Two new 325s were created for Lennon and were shipped to him while The Beatles were in Miami Beach, Florida, on the same 1964 visit to the US: a one-off custom 12-string 325 model and an updated six-string model with modified electronics and vibrato. He used this newer 6-string model on The Beatles’ sequentially “second” appearance on The Ed Sullivan Show.[7]
Tony Visconti is also into using ambient mics: "I'm very much a fan of the room sound, too. I always record it if it's a real heavy rock guitar with power chords and crunches and all. I'll go around the room and clap my hands and I say, 'Put the mics there, that's it.' Quite often, I'll turn the room mic towards the studio window, and you'll get a reflection of the guitar sound — not directly facing it, because you're looking for reflections." Although he states in the same interview that he'll try to use a pair of U87s for ambience if possible, he's also mentioned elsewhere using PZM mics as an alternative.
My first electric was one of these (1962, I was 14) . My mother bought it by mail order, probably from the Bell's catalogue. I remember coming home from school every day for what seemed like weeks hoping it had arrived! It was very crudely made with a plywood body (mine was in a red finish). The neck was wide and flat (think that was ply too!) and the action appalling! I remember the original strings were copper wound and left you with green fingertips! I remember the price was around 14 pounds, quite a lot at the time! Even at that age I wasn't impressed for long and soon traded it in for a Hofner Clubman. Wish I still had it now though!
Guitar distortion is obtained and shaped at various points in the signal processing chain, including multiple stages of preamp distortion, power valve distortion, output and power transformer distortion, and guitar speaker distortion. Much of the distortion character or voicing is controlled by the frequency response before and after each distortion stage. This dependency of distortion voicing on frequency response can be heard in the effect that a wah pedal has on the subsequent distortion stage, or by using tone controls built into the guitar, the preamp or an EQ pedal to favor the bass or treble components of the guitar pickup signal prior to the first distortion stage. Some guitarists place an equalizer pedal after the distortion effect, to emphasize or de-emphasize different frequencies in the distorted signal.
I was at a friends house and he had a couple of his guitar playing buddies over. We got to talking about guitar repair and setups and such. Then one the guys said “the guy I use is the ever...”, and I was all like, “yeah I’m sure the guy you use is great, but the guy I know is better”. This went on, back and forth for a few minutes, when he blurted out, “I use the Cigainero brothers...”. I said “cool, me too” See More
Pedals. I have a basic rule when it comes to overdrives, distortions, and fuzzes: When I engage them, I want the volume to either stay the same or increase a bit, so I’m “pushing” the amp with the pedal. Because drives compress the sound, they can tend to seem louder overall when you turn them on, but actually they might be reducing the overall peak level. I don’t want to diminish the natural output level coming out of my guitar, and I don’t want my guitar tone to vanish in the mix when I hit a pedal. As I mentioned earlier, I often run the tone control quite low on drive pedals, which I feel keeps them sounding warm and natural.
Ken Rosser picked the Spider Classic 15 as his favorite of the amps we tested, saying, “I think the effects on the Line 6 sounded the best. It gives you a nice range of tone options. The clean tones stay clean even at loud volume, which a lot of these can’t do. One caveat is that, when you switch the amp sound, it changes the way all the knobs work, so the sounds can really jump out at you.” Fred Sokolow liked the Line 6 in general, saying, “I could pretty much figure out what to do with it, but I could figure out the Fender more easily.”
In addition to tuning and setting their guitar’s pickup configuration and tone control(s), electric guitarists must adjust the sound on their amplifier to achieve their preferred sounds. With the right settings, electric guitar players can play in a variety of styles from country chicken pickin’ to jazz, rock, blues, heavy metal and everywhere in between. This versatility can’t be matched by the acoustic guitar.
Paul Reed Smith Guitars (better known as PRS) is a Maryland-based manufacturer, and relatively new in the world of guitars – founded in 1980, when they began making a series of hand-built guitars. Today they have a wide range of models, which are built in both Asia and America, as well as a full roster of artists playing their guitars; including Mike Oldfield, Dave Navarro, Carlos Santana, and Mark Tremonti.
The SimulAnalog Guitar Suite is an old but still popular free guitar effects program. It contains a set of VST plugins that emulate some of the most common used guitar effects and amps. It has simulations of five essential guitar effects which include Boss DS-1, Boss SD-1, Tube Screamer, Oberheim PS-1 and Univox Univibe. The SimulAnalog Guitar Suite was born out of an academic research and thus applies a zero deception, no marketing hype approach. The interface is very basic but the sound is said to obtain lass than -40dB of difference compared to the original hardware.
PRS Guitars was founded in 1985 by Paul Reed Smith in Maryland, USA. They build high-end guitars, even if they also have a more affordable Asian range (the SE series). The most popular PRS endorser is Carlos Santana, but we could also count Dave Navarro and Al Di Meola among them. Santana's guitar is equipped with dual-coil pickups and a mahogany body with maple top. It looks a bit like a Les Paul with two cutaways. And the sound is closer to a Les Paul than to a Fender.

To quote the super-helpful, "The Hiwatt DR103 is notably louder and can also run much cleaner than 100-watt Marshalls when needed, and they also have tremendous headroom available. Playing a Hiwatt at a loud volume is, well, an experience." The site adds, "The Hiwatt DR103 design is based around the use of four EL-34 power tubes and four 12AX7 preamp tubes. The transformers are set up so that the amp can be used with various line voltages around the world and speaker impedance can also be set to 4, 8, or 16 ohms with two speaker outputs wired in parallel."
Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.
Sorry This guitar has SOLD OUT! Here is a wonderfully crafted in Japan 000-18 type acoustic guitar by the great Takamine in the prime time of the lawsuit copys made with Pride in Japan long gone these have been discontinued decades ago over the copyrights to this Headstock design and also the logo looks identical to the Old 50s early 60s Martin from a few feet away looks exactly the same, that said this example is like owning a fairly new Vintage it has aged near 40 years yet is still near mint condition w/ nice OHSC.
Nashville studio engineer Glen Snoddy discovered the Fuzz-Tone sound when recording Marty Robbin’s 1960 hit “Don’t Worry About Me.” Allegedly an overloaded transformer blew in a Langevin tube module, transforming Grady Martin’s bass guitar into a distorted, heavy fuzz. Some put the event down to another case of amplifier malfunction. Either way, Martin continued to use the tone throughout 1961 while Snoddy transistorized the malfunctioning circuit through trial and error, and sold it onto Gibson in 1962.
A semi-hollow thinline version appeared in 1968/69, designed by German guitar maker Roger Rossmeisl. Today two versions of the Thinline are available, the ’69 version has two standard Telecaster pickups and a mahogany body, while the ’72 version, based on the Fender Telecaster Deluxe, yields two Fender Wide Range pickups and a solid natural swamp ash body. In 2011, Fender released the Modern Player Telecaster Thinline as a part of the Modern Player series. The guitar features two MP-90 pickups, similar to the Gibson P-90. The Fender Custom Shop has a production model referred to as the “50’s Telecaster Thinline”, designed by master builder, Chris Fleming. Given that the first Thinlines appeared in the late 1960s, this name may seem inappropriate. However, the Custom Shop model, with its ash body and maple neck/fingerboard, as well as Nocaster pickups, shares enough DNA with the 50’s versions of the Telecaster to make the name a good fit.

To me the easiest way to learn to play songs on the guitar is to learn a few basic chords. You can even start with power chords. It may be helpful to set a goal of learning the I - IV and V chord of a particular key and then learning to transition between those three. In the key of C that would be I = C IV = F and V = G. Once you learn the basic I - IV and V chords and develop the ability to transition between them, you will know how to play all the chords required to play literally thousands of songs.

The Dobros and Nationals were joined by the first Supro guitar versions in late 1935, even though their announcement didn’t appear until a few months later in the March, 1936, The Music Trades. These first Supro guitars included an aluminum Hawaiian lap steel, both electric Spanish archtop 6-string and tenor guitars, and an electric mandolin. They mark the official beginning of the Supro story.
Ibanez' strategy to have virtuoso guitarists as endorsers have paid off big time, allowing them to not only produce signature instruments, but to also improve on their production line guitars using the ideas they compiled from various artists. Among their many signature instruments, the Ibanez JEM series is easily one of the most easily identifiable, thanks to its affiliation with guitar wizard Steve Vai and its unique monkey grip handle, which is carved into the body.
Guitar culture was pervasive, whether in movie houses (“Karate Kid” Ralph Macchio outdueling Steve Vai in the 1986 movie “Crossroads”; Michael J. Fox playing a blistering solo in “Back to the Future” and co-starring with Joan Jett in 1987’s rock-band drama “Light of Day”) or on MTV and the older, concert films featuring the Who and Led Zeppelin on seemingly endless repeats.

Seagull acoustic guitars are among the best values you are going find. They’re made in Canada, and there’s an attention to detail and craftsmanship here you may not expect in guitars at these price points. The Seagull Artist series is the top of the lineup. You’ll find unique tonewoods and high-quality construction techniques at an affordable price.
I took a guitar to this great place to have new strings put on it. I explained to the owner that the guitar belonged to my son who had been killed in a car accident. I was donating the guitar to a pro...gram called SOAR. A program for veterans to learn to play. They are a therapy type program for any veterans. Thank you for the help I received to be able to give this guitar to this worthy program. They are great people in the guitar store. See More
alright dude, i think this an awesome list. i hate looking things like this and seeing people put crap like slash at number 1 or something. this shows u obviously have great taste in music, but theres just a few things that struck me as odd. 1, no chuck berry. 2, really? john mayer? i admit he has technical skill, but saying hes one of the 10 best guitarists thats ever lived? thats just false. i mean what happened to jeff beck, santana, , eric clapton, harvey mandel, kurt cobain, and even trey anastasio(if that is how its spelled lol). they are all much much better then mayer could hope to be, both musically and technically,.
It’s easy to hear that Acoustic Revolutions is inspired by the Goo Goo Dolls, Counting Crows, Dave Matthews, but the loops are so perfectly dry and easy to mix that you can create a very modern sound. Volume II itself actually pushes the loops into that modern sound by pulling inspiration from popular indie-folk bands that dominated the first half of the 2010s.
If you are familiar with - a special kind of - programming, you can use something like Pure Data or Max MSP. Pure Data (PD), for example, is an open source, visual programming environment for manipulating streams of data like audio (or video). With PD you are able to build your own individual FX chains or use community contributed patches (In PD speech "programs" are called patches). But I think it's not as trivial to use as out of the box products.
For larger venues such as stadiums and outdoor music festivals, or for music genres that use bass instruments with an extended lower range and high stage volumes (e.g., heavy metal music, grunge, hardcore punk), bass players often use a more powerful amplifier (300 to 2000 watts or more) and one or more separate speaker cabinets (often called "cabs") in various combinations. Using a separate amplifier cabinet and speaker cabinets is colloquially referred to as a "bass stack". An example of the powerful, loud bass amplifier systems used in grunge is Alice in Chains bassist Mike Inez's setup. He uses four Ampeg SVT-2PRO amplifier heads, two of them plugged into four 1x18" subwoofer cabinets for the low register, and the other two plugged into two 8x10" cabinets.[7]
The 75 Watt Fender Rumble 75 Bass Combo Amp and its 150 Watt and 300 Watt counterparts can produce an overdrive effect by using the gain and blend controls, giving overdrive sounds ranging from "mellow warmth [to] heavy distorted tones".[27] The Fender SuperBassman is a 300-watt tube head which has a built-in overdrive channel. The Fender Bronco 40 includes a range of effects including modern bass overdrive, vintage overdrive and fuzz.
There are many excellent pedals out there, I especially like the ones that contain multiple reverbs like, plate, spring, hall, church, etc. Reverb can be a great subtle effect adding a slight bit of ambience to your guitar sound. This is especially nice when playing in small or dry rooms. Usually the larger the room, the less reverb you may want as the room produces its own reverb, which is exactly what we are trying to create with the effect! One of my favorite reverb tones is the old surf guitar sounds made famous by Dick Dale and the Ventures.

Rickenbacker is another famous American brand created in 1931 to build Hawaiian guitars, called "Frying pans" due to their typical shape. The brand incorporated guitars to its catalog a bit later. The models created by Roger Rossmeisl (Combo 4000 guitar, 4000 bass), a former Gibson collaborator and future Fender man in the 1950's, enjoyed a lot of success and became the brand's most typical designs. The 360, 370, 620, 660, and 4003 models can be connected to a Rick-O-Sound unit (a box with two mono outs) via a stereo 1/4" jack, which allows the two or three pickups to feed different amps. Most instruments have a dual truss rod and a varnished rosewood fretboard. Their distinctive jangle and chime emphasizes high frequencies, giving pretty good results with clean sounds. The Beatles, and especially John Lennon, often played Rickenbacker guitars at the dawn of their careers. Tom Petty, The Jam and R.E.M. are also Rickebacker users.

This happens when discussing variables within a number of different art forms—you simply can’t rely on scientific equipment to make some assessments. You can’t trust the gadgets; instead, you have to rely on your ears. Even relying on your ears can be difficult because it is, once again, a subjective discussion. “We don’t hear what’s out there,” Millard says. “We hear what we think we hear. It’s the psychological or neurological way we hear. To think we hear what sound is out there is so naïve and so wrong.” Trustworthiness aside, this brings us to another concept that pops up frequently when discussing the nature of tone: the role of good old fashioned, organic, human beings.
The Marshall Mini Jubilee 2525C Combo amp is closely based on the highly-coveted Marshall Jubilee series of amps. The powerful preamp has been designed to the specifications of the original 2525 Silver Jubilee diagrams, making this an authentic reproduction of these now out-of-production monsters of rock. Don’t let this little beast fool you though, the ECC83 & EL34 valve set produces some seriously loud sounds through the single 12” Celestion G12M–25 Greenback speaker. Perfect for lead and rhythm, this great combo amp is ideal for both stage and studio!
King V has got to be one of Jackson’s most iconic guitar families. The one we are looking at here is a but underpowered compared to the original King V, however it also comes at a much lower price. The whole package is well made and quality control is top notch. It takes some time to get used to the Flying V body shape, but once you do you’ll refuse to go back. Aside from looking good, this thing also brings a mighty sound.
In 1964 Hohner released The Beatles Harmonica Kit which was sold in a blister package, much like most Hohner harmonicas nowadays, retailed for $2.95, and help what Hohner calls "bring about a new popularity upsurge of the Hohner harmonica on both sides of the Atlantic.".[6] In the 1970s Hohner began manufacturing acoustic guitars,[7] and re-producing electric guitars.[5]

Amplifier heads are the standalone electronic components of an amp stack. A head unit is designed to be used with external speakers, and is usually much more powerful than the head section built into a combo amp. There are two main sections to the head unit: the preamp and the power amp. These circuits are one of the most important considerations when choosing your combo amp or head, because this is where tubes come into play. Check out the latest Fender Bassbreaker Amplifiers. They offer modern appointments while maintaining the vintage Fender sound. 

The Applause line is relevant because the technology used to make the aluminum and foam necks was subsequently applied to Ovation’s final American-made solidbodies, the Ultra Kaman or UK II, which was introduced in 1979. The UK II featured an aluminum frame with a urethane foam (Urelite) body, featuring the usual Ovation shape but with a little Tele-style curve on the upper shoulder and a sharp single cutaway. The top featured a contour like a carved top, although it was molded, of course. The neck was typically Ovation, with a bound 24-fret ebony fingerboard. Pickups had changed to twin-blade humbuckers, still in the smaller Ovation size. Electronics were fairly conventional, with a three-way select, two volume and two tone controls. No reference materials are available to me, but it appears that the earliest UK IIs had a little Les-Paul-style elevated pickguard and hollow bow-tie inlays. Also, the early UK IIs seem to have the plastic and metal bridge assemblies seen on earlier Preachers and Vipers. Later versions have the notched abalone block inlays, no pickguard and all-metal bridge assemblies. This is what makes me think the switch to metal bridges occurred in around 1980. As far as I know, the model name never appeared on the pickguard!
More theory: pickups have a couple of properties, namely phase and polarity. Depending on whether the pickups are in or out of phase and polarities are reversed or not, pickups can have properties such as hum canceling (this is utilized by humbucker pickups) hollowed-out sounds where out of phase pickups cancel out certain frequencies. Pickups also have output ratings. Higher output pickups generate hotter signals, and usually are less glassy. This is why guitarists prefer high out put pickups for rock and metal and others prefer low or medium output pickups. That is also why guitars in hard rock sound midrange heavy and other electric guitar styles have glassy and bright sounds.

Efficiency – also called sensitivity this is measured in dB at a distance of one metre. This has more to do with how loud a speaker sounds than its power rating. A Jensen P10R, for example, is rated at 95dB; a Celestion G12 65 at 97dB and an EVM12L at 100dB. The numbers don’t look that different, but the difference in terms of perceived volume is truly staggering.
Famous for having created reference electric guitars like the Telecaster and the Stratocaster in the 1950's, the US-based manufacturer has also been offering amps since 1948 to complement its guitar range. The first series was called "tweed" because of the typical cabinet covering. Among Fender's most well-known amps, we have the famous Bassman (1952), which was originally conceived for bass guitar, as its name implies, but turned out to be readily adopted by guitar players. The Twin (1952) and its different variations (especially the Twin Reverb) also influenced rock history with The Beatles, Jimi Hendrix and Eric Clapton. Fender's amplifier range is quite comprehensive (see the Hot Rod, Champ, Princeton, and Bandmaster series) and its common denominator is a clean sound that is still a reference in its category.
Since 1977, Dean Guitars has been a leading guitar company manufacturing the highest quality electric guitars, acoustics, and bass guitars for musicians of all ages and at all price ranges. From guitar legends to beginners, we offer a choice for any music genre or style. Browse guitars and more all packed with a limited life-time warranty. Get Your Wings today!
Flanging can be a subtle effect, thickening the sound and imparting a spacey feeling. Or it can be extremely dramatic when cranked up, to the point of making the original signal unrecognizable. This broad range makes a flanger a fun stomp box to experiment with. Jimmy Page used a flanger to good effect on Led Zeppelin’s “Nobody’s Fault But Mine” and “Kashmir, ” as did Jimi Hendrix on “Bold as Love.”
Sure, your pickups pick up the sound, and your amp amplifies it, but even before they get to handle it, your precious tone has already been formed by the interaction of string and wood. Pluck a string, and you set into motion a transference of vibrational energy from the strings into the wood of the body and neck (via different coupling elements such as bridge saddles, nut, and frets). The spectrum of sounds kicked out by this acoustic interaction is the biggest determining factor at the heart of the sound that eventually reaches the listener’s ear, however you delay, spin, or distort it along the way. Let’s look at the characteristic voices of a few tone woods, and see how they contribute to our guitar’s sound.
Think of Stevie Ray Vaughan, and you’ll have a good idea of what overdrive effects can do. They’re based on the ‘broken’ sound that vintage tube amplifiers would make when they were fed a signal too strong for them to handle smoothly. Modern overdrive pedals can also have circuitry that emulates the same effect even when connected to a solid-state amp. Because they work by boosting the signal, experimenting with the effects of an overdrive pedal can be as simple as adjusting the volume and seeing what happens.

Known for their distinctive jangle and chime, Rickenbacker guitars tended to be favoured by Jangle Pop, Power pop and British Invasion-style groups – bands such as The Who, The Byrds and The Beatles. The early Rickenbackers that made this sound famous were equipped with lower-output “Toaster” pickups. These pickups were phased out circa 1969-70 for newer “Hi-Gain” pickups, which had twice the output of their illustrious predecessors. This change was almost certainly due to the trend toward the louder “Rock” sounds of the 1970s, despite the earlier models being credited by Pete Townshend as being key to the development of “the Marshall sound” and his refinement of electric guitar feedback techniques[8]
The S2 Custom 24 features a mahogany body with book-matched flame maple top, that follows the same double cutaway shape and detailed arch as the original Custom 24. The guitar's mahogany neck is also not far off, being rafted from mahogany with PRS' distinctive 25" scale length. It has a 24-fret rosewood fingerboard that has a comfortably narrow nutwidth of 1.656". Finally, the S2 Custom 24 owes its voice to its dual humbucker pickups that include the S2 Vintage Bass and the S2 HFS Treble - which provide PRS' characteristically open and clear tone. You can push or pull the tone knob for single-coil tones should you need them.
i've got a a Ricky Tom Petty model (same as the 660-12) that I've had for almost 20 years. Plays great and the sound difference compared to a 360 is minimal, and I like it better because it has the old toaster pickups. The only thing I had to do it was pull off some of the windings on the pickups. They were up to 12K ohms, which is very high and makes the guitar sound too thick. Unwound to about 8K and they sound much better. I had a different Ricky with the narrow neck and it was painful to play at best with my fat fingers. The wider neck is a dream to play.
Launch price: $2,419 / £1,943 | Body: Alder | Neck: Maple | Scale: 24" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Bare Knuckle Johnny Marr single coils | Controls: Volume, tone, 4-way pickup selector switch, 2x 'bright' slide switches | Hardware: Jaguar bridge with Mustang saddles and vintage-style floating vibrato | Left-handed: No | Finish: Olympic White, Metallic KO
If the Schecter wasn’t quite fast enough, this lower priced version of Steve Vai’s signature guitar should get the job done. The Wizard III neck is a direct copy from its more-expensive variation, and when combined with the 24 jumbo frets, creates a speed machine. Because Vai himself is a versatile guitarist, though, this guitar can pretty much do it all, though if you like a chunky neck for chords, you’ll have to look elsewhere. You even get the Tree of Life inlay at twice price, which looks great.
OM-42PS: Paul Simon’s signature acoustic model (manufactured in the 1997 model year) is based on the OM-42, which had not been manufactured since 1930. Alterations were specifically requested by Simon himself. From the original planned run of approximately 500, only 223 were produced, making these a collector’s item. A standard version of the OM-42 is in the current range.
Power valves (tubes) can be overdriven in the same way that pre-amplifier valves can, but because these valves are designed to output more power, the distortion and character they add to the guitar's tone is unique. During the 1960s to early 1970s, distortion was primarily created by overdriving the power valves. Because they have become accustomed to this sound[dubious – discuss], many guitar players[who?] favour this type of distortion, and thus set their amps to maximum levels in order to drive the power section hard. Many valve-based amplifiers in common use have a push-pull output configuration in their power section, with matched pairs of tubes driving the output transformer. Power amplifier distortion is normally entirely symmetric, generating predominantly odd-order harmonics.
There are a few ways to save some money on your electric guitar (click for modal analysis). One way is to order online, for example from Amazon, which is usually cheaper than buying from a physical shop. Make sure that you know what the usual price for the guitar you want is, so that you can compare different sites, and in the best of worlds, use a discount code or wait until there’s a sale.
The dark underbelly is Lou Reed’s comfort zone. Despair and degradation are his muses. Emerging in the mid Sixties at the helm of the Velvet Underground, he offered up a gritty black-and-white alternative to the rainbow-colored pyschedelia of the prevailing rock culture. He brought us along, albeit reluctantly, to meet junkies and hustlers, S&M bondage goddesses and suicidal transvestites. He was one of the first rock guitarists to embrace chaos truly and wholeheartedly.
A 5 way selector is commonly found on guitars with 3 pickups , a humbucker in the bridge , single coil in the middle and a humbucker in the neck. So the 5 way selectors job is to select only one or more pickups at a time to offer different sounds on the guitar. The way the selector is pointed will tell you which pickup is selected and this is common on guitars from all brands. The bottom position is your bridge pickup which is closest to where the strings begin , the middle position is all 3 pickups and the top position closest to the neck is your guessed it neck pickup. The bridge pickup will offer heavier sounds if you play the right notes and the neck for soloing as the output (intensity) of the neck pickup isn't as powerful as the neck for a reason. The more you play the more you'll see uses for switching pickups on the selector. The tone knob on the other hand it depends on how you use it I know a lot of guys who are endorsed and so forth who never touch the tone knob or have guitars built without it , but used properly it can do a lot of stuff from Eric Clapton to Carlos Santana type stuff. you will also see a 5 way selector on guitars with two humbuckers this feature is called a mega or super switch depending on brand. It makes the pickups do different stuff but this feature is usually found on expensive guitars and keep in mind a 3 way blade switch looks like one but only goes in three positions. Bridge , middle and neck.
Bought this to replace my Digitech RP 255 which I had better presets and found a little easier to setup- but I have every confidence this unit will give me sounds I like just as well- I already like the clean sound better, plus it is a much smaller and lighter unit which was one of my main goals. My pedal board has a GR33 guitar synth, a boost and a headphone amp. Those units and power supplies were getting too heavy.
Located in Reno, Nevada, our shop, The Strings of Reno provides services to both local musicians as well as those located throughout the United States and even abroad. If you are nearby, and would like a one on one appointment please give us a call. If you are not within driving distance of Reno, NV, please call or email us with the nature of the work you need taken care of. We are not just about guitars, if it has strings, we can fix it!
Some resonator guitars possess metal bodies and these are called steel guitars. This can lead to some confusion with the Hawaiian guitar of the same name. They are two distinct instruments. The Hawaiian steel guitar takes its name from the steel bar used to create the glissandi and the Resonator steel guitar refers to the material used for the construction of the body.
The core metal used for strings is an important variable to consider.  Not only does the string core affect tone, but it affects the tension strength as well.  The heavier the string gauge, the stronger the core metal needed.  You don’t want premature string breakage, especially during a gig.  Your options absolutely depend on the tone you desire, but they also depend on the string gauge you prefer for the genre of music you play.

In the mid-1950s, guitar distortion sounds started to evolve based on sounds created earlier in the decade by accidental damage to amps, such as in the popular early recording of the 1951 Ike Turner and the Kings of Rhythm song "Rocket 88", where guitarist Willie Kizart used a vacuum tube amplifier that had a speaker cone,[12][13] slightly damaged in transport.[14] Rock guitarists began intentionally "doctoring" amplifiers and speakers in order to emulate this form of distortion.[15] In 1956, guitarist Paul Burlison of the Johnny Burnette Trio deliberately dislodged a vacuum tube in his amplifier to record "The Train Kept A-Rollin" after a reviewer raved about the sound Burlison's damaged amplifier produced during a live performance. According to other sources Burlison's amp had a partially broken loudspeaker cone. Pop-oriented producers were horrified by that eerie "two-tone" sound, quite clean on trebles but strongly distorted on basses, but Burnette insisted to publish the sessions, arguing that "that guitar sounds like a nice horn section".[16]
"Rocksmith 2014" is geared toward beginners and starts with the basics, like getting your guitar in tune. Then it'll pick a song based on your skill level. The earlier version's "journey" mode has been replaced by a "mission" mode (it is a video game, after all) with tasks like playing a song that "Rocksmith" recommends or hitting 75 percent accuracy. You get feedback after each run through a song, and you have tasks to check off as you play, like hitting five notes in a row. As you succeed, the game throws more tasks and notes at you, adjusting the difficulty as you go.

Johnny was a strange case, a rock and roll outsider who was obsessed with uniformity. And that obsession helped forge the Ramones aesthetic: the identikit leather jackets and ripped jeans worn by each band member, the single surname shared by all four (in the absence of any actual familial kinship) and the terse pacing of the music itself, with not a single excessive note or lyrical utterance.
Spanish-style electrics, which you could sling in front of you while standing and singing, proved to be much more versatile for many different musical genres. Gibson’s 1936 ES-150 (E for Electric and S for Spanish) had a sleek bar-shaped electronic pickup that was mounted into the guitar’s hollow body for a more streamlined look. The pickup earned the nickname “the Charlie Christian” thanks to the jazz virtuoso who is generally credited with introducing the electric guitar solo. In 1939, Christian stepped out in front of Benny Goodman’s band and performed long, complicated passages imitating the style of horn playing. He explained, “Guitar players have long needed a champion, someone to explain to the world that a guitarist is something more than a robot pluckin’ on a gadget to keep the rhythm going.”
Sweet and tasty Smooth Jazz track. Featured electric and acoustic pianos, electric organ with synth. Rhythm electric guitar playing chords and another creamy electric guitar playing solo. Also, this track has warm and wide bass guitar with drums and percussion. This track is great for presentations, advertising, real estate background, Youtube and other videos.
The music industry is one that has really felt the effects of the digitalization of the world over the last few decades. In the 1970s and '80s, recording, composing and production work would have been done manually with a complicated series of hardware mixers, synths, sequencers and other devices. Today, all you have to do is plug into a computer running the music software that's relevant to the task. These programs and tools don't only make it possible for you to work faster; you can also get started sooner, since a large selection of software packages are available to download directly. You won't need to wait for shipping: just download and start working.

The Axe-Fx II is also the world’s most powerful hardware multi-effects. To use it with an amp, just create presets with no AMP or CAB blocks. Some people run separate chains of effects —some before the amp and others in its loop. This is called the “four cable method.” Or better still: match the sound of your amp and send THAT to front of house while you use your amp on stage in all its glory.

The original Les Paul featured a solid mahogany body capped with a maple top, which produced an instrument capable of many tonal variants with maximum sustain.  Although the first Les Pauls included two P-90 pickups, they are most well known for their two PAF humbucking pickups.  While many variants are produced, the double humbuckers put the Les Paul in a league of its own, separate from the offerings of Fender’s Telecaster and Stratocaster.

Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
I had just finished signing up for I am a 54-year-old disabled Miner of 22 years, so I thought I would try to take up playing the guitar once again like I did when I was a kid. I forgot a lot about it through the years as life moved on, but now all I have is time. I came across your website and thought why not give it a try. so anything you suggest I will try once twice if I like it lol
Under the ’38 Avalon Hawaiian was a Supro Electric Hawaiian Guitar. This had a similar shape but was covered in “radiant crystal silver.” This was not pearloid, as is often assumed, but rather a silver paint (possibly a Duco leftover from the aluminum steels) with a crystalline additive similar to that used on Duolian finishes. The head was slightly rounded. The fingerboard was black. A handrest covered the pickup/tailpiece assembly. One volume control sat on a square plate on the treble side, reminiscent of the previously mentioned Supro Hawaiian Model in the ’38 Sorkin and ’39 Grossman books. This cost $30.
The “Studio” model was introduced in 1983, and is still in production. The intended market for this guitar was the studio musician; therefore, the design features of the “Les Paul Studio” were centered on optimal sound output. This model retained only the elements of the Gibson Les Paul that contributed to tone and playability, including the carved maple top and standard mechanical and electronic hardware. However, the Studio design omitted several stock Gibson ornamentations that did not affect sound quality, including the binding on the body and neck. The two notable exceptions to this are the Studio Standard and the Studio Custom. Both models were produced in the mid-1980s, and included body and neck binding, though with dot fingerboard inlays instead of more ornate trapezoids. The first Studios from 83 to 86, except for Studio Standard and Studio Custom, were made with alder bodies rather than mahogany/maple. The current Studios come with a chambered mahogany body with either a maple or mahogany cap. The entry level Les Paul Studio “faded” has a chambered mahogany body and top and a satin finish and is the lowest priced Gibson USA Les Paul.
What most of us know as the classic ’60s Teisco line began in 1964. The year marked both the debut of many new guitar models, noted by a transition to a new headstock designs (which can help you date a particular guitar). As already noted, Teisco headstocks through the ’50s were mainly variants of the Gibson three-and-three. Indeed, these remained into the ’60s on Teisco hollowbodies.
Since 1977, Dean Guitars has been a leading guitar company manufacturing the highest quality electric guitars, acoustics, and bass guitars for musicians of all ages and at all price ranges. From guitar legends to beginners, we offer a choice for any music genre or style. Browse guitars and more all packed with a limited life-time warranty. Get Your Wings today!
That wraps it up folks! We hope you found some inspiration from our chart and managed to get a little closer to finding your best guitar for jazz. Now it’s simply a matter of reading some reviews, watching some videos and making a decision! Don’t forget, if this is your first guitar, you’ll need to buy a good amplifier to go with it. If you liked our stuff, you can subscribe to our newsletter for more sensational guitar deals.
I see a bunch of people all over social network sites and youtube videos responding with things like "who needs it, just give me a guitar and a tube amp" whenever news about a pedal of some kind comes up. What's so wrong with pedals? For some reason there's a stigma against them that "bad players use pedals to mask how bad they are" when most people use them to get sounds out of their guitar that you normally can't without them. I don't understand why so many people opt for the "guitar right into an amp" sound when there's so much more available.
A different take on the standard tone control is the Varitone circuit sometimes used on Gibson guitars (such as the Blueshawk). The Varitone is actually a variable notch filter consisting of one of several capacitors (selected with a rotary switch) in series with an inductor, forming an LC circuit.[15] When placed between the signal and ground, this circuit starts to attenuate frequencies around its resonant frequency, as determined by the following formula:

Thanks for popping in! Yeah, that g-string issue's a real pain. I also get it on acoustics for the same reason. I've found that, aside from sloping the slot DOWN on the peghead side, if you also try to provide a gentle (side) edge where it starts to head towards the g tuner, that helps too. What I'm trying to say is that you should try to give as clear a path as possible to the tuner to reduce interference/friction. I've tried to illustrate what I mean here: but let me know if it's not clear. More on making a nut here, by the way:
HOLLYWOOD, CALIF. (JANUARY 25, 2018)—Fender Musical Instruments Corporation (FMIC) today announced the all-new California Series acoustic guitars, celebrating the lifestyle and culture associated with the region and the brands Southern California roots. Energetic and independent, this family of guitars defies acoustic guitar conventions with a visible look and feel of Fender’s famous electric guitars – from the Stratocaster® headstocks and vibrant colors, to the distinctive Fender body shapes that mark players as visionary artists. Lively-sounding – California Series acoustic guitars capture the laid back, yet energetic California lifestyle – from the beach to the festival stage.
Based both in Japan and the USA, this Japanese manufacturer produces guitars under different brand names: "ESP Standard," "ESP Custom Shop," "LTD Guitars and Basses," "Navigator," "Edwards Guitar and Basses," and "Grass Roots." Hisatake Shibuya opened his "Electric Sound Product" store in 1975 where he used to sell guitar spare parts. He then started to build his own parts and became a Kramer and Schecter subcontractor. His first signature guitar went to George Lynch (the Kamikaze), while the powerful Gibson Explorer copy designed for metal heads and adopted by a certain James Hetfield (Metallica) became almost as popular as its owner in the late 1980's and early 1990's.
How are we supposed to choose an Ibanez model? Well, here’s what we went with. Made out of mahogany with a vintage look to appease the masses, the Ibanez Roadcore RC365H offers a retro feel with a modern sound. The f-hole on the lower part of the guitar creates a deep and rich resonant sound, while the neck contains an RC bolt that adds both warmth and depth to the notes. Due to the stringing throughout the body and an improved bridge, tuning becomes easier while switching through progressions, while the rosewood fingerboard presents both style and comfortability. The highly touted feature on this guitar is the custom designed Core-Tone pickup, reducing additional hum and reverberation for clarity in tone. With various tones provided by a three-way selector, this electric guitar offers high-quality features while maintaining a classic rock-and-roll vibe.
Hi-Gain (descended from the more generic electric guitar amplification term high-gain) is the sound most used in heavy metal. High gain in normal electric guitar playing simply references a thick sound produced by heavily overdriven amplifier tubes, a distortion pedal, or some combination of both--the essential component is the typically loud, thick, harmonically rich, and sustaining quality of the tone. However, the Hi-Gain sound of modern pedals is somewhat distinct from, although descended from, this sound. The distortion often produces sounds not possible any other way. Many extreme distortions are either hi-gain or the descendents of such. The Mesa Boogie Triple Rectifier Series of amps are an example.
This is a right handed 2018 Gibson Custom Shop Explorer, Extra/Elbow Cut, with a heavy aged relicing, Natural Finish, Gold plated Nickel hardware. This model is patterned after the 1958 Explorer owned by Eric Clapton. It is brand new with OHSC, COA, and all paperwork/tags. The weight is light at only 7 lbs, 12 oz. This is only one of a limited run of 5 in the Natural Finish. I also have the same guitar in Cherry finish, one of only 5 in the Cherry finish.
It looks like a Gibson. but it’s another Epiphone — the Epiphone Les Paul Special II. This is the other iconic shape in electric guitars, the Gibson Les Paul, and Epiphone make the budget-priced version with this one listed at $170. In another blog we’ll explain the primary differences between Gibson and Fender guitars. For now, just know it’s like an Apple versus Windows kind of debate. Really.
At the more reasonable end of the price scale compared to other Gretsch guitars, sits the Gretsch G2655T Streamliner. While not an arch top like the guitars listed previously, this guitar does feature a hollow bodied design. As such, it perfect for clear, ringing chords and lead lines. Also in its favour is the G2655T Streamliner’s thinner body depth. This makes it more comfortable and slightly less cumbersome than the bigger, more traditional jazz guitars. You’ll also get more versatility from a ‘regular’ semi acoustic, meaning you can dabble in blues, rock and country with the Streamliner models.
In terms of the Teisco brand, the moving force was Jack Westheimer and his W.M.I. company in Chicago. According to published accounts, Westheimer began importing Teisco-made Kingstons in around 1961, although these were not promoted in the trade press until the beginning of ’64. It was this connection that would make Teisco the dominant powerhouse it was to become.
{ "thumbImageID": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "defaultDisplayName": "Yamaha FX335C Dreadnought Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Tobacco Sunburst", "sku": "sku:site51500000000265", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst-1500000000265.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Tobacco-Sunburst/J29063000003000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000000264", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Black-1500000000264.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Black/J29063000002000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51500000000262", "price": "199.99", "regularPrice": "249.99", "msrpPrice": "249.99", "priceVisibility": "1", "skuUrl": "/Yamaha/FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural-1500000000262.gc", "skuImageId": "FX335C-Dreadnought-Acoustic-Electric-Guitar-Natural/J29063000001000", "brandName": "Yamaha", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Unlike acoustic guitars, solid-body electric guitars have no vibrating soundboard to amplify string vibration. Instead, solid-body instruments depend on electric pickups and an amplifier (or amp) and speaker. The solid body ensures that the amplified sound reproduces the string vibration alone, thus avoiding the wolf tones and unwanted feedback associated with amplified acoustic guitars. These guitars are generally made of hardwood covered with a hard polymer finish, often polyester or lacquer. In large production facilities, the wood is stored for three to six months in a wood-drying kiln before being cut to shape. Premium custom-built guitars are frequently made with much older, hand-selected wood.
If you have a little bit more to spend than what you pay for the Epiphone LP Special II you might want to consider the Epiphone Les Paul 100. It has a mahogany body with a maple top, mahogany neck and rosewood fingerboard. It’s got solid tuners and hardware, a 3-way switch and two tone and volume knobs. It’s slimmer and therefore much lighter than the Gibson Les Paul. The Epiphone LP 100 feels and plays good. It’s a reliable and durable guitar. A great choice for rock and blues!

A lot of folks really like Squier guitars. In most cases, I'm not one of them. Fender’s economy guitars (Squiers) are cheap, coming in under $400 (often $200 or less), which can be an attractive option for a first-time buyer. However the price difference between a Squier Strat and a real deal Fender Strat isn’t big enough to make up for the quality hit you take when you buy a Squier.

Having said this, if it’s for a child under 12 we normally do recommend a nylon string as it’s easier for them to press the strings down. Some children can have tougher hands than others, so if you have a rough and tumble child, they mght be able to handle steel strings earlier than usual. Check out our buying guide for Choosing a Guitar for a Child for more information.
Packing almost the entire tonal essence of 80's arena rock n' roll into one bar-shaped unit, with a glassy and transparent, BBD-style chorus, a crushing hot rod Marshall-stack crunch distortion, a natural-sounding delay, and a spacious reverb. Turn on every module on the bar, with a little tweaking, you've got yourself THE EPIC lead tone, which is dynamic, responsive to your hands, with long sustain, and cuts through the mix like a knife through butter. A built-in cab simulator for getting a real guitar cabinet sound straight from the PA system; Max delay time: 500ms It is the ultimate tool for road touring gigs. Aluminum-alloy, metal casing, stable and strong; compact size. Grab it! Plug it! Tweak it! Rock it! LED indicator shows the working state; Power: DC 9V 5.5x2.1mm center negative,.
One of the most over looked and shockingly good guitars I have ever played in my 23 years of chopping wood. In their rich history there have been little misses, but over all Aria guitars are supreme to their competitor especially at the price point. My 1977 Aria les paul copy has at leased twice the balls as my buddy's 6 year old Gibson and tons more playability. Forget about comparing to epiphone, seriously. eBay yourself a Aria electric and you WILL be pleasantly surprised. Aria acoustics; If your reaching for a nylon, Aria makes some of the best classical guitars with a history of employing some of the most well noted artisans of the craft, such as Ryoji Matsuoka. Fine craftsmanship all around, built with quality woods and have a tendency to get better with age, laminated or not. As for steal strings, I've only played one to be honest, but this Martin 'lawsuit' was a work of art. Thank you.

In 1966 Vox introduced the revolutionary but problematic GuitarOrgan, a Phantom VI guitar with internal organ electronics. The instrument's trigger mechanism required a specially-wired plectrum that completed circuit connections to each fret, resulting in a very wide and unwieldy neck. John Lennon was given one in a bid to secure an endorsement, though this never panned out. According to Up-Tight: the Velvet Underground Story, Brian Jones of the Rolling Stones also tried one; when asked by the Velvets if it "worked", his answer was negative. The instrument never became popular, but it was a precursor to the modern guitar synthesizer.

Gold Plated strings are really just 80/20 Bronze & Zinc wound nylon strings.  They are also used to produce the bass wound strings of a set of classical strings.  They maintain their place in the market due to having a much brighter tone than silver plated strings and are used by many professionals due to their capability to project louder and sharper.
The modern era of Ibanez guitars began in 1957 [3] and the late 1950s and 1960s Ibanez catalogues [1] show guitars with some wild looking designs [2]. Japanese guitar makers in the 1960s were mostly copying European guitar designs and some of the late 1960s Ibanez designs were similar to Hagström and Eko guitar designs. Hoshino Gakki used the Teisco and FujiGen Gakki guitar factories to manufacture Ibanez guitars after they stopped manufacturing their own guitars in 1966 and after the Teisco guitar factory closed down in 1969/1970 Hoshino Gakki used the FujiGen Gakki guitar factory to make most Ibanez guitars.
On December 22, 1969, the Gibson parent company Chicago Musical Instruments was taken over by the South American brewing conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments. Norlin Musical Instruments was a member of Norlin Industries which was named for ECL president Norton Stevens and CMI president Arnold Berlin. This began an era characterized by corporate mismanagement and decreasing product quality.
The Guitar Chords: Easy-to-Use, Easy-to-Carry, One Chord on Every Page does one thing extremely well: it is spiral bound. It’s more of a reference than anything else, but one that musicians of all levels will appreciate. It covers the gamut of chords with not just one but two variations of each one. Of course, many have more than that, but it’s good information just the same.
Also included was the GP, an equal double-cutaway model with a mahogany body, flamed maple carved top, glued-in neck, fine-tune bridge and stop tailpiece. The only models I’ve seen, which were also advertised, had twin humbuckers and conventional electronics. One source refers to a GP-1, which by nomenclature would suggest a single humbucker, but it’s not known if this ever actually existed. Also, it’s not clear if the GPs came in parts or fully assembled.
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: ibanez","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop by brand: ibanez","eVar3":"shop","prop2":"[gc] shop by brand: ibanez","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop by brand: ibanez","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"ibanez","prop5":"[gc] shop by brand: ibanez","prop6":"[gc] shop by brand: ibanez","prop3":"[gc] shop by brand: ibanez","prop4":"[gc] shop by brand: ibanez","eVar1":"ibanez","prop9":"2875","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,","prop7":"[gc] site section","prop8":"ibanez"}

Compressors – The role of these pedals is to lift up quiet sounds and rein in loud sounds, compressing the dynamic range of your signal – that is, the difference between the quietest and loudest sounds. They work wonders for songs with a blend of quiet and loud parts, since they let you play hard without busting eardrums, and the soft sections won’t be drowned out by ringing ears. Compressors also have the nice side effect of increasing sustain, letting your notes sound out longer before dropping off.
This guitar is one of the most appreciated units on the market at the current time. This unit is prized for the fact that it comes equipped with a particularly sturdy body that has been made out of solid wood. Even more so, the body of this instrument was constructed using mahogany, hence its durability, while its top part contains maple. Consequently, this unit is glossy and has an appealing clear-cut design that you are prone to enjoy.
While National blithely ignored Beauchamp’s electric experiments, their competition – Dobro – was next to enter the electric arena as early as 1933, with the introduction of the Dobro All-Electric. Basically, the All-Electric was a mahogany-bodied Model 37, most usually outfitted with a 12-fret square neck. It had a large lightning-bolt-engraved coverplate, two screen holes, three little holes under the fingerboard, a slothead, and rosewood ‘board with dot inlays. Instead of the usual resonator, this had a large metal plate where the cone assembly would normally be and a Stimson pickup mounted just in front of the bridge, curiously enough with the poles slanted from the bass side near the bridge toward the middle on the treble side.
From the standpoint of theoretical perfection, the Baxendall tone control is the opposite of the Fender tone stack. With bass and treble variations that are mostly independent, the frequency response is quite flat when both controls are set to the middle of their range using linear pots. Using the opamp/feedback form of the controls means that there is no signal loss that needs be made up elsewhere. This is virtually the standard for hi-fi tone controls. However, there are some guitar amps which use this form of control, tweaked a bit to match the guitar frequencies.
Most users and experts agree that the Zoom MultiStomp MS-50G is a high quality and high value pedal. But it's not just about bang per buck, because many are satisfied with the quality of its effect and amp emulations. Even Music Radar is convinced of its performance saying, "While not all of the sounds are going to appeal to all players, there are enough usable tones here to make this a very practical item for just about anybody who uses effects."
#A1056:Another super rare piece from Guitars West! This little number found its way across the pond and onto our doorstep. A very early VamPower 70's 100 watt P.A. 6 channel input head. With speaker channels, one 4 ohm-100w-#1 & 2 input, one 8 ohm-100w-#3 & 4 input, one 15 ohm-100w-# 5 input, two 8 ohm-50w-# 1 & 2 input, two 15 ohm-50w-# 3 & 4 input.
The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
: I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.

A rackmount effects unit may contain an electronic circuit nearly identical to a stompbox-based effect, but it is mounted in a standard 19" equipment rack, which is usually mounted in a road case that is designed to protect the equipment during transport. More recently, as signal-processing technology continuously becomes more feature-dense, rack-mount effects units frequently contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.