Many people "re-amp" direct guitar tracks recorded to a DAW using amp-modeling software, with good results. Plug-ins are wonderfully suited to the virtual  recording environment, allowing for fast access to a plethora of modeling amplifier and speaker cabinet combinations, hence tones, effectively replacing a roomful of amps, cabs and microphones. Programming the virtual amplifier is the same as tweaking the knobs on the real thing, and the same is true for programming software dynamics and effects processors in relation to their hardware equivalents. As the realism and sophistication of modeling technology continue to develop, so does the viability of virtual re-amping as a production technique.
But if you never play with a tone as dark as the fully-rolled off sound, you might consider a lower-value cap. The next example is an .033μ (also know as 33n and 333), another popular choice, followed by the smaller .022μ (also know as 22n and 223), and the even smaller .01μ (also know as 10n and 103). As the cap gets smaller, the minimum tone knob settings gets less dark. As the overall range of the tone pot decreases, it may be easier to locate any desired “nooks and crannies” between the highest and lowest settings.

James Burton, another famous Twin user, put it best: “If you can plug your guitar into an amp and make it sound good, that’s what it’s all about. The amp I really enjoy playing, especially when I’m traveling, is the Fender ’65 Twin Reverb. It’s got everything you need for live playing and it has great tone. That amp just works for me and it’s real trustworthy. When I travel on the road, I do use a little digital delay and maybe a little chorus, but I just like the sound of the guitar and playing something that I think people will appreciate and understand.”
New too was “the popular Supro” Baton Guitar, sold with a matching Baton amp as the Supro Baton Guitar Outfit No. 200. This was basically the same shape as the old Avalon, but a short-scale (21″) student version now finished in a grained walnut finish. The silkscreened fingerboard sported diamond inlays. The Supro logo plate was on the slightly flared head. This had the new exposed-staggered-pole pickup with a rectangular handrest bolted on over the pickup, all mounted in the middle of a large square plate. The strings attached to a pyramidal tailpiece. Controls now included bakelite volume and tone knobs on either side of the end of the fingerboard. The back was covered in no-slip suede. It came with a natty alligator soft case. Based on the use of the description “popular,” which Supro almost always used to describe previously available models, the transition from the Avalon to the Baton may indeed have begun in 1940.
“The bottom line is you get a better dynamic response from the coil. Most people who play a hand-wound pickup say it sounds more ‘open’. It’s easy to make a pickup sound brighter but to have a truly open voice it’s got to be dynamically responsive – and that’s what scatter-winding [intentionally irregular hand-winding of a pickup coil] does. Also, compared to a machine-wound coil, the frequency response is slightly extended. So the sound is bigger and you hear more not just in the high frequencies but also in the depths of the frequency response.”
The name Epiphone stands above all for very good, less expensive alternatives to the unfortunately always quite expensive Gibson guitars. Gibson tries to offer good alternatives to their Gibson branded Instruments through its subsidiary Epiphone. Les Paul, SG, Explorer and other models. Todays Epiphone program includes electrical, half- and full-resonance guitars, basses, acoustic and electro-acoustic instruments, banjos and mandolins. Epiphone stands on the one hand for innovative ideas in guitar manufacturing and on the other for successful replicas of instrument classics that are affordable for everyone. 

Though he was influenced by everyone from B.B. King to Muddy Waters to Chuck Berry and Bob Dylan, Hendrix’s complete artistic vision included elements of blues, funk, rock, psychedelia and utter chaos. His frequent use of effects like the wah and Octavia pedal, pioneering studio effects like “backward” guitar and flanging, and use of controlled feedback and the tremolo bar added another dimension to his music.
Chorus: Generally you won’t hear delay during the chorus, though guitarists who strictly play lead can still find ways to utilize it.Verse: It’s probably the most “delay friendly” portion of a song, providing the lowered intensity that makes room for the extra noise of the delay effect.Bridge: A short solo or lead guitar segment will usually be pretty tame in Christian songs, allowing for the use of heavy delay, as well as other effects.
Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
Several producers like to create larger-than-life recorded sounds by splitting the guitarist's instrument signal to several different amps, which are then recorded simultaneously. Joe Barresi is a devotee of this tactic, and uses a dedicated guitar splitter box, such as the Little Labs PCP Instrument Distro or Systematic Systems Guitar Splitter, for the purpose. "In choosing the amplifiers and speakers, it's important to remember that larger speakers give a more compact, tighter sound. A tiny amp turned all the way up will give a more blown-out sound."

THE BODY This is where your guitar starts to take shape. After you have finnished your design you will need to trace it onto the wood that you are going to use for the template or body. A solid blank of tonewood that you can get from online retailers like Catalina Guitars can run anywhere in the price range of $70 to $250 depending on what wood you use. Some people will tell you that different wood will produce a different tone. While this is true in some cases like the crisper higher pitch tone of Mapel and the warmer fuller tones of Mahogany, you probably won't be able to tell the differnce between using a lower grade wood versus a higher grade more expensive wood. The only time that I would splurge and buy expinsive wood is if I was going to use a clear finish on the body and all the other parts of the guitar were going to be high end quality parts. For my project I didn't have a lot of money, much less the expensive tools to work with to produce a result that I would want to break the bank on.
MAKING A TEMPLATE Once you have traced out your design to the wood you can start routing. I recomend making a template first for the body rout out of 1/4" hard board or something equivalent to that. The professionals use cnc machines to carve and rout the bodies but smaller shops will use templates made from acrylic. The hard board works just fine, but might not last as long. You can also rout the body by hand and forget the template but if you mess up there's no going back so be carefull if you do.

If you want to combine the dynamics of a well-recorded drum kit with the pumping excitement you get from heavy compression, send either the overheads only or the entire kit to a buss and insert a nice-sounding compressor there. Set the compressor to a high ratio and low threshold and mix in some of this with the song. You may need to adjust the attack and release controls to get the effect you're after, but you don't need to blend in much of the compressed sound to really add punch and weight to a drum track. Nicholas Rowland

What worries Gruhn is not simply that profits are down. That happens in business. He’s concerned by the “why” behind the sales decline. When he opened his store 46 years ago, everyone wanted to be a guitar god, inspired by the men who roamed the concert stage, including Clapton, Jeff Beck, Jimi Hendrix, Carlos Santana and Jimmy Page. Now those boomers are retiring, downsizing and adjusting to fixed incomes. They’re looking to shed, not add to, their collections, and the younger generation isn’t stepping in to replace them.
I can't even begin to tell you how much I love mine, both for sentimental reasons and due to the fact that you couldn't buy that kind of quality nowadays for under a grand! I too, like the OP, am getting ready to do some restoration/ TLC on mine. New nut, saddle, bridge pins, tuners upgrade, and eventually fretwork. If you guys ever see one at a pawn shop, pick it up quick!! They can usually be bought for under $300!!!!
Yea um John Mayers way misunderunstood and under rated, watch the 'where the light is live in LA' DVD(and actually watch it before you think of posting a reply) and tell me he aint an amazing guitarist, im not saying hes a god but hes definetly an amzing guitarist n i rekon he deserves a spot just for the fact that hes one of the few guitarists of this generation with some talent.
If you have been playing for a year or two and are looking at something to replace your current model, it would be wise to save a little more and go for a mid-range guitar that may cost between $300 and $500. On this kind of guitar you’ll notice a big difference in sound, as well as the feel of the instrument and the overall playability. Use this page as a starting point to find something that may suit you. Until then, you are probably best off sticking with your current guitar.
Search out any discussion about tone and tonewoods on the internet and you will quickly find a wide variation of opinions among players and builders alike. However, the majority will almost always list "tonewoods" and/or specific species of Spruce and Cedar as the key to getting the desired tone from a guitar. Indeed, many beginning builders agonize over wood choice combinations as they relate to tone, with more experienced craftspeople offering suggestions that seem to assure the correct … [Read More...]
In 1979, there was a benefit for Amnesty International called “The Secret Policeman’s Ball”. Pete Townshend played acoustic versions of “Pinball Wizard”, “Drowned”, and (in a duet with classical guitarist John Williams) an astonishing version of “Won’t Get Fooled Again”. Unfortunately the soundtrack for that show has never been available in the CD and digital download era, but you can often spot these performances on YouTube. Highly recommended.

Gibbons has also twisted more than a few towering tall tales in his time, but his life is so surreal that it’s hard to tell where the truth ends and the trip takes over. His colorful manner of speech, known as “Gibbonics,” has made him one of Guitar World’s favorite interview subjects, especially since his poetic ponderings are loaded with insight, wisdom and a unique sense of humor.
The instruction covers both electric and acoustic guitars. The music part is thorough but progresses pretty quickly. It covers a few genres so that you can get the specific information you want whether you’re playing the blues or going classical. The best thing about it is that it is an all-in-one reference that even experienced players will appreciate.

Here you get a very bright sound but the output will be less than if it were wired in series and you no longer have hum canceling. Since you are using just one half of the humbucker, "coil-cut" sounds best when using a high output pickup (DiMarzio "X2N", DiMarzio "Distortion", Seymour Duncan "Invader", Seymour Duncan "Distortion", etc). A coil cut switch is relatively easy to wire up and it is just a matter of connecting one end of an SPST switch to that junction that was created for series wiring and connecting the other end of the switch to ground. So, we now have another 2 tone humbucker arrangement that can easily be switched back and forth between 2 tone options.
I own several guitars ranging from 700 dollars to 2000 dollars so I knew not to get my expectations up when purchasing a 100 dollar. I bought this as a gift for someone to learn on but when it arrived, I could not believe the quality of guitar this is. The tuning keys are high quality, the neck and fret board are high quality. It holds its tune as good as my Ovation and Ibanez acoustics as well as my 2000 dollar PRS guitar. Very easy to press the strings. Surely I thought this would be the difference maker from my more expensive guitars but it's actually easier to play. The pickup is a little more brighter sounding than on more expensive guitars but it's nothing you can't fix with your settings.
In a band and got your slot to wail? Think about it. Shredding scales is all well and good but the best songs and solos have structure, tempo changes and memorable licks. It may be a cliché, but listen to Jimmy Page’s solo in Led Zeppelin’s “Stairway to Heaven” – now that’s how you build-up to a solo. It may be your time to shine, but don’t just gush everywhere – think about structure and let your solos build and breathe.

Another application of a fuzz pedal is available when the user has control over the the amount of feedback signal routed back into the transistor loop while the pedal is engaged. By configuring the feedback to more sensitive levels, the pedal will feed back into itself causing oscillation*. As the pedal oscillates, certain frequencies will be produced, causing a singing sustained note without the guitarist playing anything at all. The player can consequently play over the note produced to cancel out the feedback loop, but once the player stops the pedal will feed back into itself producing the configured signal once again.
But you should remember that it is still a great value and the best guitar for the money. For this price, I don’t think you will get a better guitar anywhere else. If you are an intermediate or expert level player, this one is not for you. Let’s check out some technical features of the guitar: it comes with bolt-on neck joint, 12”radius of the fingerboard and nickel hardware etc. 
Jump up ^ "The first incontrovertible evidence of five-course instruments can be found in Miguel Fuenllana's Orphenica Lyre of 1554, which contains music for a vihuela de cinco ordenes. In the following year Juan Bermudo wrote in his Declaracion de Instrumentos Musicales: "We have seen a guitar in Spain with five courses of strings." Bermudo later mentions in the same book that "Guitars usually have four strings," which implies that the five-course guitar was of comparatively recent origin, and still something of an oddity". Tom and Mary Anne Evans Guitars: From the Renaissance to Rock. Paddington Press Ltd 1977 p.24
It is famed as the producer of some of the intriguing piece of guitar around like arch top ones, the SG series, Flying V, ES175, Firebird and more. In fact, the ES 175 was the first popular electric guitar around the world at the time. Another peculiar offering under them is the Les Paul Melody Maker, which has been the go-to option for many around the globe.
Lou Reed has been blowing traditional guitar styles to bits since his Velvet Underground days. A fan of Ike Turner's R&B and Ornette Coleman's free jazz, he created epic bad-trip psychedelia on songs like "Sister Ray." "He was rightfully quite proud of his own soloing," wrote fellow New York guitar luminary Robert Quine, "but resigned to the fact that most people weren't ready for it." As a solo artist, Reed kept on ripping up the rulebook: See 1975's Metal Machine Music, a noise opus that took feedback further than Hendrix could have imagined.
• Ready-made sound : ELECTRIC SUNBURST offers a high-quality set of effects, amplifiers and cabinet emulation. Three distortion and four modulation effects provide the sound of classical pedals, while five amp models and a choice of ten cabinets offer an authentic guitar sound – exactly the same. Finally, a high-quality console equalizer, two compressors, tape emulation, reverb, delay and tap delay allow you to get a real guitar sound!

In this lesson we will study Tennessee Stud as performed by Doc Watson. The tune has a great bluegrass type intro that repeats throughout the song. It applies many of the basic bluegrass principles we have discussed in the Bluegrass Genre section. The chords used are not difficult, however the timing and arrangement are a little tricky. Best to learn a section at a time.


The highly resonant basswood body offers a warm tonality which is ideal for the metal fans whilst the high output Schecter Diamond Plus pickups provide everything from crystal cleans to bone crushing riffage when you throw some distortion on your amplifier. Tune-O-Matic bridge with string through body ensures your notes reverberate a lot longer than regular bridges, so those big solos and riffs really stand out. The bolt on maple neck with 24 X-jumbo frets make it an extremely comfortable guitar to play and highly reliable. Ideal for beginners and pros alike.


Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue
Once you’ve gotten past the touch-or input level–intensive effects, your next primary goal is to refine your tone while at the same time minimizing noise. If you use a compressor, its ideal location is directly after the pitch shifter/harmonizer, envelope follower/auto wah and wah pedals. Because a compressor compresses the entire signal, it’s not recommended to place one after a boost, overdrive or distortion/fuzz pedal as those pedals often generate noise that will be boosted by a compressor along with the guitar’s signal.
Every decision, action, employee hiring, design of new models, etc.-comes from the C.E.O.-Henry J. He dictates every single decision that happens within the company. His power and control over the company is unimaginable. Nothing will change until he leaves or sells the company. First of all the C.E.O. hires every worker- (which is why you wait an eternity to get hired). He doesn't delegate hiring to other departments like other "normal" companies do. That is why you apply, take tons of tests, wait 3 to 5 months (not weeks!), take a drug screen test, if you pass that, then you are finally hired- for a factory job- not a job at the White house! Managers demean workers- most managers don't even have a high school level of education- while most of the workers have some college experience or a 4 yr. degree (including me). Why do the young (20 to 40 yrs. old) educated guys take the job? (1st)- it looks good on the resume, (2nd)- you get to work on guitars, which seems cool at first, until you realize it's a place you do not want to be -most guys leave after a year on average. There is no chance for advancement or a raise. The attitude from Mngt. is intimidation- to rule by fear. They actually get a thrill from firing people, they actually want you to fail, I have never seen anything like it. Everything is about hitting your daily numbers at any cost. Pay raises have been non-existent for years without explanation of why. H.R. is the worst I have ever seen. The women in H.R. dress extremely inappropriate and unprofessional. When you go to H.R. to ask questions, they literally sigh and roll their eyes like you are bothering them -instead of them actually doing their jobs. Nobody knows anything-when you ask for help, you get annoyed responses because they just want to hit their personal number to get out and go home. Managers do as little as possible to not get noticed, but do just enough to keep their jobs- while the workers do all the work to make them look good. Turnover is constant. Stress levels are off the charts. 2012 was my 1st yr. of 2 yrs. working there. We were doing from 650 to 800 guitars a day- (Massman Dr. plant). In comparison the Custom Shop makes about 50 a day. The Memphis Plant- 50 a day. The Montana plant- 50 a day- us =650 to 800 a day! We made the most guitars in 2012 ever -but for the first time nobody received a yearly bonus?!? Which makes no sense -until you figure out everything is about cutting costs-all ordered from the C.E.O. People will skip all their breaks and even lunch to hit their number to get out on time. Countless times we had no lacquer because Mngt. hadn't ordered on time?!? We would have no parts for the guitars (bridges, tuners, etc.)-because they forgot to order on time?!? Yet no one from Mngt. would take accountability for it. One day, 5 people in my dept. (20-30 in the whole plant overall) were fired with no warning (one lady had been there 18 yrs., one guy-8 yrs., etc.)-yet Gibson's attendance policy in their own handbook states you have to be given a oral warning, then a 1st written warning, then a 2nd written warning- yet all the workers were not given any warning. And the reason why is that it had been a slow Christmas season in sales, so they were all let go (ordered by Henry J. -the dictator) to cut payroll-but didn't follow their very own attendance policy-because they don't have to. There is no union, no protection for your job. They tell you you are fired, and to just deal with it, while the powers-that-be don't have to be accountable for anything. It is a dictatorship. A guy I worked there with has been there 20 yrs. And one day he counted up all the workers he remembered being fired or had quit in the 20 yrs. he had been there - it was 350 to 400! If you fail a drug test, you can keep your job?!? So you take 2 weeks off and go to drug rehab- but if you break the attendance policy - you are gone?!?- It's because the company doesn't have to pay you for 2 weeks, and it's something of a tax write off as well (that's what I was told). So basically you can break the law and do drugs- and still have a job. All in the name of saving money. The back break room refrigerator has not been cleaned in 2 yrs! No clock in the main break room for over 5 yrs. and counting! Gibson charged their own employees and their children to attend the company's (workers!) halloween party!?!? Gibson owns Tobias basses-made them 2 yrs. then stopped. Owns Slingerland drums, but hasn't made them in over 12 yrs (pics of them on the website are from late 1990's)! Baldwin pianos (makes on a on-order basis only, and only in Japan, not America anymore). Valley Arts guitars-stopped making them in 2002-12 yrs. ago. Etc,etc.etc! The point being is they buy up all these brand names- and have them on their website as if they are still being sold - but they are not! But they don't say that on their website. The C.E.O. has them to just build value for the Gibson/Epiphone name - to make it more valuable- to sell the company one day at maximum profit. I know this because managers told me this who had first hand knowledge. Guys have been punched in the face during arguments. One guy took a screwdriver and smashed it through the top of a hollow body guitar out of frustration! Arguments are a daily occurrence. My friend would come into work to start his shift, and be so nervous, he would throw up in the bathroom- because of the stress levels and negative atmosphere. Every day literally felt like you were going to prison! I really wanted to make this job work out for me. I am a musician (as are many who work there, many of us play gigs on weekends or nights). My long-term plan was to use my degree, and move up to a corporate position-until I found out what a nightmare the company is. I found out through everyone that I asked that corporate is run the same way! Many might be surprised by this review, because Gibson guitars are really revered by musicians. And outwardly the company has a reputation of the highest quality. But working there was the exact opposite, you would almost rather dig ditches! I have pretty much done it all- I owned my own business, waited tables, worked out in the heat-landscaping, worked in sales, marketing, management, etc. And I have never had such a negative work experience- ever! It affected my health mentally and physically (standing everyday for 10 hrs. or more). And let me tell you for those of you reading this -no job is worth that!
Once the electric guitar had been firmly established by the 1960s and 1970s, guitar designs became increasingly distinctive and reflective of popular music trends. And by the 1980s guitarists were more and more concerned with the look as well as sound of their instruments, regarding their guitars as identifying signatures. Eddie Van Halen decorated his guitar with colored sticky tape, and Prince has had guitars of all shapes and colors custom-created for his stage performances.
For the most part, you might want to get a preamp that has at least some type of EQ on it. Tone shaping on an acoustic electric guitar can really give you an edge or at least a semblance of control before the sound guy butchers it during your gig, although you can do this with an effects pedal. Even though this is something that takes the time to learn, it's better to have the option readily available when you decide to step up to that level.
So don't hesitate; your next multi effects pedals, rack-mounted units and accessories are probably waiting just a few clicks away. The only thing better than a board full of great pedals is one box that combines all those great pedals into a single convenient package - and once you've got that multi effects unit onstage with you, the possibilities are virtually endless for the personalized tones and unique sounds you'll be able to bring to every performance.
Very good working condition, this guitar is completely playable and in great condition. All electronics function properly without any issue. This guitar contains very minor cosmetic scuffs throughout, typical wear from a used guitar, nothing at all significant, please see pictures. The body, neck and headstock are all straight and contain zero cracks, bends, or bows. This guitar will come exactly as shown with soft gig bag.
Dimebag Darrell first discovered this guitar master while he was working in a club in Colleen, Texas. King was 17 and Darrell was 15. "They played and blew me away," King says. So he asked if the aspiring guitar legend needed help breaking down his guitar. It was the beginning of a working friendship that lasted until Dime's untimely death in 2004. Learning from another guitar master, Walt Treichler of Rotting Corpse, is what put this guy at the top of the extended family's list for repair answers. He also studied with Floyd Rose at a guitar show, learning everything there is to know about the Floyd Rose tremolo. "There's nothing better than the original thing Floyd came up with," he says. King is the kind of guitar doctor who makes house calls; but he's not accepting any new clients unless you're part of his extended family of musicians. "If I know 'em, and they need work on their guitar, I'll help 'em out."
The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
The overall design of the JS11 Dinky is a streamlined and straightforward, it is basically a less contoured version of the Dinky with cost-effective parts, assembled and built overseas. But don't count it out yet because many found it to exceed their expectations in terms of looks and tone. The 25.5" scale maple neck, flat 12" radius fingerboard and 1.6875" wide nut also makes it a pleasure to play, and have made life easier for both students and experienced players alike. The high output Jackson designed humbuckers are also good enough for high gain playing, although most got great results by switching them out.
An effect made popular by guitarists like Hendrix, Jerry Cantrell, Slash and many more, the Wah-Wah effect is a pedal-controlled Q filter. The ultra-recognisable vocal-like effect is obtained by having a Q parameter going back and forth, thus “opening” your guitar voice or narrowing it down removing treble frequencies. Words cannot really describe it, and since its inception the Wah was featured on countless records. The Dunlop Crybaby is by far the most popular wah pedal, built with trusty analog circuitry. Despite Dunlop’s fame, many other manufacturers built beautiful pedals that have left their mark in music history due to their slightly different sound, such as the VOX 84x series, the Fulltone, and the super modern optical Morley Wah.

Dr Doug Clark-"I stumbled onto your site while looking for an entry-level classical guitar for my grandson in Denver, Colorado. Regrettably, I'm not resident in England (though I've been there many times), otherwise I'd be on your doorstep tomorrow morning. That said, might you have any acquaintances in America (firms similar to yours) whom you could recommend? We're limited at this point (8th form next year, at Denver School of the Arts), to around $300 US. Any advice or recommendation you can offer will be greatly appreciated. Watched Harry and Meghan's wedding twice! Wish them both, and England itself, a wonderful decade ahead. PS: I took up steel string acoustic guitar at about age 60. Hence my email "handle". Still working on my skills and loving it."
Want to write blazing leads and screaming solos? Crank the pitch bend up, use one of four vibrato modes, and shred to your heart's content. Need some ultra-chunky rhythm chugs? S2 features both single-note and powerchord palm mutes with up to 5 layers and 8 variations each, offering superior realism and maximum options. While it excels at rock & metal playing (both lead and rhythm alike), it is also well-suited for many other genres thanks to its clean tone and huge range.
All the connections are conveniently grouped together on the back of the unit. You have a mono 1/4” input for your guitar and a stereo output which allows you to listen to your playing on headphones, speakers, or a guitar amp (there’s also a balanced XLR output if you need it). Zoom also includes a USB connection, which not only can power this pedal via USB, but also turns the Zoom G3X into an audio interface! This way you can easily record in your favorite DAW. The USB connection also means you can use Zoom's free Edit & Share software so you can easily manage your patches on your computer. Just like everything else on the Zoom G3X, the input and output options are just right and provide plenty of flexibility. There’s really no major omission we can think of.
I went to work for Southland Musical Merchandise Corporation on August 1, 1972. The company had been formerly owned by a very honest man named Harry Greenberg. Earlier in 1972 he sold out to Onsite Energy Systems and everything changed from "let's make the best product at the best price" to "let's see how high we can make our profit margin - to hell with quality".
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).
very recently I've been trying to get a band together where the Humbuckers of my les paul would suit the sound a lot more and decided to pull out my les paul, on trying to tune it, I noticed the intonation was a little off on all strings (not particularly noticeable by ear, but plugged into a tuner one could see it was off), but on the high E string it was very much off, from the third fret and higher it is very off sounding.

In the midst of the controversy, conservative commentators alleged that the raid was a politically motivated act of retaliation by the Obama administration, as Juszkiewicz had frequently donated to Republican politicians, including Marsha Blackburn and Lamar Alexander. Chris Martin IV, the CEO of Gibson competitor C.F. Martin & Co., had donated over $35,000 to the Democratic National Committee and Democratic candidates in the same time period. Though Martin featured several guitars in its catalog made with the same Indian wood as Gibson, the company was not subjected to a raid.[55] Following revelations in the 2013 IRS targeting controversy, the right-leaning magazine FrontPage declared that "there is now little doubt the raid...was politically motivated," and that "the Gibson Guitar case can hardly be dismissed as regulatory overreach. In hindsight, it was an ominous foreshadowing of the explosion of misdeeds we are witnessing today.[56]
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.

This group contains two effects pedals, which are the noise gate and compressor (and most of the time a volume pedal). You don't want to change that ordering, because of the result of compression. It reduces the variance between the highest peaks of volume and the lowest. And if you haven't taken the noise out of your signal yet using the noise gate, your signal-to-noise ratio becomes lower, making it more difficult to take out the noise in a musical fashion (it'll have more abrupt and noticeable moments of silence).
Power-tube distortion is required for amp sounds in some genres. In a standard master-volume guitar amp, as the amp's final or master volume is increased beyond the full power of the amplifier, power tube distortion is produced. The "power soak" approach places the attenuation between the power tubes and the guitar speaker. In the re-amped or "dummy load" approach, the tube power amp drives a mostly resistive dummy load while an additional low power amp drives the guitar speaker. In the isolation box approach, the guitar amplifier is used with a guitar speaker in a separate cabinet. A soundproofed isolation cabinet, isolation box, isolation booth, or isolation room can be used.
On my bench today, a partscaster with a Hamer Slammer neck, Carvin Rail in the bridge, Ry Cooder Dearmond middle, and PRS P90 in the neck. Wasn’t quite right (throbby) with the usual 3 250K pots and an 022 orange drop (i know, i know, but they aren’t that expensive). So, i went with 500K master vol, 500K master tone (found an old ceramic PRS 022 cap too), and an acme blender pot (neck and bridge) in the last position. Now it’s fun. Lots of variety in positions 1, 2, 4, & 5. 3 knobs and a whammy and she’s done.
Effects Pedals are electronic devices that modify the tone, pitch, or sound of an electric guitar. Effects can be housed in effects pedals, guitar amplifiers, guitar amplifier simulation software, and rackmount preamplifiers or processors. Electronic effects and signal processing form an important part of the electric guitar tone used in many genres, such as rock, pop, blues, and metal. All these are inserted into the signal path between an electric instrument and the amplifier. They modify the signal coming from the instrument, adding "effects" that change the way it sounds in order to add interest, create more impact or create aural soundscapes.
Ovation are relative newcomers to the world of vintage guitars, only launching their range at the 1967 NAMM show in Chicago. Ovation started as an off-shoot of founder Charles Kamen's work in the aviation field, studying vibration and resonances in helicopter blades. Whilst other respected American manufacturers relied heavily of quality nautral products and the artistry of their master luthiers, Ovation came very much from a science and engineering perspective: they used oscillographs to test existing instruments, and came up with the famous Ovation rounded back design, and suggested the use of a synthetic material, Lyrachord, claiming it to be more resonant that any wood.
With so many options available in the world today, buying a guitar that perfectly represents your own style, tastes, and attitude has never been easier. Whether you're a classical guitarist looking for that perfectly balanced nylon flamenco, or a hard rock enthusiast who needs Pete Townshend crunch combined with Jack White power, there is simply no shortage of axes to choose from.

A list that's bound to be disagreed with, and I do. Although I love Hendrix, Clapton, etc. I'm still most impressed with Mississippi Fred McDowell. Bass line, rhythm, lead slide, and singing simultaneously and effortlessly. Several video performance on DVD are available, in case you listen to just an audio recording and wondered "who are the other guitarists playing, they're really good together?" nope, just Fred.
The brand boasts of a remarkable following. The famous Fender Stratocaster is deservedly regarded as the guitarist’s electric; it has a long lineup of musicians who used and still use it for studio recordings or live performances. A few names: Jimi Hendrix, Eric Clapton, George Harrison of the Beatles, The Edge of U2, and Jeff Beck of the Yardbirds. The enduring popularity of this model is largely due to its incredible versatility; it bridges styles and genres with ease.
Because of the miniaturization of all things electronic, you can now get full-sounding, authentic guitar sounds from a unit the size of a disposable camera — as long as you listen to it through headphones (meaning that it has no speaker or power amp of its own). These battery-powered wonders come with belt clips for untethered practicing (great for checking your stage moves in the mirror).
If you want to measure the fret size on existing instruments, a good way to do it is to get an inexpensive dial caliper (think Harbor Freight etc).  You can measure the width with the outer jaws (make sure to zero out the calipers for accurate measurements), but for the height (unless you are going to notch the depth rod and subtract the difference), use a piece of something of a uniform thickness and drill a hole in it to accomodate the depth rod, place it across two frets and measure thru the hole (usually near the crown) to the fingerboard and subtract your piece's thickness.  When measuring fret height, it is always good to measure a few different places on the neck as the height may vary according to leveling and wear. On many guitars (but not all) the upper frets (if there is not a neck joint area hump that was accounting for during leveling) will be a good indicator of fret height.
Compressor pedals add a softening effect too, by reducing the front edge of notes and amplifying their tails. This increases sustain by bumping up the signal as the note fades out. Most compressors allow you to control both the thresholds (upper and lower limits) and the knee (the speed with which the signal is raised or lowered). The big appeal for guitarists is the compressor's ability to simulate the natural compression that tube amps generate when driven at medium to high levels. A good compressor can help thicken up the sound of your guitar and add extra punch to your performance.

We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.
The name has a long and involved history that is interwoven with that of the resonator guitar. Originally coined by the Dopyera brothers when they formed the Dobro Manufacturing Company, in time it came to commonly mean a resonator guitar, or specifically one with a single inverted resonator. This particular design was introduced by the Dopyeras’ new company, in competition to the already patented Tricone and biscuit designs owned and produced by the National String Instrument Corporation.
Looking for a lifelong friend, something solid that will get better with age and can take a thrashing if needed. I plan on using drop tunings for heavy rock and will be dropping a set of alnico bare knuckle pickups into it and running it through a dual rectifier. Preferences but not important are, mahogany body, standard bridge, Les Paul style necks, most classic body shapes. Any model/brand suggestions would be greatly appreciated. I’m living in an isolated region so this will be a blind purchase. Really love my Schecter Diamond Series Tempest Classic but unfortunately it did not stand the test of time and will need a restoration on the neck.
With a typical Strat single coil pickup and assuming an instrument cable capacitance of 500pF, 250K tone pot, 0.022uF cap, guitar plugged in to a 1Meg input, the range of the tone control is roughly from 6.0kHz -3dB (tone fully clockwise – with a resonant peak of +7.4dB at 3.9kHz) to 950Hz (tone fully anti-clockwise – with a resonant peak of +4.5dB at 594Hz). These figures vary from pickup to pickup and depending on the instrument cable capacitance.
Rickenbacker: From making world’s first electric guitar to making the most iconic guitars of Rock’n Roll, Rickenbacker has a history of innovations in guitar industry. Their guitars are still made in the old way. Owning a Rickenbacker is pretty much like owning a classic muscle car, yes there may be more modern guitars out there but no one’s got the mojo of a Rickenbacker.
{ "thumbImageID": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "defaultDisplayName": "Yamaha Billy Sheehan Signature Attitude 3 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51308847077862", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black-1308847077862.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black/H75903000001000", "brandName": "Yamaha", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Black/H75903000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Blue", "sku": "sku:site51308847077871", "price": "2,599.99", "regularPrice": "2,599.99", "msrpPrice": "4,600.00", "priceVisibility": "1", "skuUrl": "/Yamaha/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue-1308847077871.gc", "skuImageId": "Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000", "brandName": "Yamaha", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Billy-Sheehan-Signature-Attitude-3-Electric-Bass-Guitar-Sonic-Blue/H75903000002000-00-60x60.jpg", "imgAlt": "" } ] }

Straight out of the box you have over 68 on-board digital effects, 75 custom designed factory patches for iconic sounds, 5 amp emulations and 5 cabinet emulators, so you’re not going to run out of choices on stage or in the studio. In addition, you have access to the Guitar Lab software app that allows you to download new stomp boxes and patches regularly.
It's pretty common that your fingers hurting at first. We all went through it. It does not matter what kind of strings you use. You will pay the price…. Think of it as a Right-Of Passage, or an initiation of sorts. If you think about it, everything in life that is pleasurable comes with a certain amount of pain that must be endured, whether it is financial, such as buying something you really want, emotional, as in love, or physical, such as building your muscles and playing sports.
The dual-DSP-powered Helix combines amp and effects models in a large, rugged floor pedal. There are a massive 1,024 preset locations onboard the Helix, organised into eight setlists that contain 32 banks with four presets each. Each preset can have up to four stereo signal paths, each made up of eight blocks populated with amps and effects. With the current count of 41 modelled amps, seven bass amps, 30 cabs, 16 mics, 80 effects and the option of loading speaker impulse responses, there's great potential for sound creation. Line 6 has implemented an easy editing system, complete with a joystick, and - get this - touch-sensitive footswitches offering a shortcut to parameter adjustment; you can even use these with your feet to select a parameter before adjusting it with the pedal treadle! There are some great sounds here, especially when you get beyond the factory presets and shape things to your own taste. The Helix's advantage lies in its comprehensive input/output and signal routing ability, which can facilitate just about any guitar-related studio or onstage task you can think of. However, if you don't need all that connectivity, and want to save a bit of cash, there's also the Line 6 Helix LT.
By contrast, tuning (or pitch) correction processors and plug-ins are normally considered processors rather than effects, but they do have creative uses. The idea behind these devices is to monitor the pitch of the incoming signal, then compare it to a user-defined scale, which can be a simple chromatic scale or any combination of notes. Pitch-shifting techniques are then used to nudge the audio to the nearest semitone in the user's scale but, because the amount of pitch-shift required is usually quite small, the result doesn't sound grainy or lumpy, as often happens when large amounts of pitch-shift are generated. Because pitch tracking is used to identify the original pitch, only monophonic signals can be treated.
Now if this house is rocking, don’t bother knockin. Famous words by Stevie. Many people perhaps know him for Hendrix covers, but where Jimi left off Stevie continued, and continued he did. The elements of Hendrix were alive and plain to see in SRV, but with it, he also mixed in his own influences such as Albert King and his own soul to make it his sound a trademark spot on his songs. I vaguely remember a car commercial where I spotted Stevie’s playing (Pride and Joy) in a Nissan ad. That was much before I really got into Vaughan’s work. SRV was an artist who could play while absolutely stoned face. And when he did sober up, he actually played better. His newfound health and love for life and music are showcased on In Step his last album before his death a year later. Stevie’s footprints will always be in the air and in our hearts.
So the actual vibrating length of the string should be the same in all cases, and if that's all that affects the magnetic field then none of the other things mentioned above should affect that signal. Do a simple test protocol such as plucking each string with the identical pick, record the waveform, overlay them and look for differences in the waveform.
I think Matts’ advice is good, (old guitar strings can be helpfull for “fishing”) but if you change your p’ups and switching often an accessible control cavity is a great thing, just be sure to drop all pots and such into the body and drill through the potentiometer holes so you know where to place template and assure router bit won’t hit anything dangling in the body.
At the time of writing, the annual membership is $179.00. This makes it a very low $14.91 per month. If you prefer to pay monthly you can get started with $19.95. There is also a special deal, discount coupon code that will make it even cheaper for the first month. Check further below to find the 60% discount coupon code for the first month’s subscription.
Fender guitars are made either in the United States or Mexico. There is a limited number of guitars being made in Japan, but those are only sold on Japanese domestic market. The difference in quality between the U.S. and Mexican Fenders is obvious but not too great. No matter which one you go for, you will get the same refined tone that made this company famous.
Keep in mind that the year the guitar was built is no guarantee that any individual guitar is in the optimum condition required to handle steel strings. Any Martin should be evaluated with care, and a top that lifts significantly in the bridge area or this is not firm, is a sign that lighter strings should be used. Or that the guitar is in need of attention by a qualified repair person.
The open strings of a guitar can be tuned to microtonal intervals, however microtonal scales cannot easily be played on a conventional guitar because the frets only allow for a chromatic scale of twelve equally spaced pitches, each a semitone apart. (Certain microtonal scales, particularly quarter tones, can be played on a standard guitar solely by adjusting tunings, but the distance between notes on the scale makes it somewhat impractical.) It is possible to play microtonal scales on a fretless guitar, to convert a fretted guitar into a fretless, or to make a custom neck with a specific microtonal fret spacing.
Description: Body: Mahogany - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Maple - Frets: 24 - Inlay: None - # of Strings: 6 - Scale Length: 27" (69cm) - Headstock: 7 In-Line, Reverse - Bridge: Floyd Rose Style Locking Tremolo - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, Grover Tuners - Circuit Type: Active - Pickups: EMG 707 - Pickup Configuration: H-H - String Instrument Finish: Tribal Purple, Black flame, Tribal Green, Blue Quilt, Satin Natural, Blue Flame
La Niña en la Tienda de Flores / The Girl in the Flower Shop (https://shop.per-olovkindgren.com/?product_tag=la-nina-en-la-tienda-de-flores) is inspired of when I was in a flower shop in Miami for buying red roses for Valentins day. The young girl serving me was a beautiful young "Latina" with a smile I will never forget. She told me my wife/girlfriend was very lucky to receive those...
alright i think we all need to stop hating on john mayer. I don't think that he really would even call himself one of the best guitarists of all time, he's obviously not far enough into his career to be criticized about this stuff. But i love him, and he eventually will make it on this list. Oh, and for all you who say he sucks and whatever, if he is so bad then why has he played with so many of the people who actually should deserve to be on this list?

Founded by the American Orville Gibson in 1902, Gibson is without a doubt the other legendary electric guitar brand. Their most famous model holds the name of the very popular guitarist Les Paul, who collaborated with Ted McCarty in its design back in the 1950's. Unlike the Telecaster and Stratocaster, the Les Paul boasts a mahogany body, a set mahogany neck, a rosewood fingerboard, and a maple top. Among the many Les Paul players we find Jimmy Page from Led Zeppelin:
Now, if you are an electric player who doesn’t like using any pedals, that’s perfectly fine. Just be honest about the reasons. If you just like the sound of your guitar and your amp, cool. If you just want to keep things simple, I understand. That’s your preference, and it doesn’t make you better in any way than someone else who does. If you’ve been a genuine listener of music, you’ve seen and heard players who’ve blown their audiences away on un-amplified classical guitars, and players who blow us away with lots of pedals on their boards.
Though because of this flexibility, it can be hard to figure which of the many types of electric guitar is going to be a good fit for your needs. Thankfully, if you’ve arrived at this article you’re going to get all of the information that you need to make an informed decision on which body styles are going to be worth considering for your genre of choice.

Jump up ^ Hicks, Michael (2000). Sixties Rock: Garage, Psychedelic, and Other Satisfactions. University of Illinois Press. p. 18. ISBN 0-252-06915-3. While most of the documentation on early fuzz boxes has been discarded or lost, the earliest such devices appear to have been introduced in 1962. The best known from that year was the Maestro Fuzztone FZ-1...


GNUitar is a basic free guitar effects software that allows you to turn your PC into a guitar effects processor without having to spend a single dime. Nothing much needs to be said aside from it is working as intended. Although you don't have too many options, it has all the essential effect types including distortion, reverb, echo, delay, chorus, flanger, equalizer, wah, phaser, tremolo, vibrato and noise reduction. The package comes with 2 different types of distortion and has various flavors of echo, reverb and delay. This free software works for both Windows and Linux.
Sorry it has sold: Here we have a rather nice rare vintage 1970 Yairi & Son Classical acoustic guitar It's Label reads... Hand Crafted in Japan by Yairi & Son Model # 300 Serial # 177 Pretty darn low serial number 1970 remember she's 45 years old! Condition overall is very good - excellent used / vintage Not new or mint of course... Regarding its build quality She exhibits beautiful workmanship and superior materials Aged woods of over 30+ years old in 1970 when it was built! Tone-Woods now are in the 75 year range on this example looks like a Vintage masterpiece with its patina and look and feel I love these oldies funny thing is It still shines like glass to, amazing really when you think about it. This guitar has very good deep base tone and excellent volume and plays easily and comfortably the neck is nice and big 2" at the nut nice and wide feel to it. The neck is made of a high grade mahogany see pics, back and sides are also beautiful mahogany, with black or very dark brown bindings for a very classic look, the on the business end she has a wonderful quality solid spruce top with lots of bear claw figuring a really nice sound box it projects very well in deed... As you look at its back side in its entirety top to bottom it's hard to find a blemish I'm sure there are a few minors but it's really looking very clean and with a surprisingly shiny original finish... The front the headstock is pretty clean as well!...notice a bone nut has been fit, frets show little to no wear what so ever more than 90% remaining fret life, the fingerboard shows a little play action remember it's a 1970! ... The top as several chips and drinks and I have addressed them a touch up lacquer pen and just dabbed the tiny chip to prevent further chipping there it as a result after I polished it up turned out pretty darn good looking too, This guitar came to us as a partial trade with its bridge pulled nearly off by a ding dong previous owner that put regular gauge dred heavy gauge strings on it for long term and it lifted off in time, I removed all that cleaned up the woods & prepped it for a new vintage period correct Jacaranda rosewood classical bridge and glued it with hide glue clamping it up for 2 weeks & set her up with a bone nut & saddle and a new set of Dean Markley strings... This beauty comes with its original hard shell case black Tolex with a plush Marigold lining one bad latch but still functions well good hinges and handle so it's still ok. This is rock solid now as the Yairi & Son label says use only nylon strings. If you just use what Yairi suggested this would have never happened not Yairi's fault just the wild eyed idea gone wrong. Anyways she's back in action and sounding better than ever so if you like these old Yairi & Son classical guitars this may be a good consideration for you.... Let me know if you likeeee. Email Joe at: jvguitars@gmail.com .
The Teisco J-1 was a natural maple-topped guitar with a single pickup near the adjustable wooden bridge, a large affair with a metal cover with six slots parallel to the strings and two round bulbs on either side, very space-age! The stop tail was probably rounded, allowing strings to pass through the body, and was covered with a square metal plate. A small pickguard sat between the pickup and the neck. A volume and tone control sat on another little piece of plastic down on the lower treble bout. Knobs were white plastic knurled with a silver ring around the top.
-have any of you ever heard of chet atkins. he could play anything the guys you mention but, they could not or can,t play any thing he played-hell non-finger style players you have to go with nokie edwards from the ventures. you guys are obviously rock only players and listen to only them only -do yourselves a favor and get his albums-mister guitar and workshop-they show just how good he was and then make a comment here
Even if he had never progressed beyond the brain-rattling riffing of "2112" and "Xanadu," Rush's guitarist would have left his mark on Metallica and other like-minded metalheads. But he went on to fill out Rush's power-trio sound with a seamless mix of lush arpeggios and rock crunch that sounded like at least two players at once. "The guitar just had to make a broader statement," he says. Alex Lifeson reserves his most daring playing for his solos – just try wrapping your head around the extra­terrestrial lunacy of "Freewill."
What you need is some basic knowledge about the physics of audio (most of which you can learn by dropping a pebble in a puddle of water), and some pretty basic and inexpensive equipment. This is especially true for recording the electric guitar. Trust me--if it were brain surgery, I would have become a brain surgeon and made my mother a much happier woman. And while I have the opportunity . . . for all you kids who want to grow up to be recording engineers--don't do it. Become brain surgeons. They make a lot more money, drive nicer cars, and never have to worry about where their next gig is coming from.
The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.
In the following essay I will outline the steps involved in the set up of an electric guitar. These guidelines will not address the nuances of Floyd Rose style bridge assemblies. I am presuming here that the frets on the guitar in question are level and properly seated, but it should be noted that the process of leveling and dressing/crowning guitar frets is indeed sometimes necessary before a set-up can be performed. I am also presenting this outline without an in-depth itemization and discussion of the specialized tools that are necessary for some of the adjustments.
I have a Hohner DC. It is either a MIC or MIK. It does not have body, or neck bindings, but in every other respect is very nice. It was one of the first guitars I got when I started paly about 5 years ago. As a matter of fact, I had not played it for over a year - I recently got it out of the case, re-strung it and played it regularly for a couple weeks. I have been going over my colection looking for things I could sell off, but I decided to keep this one.
by pedalhaven This little board from  @andshamlian  is so sick! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
This is the first defined price range that is worth talking about. Here's where you run into some pretty decent guitars that pack a lot more value for being just beyond the beginner's tier. Even so, there are also a lot of guitars here which simply aren't worth the price, no matter how good the marketing. We've tossed those out the window and are only sharing the two models we know deliver the goods.
There are several string configurations available with electric guitars, including 4-string, 6-string, 7-string, and 12-string configurations. Although each configuration can make a slightly different sound, the differences are mostly down to personal preference. Nontraditional configurations include 5-string, 8-string, 9-string, 10-string, and 18-string versions.
Most Martin guitars made are "flat top" models. That is, they have a round sound hole in approximately the center of the flat top of the guitar, with a "pin" style bridge. Martin also made some archtop models during the 1930s. These can have a round sound hole, or two "f" style sound holes (one on each side of the top of the body), and have an arched top, with a "trapeze" style bridge. Martin also made ukuleles. If a guitar only has four strings (and is not a ukulele), this is known as a Tenor guitar. Uke size instruments with ten string are Tiples. Uke size instruments with eight strings are Taropatches. Martin also made mandolins, which have eight strings. To summarize:
To quote the super-helpful legendarytones.com, "The Hiwatt DR103 is notably louder and can also run much cleaner than 100-watt Marshalls when needed, and they also have tremendous headroom available. Playing a Hiwatt at a loud volume is, well, an experience." The site adds, "The Hiwatt DR103 design is based around the use of four EL-34 power tubes and four 12AX7 preamp tubes. The transformers are set up so that the amp can be used with various line voltages around the world and speaker impedance can also be set to 4, 8, or 16 ohms with two speaker outputs wired in parallel."
Tube amp distortion is created when tubes are overdriven by receiving more juice than they can handle, thus causing the signal break up. Tube-driven amplifiers are still in demand by seasoned players because of the warm, musical tones they create, and some distortion-type effects use actual tubes to replicate that sound. But most distortion effects are produced either through analog solid-state circuitry or digitally.
Fender’s arm when it comes to affordable quality guitars is the Squier. The Affinity Stratocaster is no push over. It has an ergonomically design contoured double cutaway body made of alder and has the C-shape all maple or with rosewood fingerboard neck patterned over an original Fender which contributes greatly to the guitars comfort and playabilty.

Since there are 2 coils, you can have up to 4 wires with which to work, providing you with a great many tone options. Almost all independent pickup companies manufacture humbuckers with 4 conductor cable. Stock guitar humbuckers rarely have 4 wires coming out of them but sometimes it is possible to convert 2 wire humbuckers to 4 wire types. This is an exacting procedure with little room for error but the tone rewards can be well worth the effort. If you really want to give this a try, then click here.
Wengrow said that Gibson got outmaneuvered by its competitors. “In the 1950s and 60s, it was really just Fender and Gibson as the two main guitar makers and they became the standard bearers. But other guitar makers such as Ibanez, Jackson, Yamaha and Paul Reed Smith, came to existence and copied their standards but continually updated many features and customizations that better reflected the idiosyncrasies of the times, often for cheaper prices.”
Only two or three frets are needed for the guitar chords—major, minor, and dominant sevenths—which are emphasized in introductions to guitar-playing and to the fundamentals of music.[87][88] Each major and minor chord can be played on exactly two successive frets on exactly three successive strings, and therefore each needs only two fingers. Other chords—seconds, fourths, sevenths, and ninths—are played on only three successive frets.[89]
National did not seem interested in the project, and, as we’ve seen, Beauchamp and Barth left National that year to begin Ro-Pat-In with Rickenbacker, where they used their ideas on the development of the new Electro electric Hawaiian aluminum “frying pans” and Spanish guitars. Again, some disagreement exists regarding the relative roles of Beauchamp and Rickenbacker in the development of these guitars, but, again that’s a different story. Beauchamp applied for a patent on his “frying pan” on June 8, 1933, and again on June 2, 1934, eventually receiving the patent on August 10, 1937.
National Reso-Phonic Guitars - World renowned for their resonator instruments. Unlike acoustic guitars, where the vibration of the wooden body creates the sound, in a resonator instrument the body acts as a speaker cabinet. When the strings are plucked, the vibration is transmitted through the saddle to the resonator. The resonator, or speaker cone, then amplifies that vibration.
Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.

Although fairly small in size, this packs a serious punch thanks to the overdrive control which can produce that classic orange crunch to smooth and creamy British distortion. The Orange Crush 12 is definitely a great small gig and rehearsal amp, but it also makes a fantastic amplifier for practice at home thanks to the headphone/line output which features the Orange CabSim technology. This allows you to plug your headphones in and enjoy a faithfully emulated sound of a mic’d Orange 4×12" cabinet directly to your headphones – ideal for silent practice. This can also be used in conjunction with your audio interface for direct recording and the capturing of authentic Orange tones without dragging a massive cabinet into a room (or destroying your windows!).
Guitar pickups are a vital component of your tone and replacing them is something that most guitarists can learn to do themselves. Using high quality pickups can go a long way to bringing new life and excitement to your playing experience. There are hundreds of pickup manufacturers and thousands of pickups to choose from. Whether you’re looking for a hotter pickup, trying to capture a beloved vintage tone or seeking single-coil sound in a noiseless package, brands like DiMarzio®, Seymour Duncan®, Lace®, Porter®, Fender®, Gibson® and many others offer a solution.
If anybody needs a Bridge, I have a Teisco Roller Bridge for sale, it is a a copy of a Gretsch Roller bridge but includes a solid steel Base like a Rickenbacker Bridge Base. The string saddles are rollers which are adjustable side-to-side for proper string spacing, and each side of the bridge is adjustable for Height. It is in excellent condition, probably from 1965 thru 1968. On a scale of 0 to 10, it is a 8.

Sound engineers prevent unwanted, unintended distortion and clipping using a number of methods. They may reduce the gain on microphone preamplifiers on the audio console; use attenuation "pads" (a button on audio console channel strips, DI unit and some bass amplifiers; and use electronic audio compressor effects and limiters to prevent sudden volume peaks from vocal mics from causing unwanted distortion.
Das Musikding is your online store for building guitar effect pedals, bass effect pedals , guitar amps, bass amps, synthesizer and many other musical related electronics projects. You can get pedal parts or complete kits, for all stages of building experience. Effects are great for guitar and Bass! Guitar effect kits available are Distortion, Booster, Fuzz, Overdrive, Delay, Tremolo, Compressor, Switches, Loopers and many other. We also feature kits and modules by GuitarPCB.com and Molten Voltage Pedalsync. Amp kits are available by Madamp, great kits for a great price. Building guitar and bass effects made easy! You can get resistors, capacitors, potentiometer, knobs, jacks and plugs, aluminium and steel enclosure, transformer, wire and cable and many more things. Manufacturer are Wima, Alpha, Neutrik, Switchcraft and many more. Our shipping costs are low and the prices very good. If you need a special offer, just ask us!
Around the same time as the 700-800 series of guitars there was also a line of acoustics. The steel-stringed "Folk Guitars" featured necks and headstocks very similar, if not the same as, the electric models. The nylon-stringed "Classical Guitars" featured slotted headstocks with the curly logo squeezed into the middle. The acoustics seem to be pretty well-made and often fetch pretty good prices on Ebay. One reader of this site even found a Kent banjo made in Germany. The lettering of the name is the same as on the 700-800 series instruments without the curly thingie.
After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.

When you are in Drop D tuning, the note open string is a D. This means that at fifth fret you would play a G. To get the A note (the root of the power chord) you would move up to the seventh fret. How convenient that the fifth is right next to it, on the seventh fret of the next string! Power chords now look like the following chart. Note the difference between these chords and those in the previous chart.
There are a few ways to save some money on your electric guitar (click for modal analysis). One way is to order online, for example from Amazon, which is usually cheaper than buying from a physical shop. Make sure that you know what the usual price for the guitar you want is, so that you can compare different sites, and in the best of worlds, use a discount code or wait until there’s a sale.

As discussed, Delay pedals add so much more weight to your sound and gives your guitar a doubling effect, which is really useful to make it sound like there’s two guitars on stage. They’re also great for creating psychedelic sounds and experimenting with riffs. Again, you don’t have to dial in big delay effects and can use the pedal subtly to add resonance.
Because IRs can be recorded in virtually any space, convolution reverbs generally come with a library of IRs ranging from small live rooms to famous venues, top studio rooms, forests, canyons, railway stations and just about anything else you can think of. They sound very convincing, and there's plenty of variety to be had, but once the IR is loaded, there's only a limited amount of editing you can do without spoiling the natural sound. Usually you can apply EQ and also change the envelope of the reverb decay to make it shorter, and adding pre-delay is not a problem, but after that you pretty much have to take what you get. Some companies, such as Waves, have managed to create additional controls but, as a rule, the further you move from the original IR, the less natural the end result.
The inlays are the little shapes that are installed in the instruments neck/fretboard. Inlays do not make a significant difference in the sound of the instrument. They come in various shapes and materials. Inlays allow a player to quickly see where certain positions are located on the fretboard. They are also a great way to decorate, or personalize an instrument. Choose among our existing inlays designs, or send us a drawing of your own designs. Some popular inlay designs are band logos, initials, corporate brand logos, or tribal designs.

Rule 4—Taking sound-making devices like stompbox pedals out of the equation, there’s an order to the way sounds naturally occur in physical space. For example, guitar amp distortion is made in physical space by turning an amp up enough to cause its circuits to overload, and any echo you might hear happens after the distorted sound hits walls or ceilings and bounces back to your ears. Therefore, logic says that your reverb and/or delay pedals should be last in the signal path, since that is how the sounds they produce actually occur in three-dimensional space.


If you are inexperienced, it is only recommended that you attempt to setup a guitar that is of little value to you, both financially and sentimentally. If you don’t have one that fits these requirements, then it is best to pay the cost of a guitar setup as performed by a professional. The primary risk while setting up the instrument is over adjustment. Working any part of the bridge too much will cause wear and tear, and irreparable damage to the neck is often the result of improperly adjusting the truss rod. It is always hard to justify ruining a perfectly good instrument in order to avoid guitar setup cost.
Slicer – A dynamic effect that sounds like your guitar tone is chopping in and out. This percussive effect is akin to sequencer-type effects used by synthesizers. The effect turns the volume of the signal on and off, and sounds like the signal is being “chopped up” or “sliced” in a specified pattern. The BOSS SL-20 Slicer features 50 patterns to turn your guitar into a groove machine!
In his informative, yet relaxed style, Sean takes us on a complete guitar recording journey starting at the vibrating strings and ending at the DAW. You'll first learn how to tune and prepare a guitar for recording. Next you're off to investigate the world of the electric guitar. You'll see microphones and mic placement techniques followed by a deep look at amplifiers and what to do when you're working with combos and stacks.
Fender’s arm when it comes to affordable quality guitars is the Squier. The Affinity Stratocaster is no push over. It has an ergonomically design contoured double cutaway body made of alder and has the C-shape all maple or with rosewood fingerboard neck patterned over an original Fender which contributes greatly to the guitars comfort and playabilty.

Some of the earliest electric guitars adapted hollow bodied acoustic instruments and used tungsten pickups. This type of guitar was manufactured beginning in 1931 by Electro String Instrument Corporation under the direction of Adolph Rickenbacher and George Beauchamp. Their first design was built by Harry Watson, a craftsman who worked for Electro String. This new guitar which the company called "Rickenbackers" was the first of its kind.
Adjust the volume and tone and engage the gain when you want to bust out some distortion riffs or throw your headphones in via the 6.3mm Jack headphone output which also doubles up as a preamp out. Enjoy silent practice anywhere or hook it up to your audio interface for studio recordings. A powerful little amplifier relied upon by guitarists when inspiration strikes. At under £30 it’s actually an essential purchase for musicians and one of the best music gifts ever – it’s certainly cheap, but it certainly doesn’t suck! Available in a range of different colours and as a double stack for extra volume.
One important thing to keep in mind about effects pedals is that the signal is doing a lot of work going through the complex electronics in them, and some effects play better as inputs for others. This all means that the order of your pedals does matter to some degree, depending on which effects are in the lineup. You can, of course, experiment to see how different orders affect the sound and that can be part of creating your own signature effects profile. But as a rule of thumb, here’s the basic order you should follow for your first foray into effects chaining:
The Custom Classic Telecaster was the Custom Shop version of the American Series Tele, featuring a pair of Classic and Twisted single-coils in the bridge and neck positions, as well as a reverse control plate. Earlier versions made before 2003 featured an American Tele single-coil paired with two Texas Special Strat pickups and 5-way switching. Discontinued in 2009 and replaced by the Custom Deluxe Telecaster series models. The 2011 version of the Custom Shop “Custom Deluxe” Telecaster featured a lightweight Ash body with contoured heel, Birdseye maple neck, and a pickup set that included a Twisted Tele neck pickup and a Seymour Duncan Custom Shop BG-1400 stacked humbucker in the bridge position.
-Would be nice to edit the string colors, add training modes telling you which finger to hit the note with, how many times to play through a sequence (so you learn/memorize the song, vs just respond to the game - i.e is the chorus sequence repeated 4 times before moving onto the next part of the song?),indicating strumming patterns to help with timing (newbies tend to down pick everything and just pick faster when the notes are closer vs switching to an up-down strum) etc.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: electric guitars","pageName":"[gc] shop: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] shop: guitars: electric guitars","prop6":"[gc] shop: guitars: electric guitars","prop3":"[gc] shop: guitars: electric guitars","prop4":"[gc] shop: guitars: electric guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}
Electric guitars and guitar equipment - want something new? Shop online and in-store for your new guitar setup. Pick from solid body, semi-acoustic, and hollow body styles to get your ideal electric guitar. We stock all the major guitar brands like Fender, Gibson, and Ibanez. Alongside electric guitars, you'll find amps and pedals from Marshall, Vox, and Orange.
Onboard effects had already appeared on various guitars, especially Höfner and Vox models, but these were not truly “active” in the modern sense. Alembic, with support from the Grateful Dead, was exploring active pickup systems, but these were still basically custom-made instruments. Both had a master volume and tone control with three-way select and a “band rejection filter tone switch,” also called a midrange bypass filter. Ovation was among the first to offer linear potentiometers to correlate movement with effect. Controls inside were mounted on a circuitboard with individual trim pots that can be adjusted to control the volume of each pickup.
The way you connect your amp, speaker and DI box depends on whether the DI box has a built-in dummy load.If miking isn't practical, or you don't want to find space for a soundproof speaker/mic box, then perhaps one of the available DI options will give you the result you need. I was once reviewing an analogue guitar preamp that provided several programs, both clean and overdriven, and I noted that one of the clean settings sounded really superb. When I checked the manual, I found this was the bypass position! The reason it still sounded good was that the unit was matching the high impedance of the guitar to the medium impedance of the recording system and, for clean sounds, you can get this same effect by using any good-quality active DI box that offers a high-impedance (500kΩ or more) input. A little compression will add density and 'spring' to the sound (experiment with the attack time to get the best 'pluck' sound, as too fast an attack can squeeze all the life out), while reverb will put back the missing sense of space.
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.
TRUE. Tommy can be good but I find he has a lot of filler and some overly fluffy tunes sometimes. It makes it sound like he’s trying too hard to play it with as many different chords as possible before finally landing the first note. (which is usually late). and for clapton below me I could agree but I think Jimmy Page’s playing is just as good but he’s more reckless. he’s reckless for good reason though, it’s like he’s transfering his feeling to it like Jimi Hendrix would but Page’s guitar sounds like your heart wanting to rip out of your chest to claim your biggest desire once and for all. The kind of vibe when you finally realize your in love after a LONG time of dullness. Jimi is groovy, and Clapton likes to serenade seeming like an old gentle man from any age.
{"eVar4":"shop: shopbybrand","eVar5":"shop: shopbybrand: palmer","pageName":"[gc] shop by brand: palmer","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[gc] shop by brand: palmer","prop1":"[gc] shop by brand: palmer","prop17":"sort by","evar51":"default: united states","prop10":"brands","prop11":"palmer","prop5":"[gc] shop by brand: palmer","prop6":"[gc] shop by brand: palmer","prop3":"[gc] shop by brand: palmer","prop4":"[gc] shop by brand: palmer","channel":"[gc] shop by brand","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] site section"}
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.

Description: Guitar Type: Acoustic/Electric - Body: Mahogany - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Bubinga (African Rosewood) - Figured - Sides: Bubinga (African Rosewood) - Figured - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Binding: Ivory - Frets: 20 - Inlay: Mother Of Pearl - Dot - # of Strings: 6 - Bridge Construction: Rosewood - Cutaway: Single - Soundhole: Round (Traditional) - Rosette: Mother Of Pearl - Hardware: Diecast, Gold, Grover Tuners - String Instrument Finish: Natural
Launch price: $299 / £199 | Body: Alder | Neck: Maple | Scale: 25.5" | Fingerboard: Rosewood | Frets: 22 | Pickups: Alnico V bridge humbucker 2x Alnico V single coils | Controls: Volume, tone (with push-pull coil-split), 5-way selector switch | Hardware: Vintage-style vibrato with block saddle | Left-handed: Yes (Pacifica 112J) | Finish: Natural Satin, Old Violin Sunburst, Raspberry Red, Sonic Blue, Black, Silver Metallic
Interesting idea Mike. I suppose you could run some kind of DC bias through the selector switch together with the pickup signals and you’d have to introduce appropriate DC blocking capacitors to contain the DC bias within the guitar… probably possible but a lot of work to get it right. Alternatively you could just look for one of the “super switch” types with more than 2 poles so you can do the LED control on a completely different circuit but driven by the same switch e.g. https://www.premierguitar.com/articles/Introducing_Fenders_5_Way_Super_Switch
By far the most convenient way to DI guitar is to use a digital preamplifier that combines amp modelling, speaker modelling and effects all in one unit. More flexible still is something like a Roland VG88. This requires the guitar to be fitted with a GK2 compatible hex pickup, but in return enables the system to model pickups and guitars as well as the rest of the signal chain. All these modelling systems sound different to each other and many guitarists say they don't 'feel' the same to play as going via a real amplifier, but, in many situations, the sound you record using them is very much like the sound you hear on records. As you hear exactly the sound you're recording over the monitors while you're playing, you know just how the end result will turn out, so there's little to be said about working this way other than to rely on your ears. Nevertheless, it is worth pointing out that some of the more unlikely combinations of amplifier models and speaker cabinet models can produce unexpectedly interesting results, so don't just rely on the factory patches, most of which I've found not to do justice to the products anyway. The morphing feature used in the Digitech Genesis 3 processor is also very creative, as it allows you to combine the characteristics of two completely different amp/speaker models, sometimes with surprising results.
The term cheap electric guitars doesn’t necessarily mean bad sounding and unplayable. It is a misnomer of a name given to affordable guitars, because they are still solid enough to fulfill most of the needs of a guitar player on sound, playability and be happy with the level of quality for its price. So without digging deep and emptying the pocket, here’s our list of the best electric guitars under two hundred dollars.
Purists might question why we’ve lumped loopers in with delays but the simple fact is that both pedals repeat an element of what you’ve already played. Both are also great for helping you come up with new ideas that simply wouldn’t be possible otherwise. Basically, loopers take similar technology and allow you to record entire passages of play, then ‘loop’ them back (i.e. repeat them) whilst you play something new over the top. Lay down a basic chord progression, then solo of the top of it. You don’t even need to bother with pesky drummers or singers! We’re joking, obviously. As a tool for practice, they’re unparalleled, but in creative terms they’ve opened the doors to entire new genres of music. Ed Sheeran, KT Tunstall and plenty of other solo singer-songwriters have employed loopers in their acts to great effect.
Jump up ^ Peterson (2002, p. 37): Peterson, Jonathon (Winter 2002). "Tuning in thirds: A new approach to playing leads to a new kind of guitar". American Lutherie: The Quarterly Journal of the Guild of American Luthiers. 8222 South Park Avenue, Tacoma WA 98408: USA.: The Guild of American Luthiers. 72: 36–43. ISSN 1041-7176. Archived from the original on 2011-10-21. Retrieved 9 October 2012.

Every year we bring a new opening act on tour with us, and every year I have the harsh task of going on stage after some of the finest players in the business. This summer’s tour was no exception. With Montgomery Gentry in the support slot of the Toby Keith Biggest and Baddest tour, I had my work cut out for me. Two of the best axe slingers the music scene has to offer—Frank Bowers and Bo “two-timechampion” Garrett—have some of the greatest chops and sounds on the circuit today.
In fact, these units were specifically designed to be used by the novices that want to learn the particularities of playing the guitar.Nevertheless, they are also purchased by veteran players because of their quality and maneuverability. As cost-efficient units, these guitars are a great investment, and you should consider them before placing any orders.
The Mahogany body and neck with rosewood fretboard makes it a highly resonant and great sounding guitar whilst the dual Alnico Classic pickups with push pull coil tapping provide a world of tonality. A SlimTaper D Shape neck profile makes it comfortable for beginners to learn on, whilst pro players will enjoy the ergonomic design 2 hours into their set or rehearsal! Available in more finishes here.
The Thunderhead guitars would be offered until June of ’72, with several model designation changes along the way. In ’70, the K-1360 became the K-1213, and in May of the following year changed again to the K-1233. At the same time, the vibrato-equipped models also changed, the K-1460 becoming the K-1214 and then the K-1234. The Tornado lasted until the end in January, ’73, but also went through the model number changes along with the Thunderheads, the K-1160 becoming the K-1211 and then the K-1231. The vibrato Tornados went from K-1260 to K-1212 and then K-1232.

While the number of effects may not be as many compared to recent releases, others don't have the same deep control and sound quality that the GT-100 provides. Speaking of control, instead of merely choosing your preferred amp, this processor lets you custom build your virtual amp and cabinet, an interesting feature that allows for even more freedom in crafting your own tones. Another feature that users are fond of is the ability to assign effects into its many footswitches, making the unit behave much like a regular pedalboard. Other notable features include polyphonic tuning and USB recording.
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
SolidBody (2008) – Taylor’s take on a traditional solid electric guitar. Made from a solid slab of wood with cavities only for the pickguard or direct mounted pickups, and the bridge. Designed from the ground up, each SolidBody model features solderless pickups or a solderless pickguard which permit for musicians to effortlessly change the sound of their guitar. The SolidBody line is fully customizable with a wide combination of wood, colors and electronic configurations, and single or double cutaway options which enables anyone purchasing a SolidBody to get the sound and look that they want. All options are available for customization through Taylor’s SolidBody Configurator on the Taylor website.
New, used, nylon or steel string — or electric — for your first guitar take your time, choose carefully and never be afraid to ask for advice. Best of all, search for a good music shop near you and actually pick up the guitar, pluck the strings, listen to the sound. The people behind the counter want to help you, so that you come back for another guitar — and another, not to mention strings, string cleaner, capos… Don’t forget, this isn’t just buying any old guitar. This is the beginning of your dream coming true.

As a guitarist with a complete understanding of the vintage instruments he worked on, Novak wasn't completely comfortable with what any one instrument was capable of delivering. He wanted to combine all the features of his old favorites while adding design twists that would give him everything he was looking for in an electric guitar. This led to the invention of his patented fanned-fret fingerboard, which gives an instrument combined scale lengths.
Catalan guitar is most well recognized as being extremely romantic, often with a slow tempo and careful attention paid to tone quality, note sustain, and voice leading. In contrast, Catalan guitar can also be brilliantly virtuosic, with tempi in excess of 160 beats per minute. Unlike flamenco's improvisational tradition, Catalan guitar music is composed and meticulously notated.
The Blueridge BR-160 Historic Series dreadnought features classic vintage styling with modern improvements. For its Historic Series, Blueridge took inspiration from guitars made before the Second World War. However, instead of using the rarer and restricted woods such as Brazilian rosewood used in vintage guitars, Blueridge opted to use more abundant tonewoods that produce the same sound quality.
Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.
Raising the speaker cabinet off the ground varies the path length of reflected sound reaching the microphone, which can usefully alter the sound in some cases.One way to capture the sound of a large stack, unsurprisingly, is to set up the stack in a large room, play loud and put the mic several feet away so that the combination of all the speakers can be recorded, along with any floor reflections and the subtle filtering effects these may cause. Using this method, the mic 'hears' the guitar sound much as an audience would. Nevertheless, the most common approach is to close-mike the amp with the mic set up very close to the speaker grille and pointed directly at the centre of the speaker cone — where the cabinet has multiple speakers, it's traditional to deliberate over which one sounds best and then mic that one!). Moving the mic to one side produces a less toppy sound, so before reaching for the EQ knob you should try moving the mic.
Reverb is the persistence of sound in a particular space after the original sound is removed. When sound is produced in a space, a large number of echoes build up and then slowly decay as the sound is absorbed by the walls and air, creating reverberation, or reverb. A plate reverb system uses an electromechanical transducer (actuator), similar to the driver in a loudspeaker, to create vibration in a plate of sheet metal. A pickup captures the vibrations as they bounce across the plate, and the result is output as an audio signal. A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. Guitar amplifiers frequently incorporate spring reverbs due to their compact construction. Spring reverberators were once widely used in semi-professional recording due to their modest cost and small size. Due to quality problems and improved digital reverb units, spring reverberators are declining rapidly in use. Digital reverb units use various signal processing algorithms in order to create the reverb effect. Since reverberation is essentially caused by a very large number of echoes, simple DSPs use multiple feedback delay circuits to create a large, decaying series of echoes that die out over time.

Still in the line in ’41 was the Supro Amplifier No. 50, now also called the Supreme. This had been given an updated look, with rounded corners on the cabinet and a slight narrowing taper toward the top. It still had the round grill with two horizontal bars. It was now covered in tweed, with a tweedy grillcloth, and a flat leather handle. The oval logo plate still graced the upper left corner. The back exposed the chassis, with twin inputs and volume control on the bottom. It still had five tubes, 12 watts and a 10″ speaker. In April of 1942 the Supreme amp cost $76.50. This amp would make it all the way to the proverbial end of the line.


{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings: guitar strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"acoustic guitar strings","eVar18":"03e64461-af2b-4a48-8533-e7748b0554d2","prop5":"[gc] shop: accessories: strings: guitar strings","prop6":"[gc] shop: accessories: strings: guitar strings","prop3":"[gc] shop: accessories: strings: guitar strings","prop4":"[gc] shop: accessories: strings: guitar strings","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}

If you are recording the output of a bass amp, try to use a mic that will capture more of the low-end than a typical stage mic. An SM57/58 will work, but a mic with a more extended low-frequency response would be a better choice. The Sennheiser 421 is often used, as is the classic kick drum mic, the AKG D112, which has a bumped-up response tuned specifically for low-pitched instruments. I prefer the Electro-Voice RE-20 (you know, the “announcer’s mic”)—it’s more neutral, and it has an extended low-end response, so you’ll get not just boom, but real depth.


The beauty of the Yamaha FG800 Acoustic goes way beyond skin deep with its solid Sitka spruce top complemented by a Nato back and side. The mellow, well balanced tone offers excellent note definition, worthy of dreadnoughts costing far more. Quality materials such as a rosewood bridge and fingerboard, black and white body binding and more make FG Series acoustics sweet buys with a great reputation.
{ "thumbImageID": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard/K35721000002001", "defaultDisplayName": "Gibson Les Paul Tribute 2018 - Solid Body Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Gold Vintage White Pearl Pickguard", "sku": "sku:site51500000137390", "price": "1,149.00", "regularPrice": "1,149.00", "msrpPrice": "1,919.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Tribute-2018-Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard-1500000137390.gc", "skuImageId": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard/K35721000002001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Satin-Gold-Vintage-White-Pearl-Pickguard/K35721000002001-00-60x60.jpg", "imgAlt": "" } , { "name": "Faded Honey Burst Vintage White Pearl Pickguard", "sku": "sku:site51500000137389", "price": "1,149.00", "regularPrice": "1,149.00", "msrpPrice": "1,919.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Tribute-2018-Solid-Body-Electric-Guitar-Faded-Honey-Burst-Vintage-White-Pearl-Pickguard-1500000137389.gc", "skuImageId": "Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Faded-Honey-Burst-Vintage-White-Pearl-Pickguard/K35721000001001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Tribute-2018--Solid-Body-Electric-Guitar-Faded-Honey-Burst-Vintage-White-Pearl-Pickguard/K35721000001001-00-60x60.jpg", "imgAlt": "" } ] }
×