Slot Peghead vs. Solid Peghead (steel string models): Most models converted from a 12 fret slot peghead to a 14 fret solid peghead around 1934 (except the OM series, which went 14 fret in 1929/1930 and the style 17 and 18 models which were available in 14 fret style in 1932). Basically if the guitar has a 14 fret neck, it will have a solid peghead. If it has a 12 fret neck, it will have a slot peghead. Note there were some post-WW2 gut string and classical models (i.e. 0-16NY) and some post-WW2 special order steel string guitars (i.e. 1967-1993 D-18S) which always have a slotted peghead.
"Bring up one mic at a time and get it to optimum level on your board. To check that they're all in phase, make sure the signal is adding and not subtracting as you add in the other mics. If not... reverse the phase. Then start to put up each mic, one at a time... as you move the faders back and forth, you'll hear the greatest EQ, because of the phase relationship... Then if you flip the phase on one of the mics, you can really have some fun — it'll act like a filter."

Most beginners find that during the process of learning (after a year or so) you will figure out your own sound. You will naturally be drawn to music that features guitar in it, and great guitar parts. So what usually happens is that your own musical tastes will change and with this change the type of instrument that suits your sound the best will also change. So when you’re ready to take the next step, you will have a much better idea of what you really want.

{"eVar4":"used: guitars","eVar5":"used: guitars: electric guitars","pageName":"[gc] used: guitars: electric guitars: raven","reportSuiteIds":"guitarcenterprod","eVar3":"used","prop18":"skucondition|0||creationdate|1","prop2":"[gc] used: guitars: electric guitars","prop1":"[gc] used: guitars","prop17":"sort by","evar51":"default: united states","prop10":"condition","prop11":"used","prop5":"[gc] used: guitars: electric guitars","prop6":"[gc] used: guitars: electric guitars","prop3":"[gc] used: guitars: electric guitars","prop4":"[gc] used: guitars: electric guitars","channel":"[gc] used","linkInternalFilters":"javascript:,","prop7":"[gc] used"}
A switch is a device that segments networks into different subnets. Segmenting the network into different subnets keeps one network from overloading with traffic. Therefore, a switch forwards all data in the data layer and sometimes the network layer as it filters the data. A switch allows a connection to be established and it terminates a connection when there is no longer a session to support. Prior to switches there were hubs. Hubs also connected multiple independent (connected) modules in a network, but they were not as efficient as switches. Since most switches work in Layer 2, and not in Layer 1 like a hub, they are better at filtering data. A switch looks for Ethernet MAC addresses, keeps a table (the bridge forwarding table) of these addresses, and navigates the switch between ports. The switch prevents collisions and gives full bandwidth to each connection at the switch port. Switches save bandwidth by only sending traffic to destinations that have traffic. When a switch switches Ethernet frames, they monitor the traffic for the response from that frame and see what device, on what port, responds to that flooded frame. There are different types of switches that range from "dumb" switches that lack manageability and can monitor only 4-8 ports to "managed" switches that can get statistics on switch traffic, monitor connections, and hard-code up to 96 port speeds and duplex. Then again, there are "chassis-based" switches with blades or cards that perform not just switching, but routing and intrusion detection too! If you are interested in this, look into Cisco's Catalyst 6500 Series. Another type of switch preferred by large enterprises is the "Layer 3 Switch," because it has the functionality of a router .
Rickenbacker is another famous American brand created in 1931 to build Hawaiian guitars, called "Frying pans" due to their typical shape. The brand incorporated guitars to its catalog a bit later. The models created by Roger Rossmeisl (Combo 4000 guitar, 4000 bass), a former Gibson collaborator and future Fender man in the 1950's, enjoyed a lot of success and became the brand's most typical designs. The 360, 370, 620, 660, and 4003 models can be connected to a Rick-O-Sound unit (a box with two mono outs) via a stereo 1/4" jack, which allows the two or three pickups to feed different amps. Most instruments have a dual truss rod and a varnished rosewood fretboard. Their distinctive jangle and chime emphasizes high frequencies, giving pretty good results with clean sounds. The Beatles, and especially John Lennon, often played Rickenbacker guitars at the dawn of their careers. Tom Petty, The Jam and R.E.M. are also Rickebacker users.
Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: 3-Color Sunburst
Now as for flipping the whole bridge, yes, in some cases this may help you. Try it out and see what happens. Just an extra mm or two could make all the difference. One thing to watch out for, though. The notches on your saddles might not all be the same. Often you will have wider notches for the wound strings and thinner notches for the unwound strings. So you might have to swap these all around.
One and a half steps down. Famously used by Black Sabbath's Tony Iommi in the 1970s, as well as Carrie Brownstein, Dimebag Darrell of Pantera, Eyehategod, Architects, Dying Fetus, Anata, Corin Tucker of Sleater-Kinney, Between the Buried and Me, Machine Head (tuned 40 cents sharp), Down, All That Remains, Bolt Thrower, Pete Loeffler of Chevelle (on Wonder What's Next), Billy Howerdel of A Perfect Circle and Ashes Divide, Wes Borland of Limp Bizkit, Guns N' Roses (on "Jumpin' Jack Flash" and "I Don't Care About You"), Slayer (on "Gemini" from Undisputed Attitude, Diabolus In Musica, the majority of God Hates Us All as well as "Cult" and "Black Serenade" from Christ Illusion), and Stone Sour, as well as former guitarist Jim Root's other band Slipknot on the song "Snuff". Also used by Kyuss on the Sons of Kyuss EP and on the songs "Isolation", "Big Bikes" and "Stage III" from Wretch. Used by Metallica on the song "Bad Seed" from the album Reload, by blink-182 in "Obvious". Also used on Considered Dead and The Erosion of Sanity by Canadian technical death metal band Gorguts.
It’s not known how long this A group lasted – probably only a couple more years, except for the U-65RN. By ’76, the U-65RN was still around, now promoted with 17 watts, Hammond reverb, tremolo, 10 transistors, and a 12″ heavy duty speaker. This looked pretty much the same, except the logo was reversed in white out of a black metal strip above the grille and the power switch had changed. At some point, the U-65RN was joined by the UB-252 bass amp, offering 20 watts with a 15″ speaker, presumably similar and transistor. These are the only two Univox amps listed in a 1979 price list (contained in the 1980 book), though, as you see over and over, others may still have been available.
What makes it truly stand out is the infinite Reverb this pedal provides. If you’re looking to get an all-around “stomp-box” featuring everything you ever wanted with remarkable sound output, this work of art by EH is designed to make you never think about getting another Reverb pedal. It can fit in any form of setup, and it is destined to conquer your flavor.
There was a band in Manchester called Sister Ray, who were just this scary bunch of men/reprobates. I guess word had got around that I had a knack and was a useful little guy to have around, and you only have to buy me some Coca-Cola and I was good to go. So I played with them. I started playing my first sort of shows in front of real [crowds] when I was fourteen.
Now imagine the puddle again, but this time imagine some wood blocks (12 inch long 2x4's for those of you with rusty imaginations) that are placed on their sides in the puddle in the shape of a three-sided box with the open side facing the pebble's point of impact. The radiating lines go in to the box and bounce back or reflect off the walls. Soon, there are so many lines radiating around in that imaginary box that they all collide with each other and become a random, jumbled mess. Eventually, the size of the lines and the number of them diminish. That my friends is reverb.
Standard tuning but with the 6th string lowered two whole steps. Used by Alter Bridge on the song "My Champion" (tuned down a half-step) as well as Sevendust on the song "Mountain" (tuned down one and a half steps). Also used by John Mayer on the song “Neon”, and by Chino Moreno of Deftones on some songs such as "Swerve City" and "Hearts/Wires", tuned down a full step.
Hopefully, this list of easy guitar riffs has provided you with some ideas of memorable riffs you can learn as a beginner or intermediate player. The great thing is, there are tons of resources out there to help you learn all of these songs. Depending on which medium you prefer to learn from (written, audio, or video) links to each are included above for all songs.

Combo amplifiers are the most popular type of guitar amplification these days. While amp heads are the source of incredible power, it is the versatility, convenience and simplicity of combos that makes them the go-to choice for so many – from beginner to seasoned pro. Combos come in a variety of flavors in all price ranges. While the practice amp and budget markets are awash with combos, there are also some epic premium models such as the Fender ’65 Princeton Reverb, which is a revamp of one of the most epic tube combo amps ever made. .

If you’re new to the world of guitar or bass, a looper pedal is a great way to hone your skills. A looper pedal is not an effect, but more a tool that allows you to record chord progressions, notes or riffs and then play it back through your amp. It’s ideal for playing a chord progression or rhythm section, looping it and then playing a lead line or riff over the top – like two guitars playing together.

Best acoustic I've owned. It's an Oregon dreadnought, an all round stunning looking guitar. The sound is beautifully balanced, clear with nice defined bass, sits perfectly in the midrange and projects well without being too bright. It's light weight with meticulous craftsmanship and beautiful timber. When you look at these guitar it's obvious that they are built with a lot of care and attention to detail.
What about Derek Trucks? Mark Knopfler? Trey Anastacio? Chuck Berry? Even Eddie Van Halen deserves some credit–more than John Mayer does for guitar playing. John Mayer's fame as a guitarist piggybacks on his commercial success, which is a result of targeting a demographic of 13 year old girls. He's no doubt a skilled guitar player, but over-rated as a guitarist relative to guys like Van Halen, Knopfler, etc.
Berry snapped one up immediately in 1958 and has played the ES-335 or its slightly fancier relatives the ES-345 and ES-355 since then. A few years later the model was embraced by Freddie King. Alvin Lee made history with an ES-345 at Woodstock, speeding through “I’m Going Home,” and Larry Carlton’s incredibly lyrical ES-335 can be heard on great Steely Dan albums including The Royal Scam and near-countless other sessions. Whether equipped with humbuckers or P-90s, semi-hollow body guitars sound sweetly beautiful, but can also grind. Ultimately, however, they remain a middle ground between the electric solid body and the hollow body models.
I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.
Pedals of this template offer a sound that’s considered “natural,” “warm” and “tubey” partly by achieving smooth, symmetrical clipping, and partly by reining in harsher high harmonics that can result in sounds that are heard as jagged and spikey in other pedals. The truth is, opamps really don’t clip in the same way that tubes do, but they are manipulated in these designs to simulate a generally “tube-like” sound. Other early overdrive pedals were designed around discrete transistorized clipping and boosting circuits, though many leaned toward distortion units as properly defined, and added more artificiality to the sound—hence the Tube Screamers’ near-instant popularity when it was introduced.
Now, there are some basic terms in the electric guitar lingo that you need to be aware of. Below are some of the terms that you need to know before you go out and research about different electric guitars. But if you are musically inept, there are some ways you can compete with the guitar guy. If you learn some points about the electric guitar, such as terms and mechanics of the instrument, you can impress your friends and possibly even will be the guy holding the guitar at your next dinner party.
Well, that’s not exactly what he said. Although, it would seem that way, if you take time to browse the company's Facebook photos. Every guitar the company makes is truly enticing and a work of art. Moreover, the quality of each instrument is astoundingly good. Take the Xuul Katan VI. While the guitar is certainly unique, it also boasts a strong specs list:
Simple and great idea! Ordered it from StewMac and received it in the mail two days later. Mounted it on my Taylor acoustic instantly and played for hours! Haven't put it on an electric yet but have every bit of confidence that it'll work like a charm there as well! Very handy piece to have in your studio....quickly turn any guitar into a slide-playing machine!
If you do want to use single pedals then BOSS compact pedals come with a buffer circuit that converts your high impedance input into a low impedance output. For a more detailed discussion on the topic of single pedal buffers check out Steve Henderson’s excellent article here:

For example, bass guitar frequencies are on the relatively low end of the tonal spectrum. However, plucking a bass string can create a sudden, short burst of high and mid-frequency sounds. You need your bass amp to be loud enough to make those low-frequency sounds strong and audible in the mix, but you don’t want to flatten your band mates or blow out your speakers by sudden pops of high-frequency sounds.
The Supro aluminum Hawaiian lap steel was similar to Beauchamp/Electro’s “frying pan,” with a round body and guitar-like neck, very similar to the Rick, but with the top carved away to allow a little more access. Given the close nature of the L.A. guitar world, it’s entirely possible that all these aluminum guitars were cast at the same place. The head was three-and-three with a single cutout in the middle. The Supro had dot inlays on the fingerboard, with an alternating two/one pattern and four dots at the octave. A rectangular Supro logo plate sat between the pickup cover and the fingerboard. The pickup – the single-coil version of the Stimson design – was mounted under a raised cover (part of the casting) with a slit to reveal the bar polepieces. It had one volume knob on the treble side and was housed in small form-fit hardshell case. This was closest to Beauchamp’s patented electro guitar design, making the Supro brand a direct descendent of George Beauchamp. An important point to remember is that these cast aluminum guitars were made in Los Angeles.
For practice, tone, playback and recording the Cube series is hard to beat. Integrates with iDevices for playing along with music and gives you all the effects and amp sounds you need in one place. The Roland CUBE-10GX Guitar Amplifier Combo is super lightweight and compact making it a great practice amp for home or studio use. If you're in need of a bass amp, the Roland Cube 20XL Bass Guitar Amplifier is a great solution too.
You might have previously dropped your jaw at another stunning performance taken from the same session in 2015 wherein Swift delivered a breathtaking piano rendition of "Out Of The Woods," and honestly, I can't help but feel that this is Swift in her natural element (probably thanks to her country music roots) and I want more of just her, her magnificent voice, and an instrument.
With the die-cast chrome tuners, you get to ensure that your guitar never gets out of tune. The natural finish and large pickguard make this instrument a true classic. You can play this acoustic instrument as it is, or plug it into a PA and let the System 53 piezo pickup amplify its sound. You also get a preamp with 2-band EQ for more control over the tone and volume.
Fender is a guitar pioneer. Its history of making quality guitars stretches back decades. The Fender Modern Player Telecaster Thinline Deluxe is another classic by Fender. This guitar offers both sweet and aggressive tones thanks to its two MP-90 pickups. With its 9.5-inch radius, this guitar is incredibly comfortable to play. There are 22 medium-sized frets and a six-saddle hard-tail bridge. This guitar is easy to tune and stays in tune.

While anything with decent gain could be used for metal, a dedicated metal amp is the only thing a dedicated metalhead would want to use. These amps are actually very similar to other styles of amp, with one big difference – they are loaded with massive gain, which is essential for metal. A perfect example of what makes a great metal amp is the EVH 5150III. Designed with Eddie Van Halen, this all-tube amp head is an absolute beast in term of power and gain, with face-melting distortion and 50 watts of power.
By the way, the Dobro Hawaiian lap steel shown in Gruhn/Carter, with volume and tone and the rectangular string attachment, is a slightly later version probably from early to late ’35. Volume controls were added to these electrics early on, but tone controls and adjustable height pickups weren’t introduced until early in ’35, although tone controls don’t appear on Supro guitars until ’38.
To preserve the clarity of the tone, it is most common to put compression, wah and overdrive pedals at the start of the chain; modulation (chorus, flanger, phase shifter) in the middle; and time-based units (delay/echo, reverb) at the end. When using many effects, unwanted noise and hum can be introduced into the sound. Some performers use a noise gate pedal at the end of a chain to reduce unwanted noise and hum introduced by overdrive units or vintage gear.[12]
This page is a work in progress and as new information is revealed it will be added to the list. But I can't do this alone, folks. See a guitar not listed? Tell me! Listed below are the major manufacturers, known badges and suspected badges to the best of my knowledge in written and list form to make it easy to find out WHO MADE YOUR GUITAR! In some cases I won't know because the badge you have may be extremely rare and virtually unknown to even seasoned collectors.
Even now i make people custom guitars and have made a few for people in MO/IL a total of 23 made and they all love them and say they are the best guitars theyve played cause i work side by side to shape the guitars necks and bodys to fit most comfortably with them but i charge $2500-3000 for a guitar which is still cheaper than the big name guitar places
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring
I've been an on/off guitar player for at least 15 years now. Never really good, but steadily improving. My hardest thing is consistent motivation. I go through spurts where I study theory and practice like crazy and then, suddenly I just stop. I got this both because I was exceited about it's teaching potential (lessions were $20/30 min when I was a kid, got this for $25) and it has got me playing again and is a lot of fun.
Before recording commences, make sure that all of your equipment is in good shape and not producing crackles, hums and buzzes. If you are having problems, they can often be dealt with by using noise-filtering units such as gates and expanders. These are best used before post-recording effects – compression and reverb, for example – are applied, as a compressor will emphasise noise, while a gate might chop off the natural tail of the reverb.

When speaking of electric guitars and pickups we are usually talking about magnetic pickups, as they use magnets to convert the vibration of the string into an electric signal, and these can be divided into 2 main types: The Humbucker (Double-coil) and the single coil pickup. Double-coil pickups are basically single coil pickups mounted side by side and the sound they pick up is "integrated" through to the output.
If you feel you’re ready for a new and better axe or are keen on starting your musical journey with an awesome electric guitar, check out the models we’ve reviewed below. All of these electric guitars have become fast favorites since they were released to the music-loving public. We’re sure you’ll find one or two that would meet all of your requirements and fit your budget.

{ "thumbImageID": "Limited-Edition-Les-Paul-PlusTop-PRO-Electric-Guitar-Desert-Burst/H79036000003000", "defaultDisplayName": "Epiphone Limited Edition Les Paul PlusTop PRO Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Desert Burst", "sku": "sku:site51321473136628", "price": "604.99", "regularPrice": "604.99", "msrpPrice": "882.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-PlusTop-PRO-Electric-Guitar-Desert-Burst-1321473136628.gc", "skuImageId": "Limited-Edition-Les-Paul-PlusTop-PRO-Electric-Guitar-Desert-Burst/H79036000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Natural", "sku": "sku:site51321473136398", "price": "529.00", "regularPrice": "529.00", "msrpPrice": "882.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-Les-Paul-PlusTop-PRO-Electric-Guitar-Antique-Natural-1321473136398.gc", "skuImageId": "Limited-Edition-Les-Paul-PlusTop-PRO-Electric-Guitar-Antique-Natural/H79036000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Okay, getting down to brass tax - how do the effects and amp models sound? In a word, great! It’s not secret that Boss makes some fantastic pedals, many that have reached legendary status over the years. It’s nice knowing that you’re getting a multi-effects pedal from a brand that has really dominated the guitar and bass effects field. Boss uses some technology terms like COSM modeling and MDP (Multi-Dimensional Processing) which sound fancy but might not mean much to many guitarists. Truth is, given that this is a digital unit, some things sound really great, and some sound not so great. The overdrives are hit and miss. This user review hits the nail on the head:
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.
Hugh Padgham adopted a similar tactic for recording Andy Summers' Roland JC120 when working with the Police: "The chorus [was] always switched on in order to produce the slightly out-of-tune guitar sound that was all the rage during the early '80s. The amp's two 12-inch speakers would each be close-miked with a Sennheiser MD421, panned left and right — one speaker would produce a straight signal while the other would be chorused, and these would sometimes be double-tracked the other way around in order to produce an especially wide stereo picture."
About a year ago (or maybe more) I was in a real Marc Bolan/T Rex phase, and I came across a Lotus Les Paul copy in my local Sam Ash used for $199. Like the idiot I am, I played it, and it played and sounded good, so I bought it. Well, that did not sit well with my folks, who made me take it back a few days later. It had a bolt-on neck and was quite heavy, but other than that, it looked sweet. I even was smart enough to take a picture of it:
{ "thumbImageID": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "defaultDisplayName": "Fender American Professional Precision Bass V Maple Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51500000030634", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Black-1500000030634.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Black/J46466000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Olive", "sku": "sku:site51500000030635", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive-1500000030635.gc", "skuImageId": "American-Professional-Precision-Bass-V-Maple-Fingerboard-Antique-Olive/J46466000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Few dispute that, for tonal purity, the best distortion sounds come from cranking up a good tube amp. In particular, those with ears for tonal nuances buried even within a heap of distortion agree that a vintage-style, non-master-volume amp (or good boutique amp with the master up full to effectively take it out of the circuit) driven to the point where the output tubes are beginning to distort offers most players’ dream visions of the perfect overdrive tone. 

You have so many effects on this that you’ll find it difficult to get bored, all of which have been modelled on some of the most iconic sounds in effects pedal history including Boss, Line 6, Electro Harmonix, Z Vex and more. You have a huge amount of distortions, delays, reverbs, modulations, pitch/synth/filters, compressors/limiters, EQs, wahs, and even a looper to sculpt your sound with, all of which have been meticulously modelled to include the subtlest qualities and sound abnormalities that made these effects and their respective pedals so revered.

Here's my attempt to catalog those songs. Note that these are not necessarily my personal favorites by each artist, although I think all of them are at least pretty good. I tried to stick to at least "acoustic-friendly" songs. They range from incredibly simple to fairly complicated, but nothing is near-impossible. I omitted several popular piano tunes that would be easy to learn on guitar. Also note that many if not most of these are intended to be sung simultaneously for full effect. And finally, yes, the songs are in alphabetical order because I thought of most by scrolling down my iTunes list
{ "name": "Candy Apple Red", "skuUrl": "/Fender/California-Redondo-Player-Acoustic-Electric-Guitar-Candy-Apple-Red-1500000152032.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "09-22-2018", "price": 399.99, "isOnSale": false, "msrp": 400.01, "salePrice": 399.99, "easyPayOptions":"0,0,100002,6 Months Promotional Financing,01/01/2019,Special 6-month financing^ + $19 back in rewards Valid through,399.99,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "399", "decimalValue": "99", "listPrice": 399.99, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 0.02, "discountPercentage": 0, "promos":["coverageEligible","freeShipping","return"], "warranty": true, "sku": "site51500000152032", "shipToStore": true, "displaySku": "K47863000002000", "displayId": "1500000152032   POS #: 113861041", "serialized": false, "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/K47863000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "California Redondo Player Acoustic-Electric Guitar Candy Apple Red", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": false, "checksum":"352089750023", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
Mod® Kits are designed to give both novice and experienced musicians the opportunity to build their own amps and effects pedals. All kits come with easy to follow instructions and use point to point wiring. Pre-drilled enclosure and all parts are included. All you need to provide are hand tools, a soldering iron and solder. All of our kits have a build difficulty rating to help you determine which kit is right for you.
Anyways, it sucks to not have a camera to show stuff or even a way to measure stuff I'm describing. I'll have to obtain a few small things to set it up. like a saddle and an allen wrench that doesn't suck. Probably whatever caliper or shim they use to do real setups as well. Maybe latter frames just have tilted bridges after a while. I don't really know. The bridge is rather thick. If you lower the bridge, do you just sand it?
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
For a very good price, you get a solid spruce top, mahogany back and sides, and a rosewood fingerboard with matching bridge - for elegant finger picking. The bracing on the inside of the body is scalloped for even better tone, which works very nicely indeed. There’s also a System 66 preamp system with 3-band EQ and a builtin tuner for precision. It’s all good quality, mid-range equipment making this a really great value proposition.
With the advent of belly bridges in 1931, Martin started to compensate their saddle placement. What this does is make for better string intonation. However early pyramid bridge have straight saddles, mounted 1/8" back from the front edge of the bridge. (with the center of the pin holes 3/8" from the back of the saddle.) The 1931 to 1933 belly bridges have a compensated saddle placed 1/8" from the front of the bridge on the treble side, and 3/16" from the bass side. Then on belly bridges in the mid 1930s Martin moved the bass end of the saddle back to 1/4" from the front of the bridge.
So few 1958-1960 Explorers were ever made that sightings of these are rarer still. The most notable, however, is likely the ’58 acquired by Eric Clapton during a U.S. tour in 1974 from Alex Music in NYC. I saw Clapton during the 461 Ocean Blvd. tour of 1974 at the West Palm Beach International Raceway. I recall him playing this guitar – he played it for a few cuts before the weather turned bad(there were tornados in the area that day).
Prior to dennis, i had never taken guitar lessons. Always tried to teach myself. I struggled since i had no structure, i would consistantly get lost, which would make me put the guitar down due to frustration. Deciding to hire dennis was a break thru for me, and honestly wish i would have looked into it much sooner. Not only has my skills progressed, which they due weekly at a much faster rate then when i was trying to learn on my own, but my confidence and motivatation has increased greatly. I look forward to meeting with dennis each week and building off of what he taught me the previous week. The amount of patience dennis has is great, and the way he explains different things so that i understand is awsome. Would definetly recommend dennis to anyone, whether they have just purchased their first guitar, or they have tried numerous times to teach themselves, or even if you have alot of the basics down, but looking to take your knowledge and playing to the next level.
A hard-tail guitar bridge anchors the strings at or directly behind the bridge and is fastened securely to the top of the instrument.[20] These are common on carved-top guitars, such as the Gibson Les Paul and the Paul Reed Smith models, and on slab-body guitars, such as the Music Man Albert Lee and Fender guitars that are not equipped with a vibrato arm.
Johnny was a strange case, a rock and roll outsider who was obsessed with uniformity. And that obsession helped forge the Ramones aesthetic: the identikit leather jackets and ripped jeans worn by each band member, the single surname shared by all four (in the absence of any actual familial kinship) and the terse pacing of the music itself, with not a single excessive note or lyrical utterance.
Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the rock and roll boom they shifted towards producing standard guitars, both acoustic and electric. In 1956, Rickenbacker introduced two instruments with the “neck through body” construction that was to become a standard feature of many of the company’s products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series.
In 2009, Vox refined the Virage design with the Virage II series of guitars. This series repeated the double and single cutaway bodies of the earlier Virage series, but also included the Series 77 (with double horns emulating the Gibson SG series), the Series 55 (with resemblance to the Gibson Les Paul single cutaway), and the Series 33 (with lower cost fabrication than the 77 and 55 series). The Virage II series features a CoAxe pick-ups which resemble the earlier Three-90 features, but claimed to be lower noise. The one-piece cast MaxConnect bridge of this series is aluminium and provides both a saddle and anchor for the guitar strings.
Phasers like the popular DOD-Phasor 201 are a perfect example of what a solid phaser pedal should sound like. Modern designs allow you to control many aspects of this effect, which makes them pretty versatile and suitable for most genres of music. Guitar players like Van Halen heavily rely on phasers to build their foundation, while some have even become famous due to their use of phasers. Phase shifters are generally very flexible and are among the most utilized modulation effects today.

However, in the October, 2018 issue of Premier Guitar (at least the online edition) Frank Meyers, who runs the website Drowning in Guitars, says the Kent 700s were made by a small factory called Hayashi Mokko. Frank is a true expert in vintage Japanese Guitars, so I am inclined to believe him. This is another important piece of the Kent Guitars story.
That's what I was thinking. Have you seen what those things go for when one does pop up for sale? It's nothing for those to go for close to $10k. That's insane for something non-vintage, but that's just my opinion. It's a bit excessive for what's essentially a two humbucker shredder, even if it is handmade over the course of nine years and the body is a piece of a 12th century Viking ship that's been soaked in mead for six centuries and aged to exquisiteness or whatever the fuck. I blame Misha Mansoor. He's got a bunch of guitar nerds all fucked up in the head now.
Now that we have laid down the foundation and discussed the basics of electric guitars, it's time to check out some of the best models on the market. Keep in mind that a definition of a 'best guitar' is highly dependent on the person you are talking to. With that said, we feel that our selection is fairly neutral and highly informed, and fits most norms out there. Let's dig in.
The 5968 written on the label is a model number, not a serial number. It seems that the labels were void of serial numbers rather than model numbers (the opposite of what I had originally suspected). The Dorado I'm working on is constructed of rosewood while the Model 5969 is Mahogany. The 5969 is identicle in size to the 5968 but had nickel plated tuners and a satin finish. From my quick look around the auction business, it appears that the Mahogany back and sides model brings about $150 less than the Rosewood model.
Alongside the Stratocaster, Les Pauls have defined rock ’n’ roll. Everyone from Jimmy Page to Slash to Zakk Wylde has wielded one of these, and the guitar’s fat, creamy tone with near-endless sustain is instantly recognizable. Not everyone can afford a bona fide Gibson, though, but the Epiphone Les Paul Standard makes those sounds accessible to most of us.
This Ibanez has a flamed sycamore top, and delivers a well balanced sound unplugged or plugged in. It has a great finish that is referred to as vintage violin. Owners of this guitar say it sounds great as the similarly priced Seagulls and Yamahas. The price has recently dropped on this guitar, which was a pain point for many owners. At $250 it’s a steal given the quality. The onboard pre amp contains a tuner, which is nice for beginners to always stay in tune. The slim neck will also make for great playability. Click here for more pictures and details.
For instance, during 1970s and early 1980s, Japanese manufacturer Tokai Gakki produced superb replicas of 1957–59 vintage Les Pauls, and replicas themselves were gradually highly regarded. In the 1980s, to respond to the high demand for vintage models, Gibson itself began to offer a line of “Custom Shop models”, almost accurate reproductions of early Les Paul crafted by the Gibson Guitar Custom Shops.
One of the most important things when choosing your guitar is of course the sound - read the study on electric guitar sounds. It’s best if you’re able to try different guitars out in a music shop, and the staff there will most likely be happy to present you with different options that are good for beginners. There you will also have the chance to see how the different guitars feel to play, and have the opportunity to ask the staff if you have any questions or need any advice.
Flanger effects simulate the studio trick of repeatedly putting your thumb on a tape recorder’s reel for a second and then letting the reel (and music’s pitch) catch back up while a dry (unaffected) signal plays alongside. Flangers usually have a depth setting, which controls the intensity of the effect, and a rate control that adjusts the speed of the cycles.

Reverb is the persistence of sound in a particular space after the original sound is removed. When sound is produced in a space, a large number of echoes build up and then slowly decay as the sound is absorbed by the walls and air, creating reverberation, or reverb. A plate reverb system uses an electromechanical transducer (actuator), similar to the driver in a loudspeaker, to create vibration in a plate of sheet metal. A pickup captures the vibrations as they bounce across the plate, and the result is output as an audio signal. A spring reverb system uses a transducer at one end of a spring and a pickup at the other, similar to those used in plate reverbs, to create and capture vibrations within a metal spring. Guitar amplifiers frequently incorporate spring reverbs due to their compact construction. Spring reverberators were once widely used in semi-professional recording due to their modest cost and small size. Due to quality problems and improved digital reverb units, spring reverberators are declining rapidly in use. Digital reverb units use various signal processing algorithms in order to create the reverb effect. Since reverberation is essentially caused by a very large number of echoes, simple DSPs use multiple feedback delay circuits to create a large, decaying series of echoes that die out over time.
12 Month Financing: For a limited time, purchase $599 or more using the Store Card and pay no interest for 12 months on your entire order if paid in full in 12 months. Interest will be charged to your account from the purchase date if the promotional balance is not paid in full within 12 months. Minimum monthly payments required. Subject to credit approval. Apply now.
Aside from what brands to choose from and finding out the right budget to spend on an amp. Initial search for a guitar amplifier generally leads beginner players on figuring out that there are actually different types of guitar amps in the market. This is where they start to care deeply enough to know which amp sounds better and what will fit their playing the best.

The design, while nothing particularly special, is clean and beautiful, which will help it appeal to most guitarists - the dreadnought acoustic body being one of the favorite parts. Ultimately, just about anyone could pick up this guitar and get what they need out of it, which is why it makes our top pick. We could recommend it to anyone, and when you talk about the price, it becomes even more attractive, because this is a high-end guitar for mid-range money.

It’s provided as-is with no support, but it’s still well worth checking out if you’re on a PC. According to the developers, it was born inside an academic research project about the modelling of electric devices, and then applied to the musical instrument field as an evolution of the techniques available in commercial units. Its most important feature is the high precision of the simulation.
 Everybody needs to start somewhere. However, where you start often decides where you end up. For example, if you buy a bad guitar when you start playing, you are a lot more likely to stop playing, and if it happens, you wouldn't be buying any more guitars. We believe guitar manufacturers have a sort of duty to make and supply reliable guitars for beginners. Guitars at beginners' level are as important as high-end guitars for pro. This is where Smash comes in.

The Uni-Vibe was released in 1968 and became an immediate favorite of Jimi Hendrix, David Gilmour, and Robin Trower. It is actually a phase shifting effect, but what makes it groundbreaking is its use of an LFO (low frequency oscillator) to create the sweeping effect. It also uses a photocell to control the speed of the sweeping effect. That is basically a little light bulb inside the unit that will pulse at whatever speed the rate knob is set to. Also the brighter the pulse of the bulb the more dramatic the effect.

Hi - I am looking for a new amp for small to medium venues. I quite fancied the Marshall Mini Silver Jubilee combo, but then noticed several companies selling JVM 50 watt combos in the same price range. It seems that the JVM's are a Swiss Army knife whereas the MSJ seems to be capturing a small version of a classic amp and is more of a one trick pony . Any way you could help me make the right decision. On the other hand , how reliable are the JVM's considering their sophistication?
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
Gretsch was founded in 1883 and started out making banjos - it wasn't until the 1930s that they began producing guitars - but during the 1950s their guitars began to take on legendary status. During the 1960s their popularity hit stratospheric levels because George Harrison was playing a modified 1957 Gretsch Duo Jet that he bought second hand for £70 from a ship crew member in Liverpool who had bought it brand new in New York. Most collectors agree that the 50s & 60s are the most sought after Gretsch guitars.
Get a Luthier (or do it yourself if you have the knowledge) to change the tuners to the ones I specified, take the sharp edges off the neck, throw some extra light strings on, and do a set up and this guitar becomes a dream guitar for kids or adults for a lifetime. So while the Yamaha APXT2 may not be the best guitar for your purpose, in this price range you WILL NOT find the perfect guitar, period. At least Yamaha gave us a foundation off which to build (which you can't say for other brands) and with a little modification here and there, you will have the perfect little guitar. I bought this for my child and I find myself picking it up and playing it more than my more expensive full size guitars. It's just a pleasure having it around the house, but not so much so before I modified it. There's nothing worse than having a guitar that's just about not a toy as compared to a professional guitar. You want to make your guitar easy to tune and enjoyable to play so spend the extra bucks to make it perfect and you will have no regrets.
An acoustic guitar is a guitar that uses only an acoustic soundboard (the top of an acoustic guitar) to help transmit the strings energy into the air in order to produce its sound. The soundboard will add various tonal qualities due to its own mix of tonewoods and bracing, and the soundboard also has a strong effect on the loudness of the guitar. Without a soundboard, the string would just cut through the air without actually moving it much because it is large, the soundboard can push the air, creating a much louder sound. In addition, the acoustic guitar has a hollow body that resonates, increasing the efficiency of its lower frequencies.

National did not seem interested in the project, and, as we’ve seen, Beauchamp and Barth left National that year to begin Ro-Pat-In with Rickenbacker, where they used their ideas on the development of the new Electro electric Hawaiian aluminum “frying pans” and Spanish guitars. Again, some disagreement exists regarding the relative roles of Beauchamp and Rickenbacker in the development of these guitars, but, again that’s a different story. Beauchamp applied for a patent on his “frying pan” on June 8, 1933, and again on June 2, 1934, eventually receiving the patent on August 10, 1937.
This is easily the most popular category of effect, and sonically is the natural first-step away from the thin sound of a straight, clean amplified guitar. If a player only owns one pedal, chances are it’s a distortion, fuzz, or booster box, and plenty of players have collections of several or even dozens of units from this genre, and use two or three at a time on their pedalboards for different colors and textures and levels of sonic sizzle. Yep, of the players who want to change their guitar’s pure sound in the first place, more probably want to filth it up than all of the other options combined.
However, these two companies were not always in as direct competition as might be assumed; yes they both made guitars, basses and amplifiers, but both tended to play to their strengths; Gibson's expertise was it's luthierie; they stuck to high end electric-acoustics, semi-acoustics and skillfully made solid bodies, whilst Fender excelled at electronics; they made amplifiers and easily built solid body basses and guitars.
What would happen if four former Marshall employees got together? Well in this particular case, they formed Blackstar! Their product range includes hand-wired amps (the Artisan series) as well as products featuring different digital technologies (the ID:series). Plus, we have them to thank for the existence of the ISF system, a control that allows to switch gradually between American and British sound. In spite of the company's young life (it was founded in 2004), the brand already has many artists associated to its name like Silenoz (Dimmu Borgir) and James Dean Bradfield (Manic Street Preachers).
The three pickups were originally identical in their construction. With the rising popularity of using pickups in combination, Fender introduced a new feature in 1977 coinciding with the standard 5-position switch; a reverse-wound, reverse-polarity middle pickup. As the description implies, the magnetic polarity of this pickup is opposite the other two, as is the direction of the wire winding around the bobbin. This provides a hum-canceling effect (removing hum induced by poorly shielded, medium to high output AC devices) in positions 2 and 4 on the selector switch. This principle had been known for many years beforehand, being applied in the form of Gibson’s humbucking pickup and Fender’s own split-coil pickup used on the Precision Bass.
The Teisco TG-54 was a two-pickup Les Paul, named for the year it was designed, 1954, not long after the original! It had a large white plastic covered pickup at the neck, set into the pickguard, and a slanted metal-covered pickup set into a metal tailpiece assembly, sort of like a Telecaster. Again, strings passed through the tail assembly and the body. Similar to the J-1, the volume and tone controls (same knobs) sat on a small rectangular plate, this time metal like a Tele, with an added chicken-beak three-way rotary selector switch.

Reverb – The best analogy for reverb effects would be playing your guitar inside a pipe. That’s an extreme level of reverb, of course, and these pedals will allow you to go from there all the way back to subtler effects like the natural reverberation of a concert hall. This effect sounds great with a clean tone, but beware of using it with heavy distortion or else you might lose too much definition from your sound.

Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.
The earliest boost pedals used a germanium transistor and was often in the form of a treble booster. The most famous treble booster is the Dallas Rangemaster which is rumored to have been used by Eric Clapton on the Bluesbreakers record, often referred to as the Beano record or Beano tone. (This is because Clapton is reading a Beano comic on the record cover). At the time Eric was using a Marshall JTM45 2×12 combo (commonly referred to as the Bluesbreaker because of this recording) and a Les Paul and man does it sound good. Allegedly he was using the Rangemaster to push the front end of the amp into more distortion. This has never been confirmed to my knowledge but is the source of much Internet speculation. But I have played an old Bluesbreaker amp with a Les Paul and it sounded pretty darn close.
Pots generally come in two types: 500k or 250k. K refers to 1000 ohms and is a measure of resistance, which is the amount of resistance the signal from your pickup receives before being passed to your output. As a result, increasing or decreasing the amount of resistance your output receives via your volume pot affects the overall volume of your guitar.
The Jackson JS22 Metallic guitar is a Dinky Blue guitar featuring a cut-away body type with solid body material. This solid body electric guitar is designed as a stage ammo metal for the serious and committed guitarists. The body of the Jackson JS22 is made of solid wood with basswood body finish, gloss orientation with right handed neck shape, with dinky neck consisting of maple wood.
First, remove the knobs of the pots that you want to replace. Some knobs are held in by setscrews. Look around the shaft of the knob to see if there is a screw head then unscrew the screw and remove the knob. Most knob are mounted on split shaft pots. There are no setscrews on a split shaft pot. Friction and pressure hold the knobs on the shafts in this case. You can pull the knob directly off the shaft of the pot since there is no screw. If the knob is stuck on the shaft, I usually use heavy gauges guitar picks to try to pry up the knob. You may also wrap a thin rag around the bottom of the knob and pull the knob off the shaft. Regardless how you get the knob off, be careful not to dent or ruin the finish on the top of the guitar. It is easy to rip the knob off of the pot and accidentally drop it on the guitar. Once the knob is removed, you can unscrew and remove the nut on the top of the shaft.
Now, since I have started on my wishlist there is another thing that I would like to add. I have seen multi angle videos that include a shot the finger board from the point of view of the player. Looking at this video angle it shows the fingerboard from the same angle as when you are playing it yourself. This is a great view as you do not need to translate what you see mentally. You see it, you play it the same way.
Feedback is essentially the presence of a sound loop where the guitar’s amplified sound causes increased vibration in the strings. The sound of this vibration then gets further amplified, continuing the loop and resulting in distorted sound. Usually the source of the feedback is the guitar’s amp, but in cases of hollow-body guitars, the amp’s output resonates in the actual guitar body. For many music styles feedback is an undesirable trait, but it’s also been used as an awesome effect by prominent guitarists such as Jimi Hendrix and Kurt Cobain.
I am an SG player through and through. I own a bunch of them- mostly from the initial run of SG Special Faded with the moon inlays, because that particular run felt right to me. I am looking to have a custom SG style guitar made, but I don't know of any builders who make SGs. Can anyone tell me a boutique or custom shop builder who does SGs? Thanks!

If you’re looking for a unique sound that delivers an exaggerated twang, than the Gretsch G5422TDC Electromatic is the best electric guitar to offer these features. Designed with wider frame and a hollow body, this guitar utilizes “Black Top” Filter’Tron pickups to deliver a dynamic sound that is both bright and focused in its tone. The toggle has three positions that allows the user to customize the balance of the tone, and all strings on the guitar are able to deliver strong intonation due to the Adjusto-Matic bridge. The vibrato tailpiece adds resonance and depth to the sound quality, and by utilizing maple for the body frame there is a clarity provided within the tone that is unique to that design. With a three position pickup, open-back tuners, and a rosewood fingerboard, this retro style guitar provides a high-quality option for musicians alike. Here’s a great G5422TDC video for some samples of that warm hollow-body sound.
It features a solid mahogany top, supported by laminate mahogany back and sides, which gives a warmer tonality and a very earthy vibe. It also comes with Graphtech NuBone nut and saddle, a premium feature that you normally have to pay extra to add into your guitar. Giving this guitar its amplified voice is a Fishman Presys II 301T electronic pickup/preamp system that comes with a built-in tuner. On top of all that, the Washburn WL012SE does not skimp on ornamentation, which includes the Washburn Parquet rosette and rosewood bindings.
"The development of the modern tuning can be traced in stages. One of the tunings from the 16th century is C-F-A-D. This is equivalent to the top four strings of the modern guitar tuned a tone lower. However, the absolute pitch for these notes is not equivalent to modern "concert pitch". The tuning of the four-course guitar was moved up by a tone and toward the end of the 16th century, five-course instruments were in use with an added lower string tuned to A. This produced A-D-G-B-E, one of a wide number of variant tunings of the period. The low E string was added during the 18th century."[48]

Confusion sometimes revolves around the distinctions between overdrives, distortions and fuzzes, but in theory each should do approximately what it says on the box—even if some also do a little of the other breeds’ jobs along the way. In the case of overdrive pedals, the intention is often twofold: either to provide a gain boost to “overdrive” a tube amp into distortion, or to approximate the mildly distorted sound of a slightly overdriven tube amp. In practice, most do a little of both. Crank the average overdrive toward the max and it usually coughs up an element of self-generated distortion, which can easily be heard when DI’d into a mixing desk set to well below overload levels; generate enough distortion, and things can also sound a little fuzzy. Despite the gray areas, however, there are definitely distinctions between the types. It all makes some sense if you think in terms of the degree of clipping achieved by the pedal, with overdrives generally being soft-clipping devices and distortions being hard-clipping devices.

You’ll need to get yourself setup with an account on some of the web stores selling components such as effects pedal specialty stores listed above, and some general component stores such as Mouser and Digikey. AMZ provides a list of the components required for each project. Make sure you check carefully the component requirements such as type of capacitors. Many components may have suitable electrical values but different physical layouts, so use the datasheets for your chosen component. Measure the spaces and holes on your PCB to make sure the components will fit. Remember that you’ll also need an enclosure in which to install the finished circuit and don’t forget things such as knobs, battery holders etc.
• Guitar : ELECTRIC SUNBURST captures the sound of a classic guitar, chosen with its rich, warm and versatile sound. The continuous signal path has been retained throughout, including high-quality cables, vintage tube preamps and high-resolution transducers to ensure that every nuance of this legendary instrument was accurately fixed. Since the string holder and neck were recorded separately, you can fully control the balance of the mix. Moreover, a condenser microphone was installed above the strings to capture subtle sound nuances and add punch and realism.
After a peak in the 1970s, driven by the use of several high profile players, another lull occurred in the early 1980s. During that time, CBS-Fender cut costs by deleting features from the standard Stratocaster line, despite a blues revival that featured Strat players such as Eric Clapton, Stevie Ray Vaughan, Robert Cray and Buddy Guy in their choice of the Stratocaster as a primary blues-rock guitar.[citation needed] Yngwie Malmsteen is known for playing a Stratocaster in the Neo-Classical genre.
Tremolo – Not to be confused with a tremolo bar (which is closer to the Whammy pedal), this effect works on volume. You can think of tremolo pedals as being like strumming a note, and then wiggling the volume knob on the amp while it’s ringing. Usually, the pedal will have controls for speed (equivalent to how fast the volume is “wiggled”) and depth (equivalent to how far the knob would be turned).

As to the “where,” positioning your mic an inch or less from the grillecloth and aiming it straight at the center of the speaker cone – pointing at the dust cap, in other words – yields a bright, punchy, detailed sound that suits many requirements, but can be too harsh. At the other extreme, aiming the mic at the edge of the cone, where the cone meets the suspension (the area just inside the speaker cutout in the cab’s mounting baffle) usually results in a looser, warmer, more raw and edgy tone. Between these two positions, there’s a wealth of voices to explore, and every inch of real estate that the mic covers between dust cap and cone edge will bring a noticeable sonic shift, without touching the amp’s controls. Also, aiming the mic straight at the speaker, in other words, mounted at 90 degrees to the flat plane of the front of the amp, and aiming it off axis, at a slight angle to the speaker, will illicit different sounds, too. With an assistant helping, or the guitarist playing if that’s not you, try moving the mic around the surface of the speaker while listening for the changes in tone through monitors or headphones, or if you don’t have enough isolation between live amp and monitors, record a little in each of several positions to listen back to. Pick the position you like for the track, and go with it.
You've Changed.  Yep, you still LOVE your guitar, but man, you are now playing through a sweeet pedal board and amp that has way more gain than you could ever use.  The days of plugging straight into a Twin Reverb and trying to bully her into distortion is (thankfully) long gone.  Plus, you're older and wiser now, you no longer judge a pickup's value simply in it's output level ... you have now acquired a taste for true tone.  You want rich complex harmonics and touch sensitivity.  Face it, those EMG's did what needed to be done in 1991, but it's time to move on! 

Keep focused on one goal at a time. For example, you could spend a week or two really getting to know 5 chords (why 5? Just pick a realistic number for that window of time and go with it!). Then, in the next week or two, practice changing between those chords using different combinations. In the next week, work on your strumming or picking, using the chords and chord change combinations you've learned.
Chorus – a frequency-based effect that makes your guitar sound like more than one guitar is playing. The effect is created by doubling your guitar tone one or more times (using a short delay) and then varying the pitch of the double slightly up and down against the dry guitar tone. Chorus pedals have at least two controls: Depth and Rate. The Depth controls the lowest and highest pitches that the doubled tone varies between. The Rate controls the speed that the doubled tone moves up and down in pitch.
I have a Montclair guitar, it sounds like I have an original but I have some questions. I purcahsed this quitar about 40 years ago. It is a dark brown archtop, with two cutaways and a pick guard like in the picture. On the top of neck the only says Montclair, strait across, and on the back it says "steel reinforced neck". On the inside the only number is L 6089.

: Palmer is a U.S.A. company based in Miami, FL. They contract out the building of cheap guitars to China and such; while reserving the high end, high priced guitars for those made in the states (like most guitar makers today). I had one that had a broken head stock. I paid $50 for it, just as a camp guitar. It sounded fair, but I could tell it was made cheap. I'd compare them to a cheap Cort, Mitchell, or Fender.

Harmony Hollywood H38- OK, here's the one we will sell. She's about the same as above but with opposite color combo. This one has a nice vintage DeArmond Gold Foil Pickup. Action is medium, but if you would like a lower action, we will be happy to cut that bridge a bit down. Guitar is in  nice vintage condition. All original except the period style Rosewood Bridge and reproduction Harmony Pick Guard. SOLD

The weapon of choice for today’s modern recording musician, the Axe-Fx is as good as it gets in terms of modeling amps. Used by countless musician both live and in the studio, this machine has proven to deliver for just about every musical style under the sun. Notable users of the Axe Fx include Alex Lifeson, Steve Vai, Misha Mansoor, and many others famous musicians. The Axe-Fx II features a high resolution speaker simulator with 150+ “Factory” models and room for 512 “User” cab locations.  It contains a vast virtual inventory of hundreds of vintage and modern guitar amps, speaker cabinets, guitar stompbox and studio effects, and more. The options are pretty much endless.
I play a Tele, but I can’t say I’m in love with it. I have this feeling that a Gibson would sound and play differently – perhaps warmer and more mellow – but I have no factual basis for thinking that. It is based more on who I have seen playing different models, and what style of music they are playing. This is what I think most of the differences guitarists imagine come down to – a lot of preconceived notions, reinforced by vague generalizations (like the ones in this article) and marketing hype. But I readily admit I could be wrong about that.
B.C. Rich specializes in guitars for the heavy metal and hard rock crowd. They’ve produced some of the most legendary designs in the history of metal, including the Warlock, Bich, Virgin, and Mockingbird. Their instruments helped to mold the hard rock and thrash revolution of the 1980s and B.C. Rich is still a great choice for any guitarist looking for an instrument that looks and sounds as edgy as possible.

Very large cabinets, such as 8x10" cabinets, may have both wheels and a long "towel bar"-style handle to facilitate moving the equipment. Some 8x10" cabinets have handles on the top and bottom to facilitate two-person carrying of the cab. Some combo amplifiers have wheels and a retractable carry handle, to enable bassists to walk while pulling their bass amp; this can enable bassists to walk onstage with their bass and amp or walk to a venue with their gear.
A common format of bass amplifier–the "combo" amp–contains the amplifier electronics and one or more speakers in a single wooden cabinet. Combo amps have been used by musicians since the 1920s, as they are convenient for transporting to rehearsals and for performances at small to mid-size venues. Combo amps range from small, low-powered "practice amps" used for individual practice, to mid- and large-size and more powerful combo amps which produce enough volume for rehearsals and small to mid-size venues (e.g., nightclubs). For larger venues, such as stadiums, bassists may use the "bass stack" approach, in which one or more separate speaker cabinets, each with one or more speakers (but not containing an amplifier) and a separate "head" containing the amplifier electronics are used. With a large "bass stack", a bassist can obtain a much higher wattage and onstage volume than a "combo" amp could provide. As with an electric guitar amp, a bass amp is not simply used to make the instrument louder; performers use the preamplifier and equalizer controls and, particularly in amps from the 1980s and 1990s onward, the onboard electronic effects, to create their preferred tone.
Some distortion effects provide an "overdrive" effect. Either by using a vacuum tube, or by using simulated tube modeling techniques, the top of the wave form is compressed, thus giving a smoother distorted signal than regular distortion effects. When an overdrive effect is used at a high setting, the sound's waveform can become clipped, which imparts a gritty or "dirty" tone, which sounds like a tube amplifier "driven" to its limit. Used in conjunction with an amplifier, especially a tube amplifier, driven to the point of mild tonal breakup, short of what would be generally considered distortion or overdrive, these pedals can produce extremely thick distortion sounds much like those used by Carlos Santana or Eddie Van Halen. Today there is a huge variety of overdrive pedals, and some of them are:

{ "name": "Ebony", "skuUrl": "/Epiphone/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Ebony-1500000014894.gc", "status": "instock", "statusText": "In stock", "skuItemType": "New", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "availableDate": "10-20-2018", "price": 149.00, "isOnSale": false, "msrp": 248.00, "salePrice": 149.00, "easyPayOptions":"0,0,8200002,12 Months Promotional Financing,10/31/2018,Special 12-month financing + $7 back in rewards Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "formatedIntegerValue": "149", "decimalValue": "00", "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingsAmount": 99, "discountPercentage": 40, "promos":["coverageEligible","freeShipping","international"], "warranty": true, "sku": "site51500000014894", "shipToStore": true, "displaySku": "J40301000002000", "displayId": "1500000014894   POS #: 112318332", "serialized": false, "stickerDesc":"Top Rated", "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "commerceType": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Ebony", "freeGiftWarning":false, "freeGiftWarningTips":"", "kitCarouselItems": [], "availableInStoreOnly": false, "isShipsInternational": true, "checksum":"93895071200", "restrictionType":"", "restrictionError":"" ,"storeInfo":[ { "storeName" : "La Mesa", "storeStatus": "Ship to Store" } , { "storeName" : "San Ysidro", "storeStatus": "Ship to Store" } , { "storeName" : "San Marcos", "storeStatus": "Ship to Store" } ] }
By definition, distortion pedals are designed to adulterate the guitar’s signal in and of themselves. To use a rough analogy to tube amp tone, where overdrives are looking to take you into anywhere from pushed to cranked JTM45 or tweed Bassman, distortions aim to do the Mesa/Boogie Triple Rectifier, Bogner Ecstasy, or six-Laney-full-stacks trick in a 3"x5" box. These pedals unashamedly screw with your sound. They generally filth it up and slap their own notion of the ideal heavy rock or metal EQ all over your tone’s backside. But of course they will also boost the guitar signal as well (depending on the volume/output/level settings), and the sound we associate with them is still some confluence of pedal and amp, not to mention guitar.
Mahogany is a durable wood, often described as dense and that is used in the construction of guitars. The main advantage of purchasing an instrument made from this material is the fact that it highlights the unit’s bass and midrange. Therefore, if you are into mellower tones, this is the material that you should pay attention to. The resulting guitars made from this material are usually brown.
Fawned over by hard rock-loving guitarists the world over, Marshall is one of the few amplification brands that really needs no introduction. And if you’re looking for aggressive, overdriven rock – this amp is one of the best beginner’s options. What makes this one really special, however, is the sheer number of sound-shaping options it gives you – thanks to its ability to model a whopping 14 MST preamps, 4 MST power amps, and 8 MST speaker cabinets. That’s 448 possible combinations, if you’re keeping score. You can even connect it to your computer via USB or use it as a Bluetooth speaker. If versatility is your top concern (it probably should be), look no further.
TASTING NOTES: When you add a second speaker, tones acquire texture and detail due to the phase cancellations between speakers. Tones also get more diffuse, with rounder highs and softer focus. Note how the 4x12 Marshall configuration has a muscular low-mid thump that the Fender configurations lack. That’s due in part to the closed back of the Marshall cab.

The color black is powerful, mysterious and evokes a sense of potential and possibility. It’s widely regarded as the single most popular color for Rock ‘n’ Roll thanks to rock pioneers such as KISS and AC/DC. Get back in black with these fine offerings from Dean with our vivid take on the classic black electric guitar with a few other shades thrown in for good measure. Plug in and play. Get your wings!
Power amps are rated in volts and generally come in .7V, 1V, and 1.25V. Most preamps don’t produce strong enough output to power a 1.25V. Most manufacturers don’t rate the average output of their preamp which makes things even harder in determining compatibility. What you can look for is the “line level“, “dBu”, or “dBv” information when researching this aspect of your acoustic electric guitar.

Negative feedback controls the accuracy of the output stage's reaction to the signal coming from the preamp stage, and reduces distortion at the point where it's fed back into the signal chain. Too much negative feedback causes a sluggish amp response with insufficient attack, while too little negative feedback produces an exaggerated and harsh upper midrange response with an overly aggressive pick-attack sound. The Presence control is thus a useful contributor to the overall tone production of the amp.
A chord is inverted when the bass note is not the root note. Chord inversion is especially simple in M3 tuning. Chords are inverted simply by raising one or two notes by three strings; each raised note is played with the same finger as the original note. Inverted major and minor chords can be played on two frets in M3 tuning.[56][74] In standard tuning, the shape of inversions depends on the involvement of the irregular major-third, and can involve four frets.[75]
Your circuit shows a conventional RC tone control with a further small capacitor wired directly across the pickup. If you regard that extra cap, not as an additional component, but instead as the self capacitance of the pickup, which is normally a few hundred pF, then your circuit is already present in almost all electric guitars. OK I realise I’m being a bit smartarse here, it did strike me as another way of looking at this.

This is a very rounded sounding electro-acoustic bass. Recorded straight without a mic, so there is no noise. This fits nicely with most types of music. Its deep but not overpowering, leaving room for other instruments. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix somewhere between the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two.

Every working guitarists knows that if he doesn't have a good guitar doctor, his dreams of being a master shredder who destroys the crowd with rakes from his pick as he slides it up the string are dead. From a broken headstock to a cracked neck, a guitar technician is a master of skills. He's an electrician, a plumber, a physician and a surgeon. But if a guitarist wants to shoot fireballs out of his guitar, he'll need more than just a technician; he'll need a guitar master.
Your fighting skills are legendary — you have all the right moves, the sharpest strategies and the guts to battle your way to the top. But when you enter the Mortal Kombat Tournament, the competition rises to a whole new level. It will take everything you have not only to prove you're the best, but to stay alive. Hang on tight because, ready or not, you're in for the fight of your life. Mortal Kombat X delivers the fast-paced fighting action that fans of the franchise have come to know and love, fueled by brand-new technology that elevates your experience to the next level. Enter the brutal world of Mortal Kombat with cinematic presentation that offers stunning visuals. Rise to the challenge of the competition with all-new gameplay. Craft your fighting and strategic styles with the ability to choose from multiple variations of each character. Prove your dominance with fully connected online play that lets you decimate the competition and show you're the best in the world. Steel yourself for battle — the fight for global supremacy, and your life, is on.

Bottom Line: The Line 6 HD500X is incredibly in-depth in the amount of options and editability it gives you. Doing all of it from the small screen on the actual unit is headache-inducing, but if you have a computer you can hook it up via USB and edit your sounds from there much more easily. There’s more of a learning curve with the HD500X than there is with the Zoom G3X, but the presets are decent enough and allow you to audition it if you’re the impatient type. Where the HD500X lacks is that it’s less of an immediate-gratification pedal, and it’s hard to tweak on-the-fly and come up with potentially inspirational sounds. Because of how the interface is, this is definitely more of a “sit down with headphones and tinker with it to get your perfect sound” type unit. If the effects quality of the Zoom G3X is a 7/10, the Line 6 HD500X is an 8.5/10. This is the one to get if you’re the type that likes to dig in and have control over every little thing. The price tag is a little on the high side, but considering what a powerhouse this unit is, it’s definitely not unreasonable.
When two or more speakers are used in the same cabinet, or when two cabinets are used together, the speakers can be wired in parallel or in series, or in a combination of the two (e.g., two 2x10" cabinets, with the two speakers wired in series, can be connected together in parallel). Whether speakers are wired in parallel or in series affects the impedance of the system. Two 8 ohm speakers wired in parallel have 4 ohm impedance. Guitarists who connect multiple cabinets to an amplifier must consider the amp's minimum impedance. Parallel vs. series also affects tone and sound. Speakers wired in parallel slightly dampen[s] and restrain[s] them, giving what some describe as "tighter response" and "smoother breakup". Some describe speakers wired in series (usually no more than two) as sounding "...looser, giving a slightly more raw, open and edgy sound."[26]
Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
Full hollow-body guitars have large, deep, fully hollow bodies and are often capable of being played at the same volume as an acoustic guitar, and therefore of being used unplugged at intimate gigs. The instrument originated during the jazz age of the 1920s and 1930s, and is still considered the classic jazz guitar, nicknamed the “jazzbox.” Like semi-hollow guitars, they often have f-shaped sound holes. Having humbucker pickups (sometimes just a neck pickup) and usually strung heavily, jazzboxes are noted for their warm, rich tone. A variation (popular in country and rockabilly) with single-coil pickups and sometimes a Bigsby tremolo has a distinctly more twangy, biting, tone than the classic jazzbox.