The E minor chord is one of the simplest to play because you only use two fingers Take extra care not to allow either of them to touch any of the open strings, or the chord won't ring properly. Strum all six strings. In certain situations, it may make sense to reverse your finger position so that your second finger is on the fifth string, and your third finger is on the fourth string.
Guitars feature many different styles of hardware which have different uses. There is usually a direct relationship between a guitar’s cost and the quality of its hardware. Better hardware can make a difference in a guitar’s tuning stability and versatility. As you can imagine, this is an area where many improvements and upgrades can bring a host of benefits to the user. The most significant hardware components are tuning machines, bridges and tailpieces.
Had a seven string Ibanez with loose/worn frets worked on. Steve knew right away that the frets had to be tacked and it could use a fret re-crowning and gave me a quote for 125$. I thought it was a bit high but trusted him because of the good reviews. Came back a couple weeks later and he had re-crowned the frets, tacked all the loose frets, tightened down some more loose hardware and did a set-up for only 100$. I am overall quite satisfied with the quality of the work and the pricing. I will be going back to have my acoustic worked on.
In nature, reverb is an extremely fast series of echoes that reduce in volume over time.  Depending on the size of the environment, the number of repeats and the timing at which they occur will change.  Digital reverb pedals are very good at replicating the differing types.  Basically, you can take small tiled bathroom and the Grand Canyon (and everything in between) with you to your gigs.
Acoustic guitars were always subjected to various limitations. Since the body of the guitar is its own source of sound amplification, we had to find other ways to get the sound out there. One of the most popular ways was to put a microphone in front of the instrument. This is a method that is still heavily used today, although it's cumbersome and inconvenient in a lot of applications.
Another reason that some bassists prefer the "bass stack" approach is that it is much easier to customize a separate preamp/amp/speaker cabinet setup with a bass stack than it is to customize a combo amp. With a bass stack setup, a professional bassist can handpick the brands of preamplifier, graphic equalizer, power amplifier and speaker cabinet(s) they wish to use. It is also much easier to replace defective components with a bass stack than with a combo amp. If the power amp on a combo amp fails, only an electronics technician can repair or replace the power amp. With a bass stack, in which the power amp may be a separate component in a rackmount road case, the defective power amp can be removed with only a screwdriver and a new power amp can be mounted in the rack and connected to the other components. This facilitates replacement of components while on tour. Touring bassists may travel with one or more backup amplifier heads, to use in case the main amplifier head develops a technical problem.
Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.

The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.


Dick Dale: Nicknamed “The Beast” by Dale himself, the guitar comes in “chartreuse sparkle” (a greenish-gold color) with a white pickguard and rosewood fretboard, with vintage 50s features and a number of custom modifications. Notably, the guitar comes with a reverse headstock and a reverse angled bridge pickup to achieve the sound of playing a Stratocaster upside-down, which was how Dale learned to play.
I have an acoustic that I bought from a lady I know who said she has had it since the early 70's. It says 'Maya' on the headstock and the reinforcement rod cover is stamped with 'Takamine'. The sticker inside the sound hole says 'Maya', "We made this guitar for the people who love guitar music", Made by Takamine, Model No. TF1o1S, Japan. On the inside of the sound hole at the top, the wood block there is stamped with 46.6.3. The guitar is only about 3 1/4 inches deep and approx. 15 inches wide at its widest spot. Small guitar with a big beautiful sound.
The size and shape of the ME-80 is comparable to the Line 6 POD HD500X, though the Boss measures a few inches smaller, and also weighs a few lbs less. This is a Boss product, and as such it’s built like a tank. No worries whatsoever over the build quality of the chassis, knobs, and footswitches. Starting with the rear of the ME-80, you can see the I/O is pretty basic - mono input for your guitar, stereo output, a headphones jack, AUX in (so you can plug in your iPhone and jam along to your favorite tracks), and a USB port. Like the Zoom G3X and the Line 6 POD HD500X, you can use the Boss ME-80 as a USB interface for your computer and record your guitar straight into your favorite DAW. Oh and one small inconvenience is that you’ll need to buy the power supply separately. Why Boss doesn’t just include one for a unit of this quality and price, we don't really understand. If you do end up getting the ME-80, this is the power adapter you want. It can also use 6 AA batteries which is good if you need to use this on-the-go, but we don’t recommend it as it will suck those batteries dry in no time.
Delay is essentially echo, but it can be so much more when used well. The two most important knobs are “time” and “repeats”. Time will increase the length between repeats, and repeats will adjust how many echoes are heard. While it is tempting to max the repeats and enter space rock land, less can be more. Used gently you can get reverb or slap-back rockabilly sounds. With careful knob setting you can even create harmonies and loops like The Edge.
One final thought, although we're selling guitars here this is clearly a labor of love. If VintageSilvertones.com works out and can sustain itself we will be expanding the site. If you're not into buying a guitar now you can pick up a cool T-Shirt with a Rockin' Silvertone Guitar on it!. We will be adding new designs shortly to the t-shirt offerings. So stay tuned for more information or not!

Bass players who do not have a combo amp who are playing live shows can connect their bass to a DI unit and from there to the PA system. In a well-equipped nightclub or music bar, the audio engineer can then route the bass signal to a stage monitor suitable for bass, so the bass player and band can hear the bass tone. Some standalone bass preamplifier pedals have a DI output, so this output can similarly be connected to a PA system. Bass players who are playing in small venues (coffeehouses, small pubs, etc.) will typically need to bring their own bass combo amp (or an alternative amp, such as a keyboard amp combo), because very small venues often have a very small, low-powered PA system which is used mainly for vocals. Some small venues do not have monitor speakers, or they have only one, in front of the lead vocalist. Bass players who do not have a combo amp who are laying down tracks in the recording studio can plug into a DI unit (any professional recording studio will have one), which is connected to the audio console; the audio engineer can provide the bassist with the sound of their instrument through headphones.

The flanging effect is created by mixing two identical signals together while delaying the second signal by a small and gradually changing period of time. This delay is often no longer than 20 milliseconds. A simple way of thinking about the differences between phasers and flangers is that phasers work by affecting the frequencies with a filter, while a flanger affects frequencies with a time-delay.
If you’re one of those “I plug directly into the amp and don’t need no stinkin’ guitar effects pedals” kinda dude, then godspeed and thanks for stopping by. On the other hand, if you own a pedal board upon which you trip the light fantastic, stick around — this list of guitar effects pedals you must have will validate what you might know, illuminate what you don’t know, and quickly help you generate a massive and highly versatile sound palette.
In addition to pickup selection, most guitars will have controls for volume and tone. Volume controls simply regulate the strength of the output signal. Depending on the amplifier, this can control the tone as well as the volume. Most tone knobs control high frequencies and many guitars have separate tone controls for each pickup. This can vary a guitar’s sound between soft, warm, and mellow to a very bright, raw, distorted sound.
Here we have another Vintage Japanese GREAT find this example a beautiful pretty much exact copy of a vntage Martin D-45 ... this is a very High Quality built Lawsuit era Aria Pro II Model AW40. Made in Japan. From information on the Internet concerning dating these, the guitar's serial number would lead to 1976 manufacture. However, I could not find the AW40 model cataloged until the late 70's... but its a 76.. is consistent with all others. THIS is one beautiful guitar! it exudes fine detailed craftsmanship this was Aria's flagship dreadnought of this time period with D41-ish features. From an original vintage Aria catalog, AW40 features include: "Dreadnought sized, Solid Sitka Spruce top, Solid Brazilian Rosewood back and sides, bridge fingerboard and veneer headstock overlay with MOP logo, Marquetry Purfling" ( Top looks to be solid with the sides & back appears to me to be laminated )The catalog can be viewed at matsumoku.org, a site that deals with the history of Matsumoku made instruments like Aria, Electra and others. This guitar has the Martin classic snowflake mother of pearl inlays, abalone binding and rosette, and fully bound headstock and gorgeous rosewood fingerboard. Headstock also has a Rosewood overlay. The bookmatched rosewood on the back side is especially easy on the eyes. The guitar is all original with no repairs and with original tuning keys. It is in JVG Rated condition as excellent used vintage 8.8/10 WoW...its 35 years old and the woods have opened up now like fine wine the tone is richer & mellowed as only time can provide. No cracks or repairs ever. It plays very well with good action and has a nice warm rich tone. The Neck is arrow straight. Frets have minimal wear with no buzzing anywhere on the fingerboard....this is the one! At this link you can view more pictures of this guitar please cut & paste the following link: https://picasaweb.google.com/gr8bids/AriaPro2AW40D45BrazilianRosewood?authkey=Gv1sRgCOmS2c3RvMGpUg#slideshow/5609409732594635106.
I became more and more frustrated with as my playing did not mach my ambitions at all. I tried to listen to records to figure out what was being played. I tried to come up with the proper techniques on how to play the riffs that I could hear. I tried to make my guitar and my playing sound the way it should. But, even after long hours, it always felt like I did not quite get there. What I really wanted, was to be a Rock Star!The written music available in the music stores was expensive and incomplete. There was nobody around who could make me understand what a power chord was, how to mute individual strings while letting others ring.  I was locked in my open chord basic folk guitar strumming background. I knew that I needed a totally new approach to become the lead, riff and chops playing blues pop and rock guitar player I wanted to be.  And there was no way that I could see how to simply snap out of my predicament…….
After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.
You probably won’t have to do this, but if you do, here’s how to go about it: First, slacken the affected strings and move them to the sides of the saddles. Then take some needle-nose pliers and remove one end of the retaining spring (different styles of bridge will use different types of retaining spring – sometimes there is an individual one for each saddle, in which case you might even need to remove the whole bridge to do this).
If you have ever played or listened to metal, you probably know about Ibanez. This brand has been around for a while and has become a patron saint of those who like harder sounding music. Built for speed, Ibanez guitars bring are finely tuned instruments which enable the player to explore the limits of their skill. On top of that, any Ibanez guitar is going to be great value for the money.
There’s plenty of substance under all that style, too. Two DiMarzio-designed Fusion Edge humbuckers power the S series axe—they aren’t exactly after-market pickups, but are designed in collaboration between Ibanez and the pickup brand. These ceramic humbuckers are aggressive, articulate and loud, ideal for modern metal. And for a touch more versatility, both pickups have also been coil-split.
Treadle-based volume pedals are used by electric instrument players (guitar, bass, keyboards) to adjust the volume of their instrument with one foot while their hands are being used to play their instrument. Treadle-style volume pedals are often also used to create swelling effects by removing the attack of a note or chord, as popularised by pedal steel guitar players. This enables electric guitar and pedal steel players to imitate the soft swelling sound that an orchestra string section can produce, in which a note or chord starts very softly and then grows in volume. Treadle-based volume pedals do not usually have batteries or require external power. Volume effects: Electro-Harmonix LPB-1, Fender Volume Pedal, MXR Micro Amp, Ernie Ball Volume Pedal.
Designed to restore Fender’s reputation after a group of employees led by William C. Schultz took over ownership from CBS in the early 1980s. The pickups used in early models were dual humbucking Red Lace Sensors in the bridge position and a single Blue Lace Sensor in the neck position. Later models (post 1995 or so) used three Gold Lace Sensors or a Red/Silver/Blue set in a Strat-like configuration, as well as low-friction roller nuts, locking synchronized vibrato bridge and tuners, and a bound contoured alder body with ash veneers. These instruments were discontinued in 1998 with the advent of the American Deluxe series. In 2011 Fender released the Modern Player Telecaster Plus as a part of the Modern Player series. The guitar has a humbucker in the bridge, a Strat pickup in the middle, and a Tele pickup in the neck positions.
Each Proto Pedal comes as an easy-to-assemble PTH soldering kit, and it’s up to you to solder it all together! Additionally, we highly recommend using the Proto Pedal Enclosure with this kit. It’s a standard-size cast aluminum box, which does double duty as an assembly jig to help get the jacks and switch aligned correctly. We did NOT include the enclosure with the Proto Pedal to help keep the kit affordable – and in case you already had an enclosure you wanted to use or create yourself.
Alder used to be very popular in the 1950s and 1960s, and many Fender guitars from that era are made from Alder. Today it is a bit more expensive of a wood, relatively, and isn’t as common. It is lightweight, has beautiful grain patterns, and gives a warm sound with plenty of highs. An instrument made from Alder is likely to have less midrange and bass than instruments made from other types of wood.
Unassigned maker badge names are AGS, Alex, Andre, Aquila, Asco, Avon, Axiom, Bradley, CG Winner, Clear Sound, CMI, Columbia, Commodore, Cortley, Crestline, Crown, D. Lewis (?), Danelectro, Dynelectron (some), Diplomat, Dixon, Dorado, Eagle, El Degas, Exceltro, Exper, Encore, Fandel, Garzia, Goya, Grant, Grenn, Laguna, LTD, Magnum (?), Maier, Monroe, Marchis, Mark II, Masaaki (?), Matador, Norwood, Palmer, Prairie, President, Rodeo, Sanox, S.G.C., Splender, Stella, Targa, Taro, Voxton by Vox, and Yoshi. Some of these badges are attributed to the importer as the 'maker', which is untrue. It's possible that some of these badges were made by smaller Japanese manufacturers that have faded into history.
All Vintage V6’s offer an extraordinarily high level of specification including the revered Wilkinson WVC original specification vibrato featuring authentic bent steel saddles for that classic sparkle and tone; precision machined pivot points for total ‘return to pitch’ accuracy and a stagger-drilled sustain block to prevent string hang-up. An adjustable, ‘vintage bend’ push-in arm completes this definitive vibrato system..
Solid-body electric guitars are the most common style on the market today. The first widely-available solid-body electric was the Fender Broadcaster, which later evolved into the Telecaster. It was super simple compared to other electrified instruments that came before it, and the basic design premise continues on in every solid-body instrument to this day.
Best acoustic I've owned. It's an Oregon dreadnought, an all round stunning looking guitar. The sound is beautifully balanced, clear with nice defined bass, sits perfectly in the midrange and projects well without being too bright. It's light weight with meticulous craftsmanship and beautiful timber. When you look at these guitar it's obvious that they are built with a lot of care and attention to detail.

I’m not a Fender amp guy at all. I know, a lot of people swear by them, and they do sound great, and are a standard in the indie world. They tend to have less options and features that a beginner might want to play around with, and to get those options you end up spending more money than you might be comfortable with. You also don’t get much horsepower for the cash compared to some of the other lower priced options. To me, a cheap Fender sounds like…a cheap Fender. Blues guys sure do love those Mustangs though.

The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.

The case was settled on August 6, 2012, with Gibson admitting to violating the Lacey Act and agreeing to pay a fine of $300,000 in addition to a $50,000 community payment. Gibson also forfeited the wood seized in the raids, which was valued at roughly the same amount as the settlement.[47][48] However, in a subsequent statement Gibson maintained its innocence with Juszkiewicz claiming that "Gibson was inappropriately targeted" and that the government raids were "so outrageous and overreaching as to deserve further Congressional investigation." Juszkiewicz continued to state, "We felt compelled to settle as the costs of proving our case at trial would have cost millions of dollars and taken a very long time to resolve."[49]
You can run up to six of the 112 built-in internal effects within the Boss MS-3 Multi Effects Switcher at the same time and integrate three of your existing stompboxes into that sound too. So, to say there’s a world of options at your feet is an understatement. You can use it with your hybrid MIDI gear and utilise it to channel switch between amps too.

Bass amplifier equipment manufacturers include a variety of different types of companies, ranging from companies that only make individual components (e.g., Accugroove loudpeakers, a speaker manufacturer) to companies that only make bass amplifiers and loudspeakers (e.g., Gallien-Krueger). At the other end of the spectrum are companies that offer bass amplification equipment as part of a much broader offering of different types of instrument amplifiers and public address systems (e.g., Peavey, Carvin A&I or Yorkville Sound.)
very recently I've been trying to get a band together where the Humbuckers of my les paul would suit the sound a lot more and decided to pull out my les paul, on trying to tune it, I noticed the intonation was a little off on all strings (not particularly noticeable by ear, but plugged into a tuner one could see it was off), but on the high E string it was very much off, from the third fret and higher it is very off sounding.
Another way to apply vibrato is by way of the whammy bar, AKA the vibrato arm. This comes especially in handy when you’re fretting high on the neck in areas where it would be difficult to apply finger-based vibrato. Another instance is bending. Some players find it more comfortable as well as stable to use the bar while holding a bend steady to ensure better overall intonation.
If, like me, you're a complete and utter sucker for watching musicians strip their songs down to the barest essentials and perform them with minimal accompaniment, then you're going to lose your mind over the stripped down, guitar version of "Wildest Dreams" that Taylor Swift has just dropped from her acoustic session at the Grammy Museum Sessions last year. Performing the hopelessly dreamy song with just her voice and her electric guitar, the performance is jaw droppingly good and the song honestly sounds even better than it does on the studio track from 1989.

The Taylor Guitars factory tour takes guests through the steps of acoustic guitar construction. From wood selection to final assembly, guests will experience each process as a guitar evolves from raw wood into a finished instrument. You will also have an opportunity to visit the TaylorWare store. Here you will find everything for the Taylor fan, from apparel to gift items to replacement guitar parts. The tour lasts approximately one hour and 15 minutes and departs from the main building at 1980 Gillespie Way in El Cajon, California.
(Book). To mark the 60th anniversary of Fender, Backbeat's introduced a new, completely revised third edition of this bestseller. Fender guitars have long been the instruments of choice for artists such as Jeff Beck, Eric Clapton, Jimi Hendrix and Stevie Ray Vaughan. This book tells the complete story of Fender guitars, detailing classics such as the Telecaster, Stratocaster & Jazzmaster as well as lesser-known models. Dozens of photos reveal Fender's storied craftsmanship, while the text includes collector details for all models. The reference section lists all models and their statistics. This new edition has been refreshed and updated, with 56 extra pages and over 60 new photographs. The main text has added material and has been brought up to date to cover Fender's ever-changing history amid the fascinating developments for the company and its instruments during the eight years since the previous edition.

Semi-acoustic guitars have hollow bodies which give them a warmer and more dynamic range of sounds. They are vulnerable to unwanted feedback as the distorted sound increases the chances of feedback. That’s why we don’t see rock and metal musicians playing a semi-acoustic guitar. Many guitars have solid blocks inside for decreasing the feedback factor. Check out our list of semi-acoustic electric guitars here.
There are two main types of pickup you’ll find on a guitar suitable for beginners: a single-coil pickup and a humbucker pickup. Without bogging you down in the details of how they work, the single-coil is the classic original pickup, which typically offers a bright and sparkly sound. As they cut through the mix, single-coils are excellent pickups for lead players. Then comes the faithful humbucker, which – as the name suggests – ‘bucks’ the hum, meaning less background noise. Humbuckers produce full, meaty sounds found across the world of rock and metal, and are great for lead and rhythm guitar. However you can still play fast punk rock powerchords with a single-coil, just like you can play an upbeat country number with a humbucker! You’ll usually find two or three pickups on a guitar, although some models will offer just one. Guitars with two or more pickups will come fitted with a pickup selector switch to quickly change between them.

Pitch-shifters work by slicing the incoming audio into extremely short sections (typically a few tens of milliseconds long) and then lengthening each section where the pitch is to be decreased, or shortening each section where the pitch is to be increased. Though cross-fading algorithms and other techniques are used to hide the splice points, most pitch-shifters tend to sound grainy or warbly when used to create large amounts of shift (a couple of semitones or more), though they can sound very natural when used to create subtle detuning effects, using shifts of a few cents. A refinement of the system, designed for use with monophonic sources, attempts to synchronise the splicing process with whole numbers of cycles of the input signal, which makes the whole thing sound a lot smoother but, as soon as you present these devices with chords or other complex sounds, the splices again become audible.

Very nice. I'd love to hear it. 12 strings seem to emphasize the difference among guitars, the 335-12, the Firebird 12, etc. I like the sound of the Rick, but playability is an issue, you might go through three or four before one feels right, then they are so easy to pull out of tune. But you've got a totally unique variety one of a kind variety there.
Here we ( SOLD ) are very proud to offer a USA built Martin Acoustic electric the model # JC-16RGTe.... More info soon to come and more pics as well... near mint condition like new! Everyone from Eric Clapton to Sting to Johnny Lang has played a Martin guitar, and professionals and amateurs alike know the bright sparkle and deep, resonant tone that Martin guitars have become famous for, from the most high end acoustics to the Backpacker. Carefully hand-selected tonewoods, master craftsmanship and beautiful finishes and styles make Martin acoustics a class all their own, and must be played to be believed. Martin sets the standard for acoustic guitars, and since 1833 has been a leader in guitar innovation and craftsmanship. The following info is from Martin. Martin JC16RGTE Features: * CONSTRUCTION: 1 Style; Ply Blocks; Mortise/Tenon Neck Joint * BODY SIZE: D-14 Fret CUTAWAY * TOP: Solid Sitka Spruce * ROSETTE: Bold Herringbone * TOP BRACING PATTERN: D1 Hybrid * TOP BRACES: 1 Style/Scalloped * BACK MATERIAL: Solid East Indian Rosewood * SIDE MATERIAL: Solid East Indian Rosewood * ENDPIECE: White Boltaron® * ENDPIECE INLAY: Black/White Boltaron® * BINDING: White Boltaron® * TOP INLAY STYLE: Multiple Black/White * NECK MATERIAL: Solid Spanish Cedar * NECK SHAPE: Modified Low Oval * NUT MATERIAL: White Corian® * HEADSTOCK: Solid/6 String No Diamond/Standard Taper * HEADPLATE: Solid East Indian Rosewood/ Raised Gold Foil Logo * HEELCAP: Solid East Indian Rosewood * FINGERBOARD MATERIAL: Black Micarta® * SCALE LENGTH: 25.4" * # OF FRETS CLEAR: 14 * # OF FRETS TOTAL: 20 * FINGERBOARD WIDTH AT NUT: 1 11/16" * FINGERBOARD WIDTH AT 12TH FRET: 2 1/8" * FINGERBOARD POSITION INLAYS: 28 Style * FINGERBOARD BINDING: White Boltaron® * FINISH BACK & SIDES: Semi Gloss/ Dark Filler * FINISH TOP: Polished Gloss * FINISH NECK: Semi Gloss/ Dark Mahogany Stain/ Dark Filler * BRIDGE MATERIAL: Black Micarta * BRIDGE STYLE: 1 Style Belly * BRIDGE STRING SPACING: 2 1/8" * SADDLE: 16" Radius/Compensated/White Micarta® * TUNING MACHINES: Chrome w/ Small Knobs * RECOMMENDED STRINGS: Martin MSP 4100 Light Phosphor Bronze * BRIDGE & END PINS: White w/ Black Dots * PICKGUARD: I-02 Tortoise Color * ELECTRONICS: Fishman® Prefix Premium Stereo Onboard Blender .

Playing guitar is an exercise in memorization. There’s really no way around it. You have to remember stuff, and the primary thing you have to remember is where notes are on the fretboard. Eventually, muscle and ear memory will kick in and the remembering will get easier, but for the first little while, every time you play guitar, it’s like a pop quiz. It’s not fun to memorize something by brute force, but it pays dividends.

The biggest determining factor on how easy a guitar is to play is the 'action' - distance from the strings to the neck. When it is very low it is easy to press the strings down to touch the fret; when it is too low the strings will buzz when you play. If a guitar's action is too high it will be very hard to play, and for a beginner, this can be pretty disheartening.
Fred’s wife Lynn Shipley Sokolow served as our student tester. She plays double bass and banjo in the Americana quartet Sugar in the Gourd but is just starting to learn her way around the electric guitar. I also got Wirecutter’s John Higgins to give me his opinions of the amps; he is a Los Angeles session musician and frequent Wirecutter contributor who has a master’s degree in music from the University of Southern California and more than 10 years’ experience teaching music at private schools.
If you’re new to the world of guitar pedals, it can be a little daunting if you’re thinking to yourself “which guitar effects pedals do I need?”. Maybe you’ve bought your son or daughter a new guitar for Christmas or their birthday, or you’ve decided to really get serious when it comes to changing your sound up and you want to know where to start, what guitar effects pedals do and what sounds different guitar pedals make. Either way, we’re here to help with our handy guide to guitar effects pedals, complete with sound examples.
In May 1965 Keith Richards used a Gibson Maestro FZ-1 Fuzz-Tone to record "(I Can't Get No) Satisfaction".[24] The song's success greatly boosted sales of the device, and all available stock sold out by the end of 1965.[25] Other early fuzzboxes include the Mosrite FuzzRITE and Arbiter Group Fuzz Face used by Jimi Hendrix,[26] the Electro-Harmonix Big Muff Pi used by Hendrix and Carlos Santana,[27] and the Vox Tone Bender used by Paul McCartney to play fuzz bass on "Think for Yourself" and other Beatles recordings.[28]
STORCH is a virtual instrument, designed with the participation of ambitious music producers and beat-makers. This dynamic software is influenced by the legendary brand sounds of Scott Storch and includes 300 presets, divided into 18 categories of instruments. Categories include: Stringed, Drums, Dirty Pianos, Reversed EPs, 808, Arps and more. Moreover, users can create their own original sound...
It’s easy to remove your pickup or pickguard and slide some foam rubber behind the unit. Start with soft foam first, and then increase the density to find the difference you like. Conveniently, the gray foam used in aftermarket pickup packaging makes great damping material: It’s soft enough that you can double it up (see Fig. 1 and 2) to create more pressure on the pickup’s back plate, too. This is a relatively no-frills mod that requires minimal materials and tools.

My father's Yamaha was bought in the 90's, and was the first guitar steel-string I ever played as a kid. (If you were curious its equivalent to today's model would be the LS6 ARE). To this day I still find myself going back to it. It's little quirks makes it really special, even though I have martins and taylors and even gibsons. There's little nicks and chips in the paint in some places, which really shows it's history. It's also stood the test of time. It still plays great after almost 30 years of being lugged around from place to place, dropped, hit against walls, etc. It's just simply great. - zabathy1
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
Distortion and overdrive are forms of audio signal processing used to alter the sound of amplified electric musical instruments, usually by increasing their gain, producing a "fuzzy", "growling", or "gritty" tone. Distortion is most commonly used with the electric guitar, but may also be used with other electric instruments such as bass guitar, electric piano, and Hammond organ. Guitarists playing electric blues originally obtained an overdriven sound by turning up their vacuum tube-powered guitar amplifiers to high volumes, which caused the signal to distort. While overdriven tube amps are still used to obtain overdrive in the 2010s, especially in genres like blues and rockabilly, a number of other ways to produce distortion have been developed since the 1960s, such as distortion effect pedals. The growling tone of distorted electric guitar is a key part of many genres, including blues and many rock music genres, notably hard rock, punk rock, hardcore punk, acid rock, and heavy metal music.
In my own (first) project guitar, I did not know quite what to expect, so I built it with HSH pickups and two complete signal paths. The humbucking path uses 500k pots and an 0.047 cap; the single coil path uses 250K pots and a 0.022 cap. I did this with stacked, concentric CTS 250K/500K pots and an on/on toggle switch, all within the minimal confines of a standard Telecaster control plate. I created a custom 5-way selector switch to isolate the single-coil wiring from the humbucking combinations, but in the end when I flip the switch I opted for just the stand-alone single coil for the warmest sound. As I said above, the tapped humbuckers just didn't compare. This project is a work in progress; I hope this helps you find your own path.
The problem is that most of those beginner guitar books just don’t have enough information to give you the tools that you need to advance past the curriculum in the book. They won’t tell you about some of the more important aspects of theory, and they generally won’t give you exercises or warm-ups that will help carry you into becoming an intermediate or advanced musician.
Chorus – This is the subtlest type of modulation effect. It does exactly what its name suggests, making it sound as though multiple instruments are all playing in unison. The effect could be compared to running a signal through two amps at once and setting one on a slight delay; in fact, that’s how many artists created chorus effects before these pedals were commonplace.
Anything for which they are wired and/or programmed.  One great example is my first real guitar, a Carvin V220.  It had two humbuckers in a sorta heavy angular gibson explorer body.  Each pickup had volume and tone with a 3 way selector for either or both pickups to be on.  In addition, you could toggle switches to split coils on the humbucker to do a good approximation of a single coil pickup.  Further, you could toggle in/out of phase to get a Peter Green tone or other effects.   Tom anderson guitars have great configurations.  I have gone to lighter strats in recent years and usually replace the pickups with handwounds and customize my 5way switch depending on the guitar.   I love true single coils except that I prefer a humbucker in the bridge. 
The coolness in ’38, however, lay in two lap/amp combinations, the Supro 60 Electric Combination and the Portable Supro 70 Electric Combination. Both featured the little pearloid Supro Electric Hawaiian Guitar tucked into an amp-in-case! The Supro 60 featured a rectangular case with an 8-tube amp and 4″ speaker. This amp had to be plugged in, but was definitely boss. The combo cost $60. The Portable Supro 70 combination featured the same amp but operated with batteries (“…available at any radio supply house”). Most folks are conversant with Nat Daniel’s amp-in-cases from the early ’60s, but the idea was actually developed a good 25 years earlier. Actually, Daniel may have invented the first amp-in-case in 1936, with the amps he made for the first Epiphone Electar C steel guitars. These apparently had an amp built into the case, however, they were quickly replaced with a separate Model C amplifier. There’s no evidence that the Supro was a copy of the earlier Epiphone, but the idea was clearly around at the time.
Launch price: $2,799 / £2,399 | Body: Laminated maple | Neck: Maple | Scale: 24.6" | Fingerboard: Ebony | Frets: 22 | Pickups: 2x Full'Tron humbuckers | Controls: Bridge volume, neck volume, master volume, tone, 3-way selector switch | Hardware: Anchored Adjusto-Matic bridge, Gotoh locking tuners, Graph Tech TUSQ XL nut | Left-handed: | Finish: Cadillac Green
A full step down from standard. Used by bands such as Korn, Paradise Lost, Dream Theater (on "False Awakening Suite" and "Illumination Theory" from the self-titled album), Emmure, Obscura, ReVamp, and Fear Factory (on most songs from Obsolete and Digimortal, "Drones" and "Bonescraper" from Archetype, "Moment of Impact" from Transgression, and most songs on Mechanize, The Industrialist and Genexus)
Just knowing three chords will enable you to play all of these, albeit sometimes in a key that doesn't suit the song too well. As Rockin Cowboy illustrates, chords come in 'families', so if you understand that, songs become far more predictable. Sometimes I play with others, and when they try to explain that this new song 'has G, C and D in it', all I need to know is the key - in this case, G. The other two chords are virtually inevitable, but that fact seems to have escaped them!
A middle ground between solid and hollow-body guitars, semi-hollows are hollowed out but have a solid block of wood running through the center of their bodies. This achieves the increased sustain and reduced feedback of a solid-body guitar while retaining the mellow tones of hollow bodies. For this reason, semi-hollow guitars became exceedingly popular with blues players like Chuck Berry and Freddie King. Their duality — sweet and mellow but also some awesome, crunchy sounds — makes them great all-purpose guitars with classic sound.
Plate reverb and spring reverb were the first attempts to simulate reverb in a portable device. The plate and the spring, respectively, are made of metal and attached to a transducer. The signal is fed to the transducer, which causes the plate or spring to vibrate. Reverberations bounce around the plate or spring. A pickup at the other end, converts the spring or plate's vibrations back into an electrical signal.
“But I was recently talking to a guy at Yamaha who told me the total global revenue from musical equipment sales sold round the world doesn’t add up to one-thousandth of Apple’s AAPL, -1.42%   daily turnover. It’s a small specialist market,” Hook said. “Gibson guitars are expensive and they have been taken over by so many cheap copies. That’s what has caused a lot of harm to such a luxury product.”
Simple mistake that the beginners do is not selecting the right pickup on the right time. For example Normally they put the switch for the bridge pickup for soloing or do the powerchords. But then, to do some plucking, clean strumming or ryhthm, they still using the bridge pickup. So the sound is so dry, They should change it to toggle number 2(or for 5 way switch, toggle number 2 or 4)
Reverb is still the most commonly installed effect in amps, but there are some amplifiers that go overboard, to the point that they outdo even multi-effects units. Unfortunately, even those with the most number of effects allow for limited simultaneous use, so no, you can't put 10 virtual pedals together in your practice amp. Also don't expect the quality of built-in effects to match that of boutique pedals, but they can be a great addition to an amp if used sparingly and for appropriate songs.

Ibanez' strategy to have virtuoso guitarists as endorsers have paid off big time, allowing them to not only produce signature instruments, but to also improve on their production line guitars using the ideas they compiled from various artists. Among their many signature instruments, the Ibanez JEM series is easily one of the most easily identifiable, thanks to its affiliation with guitar wizard Steve Vai and its unique monkey grip handle, which is carved into the body.
I love this guitar! I am so happy with this axe and haven't put it down since it arrived. I don't think that you will find a better value in the Martin lineup, especially for an all solid wood guitar and a free HSC. People complain because this wasn't made in the USA, but I don't think that anyone would complain after playing this beauty. The action right out of the box was perfect, just like any high end Martin should be (plays like my HD28 and D18). This thing plays like butter and is silky smooth. Some people complain about the stratabond neck, but I love the feel of it and it is rock solid and should last forever! The finish and style of the guitar is very minimalistic, which is something that I love. It may be too plain for some people, but I love it. Something just
Another cool place I just found was Madison Guitar Repair out of Fridley. I went there a couple weeks ago. It's a little hole in the wall place where they just work on guitars and have tons of parts. Really nice guys that seem like they know their stuff pretty dang well. Never used them but considering that all they do is luthier work I'd give them a shot.
You can hear one all over Led Zeppelin’s debut record and all over Jeff Beck’s trademark “Heart Full of Soul” intro riff from the Yardbirds. He also used it extensively on the Jeff Beck Group sessions. Of course the most famous fuzz pedal is the Dallas Arbiter Fuzz Face. This pedal was favored by Jimi Hendrix and set the benchmark for fuzz tones that we are still chasing to this day.
At some point, possibly in 1967 – please forgive the fuzzy chronology, – Unicord was purchased by Gulf + Western, the big oil/hospitality conglomerate. This was part the corporate acquisition mania rage of the mid-’60s which included deals for Fender (CBS), Gretsch (Baldwin), Valco (Seeburg), Kay (Valco) and Gibson (Norlin). Either just before or just after the Gulf + Western purchase of Unicord, Unicord was merged with Merson. It was probably then Merson moved from New York City to Westbury.
Generally speaking, no. When it comes to guitar quality there are always exceptions, but for mass produced brands, the top models almost always come from America (generally more skilled craftsmanship: more attention to detail, less assembly line). The top Fender guitars, for example, are American made, and consequently significantly more expensive. That doesn't mean that they are inherently better than their Mexican made brothers, but that they tend to be crafted in a more quality controlled environment. That being said, the guitar is a very personal instrument, they change guitar to guitar for the same model. It's all about the connection between the guitar and the player: what feels right and what sounds best to them.
Here we ( SOLD ) are very proud to offer a USA built Martin Acoustic electric the model # JC-16RGTe.... More info soon to come and more pics as well... near mint condition like new! Everyone from Eric Clapton to Sting to Johnny Lang has played a Martin guitar, and professionals and amateurs alike know the bright sparkle and deep, resonant tone that Martin guitars have become famous for, from the most high end acoustics to the Backpacker. Carefully hand-selected tonewoods, master craftsmanship and beautiful finishes and styles make Martin acoustics a class all their own, and must be played to be believed. Martin sets the standard for acoustic guitars, and since 1833 has been a leader in guitar innovation and craftsmanship. The following info is from Martin. Martin JC16RGTE Features: * CONSTRUCTION: 1 Style; Ply Blocks; Mortise/Tenon Neck Joint * BODY SIZE: D-14 Fret CUTAWAY * TOP: Solid Sitka Spruce * ROSETTE: Bold Herringbone * TOP BRACING PATTERN: D1 Hybrid * TOP BRACES: 1 Style/Scalloped * BACK MATERIAL: Solid East Indian Rosewood * SIDE MATERIAL: Solid East Indian Rosewood * ENDPIECE: White Boltaron® * ENDPIECE INLAY: Black/White Boltaron® * BINDING: White Boltaron® * TOP INLAY STYLE: Multiple Black/White * NECK MATERIAL: Solid Spanish Cedar * NECK SHAPE: Modified Low Oval * NUT MATERIAL: White Corian® * HEADSTOCK: Solid/6 String No Diamond/Standard Taper * HEADPLATE: Solid East Indian Rosewood/ Raised Gold Foil Logo * HEELCAP: Solid East Indian Rosewood * FINGERBOARD MATERIAL: Black Micarta® * SCALE LENGTH: 25.4" * # OF FRETS CLEAR: 14 * # OF FRETS TOTAL: 20 * FINGERBOARD WIDTH AT NUT: 1 11/16" * FINGERBOARD WIDTH AT 12TH FRET: 2 1/8" * FINGERBOARD POSITION INLAYS: 28 Style * FINGERBOARD BINDING: White Boltaron® * FINISH BACK & SIDES: Semi Gloss/ Dark Filler * FINISH TOP: Polished Gloss * FINISH NECK: Semi Gloss/ Dark Mahogany Stain/ Dark Filler * BRIDGE MATERIAL: Black Micarta * BRIDGE STYLE: 1 Style Belly * BRIDGE STRING SPACING: 2 1/8" * SADDLE: 16" Radius/Compensated/White Micarta® * TUNING MACHINES: Chrome w/ Small Knobs * RECOMMENDED STRINGS: Martin MSP 4100 Light Phosphor Bronze * BRIDGE & END PINS: White w/ Black Dots * PICKGUARD: I-02 Tortoise Color * ELECTRONICS: Fishman® Prefix Premium Stereo Onboard Blender .
ESP is another huge brand in the realm of electric guitar, with huge bands like Metallica, The Rolling Stones, Deftones, Lamb of God, and Slayer endorsements in full swing. Any fan of this kind of acts will be very interested in starting with an ESP of their own. Like Fender and Gibson, ESP has a more affordable range known as LTD. This kit includes an electric blue H-51 guitar with 24 frets and dual humbuckers, as well as a 12 pick sampler set, gig bag, guitar stand, strap, 10-foot instrument cable, and a tuner.
The Guitar Chords: Easy-to-Use, Easy-to-Carry, One Chord on Every Page does one thing extremely well: it is spiral bound. It’s more of a reference than anything else, but one that musicians of all levels will appreciate. It covers the gamut of chords with not just one but two variations of each one. Of course, many have more than that, but it’s good information just the same.

One app I can recommend for playing these SoundFonts on smartphones or tablets is bs-16i from bismark.  Large SoundFount files like Nice-Keys-* listed at the top of this page have been tested and run perfectly on newer iPads with 3gb of Ram or more. For iPads with 2gb (Air2) it is best to limit the SoundFont size to around 600mb. For older devices try SoundFonts around 300mb.
Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.
So, if you’d like to emulate some of the guitar greats like Jimmy Page (Led Zeppelin) or Slash, this Epiphone package again with all the extras you’ll need—but with an Epiphone guitar—is a great way to start. Also, it’s worth mentioning that Gibson/Epiphone Les Paul designs usually have a slightly rounded, more narrow fret board and, in my opinion, are a little easier to play compared to the flatter, wider Fender fret boards. But I strongly recommend you don’t take my word for that. Get into a music shop and try the two types of guitar for yourself.
Taylors are okay as guitars go, but... I've owned three, sold them all in mint condition and lost considerable coin in doing so. I think they belong on this list because they charge hand made prices for MASS PRODUCED guitars. Don't believe me? Take the Taylor that you own and do a search for it on eBay. That's right, at this very moment there are hundreds of guitars just like yours for sale on eBay. And that's only checking this one sales venue! These guitars are worth half of what you paid because the market is saturated with them. Taylor cranks out hundreds of them per day and 100's of thousands per year. If you're shopping and seriously considering a Taylor, you can get comparable quality and far better value elsewhere. Choose carefully and you'll see your investment go up in value. Aside from some special, collectable models of Taylor, you will loose money on this brand.
Flanging can be a subtle effect, thickening the sound and imparting a spacey feeling. Or it can be extremely dramatic when cranked up, to the point of making the original signal unrecognizable. This broad range makes a flanger a fun stomp box to experiment with. Jimmy Page used a flanger to good effect on Led Zeppelin’s “Nobody’s Fault But Mine” and “Kashmir, ” as did Jimi Hendrix on “Bold as Love.”
Although most acoustic guitars have steel strings, classical and flamenco guitars use nylon strings. Nylon strings produce a mellower, softer sound. It is a common misconception that a new guitar player should start with nylon strings because they are easier on fingers or easier to play. Nylon strings and steel strings are not interchangeable on the same guitar, so it’s not a matter of progressing from one kind of string to another with experience. What should really drive your decision is what kind of music you want to play.
There are many options in this price range that will suit the beginning player. Musician’s Friend offers an extensive selection of Electric Guitar Value Packages that include an electric guitar, amplifier, and many of the accessories mentioned above. The components in these packages have been carefully chosen to work well together and can eliminate guesswork when choosing the right gear. Many also include instructional books, DVDs, and online beginner’s lessons, plus other resources to keep the new player motivated to keep learning.
Decca's flat-top acoustic guitars seem to usually sell for $50-75. They're not highly regarded because (a) acoustic guitars don't have the collecto-mania of electric guitars, except for certain brands (Martin, Gibson, etc.), and (b) the tonewoods Decca used were inferior to solid spruce as used by the aforementioned makers. Indeed, Decca often used plywood, which doesn't yield very good tone in an acoustic.
Gibson's factories were raided in 2009 and 2011 by agents of the United States Fish and Wildlife Service (FWS). In November 2009 authorities found illegally imported ebony wood from Madagascar.[37][38] A second raid was conducted in August 2011,[37] during which the FWS seized wood imports from India that had been mislabeled on the US Customs declaration.[39][40] Gibson Guitar Corp. filed a motion in January 2011 to recover seized materials and overturn the charges, which was denied by the court.[41][42]
The aim of Audio Issues is to help interested newcomers get started in the world of audio production with easy to use practical audio production tips for beginners and advanced. If you are just starting out doing some home recording or have been engineering for a while, these quick and easy audio tips are guaranteed to be of interest and use to you.
A 6 stringed right handed electric guitar that mostly comes in black color. It has its body made of bass wood and fret board made of rosewood with 22 frets. The dimension of the guitar is 9 x 9 x 3 cm  that is easy to handle. The model is quite affordable with prices ranging from around INR 9,071. Its beauty makes it have the required curb appeal for stage performances and give motivation in studio. More information can be found on the link that follows.
Guitarists and bassists who want to extend what their instruments are capable of have a huge arsenal of effects pedals and processors they can turn to. From subtle to outrageous, guitar and bass effects pedals and multiprocessors help you capture inspiring sounds off recordings as well as spark your own creativity. Keep reading to get the details on the many types of guitar and bass effects you’ll find at Musician’s Friend. We’ll also get up close with some completely unique stompboxes.

The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.


{"product":{"id":"K47863","stock":"","price":"399.99","name":"California Redondo Player Acoustic-Electric Guitar","download":false,"sku_id":"","checksum":"368856727023","rep_id":"site51500000000140752","displayId":"1500000000140752","sku_rep_id":"","gc_pro":false},"category":"Acoustic Guitars","pageName":"product_detail","subcategory":"6 String Acoustic Guitars","dept":"Guitars"}
Taming loud guitar playing isn’t the only reason to grab a mini amp, though. These also come in handy when traveling. Sure, you could bring along your acoustic guitar, but that will still make a fair amount of noise in your hotel room, and playing more quietly is less fun. With a mini amp, you can strum as hard as you want to and still control the volume. Many are also small enough to fit inside carry-ons without reducing the space you need for food, a travel pillow, and a good book.
Sorry This guitar has SOLD OUT! Here is a wonderfully crafted in Japan 000-18 type acoustic guitar by the great Takamine in the prime time of the lawsuit copys made with Pride in Japan long gone these have been discontinued decades ago over the copyrights to this Headstock design and also the logo looks identical to the Old 50s early 60s Martin from a few feet away looks exactly the same, that said this example is like owning a fairly new Vintage it has aged near 40 years yet is still near mint condition w/ nice OHSC.
Tailpieces are the end of the highway for guitar strings. Or maybe the beginning, since strings are first threaded through or over tailpieces, or pegged into them, before they are pulled along the fretboard for their big meeting with the tuning pegs. Essentially their function is to anchor the strings, which means most guitar tailpieces must be strong enough to withstand the combined tension of at least six strings without lifting off.
The book discusses both tabs and notation which makes it easier to transition if you’ve been using the former. It covers a wide range of topics including scales and arpeggios. The approach the author takes is logically and accessible with plenty of examples and exercises to make it stick. The only downside is that there are no songs included in it.
If you are familiar with - a special kind of - programming, you can use something like Pure Data or Max MSP. Pure Data (PD), for example, is an open source, visual programming environment for manipulating streams of data like audio (or video). With PD you are able to build your own individual FX chains or use community contributed patches (In PD speech "programs" are called patches). But I think it's not as trivial to use as out of the box products.
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.

While it may sound like a good idea to place a booster pedal towards the front of your chain in order to send that added voltage out from the get go, some pedals can’t handle high levels of voltage which can cause feedback and other problems. Also, you don’t want to simply place it at the end as there is not much benefit in adding voltage when the signal has already lost much of its clarity. It would be like enlarging an already fuzzy picture when what you really want is to keep it from getting fuzzy in the first place.
Lydia Lunch once beat her Teenage Jesus & the Jerks bandmates with coat hangers during practice; and her confrontational attitude was only matched by her completely unfettered guitar playing. Calling the instrument “a grand assaultive weapon,” she treated it as such, often attacking the strings with knives or even shards of glass, refusing to even bother learning chords, using it as a blunt force to express a total anti-pop, anti-punk, anti-everything rage.
guitar brands german guitar brands best korean guitars korean guitar factory korean guitar manufacturers korean guitar to ukulele manufacturers south korean guitars korean guitars acoustic all electric guitar brands good quality guitar brands acoustic bass guitar brands electric bass guitar brands quality acoustic guitar brands acoustic electric guitar brands good guitar brands More...
The company makes four models, the FS (fingerstyle), GC, D, and the Jumbo, each retailing at a flat price of $8,880 as of September 2011, making them amongst the most expensive new guitars in the world. The company also provides the option for customized furnishings such as exotic woods, buffalo horn nuts and saddles, mammoth ivory bridge pins and nuts, and specialized inlay and cutaway designs etc for an additional fee. The customized Petros guitars made of rare woods such as African Blackwood, Ceylon Satinwood or old flitch matched Brazilian Rosewood are sold for an extra $4,000 which with other furnishings such as ivory bridge pins can fetch over $13,000 in total.[2]

In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]


Description: Guitar Type: Acoustic/Electric - Body Size: AEG - Top Wood: Cedar - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Nut Width: 43mm - Fingerboard: Rosewood - Binding: Ivoroid - Frets: 21 - # of Strings: 6 - String Type: Bronze - Scale Length: 25.4" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Rosette: Abalone - Hardware: Chrome, Diecast Tuners - Pickups: Fishman Sonicore - EQ/Preamp: Ibanez AEQ-SP1 - String Instrument Finish: Low Gloss natural
Dimebag Darrell first discovered this guitar master while he was working in a club in Colleen, Texas. King was 17 and Darrell was 15. "They played and blew me away," King says. So he asked if the aspiring guitar legend needed help breaking down his guitar. It was the beginning of a working friendship that lasted until Dime's untimely death in 2004. Learning from another guitar master, Walt Treichler of Rotting Corpse, is what put this guy at the top of the extended family's list for repair answers. He also studied with Floyd Rose at a guitar show, learning everything there is to know about the Floyd Rose tremolo. "There's nothing better than the original thing Floyd came up with," he says. King is the kind of guitar doctor who makes house calls; but he's not accepting any new clients unless you're part of his extended family of musicians. "If I know 'em, and they need work on their guitar, I'll help 'em out."

As we mentioned before, the first mass-produced solid body electric guitar was introduced in the early ‘50s as a way for guitar players to avoid getting that unwanted feedback that amplified hollow body electric guitars were infamous for. Today, there are countless solid body guitars to accommodate any type of player and price range—from beginner guitar players to seasoned pros playing genres spanning hard rock, country, blues, heavy metal, jazz, and more! Some of the most popular solid body electric guitars include the Fender Telecaster, the Fender Stratocaster, the Gibson Les Paul, the Gibson SG, the Ibanez RG, and the ESP Eclipse.
×