ACT TRMOLO ERSETZEN DER SAITEN Das ACT Tremolo erlaubt zwei Arten der Saiteninstallation. 1) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Rückseite der Tremolo-Einheit angebracht. 2) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Unterseite der Tremolo-Einheit angebracht.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.

We are going to start with a Fender amplifier. This Mustang I V2 is a 20-watt combo amp that has won over hearts of a lot of players because of its ease of use and versatility. With one channel that has 24 presets and eighteen amp models you won’t be scrambling for diversity. Apart from that, of course, you get some of the major controls like Gain, Volume, Treble, Bass, Master, Preset Select, Modulation Select, Delay/Reverb Select, Save, Exit and Tap Tempo. The size and price of this model really do not do it justice (I mean, don’t make it more pricey but still). You also will find that this amp features USB connectivity, chromatic tuner and black textured vinyl covering with silver grille cloth that accentuates the simple and elegant look of this model. While 20-watt, as you might know, is not much (unless it’s a tube amplifier) this baby is pretty great if you want it for practice.

Sorry Joe but I don’t really any value of this arrangement. It could work only in super bright guitars that would always need some treble bleed. It’s much better to change pot values for guitars like that, go from 500K to 250K etc. When changing pots doesn’t cut it it’s better to get rid of the pickups/guitar than to have a bleed circuit on all the time, some of the magic is always lost.
Other defining features include its 3 on a side tuners on a painted headstock, a bound neck and body with trapezoid or block inlays on rosewood or ebony, and its Tune-O-Matic bridge with the Stop Bar tailpiece.  While some of these features are wonderfully cosmetic, the components such as the bridge set-up and pickup selection gave the Les Paul the massive sound and sustain for which the guitar is renowned.

I have a sunset hellraiser fr. I have been playing for 8yrs and it is by far the best guitar I have ever owned or even played. Next to the ltd models that I was considering the schecter had better quality, feel, and sound at almost HALF the price of the high end lts. The quality of the abalone inlays, the finish (black cherry), the original floyd, grover tuners, 24 fret rosewood board, incredible set neck (you would think its a neckthrough without checking the specs), and the coil tapping emgs is unbelievable. I could go on forever about this guitar's action, sound, feel, quality, looks... I have spent over a 1000$ on a few dif. Guitars and I will never do it again. Ex- zack wylde epi, 2 usa fenders couple mex. 1's, a gibson Linkin Park standard, ltd kh-602, and a really nice jackson dinky style(not sure model) with 3 carvin humbuckers coiltaped just to name a few. Hellraiser is better than all of them. I recommend any of the hellraiser guitars especially with coil tapping emgs.
After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.

{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LC100-Classical-Guitar-Natural/518978000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LC100-Classical-Guitar-Black/518978000001000-00-60x60.jpg", "imgAlt": "" } ] }
I bought my 10 year old son a digitech RP355 multi effects pedal to use. It's cheap and simple to edit patches for different sounds and you can download patches to get the sound used in some popular songs but the thing I like best about it is the amplifier emulation. After using it for a while my son found he liked the sound of Vox amps so we bought a AC4 and it sounds great. I liked the fender deluxe and bassman amps so I had a deluxe amp circuit built by a local amp guy. Later on you will find that you want to move on to real pedals as they sound better so a multieffects pedal is a good way to sample a lot of different effects in one package. Most multi effect pedals have a sampling function so you can record a short song segment and then the unit will replay it while you solo along. Some also have the ability to record from an outside source and then play it back at slower speed so you can learn tricky licks. Lastly, most units have drum tracks which is a great way to play along and stay on time.

For years, Seymour Duncan has provided guitarists with first-rate, handmade pickups and parts that are anything but stock. All of our products are designed and customized to suit the needs of specific musical styles and the musicians thereof. If you’ve got a guitar that doesn’t have a good-quality set of pickups and seems to lack that “extra something” in the tone department, investing in a set of pickups is your first stop.
1960's Harmony H-54 Rocket 2 Redburst- Here's another excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. There's just limited amount of wear on tips of headstock with a amlost perfect back. Two great sounding DeArmond Gold Foil Pickups power this baby. Guitar has a 4 bolt neck which was the better neck from Harmony. It's all original, except for the pick guard, which no one can detect. Condition excellent for this great 50 year old beauty. SOLD
Gibson dates back to the late 1800s, when Orville Gibson patented a mandolin design that was much more durable than other instruments at that time. He sold these instruments out of a one-room workshop in Kalamazoo, MI, until his death in 1918. The designs lived on, however, as the company hired designer Lloyd Lear to continue creating new instruments.
It’s interesting to note that luthier Steve Klein introduced a guitar that got a lot of press in the early ’80s with a body virtually identical to the Ovation Breadwinner. According to Charles’ son (and future president of Kaman Corporation), Bill Kaman, Jr., Ovation considered “pointing this out” (i.e., legal action), but given its bad track record with solidbodies, figured it wasn’t worth the effort.
Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.

First of all, the pickup configuration is getting into the heavy metal side of things and, like the two previous recommendations, it offers a great introduction into changing your sounds on the fly. You know that expert players are constantly stomping on effects pedals to change the tone of the guitar, but they’re also tweaking the pickup positions, tones and volumes to create unique sounds, too.

Although there are now several digital guitar recording preamps which model amps and cabs, the Roland VG88's split pickup system allows you also to experiment with modelled guitars and pickups.Digital noise removal plug-ins (again best used before delay effects are added), produce even fewer side-effects and so may be the best option when recording into a computer-based system. However, you can often achieve a worthwhile improvement using simple low-pass filters — before I moved over to working almost exclusively on the computer, I often used the side-chain high-cut filter in my Drawmer DS201 gate to remove hiss from guitar tracks. The sharper the filter, the less the wanted sound will be affected, so a plug-in with an 18 or even 24dB/octave slope should be even more effective than the 12dB/octave filters the Drawmer uses. The trick when setting them up is to pick the lowest shelving frequency that doesn't materially change the original sound, other than to take the edge off the hiss. Using filters in this way also helps reduce finger noise and squeaking on acoustic guitar parts and can even help disguise moderate clipping distortion caused by recording at too high a level.
12. Once your wiring loom is complete, install it in the guitar, and reattach the pickup and ground wires. Test the guitar through your amp and make sure everything is working. If it is, congratulate yourself on a job well done. If it’s not, check that you’ve wired everything together properly. Also, check your solder joints and redo any that aren’t shiny or look a little iffy.
{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] services:repairs","prop2":"[gc] services:repairs","prop1":"[gc] services","prop5":"[gc] services:repairs","prop6":"[gc] services:repairs","prop3":"[gc] services:repairs","evar51":"default: united states","prop4":"[gc] services:repairs","channel":"[gc] services","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] services"}
1979 Alvarez 5053 - D-45 Martin Style Replica Japan Crafted Exotic Brazilian Jacaranda Rosewood Here we have a really great one from our 30 years of Alvarez collecting and she is absolutely one of the finest Alvarez model Martin Copies crafted in Japan from this golden era the late 1970's.. This example is a 1979 #5053.. its ALL ORIGINAL with the only exceptions being we changed the old cheap tone defeating plastic nut & saddle for the preferable upgrade to a Martin bone nut & compensated saddle set and of course the Martin Marquis 80/20 Phosphorus bronze strings 12’s strings along with the Martin Bridge pins as seen. This is a unique & exotic true Vintage Japanese version of the classic ornate Martin D-45 again this one was Crafted in Japan by one of the finest acoustic instrument builders from this time period Alvarez, This guitar is possibly even a bit more fancy than even the actual Martin D-45 with the intricate exotic woods used see this examples exotic Beautiful 3-piece back simply gorgeous! The Martin D-45 version just has a 2-piece back in most cases...This example is a RARE Alvarez with such woods and its workmanship level is very ghigh suggesting a master luthiers hand its model #5053, with the date stamped inside on the label reads ( 1979 ).,,see pic detail. Bound body(front w/b/w/b/w/b/w, back w/b/w/b),bound neck(white),bound peg head(w/b/w). See the Beautiful detailed Abalone inlay around the sound hole with its white mother of pearl fret markers. With an adjustable Ebony bridge with a bone saddle and the sweet smelling Brazilian Jacaranda Rosewood fretboard its simply stunning. Special truss rod cover that has the word Alvarez in gold lettering and SLM (Saint Louis Music)in gold also. Medallion on the back of the headstock says imported and customized Saint Louis Music since 1922. Choice Sitka AAA Spruce top, with old highly exotic looking Jacaranda Brazilian Rosewood - awesome landscape figure sides are very figured exotic looking Jacaranda. Smells great. Wonderful exotic figuring. for the back and sides Better looking we haven’y seen...The Perfling between the woods on the back is just absolutely stunningly gorgeous,unbelievable craftsmanship!!. I've only seen one other like it. Real difficult to find much info on these rare exotics. A truly Beautiful vintage Japanese acoustic guitar and quite the collectible instrument ...for the person wanting only the best at a fair price...not on sale for $6,000-8000 like the Martin this one is a true bargain Vintage exotic WoW! What a great find. JVG Rated at a solid 8.8/10 very good original Vintage condition. I suggest you get his before she's gone..don't know when I'll find another like it. .
The neck wood is used for the headstock and for the back of the neck (where your thumb rests when playing the instrument). Be careful not to confuse the neck wood with the fretboard wood, as they are separate and different. All our necks are handcrafted from quality tone woods. If you're just starting out, we recommend you choose the wood that appeals to you most based on its appearance, and don't worry too much about how the type of wood affects the sound or performance of the instrument.
History aside, modern-day Ibanez guitars are amazing instruments. They offer a very distinctive value and bang for your buck that is simply hard to match by other manufacturers. Ibanez has become huge in shred (fast lead playing) guitar and metal circles. High profile virtuosos like Joe Satriani, Steve Vai and Paul Gilbert have been greatly responsible for securing Ibanez’s place in super-fast, incredibly technical, shred guitar playing. Not to mention that Ibanez electric guitars simply feel “easy” to play, fast and comfortable. As far as ergonomics and playability, Ibanez guitars are hard to beat. Plus, you can get some very good inexpensive models too. If I where going to call a brand, “the Toyota of the guitar industry,” it would be Ibanez.
Most bass combo amps and bass speaker cabinets are "front-firing"; that is, the speakers and horn, if a horn is present, aim forwards. However, because very low-pitched sounds are omnidirectional, some combos and cabinets have woofers that point down or to the rear. The deep bass tone radiates from the cabinet in all directions, even when it is pointed downward or to the rear. The Acoustic Image combo bass amp has a downward-firing woofer for the deepest pitches, and another forwards-firing speaker for higher-pitched sounds. The vintage Acoustic brand 361 cabinet had a rear-firing 18" woofer, an approach used in a number of home cinema subwoofer cabinets. The rare examples of bass cabinets that use a large folding horn can also use woofers that do not face forward.
Amazing guitar for the price. Honestly plays almost as good as the Paul Reed Smith I used to have. Light weight, great sustain, built in tuner and the pick ups produce a great sound. I was shocked at how good the guitar was... HOWEVER - the amp is total crap. It cracks and pops... my suggestion is to buy the guitar by itself and spend the $100 you save on a real amp (many starters that are superior to this one are the around that price.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: fender","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"fender","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
Packed with over 200 amps, cabs and effects, the Line 6 Spider V 120 is a perfect amp for those who want a wide variety of sounds to choose from. Especially handy for those in cover bands as you can actually dial in famous amp and pedal combinations. It’s also wireless ready via the Line 6 Relay G10 wireless guitar system. No more guitar leads tripping you over while you're rocking out on (or off) stage!

The Telecaster was important in the evolution of country, electric blues, funk, rock and roll, and other forms of popular music. Its solid construction let guitarists play loudly as a lead instrument, with long sustain if desired. It produced less of the uncontrolled, whistling, ‘hard’ feedback (‘microphonic feedback’) that hollowbodied instruments tend to produce at volume (different from the controllable feedback later explored by Pete Townshend and countless other players). Even though the Telecaster is more than half a century old, and more sophisticated designs have appeared since the early 1950s (including Fender’s own Stratocaster), the Telecaster remains in production. There have been numerous variations and modifications, but a model with something close to the original features has always been available.
From guitar faces to the different kinds of axes, here is the Top 10 Greatest Guitar Players. Squeezing the talent that’s blessed our ears for all these years into a list of 10 is just as difficult as choosing which limbs to lose or keep. The list is by no means definitive, but it’s an accurate representation for the uniqueness of the music the guitarist has made. In short, these famous guitar players have played the melodies that have made grown men cry, and probably gave you a taste of how your guitar face would look like pretending to play that solo. Of course many great guitarists may not have made this top 10 list, but feel free to add your own favorites in the comments.
While a little on the pricey side, their products are seen as particularly powerful and reliable overall. The H&K Trilogy is well appreciated for its versatility, allowed by the high level of German technology and engineering involved in its construction.  It has easy MIDI control and three channels, a clean, crutch, and lead, all with boost options that give a lot of freedom to musicians who are into experimenting.

Reverb pedals come with all kinds of different layouts. Even so, some of the controls are virtually universal. The first one we would like to mention is the dry/wet knob. This control is what you use to mix your original signal and the effect itself. When the knob is turned all the way to dry, there will be zero reverb present in the signal. As you move towards wet, the amount of reverb increases.
In this lesson we will study Tennessee Stud as performed by Doc Watson. The tune has a great bluegrass type intro that repeats throughout the song. It applies many of the basic bluegrass principles we have discussed in the Bluegrass Genre section. The chords used are not difficult, however the timing and arrangement are a little tricky. Best to learn a section at a time.

On electric guitars, you do a lot of plugging and unplugging of your cable, and these actions can eventually loosen the output jack, causing a crackling sound through the speaker. This crackling indicates a disconnected ground wire. To fix this problem, you first need to take off the jack plate or pick guard and locate the detached wire causing the problem.
Pyle Pro’s PEGKT15SB package is the next step up. This guitar has more of a vintage feel thanks to its sunburst finish. Like the Silvertone above, it features 3 single coil pickups, two tone knobs, a tremolo bridge system, and a full-scale neck complete with a 22nd fret. Also included in the package is a Pyle Pro gig bag, a small 10-watt amp with cable, 3 guitar picks, a strap, and extra strings.
The Epiphone Joe Pass Emperor II is the signature guitar of one of jazz music’s great guitarists. Joe Pass played on records with Ella Fitzgerald, and his influence has cemented his name among the greats of the genre. The guitar which bears his name is a fine example of a guitar geared precisely towards one genre. It won’t win any awards for versatility, but it is a fantastic instrument for jazz fans of any skill level. Featuring the classic hollow body arch top design of old but with two high quality Burstbucker pickups for a range of silky tones.

I also didn’t mention a tuner, but that’s because a tuner really isn’t an effect. If you use one, the ideal location is in the very front of the signal chain right after the guitar as you don’t want the signal going into the tuner processed by any effects that might affect the tuner’s accuracy. Even better, get a loop switcher with a separate tuner output that keeps the tuner entirely out of the signal chain until you need to use it and that will mute the signal so the audience doesn’t need to suffer while you make adjustments.
For years, Seymour Duncan has provided guitarists with first-rate, handmade pickups and parts that are anything but stock. All of our products are designed and customized to suit the needs of specific musical styles and the musicians thereof. If you’ve got a guitar that doesn’t have a good-quality set of pickups and seems to lack that “extra something” in the tone department, investing in a set of pickups is your first stop.
Hendrix was known for a lot of things.The beautiful chord embellishments on Little Wing, the grit of the solo in Voodoo Child screaming off of his strat pickups, his cover of the Dylan song All Along The Watchtower, and the backwards solo in Castles Made of Sand, but known as a great innovative guitar player over and over again. His short but explosive career influenced numerous artists for many years past his death and continues to influence musicians today. To make such a difference in such a short amount of time truly earns Jimi a spot as number two. But…then you may ask, “Who is deserving of number one?!”

Get it tuned up and play it in the store. Some people may find this uncomfortable, being a newbie and all. If you don't want to play it, just start bending strings, up and down, using the whammy bar; think of it as 'guitar stretching'. Then see how well it stays in tune. If this guitar has no locking nuts on the head, and it still stays in tune, it's a winner. But if you have to re-tune more than a little, and almost all the strings, pass on it. You will grow frustrated by it very quickly.


Dogwood Guitars is a full-service setup and repair shop. We are equipped to handle all of your acoustic and electric guitar adjustment and repair needs. The prices listed below are labor estimates and do not include parts such as new strings, bone blanks, fret wire, etc. I give free no-obligation evaluations of any guitar so that you can make an informed decision about your instrument and its care. Guitars are like cars; they need some routine maintenance to perform at their best.
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.

I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.

Guitars with better-quality electronics can avoid these traits to an extent, but as you can see when you turn the tone pot all the way to zero, the dynamics of the RLC circuit that the pickup and tone circuit create result in a “hump” in the upper bass/low-midrange frequencies, roughly centered (in this example) around 300 Hz. This happens because the low resistance, coupled with the high “capacitive reactance” of the capacitor and the “inductive reactance” of the pickup’s inductor, creates what’s known as a “band-pass filter”, where a specific frequency range in between very low and very high frequencies has the lowest total impedance and thus becomes the most present in the tone.
When this guitar came in the headstock was completely broken off.  Being a 12 string I knew that it would need some extra reinforcement to stay structuraly sound.  I glued the headstock in place and then started to cut away wood from the truss rod to the edge of the neck running from the 5th fret to the A string tuner.  It took hours of cleaning up gluing surfaces and precisely fitting the graft before I could glue it in place.  I then repeated that step on the other side of the neck.  With this repair the only original wood remaing around the break is directly over the truss rods making the finished product basically as strong as a new neck.  Once the neck was refinished you cant even see the original break and only if you look very closely can you see the edges of the grafts.  When the owners of the guitar came to pick it up they thought I had made a whole new neck.  Needless to say they were very excited.  -Evan
Gain – In simple terms, gain is the amount of power your signal is packing. There are a lot of stompboxes that come with gain boosters, which makes it easy to give your volume an instant bump when it’s time for a solo. But be careful of the creep if you add too much gain through too many pedals, or you might end up giving your amp more than it can take, which will throw your distortion out of control.

It is easy to make the mistake that the tone control set-up in an electric guitar is a simple single stage Resistor / Capacitor filter, where the two components are in series, the other side of the capacitor goes to ground, the signal is applied to the other end of the resistor and the output is measured across the capacitor. If that were so then your first calculation is roughly correct, while in a practical situation in the second, the capacitor would be fed from the impedance of the signal source. Lets say this is a test generator with an impedance of 600 ohms – the -3dB cut off would be around 12kHz. This is not the case for the typical electric guitar.
And it took a long time because inevitably the tremolo would go out of time with the track because the tremolo doesn't stay in regular clock time. Also we would go out with each other's amps, so we had to keep looking up at each other after every fifteen second bursts and kind of fess up, "Oh yeah, mine kind of went out of time." It took long time, but I'm glad we did it that way because if we had cut and pasted two seconds of audio, it wouldn't have had the same dynamic quality throughout the six minutes of the song, or however long it is.

Neck-through guitars feature a (usually laminated) neck that, unsurprisingly, extends through the entire length of the body, with ‘wings’ or ‘fins’ glued onto the sides of the body. This gives even more stability to the neck and even more sustain and resonance when played. Neck repairs are, again more difficult and costly. However, the increase in stability means these repairs are much less likely to be needed.


If a player uses a separate preamplifier and power amplifier, she or he can buy a power amplifier intended for a sound reinforcement system or PA system or pick a power amplifier designed specifically for bass instruments. These preamps and power amps come in two formats: 19 inch rack-mountable units and units with their own wood or metal case. If a player uses a rackmountable preamp and power amp, these units and any effect units, such as an audio compressors, can be mounted in 19" rack mount road cases for safe transport. When a bass player selects a variety of different preamps, effects units and a power amp and puts them all in a rackmount case, this setup is colloquially called a "bass rig". Amp heads with their own wood or metal case may use many of the same appearance and transportation-oriented design features used on combo amps. For example, if a bass amp head is designed with a wooden case, it will typically have a vinyl, felt or sturdy fabric (or painted coating) to protect the wood case during transport; a carry handle; and corner protectors.

A range of other effects are used in various genres. "Wah-wah" and "synth" bass effects are associated with funk music. As well, since the 1960s and 1970s, bands have experimented with "fuzz bass" where the bass is distorted either by overdriving the amp or by using a distortion unit. Fuzz bass was used by psychedelic rock bands in the 1960s and early 1970s and in traditional heavy metal bands (Led Zeppelin) during the same era. Octave-generating effects, which generate an octave below the pitch being played are also used by bass players. Many bassists in modern-day hard rock and heavy metal bands use overdrive pedals specifically made for bass guitar. Since the late 1980s, bass-specific overdrive pedals have been available; these pedals maintain the low fundamental pitch. Using a regular guitar distortion pedal for bass would result in the lower frequencies being greatly lessened. Well-known overdrive effects for bass include the BOSS ODB-3 Bass Overdrive[1], Electro-Harmonix Bass Blogger[2], Tech21 Sansamp Bass Driver[3][4], the DigiTech|DigiTech XBD Bass Driver [5], and the Electro-Harmonix Big Muff.
Guitar cables (or jack leads as they are sometimes called) are a relatively inexpensive part of any setup compared to the instruments themselves, but as the link between your guitar and amp or recording interface, they are a crucial component. A frayed, broken or otherwise imperfect cable will introduce crackle, buzz and other nasties into your signal chain. Even a bunch of distortion pedals may not disguise it. Before recording, make sure your cables are in good order. If not - replace them!
The LP-100 is among the most affordable, but also the most popular Epiphone models. It is the quintessential beginner guitar. Epiphone Les Paul-100 brings you that classic aesthetic in a package that is affordable and capable of sounding rather great. While it’s not something you’d want to do a world tour with, this Epiphone is perfect for beginners and intermediate players.

The Hoshino Gakki company began in 1908 as the musical instrument sales division of the Hoshino Shoten, a bookstore company. The Ibanez brand name dates back to 1929 when Hoshino Gakki began importing Salvador Ibáñez é Hijos guitars from Spain.[1] In 1933 The Salvador Ibáñez é Hijos cy. was bought by Telesforo Julve and incorporated in his enterprise. Hoshino Gakki started making Spanish acoustic guitars from 1935, at first using the "Ibanez Salvador" name, and then later using the "Ibanez" brand name [2].
Use songs as vehicles, certainly, and have fun playing them, by yourself, with friends, but get to realise that knowing what one chord sounds like after another will help you to play a new song almost spontaneously - a great trick to impress. Just learning songs will not give you much of a clue how music actually works, so you're better off using them to help learn music. obviously, you'll learn some songs to play along to, or with mates, but that's not the be-all and end-all. And it's not only the chords: learn pentatonics and you'll realise how many great guitarists use them in solos. Gilmour, Clapton, etc. Sunshine of your Love is pure blues scale notes!
Great sounding pedal reasonably easy to assemble. First, if you havent much experience, take the time to study up on PCB's, it's not step by step. If you have trouble reading the resistors there are apps that tell you the values by scrolling through the band colors. My only problem was wiring the jack outlets because the print isn't that great in that area. 2 or 3 components didn't match the PCB's labeling but I looked at the product's pic and figured it out. It took about 3 1/2 hrs with eating dinner in there somewhere. Now some friends want me to make them one also! 4 stars because of the jack outlet picture and no green wire
when FINALLY picking up he was running down the stairs leaving early, i barely caught him so didn't get a chance to play it before taking it home, or would have had a chance to address this disappointment. there were dead frets all over the high strings. he clearly didn't perform the service that i paid for. a year later that vintage les paul is still in the same unplayable condition and needs a full service by a real luthier.  

Clarence Leonidas “Leo” Fender was established this brand in 1946. The Fender Musical Instruments Corporation (FMIC) manufactures the stringed instruments and amplifiers, such as solid-body electric guitars, including the Stratocaster and the Telecaster. This brand is the kings of hearts and getting the popularity from blues to quick rock tempo. Fender’s Precision and Jazz Bass models are now considered to be the standard to which most other electric bass guitars are measured. It’s famous for best guitars which are made ever in the history.
Power-tube distortion is required for amp sounds in some genres. In a standard master-volume guitar amp, as the amp's final or master volume is increased beyond the full power of the amplifier, power tube distortion is produced. The "power soak" approach places the attenuation between the power tubes and the guitar speaker. In the re-amped or "dummy load" approach, the tube power amp drives a mostly resistive dummy load while an additional low power amp drives the guitar speaker. In the isolation box approach, the guitar amplifier is used with a guitar speaker in a separate cabinet. A soundproofed isolation cabinet, isolation box, isolation booth, or isolation room can be used.


We’re bookending this article with two Epiphone guitars. Why? Because Les Paul was the man. And G-400 Pro was actually a successor Les Paul model from ’61 to ’68, making this guitar a true icon of rock, power, and endless sustain. With a mahogany neck and rosewood fretboard, this guitar has the looks and, with Alnico Classic Pro humbucking pickups, the tonal quality is excellent. 


But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
PONTE NON TREMOLO Per cambiare le corde, infilare le corde nuove negli occhielli di guida sul retro della chitarra e posizionarle in seguito sopra la selletta. È possibile regolare l'intonazione spostando la selletta in avanti o indietro utilizzando un cacciavite a testa Phillips (+) sulla vite di regolazione dell'intonazione nella parte posteriore del ponte.

Aside from what brands to choose from and finding out the right budget to spend on an amp. Initial search for a guitar amplifier generally leads beginner players on figuring out that there are actually different types of guitar amps in the market. This is where they start to care deeply enough to know which amp sounds better and what will fit their playing the best.
The specs for this stripped-back Singlecut are identical to PRS's gloss Standards; the difference is in the paint - or, rather, the lack of it. Instead of that faster S2 gloss, here we have a nitrocellulose satin finish that doesn't bother with grain filler - you can easily see the body wood's grain and feel it on the neck - for a thinner finish, which will wear and age the harder you play it. Plus, thin finishes don't choke any vibrations or resonance. Along with the dot-only fingerboard inlays, this Satin Singlecut looks very workmanlike, but the build and parts still deliver the goods. The body is one-piece mahogany, the neck three-piece. The bridge is the USA Stoptail, the locking tuners, like the pickups, made in Korea to PRS specs. The pattern regular neck is a nice mainstream handful, and setup and intonation are, as ever, top-drawer. Mahogany guitars can be dark-sounding and here, yes, there's a throaty midrange focus, but a clean-edged ring and resonance that provides clarity and punch, much like the pickups that nail an almost P-90-ish sizzle and classic-rock poke. The four-control layout means there's plenty of adjustment, and the coil-splits on the tone controls add authentic single-coil cut. Clean, low, medium or high-gain, this one's a banker: the most rock-out, resonant blue-collar PRS we've ever played, and that's why it's one of the best electric guitars, especially at this price point.

5) BE KIND AND CONSIDERATE! /r/Guitar is a melting pot of people from different backgrounds and skill levels. Everyone is entitled to their own opinion. If you do not agree with something someone else said, please either have a polite discussion or do not comment at all. Remember that everyone is a beginner at some point. Any inflammatory, disrespectful, and/or hateful comments or usernames will result in a ban. We have a zero-tolerance policy regarding such comments/posts. Sub/mod bashing is not productive and will be met with a ban. Contact mods if you have a complaint. Please report any comments or posts violating these rules.

So Rad...It's ok...To think that we were going to get all the campaigns and multiplayer for all the Halo's was amazing, and the game itself when it works is amazing just like it always has been, but I bought my Xbox One just for this game and the fact that it was broken for more than half a year is a shame and honestly unfair to the consumer, I still give it 3 stars since it works decently now but it lost its potential to be an amazing game....Lots of people seem to be having issues with multiplayer and campaign achievements; however, I have not noticed any campaign issues other than one time when I accessed a terminal it would not let me resume my game but after a restart I found I had just hit a checkpoint so no work was lost.
This body and headstock shape are identical to my Nivico Balladeer, and both guitars are real keepers.  This truss rod cover would become the standard curved plastic type seen on many Matsumoku-made guitars for the next 10 years.  Of course the Palmer badge is missing, but the Palmer name (as it pertains to Japanese imports) was being used as early as 1964.  I’ve seen Kawai S80s badged with the Palmer name.  If you do a search for vintage Palmer guitars, you’ll come up with all sorts of hits but you probably won’t see too many guitars like this one.  These were probably made for one or two years, and I’d bet the pickups were sourced from local Matsumoto.
Nickel trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
The Little Lady is very similar to the 38C, but on a pearwood comb and with different cover plate art. It is technically a playable harmonica, but it is generally regarded as a knick-knack piece that can be used as personal jewelry. It is also available as a keychain. The Little Lady holds the distinction of being the first musical instrument to be played in outer space.[30][31]

Jazz guitarists need to learn about a range of different chords, including major 7th, major 6th, minor 7th, minor/major 7th, dominant 7th, diminished, half-diminished, and augmented chords. As well, they need to learn about chord transformations (e.g., altered chords, such as "alt dominant chords" described above), chord substitutions, and re-harmonization techniques. Some jazz guitarists use their knowledge of jazz scales and chords to provide a walking bass-style accompaniment.
Mic orientation, or the angle of the mic in relation to the speaker, becomes more critical as the mic is moved closer to the amp. Pointing the mic at the center of the cone will yield more active highs and better transient detail but fewer lows. As you move the mic toward the outer rim of the speaker, maintaining a 90-degree angle with the grille cloth, the low frequencies gradually increase because of proximity effect and other factors, resulting in a sound that may be warmer, softer, or more powerful. Many engineers like to blend these complex characteristics by angling the mic between 30 and 60 degrees off-axis from the center of the speaker.
Paul has been great to work with, he's flexible, and knowledgeable on what works best for our son. Plus our lessons are in the comfort of our home! He always communicates with us on how our son is doing and if he needs to practice more, so he can show improvement on learning notes. Paul also purchased a bass guitar so he can work with our son on learning the bass as well. I also asked if he can help us shop and pick out a reasonable amp and he agreed to help out and suggested a few places to shop at. Working with Paul has made this experience easy as I was worried of finding a good fit for our son. I would recommend Paul to anyone and you can't beat his rate!

 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
{ "name": "Belmont Blue", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Belmont-Blue-1500000152096.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "12-03-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152096", "shipToStore": true, "displaySku": "K47863000003000", "displayId": "1500000152096   POS #: 113861058", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000003000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.guitarcenter.com/is/image/MMGS7/California-Redondo-Player-Acoustic-Electric-Guitar-Belmont-Blue/K47863000003000-00-140x140.jpg", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Belmont Blue", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }

Nickel ES-335 diamond trapeze tailpiece. This is a short version of the standard ES-335 style tailpiece which was also used on many arched top instruments. Overall length of Tailpiece not including hinge = 3 1/8 inches. Side to Side width at bar = 3 9/32 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Certainly low action makes a guitar easier to play, and for some styles it really is a necessity. What I would like to address here, though, are the high incidences of guitarists who perpetually chase “the perfect tone”, while continually focusing on string height purely as a function of playing feel, rather than as a factor of tone, which it most certainly is. The old set-up rule that you “get your strings as low as you can without buzzing” seems to make perfect sense. Set up to that criteria, however, while your strings might not buzz noticeably, their vibrational arc is more than likely still inhibited by the proximity of the frets. Also, play harder than usual — which, if you’re like me, you will often find yourself doing in live situations, even if you’re not aware of it — and that set up does also lead to a little unwanted buzzing, though your amp settings, the energy of the live gig, and any effects in the chain might help to mask it.
Since they present a finer break point at the neck end of the strings’ speaking length, narrower vintage-gauge frets are generally more precise in their noting accuracy. From this, you tend to get a sharper tone, possibly with increased intonation accuracy, plus enhanced overtone clarity in some cases, which could be heard as a little more “shimmer.” If you’re thinking these are all characteristics of the classic Fender sound, you’d be right—or they are, at least, until you change those vintage frets to jumbo.
I have been using a Belcat tube 50R guitar amp. I've owned all the top amps,Fender, Marshall,Mesa,Peavey. This Belcat amp,with pedals, is one of the best sounds I've ever gotten. It's not heavy like a twin,and the clean sound is great, although it's hard to beat a Fender Super reverb,or a twin for pure tone,but I don't like how Fenders sound with distortion pedals. I have a Marshall Combo and a Blackstar HT Club 40,love them both,but I've been using the Belcat. It's distortion,on it's own,is a blues type, not heavy, but with a Rat it screams, or a Boss Blues driver,or Ibanez Tube Screamer,you can get just the sound you're looking for. Too bad they're not making them anymore, it's really a good amp!
The Gruhn Guitars repair shop has been world renowned for decades for its unrivaled expertise, skill, and respectful repair practices. Though our full-time staff of luthiers primarily focuses on repairing and restoring the instruments we make available for sale, beginning in 2016 we are also pleased to offer our repair services to loyal customers as an extended benefit of buying an instrument from Gruhn Guitars. Instruments purchased from Gruhn Guitars will be moved to the front of our repair queue and will be repaired at a discounted labor rate. As a sign of our appreciation for your business, Gruhn Guitars is here to help you for years to come to keep your instrument in the same prime working order as when it was listed for sale at the shop.
Sawtooth ST-ES Carc is another affordable electric guitar that both beginners and intermediate players can use for practising their skills. It comes with a sycamore body with a black finish and has a pickguard or vanilla cream color. It comes with almost all the accessories needed - tuner, amp, picks, cables and basic online lessons too. You also get a gig bag with it which very few guitars give you and normally you have to buy it separately.
When you are also tracking a close mic at the same time, you might try variations of the approaches discussed in the sections above on distant-miking or ambient-miking to get a little or a lot more room sound into the brew. This often will capture the best overall sound for a range of musical styles – the close mic delivers punch and plenty of midrange grind (depending on mic choice), while the distant mic – placed from about 12″ away to several feet – adds depth, dimension, and the natural reverberation of the space. After careful consideration for both mic placements (using the “position, listen, re-position” techniques discussed above to find ideal on-the-track sound from each mic), some skill in the mixing process is also often required to make the most of any multi-mic setup. The discussion about phase alignment in the sidebar (“Correcting Phase Issues”) is often a big part of this post-tracking approach to maximizing multi-mic techniques, but also be aware that you can use whatever proportional blend of the two tracks works best, a variety of effects and dynamic treatments on each track, and whatever panning of the pair best suits your overall mix, from dead-on together to any different pan of each within the stereo field.
Echo (also sometimes called long delay) is a natural effect as well, but it is only encountered in large open spaces such as canyons or stadiums. It sounds like when you emit a loud, sharp yelp and a second later you hear the yelp come bouncing faintly back to you from a far wall. This is a particularly fun effect to play around with by yourself. If you set the delay of the echo long enough, you can play against the notes you just played and harmonize with yourself while the rate sets up a kind of beat.
The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
Welcome to OvationGallery.com.  This is my personal website for displaying photos of my various Ovation guitars.  I have been a player and collector of these fine instruments for over 30 years.  Although I don't profess to be an expert on all things Ovation, I do have a passion for their artistic and sonic beauty which I hope you will share.  My collection is always evolving, at one point  numbering over 50 guitars.  At one time or another I've been lucky enough to own almost every type of Ovation and Adamas guitar as well as some one-of-a-kind and truly collectable specimens.  All of these guitars are wonderful and it is my pleasure to share them with you on this website.     Dave   
An Octaver is a cool little effect that will tune your original sound several octaves up or down in pitch. This effect can give you the ability to fill up the bass frequencies with your guitar. You can often see Jack White using this effect when he plays live with only one other drummer. He will turn on his octaver at certain points of the song to play bass lines.

Re-amping is another increasingly common production technique, often used at the mixdown stage. This process involves a dedicated re-amping device, which takes a line-level feed from a mixing console or DAW interface and converts that signal's level and impedance to one that a guitar amplifier is able to accept. That signal is usually a separate "dry" (unamplified and unprocessed) guitar track recorded using an active 500kOhm direct box placed between the guitar and the amp.

We have done hundreds of guitar 'set-ups' / repairs / restorations over the years and know how to do them to a degree that 95% of 'players' will be very satisfied. We're not just changing strings and polishing. We'll check and adjust the neck for correct string height at the 7th fret (should typically be about the thickness of a .010 gauge 'E' string when fretted at the first fret and the 12th fret). We also check for a 'body bump' in the neck as if that can't be addressed to a 'playable' degree, then the balance of the adjustments will be for naught. As we're in a very dry climate, we will check for 'fret overhang' due to neck shrinkage and 're-dress' the frets accordingly. If it's a 'bolt-on' neck, we'll check for neck joint / screw integrity and repair as necessary. We check and adjust for correct intonation using our 'Peterson' strobe tuner and our other 'analog' tuner. Electrics are typically intonated with 'fresh', .010 strings installed (if you want it intonated with a different gauge, just let us know). We inspect and test the electronics, especially looking for any 'aftermarket' re-wiring / mods / incorrect repairs. We inspect the integrity of the tuning machines and repair as necessary. Of course we do all the standard cleaning, adjusting and test playing once the 'basic integrity' of the instrument has been addressed.
{ "thumbImageID": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst/J73165000002000", "defaultDisplayName": "Squier Strat Pack SSS Electric Guitar with Fender Frontman 10G Combo Amplifier", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Brown Sunburst", "sku": "sku:site51500000053102", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "349.99", "priceVisibility": "1", "skuUrl": "/Squier/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst-1500000053102.gc", "skuImageId": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst/J73165000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Brown-Sunburst/J73165000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000053101", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "349.99", "priceVisibility": "1", "skuUrl": "/Squier/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Black-1500000053101.gc", "skuImageId": "Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Black/J73165000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Strat-Pack-SSS-Electric-Guitar-with-Fender-Frontman-10G-Combo-Amplifier-Black/J73165000001000-00-60x60.jpg", "imgAlt": "" } ] }
{ "thumbImageID": "MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Walnut-Stain/J37214000001000", "defaultDisplayName": "Mitchell MD300 Modern Rock Double Cutaway Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Walnut Stain", "sku": "sku:site51500000010523", "price": "199.99", "regularPrice": "299.99", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Walnut-Stain-1500000010523.gc", "skuImageId": "MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Walnut-Stain/J37214000001000", "brandName": "Mitchell", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Walnut-Stain/J37214000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Blood Red", "sku": "sku:site51500000010525", "price": "149.97", "regularPrice": "149.97", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Blood-Red-1500000010525.gc", "skuImageId": "MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Blood-Red/J37214000003000", "brandName": "Mitchell", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Blood-Red/J37214000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000010524", "price": "199.97", "regularPrice": "199.97", "msrpPrice": "449.99", "priceVisibility": "1", "skuUrl": "/Mitchell/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Black-1500000010524.gc", "skuImageId": "MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Black/J37214000002000", "brandName": "Mitchell", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/MD300-Modern-Rock-Double-Cutaway-Electric-Guitar-Black/J37214000002000-00-60x60.jpg", "imgAlt": "" } ] }
Here's a cool tip: If you ever needed to compare sizes between two items, say tuner shafts and a drill bit, but don't have a micrometer, try this. Use a crescent wrench! adjust the jaws to fit the first item, and then see how the other piece fits! Also great for taking measurements of something round. Fit the wrench to the object, and then lay the tool on a ruler and measure the gap. It's much more accurate!

Vox entered the "lunchbox" amp market in 2009 when it introduced the Night Train (NT15H) head. This compact, all valve amp is a 15W head with two 12AX7 preamp tubes, a pair of push-pull EL-84 valves in its power section, and a solid state rectifier. It uses a cathodyne splitter, and its power section is cathode biased. The amp is solidly constructed on a black steel chassis with a bright mirror chrome finish, diamond-perforated steel tube cage, giving it a physical appearance reminiscent of a lunchbox (some comparisons to a toaster have been made as well). The NT15H also set the cosmetic and operational template for two additional releases, also all valve heads, that book-ended its output power: the 2W Lil Night Train (NT2H) in 2010, which uses two 12AX7 preamp tubes and a 12AU7 dual triode as its power section, and the 50W Night Train 50 (NT50H) in 2011, a two channel head with four 12AX7 preamp tubes and a pair of EL-34 valves in its power section. All models feature the ability to choose between the familiar "chimey" Vox voice and a high gain voice that bypasses the EQ section, via the Bright/Thick switch. Note though that each Night Train model's feature set also provides some unique capability apart from its siblings. For example, the NT15H output power can be switched between 15W pentode and 7.5W triode modes. The NT2H provides a headphone/line out jack with on-board speaker emulation (for practice or direct recording use). Lastly, the NT50H offers two channels by adding a second,optionally foot-switchable, higher gain "Girth" channel, a "Tone Cut" control and a "Tight" switch in its master section, plus a bypassable, JFET-driven effects loop. All models were designed for use with most any 8 ohm or 16 ohm cabinet, although Vox also offers a matching cabinet (NT15H/V112NT, NT2H/V110NT, NT50H/V212NT) for each model.

{"id": "L20582", "categoryId":"site5AAG", "name":"Slash Firebird Limited-Edition Electric Guitar", "pageUrl":"/Epiphone/Slash-Firebird-Limited-Edition-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/Slash-Firebird-Limited-Edition-Electric-Guitar-Trans-Black/L20582000001000-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"899.00", "priceMin":"899.00", "priceMax":"899.00", "msrp":"1,499.00", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Epiphone", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "Top Seller", "isVintage": "0", "outletonly": "0", "checksum":"565047124900", "priceVisibility": "1", "itemType": "New"}
There is a legitimate physical aspect to the gauge of your strings that will affect how well you play.  Bending and fretting becomes much easier and faster with a lighter set, but in my own experience you will have a “tinnier” tone that must be compensated for with your guitar and amp tone controls.  Speaking of tone, lets look at how string gauge affects the sound you produce.
It has a sensitivity of 96 dB, just two units short of the M50x’s 98, but the maximum input power is less than half of that model’s, at 700 mW. The impedance is somewhat higher at 47 W vs. the M50’s 38 W. Besides the price, another identifiable upside would be the lower weight, of 6.7 oz, a feature that won’t be easy to discard after spending the whole day with the headphones on.
Fender’s arm when it comes to affordable quality guitars is the Squier. The Affinity Stratocaster is no push over. It has an ergonomically design contoured double cutaway body made of alder and has the C-shape all maple or with rosewood fingerboard neck patterned over an original Fender which contributes greatly to the guitars comfort and playabilty.
Les Pauls are all about that heavy metal feel and heavy weight. When they were first introduced, they had two p-90 single coil pickups. Today, they use double humbucker pickups for outputting a thick, sustainable sound. Like Tele and Stratocasters, they have a single cutaway shape. Heavy rock musicians love Les Pauls. Fender offers an affordable range of Les Paul electric guitars compared to Gibson, but Epiphone by Gibson is a hot item for the beginners.
The first two letters of these names indicate the number of poles, while the last two letters are the number of throws. So a SPST (aka 1PST or 1P1T) means single-pole/single-throw, a SPDT (1PDT or 1P2T) means single-pole/double-throw, and DPDT (2PDT or 2P2T) means double-pole/double-throw. There are many more configurations, including 3PDT devices used for true-bypass switching in effects, and Fender’s 4PDT S-1 switch. Found on push/pull or push/push pots, the DPDT on/on switch is by far the most common, and mini toggles are available in an endless number of variations.
At the higher end of the market, you will definitely want to consider theGibson Memphis ES Les Paul Studio. A stunning marriage of the ES hollowbody and Les Paul solidbody shapes, this is a model that combines playability, power, sustain and tonal warmth to perfection. Equipped with ’57 Classic and Super ’57 Classic pickups and boasting solid construction throughout, the ES-Les Paul Studio is perfect for anything and everything you could imagine. Each model is supplied with a Gibson Memphis hardshell case to get you out and about in style.
The SG Special by Epiphone is our hands down top pick. As you'll know by know, Epiphone is one of the best guitar manufactures in the business – so the quality of this guitar is absolutely amazing. Its epic red devilish double-cutaway design gives easy access to all 22 frets. It has a hard maple neck and a slim taper D-profile which ensures durability and rigidity. The fretboard is made of rosewood which makes it easy to learn to play. This guitar is all about that rock sound - it's equipped with two open-coil and noise-free humbucker pickups. The hardware is carved from nickel and is available in two dazzling finishes, cherry, and ebony.

After I published that blog post, a number of beginners wrote to tell me they had a higher budget and would actually like me to recommend some better beginner guitars than those you typically find in starter packs. When I dug deeper, most told me they had a max budget of about $300 for the guitar alone, and weren’t interested in all-in-one starter packs. They wanted a really great (but affordable) guitar and wanted to shop for amps and accessories separately. I further confirmed this with a little informal poll on Twitter:
PRS McCarty 594 Electric Guitar The PRS McCarty 594 is a vintage-inspired electric guitar with plenty of premium appointments such as a . It’s part of the Core Electric Series, the company’s lineup of high-end guitars. This means that the McCarty 594 has all the bells and whistles you can expect from a premium instrument. For pro musicians, this is an investment worth every penny.
Being one of the reputed organizations, operating in this domain, we are engaged in manufacturing and supplying a quality range of Gigmaker Electric Guitar. We only use high grade components and latest technology while designing these guitars. The offered range is widely appreciated all over the nation for its salient attributes. With our quality range, we
A younger, but very high-quality brand that's also a favorite among country artists, Taylor manufactures some truly investment-worthy acoustic guitars—with a sound that only improves over time. Its creator, Bob Taylor, tested the use of exotic tonewoods in excellent guitars, so he used oak recovered from pallet wood to craft the back, sides, and neck of the Pallet Guitar, an important model originally made in 1995. Taylor's roster of tonewoods also includes Indian Rosewood, African Ebony, Blackheart Sassafras, Blackwood, Cocobolo, Figured Walnut, Granadillo, Hawaiian Koa, Maple, Ovangkol, Sapele, Tropical Mahogany, and several others.
It's like saying the wood handle of a hammer effects the tone generated by hitting a nail. The nails been hit, vibrations through the wood afterward are pointless. Unless the guitar itself is metal and hollow, you would hear sound generated acoustically, as you would with any acoustic instrument. An electric guitar is not an acoustic instrument in a classical sense.
In the world of amplifiers, there are amp stacks and combo amps. For beginners, a combo amp is usually the way to go, since they combine the amp circuitry and the speaker together into one unit. Check out models like the Marshall MG Series MG30CFX 30W 1x10 Guitar Combo Amp and the Fender RUMBLE 25 1x8 25 W Bass Combo Amp for a few examples of this type. For the biggest professional setups, on the other hand, a combo amp may not be quite beefy enough. That's where stacks come in, based on a head (such as the Peavey 6505+ 120W Guitar Amp Head) paired up with a speaker cabinet. You can even find some pre-made amp stacks here, like the Line 6 Spider IV HD150 150W and 4x12 Guitar Half Stack, to save you the legwork of shopping for both parts separately.
I've gone into a fair bit of detail here, which may be baffling to some, or may be old news to others, but I hope it cleared some of the common misconceptions about certain parts transforming tone that I have discovered in my time doing this! Truth is, upgrading your wiring is a really worthwhile modification to carry out. Replacing parts with quality components, of reliable build quality and accurate tolerances and ratings will simply be the best for your guitar. You may well see a tonal improvement afterwards which each customer of mine has reported back after fitting one of our harnesses, which is lovely to hear. But approach with the right facts, approach without the mystique of 'this vintage style pot will transform my tone' and you'll be pleasantly surprised I'm sure! There's no magic to a responsive, great guitar tone. 
Now, if you're just getting started and breaking strings every time you try to tune up because you hit the wrong octave, then start out with the cheapest strings.  Once you can reliably tune and play without destroying them, you can work you way up.  Once you have the hand coordination, your learning will be accelerated too.  The right tool for the right job, as Old Grandpappy always used to say.  The best electric guitar available will be garbage with the worst strings on the market.  Choose wisely!
Plays like a Fender, sounds like a Gibson! Absolutely amazing and incredibly versatile guitar. The pickups are really impressive, the playability is second to none. I sold my first G&L, I'll never live down the regret, so I bought another one. I haven't played a PRS yet, but I own a Fender Strat and a Gibson Les Paul, Schecter and an ESP Eclipse, but it's my that G&L gets the most play time!
In the eighties, the Sonic Youth leader emerged as indie ­rock's premier guitar radical, mixing strange drone tunings, jamming screwdrivers or drumsticks under his strings, and blasting out feedback-swirled punk jams. Thurston Moore influenced a generation of noise­heads, from grunge rockers to shoegazers. Neil Young once said that if Sonic Youth wanted to record with him, "Hell, I'd be there."

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red
After music fans heard his impressive blues rock playing on John Mayall’s ‘Beano’ album, they began to spray paint “Clapton is God” on London, England infrastructure. It’s safe to say that Clapton left quite an impression on people. His playing with Cream, Derek and the Dominos, and Blind Faith as well as in his solo work only helped to strengthen Clapton’s legend.
Offers include 20% British VAT and are valid as long as stocks last. Shipping costs to the U.K. are 10 EUR (approx. £7), free shipping on orders above 149 EUR. Please click here for international Shipping Costs and Delivery Times. We do not accept liability for typographical errors or inaccurate information of any kind. *RRP = manufacturer's / distributor's recommended retail price in Germany
The auctions continue on our eBay store, including last remaining production samples of several models, and other unique instruments, including made in Japan JP models, Triturador basses, Tony Campos Signature Tremor basses, acoustic guitars and accessories. Check out the current listings, there will be new items posted every week: http://bit.ly/1caL5ah
If you've ever seen an electric guitar, you'll have noticed that most of them have solid bodies that are thinner (and sometimes much smaller) than those of acoustic guitars. Although most electric guitars are wooden, the material from which they're made is not critical. As George Beauchamp (pioneer of the modern electric guitar) pointed out in his patent back in the 1930s: "The body may be varied considerably in size, shape and construction, and may be constructed of various materials without departing from the spirit of the invention"; his original design suggested the body could be made from "a simple integral casting of metal such as aluminum." Early electric guitars were made from all kinds of materials, including molded Bakelite (one of the first plastics) and sheets of soldered brass.
The Hi Flyer guitar and bass would be offered pretty much until the end, in ’77. At some point after, probably around ’73 or ’74, the plastic logo was changed to an outline decal logo. Also, at some point the pickups were changed to the distinctive twin-coil humbuckers with metal sides and a see-through pink insert on top. These changes most certainly occurred by the ’76 catalog, when the Hi Flyers were available in four finishes – sunburst (U1815, U1815B), white (U1816, U1816B), black (U1817, U1817B) and a cool natural with maple fingerboard and black dots (U1818, U1818B).
When consulting our buying guide, the first thing you need to think about is your budget. How much can you afford to spend? Generally speaking, musical instruments tend to get better the more expensive they get, although this is of course not always the case. And even if you would buy a really expensive guitar you might not be experienced enough to notice how good it is.
There aren’t really any structured lessons—like, where you’re starting at the beginning and working your way sequentially through—you have to browse through the playlists and find what’s best, but the quality of the lessons and wide variety of topics will have everything covered. JamPlay is a sampler for the website, where you’re offered a subscription service to complete courses, which explains the kind of shotgun approach to the videos made available on YouTube. But the size and breadth of the topics you can access for free still makes it a great channel.
Subsequent years brought new company ownership to the Gibson Guitar Company. During the “Norlin Era“, Gibson Les Paul body designs were greatly altered, most notably, the change to the neck volute. Because the Les Paul had the reputation of having an easily broken neck joint, the volute strengthened the neck where it joined the headstock to avert breakage. To further increase the strength, the neck woods were changed from mahogany to a three-piece maple design. The LP body was changed from a one-piece mahogany with a maple top into multiple slabs of mahogany with multiple pieced maple tops. This is referred to as “multipiece” construction, and sometimes incorrectly referred to as a “pancake” body. The expression “pancake body” actually refers to a body made of a thin layer of maple sandwiched between two slabs of mahogany, with a maple cap. The grain of the maple was placed at 90 degrees to that of the mahogany. The “pancake”-like layers are clearly visible when looking at the edge of the guitar. This process is also known as “crossbanding”, and was done for strength and resistance to cupping/warping. Crossbanding was phased out by 1977.
PRS recently started using quite an old idea (first suggested to us by guitar/amp technician Brinsley Schwarz). You simply add, in series, a resistor between the pickup ‘tap’ wire and ground. This mod, “doesn’t completely cancel the slug coil,” explains Smith, “it sort of three-quarters coil cancels. It allows some of the other [slug] coil through. It’s also slightly hum- cancelling.”
The Teisco TG-54 was a two-pickup Les Paul, named for the year it was designed, 1954, not long after the original! It had a large white plastic covered pickup at the neck, set into the pickguard, and a slanted metal-covered pickup set into a metal tailpiece assembly, sort of like a Telecaster. Again, strings passed through the tail assembly and the body. Similar to the J-1, the volume and tone controls (same knobs) sat on a small rectangular plate, this time metal like a Tele, with an added chicken-beak three-way rotary selector switch.
So there you have it. An absolute workhorse with fantastic sounds, and just about a must-have pedal no matter what type of guitarist you are and no matter your skill level. Equally a perfect first pedal to buy as it is a perfect last pedal in your collection. The biggest downside is that it probably can’t be your only pedal, since you can only use one effect at the same time. Famous users include Russel Lissack of Bloc Party, James Edward Bagshaw of Temples, and Dave Knudson of Minus the Bear. At the “too good to be true” price that it sells for (seriously, we’re not just saying that, one of our writers immediately sold his DL4 and bought the M5), this is without a doubt the Best Bang for your Buck.
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.

For me, the hardest part of mixing is getting the vocals to sit properly. There are a lot of tricks you can apply that can help, but I think one of the most useful is to send the vocal to a bus and insert a compressor there, with a high ratio of around 10:1 or more. Set a low threshold, and a medium attack and release, then, in the next slot, load a distortion plug-in with a warmish sound. Use high- and low-pass filters, set to around 100Hz and 5KHz respectively, and mix a small amount back in alongside the lead vocals. You don't need to add much — it should be almost 'subliminal' — but it can really help to fit the vocal in the track. Nicholas Rowland
What's so special about the Epiphone Les Paul Special II Electric Guitar? The super-low price for starters and that's not all. It gives you all the essential elements of a Les Paul. Made with a mahogany body, bolt-on mahogany neck, smooth 22-fret rosewood fingerboard, this baby is every bit as handsome as its uptown cousins. Features 700T/650R open-coil humbucking pickups that deliver long, singing sustain and true Les Paul tones. The LockTone Tune-O-Matic bridge and stopbar tailpiece add more sustain and make string changing easier. Limited lifetime warranty. Strings: D'Addario; 10, 13, 17, 26, 36, 46
This beast features a classic Sitka spruce top with a rosewood back and sides combo. We have already mentioned a few guitars that feature these types of tonewood. However, the difference here is that the Martin DCPA4R is a handmade instrument that brings you the craftsmanship of Martin's top luthiers. If you appreciate craftsmanship, you'll love this instrument.
Full hollow-body guitars have large, deep bodies made of glued-together sheets, or "plates", of wood. They can often be played at the same volume as an acoustic guitar and therefore can be used unplugged at intimate gigs. They qualify as electric guitars inasmuch as they have fitted pickups. Historically, archtop guitars with retrofitted pickups were among the very earliest electric guitars. The instrument originated during the Jazz Age, in the 1920s and 1930s, and are still considered the classic jazz guitar (nicknamed "jazzbox"). Like semi-acoustic guitars, they often have f-shaped sound holes.
×