After you have good coverage, let it dry for a few days or until it has hardened up enough. Inspect the surface for and runs or imperfections. If there are any runs them you can wet sand them flat with 800 grit wet sand paper and a sanding block. Usualy you will be able to see if there is any grain showing that you might not have filled up when you preped the body. If there is them apply a few more coats to cover it up and wet sand it to make it level.
The top is made from spruce and features X-bracing, while the back and sides are made from basswood. The FA-100 also sports a very playable maple neck, with a rosewood fretboard and 20 frets. It would work very well for beginners, as it provides a defined, crisp sound that’s well suited to plucking or strumming, and good for everything from rock to country.
(48 Contiguous U.S. States) Free Free Shipping With Backstage Pass 92118 2-Day Standard Ground {savingIsUpTo=false, MSRP=1430.0, listPriceRange=false, isFreeShipping=true, download=false, isPriceDrop=false, salePriceRange=false, YourSaving=0.0, productId=site1prodL21430, MSRPRange=false, enablePDPColorOption=true, showBrandNameWithProduct=true, restockStartAmount=null, priceVisibility=1, listPrice=999.99, salePrice=999.99, isOnSale=false, showMSRP=true, restockCount=0}

Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.


Second, you might be wondering if it’s just better to get a cinematic VST or one that takes from a range of instruments. Fractured does have cymbals and bass kicks but, of course, the guitar creates these and this gives them a lot of offbeat character. You could easily get a more rich and deep bass kick with a drum VST, but then you lose that quirkiness that propels and highlights Fractured.  
Reverb is still the most commonly installed effect in amps, but there are some amplifiers that go overboard, to the point that they outdo even multi-effects units. Unfortunately, even those with the most number of effects allow for limited simultaneous use, so no, you can't put 10 virtual pedals together in your practice amp. Also don't expect the quality of built-in effects to match that of boutique pedals, but they can be a great addition to an amp if used sparingly and for appropriate songs.

American Fenders and USA Gibsons are not NOT for beginners! They are for people like myself who have invested 15+ years into developing the skills required to defend a purchase of one. IF you want beginner guitars, go see Mexico Fenders or Epiphone Guitars. Better yet, worry more about your skill and not which brand in on your headstock. I played for 11 years before I upgraded my Epiphone to a Gibson.
The F-65 was the top of the line with two equal cutaways. Other than the bookmatched cutaways, this was the same as the two-pickup F-55, with the addition of a Bigsby-made Martin vibrato in which the stylized “M” had become a similar “V” shape. Probably the strangest feature of the F-65 was the fact that the heel of the neck did not change from the single-cutaway models, creating a sort of thick chunk of body extending up to the 14th fret. The first F-65 was #179834. 1,825 F-65s were made from 1962 to the summer of ’65.
Anyways, it sucks to not have a camera to show stuff or even a way to measure stuff I'm describing. I'll have to obtain a few small things to set it up. like a saddle and an allen wrench that doesn't suck. Probably whatever caliper or shim they use to do real setups as well. Maybe latter frames just have tilted bridges after a while. I don't really know. The bridge is rather thick. If you lower the bridge, do you just sand it?
• Why fret ends get sharp: Sometimes the end of the fret wire can become sharp or, more accurately, protrusive at the sides of a guitar’s neck. Besides being rough on the hands, this is an indicator of a trickier problem: that the fingerboard has become dry and shrunk. This means that the guitar has been kept in an environment that lacks the proper humidity. More careful storage is the ultimate answer, but using lemon oil on the fretboard also helps prevent this from happening by moisturizing the wood.
ACT TRMOLO ERSETZEN DER SAITEN Das ACT Tremolo erlaubt zwei Arten der Saiteninstallation. 1) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Rückseite der Tremolo-Einheit angebracht. 2) Die Saiten werden durch Einsetzen des Kugelendes in den Saitenschlitz und Einhaken des Kugelendes unter dem Saitenfänger an der Unterseite der Tremolo-Einheit angebracht.
Reverb is one of the most fundamental effects for electric guitar, which is why it is already built into most amps. Reverb adds natural sounding depth to your sound. Used extensively in the recording world, electric guitars do not sound “right” without it. Just a little makes the guitar have more of a natural sound and decay, but you can go to the extremes and get cavernous depth to your sound. Plate and spring are the most common types, but with so many makers coming up with new sonic “spaces” to play in, finding your reverb sound is a priority.

Having perfected the modelling amp concept, Line 6 have become experts at delivering a huge variety of great sounds in a convenient, affordable package. Experiment with 12 different amp models, from classic 1960s Fender tone to the “Insane Red”, inspired by the mental Mesa/Boogie Dual Rectifier, and sculpt your tone further with the seven built-in effects.

Though comfortable playing many styles, Atkins was most often associated with country music and the acoustic guitar. By using a combination of his fingers and a thumb pick, he created his signature “fingerpicking” sound—a style somewhat inspired by fellow guitarist Merle Travis. Atkins even recorded a duo album with Travis, as well as with other respected guitarist like Doc Watson, Les Paul, Jerry Reed and Mark Knopfler.
Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.

List of bass guitar brands that include the most popular and reliable models available. There is a lot to consider when looking for the perfect bass guitar for you. The body style, neck, scale length, tuning machines, intonation, fingerboard, number of frets, pickups and type of wood all make a difference in how your bass guitar sounds and feels in your hand. The most popular bass guitars include those from major manufacturers of musical instruments, including Fender, Yamaha, Warwick and more. Use this comparison of bass guitar brands as a guide when researching the best bass makers.
Next in line after pitch shift/harmonizer and envelope follower effects are pedals that directly interact with the pickups’ output levels, such as vintage fuzz, treble booster and Octavia/fuzz octave pedals. As with the dynamic filter pedals, placing any other effects that compress the signal in front of these pedals will limit their overall performance.
I work out of my home shop in Idaho Falls, Idaho. I do repairs for clients and guitar shops all over the United States. I’d love to help you repair or restore your guitar. Repair prices are based on a rate of $60 per hour. These prices apply to guitars in otherwise good working order. Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss. Consultations are always free.
It’s provided as-is with no support, but it’s still well worth checking out if you’re on a PC. According to the developers, it was born inside an academic research project about the modelling of electric devices, and then applied to the musical instrument field as an evolution of the techniques available in commercial units. Its most important feature is the high precision of the simulation.
The Epiphone Dove Pro continues to work its old school magic into the hearts of guitarists, new and experienced alike. Its classic styling seems to be a major part of its appeal, as most reviewers attest to. Value for money comes in as close second, with many satisfied that they are getting a great looking solid guitar at a very justifiable price point. It is used in many different musical styles, including country, folk and even rock.
In 1977, Gibson introduced the serial numbering system in use until 2006.[71] An eight-digit number on the back shows the date when the instrument was produced, where it was produced, and its order of production that day (e.g., first instrument stamped that day, second, etc.).[72] As of 2006, the company used seven serial number systems,[71] making it difficult to identify guitars by their serial number alone.[71][72] and as of 1999 the company has used six distinct serial numbering systems.[72] An exception is the year 1994, Gibson's centennial year; many 1994 serial numbers start with "94", followed by a six-digit production number[citation needed]. The Gibson website provides a book to help with serial number deciphering.[72]
custom made guitars luthier services alvarez ampeg benedetto boss breedlove collings danelectro ,dean,digitech eastman electro-harmonix ,grinning elk, electro-harmonix epiphone fender- fender-custom-shop fender-usa fulltone g&l gibson godin gretsch guild hagstrom hal-leonard hamer harmony heritage hofner ibanez jackson kay line-6 marshall martin mxr national orange ovation paul-reed-smith peavey prs prs-paul-reed-smith rickenbacker roland silvertone suhr takamine taylor vox washburn yamaha 000-18 00-18 4001 asat-classic catalog champ classic custom-22 custom-24 d-18 d-28 d-35 deluxe es-125 es-175 es-335 flying-v j-45 j-50 jaguar jazz-bass jazzmaster l-00 lap-steel legacy les-paul- les-paul-classic les-paul-custom les-paul-deluxe les-paul-jr les-paul-junior les-paul-special les-paul-standard les-paul-studio lg-1 lg-2 melody-maker mustang precision- precision-bass sg sg-special sg-standard strat,bass guitar,speakers,parts,effects pedals stratocaster- telecaster telecaster-custom telecaster-deluxe telecaster-thinline..Greg's Guitars is the only author of "The Vintage Guitar News and Views.
Replacing switch and jack covers. These are the plastic or metal covers that hold the jack and tells you witch switch is treble or rhythm. The switch cannot be repaired and will need to be replaced, however, a metal jack plate can never break and only will need to be cleaned. A plastic plate will need to be replaced or the screw holes need to be resized, do so properly and make sure every fastener is snug including screws and nuts.
With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
"Later, in the '70s, a line of low-priced Japanese-made instruments were imported and sold under the Dorado name in an effort to compete with the flood of imports inundating the market. Flattop acoustics and solidbody electrics alike were sold under the Dorado name. None hold much in common with Gretsch's own guitars." Also, that Gretsch had been sold to Baldwin prior to 70's; reacquired
Among the most common rookie amp buyer mistakes is buying a big amp that's too heavy to gig with, or going the opposite and buying one that's too small. If you're gigging at different places and you don't have a roadie, then consider going with a smaller amp that has DI output so you can go straight to PA with your tone intact. In big venues where big amps are a must, some opt for amp heads because the separated head and speaker cabinet are lighter on their own, although you'll have to move more pieces.
Most guitars out there usually feature a version of either one of many Gibson designs or Fender ones, but there are exceptions. Paul Reed Smith is a brand that took their own path in just about every aspect of guitar design. This made it popular with many famous guitar players, most notably Carlos Santana. The model we're looking at today is a basic version of one of their flagship guitars. The balance of performance and pure style it offers is nearly as impressive without forcing you to extend out of your monetary reach.
{ "thumbImageID": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46217000004000", "defaultDisplayName": "Fender American Professional Stratocaster Maple Fingerboard Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Sienna Sunburst", "sku": "sku:site51500000030466", "price": "1,499.99", "regularPrice": "1,499.99", "msrpPrice": "1,500.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst-1500000030466.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46217000004000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Sienna-Sunburst/J46217000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030469", "price": "1,399.99", "regularPrice": "1,399.99", "msrpPrice": "1,400.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive-1500000030469.gc", "skuImageId": "American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive/J46217000006000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/American-Professional-Stratocaster-Maple-Fingerboard-Electric-Guitar-Antique-Olive/J46217000006000-00-60x60.jpg", "imgAlt": "" } ] }
Schecter Guitar Research Company was founded by David Schecter in1976. This manufacturing company produces large number of electric guitars, bass guitars, and steel-string acoustic guitars, as well as offering hand-built custom instruments and a small line of guitar amplifiers. The schecter known for its schecter “c” shape body. This brand is known for its better quality of wood and handsome finishing.
The Headload may be the ultimate tool for gigging electric guitarists. It has the same features as the JDX 48, but allows the player to adjust the phase of their signal to be matched with a microphone and comes with equalization controls to further sculpt the sound of their direct signal. Most importantly, the Headload is a “load-box”, meaning that it can absorb the energy of the amp’s head and produce a lower volume through the amp’s speakers. This is crucial, since most guitarists only like the sound of their amp when it is driven hard at high volumes. Unfortunately, amps being pushed to their full volume is not as enjoyable for the audience. The Headload also allows guitarists to play through their favorite sounding amp heads without even needing guitar cabs!
Gibson: These guys have been making musical instruments for well over 100 years. Founded by Orville Gibson back in 1890 and not producing guitars at the time (and certainly not electrics because those hadn’t even been invented yet), Gibson has had plenty of time to cement itself as one of the leading guitar companies. They are one of the few to keep their main brand name as a prestige-only brand and applying a different brand name (Epiphone) to their imported, lesser-priced instruments. They invented the arch-top guitar and created some of the most iconic instruments in guitar-history. These includes their by far most famous model, the Les Paul. Other iconic models are the SG, Explorer, Flying V, ES-175 and the Firebird. The ES-175 was to become the first really popular electric guitar. This happened before solid body guitars had even been invented. To this day, the Gibson Les Paul remains one of the most desirable and expensive guitars in the world. In order to tap into various price-points, Gibson creates less expensive Les Paul models around the $1,000 range, like the very popular Les Paul Studio. The more expensive models such as the Les Paul Standard are up in the $2,500+ range. Finally, there are even more expensive models such as the Les Paul Custom in the vicinity of $3,000+. Off course, they also create some very special limited run guitars than can easily fetch close to the $10,000 mark. In line with the car analogy earlier: While not Italian, I’d be happy to call the $2,500+ Gibsons the Ferraris of the guitar industry.
Fished around here on Amazon and ordered two of these Sky guitars instead. With the shipping and import taxes they still came out costing less than the plastic toy junk. The girls were predictably overwhelmed. What's a 5- or 7-yo going to do with something like this? These are in fact real electric guitars. They are substantially constructed and while they may not have the level fittings you'd see on a professional's expensive Fender or Gibson, they work well. The little amplifier is not strong and distorts at high volume but it too works well at modest volume levels. Although it is not included, there is provision for connecting a 9v AC adapter which you'll want to get as even this somewhat weak amp will go through a 9v battery pretty quickly.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.
There is no right or wrong answer when choosing a guitar. Choose whichever guitar suits your style. If you are inspired by electric guitar players, you may want to follow suit. If unplugged acoustic sounds tend to be what you enjoy most, then the acoustic guitar is the right choice for you. If you’re still not sure, make a list of ten bands or artists whose styles you’d like to emulate. If the list is predominantly electric, go electric. If it’s acoustic, then go acoustic.
Note that much of information and pictures are courtesy of Paul Bechtoldt and D. Tulloch's book, Guitars From Neptune", 1995. Much of this book is catalog reprints, but from it and American Guitars by T. Wheeler, I was able to construct this information. Personally I've never really actively looked for these guitars, so my knowledge base is somewhat limited. But a lot of people buy these at garage sales, flea markets, etc, and ask me about them. There doesn't seem to be a lot of information out there. This is probably because Danelectros and Silvertones are considered "low end" vintage guitars at best, and don't sell for a lot of money. So I hope this page will be of some help in their identification.
Shop our selection of guitar and bass electronics parts and supplies. Everything you need to to finish your guitar electronics project like a pro. Volume and tone pots, pickup selectors and mini switches, jacks, tone capacitors, wire, solder, shielding and more. Get the full potential from your guitar's pickups with the finest quality guitar electronic parts from top manufacturers like: CTS, Bourns, Fender, Switchcraft, CRL, and more. 
Pictured is a tremolo arm or vibrato tailpiece style bridge and tailpiece system, often called a whammy bar or trem. It uses a lever ("vibrato arm") attached to the bridge that can temporarily slacken or tighten the strings to alter the pitch. A player can use this to create a vibrato or a portamento effect. Early vibrato systems were often unreliable and made the guitar go out of tune easily. They also had a limited pitch range. Later Fender designs were better, but Fender held the patent on these, so other companies used older designs for many years.

1975 Gibson Les Paul "Goldtop", Deluxe to Standard conversion, Electric Guitar. This is from my personal collection. I have another and mostly play my Strat and Tele for the music I'm doing now, so it's time to thin the herd (be aware that I might change my mind about selling it). Great, original Gold Top finish with nice checking. I was actually trying find one with a lot of "green" wear on the top of the body, but this one still has some good character (I hate shiny guitars). Plenty of wear to the finish on the back (see photos). Other than a pickup change and strap button change, the guitar is as I bought it used. When I purchased it there was a set of THC, PAF'S installed (don't ask, they're gone). Personally, I didn't care for them for a few reasons, so I replaced the front with a new, Gibson 490R, AlNiCo II and a Seymour Duncan, Seth Lover in the bridge.  Pots have been replaced and the selector switch appears to be original. It already had the Deluxe to Standard conversion work done (no the truss rod cover is not the original, as it should say deluxe). I believe the bridge and tailpiece are newer units as they shine too much for the rest of the guitar. The jack plate has been changed from plastic to metal. I installed the Schaller strap lock buttons. The tuning machines have been changed to sealed Grovers. The headstock has been re-fin'd in the back, from an what looks to be repairs around the tuners. In doing so, the serial was made very faint, and only somewhat readable. Appears to be "92?128". Has the 70's volute for added headstock strength. Bound, Rosewood fingerboard. Mahogany neck. Plays and sounds great. Original frets have normal amount of wear with plenty of years left in them. Neck and action is adjusted perfectly (for me anyway) and I did guitar set-ups for 12 years at a Fender / Gibson / Martin / Yamaha / etc dealership at $45-$150 a pop. I have sold guitars for many years and have been to "vintage" shows, so I'm fairly versed in guitar speak. This is not a "minty" show piece. If that's what you're looking for, then buy another guitar. This is a player's guitar. The guitar has not had the headstock broken off however like many used Gibsons. We have completely done a "Pro" set up on the guitar, including cleaning all the electronics, tightening machines, oiling the fingerboard, adjusting the neck and action for great playability (clearance at the 9th fret = .012 when fretted at the first and the body) and cleaning and polishing. STAYS IN TUNE!!! I play it though all three of my amps, a Trace Elliot "Super Tramp", Marshall JCM-800 and a '67 Fender Super Reverb (original). Plays and sounds great for about any type of music, except the currently installed pickups are probably too hot for jazz. We also installed a new set of .010 strings. The cream colored pick guard and chrome bracket is in the case pocket, I just removed it as I don't play with them installed on any of my Pauls. It's in fine shape if you wish to install it. Guitar weighs in at 10.5 lbs, assuming our UPS scale is reasonably correct. Original Gibson, Les Paul case with the purple lining included (the lockable latch is locked "open" and we do not have a key. Case still stays closed with the other latches. It was that way when I bought it years back). 

(Book). To mark the 60th anniversary of Fender, Backbeat's introduced a new, completely revised third edition of this bestseller. Fender guitars have long been the instruments of choice for artists such as Jeff Beck, Eric Clapton, Jimi Hendrix and Stevie Ray Vaughan. This book tells the complete story of Fender guitars, detailing classics such as the Telecaster, Stratocaster & Jazzmaster as well as lesser-known models. Dozens of photos reveal Fender's storied craftsmanship, while the text includes collector details for all models. The reference section lists all models and their statistics. This new edition has been refreshed and updated, with 56 extra pages and over 60 new photographs. The main text has added material and has been brought up to date to cover Fender's ever-changing history amid the fascinating developments for the company and its instruments during the eight years since the previous edition.
While most instruments made by Harmony and Kay were much cheaper than Martins, Gibsons or Fenders, the upper-level, more elaborate ones actually cost more money than some lower-end and even mid-priced Gibsons and Martins. A top-of-the-line Harmony, Kay or Silvertone made by Harmony featured inlay, binding and multiple pickups, switches and knobs, and cost more than a Les Paul Junior or Special and in some cases fully as much as a Les Paul Standard. While one of these instruments in near-perfect condition today might fetch $1,000 or more, it certainly would not have been nearly as good an investment as spending less to buy a Les Paul Junior and sure enough not as good an investment as spending an equal amount to buy an original 1959 sunburst Les Paul Standard.
Thanks to these affordable guitar kits, you can now build your own guitar without having to craft body parts from wooden tables and planks. Unlike Brian May and his dad, who built the iconic "Red Special" guitar from wooden tables and planks - all you have to do is order a guitar kit online, and you are free to assemble and customize as you prefer. These guitar kits reduce the skill and cost requirements of guitar building considerably, making for great entry points into lutherie and guitar modification.

Make sure to sit down and strum the notes when trying out a guitar. It should not be hard to push down the strings with your fretting hand, even if you are just starting out. The action should be as low as possible to make learning easy. Make sure to check for loose parts; there should be no rattling noises coming from the inside of the guide or inside of the neck. Also take a business card and run it along the bottom of the bridge to make sure that the bridge isn't coming off. An electronic system is not a big deal when buying an acoustic because it's relatively easy to add an electronic pickup component later on should you decide you need one.
Staggered brass saddles offer individual string intonation never before available in a design of this type, still widely regarded as the tone machine. The baseplate itself is a faithful reproduction of the original, made from steel, very important in a bridge of this style due to the tonal effect it has on the magnetic field of the pickup mounted in it.
The only reason the Yamaha Pacifica would have low action is if the string height was set low. Just making a broad statement like “if you want a low action guitar buy a Yamaha Pacifica” I know that is not your words but that is what you seem to be implying. Some beginning guitar player could buy a Yamaha Pacifica that has high action. All guitars can have low action if they are set-up to have low action. Some good info here regardless. Ben.
If this were a list of the best electric guitar brands for metal it is very likely Jackson would be near the top. This is a company practically synonymous with metal, and for decades the most extreme players on the planet have looked to Jackson to get the job done. But Jackson also has a strong presence in the rock and hard rock genres, and if that’s your bag you’d be smart to give them a good look.
While Gretsch is known for semi-hollow and full hollow body guitars, and it is only fitting that one of their semi-hollow chambered body models make this list, specifically the Gretsch Electromatic Pro Jet Bigsby. Being part of their Electromatic line, brings with it all the Gretsch goodness minus the premium appointments, at a very accessible price point. It is a true archtop thinline guitar, that passed the same attention to quality and detail that more expensive Gretsch guitars also go through.
Thanks for this explanation. I have built a few electric guitars, but they have been in the Gibson style with two humbuckers. I am now working on a guitar with an HSH configuration, so for starters, I needed to understand the basic 5 way switch, which if you just looked at it, it makes no sense. Now I see that the wipers of each pole are on the opposite end of each side.
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.
With sharp double-cutaways and the recognizable Rickenbacker body shape made from maple, the semi-hollow Rickenbacker 330-12 12-string electric guitar has proven to be one of the brand's most popular models since the 1960s. The 330-12 has been used for its jangly sound, perfect for pop and various other genres, by the likes of Tom Petty, Johnny Marr, and Peter Buck, to name a few.

Buying an electric guitar is a very personal process, with many things to consider before you make your final choice. It’s not just a case of picking something with a nice color – you are usually parting with a substantial chunk of hard-earned cash, ranging anywhere from $100 to $2000 – or more – for some guitars, and therefore patience is required to find something that really suits you.
Two of the strongest reasons to buy an acoustic guitar are user-friendliness and price. Some musical instruments are prohibitively expensive for beginners, and they’re difficult to learn, too. Not the acoustic guitar. Acoustic guitars are easy to learn, easy to carry, easy on the ears. And you can buy an acoustic guitar for an affordable price. The most difficult challenge in purchasing an acoustic guitar is finding the ideal fit for you. In this shopping guide, we will discuss some important elements to consider when browsing the acoustic guitar market.
Description: Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-S-H - String Instrument Finish: White, Black, Red, Sunburst
One of the factors bassists keep in mind when selecting a combo amp or an amp head is the amount of "headroom" that the amplifier will provide them, given their intended performance venue and music genre. "Headroom" refers to the amount by which the signal-handling capabilities of an audio system exceed a designated nominal level.[20] Headroom can be thought of as a safety zone allowing transient audio peaks to exceed the nominal level without damaging the system or the audio signal, e.g., via clipping. In loud music genres and in genres where bassists seek a clean, clear bass tone, bassists seek to avoid power amplifier clipping, so they typically choose amplifiers which provide enough headroom to avoid power amp clipping. Headroom has been defined as a "...safety zone or wiggle room".[21]"[H]aving enough headroom is essential for solid-state equipment like bass amplifiers and power amplifiers. If you lack this, you can expect a harsh mid range tone, a lack of dynamics and possibly blown speakers".[21] Having enough headroom is also important for bassists seeking to retain a "clean" sound even in loud, high-volume performance settings.
Searching for something to give them a boost, in July ’68, Ovation introduced its first electric guitars – the Electric Storm series. Two models were available initially, the Thunderhead and the Tornado. These were f-hole semi-hollowbody thinline, equal double-cutaway guitars with German-made bodies, bolt-on Ovation necks, and Schaller hardware. Most had Schaller pickups with metal covers, a row of poles along each edge, and split, small, black inserts in the middle. Each was available with or without vibrato.

While Ujam has only been in business since 2010, their members aren’t new to VSTs or even guitar VSTs for that matter. In 2002, Steinberg released Virtual Guitarist, developed by Wizoo, and this was one of the first VSTs that brought credibility to guitar VIs. It just so happens that the man that founded Wizoo, Peter Gorgers, founded Ujam and brought along many of the members, ensuring the same level of detail.
A closer look at a 1981 Gibson Victory MV-II electric guitar. The Gibson Victory MV, or 'Multi-Voice' guitars had very wide tonal palettes; with coil-tapped humbuckers they could produce typical Gibson tones, but were also designed to 'out-Fender' Fender. Two models were launched in the summer of 1981. Whilst the MVX, was designed to do everything a Stratocaster could do, the MVII was 'primarily for the discerning country player' - placing it squarely against the Telecaster.
Deco Tape Saturation & Doubletracker is a unique effects pedal that allows for a wide variety of tonal possibilities.  You can place Deco near the beginning of your signal chain and use the Tape Saturation as a light overdrive.  Or, you can place Deco at the end of your chain, use lower Tape Saturation settings, and provide your entire signal with the tape-like warmth, compression, and added low end harmonics.
Firstly, they are cheaper than their tube counterparts, which is why most beginners will end up starting on a solid-state amp. They are also much more efficient, easier to maintain (no need to change tubes), lighter to carry, and less fragile. While the tone of modern-day solid-state amps can be incredible, they don’t tend to be as fluid or responsive as tube amps. For more on solid-state amps, check out our dedicated solid-state amp page.

Tony Visconti is also into using ambient mics: "I'm very much a fan of the room sound, too. I always record it if it's a real heavy rock guitar with power chords and crunches and all. I'll go around the room and clap my hands and I say, 'Put the mics there, that's it.' Quite often, I'll turn the room mic towards the studio window, and you'll get a reflection of the guitar sound — not directly facing it, because you're looking for reflections." Although he states in the same interview that he'll try to use a pair of U87s for ambience if possible, he's also mentioned elsewhere using PZM mics as an alternative.
I've used 3 effects applications till now: Amplitube podfarm and guitar rig 5. The best software I found so far is guitar rig the sound it gives is amazing it has some pretty good presets and it has an intuitive interface I recommend trying out demos of every software to see which better suits you. I recommend guitar rig. I would suggest using a PC instead of a laptop because they're processor intensive. Anything that's part of the is series is great (i3 i5 i7). Good luck and remember to get asio4all drivers google it and get the newest drivers
However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."
The vast majority of guitars use more than one pickup, and provide a switch that controls which pickup, or combination of pickups, is active at any one time. This article adds one more pickup to our circuit and shows how we can wire up a selector switch. We look at both toggle and blade style switches. This brings us to the point where we now know how to wire up a Telecaster in the standard way.
Amp modeling is a polarizing topic for some guitarists, but it shouldn't be because the alternative is still widely available. If f you feel that amp modeling will just be a distraction then go for a straightforward amplifier. For those who do appreciate the versatility that they offer, there are now many options on the market, from the usual digital recreations of popular amps, to those with analog based amp voicing approximations.

My first electric was one of these (1962, I was 14) . My mother bought it by mail order, probably from the Bell's catalogue. I remember coming home from school every day for what seemed like weeks hoping it had arrived! It was very crudely made with a plywood body (mine was in a red finish). The neck was wide and flat (think that was ply too!) and the action appalling! I remember the original strings were copper wound and left you with green fingertips! I remember the price was around 14 pounds, quite a lot at the time! Even at that age I wasn't impressed for long and soon traded it in for a Hofner Clubman. Wish I still had it now though!
The Old Standby is another model beloved by generations of harmonica players. Up until the 1990s, this model was a quality instrument made in Germany on a wood comb. Where the Marine Band was the choice of blues players, many country music players such as Charlie McCoy preferred the Old Standby. In the 1990s, Hohner began manufacturing this model in China on a plastic comb with a significant decrease in quality. Among harmonica fans the downgrade remains unpopular.[26]
For most applications, all you really need is a guitar input, and an output that you can plug to an amplifier or PA system. Still, it doesn't hurt to have extra input/output options, like a mic XLR input (for vocalists who play guitar), an aux input (for practicing with your favorite tracks), headphones out (for quiet practice and tweaking), stereo output, and many more.
The previous drawing illustrates the electrical and magnetic function of a single-coil pickup. Some pickups might use six permanent magnets in place of the six pole pieces to create the magnetic field, but the idea is the same: create a steady magnetic field around a coil in proximity to the guitar string. The name "single-coil" pickup becomes more significant when compared to the humbucker or "dual-coil" pickup.
So, here's the story I heard from the guys in this shop, one of whom claims to have met Trev at NAMM. He said Fender (and maybe Gibson?) owe him a bunch of money for custom parts and design fees and whatnot, so he started the Vintage line as a sort of f*** you to them. Don't know if it's true but they're so much like a real tele I could see him getting sued, assuming they're not afraid of him countersuing for unpaid invoices. Who knows, maybe it was all a sales ploy. In any case all the sales pitch I needed was playing one. Plays as nice as my MIM Deluxe for half the price.

Straight out of the box, you have 6 x enhanced amp voices to choose from ranging from crystal cleans to bone crushing gains to get to grips with as well as 12 x super wide stereo FX effects that you can use to create your ideal sound. The 10 watts pumping out of the 2 x 3” woofers make it a great desktop amp and something to jam along with friends. The amp is ideal for beginners still getting to grips with their sound as you can choose from Clean Warm, Clean Bright, Crunch, Super Crunch, OD 1 and OD and the budget friendly price tag makes it all the more appealing. This software is a free download that functions as an editor/librarian for your Spider tones. In addition, you also get Presonus Studio One DAW bundled with the amp so you can record loops, craft entire songs, change and store patches using the Blackstar INSIDER software. This is not only one of the best cheap amplifiers, it’s also one of the best amps for beginner guitarists who want to get into signwriting too!
1Note that no signal processing is instantaneous, so every effect adds some small delay. For digital effects, this is the measurable and sometimes notable latency of something millisecond-ish (hopefully not more than a few ms). In simple analogue effects like distortion it's at most in the nanosecond range and basically neglectable. Any equaliser/filter component also introduce phase delay, which can be interpreted as delaying various frequencies by different amounts; but this too is normally not noticeable and works quite differently from a digital delay.
Electric guitars are solid-bodied guitars that are designed to be plugged into an amplifier. The electric guitar when amplified produces a sound that is metallic with a lengthy decay. The shape of an electric guitar is not determined by the need for a deep resonating body and this had led to the development of contoured and thin bodied electric guitars. The two most popular designs are the Fender Stratocaster and the Gibson Les Paul.

The use of overdrive distortion as a musical effect probably originated with electric guitar amplifiers, where the less pleasant upper harmonics created by overdriving the amp are filtered out by the limited frequency response of the speaker. If you use a distortion plug-in without following it up with low-pass filtering (or a speaker simulator) in this way, you may hear a lot of raspy high-end that isn't musically useful. This is why electric guitar DI'd via a fuzz box or distortion pedal sounds thin and buzzy unless further processed to remove these high frequencies.
The only known American distributor of Lyle guitars is the L.D. Heater Music Company. A small warehouse based in Beaverton, Oregon, L.D. Heater was owned by Norlin, the parent company of Gibson, and known more for their exclusive production rights to Alembic instruments. As protection from potential lawsuits, Lyle guitars were part of the contract that stated under which brand names Gibson-licensed guitars could be produced and distributed.
Capacitors (often referred to as "caps") have several uses in electric guitars, the most common of which is in the tone control, where it combines with the potentiometer to form a low-pass filter, shorting all frequencies above the adjustable cut-off frequency to ground.[12][13] Another common use is a small capacitor in parallel with the volume control, to prevent the loss of higher frequencies as the volume pot is turned down. This capacitor is commonly known as "treble bleed cap" and is sometimes accompanied by a series or parallel resistor to limit the amount of treble being retained and match it to the pot's taper.[14]
While all of the aforementioned stomp boxes (pitch shifter, envelope follower, wah pedal, compressor and overdrive/distortion) should be plugged into the amp’s input, modulation effects can be connected to an amp’s effects loop instead of into its input. Again, this is a matter of taste. Some guitarists prefer the more “pristine” sound quality of modulation effects patched into an effects loop, particularly since this setup can help reduce overall noise.
We can visualize the operation of a potentiometer from the drawing above. Imagine a resistive track connected from terminal 1 to 3 of the pot. Terminal 2 is connected to a wiper that sweeps along the resistive track when the potentiometer shaft is rotated from 0° to 300°. This changes the resistance from terminals 1 to 2 and 2 to 3 simultaneously, while the resistance from terminal 1 to 3 remains the same. As the resistance from terminal 1 to 2 increases, the resistance from terminal 2 to 3 decreases, and vice-versa.
There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."

The Seismic Audio SADIYG-15 JEM Style Electric Guitar Kit gives you the ultimate shredder guitar. Originally designed by Steve Vai, this style is built for speed. Innovative features like a Monkey Grip Handle and Floyd Rose Tremolo complete the unique design. All the parts needed for a finished guitar are included. This guitar kit is suitable for the aspiring or established luthier and all guitar players. A truss rod adjustment hex wrench, two Floyd Rose tremolo adjustment hex wrenches and solder are included. You will need a phillips head screwdriver and a soldering iron to fully assemble the guitar. A pack of six nickel alloy strings and a right-angle guitar cable are also included.With your purchase, you will receive one DIY JEM Style Electric Guitar Kit pictured and described above.


The shadows are his home and keeping Gotham's citizens safe is his sustenance. Darkness envelops his every move and his legend lives in the whispers of each passerby. Known by many names — the Caped Crusader, the Dark Knight, Batman — this man lives to protect. But by pitting himself against the criminals of a city, he has only made his laundry list of powerful enemies grow. One after another, a new and nefarious threat has risen up and one after another Batman succeeded in bringing them down. But what happens when those menacing masterminds join forces? Who will rescue Gotham when a deadly roster of depraved lunatics gangs up on the shadowed warrior? Who will save us all? The finale to the legendary Arkham series explodes onto your screen in the most adrenaline-pumping storyline yet. The Scarecrow has returned to Gotham City and he has united a terrifying team of super villains, including Penguin, Two-Face and Harley Quinn. For the first time in the franchise, you get to step behind the wheel of the iconic Batmobile as you harness the power of Batman and scramble to outwit the wicked gang after your blood. Tear through the streets and soar across the skyline in heart-pounding gameplay that will suck you in and force you to ask yourself if you have what it takes to save Gotham. Do you have it within you to be the hero the city needs? Or will the villains of Gotham overtake the Dark Knight once and for all?
In the 2010s, virtually all of the sound reaching the audience in large venues comes from the PA system or sound reinforcement system, the huge speaker systems pointed at the audience. As well, in the 2010s on-stage instrument amplifiers are more likely to be kept at a low volume, because when band members have their onstage amps "cranked" to high volume levels on stage, this makes it harder for the audio engineer to control the sound mix and blend. For example, if a heavy metal bassist had two 8x10" cabinets and several 1x18" subwoofer cabinets and several thousand watts of bass amplifier heads, and these amps are set to a very high volume level, this bass player will be creating very significant onstage bass volume. If the sound engineer wished to turn down the bass in the PA/sound reinforcement system, this bassist's loud onstage volume would make it hard for this engineer to control and/or reduce the volume of bass in the FOH (Front of House) sound mix. Another issue that can develop with bass players who have very high onstage volume is that it can be hard for the audio engineer to produce a clean sound through the PA/sound reinforcement system. For example, if a bassist was driving her bass amp speaker stacks into clipping to create a fuzz bass tone, if the audio engineer wished to have a "clean" bass sound, this could pose a challenge.
Six-point rocking tremolo: This was the original rocking vibrato designed by Fender in the 1950s. Like the two-point tremolo, it is through-body, spring-loaded, and provides individual string intonation and height adjustment. Some players feel that because this type of tremolo rocks on six screws it provides greater vibration transfer to the top and hence better resonance.
Pickguards were white pearloid, or sometimes tortoiseshell, the neck used a string tree, and the all-around makeup of the guitar was bigger than later iterations — thicker necks, bigger and heavier bodies, larger fret markers. One obvious differentiator is the logo on the headstock; the earlier models, and even a few released as they moved into Phase Two, had a raised plastic “Univox” logo on the headstock.
There are two main types of controls on bass amps: switches and rotary knobs. The simplest, least expensive practice amps and combo amps may only have a few switches and knobs, such as an "on/off" switch, a volume knob, and a bass and treble control knob. Mid-priced models may add additional tone controls (e.g., one, two or three "midrange" controls and a "presence" knob for very high frequencies) and/or add a second type of volume knob called a "gain", "preamplifier" (or "preamp"/"pre"), or "drive" (short for "overdrive") control. A good selection of equalizer knobs and gain stages is standard on expensive amplifiers. If an amp has one or more preamp or gain knobs, the second volume knob may be called "master", "volume" or "post".

This is one of the most popular and oldest brands of acoustic guitars available in India. There are various brands and models of guitar available under the umbrella of Gibson Guitar Corporation. ES-335, SG, Flying V, and Firebird are one of the most iconic models of guitars produced by this brand and their classic acoustics include the hummingbird. These are ideal guitars that can be used by beginners made in – the USA. The price of Gibson 6-string guitars starts from 4,000 INR approximately.
Gold Coverage goes above and beyond the manufacturer's warranty to protect your gear from unexpected breakdowns, accidental damage from handling and failures. This plan covers your product for one, two, three or up to five years from your date of purchase, costs just pennies per day and gives you a complete "no-worry" solution for protecting your investment.
The electric guitar is a staple in the music industry. Over the last several decades, the use of the best electric guitar has evolved across many music genres. The electric guitar has made grand entrances in the likes of Rock, Pop, Hip Hop, and more. Today, it is considered one of the most essential instruments in pushing musical creativity forward. Whether you are a beginner or an expert electric guitar player, the variety of sounds and distinct musical styles will surely take any music genius to the next level. We’ve reviewed electric guitars & compiled a guide on how you can best spend your money on the perfect electric guitar.
Like Ibanez, Jackson is known for targeting the metal crowd. They have a variety of instruments available from affordable lower-cost guitars to high-end pro/enthusiast guitars. Jackson likes to keep their designs unique. Think of an 80s metal band and what they might be playing. If you thought of pointy guitars with sharp angles, Jackson might be what you’re looking for. Jackson not only sounds metal, it looks metal too. The Jackson King V, for example, is a staple instrument. If you know who Dave Mustaine is, you’ve heard of Megadeth. Because he was a co-founder and its guitarist. He is one of the people who made the Jackson King V as famous as it is. However, the design can be a bit too over the top for some people. Not everyone wants their guitar to be as “loud” as the sound it produces.
Official Vintage Guitar Price Guide: This print guide, published by Vintage Guitar and Bass, is an annual guide that is re-published with updated information each year. The webpage above is handy because it shows links for all guides that have been published in one place and will continue adding links for future years. The link shown for each guide will take you to a store online where you can purchase the guide. It is known for being extremely thorough, and its latest edition, the 2017 guide, has appraisals for 2,000 brands of guitars, basses, amps, effects, mandolins, steels, lap steels, ukuleles and banjos.
I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.
As I look at all the guitars you fellows have its a pleasure to see so many . to bad I live to far to visit Indianapolis IN .I have a 3/4 Stella that is about 69 years old that I got when I was about ...4 years old . Uncle John Hinson gave it to me for Christmas and I played the heck out of it. At about 12 years old I played in a theater here and was called Mevis Fresley . Rock and Roll and Country . So much fun I had for about a year then Momma and Dad said I had to quit as I was getting to popular, Oh well it was fun while it lasted.. Haven't met Pat Stockdale in person but that child can play a pretty Guitar. Good luck to you all Betty McLevey See More
The body of an acoustic guitar is composed of the top, also called the soundboard. The soundboard is supported by internal bracing; the sides, and the back that together form a hollow chamber. The upper body curves are referred to as the upper bout, while the usually larger lower body curves are called the lower bout. The area between them is referred to as the waist.
With that in mind, we would like to preface this article with the statement that a certain body style doesn’t necessarily mean that the guitar will be a good fit for the genre it’s associated with. However, we have also included some info on pickups. With knowledge on how the combination of pickups and a guitar’s body style impacts your end tone you should be ready to start shopping!
A functionally solid-body electric guitar was designed and built in 1940 by Les Paul from an Epiphone acoustic archtop. His "log guitar" (so called because it consisted of a simple 4x4 wood post with a neck attached to it and homemade pickups and hardware, with two detachable Epiphone hollow-body halves attached to the sides for appearance only) shares nothing in design or hardware with the solid-body Gibson Les Paul introduced in 1952. However, the feedback associated with hollow-bodied electric guitars was understood long before Paul's "log" was created in 1940; Gage Brewer's Ro-Pat-In of 1932 had a top so heavily reinforced that it essentially functioned as a solid-body instrument.[2] In 1945, Richard D. Bourgerie made an electric guitar pickup and amplifier for professional guitar player George Barnes. Bourgerie worked through World War II at Howard Radio Company, making electronic equipment for the American military. Barnes showed the result to Les Paul, who then arranged for Bourgerie to have one made for him.
×