Two of the strongest reasons to buy an acoustic guitar are user-friendliness and price. Some musical instruments are prohibitively expensive for beginners, and they’re difficult to learn, too. Not the acoustic guitar. Acoustic guitars are easy to learn, easy to carry, easy on the ears. And you can buy an acoustic guitar for an affordable price. The most difficult challenge in purchasing an acoustic guitar is finding the ideal fit for you. In this shopping guide, we will discuss some important elements to consider when browsing the acoustic guitar market.
BTW, Superstition is not played on synth but clavinet, a stringed keyboard instrument with magnetic pickups that are, in this song, actually used like two guitar single coils. — I quite agree with all your arguments, however I prefer HSS on a strat-like guitar as it doesn't have the too-muddy-neck-humbucker problem. On a Les Paul or Tele, a neck humbucker is much more useful of course. – leftaroundabout Jun 24 '14 at 23:28
His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.
Alas, the DT-250 was more of a punctuation point than a sign of the times. Or maybe it was a sign of the times. The Phil Collen model (minus his name after ’85) and the flametop DT-350 made it through 1987, but this DT-250 lasted only from ’84 to ’85. Unfortunately for this heavy metal monster, pointy guitars were already on the way out when it appeared, about to be eclipsed by the Superstrat craze that would dominate the rest of the ’80s. While these redboards do not really qualify for rarebird status, they’re not all that common. Over the course of their production, only 1,432 were built for worldwide distribution.
BOO TO AMAZON FOR CARRYING A MISREPRESENTED PRODUCT. Due to the description I thought we could use this for lessons. It is NOT an instrument it is a toy. It doesn't stay tuned for even a 1/2 hour lesson and the teacher won't allow him to use it for fear that it will hurt his ability to hear when a real guitar is out of tune in the future. I tried to return but they didn't respond for weeks and told me it was too late after they finally responded. The guitar has barely been used at all and won't be used since it is clearly doing more harm than good for a young musician! AMAZON you should drop this product, it is NOT what is presents itself to be!!!

Umm, no. Jimmy Page and Hendrix have both alluded to the fact that without Robert Johnson, they would never have existed. His albums were released before the 50's and 60's. To think that most of these guitarists (and by effect the people influenced those artists as well) didn't have their hands on Robert Johnson or Mississippi John Hurt albums which they learned from is preposterous. Please stop typing.
The MC5 were the nexus where radical politics and proto-punk belligerence first came together. This dangerous mixture touched off an explosion that’s still rocking the world today. The group burst out of Detroit in the cataclysmic year of 1969, with its roots firmly planted in mid-Sixties garage rock, and mutated by injections of inner-city R&B and free-jazz mayhem.
Bring up the topic of electrics, and Martin is hardly the first name of recall. The term “electrics” is not meant to include the company’s many fine acoustic-electric guitars, many sporting top-notch electronics (which ultimately remain acoustic beasts), but rather electric guitars meant for country chicken pickin’ or raunchy rock and roll. However, beginning in the early ’60s, Martin has launched periodic forays into the electric guitar marketplace with some very interesting, if commercially unsuccessful, results (which explains why the Martin name doesn’t come immediately to mind). Most coverage of the Martin brand is focused, quite rightly, on their substantial acoustic achievements. For this essay, however, let’s take an alternative view and look at the company’s various electric guitars, its thinline hollowbodies and later solidbodies.

Not everyone has the luxury of drum booths and separate rooms, but isolation boxes are great for isolating guitars during a rhythm track recording. They are also ideal for home recording, allowing a good  volume level without disturbing neighbours. Isolation boxes are commercially available, but can be expensive; try making your own from wood and foam.
For die-hard metal players looking for best electric guitar brands, Dean is another famous name you wish to check. The iconic ML design has become a signature instrument for rock because of Damageplan and Darrel Abbott of Pantera (late). In the ’90s, ML was revived by Dime, and then Dean stretched out the idea while sharpening the designs of it with a modern touch.
* The Chinese examples I have seen tend to weigh more. One Indonesian model I saw weighed a full pound and half less than the Chinese model right next to it. There is not, unfortunately, any way to tell from the box or from the barcode or SKU number on the box what factory a given example inisde the box came from. The system will deal out whatever is in stock at the moment.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
A favored brand of a number of against-the-grain musicians – like Jack White of The White Stripes, Dan Auerbach of The Black Keys, and the late great David Bowie – Eastwood is unique in that, alongside their catalog of more traditional guitars, they’ve also taken it upon themselves to bring back a number of more obscure models through the revived Airline brand. For instance, the ’59 Custom 2P pictured above was originally offered by VALCO in a catalog sale through Montgomery Ward from 1958 to 1968. Their vintage style instruments are updated with modern manufacturing techniques, giving players the opportunity to pick up rare offerings at a reasonable cost. But perhaps the coolest thing about this company is their custom shop. Set up almost like a Kickstarter, the shop allows customers to bid on defunct, new, and bizarre guitars and go on to build whichever models meet their funding requirements.
Best Answer:  First, make sure you have new or clean strings that aren't dead. You should hear a metallic harmonic overtone to picked notes particularly on the low E, A, and D wound strings. If your low E sounds in tune but makes a flat dull boww boww boww instead of dang dang dang when you pick change them. Set your amp up for a fairly bright sound clean, playing off the bridge pickup. Make sure the guitar volume knob(s) are rolled all the way on and tones are all the way up, no roll off. If you can't get a nice clear clean sound that doesn't sound distant and muted then you have some issue with the guitar electrics or amp. If you're playing off the neck pickup that's a big muddier right there. The neck pickup is good for clean rhythm playing, jazz, and for a hollow warm tubey sound on single notes but tends to muddy overdriven power chords. Once you have the amp set for a bright clean sound that's not too brassy (if it has a master volume in addition to a gain or channel volume set the gain or volume low for a clean sound and use master for output level, let the RP90 do the effects work, not the amp preamp for now.) bring in the RP90. I'm not familiar with it but try it on a few overdrive and distortion settings. If you've only been an acoustic player high overdrive or distortion "power steering" takes a different play style.

I have owned a Mesa Boogie Dual Rectifier for 5 years now and couldn't be happier! Granted, the amp took a long time to dial in my perfect tone, but it was a good way to familiarize yourself with the amp. If you want cleans, crunch, distortion, and a wall of gain that is big enough to destory small islands than this is the perfect amp. Not to mention, the customer service is out of this world! About a month after purchasing the amp Mesa Boogie called to make sure everything was okay and I was enjoying the amp. They also ask you to take a questionnaire on how the sales person performed. Great company, Best amps.


{ "thumbImageID": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "defaultDisplayName": "Squier Vintage Modified Jazz Bass '70s", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51373037988286", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Natural-1373037988286.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Vintage-Modified-Jazz-Bass-70s-Natural/H99641000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51373037988376", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Olympic-White-1373037988376.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Olympic-White/H99641000003000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Vintage-Modified-Jazz-Bass-70s-Olympic-White/H99641000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Candy Apple Red", "sku": "sku:site51373037988268", "price": "349.99", "regularPrice": "349.99", "msrpPrice": "549.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red-1373037988268.gc", "skuImageId": "Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red/H99641000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Vintage-Modified-Jazz-Bass-70s-Candy-Apple-Red/H99641000001000-00-60x60.jpg", "imgAlt": "" } ] }
Ovations reached the height of their popularity in the 1980s, where they were often seen during live performances by touring artists. Ovation guitars’ synthetic bowl-shaped back and early use (1971) of pre-amplifiers, onboard equalization and piezo pickups were particularly attractive to live acoustic musicians who constantly battled feedback problems from the high volumes needed in live venues.[citation needed]
Finding a good pickup for an acoustic guitar is a real personal choice that will depend on your budget, style, aspirations, and the actual guitar you own – that’s why we’ve written a focused article on the best acoustic pickups. Among the myriad of acoustic pickups on offer, you’ll find the quickest to install are transducer pickups, which attach to the face of your guitar – an affordable solution, although the sound quality isn’t as advanced as others. A step up is both undersaddle and soundhole pickups, which have their own pros and cons, while – at the higher-end – you’ll find internal microphones and hybrid mic/pickup systems, which offer a beautifully rich, natural tone. A great example of one of these hybrid systems is the LR Baggs Anthem Tru-Mic.
Taylor’s 214ce Grand Auditorium acoustic guitar has undergone a few changes over the years. One of the latest improvements added in 2017 concerns the wood used for the body. Because of the restrictions on the importation of rosewood, Taylor no longer uses it for their 200 series of guitars, which the 214ce is a part of. Instead, the company used the next best wood for a great, balanced tonal response: Hawaiian koa.
The traditional method of getting the sound of the guitar to an audience is to place a Shure SM57® in front of the speaker on the amp’s cabinet. While this certainly sounds awesome and is a tried-and-true method for most applications, the advent of personal monitoring systems like Shure’s PSM 900® led to guitarists being dissatisfied with the sound they were hearing in their in-ears. With the microphone method you are hearing the microphone, not necessarily the amp. This reality was the inspiration behind the creation of the Radial JDX 48™.
Stay tuned for the second part of our series/parallel discussion next month. We’ll pick up the soldering iron and explore some sweet parallel/ series switching options for our Strats. This will also close out our run of Stratocaster mod columns. When we finish the series/parallel discussion, we’ll switch over to Telecaster and Esquire mods. Until next time, keep on modding!
For those of you out there with a stereo or home theater system, you'll be fine as long as you run the audio directly from the xbox through that. But since I have neither, I was stuck. I ended up bringing down my old CD player from my bathroom, just to see if that would work. SO much better. But since I didn't want to leave that ugly thing sitting under my TV in my living room I went out and checked around for speaker prices. After the money spent on the game and the guitar, I didn't really want to put too much more money into this. I ended up with a Turtle Island headset for $40. It seems to be doing the trick. Just be prepared for this extra expenditure if you don't have an external speaker system in place.
All this is to say that you don't need to worry about getting your hands on a large amp. Small amps perform better for the overall sound of your band in most venues, and any venue big enough for you to need more volume is going to mic your amp anyway, giving you all the juice you'd need. So, as you look at the amps on our list, you can evaluate them based on their EQ options, their effects, and, frankly, their look.

Orville Gibson founded the company in Michigan and stayed a family business until the early 50's. Ted Mcarty ran the company from 1951 or so, and is the "father" of most successful Gibson electric guitars, the Les Paul, the SG, Explorer, Flying V, ES-335 and so on.. In the late 60's Gibson was bought by the Norlin Corp, who mainly were known for making refrigerators. Most feel Gibson adopted a quanity over quality approach to guitar making during this period and 1970's to 1980's Gibson electrics are considered less desireable by most guitar collectors, and considered outright junk by many others.. Cosmetic changes to Gibson models during that period apparently reflect the poor taste of the buying public during that era... and while a 1974 Gibson SG may look ugly compared to the classic 1961 or 1968 models, please remember this was the era of ployester liesure suits and Chrysler Cordobas.. In 1986 Gibson was bought by a group who understood guitar making, and is a privately held company to this day. Gibson quality has appeared to improve steadily from 1987 to present day, but it seems to be unanimous that todays models do not approach the craftsmanship of the late 1950's when Gibson apparently peaked.


SHEILDING Sheilding is good to use if you want to minimize that annoying buzz you can get from surrounding interference that electronic components such as amps can produce. You can use sheilding paint that is a bit more expensive but easier to apply than copper tape. All you do is paint it on and let it dry. It also gets into the areas tape can't reach. To install the tape you basically just apply it to the inside of the control cavity and solder up any seams that might let the interference through. The soldering can be a little tricky since you have to lay down a long bead of it along the seam. Kind of like welding. Here are some futher instructions After this is done you can install the pots and switch. Be careful when tightening them down not to scratch the finish. Add the knobs and get out your schematic for wiring it up.
The phaser is an interesting pedal that has a surprising mix of uses across genres. What a phaser does is add an out of phase version of your signal with your original signal. This gives your sound a swirling effect that has many sonic possibilities. Eddie Van Halen famously used a phaser set a a low rate to add some “movement” to his solos. In funk, phasers are fundamental in creating the bright and terse rhythm sounds.

You are bidding on a previously owned and in good working condition Blackstar Amplification HT Studio 20H guitar amp head. This auction is for the amp and power cable you see pictured. No footswitch is included. Nothing else is included. It comes as pictured. Please take a moment to look at the pictures and get a better idea of what you are bidding on. This unit has some scuffs and dings from being moved around. It has been tested and is in good working condition.

If you want to splurge just a bit more and opt for an instrument with a little more stylistic range, the Ibanez Talman guitar vault accessory kit might be right up your alley. It includes a lovely seafoam green Ibanez TM302SFG, 12 high-quality Dunlop Tortex picks, a strap, a gig bag, a Kyser capo, a polishing cloth, and a tuner. This is off the beaten path a bit, but for some players, that’s going to be absolutely perfect.
This string overview is useful for understanding what choice to make that suits your play style the best.  As players, we are always searching for the highest possible functionality, while balancing tone and playability for the genre we play.  Check out what brand and gauge your guitar heroes use to help you zero in on your perfect string set and keep on rocking!

Editorial comment – I advise folks when considering fretwork to consider not choosing a size or leveling operation resulting in less than .040” height if they want to play a style with frequent fret hand slurring, i.e. rock, blues, shred etc.  Low fret height is less capable of sustaining a reasonable fret leveling in the future, making it that much closer to refret time.  You don’t have to choose a very tall size if that is uncomfortable for you, but only choose a low height if that is really what you want and are accustomed to.
The Duo-Sonic is a short-scale student model that has become highly prized for its excellent playability and tone, making it one of the best electric guitars for beginner guitarists with cash to spare. This updated model - with its slab alder body, flawless in sparkly Surf Green - features the classic offset Fender waist that gives the series its name. The three-ply white/black/white scratchplate also plays host to a chrome-tipped three-position pickup selector switch and knurled (aka easy-grip) volume and tone knobs servicing two pickups, a neck single coil plus a bridge humbucker. The latter is also coil-splittable via the push/pull tone knob. We've encountered guitars at more than twice the price that don't play anywhere near as well as this thing does. Oh, and it doesn't matter what size your hands are. If we had to use a song to describe the tonal range of the bridge pickup, we'll have Smells Like Teen Spirit, please. A clean setting here echoes the clattering rhythm voice of the song's intro while a fuzz box unleashes a racket not unlike the heavy sound Kurt craved. If it sounds like we're typecasting this guitar then rest assured the Duo-Sonic is versatile enough to handle country picking, surf, indie, classic rock, whatever. Plus, the neck pickup warms things up perfectly for clean or dirty blues lead or jazz chords.
[Attention Korg Pa3x /Pa4x owners and Korg Pa700/1000 owners- I have a special version of this 6-velocity layer piano in .set format that will load to your Korg in compressed format at 116mb (equivalent to 232mb) - This set sounds wonderful on the Korg and uses 22 oscillators for outstanding realism including resonance, key-off and pedal effects. Send me an email (see bottom right) and I can provide a download link or go to the demo on SoundCloud here Korg Pa Yamaha C5 and follow the download link]
I have my El Maya EM 1300 ( El Maya Japan, Kobe instruments) since 1989 but it was built during the end of 1982 and EL Maya Strat version, guitars are neck trough body, amazing instruments they are better then any guitars i ever played maybe I'm not objective , only my US Hamer is close or on that level. Does Anybody have any El Maya? and that you maybe wish to sell it? More over what are the fer prices for the almost mint state of those guitars, regards miki.
There aren’t really any structured lessons—like, where you’re starting at the beginning and working your way sequentially through—you have to browse through the playlists and find what’s best, but the quality of the lessons and wide variety of topics will have everything covered. JamPlay is a sampler for the website, where you’re offered a subscription service to complete courses, which explains the kind of shotgun approach to the videos made available on YouTube. But the size and breadth of the topics you can access for free still makes it a great channel.
Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.

Hughes & Kettner is another new comer that's making really good progress in the market, thanks to the surge in popularity of their TubeMeister line of low-wattage tube amps. For a company that just started in the mid '80s, this is an incredible feat, and it seems like they are not letting up because they continue to get good market feedback from users and experts alike. This is mostly due to their commitment to building quality tube driven musical equipment, the same commitment which inspires their latest guitar amp models. Nuno Bettencourt, Alex Lifeson, Tony Macalpine, Allan Holdsworth are just a small sample of big name guitarists who help further expand the company's reach.
Sure, the Teach Yourself to Play Guitar: A Quick and Easy Introduction for Beginners book is for those brand new to the hobby. But experienced players will love the chord chart that comes with it. It includes the basic major and minor ones along with the more uncommon ones for a great reference. Some of the riffs are a bit obscure, but it doesn’t detract much from its value.
Great post a lot of useful information here I found this old acoustic guitar made by lotus I have never heard of this brand and have been trying to research it for about a month now and haven't gotten any closer to finding out the history of it if anyone know anything about them I'm all ears it has a tag on the inside model no. LW 65 or g5 lotus made in japan thanks in advance for any information I can get
I've had a Sunburst pattern Ventura when I was a teenager.. it was a nice guitar and played well. recently i saw a really well made Oscar Schmidt gs-1 . not expensive at all. My main guitar for many years was a Gibson howard roberts "artist" dove style. wine red and mother of pearl inlay and gold plated. I eventually sold it to a lady in alaska that plays a lot of blue grass and pop. I got full money out of it. I had it 25 years, so it was vintage by now.

This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable. http://www.indianaguitar.com/products/Scout-acoustic-electric-967.html#.VZNeJ1L3bCQ
This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.

In about 1975, Ernie Briefel and Merson parted company with Unicord/Gulf + Western, becoming Music Technology Incorporated (MTI), on Long Island, taking the Giannini brand with it. Later, in the early ’80s, MTI would import Westone guitars made by the great Matsumoku company, which it would sell until St. Louis Music began its partnership with Matsumoku and, in 1984, transitioned its Electra brand to Electra-Westone and then ultimately Westone, which lasted until 1990, when SLM’s guitars all became Alvarez.

If your audio track suffers from a lot of spill, or includes chords, the pitch correction may not work correctly. Where spill is loud enough to be audible, you'll hear this being modulated in pitch alongside the wanted part of the audio as it is corrected. As a rule, chords are ignored, so guitar solos, bowed stringed instruments and bass parts (including fretless) can be processed, and only single notes will be corrected.
Most players dream of having comfortable, smooth action on a guitar. With the PLEK, the most optimal string action possible for any instrument can be realized. This gives the individual musician an instrument that plays exactly the way he has dreamed of. Optimal playability on a guitar makes it sounds better with notes that ring true and clean. There is no fret buzz under normal playing conditions and the intonation problems that occur because of high string action, are eliminated. You can hear and feel the difference.
If you prefer the Linux platform, then Guitarix is your best free guitar effects solution. It is a free, full featured guitar amp and effects software. Aside from its impressive amp modeling capabilities, Guitarix has 25 equally impressive effects modules. Effects include a noise gate, modulation effects like flanger and phaser and it even has weird stuff like auto-wah. Guitarix's low latency audio engine ensures respectable audio, which is said to give you not more than 10 milli seconds of delay. This is a simple yet effective guitar effects software, unfortunately it is only available for Linux users.
The focus has always been to start with sound and top it off with a bold, boutique-inspired appearance. When Michael Kelly launched, we, in fact, only offered mandolins and acoustic basses. These two markets had been under served and consumers could not buy a great sounding instrument without breaking the bank. The Michael Kelly Dragonfly collection of both acoustic basses and mandolins quickly became popular and hard to get. Musicians were drawn to their decidedly custom appearance and then fell in love with their sound and performance.
Potentiometers (Pots) for audio are used to adjust tone and volume. Pots are resistors with three terminals and a sliding contact (the wiper) that creates an adjustable voltage divider. If only two terminals are used (one side and the wiper), it acts as a variable resistor or rheostat. Potentiometers are most commonly used as control devices, such as volume control on audio equipment. A potentiometer for Audio applications would feature very low to no introduced noise.
{ "thumbImageID": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "defaultDisplayName": "Warwick German Pro Series Corvette $$ 5-String Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Satin", "sku": "sku:site51500000138039", "price": "2,069.99", "regularPrice": "2,069.99", "msrpPrice": "2,699.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin-1500000138039.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin/K36090000002000", "brandName": "Warwick", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Natural-Satin/K36090000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Burgundy Red", "sku": "sku:site51500000072276", "price": "2,199.99", "regularPrice": "2,199.99", "msrpPrice": "2,849.99", "priceVisibility": "1", "skuUrl": "/Warwick/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red-1500000072276.gc", "skuImageId": "German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000", "brandName": "Warwick", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/German-Pro-Series-Corvette-5-String-Electric-Bass-Guitar-Burgundy-Red/K36090000001000-00-60x60.jpg", "imgAlt": "" } ] }
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!

I agree that you should spend more on the guitar than the amp, but if you have a nice guitar and a cheap amp, you aren't giving the guitar enough width and breadth of tone capabilities to warrant spending $1500 or more on a guitar. So, if you're going to spend over $1200 on a guitar, don't buy a lousy amp. A Peavy 30 is a decent amp, but is short on breadth of tone as compared to a Fender Deluxe Reverb 22 watt. Marrying the guitar and amp is an important part of the process, they are symbiotic. My advice, as a player for over 40 years is to buy as good a guitar as you can. For beginners, a bad guitar will not get you playing, in fact, the most common reason young novices stop taking lessons is that the cheap junker they got is unplayable, even by professionals. It's hard, not fun, seems like a world of work and they quit. That's not how it's supposed to be. It's a fun thing, so get out there, get a good playable instrument and you are on your way to a lifetime of good times.


Play with it, see what happens. Worst case; you’ll set it, forget it or use it as a means to dial out some hum. Best case, you’ll find the guitar in your hands is far more versatile than advertised and use the tone knob to wield it like a musical samurai and leave everyone wondering…”how the hell do they get so many sounds without a guitar change?!”
While fan-braced modern classical Torres and post-Torres style instruments coexisted with traditional ladder-braced guitars at the beginning of the 20th century, the traditional forms eventually fell away. Some attribute this to the popularity of Segovia, considering him "the catalyst for change toward the Spanish design and the so-called 'modern' school in the 1920s and beyond."[5] The styles of music performed on ladder-braced guitars were becoming more and more unfashionable; and, e.g. in Germany, musicians were in part turning towards folk music (Schrammel-music and the Contraguitar), but this only remained localized in Germany and Austria and became unfashionable again. On the other hand, Segovia was playing in concerts around the world, popularizing his modern classical guitar, as well as a new style of music in the 1920s: Spanish romantic-modern style with guitar works by Moreno Torroba, de Falla, etc. Some people consider it to have been this influence of Segovia which led to the domination of the Torres instrument. Factories all over the world began producing them in large numbers.
On these guitar tracks, I did use a little bit of the 1176. I don’t overcompress on these tracks, I just basically want to get a little bit more sustain out of the notes, so I have it setup so that there’s plenty of attack that comes through. I’m not trying to control that so much as I am the sustain of the note, and get a little bit more length out of it, though I’m pretty gentle with that. Then it just goes into Pro Tools and I record it as is.
This beast features a classic Sitka spruce top with a rosewood back and sides combo. We have already mentioned a few guitars that feature these types of tonewood. However, the difference here is that the Martin DCPA4R is a handmade instrument that brings you the craftsmanship of Martin's top luthiers. If you appreciate craftsmanship, you'll love this instrument.

The guitar offers a carved mahogany top with a set neck and a slim-tapered profile (a shape normally reserved for more premium guitars). The rosewood fingerboard sports premium trapezoid inlays for a really pro look. The Alnico classic humbuckers are true, high-output gems that, paired with the set neck, will offer a rich, long sustain. There are two tone knobs and two volume knobs, as well as a three-way selector switch for all of those classic Les Paul sounds. The stop bar tailpiece and the LockTone Tune-O-Matic bridge give you rock-solid tuning stability, so you won’t have more frustrating retunes than you absolutely need.

This processor is pretty good quality, unfortunately not too many parameters on the effects and you can only use one effect at a time, and some prefixed combo of 2 effects (if i remember correctly 10 different options). If you need it for reverb, or slight delay, tremolo or acoustic simulator its pretty cool, not able to add exact tempo on delay or tremolo though. Sound quality is very good, 24 bit A/D and D/A so no loss there either, and you also have stereo (same effect options on both though) and balanced and unbalanced outputs (if you use unbalanced the signal goes to both outputs so you also have the balanced output if needed). For the money is definitely the best option, imagine that a reverb pedal cost the same money (just reverb)...so if you have a controller it will fit on your gear. I am using it with ... full review
When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.
The reason being that guitar manufacturers will usually look to keep costs down in the pickup department. This is particularly true for budget models, which will usually be fitted with stock pickups that do the job, but fall short of truly impressing. So guitarists with an affordable, but playable guitar may wish to upgrade their pickups, to make their favorite axe gig-worthy.
When I was a kid in the 60s, all of the Japanese brands (probably ALL made by Teisco) had a really bad rap and only kids ended up with them. Some were very cheaply made, with weak metal, thin chrome plating, funky finishes and thin pickups. I owned a Rodeo, which was terrible. But then, who knew much about guitars then? Nowdays, anything has character.
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.
Then, in the late ‘60s, two things happened. First, Unicord was purchased by conglomerate Gulf+Western around 1967. Then, Unicord was merged with a company called Merson, which housed brands like Tempo, Giannini and Hagstrom. It’s not certain what the exact timeline of these events were, but once the merger occurred, Univox up and moved its production from New York City to Westbury, NY. However, that didn’t stay static for long.
So, I’m 50+, I’ve never played a guitar, and I’m trying to decide on an electric guitar. I’m less concerned with the brand name, more concerned with high quality and workmanship, and last, I like the tone of the guitars played by the late Pete Ham of Badfinger (especially Baby Blue), and Joe Walsh. I know Ham played a cherry red Gibson SG standard, but I’m seeing quite a few mixed reviews on the quality control and workmanship of the current SGs. I listen to a lot of jam band music (i.e. Widespread Panic) and enjoy the rhythm guitar best. So, where to start and stay under $2000 to get a guitar that will produce the type of sound I’m looking for?
Finally, their taper. Taper refers to the gradual increase or decrease of the pots ohm as you adjust it. There are two types of pot taper, Logarithmic (Audio) and Linear (Lin). The human ear hears in a logarithmic manner, so in a gradual increase or decrease, whereas linear, to our ear sounds almost more like an on/off. Which you use is completely up to you, many players prefer a linear volume pot for example, but I find that a quality logarithmic pot in both volume and tone positions offers more scope for adjustment, if using a quality pot that is! Low quality audio taper pots, in my experience, offer unreliable tapers, often not providing a even, gradual adjustment as you roll off or on. A guitar's volume and tone pot can bring out so many great sounds from your rig, it offers versatility to your sound, and I love pushing an amp hard and finding those sweet spots on the guitar's controls to really capture a great tone. So I feel that's why a quality logarithmic pot with a perfectly gradual taper is an incredibly important component in the electric guitar. 

While most beginner electric guitarists focus on the actual guitar when purchasing equipment, the amp actually plays a far larger role in the overall sound. The best made guitar in the world is not going to sound good through a cheap, poor quality amp. However, any decently made guitar can sound quite good when played through a good amp. So, a guitar amp should not be an afterthought purchase for a beginner.
I am struggling with the same issues trying to wrap my head around the benifits of constructing my neck through in this fashion . It would appear most of the big dog builders subscribe to this theory though I don't really know why. I read in a post in this forum that it started with a mistake by luthier Carl Thompson when he cut the channel too deep for the neck and was later copied by Ken Smith ,and then Fodera.
How a guitar feels is highly subjective – after all, even guitarists come in all shapes and sizes. While the acoustics in our list are all made in such a way that most guitarists will find them comfortable and easy to play, there’s still no beating being able to try several models out so you can choose which one feels like it’s a part of your body.
The other US-based manufacturers were from Chicago Harmony (formerly owned by Sears), National-Dobro (Supro/Valco) and Kay. Chicago was the largest guitar manufacturing area of the US at the time. The only other manufacturer of Silvertones during this period was the Japanese-based company, Teisco (or Teisco Del Ray as it was formerly called). Teisco created some of the wildest designs for Silvertones, in our opinion. The earliest model was the TG1. This was the first guitar to incorporate an amplifier and speaker into the body of the guitar. Although some people look down on the Japanese guitars we think they've got some really interesting sounds and innovations not found on American made guitars.

Hi Jeff. I just wanted to point a couple of things that IMHO are not 100% accurate. Most probably its just to make things not too complicated, but I think is important to notice them. First, resistance is not frecuency dependant, and therefore it doesn´t have any effect on high frecuency content. However, Impedance does, and impedance is the resistance on the AC world (and a guitar signal is an AC signal). Therefore, the reason both long cables and pickups loose high frecuencies as they get longer is because the capacitance in them increases, and capacitors have a certain impedance (once again, resistance in the AC world). So you may actually be true, but its because of impedance created by the capacitance and inductance present on the pickup. Will continue..
The ultimate rock/metal electric guitar instrument is here! Shreddage II covers the entire range of lead AND rhythm playing – every fret, every string, and tons of articulations. A powerful interface allows for easy playing and deep customization. With the included Kontakt Player and ReValver HPse, you’ll have everything you need to SHRED. Now includes Shreddage 2X update!
Nut slots too deep: Take a course file and file the top of the nut 1/2 the distance you want to raise the slots. Catch the filings on a piece of paper. Tape both sides of the nut with masking tape and then fill the slots with the filings. Soak the filings with thin superglue. Press into place with a toothpick. When dry, refile the slots. The slots should be made so the string sits in about 1/2 to 3/4 thier diameter. Slots should be wider, and taper downwards on tuner side. Square slots are acceptable.
These guitars use very cheap materials. I bought a washburn WM24v PROE for $300 and it come with Mahogany body & neck, phenolic fretboard, emg81/85 and original floyd rose... Ibanez RG costs $400 and comes with basswood body, bolt on maple neck, rosewood fingerboard, shoddy pickups and a licensed floyd that WILL NOT stay in tune. Poor quality for money, if you get a Ibanez go for a fixed bridge/string-thru because their trems are HORRIBLE! Original floyd is the only way to go!
Since there is little difference outside of the individual guitars featured in this series, I will nitpick a bit and say that RealLPC has the worst GUI of the four.  Where there was never any difficult-to-read text on RealStrat, there is some here, and the weird navy green parameter boxes along with a black Les Paul with gold trim doesn’t sit well for me.  
The process for recording sound from a guitar amp might seem simple; you have your amp and a mic to capture it, stick mic in front of amp, press “record,” and play. Done! The truth is, though, that even when using the same guitar and amp with the same settings captured by the same mic, the results can vary greatly depending on where you place that mic. Add the variables of different mics and multiple mic placements on one speaker cab, and your sonic possibilities expand exponentially. The elephant lumbering into the room at this point in the game is the fact that more and more people are recording direct to interface using digital amp simulators, or DI’ing and applying an amp plug-in in the digital-audio workstation (DAW). These facilities have improved tremendously in recent years, but the majority of professional guitarists and professional studios still mic actual amps to record the most dynamic guitar-based music being made today, so we’ll stick with honing these old-school skills.
Being one of the reputed organizations, operating in this domain, we are engaged in manufacturing and supplying a quality range of Gigmaker Electric Guitar. We only use high grade components and latest technology while designing these guitars. The offered range is widely appreciated all over the nation for its salient attributes. With our quality range, we
Just start out small, when i first started playing guitar I wanted to learn every metallica song there is, and sure enough I did, it took me about 5 years to get there and a bunch of different gauges eventually with time you start to develop the feel for what gauge satisfies you the best. Now I mostly use hybrids ranging from 10-13's, but just like everyone I started out with softest strings that are out there in existence but I used to break them alot so there were many beers out there that I didn't get to drink because the will to play guitar was stronger hahaha. But in the end it was worth it cause now I get to have all the fun on the guitar, and all the chicks are digging it hahaha, no they're not. And one more thing never obey the rules it's just something that stuck up guitarist make up because they don't want to be outdone find out what pleases you the most and keep on doin that.
The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named “Killer,” “No Remorse,” and “Murder One".[5] The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.[6]
Consider how many transformations take place during the production of sound from an electric guitar. The guitarist picks a string with a plastic plectrum, which produces vibrations that are picked up by coiled magnets directly positioned behind the strings, inducing an alternating current (hence the name “pick-ups”). The current’s signal is then transmitted through a wire lead, after which it’s amplified by either a vacuum tube or solid-state amplifier, and then reshaped into audible sound by a loudspeaker. Depending on the sound that a guitarist is seeking, he or she may place guitar effect pedals, or stompboxes, in between the pick-ups and the amplifiers. These small, intermediary devices further manipulate the guitar signal to produce a multitude of effects.
hey paul. i have a dorado 6 string acoustic. they really are beautiful guitars (for the price and value). if you email me (swiver84@hotmail.com) i will send you pictures of it. i'd like to see some of your dorado as well, i've only seen a couple others on ebay. i lost one on ebay yesterday by 1$! i am still kickin myself in the butt for that one. it went for 36$.
Guitar techs specialize in stringed instrument technology, providing support for all issues relating to electric and acoustic guitars. They might work in music shops repairing, tuning and finishing guitars for customers. Techs may also be hired by bands to maintain and prepare instruments before, during and after shows, including the set-up, stringing and tuning of guitars, bass guitars, pedals, cables and amplifiers. Additional responsibilities include instrument shipment between shows and maintenance during recording sessions. Securing employment with a band may be a competitive endeavor, and travel is often required for those positions.

Recently I was in the market for a low watt 1x12 amp. My local music store had a good selection. I grouped an old Vox AC15, Fender Deluxe, Orange, and a PV around me. I used a PRS Custom 22 to try them out. After about an hour I decided on the Fender. The sales guy suggested I try one more amp. It was an Egater Rebel 20 head with an Egnater 1x12 cab. My reaction was instant! If you have not played one of these you owe it to yourself to check them out! I bought it and also a Rebel 30 1x12 Combo a few weeks later! They SING!
The people at VOX know a thing or two about creating great sounding amps, after all the AC30 is probably one of the most famous amps of all time. The VOX Valvetronix VT40X modelling guitar amp actually recreates the sound of these great amplifiers and so many more. In fact, you have 11 famous amps to choose from which can expand to 20 when using the included Tone Room Editor as well as 13 effects built in. The hybrid digital/analog power amp provides you with all the warmth of a tube amp but with digital stability! If you want more power, you have the VOX VT100x or the smaller version – the VOX VT20X.

For example, if the note E (the open sixth string) is played over the A minor chord, then the chord would be [0 0 2 2 1 0]. This has the note E as its lowest tone instead of A. It is often written as Am/E, where the letter following the slash indicates the new bass note. However, in popular music it is usual to play inverted chords on the guitar when they are not part of the harmony, since the bass guitar can play the root pitch.

What you need is some basic knowledge about the physics of audio (most of which you can learn by dropping a pebble in a puddle of water), and some pretty basic and inexpensive equipment. This is especially true for recording the electric guitar. Trust me--if it were brain surgery, I would have become a brain surgeon and made my mother a much happier woman. And while I have the opportunity . . . for all you kids who want to grow up to be recording engineers--don't do it. Become brain surgeons. They make a lot more money, drive nicer cars, and never have to worry about where their next gig is coming from.
i bought one in 1966, my first guitar, i paid 38.99 for it at a gibson dept. store in ft. worth, tx. it was mij under the same name and was marketed in canada as regent guitars and in the u.s. later as kent guitars. it is in the same catagory (some say better) as teisco its competator, some say there was some interfacing between the 2 companies. i really enjoyed it and wish i still had it, it played great and sounded great. i found this while surfing 4 another!!!
There are just a few minor differences. For example it has a bolt-on mahogany neck instead of a set neck, and the fretboard is made of rosewood rather than expensive ebony. We don’t really care about that, since rosewood actually is really good for fretboard since it’s naturally oily. You don’t want a super dry fretboard. It’s good for the sound too, since it captures some extra overtones that make your tone fuller, nothing goes to waste!

A reluctant soloist, Yo La Tengo cofounder Ira Kaplan was credited with “naïve guitar” on the band’s first single in 1985 and didn’t begin taking the spotlight regularly until some two years later. Starting with a bucket of Velvet Underground moves, Kaplan became a consummate inside guitarist, too, a deceptively normal-looking dude folding in space jazz, barbed noise, spare country soul, and — when very occasionally called for — traditional feet-behind-knees rock jumps.

When recording an electric guitar, the amp is the instrument as far as the mic is concerned, and mic position is important. While a lot of sound comes direct from the speakers as you'd expect, a significant level is also emitted from the back and sides of the box via panel vibrations. Also, an open-backed cabinet throws about as much sound out of the back of the box as it does out of the front. Choosing a mic for recording electric guitar isn't difficult, as virtually any decent mic of any type can be made to produce usable results. If I were to generalise, I'd say that British recording engineers tend to use cardioid, dynamic models while American engineers seem to prefer capacitor microphones. The dynamic mic produces a solid sound with a smooth high end, while the capacitor mic's increased definition produces a brighter, more open sound when used in the same way. However, the mic position has just as much bearing on the tone as the mic itself.


Kadence guitar has soothing sound quality with a bright tone, which indicates you have to go for higher gauge strings if you need bass-heavy sound output. This guitar is manufactured in our home nation – yes in India! was established in -2006. They produce an acoustic range of guitars that are available at a starting price of 5000 INR. approximately. Guitars in this brand that have a superior quality of sound start from 10,000 INR.
The arched top Strats all had maple necks, rosewood ‘boards, black hardware, Floyd Rose licensed locking vibrato systems, and slight finish variations. The SSL-1 had a single humbucker with a volume control that had a push-pull coil tap. This could be had in metallic black, purple burst, white pearl, red pearl, and pink fire. The neck on the early SSL-1 is described in different sources as having a stain finish or as having an oil finish; there’s probably a clue to dating sequence here, but I don’t know the answer.
The Japanese copy juggernaut got off to a fast start, and the second major Univox guitar was the Lucy, a lucite copy of the Ampeg Dan Armstrong, again produced by Arai, introduced in 1970. This guitar had a surprisingly thin bolt-on neck (especially compared to the Ampeg original) and a slightly smaller body. The fingerboard was rosewood with 24 frets and dot inlays. This had a fake rosewood masonite pickguard with volume, tone and three-way select. Like the Ampeg, the Lucy had a Danelectro-style bridge/tailpiece with little rosewood saddle. Unlike the Ampeg – which had Armstrong’s groovy slide-in epoxy-potted pickups – this version had a pair of the chrome/black insert pickups jammed together at the bridge. Other Japanese manufacturers also made copies of the Ampeg lucite guitar, notably carrying the Electra (St. Louis Music) and Ibanez (Elger/Hoshino) brand names, with versions of the slide-in pickups. In ’71, the Univox Lucy (UHS-1) was $275 including case. Just how long the Lucy remained available is unknown, but it probably did not outlive the original and was gone by ’73 or ’74.

A Reamp® box is essentially the reverse of a DI box and converts a balanced signal into an unbalanced signal suitable for driving guitar amps. Radial makes three different versions of this device with variations in features and in quality of the transformers. For an introduction to reamping there is the passive ProRMP™, for high quality reamping there is the Reamp JCR™, and at the top of the line is the dual-channel active X-Amp™.

One of  the most widely used guitars in jazz, the ES-175 is a semi-acoustic, hollow-bodied archtop that comes equipped with two humbucking pickups. The ES-175’s deep body produces the thick, dark sound beloved of jazz guitarists and the thin neck allows for fast chording and soloing. The bridge pickup is capable of producing a less jazzy, thinner sound, and ES-175s can be used in blues and rock.


For our example pedal board, we’ll pick the ST-2 Power Stack. Another category with many choices is modulation.These are effects like flanger, phaser, chorus, tremolo, and others. Let’s use the most versatile of these—the BF-3 Flanger. Another group is ambience effects, such as delays and reverbs. We’ll use one of each: a DD-7 Digital Delay and the FRV-1 ’63 Fender Reverb. There are some pedal effects that can add notes or alter the pitch of what you’re playing. For want of a more esoteric name, we’ll call these “pitch-altering” pedals. From this category, let’s throw in a BOSS OC-3 Octave.
Looking for Used Gear? You may have just discovered your future. Music Go Round franchisees started out as customers of our stores. They have a love of music, they love gear and they understand the industry. Most importantly they’ve taken their passion and turned it into a business they’re proud of which is an asset to the music scene in their community. Who wouldn’t want to own a business where every day they were doing what they truly love? Sound interesting?
Typically do not use any effects, but have an EQ, Sustain, and Room echo sim in my effects chain with Ampkit on my iPad that I use pretty much 100% of the time, but my goal is clean ,clean, clean. I'm still just a beginner so I am holding off do effects until I at least learn how to play. I play more Jazz then anything else. I even play metal clean so I can hear my technique.

When Schecter was first founded in 1976, the company’s original purpose was to produce replacement parts for other guitar manufacturers. In 1979, they produced their first guitar and it all took off from there. Today, Schecter is one of the highest rated guitar brands. If you’re looking for a guitar to play metal in particular, Schecter could be the brand for you. Schecter is well-known for their brutal heavy metal sounds. They have a decent range of models, including basses. Schecter’s arguably most famous guitars are the Hellraiser series. They are usually closer to $1000, but it could be worth it for you. When played correctly, the heavy metal distortions and gains that blast out of the amp is fantastic and if you’re a bit more gentle you can even get some softer sounds out of it. The same can be said with most Schecter models, but they favour heavy metal, so if you’re not looking to play heavy metal, you might want to look elsewhere.
Description: Guitar Type: Bass - Body: Maple & Mahogany - Figured - Body Construction: Solid - Top Wood: Cocobolo (Nicaraguan Rosewood) - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 24 - Inlay: White Dot - # of Strings: 4 - Headstock: 2+2 - Bridge: Adjustable - Bridge Construction: Carbon Fiber (Graphite) - Cutaway: Single - Hardware: Gold, 1x Volume Control - Pickup Configuration: Dual - String Instrument Finish: Oil
The least expensive practice amps and basic combo amps may only have a single indicator light: an LED to indicate when the amp's power is on. More expensive amps may also have LEDs to indicate when the preamp has a signal present from the instrument (helpful for troubleshooting during set-up, because if the amp is not producing any bass sound even when the bassist is playing, and the "signal present" light is illuminated, this indicates that a signal is reaching the amp); when a limiter or similar speaker protection feature is activated (e.g., Peavey's DDT system); when clipping is occurring; or when the amp is in standby mode. Amps with a built-in tuner typically have several LEDs to indicate when the note being played is flat, sharp, or in tune.
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: fender","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"fender","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
This is the name given to the amplifier, separate from the speakers. It’s the pre-amp and amp in one box, which is usually placed on top of a cabinet or a stack of speakers. This is a common configuration for large venues, and it might be useful to have a separate amp head if you play a lot of festivals or “battle of the bands” events, where the speakers are generally provided by the organizer.
David Gilmour: Two models of Gilmour’s famous “The Black Strat” are available from the Fender Custom Shop: One is an American ’69 Strat body with an ’83 remake C-shaped ’57 RI maple neck (labeled as New old stock) with electronic and cosmetic modifications. The other is a”relic” style guitar that replicates the “The Black Strat” down to every scratch and dent. The relic version has two completely different coats of paint, just like the original.[16]

The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies.


In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.
Read Full Review Here is another superstrat design electric guitar on the list that is well recommended for a budding guitarist. While for veteran player’s out there who is on a hunt of buying an all around electric guitar on a minimum prescribe budget. The ESP LTD M-10 could be that affordable gem of a guitar you’ve been looking for and always wanted.
The Takamine F-340 was the cause of a letter from Martin Guitars in the early 1980s because Takamine’s acoustic guitars including the logo design were supposedly nearly identical to Martin Models[citation needed]. According to Chris F. Martin IV, CEO of CF Martin and Company in a speech given to the Unofficial Martin Guitar Forum members on August 8, 2005, no lawsuit was ever actually filed, and Takamine did change the appearance of their guitars[citation needed].
You can think of these as distortion pedals turned up to 11. Usually, a fuzz pedal comes in as an accent for solos and intros, since its effect is so strong that it could overpower the rest of the band otherwise. You can hear an example of fuzz in the classic recording of Jimi Hendrix playing The Star-Spangled Banner at Woodstock. This is a good type of pedal to try out as an introduction to more powerful effects.
The Reaction Many manufacturers reacted by making warranties void if amps were driven at full power, some threatened to cut off retailers who sold their amps to bands that played ‘music of the devil’. The parody of this historical contradiction has been rewritten, to fit mythical beliefs that brilliant designers created these amps for what ‘rock musos’ wanted.
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor
Search through such iconic pieces of gear as pre-war Martin acoustics, ’50s-era Gibson electrics and ’60s Fender® Super Reverb amps—or perhaps you've always wanted to play an amplifier that your favorite British Invasion or psychedelic garage band used, in which case, you'll have the pleasure of browsing countless vintage amplifiers from Vox, Danelectro, Silvertone and more. Our Vintage Collection also consists of a wide range of MIDI and pro audio equipment, with everything from dynamic and condenser microphones to signal processors and stunning keyboards made by Moog, Univox and Hohner.
The GRX70 showcases how good Ibanez is at producing great value guitars, they sure know how to keeps other guitar manufacturers on their toes. It has all the makings of a mid-tier instrument, complete with dive bomb capable bridge and great looking aesthetics, but packed inside a super affordable entry-level instrument. The basswood body with quilted art grain top is gorgeous, and a trio of pickups gives you tons of tones. A standard tremolo handles divebombing and other whammy acrobatics. This axe is perfect for burgeoning rockers who want a versatile guitar for all occasions. All in all, the Ibanez GRX70 gives you a whole lotta guitar for the money!.

Maple is the most common wood used to make guitar necks. It is very hard and dense, and often has attractively detailed grain patterns referred to as figuring. Maple also has a very bright overall tone. Due to it’s figuring and its tonal characteristics maple is often used for a veneer or top laminate on more expensive solid body guitars. It is also used as a top wood in some archtop guitars, where it is usually laminated. Its hardness brings out the trebles in a guitar's sound. It is also often used for the fretboard where it adds definition to the sound. 
List of acoustic guitar brands that include the most reliable models available. Acoustic guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson, and more. What are the best acoustic guitar companies? Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.

I was at a friends house and he had a couple of his guitar playing buddies over. We got to talking about guitar repair and setups and such. Then one the guys said “the guy I use is the be...st ever...”, and I was all like, “yeah I’m sure the guy you use is great, but the guy I know is better”. This went on, back and forth for a few minutes, when he blurted out, “I use the Cigainero brothers...”. I said “cool, me too” See More
Pictures, description and soundclips from a 1973 Fender Musicmaster bass. The Musicmaster bass changed very little between it's introduction in 1970, and it's deletion in the early 1980s. Although often regarded as a student bass, the Musicmaster was of high enough quality, both in terms of components and build, to sell to student guitarists and more advanced players looking for an affordable shortscale bass.

Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]
×