As the first blues guitarist to pick up an electric guitar and play single-string solos in the late Thirties, T-Bone Walker didn’t just lay down the foundation for electric blues and rock and roll—he also built the first three or four floors. John Lee Hooker credits T-Bone Walker with making the electric guitar popular, claiming that everybody tried to copy T-Bone’s sound.
20 pages, black and white with color front cover. In the middle of 1981, Rosetti took over distribution of the Gibson line in the UK. Rosetti were a very big name in Britain, having distributed Epiphone since at least 1963, as well as Hagstrom and others. This catalogue was produced at the tail end of 1981, and introduces a number of models to the UK, such as the MV-II, MV-X guitars and the Victory basses, the GGC-700 and the Flying V bass. Some of these models were so short-lived that they were actually never included in US brochures. The cover image (reproduced in part here) showed some of the earliest demonstration models, including a Victory with a highly unusual white scratchplate.

For under £400 you get a set of Paul Gagon-Designed Alnico Pickups which provide a massive sound ranging from smooth and cool surf rock to all out grunge distortion. The AW4470B humbucker in the bridge position is complemented by an AP4285B P-90 neck pickup which ensures you have an array of tones at your fingertips – ideal for clean and distorted amplifiers. The addition of a push/pull coil tap allows you to split the humbucker so you can enjoy the classic sounds of a single coil. A mahogany body and maple neck provide the resonance, depth and snap you need for a wide range of tones and the G&L Saddle Lock Bridge with its six individual saddles offer incredible intonation as the saddles actually lock onto the strings.
© 2013 Ubisoft Entertainment. All Rights Reserved. Rocksmith logo, Ubi.com, Ubisoft, and the Ubisoft logo are trademarks of Ubisoft Entertainment in the US and/or other countries. The “PS” Family logo and “PS3” are registered trademarks and the PlayStation Network logo is a trademark of Sony Computer Entertainment Inc. Software platform logo (TM and ©) EMA 2006.
The ’38 Supro line contained two lap steel models, still made of wood, but substantially different from the model seen in the ’38 Sorkin/’39 Grossman catalogs. The Supro Avalon Hawaiian Guitar had a rectangular body with rounded corners and two concave “cutaway” shoulders. The head had a slight curve to it. The fingerboard was made of polished aluminum, and the guitar was finished in gloss black. An enameled handrest covered the single pickup and strings passed into a slotted rectangular metal tailpiece. On either side of the fingerboard, just above the handrest, were two square plates embossed with the Supro logo and containing one control knob each, for volume and tone. Without case this cost $40. Note that this was the first appearance of tone controls on Supro brand guitars.
The brands and individual guitars that we have selected are based on a combination of our joint 80+ years of experience and the ratings and feedback from people who have bought them. The leading brands are dominated by Martin and Gibson/Epiphone as you might expect, and there's not a lot of change this year in terms of brands expect that Seagull has earned their way back into this list at the expense of Fender - we had to make the cut somewhere.

Description: Body: Alder - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Custom - # of Strings: 6 - Headstock: 3+3 - Bridge: Fulcrum Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Duncan Designed - Pickup Configuration: S-S-S - String Instrument Finish: Transparent Colors
Whether you are a beginner or the pro guitarist, choosing the right guitar brand is always essential. We are sure you will find your desired electric guitar from the range of best electric guitar brands we review above. If you want something different or best acoustic guitar brands, do share with us your thoughts in the comments below. Maybe we missed out something that you would remind us.

Fender are perhaps the world’s most famous electric guitar brand. Founded by Leo Fender in California in 1946, they are famed for producing the first ever mass-produced solid-body electric guitar. Since then, Fenders have been used by some of the biggest names in music, from Jimi Hendrix and Buddy Holly, to Paul McCartney and Eric Clapton. These days the company’s headquarters are in Scottsdale, Arizona, and they still produce two of the most iconic models of all time – the Stratocaster and the Telecaster.


Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue
FYI, Dave might be backed up due to demand if he is still working, so I'd call those places up and ask them in advance. Twin Town isn't too bad a drive if you've got a car, maybe 15 minutes from Bloomington, but the place up in Fridley is about a 20-25 minute drive. They might be the best at working on short notice though as they're a smaller place. Definitely give them all calls.
Featuring a sound engine derived from the bigger, premium-priced GT-100, the GT-1 contains 99 preset and 99 user patches each built from a chain of blocks that can draw from 108 effects, including 27 amp/speaker sims and a 32-second looper. The first two footswitches scroll through patches, while the third (CTL1) footswitch is used to turn an effect, or a combination of effects, on and off in a patch, or for tap tempo. Sonically, there's some great stuff here. Many of the presets are playable straight off the bat, but the wide range of effects means that you can get really creative with your own patches. As you'd expect from Boss, the modulation effects are a highlight, as well as the delays and reverbs, particularly the Tera Echo. We've heard better pitch-shifting though... While the COSM amp sims will give you an approximation of the real thing for recording, at this price, you don't get the playability and detail of high-end modelers. Likewise, the overdrives and distortions work really well when building a patch but, used as solo effects, have less of the impact of real analogue pedals. The acoustic guitar simulator is class, though. For live use, the GT-1 doesn't have the flexibility of bigger units where you can switch individual effects, although you could get 
by in a live situation with careful sequential use of your own patches and the CTL1 button.

The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.
Larry Robinson Fine Custom Inlays - They produce one-of a kind shell inlays for all kinds of guitars. One of a handful of inlay practicioners in the country, Larry has done exquisite work for major guitar manufacturers (Fender, gi bson, Yamaha,...), small production shops (Santa Cruz, Collings, etc.), single luthier shops (Klein, Ryan, Olson, Megas, and more), collectors like Tsumura and people who just want something to personalize their guitar.

The Orange Rocker 32 2x10" Valve Combo Amp is a great amp for those who want a serious amount of power on stage. This all valve stereo amplifier allows you to channel into that signature Orange crunch and utilise the stereo effects loop to really make use of any stereo pedals you may have (Strymon Timeline etc.)  Enjoy massive panning delays, previously only possible by using two amps at once and knock the power down using the "Half Power Mode” for home playing.

Want to switch from pristine cleans, to vintage crunch, to face-melting distortion within seconds? You’ll probably want a modeling amplifier. Based on digital sound processing, modeling amps will combine many (sometimes hundreds) of iconic, vintage and modern amp sounds into a single unit, easily selectable at the twist of a dial or press of a button. Of course, the downside to modeling amps can be their recognizable digital tone, but when this means you have a whole guitar store worth of amps at your disposal it doesn’t tend to put many guitarists off.
Third, the amp should be easy to use: If the controls are hard to figure out, they’ll likely frustrate those who’d rather spend their time playing than trying to figure out how their amp works. Also, every guitarist will at some point have to use someone else’s amp, so starting with an amp that has a fairly common control set will help you learn to dial in your sound when using an unfamiliar amp.
The Martin F Series bit the dust in mid-’65, to be supplanted by the somewhat updated, nattier GT Series of bound archtop hollowbody electrics. The first few prototypes were dubbed the XTE Series and produced in 1965. The guitars were renamed the GT Series and swung into production in the beginning of 1966. The GT Series consisted basically of two models, the GT-70 and GT-75. These were thinlines with two f-holes, a 15th fret neck joint (actually more frets were clear of the body), bound 22-fret rosewood fingerboards, dot inlays, and new, bound, wide-flared three-and-three headstocks with a concave curve in the pointed crown.
In high school wood shop class, while other kids were building bookshelves that tilted, coffee tables that bowed, and paddles to smack each other with, Crisler was building a guitar. He later attended the Roberto-Venn school of Luthiery in Arizona and became a guitar researcher at Schecter Guitar Research and continued to enhance his knowledge of the guitar. Later, working for places like Guitar Center and Mars Music, which has since closed its doors, Crisler learned the ins and outs of the guitar, how to quick fix problems, and create solutions for unfixable problems. In the '80s, when Van Halen was touring in support of their album 1984, he had the opportunity to go back stage and repair Eddie Van Halen's guitar. "I thought I was so cool," he says. But he'd finally obtain the right to call himself a "guitar master."
{ "thumbImageID": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "defaultDisplayName": "Epiphone Les Paul Special I P90 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51314371183322", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry-1314371183322.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Black", "sku": "sku:site51314371183302", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black-1314371183302.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51314371183312", "price": "149.00", "regularPrice": "149.00", "msrpPrice": "209.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow-1314371183312.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000-00-60x60.jpg", "imgAlt": "" } ] }
This great book of interviews is, in my opinion, one of only a handful of truly essential record-production books, and is packed with down-to-earth recording advice, as well as discussions of the art of production. In addition to the interviews I've referred to in this article, the book also features such greats as Glen Ballard, Arif Mardin, Brian Wilson, Phil Ramone, Mitchell Froom, George Martin and Geoff Emerick, and one of the strengths of Massey's approach is that he often asks them similar questions, which makes for interesting comparisons.
You have 16 different modulation effects including chorus and flange, 12 overdrive/distortion effects including high gain monsters and smooth creamy overdrives, 14 mono and stereo delays and reverbs and 22 amp models including tube and solid state amps from Fender, Marshall, Orange, Diezel, and mesa Boogie. It’s safe to say, you’ll find it hard to get bored of this thing!

{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"headphone guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers: headphone guitar amplifiers","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}

Get ready to rock with the First Act Electric Guitar with Amp. It's scaled down for smaller players, yet it's designed with the same materials, electronics and appointments as First Act's full-size guitars for full rock sound. One high-output humbucking pickup delivers big rock distortion and classic clean tones. The maple neck and rosewood fingerboard offer a solid feel and warm tone. Classic hard tail bridge pumps up the sustain. Independent volume control means the ultimate in sound tweaks.
Let's discard the keyboard idea. And the human hand idea. Let's isolate the guitar player from the instrument. The player can manipulate only three parameters - the tone, velocity and duration of sounds to be generated. We have that in MIDI. (Okay, the guitar player can dance and wear a costume, but for our purposes, that's not part of the equation.) 

Low frets aren't a bad idea, and Carvin is a very good brand for guitar, amp, etc. To me, it seems that the neck shape is going to be very important for you. Double-check what Carvin's return policy is, and if you think it will work for you (whatever it is) then I would totally say go for it! The caveat is that I would bring it to your local music store for them to do the setup, setups and intonations usually need to be done after shipping, and you'd need to have it done if you were changing string gauges anyways, so....
The CX-12 is a 12-hole, 48-reed chromatic, uniquely designed with a one-piece plastic housing and a more ergonomic slide button. It is available in several keys including a tenor-C. The standard model is charcoal black in color, but a gold colored one is available in the key of C only.[42] A variant of the CX-12, the CX-12 Jazz, has slightly different outer body features for better ergonomics, a red and gold colored housing, and higher reed offsets which aid in better tone for jazz harmonica players.[43]
People that "hear a difference" are usually pre-conditioned to hear one. If you were removed from the guitars presence completely and only given anonymous samples of their tone, it's highly doubtful you'd identify, match or even come close to choosing 100% of the guitars tones correctly. Especially based on some imagined effect the wood is having on the sound.
They may not always be the first thing you reach for, but the MIDI effects plug-ins that come with most DAW applications like Logic and Cubase often offer something very different from most audio plug-ins. For example, arpeggiators and step sequencers can be great for use in the composition process, and you can use MIDI note to controller data (CC) plug-ins to generate automation data for the parameters of other plug-ins. As they process only MIDI data, and not audio, MIDI plug-ins put very little strain on your computer. Matt Houghton

Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
The GrandMeister Deluxe refines the German firm's best-selling compact head, with four flexible channels and a host of built-in effects. Just about everything is MIDI-powered, so you can edit and store presets to your heart's content. The rear panel includes the latest Red Box recording output, and there's also a new improved iPad app that you can use to edit and store presets, either at the end of a lead or using a wireless MIDI adaptor. The GrandMeister Deluxe 40's four channels sound quite different from those of its predecessor: they're more balanced, with slightly less treble emphasis and a smoother but no less powerful bass response. There's plenty of headroom on the clean channel, which dovetails seamlessly with the higher-gain crunch channel. Both clean and crunch are very tweed-influenced, dominated by a warm midrange that's equally flattering to humbuckers and single coils, especially when boosted and laced with a little of the GrandMeister's digital reverb, which can be combined to taste with delay, chorus, flanger, phaser or tremolo. The two American-voiced lead channels have all the gain you could possibly need for almost any musical genre, from classic rock to modern drop-tuned metal, with a nicely sculpted top-end that squeals and snarls on demand. As a do-it-all tool the GrandMeister 40 takes some beating. All of its many features work efficiently and it's hard to point the finger at shortcomings, because there really aren't any.
Fishman is the main brand that you’ll see manufacturing the electrics, but lots of the bigger guitar brands will also have their own in house products. Higher end guitars are more likely to have specialist or boutique equipment which is generally considered to be better. Gibson using LR Baggs pickups systems is one such example. You can also opt for aftermarket pickups.
NOTE: In these diagrams, the volume and tone controls are viewed from the rear. The volume and tone controls are variable resistors, also known as potentiometers (or "pots" for short). In electric guitars, the values for either of these usually is about 250K to 1 megohm. The capacitor in the circuit is for the tone control and these values usually are from .02 to .047 mfd (short for microfarad).
For an overdrive pedal, turn your attention to the Fulltone OCD Obsessive Compulsive Drive Overdrive Guitar Effects Pedal. Compact yet versatile, this pedal is great for anyone who likes a raw vintage-like overdrive, and it even makes a great boost pedal. Now, if it's a distortion pedal that you're after, take a closer look at the Electro-Harmonix Classics USA Big Muff Pi Distortion/Sustainer Guitar Effects Pedal. The Big Muff Pi is a legendary pedal in itself, and this reissue has 3 controls that let you dial in the finest harmonic distortion/sustain ever produced. From warm bass to crisp treble, you'll be blown away by what this distortion pedal can do for your hard-rocking guitar performance.
Some large combo amps and large speaker cabinets have ball-bearing-mounted caster wheels to make it easier to move them. All combo amplifiers and speaker cabinets have some types of carry handles, either a folding handle on the top or recessed handles on the sides. There are two types of recessed handles: some equipment has folding, spring-loaded metal handles, with the spring holding the handle flush against the chassis until it is pulled out for use; the second type is handles that are non-moving, and which are flush with the surface of the amp/cab, but with a hollow area behind the handle for the hand to go. In both cases, the handle does not project out beyond the amp/cab, preventing the handle from catching on items during transportation and/or being damaged.
"We strive to offer our clients the highest level of service in guitar sales, repair and consulting. We will, as keys to attaining this objective, conduct our business according to a high standard of excellence. We are dedicated to earning our clients' trust through our professional conduct, our many years of experience, and our extensive preparation for their needs."
You should visit a local guitar shop to purchase your first guitar. You will benefit immensely from their experience, and they will be able to support you after the sale. Avoid places like Walmart, Best Buy, etc., because all they can do is sell you a guitar, and a poor one at that. Most local guitar shops have gone to great lengths to select guitar lines that are serviceable, and play and sound good. As a beginner, you will appreciate their service and commitment to you, even though a local shops pricing may be a touch higher. Most local shops offer lessons, as well.
Peavy amps are especially well appreciated by the metal community, thanks to their good overall reliability and the high volume of sound some models produce. The 6505 Series is a favorite of metal guitarists due to its power and versatility. This is most often used as a head for double stacks of speakers, but it can also be purchased as a 2×12” and 1×12” combo for convenience.

Augustino Lo Prinzi Guitars - Augustine Lo Prinzi has made more than 10,000 guitars and just started his 49th year as a guitar maker! Renowned throughout the instrument making field, Augustino LoPrinzi's first instruments were classic guitars. As his career progressed he constructed many types of string instruments, numbering in the thousands : mandolins, lutes, violins, and steel string guitars, to list but a few. Now he is applying these years of wisdom to his first love, the classic guitar, which began his journey into instrument making. 

Standard versions and collectable versions of the 4003 have included the 4003s (special)(discontinued 1995) a 4003 similar to the 4001s with dot neck markers, no body binding based loosely upon the original Rickenbacker basses and fitted with 4001 pick ups. 1985-2002 versions of 4003 and 4003s were available with black hardware option and black binding. Other later special editions have included 4003 Blue Boy, 4003 CS (Chris Squire) similar to 4001 CS Limited edition specials include the Blackstar, the Shadow Bass, the Tuxedo and 4003 Redneck.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.

Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
There are continuous debates on various topics that I am often asked to contribute to with my opinion. I usually decline, because it’s rarely important what my opinion is when it comes to the instruments I produce – it has to be the musician’s opinion that counts. So let’s start by the question “Which tonewood is the best” and just answer it with “The tonewood that gives the musician the sound and feeling he or she is after” and then we can leave it at that.
What started out as Gibson’s daughter company that was tasked with producing affordable guitars, has grown into a giant. Not so long ago, Epiphone was the brand you turned to if you wanted a legit Les Paul but didn’t have the money for Gibson one.Today, things are vastly different. Gibson stepped up their game across the board, producing some of the absolute best guitar on the market.

I just built this kit, which I ordered directly from Mod DIY. Its the first pedal kit that I have built, although I do have a fair amount of electronics experience. Overall, I was impressed with the kit. All the parts were included, and functioned just fine. The instructions were outstanding, particularly if you use the high-res picture of the inside of a finished model for reference. There was ONE step omitted in the direction, which was to solder a short wire between terminal 3 of the toggle switch to connection 12 on the junction rail. But that was easy to spot.
This is an amazing acoustic guitar for the new generation of guitarists that is quite presentable, especially in stage performances. It comes with a black border and has a free gig cover. The fret board is made from rosewood, which makes it quite easy to handle. It has incredible rigidity, with truss rods on both sides. It produces a considerably high quality of sound and is cost effective with prices ranging from about INR 4,999. This may sometimes be accompanied by free packing and shipping. Find more information on the site link below:
While hollow guitars are best suited to jazz, there have been a handful of cases where rock musicians have utilized fully hollow jazz box guitars in rock and roll. Chief among these would be Ted Nugent, who actually used the excess feedback produced by his Gibson Byrdland as a musical tool. Hollow ES-335 style guitars are used in blues and rock more frequently than the jazz box (the Beatles used the Epiphone Casino extensively), though because of the feedback they produce most musicians stick with semi-hollow instruments.
Guitarists don’t have to just look on in envy as pianists lead the holiday sing-a-longs this Christmas. Our selection of holiday Guitar Tabs include traditional classics we all love like “O Holy Night” and “Carol of the Bells” and the pop favorites that just wouldn’t be the same without a guitar, like “Jingle Bell Rock” and “Happy Xmas (War is Over)” by John Lennon. But if you just can’t get enough of those traditional Christmas classics, you can pick up our collection of ’Christmas Favorites for Guitar.’
If you want to test the waters, here are the some of the best free guitar effects software packages. Aside from the limited freeware software, there are Lite or Trial versions of commercial programs which you can get for free, but with limited in features. The good thing though is that even when they lack features, they work and sound just as nice.
Some more advanced models, like the Wampler Latitude Tremolo Deluxe, bring a much more complex set of features, which include choosing the waveform and more. Whether you are looking for a good way to spice up your tone without impacting the nature of your signal, or you are just in need of a great vintage style effect, tremolo is the one to go for.
Most Fender guitars are equipped with single-coil pickups. They have a lower output level than dual-coil pickups but sound brighter and sharper, which is perfect for clean and crunch sound. Both the Telecaster and the Stratocaster generally have an ash or alder body, a maple bolt-on neck and a rosewood or maple fretboard. Some other Fender models were also moderately successful (the Jazzmaster, the Jaguar or the Mustang). Squier, a brand that originally manufactured strings, was bought by Fender to become a sub-brand and sell guitars manufactured in Japan from 1982 onwards.
American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.
: Just in a vintage excellent beauty with a fresh JVGuitars set up is ,New Martin strings bone nut & saddle and solid ebony with brass ring and Abalone inlay bridge pins, all old plastic cheap tone robing parts are tossed out for the JVGuitars TONAL UPGRADE to 2017 specifications otherwise she's ALL ORIGINAL see for yourself She's pretty darn clean and in better than 40 years old average vintage condition For a song. The Takamine F360 was DISCONTINUED decades ago This is the Lawsuit version Specifications Top Sitka Spruce Back Rosewood Sides Rosewood Finger Board Rosewood Electronics None Finish Natural Gloss Faithful D-28 style Dreadnought The most popular body shape of the past half century, the Dreadnought delivers a strong low end with plenty of volume. Structural integrity is excellent as is neck applignment its action is very good low and it plays with ease, new strings and sounds great this fine vintage Japanese instrument is ready for another 40 years of enjoyment. She is not new its actually 40+ years old and has been played, frets are still excellent and have been JVG dressed and she has a few minor and insignificant doinks or scratches and nothing to detour from its vintage patina beauty she's a true vintage quality instrument and is faithfully based on the great D-28 a playable work of art you can hear and enjoy for decades to come. Well taken care of California one adult owner that took really good care over 40 years just for you! Get her before she's gone. any questions or to purchase now contact Joe at JVGuitars@gmail.com .
The first Merson guitar advertised in The Music Trades appeared in the December, 1948, issue. This was the Tempo Electric Spanish Guitar which listed at $59.50 plus $11.50 for a Dura-bilt case. The Merson Tempo was an auditorium-sized archtop with a glued-in neck, a harrow center-peaked head which looks almost Kay. The guitar was finished in a shaded mahogany with a pair of widely separated white lines around the edges. Available source material is hard to see, but these appear not to have any soundholes. The fingerboard was probably rosewood with four dots (beginning at the fifth fret). This had a typical moveable/adjustable compensated bridge, elevated pickguard and cheap trapeze tailpiece. One Super-Sensitive pickup sat nestled under the fingerboard, and volume and tone controls were “built-in.”
I must confess -- I am horrible at soldering. So after messing up another wiring harness with my soldering skills, I came across ObsidianWire and purchased out of desperation. Now I wish this would have been my first choice. The wiring sounds awesome, it was a breeze to install and the included switch and input jack completed the upgrade. I would HIGHLY recommend ObsidianWire harnesses." - Ross G Vintage 50s Wiring for Les Paul
Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.
If you want to explore the two-channel tubes amps, start with Vox. The British brand is known for making workhorse amps that were used by classic rock’s best, and this small 15 watt option will give you all the tone is a small package that you can crank up in small spaces. Along with a simple set of controls, it features a by-passable effects loop for those players who are experimenting with different gear.
I have a Les Paul Gold Top copy I bought new in the mid 70's. It has no brand name anywhere on it. I have done all the research I can and have found no conclusive results.I'm at a loss. It plays great! I do have pics. if that will help. Thanks for any help' It was bought in Montgomery Al. Clarence Carter's guitar player bought one while I was in the store so I figured ...must be a okay guitar. So I bought it. On the little square plate on the back it is hand engraved #0059. Thanks
As we’ve shown here, a lot of relatively small—and inexpensive (many are practically free)—tweaks can hot-rod your tone and maneuver it to an array of differing ports of call. In some ways, it’s like tossing a handful of dice instead of just two—because the way small tweaks interact can lead to exponential changes in sound. For that reason, my advice is to take it slow and only make a single change at a time to understand what it delivers. Besides, it’s more fun (and less stressful) that way, anyway!
In terms of the electronics, we are once more faced with a System 66 unit. You get a three-band EQ, a built-in tuner, and a versatile mid-range slider that allows you to really tune those mids to perfection. Overall, if you appreciate a comfortable guitar that sounds good and will take on any stage performance you can dish out, this Yamaha is something to look into.
Description: Body: Maple - Body Construction: Solid - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Natural
1. (n.) A sweet or agreeable succession of sounds.2. (n.) A rhythmical succession of single tones, ranging for the most part within a given key, and so related together as to form a musical whole, having the unity of what is technically called a musical thought, at once pleasing to the ear and characteristic in expression.3. (n.) The air or tune of a musical piece.
It has always amused me that one of the great tempests in the teapot of guitardom has been the legendary “lawsuit” of the 1970s. You know, when Norlin (aka Gibson) sued Elger (aka Hoshino, aka Ibanez) in 1977 over trademark infringement based upon “copying” Gibson’s headstock design. There are tons of ironies in this story, but one of the most amusing aspects is that companies such as Gibson have been one of the most egregious copyists of its own guitars over the years. Witness the Korean-made Epiphone Firebird 500 seen here.

Buying a new guitar amp is easy. But, as you will have seen, ending up with the right amplifier for you isn’t as straightforward. Amps are not something you buy every day, so take your time, read our guide, use our categories and charts as inspiration, and ultimately you will find something that will suit you and your playing perfectly. Good luck in your hunt for the perfect amp!
{"pageName":"[gc] pdp: samick artist series electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop6":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop3":"[gc] shop: guitars: electric guitars: left handed electric guitars","prop4":"[gc] shop: guitars: electric guitars: left handed electric guitars","products":";114368474;;;;evar65=Used-Guitars-Samick","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
“Spectrum ‘5’ has an unusually thin neck. To achieve the proper rigidity in this fast action neck Teisco had to select the hardest (and the costliest) material available…Ebony. The adjustable neck is fashioned out of 5 plys [sic] of laminated Ebony to insure maximum strength. The fingerboard of the Spectrum ‘5’ is likewise fashioned out of Ebony. Note the unique position markers and the extra wide, easy to finger frets.
Interestingly, the 2019 version of this guitar doesn't stray too far from the more expensive Standard model in terms of looks - some even prefer it over more expensive models because of its streamlined appearance. While there are no high grade tonewoods involved, the Les Paul Tribute still uses the same mahogany body and maple top combination. The 24.75" scale length neck also follows after the Standard model, complete with a 22-fret rosewood fretboard and a 1.695" nut width. As the name suggests, this model features a slim taper neck profile that modern players will appreciate. Finally, it is equipped with a 490R humbucker for the neck and a 490T humbucker for the bridge, which reproduces the sound of old Les Pauls from the '60s.

Launch price: $4,149 / £2,999 | Body: 3-piece maple/poplar/maple with figured maple top | Neck: Mahogany | Scale: 24.75" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x MHS Alnico II humbuckers | Controls: 2x volume, 2x tone, 3-way selector switch | Hardware: ABR-1 bridge with titanium inserts and stopbar tailpiece | Left-handed: Yes | Finish: Sunburst
The body of the instrument is a major determinant of the overall sound variety for acoustic guitars. The guitar top, or soundboard, is a finely crafted and engineered element often made of spruce, red cedar, redwood or mahogany. This thin (often 2 or 3 mm thick) piece of wood, strengthened by different types of internal bracing, is considered the most prominent factor in determining the sound quality of a guitar. The majority of the sound is caused by vibration of the guitar top as the energy of the vibrating strings is transferred to it. Different patterns of wood bracing have been used through the years by luthiers (Torres, Hauser, Ramírez, Fleta, and C.F. Martin being among the most influential designers of their times); to not only strengthen the top against collapsing under the tremendous stress exerted by the tensioned strings, but also to affect the resonation of the top. Some contemporary guitar makers have introduced new construction concepts such as "double-top" consisting of two extra-thin wooden plates separated by Nomex, or carbon-fiber reinforced lattice - pattern bracing. The back and sides are made out of a variety of woods such as mahogany, Indian rosewood and highly regarded Brazilian rosewood (Dalbergia nigra). Each one is chosen for its aesthetic effect and structural strength, and such choice can also play a significant role in determining the instrument's timbre. These are also strengthened with internal bracing, and decorated with inlays and purfling.
The Gibson Mandolin-Guitar Mfg. Co., Ltd. was founded by Orville Gibson in 1902 in Kalamazoo, Michigan when he brought in a consortium of investors to finance expansion to keep up with demand. Orville had been selling his hand made instruments since 1894 and was awarded a patent for his one-piece designed mandolin in 1898. He also invented Archtop Guitars around that same time by applying similar lutherie techniques to those used on violins.
Most of the better machine heads on the market these days use a standard .375" headstock hole, so swapping tuners isn’t that hard to do. The problem comes with the mounting at the rear of the peghead. Luckily, if you use the type that screw down from the front side with a nut and washer, you can swap and test before you drill additional mounting-screw holes.
Most newbie guitarists want a small amp that sounds good but doesn’t cost too much. The amps listed above are that and more. However, there are some guitar players who mean business from the beginning, and won’t want to waste time on small beginner amps when they have the resources and ambition to grab an intermediate or pro-level amp. If you know you are going to stick with playing guitar, and if you can justify it in your budget, that’s not a bad idea.
Combo or Head + Cab? Again, this is a personal choice. It's easier to have a combo, but a head + cab combination might be easier (& lighter) to carry, as you can carry both parts separately. Of course, if you're in a metal band, you simply MUST use a really loud head amp (no matter how small the venue is) and a 4x 12" speaker cabinet. That's just how it is...it's in the rock bible, somewhere! We've put together a complete guitar amp buyer's guide to help you figure out what you need.
Its not exactly the same as an amplifier, but you can come close, or you can use the effects, looping capabilities and other features of the app to create new sounds that aren’t at all like what you would get from an amplifier. Many pro audio manufacturers sell foot pedals that feature amp modeling too - Boss, Digitech, TC Electronics, Roland just to name a few.
48-HOUR RISK FREE TRIAL PERIOD (Includes guitars, effect pedals; excludes speaker cabinets and amps). Returns for 100% refund will be issued if the customer expresses their desire to return the item by email, phone or Reverb Message, within 48-hours of receiving the product. If done so, Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail at our expense. We require that the item be return shipped within 24 hours of contacting Moore Guitars of your desire to return the item. If the item is not shipped within the 24 hour time period the you will be moved to the next tier of our return policy. This is our "try it out in your own jam room" return policy. Just FYI, this is not a "Gig it, and Return It" Opportunity. Items purchased during Official Sales Events are not eligible. See "After 48-Hours" for returns on these items. AFTER 48-HOURS Returns after 48 hours and up to 14 days may be authorized and a full refund will be issued for any item, for the purchase price. Moore Guitars will issue a FedEx prepaid and insured shipping label via E-mail. If your purchase originally qualified for free shipping, the actual shipping charges will be deducted from your refund, as will any/all return shipping charges. Returns occurring between 15 and 30 days will be exchanged for 100% toward a trade of equal or lesser value of in-store product, OR 85% of the purchase price less shipping to and from the customer. All returns for any reason and at any time must be cleared through a Moore Guitars Representative. No exceptions. Any damage due to shipping must be reported immediately upon receiving the item. If an item is damaged due to shipping, we will refund the purchase price and the shipping costs to ship the item back to Moore Guitars. All returned items must be complete, unregistered and in the original condition and packaging with all accessories and complete documentation (Owner's Manual, Warranty Card, quick start guides etc.) No returns on Special Orders, Pre-orders, Trades, Close-outs, or Blow-out items. Return requests on all non-domestic United States shipped items must be submitted via email or phone within 24 hours. A full refund will be issued less shipping costs to and from the buyer on any item once we have received it and inspected it. No refunds will be issued for non-domestic United States shipped items after the 24 hour window has closed. ALL RETURNS ARE SUBJECT TO AN INSPECTION BY A MOORE GUITARS REPRESENTATIVE AND A REFUND WILL ONLY BE ISSUED ONCE WE DEEM THE ITEM TO BE IN THE SAME CONDITION AS WHEN WE SHIPPED IT. Our return address is- Moore Music, 301 North Royal Avenue, Evansville, Indiana 47715 Thanks, The Crew at Moore Guitars
While continuing to keep the E string depressed at the first fret, move up the neck from the 12th fret to the end of the fretboard, continuing to depress the string at each of the successive frets. As you move up the fretboard, watch if and how much the distance between the bottom of the string and the top of the frets in the 6-7th fret range changes, if at all. The less the gap rises, the flatter, overall, the neck is. Using this method you may discern that there is more curve in one area than another, and not necessarily centering on the 6-7th fret area. In some cases this curve will be resolved by changing the tension on the truss rod. In other cases, adjusting the truss rod tension will not resolve them, and fret leveling, refretting, or heat bending the neck(rarely) may be necessary.
We supply different variants of Electric Bass Guitar, which is just an extension of the Electric Guitar. The only difference between the two is that the former comes with a longer neck and scale length. It also comes with an option of 4, 5 and 6 strings. The four string bass guitar is tuned in a way similar to tuning a double bass guitar. It is capable of

Figuring they know what they want in an amp far better than I do, I gave our panelists no instructions, other than to keep in mind that these amps were primarily for beginners and secondarily for more experienced players looking for a cheap portable amp. After each panelist tried all the amps, I asked their opinions of them. We didn’t discuss the prices since they were all so similar, but we did discuss some other practical considerations such as weight and size.


Just plug your guitar into the sound card input, start Guitar FX BOX and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice and other inputs. This sound processing program is acting just like a good collection of guitar effects pedals. You can use several of them at the same time, even all if you need so.
There’s a common belief that certain strings are better for beginners than others. While nylon strings can be easier on beginner’s fingers, the main thing that matters when it comes to guitar strings is the style of music you are planning to play, because the difference in feel and sound between the two materials is significant – even for a beginner.
Before we wade in, please note that National Dobro and subsequently Valco, more than most other manufacturers, were notorious for putting together guitars with parts left around. This, combined with the fact that they routinely used components (especially bodies) provided by other manufacturers, means that you are likely to find instruments with details inconsistent with catalog descriptions, and they may just be Kosher.

Next we look at the features and hardware of the guitar. What brand are the pickups? Is the bridge fixed or is there a tremolo system? Is there a locking nut or anything else to help with tuning stability? Does it come with a case? We also take this opportunity to look at any special features that define the guitar – perhaps a bridge that never goes out of tune, or a control switch that makes the guitar do crazy things.


Technically, distortion is defined as being any change to the original signal other than in level. However, we tend not to think of processes such as EQ and compression as distortion, and the term is more commonly used to describe processes that change the waveform in some radical and often level-dependent way. These include guitar overdrive, fuzz, and simply overdriving analogue circuitry or tape to achieve 'warmth'. In the analogue domain, heavy overdrive distortion is usually created by adding a lot of gain to the signal to provoke deliberate overloading in a specific part of the circuit. Such high levels of gain invariably bring up the level of hum and background noise, so it may be helpful to gate the source. Though overdriving analogue circuitry is the traditional way of creating intentional distortion, we now have many digital simulations, as well as some new and entirely digital sound-mangling algorithms.
Rack-mounted effects processors are another option, and are often used in pro and home studios as well as in stage rigs.. These effects units offer the same options as floor-based pedals and multi-effects units. They are simply mounted in a rack, and usually can be controlled with a foot pedal or the controls on their front panels. Newly developed iOS app-based and DAW-based effects add even more options to how you go about building an effects collection.
• Similarly, insert the Soft Clipper into the third insert slot and click on its Edit button. For settings, try putting the Input at ‑0.0, Mix at 55, 0.0, Second at 100, and Third at 57. As with the Compressor, set the output to a high level, again stopping short of distortion. These settings are intended to get you started; you may want to tweak them depending on your guitar, pickup, playing style, and so on.

Electronic crackling is a very common problem in electric guitars. Most likely, electronic crackling has very little to do with wiring. Usually the reason your guitar is crackling when you adjust the volume or tone knobs is because the pots are bad or dirty. Before you go and replace the pots on your electric guitar, I would try to use some Deoxit cleaner to see if the pots are just dirty.


Body Body shape: Double cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Swamp Ash body on translucent and burst finishes, Basswood on solid finishes Body finish: Gloss Orientation: Right handed Neck Neck shape: C medium Neck wood: Hard-rock Maple Joint: Bolt-on Scale length: 25.5 in. Truss rod: Standard Neck finish: Gloss Fretboard Material: Rosewoo
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
it has 3 lateral braces after the soundhole, 1 before, so I guess so. the saddle makes it so the truss is the only set up option. The action is high right now for me, so I hope a decent allen wrench will turn it and its not an old peice'o'poo worn out latter brace deal. when I looked for a "belly" it could have just been straight tilted over I guess and not looked the same.
I'm going to break the electric guitar setup guide into five parts, which are all in the links below. It's important to note that the five parts be done in the order in which they're presented. If you have a truss rod that's out of whack, it makes no sense to move on and adjust the bridge. I realize this may be painfully obvious, but for the one person who may not get it, I'm talking to you. Good luck
From the 1940s through 1990s, the company also manufactured various electric/electronic keyboards. Especially in the 1960s and 1990s, they manufactured a range of innovative and popular electromechanical keyboard instruments; the Cembalet, Pianet, Basset, Guitaret, and Clavinet. In the 1980s, several Casio synths were sold under the Hohner brand - for example, the Casio HT-3000/Hohner KS61midi and the VZ-1/HS-2).

Overdrive – A dynamic effect that sounds like your guitar tone is being played through an amp breaking up. Overdrives are more subtle than distortion effects. To achieve the original overdrive effect, a valve or vacuum tube amplifier would be “overdriven” by increasing the gain to the limits of the tubes. At this point, the vacuum tube can’t handle the voltage, starts “breaking up”, and adding extra overtones to the signal giving the sound distortion.


Most guitars will benefit from an annual setup, and instruments that are kept in less than ideal climate conditions (or that are on the road a lot) may need two per year. I’ll evaluate your guitar and make a recommendation. Setups may include truss rod lubrication and adjustment, saddle lowering to adjust action, nut slot adjustments, cleaning of grimy frets and fretboard, lubricating and tightening of tuners, and checking electronics and batteries. Price is based on what your guitar needs. The price range is for labor and does not include parts costs such as strings and bone nut and saddle blanks.
The best way to use this type of book is to just take 15 minutes a day to work through a page or two at a time. You don’t have to find something that requires a lot of study or dedication on your part at this point. Your first priority should be finding a book that gets you thinking about theory as well as helping you develop coordination in both your fretting and strumming hand.

A combo amp contains the amplifier and one or more speakers in a single cabinet. In a "head and speaker cabinet" configuration, the amplifier and speaker each have their own cabinet. The amplifier (head) may drive one or more speaker cabinets. In the 1920s, guitarists played through public address amplifiers, but by the 1940s, this was uncommon. A rare exception in the 1990s was grunge guitarist Kurt Cobain, who used four 800 watt PA amplifiers in his early guitar set-up.

Pickups are transducers that convert the mechanical energy of a vibrating guitar string into electrical energy by way of electromagnetic induction. It is a fundamental concept studied in physics and electronics that a changing magnetic field will generate a current through a coil of wire. The electric guitar pickup uses permanent magnets and pole pieces to form a steady magnetic field in the vicinity of each individual guitar string. An opposite magnetic polarity is induced in the metallic (steel core) guitar string when mounted above its respective pole piece and when the string moves, the otherwise steady magnetic field changes accordingly. Wire is wrapped around the poles thousands of times to form a coil within the magnetic field to pick up an induced current and voltage.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
The first step in deciphering the serial number is determining the country or facility in which the guitar was produced. In most cases the country of origin is provided in the same location as the serial number. In cases where you have a serial numbe r but not a country of origin, the origin can sometimes be deduced from the serial number, although in this case it's very helpful if you have at least a rough idea of the date of manufacture.
Modeling pedals use a host of methods to make your guitar sound like it’s coming from a specific sound source. For example, there are many pedals out there that are designed to model the sound of classic amps. This allows you to plug your amp and pedal straight into a PA system or even a pair of headphones, while maintaining the characteristics of the amp the pedal is modeled after. This also helps you avoid having to carry your amp with you everywhere you go.

Many guitars (even new guitars) need the frets leveled in order to play buzz-free with low action. Most electric guitars with bolt-on necks come from the factory with high tongue frets. Doing great fret work is a learned art, and I guarantee that you will be happy with mine. All my fret work jobs are performed with the guitar mounted in a neck jig that simulates string tension. This allows very accurate work. Re-fret jobs include leveling the fretboard if needed.

Modulating Offset: The output of solid-state amplifiers is directly connected to 2 DC power supplies through the output transistors. The instantaneous non-symmetry within the music waveform (particularly from the bass notes) is averaged as a modulating DC offset. This modulating offset is small, but it varies the efficiency of the speaker, introducing inter-modulation distortion, amplitude modulating the music. This problem is mostly eliminated by the trend to use an active sub-bass. In valve amplifiers the output transformer isolates the speaker from the amplifier electronics. No modulating offset can be produced.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"delay & reverb effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}

I got the idea for this column while reviewing Universal Audio's Ox Amp Top Box for the May 2018 issue. Ox is an ingenious hybrid of speaker load box/power attenuator and cabinet/mic/room/effects modeler. You use your regular amp, but instead of miking it, you send a direct signal to the DAW or mixing board. You record the sound of your amp, while Ox simulates speakers, mics, and effects.
{ "name": "Walnut", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut-1500000014893.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "11-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014893", "shipToStore": true, "displaySku": "J40301000005000", "displayId": "1500000014893   POS #: 112318365", "serialized": false, "stickerDesc":"Top Seller", "stickerDisplayText":"Top Seller", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000005000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Walnut/J40301000005000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Walnut", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.
In the entry-level market, brand-name guitar companies are usually forced to make their guitars with cheaper materials. There is a simple reason for this. Most major brand-name companies have a brand owner (sometimes an American company). That company buys from a factory in China, and in Australia they will have a distributor who will sell to a retailer (your local music store). It’s pretty easy to see why they can be forced to use cheaper materials. There is a lot of price pressure to get a guitar manufactured at a low enough price for everybody to take their cut of the profit down the chain.

{ "thumbImageID": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "defaultDisplayName": "Ibanez GIO series GRGR120EX Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "White", "sku": "sku:site51500000032825", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-White-1500000032825.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GIO-series-GRGR120EX-Electric-Guitar-White/J48397000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jewel Blue", "sku": "sku:site51500000032826", "price": "149.99", "regularPrice": "199.99", "msrpPrice": "399.99", "priceVisibility": "1", "skuUrl": "/Ibanez/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue-1500000032826.gc", "skuImageId": "GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000", "brandName": "Ibanez", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/GIO-series-GRGR120EX-Electric-Guitar-Jewel-Blue/J48397000001000-00-60x60.jpg", "imgAlt": "" } ] }

×