzer cone handles the upper frequencies that are too high for the woofer. Roland's 60 watt and 120 watt bass combos contain both a woofer and a whizzer cone.
Dont buy too cheap. The cheaper the guitar, the harder to play and the less quality the sound. You want a rewarding feel and sound or you will get discouraged. Buy a better guitar used than a new one cheap. Are you going to learn chords or fingerpicking ? Some guitars are better sounding for one than the other. Some like Taylors are versatile and provide good sound for both. Be smart. Good luck.
Copyright © 1996-2018 American Musical Supply, Inc. All rights reserved. American Musical Supply reserves the right to correct pricing and/or product specifications in the event of typographical errors found in our print catalog or on our website. If a product is listed at an incorrect price due to such errors or because of inaccurate information received from a supplier, American Musical Supply shall have the right to refuse or cancel any orders placed, whether or not the order has been confirmed and your credit card charged. If your credit card has already been charged for the purchase and your order is canceled, American Musical Supply will issue a credit to your credit card account in the amount of the charge.
GUITAR RIG 5 PLAYER is the free, modular and expandable effects processor from Native Instruments, combining creative effects routing possibilities with ease-of-use and pristine sound quality. The included FACTORY SELECTION library provides one stunning amp with 17 cabinet emulations, plus 13 effects and sound modifiers to shape and enhance any audio signal.
The Fender Mustang I V2 Guitar Amplifier Combo also features USB connectivity allowing you to hook it up to your computer or DAW software for easy recording. If you don’t already have a DAW, you can utilise the free downloads of Fender FUSE and Ableton Live software suites to create your own music and take advantage of all the great features within the amplifier when recording. An intuitive, easy to use control panel allows you to see and change your sounds and footswitch connectivity (sold separately) ensures you can have complete control without the need for a pedalboard. A fantastic amplifier for beginners and players of all levels.
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
If you decide to choose a guitar, amplifier and accessories separately, consider spending more on the guitar than the amplifier. A better guitar will often suit a player’s needs longer, and a less expensive amp will be fine for early practicing sessions. If the player decides to upgrade down the road, often they may only need to upgrade the amplifier and not their entire setup.
Several years after his last adventure, retired fortune hunter, Nathan Drake, is forced back into the world of thieves. With the stakes much more personal, Drake embarks on a globe-trotting journey in pursuit of a historical conspiracy behind a fabled pirate treasure. His greatest adventure will test his physical limits, his resolve, and ultimately what he's willing to sacrifice to save the ones he loves.
Two easily overdriven cathode-bias 6V6 output tubes deliver a sweet, harmonically rich tone, and the 5Y3 tube rectifier has the sag required for dynamics and touch sensitivity. This holy grail of vintage combos has been used by Neil Young, Mike Campbell, Rich Robinson, Mark Knopfler, Billy Gibbons, and countless others. If you can’t afford the original, more-affordable reproductions are available from Victoria, Kendrick and Clark Amplification, to name a few.
This is the point where the neck meets the body. In the traditional Spanish neck joint the neck and block are one piece with the sides inserted into slots cut in the block. Other necks are built separately and joined to the body either with a dovetail joint, mortise or flush joint. These joints are usually glued and can be reinforced with mechanical fasteners. Recently many manufacturers use bolt on fasteners. Bolt on neck joints were once associated only with less expensive instruments but now some top manufacturers and hand builders are using variations of this method. Some people believed that the Spanish style one piece neck/block and glued dovetail necks have better sustain, but testing has failed to confirm this. While most traditional Spanish style builders use the one piece neck/heel block, Fleta, a prominent Spanish builder, used a dovetail joint due to the influence of his early training in violin making. One reason for the introduction of the mechanical joints was to make it easier to repair necks. This is more of a problem with steel string guitars than with nylon strings, which have about half the string tension. This is why nylon string guitars often don't include a truss rod either.
• Gotta Feel It: Ultimately, what feels right under your fingers and sounds right coming out of your rig should determine your strings. It’s important to try different brands before zeroing in on a favorite. Judge a new set of strings by its brightness, sustain, tone and how easily they permit bending, fretting and picking. When a brand and gauge feel like buttah and sing like Circe, that’s the zone.
There are a couple of tricks you can try. One is to get an allen key wrench that is SLIGHTLY too large and take a small file to it to taper all six sides slightly. The other trick, which I use sometimes on Stratocaster saddle height screws, is to use a suitably-sized Torx wrench. They're already tapered, and since they're six-sided-star shaped, they grip the corners really well, even if there's a bit of crud stuck in the screw.
This comment is directed towards the video of the gentleman changing guitar strings. I have an LP Junior, so I don't thread my strings through the guitar body. But I'm curious why he is turning the guitar completely over, flipping the guitar towards himself each time when he could in fact just lean the guitar away from himself, leaving the back of the guitar facing him? I know that seems a bit nit picky, but it would be tremendously more efficient just leaving the guitar on its side with less risk of the string damaging the guitar surface. Any thoughts or am I just missing something?
OM-42PS: Paul Simon’s signature acoustic model (manufactured in the 1997 model year) is based on the OM-42, which had not been manufactured since 1930. Alterations were specifically requested by Simon himself. From the original planned run of approximately 500, only 223 were produced, making these a collector’s item. A standard version of the OM-42 is in the current range.
Ok, whoever downvoted me needs to explain their reasoning, since I clearly laid out my reasoning. The person said they're interested in punk/rock/experimental, and there's no possible way you can tell me that a multi-fx pedal is better than a Big Muff and/or a DD3 delay. I will laugh in your face and point if you suggest such a thing. You could get both pedals for the price of any multi effect pedal, they hold their value, and they sound great. If you don't like a Muff, whatever, swap it out for a Rat. – Dan Gayle Aug 1 '14 at 17:39
First introduced as a 35th Anniversary Edition Guitar in 2009, it joined Taylor’s standard line up as a Specialty Model in 2010. The Baritone model features a Grand Symphony body and a longer 27-inch scale length which enables it to be tuned from B to B while maintaining normal string tension. It comes in either 6-string or 8-string option. The 8-string models incorporates a pair of octave strings that double the 3rd and 4th (D and A) strings. Solid wood back and sides available for the Baritone model are Tropical mahogany or Indian Rosewood with rosewood binding and an abalone rosette.
Australia’s best known guitarist, Tommy Emmanuel, owns many Matons and almost exclusively uses the BG808 acoustic model on his latest albums. Maton has even constructed a Tommy Emmanuel “TE series” according to Tommy’s specifications. His understudy Kieran Murphy also uses Matons. Joe Robinsonplays Maton guitars and was the company’s featured performer at the Frankfurt Musikmesse in 2009.
Fished around here on Amazon and ordered two of these Sky guitars instead. With the shipping and import taxes they still came out costing less than the plastic toy junk. The girls were predictably overwhelmed. What's a 5- or 7-yo going to do with something like this? These are in fact real electric guitars. They are substantially constructed and while they may not have the level fittings you'd see on a professional's expensive Fender or Gibson, they work well. The little amplifier is not strong and distorts at high volume but it too works well at modest volume levels. Although it is not included, there is provision for connecting a 9v AC adapter which you'll want to get as even this somewhat weak amp will go through a 9v battery pretty quickly.
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.
Sturdily constructed with a solid basswood body, bolted maple neck and rosewood fretboard, this black electric guitar has an attractive glossy finish. The list of add-ons include a high quality Hollinger BC-08 practice Amplifier (10 Amp), string-winder cable, strap, gig bag and pitch-pipe picks. The intonation as well as playability of the Davison full size electric guitar has been enhanced owing to its single, high quality humbucker pickup, chrome bridge system and diecast tuners. Last but not the least, the practice amp is suitably equipped with a headphones jack for noise-free practice sessions, as well as an overdrive mode for cool distortions!
I’m assuming rock guitar players so i’d say Jimi Hendrix, (I don’t personally like him but just about everyone else does) a good album of his would be “Are You Experienced?” or “Electric Ladyland”. Eric Clapton’s good stuff would be his records with Cream, mainly “Wheels Of Fire”. Van Halen’s first album (Just titled” Van Halen”.) Then Led Zeppelin 1, Led Zeppelin 2, and Led Zeppelin 4. A good Rush album would be nice too, either “Moving Pictures” or “Permanent Waves”. You might not see this but you should make sure he doesn’t have any of these yet and that he’ll like them.
The solid body electric guitar is the most common body type and is made from a solid slab of wood. Solid body guitars can range from a simple, single-pickup model, to an ornately figured and decorated, multi-pickup instrument with a slew of electronic options. Although solid-body guitars don’t produce as much resonance as hollow-body models, the woods used still have an impact on the instrument’s sound.
On Martin guitars, this is a really big deal. Martins all seem to have a problem with the "neck set" on many of their guitars before 1970. High string action is the result, making the guitar very difficult to play. This can only be fixed correctly by a "neck set" (removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action). If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.
Some guitars have a fixed bridge (3.4). Others have a spring-loaded hinged bridge called a vibrato bar, tremolo bar, or whammy bar, which lets players bend notes or chords up or down in pitch or perform a vibrato embellishment. A plastic pickguard on some guitars protects the body from scratches or covers the control cavity, which holds most of the wiring. The degree to which the choice of woods and other materials in the solid-guitar body (3) affects the sonic character of the amplified signal is disputed. Many believe it is highly significant, while others think the difference between woods is subtle. In acoustic and archtop guitars, wood choices more clearly affect tone.