Shop Hourly Rate is $60.00 per hour. Since each guitar is unique, prices quoted are estimates and may be adjusted based on actual time involved. A final price will be submitted prior to actual work and price may need to be adjusted in the case of repairs that get more involved as the work progresses. (Please see the article on the 1975 Gibson Hummingbird for a good example of this.)
It was also during this time that Perry Bechtel, a well-known banjo player and guitar teacher from Cable Piano in Atlanta, requested that Martin build a guitar with a 15-fret neck-to-body join[citation needed]. Most guitars of the day, with the exception of Gibson’s L-5 archtop jazz guitars, had necks joined at the 12th fret, half the scale length of the string. In keeping with Bechtel’s request, Martin modified the shape of their 12-fret 000-size instrument, lowering the waist and giving the upper bout more acute curves to cause the neck joint to fall at the 14th fret rather than the 12th. Fourteen-fret guitars were designed to be played with a pick and replace banjos in jazz orchestras. Thus, Martin named its first 14-fret, 000-shape guitar the Orchestra Model (OM). Martin applied this term to all 14-fret instruments in its catalogs by the mid- to late-1930s.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Spruce - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Block - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: 3-Color Sunburst

Don't forget that you can use MIDI velocity and other controller data to create quite complex effects — and this approach can take up much less computing power than using audio effects. Don't forget that you can create audio-style effects purely through MIDI. For example, using a grid-style sequencer, it's very easy to program in echo and delay effects, just by drawing in the repeated notes and then putting a velocity curve over the top to simulate the echoes fading away. By combining this with automated MIDI control of other parameters — reverb send, filter cutoff and resonance, for example — you can alter the timbre of the repeated note and create dubby-sounding, feedback-style delays. Stephen Bennett
Epiphone finds it right to imitate Gibson for their guitars. Now owned by Gibson, the brand still brags about its Gibson-like style, especially when it comes to Les Pauls, SGs, Flying Vs., Explorers, and other Gibson classics. For greenhorns, the Epiphone Les Paul Standard comes in as the best choice offering quality specs in an affordable range. From then onward, you can get your hands on the Les Paul PlusTop PRO and the Les Paul Custom PRO without burdening your pocket.
Once you've mastered a few songs on the guitar, you may want to record what you can do so others can hear you shred a wicked solo. Or you may want to use your recording to help improve your skills. In either case, recording your electric guitar outside of a studio can result in poor sound quality that is less than desirable or noise complaints. Depending on your situation and equipment, there are many factors you'll likely have to tweak on your way to getting the best recording, but with a little effort, you'll soon be able to listen to an awesome recording of your musical ability.

Power amp clipping is not the same thing as preamp/preamp tube clipping. Sending a power amp signal that is getting power amp clipping to a speaker can blow the speaker. Sending a preamp/preamp tube clipped signal through a speaker is not harmful. In practice, part of the "breaking up" amp sound, of a "cranked" amplifier, which is widely appreciated by hard rock, metal, punk and blues musicians, is a mix of preamp and power amp clipping. One of the benefits of using a separate components head system, in which a separate preamp and power amp are mounted in a rack, is that the bassist or bass tech can watch for the clipping warning LED on the power amp and lower the power amp volume, if necessary.

Another example is Ovation, the company that almost single-handedly created the acoustic/electric category and radically altered views about how acoustic guitars should be constructed. No matter how hard they tried, Ovation’s repeated attempts to enter the solidbody electric area have failed. Instead, Ovation finally purchased Hamer. However, Ovation’s marketing failures do not mean it hasn’t made some pretty interesting – even innovative – electric guitars over the years, and these represent one of few areas in guitar collecting where you can find excellent, historically significant instruments, often at remarkably reasonable prices. Here’s the scoop on Ovation electrics (touching only briefly on acoustic/electrics).
It is famed as the producer of some of the intriguing piece of guitar around like arch top ones, the SG series, Flying V, ES175, Firebird and more. In fact, the ES 175 was the first popular electric guitar around the world at the time. Another peculiar offering under them is the Les Paul Melody Maker, which has been the go-to option for many around the globe.
By the 1960s and 1970s, semiconductor transistor-based amplifiers (also called "solid state") began to become popular. This was in large part because for a given wattage level and feature level, solid state amplifiers are less expensive, lighter weight, and require less maintenance than tube amplifiers. As well, transistor amplifiers are more reliable and less fragile than tube amps. In some cases, tube and solid state technologies are used together, usually with a tube preamplifier driving a solid state power amplifier. There are also an increasing range of products that use digital signal processing (DSP) and digital modeling technology to simulate many different combinations of amp and cabinets.
As both the British invasion and the 1960s came to an end, Rickenbacker guitars fell somewhat out of fashion; however Rickenbacker basses remained highly in favor through the 1970s and on. Perhaps as an echo of the past, during the late 1970s and early 1980s, Rickenbacker guitars experienced a renaissance as manyNew Wave and jangle pop groups began to use them.

Contrary to popular belief, magnetic pickups are used on both acoustic guitars and electric guitars. These pickups sit in the sound hole of a guitar, so they don’t require any drilling or permanent modification. They’re also commonly an aftermarket addition (the John Lennon signature guitar is the only exception to this trend that springs to mind).
When you think about playing lead guitar, you think a lot about learning scales, learning guitar techniques like bending, sliding, vibrato, double stops, and other playing techniques that help give your guitar solos personality. One thing a lot of guitar players overlook, particularly in the beginning, is tone. A guitarist’s tone can be everything. Tone can act as a signature for guitar players. In this really neat Guitar Control video lesson, Robert shows you three electric guitar tone tips that can bring your guitar sound to life and make it instantly recognizable.

{"id": "114096449", "categoryId":"site5AAG", "name":"Used XM-DLX Solid Body Electric Guitar", "pageUrl":"/Used/Washburn/XM-DLX-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/NonExistingImage-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Washburn", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "0", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Used"}
Paul Reed Smith Guitars SE Standard 24 is their baseline model that brings a lot of the features you can find in more expensive PRS guitars. It offers a great combination of electronics, hardware and tonewood. All at a price that makes it a bargain. If you’re looking for a neutral sounding guitar with enough punch to play whatever genre you’re into, Paul Reed Smith Guitars SE Standard 24 is worth checking out.
The solid body electric guitar was a major design advance introduced by Leo Fender in the early 1950s. The solid body guitar helped remedy the feedback problems of hollowbody instruments. They were also easier to make, which led to mass market production. Fender introduced the iconic Telecaster and Stratocaster. Soon Gibson also introduced their first electric guitars in a partnership with Les Paul to produce what would become the equally iconic Gibson Les Paul.

Effects units are available in a variety of formats or form factors. Stompboxes are primarily used units in live performance and (in some cases) studio recordings. Rackmount devices saw a heavy usage during the later 20th century, due to their advanced processing power and desirable tones. However, by the 21st century, with the advant of digital Plug-Ins and more powerful Stompboxes for live usage, the need and practicality of rackmounted effects units went down, and as such, prices of rack effects have diminished due to lower usage.[5] An effects unit can consist of analog or digital circuitry or a combination of the two. During a live performance, the effect is plugged into the electrical "signal" path of the instrument. In the studio, the instrument or other sound-source's auxiliary output is patched into the effect.[6][7] Form factors are part of a studio or musician's outboard gear.[8]
Dexter Holland (b. 1965) is the rhythm guitarist of punk rock band The Offspring and has played Ibanez guitars for most of the band's existence. He currently uses a custom diamond plate RG with a custom Jägermeister logo on the twelfth fret, as well as DiMarzio Super Distortion pickups, though he used to use a brown and green custom RG and has been seen with a custom Purple RG.
Epiphone is regarded as one of American’s oldest and most revered musical instrument manufacture, which was founded in 1873 by Anastasios Stathopoulos. Their headquarters located in  Nashville, Tennessee, United States. Their produce amplifiers, mandolins, banjos, effect units etc. The company is owned by Gibson Guitar Corporation. Their guitars are the best selling one in Indian market. Available at Rs. 13,000/- onwards (approx). For more details, visit Epiphone.com.
Do you have a short budget? Then we have included the Dean Vendetta XMT model in my top 10 electric guitars review list. This is very little known guitar and you’d be forgiven if you have never heard of it before. But we can tell you with confidence that once you buy this guitar it will exceed your expectations and this is very much pocket-friendly.
As players such as Bobby Broom, Peter Bernstein, Howard Alden, Russell Malone, and Mark Whitfield revived the sounds of traditional jazz guitar, there was also a resurgence of archtop luthierie (guitar-making). By the early 1990s many small independent luthiers began making archtop guitars. In the 2000s, jazz guitar playing continues to change. Some guitarists incorporate a Latin jazz influence, acid jazz-style dance club music uses samples from Wes Montgomery, and guitarists such as Bill Frisell continue to defy categorization.
The Fender Telecaster was developed by Leo Fender in Fullerton, California in 1950. In the period roughly between 1932 and 1949, several craftsmen and companies experimented with solid-body electric guitars, but none had made a significant impact on the market. Leo Fender’s Telecaster was the design that finally put the solid-body guitar on the map.
Considering that the setup on a factory-fresh guitar might be good or bad (and few music stores bother to do setup on inexpensive guitars), we strongly recommend that you have a new guitar professionally set up, which will likely cost about $50. You can also learn to do it yourself; there are plenty of online tutorials, and even at age 15 I managed to figure out how to set up my first electric guitar with a little guidance from my guitar teacher. It’s a good idea for every electric guitarist to at least learn how to set action (string) height because you will want to adjust this to suit your style and skills as they evolve.
The downside of going electric is that now you have to think about a soundboard, or at least an amp. And no self-respecting guitarist can live without a few pedals to tweak the sound. I mean you only need a volume pedal to control the level, a tuner might be nice, chorus is always appreciate, a nice delay pedal wouldn’t be bad, and you might need a clean boost for those solos. Then again, you might just want to plug straight into the soundboard and just enjoy that amplified acoustic sound.
Considering a brand is only really important to a certain extent. Generally, certain top brands will have a reputation for being better at things than others, but given that most guitar brands now have a very wide offering, it’s really best to consider individual models. It’s worth doing a little extra research in some areas though, because there are interesting brand relationships that mean some more budget guitar brands have actually been designed by premium ones. Epiphone and Squier for instance are more affordable sub-brands of Gibson and Fender respectively, which means that you can often get a very high quality product that’s been made in Taiwan rather than the USA for instance. The Dove Pro is a good example of this.
It wouldn't be called a tribute if it didn't follow convention, so having a mahogany body with an arched maple top is expected. Epiphone also designed the neck to mimic the playability of old LPs, giving this guitar a 1960s SlimTaper D profile. However, what makes the Epiphone Les Paul Tribute Plus stand out is the use of two Gibson USA '57 Classic humbucking pickups, which essentially gives this Les Paul a more premium Gibson voice, at a fraction of the price.
Signature Guitar was a Canadian Guitar company, which providing good quality guitars for more than 30 years. They produce high quality electric guitars, beautifully crafted and basses. Their guitars are especially made for Indian weather. The company is situated in Aurora, Ontario, Canada. They are regarded as one of the reputed Indian Guitar brand. The price range starts from 4,999/- onwards (approx).
{ "thumbImageID": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "defaultDisplayName": "Fender Special Edition Deluxe PJ Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000048792", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Olympic-White-1500000048792.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Olympic-White/H96715000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "3-Tone Sunburst Maple", "sku": "sku:site51434378852529", "price": "899.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple-1434378852529.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-3-Tone-Sunburst-Maple/H96715000003006-00-60x60.jpg", "imgAlt": "" } , { "name": "Sea Foam Pearl", "sku": "sku:site51365435327256", "price": "699.99", "regularPrice": "899.99", "msrpPrice": "900.01", "priceVisibility": "1", "skuUrl": "/Fender/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl-1365435327256.gc", "skuImageId": "Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000", "brandName": "Fender", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Special-Edition-Deluxe-PJ-Bass-Sea-Foam-Pearl/H96715000001000-00-60x60.jpg", "imgAlt": "" } ] }

 South Korea has been one of the largest OEM guitar factories in the world since 1980's. Nonetheless, the words "Made in Korea" still invoke visions of low cost alternatives to high-end manufacturers. At Swing, our mission is to lay these stereotypes to rest, and show the world that we can produce true professional grade instruments, made by professionals, for professionals. (Of course, company is not a patriotic organization. This is a matter of manufacturer's pride and self-satisfaction that can be called "Professionalism".)


DISCLAIMER: Hoshino owns the copyright to all of the catalogs scanned in here. This website has NO RELATIONSHIP with the Hoshino Gakki Group and makes no claims to ownership of the linked scans. These catalog scans are provided solely for personal academic/research purposes, so that collectors and others who own one or more of these fantastic guitars can properly identify the model and year of manufacture.
Generally speaking, the amp market tends to be less fueled than other categories by the year-to-year cycle of new product hype that kicks off at the annual NAMM show in January. While there are always hot new models and brands (Quilter amps being a good recent example), amp sales on Reverb are largely dominated by tried-and-true favorites and good deals on used gear.
Three and one half steps down from Drop D. Used by Darkest Hour on the song "Wasteland", Attack Attack!, Baroness (on their first two EPs), The Acacia Strain (on some songs), Dead by April (on some songs) and In Flames (on the song "Transparent" from Reroute to Remain). Chelsea Grin also used this tuning on their album Ashes to Ashes. Also Pantera and Whitechapel recorded Sandblasted Skin in G-g-C-F-A-D, Drop G variation with D standard.
For many years, Martin has used a model-labeling system featuring an initial letter, number, or series of zeros specifying the body size and type; traditionally 5- is the smallest (and technically a terz, tuned a minor third higher than a guitar, at GCFA#DG), advancing in size through 4-, 3-, 2-, 1-, 0-, 00- and 000- (though these are commonly referred to as “Oh”, “triple-oh”, etc. they are, in fact, denoted by zeros, keeping the numerical-size theme constant. These instruments originally had in common a neck that joined the body at the 12th fret. In 1916 Martin contracted with Ditson’s music store to produce a much larger store-badged guitar to compete sonically in ensembles; this boxy thunderer was named the Dreadnought in honor of the most horrific weapons system of the day, a British Navy battleship so large it could fear nothing, or “dread nought”. Indeed, HMS Dreadnought was its name, and it proved an apt product tie-in between the huge ship and the huge guitar. In 1931, Martin introduced D-bodied guitars under their own name, and a new standard was set. Around the same time, to meet the needs of banjo players wanting to cash in the guitar’s new popularity, Martin unveiled a second line of letter-named guitars, the OMs. Taking the body of the 000-, squaring its shoulder to meet the body at the 14th fret, and lengthening the scale, they created a truly legendary line of instruments (OM- wood-and-trim packages ranged from the plain -18 (mahagony back and sides) and -21 (with rosewood) to the full-on pimpmobile OM-45. The 14-fret body of the OMs proved so popular that it quickly became the standard for 00-, 000-, and D- models as well. There things stayed for about 45 years; then, in 1976, Martin debuted the M-36 and M-38. Keeping the narrow-waisted shape and moderate depth of the 000-, and combining it with a width slightly more than even that of a D-, the M-s (sometimes called 0000-) were phenomononally well-balanced in their tone. These have lately been joined by the Gibson-Jumboesque J, and the even larger SJ. The numbers/letters denoting body size and shape are generally followed by a number that designates the guitar’s ornamentation and style, including the species of wood from which the guitar is constructed. Generally, the higher the number, the higher the level of ornamentation. Additional letters or numbers added to this basic system are used to designate special features (such as a built-in pickup or a cutaway).
There are a very large number of acoustic guitar manufacturers in the world. However, not all are among the best, but this American brand specializes in acoustic guitars. You will find Martin guitars among the top 10 acoustic guitars in the world. It has greatly influenced the look and shape of the American acoustic guitars. Martin guitars are made from highly seasoned wood, which produces some really melodious tones. Mind you, these guitars can be expensive and taking care of the instrument is extremely important. It makes some extremely beautiful models like D-28 and D-45; however, they also manufacture budget-friendly models.
Ring modulator: A ring modulator produces a resonant, metallic sound by mixing an instrument's audio signal with a carrier wave generated by the device's internal oscillator. The original sound wave is suppressed and replaced by a "ring" of inharmonic higher and lower pitches or "sidebands".[70][78] A notable use of ring modulation is the guitar in the Black Sabbath song "Paranoid".[79]
Guitar amplifiers can also modify the instrument's tone by emphasizing or de-emphasizing certain frequencies, using equalizer controls, which function the same way as the bass and treble knobs on a home hi-fi stereo, and by adding electronic effects; distortion (also called "overdrive") and reverb are commonly available as built-in features. The input of modern guitar amplifiers is a 1/4" jack, which is fed a signal from an electro-magnetic pickup (from an electric guitar) or a piezoelectric pickup (usually from an acoustic guitar) using a patch cord, or a wireless transmitter. For electric guitar players, their choice of guitar amp and the settings they use on the amplifier are a key part of their signature tone or sound. Some guitar players are longtime users of a specific amp brand or model. Guitarists may also use external effects pedals to alter the sound of their tone before the signal reaches the amplifier.
In Hamburg in 1960, Beatles guitarist John Lennon bought a Rickenbacker 325 Capri, which he used throughout the early days of The Beatles. He eventually had the guitar’s natural alder body refinished in black, and made other modifications including the fitting of a Bigsby vibrato tailpiece and regularly changing the control knobs.[7] Lennon played this guitar for The Beatles’ famous 1964 debut on The Ed Sullivan Show (as well as for their third Sullivan appearance, pre-taped the same day but broadcast two weeks later). During Lennon’s post-Beatles years in New York, this guitar was restored to its original natural wood finish and the cracked gold pickguard replaced with a white one.[7]
It is nice that it starts easy and progresses as you improve, but there are some catches. If you are really good, you will be annoyed at the pace it adds new material. It also can be frustrating when it adds a few extra notes, you are caught of guard, it takes them away, and you have to play through the song a few times to get them back- at which time they catch you off guard again. I wish you could opt to lock them in, or just reveal all.
So you’re thinking about building an electric guitar. Well, it’s a very rewarding experience when it’s done right, and you have the ultimate freedom to make it whatever you want. On top of that, it can be a money saving alternative to the hefty price of a good instrument, if you’re willing to invest your time. Or if you’re just planning on undertaking a fun project, it can certainly fit that bill too.
Harry Rosenbloom, founder of the (now-bankrupt) Medley Music of Bryn Mawr, Pennsylvania, was manufacturing handmade guitars under the name "Elger." By 1965 Rosenbloom had decided to stop manufacturing guitars and chose to become the exclusive North American distributor for Ibanez guitars. In September of 1972 Hoshino began a partnership with Elger Guitars to import guitars from Japan. In September of 1981, Elger was renamed "Hoshino U.S.A.", retaining the company headquarters in Bensalem, Pennsylvania as a distribution and quality-control center.
Adherence to the Past While acknowledging the impossibility of scientifically proving tone, many guitar players will still argue vehemently for a classic Les Paul crunch, or they’ll get ready to throw down if you claim solid-state amps sound better than valve amplifiers. They will concede the point intellectually, but on a more deeply rooted, emotional level, they can’t get beyond their own perspectives. It’s almost like observing fire-walkers at the circus. Your brain may understand how the technique works and how it can be safe. But your heart and nerves won’t let you take the chance of barbecuing your feet.
Like the others, you also have a doubled signal path and like the flanger, you have a short delay. This time you have a bit of a longer delay which causes a more subtle effect. As its name suggests it offers a choir-like effect that adds a certain level of depth to your tone. It also gives it a unique wavering quality that suits a lot of different styles of music.

"Craftsmanship, materials, and dimensional design are combined to make this one of Alvarez' most outstanding models. It has fine projection, sensitive response, and speedy action. The inlaid Tree of Life design on the rosewood fingerboard adds to its graceful distinction. Sides and back of flame grained rosewood are bound with ivoroid. Machine heads are chrome enclosed for longer life. Tuning is fast and precise. Slender mahogany neck with adjustable steel rod reinforcement. The top is select spruce chosen for its acoustic quality."
Daron Malakian (b. 1975) is the lead guitarist for System of a Down. During the System of a Down era, Daron played IC200's and IC300's on stage. During the Toxicity era, Malakian played a variation of the Ibanez Iceman ICX, with custom artwork designed by his father, then a special edition "DMM1" was released by Ibanez. The DMM1 featured more artwork by Malakian's father, Vartan Malakian (b. 1947). After using Gibson guitars for 5 years, Daron switched back to Ibanez and began using an Iceman again.
Some guitarists use identical pickups in each position and still get contrasting sounds from each pickup. Others use different types of pickups, often to balance the tonal tendencies of a particular pickup position. For example, a guitarist might choose a moderate-output pickup in the neck position and use if for clean-toned chords, but opt for a high-output bridge pickup for a louder, more distorted, solo sound. A pickup of that type will probably sound darker than a single-coil, but a player who finds the naturally twangy bridge position a little too bright would welcome that change.
The best choice for ambient miking is most likely to be a good condenser – probably a large-diaphragm type, though a small-diaphragm type will work. Plenty of ribbon mics give good service as ambient mics also, if you have a clean, high-gain mic pre-amp to track them through. And where do you put it? Well, three or four feet back from the speaker will start to get a significant amount of room sound into the mic, but for more-ambient placements, try six feet or more, and experiment with different heights from the floor, far corners, and so on. One nifty way to find a cool ambient placement is to use your own ear like a mic, and stick the mic at the position in the room where the guitar tone sounds the best to you. This is ideally done with another person playing the guitar; cover one ear and walk around the room listening to the sound in different positions. When you hear a sound that really nails what you’re trying to capture, set up the mic right there. Done.
While it is well loved for its HD amp models, it also packs quite a lot of effects (over 100!), applying the same HD modeling technology on actual stompboxes to get them to sound as close to the real thing as possible. The amp modeling and effects section together allow for a wide variety of tones, while the deep controls that you have over each amp and effect parameter allows for even more in-between tones, so you can craft your very own sound. The LED rings add to the unit's overall eye candy and improve the already intuitive interface of the unit. It also houses extensive input and output options, including having its very own mic preamp, so you can use it for a variety of instruments and even vocals. Other features include built-in 48-second looping, tuning and compatibility with Line 6' modeling instrument (Variax) and amps.
Don’t worry about getting the strumming patterns down perfect. You will develop your own strumming style in time. Just try to stay in time. If you have to strum open strings in-between chords, while you switch from one to the other, that’s OK, too. In fact, sometimes, it’s even desirable. It’s what we call ‘style’. You’re main objective right now is learning the chord fingerings, and getting your changes smooth.
A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.
Unfortunately, a simple pickup with a single coil of wire is just as good at picking up stray electrical energy from power supplies and other interference, so it generates a certain amount of unwanted, background noise. Some guitars solve this problem using what are known as humbucking pickups. These have two coils of wire, arranged so they capture double the signal from the moving guitar strings to produce a richer sound. Each coil is wired up so any stray "hum" it captures from nearby electrical equipment is canceled out by the other coil. Most guitars have two or more pickups, which create a variety of different effects. Typically, there's one pickup under the bridge of the guitar (where the strings are supported) and another one slightly higher up at the bottom of the "neck" (the part of the guitar that sticks out of the main body).
Inspiring, light, and upbeat corporate background music with motivational and optimistic energy. Positive and sunny tune for technology and business presentations, travel inspirational Youtube videos, success stories, an unforgettable journey, slideshow. This optimistic and festive track can perfectly fit for any corporate media projects. Featuring muted electric guitar, electric guitar, piano, synth pads, acoustic guitar, drums, bass guitar, piano.
Time controls the length of time between any two repetitions of your signal. It is most often measured in milliseconds (ms). Most delay pedals don’t have a delay-time readout that would enable you to determine exact delay times in milliseconds, so you typically just adjust the Time knob to get an approximate time based on the unit’s available range. For instance, the Boss DD-7 (street $179) has a Mode knob that selects between four time ranges—up to 50 ms, 51–200 ms, 201–800 ms, and 801–3200 ms—and the Time knob then adjusts the setting within the selected range.
It's pretty common that your fingers hurting at first. We all went through it. It does not matter what kind of strings you use. You will pay the price…. Think of it as a Right-Of Passage, or an initiation of sorts. If you think about it, everything in life that is pleasurable comes with a certain amount of pain that must be endured, whether it is financial, such as buying something you really want, emotional, as in love, or physical, such as building your muscles and playing sports.
Rosewood back and sides, abalone (pearl) inlay around top edge and soundhole (but not on top around the fingerboard like a style 41,42,45 would have), inlaid bridge pins. Fancy backstripe of horizontal lines between two rows of diagonal lines (like style 45). Most style 40 models made were hawaiian style with flat fingerboard radius, flat flush frets, high string action, and no bridge saddle compensation. Most popular was the OO-40H (though they did made 2-40, 0-40, 000-40 and 000-40H models prior to WW2). Sometimes these are converted to regular "spanish" style guitar (fingerboard radiused, refretted, neck reset, bridge saddle angled). Made from the 1860s to 1917, then 1928 to 1941, then 1985 to present.

Granite, when quarried in its natural state, also has a crystalline atomic structure which is ideal for sonic transference and has a compression strength of 19,000 psi, and a tension strength of 700 psi—the material these blocks are made of is the fourth densest on earth next to Diamond, Carbon and Quartz that has ideal resonant qualities which will decrease signal loss from your guitar to your amplifier by at least 30%. Utilizing this optimum material allows you to achieve maximum attack, clarity, sustain, note articulation, note separation, harmonics and punch. While the lows get tight and articulate, the harmonics scream effortlessly! Palm mutes, tapping, sweeps, you name it, all sounds so much better.
it is four solders on a guitar on say a les paul needs electricty so two wires pass the electricity through the other two wires are for your pickups the pickups electricity goes through the wires of them , into a potentiometer which is the technical name for the thing under the knob (or two depending on the guitars wiring) .... than into the 3 way and than finally passes out of the guitar and into an amp , pedal or tuner
This years new Guitar World Magazine Holiday Buyers Guide issue is full of great gear for the upcoming holiday season. The amazing new FU-Tone Design Your Own & the Titanium Bridges are featured and well worth checking out. Make sure you pickup a copy of the new Buyers Guide on news stands today and all of the beautiful women photographed don't hurt either!
In late 1929, Martin built a prototype batch of six OM guitars. The very first of these had pyramid bridges and no pickguard. Martin soon realized that with the vigorous strumming required in a band setting, a pickguard would be required. Hence all OMs after the prototype batch had a small teardrop-shaped pickguard. The new OMs were not highly sucessful. They sold, but not as well as Martin had hoped. In 1933 the OM designation was dropped and was now called the "000" model. But infact the 1933 "000" models were the same as the 1933 "OM" models, retaining the OM body style and 14 fret neck. Then in 1934 the standard 000 models were modified to the shorter 24.9" scale (for unknown reasons, as the 12 fret 000 body had a 25.6" scale length its inception in 1902 to its demise in 1931). Yet the OM's longer scale was a major factor in the OM's tone. The strings on an OM must be tuned to a higher tension to get concert pitch. This extra tension translates into more drive on the top, hence providing more volume and tone. The OM's scalloped braces and a small maple bridgeplate give the OM a great sound. Although these features were common to other Martin models of the time, the OM's top brace under the fingerboard was missing. This design is unique to OMs making the top very lightly braced. This does lead to some problems with cracks in the upper bout along the side of the fingerboard, but it also contributes to the great sound of the OM models.
Starting to learn on an electric guitar can be much easier as compared to an acoustic guitar. Electric guitars chords are easier to hold down as the width of the neck is shorter. The strings on the electric guitars are softer than those of acoustic guitars, which is easier on your fingertips if you're just starting out. They can be slightly more expensive than acoustic guitars, especially because other gear is needed to support your playing (i.e. amps, cables, and so on). It's all a matter of personal preference, but here are some of our top choices.
The Teisco brand name stands for 'Tokyo Electric Instrument and Sound Company'. Teisco was founded in 1946 by renowned Hawaiian and Spanish guitarist Atswo Kaneko, and electrical engineer Doryu Matsuda. Teisco guitars sold in the United States were badged "Teisco Del Rey" beginning in 1964. Teisco guitars were also imported in the U.S. under several brand names including Silvertone, Jedson, Kent, Kingston, Kimberly, Tulio, Heit Deluxe and World Teisco. While guitars manufactured by Teisco were ubiquitous in their day, they are now very collectable."
Effects pedals, or stompboxes, are effects units designed to sit on the floor or a pedal board and be turned on and off with the user's feet. Typically, effects pedals house a single effect. The simplest stompbox pedals have a single footswitch, one to three potentiometers (knobs) for controlling the effect, gain or tone, and a single LED display to indicate whether the effect is on or not. More complex stompbox pedals have multiple footswitches, numerous knobs, additional switches and an alphanumeric display screen that indicates the status of which effect is activated. An effects chain, or signal chain, may be formed by connecting two or more effects pedals together.
I was a guitarist for almost 18 years now I am a session musician. For me choosing the best string gauge is one of the most important things a guitarist should know. During those early years our band tends to play on Heavy metal music and if you are using those lighter string gauge its ineffective for those kind of genres. So at that point I have been using .011 or .013 string gauges to gain fat tones and huge sustain. But however as years goes by we tend to play lighter music so I am using .09 and .010 string gauges. For me using those heavier strings for a long time will cause damage in your wrist, after acquiring a carpal tunnel syndrome I have used lighter strings in my guitar.
Tapping, in which both hands are applied to the fretboard. Tapping may be performed either one-handed or two-handed. It is an extended technique, executed by using one hand to tap the strings against the fingerboard, thus producing legato notes. Tapping usually incorporates pull-offs or hammer-ons as well, where the fingers of the left hand play a sequence of notes in synchronization with the tapping hand.
Popularity also was a critical factor in our choices, although we generally passed over a few best-selling reissues or boutique clones in favor of the real deal. So even though the Bubba Bob Buttcrack Tube Overdrive may sound more soulful than an original Tube Screamer, if it’s little more than a copy with slightly upgraded components, it didn’t make the cut.
Healthy forests are vital to all of us, for many reasons. We must preserve these precious resources for future generations. To that end, Oregon Wild Wood strives to provide only salvaged wood, trunks and stumps left behind from old timber harvests, trees that have died and/or must be removed, trees from commercial groves that become unproductive, and even wood salvaged from old buildings and structures. Your next guitar can be a source of pride in yet another way.
Pick-Ups – The pickup is preset underneath the strings, on the body of the electric guitar and it works as a magnetic field. When the metal strings are plucked they vibrate and generate a current that is transmitted by the pickup to the guitar cable and to the amplifier. These may is just a single pickup in a guitar or 3 to 4 pickups depending on the guitar.
Beyond specific favoured mics, a number of engineers also mention more general principles when choosing pairs of mics for guitar recording. Jim Scott and Stephen Street both mention using a 'cheap' or 'bad' mic with a good mic (both give the SM57+U87 combination as an example). "Between the two you can find the ideal sound," remarks Jim, "and you can get brightness and fullness."

A modern popular rock artist known for use of the Super Beatle is Tom Petty and the Heartbreakers, although in the April 2008 issue of Premier Guitar, lead guitarist Mike Campbell revealed that the Super Beatle backline was, on their thirtieth anniversary tour at least, primarily used only as a stage prop, though Petty used his "on a couple of songs." In the group's early days, the Vox equipment was chosen because it was relatively inexpensive in 1976, yet had a handsome appearance. A photograph included in the article showed Campbell's guitar sound was coming from other amplifiers hidden behind the large Super Beatles, which Campbell stated were "a tweed Fender Deluxe and a blackface Fender Princeton together behind the Super Beatle, and an isolated Vox AC30 that I have backstage in a box."
Many Rickenbackers — both guitars and basses — are equipped to be compatible with a “Rick-O-Sound” unit via an extra “stereo” output socket that allows the two pickups (or neck and middle pickup combined/bridge pickup, in the case of three pickup instruments) to be connected to different effects units or amplifiers. Another idiosyncrasy of Rickenbackers is the use of two truss rods (rather than the usual one) to correct twists, as well as curvature, in the neck.
The dual-DSP-powered Helix combines amp and effects models in a large, rugged floor pedal. There are a massive 1,024 preset locations onboard the Helix, organised into eight setlists that contain 32 banks with four presets each. Each preset can have up to four stereo signal paths, each made up of eight blocks populated with amps and effects. With the current count of 41 modelled amps, seven bass amps, 30 cabs, 16 mics, 80 effects and the option of loading speaker impulse responses, there's great potential for sound creation. Line 6 has implemented an easy editing system, complete with a joystick, and - get this - touch-sensitive footswitches offering a shortcut to parameter adjustment; you can even use these with your feet to select a parameter before adjusting it with the pedal treadle! There are some great sounds here, especially when you get beyond the factory presets and shape things to your own taste. The Helix's advantage lies in its comprehensive input/output and signal routing ability, which can facilitate just about any guitar-related studio or onstage task you can think of. However, if you don't need all that connectivity, and want to save a bit of cash, there's also the Line 6 Helix LT.

While guitar straps come in a variety of different materials, El Dorado only uses leather in theirs, so rest assured you're getting exceptional quality here. If you're going for a cool western persona, try starting your search with the top-rated Vintage Hand-Tooled Leather Guitar Strap, featuring classic basketweave embossing backed with genuine sheepskin shearling. This hand-engraved strap is finished with a solid nickel buckle and loops for a truly sophisticated look you'll be proud to showcase.

All electric guitar strings are made using steel, nickel, or other magnetically conductive metal alloys since they’re essential for transmitting string vibrations to the magnetic pickups. The type of plating or coating applied to the steel alloy has a significant impact on the strings’ sound. Here are some general tonal characteristics of the most common types of strings:

From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!

ESP LTDs are a ripoff. All the money goes into the finish and nothing else. Cheap hardware and poor electronics. All of the LTDs I've ever owned couldn't stay in tune worth a damn, have noisy, pop-y switches and crappy pots. I have the Viper 400, and it's an overrated turd. Luckily I got it for a steal. Thing can't stay in tune AT ALL. I will be replacing the alleged Grover tuners with real Grover lockers. That still doesn't solve the issues with the soft finish and ultra-noisy electronics. Plus it has a humpy neck, a cracking neck joint (like all of my LTD set-necks) and the frets were likely leveled by a monkey considering the quality.
Several notable ranges of similar guitars were produced with different finishes and features; whilst some companies lumped all variants together with a single model name - i.e. a Fender Stratocaster is a Fender Stratocaster, irrespective of it's finish, in many cases Harmony split it's models, giving a different model designation depending on finish, inclusion of a tremolo etc.
Squier has now seen fit to introduce Fender's revered '72 Thinline to its own range, and it looks the business, with white pearloid scratchplate, finely carved f-hole and Fender- embossed humbuckers. While you'll find the gloss-finished modern C neck across much of Squier's Vintage Modified range, you're unlikely to find tones quite like the Thinline's anywhere else, certainly at this price. Cleans from the neck and middle positions are punchy and persuasive, not dissimilar to fat P-90-ish single coils, but flicking over to the bridge humbucker yields a burly, resonant voice that screams for big open chords and an overdriven valve amp. That's why it's one of the best electric guitars for Indie and alt-rock players.

The modern "tone block" is a design-based marketing approach from EBMM starting in their guitars a few years back. It originally involved routing out an alder body, fitting a block of mahogany from just behind the bridge to the neck join and applying a top to the guitar. It is an alteration of the design and some purists believe they hear a difference in the tone of the guitar versus plain alder bodied or mahogany instruments. 

{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: fernandes","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"fernandes","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Up for sale, a 1956 Fender Deluxe in excellent condition and in perfect working order. A previous owner also very lightly added their ID number to the faceplate between the On switch and Tone knob. It's an example that will satisfy collectors and serious players alike, and the amp has recently been given a clean bill of health, ready for your next gig or studio session.
I said to the guy who greeted me at the door: "I'm looking to my buy very first acoustic guitar." And felt a little nervous not knowing anything about playing. Handed him my note card of guitars and he led me into a practice room where he brought the guitars I was interested in and played them for me (since I had zerrrrrooo experience) so I could hear the tone of the guitars. He was very professional, and also took his time making sure that I picked a guitar that I liked. Even gave me a little history about where they are made and how the company sources their wood, etc. Very nice! I forgot his name, but he had curly blonde hair. (If you read this, Hi! And thank you).
You are right, we will have the whole guitar amplifiers section of out website completely revamped in the next few weeks! We made vast content improvements on all other sections of GuitarFella and now it is time to work on the amps. Thanks a lot for the remark and make sure you check us out in 2-3 weeks, I guarantee you that you will like the results!

Overstock SaleNew ProductsVacuum TubesSpeakersAccessoriesAmplifier PartsBooks & DVDsCapacitor Amplifier SetsCapacitorsCoversEffect Pedals & PartsEnclosuresFootswitch BoxesGift CertificateGrill Cloth, Tolex & PipingGuitar PartsHardwareJacks & PlugsKeyboard PartsKitsKnobsLuthier ToolsMaintenance ProductsPMT Tone ModsPotentiometersPower AccessoriesRadio & Antique Equipment PartsResistorsReverb TanksSchematicsSemiconductorsSpeakersSwitchesT-shirts/GiftsTech SuppliesTerminal Boards & StripsTransformers & ChokesVacuum Tube AccessoriesVacuum Tube Amplifier SetsVacuum TubesYellow JacketsZero Glide Nuts


{"id": "113668304", "categoryId":"site5AAG", "name":"Vintage 1984 1984 Ibanez Destroyer I Red Solid Body Electric Guitar", "pageUrl":"/Used/Ibanez/Vintage-1984-1984-Ibanez-Destroyer-I-Red-Solid-Body-Electric-Guitar.gc", "thumbnailUrl":"https://media.guitarcenter.com/is/image/MMGS7/NonExistingImage-00-180x180.jpg", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"", "priceMin":"", "priceMax":"", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"0", "brand":"Ibanez", "reviewStarImageUrl": "https://static.guitarcenter.com/img/brand/gc/cmn/Sprit-Sm-Stars.png", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"new", "discontinued":"1", "onOrder":"0", "clearance":"0", "canBeSold":"0", "accessoryCategories":"site5LFMIC,site5LAAA,site5HBA", "stickerText": "", "isVintage": "1", "outletonly": "", "checksum":"", "priceVisibility": "", "itemType": "Vintage"}
Three full steps down from Drop D. Utilized by Dead by April (on some songs), Metallica in the song "Invisible Kid" from St. Anger, Asking Alexandria (G#) on their self-titled album, Damien Deadson, Love and Death, Architects and The Acacia Strain. Staind also uses this tuning (but with the 2nd string tuned up 1/2 step to emulate a 7-string guitar), as well as several other modified variations of this, such as one in which the 5th string is also dropped from D# to C#.
Acoustic guitars that have been fitted with a pickup can be recorded using the same techniques as standard electric guitars when plugged into an amp. Interesting sounds can be created by mic’ing up an acoustic guitar and sending the sound through an amp. This can be done live – although you should be aware of feedback – or a previously recorded acoustic track can be re-amped and used exclusively, or mixed with the original acoustic track. You can get some really gnarly and original ‘electric’ sounds with creative use of overdriven acoustic guitar; it’s especially good for slide playing.
I have a epiphone sg 50th edition and it does great by me in all I do. I play a lot of 60's music and otherwise all I want. It's very versatile and not to mention the cherry red wood grain finish makes it looks really awesome. Everyone I've ever met has bragged on it and I've been offered all kinds of guitars from Washburns to fenders. Just recently I went to a old guitar player of 30 yearsiin my grandfathers neighborhood and he absolutely loved the tone and playability. He said the only thing it might need to make it better was a professional setup which I'll soon be getting. When I first got it I complained a lot that the strings were a bit harder to push down due to the longer scale of the neck (the neck on it is pretty long) however. If you' work with it for about 2 days off and on its no problem. I love epiphone and judging from what I've played in ibanez guitars I might soon invest in one of them.
   I am now building several models which I offer as my signature work. I've always had a special affinity for archtop guitars, but as you'll see in this website, I will go wherever the creative impulse takes me. The instruments I am building now are a distillation of the best design ideas I've found in classic instruments, re-imagined and evolved into higher form and function, as fine tools for discerning artists. 
Its very obvious very few on this list have never picked up a guitar in their life as this looks like a what brand does my favorite band play list... Considering Gibson these days are garbage and only were good for a few style to begin with no way they're number one... Fender has very solid build quality, but to diversify them to play numerous styles takes heavy modification. As far as electric are concerned there is a number that can top the list, as schecter, esp and Jackson are too low on the list and I've heard good things about rickenbacker. Ibanez is also excellent. Its really a toss up for me...I haven't played much esp do I phased them out...I have extensive time with Ibanez schecter and Jackson... Ibanez is gone because the build quality is no better and the playability is pretty much the same as a Jackson but the Jackson gives you far more bang for the buck... As for schecter and Jackson they put out some fully loaded guitars that are only going to rock you maybe a weeks ...more
Lawsuit Takamine F375s Hand built in Japan and still in excellent vintage condition! Build type is Rare Exotic Tone woods series Jacaranda Brazilian Rosewood back-sides-fingerboard & headstock overlay JUST Gorgeous. Its workmanship is really top shelf by any standards, We installed and set up with Martin Marquis 80/20 strings 12's, as well as setting this guitar up with a New bone nut & saddle, Condition is very good with a few minor hard to see scratches on its back you have to look closely sometimes at an angel ( clear coat only not threw to wood ) general play here and there as any 37 year old guitar that has been played would get... dinks and such but nothing major to detract from its obvious outward beauty, This example has an excellent neck its 1-11/16th's at the bone nut, fingerboard is very good as are the frets at 90%, its straight and has a nice meaty feel, has the Martin design detail of the Diamond Volute on back, original tuners are excellent as well, a warm vintage vibe to this 37 year old vintage Gem. Tone is rich with good volume she Sings well!!! JVG Rated 9/10 higher if it wasn't for the few minor clear coat scratches in its clear coat not to the wood that I can see more like swirls and such may be possible to fine grade 3000 wet sand and polish out its possible if it doesn't sell soon when I get the chance I'll do it, its a commitment because it may not sand out alone it may require a few thin clear lacquer applied and buffed out to cure it forever if so a guitar of this caliber deserves the attention.. ( the price will go up after I do that work ) and that really doesn't have to be done to make this guitar just very good -excellent vintage it would bring it very close to mint!.... aside from the few minor scuffs this guitar still qualifies as vintage excellent right now, just thought I would point those out. So to be clear about this listing the way you see it now is the way it is offered.Its a F375s and not the EF375s yet This guitar has a factory installed transducer type pickup installed and it sounds wonderful, Its said to have been installed by original owner in Tokyo by Takamine shop its a very clean job I call it CLEAN where they do not make extra unnecessary holes for output jack instead they use the END PIN hole and its a combination strap pin and or output jack, So this guitar is either Acoustic or Electric really nice in deed in SUPER Condition well above average. This beautiful instrument comes with its original hard shell case it to is in very good vintage condition its heavy duty molded type with plush black interior all functional fully. This is the total package. Contact Joe to buy: jvguitars@gmail.com .
The prototype was introduced at the 2011 NAMM exhibition. Bolan is seen holding the instrument on the outer gatefold jacket of T. Rex, his first album after shortening the band name from “Tyrannosaurus Rex”. The guitar was stolen from Bolan in London, and for the last months of his career he was using a wine-red 1970s Les Paul Standard. Gibson announced the availability of the Marc Bolan signature Les Paul in February 2011.
Postscript: About that “capacitor type doesn’t matter” statement: Them’s fighting words in many online forums, especially in the stompbox realm. You’ll often see the inclusion of some rare “mojo” capacitor cited as a selling point for a particular product. I used to think I sometimes could hear a difference—until I built a couple of effects with quick-change sockets for comparing cap types. The audible differences were negligible, no more meaningful than the variations between two caps of the same value and same type. My advice is, if someone tries to sell you anything based on cap type, proceed with much caution. I now strongly believe that cap type is of no importance, at least in guitar and analog stompbox applications.
Note: Youpi Choupi's answer calls my answer below into question by pointing out that classical and flamenco guitars are acoustic guitars. He is correct in this of course, they are all types of acoustic guitar. However, most of the time when someone says they play "acoustic guitar," they mean the commonly used steel-stringed acoustic that most rock, folk, country and other artists play, and I believe this was the intent of the OP when they asked the question. Hence, an answer simply pointing out that Spanish guitar and acoustic guitar are both acoustic guitars would not have been a helpful answer.
Electronics.  If your guitar comes with a pickup system (either from the factory or aftermarket) we will test it before it ships.  Poor sound, uneven string balance, and just plain component failure is all checked & corrected so you don't have to fool around with it. If your guitar's system requires a battery inside the guitar, we may remove it prior to shipping.

Anyone who’s shopped for any kind of guitar recently knows that not only has the number of brands increased, the number of models offered by most major manufacturers has increased. Between Squier (Fender) and Epiphone alone, you’ll find about 20 different models under $200, and that’s not even counting the different color options. When you add newer brands (some of which seem to exist only on Amazon), you could easily end up with more than 50 different models—far too many to run past a testing panel because, as we learned from our ukulele tests, when you have more than about 10 instruments to test, it gets tough to sort them all out.

The MG-100 has so many features, its hard to name them all. But, here we can list: 13 classic amp models via NUX's TS/AC technology, vintage 3-band passive EQ modeling for every amp model, 6-band graphic EQ designed specifically for electric guitar (120hz,250hz,750hz,1.6khz,3.2khz,6.4khz), 11 cabinet models, seamless and quick preset switching , loop sounds can be played with drum machine, rhythm beat synchronously. The aux in jack makes it easy to practice along with MP3, CDs and other inputs. Large color TFT LCD panel (160 x128), graphic interface making the overall operation easy and intuitive. A total of 72 presets, 36 factory + 36 user presets.

I wanna weigh in, I’m just an average player but having one of the best luthiers around and talking to them really gives you an idea of what quality your getting from a guitar. I play a martin DC 16gte, my singer plays a Chinese knock off Taylor. No one can tell the difference when he switched to the real genuine 314 CE Taylor (basically made the same way as the Chinese one), and we get no complaints about either guitar. Save your money, (buy quality) or buy the Chinese knock off and find it’s made the same and it will make you the same money playing and feel just as good in your hand as the 1000 dollar plus Taylor. Conclusions for Taylor or martin fans is don’t go name brand cause they (known or unknown) swear by them, is all personal preference, try everything in every price range find what’s right for you. My $750 DC 16gte Martin was right for me. My singer the 914ce Taylor Chinese knock off (327 bucks new) suits him better than his 1200 dollar original Taylor 314ce.
The F-55 was identical to the F-50 except for the addition of a bridge DeArmond humbucker, plus the attendant three-way toggle on the cutaway horn and a second set of volume and tone knobs flanking the treble f-hole. The F-55, too, had a Martin “M” trapeze tail. This series began with guitar #279831. Some 1,700 F-55s were made from mid-’62 to the summer of 1965.
These guitars appear to have lasted through 1989 or so. In 1990 the Stinger line shrank dramatically. Three guitars and two basses were listed in the Guitar World 1990-91 Guitar Buyer’s Guide. The three guitars in ’90 were the SSX, SPX and SSL. These were basically Strats (gone were the arched tops). The SSX now had three single-coils and fixed bridge/tailpiece. The SPX offered two humbuckers with a coil tap switch. The SSL had one humbucker and one single-coil, with a tap on the ‘bucker, and a traditional vibrato.
I purchased a Lyle model A690 recently from an old man in northern California who had gone blind and developed arthritis and didn't feel like playing anymore. He mentioned in passing that he had found (?) The guitar somewhere. The case was thickly covered in dust and pretty much rusted toast, but the guitar is immaculate, looks brand-new with the exception of the tuners, rusted tight. The serial is #480 so I guess its fairly old, but how old is my question? A weird aside; in the case was a handful of fender-style medium tortoise-shell picks monogrammed Eddie Kramer. Does that ring a bell for anyone? Any and all information would be appreciated! Thanks!

Next up, Tolerances. The tolerance refers to the accurate rating of the pots ohm, so if it's a 250k pot, then it will be accurately rated at a tight tolerance of around +/-5% to 250k, a true rating. Some low quality pots can creep wildly away from the ratings, you'd be surprised. I've removed CTS pots from US and MIM Fender guitars for example, that were incredibly inacurate. 250k stamped pots that were not even 200k, and also in other cases past 300k. So, why does that matter? Well if for example we're referring to a single coil equipped guitar like a Stratocaster, they recommended a pot ohm value of 250k in both volume and tone positions. If a lower quality pot states 250k but actually reads much lower, perhaps 200k, or even substantially higher, it could result it a darker or brighter tone respectively, than what would bring out the best in the guitars pickups. Quality pots like the CTS 450 series or TVT I have come to trust, have super tight tolerances, +/- 7% and most cases even tighter +/-5%. This accuracy is worth it, a pickup manufacturer sets out to design a certain model of pickup that will sound it's 'best' (obviously this is subjective), optimal is probably a better word, for a certain pot rating. If you're fitting a harness with tight tolerance, accurately rated pots then chances are you're going to be getting the best from your pickup set. That's the important bit for me.
Description: Body: Mahogany - Body Size: Baritone - Neck Attachment: Bolt - Neck Wood: Canadian Hard Maple - Fingerboard: Rosewood - Frets: 24, Jumbo - Inlay: Custom - # of Strings: 7 - Headstock: 4+3 - Bridge: Tone Pros - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: EMG HX-7 - Pickup Configuration: H-H - String Instrument Finish: Black
Multi-effects units are exactly what the name implies—single units that offer many different effects and allow those effects to be used singly or in combinations simultaneously. Most will offer just about all the effect types discussed in this guide and many more. Typically they include dozens if not hundreds of effects presets—combinations of effects and effect parameters designed to achieve specific sounds with the touch of button or footswitch. Most also allow you to also save your presets for instant recall.
Two of the strongest reasons to buy an acoustic guitar are user-friendliness and price. Some musical instruments are prohibitively expensive for beginners, and they’re difficult to learn, too. Not the acoustic guitar. Acoustic guitars are easy to learn, easy to carry, easy on the ears. And you can buy an acoustic guitar for an affordable price. The most difficult challenge in purchasing an acoustic guitar is finding the ideal fit for you. In this shopping guide, we will discuss some important elements to consider when browsing the acoustic guitar market.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Frets: 24, Jumbo - # of Strings: 6 - Headstock: 3+3 - Bridge: Floyd Rose Special Tremolo - Cutaway: Single - Hardware: Satin Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickup Configuration: H-H - String Instrument Finish: Transparent Amber Sunburst, Transparent Black, Transparent Red

Now lets talk amps. I have always felt like you could hand me a great guitar played through a bad amp and I would get a bad tone. However, I can make a bad guitar sound decent through a good amp. The amp, in my opinion is the most crucial part of your tone. I always prefer tube amps that deliver a much warmer, natural sound then the solid state counterparts. However if you are play jazz or something that requires a clean crisp sound, a solid state amp good be great. All the great rock legends used tube amps such as Marshall Plexi’s, Vox AC30, Hi Watt, Fender Twins, Fender Bassmans etc. Now days they make all kinds of boutique amps that are modeled after these classic amps. Matchless is my amp of choice which is loosely modeled after the Vox AC30.
Besides its classic vibe, the best part about this guitar may be its Broad’Tron pickups. These were designed specifically for the Streamliner, and are known for their throaty midrange, booming lows and sparkly highs. They’re also louder than Gretsch’s other popular pups, the Filter’Tron, so push them hard and they’ll snarl and scream. Dial back the volume knob, however, and you’ll encounter the warmth and rounded tone for which Gretsch hollow-bodies are known.
Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
The frets are the little metal pieces that are installed in the instrument's neck. Frets do not make a significant difference in the sound of the instrument. They come in various sizes and materials. If you're just starting out, we recommend choosing Medium size frets made of Nickel-Silver. For a more scalloped feel, we recommend Extra Jumbo size frets. For increased durability (wear-and-tear), we recommend Stainless Steel frets. Some customers have reported stainless steel frets to be very slippery and brighter sounding when compared to nickel-silver frets – this could be a good, or a bad thing depending on the player.

Patti Smith famously described Tom Verlaine's guitar sound as "a thousand bluebirds screaming." Television's leader soaked up the flavor of favorite records by John Coltrane, the Stones and the Dead – then synthesized them into something entirely new on the band's 1977 debut, Marquee Moon, spinning out endless fluid solos in concert with fellow guitar aesthete Richard Lloyd. Verlaine has kept a low profile in recent decades, but he remains a model for generations of guitarists with a taste for both punk violence and melodic flight.
Like 39% of the people said, they are simply the worst. The first guitar I owned was the Ibanez Gio, I thought it was amazing. I play it every now and then, but not too much anymore. For its price, I think it is the best starter guitar, 10 times better than any first act. I owned a first act, it was the worst guitar of all time. Me finger killed after playing it because the strings are so hard to push down, the frets don't even stay attached to the guitar. All beginner guitarist, don't get first act.
:::I just bought one of these guitars at an auction. In Oregon U.S.A. It is a plank, with sunburst finish, 3 chrome toaster style pickups with one cover missing. The varnish has cracks in it like every other old Vox I have seen that date to the sixties or earlier. It has a white pick guard with 3 chrome knurled knobs and an old style switch that turns (not a flip switch) but is missing the knob that I assume is chrome like the 3 volume knobs. I haven't put strings on the guitar yet so I don't know if they are all volume or 1 volume and 2 tone. The roller/tremolo has VOX stamped in big letters and under that it says PAT.APP.FOR in smaller capitol letters. It has a plastic cover plate on the back that is stamped, Made In England. The neck is 19 fret with a fret just under the nut that has no use, as the string would never touch it and the neck is attached with a metal plate. Tuners are a single strap with gears steel not brass with plastic knobs. Just under the tuners on the back the headstock are the numbers 64523. A green VOX decal along with Shadow JMI Dartford Kent on the front. I was suprised to find this guitar, as I had never seen or heard of it before. I can't wait to play it and see how it stacks up to all the other VOX guitars I have and have played. Wish I could find out more about it but this is as close as I have come, so far.

I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring
What started out as Gibson’s daughter company that was tasked with producing affordable guitars, has grown into a giant. Not so long ago, Epiphone was the brand you turned to if you wanted a legit Les Paul but didn’t have the money for Gibson one.Today, things are vastly different. Gibson stepped up their game across the board, producing some of the absolute best guitar on the market.
Anyone without the skills and ability to shred well technically should not be on a top list ever. Any top list without Buckethead is incomplete since he has the highest ability. Anyone that says Buckethead can not play with soul/feel/emotion/blah blah blah are misinformed and have not listened to enough of him them self. Buckethead has over 50 albums so it is hard to find the good stuff since a lot of his work is experimental, but his good stuff is the best stuff. Oh wow just before pushing post I just found yet another awesome older Buckethead song… Brazos.
The Red Hot Chili Peppers always knew how to rock a party; it took John Frusciante to turn them into an arena-packing band with a sound they could call their own. Frusciante is a remarkably elastic stylist and a gifted sculptural arranger who pushed the Chilis to explore new worlds without getting in the way of their funk-pumped energy; he beefed up their sound with both well-placed fire (the volcanic, Hendrix-style solo on “Dani California”) and remarkable elegance (the indelible opening chords of “Under the Bridge”).
{"product":{"id":"361014","stock":"","price":"155.00","name":"Vintage Hand-Tooled Leather Guitar Strap","download":false,"sku_id":"","checksum":"82996536150","rep_id":"site1prod361014","sku_rep_id":""},"category":"Fretted Instrument Accessories & Parts","pageName":"product_detail","subcategory":"Fretted Instrument Accessories","dept":"Accessories"}
PRS: One of the best guitar brand one can go for (if they don’t want to go for the custom-built route). Their guitars look beautiful and sound buttery smooth. They have the most beautiful looking tops and inlay among non-custom guitars. The craftsmanship and attention to detail on PRS guitars is just exquisite. Of course they do have their custom shop called Private Stock and the Private Stock guitars are so gorgeous and meticulously built that anyone who sees them will be awestruck by their beauty, not to forget the sound of those guitars are like the voice of angels.
Sometimes called an auto-volume, these pedals work the same as the wah-wah pedal.  The effect functions based on your picking dynamics, but instead of a change in tone, you get a change in volume.  The effect will have no volume when you pick, but will then swell up to audible levels.  It masks your pick attack and simulates the sound of a bowed instrument.
BC Rich is a fashionable brand of guitar that has been available since the year 1969. This is an American brand of acoustic & electric guitars & bass guitars. The brand produces 6-string electric guitars mahogany or basswood bodies. This brand is not as popular as other brands of electric guitars as it specializes in guitars for heavy metal & hard rock crowd. It is the choice of only those guitarists who are looking for an instrument that looks sound as edgy as possible. It offers trendy appearance and classic style of playing an electric guitar. The starting price of this brand of guitars is 29,000 INR approximately.
I am not a real musician but I feel like one whenever I go in there. I bought my guitar there a few years ago. I have taken it and a travel guitar in there to get re-strung and Pat has always been so helpful and engaging. I follow his FB pages and saw him perform an original song "Will you Take My Name". I was so blown away by the song that I actually proposed to my wife by singing a version of that song. (His version is much better!). He has built a great following in a short time and has a nice selection of guitars and accessories. I really like his frequent FB posts of him showing a guitar he is working on, or a song he sings. Also, he features a lot of customers singing and playing whenever they stop in. This store has a great vibe. If you are in the area, stop in even if you don't anything, you will have fun. And if you need something, well then you've come to the right place!
1960's Harmony H-54 Rocket 2 Redburst- Here's a excellent example of rock-n-roll to jazz all rolled up in one. For not much coin the Harmony Rocket was a great choice of hundreds of thousands from music stores to Sear Catalogs. This guitar is in very near mint condition as you can see. We repaired a slight crack at input jack common area. Yes, someone years ago stepped on the cord. We professional glued it from the inside and it's stronger than new. All that shows is a slight line about 1 1/2" long on bottom edge. Anyway, the Rocket 2 is getting harder and harder to find. Two DeArmond Gold Foil Pickups power this baby. It's all original, except for the pick guard, which no one can detect. Condition other than slight repair is a 9 3/4 for this great 50 year old beauty. Guitar comes with period clip board case. SOLD
The envelope filter is also known as an auto-wah.  It functions sonically like a wah-wah pedal but uses the strength of the signal to control the sweep of the frequency.  Typically, control knobs allows the player to set the amount of wah to interact with picking, so that the guitarist can dynamically control the effect without using a rocker to engage the filtering.
Les Pauls are all about that heavy metal feel and heavy weight. When they were first introduced, they had two p-90 single coil pickups. Today, they use double humbucker pickups for outputting a thick, sustainable sound. Like Tele and Stratocasters, they have a single cutaway shape. Heavy rock musicians love Les Pauls. Fender offers an affordable range of Les Paul electric guitars compared to Gibson, but Epiphone by Gibson is a hot item for the beginners.
The standard tuning, without the top E string attached. Alternative variants are easy from this tuning, but because several chords inherently omit the lowest string, it may leave some chords relatively thin or incomplete with the top string missing (the D chord, for instance, must be fretted 5-4-3-2-3 to include F#, the tone a major third above D).
In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.

{"pageName":"[gc] pdp: old kraftsman 196s k3 solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop6":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: guitars: electric guitars: solid body electric guitars","products":";113469598;;;;evar65=Vintage-Guitars-Old Kraftsman","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}


You can simulate any sound of three pickup guitar with two pickup guitar and vice versa, the only problem is getting it with proper wiring or customizing it. Even they will not sound the same may be close enough for your application or even better. And don't forget about potentiometers problem. The 250K potentiometer will cut some frequencies from humbuckers while 500K make singles brighter than they are by default. It may be not a problem or critical to choosing favorite tone :D
The MS-50G lets you use up to six of effects simultaneously, from its large pool of digitally modeled effects (47) and amps (8). And all of the settings and parameters are adjusted via its intuitive interface, albeit with just a single footswitch. You can save each preset you create or edit, just store them into the pedal's 50 memory banks. This flexibility gives you an unprecedented tone options. Other noteworthy features include its built-in chromatic tuner and its versatile power options, which include 2 x AA batteries or via a USB power source.
The pickup selector switch as the name implies allows you to select which pickup produces sound. In some cases, it will be your neck pickup, bridge pickup or a combination of both. In other cases, such as the Fender Stratocaster there are three pickups which utilize a 5-way selector switch. This also allows each pickup to be isolated or used in combination.
In the entry-level market, brand-name guitar companies are usually forced to make their guitars with cheaper materials. There is a simple reason for this. Most major brand-name companies have a brand owner (sometimes an American company). That company buys from a factory in China, and in Australia they will have a distributor who will sell to a retailer (your local music store). It’s pretty easy to see why they can be forced to use cheaper materials. There is a lot of price pressure to get a guitar manufactured at a low enough price for everybody to take their cut of the profit down the chain.
This is a good list although after owning most of these brands or at least having played all of them, I would re-rearrange the order. Gibsons although a good guitar are simply no longer the quality of Taylor or Martin. They are lagging behind these guys. Yamaha and Epiphone despite online "reviews" are also not near a Taylor or Martin for that matter. So I would drop Gibson, Yamaha, and Epiphone down the list, and although Seagull makes a decent guitar, they are no better than Blueridge, so I would drop them down and bring Blueridge up. Of course this is all subjective, but here is my list re-ordered for what its worth.
The string is not the only thing that vibrates. The guitar itself vibrates, and how it vibrates depends on the tone wood. The pickups are attached to the guitar and therefore they go along for the ride. In other words they vibrate under the strings which adds to the disruption of the magnetic field. So the environment the pick ups are placed in affects the tone. A good example is Neil Young's Old Blackie, which has an aluminum pick guard on it which gives it a unique.
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
{"pageName":"[gc] pdp: epiphone 1967 ft9 el dorado acoustic guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: acoustic guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps","prop6":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks: straps: guitar straps","prop3":"[gc] shop: guitars: acoustic guitars: 6 string acoustic guitars","prop4":"[gc] shop: accessories: fretted instrument accessories and parts: fretted instrument accessories: straps and strap locks","products":";113478791;;;;evar65=Vintage-Guitars-Epiphone","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
Here’s an interesting (they’re all interesting to me!!!) guitar that shows the evolution of Matsumoku made guitars.  Even the earliest solid body electrics that came out of the Matsumoku plant were made of solid wood and displayed really good wood craftsmanship!  Lots of start up companies went to Matsumoku in the early days because the plant had proper wood drying facilities (if the wood wasn’t dried properly, the guitars often became seriously messed up during the import trip across the ocean).
Players perceived a loss of the initial high quality of Fender guitars after the company was taken over by CBS in 1965. As a result, the late-1960s Stratocasters with the large “CBS” headstock and (from the mid 1970s) the 3-bolt necked models (instead of the conventional 4 bolts) with the “Bullet” truss-rod and the MicroTilt adjustment system fell out of fashion. However, many blues-influenced artists of the late 1960s soon adopted the Stratocaster as their main instrument, reviving the guitar’s popularity. Also, so-called ‘pre-CBS’ Stratocasters are, accordingly, quite sought-after and expensive due to the perceived difference in quality even compared with contemporary post-CBS models. In recent times, some Stratocasters manufactured from 1954 to 1958 have sold for more than US$175,000.
The best way to get this sound out of an Octavia is by using the neck pickup on the guitar and by experimenting with the tone knob to get a more pronounced octave effect. Some other famous Hendrix tunes using the Octavia are “Who Knows” and “Machine Gun” from Band of Gypsies. If you want to put together a Jimi Hendrix pedal board, the Octavia is a must. There are many great reissues of this pedal on the market, but if you get a chance, like fuzzes, try a few of them next to each other. Even a few of the same pedal, as they often sound very different. One may have more of an octave effect, or be warmer sounding etc. This is due to the use of the transistors that can often have slightly different values that can make big tonal changes.
Unabashedly brute class, with typical German overbuilding, the Schallers shown here are the Incredible Hulk of the bunch (Fig. 17). At a hefty 272 grams, they have the might to get noticed when you fasten them to your axe. If you have a guitar with a tiny headstock, you’ll hear and feel a difference with the Schallers. Whether or not you like the change is subjective, and it depends on the makeup of the rest of your guitar.
If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.
Negative feedback controls the accuracy of the output stage's reaction to the signal coming from the preamp stage, and reduces distortion at the point where it's fed back into the signal chain. Too much negative feedback causes a sluggish amp response with insufficient attack, while too little negative feedback produces an exaggerated and harsh upper midrange response with an overly aggressive pick-attack sound. The Presence control is thus a useful contributor to the overall tone production of the amp.

Paul Kossoff, of Free and Back Street Crawler, favoured a 1959 Les Paul Standard. In 2011-12, Gibson’s Custom Shop made a reproduction of Kossoff’s Standard, featuring a so-called “green-lemon” flametop, two-piece carved maple top, mahogany body and neck, Custom Bucker humbucking pickups and kidney-bean shaped Grover tuners similar to those Kossoff had installed on the instrument. 100 Kossoff models were made to resemble the guitar at the time of Kossoff’s death in 1976, with another 250 in a VOS finish.
A tremolo effect simply alters the volume of a signal at a preset interval, within a preset range. Some amps have this effect built in, and in some cases it’s called vibrato (a misnomer that caught on long ago and has stuck around to this day). Tremolo sounds much like hitting a note and then turning your volume knob up and down rapidly. Most tremolo effects have two controls: speed and depth. Adjusting speed changes how rapidly your volume fluctuates. Adjusting the depth controls the range of volume from loud to soft as the tremolo fluctuates.
A bass stack may use a single speaker cabinet (e.g., the huge 8x10" cabinets widely used by hard rock and metal bassists). The 8x10" cabinet is often provided as "backline" equipment at music festivals; this way, all the bassists from the different bands can use the same amplifier and speaker cabinet. This reduces the transition time between bands, because the roadies do not have to remove the previous band's bass stack and bring in the subsequent band's stack. Using one 8x10" as backline gear for an entire music festival also makes the transition easier for the audio engineer, because she can have an XLR cable plugged into the amp head's DI unit output (to get the bass amp's signal so that it can be mixed into the sound reinforcement system mix) and have a mic set up in front of the cabinet, to capture the amp and speaker cabinet's distinctive tone. The 8x10" cabinet is widely used by heavy metal music, hardcore punk and psychobilly bassists, as these genres use a loud onstage volume. Some metal bassists, such the bass player for death metal band Cannibal Corpse, use two 8x10" cabinets for large concerts in stadiums or outdoor festivals.
Dobro was founded by John Dopyera and a brother after he left National Guitar in 1928. The history of Dobro and National is long and complicated. Dobro merged with National in 1934. They contracted with Regal to build their guitars and for a time Regal was the exclusive builder of resonator guitars. They lost the rights to the names during World War II which led to a number of other names. The Original Musical Instrument Company was the last name used with Hound Dog being a brand of resonator guitar when Gibson eventually purchased them in 1994. Gibson currently sells Dobros (single cone, spider bridge resonator guitars) and Hound Dog brand guitars. Epiphone has also made resonator guitars.
Yamaha is famous around the world for its incredible, quality, instruments. Its electric guitars are no exception. The Yamaha Pacifica Series PAC112V Electric Guitar, Old Violin Sunburst is another example of Yamaha's on point production. This guitar has a solid alder body, a maple bolt neck, rosewood fingerboard, and a five-position switch with coil tap. Plus there's the tremolo - a vintage tremolo with block saddles.
Phasers – Sometimes called “phase shifters,” these pedals take the “copy” of the guitar signal and put the waves out of phase with each other before mixing them back together. Since those sound waves are no longer in sync, they’ll interact in unique ways, creating futuristic whooshing and swooping sounds. Look back to late 1970s and early ’80s rock music, and you’ll see lots of examples of phasers in action.
So fun...So dope...I am sure the game is really great, and I know that it has gotten a lot of acknowledgement, but the reason I give it only 4 Stars for me personally is because I test every single new game out that I purchase with my 60 Year old Parents to see if they are interested in it because if they are then we usually play the game together and watch the stories unfold....This game this game OMG this game I have been waiting for since PlayStation 3 I'm so glad I was able to play this let me tell you get this game if you have PlayStation or if you want to play it exclusive for PlayStation or if you want to just see the whole franchise get a PlayStation and play and I highly recommend getting a PlayStation 4 Pro you will not be disappointed with this game.
Guitar Tricks is a step-by-step learning system that’s designed to make learning guitar easy. The Guitar Fundamentals level 1 training curriculum has been totally reworked, improved and only recently re-released. Nothing else is as beginner-friendly as Guitar Tricks. In addition to working your way through the fundamental lessons of the Core Learning system you can explore great songs arranged with beginners in mind.
The open strings of a guitar can be tuned to microtonal intervals, however microtonal scales cannot easily be played on a conventional guitar because the frets only allow for a chromatic scale of twelve equally spaced pitches, each a semitone apart. (Certain microtonal scales, particularly quarter tones, can be played on a standard guitar solely by adjusting tunings, but the distance between notes on the scale makes it somewhat impractical.) It is possible to play microtonal scales on a fretless guitar, to convert a fretted guitar into a fretless, or to make a custom neck with a specific microtonal fret spacing.
Reverb creates a sense of space, but it also increases the perception of distance. If you need something to appear at the front of a mix, a short, bright reverb may be more appropriate than a long, warm reverb, which will have the effect of pushing the sound into the background. If you need to make the reverb sound 'bigger', a pre-delay (a gap between the dry and wet signals) of up to 120ms can help to do this without pushing the sound too far back, or obscuring it.
{ "thumbImageID": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "defaultDisplayName": "Epiphone Les Paul Special I P90 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51314371183322", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry-1314371183322.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Black", "sku": "sku:site51314371183302", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black-1314371183302.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51314371183312", "price": "149.00", "regularPrice": "149.00", "msrpPrice": "209.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow-1314371183312.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000-00-60x60.jpg", "imgAlt": "" } ] }
Like the Les Paul, the SG guitar models has an iconic status and it is another guitar coming from Gibson that has been passed-on to Epiphone to cater a wider audience because it carries a much friendlier price. This SG Special has the famous devilish cutaway body made from mahogany and has a bolt-on okoume neck with a comfortable to play slim tapered D-profile having 22 frets.
Power-valve distortion can also be produced in a dedicated rackmount valve power amp. A modular rackmount setup often involves a rackmount preamp, a rackmount valve power amp, and a rackmount dummy load to attenuate the output to desired volume levels. Some effects pedals internally produce power-valve distortion, including an optional dummy load for use as a power-valve distortion pedal. Such effects units can use a preamp valve such as the 12AX7 in a power-valve circuit configuration (as in the Stephenson's Stage Hog), or use a conventional power valve, such as the EL84 (as in the H&K Crunch Master compact tabletop unit). However, because these are usually placed before the pre-amplifier in the signal chain, they contribute to the overall tone in a different way. Power amplifier distortion may damage speakers.
The envelope filter is also known as an auto-wah.  It functions sonically like a wah-wah pedal but uses the strength of the signal to control the sweep of the frequency.  Typically, control knobs allows the player to set the amount of wah to interact with picking, so that the guitarist can dynamically control the effect without using a rocker to engage the filtering.
When we talk about instruments, sometimes the guitar gets all the credit. Of course guitars are great, but an electric guitar on its own—even a hollow-body—is only so loud. For giving one of the world's favorite instruments its voice, guitar amplifiers deserve a little love too. These amps and speakers are the powerhouses of your audio setup, turning your guitar's output from a simple electric current into those familiar sounds.
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.
But Harmony produced a lot of instruments other than guitars: ukuleles, banjos, mandolins, violins etc; the company was proud of it's history, proudly American, and as proud of its skilled workforce, as it's use of modern technology "We've produced millions of instruments but we make them one at a time". This long history of instrument manufacture explains why Harmony had the expertise to produce so many well-built acoustic and hollow-body electric instruments; guitars like the Meteor and Rocket were very well received. They were slow, however, in committing to the solid body market; although they released the H44 Stratotone neck-through solid body in 1952, it was gone by 1957, and there were only hollow bodies until the release of the Silhouette in 1963.
Whether you are an acoustic or electric guitar player one of the simplest ways you can add some dynamic or sonic change to your worship set is by stepping on an effects pedal at appropriate moments. However, if you are new to the world of pedals there seems to be endless choice of single or multiple effects units (and no, you don’t need as many as are in the photo!). Whilst multi-effects offer loads of sounds in one box, they can be hard to programme and difficult to adjust quickly on stage. There’s a million things written about effects pedals out there in Googleland but if you’re brand new to this here’s a potted overview of some of the most popular types.
The significance of Les Paul’s contributions to his Gibson guitar design remains controversial. The book “50 Years of the Gibson Les Paul” limits Paul’s contributions to two: advice on the trapeze tailpiece, and a preference for color (stating that Paul preferred gold as “it looks expensive”, and a second choice of black because “it makes your fingers appear to move faster on the box”, and “looks classy―like a tuxedo”).[11]
Beginners want to hear the changes in their sound and get the blues, funk, and rock genres on their guitar. The DigiTech Element XP comprises essential features that enable a beginner guitarist to get more out of their guitar while still maintaining quality. These units also have durable metal foot-switches and an inclusive power supply. Other features include:
Integrated MIDI Learn and automation tools streamline your workflow, while the dedicated Live View makes GUITAR RIG 5 PLAYER the perfect companion when performing. A range of versatile built-in tools assist you in the studio and on stage: A Metronome with different syncing options, two Tapedecks for easy recording and play-along, a Tuner and a Preset Volume tool with Dry/Wet settings are all at your disposal.
A guitar tuner pedal is an absolute must have if you’re serious about guitar as it provides accurate tuning instantly and can even allow you to tune your guitar to alternative tunings such as Drop D, open tunings and more. Check out our top 12 Best Guitar Tuners blog for more info on guitar tuners. The absolute industry standard is the BOSS TU-3 tuner pedal - a must have.
For the hobbyist guitarist this is a great 'bang for the buck' investment. It has practice tools for the beginner but solid tones for the advanced guitarist. For home use, maybe even a garage band it's perfectly adequate. If I were a more serious musician doing gigs with high end audio going to the audience, I'd be investing more than a hundred bucks in my stage rig.
All-fifths tuning is a tuning in intervals of perfect fifths like that of a mandolin, cello or violin; other names include "perfect fifths" and "fifths".[35] It has a wide range, thus it requires an appropriate range of string gauges. A high b' string is particularly thin and taut, which can be avoided by shifting the scale down by several steps or by a fifth.

More and more are finding themselves downsizing their pedalboards, if not totally swapping all their stompboxes for a multi-effects unit. There are also many who are looking to upgrade their existing guitar processor. Whatever your case may be, it is our intention to help you find one that fits your needs, or at least point you to the right direction.
Bass amps come with a range of different input and output jacks, depending on the cost of the amplifier and its intended purpose. The least expensive practice amps may only have a single 1/4" input jack and no output jacks. Some practice amps and small combo amps have RCA or 1/8" inputs for plugging an MP3 player or CD player into the bass amp, to facilitate practicing with a recording. Some amps have a high-gain input, for basses which have internal preamplifiers one the instrument. The high-gain input is routed through a pad (attenuator). An amp may also have a low-gain input, which is unattenuated, for regular basses. Some combo amps have a 1/4" auxiliary input, which could be used to plug in a keyboard, drum machine or second bass.
Buying an electric guitar is a very personal process, with many things to consider before you make your final choice. It’s not just a case of picking something with a nice color – you are usually parting with a substantial chunk of hard-earned cash, ranging anywhere from $100 to $2000 – or more – for some guitars, and therefore patience is required to find something that really suits you.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars: kay vintage reissue guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"kay vintage reissue guitars","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category2"}
The original run of Marshall Silver Jubilee amps were designed to celebrate Jim Marshall's 50th anniversary in music as well as 25 years of Marshall amps. These beautiful sounding (and highly sought after) amps have been brought back from extinction with the Marshall 2525H Mini Silver Jubilee Head, matching cab and combo and have been constructed using the original 2525 diagrams. This means you have all that vintage sounding goodness with modern reliability. You can even switch it from 20 Watt to 5 Watt power so you can go from live sound to home practice easily without ever losing your tone. A great amp for stage, home and studio recording.

Whether you're recording or just plain playing for the fun of it, a headphone guitar amp is a great thing to have. You can even choose headphone amps that will work with pedals, mixing consoles and other connections, giving you a ton of versatility in how you use them. If there's one thing that's universally true about these amplifiers, it's that no guitarist should be without at least one.
^ Jump up to: a b Peterson (2002, pp. 36–37):Peterson, Jonathon (2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA: The Guild of American Luthiers. Number 72 (Winter): 36–43. ISSN 1041-7176. Archived from the original on 21 October 2011.
{"pageName":"[gc] vintage: kay","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage","prop1":"[gc] vintage","evar51":"default: united states","prop10":"brands","prop11":"marshall","prop5":"[gc] vintage","prop6":"[gc] vintage","prop3":"[gc] vintage","prop4":"[gc] vintage","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
I doubt I can bring anything relevant to this discussion that hasn't been said already but since I liked the article so much and the subject has puzzled me since I got my first guitar, I jsut have to pitch in. My first guitar was a cheap Jackson-esque strat the brand was Cyclone. It was significantly lighter in weight than my friends Fender stratocaster and I liked it for that reason from the beginning. It was just much easier and more comfortable to play, esepecially while standing. Maybe because of this I've been biased to doubt the whole tonewood thing. My experience is that most 'guitar people' (at least here in Finland) seem to think that lighter wood is simply a sign of a bad quality electric guitar. I talked about this quite recently with a local luthier, who is very sience oriented and uses rosewood as the body. Guitars he makes are so light that when you pick them up at first, it is hard to believe they aren't hollow. So I asked him about his thoughts on the density and / or other qualities of the wood affecting the tone and his responce was pretty much consistent with the article. Anyhow he did mention the _theoretial_ possibility of the waves to traveling to the wood and reflecting back to the strings _possibly_ affecting the sustain. As someone stated, in real life physics there are never completely isolated phenomena but you can draw a line whether a factor is significant or not. John's comment above would support the more dense wood to be better but my guess is that when it comes to the sound that is audible to human ear, the material does not count. How a guitar feels is a totally different matter and shapes the way the player hears the sound drastically. My intuition says that lighter wood might convey the vibration to the players body which would partly exlpain Butch's experience with guitars with different materials. I've never thought about that before but do find anything else than the strings resonating (springs, screws..) uncomfprtable.
I have a shecter omen extreme 7 and found that the factor strings they put on were nice for my small fingers. I had to replace because the factor set in general needed some tweaking and they changed all the strings. Now i don't really like the strings they put on. Too small. All they had listed for the strings were 24X jumbo strings. What string set should i buy since i play Ambient, soft, but also djent metal.

The Gibson-owned Epiphone Company makes around 20 models of the Les Paul, most are similar copies of Gibson-made models, although when inspected closely, the Gibson originals are most often superior in craftsmanship and materials. Made in places outside the U.S., the Epiphone Les Pauls are made from more commonly available woods using less expensive foreign labor and have less hand detailing than the Gibson models, and, as a result, sell for a lower price. Epiphone Guitar Co. has been owned by Gibson Guitars since the 1950s. Once Gibson purchased Epiphone they quickly began making lower-quality guitars based on Gibson designs.[24]


When people ask "What are the guitar string sizes?" they really want to know about the gauges, the term referring to the diameter of the string.  The answer is... that's not quite how it works.  Yes there are standard gauges but in several standard sizes like light, medium, and heavy.  Each, when properly tuned, will exert a different tension on the guitar's neck and if you jump to another size you'll probably need to adjust the truss rod and get used to the new action of the fingerboard.

Interestingly, it’s the back of this guitar that’s the most visually attractive, with a drop dead gorgeous rosewood fretboard and quilt maple three-piece design. You’ll stare at it for some time before you can bring yourself to flip it over and start playing. That’s not to say the front doesn’t look good - the whole thing feels more upscale than the price.
Fuzz bass effects are sometimes created for bass by using fuzzbox effects designed for electric guitars. Fuzzboxes boost and clip the signal sufficiently to turn a standard sine wave input into what is effectively a square wave output, giving a much more distorted and synthetic sound than a standard distortion or overdrive. Paul McCartney of The Beatles used fuzz bass on "Think for Yourself" in the 1966 album "Rubber Soul"
There is no real rule on what fretsize is best – it is purely personal preference.  To find out what size is right for you or for a specific guitar and application, you may have to try similar guitars with different fretsizes.  I have heard many differing opinions on fretsize over the years; some say tall wire is too bumpy for sliding into position or that tall wire causes them to play sharp (from overly pressing down the strings, these players are used to feeling fingerboard surface under their finger tips).  Some say that fretwire below a certain height is difficult to bend on.  Bending and fretting hand slurring techniques are easier when the string can be addressed towards the middle of the ball end of the fingertip so that it may be pushed and pulled from the side rather than fretted from directly on top by the lower part of the fingertip. Some folks like a low fretwire as it feels very smooth to them and they don’t do a lot of slurring techniques.
4x vintage revvo castors as used on loads of vintage cabs, combos ideal if you have a vintage cab and want period correct castors What you see in the photos is what you get, this is the second set I have for sale, the rubber wheels have split and their are chunks missing out of a few. (this is reflected in the price) this isn’t an issue if your cab is just going to stand in your front room looking cool. please do study the photographs Free postage in the UK Anything else just ask

Depending on how you count them, there are 23 types of guitar pedals out there that can take you from "just another guitar player" to being that guy with the definitive tone and stage presence that everyone knows of around town. The only problem is it's a lot to wade through. But we've got you covered with quick summaries of what each pedal does, examples you can hear, and some visual examples for each of the guitar pedal types...
Like Television not too long before them, Fugazi founders Ian MacKaye and Guy Picciotto engaged in a locomotive, dub-influenced dual-guitar shouting match. Though most of the talk around Fugazi inevitably leads back to their founding ethos, that way of thinking and operating permeated the music as well: Together, MacKaye and Picciotto were anti-frontmen, playing like a living, fire-breathing, two-pronged embodiment of democracy.
Most Heroic Moment: The simple, searing lines of 1990’s “Turnover.” D.B.
Need a portable pedalboard for fly dates? Tech 21 has the answer in the form of the Fly Rig 5: a small but perfectly functional pedalboard, powered by an auto-switching adaptor, so it can be used anywhere in the world. What you get is the equivalent of five stompboxes. The SansAmp is at the heart of the Fly Rig. Stomp on its footswitch and its six mini control knobs light up blue. You get level and drive knobs, three-band EQ and a spring reverb emulation based on the Boost RVB pedal. In front of the SansAmp, you get the Plexi section, based on Tech 21's Hot-Rod Plexi pedal. One footswitch emulates the natural overdrive and distortion of a late-60s Marshall, with sound dialled in with level, tone and drive controls. A second 'Hot' footswitch brings in up to 21dB of boost and can be used independently of the Plexi distortion. Last in the signal chain is the DLA, a delay with tap tempo. The Fly Rig 5 is an extremely functional unit that contains arguably the most essential effects - you can plug it into a guitar amp or straight into a PA or mixing desk. It's also a life-saver should your equipment go down at the last minute, as well as being the answer to the prayers of guitarists who need to travel light.

Adjusting saddle height couldn’t be easier on a Les Paul. Since the bridge can only be adjusted at each end, there is no need to adjust each saddle individually. Firstly check and, if necessary, adjust the low (thick) E string height. Do this by adjusting the height of the bridge at the thick E string end. This is done by rotating the thumbwheel anti-clockwise (counter-clockwise) to raise the bridge or clockwise to lower it. You might be able to do this with just your fingers, but chances are you will need to use pliers. Be careful if you use a tool as it is easy to slip and damage the finish on your guitar. Alternatively you can slacken all of the strings and use your fingers, although this is a very time-consuming process. Finger method
THE NECK POCKET The next step is to rout the neck pocket and body cavities. For the neck pocket I like to use a 1/4" bit and leave the scrap wood edge around the body to give the router the extra support it needs when routing the neck area. To find out how deep you will have to rout the pocket measure the total thickness of the heal of the neck. Then measure the hieght of the bridge from the bottom to the top of the groove the string will sit in on the saddle and add about 1/8" to it. That allows for the string clearence over the frets. The subtract that from the overall thickness that you came up with when you measured the heal of the neck. That will give you a pretty accurate depth that you will need to carve the pocket down to. Be very careful when you rout the neck pocket! You don't want to make it too big otherwise you end up with gaps between the neck and the body and you don't want to go too deep because it can be impossible to fix. Rout a little bit at a time, and set the neck in each time to make sure you get the proper fit. It shouldn't fit to tight and the pocket should be slightly lager than the heal of the neck because you will have paint accumulation in it which will shrink it a little.
Gibson has been producing the Les Paul Studio electric guitar since 1983. One of the company’s lower-priced models, the Les Paul Studio was designed to attract guitar players who wanted to have the much-admired Les Paul sound without shelling out cash for cosmetic features found in upper-tier models like the Les Paul Standard. This is why the older Les Paul Studio models did not have headstock inlays and binding on the neck and body.
Little Martin: Designed around a modified O-14 fret body, the Little Martin series is built at a smaller 23″ scale length. With the exception of the LX1 and LX1E, which both have solid Sitka spruce tops, Little Martin series guitars are constructed with HPL top, back, and sides. Recent models incorporate a greater amount of synthetic materials, such as Stratabondnecks and Micarta (as opposed to rosewood or morado) fretboards and bridges. The guitars employ Modified X-Series “X” bracing, reinforced by a bowtie plate made of graphite. Little Martin series guitars do not havepickguards or fretboard inlays.
Black trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.
Daron Malakian (b. 1975) is the lead guitarist for System of a Down. During the System of a Down era, Daron played IC200's and IC300's on stage. During the Toxicity era, Malakian played a variation of the Ibanez Iceman ICX, with custom artwork designed by his father, then a special edition "DMM1" was released by Ibanez. The DMM1 featured more artwork by Malakian's father, Vartan Malakian (b. 1947). After using Gibson guitars for 5 years, Daron switched back to Ibanez and began using an Iceman again.
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.
Thanks for the list. Michael Gurian was a luthier in NYC who began as a classical guitar maker then began making steel string instuments in the 1960’s , I remember seeing his instruments shortly after i bought My first Martin in the dog years of the 70’s along wi Don Gallaghers instruments. Recently acquired one of his jumbos in Brazilian rosewood made in 1971 still in remarkable condition. He was among the first to compete as luthier with the big boys at Martin and gibson , even before Bob taylor jumped in.

Ibanez 12 string Martin style, vintage Natural High Quality Japanese Ibanez Vintage Guitar ....This example is MODEL# V302 ...And it IS ANOTHER great find this one is in a Natural finish and is a REAL GEM ta-boot and it has a Beautiful aged Premium Solid German Sitka Spruce Top, WoW! what a nice glass like original finish to this one ...again High Grade woods used on this 80's Ibanez AAA Mahogany Sides-Neck & Back "see quality og the grain in the pics" . Lots of volume & is full-and rich tone from this baby.Pics show missing string done while we were cleaning her up they just snapped ... obviously old and so this guitar will come with a brand new set of Martin strings installed for the new owner no worries..... this one is ez to play & stays in tune well. It is a crafted in Japan guitar and it compares favorably to Gibson, Guild or Martin... at a fraction of that cost. Note: we also have a Sunburst V302 in stock in our listings please see that if you prefer the guitar in sunburst. Thank you for your interest, Joe.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars: kay vintage reissue guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"kay vintage reissue guitars","prop5":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[mf] shop: guitars: electric guitars: semihollow and hollow body electric guitars","channel":"[mf] shop","linkInternalFilters":"javascript:,musiciansfriend.com","prop7":"[mf] sub category2"}
In this era, as well, Gibson began experimenting with new models such as the Les Paul Recording. This model is generally unpopular with guitarists due to its complex electronics. The Recording featured low-impedance pickups, many switches and buttons, and a highly specialized cable for impedance-matching to the amplifier. Less noticeable changes included, but were not limited to, maple fingerboards (1976), pickup cavity shielding, and the crossover of the ABR1 Tune-o-matic bridge into the modern day Nashville Tune-o-matic bridge. During the 1970s, the Les Paul body shape was incorporated into other Gibson models, including the S-1, the Sonex, the L6-S, and other models that did not follow the classic Les Paul layout.
• How frets influence action: This is generally a matter of taste, technique and wear. Some players who find they are encountering resistance when they bend strings may need larger frets. If notes sound buzzy or imprecise, the culprit may be too-low frets. On the other hand, frets that are too high can prevent proper intonation. But raising a guitar’s action may be a cheaper solution to correcting the latter problem than a fret replacement.

Years of hard-earned success and fame have not changed his down-to-earth attitude. Even though he has become one of the world’s richest rock stars, he hasn’t married a supermodel or become a pompous art collector. Instead, he’s remained true to his working-class roots, spending his spare time building incredibly cool kustom cars and cruising the streets with his car club buddies, the Beatniks of Koolsville.
×