It has a solid poplar body with a maple neck and rosewood fingerboard, and based on the early reviews of the Epiphone Les Paul SL, the fit, finish and general playability are all pretty good. It’s loaded up with Epiphone’s reliable tune-o-matic bridge, a volume and tone knob, as well as a three-way selector switch to toggle your pickups and dial in tone. The hardware does feel admittedly cheap, but the general consensus is that this guitar ships well-made, well-setup and more than appropriate for a first-time player.
Launch price: $2,419 / £1,943 | Body: Alder | Neck: Maple | Scale: 24" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Bare Knuckle Johnny Marr single coils | Controls: Volume, tone, 4-way pickup selector switch, 2x 'bright' slide switches | Hardware: Jaguar bridge with Mustang saddles and vintage-style floating vibrato | Left-handed: No | Finish: Olympic White, Metallic KO
All the effects that were created up through the early 1980s were based on analog circuitry. That is, they operated by directly modifying an actual sound signal. Starting in the ‘80s, the digital revolution invaded the realm of guitar and bass effects with digital signal processing. Digital effects convert the instrument’s output to a digital bitstream that is then modified by digital circuitry before being translated back to analog sound signals for output. The first digital effects were all modeled on existing effects, but devices that followed such as pitch-shifting effects, delays, and harmony processors only became practical with the advent of digital signal manipulation.
The President was produced by Hofner in Bubenreuth, Germany, specifically for Selmer, who distributed the brand in the United Kingdom, Australia, New Zealand, South Africa, and other commonwealth nations. The President was a hollow body electric acoustic, available as a full body or thinline, and with blonde or brunette finish. It was a great playing guitar that sold fairly well in the second half of the 1950s, throughout the 1960s, and into the very early 1970s. The example shown here is a full-body depth guitar in blonde - and as a 1965 guitar, one of the last to feature the rounded Venetian cutaway. From late 1965 until 1972, the President sported a sharp Florentine cut. Naturally, such an electric acoustic suggests jazz and blues, but many of the original British Hofner President players were part of the rock 'n roll, skiffle and beat scenes of the late 50s and early 60s.
The Telecaster has also been a long-time favorite guitar for hot-rod customizing. Several variants of the guitar appeared throughout the years with a wide assortment of pickup configurations, such as a humbucker in the neck position, three single-coil pickups and even dual humbuckers with special wiring schemes. Fender offered hot-rodded Teles with such pickup configurations, the US Fat and Nashville B-Bender Telecasters around 1998. The Deluxe Blackout Tele was also equipped with 3 single-coil pickups, a “Strat-o-Tele” selector switch and a smaller headstock than a standard Telecaster. The most common variants of the standard two-pickup solid body Telecaster are the semi-hollow Thinline, the twin-humbuckerDeluxe—and the Custom, which replaced the neck single coil-pickup with a humbucking pickup. The Custom and Deluxe were introduced during the CBS period and reissues of both designs are currently offered.
This processor is pretty good quality, unfortunately not too many parameters on the effects and you can only use one effect at a time, and some prefixed combo of 2 effects (if i remember correctly 10 different options). If you need it for reverb, or slight delay, tremolo or acoustic simulator its pretty cool, not able to add exact tempo on delay or tremolo though. Sound quality is very good, 24 bit A/D and D/A so no loss there either, and you also have stereo (same effect options on both though) and balanced and unbalanced outputs (if you use unbalanced the signal goes to both outputs so you also have the balanced output if needed). For the money is definitely the best option, imagine that a reverb pedal cost the same money (just reverb) if you have a controller it will fit on your gear. I am using it with ... full review
Unlike acoustic guitars, solid-body electric guitars have no vibrating soundboard to amplify string vibration. Instead, solid-body instruments depend on electric pickups and an amplifier (or amp) and speaker. The solid body ensures that the amplified sound reproduces the string vibration alone, thus avoiding the wolf tones and unwanted feedback associated with amplified acoustic guitars. These guitars are generally made of hardwood covered with a hard polymer finish, often polyester or lacquer. In large production facilities, the wood is stored for three to six months in a wood-drying kiln before being cut to shape. Premium custom-built guitars are frequently made with much older, hand-selected wood.
I haven't had the pleasure of owning an Andrew White yet, but I plan to. I've followed the company and Andrew for some time after noticing repeated YouTube videos featuring unique guitars with lush, exotic tones. Since then, every time I've had a question or comment it is Andrew himself that responds quickly with pleasant and enthusiastic answers. Andrew White guitars have something different to offer and Andrew himself seems to be a down to earth guy with the passion of guitar building in his heart.
{"pageName":"[mf] pdp: ibanez dt52 destroyer series electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";H99039","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
Finally, have you ever heard a definitive answer to the question “how long does it take to learn guitar?” Us neither! Learning your first chords can take a few hours, but the instrument can take a lifetime to master. But that’s the joy of playing guitar – you never stop learning. It’s down to you to practise and progress, because practise makes perfect!
i think i have the exact same guitar as you do daniel. it's the same red into black faded with one pickup and no serial number tho. i'm looking everywhere for the exact model info etc. but i can't seem to find it either. i got it free froma guy i know and i had to replace the tuning heads, the strings and some of the ground wiring but now it's doing great. i love it. it has a really good sound for being so old!

ESP is yet another Japanese musical instrument brand. The brand has many artist endorsements and a ton of user recommendations. ESP was founded in 1975, and it started as a builder of custom made parts. Guitarists would use ESP parts to personalize their existing instruments. Now ESP is known for their creative versions of popular guitar shapes. The guitars are known for their fast play features and great sound. Their guitars are known for their unique and unconventional designs. For that reason, ESP guitars are most popular among modern rock and metal players.
There are several kinds of bridge (located at the bottom of the guitar, where the strings are attached), but to keep things simple you’ll usually find either a fixed bridge or a tremolo bridge. Both have their pros and cons. A tremolo bridge will allow you to experiment with everything from vibrato effects right up to full-on divebombs, and can sound amazing when playing high lead solos. However, tremolo bridges can affect tuning, unless the bridge and nut locks. A fixed bridge is excellent for sustain and tuning stability, although there’s no vibrato. Again, it’s all down to personal preference.
Arch top body size is equivalent to the flat top 000 body size, 15" wide across the top, carved sruce top, back is not carved but is arched by bracing, rosewood back and sides, unbound elevated tortoise pickguard, style 28 type multiple bound top and back with white outer layer, zipper zigzag backstripe, trapeze tail piece, rosewood fingerboard, vertical "Martin" peghead logo, nickel plated parts, sunburst top finish.
Eddie's Guitars specializes in the finest electric guitars available today. We have spent many years seeking out the best builders, brands and models available from yesterday and today. From classics like Fender Custom Shop and Gibson Custom Shop to boutique builders like Collings, PRS, Tom Anderson, Grosh and John Suhr we have every avenue of the sonic world of guitar covered.
The AX8 features the same core modelling engine as the Axe-Fx II for identical sound quality, but has different CPU power and offers just one rather than two amp blocks in its signal chain. It's still pretty potent, though, with 512 onboard presets that are built from a series of blocks. You get amp and cabinet blocks plus blocks for the most commonly used effects, and a looper. There are 222 amp models, over 130 Factory cabs, plus 512 User Cab memory slots and loads of effects. Everything has a massive amount of editable parameters to get the sound just right, either accessed from the AX8's physical controls or via the free editing software if you connect it to a computer. With rock-solid construction, the AX8 lays out its 11 footswitches in an easily accessible manner. All of them can be assigned to a host of tasks, all aimed at making your onstage experience go as smoothly as possible. Sound-wise, Fractal's realistic amp tones, carefully tailored cabinet models and crystal-clear effects give you tones that can stand up next to any conventional amp and effects rig. If you like the idea of an Axe-Fx II but aren't keen on the rackmount format or thought it out of your price range, the AX8 may be right up your street.
Now that we mentioned some of the exotics, it’s time to go back to the roots. Epiphone Les Paul Standard is as old school as it gets. Legendary LP body style that brings a no-nonsense combo of hardware has always been the way to go. I actually have one of these, and after years of playing it keeps surprising me. I’d say it easily punches way above its price range.
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.
So the most likely answer here is to increase the height of that side of the bridge a little. This may mean the 5th and 4th strings are a little higher than absolutely necessary, but it's always about compromise with these things (unless you want to individually file down the heights of each of the saddles, but I'd advise against doing that until you really know what you're doing).
{savingPercent=0.00, isPreOrder=false, pimStatus=U1, storePhoneNumber=(574) 247-0131, visibilitySalePrice=299.99, typeCondition=Vintage, statusText=In stock, isPriceDrop=true, invMsgBackOrdered=false, displaySku=113206695, stickerUrlLink=null, skuPriceVisibility=1, kitCarouselSkuIds=null, invMsgAvailability=, availableDate=Thu Oct 25 07:28:45 PDT 2018, stickerURL=null, serialized=false, listPrice=399.99, name=Sunburst, isShipsInternational=false, storeCity=Mishawaka, partNumber=null, invMsgBuyToDemand=false, inventoryStatus=1000, storeName=Guitar Center South Bend, newPrice=299.99, status=instock, priceDropPrice=100.00, condition=null, stickerText=Price Drop, stickerClass=stickerEmphasis, invMsgOverSized=false, invMsgDetail=, YourSaving=0.0, invMsgPreOrder=false, invMsgVendorDropShip=false, availableInStoreOnly=false, prop65=null, usedGrade=Good, salePrice=299.99, warranty=false, wasPrice=399.99, isOnSale=false, stickerDesc=Price Drop, displayId=113206695, storeId=620} 299.99 USD
The same bracing system and pickups in chrome covers are also included within the Vintage Reissue Series, with individual volume and tone controls, and a 3-way bat-style selector switch. Hardware includes individual chromed saddle-style mounted bridge with height adjustments, and a chrome trapeze tailpiece. The one-piece, Canadian maple set neck features a 20 fret, bound rosewood fingerboard, with pearloid block position markers.
"With a note of music, one strikes the fundamental, and, in addition to the root note, other notes are generated: these are the harmonic series.... As one fundamental note contains within it other notes in the octave, two fundamentals produce a remarkable array of harmonics, and the number of possible combinations between all the notes increases phenomenally. With a triad, affairs stand a good chance of getting severely out of hand."
It is a standard dreadnought with 26 frets. There are no electronics, no cutaway, and no fancy upgrades. It has a book matched sitka spruce top, rosewood fingerboard, adjustable rosewood bridge, cream colored plastic binding, rosewood back and sides, and a black inlaid headstock. The neck is not one piece and is made from presumably African mahogany. It has closed gold tone tuners, black beveled pick guard and some plain black line art for a rosette. This guitar is void of polyurethane and has a lacquer finish, so much the better.

I myself own an Ashton and I think that they are overall really great guitars. I own an Ashton SL29CEQLTSB Acoustic Electric and it is simply amazing. It comes with a built in tuner and the strings last for quite a very long time. I have owned a couple guitars in my time and I am happy to say that the sound is impressing. So all of the other people who put down this guitar either know nothing about guitars, are super spoiled and want the best of the best, or just had bad luck with them.
Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list
Guitarists love to get loud. I remember when I got my first electric guitar, I took it and my amp out onto my grandmother’s back porch and did my best rendition of The Man Who Sold The World, over and over again — at full blast — for several hours. In suburbia, in the middle of the day, I didn’t receive a lot of complaints. If I tried that today, in my Los Angeles apartment surrounded by grumpy neighbors, I might not be so lucky.
My question for this forum is this: I currently have a 2011 Fender Blacktop HH Stratocaster. It has the stock five position switch. All of the electronics are imports i.e.Korea, China etc.. I recently purchased a complete loaded pickguard from a Fender American Standard HH Strat. due to the poor overall performance of the Blacktop electronics-pickups included. Since the Amer. Stan. HH has only a 3 pos. switch, can I rewire it for a five pos. switch ( i.e. coil tapping the humbuckers as the Blacktop is configured)? If this is possible, where would I find a wiring diagram for these particular Fender Twin Head Vintage pickups showing them in use with a 5 pos. switch? Thank you for your time and cooperation.
Another important factor to consider is speaker size, which impacts overall loudness and tonality. Bigger speakers can push more air and have more low end, while smaller speakers have limited pushing power, while emphasizing the mids. In addition to size, different speaker models and cabinet types also introduce subtle differences to the overall sound.
The National String Instrument Corporation for manufacturing these louder guitars was founded probably in 1927, in Los Angeles, by John Dopyera, George Beauchamp, Ted Kleinmeyer and Paul Barth, when production and advertising began. The company was officially certified as a California corporation in 1928. For a detailed accounting of those early years, I recommend Brozman’s book, The History and Artistry of National Resonator Instruments (Centerstream Publishing, Fullerton, California, 1993). This is a horribly confusing relationship, so stick with me; we’ll try to put it right.
My favorite guitar effect is Tremolo with a touch of echo. This works well on songs with slower melodic guitar leads and slower rhythms. Tremolo is an effect that has a speed adjustment and amplitude adjustment. The speed needs to be adjusted to the song tempo. This was popular for many songs written in the 1950’s. If you are a guitar shredder you will not be happy with this effect. I have a Boss Guitar Pedal and Line 6 Pod XT and use this effect from the pedal. I am not crazy about software generated effects as there is not enough space on stage for all the equipment and adding a MacBook and keeping it from getting knocked around would be too difficult. After recording I have used Garage Band and this software is easy to use. I probably have four or five software packages and they are too overwhelming at times. I have given up trying to figure out how to use the software with my expensive Presonus 24 track digital AI Board. It is almost impossible to use these recording software packages without having expensive school training.
My live rig for years has been a multi FX floor pedal (currently, and for the past seven years, using a BOSS GT-8) running the left and right outputs into the effects RETURN of a small amp on stage and through a speaker cab simulator (lately, a “CABTONE” by Digital music Corp, at other times a Hughes & Kettner “RED BOX”) We often play as a ten piece band, with trumpet, trombone, three saxes… and here am I with a 30 watt Behringer amp with an 8 inch speaker, my BOSS GT-8 and a CABTONE direct box/speaker simulator going to the PA. Sounds great. (I’ve substituted bigger amps at times… a Tech21 Power Station… but to my ears, the Behringer sounds better.) You’re probably thinking… a 30 watt Behringer? That’s a “toy,” right? It’s enough. Well, that and the fact that the other “direct” channel is in our monitors, making for a rich 3D stereo sound on stage between the amp and the monitors. I am looking to upgrade to a multi effect processor that allows different cab simulations per patch – maybe the Eleven Rack… (I would have a hard time justifying the expense of the Fractal system) but honestly, I’ve been very happy with the setup I just described. Been happy with it the past seven years, and before that, it was different amps (actually bypassing everything but the power amp and speaker) and different floor processors (Digitech, Rocktron, BOSS…) but the same idea… one output to the board, the other to a small amp.
9. Boss Katana 50 1x12 Combo Amp ($199): The Boss Katana 50 is nothing to sneeze at. Perhaps one of the coolest functions is its immediate access to 15 awesome Boss pedal tones, supporting up to 55 of the BOSS family of effects. You can also customize your effects and amp settings via the Tone Studio Software or even download preamps from the Boss Tone Central website. You can also completely bypass the speaker by connecting the amps line output to a line input on your favorite device, which also comes in handy for connecting to a PA system.
Later, around 1963, rebadged Guyatone and Teisco guitars appeared, both in the U.S. and a few in the U.K., also as Futuramas. That was the beginning of several years of Guyatone-made Kents. The Teiscos seemed to be part of the 1963-64 freshman-class only. After starting with an initial group of both Guyatone and Teisco guitars, the importer seemed to settle on Guyatone as a main supplier.
It should also be mentioned, that LX does not just stand for U.S. made. Originally LX was an indicator for an Ovation guitar that included several new features that were not available on previous guitar models. Back in 2007 Ovation explained on its website, that the new features included the new OP-Preamp, an advanced neck system (lightweight dual-action truss rod, carbon fibre stabilizers), a patented pick-up (made of 6 elements), inlaid epaulets, scalloped bracing as well as a new hard composite Lyrachord GS body.[25] Back then, no such thing as an AX model line existed (the first AX models appeared on the Ovation-website in 2010). Based on the website’s history the LX features must have been introduced in 2004.
Fender are perhaps the world’s most famous electric guitar brand. Founded by Leo Fender in California in 1946, they are famed for producing the first ever mass-produced solid-body electric guitar. Since then, Fenders have been used by some of the biggest names in music, from Jimi Hendrix and Buddy Holly, to Paul McCartney and Eric Clapton. These days the company’s headquarters are in Scottsdale, Arizona, and they still produce two of the most iconic models of all time – the Stratocaster and the Telecaster.
Non Locking Tremolo FAT/SAT TREMOLO TREMOLO ARM INSTALLATION The tremolo arm can be inserted and removed very easily. Insert the arm into the armhole on the tremolo base plate. Pull up on the arm to remove it. TREMOLO ARM ADJUSTMENT (SAT PRO) To adjust the height of the arm, remove the tremolo spring cover from the back of the guitar, and use a 3 mm Allen wrench to turn the height adjustment screw attached to the bottom of the tremolo block.
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.
As for necks, the majority of guitars will have either a maple or mahogany neck, with a rosewood, maple or ebony fretboard. Again, there’s no right or wrong, and a neck wood is never going to sway your decision. But you should choose something that feels smooth and comfortable to play. There are a variety of shapes and profiles, and what you go for will depend on personal preference and playing style. For example, a modern C-shaped neck is always a safe choice as the majority of guitarists will feel comfortable using it, while a thin U-shape is great for faster players (think punk rock and metal).
7. Line 6 Spider V 60-watt 1x10 ($299.99): Line 6 has been an industry leader in the world of modeling amps and the fifth generation of the Spider is no different. Allowing you to access more than 200 amp tones, effect options and cabinet options, the Spider has a very intuitive design that will allow you to switch presets effortlessly, not to mention a color-coded control set. Perhaps the coolest part about the Spider V is the built-in wireless receiver, allowing you to plug into an (optional) Relay G10 transmitter, letting you go cordless with your guitar. With pre-recorded drums loops, built-in metronome and included onboard tuner, plus functionality with Mac/PC and iOS/Android, this is certainly an option worth checking out.
Multi-effects devices have garnered a large share of the effects device market, because they offer the user such a large variety of effects in a single package. A low-priced multi-effects pedal may provide 20 or more effects for the price of a regular single-effect pedal. More expensive multi-effect pedals may include 40 or more effects, amplifier modelling, and the ability to combine effects or modelled amp sounds in different combinations, as if the user was using multiple guitar amps. More expensive multi-effects pedals may also include more input and output jacks (e.g., an auxiliary input or a "dry" output), MIDI inputs and outputs, and an expression pedal, which can control volume or modify effect parameters (e.g., the rate of the simulated rotary speaker effect).
I have located a semi-hollow body electric Kent guitar that has a body some what like a 335 and the neck like a fender strat. The body is a beautiful natural birdseye maple. She is in awsome shape and plays well. I have the ser# (xxx) 3 digits and I believe that it was made in Japan in the Sixty's. I have no Idea what model it is or value because I can't find out any thing about Kent guitars. I've seen Kent amps guitars & drums but no info. I welcome anything.
An electric guitar works on the principle of electromagnetic induction. This means that an electric guitar has electromagnets in its system which generate magnetic fields. Apart from this, an electric guitar has an amplification system which amplifies the sound waves generated by the guitar’s string. It is this combination of electromagnetic induction and amplification system that makes an electric guitar run.

Curiously, Les Paul also contributed to recording... along with building his own recording studio at his home, he built his own disc cutting system, and did multitrack recording on acetate discs... recording on a disc, then overdubbing himself and that original disc playing onto another disc, and so on. He later worked with Ampex on multitrack tape machines, and released the first multitrack electric guitar recording on Capitol records in 1949... however, Sydney Bechet had released a multi-track recording using Paul's techniques back in 1941. 
It's a basic rule of physics (called Faraday's law) that a changing magnetic field produces electricity. So a guitar string will produce electricity only for as long as the magnetic field is changing—in other words, for only as long as the metal string is moving. Once the string stops vibrating, the sound stops. In that respect, an electric guitar is just like an acoustic one.

Description: Body Construction: Solid - Neck Wood: Maple - Neck Construction: 1 Piece - Fingerboard: Maple - Frets: 21 - Inlay: Dot - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Fixed - Cutaway: Double - Hardware: Brass, Chrome, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - Guitar Features: Pickguard - String Instrument Finish: Traditional Violin

I don’t mean to be unfair to the effect (and theoretically, this should be an article devoid of opinion). Flanging is impressive stuff. It’s just that, used heavily—where it best shows off its massive harmonics-plinking capabilities—it can become too imposing a sound for a guitarist to easily play with, which relinquishes it to the realm of background effects and early-’80s electro-pop. Still, plug in and send your brain to space and back.
This is the first, and quite possibly the best reason to invest in a good miniature guitar amp. It will allow you to play with a tone that’s enjoyable at a volume that won’t get you kicked out by your condo board. Even if you live out in the middle of nowhere, and can blast your Dual Rectifier full stack as loudly as you’d like, you still have to take the feelings of those you live with into account. Few marriages remain happy when a loud instrument is in the mix. That’s also why a mini amp is a great gift for a young student guitarist. You won’t have to hear them butcher the relatively simple line from a David Bowie tune for days on end.

For those who just start to learn guitar, buying the expensive decent guitars is not a must. You can buy an affordable entry level guitar under those famous brands or buy guitars from those brands which focus on beginner guitars. So you can buy a Taylor entry level guitar or guitar from brands like Yamaha. Yamaha FG series are great for beginners because of the decent sound and affordable price.

In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
Made of mahogany, just like the classics, the DT520 Destroyer's iconic body style has attracted many artists. Ibanez's biggest leap forward will continue to be appreciated by today's player: namely the mahogany slim neck grip and set-in neck that offer ultra-smooth playablity. No matter what the setting, the DiMarzio Air Norton pack this axe with a rich tonal palette. Gorgeous old school pearl/abalone block inlays make for a path back to one of rock's most dynamic chapters. The original Ibanez Tight-Tune bridge provides improved transfer of string vibration and better tuning stability.
He assumed the stage name Muddy Waters and released a series of historic recordings on the legendary Chess Records label. These discs established the quintessential Muddy Waters persona—the jive-talkin’, sharp-dressed, tough-as-nails, mojo-workin’ Hoochie Coochie Man. Waters’ confident, cocky vocal delivery was augmented by the knife-edge drama of his bottleneck guitar leads. This steely, highly electrified sound galvanized a new rising generation of British rock musicians when Muddy first visited those shores in 1958.

Adding effects at the mixing stage gives the engineer greater creative flexibility, but if the guitarist needs to hear the effects to play, then you may get a better artistic performance by recording them with the take. All I'd say on this point is that editing is much more difficult if the sound is recorded with delay or reverb, so an alternative is not to record these effects initially, but still add them to the monitor mix for the player's benefit during performance. Effects like chorus and wah-wah can be recorded straight off, if required, as they don't affect the ease with which a part can be edited. Ultimately, the performance is what really counts, so compromise in favour of the player's artistic needs rather than your technical needs where a choice has to be made.
For beginning electric guitarists—or experienced players who want something inexpensive and portable—we think the Fender Champion 20 is the ideal amplifier. We researched 24 models, then put the 10 most popular to the test for 20 hours with two professional instructors, a guitar student, and our Wirecutter West Coast musical instrument testing team. With a colossal variety of sounds, plus built-in effects and intuitive controls, the Fender Champion 20 was a nearly unanimous top pick.
The product also has an original feature, called ISF, advertised to “give you infinite sound possibilities, from the USA to the UK” by using pre-set bass, mid, and treble setting that the user can select between. Some customers remarked that the feature doesn’t seem to make much of a difference, but praise the tone quality and good functionality of the product nevertheless.  
This right handed 6 string guitar is just so incredible. It is renowned to have been built in high expertise, from a brand that has been in the market for quite a long period of time. It has advanced  frets that make it unique in terms of sound and tune produced. It is quite easy to set up and operate, making it suitable for beginners. The  main reason is the price which is also relatively fair, ranging from around INR 3,999. Find more on:

Usually what a lot of people complain about when they say a small amp has a lack of power, they mean that the lower tones feel a little lacking. Well, picking the right amp, and placing it right, should allow the lead guitar to shine with the high tones, while also being powerful with the low tones. Yes a smaller amp will; forever have issues with low tone, but correct construction, presence of vacuum tubes, and even simply the correct placement can all solve these problems during small gigs.

Many web surfers contact me looking for a wiring diagram for an unusual / no name / import guitar after having no luck online. And sometimes you aren't going to find it, however, if you have an electric guitar that is similar to lets say a Strat ... it has 3 single coil pickups (and they are 2 wire pickups), one 5 way switch, 2 tone pots and 1 volume pot then you can simply use a Strat wiring diagram. It's often easiest to think of the instrument in terms of components not brand.
The simplest close-miking technique using a single mic is one that’s familiar to anyone who has gigged in a venue large enough to have a full sound-support system. Stick a Shure SM57 or similar dynamic mic within an inch of the grille, and away you go. This technique frequently delivers a direct, punchy, in-your-face guitar tone that feels muscular in rock-oriented tracks. If you have a Royer R-121 ribbon mic or some other good ribbon or condenser option that can handle the sound-pressure levels involved in close-miking a guitar cab, these will offer variations on the traditional mids-forward SM57 flavor. In many circumstances this simple technique proves entirely adequate, or at least makes a good foundation to build upon, but you still need to consider exactly where to position that mic, and subtle variations of approach will reveal nuanced differences in the tones you can achieve. Also, if you’re playing a combo or extension cab with more than one speaker, listen carefully to determine which is the best-sounding speaker – or the one that’s right for the track – and mic that one (if you’re not sure, and have two appropriate mics, record two speakers to separate tracks to select from later, more of which below).

It has a wide dynamic range and a 20dB attenuator, which alongside a bass-cut filter should clear out any noise that’s not supposed to get over your guitar track. Add to this an integrated suspension to reduce any vibrations when playing on stage and you get a highly functional condenser microphone that won’t capture anything else than what’s supposed to.

To combat this, many jazz players began to favour semi-acoustic guitars. These often came with feedback reducing wooden blocks installed inside the body, which addded extra weight to the instrument. But, with the welcome side effect of increasing the amount of sustain produced. Gibson and Ibanez cornered the mass-production market, offering a range of hollow bodied guitars which were well received by jazz players as well as players of genres like blues and rock n’ roll. As time went on, many players even gravitated towards solid body guitars, on account of the unique and arguably more versatile palette of sounds on offer.
In 1958, Gibson introduced the ES-335 as part of its Electric Spanish line of guitars, and it was the world’s first commercially released semi-hollow guitar. Featuring a solid center block in an otherwise hollow thinline body, the then-radical design effectively combined the round, airy tone of a traditional archtop with the sustain and feedback-fighting benefits of a solidbody. Its groundbreaking design is one of the most imitated around.
This project began as a quest to find a really good software piano. Not even the expensive commercial versions were satisfying to my ears.  Most had velocity switching problems and unpleasant tones. I came across the University of Iowa Steinway piano samples which were great but there was room for improvement in the way they were presented.  My goal was to have a selection of piano and other instruments that were pleasant to play and to keep them available for free. Using SoundFont editing programs Polyphone and Viena I have done some editing to allow for expression to give a more enjoyable and realistic playing experience where timbre changes gradually with velocity where possible and without that annoying jump that is commonly found. This was applied to many of the other instruments as well.
Pickguards were white pearloid, or sometimes tortoiseshell, the neck used a string tree, and the all-around makeup of the guitar was bigger than later iterations — thicker necks, bigger and heavier bodies, larger fret markers. One obvious differentiator is the logo on the headstock; the earlier models, and even a few released as they moved into Phase Two, had a raised plastic “Univox” logo on the headstock.
Fender had an electronics repair shop called Fender’s Radio Service where he first repaired, then designed, amplifiers and electromagnetic pickups for musicians—chiefly players of electric semi-acoustic guitars, electric Hawaiian (lap steel) guitars, and mandolins. Players had been ‘wiring up’ their instruments in search of greater volume and projection since the late 1920s, and electric semi-acoustics (such as theGibson ES-150) had long been widely available. Tone had never, until then, been the primary reason for a guitarist to go electric, but in 1943, when Fender and his partner, Clayton Orr “Doc” Kauffman, built a crude wooden guitar as a pickup test rig, local country players started asking to borrow it for gigs. It sounded shiny and sustaining. Fender got curious, and in 1949, when it was long understood that solid construction offered great advantages in electric instruments, but before any commercial solidbody Spanish guitars had caught on (the small Audiovox company apparently offered a modern, solidbody electric guitar as early as the mid-1930s), he built a better prototype.
Midco International, a former musical distributor, sold the Lotus brand as an exclusive trademark of guitars during the 1970s and 1980s. Like many other distributors, Midco commissioned a manufacturer in Asia to build guitars under a unique brand name. However, many of these factories in Asia received requests to build guitars for multiple manufacturers/distributors, meaning the same guitar could essentially end up under multiple trademarks. This isn’t much different from what Harmony, Kay, and other house-brand jobbers from the Chicago area were doing in the 1940s through the 1960s.
Jump up ^ Wright, Michael. "Jack Westheimer — Pioneer of Global Guitarmaking". Vintage Gutiar (July 1999). In August ’69, the Valco/Kay assets were auctioned off and W.M.I. purchased the rights to the Kay brand name. W.M.I. began to slowly transition Teisco del Rey guitars to the Kay brand name, which gave them greater credibility with dealers. This change was completed by around ’73 and the Teisco del Rey name then disappeared. This explains why you will occasionally see a Teisco guitar with a Kay logo.
The Hughes & Kettner Tube Meister 36 is a distinct looking tube amplifier head that's packed with features. For something that's compact, this amp can do quite a lot of what bigger amps can in terms of functionality, including having three channels that let you switch between clean, crunch and lead and a full set of complementary controls to tweak each channel to your liking. Another interesting feature of this amp is its TSC (Tube Safety Control), which automatically keeps the tube in bias and monitors them to extend their use. Finally, this amp head comes with a built-in Red box DI, so you can plug the amp head straight to any PA system or recording console without any problem. The people also installed a power attenuator into the amp, which lets you lower the rating to just 1 Watt for quiet practice. Wrapping up its features is the built-in reverb, which compliments the amp instead of distracting users.
The AC10 was one of the first amplifiers to bear the VOX name and has long been adored for its ability to achieve rich, articulate tube tone at very manageable volumes. For this reason, the AC10 has become a highly coveted piece of VOX history since its discontinuation in 1965. It was re-introduced in 2015 as model AC10C1 and has proven to be very popular as a quality option to the Fender Blues Jr. and Fender Princeton.
People sometimes don't really know what they want and use other brands of amps. They haven't found their sound yet and kind of trying other stuff or heard someone or some artist talking of using it and try. But that is not good enough and then they try a Fender. With a Fender you can create your own sound whether you are using pedals or just using the amp and the guitar. A true wonder for every player. Fender's just the best
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.

I haven't listened to all the amps on the list but found the Rivera Knucklehead blew away every Fender, Marshalla and Mesa in the shop when I was testing things out for the clean blues with a PRS. My daughter playfully plugged in a Gretsch baritone, cranked up the gain and Three Days Grace came screaming out with the finest quality. She agreed the Knucklehead was a win.
I think it's fair to say that we all have a pretty good idea of what reverb is, though there are several ways of emulating it in the studio. Early reverb chambers, plates and springs have now given way to digital solutions, which fall into two main camps: synthetic and convolution. Synthetic reverbs take an algorithmic approach, setting up multiple delays, filters and feedback paths to create a dense reverberation effect similar to what you might hear in a large room. Though these often sound a bit 'larger than life', they've been used on so many hit records that we now tend to accept their sound as being the 'correct' one for pop music production. Most can approximate the sound of rooms, halls, plates and chambers, but in comparison with a real reverberant environment, the early reflections often seem to be too pronounced. The advantage of a synthetic reverb is that the designer can give the user plenty of controls for altering the apparent room size, brightness, decay time and so on.

For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.
Completely agree. A couple years ago I was also wanting a software guitar to play some simple chords over a track. Instead I spent about $140 on a guitar from Craigslist. A couple weeks and a couple dozen YouTube tutorials later and I was able to play the chords myself. Learning to play the instruments is a valuable skill that will separate you from others who just use software.
That’s not to say you need a specific guitar for each style — if you want a larger range of tones for different genres, a solid-body guitar is a good bet. There are also plenty of guitars on the market that include both humbucker and single coil pickups, thus allowing for even more sound options. Still seem too complex for you? If you look to the pros you’ll see that Gibson’s Les Paul and Fender’s Stratocaster have been used over and over again by recording artists. It’s not a coincidence: they’re capable of a lot of versatility. Yes, they differ from each other in tone, but with the right additional gear, you can replicate a ton of sounds.
15 years ago a friend brought his in Miami i think. The guitar sounds amazing and the care for making it was awesome. The guitar have a cristal like sound and shines particulary well. Today i've acquire it from him by a fair trade: i purchased a new Falcon guitar, wich is the best brand here in Peru, and trade it for his Palmer. Is the best trade i've done. Not sure for him ;) My friend paid $100 for it 15 years ago and the model is PF20. Hope this information was helpfull
Some of the more distinctive specifications include, the headstock shape, tuners, neck and fretboard, bridge, and pickups and electronics. The headstock shape is based on PRS’s trademark design, but inverted to both accommodate Mayer’s playing style and also to keep a consistent length of string behind the nut, which makes staying in tune easier. The tuners are a traditional vintage-style, closed-back tuner, but with PRS’s locking design. The neck shape was modeled after 1963/1964 vintage instruments, and the fretboard has a 7.25” radius. The moment your hand grabs this neck, it just feels right. Like the tuners, the steel tremolo takes a classic design and incorporates PRS’s trem arm and Gen III knife-edge screws. The bridge on the Silver Sky is setup flush to the body in the neutral position so that the tremolo bridge only goes down in pitch. By keeping the bridge in contact with the body, the guitar itself is acoustically louder, which improves the signal to noise ratio of the single-coil pickups. The 635JM single-coil pickups are very round and full, with a musical high end that is never “ice-picky” or brash.
But the biggest difference between the American Special Strat and the Highway One model is in the pickup configuration. This guitar comes equipped with three Texas Special single-coils, which are overwound Alnico V pickups known for their tight bass, clear highs and pronounced mids. Famously, they’re also found on the Stevie Ray Vaughan signature Strat. And significantly, these pickups retail for about $200 for a set of three.
International shipping and import charges paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping and import charges are paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab International shipping paid to Pitney Bowes Inc. Learn More- opens in a new window or tab Any international shipping is paid in part to Pitney Bowes Inc. Learn More- opens in a new window or tab
The Epiphone Dove Pro continues to work its old school magic into the hearts of guitarists, new and experienced alike. Its classic styling seems to be a major part of its appeal, as most reviewers attest to. Value for money comes in as close second, with many satisfied that they are getting a great looking solid guitar at a very justifiable price point. It is used in many different musical styles, including country, folk and even rock.
One important thing about caring for a guitar is keeping the wood supple and moist, and quite often, you have to purchase a separate humidifier block with any guitar. Not this guitar, though. The Cordoba C12 comes with its own humidifier block right in the case. You just have to make sure you keep it moist every week. It is now ranked first on the best classical guitar list.
@Danny – As an EQ is used to filter and tweak the tone of the signal passing through it, this can be placed anywhere in the chain. For example, if you want to tweak the overall sound before the amplifier, place the EQ at the end of the signal chain. If you want to adjust the tone of your guitar before it hits your effects pedals, place the EQ at the front of your signal chain. It just depends on what you are planning on doing with the EQ and where in the signal chain it sounds best to you.
Mike Hedges also uses this idea a great deal, and explains how it really comes into its own at the mix. "You've got two or three tracks of guitar: one clean, one medium — say, half-driven — and then one really driven. As the song progresses, you might use the nice clean track during the verse, as you're coming to the bridge you fade in the heavier guitar sound, then back it off a bit, into the chorus with everything full on, then back to the next verse and drop it all out. It's all done on one guitar track, so it doesn't sound like you've done 10 guitar overdubs. It has a different quality, it sounds like a live performance, but you've got real dynamics in the sounds. It's a very effective technique."
The final stages of on-board sound-shaping circuitry are the volume control (potentiometer) and tone control (a low-pass filter which "rolls off" the treble frequencies). Where there are individual volume controls for different pickups, and where pickup signals can be combined, they would affect the timbre of the final sound by adjusting the balance between pickups from a straight 50:50.