Some large combo amps and large speaker cabinets have ball-bearing-mounted caster wheels to make it easier to move them. All combo amplifiers and speaker cabinets have some types of carry handles, either a folding handle on the top or recessed handles on the sides. There are two types of recessed handles: some equipment has folding, spring-loaded metal handles, with the spring holding the handle flush against the chassis until it is pulled out for use; the second type is handles that are non-moving, and which are flush with the surface of the amp/cab, but with a hollow area behind the handle for the hand to go. In both cases, the handle does not project out beyond the amp/cab, preventing the handle from catching on items during transportation and/or being damaged.
A free, guided tour of the Taylor Guitars factory is given every Monday through Friday at 1 p.m. (excluding holidays). Taylor’s expansive 145,000 square foot manufacturing facility is located east of San Diego (about 20 minutes from the downtown area) in El Cajon, California. No reservations are necessary for the tour, although the company asks that large groups (more than 10) call in advance at (619) 258-1207. Taylor encourages guests to arrive at its Visitor Center, where the tour begins, 10-15 minutes prior to tour time to sign in at the reception desk. The tour lasts approximately one hour and 15 minutes. While not physically demanding, it does include a fair amount of walking.
Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.

I'll be referring to a lot of different producers in this article, and it's understandable that you may not have initially heard of some of them, even if you've probably heard some of their productions. To avoid an avalanche of parentheses, I've put a list of all the producers I mention into a box which runs across the bottom of this article. The box also includes a few of their most celebrated credits, so that you can have some idea of where each of them is coming from stylistically.
I bought my Norma accoustic in 1971 from a lady dealer who bought-out other stores going out of business. I paid $50. for guitar,case and strings. Best $50. I`ve ever spent. The sound gets better everyday. I have played the local market a lot, and fronted a Jamboree stage for 12 years (did the microphone work and sang), where I saw many a performer and their guitars come and go. Everyone was envious of my good sounding guitar. I applied a Dean Markeley electric pickup into the round hole and "wow" what a sound. Wouldnt take nothing for it. I own 7 accoustics,4 ele and three ele bass` guitars. I take my Norma everywhere. I am in the Georgia Music Hall of Fame and get lots of opportunities.
One of the most respected guitar manufacturers in the world, Epiphone electric guitars can be found everywhere from small-town basements to the biggest arena rock stages. The reason is because of their dedication to providing high-quality instruments for musicians of all tastes and skill levels, and throughout this catalog you'll find more than enough choices to prove it. After all, everyone who has a desire to crank up and play deserves an electric guitar that looks, sounds, and performs flawless, and Epiphone has an option for every budget. It's easy to see how trusted the Epiphone name is when you consider how many best sellers and top-rated items make up this section. For that matter, all you have to do is look at the many top-recording artists who have Epiphone signature models, including metal legend Zakk Wylde, virtuoso Gary Clark, Jr., and Tommy Thayer of Kiss. Speaking of signature guitars, check out the popular Limited Edition 2014 Joe Bonamassa Les Paul Standard Electric Guitar. Sporting a gorgeous Pelham Blue with a black back and a Bonamassa neck profile, this axe looks as slick as it plays. As for its sound? You can expect plenty of power in every chord you hit thanks to the Gibson USA BurstBucker-2/3 humbuckers. Now for those who prefer the lightweight feel and ringing sound of a semi-hollow, go with the Dot Electric Guitar. Equipped with dual humbuckers and a 3-way pickup selector, the Dot can go from growling snarls to crystal-clear sustain. Additionally, the two volume tone controls allow you to tailor your sound, while the smooth, 22-fret rosewood fretboard means you can play at lightning-fast speed. And this is only a taste of what Epiphone has in store for you. In fact, taking a tour through Epiphone's extensive selection of electric guitars is just as fun as playing them. From solid body electrics and hollow bodies to semi-hollows and even guitars for left-handers, the options are seemingly endless. So stick with Epiphone, and you'll have no problem finding an instrument that reflects your own discerning style.
In late 2012 I decided that I had all the modern guitars I needed. I’m not gigging much, just writing and recording. There were a couple of vintage guitars I was interested in. A Vox teardrop, especially the Mark IX, and the Fender Coronado. The Voxs turned out to be too expensive for me, especially the Mark IX, which was a 9-string beast meant to sound similar to a 12-string. Those are very rare and priced out of my range. The Coronado, I might be able to afford one day, but I’m not as interested as I was. The new reissues sell for about $700, but they’re different from the originals in several important ways.
{ "thumbImageID": "FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst/L00658000003000", "defaultDisplayName": "Fender FA-135CE Concert Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000204613", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst-1500000204613.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-3-Color-Sunburst/L00658000003000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000204612", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-Natural-1500000204612.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-Natural/L00658000002000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000204611", "price": "169.99", "regularPrice": "199.99", "msrpPrice": "200.01", "priceVisibility": "1", "skuUrl": "/Fender/FA-135CE-Concert-Acoustic-Electric-Guitar-Black-1500000204611.gc", "skuImageId": "FA-135CE-Concert-Acoustic-Electric-Guitar-Black/L00658000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
Preamp, or gain, controls (sometimes called “volume” on master volume–equipped amps) let you dial in impressive-sounding distortion at low volumes, but excessive preamp distortion can sound too compressed and sizzling at high volumes. Turn down the gain and crank up the master volume until the amp is set at the output level you’d normally play at. Now, slowly increase the gain until the sound becomes as distorted as you want it to be. If the tone is buzzy and lacks dynamics, the amp will have all the onstage presence of an American Idol reject.
The Special 20 (#560) was introduced in the mid 1970s. It has the same reeds as a Marine Band, but it has a plastic comb instead of a wooden comb, and rounded edges. It was the first Hohner harmonica to have a plastic comb, which not only made the instrument more airtight, but also eliminated the swelling wood combs go through as they moisten from use. Made in Germany, this model quickly became the preferred choice of many rock and blues players. Now, most harmonicas being manufactured from all companies are based upon the Special 20. Its most noted user is John Popper, who appears on the blister.[10] Like the 1896, the Special 20 also has tuning variations available, like the #560C in country styled tuning, and the #560N in natural minor.[11]
Epiphone Zakk Wylde Les Paul Custom Plus Bullseye Solidbody Electric Guitar at a Glance: Loaded with Zakk's blazing-hot custom EMG active humbuckers Totally solid mahogany body and hard maple neck deliver freakish sustain Premium hardware put this Les Paul in a class all of its own Loaded with Zakk's blazing-hot custom EMG active humbuckers Turn up the heat with a pair of the most outrageously amp ...

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue

Updated! Now has complete information on how to set up a guitar with a tremolo bar including the Floyd Rose Tremolo System. A complete step-by-step guide to maintenance and setup of your electric guitar. This guide, packed with images, will show every aspect of essential electric guitar care such as changing the strings, adjusting the neck, and setting the action to match your playing style. It will also show you how to fix common electric guitar problems such as buzzing strings, scratchy pots and much more. Electric Guitar Repair and Maintenance is a great resource for any guitar owner. Now at a lower price!
Next popular guitar brands are Gibson Corporation which deals with highly appreciated guitars. It is increasing growing day by day due to its innovative characteristics and awesome product quality. If you are looking for high quality guitar at higher price, then go for Gibson Acoustic Guitar which will fulfill both the requirements. There prices are starting from Rs 49,000 in market.

George Delmetia Beauchamp is just as important as Leo Fender and Les Paul. His name may not ring a bell, but Beauchamp designed the first fully functional guitar pickup and secured a US patent for the electric guitar in 1937. The pickup, which converts string vibrations into amplifiable electrical signals, makes an electric guitar what it is; without one, there is no electric guitar. Beauchamp was also a founder of the popular Rickenbacker guitar brand alongside his friend and business partner Adolph Rickenbacker. Rickenbackers were often seen in use by both John Lennon and Paul McCartney in the era of the Beatles, also a go-to guitar for the classic rock sound of bands including the Who, the Eagles and Steppenwolf.
Most guitars have at least one tone control installed. They can be either assigned to a particular pickup (Strat or Les Paul) or work as master tone control (Ibanez and others). Electronically, it’s a variable low-pass filter. Lower the resistance, more treble gets cut which means that higher pot values will sound a bit brighter (typically 500K vs 250K). Capacitor values usually traditionally range from 0.022uF (22nF) to 0.047uF (47nF) but many people find these values too large and install much smaller caps instead. Values of 10nF, 6.8nF or even smaller are reported to work quite well (I used 10nF in my latest mod). To help you decide between cap values and composition, check out this site. It hosts a couple of useful videos with cap value and composition analysis.
im from the phillipines and there are a lot of japanese acoustic guitars here but when i try researching some obscure brands i cant seem to find any information on them. the brands i cant seem to find anything are "koga" (different headstock logo from the ones i found online), "jumbo" and "jaxon". hopefully you can help me get some info on these brands? thanks! :)
If you wanted to quantify what is meant by "best," which you really should, then we actually would need to consider the specifications of guitars in the given price range. Although there may be differences of personal preference when it comes to areas such as individual tone woods used, fretboard scale, and nut width, we could still make very good general assumptions about whether laminates are better than a solid wood model, whether synthetic fretboard material was favorable to natural wood, whether one pickup is better than two, and/or whether including a built-in tuner is preferable. In other words, Forget about the names of the manufacturers and do a real comparison of specifications of guitars in the given price range.
Fujigen Gakki is a musical instrument maker located in Matsumoto, Japan. They began making violins and classical guitars in 1960 and electric guitars in 1962. Their real heyday of guitar production began in the 1970’s when they began producing guitars for major American manufacturers like Fender and Gibson as well as some Japanese manufacturers. In fact, after CBS acquired Fender Electronic Instruments Company they decided to move to larger manufacturing facilities. Between the closing of the old factory and the opening of the new one, the only Fender guitars being made came from the Fujigen Gakki factory. Other factories have been used to manufacture Fender guitars, some for the Japanese market only. Regardless, Fenders made in Japan are considered top-quality.
The Seismic Audio SADIYG-02 is based on the iconic Telecaster electric guitar. It comes with a single-cutaway body that's crafted from paulownia, a China native wood that's known for being light. The pickguard is already set into the body when you get the package, but you'll need to solder the input jack, the volume and tone knobs, the bridge pickup and the selector switch before you start using it.

I’m super excited for this post as it’s the culmination of some of the biggest names in online guitar lesson providers coming together to offer their advice and insights on guitar chords. Understanding the right way to play guitar chords is one of the first things you’ll learn as a beginner guitar player. It can also be quite frustrating when you are just starting out.That’s why I decided it would be a great idea to get a bunch of experts together all giving their insight into learning more about the wonderful world of guitar chords. I basically asked everyone two questions:

You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc.
When it comes to its dimensions, all interested buyers should know that it is quite sizeable on the exterior (the unit has the following external measurements 40″ length x 12″ (upper bout)/ 15″ (lower bout) width x 3″ height). Likewise, the bag is quite spacious on the inside (39.5″ length x 12″ (upper bout)/ 14.5″ (lower bout) width and 2.5″ in height).
McCarthy's probably one of the toughest guitar masters on this list. His craftsman's hands know not only how to help your instrument make magic again but also (we assume) how to put you in an arm or leg lock and make you scream "Uncle" if you mouth off too much about your guitar's condition. It's probably why guitar tough guys like Zakk Wylde of Ozzy Osborne and Black Label Society, Izzy Stradlin of Guns 'n' Roses and Jason Newsted of Metallica gravitate toward his repair shop. (Not to mention the guys of Motorhead). They know they're dealing with a true master.

Pickups and body styles are just scratching the surface when it comes to guitar features. No matter how overwhelming things may seem, though, if you’re only a novice or hobbyist there’s no need in fretting (get it?) over every single feature. Instead, look to the features we mentioned and go from there based on what type of music you want to play. If you’re a big blues and classic rock guy, powerful, full sound is necessary: you’ll likely want a semi-hollow or solid body guitar with humbuckers or P90s. Want to play old school country or folk? Check out hollow bodies. Are you a fan of alternative and punk? Consider a thin solid body with single coil pickups.
You don’t have a single Guild in your list, but you have Washburns that totally lack any sort of bass response. In fact, I’ve never understood how Washburn could take perfectly good materials like sitka spruce and mahogany, and produce such inferior guitars. You list the Fender fa-100 and stratacoustic, both firewood as far as I’m concerned, but don’t list the outstanding Alvarez AD60 and AD70, two amazing sounding guitars for the money. The Hohner and Oscar Schmidt OG2 are beginner guitars, but I know a lot of people with Yamaha FG800 and FG830 guitars who would be very offended by you saying one of their favorite guitars is for beginners. They are serious instruments, even if they only carry a sub-$300 price tag. They are certainly better sounding than that Taylor Big Baby thing, which I was shocked to hear at GC. Talk about over-rated. But you did get many things right. You gave the Blueridge d160 high marks, though I think the D140 should have been up there, too. Good to see that you gave the FG800 such high marks, but I actually like the FS800 a little better. It’s easier to play and better for fingerpicking. The Ami, Jim Dandy, and Recording King are all over-rated and over-priced. You need to take the Washburns down and put up the Guild M-120, D-120, and D-150. The D-150 may be the best guitar you can buy for under a grand.
Hopefully, that explains the basic components and tools. As mentioned guitar electronics can be a little daunting and my best advice if new to guitar electronics is to avoid seeking out information on guitar related forums as you may leave your head spinning, feeling more daunted than you did in the first place. We will cover the basics here and in most cases that will be more than enough to help you put together a great guitar.
So much has changed since our last refresh – where do we begin! First we answered some common questions that you might have. Then we reviewed our top ten chart and individual categories, and removed several older models including the Gibson Les Paul Faded T 2017, Epiphone’s G-310 SG, and the ESP MH-50. We added many others including one of the greatest guitars ever made, the Ernie Ball Music Man John Petrucci Majesty Monarchy, the premium Fender Eric Clapton Stratocaster, the Yamaha RevStar RS420 and Mark Holcomb’s signature PRS MHHB2 SE.
As to the “where,” positioning your mic an inch or less from the grillecloth and aiming it straight at the center of the speaker cone – pointing at the dust cap, in other words – yields a bright, punchy, detailed sound that suits many requirements, but can be too harsh. At the other extreme, aiming the mic at the edge of the cone, where the cone meets the suspension (the area just inside the speaker cutout in the cab’s mounting baffle) usually results in a looser, warmer, more raw and edgy tone. Between these two positions, there’s a wealth of voices to explore, and every inch of real estate that the mic covers between dust cap and cone edge will bring a noticeable sonic shift, without touching the amp’s controls. Also, aiming the mic straight at the speaker, in other words, mounted at 90 degrees to the flat plane of the front of the amp, and aiming it off axis, at a slight angle to the speaker, will illicit different sounds, too. With an assistant helping, or the guitarist playing if that’s not you, try moving the mic around the surface of the speaker while listening for the changes in tone through monitors or headphones, or if you don’t have enough isolation between live amp and monitors, record a little in each of several positions to listen back to. Pick the position you like for the track, and go with it.
The obvious first step is too loosen the truss rod, however, after inspection I learn the truss rod is already completely loose. In order to straighten the neck we opt for a heavier gauge string which places more tension on the neck, pulling it straight. The heavier gauge is necessary to render the neck flat, without it string buzz is overwhelming.
Martin’s first era of flirtation with electrics ended with its GTs, and, in terms of American production, wouldn’t resume until a decade later. However, in 1970 Martin joined the growing list of American manufacturers to begin importing guitars made in Japan, introducing its Sigma series. In around 1973, Martin, like competitors Guild and Gibson, began importing a line of Sigma solidbody electrics made in Japan by Tokai.
You can get an entirely new perspective of the fretboard by starting from the C-A-G-E and D chords. This book can help create a roadmap for the guitar, where you'll be able to know each fret's note name - one of the most important things to learn when playing. If you're unsure about learning this system, do a search for the CAGED system on YouTube and see if it's something you'd be interested in.
Stratocasters also feature tremolo systems, where the Les Paul, SG and Telecaster have fixed bridges. Epsecially in the budget price range, tuning is typically a little more stable for fixed-bridge guitars. If you really want a Strat with a tremolo it’s nothing to be super concerned about, but newbies should be aware of the difference. A good guitar tech at the local music store should be able to set your Strat up so it stays in tune just fine.
Nobody ever forgets their first guitar. It's an exciting moment that signifies the beginning of a life that's filled with musical enjoyment. For this reason, you need to be sure that the guitar you purchase is more than worthy of making your talents fully realized. And thankfully, there is no shortage of astounding guitar value packages to choose from, right here.
Very good working condition, this guitar is completely playable and in great condition. All electronics function properly without any issue. This guitar contains very minor cosmetic scuffs throughout, typical wear from a used guitar, nothing at all significant, please see pictures. The body, neck and headstock are all straight and contain zero cracks, bends, or bows. This guitar will come exactly as shown with soft gig bag.
Muddy Waters is obviously one of the most recognized and influential blues artists of this century. When his name is mentioned phrases like "slide guitar" and "electric Chicago blues" are associated with it, but what about "wah-wah" and "psychedelic"? For a small period in history, Muddy Waters' image became one of a psychedelic icon and if there weren't records still around from then, most people would doubt it had ever happened. The sixties were a strange time for music and musicians- none felt stranger than musicians from the previous decade trying to stay afloat then. Many times in music, established artists will try to expand upon their work and take a chance with something different. They should at least be praised and encouraged when they try to experiment with their sound. If music were condemned to always following a strict guideline of rules, it would be pretty boring. Music should be allowed to grow and explore new territories because everyone can agree that it's not exciting if it's always predictable.
An acoustic guitar suited to bluesy rhythms. Has quite alot of fret rattle with the high velocities but also a certain amount of mid to high frequencies which helps to give it its own place in a mix. Presets include a standard mapped guitar, a fake twelve string (octave harmonies on each key) and split voices of muted fifths at one end and solo guitar at the other end of the keyboard (for quickly creating tunes and ideas). There are other banks of the same presets except with long releases (for sustained notes), chorus and/or reverb added to give the different variations. The amount of reverb can be altered with cc12 and the amount of chorus can be altered with cc13. Reverb and chorus has to be enabled on your soundfont player to use them.
Morning everyone, well it is here in UK anyway. Who can help with my find. It's a Dia Hummingbird labelled F 315 but no serial number. So from what I can find Dia was a brand used by Matsumoku but I can only see electrics under Dia brand when I search. However it looks identical to a Aria F315 Hummingbird on eBay USA at present, and identical to an Aria Pro II from the 1976 catalogue but labelled W 30 model I believe. I won't put a link on here in case I'm breaking rules. It has that weird aluminium compensated bridge and seriously, this one looks brand new with two tiny dings that would make it a second or an ex-demo if it was on sale. Action at low E 12th is about 2.7mm and about 1.8 at high e. It's in such good condition I began to question if in fact it is a 'knock off of a knock off' though why anyone would think that would work I can't guess. It is very very playable, and at first I wasn't keen on the tone though sustain is great (despite bridge) but I changed to heavier strings (13) with much improvement. I'm seeing a luthier friend next week who is finishing off work on a brilliant Terada FW 613 (D18 clone if you like), but I'm wondering whether to get him to replace the whole alloy bridge. I can do a couple of pics if anyone is interested. Any help in identification of maybe year (guessing 1976) and origin greatly appreciated. I think it's a keeper, but should I change that bridge ? Has anyone done similar on one of these compensated aluminium designs and what were results. Many thanks.
Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
As opposed to the modeling amps and amp profilers already on the market, the Power Head doesn’t just offer a number of pre-set amp settings that would allow you to imitate the styles of famous guitarists (among many other things), but it can also copy the settings of other amps it is connected to, or let you load your own so that any particular style you’ve stumbled upon during a recording session can be re-rendered with crystal-clear accuracy when performing live.

Leo Fender’s simple and modular design was geared to mass production, and made servicing broken guitars easier. Guitars were not constructed individually, as in traditional luthiery. Rather, components were produced quickly and inexpensively in quantity and assembled into a guitar on an assembly line. The bodies were bandsawn and routed from slabs, rather than hand-carved individually, as with other guitars made at the time, such as Gibsons. Fender did not use the traditional glued-in neck, but rather a bolt-on. This not only made production easier, but allowed the neck to be quickly removed and serviced, or replaced entirely. In addition, the classic Telecaster neck was fashioned from a single piece of maple without a separate fingerboard, and the frets were slid directly into the side of the maple surface—a highly unorthodox approach in its day (guitars traditionally featured rosewood or ebonyfingerboards glued onto mahogany necks). The electronics were easily accessed for repair or replacement through a removable control plate, a great advantage over typical construction, in which the electronics could only be accessed through the soundholes in the case of hollow-body instruments, or by taking off the pickguard after removing the strings (in a design popularized by Fender’s own later guitar model, the Stratocaster).
Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD

Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks.

At the beginning of the Teisco saga, Teisco instruments were primarily built for domestic consumption in Japan. The early guitars were fairly high quality by contemporary Japanese standards. As the ’60s dawned, Teisco increasingly got caught up in the export market, and by the mid-’60s were major players in the low-end or beginner arena, with instruments sold primarily by mass merchandisers such as Sears and at discount department stores which were rapidly developing at the time. It was mainly in this latter niche that Teisco guitars are known in the U.S. In order to give this narrative some structure, I’ve divided the Teisco history into four basic periods: I-Gibsonia; II-Frumpy Fender-ama; III-A New Spectrum of Originality; and IV-Copydelia.
Beatles guitarist George Harrison bought a 425 during a brief visit to the USA in 1963.[7] In February 1964, while in New York City, F.C. Hall of Rickenbacker met with the band and their manager, and gave Harrison a model 360/12 (the second electric twelve-string built by Rickenbacker).[7] This instrument became a key part of the Beatles’ sound on their LP A Hard Day’s Night and other Beatles songs through late 1964. Harrison played this guitar sporadically throughout the remainder of his life.
The Effect: Bass guitars are the core of every band. Along with drums, they make the rhythm section. Because of this, bass players are seen as ‘background members’ in a band. With that said, bass guitar offers much more range than that. Following the footsteps of legends such as Lemmy Kilmister and others, we can see that bass guitar can be the star of the show. All you really need is a good distortion pedal. Finding one may prove to be trickier than it seems. Your average guitar dist pedal may work, but chances are you will get better results with something like Tech 21 RIP Red Ripper. This is adedicated dist box for bass guitar, which covers the low end segment of bass tone and gives you some advanced tone shaping options. A proper bass dist box can really make all the difference if you are looking for proper sound.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple - Neck Construction: U-Shape - Nut Width: 42mm - Fingerboard: Rosewood - Frets: 24, Jumbo - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Cutaway: Single - Hardware: LTD Tuners, Chrome, 2x Volume Control, 1x Tone Control, 3-Way Switch - Circuit Type: Passive - Pickups: ESP LH-150N/LH-150B - String Instrument Finish: Silver Sunburst
Guitar models currently include the Master Class, American Series, Oregon Series, Cascade series, Atlas series, Passport Plus, and Passport, as well as 12-string models and Bass models. The Voice series, reviewed by Guitar Player in 2012, was praised for the quality of construction and various innovative elements, including a “Tru-Voice Electronics System” which, according to Dave Hunter, “for live performance … comes closer to a seamless acoustic-to-amplified transition than virtually any other flat-top I’ve played.”[2]
A musician's pedalboard can be a cluttered place, with lots of stompboxes all competing for room, not to mention creating a virtual spaghetti of patch cables. Wouldn't it be nice to swap out some of those pedals in exchange for a single unit? Of course it would, and that's why multi effects pedals exist. With one of these babies at your feet, you'll have multiple pedals in one. That does more than just clean up the visual look of your effects loop - it also makes your pedals easier to manage and use, and if you're a beginner, you'll appreciate how much simpler it is to put together your board with the most common effects all gathered in one unit.
But the guitar store? They always remember me and treat me like a guest even if I'm not there to buy shit. Everyone there is a genuinely good dude. They're all honest too, which can be hard to find in this industry. I took my guitar in for a check up and they told me doing anything to it would be unnecessary. They could have easily charged me $80 for a set up and taken my guitar.

I am a giging, solo acoustic musician from Ohio, performing in Western NY, Buffalo. I only had Acoustic Electrics, 6 and 12 strings until I bought my first Godin A6 Ultra. (Acoustic and Electric Pick-ups). The A6 was impressive in it's own right, so I started looking at other Godin products, and ran into a 5th Ave Kingpin 1. Acoustically it was a 3 star, as I have a couple of Taylors and an Epiphone Masterbuilt that this guitar is no match for unplugged. HOWEVER !! This guitar was designed to be plugged in, and the Tone and ease of Play come shining through when the p90 is in the loop.
DIY Guitars is Australia’s home of the best guitar kits. We stock a large range of kits at great prices, which will be delivered to your door! Whether you’re looking to shred like a madman, or play some classical blues riffs, we have the guitar kit for you! We also stock high quality ColorTone guitar stains and plenty of guitar accessories to help make the perfect guitar to suit your needs.

Super nice guys! They were really helpful from the get go and didn't hover like a lot of shops do to try and make a sale. Found out the gentleman behind the counter was actually from back home in Ohio and we traded some stories. He then directed us to some great places to have lunch and even gave us tips on what airline to take on our next trips out. Will definitely visit again just for the atmosphere and friendliness of he staff.
Guitar effects pedals are a great way to get started with electronics. The simplest ones only require some basic skills to assemble. The few parts can be easily obtained, and the minimum of tools required can be purchased quite cheaply. Better still is the gratification from plugging it in for the first time and being able to incorporate a pedal that you made yourself into your music. With the skills you acquire, you can graduate from simple to more complex projects; maybe build an entire pedal board of your own effects. Your friends might ask you to build pedals for them too. What you learn can also be put to use with commercial pedals, as you will better understand how they work, and will be able to repair and hot rod old pedals. If you are interested in working at a repair shop, as a guitar tech, or for an electronics company in the future, your portfolio of home built pedals will be a great advertisement for your skills.
The traditional method of getting the sound of the guitar to an audience is to place a Shure SM57® in front of the speaker on the amp’s cabinet. While this certainly sounds awesome and is a tried-and-true method for most applications, the advent of personal monitoring systems like Shure’s PSM 900® led to guitarists being dissatisfied with the sound they were hearing in their in-ears. With the microphone method you are hearing the microphone, not necessarily the amp. This reality was the inspiration behind the creation of the Radial JDX 48™.

The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.
Small amps can benefit from being placed on a stand, rather than the floor, as reflections from the floor can muddy the sound. A stool or something similar will do if a stand isn’t available. For the same reason, when using larger stacks or combos with several speakers, try mic’ing one that’s furthest from the floor. Placing an amp against a wall will increase the bottom-end response, and placing it in a corner will emphasise the low end further still. A mellow tone can be achieved by pointing the amp into the corner and mic’ing from behind.
In this lesson we will study Tennessee Stud as performed by Doc Watson. The tune has a great bluegrass type intro that repeats throughout the song. It applies many of the basic bluegrass principles we have discussed in the Bluegrass Genre section. The chords used are not difficult, however the timing and arrangement are a little tricky. Best to learn a section at a time.
The output of the rails is a crunchy, high sustain rock tone that turns your Strat into a much heavier and hard-hitting instrument. The pickguard, pots and five-way volume selector are all included with the wiring taken care of. It’s also really easy to change pickups using a solderless method that allows you to remove and add pickups by simply using screws.
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.
I have a Mahar bass, the one with the epic (haha) zebra stripes. My wife won it at the state fair in Puyallup throwing balloons or something. She thought it would be cute to have it in my collection. I'm a drummer, but I don't want to miss out on the fun of collecting guitars, why should guitarists have all the fun? Anyway, about the Mahar guitar... it's actually not bad! I pick it up and play it once in a while just for giggles, and have had bass players jam on it. They agree. For throwing some balloons, it's a bargain! Plug it into a decent rig and it doesn't sound bad either. I suppose if you are a virtuoso it would be notable if you had issues with it, but for fun and games it really is better than a toy, like First Act or some junk like that. If you are a beginner, this would be ideal. It plays nicely, and sounds as good as your rig can make it sound. Thumbs up!
Another acoustic guitar. This one sounds nice for fingerpicking arrangements and in general has a steadier sound than the Ibanez. If I had to choose just one of the guitars it would be this one. This one has a much rounder and fuller sound than the Ibanez. Both guitars go well together as they have different sounds to each other. This sound font also has the same presets as the one above.
Luthier Steve Lamb has been providing quality instrument repair in Fort Worth for over 30 years. Steve’s years of experience has provided musicians, collectors, students and friends the information and service necessary to keep their instruments in shape. Lamb’s Music is an authorized service/warranty center for most guitar manufacturers including – Fender, Gibson, Martin, Taylor and more.
Yes, he wears a KFC bucket on his head and a Michael Myers mask on his face, but he's a genius. Buckethead (real name Brian Carroll) plays every style, from country to death metal. Albums like 'Monsters and Robots' and 'Population Override' are must-haves for any aspiring guitarists, and instrumentals like 'Nottingham Lace' and 'Too Many Humans' take some beating. - Floods
what cha got yourself there partner is an awsome guitar! if you dont like the headstock you should have got the exact same but with the strat headstock and their cheaper! or you could change the neck to a blank headstock and there is a guy on ebay that will print you out a vinal sticker for it or if you have the cash get a fender neck and let people think its a fender!
ACT TRMOLO REPLACING THE STRINGS ACT tremolo allow two styles of string installation. 1) The strings are installed by putting the ball end into the string slot and hooking the ball end below the string catch at the rear of the tremolo unit. 2) The strings are installed by putting the ball end into the string slot and hooking the ball end in the string catch at the bottom of the tremolo unit.

The Fender T-Bucket 300 is a cutaway dreadnought guitar that comes with a stylish design and an incorporated pickup system for easy amplification. This instrument comes with a laminated maple top that features a Trans Cherry Burst finish. With quarter-sawn scalloped X-bracing, this guitar offers superior resonance and playability even as time goes by.
Very well cared for electric guitar.  Very light with a good tone provided by the maple neck and mahogany body. The S520EX features a thin, sculpted mahogany body bolted to a maple Wizard II neck with a 22-fret rosewood fingerboard with binding and claw scratch inlays only at the twelfth fret. Components include a pair of Ibanez Infinity covered humbucking pickups and a ZR ball-bearing pivot double locking tremolo bridge with a ZPS2 tuning stabilizer.
Here we ( SOLD ) are very proud to offer a USA built Martin Acoustic electric the model # JC-16RGTe.... More info soon to come and more pics as well... near mint condition like new! Everyone from Eric Clapton to Sting to Johnny Lang has played a Martin guitar, and professionals and amateurs alike know the bright sparkle and deep, resonant tone that Martin guitars have become famous for, from the most high end acoustics to the Backpacker. Carefully hand-selected tonewoods, master craftsmanship and beautiful finishes and styles make Martin acoustics a class all their own, and must be played to be believed. Martin sets the standard for acoustic guitars, and since 1833 has been a leader in guitar innovation and craftsmanship. The following info is from Martin. Martin JC16RGTE Features: * CONSTRUCTION: 1 Style; Ply Blocks; Mortise/Tenon Neck Joint * BODY SIZE: D-14 Fret CUTAWAY * TOP: Solid Sitka Spruce * ROSETTE: Bold Herringbone * TOP BRACING PATTERN: D1 Hybrid * TOP BRACES: 1 Style/Scalloped * BACK MATERIAL: Solid East Indian Rosewood * SIDE MATERIAL: Solid East Indian Rosewood * ENDPIECE: White Boltaron® * ENDPIECE INLAY: Black/White Boltaron® * BINDING: White Boltaron® * TOP INLAY STYLE: Multiple Black/White * NECK MATERIAL: Solid Spanish Cedar * NECK SHAPE: Modified Low Oval * NUT MATERIAL: White Corian® * HEADSTOCK: Solid/6 String No Diamond/Standard Taper * HEADPLATE: Solid East Indian Rosewood/ Raised Gold Foil Logo * HEELCAP: Solid East Indian Rosewood * FINGERBOARD MATERIAL: Black Micarta® * SCALE LENGTH: 25.4" * # OF FRETS CLEAR: 14 * # OF FRETS TOTAL: 20 * FINGERBOARD WIDTH AT NUT: 1 11/16" * FINGERBOARD WIDTH AT 12TH FRET: 2 1/8" * FINGERBOARD POSITION INLAYS: 28 Style * FINGERBOARD BINDING: White Boltaron® * FINISH BACK & SIDES: Semi Gloss/ Dark Filler * FINISH TOP: Polished Gloss * FINISH NECK: Semi Gloss/ Dark Mahogany Stain/ Dark Filler * BRIDGE MATERIAL: Black Micarta * BRIDGE STYLE: 1 Style Belly * BRIDGE STRING SPACING: 2 1/8" * SADDLE: 16" Radius/Compensated/White Micarta® * TUNING MACHINES: Chrome w/ Small Knobs * RECOMMENDED STRINGS: Martin MSP 4100 Light Phosphor Bronze * BRIDGE & END PINS: White w/ Black Dots * PICKGUARD: I-02 Tortoise Color * ELECTRONICS: Fishman® Prefix Premium Stereo Onboard Blender .
1) Mic your guitar cabinet, running the mic signal into a simple mixer with your effect units patched in on effects sends and returns. Run the mixer into a power amp and full-range speakers, or powered full range monitor speakers (the “wet” cabinets), placed on either side of your dry cabinet. Set the effects units 100 percent wet and blend in the amount of effect you want into the wet cabs. Use a MIDI foot controller to change presets on the effects units, and add an expression pedal to control things like the output volume of the effect signal, or the feedback of a delay. For live applications, the soundman can mic your dry cabinet separately and take a stereo line-out signal from your mixer for the effects, panning the effected signal hard left and right in the PA. Guitarists such as Eric Johnson and Larry Carlton have used this approach.
In the 1960s, the tonal palette of the electric guitar was further modified by introducing effect units in its signal path, before the guitar amp, of which one of the earliest units was the fuzz pedal. Effects units come in several formats, the most common of which are the stompbox "pedal" and the rackmount unit. A stomp box (or pedal) is a small metal or plastic box containing the circuitry, which is placed on the floor in front of the musician and connected in line with the patch cord connected to the instrument. The box is typically controlled by one or more foot-pedal on-off switches and it typically contains only one or two effects. Pedals are smaller than rackmount effects and usually less expensive. "Guitar pedalboards" are used by musicians who use multiple stomp-boxes; these may be a DIY project made with plywood or a commercial stock or custom-made pedalboard.
When you have a setup that you like, you can easily save it as a track preset — or, better still, create multiple track presets for different types of sounds. Cubase can even make a fine host for live performance, should you decide to trade your rack of effects for a svelte laptop that patches directly into the PA system, as you can switch instantly between racks. (I'll cover how to do this at the end of the article.)
• Brute force game : Offers the same realistic engine that can be found in STRUMMED ACOUSTIC 1 and 2 – ideal for chord accompaniment. It also contains riffs and a new game mode by picking Picking: just play a chord for creating very convincing arpeggio patterns. Reproduction of these new types of patterns should be completely familiar to users of STRUMMED ACOUSTIC.
{ "thumbImageID": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "defaultDisplayName": "Sterling by Music Man S.U.B. Ray4 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Black Rosewood Fingerboard", "sku": "sku:site51378221681150", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard-1378221681150.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Satin Walnut", "sku": "sku:site51331921974523", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Walnut-1331921974523.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51358268440972", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Mint-Green-1358268440972.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Satin Blue Rosewood Fingerboard", "sku": "sku:site51378221681125", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard-1378221681125.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The only reason the Yamaha Pacifica would have low action is if the string height was set low. Just making a broad statement like “if you want a low action guitar buy a Yamaha Pacifica” I know that is not your words but that is what you seem to be implying. Some beginning guitar player could buy a Yamaha Pacifica that has high action. All guitars can have low action if they are set-up to have low action. Some good info here regardless. Ben.
When in doubt, reach for the Dummies guide. These standardized, annotated guides have taught countless people to do countless things that were once over their respective heads. Like the Hal Leonard complete guide above, this massive, 648 page door stop includes six different sub-books, including three basics volumes and three genre-specific guides. It’s the everything-to-everyone approach. It might be overwhelming, but at least you’ll have everything you need in one place.

At least five sunburst hollowbodies were offered in ’61, the PE-7, PE-8, PE-13, PE-14 and PE-51. These appear to have glued-in necks, by the way, with the open-book head, circular sticker logo and rectangular metal-covered pickups. The PE-7 was a non-cutaway thinline with dots, a single neck pickup, elevated pickguard, a fancy lyre trapeze tailpiece and volume and tone controls mounted on the lower bout. ’60s Bizarre Guitars shows a ca. ’61 PE-8 with a single black-plastic-covered pickup with Teisco printed on the top, small strip inlays, wooden pickguard, a fancy harp tailpiece and volume and tone mounted on the lower bout. The following year this model would have two pickups, so whether this is typical or not is unknown. The PE-13 and PE-14 were single-rounded-cutaway archtops, the difference being in finish, the former being blonde and the latter sunburst. Both these were full-bodied jazz guitars, with the small block inlays, twin pickups, chicken beak selectors, elevated ‘guards and two volumes and two tones mounted on the lower bout. Some of these carried fancy Gibson Johnny Smith trapeze tails. The PE-51 was a twin pickup, single-rounded-cutaway thinline archtop, with a chicken beak selector, ordinary trapeze tail and one volume and tone on the lower bout.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker
Beside learning the basics, avoiding modeling amps and multi-effect pedals in the beginning will allow you to focus on the few basic effects every guitarist needs along the way – Reverb, Chorus, Delay and Compressor. Reverb is a must, and most amps have onboard reverb effects. Once you begin to get the hang of playing guitar and wrap your head around those basic effects you can branch out to other effects and modeling amps.
{ "thumbImageID": "JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood/J25600000001001", "defaultDisplayName": "Jackson JS32L Dinky DKA Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Bright Blue Rosewood", "sku": "sku:site51436798377279", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Jackson/JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood-1436798377279.gc", "skuImageId": "JS32L-Dinky-DKA-Left-Handed-Electric-Guitar-Bright-Blue-Rosewood/J25600000001001", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Fender came up with the California Series lineup of acoustic guitars to celebrate its Southern California roots. Every aspect of this guitar is uniquely Fender, from the Strat-style headstock and vintage-style slot tuners to the slim-taper neck and preamp, which is the product of the collaboration between Fender and trusted electronics brand Fishman.
Guitar effects pedals can range from just £30 each for cheap, Chinese-made copies to over £200 for boutique hand-made pedals with unique sounds. For the average good-quality pedal (made by a company such as BOSS, for example), you’ll be looking at around £50-£100. This might seem like a lot for one effect, but if you’re careful that one pedal could last years.
But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
The Reaction Many manufacturers reacted by making warranties void if amps were driven at full power, some threatened to cut off retailers who sold their amps to bands that played ‘music of the devil’. The parody of this historical contradiction has been rewritten, to fit mythical beliefs that brilliant designers created these amps for what ‘rock musos’ wanted.
Additionally, Gibson’s president Ted McCarty states that the Gibson Guitar Corporation merely approached Les Paul for the right to imprint the musician’s name on the headstock to increase model sales, and that in 1951, Gibson showed Paul a nearly finished instrument. McCarty also claims that design discussions with Les Paul were limited to the tailpiece and the fitting of a maple cap over the mahogany body for increased density and sustain, which Les Paul had requested reversed. However, according to Gibson Guitar, this reversal would have caused the guitar to become too heavy, and Paul’s request was refused.[12] Another switch: the original Custom was to be all mahogany and the Goldtop was to have the maple cap/mahogany body. Beyond these requests, Les Paul’s contributions to the guitar line bearing his name were stated to be cosmetic. For example, ever the showman, Paul had specified that the guitar be offered in a gold finish, not only for flashiness, but to emphasize the high quality of the Les Paul instrument, as well.[12] The later-issue Les Paul models included flame maple (tiger stripe) and “quilted” maple finishes, again in contrast to the competing Fender line’s range of car-like color finishes. Gibson was notably inconsistent with its wood choices, and some goldtops have had their finish stripped to reveal beautifully figured wood hidden underneath.[citation needed]
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).
The guitar’s ‘shoulders’ – where the body meets the neck joint – will usually be slightly more sloped than you’d see in a classic dreadnought acoustic, while the base of the body will also be narrower than larger sized guitars. All of which makes for a more comfortable and less physically intrusive playing experience. Another obvious benefit of this is the portability of parlour guitars. Their relatively smaller form factor means they lend themselves well to being slung in a case and carted off to gigs with less hassle than, for example, a jumbo-sized acoustic.
(Book). Backbeat's successful Handbook format applied to the world's most popular instrument. The Electric Guitar Handbook is the latest entry in Backbeat's best-selling handbook series, combining a two-part book and an audio CD in a practical lay-flat binding for ease of reference when playing. Part one of the book examines how different types of electric guitars are made, and why varying construction methods influence the way guitars sound. It also looks at the role of various pieces of guitar hardware, including pick-ups, tremolo set-ups, and bridges. Part two is a comprehensive, user-friendly course in playing the electric guitar, from the basics of posture and hand positioning to music and tab reading and advanced performance. Newly written exercises presented in the book and also on the accompanying CD take the learner through each step in the process, covering styles including rock, country, blues, soul/funk, indie/alternative, and metal. Author Rod Fogg also offers practical advice on everything from simple scales to complex chords, alongside short features introducing key performers and styles.
• For the fifth insert (leave the fourth empty), go to Distortion/AmpSimulator and click on the plug‑in's edit button. For the Amplifier Model, select Crunch, and try the following parameter values: Drive at 8.7, Bass, Middle, and Treble all at 5.0, Presence at 6.2, and Volume set to 5.0. For the Cabinet, select Cabinet 2, with Lo Damping at 38 and Hi Damping at 35.
Being part of Schecter's upper tier guitar line, this one comes packed with premium appointments, including a nice looking arched quilt maple top that follows the double cutaway shape of the mahogany body. It also has a 3-piece set mahogany neck that can withstand angry riff playing while the ultra access heel allows for easier upper fret access when you want to hit your audience with high note solos. The guitar has a Sustainiac Humbucker on the neck (known for long sustained notes) and the high output EMG 81 Active Humbucker that's great for metal riffs. Other features include Floyd Rose 1000 Series Tremolo, 25.5" scale length and 1.625" nut width.
If you’ve never listened to Chet Atkins, you should do it right now. The rockabilly player was a skilled instrumental guitar player, playing most of his songs without any backing from other musicians. For a great sample of his talent, give a listen to his version of “Mr. Sandman.” His alternating thumb rhythm and syncopated melodies are marvels of beauty and precision on the instrument.
Replace or upgrade your guitars volume and tone controls with the best quality pots available from CTS, Bourns, Fender, Alpha, Alps and more. From full size to mini pots, long shaft and short shaft pots, blend pots and stacked concentric pots, push/pull pots and more, we have the pot you need! Not sure which pot is right for your project? Then check out the Guitar Electronics FAQ Page for more info on pot values, pot tapers and more.
Eddie is #1, or at least tied with Hendrix, who relies on reputation alone. Bon jovi's guitarist is a joke. For some reason, people (who have no idea what they are talking about) think Bon jovi is better than all of the other 80s bands that have solid guitar players that aren't on the list that are better in many ways, specifically the guitar. (definitely leppard, Guns N' Roses, Ratt, motley crue, etc.) Anyway Eddie Van Halens self taught style is the best that there is. This list is more of a popularity contest, a popularity contest where people who have no idea what they are talking about vote for the band they have heard 1 or 2 songs from. The electric guitar was played by many, for all those who can't get on the radio and name the band that is playing most of the time, better yet the album, shouldn't be voting. But if you can, vote whoever.

In terms of how the effects and amp models sound, we give the Zoom G3X a 7 out of 10. Most effects sound great and very convincing. All but the most discerning tone snobs would be able to distinguish them from the “real thing.” As is typical for digital multi-effects units, the quality of the overdrive and distortion effects is sub-par. Conversely, delays, reverbs, and choruses sound pretty great. In fact, one recommendation many users make is to start out with the Zoom G3X, and eventually buy a separate dedicated overdrive or distortion pedal, like a Fulltone OCD or Pro Co RAT2. This comment from an owner sums it up well:
Two other totally new guitars debuted in November of ’88, the ST-3 ($225) and ST-4 ($235). These were both Strats, with maple necks, rosewood fingerboards, volume and two tones, five-way select, chrome hardware, SAT non-locking vibrato, in black, white or red with graphics. The ST-3 had three single-coils, whereas the ST-4 had a ‘bucker and two singles. Cases or gig bags were extra.
Anyway, as the Strat-style guitars have three pickups, the selector switch works like this: all the way to the left (relative to the Jimi pic) would limit the guitar’s output to the sound of the neck pickup. One position to the right will blend the neck pickup with the middle pickup. Put the switch in the middle, and you’ll get just the sound of the middle pickup, as you may have guessed. The next position will blend the middle and bridge pickups, and all the way to the right, it’s all bridge pickup.
You think those guys are good? They are, but you should hear my uncle- Chris Lambert- and my cousin -Brent Lambert-. My uncle works at the Shadow Box in Columbus (or is it Cincinnati?) Ohio. He plays in a whole bunch of the music shows as a guitarist, and he rocks. Sometimes my cousin works there, too. Brent is just as good as my uncle, and they're both as good as the people you put on here.
There is no way to indicate strumming patterns or the duration of notes. Take our examples above. If you know these two songs, you can quickly figure out how to play these passages. But imagine that you don't know them. How long do you hold the C chord at the beginning of Silent Night? How long do you play the notes for Day Tripper? The only indication in Silent Night is the inclusion of lyrics. For Day Tripper, the distance between the numbers gives you minimal information about note duration, but you could never reproduce the riff if you didn't hear someone else play it.
We are still in the testing phase with this system, and our representatives are still finding out how to give you the best possible experience. Therefore, it may happen that we do not understand you (please speak clearly in either German or English only), that equipment is being tried out by other customers temporarily, or that there are problems with the connection. Please do not hesitate to give us feedback whenever anything like this happens, so that we may learn from this and improve our service.
Epiphone introduces the Les Paul Special VE (Vintage Edition) electric guitar featuring the classic Les Paul profile with a lightweight Poplar body. The Les Paul Special VE is powered by Epiphone Open Coil humbuckers and is available in beautiful “Vintage Worn” color finishes.For decades, the Les Paul Special has been one of Epiphone’s best se...  Click To Read More About This Product
The Univox/Aria Les Paul openly copied its American original, but would never be mistaken for it because it continued many characteristics typical of Japanese production at the time; a bolt-on neck with the usual narrow fingerboard, sitting relatively high on the body, zero frets, block inlays (with rounded corners) and rounded ends. The headstock was a copy of the Gibson open book. And, obviously, it didn’t have Gibson humbuckers, favoring instead a design with 12 adjustable poles in a metal cover with a narrow black insert slit in the middle, sitting on black surrounds. Controls were standard three-way with two volumes and tones. The knobs were those tall, skinny gold kind seen on many early Japanese copies. Hardware was gold-plated. These first Univox Les Paul copies survived into the early ’70s, but were probably gone by around ’74. By ’71, the model was called either the Mother or the R&B Guitar Outfit and was available in either black (U1982) or gold (U1983) finishes. Also by ’71, the Univox logo had changed from the early plastic version to the more common outlined block letter decal.
Nice list but how did the Hagstrom Ultra Swede not make the cut? Not only does its quality exceed most of what Epiphone has to offer (not knocking Epi, just sayin) and match many other brands 3x+ its price, it is (in my opinion) also one of the most versatile guitars I can think of. Actually, it seems Hagstrom is ignored or forgotten in what seemingly appears to be every comparison or "top ten" list available... What gives?
Jump up ^ Hicks, Michael (2000). Sixties Rock: Garage, Psychedelic, and Other Satisfactions. University of Illinois Press. p. 18. ISBN 0-252-06915-3. While most of the documentation on early fuzz boxes has been discarded or lost, the earliest such devices appear to have been introduced in 1962. The best known from that year was the Maestro Fuzztone FZ-1...

The one-piece maple neck was discontinued in 1959. From 1959 until summer 1962 the fingerboard was a piece of rosewood milled flat on the underside and glued to the maple. This has become known as a “slab fingerboard”. The slab fingerboard was approx 4.8 mm at its thickest point in the center of the neck under strings 3 and 4. From mid 1964–1979 the rosewood and maple were pre radiused and the fingerboard became known as curved, round laminate or “veneer”, having an even thickness across the neck unlike the previous slab type. This design change was made because Fender encountered problems with some of the necks twisting with the slab design and this new method of construction reduced this problem significantly. Maple fingerboards were available as a special order only. The following year the pickguard design changed to a 3-ply (4-ply on some colors) “multi-layer” with 11 screw holes. After purchasing Fender in 1965, CBS began to offer both a maple neck with a separate glued-on laminated maple fretboard in 1967 (known as a “maple cap” neck) and the rosewood fretboard over maple neck remaining the other neck option. Three years later, the CBS-owned Fender companies re-introduced the 1-piece maple neck after a 10-year absence. The primary reason for the switch to rosewood in 1959 was that Gibson guitars had rosewood fingerboards and customers wanted this. Also, the maple fingerboards discolored very quickly because the old nitro cellulose lacquer was not very durable and wore through on the fretboard very quickly.
The materials and the methods of classical guitar construction may vary, but the typical shape is either modern classical guitar or that historic classical guitar similar to the early romantic guitars of France and Italy. Classical guitar strings once made of gut are now made of such polymers as nylon, with fine wire wound about the acoustically lower (bass side) strings.
Richie Sambora: features an alder body, a 22-fret neck with maple fingerboard, mother of pearl “star” fingerboard inlays, Floyd Rose “Original” locking tremolo, 25dB active mid-boost circuit with active/passive switch, two Fender Texas Special single-coil pickups (neck/middle) and a DiMarzio PAF Pro humbucker in the bridge position. Updated in 1999 with American Vintage hardware, dual-coil Ceramic Noiseless pickups and a 12dB active mid-boost preamp with “no-load” tone circuit and bypass switch. Also available as a “standard” version with a poplar body, rosewood fingerboard with 21 medium-jumbo frets, DiMarzio PAF Pro humbucker with two standard alnico single-coils and a Floyd Rose II locking tremolo. Discontinued in 2002.
du nur müssen gehe durch das galerie unter dem Jaguar Guitar Kit bild. Wir bieten an bild Jaguar Guitar Kit ist ähnlich , weil unsere Website konzentriere dich auf Diese Kategorie können Benutzer herumkommen leicht und wir zeigen ein geradliniger das thema Suchen nach Bilder, die eine erlauben Verbraucher suchen , Wenn Ihr Bild auf unserer Website ist und Sie sich beschweren möchten, können Sie Datei a Problem durch Senden ein Kontakt ist erhältlich . Das sortiment von bild Jaguar Guitar Kit das sind gewählt direkt vom Administrator und mit hohe Auflösung (HD) sowie erleichtert, Bilder herunterzuladen.
If you’ve decided to make the neck from scratch, rather than purchasing it, you will want to cut that at this point. Make sure you are following specifications for how it will need to connect to the body. It’s best to cut the basic shape first and then refine.  You also need to hollow out space for the truss rod. Finally, for a rosewood fretboard, you will need to laminate the board to the neck.
As this site was founded by one of the circuit board designers from, you can be assured that all of the homework has been done for you in selecting the appropriate parts for each circuit. Many of the kits we sell are not available from any other US supplier. Currently, we only ship to the USA, however, we plan to expand to the rest of North America in the future.
All of us got carried away. We had great guitars back in the ’50s and ’60s. Then we went a little crazy. All of us – players and makers alike – started adding features and making demands that drove complexity up, up and away. Silvertone guitars represent the honest character of the guitars that created the classic music that still rules today. ... more ...
One and a half steps down. Famously used by Black Sabbath's Tony Iommi in the 1970s, as well as Carrie Brownstein, Dimebag Darrell of Pantera, Eyehategod, Architects, Dying Fetus, Anata, Corin Tucker of Sleater-Kinney, Between the Buried and Me, Machine Head (tuned 40 cents sharp), Down, All That Remains, Bolt Thrower, Pete Loeffler of Chevelle (on Wonder What's Next), Billy Howerdel of A Perfect Circle and Ashes Divide, Wes Borland of Limp Bizkit, Guns N' Roses (on "Jumpin' Jack Flash" and "I Don't Care About You"), Slayer (on "Gemini" from Undisputed Attitude, Diabolus In Musica, the majority of God Hates Us All as well as "Cult" and "Black Serenade" from Christ Illusion), and Stone Sour, as well as former guitarist Jim Root's other band Slipknot on the song "Snuff". Also used by Kyuss on the Sons of Kyuss EP and on the songs "Isolation", "Big Bikes" and "Stage III" from Wretch. Used by Metallica on the song "Bad Seed" from the album Reload, by blink-182 in "Obvious". Also used on Considered Dead and The Erosion of Sanity by Canadian technical death metal band Gorguts.
Wah-Wah: For swishy, rounded sounds that sort of sound like the guitar is wailing, a wah-wah pedal employs a sweeping filter controlled by a spring-loaded treadle, creating quirky frequency boosts as you work the pedal up and down. A famous version of this pedal is marketed by one manufacturer as the “Crybaby,” in an attempt to describe its tone in one word. The late Jimi Hendrix used one of these pedals to great advantage.

learning how to play songs on guitar is not necessarily the same as learning how to play guitar. If your just repeating something without understanding it, your not learning. If you are one of the very few who can instinctively play, learn songs and teach yourself simply by doing- then it doesn't really matter- many (of the few) really successful musicians have done it this way. In most cases, a beginner should do both- learn the chords and the theory pertaining to the songs you want to play, so you can more easily connect the learning to the playing. One thing is for sure, you're not going to be able play very many songs without first knowing at least your 7 basic major and minor chords and some basic rhythm patterns. All the other primary chords (7 / 9 / 11 and 13's) are all built off these 7 basic major and minor triad structures. it's all up to you as to how much effort and time and how far you want to go with it- in any case good luck and have fun with it
No, you’re right. The more I think about it, the more I see the attraction. Plus, I was wrong in my previous comment when I said the sides would sound the same up to the limit of the smaller cap. Because I think they’re be audible resonance differences between the two values. It’s the same reason why the scheme I’m discussing differs from a standard tone control. And I sound vague, it’s ’cause I am! One reason I’m eager to explore this …

Other than the old cranked amp or faulty preamp channel, these are the grandaddies of distortion devices. Fuzzes were also among the first of the transistorized guitar effects being built back in the early 1960s—which is no surprise when you discover the simplicity of most of them. It’s almost pointless to describe the sound of a vintage-style fuzz tone more than the name already does. They slather a slightly wooly, rounded, warm but sparkly distortion all over the guitar signal (see, you could just say “fuzzy”) to give more meat, girth, and sustain to the sound. More imposing units can be guilty of taking charge of the entire signal and bending it to their own synthetic demands—“brick-wall processing,” as Hendrix-approved effects builder Roger Mayer puts it himself (meaning your signal hits that wall and cannot pass through without a total transformation of its nature and character)—while those which many consider to be the more playable devices retain elements of your dynamics, touch, feel, and core tonality. In the case of “brick wall” type fuzzes, the resultant sound is still, usually, more processed and artificial than any of the preceding types of pedals in this category. The more dynamic fuzz pedals, however, are great for working with you and preserving the critical elements of your touch and tone. Turn a tube amp up to where it’s starting to break up and you’ve got gentle overdrive; crank it to the max and you’ve got heavy distortion. Pull out one of the pair of output tubes, use the wrong-value bias resistor on a preamp tube, or beat it senseless with a crowbar and you might just get it to sound like fuzz. It’s not a natural sound, but it can be a great one, and it’s a major part of many players’ signature tones.
Various manufacturers have developed attractive looking multi-effects pedals and claim that their product is the "best". After searching forums, reading customer reviews and talking one on one with the experts, we have shortlisted some of the best multi effects pedals of this year. If you're looking at delaying sound, you may wish to look at a pedal with a delay effect.
Opening the case, the AE doesn't disappoint. There are the classic lines of the AE body, with just the right amount of bling, you instantly feel that you are looking at a quality instrument. As you'd expect from Ibanez, the neck, quite frankly is a dream. Featuring its advanced comfort profile to be found on all the AE range, it is slim and relatively shallow and combined with the silky satin finish makes it a joy to play. Tonally, the combination of Sitka spruce and the bracing result in a guitar that is seriously bright while still being well balanced and that definitely projects. It also sustains forever and, while uncomplicated, will sit exceptionally well in a band situation. At this price, the AE500 is a serious contender and gives the Martins and Gibsons in this price range a run for their money.
{ "thumbImageID": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "defaultDisplayName": "Squier Affinity Mini Strat Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Pink", "sku": "sku:site51500000053100", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink-1500000053100.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Pink/J86206000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000053099", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red-1500000053099.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Torino-Red/J86206000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053098", "price": "129.99", "regularPrice": "129.99", "msrpPrice": "235.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black-1500000053098.gc", "skuImageId": "Affinity-Mini-Strat-Electric-Guitar-with-Rosewood-Fingerboard-Black/J86206000001000", "brandName": "Squier", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Looking for a lifelong friend, something solid that will get better with age and can take a thrashing if needed. I plan on using drop tunings for heavy rock and will be dropping a set of alnico bare knuckle pickups into it and running it through a dual rectifier. Preferences but not important are, mahogany body, standard bridge, Les Paul style necks, most classic body shapes. Any model/brand suggestions would be greatly appreciated. I’m living in an isolated region so this will be a blind purchase. Really love my Schecter Diamond Series Tempest Classic but unfortunately it did not stand the test of time and will need a restoration on the neck.

Can you scientifically prove the role of these influencers? Lab geeks and gadget gurus can measure signal strength, decibels, frequency distribution, gamma radiation, and other ranges. They can graph this data, create new data by creating logarithms, create even more data by creating even more logarithims, but they can’t decide what’s good or bad. Like it or not, you simply can not use a computer to prove that a ’63 Strat sounds “better” than a cheap 1988 import.
{ "thumbImageID": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "defaultDisplayName": "Epiphone Limited Edition Les Paul Traditional PRO-II Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Ocean Blue Burst", "sku": "sku:site51500000014857", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst-1500000014857.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ocean-Blue-Burst/J40313000005000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Wine Red", "sku": "sku:site51500000014856", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red-1500000014856.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Wine-Red/J40313000004000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Sunburst", "sku": "sku:site51500000014853", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst-1500000014853.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Vintage-Sunburst/J40313000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Desert Burst", "sku": "sku:site51500000014855", "price": "499.00", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst-1500000014855.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Desert-Burst/J40313000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000014854", "price": "399.99", "regularPrice": "499.00", "msrpPrice": "832.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony-1500000014854.gc", "skuImageId": "Limited-Edition-Les-Paul-Traditional-PRO-II-Electric-Guitar-Ebony/J40313000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }