What equally contributes to the Entourage’s place on our list of the best acoustic-electric guitars is its nuanced and bright acoustic sound. This signature tone comes courtesy of a select pressure-test solid cedar top and wild cherry back and sides. The electronics on this model are easy to use and compact, highlighted by a pewter plate giving the entire package a stylish appearance.
1959 is widely considered to be the pinnacle year for Gibson’s mid-century solid body electric guitars, and no 1959 Gibson model is more famous than the sunburst Les Paul Standard. At first a commercial failure, the model was eventually adopted by some the world’s greatest guitarists – Jimmy Page, Duane Allman, Mike Bloomfield, Keith Richards, Eric Clapton, and Billy Gibbons, to name a few. The rarity and celebrity association of the model has pushed the values of original examples into the stratosphere. Gibson Custom’s 1959 Les Paul Standard is a painstakingly-accurate replica of these highly-valuable guitars rendered in detail so intricate that even the chemical composition of the parts has been scientifically examined and re-engineered – and that’s just one small example. Sonically, visually, and tactilely, owning a 2018 Gibson Custom Historic ’59 Les Paul Standard is as close as one can get to owning a priceless original!
Okay first of all yes, John Mayer deserves to be on this list. I would've probably put him even higher. I understand if you don't agree but go listen to his Where The Light is album and get back to me on that. I think Eric Clapton should've made the list though. And, although I'm not a big fan of metal I can say as a guitarist anybody can go up and down scales and embelish notes and sound like a metal genius. The artists above put real soul into their music. I think you have an amazing list though. Many people probably would've have thought of some of the people on here… but what about Derek Trucks?
If you’re just getting started playing electric guitar, you’ve definitely come to the right place! Sam Ash is the ultimate destination for all of your electric guitar learning materials! We are proud to offer everything you need to learn how to play electric guitar including instructional guitar books, guitar instructional DVDs, guitar tablature books, guitar music books, guitar reference materials, and even guitar chord charts to assist in your learning! We also carry all the accessories you need to get started, including guitar tuners, guitar picks, electric guitar strings, guitar straps, guitar amps, guitar cables, guitar stands, and much more!
In terms of the electronics, Yamaha went with a System 66 piezoelectric platform. The preamp packs a standard three-band EQ couple with a built-in tuner and a flexible mid-range control. Needless to say, it gives you more than enough room to dial in a decent tone. Quality-wise, this might be the best acoustic electric you can get in this price range, period.
I always respond to these enquiries as I have played some in UK shops and like them a lot .Well designed and made though I am sure the odd duffer gets through like most imports .Trev Wilkinson did the designing ,though it should really read ,modifying ,as most are other makers basic designs,.The Les Paul lemon drop is superb judging by reviews and I loved their S types ..Worth the money it seems .I would prefer a Vintage Strat , 335 or Les Paul to the other cloned alternatives .I did buy an Epiphone Dot but after playing a Vintage 335 ,wish I had bought it instead .The ones I played were Chinese
8e FRETTE HAUTEUR La hauteur des cordes est réglée lors de la fabrication des guitares et des basses Ibanez. Néanmoins, plusieurs facteurs peuvent provoquer la variation de hauteur des cordes d'un instrument. Les guitares sont sensibles aux variations de température et d'humidité. Une hauteur de cordes trop importante peut rendre l'instrument difficile à...
Fender, or the Fender Electric Instrument Manufacturing Company, as it was properly known, was started in 1946, in Fullerton, California, by Leo Fender. The early designs effectively wrote the book on the solid body guitar manufacture; his approach of simple guitars using quality parts, easily assembled (most specifically the replaceable neck) proved an immediate sucess. Guitars like the Fender Stratocaster, Telecaster, Jaguar and Precision bass have barely changed since their very first inception; Fender simply got it right first time round.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.
At least one company, Audiovox, built and may have offered an electric solid-body as early as 1932. Audiovox electric guitars were built by Paul Tutmarc who is also credited as the co-inventor of the magnetic pickup along with Art Stimpson, and the fretted electric bass guitar. Bob Wisner worked for Paul converting tube radio amplifiers into guitar amplifiers and eventually developing his own amplifier circuits so Paul's instruments could be sold along with their own amplifiers. Paul was unsuccessful at obtaining a patent for his magnetic pickup as it was too similar to the telephone microphone coil sensor device. Audiovox production was handed over to Paul's son, Bud Tutmarc, who continued building these instruments under the brand, "Bud-Electro" until the early 1950s. Bud Tutmarc had been delegated by the senior Tutmarc the task of winding the pickup coils used on his father's and he continued producing them for his own guitars. He used horseshoe magnets in a single-coil and later a hum cancelling dual coil configuration. Bob Wisner was hired by Rickenbacher, later spelled Rickenbacker and may have passed on Tutmarc's magnetic pickup technology and helped them develop the more familiar bar magnet and pole-piece pickup construction still widely used today for their cast aluminum electric guitar, nicknamed The Frying Pan or The Pancake Guitar, beginning in 1933.
Micro size and simple for live performance. 4 types of guitar effect in one strip: compressor, overdrive, delay and reverb Design for blues, jazz and country music etc. Max. delay time: 500ms Aluminum-alloy, stable and strong, LED indicator shows the working state. Sonicake Multi Guitar Effect strip Sonicbar Twiggy Blues is an effects pedal combo for roots/outlaw rockers. It combines the four most important effects: compressor, overdrive, delay and reverb in one, and it features a built-in cabinet simulator for getting a real stack sound straight from the PA system. It’s a tool that can take you back to the 60's, to that golden age of rock n' roll. Taste it! Specification: Power: DC 9V 5.5x2.1mm center nagative, 105mA Max. delay time: 500ms Dimension: 262mm ( D ) x 64mm ( W ) x 4.
Hybrid bass amplifier heads typically pair a tube preamplifier with a solid-state power amplifier. This provides the player with the best elements of both amplifier technology. The tube preamp gives the player the ability to obtain tube amplifier tone, which tube enthusiasts state is "warmer" than a solid state (transistor) preamp. As well, tube users state that tube preamps have a more pleasing-sounding, natural tone when the preamp's volume is pushed up so high that the bass signal becomes overdriven; in contrast, a solid state preamp that is pushed to the point of signal "clipping" can be harsh-sounding. Some hybrid amp heads have a bypass switch, so that the tube preamp can be bypassed, if the tube breaks or develops a technical problem. The tube preamplified signal in a hybrid amplifier head is then sent to a solid state power amplifier. Compared with tube power amps, solid state power amplifiers are more reliable, require less maintenance, less fragile and lighter in weight. A hybrid tube preamp/solid state power amp thus provides a bass player with the benefits of both technologies' strengths: tube preamp tone and solid state reliability for the power amp.
It was Berry’s songs from the late Fifties with cut boogie patterns—like “Roll Over Beethoven,” “Johnny B. Goode” and “Carol”—that realized electrically the guitar ambitions first dreamt by Robert Johnson. Berry’s tone—courtesy of a hollow-body Gibson through a tweed Fender amp—was raw and loud. This, along with his duckwalk, ringing double-stops and songs about cars and girls, grabbed the youth market. Tall and handsome, he brought the guitar as the “cool” instruments to a ready audience via appearances on TV and in movies, in a way that the Beatles would repeat in the early Sixties.
Recently had an Epiphone acoustic...irritating twangy sound and always falling out of tune. The body of the guitar is so large it's uncomfortable, even holding down the strings felt as though I would be drawing blood any minute. I hated to practice because of the sound & pain, traded it for the warm sound of the fender. Not only am I playing better, but holding down the strings doesn't hurt nearly as much (a little expected) and I can't wait to hear it. Now I understand how the phrase "it's music to my ears" came about. I'm in love with my Fender.
International shipping and import charges paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab International shipping paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping is paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab
For an experienced guitarist, the choice of amplifier is personal and a major part of the guitarist’s sound. But most of our panelists thought that, for a beginner, it’s most important for an amp to offer a variety of good sounds so that they can find what works for them and make adjustments as their style and taste evolve. As Ken Rosser put it, “If a kid’s starting out and they’re really into Pantera, they’ll love an amp that gives them that sound, but next year they might discover Eric Clapton and want a different sound.”
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: 3-Color Sunburst
Collings Guitars is an Austin, Texas based stringed instrument manufacturer. The company was founded in 1973 by Bill Collings who is “one of the most recognized and respected names amongst aficionados of modern acoustic instruments.”[ Their acoustic guitars have been highly regarded for decades.In addition to acoustic guitars they also make electric guitars, archtop guitars,mandolins, and ukuleles.
Though the guitar is played through an amplifier which is often miked and recorded, the engineer or producer may later decide to use a different amplifier tone that's better suited to the character and timbre of the song, while preserving all the nuance and inflection of the original performance embedded in the direct track. The re-amp device allows the dry track to be sent to an amplifier again and properly miked and re-recorded for use as the final track.
Harry Rosenbloom, founder of the (now-bankrupt) Medley Music of Bryn Mawr, Pennsylvania, was manufacturing handmade guitars under the name "Elger." By 1965 Rosenbloom had decided to stop manufacturing guitars and chose to become the exclusive North American distributor for Ibanez guitars. In September of 1972 Hoshino began a partnership with Elger Guitars to import guitars from Japan. In September of 1981, Elger was renamed "Hoshino U.S.A.", retaining the company headquarters in Bensalem, Pennsylvania as a distribution and quality-control center.
While he could put out an album of his farts or slap his name on any shitty guitar and still make millions, he is a painstaking perfectionist who spent years agonizing over every minute detail of his EVH Wolfgang guitar and EVH 5150 III amp before offering it to the public and who has refused to release a new Van Halen album until he feels it’s ready.
These are world class guitars and have got probably the best feel any guitar can give apart from that u can play everything on these guitars from classic rock to jazz and blues followed by metal. the main thing that these guitars are known for is their finish and there unique necks which are really fast and not too thin which keeps your tone and feel in place. I would say that these guitars definitely deserve a place in the top 3 and definitely do watch out for the petrucci signature models
An awesome acoustic-electric guitar at affordable price! I felt like this is one of my smartest purchase. I have an OM one with very beautiful look - ivory-color spruce top and chocolate-color back and side. The guitar comes with built-in Fishman pick-up and tuner. It has bright and sweet sound on picking, while having strong and resonant sound on strumming. With capo, the tone can be transformed to be soft and deep suitable for sad songs. Most importantly, it is a full-sized guitar playable by a lady with small hand and short arm like me!
Microphonic Pickups: Generally this is more of a problem with covered humbuckers, and more often than not it is caused by vibration of the cover itself. The easiest way to determine if this is the cause is to remove the cover. Typically there are two solder points which need to be de-soldered. If the microphonic condition goes away, you have four options. The first is to leave the cover off. This will affect the tone if the metal cover is magnetic, otherwise it will not. However, the cover does provide protection for the pickup and I'd advise leaving it, the pickup was designed to have a cover. Second is to have the pickup wax potted, this involves setting up a wax pot, and there is risk of damage to the pickup. Third is to apply a layer of silicoln inside the cover and seat the pickup in the cover before it dries making sure not to push it all out, but getting it up around the sides of the pickup. This is safe, easy and effective, but makes a mess of the pickup for future repair. (not a big concern IMO) The fourth option is to do a partial wax potting. Get some parafin from the grocery store. Boil a small pan of water then remove it from the heat. Place a chunk of wax in the cover press the wax into the holes to prevent water getting into the cover, and hold the cover on the surface of the water with a pair of tongs.As the wax softens spread it around and up the sides with a spoon. Resoften the wax until you can easily seat the pickup in the cover. This is much safer and easier than true wax potting.
Let us move from the best amplifiers among the mid range priced small amplifiers to the more affordable ones. The gap between affordable and less affordable has never been felt this much, in terms of money of course. In terms of quality, the gap is not that noticeable, especially not when you have a contender like the Orange Amplifier Micro Crush PiX 3 Watt 9-Volt mini amp. This little orange cube of happiness provides the side of the person it spends it time at, with a whole lot of brightness and a seeming ray of light. Whether it is because of the bright coloring of the amp, or because it is actually a great sound being amplified from it. Whatever it is, I really do enjoy this little piece of vocal citrus, especially since it has the best combination of so many important qualities for an amp. It sounds good, it looks good and it is so easy to maintain and carry with you wherever you go.
I've had my Dorado, model #5986, serial #41 since 1972 and have used it for classical guitar study off and on since getting it as a gift. For what it is, the sound quality and playability are quite good. I'm donating it to a church rummage sale tomorrow (6/3/07) and will remember it fondly. I have an Alvarez Regency, similar to the Dorado, which lacks the sound character.
The music industry is one that has really felt the effects of the digitalization of the world over the last few decades. In the 1970s and '80s, recording, composing and production work would have been done manually with a complicated series of hardware mixers, synths, sequencers and other devices. Today, all you have to do is plug into a computer running the music software that's relevant to the task. These programs and tools don't only make it possible for you to work faster; you can also get started sooner, since a large selection of software packages are available to download directly. You won't need to wait for shipping: just download and start working.
The Gibson 2017 has a truly amazing setup and it played nicer and felt better than most models in its class. The tone is deep and throaty, and ab0ve all, it’s 100% Les Paul. What actually made the big difference in this electric guitar is the upgraded electronics and wirings with very minimal feedback and sustain. There is no buzzing or excessive string vibration. All that you get is a superb, perfect fit and finish.
airline guitar Airline Guitars amp amps bass guitar danelectro eastwood guitar Eastwood Guitars electric guitar electric guitars fender george harrison gibson gibson guitars guitar guitar amp guitar amps guitarists guitar lessons guitar review guitars Guitar Theory guitar tips harmony guitars japanese guitars japanese made guitars jimi hendrix kay guitars les paul lessons mosrite NAMM Updates rare guitar rare guitars silvertone teisco the beatles tips tone tremelo valco vintage amp Vintage Amps vintage guitar Vintage Guitars
4) SPAM AND SELF-ADVERTISING ARE NOT ALLOWED. NO ADVERTISING YOUR NEW SUB. NO LINKS TO SOCIAL MEDIA, BLOGS, OR OTHER PERSONAL SITES. This includes the comment area of youtube videos as well as anything that's embedded into the video itself. Your content will be removed!!! NO ADVERTISING EVEN BY PROXY Ask yourself if you're here to post a video of yourself playing guitar or to gain subscribers/fans. If it's the later, you are in the wrong place. We are not here to make you more popular. This means no linking to anything that is commerce related, your blog, web site, bandcamp, facebook, instagram, snapchat, twitter, etc. You can link to your youtube channel, but do NOT have channel plugs/ads in your video, subscription requests, or links to any of the aforementioned, unless you are on our whitelist. If you would like to be considered for our whitelist, message the mods!
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
This beast features a classic Sitka spruce top with a rosewood back and sides combo. We have already mentioned a few guitars that feature these types of tonewood. However, the difference here is that the Martin DCPA4R is a handmade instrument that brings you the craftsmanship of Martin's top luthiers. If you appreciate craftsmanship, you'll love this instrument.
Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.
The Givson Guitar Corporation makes guitars which sell under various brand names and are considered as among the best guitar brands on the planet. The company is famous to have devised the arch top guitar and created a few of the most iconic instruments in guitar history. Some iconic versions are the SG, Explorer, Flying V, ES 175 as well as the Firebird. The Les Paul Melody Maker is a popular model amongst many guitarists in different countries.
The Blues Harp has been around since the early 1970s. Until the 1990s, it was functionally identical to the Marine Band, the only differences being the cover plates and the varnish on the front of the wood comb, and the Blues Harp's profile was thinner as well. At one point, Johnny Cash promoted the Blues Harp. In the 1990s, Hohner made the Blues Harp part of its Modular System (MS) line. This new Blues Harp lost its uniqueness, and is interchangeable with the other models in the MS line, but it currently remains the standby of many players who use MS harps.
Selling my guitar rig i used here in RSA Not splitting up 1 x tech 21 sansamp psa1.1 preamp,studio standard 1 x crate Powerblock 150w mono or 2x 75w stereo amp 1 x 4x12 quad box,custom built with plywood not cheap chipboard, loaded with celestion G12s All as good as new Too heavy to ship overseas Can swop for something lighter i can carry on a plane
Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
It’s yet another Hal Leonard book (that guy really wanted you to learn to play), with the same audio perks as the guide above. This guide is perhaps a little over the head of most beginners, but if you grapple with it early, the rewards could be considerable. Fourteen scales across 96 pages means this isn’t an enormous volume of information to digest, so give it a whirl.
Kramer Guitars is the manufacturer of electric guitars & basses originated from America. Inearly’s off origination in 1970’s, they produced aluminum necked electric guitar& basses & in later 1980’s they started producing wooden-necked guitars catering to hard rock and heavy metal musicians. This is the brand of guitar that challenges the quality of guitars made by Gibson. Made of maple wood and aluminum inlays, this makes one of the finest make of bass and electric guitars. These are highest priced electric guitar which starts from 90,000 to 1.5lacs. These are one of the most powerful ranges of electric guitars used by professional musicians.
There are tons of new tidbits of FU-Tone.com news! First off we would like to welcome Stephen “Stef” Carpenter of DEFTONES to the FU family! Recently I started working closely with Rem Massingill (Stef’s Tech) on this monster project. It started as most of these projects do – with lots of conversations and planning before turning the first screw. I work with dozens of techs in this business and I can tell you that Rem is “one of those guys”. He really knows his stuff, is a stickler for details and most importantly he knows TONE! Little did I know what I was getting into and the first two guitars on the slab were ESP 8 String models! This was out of the normal scope of my 6 and 7 string clients… I consider the guitar and guitar tone a never-ending learning process. I am constantly looking to learn from anyone that I can on my journey. Anyone who presents themselves as a know-it-all is full of shit or trying to sell you something (usually both!). After lots of twisting, tweaking and testing we got this off the ground and I am here to tell you that the tone was massive and bone crushing all while having an insane amount of note separation and clarity! Not to mention sustain for days that would make Nigel Tufnell jealous… As I stood on stage with Stef and Rem at sound check in New York while he put the 8 String ESP through its paces, I was pleasantly surprised to hear how brutal the tone was. All of the power and growl of a monster truck with the precision and control of a Ferrari. The smile on Stef’s and Rem’s faces said it all! This was just the first hoop that we jumped through together with a bunch of stuff in the hopper for these guys. If you have not been to a Deftones show on this tour, I highly suggest going out to catch them!
Mike Longworth’s book shows at least three guitar amplifiers carrying the Martin name from the early ’60s. Who made them is unknown… most certainly it wasn’t Martin. In 1961 Martin marketed a pair of combos, the Model 110T and Model 112T. Both had top rear-mounted controls and a very groovy geometrical grillcloths in a sort of M.C. Escher pattern. Presumably the 110 featured a 10″ speaker, while the 112 had a 12″. The “T” suggests a tremolo circuit. In 1962 Martin offered a very cool #700 portable amplifier, a unit ensconced in a leather carrying case, presumably battery-powered.
While it’s not as popular as the two previous brands we have mentioned, PRS is on a level of their own. American owned and made, these guitars are an epitome of quality and great sound. They have a completely unique appearance and offer a tone which has a distinctive color. Best thing about this brand is the balance price and performance. You get a lot more than you pay for with PRS.
Typically do not use any effects, but have an EQ, Sustain, and Room echo sim in my effects chain with Ampkit on my iPad that I use pretty much 100% of the time, but my goal is clean ,clean, clean. I'm still just a beginner so I am holding off do effects until I at least learn how to play. I play more Jazz then anything else. I even play metal clean so I can hear my technique.
Having spent years developing the JDX 48 and Headload, it only made sense that Radial would develop a solution for guitarists who didn’t want to use an amp at all; hence, the JDX Direct-Drive™ was born! The Direct-Drive lets guitarists choose between three different amp voicings: “Combo”, “Stack” and “JDX 4×12”, with further controls to adjust the brightness of the amp. The guitarist simply plugs in their guitar through their pedals, into the JDX Direct-Drive and out to the board with an XLR cable. There are additional outputs for attaching to onstage amps or speakers as well for guitarists who are more comfortable having volume with them on stage. The engineer can then mic the amp and mix the two signals together to get the best tone out of the PA system.
These prices reflect the opinion/perception of the editor of guitarrepairshop.com. while these are prices one could expect from a quality repair shop, repair rates can vary. A full time repairman can have as much training time and investment in tools as any mechanic. Shop overhead costs are on par with those of any other profession, so if you take your instrument to a professional shop, expect to pay professional rates. And expect professional work. While this list reflects prices one would expect to pay at a professional shop, rates will vary. Expect to pay by the hour for some extensive restoration jobs. Rates based on an hourly charge of $60.00 p/hour. Shop minimum labor charge - $60.00 Prices updated January 2014
Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
While musicians intentionally create or add distortion to electric instrument signals or vocals to create a musical effect, there are some musical styles and musical applications where as little distortion as possible is sought. When DJs are playing recorded music in a nightclub, they typically seek to reproduce the recordings with little or no distortion. In many musical styles, including pop music, country music and even genres where the electric guitars are almost always distorted, such as metal and hard rock, sound engineers usually take a number of steps to ensure that the vocals sounding through the sound reinforcement system are undistorted (the exception is the rare cases where distortion is purposely added to vocals in a song as a special effect).
Mention the subject of American acoustic guitars and one of the first names that will undoubtedly pop into your head will be C.F. Martin. Not that there aren’t many other estimable names, but Martin, by virtue of its longevity � since 1833 � and incredible quality remains the standard by which almost all steel-stringed acoustics are judged. A pretty impressive achievement.
The best way to get this sound out of an Octavia is by using the neck pickup on the guitar and by experimenting with the tone knob to get a more pronounced octave effect. Some other famous Hendrix tunes using the Octavia are “Who Knows” and “Machine Gun” from Band of Gypsies. If you want to put together a Jimi Hendrix pedal board, the Octavia is a must. There are many great reissues of this pedal on the market, but if you get a chance, like fuzzes, try a few of them next to each other. Even a few of the same pedal, as they often sound very different. One may have more of an octave effect, or be warmer sounding etc. This is due to the use of the transistors that can often have slightly different values that can make big tonal changes.
Kramer Guitars is the manufacturer of electric guitars & basses originated from America. Inearly’s off origination in 1970’s, they produced aluminum necked electric guitar& basses & in later 1980’s they started producing wooden-necked guitars catering to hard rock and heavy metal musicians. This is the brand of guitar that challenges the quality of guitars made by Gibson. Made of maple wood and aluminum inlays, this makes one of the finest make of bass and electric guitars. These are highest priced electric guitar which starts from 90,000 to 1.5lacs. These are one of the most powerful ranges of electric guitars used by professional musicians.
It features a solid mahogany top with laminated sapele back and sides, leading to a warm tone that’s a joy to listen too. Despite the small body size, the BT2 has a robust projection, thanks to the arched back. The neck is joined to the body via screws, which tarnish the look a little, but leave no impact on the slick playability or the tone, so aren’t a big deal.
The Fretted Synth website has mysteriously disappeared (the likes of Native Instruments not happy that they’re giving away so much goodness for free??), so we’re linking to the Rekkerd page that still seems to host the plugins. FreeAmp3 really shouldn’t be free: it features masses of sound-shaping potential and the user interface looks great. If you just want one (free) VST guitar plugin, get this.
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
If you’re looking for a unique sound that delivers an exaggerated twang, than the Gretsch G5422TDC Electromatic is the best electric guitar to offer these features. Designed with wider frame and a hollow body, this guitar utilizes “Black Top” Filter’Tron pickups to deliver a dynamic sound that is both bright and focused in its tone. The toggle has three positions that allows the user to customize the balance of the tone, and all strings on the guitar are able to deliver strong intonation due to the Adjusto-Matic bridge. The vibrato tailpiece adds resonance and depth to the sound quality, and by utilizing maple for the body frame there is a clarity provided within the tone that is unique to that design. With a three position pickup, open-back tuners, and a rosewood fingerboard, this retro style guitar provides a high-quality option for musicians alike. Here’s a great G5422TDC video for some samples of that warm hollow-body sound.
Berry snapped one up immediately in 1958 and has played the ES-335 or its slightly fancier relatives the ES-345 and ES-355 since then. A few years later the model was embraced by Freddie King. Alvin Lee made history with an ES-345 at Woodstock, speeding through “I’m Going Home,” and Larry Carlton’s incredibly lyrical ES-335 can be heard on great Steely Dan albums including The Royal Scam and near-countless other sessions. Whether equipped with humbuckers or P-90s, semi-hollow body guitars sound sweetly beautiful, but can also grind. Ultimately, however, they remain a middle ground between the electric solid body and the hollow body models.
Ibanez is the most important Japanese guitar brand, and this new book tells the story of the electric guitars the company has made since the late 50s. The story tracks the fortunes of Ibanez from its early years as a copier of prime American models to later success as a creator of impressive original designs. The big break came in the late '80s with the launch of Steve Vai's JEM models and the related RG design, which have ensured Ibanez's popularity among metal and extreme rock players. Players include George Benson, Phil Collen, Allan Holdsworth, Pat Metheny, John Petrucci, Lee Ritenour, Joe Satriani, John Scofield, Mick Thompson, and more, many of whom are featured or interviewed for this book. With a gallery of full-color pictures of famous guitars and players, a reference section detailing production years and specifications, and a section covering how to interpret serial numbers. 160 pp.
Jackson is USA based guitar company founded by Grover Jackson. The company is the manufacturer of electric guitars or electric bass guitars. These electric guitars have a pointed headstock and are a typical rock style guitar popular amongst rock and metal band members. This is the style of electric and acoustic guitar that has a sleek layout and style. Not only do they provide great style but also deliver a higher sound quality. The starting price of a Jackson electric guitar is 12,500 INR approximately.
Yes, most of them are very useful! These days there are hundreds of online tutors offering great guitar lessons. And there’s no need to throw your money at the first offer you see, as a lot of quality instructional and tutorial videos are completely free on platforms such as YouTube. Generally, paid courses tend to be better because they are tested and are well-structured, and – in theory – you should be able to progress faster. But it all depends on your budget and on your will to learn on your own.
"Mangoré, por Amor al Arte" is the title of the 2015 movie, the real life story of Agustín Barrios, an influential and important composer and classical guitarist from Paraguay. Born in Paraguay in 1885 talented Agustín was persuaded in his young adult age to move to Buenos Aires, the cultural hub of South America. In Argentina he began an affair with the beautiful Isabel but,...
Ate you guys just starting, or just bored? Curious is all, its seems that the ?s and statements alike are from beginners, which all of us started out with, there are many pro sites that will give you better advice. Advice at least boogie gave good support. Another thing is always wipe your strings down Everytime you finish playing. The slinky's are easy to play but rust very quickly and lose tone. GHS has a decent set of steings, but it's like anything else you get what you pay for. Come on guys ur talking about strings that are $4.
There is a legitimate physical aspect to the gauge of your strings that will affect how well you play. Bending and fretting becomes much easier and faster with a lighter set, but in my own experience you will have a “tinnier” tone that must be compensated for with your guitar and amp tone controls. Speaking of tone, lets look at how string gauge affects the sound you produce.
"I wanted my guitar to sound like Gene Krupa's drums," Dick Dale said, and the hyperpercussive style he invented for his jukebox wonders – including a juiced-up arrangement of the old Greek tune "Misirlou" – pioneered the sound of surf rock. Dale played as fast as possible, at max volume; Leo Fender once attempted to design an amp that wouldn't be destroyed by Dale's sheer loudness. "His arrangements were really complex, really unruly," said Rush's Alex Lifeson. "It was all staccato strumming reverb, but with a reverb that just sounded so cool."
Fender instruments like the Stratocaster and Telecaster feature bolt-on necks and brighter tonewoods such as alder for the body and maple for the neck. They are easy to work on, and an owner with even a small degree of technical knowledge can fit replacement parts without professional assistance. Fender guitars are built to a 25.5-inch scale length, which lends to their brighter, more percussive tone. You’re more likely to see tremolo systems on this type of guitar, and hot-rodded guitars known as superstrats fall into this category.
the top five in no certain order are…….. JIMI HENDRIX .NIO EXPLANATION NEEDED……..RICHIE BLACKMORE he broght the strat into metal and he led his leads perfectly back into the song ……… .EDWARD VAN HALEN he was the next innovater after hendrix…………DIME BAG DARRELL….he was just plain the baddast ass of them all…………..AND ENGWIE MALMSTIEN he did everything else……..there are lots of great guitar players . but .these five guys set the bar for everyone else
Tone shaping possibilities of overtone and spacious ambiance of Tera Echo is now versatile, thanks to the Boss’ flagship multi dimensional processing technology. Apart from those vintage options, the updated COSM preamps in this pedalboard include new additions like crunch and metal (for Metal Style players - see our review on the best Noise Gate pedals).
Bridges and Tailpieces – These two parts of the electric guitar work in unison to control the tone and playability of the guitar. The bridge is mounted on the lower portion of the guitar. The strings are routed over the bridge before ending in the tailpiece. Bridges help to tune the strings of varying length, thickness and metals and they allow easy adjustment of the string length.
Here we have a great D-28 clone from the finest Matsumoto Japanese guitar factory with a lot of history of making premium guitars Aria this is a AD-35 model these high quality D-28 copy’s were made in Japan for a short time frame of about a decade or so I believe discontinued in early to mid 1990’s for the Japanese domestic market not seen in the US until recently. Aria Dreadnought / Aria Auditorium SERIES The pursuit of perfection - This was Aria’s theme pursuing continuously ever since they started to manufacture guitars in 1956. This Aria Dreadnought / Aria Auditorium series lent brilliance to the early and middle days in the history of Aria acoustic guitar they know how to make great guitars this is model is no exception. The high standard for workmanship and materials are simply second to none. This instrument produces a Rich sound and offers the intermediate - pro grade playability from the determined beginner to the accomplished player. With its premium Solid Sitka Spruce top, will increase the volume and dynamic complexity of sound as you play it more and more. Noted Japan’s advanced finishing skills learned over decades this gloss vintage thin poly finish allows tone to jump of its sound box. AD-35 features Solid sitka spruce top and beautiful rosewood back and sides -bridge and fingerboard, the body binding, the center line of the body back and so on. I believe the original brochures specs were all solid woods on this run from Aria I look and can not tell you be the judge for yourself. This is recommendable model to guitar players who want to own a high end Martin D-28 but on a realistic budget you wouldn’t compromise much here surprisingly. This example has been upgrades here at JVGuitars with a Martin bone nut and compensated saddle - solid ebony decorotive with Abalone detail bridge pins and new set of Martin Marquis strings .... she has been fully cleaned and polished from headstock to bridge pin and natural rosewood re-hydrated with lemon oil We also leveled -dressed -recrowned-polished refined frets .... she plays and sound like a MUCH more expensive guitar now... sure to please for decades to come She’s a beauty and easily in 8.7/10 condition with a few insignificant blemish nicks - scratched we have addressed by lacquer tip color matched touch up and repolished Specifications: Top : Solid Sitka Spruce Back & Sides : Rosewood ... said to possibly be solid woods ... little is difinitivly known of this series just looking it looks to be solid you judge for yourself Neck : Mahogany Fingerboard : Rosewood Bridge : Rosewood Hardware : Chrome Finish : vintage gloss Hand crafted in Japan Vintage very good used condition Sound is really good!!! Contact Joe to buy it at firstname.lastname@example.org .
• Wound Up: String windings directly affect tone and playability. Round wound strings have more “zing” – sustain, responsiveness and bite. Flat wound strings have a smoother and more consistent tone regardless of attack, which makes them a favorite of jazz players, like the great Gibson ES-350 legend Barney Kessel. Blues guitar kingpin Jimmie Vaughan also uses flat wounds for his vintage tone. And they offer less resistance than round wound strings, so they can be beneficial for rapid, even toned performance and squeak less.
One question I get asked incredibly often, specially from beginner guitarists is: “What are the best guitar brands.” It’s a pretty valid question given that in just about every industry there are brands that are known to be the most desirable and most reliable (not always at the same time) and therefore, the best. However, it works a little bit differently in the guitar industry. Sound quality often goes on par with price. Reliability is measured a little differently than say, cars, as most guitar companies easily make very reliable instruments. Finally, desirability is usually based on price, looks, artist endorsement and more importantly again, sound-quality.
SWEET just in a famous Vintage Classic BOOMER Folks from Nippon Gakki RED LABEL 000 OM type Yamaha FG We have just done our JVGuitars set her up with our Martin Bone Nut & Compensated Saddle se as well as upgraded bridge Pins to solid Ebony with Abalone dot with brass ring and of course a new set of Martin Strings 80/20 Bronze 12's.. and this guitar Sounds like a true vintage classic This guitar is AWESOME and is in BEAUTIFUL Condition! Classic Martin 000 OM style copy from Yamaha this guitar rings like a bell with excellent intonation. No Cracks no problemo like so many of these I see and just pass unlike the majority this guitar has excellent play action and is super fun to play! If your looking for a well aged ( almost 50 years ) just try to buy a 50 year old Martin $$$$$$$$$$$ WoW... This guitar is a Boomer surprisingly so but I have carried these FG110 Nippon Gakki's for decades now myself and was always impressed by the good one's... This one will impress you too.... at this price point its hard to beat this old Nippon Gakki Red Label 000. True Japanese Vintage guitar it top vintage condition as seen... Ready to purchase contact Joe at: email@example.com Thank you for your interest in our quality Vintage Guitars, Joe Pics soon to come no worries its excellent!!!.
Epiphone does a great job of making instruments for all levels of guitar players, especially those looking for affordable acoustic and electric instruments. Epiphone is owned by Gibson, and therefore can make official copies of Gibson guitars like the Les Paul, SG and Hummingbird. Many are good enough for pro players to use in the studio or onstage.
Seagull is a Canadian company that produces hand crafted acoustic guitars. It has solid top guitars which offer richer sound, broader dynamic range, and sound becomes better as time pass by. The neck of the guitar of the seagull guitar has either Silverleaf maple or Honduras mahogany. Silverleaf is less permeable than mahogany that provides an incredibly smooth sensation but has an identical denseness. Some really good guitars from the line up of Seagull are Original S6 Cedar, Entourage Rustic S6, and Entourage Rustic CW QI.
“To extend valve life, turn your amp off after a gig and let it sit for a few minutes before moving it. And vice versa: as soon as you’ve got a power cable to your amp turn the juice on and let it warm up for as long as you can. Tone-wise, you can notice the difference between an amp that’s been turned on for only five minutes and an amp that’s been sitting there [switched on] for 45 minutes.”
Without a doubt, Instant Guitar is a bit messy when it comes to sound quality, and from the looks of it on the web, others agree. First, there are incredible tones here; Cathedral mode is angelic and the low chord hits are drool worthy, to put it lightly. The problem is that the more you shape your guitar to sound like an actual guitar, the worst the sound quality becomes.
Paul Gray (b. 1972 d. 2010) swapped his longtime association with Warwick basses for a customized version of the ATK bass series, the PGB1. He was impressed with the ATK bass after he bought one from a pawn shop and told Ibanez that he would endorse them if they put the ATK series back into production. He switched to his signature model shortly before recording of the Slipknot album All Hope Is Gone and used them until his death in 2010.
Before Nathan Daniel started the Danelectro company in 1947, he made amplifiers for Epiphone from 1934 to 1946. Epiphone wanted Daniel to make amps for them exclusively, but he preferred to stay independent. Instead he founded the Danelectro company in 1947 and started making amplifiers for Montgomery Ward. By 1948 Daniel expanded and became the exclusive guitar amplifier producer for Sears & Roebuck. At the same time he was also supplying other jobbers such as Targ & Dinner of Chicago.
Boss is well known for producing reliable and good sounding guitar effects, many of which continue to serve popular guitarists like Eric Johnson, Steve Vai, Marty Friedman and many more. Being a big player in one market doesn't always translate to success in another, but Boss' recent foray into the guitar amplifier market is proving to be quite successful, as evidenced by the consistently favorable ratings that most of their amplifiers are getting. To be specific, we are talking about the Boss Katana range of amplifiers, which combine Roland's (Boss' parent company) experience in amp building with Boss reputation for quality and reliability.
Taylor 214ce A ‘best acoustic guitar’ list would be incomplete without a Taylor in it. This Grand Auditorium guitar with a cutaway from Taylor projects plenty of volume and has a bright and defined tone that many fingerstyle players love. If you’ve always wanted a Taylor, this one with a solid top will surely stick with you for many years to come.
The first thing that strikes you about Nate Savage’s Guitar Lessons YouTube Channel is how well the structured, numbered lessons are organised on the YouTube Home page itself. Overlays on the opening titles screens and the names of the lessons make it very clear about the content and help you to choose exactly what you need, or let you skip over any unnecessary stuff. His complete beginner topics go right back to “How To Hold The Guitar” which might sound really basic, but Nate’s absolutely right to nip any bad habits in the bud at the very beginning and that particular video could the most important 3:26 of your career. And I have to make mention of the high production levels on Nate’s videos. The vision and audio is excellent, the lessons are well made, and Nate’s friendly, easy-going manner makes you feel like he’s your best friend and guitar tutor at the same time.
Bull necked and heavily tattooed, Mike Ness is not the kind of guy you’d want to mess with. The Southern California guitarist, singer and songwriter has known good times and bad, punching his way out of a serious drug addiction in the mid Eighties. He has funneled these experiences into some of the most hard-hitting, plain-dealing rock songs to come out of the SoCal punk milieu. Ness launched Social Distortion in 1978.
Unlike distortion or overdrive, fuzz is meant to not sound like an amp at all. It is meant to add harmonic content and transistor-like goodness to your tone. Fuzz boxes were used extensively in the 1960s to create an over the top distortion sound. Many times fuzzes will completely change the sound of your amp, so be careful and really focus on buying one that has the sonic makeup you are looking for. Hendrix, Cream-era Clapton, and Dan Auerbach are well known fuzz users.
The palm mute is a playing technique for guitar and bass guitar, executed by placing the side of the picking hand below the little finger across the strings to be plucked, very close to the bridge, and then plucking the strings while the damping is in effect. This produces a muted sound. It was popularized by Black Sabbath in the song "Paranoid". - winner333
Numerous classic guitars made by the likes of Gibson, Epiphone, Fender, and Guild are worth thousands, sometimes tens of thousands; a little expensive for the average player, and often these are the preserve of investors and collectors. Early versions of the Gibson Les Paul, SG and Flying V guitars, or the Fender Stratocaster or Telecaster. But there are still very many affordable, great sounding, and exciting to play vintage guitars that offer something simply not available in a new guitar. A well-built vintage instrument, although expensive can actually be superb value for money in comparison to some of the new guitars available at that price.
“He played an SG, a Les Paul, a Flying V, as well as a Stratocaster, but he always sounded like Hendrix,” Clive Brown states. “He didn’t suddenly sound like Jimmy Page because he played a Les Paul. That’s where everybody’s perception seems to go wrong. It’s the playing, and not necessarily the guitar.” In spite of an entire multi-million dollar industry revolving around selling musicians the latest gear, and in spite of thousands of axeslingers, aspiring and acclaimed alike, who readily gobble up that gear, it all seems to boil down to two implements— and we’re born with those.
Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.
There have been two documented 1970 Brazilian rosewood D-28's, which are anomalies. The first one was #265783, which was retopped with red spruce in 1993. The second one is serial number 265941. There are several D-35's with mixed woods in the 3-piece back. Like D-35 #258962, which has a Brazilian rosewood center wedge in the back. Note some post-1969 Martins have some Brazilian rosewood, in the bridge, bridgeplate, fingerboard, or peghead veneer.
Fender was started by Leo Fender in 1946 in Fullerton, CA. Leo Fender sold his company to CBS in 1965. In 1985 Fender employees purchased the company. Leo Fender founded Music Man in 1975, and later founded the G&L Musical Instruments company. Fender brands currently include brands include Fender®, Squier®, Guild®, Gretsch®, Jackson®, Charvel®, EVH®, Tacoma…
Interesting idea Mike. I suppose you could run some kind of DC bias through the selector switch together with the pickup signals and you’d have to introduce appropriate DC blocking capacitors to contain the DC bias within the guitar… probably possible but a lot of work to get it right. Alternatively you could just look for one of the “super switch” types with more than 2 poles so you can do the LED control on a completely different circuit but driven by the same switch e.g. https://www.premierguitar.com/articles/Introducing_Fenders_5_Way_Super_Switch
music is an expression with a variety of feelings involved.there is no such individual as the greatest guitarist.there are however a great number of highly talented,highly skilled and original guitar players.they encompass many genres of style ,technique,they should not be compared with each other.rather they should be appreciated for their individuality and that magnetism that makes them all unique.
1939: The #1 brace inside near the neck block changes from 5/16" wide to 1/2" wide, making it roughly twice as wide. This happened at the same time as the popscicle brace addition. The neck block thickness was also reduced by 1/4". About the same time neck width reduced from 1 3/4" to 1 11/16" at the nut, and the bridge spacing reduced from 2 5/16" to 2 1/8".
These special qualities have been used for centuries to create and build various instruments with differing levels of success. Some tone woods do it better than others so, are often more vigorously sought out and because of their growing rarity (due, primarily, to over harvesting) also vary in expense, the rarest most hard to find being the most expensive, of course.
Epiphone Les Paul Special II Player Pack New from$249.00In Stockor 6 payments of $41.50 Free Ground Shipping Silvertone SS10 Citation Electric Guitar Package New from$150.95In Stockor 4 payments of $37.74 FREE 2-DAY SHIPPING Silvertone SS11 Revolver Electric Guitar Package New from$160.95In Stockor 4 payments of $40.24 FREE 2-DAY SHIPPING Epiphone Slash Appetite for Destruction Les Paul Performance Pack New from$349.00Coming Soonor 8 payments of $43.63 Free Ground Shipping See All Electric Guitar Packs
Best Answer: first off, there are tuning knobs on the end of the neck of the guitar(the neck is the long piece protruding from the body of the guitar) they control the pitch of the strings. When you tune a guitar you want the first string(or the smallest string) to be tuned to the note e.The other strings going up should be the notes b,g,d,a,e. You only need to tune the guitar whenever it gets out of tune. The knobs on the body of the guitar are volume control for each pickup,master tone control, and master volume.The controls differ from each guitar , but they usually follow something like that.Lastly, on a Les Paul there is a switch on the upper part of the body that controls which pickup is being used.-(the pickup selector). A pickup is a magnet that collects sound from the strings and lets it be amplified through a amp.A good amp costs anywhere from 50 to 100 dollars. Good luck on your guitar.
Official Vintage Guitar Price Guide: This print guide, published by Vintage Guitar and Bass, is an annual guide that is re-published with updated information each year. The webpage above is handy because it shows links for all guides that have been published in one place and will continue adding links for future years. The link shown for each guide will take you to a store online where you can purchase the guide. It is known for being extremely thorough, and its latest edition, the 2017 guide, has appraisals for 2,000 brands of guitars, basses, amps, effects, mandolins, steels, lap steels, ukuleles and banjos.
2. Materials. The timbers used to make these guitars were sourced from every corner of South East Asia. These timbers were “old growth”; in plainer words, the timber was taken from established forests. The advantages of this type of wood are long term stability and strength. Further to this, many of these timbers were species that are now on the endangered list and are therefore illegal to log and/or export. Now, while we consider the cutting down of established “old growth” forest timber a crime, it would be an even bigger crime not to make the most of what is already there. Whilst the build quality of the modern Asian made guitar (i.e. China, Indonesia, Vietnam etc) is exceptional, most of the timbers used are “plantation” timbers or more overly “new growth” timbers. Though this forestation is certainly light years ahead ecologically, it tends to yield timber which is brittle and can be unstable, making many repairs, such as a broken headstock untenable.
This guitar is based on Loar's U. S. Pat. 2,020,557 (filed 1934, awarded 1935), in which electric amplification is combined with an acoustic guitar body. The design offered a player the option of switching between electric and acoustic amplification, or combining both, with metal posts through the bridge that transfers vibrations from the strings to the bar-armature. With the posts raised, the bridge comes in contact with the soundboard for exclusively acoustic amplification; with the posts lowered to contact the metal bar-armature, both acoustic and electric amplification is engaged, and with the posts lowered completely, the bridge is lifted off of the soundboard and supported only by the bar-armature for exclusively electric amplification. The back of the guitar, made from arched spruce, with two f-shaped soundholes, incorporates another of Loar's ideas, covered more extensively in U. S. Pat. 2,046,331 (filed in 1934 but awarded in 1936), to use the back of the instrument as a second soundboard by transferring bridge pressure from the top.
Here just in is a well crafted Japanese made Orville by Gibson J200 this is not a Gibson but is a copy of the Gibby by Orville Japan... So this would have been a sanctioned build and not the Lawsuit setting them apart from other makers like Alvarez and Ibanez and Aria and a few others in fact Orville is Mr. Gibson's first name Orville Gibson so This is NOT a Gibson but a very professionally built version of the J200 its an excellent high quality copy Beautifully crafted workmanship and amazing woods... must see... previous owner love this one so much they also had it professionally customized with its Grovers and logo in MOP... plays absolutely excellent with its low easy to play string action, and notice its old Gibson correct bridge with the ABR-1 type adjustable bridge for precise intonation adjustments over the 60's Gibson correct nylon saddles... nice touch... Its spruce top is really nicely grained and figured with beautiful Patina of the real vintage gibby.
: : I own a Decca guitar, it is what I learned to play on many years ago. From what little I have gathered about them they were an order by mail brand, and you could only get them from a catolog such as Sears & Roebuck. I havent been able to find a price for them or any ifo on what catalogs they were from. Mine has a Ernie Ball Musicman-like peghead (4 one side 2 on the other) and has a metal pick guard with 2 giant switches which seem to have no effect on tone. It has a brown & yellow sunburst paint job (ewwww).I thought I possibly had the only one in existence, lol, guess not.
Gibson Les Paul Standard Electric Guitar This iconic instrument is regarded by many as one of the best electric guitars in the world because of its looks, sound and feel. The 2019 Gibson Les Paul Standard features a figured maple top, mahogany back and neck, rosewood fingerboard with cryogenically treated frets, calibrated BurstBucker Pro humbuckers and an asymmetrical Slim Taper neck shape for total playing comfort.
AMAZING. Awesome place. Will NEVER go anywhere else for guitar work again. I am sitting in the parking lot of this place writing this on my phone, THAT'S how good of an experience I had. I wanted the action lowered on two acoustics and a strap button put on. I called 6 different places around town, each one quoting me prices ranging from $50-$60 for the setup (action adjustment) and another $10 for the strap button. I called Franklin Guitar and Repair and was quoted at $25-$30 for the setup and $5 for the strap button. What a steal! So I took both guitars. He looked at one and said all it needed was minor adjustments, which he did right then and there for free. The other, he kept overnight to adjust and add the button. I picked it up today. $15 TOTAL. What a wonderful person, awesome shop, honest, quality people. And for a steal. Cannot recommend enough!
A very useful way of creating space for guitars in the final mix is to use tunable high-pass and low-pass filters to remove extreme frequencies that do nothing to enhance the guitar tone, but invade the space of other instruments that do perform in those areas. Generally speaking, it’s worth losing everything below 80Hz, although it’s not unusual to set the filter a good degree higher. Shaving off some high end may also be useful to help place the guitar in a specific area of the audio spectrum. Filter at the mixing stage, as the sound of the recording will often determine the optimum filtering points.
The highly resonant basswood body offers a warm tonality which is ideal for the metal fans whilst the high output Schecter Diamond Plus pickups provide everything from crystal cleans to bone crushing riffage when you throw some distortion on your amplifier. Tune-O-Matic bridge with string through body ensures your notes reverberate a lot longer than regular bridges, so those big solos and riffs really stand out. The bolt on maple neck with 24 X-jumbo frets make it an extremely comfortable guitar to play and highly reliable. Ideal for beginners and pros alike.
Gibbons has also twisted more than a few towering tall tales in his time, but his life is so surreal that it’s hard to tell where the truth ends and the trip takes over. His colorful manner of speech, known as “Gibbonics,” has made him one of Guitar World’s favorite interview subjects, especially since his poetic ponderings are loaded with insight, wisdom and a unique sense of humor.
If you decide to choose a guitar, amplifier and accessories separately, consider spending more on the guitar than the amplifier. A better guitar will often suit a player’s needs longer, and a less expensive amp will be fine for early practicing sessions. If the player decides to upgrade down the road, often they may only need to upgrade the amplifier and not their entire setup.
One problem with adding a tweeter to a bass speaker cabinet is that the tweeter may be damaged by the overdriven amplifier tone that is popular in some musical genres, since overdriving the amplifier adds a great deal of high frequency information to the signal. Horns and speakers in the same cabinet are sometimes wired separately, so that they can be driven by separate amplifiers. Biamplified systems and separately-wired cabinets produced by manufacturers such as Gallien-Krueger and Carvin and other manufacturers allow bassists to send an overdriven low-pitched sound to the speaker, and a crisp, undistorted high-pitched sound to the horn, which prevents this problem. Since the 1960s, some bassists have obtained a similar result by plugging their bass into both an electric guitar guitar amp and a bass amp. This approach does not use a crossover, but since an electric guitar amp will only produce pitches down to about 80 Hz, the guitar amp reproduces the mid- to high frequencies and the bass amp reproduces the low frequencies. With this arrangement, distortion and other effects can be applied to the guitar amp without affecting the solidity of the bass amp tone.
When gluing a set neck guitar it’s important that you don’t use an excessive amount of glue. The glue should be applied to the base of the neck and base of the neck cavity. Try to limit the amount of glue so that it doesn’t come into contact with the edges of the neck or pickup cavity as this can impact on the tonal quality of the guitar and sustain.
Wah pedals can sound eerily similar to a human voice, and they were actually a favorite of Jimi Hendrix, who many have said possessed the most expressive guitar playing amongst all the great guitarists. Wah pedals are great to activate right when you’re about to take a solo and when you really want to make it sound like you’re speaking with the guitar.
Typical modern Telecasters (such as the American Standard version) incorporate several details different from the classic form. They typically feature 22 frets (rather than 21) and truss rod adjustment is made at the headstock end, rather than the body end, which had required removal of the neck on the original (the Custom Shop Bajo Sexto Baritone Tele was the only Telecaster featuring a two-octave 24-fret neck). The 3-saddle bridge of the original has been replaced with a 6-saddle version, allowing independent length and height adjustment for each string. The long saddle bridge screws allow a wide range of saddle bridge positions for intonation tuning. The stamped metal bridge plate has been replaced with a plain, flat plate, and the bridge grounding cover (which, while helping with the shielding, impedes players who like to mute strings at the bridge with the side of the palm, and makes it impossible to pick near the saddles to produce the characteristic Telecaster ‘twang’) has been discontinued for most models. Also different from the original is the wiring: The 3-way toggle switch selects neck pickup only in the first position, neck and bridge pickups together in the second position, and bridge pickup only in the third position. The first knob adjusts the master volume; the second is a master tone control affecting all the pickups.
This guitar has a maple neck which is coated with a thin satin finish and has a C-design which is easy for beginners to handle. It features an alder solid body. The vibrato design is enhanced with the addition of block saddles for adding firmness to the tone. They also give a precise breakpoint for the strings. Speaking of pickups, the PAC 112v is equipped with a 5-way blade pickup selector. There are master tone and volume controls for the neatest output. This guitar is available in seven finishes, natural satin, old violin sunburst, raspberry red, sonic blue, black, and silver metal.
James Marshall "Jimi" Hendrix was an American guitarist, singer, and songwriter. Although his mainstream career spanned only four years, he is widely regarded as one of the most influential electric guitarists in the history of popular music, and one of the most celebrated musicians of the 20th century. The Rock and Roll Hall of Fame describes him as "arguably the greatest instrumentalist in the history of rock music". Born in Seattle, Washington, Hendrix began playing guitar at the age of 15. In 1961, he enlisted in the US Army; he was granted an honorable discharge the following year. Soon afterward, he moved to Clarksville, Tennessee, and began playing gigs on the chitlin' circuit, ...more on Wikipedia
A favored brand of a number of against-the-grain musicians – like Jack White of The White Stripes, Dan Auerbach of The Black Keys, and the late great David Bowie – Eastwood is unique in that, alongside their catalog of more traditional guitars, they’ve also taken it upon themselves to bring back a number of more obscure models through the revived Airline brand. For instance, the ’59 Custom 2P pictured above was originally offered by VALCO in a catalog sale through Montgomery Ward from 1958 to 1968. Their vintage style instruments are updated with modern manufacturing techniques, giving players the opportunity to pick up rare offerings at a reasonable cost. But perhaps the coolest thing about this company is their custom shop. Set up almost like a Kickstarter, the shop allows customers to bid on defunct, new, and bizarre guitars and go on to build whichever models meet their funding requirements.
Once again we traverse the extremities of guitar body sizes; from the sleek parlour shapes to the rather obviously named jumbo sized acoustics. If dreadnoughts are the poster-boys, and parlours the waif-like supermodels, then jumbo acoustics are the plus-size, brash, loud ones who just want to have fun. You’ll probably have seen jumbo-sized acoustics in the hands of Noel Gallagher or Bob Dylan, and the benefits here are measured in sheer volume. With all that extra wood, there’s more room for the sound to reverberate around the body, resulting in a big, bold sound which simply can’t be recreated from a smaller bodied guitar.
The first “production” electrics were made by Stromberg-Voisinet in Chicago in 1928 under the direction of Henry Kay “Hank” Kuhrmeyer, soon to be president of the company which would shortly be renamed the Kay Musical Instrument Company. S-V developed the first commercially viable (more or less) pickup and amplifier. The pickup – we’ve yet to see one so an accurate description is impossible at this point in time – was probably a quasi-transducer which probably adapted phono cartridge or telephone receiver technology. It was placed on S-V’s two-pointed Venetian-shaped acoustic guitars and was greeted with great ballyhoo in the music trade press. The amp was produced before the development of preamp tubes, and was undoubtedly very primitive (there is no mention of even volume controls), and probably not particularly loud (though, of course, listeners had nothing to compare). Apparently, the reality didn’t live up to the hype, because Kuhrmeyer later suggested than only a few hundred of these guitars were actually made, and mention of them evaporates after 1928, likely done in by a combination of lack of performance and the upcoming Great Depression, which descended in 1929.
A 6 stringed right handed electric guitar that mostly comes in black color. It has its body made of bass wood and fret board made of rosewood with 22 frets. The dimension of the guitar is 9 x 9 x 3 cm that is easy to handle. The model is quite affordable with prices ranging from around INR 9,071. Its beauty makes it have the required curb appeal for stage performances and give motivation in studio. More information can be found on the link that follows.
Vintage styling, high quality speakers and that classic Fender cabinet warmth - there's a lot to love about the Fender Bassbreaker 212 Guitar Cab. Perfectly matched with the Fender Bassbreaker 15 & Fender Bassbreaker 45 guitar amp heads. There's 2 x 12 inch, 8 Ohm Celestion V-Type speakers inside and the semi-closed back ensure those rich, low end frequencies are captured. A great addition that can act as an extension cabinet to the Fender Bassbreaker 45 combo/head and the Bassbreaker 18/30 combo. if you want to add that signature fender warmth to your sound, this head is a perfect match to your own amplifier head with a total impedance of 16 Ohms.
Amazing guitar for the price point. It's build is so accurate it requires no setup, just tune and it's ready to go. Great rich sound, very bright, great action up and down the neck. I can't put it down and I'm enjoying it more than my six string acoustics. There's something very forgiving about playing a 12 string vs a 6 string, the neck is slightly wider and there's more room for the fingers, and the pressure points on the fingers are wider too which lends to smoother playing.
Thanks. It sounds good without tone shaping ability but I wanted to hear the original sounds. It now has 2 capacitors tied together from the volume pot to 1 tone leg. I am guessing the original tone switch was wired with one cap. for the low & one cap. for middle and the 3rd tone leg was straight wired for treble high. I also wonder how the ground sweep worked on the tone selector?? I just need to know. I’m a DIY guy.
Nice-Keys-CompletePlus-JNv2.0 A large set with three different piano types plus all the nice instruments. All in a package of 943mb. Pianos have different brightness and resonance settings available and all the nice instruments from EPs, Pads, Organs, Strings, Orchestra and Synths are included. A printable link to the list of available instruments is here Nice-Keys-CompletePlus-Instrument List
You have 16 different modulation effects including chorus and flange, 12 overdrive/distortion effects including high gain monsters and smooth creamy overdrives, 14 mono and stereo delays and reverbs and 22 amp models including tube and solid state amps from Fender, Marshall, Orange, Diezel, and mesa Boogie. It’s safe to say, you’ll find it hard to get bored of this thing!
Ovation’s Lyracord backs weren’t the company’s only fling with synthetic materials. In the early ’70s Charles Kaman set his engineers, many of whom were not guitar players, to work on developing a new synthetic guitar, yielding the deep-bowl, acoustic-electric Adamas which went into production in 1976. The Adamas top, called a Fibronic Soundboard, was made of a laminate of carbon-graphite and birch about a third the thickness of a conventional spruce top. Instead of a regular round central soundhole, Kaman engineers positioned 22 smaller holes on the upper shoulders surrounded by epaulets of multicolored woods in a kind of leaf design. The bridges and headstock featured elaborate scroll carving. The neck was reinforced with a patented Kaman bar, a u-shaped cast aluminum insert designed to keep the neck stable even with dramatic changes in temperature and climate. The necks and fingerboards were made of walnut. The fingerboards had hollow triangular maple inlays, tapered beginning at the 18th fret on the bass side to the 24th fret on the treble. Hardware was gold. Until the advent of Ovation’s Collector Series in 1982, the Adamas was Ovation’s flagship, favored by the likes of Larry Coryell and others.