The first step is to remove all the electronics from your guitar. This includes the potentiometers (volume and tone knobs), the switch, the pickups, and the jack. For most Fender style guitars, most of the electronics listed are mounted on the pick guard with the exception of the jack which usually has its own plate it resides on. For Gibson style guitars, the pickups are removed from the front and the rest of the electronics through the back. 
The ’37 Spanish Guitar ($40, $5 for a case) illustrated in both the Sorkin and Grossman catalogs was basically the same as before, but now with plastic button tuners. This still had no f-holes. The previous basic Regal trapeze tail is now shown replaced by a stamped National trapeze. Indeed, despite the fact that catalog illustrations remain retouched versions of the old Regal-made guitars, these probably had Kay bodies and bolted-on National Dobro necks. Gone is the 1/4″ jack in favor of the screw-on microphone attachment. Finally, the new cylindrical-magnet pickup is offered as the “Mated Pick-Up.” This is significant both intrinsically and in light of later Supro features. This pickup is “mated,” i.e., attached by three screws, to the bridge saddle. The pickup sat inside the guitar contained in a wooden box. This was the beginning of National Dobro/Valco’s association with what would later be called the Bridge-Tone under-bridge pickup featured in many of its electric guitars.

SSO Strings (Sonatina Symphonic Orchestra) is a creative commons licensed library. For violin, chamber strings and flute I have taken several of the instrument samples and layered them together to allow for expressive playing over the velocity range. Flute SSO for example contains soft, hard and overblown samples from SSO. To create chamber strings I have used bass strings, cello, expressive violin and viola over certain ranges of the keyboard.
Last and not necessarily least, consider the ever-popular closet and sound blanket trick. This involves a speaker cabinet, a closet or large cupboard, and at least a pair of the thick, padded blankets normally used professionally for sound insulation or by moving companies (quilts and regular bedding blankets are ineffective). You'll lose some speaker "air" and room interaction, but you'll be able to crank the amp and avoid unwanted noise complaints. Assuming the blankets are properly placed, the volume level should seem no louder than that of a distant stereo system blaring at someone's party.
Ukuleles were in highest production from 1916 to the 1930's, though still manufactured in quantity until 1965. Production quantities during some periods were as great as Martin guitars. Martin ukes are considered to be the best for craftsmenship and sound. The Koa wood models are more collectible than mahagony models. The fancier style 5 models are worth more than plainer styles 0 to 3. All sizes are collectible.
When you are shopping for effects pedals, a good feature to look for is true bypass. Your overall signal path is vulnerable to noise and impurities introduced by the circuitry of anything between your guitar and your output device (such as your amplifier/speaker). Pedals without true bypass, or ones with buffered circuitry, will contribute to some signal degradation as your signal passes along the path because the signal is routed directly through the pedal circuitry. Pedals that have true bypass direct your signal around the pedal’s circuitry, or bypass it, when you switch the pedal off, thereby maintaining the integrity and cleanliness of the signal. Your amplified guitar will sound more robust as a result and you won’t be required to crank up your volume as much to compensate for lost signal. The only disadvantage of pedals with true bypass is that sometimes, when you're playing with distorted or high-gain amplifier tones, you might notice switching noise when you switch the pedal off and on.

Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
Dave Murray: select alder body with a nitrocellulose lacquer finish, flat soft V-shaped maple neck with satin back, 21 medium-jumbo frets, American Vintage hardware and ahumbucker/single-coil/humbucker configuration – DiMarzio Super Distortion DP100 (bridge), American Vintage ’57/’62 (middle), DiMarzio PAF DP103 (neck) – with 3-way switching. Other features include chrome pickup bezels, synthetic bone nut and aged white plastic parts with black switch tip. Available in Black only and as a Japanese “Tribute” version with an original Floyd Rose locking vibrato system, dual DiMarzio Super Distortion DP100 humbucking pickups (Neck/Bridge) with a Fender Texas Special single-coil pickup (Middle), 3-way switching and an oval neck profile.
Read Full Review It’s amazing to see a company that excels in all the products and services they offer, while other companies are struggling and scratching their heads to find a way to break through in the market. The best example of such success on Yamaha is with their long line of guitars and two of those guitars they have are considered by many is best for beginners. The guitars I’m taking about is the Pacifica Series PAC112 together with the PA012 featured here, which is also available on a guitar package.

I had a similar problem and went with a similar solution - the Vox Tonelab amp modeler and multi-effects unit. Has a headphone out that works fine for practice. Plus it is working well for gigging as well. I can practice tunes with the exact amp and effects that I'm going to use. When I get in front of the guitar amp, I just need to get a clean sound and give it a little color in the tone. It isn't perfect for gigs, but it is SO easy to practice with and can sound like a Fender, Marshall, Hiwatt, Mesa - whatever. This is starting to sound like an ad, so I'll stop. :-) – Anonymous Jan 18 '11 at 10:47

In attempting to amplify acoustic guitars, inventors and musicians alike soon discovered an issue that is still problematic for many of today’s acoustic guitarists — feedback. Hence, the evolution of solid body electric guitars, spearheaded by Vivi-Tone in 1934. Rickenbacker followed up by distributing the Electro Spanish in 1935 (Electro Spanish later being shortened to ES by Gibson for their line of hollow body and semi-hollow electric guitars), and the Slingerland Songster 401 was introduced in 1936. But some guitarists — mainly jazz and blues musicians — came to miss the warm, full-bodied tone that can only be generated by the free-space resonance of tops and backs made from quality tonewoods. And so it is that we also have the hybrid design of semi-hollow body electric guitars.
The Les Paul guitar line was originally conceived to include two models: the regular model (nicknamed the Goldtop), and the Custom model, which offered upgraded hardware and a more formal black finish. However, advancements in pickup, body, and hardware designs allowed the Les Paul to become a long-term series of electric solid-body guitars that targeted every price-point and market level except for the complete novice guitarist. This beginner guitar market was filled by the Melody Maker model, and although the inexpensive Melody Maker did not bear the Les Paul name, its body consistently followed the design of true Les Pauls throughout each era.
So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:
The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
But when combined with those Dean humbuckers, this thing full-on rocks! It’s full of gain, fuzz, buzz, but still articulate enough thanks to the strong middle frequencies, reeling in that Dime sound to cut any mix and in style. Additionally, the price is lower than many of the models on the rundown, making this puppy a safe choice for cheap good guitars.

Power valves (tubes) can be overdriven in the same way that pre-amplifier valves can, but because these valves are designed to output more power, the distortion and character they add to the guitar's tone is unique. During the 1960s to early 1970s, distortion was primarily created by overdriving the power valves. Because they have become accustomed to this sound[dubious – discuss], many guitar players[who?] favour this type of distortion, and thus set their amps to maximum levels in order to drive the power section hard. Many valve-based amplifiers in common use have a push-pull output configuration in their power section, with matched pairs of tubes driving the output transformer. Power amplifier distortion is normally entirely symmetric, generating predominantly odd-order harmonics.

Taylor Guitars is an American guitar brand based in California. The company was founded in the mid 1970’s, and it has since grown into one of the largest and most respected acoustic guitar companies. Taylor guitars are recognized for their incredible quality, craftsmanship, and innovation, while still being an accessible guitar at a reasonable price.
Our fretwork is one of the things we are most proud of. We go to the extreme to make sure that your guitar is going to play the best it can. The fingerboard is planed under tension. The fretting process is done with epoxy fretting. We use a special blend of epoxy that makes re-fretting very easy without messing up your fingerboard. This process is used for multiple reasons. One of the advantages to this type of fretting is that you lose the hollow gaps under the fret that you find with the traditional way of fretting. In traditional fretting, with each fret you put on, it is like driving a wedge into the fingerboard, which causes back tension on the neck. With epoxy fretting, all of these issues are eliminated. The epoxy under the frets helps to transfer string vibration throughout the neck to the body, and relieves all stress and tension on the neck that occurs with traditional fretting. This results in a stress-free neck, which allows the truss rod to work properly and to adjust the neck accurately.
Chet was THE best guitarist to ever reach popular standings. That doesn’t include the classical guitarists and jazz guitarists who could play him under the table though. Which gets me thinking, this list would be a lot different if it included people that were in the background, but were easily better than anyone popular. For me chet would still make top 100 even on that list though. That’s gotta mean something…
This includes guitar tutors and coaching software, guitar & amplifier emulators, reference tools and more. You will find tablature software in the Tablature category and software to slow down guitar solos in the Slow Down Music category. Software to tune your guitar can be found in the Instrument Tuners category and specialized chord software in the Chords category. Software designed specifically for bass guitar players can be found in the Bass Guitar category.

Large-diaphragm models are popular, with Neumann mics particularly favoured. The famous U87 studio workhorse is probably the most commonly mentioned, but it's by no means the only contender. Eddie Kramer, Steve Albini and John Leckie single out its predecessor, the U67, for example, while both of the earlier U47 models (valve and FET) receive name checks from people such as Steven Street, Glenn Kolotkin, Butch Vig and Bruce Botnick (note that U47s were marketed under both Neumann and Telefunken brand-names, but they're essentially the same mics). Neumann aren't the only game in town, though: AKG's C414B-ULS is probably joint most popular large-diaphragm model alongside the U87.
Some large combo amps and large speaker cabinets have ball-bearing-mounted caster wheels to make it easier to move them. All combo amplifiers and speaker cabinets have some types of carry handles, either a folding handle on the top or recessed handles on the sides. There are two types of recessed handles: some equipment has folding, spring-loaded metal handles, with the spring holding the handle flush against the chassis until it is pulled out for use; the second type is handles that are non-moving, and which are flush with the surface of the amp/cab, but with a hollow area behind the handle for the hand to go. In both cases, the handle does not project out beyond the amp/cab, preventing the handle from catching on items during transportation and/or being damaged.
{ "thumbImageID": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "defaultDisplayName": "Fender Special Edition Deluxe PJ Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000048792", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Olympic-White-1500000048792.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "3-Tone Sunburst Maple", "sku": "sku:site51434378852529", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple-1434378852529.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sea Foam Pearl", "sku": "sku:site51365435327256", "price": "699.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl-1365435327256.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Whether you're recording or just plain playing for the fun of it, a headphone guitar amp is a great thing to have. You can even choose headphone amps that will work with pedals, mixing consoles and other connections, giving you a ton of versatility in how you use them. If there's one thing that's universally true about these amplifiers, it's that no guitarist should be without at least one.

As music professionals, we're all familiar with guitarists and the rows of pedals they set up on stage at every gig. They're definitely on to something when it comes to effects on-the-fly, but when you're setting up a studio or pro audio rig, there's a simpler solution: multi effects processors. These full-sized units bring a ton of versatility to the table (or, more accurately speaking, the rack) and they can play a crucial role in shaping your own signature sound.

Excellent article. I have found that is a complete waste of time trying to convince guitarist of anything contrary to what they already believe about instruments. The level of passion for the “wood doesn’t matter” camp is truly astounding. We are not testing a new drug or solving cold fusion. The question is simple, does wood make a difference in the tone of an electric guitar? Intuitively, it would seem strange if it didn’t; but, there are many factors that are going to affect the sound produced from a guitar; isolating them is as difficult as creating a study that will convince anyone of an idea they already are clinging to. I think this is a pretty good experiment, better than most I have seen. In the end though, who cares?…really. If someone would like a guitar made out of a Formica counter top…go for it, locking tuners, the pickups and strings of your choice…you’ll be ready to rock. And won’t you be the clever one? As for myself, my opinion, musical instruments have character, a soul if you will. That character comes from the material it is made out of and the craftsman that made it. There is no object more alive than a musical instrument. For arguments sake, lets grant the “wood doesn’t matter” their entire argument. I’d still buy the korina instrument over the countertop. And like most stubborn asses who play guitar, you won’t convince me otherwise.
There were actually two bolt-neck DT-250s, both with basswood bodies and the very nice locking Powerocker vibratos. The regular model came in black or white and had a rosewood fingerboard. Well, a little boring. But the Transparent Red TRs came with a maple fingerboard stained red. Yes, that’s what we’re talking about! If you’re going to have a red guitar, you ought to have a matching red fingerboard. Hard maple, made slick with the red polyurethane.
String sage Ernie Ball reckons it’s made some of the world’s strongest strings with the Paradigm set, which promises longer string life while retaining the company’s iconic Slinky tone and feel. Ultra-high strength steel can be found in the wound and plain strings, plus reinforcement at the ball end, enabling them to lock in tune fast and hold up to aggressive styles. There’s even plasma-enhanced wrap wire for increased corrosion resistance, too.
If you have an envelope follower, envelope filter, auto-wah or other dynamic touch-sensitive effect, this should go at the very front in most cases, as these effects are almost exclusively dependent upon the dynamics of your playing. Placing most other types of effects in front of them will compress the signal, thereby reducing dynamics and minimizing their performance.

A list that's bound to be disagreed with, and I do. Although I love Hendrix, Clapton, etc. I'm still most impressed with Mississippi Fred McDowell. Bass line, rhythm, lead slide, and singing simultaneously and effortlessly. Several video performance on DVD are available, in case you listen to just an audio recording and wondered "who are the other guitarists playing, they're really good together?" nope, just Fred.

{ "name": "Candy Apple Red", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Candy-Apple-Red-1500000152032.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152032", "shipToStore": true, "displaySku": "K47863000002000", "displayId": "1500000152032   POS #: 113861041", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Candy Apple Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
The musical theory of chords is reviewed, to provide terminology for a discussion of guitar chords. Three kinds of chords, which are emphasized in introductions to guitar-playing,[10][11] are discussed. These basic chords arise in chord-triples that are conventional in Western music, triples that are called three-chord progressions. After each type of chord is introduced, its role in three-chord progressions is noted.
The original flanger effect was produced back in the 1960’s by recording to two tape deck simultaneously and mixing the result. As they were recording, an audio engineer would lightly touching the flange of one the reels of tape. When it played back, it created a swooshing effect similar to what you hear when a jet airplane takes off. Stomp boxes use a delay effect to create a similar sound.
But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
The guitar starts off with a basswood body, carved into the familiar Stratocaster double cutaway. Even the pickguard resembles that of a Strat, although the controls are different, with the Adrian Smith SDX just having two knobs for adjusting master tone and volume. While the neck still looks like a Strat, it is meant for fast and comfortable play, with its compound radius maple fretboard, 25.5" scale length, 1.6875" nut width and 22 jumbo frets. Giving this guitar its versatile tones are two single coils for the neck and middle position, along with a humbucker on the bridge, all of which are designed by Jackson with the approval of the Adrian himself.
Kill Switch A kill switch abruptly stops the sound while it is active and lets the sound play again whilst not active. On guitars with a pickup and pots configuration like that of a typical Les Paul this can be achieved by turning the volume for one pickup off and playing with the pickup selector in the middle position. Whilst holding a note, the player can rapidly switch between middle pickup and the silenced pickup giving a stuttering effect. Do this at your own risk because rapidly switching pickups will inevitably wear your pickup selector. This effect is sometimes implemented by a pedal which is only active while it is pressed down (unlike most pedals which are one click on/one click off). Some people will also modify their guitars to add a dedicated killswitch.
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.
and i dont know how the new ones are, but the only ones, though called AD3000, they weren't like the other 3000 series guitars Agile offered. back then, they came with maple necks. they also came with 3 or 4 piece bodies, while AL3000/3100 etc came with 2. this came with a matching headstock, which only the 4000 series its almost as if the AD3000 was a missing link between the different series of guitars....
The principal difference among the Strats was in finish options. All had 21-fret maple necks, three single-coil pickups, volume and two tone controls, and five-way select. The SWG came in yer basic red or black, with maple ‘board and chrome hardware. These had traditional non-locking vibratos. The SGV was offered in red with white graphics. The SSX was the dusey, with purple burst (white outside, purple in center), tiara turquoise, blue pearl, metallic white, black and candy apple red finish options, with… with matching colored maple fingerboard and (that’s and) matching chrome hardware.
Regardless of the invention debate, it is clear that former radio repairman Leo Fender was the first to mass-produce and sell a successful solid-body Spanish-style electric guitar. His company’s simply constructed 1950 Fender Broadcaster (renamed Telecaster as the result of a trademark dispute), with its flat body and a neck bolted onto it, was initially derided by competitors as too simple and lacking in craftsmanship. Gibson’s president Ted McCarty dismissed it as a “plank guitar.” Yet everything about its patented, practical design was optimal for mass-producing an inexpensive solid-body guitar, earning Fender the moniker “the Henry Ford of the electric guitar.”
The Chapman ML2's classic, single-cut body, two chrome-plated humbuckers and a black pennant headstock that’s not a million miles away from Gibson’s Les Paul. But appearances can be deceptive: this instrument is a very different beast. Chapman pegs its weight at a relatively svelte 3.5kg, so it’s unlikely to see you turning over your salary to the chiropractor. It’s also heavily contoured with its cutaway and heel carved for easy access to the upper frets. It has a modern, satin-smooth C-profile neck, hewn from maple (another deviation from the LP blueprint) and glued neatly to the body. The 25" scale lends it a unique feel - and with 24 jumbo nickel frets, the ML2 Modern is hugely shreddable. Both pickups feature an Alnico V magnet at the heart (think tight low-end, brightness, a little less on the mids), but with a coil-split, accessed by pulling up on the master tone pot, you can split the signal of these humbuckers for some single-coil snap and sizzle. The ML2 Modern makes a good claim on being all things to all guitarists. With coils split or not, we love its tone. That bridge ’bucker really sings with some gain. While the neck pickup is a great ‘rhythm’ humbucker - articulate and dynamic. Whether you find the modernity in its versatility, or in a feel that’s more Jackson than Gibson, the ML2 Modern sure lives up to its name.
Honeyman-Scott’s solos were concise and economical, getting the point across in only a few measures. His solo on “Kid” is a pop song unto itself that evokes the Beatles’ finest melodic moments, while his three- and four-second bursts on “Tattooed Love Boys” unleash more emotion, fire and style than most guitarists can convey in an extended 15-minute solo.
The x99 is as Soldano as an amp can get; its purple! The X99 (a step above the 3-channel X88) is a unique MIDI-controlled preamp, featuring Tim Caswell’s innovative system of real-time-controllable motorized knobs. Modeled after the SLO, the X99 has got the Soldano character that everyone’s grown to love. If you find one, let us know! Like most discontinued Soldano’s, the X99 is virtually impossible to track down.
Music Go Round® is your ultimate used gear resource—we buy used musical instruments all day, every day. We understand the value of your instruments and make it easy for you to sell or trade. Bring your used music gear, such as guitars, drums, amps, bass guitars and pro-sound equipment —we’ll pay you $$$ on the spot—and you take home that must-have piece to your collection.
The easiest way to record bass is to just plug it straight into the console/interface—of course, using the correct instrument-level input or dedicated DI box, and not a standard line input. This will provide a nice, clean, deep tone, but it will likely lack the growl and grit that’s often desired—for that, you’ll want the sound of an amp. While you can always use a bass amp sim plug-in later, in the mix (see below), there’s nothing like the pants-flapping wall of low-end sound coming out of a real bass amp, if one is available. But most engineers will record both—a DI’d signal, and a miked-up amp. They can be combined later on, for the best of both worlds—the clean, round, depth from the DI, with the edge and midrange punch of the amp (but see below, for a caveat).
Whenever I can do that, it’ll be a good day. Instead, we’re looking for a the correct combination of quality and cost, just like the aforementioned guitars. Ibanez usually gives you a great guitar for what you pay, so here we’ll narrow things down a little more and look at some of the best Ibanez guitars and "honorable mentions" for our greater list.

We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
A marvelous 6 string acoustic guitar for the right handed. It has a beautiful natural satin finish, giving it awesome looks for stage performance. It is developed by cort guitars, with over 50 years of experience in musical instruments manufacture. The body back and sides are made from mahogany, whereas the top is spruce laminated. Prices range from around INR 7,600 depending on offers available, which is relatively affordable. You can get more product details by clicking on:

This fully analog simple plug and play guitar amplifier is enjoyable to play with. It has a switchable clean and dirty channel with separate volume knobs that shares a 3-band EQ treble-mid-bass and gain control to add more grit so players can arrive on a crunch and lead sounds. Other useful attributes on the amp are set of input jacks for a headphone and audio source to play along with a backing track.

Any experienced professional guitarist will tell you there’s usually a big difference between what works on the live stage and what works in the studio. Most discovered early on that the carefully honed live tone they were so proud of just didn’t work on the recorded track, for any of several reasons, or not without a lot of tweaking and readjustment, at least. The first thing you’re likely to discover is that it’s a lot harder to record satisfactory overdriven and distorted guitar sounds than it is to record clean or mildly crunchy sounds, a revelation that often goes hand-in-hand with the fact that big amps tend to be more difficult to record satisfactorily in general.
If you've ever opened up a non-digital pedal - for example, a fuzz pedal - there's a good chance you will have seen a dizzying array of tiny components. However overwhelming this looks, however, there's probably only a relatively small number of component types present - and on boutique or older pedals, these should be even more clearly identifiable.
Having perfected the modelling amp concept, Line 6 have become experts at delivering a huge variety of great sounds in a convenient, affordable package. Experiment with 12 different amp models, from classic 1960s Fender tone to the “Insane Red”, inspired by the mental Mesa/Boogie Dual Rectifier, and sculpt your tone further with the seven built-in effects.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings: guitar strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"acoustic guitar strings","eVar18":"03e64461-af2b-4a48-8533-e7748b0554d2","prop5":"[gc] shop: accessories: strings: guitar strings","prop6":"[gc] shop: accessories: strings: guitar strings","prop3":"[gc] shop: accessories: strings: guitar strings","prop4":"[gc] shop: accessories: strings: guitar strings","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2"}
A volume pedal does the same thing a volume knob on a guitar, but it allows you to control the volume with your foot. It is not a boost, it just allows you to sweep between zero output and the full output capacity of your instrument. Many guitarists use a volume pedal, also sometimes referred to as an expression pedal, to create pedal steel-like swells, where a note or chord is played, then the volume is slowly and smoothly raised. Volume pedals can also be used as a boost effect, by simply playing at less than full volume, then stepping on the pedal to go to full volume momentarily when you need the extra boost. Volume pedals can make a standard electric guitar sound like a pedal steel when used with a well-practiced foot technique.They can also be an important pedal to have in your toolbox when playing in a band with multiple guitars.
No guitarist should ever be without a trusty amplifier to plug in and rock out. Without the invention and evolution of the amplifier, the world of popular music would be a very different place. Lucky for all of us, todays amplifiers are louder and more raucous than ever, filled with effects and features that will take you on a musical journey that you'll never forget. Some of our top brands in this category include: Fender, Acoustic, Bogner Marshall, Vox, Orange, and much more.
Boss is an effects legend, but thanks to the digital expertise of parent company Roland, the brand now also has an amp that promises organic, valve-like tones at an impressively low price. It does this by using the same Tube Logic technology employed in last year’s 150-watt Waza Craft head, and other Roland amps. The K100 doesn’t invite direct comparison with specific amp brands and models. Instead, there are five generic voices: Acoustic, Clean, Crunch, Lead and Brown. You can pre-load 15 different effects types into the amp, with 55 to currently choose from when you link the Katana to the Boss Tone Studio application. The Katana may look plain, but its tones are truly exceptional. The Crunch voice is responsive and dynamic, while the Brown solo sound is as good as many USA valve-powered competitors. Start using the Tone Studio editor and the Katana’s edge becomes sharper still, with different effects chain presets and assignable control parameters.
I own several guitars ranging from 700 dollars to 2000 dollars so I knew not to get my expectations up when purchasing a 100 dollar. I bought this as a gift for someone to learn on but when it arrived, I could not believe the quality of guitar this is. The tuning keys are high quality, the neck and fret board are high quality. It holds its tune as good as my Ovation and Ibanez acoustics as well as my 2000 dollar PRS guitar. Very easy to press the strings. Surely I thought this would be the difference maker from my more expensive guitars but it's actually easier to play. The pickup is a little more brighter sounding than on more expensive guitars but it's nothing you can't fix with your settings.

The Chapman ML2's classic, single-cut body, two chrome-plated humbuckers and a black pennant headstock that’s not a million miles away from Gibson’s Les Paul. But appearances can be deceptive: this instrument is a very different beast. Chapman pegs its weight at a relatively svelte 3.5kg, so it’s unlikely to see you turning over your salary to the chiropractor. It’s also heavily contoured with its cutaway and heel carved for easy access to the upper frets. It has a modern, satin-smooth C-profile neck, hewn from maple (another deviation from the LP blueprint) and glued neatly to the body. The 25" scale lends it a unique feel - and with 24 jumbo nickel frets, the ML2 Modern is hugely shreddable. Both pickups feature an Alnico V magnet at the heart (think tight low-end, brightness, a little less on the mids), but with a coil-split, accessed by pulling up on the master tone pot, you can split the signal of these humbuckers for some single-coil snap and sizzle. The ML2 Modern makes a good claim on being all things to all guitarists. With coils split or not, we love its tone. That bridge ’bucker really sings with some gain. While the neck pickup is a great ‘rhythm’ humbucker - articulate and dynamic. Whether you find the modernity in its versatility, or in a feel that’s more Jackson than Gibson, the ML2 Modern sure lives up to its name.

Guitar FX BOX does REALLY real-time DSP. Signal is sampled from sound card input, processed and then sent to the output with VERY LOW LATENCY. Unlike many other "real-time" audio programs, I/O delay with Guitar FX BOX is extremely low, virtually undetectable! This is achieved using DirectSound (or WDM streaming) for fast access to the hardware (sound card) and fast DSP algorithms optimized for real-time processing. Through DirectSound, latency is about 20ms with most sound cards, or even less. When WDM streaming driver is used, latency can go as low as 5ms! Nevertheless, exact total i/o latency still depends on hardware/drivers.
If you haven't tried a higher end Yairi then you have missed it. These are great hand crafted guitars with a very good neck and great sound. They are branded Alverez in the US but be sure it is one of the Yairi made. There are not lots of them made due the the complete hand crafted design. You don't find them in the music stores much but they should be there. I have owned one for many years and have yet to pick up any other guitar that can match it in my opinion
For the metalheads, Ibanez has their Iron Label series in addition to the signature models. These guitars are absolutely metal-oriented, with no-nonsense designs that provide exactly what you need for intense shredding without gimmicks. Ibanez Iron Label guitars are based on the S and RG platforms and come in 6, 7 and 8-string varieties, all with fast, shreddable necks. The RG models even have an onboard kill switch so you can do manual strobe effects without the need for a pedal.
Phaser – A frequency-based effect that makes a swirling, swooshing filtered guitar tone. Phasers use the principle of “phase” cancellation in which a filter passes over your guitar tone flipping the waveform at specific frequencies. This signal is then combined with your original guitar tone to give the iconic phaser effect used in songs by Van Halen, Pink Floyd and Smashing Pumpkins to name a few.
The EM-18 came with either a pair of Mighty Mite humbuckers or a pair of DiMarzios. It was otherwise the same as the E-18 with the addition of a three-way mini-toggle coil selector switch which allowed a choice of both or either coil on the lead pickup. This arrangement allowed for a rather remarkable variety of tones, by the way. EM-18 production began in 1979 and some 1,375 were made until the guitar ended in February 1982.

Designed by Mesa founder Randall Smith, the amp uses silicone diodes that give it a gain level and feeling all its own. The amp proved especially popular with metal and hard-rocking groups such as Living Colour, Metallica, Tool, Korn, Soundgarden and Foo Fighters. In 2009, Mesa revamped the Dual with a third, dedicated clean channel, making the venerable workhorse more versatile than ever.

Even with a H-H configuration, you could utilize coil splitting to achieve single coil-ish sounds. While arguably this does not give a "true" single coil sound, if humbucker sounds are mainly used, this can be enough. My impression is that most people aren't using the middle position that much, I think the way forward is to try different pickup configurations to find out what you need.
Awesome and amazing are just two of the many favorable adjectives that are used to describe the Orange Micro Dark. Most users find its tone to be convincingly tube like, while others are very impressed with its volume, considering its portable profile. A lot of users also appreciate its ease of use, and it also helps that it looks really good. Bobby Cannon of Guitar Player magazine describes it as "more than capable of delivering all the vicious tones you can dial in, and there’s no shame in going for a super-light amp that does the job..."
Most Gibson guitars feature two humbucking pickups, giving them a very full, clean sound. They are very simple in design, and easy to use with a focus on quality. Maintenance is also easy with Gibsons. Their bridge style places the strings closer together than the likes of Fender or Ibanez guitars, making them slightly different to play. While there is slightly less room for error in finger placement, the strings’ proximity makes them a better fit for small hands and for instrumentalists who need to rapidly navigate the fretboard.

In 1972, Ovation introduced one of the first production solid-body electric-guitars with active electronics, the Ovation Breadwinner. The model failed to gain widespread popularity, however, and production of the Breadwinner and the Ovation Deacon ceased in 1980. Ovation made several other solid-body models up until the mid 1980s.[28] Since that time the company’s main focus has been acoustic and acoustic-electric guitars.

Paul Reed Smith’s offering to pro musicians with exacting standards, the PRS McCarty 594 takes its name from two things. The first is its scale length of 24.594 inches and the second is that it’s a 1959-spec guitar with four knobs. According to Paul Reed Smith, this vintage-inspired instrument aims to recreate the most desired classic Gibson tone, that of a ‘59 Sunburst.
Like so much else, analog delays were first made possible by a shift in the available technology in the mid 1970s, in this case the advent of affordable delay chips. Techies call these “bucket brigade delay chips” because they pass the signal along in stages from the input pin to the output pin—with as many as from 68 to 4096 stages. Inject a signal, govern the speed at which it gets passed from stage to stage, tap the output and, voila, you’ve got echo. It’s clear from this that the more stages in the chip, the longer the delay the circuit can achieve. The longer the delay, however, the greater the distortion in the wet signal, so most makers compromised to keep maximum settings within acceptable delay/noise ratios.
So there you have five good beginner’s guitars. Bear in mind that while the quality of these instruments is good—it’s a fiercely competitive area—they’re at the bottom of the market. You get what you pay for (as they say). At the same time, “cheap” guitars like these have come a long way in the last ten years and they’re excellent for starting out, before deciding to mortgage your house on that expensive vintage Fender or Les Paul Gibson mentioned earlier.
First, you need to determine what type of guitar you have - acoustic nylon, acoustic steel string, or electric. You want to be sure to use the correct strings for your particular guitar. Acoustic guitars that require nylon strings, such as classical, flamenco and some folk guitars, generally have lighter tops, or soundboards, with less internal bracing than those found on steel-string acoustics, and stand the risk of serious damage if fitted with steel strings. Steel-string acoustics are designed to withstand the added stress that steel strings exert on the top, bridge, nut and neck, and won't sound very good with nylon strings, if they even fit. Electric guitar strings must be made of ferromagnetic metals like steel and nickel, so they can interact with the magnetic pickups, while acoustic-electric guitars typically use a different type of pickup which senses vibrations from the bridge, so acoustic strings may just have a steel core wound with a phosphor bronze alloy wrap for bright tone. Guitars with whammy bars might require a few extra steps to keep everything stable, so check your manufacturer's instructions or look for online videos.

You may be questioning why we’ve not covered bass pickups in this article. However, to keep things simple, we decided to stick solely to guitar pickups. If you are looking for a new tone or more power for your beloved bass, check out our dedicated articles on Jazz Bass pickups and Precision Bass pickups for all you need to know, as well as recommendations.

The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place...  Click To Read More About This Product
If you've NEVER heard of EZMix for effects, Impact Soundworks Shreddage 2 IBZ or Prominy V-Metal for guitar, or Alchemist Studios Texas Grind for bass, or Impact Soundworks Shreddage Drums for drums, then I would say you're right, (Amplitube 4 is out right now, by the way). You need Kontakt 5.5 for all of this to work though, so if you have this already you need to upgrade.
The modern full size classical guitar has a scale length[46] of around 650 mm (26 in), with an overall instrument length of 965–1,016 mm (38.0–40.0 in). The scale length has remained quite consistent since it was chosen by the originator of the instrument, Antonio de Torres. This length may have been chosen because it's twice the length of a violin string. As the guitar is tuned to one octave below that of the violin, the same size gut could be used for the first strings of both instruments.
Before buying any guitar you have to fix a budget range, so that later on you do not end up blowing off more money than you actually wanted to. Yes, it is true that buying a guitar can be expensive, but you do not have to burn a hole in your pocket in order to buy one. Just have a price range fixed and then search for the best ones accordingly. You may not find the good ones right at the beginning, but eventually you will definitely find the perfect one that will even last long.
I suspect this has been done by someone but I can't find any such tests in my quick internet search. Seems to me this is the only way to really settle the debate; the differences may be too small to hear, but regardless if there is differences then the tone is being affected by the instrument. In that case the wood and body design is making the string vibrate differently, which is what the pickup...picks up.

There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.
Wow! I have been playing guitar for forty years and this is the best guitar I have ever played for fingerpicking. The sound is marvelous, both using an amplifier or not. The quality of construction is beautiful. And, it is easy to play as well. You know when you play an instrument that is just right, and this guitar is one of them. And it is priced for anyone's budget.
A difficult effect to explain, the compressor’s value is in it subtle and careful use. A compressor acts like bumpers on your signal's amplitude, preventing the volume from spiking too loud while also preventing the volume from decaying too quickly. Because of this, it increases sustain - which is great for solos - while evening out playing dynamics. Country and funk players use compression heavily to achieve spanky and crisp punctuation within their playing. Compressors will add noise to the signal, so many higher end boxes will have a noise gate feature. Other than making cleans sparkle, you can also front-load your distortion or overdrive to get great clear sustain.

Chorus is an effect that doubles and detunes your signal. It can add an otherworldly effect to your tone, as well as add emphasis to your playing. Chorus adds shimmer and depth to your signal. While it shines in making clean playing more lush, many players, Zakk Wylde included, use chorus to add a doubling effect to their solos, which really will bring it to the forefront of a song. When used carefully, you can even approximate the sound of a 12-string guitar.
Specifically, the book includes exercises to focus on sweeping, alternate picking, string skipping, and bending in addition to arpeggios and legato. Keep in mind, this book builds on the skills you’ll learn and practice along the way. Having said that, intermediate players can jump a few chapters and still get a ton of value out of the guitar exercises in this book. In that way, it really can function as a choose-your-own-adventure type way to learn guitar that matches your current skill level.
Tube amps use the height of the 1940s electronic technology to give out what is widely considered the best sound quality to date. Since some people tend to be confused by this, it’s important to note that only their sound rendering circuitry is based on vacuum tubes (or lamps) while the equalizers and assorted bits employ transistors like any other piece of modern electronics, with no bearing whatsoever on how the sound will come out.
SOLD OUT: This guitar is very familiar to me as I have had other guitars from another Famous Japanese guitar maker That was known to make this very guitar already I believe this to have been made by those responsible for the Takamine or Mountain ands Tak made for Washburn import, needless to say this is a high quality Well built Japanese copy of the Martin D-19 and is Identical to the Takamine F320. This example was well crafted over 32 years ago making this a true vintage guitar based on the classic These were quite well constructed by any standard fit and finish is excellent typical of this era Japanese crafted and were made with very nice woods too... The top on this guitar is Solid Spruce and is nicely figured and the back sides and neck are all Mahogany, The fingerboard = bridge & head-stock front overlay is rosewood. This combination is know for some sweet mellow tone & good volume...this example is in above average vintage condition its finish still shines like glass and with only a few minor doinks and with its true 32+ years of well taken care of age its natural patina is very nice in deed. This guitar has the 1-11/16ths nut width it’s a comfortable medium profile neck and it plays with ease and has good action, neck is straight with correct relief and frets are still good at 88%. Tuners are original and are working well, no splits or cracks warps or twists or issues of that nature structural integrity is excellent. Volume is very good, tone is sweet, this makes for a very good playing guitar That sounds great and is very enjoyable all round for the player. Vintage tone! .. thanks for your interest if wanted you can contact Joe at . .
I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
Nowadays, you can find many in-between sets, but you'll want to have a solid understanding of what the gauges are in terms of actual measurement and how they affect your ability to perform with your desired tone.  These relatively open descriptions will also differ from acoustic strings to electric strings, so your experience in handling many types of guitar strings and gauges is paramount in making the right choice.
Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.
However, it does give you a good flavour of the Martin and is a very playable plug-in, one of the best ways to see proper guitar emulation in action without paying for it. There are tab and effects options and a keyboard for playing it (we’ll assume if you can play a guitar, you’ll opt for the real thing, anyway). While it is free, we think you’ll be sorely tempted to upgrade, which will set you back $169.
Founded in 1976, Schecter Guitar Research started out by producing replacement parts for existing guitars of the era. They then took the production a step further by custom building guitars, and have grown steadily ever since. Today, Schecter is known for their extensive line of mass produced electric guitars, and their instruments are well received in the rock, punk and metal circles.
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars in the original factory at 225 Parsons Street inKalamazoo, Michigan. Many of their models evoke memories of Gibson’s late-1950s/early-1960s “golden years.” The H-150 and H-157 are reminiscent of the original Les Paul and Les Paul Custom, while the H-535 is a modern version of the Gibson ES-335.
If you’re looking for a solid start on how you will sound without settling for a tube amplifier due to its price, maintenance and back breaking weight to carry around. The Marshall MG30FX combo amp is surely one of the best out there on capturing iconic sounds, as well as the legendary Marshall tones that other brand of amplifiers frequently emulates, adding it to their bank of amp models.
Previously, Epiphone guitars were considered to be the biggest competitor of Gibson. However, they were later acquired by Gibson who has retained the name of this brand to distinguish them from their pricey brothers. You can certainly consider it a budget-friendly production from the high-end guitar makers. Epiphone, just like the Gibson’s Les Paul, shares the same design but is available at a much lesser price. When it comes to craftsmanship, then we must say that Gibson is much better than this one. Unfortunately, Epiphone utilizes low-quality products such as mahogany and other electronic components.
Uh, Roland. I don’t know when was the last time I read about the best amplifiers and one of Roland’s models was not there. That’s not due to their ability to market their instruments to everyone (well, they are good at that too, probably) BUT the main reason why they are always a talk of the town (of a very musical and amplifier obsessed town) is their quality of production. With a lot of expensive amps, they are also graceful enough to give us the MERE MORTALS ability to bath in the glory of what is Roland tone. This CUBE‌-10GX amp is a 10-watt little combo amp with one 8 inch speaker that is ideal for home practice or anyone who needs an inexpensive model that will not ruin their performance. With built-in effects, heavy-duty cabinet design, and a compact construction the CUBE‌-10GX amp might be your best choice for a practice amp that also works as a traveling amp.
Fingerboards vary as much as necks. The fingerboard surface usually has a cross-sectional radius that is optimized to accommodate finger movement for different playing techniques. Fingerboard radius typically ranges from nearly flat (a very large radius) to radically arched (a small radius). The vintage Fender Telecaster, for example, has a typical small radius of approximately 7.25 inches (18.4 cm). Some manufacturers have experimented with fret profile and material, fret layout, number of frets, and modifications of the fingerboard surface for various reasons. Some innovations were intended to improve playability by ergonomic means, such as Warmoth Guitars' compound radius fingerboard. Scalloped fingerboards added enhanced microtonality during fast legato runs. Fanned frets intend to provide each string with an optimal playing tension and enhanced musicality. Some guitars have no frets—and others, like the Gittler guitar, have no neck in the traditional sense.