Consider so-called “vintage” or “’50s-style” wiring, in which the tone pot and cap are connected to the middle lug of the volume pot rather than the usual third lug. Given the sheer number of posts the topic has amassed on guitar-geek sites, you’d think it was an earth-shaking option. Yeah, it’s a cool mod that I happen to dig, but really, the sonic benefit is modest: just a bit less loss of brightness when you dial down the volume.

The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.
I'm going to assume that if you're reading this, you've probably been to two dozen guitar sites, all with varying, if not conflicting information on the correct way to do a setup. I've been there too, I've watched guys on youtube filing down frets with a dremel tool. Now it didn't look right to me, but maybe it works for him. The reality is there is more than one way to do something, and that's OK. If the end result is a great sounding instrument, it doesn't matter how you got there. So I'm going to show you my way of how to get to a great sounding electric guitar. And if you should choose to do something differently, and it works, great!!. Part of having some fun in life is experimenting, I encourage it.

There’s an old proverb that goes, “If you can’t afford a Fender Strat, get a Fender Standard Strat.” We can’t agree more. This is the guitar company that changed the world of electric guitar, so you can’t go wrong with any Fender. But, if you have the money, go with the Standard over the Squire as that’s truly a beginner guitar. The Standard has features such as three single-coil pickups, synchronized tremolo with high-mass bridge block, and a ‘70s-style headstock logo. While some sites are selling this guitar close to $400, it’s more commonly found just under $500. 

Rosewood back and sides, abalone (pearl) inlay around top edge and soundhole (but not on top around the fingerboard like a style 41,42,45 would have), inlaid bridge pins. Fancy backstripe of horizontal lines between two rows of diagonal lines (like style 45). Most style 40 models made were hawaiian style with flat fingerboard radius, flat flush frets, high string action, and no bridge saddle compensation. Most popular was the OO-40H (though they did made 2-40, 0-40, 000-40 and 000-40H models prior to WW2). Sometimes these are converted to regular "spanish" style guitar (fingerboard radiused, refretted, neck reset, bridge saddle angled). Made from the 1860s to 1917, then 1928 to 1941, then 1985 to present.

Of course, any item is only worth what a willing buyer will pay to a willing seller. iGuide?is "just a guide." Please be aware that PRICES VARY WIDELY from region to region. Current estimated values are the result of much research. And we invite anyone to help add and update data. Read the "What's A Wiki" section below for more info on how to help.

Capture ideas and create songs easily with a riff-based workflow, loop recording, automatic track creation (4 tracks), 7 guitar-oriented effects, support for amp models (AmpliTube, PodFarm, StudioDevil and others), 1 InstantDrummer (expandable), and more. Stay in the creative flow with tools that look like gear, and create complete songs without putting down your guitar!
A good starting point when recording is to place the mic close to the grille and positioned over the centre of the speaker. However, it's worth moving the mic a little off centre if you're after a less toppy sound.Guitar amps tend to use 10-inch or 12-inch speakers without tweeters or crossovers, so they have a very limited upper-frequency response. These speakers may be used singly or in multiples, in either sealed or open-backed cabinets. The familiar overdrive sound was almost certainly discovered by accident when early amplifiers were driven beyond their design limits in an attempt to obtain more volume, but because of the restricted top end of the speaker systems employed at the time, the distortion was stripped of its more abrasive upper harmonics and actually sounded quite musical. So, what started out as a side effect of limited technology soon became adopted by blues players and turned into a distinctive style, which later evolved into rock, and then into heavy metal with all its spin-off genres.
Versatile- many of the practice amps today have “AUX” (Auxiliary) inputs for your electronic music devices like your iPod, phone, or tablet computer. This is essential for learning songs because you can pipe your song from your device into your practice amp and play along either out loud or with your headphones in private. With so many music apps out today for iPhones and Android devices, you can also connect the headphone jack of your practice amp to your personal device to learn new songs and/or record your performance! Check out Ultimate Guitar Web on Google Chrome
While all acoustic guitars share the same basic construction and design elements, there are important differences that affect their sound and playability. Each guitar shares those basic characteristics above, but now that you know how an acoustic guitar is designed and built, you will want to consider some of the variables that change how each guitar feels and plays. These variables include:

Our flagship guitar. Customers have been asking Denny to build this instrument for such a long time that he finally gave in and designed what many are calling the best acoustic on the market today.  We’ve had players put this guitar up against the best from Taylor, Martin, Gibson, Fender, Santa Cruz, Bourgeois, and we never get them back, even with our 100% money back guarantee. If you’re looking for your last guitar you can pass onto your children this is our #1 guitar. We’re sold out and back ordered on them most of the year so when you see one grab it as Denny builds only a few annually.

GUITAR BLEND/BALANCE POT, 500KA.  Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special MN taper used for balance/blend pots.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
Three and one half steps down from Drop D. Used by Darkest Hour on the song "Wasteland", Attack Attack!, Baroness (on their first two EPs), The Acacia Strain (on some songs), Dead by April (on some songs) and In Flames (on the song "Transparent" from Reroute to Remain). Chelsea Grin also used this tuning on their album Ashes to Ashes. Also Pantera and Whitechapel recorded Sandblasted Skin in G-g-C-F-A-D, Drop G variation with D standard.
If you decide to choose a guitar, amplifier and accessories separately, consider spending more on the guitar than the amplifier. A better guitar will often suit a player’s needs longer, and a less expensive amp will be fine for early practicing sessions. If the player decides to upgrade down the road, often they may only need to upgrade the amplifier and not their entire setup.
You don’t have to be a pro player to strut your stuff on an acoustic electric git. Beginners will enjoy the medium-low action the hybrid offers, the on-board tuner (on some guitars), and the convenience of not having to remain static on stage due to the limitations of a mic. With all that said, it’s time for you to narrow down your options with the customized lists you’ll find below!
As music professionals, we're all familiar with guitarists and the rows of pedals they set up on stage at every gig. They're definitely on to something when it comes to effects on-the-fly, but when you're setting up a studio or pro audio rig, there's a simpler solution: multi effects processors. These full-sized units bring a ton of versatility to the table (or, more accurately speaking, the rack) and they can play a crucial role in shaping your own signature sound.
I've been playing guitar actively for 40 years. I was looking for a dreadnought cutaway with pre-amp. At this price point there isn't a better made guitar. I would have to spend 2-3 times as much for rosewood back, sides, fret board and saddle for a Taylor or Martin.My first guitar was a Yamaha, so I was happy to find another that took me back. It is aesthetically flawless. I think the Fishman in my Martin Custom X is a tad stronger but I can EQ that; and I love the tuner. If it matters to you, it is made in China. (I thought Yamahas were Japanese).Sounds amazing un-plugged with great bottom end. Very pleased.

In the event it does not work out, the next measure is to utilize automotive fine grade sand paper to decontaminate contact points. Once more, cover this around a Q-tip for jack inputs and replicate the contact cleaner procedure. By now, you should have confirmed any likelihood that the problem is caused by a cleanliness issue. All your equipment should be fresh and clean for your upcoming performance.

After covering the Top 5 Guitar Plugins You Need To Know and 5 Best Multi Effects for Beginner Guitar Players and 5 Guitar Stomp Box Pedals Every Guitarist Needs let’s face it: probably half of our sound comes from our amplifiers. That makes them kind of important… and with so many little things to consider, from size and reliability to power output and built-in effects, you might appreciate some suggestions. So without further ado, here are my Top 10 recommendations (in no particular order) for beginner Guitar Amps to get you started.

By contrast, tuning (or pitch) correction processors and plug-ins are normally considered processors rather than effects, but they do have creative uses. The idea behind these devices is to monitor the pitch of the incoming signal, then compare it to a user-defined scale, which can be a simple chromatic scale or any combination of notes. Pitch-shifting techniques are then used to nudge the audio to the nearest semitone in the user's scale but, because the amount of pitch-shift required is usually quite small, the result doesn't sound grainy or lumpy, as often happens when large amounts of pitch-shift are generated. Because pitch tracking is used to identify the original pitch, only monophonic signals can be treated.

To ensure 100% customer satisfaction Bajaao offers 10 day return policy and we also pay for the return shipping to help you be free of the online shopping anxiety. Our content rich page is your one stop to get all the required information about the products be it the product description or the user generated hands on reviews. A friendly and knowledgeable staff is there to help you out with your queries should there be anything else you wish to know about the product, process, payment or after sale service. Our dedicated team will help you to select from the best of the products within your range. Call our experts to find out the best product to suit your style and need and buy Electric Guitars at the lowest prices in India.

Every guitarist who bends or vibratoes a string to make it sing owes a debt to B.B. King. With influences as diverse as T-Bone Walker, Charlie Christian and Django Reinhardt, the late guitarist turned the blues world upside down in 1952 with “3 O’Clock Blues.” Almost overnight, the harmonica was supplanted as the primary solo instrument in blues, as guitarists scrambled to imitate B.B.’s soloing style, especially in Chicago.
The road toward becoming a better guitarist is paved in… books? It certainly can be, although there are plenty of routes that both beginners and professionals take to improve upon — and bone up on — their craft. The books on this list are about history and technique. They’re books that you’ll pull off the shelf for years to come to look up a vintage guitar you’re curious about or a chord progression or song you’ve been meaning to master. You may find additional inspiration reading the autobiographies of your favorite guitarists, but we decided to leave those off this particular list. If you’re in the market for a good guitar book, read on.
The Kaman Corporation soon diversified, branching off into nuclear weapons testing, commercial helicopter flight, the development and testing of chemicals, and helicopter bearings production. But in the early 1960s, financial problems due to the failure of their commercial flight division forced them to consider expanding into new markets, such as entertainment and leisure. Charles Kaman, still an avid guitar player, became interested in the making of guitars.[2][6]
Some Korean Ibanez serial numbers are purely numeric with no alphabetic characters. According to Jim Donahue these guitars were manufactured in the Cort factory, in which he had the supervision. Because they had no date stamps available when they started, the serials numbers of Artstar models in this factory were written by hand. These handwritten serial numbers are hard to decipher. The production of these Artstar models at the Cort factory was discontinued in 2003.
{ "thumbImageID": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "defaultDisplayName": "Yamaha APX600 Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage White", "sku": "sku:site51500000208044", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Vintage-White-1500000208044.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Vintage-White/L03937000005000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000208043", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Natural-1500000208043.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Natural/L03937000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Old Violin Sunburst", "sku": "sku:site51500000208047", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst-1500000208047.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Old-Violin-Sunburst/L03937000003000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000208045", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Black-1500000208045.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Black/L03937000004000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Oriental Blue Burst", "sku": "sku:site51500000208046", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "470.00", "priceVisibility": "1", "skuUrl": "/Yamaha/APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst-1500000208046.gc", "skuImageId": "APX600-Acoustic-Electric-Guitar-Oriental-Blue-Burst/L03937000001000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Chrome ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

TASTING NOTES: The dynamic mics have the sharpest, edgiest tones. The condensers have a neutral, full-frequency sound. The ribbons have rounded highs and warm lows. Remember, though, that the prettiest sound isn’t always the best choice. Many engineers swear by the relatively harsh Shure SM-57, and not just because you can buy one for less than $100. Its tough, even brittle, edge can shine in aggressive rock mixes.
It's impossible to ignore the British brand, which has been linked to the most famous names in rock history for several decades. Who hasn't seen "Marshall walls" stacked on the stage behind their favorite bands? Unlike Fender, their typical sound is not clean but rather "crunchy" and a bit sandy, like you can hear on some albums by The Who and AC/DC. Their first prototypes were Fender Bassman replicas that slowly found their own personality. For instance, Marshall decided to split the amp from the speaker cabinet (4 x 12" Celestion) to create the famous "stack". The use of tubes to provide more gain is also noteworthy, and it translates into more overdrive than the Bassman can offer. And so the JTM 45 was born, followed by many legendary models like the JCM 800 and 900, as well as the Plexis series.
The trusty traveler guitar:  There are many makes and models, and of those that we reviewed, some that are cheaply priced (i.e. under $150) are just that- cheap.  Traveler guitars come in all kinds of shapes and sizes, and some more complex models offer foldaway design that buckle at the neck joint.  Additionally, there are acoustic electric models if you desire the flexibility of plugging in.  First, it is best to determine "why" you are seriously considering a travel guitar before getting into the research.  Answer that question for yourself first, and it could steer you away from a specific traveler guitar and toward a different size acoustic guitar body.  Also, it might re-affirm your choice.  Consider the following questions:
{"pageName":"[gc] pdp: ibanez 1984 1984 ibanez destroyer i red solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113668304;;;;evar65=null-Guitars-Ibanez","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
As for Acoustic guitars go, you are somewhat limited by the make and model of the guitar. You can make differences in tone by the type of picks you use and also the thickness of your strings. Actually the string factor goes for both electric and acoustic. The thicker the strings the fuller the tone. Its kinda whatever you can stand on your fingers. I like to use 11’s. Stevie Ray Vaughan used crazy thick gauges of strings and had an incredible tone. Bottom line…you have to try different things and experiment to find the right tone!

Sounds cool! You’re right that flats are a key to the ’50s Nashville sound. But a lot of guitarists forget that almost EVERYONE used flats until the latter part of the ’60s. Early Beatles, Stones, Who, Kinks, Motown and other R&B, surf, and of course anything jazz-related — it’s all flatwound guitar work till ’66, ’67 or so. Also, the main reason we migrated away from nickel is because the material became markedly more expensive at the end of the decade. (Though yes, some did prefer the brighter tones of replacement materials.)
Very large cabinets, such as 8x10" cabinets, may have both wheels and a long "towel bar"-style handle to facilitate moving the equipment. Some 8x10" cabinets have handles on the top and bottom to facilitate two-person carrying of the cab. Some combo amplifiers have wheels and a retractable carry handle, to enable bassists to walk while pulling their bass amp; this can enable bassists to walk onstage with their bass and amp or walk to a venue with their gear.
Breedlove Guitars was established in 1990 by luthiers Larry Breedlove and Steve Henderson, while working at Taylor Guitars. After moving to Oregon, Breedlove and Henderson began specializing in custom, fingerstyle six and twelve string guitars. In 1991 the first Breedlove guitar model appeared, after experiments with the JLD bridge truss system and various bracing techniques. Around 1994, Larry’s brother, Kim Breedlove, joined Larry and Steve as a master craftsman. Breedlove strives to be environmentally conscious, and is “dedicated to selecting alternatives to endangered rainforest woods.”[1] Breedlove has since expanded to include mandolins and ukuleles.
’71 blue vinyl combo guitar amps included the Univox 1040 and 1240. The 1040 Guitar Amplifier ($480) was a combo sporting 10 tubes, 105 watts RMS, two channels, four inputs, volume, bass, middle, treble controls for each channel, presence, reverb, tremolo, footswitch, and two 12″ Univox Heavy Duty speakers with 20-ounce Alnico magnets (possibly Jensens). The illustration shows a grille with two small circles on top and two large circles for the speakers. It’s possible this had a pair of tweeters in the small holes, but the description doesn’t say. The 1240 Guitar Amplifier ($399.50) featured eight tubes, 60 watts, two channels with the same controls as the 1040, and four 10″ Univox Special Design speakers with 10-ounce ceramic magnets (again, sound like Jensens). The grille had four round cutouts.
You’d be hard-pressed to find a more distinctive guitar tandem in modern metal than Zacky Vengeance (Zachary Baker) and Synyster Gates (Brian Haner, Jr.). From their sound, to their look, even to their names, the duo routinely go down guitar paths other metal axmen don’t dare travel, spicing up Avenged Sevenfold’s otherwise dark and aggressive attack with, among other things, hooky, major-key melodies, laid-back acoustic picking, buoyant, carnival-esque rhythms and a whole lot of style.
In the 1960s Japanese guitar makers started to mainly copy American guitar designs and Ibanez branded copies of Gibson, Fender and Rickenbacker models started to appear. This resulted in the so called Ibanez lawsuit period. After the lawsuit period Hoshino Gakki introduced Ibanez models that were not copies of the Gibson or Fender designs such as the Iceman and Roadster. The company has produced its own guitar designs ever since. The late 1980s and early 1990s were an important period for the Ibanez brand. Hoshino Gakki's relationship with Frank Zappa's former guitarist Steve Vai resulted in the introduction of the Ibanez JEM and the Ibanez Universe models and after the earlier successes of the Roadster and Iceman models in the late 1970s/early 1980s, Hoshino Gakki entered the superstrat market with the RG series which were a lower priced version of the Ibanez JEM model.
The thoughtful design and close-tolerance machining of the mechanical components of most electric guitars enables them to be set-up and adjusted with great precision. But it is important to make these adjustments in the correct order- Neck-Nut-Bridge saddles. Making fine tune adjustment to any of these elements without reference to the others, or out of this order, will prevent a guitar's true potential from being realized.
There aren’t that many entry-level to mid-priced electric guitars that can meet the demands of heavy use and/or meet the standards of professional musicians, which makes the PRS SE Standard 24 pretty special. Its tag price is friendly enough for beginners and intermediate players yet it’s packed with features that make it a favorite among pro-level guitarists.
Rackmounts are most commonly used in recording studios and "front of house" live sound mixing situations, though professional musicians who play electric bass, electric guitar, or synthesizers may use them in place of stompboxes, to create a rackmounted head unit for their speaker cabinet(s). Rackmounts are controlled by knobs, switches or buttons on their front panel, and often by a MIDI digital control interface. During live performances, a musician can operate rackmounted effects using a "foot controller".[14] By setting up effects in a rack-mounted road case, this speeds up set-up and tear-down, because all of the effects can be connected together with patch cords (which can be left connected permanently) and all of the units can be plugged into a power bar. This means that a musician only needs to plug in the main power bar into AC Mains power and plug their instrument into the rack, and the last effect unit's output into their instrument amplifier and/or the PA system.
When playing seventh chords, guitarists often play only subset of notes from the chord. The fifth is often omitted. When a guitar is accompanied by a bass, the guitarist may omit the bass note from a chord. As discussed earlier, the third of a triad is doubled to emphasize its major or minor quality; similarly, the third of a seventh is doubled to emphasize its major or minor quality. The most frequent seventh is the dominant seventh; the minor, half-diminished, and major sevenths are also popular.[79]

This 248 page book is part of a series of similar volumes, including The Guitar Grimoire: A Compendium of Formulas for Guitar Scales and Modes, The Guitar Grimoire: Progressions & Improvisation, The Guitar Grimoire: A Compendium of Guitar Chords and Voicings, and so on. You get the idea. Master a few of these and you’re going to to be in excellent shape.
Ovation’s Lyracord backs weren’t the company’s only fling with synthetic materials. In the early ’70s Charles Kaman set his engineers, many of whom were not guitar players, to work on developing a new synthetic guitar, yielding the deep-bowl, acoustic-electric Adamas which went into production in 1976. The Adamas top, called a Fibronic Soundboard, was made of a laminate of carbon-graphite and birch about a third the thickness of a conventional spruce top. Instead of a regular round central soundhole, Kaman engineers positioned 22 smaller holes on the upper shoulders surrounded by epaulets of multicolored woods in a kind of leaf design. The bridges and headstock featured elaborate scroll carving. The neck was reinforced with a patented Kaman bar, a u-shaped cast aluminum insert designed to keep the neck stable even with dramatic changes in temperature and climate. The necks and fingerboards were made of walnut. The fingerboards had hollow triangular maple inlays, tapered beginning at the 18th fret on the bass side to the 24th fret on the treble. Hardware was gold. Until the advent of Ovation’s Collector Series in 1982, the Adamas was Ovation’s flagship, favored by the likes of Larry Coryell and others.
Even apparently crude solutions can produce useful results. For example, I was recording at a friend's flat many years ago and the amp I had only sounded any good when it was played flat out. The answer was to place the speaker cabinet on its back, place the mic right up against the grill, then cover the whole thing with blankets, sleeping bags and anything else that came to hand. It made the level in the room far more tolerable yet still produced the sound I wanted!

NEW ARRIVAL SORRY SOLD OUT QUICKLY ...She's super clean Genuine Ibanez Hoshino Factory release this is a cool collector piece of Japanese Law-suit modle guitar history WoW is this well made guitar Beautiful in person just impressive . This vintage J200 is now over 39 years old that plays with ease and has a HUGE SOUND... really sweet beautiful tone that rings out pretty loudly and its playability makes this guitar fun to play and an excellent choice in your next cool Japanese Vintage guitar... she's in better than average cond too well taken care of Adult owned right here in California she's in top form folks. With its Nice medium slim taper flamey maple neck 1-11/16ths at the nut. Classic beautiful original pick guard looks exactly like the old age Gibson, the detailed workmanship fit & finish you will be sure to notice and love. Ready to tour or record tonight! every time you pick it up to play. TO SEE THE PICTURE GALLERY OF THIS GUITAR CUT & PASTE THIS LINK THEN CLICK OR RETURN:
Buy a Kay online at our main web site, call our store or visit our Chicago guitar shop in person and check out the new Kay Vintage Reissues. We're not one of those guitar super stores, you will find we're friendly, knowledgeable and easy to work with.  We sell guitars world wide and we want to earn your business so please don't hesitate to contact us for our best Kay prices.  We ship Kay Basses and Guitars to Canada, Australia, UK, Europe, Japan and other locations.
A. Musical instruments, especially acoustic and electric guitars, are routinely pawned for short-term loans. Buyers prepared to pay cash can sometimes find high-quality acoustic guitars at pawn shops, but there are no guarantees on condition. Furthermore, the seller may or may not be able to provide any technical information or additional accessories.
I have played a ASAT Telecastor Bass for about thirteen years. I keep purchasing other bass guitars for many other reasons. But I have sold them all. I am down to just one bass that's all I need with my G&L, it very responsive, it has many opitions with pick ups and the action is good. It took along time for me to figure out how to use the pick ups because there is so many different ways you adjust it. They are built with better quality parts than a fender. They are numbered from the factory in america. But watch out for the Tribute series that is fake or cheap want to be G&L. A real G&L will be a little more expensive but the quality is excellent
I took a guitar to this great place to have new strings put on it. I explained to the owner that the guitar belonged to my son who had been killed in a car accident. I was donating the guitar to a pro...gram called SOAR. A program for veterans to learn to play. They are a therapy type program for any veterans. Thank you for the help I received to be able to give this guitar to this worthy program. They are great people in the guitar store. See More
The Tone knob is basically a filter to cut highs. And, once again, the pickup will sound best when turning it all the way up. With the ever-growing amount of effects amps have to offer and those available in pedal format, we often forget that this setting even exists. This basic control allows you to, for example, smoothen a jazzy sound or choke a way-too-shrilling fuzz, or anything else in that line that comes to your mind. Only your ears can tell if the sound is convincing or not!
He also opened the doors for left-handed guitar players by showing them that they too can master a musical instrument and make something unforgettable from it. In the same way that a “southpaw” boxer like Manny Pacquiao achieved unbelievable things in the ring, the gifted left-handed guitarist Jimmy Hendrix pushed guitar playing to its highest level.

For subtle modulation just set every knob at about 11 o'clock. You'll get a thin, shimmering layer over your acoustic guitar's tone that doesn't drown out the natural resonance of the instrument. The pedal doesn't boost your signal or add any kind of volume. All you'll hear is a clear, simple effect. Additionally, the CH-1's two stereo outputs allow you to easily split your signal between two amplification sources. Simply plug your primary source into output A (mono) and the secondary source into output B.
This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
Even with the myriad finish options, this latest model looks very much like the original Strats from Fender's original production line. As a testament to how effective the original design is, most of the specs and even the hardware design are followed even to this day. Speaking of specs, the current iteration features the same double cutaway alder body and bolt-on maple neck with a scale length of 25.5", narrower nut-width of 1.685" and SSS (Three Single Coil) pickup configuration. Giving this guitar its authentic quack and chime are three V-Mode Strat Single-coils.

The Hi-Flier guitar, which was possibly built in the Matsumoku factory, underwent multiple phases during the course of its production. Each of the Hi-Flier’s four manufacturing phases came with a variety of feature changes, ranging from simply switching the color of the pickguard to actually fitting the guitar for humbuckers rather than the P90-style pickups it originally came with.

The noise he complains about is likely ground loop hum, caused by multiple paths to ground, very common in pedalboards and I explained earlier. I do believe it’s better to get rid of noise rather than use a noise suppressor. Get rid of the noise, and you have a quieter signal path. I do use noise supressors but only to deal with noisy pedals while they are on, such as a compressor/distortion I love that can be a little noisy.

His kustom masterpieces like “Slow Burn” (a 1936 Auburn boat-tail speedster), “Skyscraper” (a 1953 Buick Skylark) and his daily driver known as “The Grinch” (a 1952 Oldsmobile) are drivable works of art that defy the bland Toyota Priuses, Lexuses and Land Rover SUVs of his Northern California environs like a stiff middle-finger salute wearing a skull ring.
As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.
Out of all the hopped-up Caucasians who turbocharged the blues in the late Sixties, Texas albino Johnny Winter was both the whitest and the fastest. Songs like his 1969 cover of "Highway 61 Revisited" are astonishing showpieces of his lightningfast thumb-picked electric slide playing. Jimi Hendrix sought him out as a sideman, and Muddy Waters recognized his talent at first glance, becoming a friend and collaborator: "That guy up there onstage – I got to see him up close," Waters later said. "He plays eight notes to my one!"

If you’re recording or practicing at home, or you think your own amplifier sounds like garbage you’ll enjoy the Cab Sim switch. This when activated, causes your signal to simulate the sound of a mic'd up guitar cabinet rather than your direct amp signal, which is extremely useful when you want high quality recordings at home direct to a DAW, or you just can’t seem to make your amplifier sound good!

hi-thanks joe -i have  installed a push pull pot to get middle and neck and all three pickups totegher-it works prefect but when not pulled it has seemed to change the sound on my normal five  selector sound and made all my normal five sounds very twangy-is this normal as when i pull the push pull pot up the extra sounds get clearer-is it becuase i have two tone caps on the push pull one on top half and one on the bottom but i thought that should not matter when the tone is at 10-thanks sean

Jack Douglas also points out a beneficial side-effect, in his experience, of recordings made using the phase EQ approach: "When you build a mix — I don't care if it's four tracks, eight tracks, or 96 — the real nightmare is when you put something up and the only way you can hear it is by blasting it. There's nothing worse than putting up something you're excited about, and it's gone. If you [record guitars] like this, I guarantee that as soon as you put the sound in the mix it will be there. Not only that, it won't wipe out everything else in the mix, because it will have such a separate and distinct character."

Launch price: $599 / £500 | Body: Basswood | Neck: Hard maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Manson Design bridge humbucker, Manson Design neck single coil | Controls: Volume, tone, 3-way selector switch | Hardware: Two-piece bridge and tailpiece, staggered height locking machineheads | Left-handed: Yes: MBC-1LH | Finish: Matt Black
While it may not look like a classic amplifier, if you're into classic rock style tones for home use, the Yamaha THR10C is probably the amp that you really need. Ideally, we would all be rocking with big amps, but not all of us have the space or acoustically tuned rooms to let loose. And since we are using low volume amps more often, Yamaha designed their THR line to be the best in providing you with just that - low volume performance for jamming, practice or recording. The THR10C is part of this line, featuring the same 10W setup and stereo 3" speakers, but with tones that replicate the sound of classic amps. It also houses some essential effects which include reverb, delay, chorus and more. In addition to the usual clean to overdriven tones, Yamaha also equipped this unit with acoustic guitar amp and bass amp models, so you can directly play or record with those instruments. All these features are packed in a distinct and portable profile, and is powered either by the supplied AC adapter or via 8 x AA batteries.
The American Nashville B-Bender guitar is modeled after the personally customized instruments of some of Nashville’s top players, featuring a Fender/Parsons/Green B-Bender system, two American Tele single-coils (neck, bridge), a Texas Special Strat single-coil (middle) and five-way “Strat-O-Tele” pickup switching. Ideal for country bends and steel guitar glisses, this Tele is available only with a maple fingerboard.
The guitar itself is decent, both my 8-year boy and his guitar teacher like it. But the mini amplifier is a BIG JOKE, seriously - it only uses a 9V battery and so small in size and so low in volume, you can barely hear it. There is a 9V DC power plug port. However, when I plugged in a 9V DC power plug (it is not included, but I found one in my toolbox), it only gave me white noise without any sound (the 9V battery can still give out a little bit volume). Initially, I thought the guitar was broken until I tested it on my home theater, then I realized it was the problem of the useless mini amplifier. I ended up buying a Fender amplifier for my son so that he can play some loud music.

Older 1800s Martins are a challange to date (since they don't have a serial number like 1898 and later Martins). A "New York" stamp does not immediately suggest that the Martin guitar is from the 1830s for example. To accurately date pre-1898 Martins you must be familiar design and ornamentation appointments and the changes that took place in each model throughout the 1800s. Most useful though is the stamp, but you can only use the stamp on the INSIDE of the body on it's center backstrip (visible through the soundhole) to date a guitar. And even then you can only date to a period (and not to an exact date). For example if it says on the center back strip, "C.F. Martin, New York", then the guitar is pre-1867. If it says, "C.F. Martin & Co., New York", it is between 1867 and 1897. Note 1860-1890s Martins have a date (year of manufacture) penciled on the underside of the top. Check with a mirror, looking just below the soundhole and between the braces.

Add to this the physical attributes and ergonomics of a .strandberg* that work together to relax muscles, joints and tendons when playing. Some players are freaked out by the low weight, others by the lack of headstock and some have a natural playing position that places their thumb right at the edge of the EndurNeck™ and is not comfortable at all.

The full-size guitar in black by DirectlyCheap should therefore be on your list for consideration. Made out of linden, basswood and catalpa with a particularly ornate inlay around the sound hole, this model has a really lovely sound for the price. Just keep in mind that, like other guitar shipments, when you receive the guitar, you will have to “set up” the neck. If you need help with this, a guitar tech will assist.

You might initially think that Music Lab is narcissistic for creating a line of guitar VSTs with the word “real” in them. But after you hear the first note, you’ll be kicking yourself for doubting it. There is a lot to cover with the “Real” line, and since they share many of the same features, we will slowly go over the components of these VSTs throughout the reviews for them.  
"This axe is no slave to the past, however, starting with Leo’s PTB™ (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What’s more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy’s hard-rock maple neck features an easy-playing satin finish, comfortable 9 1/2″ radius and Jescar 57110 medium-jumbo nickel-silver frets for silky playability. The moment you open the luxurious hardshell case, you’ll be greeted with a stunning instrument and delicious aroma that’ll have your pulse racing."
The guitar itself features a resonant and solid American Alder body, maple neck and 2 x single-coil pickups with 1 x humbucker installed with a coil tap function for tonal variety. The guitar is comfortable to play and sounds great especially when you throw some distortion at it through an amplifier. The guitar is budget friendly and ideal for beginners and home recording enthusiasts thanks to its high build quality and comfortable playing experience.

If you are trying to find the best electric guitar for beginners but you lack the time to do the necessary research in order to find a quality product, this short introduction should help you out. After reading plenty of electric guitar reviews and after comparing top-notch products, we have reached the conclusion that Epiphone Les Paul STANDARD is the model that you should have in mind. This device has a beautiful mahogany body and a maple top that is said to deliver an easy to distinguish classic tone. As a plus, the model comes outfitted with Alnico Classic humbucker pickups that secure a subtle and warm tone. If the Epiphone Les Paul STANDARD is out of stock, we recommend that you check out the Epiphone Les Paul STANDARD Electric as it is a reliable alternative that you might equally enjoy.

Thank you for the post. This explained a lot to me. However, one question I have is that I play lead and when I solo, I need to boost volume. I currently have an Ernie Ball volume pedal but I can never get it to go back to the right spot when I decrease the volume after a solo. I’d much prefer to use stomp box that I can just preset the volume before playing so I have a solo volume, and a strumming volume that matches the other guitar. Do you have any suggestion on what I can do to achieve this since the EB pedal doesn’t seem to work well for me?
• Similarly, insert the Soft Clipper into the third insert slot and click on its Edit button. For settings, try putting the Input at ‑0.0, Mix at 55, 0.0, Second at 100, and Third at 57. As with the Compressor, set the output to a high level, again stopping short of distortion. These settings are intended to get you started; you may want to tweak them depending on your guitar, pickup, playing style, and so on.
Ibanez offers a wide variety of electric guitars, bass guitars, and acoustic guitars. They’re not the best at producing super high-end guitars for pros and enthusiasts, but they are excellent guitars for any beginner. The price you typically pay for an ibanez is usually between $200 and $500. If you’re set on Ibanez, they do offer higher end models that can cost over $2,500. Despite their reasonable prices, the quality of Ibanez guitars is decent. Ibanez tends to have good performance at economical prices. Not every aspect of their guitars are perfect as they are a cheaper brand, but they do tend to put a little more effort into areas that matter. For example, the necks of their guitars are typically mahogany or basswood. These materials are known as the high-end materials that the top guitar models would use.

{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(863) 688-4590, visibilitySalePrice=239.99, typeCondition=Used, statusText=In stock, isPriceDrop=false, invMsgBackOrdered=false, displaySku=114572014, skuPriceVisibility=1, stickerUrlLink=, kitCarouselSkuIds=null, stickerURL=, availableDate=Fri Oct 12 04:15:17 PDT 2018, invMsgAvailability=, serialized=false, listPrice=239.99, isShipsInternational=false, name=dark red, storeCity=Lakeland, invMsgBuyToDemand=false, partNumber=null, inventoryStatus=1000, storeName=Guitar Center Lakeland, newPrice=239.99, condition=null, status=instock, stickerClass=, stickerText=, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, usedGrade=Good, prop65=null, salePrice=239.99, warranty=true, storeId=774, displayId=114572014, stickerDesc=, isOnSale=false} 239.99 USD
Mastering guitars isn’t a piece of cake, mainly if you are a greenhorn. You get lost in the labyrinth of types of guitars, each having different size, shapes, and price values. Most of these especially hunt your wallet, burdening down your pockets with hefty price tags. As an amateur, you find no other option but to pay the said amount hoping to get something useful. Indeed, the best electric guitar brands are usually inclined towards the more pricey side. If you have background knowledge about the best brands, who knows you may get your desired guitar in an affordable range. Through this article, you will learn what different types of guitar brands are available in the market.
I am sorry to hear this, Andrew. Rear shifted bracing should help protect against the kind of top bulges normally seen behind the bridge. Unfortunately, when it comes to guitars made by hand out of organic materials like thin, solid wood, some pieces of wood will misbehave. The old saying is a guitar takes about two years before the wood stops trying to turn back into a tree.
There’s always been something special about playing a great guitar riff. Riffs that are memorable, get stuck in your head, and that everyone knows are actually in many cases are relatively easy to play. That’s because most people remember simple melodies that they can hum along to. I don’t think many people would be able to hum along to “Through the fire and flames”.
Now, as others have mentioned, there is a switch that controls which pickup (or pickups plural) you want to use at any given moment. Seeing as each pickup is placed at a different point under the strings, the vibrations are slightly different. The closer the strings are to the bridge at the bottom, the more 'narrow' and intense the vibrations get. Thus the current generated from the magnets lead to different sound characteristics.
It’s a good idea to make a template for your wiring on any guitar where the controls aren’t mounted to a pickguard (like a Strat) or a control plate (like a Tele). To make the template, put a piece of non-corrugated cardboard over the guitar, use finger pressure to find where the control holes are, and very carefully poke through the cardboard with a punch or a nail to make a hole for your template. You can enlarge the holes with a pencil or a round file until they are big enough for the controls to be mounted snugly. It’s also a good idea to write what is supposed to go where on the template with a marker.
Guitar amplifiers can also modify the instrument's tone by emphasizing or de-emphasizing certain frequencies, using equalizer controls, which function the same way as the bass and treble knobs on a home hi-fi stereo, and by adding electronic effects; distortion (also called "overdrive") and reverb are commonly available as built-in features. The input of modern guitar amplifiers is a 1/4" jack, which is fed a signal from an electro-magnetic pickup (from an electric guitar) or a piezoelectric pickup (usually from an acoustic guitar) using a patch cord, or a wireless transmitter. For electric guitar players, their choice of guitar amp and the settings they use on the amplifier are a key part of their signature tone or sound. Some guitar players are longtime users of a specific amp brand or model. Guitarists may also use external effects pedals to alter the sound of their tone before the signal reaches the amplifier.
The body is pre-drilled and crafted from basswood, while the maple neck is meant to be glued into the neck joint, something that requires a bit of care and precision. Because of its hollow body design, installing electronics can be a bit of a challenge, but very doable as attested to by reviews. Note that wood is raw and unfinished, so you'll need a bit more sanding and patching before you paint on it.
The term piezo refers to the use of piezoelectric crystals that transfer vibrations into an electric current. Piezo pickups are inexpensive to produce, and as such are the most commonly found pickup in acoustic-electric guitars. Piezo pickups generally have a bright tone and strong mid-range response, thankfully they are bundled with preamps that help make the sound more like an unplugged acoustic guitar. While there's nothing better than a true miked acoustic tone, sound quality of piezo preamp system's have steadily been improving, which is good for both guitar players and manufacturers.
Music Go Round® is your ultimate used gear resource—we buy used musical instruments all day, every day. We understand the value of your instruments and make it easy for you to sell or trade. Bring your used music gear, such as guitars, drums, amps, bass guitars and pro-sound equipment —we’ll pay you $$$ on the spot—and you take home that must-have piece to your collection.
{ "thumbImageID": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "defaultDisplayName": "Ibanez GIO series GRGR120EX Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "White", "sku": "sku:site51500000032825", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-White-1500000032825.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51500000032826", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue-1500000032826.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }