Dobro also sold a Dobro amplifier to accompany the Dobro All-Electric. The first Dobro amp had a large cabinet made by Bulwin of Los Angeles. The grillcover was a smaller version of the typical guitar resonator cover, provided by Rickenbacker. This had five tubes and an 8″ Lansing field coil speaker. The Lansing was probably a matter of convenience because the company was located down the street from Dobro. The rectifier tube was an 80 and the output tubes were two 42s. These apparently had two inputs, volume and an on/off switch. The chassis on these amps were supposed to have been made by Dobro itself, but more than likely they were sent out to some local L.A. radio manufacturers and assembled at Dobro.
It depends on what you call important. Does an electric guitar's tonewood affect the tone? No. Sorry. When the thing capturing the sound is directly under the thing generating the sound and, it makes no sense for the wood, which vibrates in a secondary fashion, to have any effect on a tone that has already left the guitar. Think of it in layers, like this:
In around 1988 Martin introduced a line of Stinger amps and effects pedals. Amps included the FX-1 (10 watts, 8″ speaker, “Tube Synth” distortion circuit, $152), the FX-1R (15 watts, 8″ speaker, Tube Synth, spring reverb, $220), FX-3B (15 watts, 10″ speaker, compression, separate pre-amp and master volume controls, 3-band EQ, $189), FX-3C (30 watts, 12″ speaker, Tube Synth, chorus, $299), and the FX-3RC (65 watts, 12″ speaker, Tube Synth, chorus, reverb, effects loop, $379).

If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
Semi-hollow designs are similar to hollow-body guitars, but typically feature a thinner body with a central wooden block inside. This helps to control feedback while giving the instrument some of the same tonal characteristics as a hollow-body. This type of guitar has been used successfully in just about every genre of music, with the exception of extreme metal.
This page contains information, pictures, videos, user generated reviews, automatically generated review and videos about Washburn XM DLX2 but we do not warrant the quality, accuracy or completeness of any information on our web site. If you have more information about Washburn XM DLX2 please write a review. Some reviews are automatically generated generated by using verbal representation of publicly available numeric rating information musicians entered while writing review of Washburn XM DLX2. User generated reviews of Washburn XM DLX2 represent opinions of credited authors alone, and do not represent Chorder's opinion.
Tonhöhe ebenfalls gehoben und kann auf die gewünschte Tonlage eingestellt werden. Der Ibanez DOWNSHIFTER erlaubt es, die Tonlage einer Saite durch einfache Hebelbetätigung auf eine vorgegebene gewünschte Position zu senken. Um präzises Tuning für sowohl Auf- und Ab-Positionen zu erzielen, müssen Sie beide Hebeleinstellungen vor Betätigung des Downshifters voreinstellen.
A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.
In terms of the Teisco brand, the moving force was Jack Westheimer and his W.M.I. company in Chicago. According to published accounts, Westheimer began importing Teisco-made Kingstons in around 1961, although these were not promoted in the trade press until the beginning of ’64. It was this connection that would make Teisco the dominant powerhouse it was to become.
Fender is the biggest guitar company in the world right now. Fender guitars make more sales than any other guitar manufacturer. Fenders are used by many celebrated musicians today. The guitar produces great sound due to its imported wood. In addition, this brand is deemed to have some of the best looking guitars. Their most successful guitars include the Telecaster and the Stratocaster. The Stratocaster has been used by big names including Eric Clapton and of course the legendary guitarist, Jimi Hendrix. If you are looking for a guitar that’s both good looking and sounds great, go with a Fender.
The valvetronix XL-series builds on the success of the original valvetronix digital amplifier. A range of tube-powered modelling amplifiers, with hi-gain sounds designed to span the entire range of heavy rock music. The XL-series uses VOX's patented Valve Reactor technology, producing the sound and feel of an all-tube amp. Models: AD15VT-XL 15-watt 1×10" speaker, AD30VT-XL 30-watt 1×12" speaker, AD50VT-XL 50-watt 2×12" speakers, AD100VT-XL 100-watt 2×12" speakers.

This page contains information, pictures, videos, user generated reviews, automatically generated review and videos about Washburn XM DLX2 but we do not warrant the quality, accuracy or completeness of any information on our web site. If you have more information about Washburn XM DLX2 please write a review. Some reviews are automatically generated generated by using verbal representation of publicly available numeric rating information musicians entered while writing review of Washburn XM DLX2. User generated reviews of Washburn XM DLX2 represent opinions of credited authors alone, and do not represent Chorder's opinion.
One of the most versatile electric guitars we encountered when putting together our list is ESP’s LTD EC-1000 KOA. Koa is a Hawaiian wood that this guitars top is made from, and it has very special sound qualities. It makes the tone very bright, crisp and clear, but at the same time it’s full of life and depth. We immediately though that the sound reminded us of an ukulele or some other happy little stringed instrument, and the sound can easily bring us back to summer evenings around a camp fire.

Here we have a cool vintage piece. Made in USA and is highly Possible this is a Gibson Archtop. Great Original condition make this a great find...this one is a Solid 8.5/10 condition. This one still has the original tuners and pick guard too. The neck is straight and the frets are still OK...and wow what a supprise this one plays great!..nice vintage repairs or damages just natural play wear and dings etc associated with a true vintage player....EZ on the eyes see the great detailed bindings! and wow this baby sounds very nice...great for Jazz .
The strings on your electric guitar have a major impact on its sound and playability. If you’ve taken a look at the huge Musician’s Friend guitar string assortment, you’ve likely realized that there’s a lot to consider in figuring out which strings are right for you and your instrument. Keep reading to find the strings that best match your electric guitar, music, and playing style.
So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.

Great article. Thank you!However I've had a lot of experience with Squier guitars. They often come in at $200, sometimes on sale for $129 but I live in a college town and have had many Squiers. All have very sharp fret ends which discourage beginners not knowing they must be filed. IDK about any of the others but this is my only complaint. Squier quality and playability (after fretwork) is amazing at that price point.

First off, I would like to say I had a lot of fun building this. Also, my hat goes off to the person that hand wrote all the tiny labels on the parts. With that being said, I couldn't get it to work. No sound at all, and only the light came on when I hit the switch. Now the fact that it didn't work could totally be an error on my part, but who knows. Now what I didn't like about this product is this: the casing is pretty small, so everything is pretty cramped (which may also contribute to why I wasn't able to get this to work, although, if you read other reviews, which I recommend for further useful information, some managed just fine), some pieces were mislabeled (There is a review that sorts this out), and the directions aren't very clear...well I thought they were clear enough, but look where that got me, so be ready for that. So 3 stars for fun, good price, and faster than expected delivery.

This may be the most important piece of equipment you will buy if you are a beginner in terms of learning leads or just learning how to layer multiple guitars into a single song. There are certainly better boxes out there but not at this price point. The looper alone makes it worth the cost, especially since it allows you to layer on drums, basic guitar part and then leads or harmonies. Or all of the above. The only real shortcoming is the 30-second limit on the looper. But that's more than enough room to lay down a chord progression against which you can practice your leads.

The Gibson Les Paul was the result of a design collaboration between Gibson Guitar Corporation and the late jazz guitarist and electronics inventor Les Paul. In 1950, with the introduction of the radically innovative Fender Telecaster to the musical market, solid-body electric guitars became a public craze (hollow-body electric guitars have more acoustic resonance but are, therefore, more prone to amplifier feedback and have less natural note duration “sustain”.) In reaction, Gibson Guitar president Ted McCarty brought guitarist Les Paul into the company as a consultant. Les Paul was a respected innovator who had been experimenting with guitar design for years to benefit his own music. In fact, he had hand-built a solid-body prototype called “The Log”, a design widely considered the first solid-body Spanish guitar ever built, as opposed to the “Hawaiian”, or lap-steel guitar. This guitar is known as “The Log” because the solid core is a pine block whose width and depth are a little more than the width of the fretboard; conventional hollow guitar sides were added for shape (Image 2), a design similar to the popular Gibson ES-335 semi-hollowbody guitar introduced in 1958. Although numerous other prototypes and limited-production solid-body models by other makers have since surfaced, it is known that in 1945–1946, Les Paul had approached Gibson with “The Log” prototype, but his solid body design was rejected.[8][9]

A Reamp® box is essentially the reverse of a DI box and converts a balanced signal into an unbalanced signal suitable for driving guitar amps. Radial makes three different versions of this device with variations in features and in quality of the transformers. For an introduction to reamping there is the passive ProRMP™, for high quality reamping there is the Reamp JCR™, and at the top of the line is the dual-channel active X-Amp™.

Chorus: Chorus pedals mimic the effect choirs and string orchestras produce naturally, by having slight variations in timbre and pitch, by mixing sounds with slight differences in timbre and pitch. A chorus effect splits the instrument-to-amplifier audio signal, and adds a slight delay and frequency variations or "vibrato" to part of the signal while leaving the rest unaltered.[71][72] A well-known usage of chorus is the lead guitar in "Come As You Are" by Nirvana.[61]

I have a Lyle Acoustic Guitar Model 690 purchased about 1966 or 67. It appears to be in near brand new condition as I've rarely played it and it has been stored in a felt lined case its entire life. All the keys still turn, it has steel strings. I'm ready to part with it and want to ask a fair price and not get soaked. Does anyone have any idea what this beautiful instrument is worth?

Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
Variable 2: Speaker configuration. In Clip 2 you hear cabinets with varying numbers of speakers. First comes the 1x12 sound of a midsized Fender combo amp. Next is a 2x12 Fender-style cabinet. After that is the distinctive sparkle of a tweed-era 4x10 Fender Bassman. The last phrase is a classic 4x12 Marshall stack with 25-watt Celestion Greenbacks. These sounds represent a single mic on a single speaker, yet you can differentiate single- and multi-speaker cabinets due to leakage from adjacent speakers.
Guild is the most underrated American premium guitar brand. Almost as good as a Martin & way better than most Gibsons, Guilds are typified by clear, crisp, even tone. While lacking the full bass & tinkly top end of a Martin, the evenness of tone is a selling point for many artists, along with the clarity. The maple models are especially bright & brassy in tone, making Guild a popular brand among rock stars in the 70s, their heydey, when some of the finest American guitars came out of their West Waverly Rhode Island plant. Top-end Guild acoustics are graced with an ebony fretboard more typically found on jazz models, slightly curved and beautifully inlaid with abalone fret markers. The Guild jumbo 12-string has been an especially prized instrument, and was for many years considered the best mass produced American 12 string available.
Lydia Lunch once beat her Teenage Jesus & the Jerks bandmates with coat hangers during practice; and her confrontational attitude was only matched by her completely unfettered guitar playing. Calling the instrument “a grand assaultive weapon,” she treated it as such, often attacking the strings with knives or even shards of glass, refusing to even bother learning chords, using it as a blunt force to express a total anti-pop, anti-punk, anti-everything rage.
The Alvarez AG75CE is on the upper range of $500 acoustic guitars. This particular model is a cedar top with rosewood back and sides. It also features scalloped and forward shifted bracing which makes for a bigger sound. Owners of this guitar are posting rave reviews citing it’s quality of build and great tone. The cutaway is a nice feature for those that want to reach the upper register of the guitar, and it looks cool too! It is a grand auditorium body, which does not quite have the bass of a dreadnought but offers a more balanced sound. Great for singing along. This guitar is a great choice for intermediate players looking to not break the bank.Check it out here.

There are few companies in the music industry that understand guitarists as well as Suhr. What other company can you think of makes excellent guitars, amplifiers and pedals? Whether you need the warm, vintage voice of a Badger or the paint-peeling roar of a PT-100... Suhr has a connoisseur level amplifier to scratch any guitarists itch. Stop in and a play a Suhr amplifier at Eddie's Guitars today. 
The inlays are the little shapes that are installed in the instruments neck/fretboard. Inlays do not make a significant difference in the sound of the instrument. They come in various shapes and materials. Inlays allow a player to quickly see where certain positions are located on the fretboard. They are also a great way to decorate, or personalize an instrument. Choose among our existing inlays designs, or send us a drawing of your own designs. Some popular inlay designs are band logos, initials, corporate brand logos, or tribal designs.
The Police were a new kind of power trio, and Andy Summers was the main reason. Quickly moving away from punk, he recast jazz chords and reggae rhythms as headlong rock & roll. Summers played as sparely as possible, constructing clipped twitches or dubby washes of sound – leaving ample room for Sting and Stewart Copeland. "His tone and style were just absolutely perfect – he left space around everything," Rush's Alex Lifeson said. "And he can handle anything from beautiful acoustic playing to jazz to hybrid kinds of stuff."
Beginning in 1960 with the T-60 solidbody, Teisco began to use the elongated “Strat” six-in-line headstock. This lasted through 1963. In 1963, the squarish Strat headstock appeared with the GB-1 solidbody bass. This seems to have lasted through 1965, but only on selected models, and with several subtle variations, including a slightly more rounded version. In 1964, probably later in the season, most of the Teisco solidbody line acquired a new hooked Strat-style headstock with four-and-two tuners on the guitars and three-and-one on the basses. This had the little hook at the throat like a Strat, and a larger hook on the tip, almost like a Woody Woodpecker plume.

The first “production” electrics were made by Stromberg-Voisinet in Chicago in 1928 under the direction of Henry Kay “Hank” Kuhrmeyer, soon to be president of the company which would shortly be renamed the Kay Musical Instrument Company. S-V developed the first commercially viable (more or less) pickup and amplifier. The pickup – we’ve yet to see one so an accurate description is impossible at this point in time – was probably a quasi-transducer which probably adapted phono cartridge or telephone receiver technology. It was placed on S-V’s two-pointed Venetian-shaped acoustic guitars and was greeted with great ballyhoo in the music trade press. The amp was produced before the development of preamp tubes, and was undoubtedly very primitive (there is no mention of even volume controls), and probably not particularly loud (though, of course, listeners had nothing to compare). Apparently, the reality didn’t live up to the hype, because Kuhrmeyer later suggested than only a few hundred of these guitars were actually made, and mention of them evaporates after 1928, likely done in by a combination of lack of performance and the upcoming Great Depression, which descended in 1929.
This Charvel is the signature model for Guthrie Govan, widely regarded as one of the finest guitarists around. Its caramelized ash body model is also up there with the finest bolt-ons we’ve ever played. The neck is extremely tight-fitting and held in place with four screws, each recessed into the contoured heel. Like any HSH set up you have huge choice on exactly how you wire it - this is no different. While the outer positions select the full humbuckers, position two voices bridge (slug single coil only) and the middle single coil; position three gives us bridge and neck (both slug single coils); position four offers the screw single coil of the neck pickup with the middle pickup. A ‘secret’ two-way mini toggle that simulates a coil-split via an old-school passive filter (a 0.1 microfarad capacitor). In many ways this feels more like high performance rifle, not a guitar. It gives off a tuned-to-perfection vibe that’s like an instrument you’ve owned for a while, gigged, modified and tweaked. Which in reality is exactly what it is only Charvel and Guthrie Govan have done it for us. But don’t dismiss this as a virtuoso rock shredder axe. Yes, if your technique is up to it, you won’t have a problem there and using just the bridge pickup you’ll probably have all you need: big and ballsy, a hint of a cocked wah-like high end it’s certainly in the JB area. But it’s offset by a pokey PAF-like neck voice, tube-y and soupy but far from one dimensional. If that was it, we’d be smiling. But there’s plenty more... Guthrie Govan’s vision for an all round workhouse that’ll stand up to the rigours of professional touring is superbly realised in this signature. Every detail is wonderfully considered. It’s not a cheap date, but it’s an astonishing guitar: a player’s tool of the highest calibre.
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
Before recording commences, make sure that all of your equipment is in good shape and not producing crackles, hums and buzzes. If you are having problems, they can often be dealt with by using noise-filtering units such as gates and expanders. These are best used before post-recording effects – compression and reverb, for example – are applied, as a compressor will emphasise noise, while a gate might chop off the natural tail of the reverb.
After shaping your sound, is important to add some depth to it, and here’s where the ‘ambiance’ pedals find their way into your rig. The chorus effect should be used properly, without overdoing it, but can give great results: the depth and the ‘3 guitarists playing your part’ effect can work amazingly well for your music. Delay and Reverb can be used lightly, in order to enhance your sound and fill up your guitar solos with a little space (by setting up a nice spring or hall reverb settings and a dotted delay) or heavily, to achieve creative sounds where the sky is the only limit.
Beyond effects, some processors offer dozens of other capabilities including recording tools, rhythm track generators, plus sound models based on vintage amps, speaker cabinets, microphones, mic preamps, and much more. Many also have MIDI and USB connectors in addition to XLR and ¼” inputs and outputs, and are designed to work seamlessly with computer and iOS-based recording software and apps.
The Epiphone brand scores another spot in this list with the Hummingbird Pro, a stylized take on the popular dreadnought shape. This guitar is the affordable version of the original Gibson Hummingbird, as seen in the hands of big name artists like Keith Richards, Noel Gallagher, Sheryl Crow and many more. It is a modern and more cost effective take on the guitar that Keith used on many of The Rolling Stones' popular tracks, including "Play with Fire" and "Satisfaction".
Superb guitars. Lakewood have both standard and custom production of 12-fret cutaway guitars. Other producers do not offer standard production - except of Taylor, but Taylors at the same price level are made technologically cheaper, resp. at the same quality level are much more expensive. My impression is that Lakewoods have a little bit lively sound than Taylors. I am interested in well made, i. e. with high quality craftmanship, 12-fret cutaways and the brand is not so important for me.

The difference extends far past just the look and feel.  Roundwound strings have a shorter life, create more string noise, and wear on your frets more, but feature a brighter tone, longer sustain, and lower tension.  You'll also hear more harmonics and be able to grip them better for bending and finger picking.  Flatwounds last longer and have a warmer sound... pretty much the opposite of what we listed for roundwound's.
While you can play one through an electric guitar amp, an acoustic guitar will sound its best if it is played through a dedicated acoustic amplifier. While similar in structure to electric guitar amps, acoustic amps are primarily designed to offer transparency. In other words, it strives to reproduce the tone of your acoustic guitar’s natural sound as closely as possible. Interestingly, they almost exclusively come in a combo format, while most acoustic amps will have two channels – one for the instrument and the other geared towards microphone use. The AER Compact 60 represents what a great acoustic guitar amp looks and sounds like, with enough power for stage use as well as a high-end organic tone.
Launched in the late 1990s the SE models are manufactured in South Korea by a third-party company (World Musical Instruments) then shipped to re-sellers and dealers in the United States. This is a major part of the cost-cutting technique, in addition to a more flat (as opposed to carved) body shape and cheaper pickups/electronics. So be advised, I’m not telling you that you’re getting a $2000 guitar for $600.

This is another really nice 12" 16 ohm guitar speaker from 1973, and is a matched pair with the one listed earlier, it has its original Pulsonic H1777 cone, and is in excellent condition, there it also has a tiny repair on the edge of the cone but this doesn't affect the sound in any way.Cash on collection preferred but carriage can be arrange if required.
Alembic | Baldwin | BC Rich | Burns | Crucianelli | Danelectro | Egmond | Eko | Epiphone | Fender | Framus | Futurama | Gibson | Goya | Gretsch | Guild | Guyatone | Hagstrom | Harmony | Hofner | Ibanez | Kalamazoo | Kay | Kent | Kramer | Levin | Martin | Magnatone | Microfrets | Mosrite | National | Ovation | PRS | Rickenbacker | Silvertone | Supro | Teisco | Yamaha | Valco | Vox | Wal | Zemaitis

The Stratocaster’s sleek, contoured body shape (officially referred to by Fender as the “Comfort Contour Body”[5][6] ) differed from the flat, slab-like design of the Telecaster. The Strat’s double cutaways allowed players easier access to higher positions on the neck.[7] The body’s recessed “beer gut” curve on the upper back, and a gradual chamfer at the front, where the player’s right arm rests, aided player’s comfort. The one-piece maple neck’s wider “dogleg”-style headstock contrasted with the very narrow Fender Telecaster’s headstock shape. The strings are anchored on a through-body pivot bridge attached with springs to a ‘claw’ in the tremolo cavity on the back of the guitar.
Although there’s no clear delineation for when Phase Two officially began, the Hi-Flier began to develop new features. While it maintained the P90-style pickups, other aspects of the guitar were changed. The fret markers shrunk and were made uniform in size, the rocker switches were replaced by three-way toggles and a plain white pickguard was made standard.
Phasers like the popular DOD-Phasor 201 are a perfect example of what a solid phaser pedal should sound like. Modern designs allow you to control many aspects of this effect, which makes them pretty versatile and suitable for most genres of music. Guitar players like Van Halen heavily rely on phasers to build their foundation, while some have even become famous due to their use of phasers. Phase shifters are generally very flexible and are among the most utilized modulation effects today.

Slightly out-of-tune strings on a bass may not jump out as much as on guitar (especially in chords), but when that bass line is sitting under other parts in the mix, even slightly off-pitch notes will make their presence known, and sometimes be harder to track down (why does this song sound a little “off”?). I’d use a tuner (h/w or s/w), but I’d also always verify by ear, before hitting record, and I’d check tuning periodically as the session progresses—just as with drums, hard players can easily put the instrument out after a few energetic takes.
ESP started life in Japan in 1975 as Electric Sound Products – a single store that provided replacements parts for guitars. These days they are a huge guitar manufacturer and a big name in heavy metal, having supplied guitars for Metallica, Megadeth, and Slayer, among others. ESP also own the subsidiary LTD, who produce low priced, entry-level versions of their guitars.

I'm looking for a similar guitar. My first electric in 1969, purchased used for $50.I lost it sometime in the 70's, but still have a picture of it. It was a sunburst finish cutaway violin shaped body with Bigsby type tailpiece and a tunable bridge with a flip up mute bar. The headstock is similar to a Gibson but the neck was thinner.I can't remember how it played or sounded.I'm just looking to replace it for nostalgic reasons. I also recently purchased a Kent Les Paul copy I found on e bay while searching for kenr guitars.I have seen the framed ads but I have yet to find that model.
sorry this has SOLD OUT: Poor mans Authentic Blues Parlor guitar from way back. This is the real deal used over 60 years this is what some poor share cropper genuine American Blues men would have been able to afford back in the day and subsequently used throughout the south by mostly poor Black folks where the berth of the blues was born of course this is from the place where great things happen BORN in USA baby and is widely considered and is acknowledged to be by most all of our greats in US or British Rockers - Jazz players & Country too all these greats players feel that these original US Southland blues is the truest of ART FORM's PURE and RAW feel it in your soul... this original sounds was not overly sophisticated at all it was RAW that was its beauty this sound from this old Stella is Authentic like that and is RAW and its woods are good - solid Burch wood and actually is an excellent tone wood in fact in those days Burch was widely used and my belief is that is a characteristic in the tone of this Original blues... Classic sound to this guitar OK it has it.... I have a few of these Stella's and love them, when you want to record and lay down an authentic REAL old school style rhythm track or play it on your porch swing and sip mint julip from a mason jar to get in the mood you can do it with this guitar its the real deal. This guitar is old did I say at least 60 likely older that being said it plays well it really kinda does... with pretty good action for what it is as good as it was 60+ years ago I recon. Tuners work, body is in good shape it aint goin anywhere its prety well made it has surface cracks and they are there and not a problem they have been there 40 years and have not gotten any worse not in the 15 years I have owned Stella! Like the movie STELLA! I could not resist the reference but I digress, Condition is Vintage good obviously not new or mint but she is 100% cool Authentic bluesman material if you want that old time Mississippi Delta to Chicago raw blues this old vintage American Icon of a Poor mans Parlor guitar, this is a classic threw & threw... I suppose I could have simply said it sounds good.... ahow ow ow ow.

In that same year, the Los Angeles-based Volu-Tone company also sold a pickup/amplifier set. Volu-Tone used "high voltage current" to sense the string vibration, a potentially dangerous approach that did not become popular. In 1934 Dobro released a guitar amp with a vacuum tube rectifier and two power tubes. By 1935, Dobro and National began selling combo amps for Hawaiian guitar. In 1934, Gibson had developed prototype combo amps, but never them. By 1935, Electro/Rickenbacher had sold more amps and electric guitars than all the amps and electrified or electric guitars that had been made from 1928 through the end of 1934.[1]

The Thunderhead had two humbuckers, gold hardware, a master volume with two tone controls, a pickup blender knob, and a phase reversal switch. Some had DeArmond pickups with metal covers, a large black insert with nonadjustable poles, plus six tiny adjustable pole screws along one edge. The ebony fingerboard was bound with diamond inlays and had the characteristic “mustache” on the end of the fingerboard. The tops and backs featured figured maple laminates. Colors options included a wine red, sunburst natural, and green (on Thunderhead only). The Thunderhead K-1360 had a trapeze tail, the K-1460 a vibrato. The Tornado (K-1160 with trapeze, K-1260 with vibrato) was a downscale version with plain top, chrome hardware, two volume and two tone controls (no phase), and the Schaller pickups.
From top to bottom, this Hummingbird creates a buzz. Whatever your preference in size, colour, tone and playing style, it’s difficult to avoid picking this Cherry Sunburst up. It’s such a simple guitar to play that it’s rare to ever feel like you’re incapable of striking the right chord - especially on a neck that’s just 12” in radius. While the traditionally ornate decoration and blushing finish have been lovingly retained, this modern Montana incarnation offers a discrete LR Baggs Element VTC system for plug-in power. It is unlike many we have seen and produces one of the best sounds we’ve heard from an electric acoustic. Throw in the pleasure of playing such a superb guitar and it’s tough to say anything bad about the Gibson Montana Hummingbird Cherry Sunburst.  

The EJ-200SCE is a great acoustic under $500. With a spruce top and maple body, it offers a great tone for the money. It comes highly recommended from other owners, who say it sounds as good as a Gibson for 1/10 of the price. It also has an onboard pre amp with a built in tuner for plugging in. It’s perfect for playing gigs or at church. It has the SlimTaper neck which will be very easy to form chords on with smaller hands. The cutaway is nice for getting those up the neck solos easily, and of course it looks great as well. Check out more pictures of this guitar here.

If you love effects like we do, we hope you'll find this top-50 list a useful guide to discovering the classic effect boxes that have shaped the guitar sounds of rock, metal, blues, punk and many other styles. And if you're like us, it will undoubtedly compel you to plunk down a chunk of cash for a collectible pedal or two on eBay. Don't say you weren't warned.

While guitar straps come in a variety of different materials, El Dorado only uses leather in theirs, so rest assured you're getting exceptional quality here. If you're going for a cool western persona, try starting your search with the top-rated Vintage Hand-Tooled Leather Guitar Strap, featuring classic basketweave embossing backed with genuine sheepskin shearling. This hand-engraved strap is finished with a solid nickel buckle and loops for a truly sophisticated look you'll be proud to showcase.
Epiphone began in Manhattan in 1903 when Anastasios Stathopoulo set up shop (not as Epiphone). When Anastasios died of cancer in 1915 his son Epaminondas (Epi) took over the business. Epiphone and Gibson had an on-going rivalry first in banjos and then in archtop guitars. Gibson finally acquired Epiphone in 1957. Although Epiphone guitars continued to be made in America for a time after the acquisition (often in the same factory, side-by-side with similar Gibson models), Epiphone is now a Gibson brand for overseas, imported lower cost guitars, though many are based on Gibson designs.
It usually has 8 terminals – two poles with 4 terminals each. Each pole has one common terminal and 3 switched. The first thing you want to figure out is which terminal is common. Note that terminal on the left is connected to the lever all the time – that’s our common terminal. The other three terminals are connected to the lever only in certain switch positions. Represented as a schematic, each pole would look like this.
Reviews of the Boss Katana Head are generally positive, with many users pointing to its versatility as its main selling point. One user described it as a Swiss Army amplifier, which encapsulates what even experts are saying. Art Thompson of Guitar Player had this to say: "I found the quality of the amp and effects sounds to be quite satisfying. There’s good touch responsiveness on the higher gain tones, and these 100-watters are definitely capable of holding their own in a band." The inclusion of a built-in speaker got a lot of thumbs up from users who are happy that they don't have to use a different amp for practice.
Fender Hot Rod Series Pro Junior III 15W 1x10 Combo - This tube-driven guitar combo with a 10” Eminence vintage-cone speaker reproduces the harmonically complex output and sensitivity to playing synamics that vintage Fender tone hounds love. Dual 12AX7 preamp and EL84 power amp tubes crank out the same celebrated midrange as vintage combos. Fender has updated the Pro Junior III with an external speaker jack, a more legible control panel, and internal tweaks.
I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.
Hardly any mention of female players, why is that? I’m a bloke, not a chick, yet this is like the UK 2011 sports personality of the year awards based on press coverage – not performance or results but drunk journo’s who only like watching blokes – but not Pat Metheny LOL – SO… No Jennifer Batten then? Rightly tho’ someone thought slide player Bonnie Raitt should get a mention – Derek Trucks got a look in (what a slide player) – had to look hard to find Larry Carlton – and Lee Ritenour – and John Scofield! Yet no Nile Rogers? And Keith Richards should be up there but why not Ronnie Woods? Nice to see Tom Scholtz remembered yet no Steve Miller who learned at the feet of Les Paul and yet no Les Paul either? Such a narrow list limited by populism not necessarily ability, tone or compositon. Not really much of list was it?
The transparent overdrive is the most natural sounding overdrive. Unlike the most commonly used multi-processing type overdrives, the transparent overdrive does not alter the tone of the input signal. The transparent overdrive's output signal will sound exactly the same to that of the input signal tone wise, just with added drive and boosted signal (dependent on the users settings). Which means there is no tone loss for more natural sounding drive. The transparent overdrive is typically priced higher due to it having nothing but the purest of sound and smooth drive.
In 1974 Martin Sigma electrics included two SGs, a Tele and a Fender bass. The SBG2-6 was pretty much a straightforward SG copy with a bolt-on neck, center-peaked three-and-three head, block inlays, large pickguard, twin humbuckers, finetune bridge, and stop tailpiece, in cherry. The SBG2-9 was pretty cool, with a natural-finished plywood body, white pickguard, rosewood fingerboard with white block inlays, gold hardware and Bigsby. The SBF2-6 was a Tele with rosewood fingerboard, three-and-three head, block inlays, neck humbucker and bridge single-coil. The SBB2-8 was the bass, with natural finished body, three-and-three head, rosewood ‘board, block inlays, white ‘guard, and two humbucking pickups.
While there are cheaper Strats under the Squier sub brand, the Standard Stratocaster is the way to go if you want a budget friendly one with with the Fender logo. This guitar is fondly called an MIM (Made in Mexico) Strat to differentiate it from the American made version. While some elitists will tell you that the difference is noticeable, many others attest that it's hard to spot the difference in an actual blind test - making this a true to form Standard Stratocaster, only this one is not made in the USA.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Diecast, Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Sunburst, Amber
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}
Lutherie has been my life's work since the beginning. After graduating from Roberto-Venn School of Lutherie in 1992, I set up my first shop in a rental garage, and began designing, building, repairing, and restoring fretted stringed instruments. Aided and abetted by 13 years of employment as a staff guitar repairman at Seattle's Trading Musician, I gained an extensive knowledge of the inner and outer workings of a vast array of instruments.
Some versions of the TG-64 had the same floating-table vibrato system as on the SD-4L; my guess would be that these were earlier versions, although one can’t place too much faith in dating Japanese guitars by hardware appointments. Others had the more typical Japanese version of the Bigsby vibrato. This guitar was sold in the United States in ’65 as the Teisco Del Rey Model ET-320, but by ’66 had been dropped from the line.
The exciting thing about the Kemper is that you can use it to capture the sound of your JTM45, right where it hits that sweet spot, with the microphone you prefer and that mic preamp that just adds a certain something. Then you can refine the 'profile' you've made while A/B-ing the digital signal with the original using the Kemper's onboard EQ, and save the sound alongside the library of 200 or so profiles that comes pre-loaded, with access to hundreds more via the Rig Exchange section of the Kemper website. If you fancy a little more spice you can clean up or crank the KPA's onboard gain control to go way beyond the level of drive available on your original amp, adjust sag, tweak the audible effects of pick attack and even, thanks to what Kemper claims is "digital alchemy", alter the size of your virtual cabinet from a huge stack right down to a cigarette packet, while there's also a fully loaded set of effects. We've heard various approaches to digital modelling sound good in the studio before but this is as close to a 'real' mic'd valve amp sound as to be indistinguishable. If you're the type of guitarist who records regularly, or a producer who wants 24/7 access to a personal library of refined and tested guitar sounds wherever you happen to be on the planet at any given time, the Kemper Profiling Amp is the product of the decade so far.
I purchased one online a little over a year ago. looks great and sounds even better. I had a serious problem with it staying in tune, changed the tuners and nut, it helped but not to the point where it needed to be. Too ban because this guitar plays and sounds great. I sold it for half the purchase price to someone not so concerned about sounding so in tune.

So half of it is finding a happy place in terms of neck size. The other half is the setup. String height is usually adjustable, with electric guitars, which is a good thing in your case. Lower string height means you don't need to push down on the string as hard to play the notes. When you find a guitar that feels good to you but the strings are kinda hard to push down, talk to the store about having it setup and intonated with a very low string height... some people use the term "fast" action.
{"pageName":"[gc] vintage: silvertone","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
The relationship between power output in watts and perceived volume is not immediately obvious. The human ear perceives a 5-watt amplifier as half as loud as a 50-watt amplifier (a tenfold increase in power), and a half-watt amplifier is a quarter as loud as a 50-watt amp. Doubling the output power of an amplifier results in a "just noticeable" increase in volume, so a 100-watt amplifier is only just noticeably louder than a 50-watt amplifier. Such generalizations are also subject to the human ear's tendency to behave as a natural compressor at high volumes.
Standard tuning but with the 6th string lowered two whole steps. Used by Alter Bridge on the song "My Champion" (tuned down a half-step) as well as Sevendust on the song "Mountain" (tuned down one and a half steps). Also used by John Mayer on the song “Neon”, and by Chino Moreno of Deftones on some songs such as "Swerve City" and "Hearts/Wires", tuned down a full step.
Use a lead to connect the row that the positive (anode) leg of the input cap C1 is on to the row that the base (middle leg) of the transistor Q1 is on. Use a second lead to connect the emitter row (left hand leg) to the ground bus. Finally, use a lead from the collector (right hand leg) row to a new row on the other side of the breadboard, near the power bus.
The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.

There have been plenty of attempts at different types of semi-hollow guitars from nearly every guitar manufacturer, and some are more successful than others. In my experience, even though Gibson does offer a fairly consistent output, there is still a fair amount of discrepancy from one instrument to the next, and as always I recommend playing a guitar before passing any judgement on it. But try and be discerning in your assessment of the guitar — versatility is king, only capable of being knocked off the throne by an absolutely golden, irreplaceable tone. Trust your ears!

Technically the knobs are just the parts you turn when adjusting your volume or sound. When you remove the knobs however you are left with the pots (potentiometers) which are used for both volume and tone control. They look identical and almost are but there are differences in the way a volume pot and a tone pot is wired, which will make more sense by the end of this article.
Hopefully, this guide has given you all the info you need in order to go out there and find the perfect guitar for yourself. We went into some aspects of electric guitars that will shape your decision the most. Beyond the ultimate considerations discussed between "this or that," the rest is a matter of preference that only develops after you've had time to gain that much experience. Until then, we hope you score the best electric guitar you can from above, as they'll carry you the distance until you've traversed the path long enough to start getting peculiar and picky.  Happy shredding!
The Quantum pickup configuration of H-S-H offers a wide variety of tones, and since this isn’t a Telecaster, having a humbucker in the neck position is especially nice, I find. That single coil in the middle should be used more as a coloring device on selector positions two and four than as a straight-ahead choice. Augment the natural fullness of the humbuckers with a little jangle from the single coil and you’re in business.
When Schecter was first founded in 1976, the company’s original purpose was to produce replacement parts for other guitar manufacturers. In 1979, they produced their first guitar and it all took off from there. Today, Schecter is one of the highest rated guitar brands. If you’re looking for a guitar to play metal in particular, Schecter could be the brand for you. Schecter is well-known for their brutal heavy metal sounds. They have a decent range of models, including basses. Schecter’s arguably most famous guitars are the Hellraiser series. They are usually closer to $1000, but it could be worth it for you. When played correctly, the heavy metal distortions and gains that blast out of the amp is fantastic and if you’re a bit more gentle you can even get some softer sounds out of it. The same can be said with most Schecter models, but they favour heavy metal, so if you’re not looking to play heavy metal, you might want to look elsewhere.
I just read all of the comments and couldn't believe how long it too for someone (John Corcoran) to mention Les Paul. As for the 'tard who "knows" better players than Robert Johnson, just remember that Johnson INVENTED the sound and everyone else is just copying him or building upon his foundation. This list might work better split up by genre. Segovia may be one of the best guitarists ever, but he doesn't work with the others on the list. Stanley Jordan is incredible, but he'd be out of place on this list. What about Charo – yes, the Coochie Coochie girl from Hollywood Squares plays a mean classical and flamenco guitar! TopTenzMaster – let's see a bunch of subcategory lists…
Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
: I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
Processed Pitch Shifts: Few pitch-shifting algorithms are transparent enough to allow you to transpose anything by more than a couple of semitones without obvious side-effects. If what you're processing is going through an amp modeller, however, you can get away with much more radical changes. You can even do effective swoops and dives in pitch by progressively increasing the amount of pitch-shifting you apply to a note, and pitch changes of an octave or more can sound good, although they probably won't sound natural at these extremes. Sam Inglis
Since they entered the electric market, it didn't take long before Ibanez became the patron saint of those who appreciate a heavier sound. Their RG series won the hearts and minds of budget crowds all around the world, mainly due to its great tone and overall performance. Today we are looking at an Ibanez RG421, which follows this core policy precisely.
Remember how we said that Ibanez has some pretty rad entry level guitars? Well, Ibanez GRX70QATBB is one that is worth mentioning. It belongs to the legendary GRX family, and brings a well-balanced performance for the money. I actually bought one of these for my nephew, and had to put it through its paces before I handed it over. It’s a bit rough around the edges, but one visit to a guitar shop took care of that.

{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: left handed electric guitars","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
If you’re a guitarist, chances are you’ve either owned or at least played on a Zoom multi-effects pedal. It’s basically an unwritten law! They have always and continue to make some of the best multi effects pedals known to the musical world, so naturally we had to include the Zoom G3n Multi-Effects Processor (as well as a handful of other Zoom models) in this list.

Inspirational, motivational and light background tune with beautiful and atmospheric melody. Good production audio for the slideshow, presentation, youtube, advertising, business project, motivational and successful videos, inspiring moments, bright achievements, film scores. I used electric guitar, muted guitar, piano, staccato strings, bass, drums, Glock, bright pads.

Fulltone’s popular Full-Drive pedal has the bonus of a switchable booster channel, while its overdrive channel goes to a fairly high gain and, unusually, uses asymmetrical clipping for a more textured sound that is quite different from the Tube Screamer’s. Asymmetrical clipping is also at the center of Boss’ SD-1 Super Overdrive (as used by Eddie Van Halen), generated by a circuit that uses two silicon diodes in series in one direction, and only one in the other, to clip each side of the waveform differently. Some players credit asymmetrical clipping with more richness, body and character; others say it sounds clanky and harsh, like an amp with mismatched output tubes. Then again, some guitarists—those in the former camp, probably—say they prefer the sound of mismatched output tubes for these same reasons. As ever, what works is up to you.
You have so many effects on this that you’ll find it difficult to get bored, all of which have been modelled on some of the most iconic sounds in effects pedal history including Boss, Line 6, Electro Harmonix, Z Vex and more. You have a huge amount of distortions, delays, reverbs, modulations, pitch/synth/filters, compressors/limiters, EQs, wahs, and even a looper to sculpt your sound with, all of which have been meticulously modelled to include the subtlest qualities and sound abnormalities that made these effects and their respective pedals so revered.
Last but not least, we feel like it is important that we talk about a unit’s tonewood. As expected, it has been proven that the kind of wood that is used in the construction of one model can actively influence how that particular unit sounds. To put it shortly, the wood is the material that can help you define just how the model that you like sounds before testing it.
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: davison","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"davison","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] category"}

Yamaha is famous around the world for its incredible, quality, instruments. Its electric guitars are no exception. The Yamaha Pacifica Series PAC112V Electric Guitar, Old Violin Sunburst is another example of Yamaha's on point production. This guitar has a solid alder body, a maple bolt neck, rosewood fingerboard, and a five-position switch with coil tap. Plus there's the tremolo - a vintage tremolo with block saddles.
Here we have a well made in Japan kinda rare to see these vintage Fender Japanese acoustics now days... interesting well built and is still beauty ..its all mahogany body & neck are very well constructed , offering good cross braced body ala D-18/28 seems to be awfully similar? my vintage Yamaha FG180 or 200 Nippon Gakki.....that is to say pretty darn nice!.. almost the same guitar but for the Fender's more stylistic headstock top shape that differs from the vintage Yamaha... this was clearly built for Fender as there import in those days Japan offered more competitive pricing to us manufactures to produce there line...this offering is really quite a nice guitar in its own right... so now its nicely aged well over the years..nice ring tone to it now, its very good overall condition, but sometime in its past history it received a doink to the binding on the back side lower bout a binding touch up repair has been done the back lower bout and is about a foot long area -replaced ..its on the back bottom like I said so its really out of sight and is out of mind the remainder of bindings are otherwise 100% very nice beautiful actually nice looking tortious style..the rest the body has a few nicks or scars not to bad looking though a real vintage Vibe to it with no major cracks or warpage the bridge & top are tight and flat so its a very sound playing instrument, 1 changed tuner. The minor abraiions had been lacquer filled to preserve the original finish integrity ..we just built up low spots with matching lacquer to level off to prevent further degradation pealing or chipping those areas have been french polished built up and then excess has been removed elsewhere leaving only the low spots filled then we polished to gloss and well it looks ... pretty darn GOOD now.. she's preserved & fully ready for another 30 years of play... this example has a NICE NECK and she plays great....Worth preserving?...I think so See pics please... This guitar has no abrasions wood cracks or issues at all just a vintage guitar thats surprisingly such a fine player...action is good not too high at all and it still has room to lower the saddle or nut even more you so the neck set is very good for many years no worries..its a nice sounding & playing 25 years old vintage Japanese guitar...and is overall a nice looking vintage example..stays in tune nicely and is a joy to play... nice vintage Japanese guitar this guitar is JVG Rated: 8.5/10 very good used guitar as described ...still after 25 years it looks & plays good. Interested in this beauty let me know..Thanks for looking, Joe Pics soon to come stay tuned!.

Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]
Gary Moore also created his own signature Gibson Les Paul in the early 1990s. Characterised by a yellow flame top, no binding and a Gary Moore truss rod cover. It featured two open-topped humbucking pick-ups, one with “zebra coils” (one white and one black bobbin). Gary formerly owned Peter Green‘s vintage Les Paul Standard with an accidentally reversed pick-up magnet.
Used Instrument Buyer - [New Window] - When it's time to sell your used instruments, nobody makes it easier than UIB. We make our best offer up front, right out of the gate, so you know you're getting top-dollar for your used musical equipment. Since 2006, we've helped everyone from professional musicians to weekend guitar warriors get the most value out of their used instruments. We offer free no-obligation quotes for your used equipment. upon your approval, simply pack your equipment, ship it to us free, and we'll promptly mail you a payment.

At one point, Fender switched to producing guitars with the bridge pickup located farthest from the highest-amplitude portion of the vibrating strings, slightly “over-wound”, thus increasing the signal output from that pickup. Even more overwound pickups (“hot-wired” designs) became popular, either for all three pickups (a “hot” configuration), or for the bridge position only (so-called “Texas Hot” due to its popularity among Southern Rock guitarists).

I don't have enough good things to say about this shop. Are you used your music shop being being run by snotty musicians who judge you based on the skinniness of your jeans or number of piercings? Well, this ain't that shop. James, the owner, is super helpful and knowledgeable, and stocks his shop with really top quality gear. I'd recommend this place primarily for pedals and amps, as well as for checking out some small batch electric guitar manufacturers (like their gorgeous Asher collection). That being said, they have a really nice selection of Breedloves, Rain Songs, Guilds, Martins, Gibsons in the acoustic section as well. They also do top-notch repair on equipment. I brought in my Princeton Reverb for a speaker swap, and the work was completely cheaply and flawlessly. They definitely have a loyal customer in me going forward!

There are many different kinds of pickup selectors. The most common forms of pickup selectors are 3-way and 5-way switches. Obviously, a 5-way switch gives you more pickup combinations than a 3-way switch. Below are some diagrams of what 3-way and 5-way pickup selectors can do. In choosing a pickup selector, I suggest that you try to replace your pickup selector with the same kind of selector. Refer to the manufacturers website and wiring diagram to get the right specifications. Notice I said to get the same “kind” — not the same one. It would make no sense to replace a cheap selector with another cheap selector. Find out the specs on the old selector and buy a nice one.

Although most of us who participated in this article have years of experience with guitar amps, none of us was particularly familiar with all the latest beginner models. There are few reliable professional reviews of beginner amps, but I sorted through what we found, searched through music stores and websites, and sampled numerous models at the recent National Association of Music Merchants (NAMM) show in Los Angeles. This experience gave me a good idea of what’s available now.
Don't just slap an effect on a track: why not try using automation to apply effects (in this case delay) on single words or phrases to make them stand out? Modern audio sequencers make it very easy to play around with spot effects — that is, effects which are applied to single notes or phrases within a track, rather than to a pattern or track as a whole. Try using different reverb styles on the snare within drum patterns: a short decay on the '2' and a long decay on the '4' for example. Another idea is to apply spot chorus to individual words within a vocal line, as a way of adding emphasis to the lyrics. The 'freeze' or audio bounce-down function of a typical sequencer allows you to get around any problems your computer might have in running lots of instances of a particular effect. Stephen Bennett
The way that manufacturers state the wattage output of an amplifier can be confusing. Amplifier manufacturers may state that a combo bass amp produces 600 watts at 4 ohms and 300 watts at 8 ohms. If the speaker mounted in the combo amp is an 8 ohm speaker, then the combo by itself will only produce 300 watts. This combo amplifier will only put out 600 watts if an "extension speaker cabinet" is plugged into the combo amp with a speaker cable. Plugging a second 8 ohm cabinet in parallel wiring with the combo amp's internal 8 ohm speaker will lower the amp's impedance (electrical resistance or "load") to 4 ohms; at this point the amp will put out 600 watts. Another factor that can make it difficult for bassists to select a bass amp is that different manufacturers may state their amps wattage in Root Mean Squared (or "RMS") and in "peak power". For example, a bass amp ad may state that it produces 500 watts RMS and 1000 watts "peak power". The RMS figure is much more important than the peak power wattage.
If your instrument receives regular maintenance, then you are likely to avoid any unneeded guitar setup cost. A properly cared for guitar will be regularly cleaned, oiled, and treated gently at all times. Of course, this is not possible for all people, as their preferred style of music may negate the ability to treat a guitar gently (metal and punk are good examples). Having the guitar setup can be thought of as maintenance in itself, as it is an invariable need in environments that have inconsistent weather patterns (which would be virtually all of them). The cost of a guitar setup can be insignificant if you maintain it on a regular basis.
I disagree. Through the years I've owned many amps and many pedals, and played with numerous setups to get different sounds. My absolute favorite setup and sound I have had is my Les Paul straight through my JCM900. At most, I'll add a wah in there. That is my ideal setup. I've played many different styles over the years, and used many techniques. My playing has evolved as I went along, and started taking pedals out of the mix. I think pedals are a great thing, and if you want to use them, you should.
Most people who use this alternate tuning method change the pitch of the sixth string only, the low E, from E to D. This is frequently used for Rock songs when you want a darker tone, such as with Heavy Metal. In addition, dropping the E string two steps to D means that you can play power chords with one finger. Some people also drop the first string (high e) down to D, resulting in D-A-D-G-B-D.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: epiphone","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"epiphone","prop5":"[mf] shop: guitars: electric guitars","prop6":"[mf] shop: guitars: electric guitars","prop3":"[mf] shop: guitars: electric guitars","prop4":"[mf] shop: guitars: electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category"}
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally. (more...)
There were differences between the pickups as well – the National had slanted units under enormous covers, while the Supro featured 8-string versions of the Alnico V pickups found on many Spanish-style guitars. The difference in tone proved to be minimal. The Supro has a more refined sound than its cheaper cousins with the famous string-through pickup, but it can still be raw and biting when required. Although it is a single-coil pickup, it has excellent hum rejection and sounds wonderful either overdriven or clean. The guitar has plenty of sustain and a surprising level of output, making it an excellent instrument for rock and roll as well as country music.
Fast forward to 2018 and ESP is still going strong, with a huge range of speedy guitars tailored for heavy rock and metal, including several 7- and 8-string models. ESP offers a range of popular models in the budget market (under its LTD subsidiary) as well as high-end guitars, played by some of the biggest names in heavy metal – Kirk Hammett, James Hetfield and Stephen Carpenter to name a few.
The two most prominent electric guitar brands overall are Fender and Gibson. Although you won't find guitars with those labels on the headstock in this price range, both of them have sub-brands under which they sell their entry level models: - Fender owns the Squier brand and Gibson owns the Epiphone brand. Other well-known brands that have guitars in this price range include Dean, ESP, Ibanez, Jackson, Kramer and Yamaha and Washburn.
I have been a musician for many years now. I have played in everything from metal bands to acoustic coffee house sets to worship/praise bands. I feel that with these many years of playing I have earned a sharp ear, no pun intended. By that I mean that I have developed an ear not only to hear pitches, tones, and notes, but I can also hear good and bad timbre. I feel that Taylor guitars simply produce the best timbre of any acoustic guitar I have played. Naturally, all of my acoustics are Taylor! With that, thanks to Bob Taylor for doing it best and doing it right the first time!
Yamaha F-310 Acoustic Dreadnought guitar in very good-excellent used condition no cracks or issues it looks great and the neck angle is excellent as well so as a result this guitar plays well with good fingerboard action with plenty of room on the saddle to lower action even more in future years if ever needed. Frets look good at 90-% with no ruts on fingerboard noted, truss rod is working fine, nut is 1-11/16ths. Yamaha specs (all of the F310 are made like this). It has 20 frets and a slim taper neck,The top is spruce, laminated, with natural finish. The sides and back are made of Meranti Indonesian Mahogany type wood , fingerboard and bridge are made Indian Rosewood, and the neck is of Nato. It's a full dreadnought guitar style, and just looks great.this one is in exceptional used condition better than average. Sound is good with nice volume and its tone is getting mature,,nice tone. No Cracks no issues no repairs and looks to have a bone nut and saddle this helps it have such a mature natural tone, Its sounds better than other F310’s Ive played I like this guitar and its price is right. any questions or to buy this guitar contact Joe at: .
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.
Our list of best electric guitar brands will remain incomplete if we do not add Schecter in it. Schecter Guitar Research is a firm that evolved from a startup into a guitar giant during the recent years. Aimed mainly at the heavy metal side, Schecter produces several guitars that metal players look. However, players from all genres will find something of their wish at Schecter as it touches every side of this domain. Created with the utmost care, delicacy, and artisanship, these guitars exhibit the most amazing and high-end features that suffice to surpass most expensive brands in the market today.
The Limited Edition Slash Firebird Premium Outfit also features Epiphone's rock solid nickel hardware including a classic Epiphone LockTone ABR Tune-o-matic bridge and Stopbar tailpiece, Kluson Reissue Firebird Banjo-style machine heads with a 12:1 ratio, a Switchcraft 1/4" output jack, and Epiphone Straplocks. A standard Epiphone hard case is also available.
You should add the plugins on They are all free and are great. They use them as tools to help them design physical amps, so they are very accurate and almost zero-latency. They have a few amps and pre-amps, 2 OD pedals and even a cab modeller which is more than enough to get you started. The Emmisary is a freakin' miracle. It can do any tone (I use it for metal, blues, clean) but it's best for molten, in-your-face heavy metal since it has a 4-way EQ on the lead channel.
Martin makes classic guitars that have been featured in countless hit tunes. While they are best known for their top-of-the-line $2,000+ models, Martin also makes great guitars for any budget. Martin guitars always honor their tradition while continuing to strive for a better instrument. Give Martin’s new 17 Series a try if you want to see that theory in action.
The metal guitars that emerged in the 80's were simply geared towards people into metal, aesthetically geared that is, since all guitarists in every genre want guitars that are easy to play. Their main benefit was in introducing better tremolo systems - the locking nut and fine tuners on the trem so you didn't have to unlock the nut to make fine tuning adjustments. I had one on my Stratocaster, you could go nuts with the whammy bar and it would stay locked in tune.
This interactive package (complete with a book, an instructional CD, a wall chart poster, a guitar pick and three sheets of fretboard stickers) equips the novice with everything he or she needs--short of an electric guitar and an amplifier--to become competent to play in a band within three months. The course is divided into twelve weekly lessons. Each lesson outlines the objectives of the week ahead and concludes with one of twelve specially commissioned backing tracks over which the novice can use the newly learned techniques. The book concludes with tips how to get the right sound from a guitar, amplifier and effects, as well as tips on forming a band, playing live and recording. If you've ever wanted to play in the band instead of just watching it, now you can!
Washburn - With a long history that dates back to 1883, Washburn makes various types of guitar related products including electric, acoustic, bass, amps, banjos, mandolins and amplifiers. Their old acoustic guitars were involved with Delta blues back in the 1920s, while now, they are recognized mostly for their metal/rock friendly electric guitars.

In addition to the Valvetronix, Vox has developed a line of analogue effects pedals. Dubbed Cooltron, the line provides guitarists with vintage sounding overdrive, compression, boost, distortion and tremolo. The pedals use low-power 12AU7 tubes to create vintage soft-clipping preamplification. Two of the Cooltron pedals, the Big Ben Overdrive and the Bulldog Distortion, won the Guitar World magazine Platinum Award.[3] Cooltron pedals:

Lastly, there is a core group of survivors in this company. Nice people but probably not the most dynamic or skilled. That said, they manage to get the job done under some pretty trying circumstances. Getting hired and quitting or getting fired after 6 months makes their job much more difficult because they needed to train you and it takes time away from their work only to have that person leave. If you don't have what it takes to work here then stay away because this causes more harm to all involved including yourself. There are people working under stress with families to provide for who don't need to get hosed by some 'guitar dude" who couldn't cut it. In summary, don't get starry-eyed because you think guitars are cool and that will carry the day. Think about what this place will do to your credentials and ability to move on to the next stage of your career which working at Gibson will force sooner than you expect and by all means, be considerate of those special folks who will have to re-fill the gap after you leave.

Ah yes, the 808. It's often used and referred to as a kick, but it tends to act more as a very low tom, as it has a pitch. This thing is the Loch Ness Monster – there tends to be more under the water. The best way to deal with a true, clean 808 sample is to work around it. It's usually best to let the 808 do its thing and to get the bottom end around it the hell out of the way. If it's a fuzzy sample or has been driven and squashed, you may need to play with things above 250 Hz, but usually live and let live is the best approach.
Received it right on time. It was a gift for my best friend and it turned out to be a lot more beautiful than expected. The shade of blue looks real classy and different in different lighting ! Yamaha is known for its magical sound and they maintain their name with this piece too! The guitar comes tuned , and sounds absolutely amazing ! Other website reviews say that it's not as loud, I didn't think so. It has a complete resounding sound that is pleasing to the ears ! My friend went in shock at the surprise and I went in shock with the unexpected high quality ! Definitely recommend, as a beginner or a pro, it's an easy to handle guitar that cradles comfortably between your arms and sounds perfect.

FRET LEVELING ("Filing", "Dressing"...) $150.00 and up. Worn or uneven frets can he filed level in many cases, if there will remain enough height on the fret to suit the customer. Frets must be lowered to the height of the lowest pit that can be found. Sometimes, replacing the most worn frets is appropriate. Includes "set up" adjustments.Add $25.00 for finished maple fretboards.
However much you swap your guitar’s pickups, strings, and wiring configuration, tweak your amp, or revamp your pedalboard, you will never achieve the golden tone that rings in your head if you don’t take one tip to heart: it all starts with the wood. Sure, these are electric guitars, and all the electronic components in the sound chain will affect what comes out of the speaker, but they are acoustic machines first and foremost. Hit the strings with your guitar unplugged, and it still rings and resonates, and the sound you hear—even with no electronic devices attached—still defines the core of your tone. And to make sure this is the right tone for you, or to avoid fighting a tone with endless component tweaks that never seem to satisfy, you need to understand a little bit about how all that wood sounds.
Harmony's market share of entry and intermediate-level instruments was it's downfall in the mid-1970s, as it found itself unable to compete with the competition from overseas (particularly Japanese) manufacturers. The higher-end American companies like Guild, Gibson and Fender struggled to some extent too, but the imports were generally aimed at student guitarists rather than professionals.
Basic distortion boxes can be built around a simple network of transistors and clipping diodes, to both boost the signal and alter the waveform. Most units, however, very roughly resemble the standard mass-production overdrives detailed above, with the heavy work done by opamps, some tone-shaping stages, and input/output buffers. The ProCo Rat set the standard for heavy distortion sounds above and beyond the capabilities of the MXR Distortion + and the Ibanez Tube Screamer, although in fact its design is surprisingly similar to the former (discussed above), with silicon diodes in place of germanium, and an added tone control.
Compared to the guitar amp rankings, the bass amp list is largely dominated by heads rather than combos. Notably, many of the entries on this year's rankings come from the recent wave of ultra-portable, Class D bass amp—a topic we've covered before. Clearly, this subcategory of bass amp is dominating the market, and it's likely that there will be at least a few new entries under that heading at NAMM next month.
A DPDT (2PDT or 2P2T) on/on switch has two channels (poles), each having three lugs. This is like having two SPDT switches in one. It’s the standard configuration for most push/ pull or push/push pots, and you can use it for almost all mods, including the seven-sound mod (if you leave one pole unconnected), coil-splitting a humbucker, out-of-phase mods (by adding some jumper wires from pole 1 to pole 2), a direct-through mod, and countless others. Let’s see what’s going on here.
The truth is that you can play any genre of music with just about any type of electric guitar. Many blues players run Gibson Les Pauls with beefy humbuckers, while Iron Maiden completely broke the stereotype that you can't play metal with a Stratocaster.  Guitar effects pedals really changed the game too. However, some guitars do actually deal better with certain music genres.

Open tunings improve the intonation of major chords by reducing the error of third intervals in equal temperaments. For example, in the open-G overtones tuning G-G-D-G-B-D, the (G,B) interval is a major third, and of course each successive pair of notes on the G- and B-strings is also a major third; similarly, the open-string minor-third (B,D) induces minor thirds among all the frets of the B-D strings. The thirds of equal temperament have audible deviations from the thirds of just intonation: Equal temperaments is used in modern music because it facilitates music in all keys, while (on a piano and other instruments) just intonation provided better-sounding major-third intervals for only a subset of keys.[65] "Sonny Landreth, Keith Richards and other open-G masters often lower the second string slightly so the major third is in tune with the overtone series. This adjustment dials out the dissonance, and makes those big one-finger major-chords come alive."[66]
Through the late 1960s, Westheimer offered a wide range of Kingston instruments including electric basses and hollowbodies (and even amplifiers). By the mid-1970s, it was becoming increasingly expensive to build guitars in Japan, so Westheimer shifted production to Korea by building a factory there, which became Cort. Kingston guitars existed in one form or another through the 1970s and even in the early 1980s, but Westheimer was finding great success building budget and entry-level guitars in his Cort factory for big U.S. guitar companies such as Kramer, B.C. Rich, and Epiphone.
Make sure you have a sharp pair of wire cutters and a pair of those pointy nose pliers for bending and cutting component leads. Don’t forget solder too. There are a whole bunch of solder specifications covering materials, size, process etc. You’ll need rosin core solder. It comes in different thicknesses. 0.031” diameter is a common size, and will work for most pedal projects. Solder is normally sold in reels by weight. A 1/4lb reel will be enough to last a good few pedal projects. Lastly, get lead free, no clean solder. Although not strictly necessary for personal projects, lead-free solder is common now and safer. No clean, means that you can leave the flux residue behind without having to clean it off, and it won’t damage your board.
Not sure I would recommend this for someone over 11 or 12 who is genuinely serious about learning, I probably would have skipped ahead to something larger. But if you are looking for a "toy" that really could inspire a child to develop a talent, this guitar is an ideal choice. One word of caution... the amp/guitar connectors are standard size so there is nothing stopping one from connecting it straight to a much more robust megawatt amp! For the price, five stars easy.
As jazz-rock fusion emerged in the early 1970s, many players switched to the more rock-oriented solid body guitars. Other jazz guitarists, like Grant Green and Wes Montgomery, turned to applying their skills to pop-oriented styles that fused jazz with soul and R&B, such as soul jazz-styled organ trios. Younger jazz musicians rode the surge of electric popular genres such as blues, rock, and funk to reach new audiences. Guitarists in the fusion realm fused the post-bop harmonic and melodic language of musicians such as John Coltrane, McCoy Tyner, Ornette Coleman, and Miles Davis with a hard-edged (and usually very loud) rock tone created by guitarists such as Cream's Eric Clapton who had redefined the sound of the guitar for those unfamiliar with the black blues players of Chicago and, before that, the Delta region of the Mississippi upon whom his style was based. With John Mayall's Bluesbreakers, Clapton turned up the volume on a sound already pioneered by Buddy Guy, Freddie King, B.B. King and others that was fluid, with heavy finger vibratos, string bending, and speed through powerful Marshall amplifiers.
Now that we mentioned some of the exotics, it’s time to go back to the roots. Epiphone Les Paul Standard is as old school as it gets. Legendary LP body style that brings a no-nonsense combo of hardware has always been the way to go. I actually have one of these, and after years of playing it keeps surprising me. I’d say it easily punches way above its price range.
{ "thumbImageID": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange/H96901000006000", "defaultDisplayName": "Squier Affinity Series Stratocaster Electric Guitar with Rosewood Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Competition Orange", "sku": "sku:site51500000022270", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange-1500000022270.gc", "skuImageId": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Competition-Orange/H96901000006000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Slick Silver", "sku": "sku:site51500000022267", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Slick-Silver-1500000022267.gc", "skuImageId": "Affinity-Series-Stratocaster-Electric-Guitar-with-Rosewood-Fingerboard-Slick-Silver/H96901000005000", "brandName": "Squier", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!

The Sweetwater Used Gear Marketplace is a lot like Craigslist or eBay, only it's exclusively for gear, and it's 100% free — there are absolutely no charges or fees involved. Buying or selling, you'll be interacting directly with other musicians and audio enthusiasts, so we've included some tips below to help navigate your transactions. Learn More | Safe Shopping Tips

We’ll go through each type of guitar pedal from the likes of distortion to delay and everything in between, whilst keeping it super simple. We’ll leave out some of the more technical details as this is just a beginners guide to guitar effects pedals, but if you feel you’re ready for a complete guide on putting together a pedal board, then we have a more in-depth blog here for you to read: Read our how to build a pedal board blog.
Welcome to  We're a the online Kay Vintage Reissue web site of Rock N Roll Vintage Inc., a Chicago based internationally known vintage guitar dealer.  Kay currently offers the "Street Series" and a "USA Recording Studio" lines.  Kay plans to offer reissues of 12 popular models including the Barney Kessel and the Jazz guitar and bass lines.   The Street Series are authentic reproductions of Classic Kay guitars and basses.   The Recording studio series will offer models with exceptional hand built custom shop quality.  We offer the complete line of Kay Vintage Reissue Basses and Guitars.   These Kay reissue guitars and basses look amazing and play even better.  Currently the Kay K161V Thin Twin and K775V Jazz II guitars and K162V Pro and K5970V Jazz Special basses are available.
Started shopping here when I was just getting my feet wet with the music career, bought a Mexican Humbucker strat and went on from there. Over the next 3 years, after many pedals, amps, and other major gears, I've become a solid local musician. This place has the best service hands down to take care of your gear needs in your career, they find out what you need, let you demo the gear for as long as you want, and never forces you to make a purchase decision. I'm glad I can go to this place for all my gear needs and support, so I can spend most of my time on actual music. The employees are super chill, and you eventually get to know them and the bands they play in after a while. It's a really supportive community for local musicians.
It obviously wasn’t ideal for guitarists to permanently damage their amplifiers for the benefit of experimental tone. Nor was it practical for them to drag immovably large objects on tours. Luckily, increasing experimentation in guitar sound modification collided with the widespread manufacture of electronic transistors in the early 1960s, which replaced vacuum tubes and integrated synthetic distortion in amplifiers. As the transistor revolutionized computing, it also dramatically simplified the production of guitar effects and amplifiers, allowing compact design and portability with little overheating.

Fender also supply a variety of signature models, each with specifications similar to those used by a well-known performer. Custom Artist guitars are the Custom Shop versions of the Artist Series line, which significantly differ from the standard production models in terms of quality and construction, making these instruments much more expensive. As well as the other Custom Shop instruments, the Custom Artist guitars are available either as Team Built or Master Built items, some being exact replications of the specific artist’s original instrument, better known as “Tribute” series (featuring various degrees of “relicing”, such as Closet Classic, New Old Stock, Relic and Super Relic treatments, depending the model). Artists with models available in the signature range include:
Over the years, the Gibson Memphis factory has become synonymous with creating some of the most accurate recreations of timeless classics. From the ES-335, ES-345 and ES-355 to the compact magic of the ES-339, the Gibson Memphis factory has built legendary instruments that pay tribute to the vintage masterpieces of yesteryear. To up the ante, the Gibson Memphis factory is now offering Limited Edition runs, showcasing the creative talents of their phenomenal crew, while boldly moving forward into a bright future.
A pedal itself can have an effects loop, but the most commonly used place is on the amplifier itself. You'll see on most amps (but not all) some form of output labeled as Effects Send or Preamp Out accompanied by an input labeled Effects Return or Power Amp In, respectively. Both sets of outputs and inputs refer to the effects loop that you can add between the preamplifier and the power amp section of your amplifier.

000-28EC[10] and 000-28ECB: Two of the five “Eric Clapton” models. Same body size as the 000-15, but with the Martin short scale (24.9″). This artist signature model is constructed with higher-quality woods (especially the more expensive 000-28ECB constructed from Brazilian Rosewood, hence the “B”), a different shape to the neck, and more ornamentation around the edge of the body.
DIY Guitars is Australia’s home of the best guitar kits. We stock a large range of kits at great prices, which will be delivered to your door! Whether you’re looking to shred like a madman, or play some classical blues riffs, we have the guitar kit for you! We also stock high quality ColorTone guitar stains and plenty of guitar accessories to help make the perfect guitar to suit your needs.
With a neck made of mahogany and a body of maple, the Ibanez Artcore AF75 is one of the best hollow body electric guitars included on this list. Due to its hollow body design, this guitar has the ability to play well in all genres, ranging from country to hard rock, and is known for its high-quality tone and ability to maintain tune through long periods of playing. This is possible in part due to the pickups at the neck and bridge, reducing excess humming for clarity in tone and pitch.  The knobs at the base of the body have a super-grip design, making it easy to change the volume and tone between the neck and the bridge and utilize the three pickup selector. A pearl block inlay is included on the rosewood fretboard, making this 20 fret electric guitar a strong option to conclude this list.
PLUG THE PORES What you use to prep the body for paint depends on the chosen finish that you will go with. For a solid color finish you will want to fill any of the pores with a wood filler or Bondo glazing putty. I prefer Bondo because it dries quickly and sands smooth. Use one of those plastic speaders that you can get for mud at a paint or hardware store and press the filler firmly into the pores and gaps in the wood. Cut diagonaly accross and against the grain to fill the pores and gaps better. Use a sanding block and a 220 grit paper and after the filler dries to ensure an even flat surface. Only use your hands to lightly sand on the rounded edges or hard to reah areas of the guitar. The roundness of your fingertips can cause depressions in the woods surface so stick with the sanding block on the flat areas. Inspect the surface to see if any pores or gaps remain and repeat the steps if needed. Then clean the surface with a tack cloth to remove any dust.
A hard-tail guitar bridge anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument.[20] These are common on carved-top guitars, such as the Gibson Les Paul and the Paul Reed Smith models, and on slab-body guitars, such as the Music Man Albert Lee and Fender guitars that are not equipped with a vibrato arm.