The Hawaiians are likewise hard to identify. One looks to be similar to the later Teisco EG-7L, with a Gibson sort of shape and a pair of offset rocket shapes on either side of the pickup which house roller wheels for volume and tone. A second appears to have a rounded body similar to a Rickenbacker frying pan, looking perhaps like the later Teisco EG-K. This had the same slotted pickup as the J-1, and a single volume control. Finally, there’s an unidentified eight-string lap with an elongated sort of rectangular body and an elevated fingerboard. This had a volume and tone with white knobs, and the tuners were behind the head, rather than sticking straight up, as on later eight-strings.
This guitar was first introduced in 2014, and has since been one of their more popular acoustics - thanks to its USA hand-crafted quality which you can own for a relatively accessible cost. The guitar is built using North American tonewoods that include solid walnut back and sides, along with a solid Sitka spruce for the top. This configuration, along with Gibson's premium build quality results in a balanced and full sounding acoustic voice, that elegantly matches the vibe of the instrument.
Wow, didn't expect a budget-priced instrument to perform this beautifully! I had planned to use this as an introduction into nylon-string (from electric), then upgrade to a better (i.e. more expensive??) model. That won't be necessary! The NTX700C is absolutely perfect for me and will remain the nylon-string guitar in my stable. I am a professional solo jazz guitarist and ventured into a nylon-string for my Brazilian jazz set. Being an electric player, the transition with this model has been much easier than a traditional classical. The onboard electronics are great with my Bose L1 system. I have the cedar top, and the tone is very mellow, and already opening up with only three weeks of playing.
In 1995, an effort was made to re-introduce Rickenbacker acoustics, with factory production beginning in their Santa Ana manufacturing facility in 1996. Four models of flat top acoustic Rickenbackers were depicted in factory literature (maple or rosewood back & sides, jumbo or dreadnaught shape). Each of these four models was also available in both six- and twelve-string configurations, yielding a range of eight distinct instruments.[11] (The 760J “Jazzbo,” an archtop model, was only built as a prototype, with three examples known to exist.) It is estimated that fewer than 500 Rickenbacker acoustic guitars were built before the factory shut down the acoustic department in mid-2006.
This is a great pedal to learn from. The instructions are clear and the circuit is pretty basic. The kit itself is complete and the components are good quality. The effect is unique when compared to other diy pedals, and adds a nice flavor to your sound. About the only thing I would add is an led to know when the effect is on, the circuit can always be modified. To update, I was able to change the .047cap with a .022 cap to get a clearer sound while using my bass with it.....sounds great for some of our rockabilly type songs. So if you would like to use this for your bass just change that one cap and you're good to go.
Cordoba is a fast growing guitar builder that specializes in nylon string acoustic instruments, played by artists like the Gypsy Kings and Bon Iver just to name a few. And with their ever increasing reputation, we find it only fitting to give them a spot on this list, specifically for the impressive quality and tone of the GK Studio. This nylong string guitar incidentally provides a refreshing break from the many steel-string acoustics that are featured here.
I have had an old beat-up non-functioning norma electric archtop (hollow body) since i was 13(in 1984). A friend gave it to me and said i could have it if i could fix it... well like 20 years later i fixed it! and had the electrical redone for like $60.00. it needed some new parts (basiclly EVERYTHING) but i really wanted an archtop and knew i could fix this one up to sound pretty cool.... what i have found out about these guitars is that they really arent worth anything... i thought this one may have been from the late 50's early 60's so i may be worth something.. but as it turns out most people i have talked to about restoring it says its not worth anything that they were just little copies made in the 50's-60's and bought in the US at probably sears or something.... oh well I DONT CARE i really like it and its made well, so for the sheer vintage look and great feel I LOVE IT!-jj
Smaller-scale instruments are produced to assist children in learning the instrument as the smaller scale leads to the frets being closer together, making it easier for smaller hands. The scale-size for the smaller guitars is usually in the range 484–578 mm (19.1–22.8 in), with an instrument length of 785–915 mm (30.9–36.0 in). Full-size instruments are sometimes referred to as 4/4, while the smaller sizes are 3/4, 1/2 or 1/4.
Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.
Compression is somewhat of a utilitarian effect, though I suppose some players see it as a key part of their sound. Essentially, compression is used to even out your sound. In recording situations this means helping instruments blend together by smoothing out the peaks and valleys inherent in the overall frequency spectrum. Louder sounds, like the crack of snare drum or a shout from a vocalist, become smoother, softer and woven into the overall mix.
I had a Soundgear 5 string bass when they first came out and it was one of the worst basses I have ever owned. Crappy electronics, uncomfortable neck and the list goes on. I used it as a back up when I was touring 100+ shows per year and luckily my Tobias Killer B5 never had issues other than the occasional broken string. The best thing I can say about it is I lent it to a "colleague" and he ended up stealing it. Good riddance!
This guitar features two MP-90 pickups that can be switched on at the same time to produce sweet yet aggressive sounds. This guitar is mainly used to play country and indie music. This guitar has a radius of 9.5’’ and 22 medium jumbo frets for comfort and speed of play. It has a six saddle hard-tail bridge that allows precise settings and ease of adjusting string heights. The fingerboard is maple finished which makes for fast play. This guitar features three finishes sunburst, black transparent and vintage white.

Even if you are on a budget, it’s always worth looking in the higher price brackets and considering something a little more expensive, which will offer better sound quality (which is always encouraging), better build quality (usually more comfortable to hold and play), looks cooler (which will keep you motivated), and will last you longer – allowing you to grow with the guitar. It’s best to buy at the top end of what you can afford. For additional inspiration, make sure to check out this electric guitar list.

Schecter Keith Merrow KM7 MKIII Electric Guitar, 7-String   New from$1,699.00In Stockor 12 payments of $141.59 FREE 2-DAY SHIPPING Epiphone Limited Edition Matt Heafy Les Paul Custom-7 Electric Guitar, 7-String   New from$949.00In Stockor 12 payments of $79.09 FREE 2-DAY SHIPPING ESP LTD SCT-607B Stephen Carpenter Baritone Electric Guitar, 7-String   New from$1,099.00In Stockor 12 payments of $91.59 FREE 2-DAY SHIPPING Ibanez FRIX7FEAH Iron Label Electric Guitar   New from$899.99Only 2 Left!or 12 payments of $75 Free Ground Shipping See All Electric Guitars: 7-String
The Yamaha FG830 uses a well-engineered combination of woods to create a solid body and neck suitable for pro-level performance. You simply cannot go wrong with this guitar; the workmanship of this guitar is a cut above other acoustics in its class. Owners love the gorgeous dreadnought sound, describing it as rich, resonant, and well-rounded. One satisfied customer boasted that in a room full of acoustics, his Yamaha would “float to the top” of the din.

Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
A marvelous acoustic guitar with 6 strings and natural color. it has its body made from mahogany and a spruce top. The fret board is also made from mahogany. It one of the most beautiful guitar producing incredible sound. It is designed to suit the needs of the beginner in guitar playing. The price ranges from around INR 14,760 depending on available offers. To find more product information relating to Epiphone DR-212, click on the link below:
Teisco produced guitars that were sold in the U.S. as Teisco del Rey as well as Silvertone, Beltone, Duke, Decca, Heit Deluxe, Jedson, Kimberly, Kingston, Lyle, Norma, Tulio and World Teisco, as well as some of the early Kents. At various times Teisco guitars were made for and sold under the now well-known Ibanez name. They have developed somewhat of a cult following in the U.S. which has resulted in some unrealistic prices for some models.
I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.
The OO-18E was basically the small-bodied OO-18 acoustic with mahogany back and sides, spruce top, and the ring-mounted DeArmond tucked right at the end of the fingerboard. These featured one tone and one volume control, with large two-tone plastic knobs situated down on the lower treble bout. The first prototype was serial number 166839. OO-18Es were produced from 1959 to 1964. Around 1,526 of these were produced.
While this seems like you’d be stuck on either extreme of the guitar industry, don’t panic. There is a compromise between the two. You can get a guitar with a solid top and laminate back and sides like the LX1E Little Martin Acoustic Electric Travel Guitar. Martin shows you that guitars with this construction tonewood combo doesn’t always mean it’s going to be a poorly-made guitar. However, it does provide enough jump up in quality to improve sound performance while still keeping costs within the affordable range.
The first guitar amplifiers were relatively low-fidelity, and would often produce distortion when their volume (gain) was increased beyond their design limit or if they sustained minor damage.[3] Around 1945, Western-swing guitarist Junior Barnard began experimenting with a rudimentary humbucker pick-up and a small amplifier to obtain his signature "low-down and dirty" bluesy sound. Many electric blues guitarists, including Chicago bluesmen such as Elmore James and Buddy Guy, experimented in order to get a guitar sound that paralleled the rawness of blues singers such as Muddy Waters and Howlin' Wolf,[4] replacing often their originals with the powerful Valco "Chicagoan" pick-ups, originally created for lap-steel, to obtain a louder and fatter tone. In early rock music, Goree Carter's "Rock Awhile" (1949) featured an over-driven electric guitar style similar to that of Chuck Berry several years later,[5] as well as Joe Hill Louis' "Boogie in the Park" (1950).[6][7]
The tone knob is similar. Like the volume knob, the more you turn down the knob, the more of the sound you contain instead of sending it through the amplifier. But there is an additional trick involved. See, the current generated from each string is quite complex, like the sound characteristics it produces. Think of it like a continuum. On one end, the current is turned into low frequency sound (which makes the guitar sound 'warm') and on the other end of the continuum, the current generates high frequency sound (which makes the guitar sound 'bright').

One of the most respected guitar manufacturers in the world, Epiphone electric guitars can be found everywhere from small-town basements to the biggest arena rock stages. The reason is because of their dedication to providing high-quality instruments for musicians of all tastes and skill levels, and throughout this catalog you'll find more than enough choices to prove it. After all, everyone who has a desire to crank up and play deserves an electric guitar that looks, sounds, and performs flawless, and Epiphone has an option for every budget. It's easy to see how trusted the Epiphone name is when you consider how many best sellers and top-rated items make up this section. For that matter, all you have to do is look at the many top-recording artists who have Epiphone signature models, including metal legend Zakk Wylde, virtuoso Gary Clark, Jr., and Tommy Thayer of Kiss. Speaking of signature guitars, check out the popular Limited Edition 2014 Joe Bonamassa Les Paul Standard Electric Guitar. Sporting a gorgeous Pelham Blue with a black back and a Bonamassa neck profile, this axe looks as slick as it plays. As for its sound? You can expect plenty of power in every chord you hit thanks to the Gibson USA BurstBucker-2/3 humbuckers. Now for those who prefer the lightweight feel and ringing sound of a semi-hollow, go with the Dot Electric Guitar. Equipped with dual humbuckers and a 3-way pickup selector, the Dot can go from growling snarls to crystal-clear sustain. Additionally, the two volume tone controls allow you to tailor your sound, while the smooth, 22-fret rosewood fretboard means you can play at lightning-fast speed. And this is only a taste of what Epiphone has in store for you. In fact, taking a tour through Epiphone's extensive selection of electric guitars is just as fun as playing them. From solid body electrics and hollow bodies to semi-hollows and even guitars for left-handers, the options are seemingly endless. So stick with Epiphone, and you'll have no problem finding an instrument that reflects your own discerning style.

Far as commercial recordings go, the oldest recording seems to be by the Hawaiian group Noelani Hawaiian Orchestra in 1933, which did four songs featuring the electric lap steel recorded on Victor records. However, the guitarist is unknown. Bob Dunn recorded electric lap steel in 1935, as part of the country swing group Milton Brown and His Musical Brownies. George Barnes recorded "Sweetheart Land" and "It's a Low-Down Dirty Shame" with Big Bill Broonzy in early 1938, followed a couple weeks later by  Eddie Durham with the Kansas City Five. Barnes played conventional guitar, not lap steel, so that's the first recording of a "conventional" electric guitar performance.
Gretsch is one of the oldest manufacturers on this list. It was founded in 1883 in New York City by Friedrich Gretsch. He was an immigrant from Germany and was only 27 at the time he founded the company. Gretsch has a wide selection of both acoustic style and electric style guitars. They have models in just about everyone’s price range. You can buy a Gretsch for under $500 or over $2000. Their style is fairly unique. They have an almost “classical” look to them. Keep in mind that the older Gretsch guitars were not as consistent in quality as they are today. So if you’re looking to buy used, try to keep it so you’re buying guitars that are made semi-recently. On the other hand, you might get lucky and snag a great deal. As expected, their sound is excellent.
Wet Set: If you have a sound that you want to push a long way back in the mix, it can often be better to make your reverb effect pre-fader, and temporarily remove all the dry sound. Then alter the sound's EQ and reverb settings while listening only to the wet reverb sound. Once you've got that sounding good, gradually fade the dry sound back in until you're happy with the wet/dry balance. This approach can often be more effective than simply whacking up the reverb level while you listen to the whole song. Martin Walker

This is by and large the most common body type, and includes some of the most iconic axes ever made, like the Gibson Les Paul and Fender Statocaster. Solid-body guitars simply are capable of the widest range of tones; their construction also allows for reduced feedback and increased sustain compared to other guitar types. This style is extremely well suited to rock and alternative, but if you really aren’t sure of what music you want to play, you’re not likely to go wrong by picking one up.
Boost is an effect which boosts the volume of an input signal, in order to assure that the amplifier is driven beyond its regular dynamic range and thus will produce clipping and thereby distortion. Boosts are very useful for tube amp players who wish to increase the gain on their amplifier without having to modify the tone the way a traditional overdrive or fuzz pedal would. A boost is often measured by how transparent it is--although there are some on the market (such as the Katana by Keeley and the EarthTone by NOC3) that employ JFET designs to produce additional "dirt" when engaged to add a subtle fattening effect to the boost.
If you really like to cover all options, record using any of the above methods but also take a straight DI feed with no effects and record that onto a separate track so that you can process it later. Some engineers have been known to use a recorded DI guitar track to drive a guitar amplifier, which is then miked up and re-recorded, but you could take the easier route of using a hardware recording preamp or a guitar amp emulator plug-in to process the track.

Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.
Resonator guitars are distinctive for not having a regular sound hole instead they have a large circular perforated cover plate which conceals a resonator cone. The cone is made from spun aluminum and resembles a loudspeaker. The bridge is connected to either the center or edge of the cone by an aluminum spring called the spider. The vibrations from the spider are projected by the cone through the perforated cover plate. The most common resonator guitars have a single cone although the original model patented in 1927 by John Dopyera had three and was called a tricone resophonic guitar. Resonator guitars are loud and bright. They are popular with blues and country guitarists and can be played with a slide or conventionally.
The E minor chord is one of the simplest to play because you only use two fingers Take extra care not to allow either of them to touch any of the open strings, or the chord won't ring properly. Strum all six strings. In certain situations, it may make sense to reverse your finger position so that your second finger is on the fifth string, and your third finger is on the fourth string.
The Guitar Chords: Easy-to-Use, Easy-to-Carry, One Chord on Every Page does one thing extremely well: it is spiral bound. It’s more of a reference than anything else, but one that musicians of all levels will appreciate. It covers the gamut of chords with not just one but two variations of each one. Of course, many have more than that, but it’s good information just the same.
4) Aside from enough publishing errors that, to my sensibilities, mean that the book is not ready to be published, instructions are shown on how to add a Varistor switch to a guitar, and a Les Paul is used for the example. The drilled hole given as the example is nothing less than a hack job, I hate to say it, but it is. I would faint if I saw a tech do that to my guitar. Besides its being really bad advice in the first place, if you are going to do it, DONT follow this example!

Whether you call us Guitar Center Forth Worth or GC Cowtown, it's all the same to us! One way or the other, we'll be sure to send a smile and a big Texas "Howdy!" your way when you walk in the front door. Conveniently located on South Hulen Street, we're just a stone's throw from Hulen Mall, near the Chisholm Trail and I-20 interchange. Turn in when you see Chili's, and get ready to experience the down-home vibe that's been growing our community of regular customers since our grand opening back in 2004.First and foremost at Guitar Center Fort Worth, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales to repairs, our staff in each department is well-trained to cater to Dallas/Fort Worth area music-lovers. Our store is open every day of the week, so there's always a right time to visit even if you're on a busy schedule.
LPM is an online music school. We teach a variety of instruments and styles, including classical and jazz guitar, piano, drums, and music theory. We offer high-quality music lessons designed by accredited teachers from around the world. Our growing database of over 350 lessons come with many features—self-assessments, live chats, quizzes etc. Learn music with LPM, anytime, anywhere!
-Would be nice to edit the string colors, add training modes telling you which finger to hit the note with, how many times to play through a sequence (so you learn/memorize the song, vs just respond to the game - i.e is the chorus sequence repeated 4 times before moving onto the next part of the song?),indicating strumming patterns to help with timing (newbies tend to down pick everything and just pick faster when the notes are closer vs switching to an up-down strum) etc.
Tapping, in which both hands are applied to the fretboard. Tapping may be performed either one-handed or two-handed. It is an extended technique, executed by using one hand to tap the strings against the fingerboard, thus producing legato notes. Tapping usually incorporates pull-offs or hammer-ons as well, where the fingers of the left hand play a sequence of notes in synchronization with the tapping hand.
This should give you an idea of when the majority of the production for any one model occured (majority meaning more than 5 instruments per year). Note this does not mean a model can not exist outside of these years - it certainly can. Just these are the years recorded by Martin in their ledgers. Note this list (for the most part) does not go past 1969.
One full step down from standard tuning. Used by bands/artists such as Volbeat, Mötley Crüe, Nightwish, Pantera, P.O.D., Sepultura, Dimmu Borgir, Cradle of Filth, Watain, In Solitude, Agalloch, Inquisition, Drive-By Truckers, Soulfly, Children of Bodom, Symphony X, Oceansize, Death, Decrepit Birth, Dream Theater, All That Remains, Exodus, Gojira, Shadows Fall, Mastodon, Asking Alexandria on their Stand Up and Scream, Ghost, Lordi, and Kreator. Used in a vast majority of songs by musician Elliott Smith. Also used in Nirvana's songs "Come As You Are", "Lithium" and "Drain You", by Metallica in their songs "Sad but True", "Devil's Dance", their cover of "Whiskey in the Jar", some of their covers on The $5.98 E.P.: Garage Days Re-Revisited ("The Small Hours" and "Crash Course in Brain Surgery"),"Dream No More", "The Thing That Should Not Be" and in live performances of "The God That Failed" and "Seek and Destroy"; by Bullet for My Valentine in several songs on Scream Aim Fire, by blink-182 in "Adam's Song", in Doug Anthony All Stars live performances and by John Fogerty.
Solid-body guitars are made with solid sheets of tonewoods that make up the soundboard, back, and sides. Solid tonewoods tend to dry out and age better with time further evolving your music signature as the guitar ages. One such gorgeous solid-body guitar is the Seagull Artist Mosaic Acoustic Guitar that we have done a full review on. You could also see what the Yamaha A3R A-Series Acoustic Electric Guitar sports for a solid-wood body!
It can get a bit difficult trying to properly depict certain aspects of effects pedals to our newer musicians out there since much of music tends to be described in an intangible sort of manner which relies heavily the assumption of prior knowledge and personal tastes which is why we try our best to not get the pros out there the meat of the information they are looking for, but describe it in a way that players of even entry levels can comprehend. So with that in mind, one of the more complex aspects of effects pedals for newer musicians is their implementation of a signal chain.
Portland, OR was probably the place of import, but all the Lyles were 'licensed' copies of Gibson, they weren't seconds. The acoustic guitars were built in Japan, with laminated tops and sides. Over all construction on the guitars was very good for the materials used. I gave my Humminbird copy to my son after playing it for 25 years, and he still plays it today. Unfortunated during that 25 years, I had to have the bridge reset 3 times due to the weakness of the laminated top. My luthier asked me why I didn't just buy a Gibson or a Martin for as much money as I put into repairing that Lyle...I told him the tone was worth the extra expense.
In 2017, Slash was named Gibson Brands' first Global Brand Ambassador. And to celebrate, Slash has designed his first Signature Firebird for Epiphone! Slash's Limited Edition Firebird features the classic Firebird profile that has gone virtually unchanged since its debut in 1963 and is made with a AAA Flame Maple top and a 3-piece Mahogany body in a Translucent Black finish chosen by Slash.
By the way, if you like older Japanese guitars, you must obtain a copy of Mr. Noguchi’s book, ’60s Bizarre Guitars (Guitar Magazine Mooks, Rittor Music). It is lusciously printed in color and, while the text is in Japanese, model names and dates are in English, so it is an invaluable reference tool, as well as a fun coffee table book. Some of the following information on specific guitars comes from this source, as well as catalogs and other research materials kindly provided by dedicated guitar fans in both the U.S. and Japan. It’s virtually impossible to reconstruct a comprehensive chronology, but we will attempt to document some broad-brush details and periods of what guitars we can, and with luck you’ll be able to search out and identify your favorite Teiscos with much greater authority. Your corrections and additions are most welcome!
Guitar tabs (which is short for tablature) is a type of musical notation for stringed instruments that show you which fret to play on each string, as opposed to standard staff notation, which shows you the pitch of a note. Beginner guitarists have a much easier time learning from tablature, but in the long run, it’s a good idea to learn the standard musical notation as well.
You might be playing guitar in a cramped garage or a poky bedroom – but it’ll sound like you’re gigging a cathedral when you step on a quality reverb pedal. Reverb brings a sense of space, depth and drama to even the most basic guitar parts, and as this video shows, few effects deliver more atmosphere for less effort. Using the BOSS RV-5 as our demo model, we’ll show you just how flexible reverb can be, running through key controls that adjust brightness, volume and more. Then, we’ll show how your playing can benefit from three different reverb types, whether that’s the vintage sound of spring reverb, the rock-club chug of room reverb, or the stadium-sized shimmer of hall reverb.
I use the boss me-8 for 15 years, now with the boss me-25 i have the same kick ass sound plus some more effects and customisations, also it comes with a beutifull surprise that i don't even expect, this guiar pedal is also an audio interfase that suport digital audio via USB, is really amazing you will not regret, it doesn't come whit a power supply only batteries, buy one separatly.

A group of blues-crazy Brits even took their name from one of his songs: the Rolling Stones. The blues in general, and the recordings of Muddy Waters in particular, became the “roots music” for the youth counterculture that sprang up in the Sixties. Countless bands, from the Stones on down, have assayed Waters classics like “Rollin’ and Tumblin’,” “Got My Mojo Workin’,” “You Shook Me,” “I Just Wanna Make Love to You” and “Mannish Boy.”

Pitch-shifters work by slicing the incoming audio into extremely short sections (typically a few tens of milliseconds long) and then lengthening each section where the pitch is to be decreased, or shortening each section where the pitch is to be increased. Though cross-fading algorithms and other techniques are used to hide the splice points, most pitch-shifters tend to sound grainy or warbly when used to create large amounts of shift (a couple of semitones or more), though they can sound very natural when used to create subtle detuning effects, using shifts of a few cents. A refinement of the system, designed for use with monophonic sources, attempts to synchronise the splicing process with whole numbers of cycles of the input signal, which makes the whole thing sound a lot smoother but, as soon as you present these devices with chords or other complex sounds, the splices again become audible.
{ "thumbImageID": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal/L20238000003000", "defaultDisplayName": "Ernie Ball Music Man StingRay5 Special HH Ebony Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cruz Teal", "sku": "sku:site51500000222146", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal-1500000222146.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Cruz-Teal/L20238000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Aqua Sparkle", "sku": "sku:site51500000222145", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Aqua-Sparkle-1500000222145.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Aqua-Sparkle/L20238000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Jet Black", "sku": "sku:site51500000222144", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,300.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Jet-Black-1500000222144.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Jet-Black/L20238000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Charcoal Sparkle", "sku": "sku:site51500000216758", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Charcoal-Sparkle-1500000216758.gc", "skuImageId": "StingRay5-Special-HH-Ebony-Fingerboard-Electric-Bass-Charcoal-Sparkle/L20238000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

Where can you find one? My guess is that FIDELITY was a housebrand (like Holiday or Silvertone), and these might be Valcos or some other maker. But I have since seen 2 or 3 of them on Ebay, not going for too much money. Also, there are several other brands (and no-brands) that look much like these, so keep your eyes peeled, don’t pay too much, and score a little gem that will have other guitar players saying “what the hell is that” and have your significant other shaking his or her head when the UPS/Fedex people come knocking.
The slide part on that track was quite difficult to simulate, but again, the guy I have playing in my band, that I've been playing with for a while, can do it, and he and my son are the only two guys I know that play it right. Recently, I had Ronnie Wood playing with me, and he did a good job with it. I think if you have your head on it, it can be done.
First the lower line models were built for steel strings first. Like the style 17 in 1922, and the style 18 in 1924. Pretty much all models were built for steel by 1927-1929. But unfortunately there was no definative serial number or time line for any 1920s Martin style. This makes it difficult to determine if any particular 1920s Martin guitar is really built for steel strings. Martin didn't just implement steel string design at any one definative point. It was a transition, and apparently a very slow transition. And special orders for gut or steel complicated things.
Later, around 1963, rebadged Guyatone and Teisco guitars appeared, both in the U.S. and a few in the U.K., also as Futuramas. That was the beginning of several years of Guyatone-made Kents. The Teiscos seemed to be part of the 1963-64 freshman-class only. After starting with an initial group of both Guyatone and Teisco guitars, the importer seemed to settle on Guyatone as a main supplier.

I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.
The ’62 EG-NT, EG-K and EG-Z were fairly primitive and appear to be leftover from the mid-’50s. The EG-NT had a small rectangular body with the bass side flush with the neck and the treble sticking out a bit to handle the controls. The head was stubby three-and-three with a circle Swan logo sticker and the fingerboard had painted diamond markers. The pickup looks to be the old slotted pickup of the early J-1, but may not be, with volume control. The EG-K was the Teisco version of the Rickenbacker Frying Pan, with a round body and neck with a head wider than the neck. This, too, had the rectangular head with a circle Swan logo. Markers were diamonds, the pickup was the slotted J-1 pickup, with one volume control. The EG-Z had an asymmetrical body with a short width on the bass side and a longer width on the treble side, with diamond markers and the stubby head. This had the old slotted J-1 pickup with volume control.
The Old Standby is another model beloved by generations of harmonica players. Up until the 1990s, this model was a quality instrument made in Germany on a wood comb. Where the Marine Band was the choice of blues players, many country music players such as Charlie McCoy preferred the Old Standby. In the 1990s, Hohner began manufacturing this model in China on a plastic comb with a significant decrease in quality. Among harmonica fans the downgrade remains unpopular.[26]
Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
The most defining feature has got to be the neck. It’s thicker than the standard Strat neck, which gives extra meat to work with when bending those strings. Even the fretboard was designed around this technique, with its narrow frets and flat fretboard. It’s not the cheapest one out there, but Fender Stevie Ray Vaughan Stratocaster is definitely one of the best Strats around.
Unintentional phase cancellation can also occur if a guitar's pickups are wired incorrectly, or if a new pickup installed in the guitar has different magnetic or electric polarity from the one it replaced. To fix this, the pickup's magnetic or electric polarity needs to be reversed (which one exactly depends on the respective polarities of the other pickup(s) and whether or not hum-cancelling combinations are desired). While the latter is usually a small matter of reversing the pickup's hot and ground wires,[24] the former may be more difficult, especially if it requires the magnet(s) to be removed and reinstalled in a different orientation, a process which can damage the pickup and render it unusable if not done carefully.[25] This is the case with most humbuckers. On the other hand, single-coil pickups with magnetic polepieces can simply be repolarised by applying a strong enough external magnetic field.
Using, or not using, some piece of gear doesn’t make a player more genuine, harder, tougher, more real, more natural, or better than players who do. What does make people those things is the honest pursuit of their art, the skills and experience earned from practice and performing, their genuine expression, feeling, and the ability to play something that has an effect on the listener. All of this is MUCH more difficult and real than simply choosing not to use a piece of gear.
Multi-effects pedals and processors come in three basic formats: floor-based units equipped with foot-operated pedals and switches, tabletop units with knobs and switches, and rack-mounted units. Most tabletop and rack-mount units offer foot control options in addition to the knobs, switches, and menus accessible from their control panels. Pedals and footswitches are often user-assignable so that you can instantly engage various effects settings and other presets with a single toe tap.

However, it does give you a good flavour of the Martin and is a very playable plug-in, one of the best ways to see proper guitar emulation in action without paying for it. There are tab and effects options and a keyboard for playing it (we’ll assume if you can play a guitar, you’ll opt for the real thing, anyway). While it is free, we think you’ll be sorely tempted to upgrade, which will set you back $169.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","pageName":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop2":"[mf] shop: amplifiers and effects: amplifiers","prop1":"[mf] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[mf] shop: amplifiers and effects: amplifiers: guitar amplifiers","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] sub category2"}
The strings movement moves the magnetic field creating current in the coil of the pickup. The string does not create the current the movement does. If you placed a solenoid beneath the pickup and moved the pickup you would also create a current in the coil. If you took the strings off the guitar, and held a hammer head over the pickup and activated the solenoid you would get a current in the coil.
Flamenco technique, in the performance of the rasgueado also uses the upstroke of the four fingers and the downstroke of the thumb: the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side. This was also used in a technique of the vihuela called dedillo[40] which has recently begun to be introduced on the classical guitar.
I start at zero and work the bridge, stopbar, neck and pickups from there until I all feels and sounds right, takes some time but not too much. I only do this with new guitars and when I total strip one down maybe once a year. Living in the North East and having 4 season you have to adjust all the time, unless you live in a climate controled home and never go out. If you can do all these adjustments yourself and become one with your guitars I think your way ahead of the game.
With such a vast array of effects available, it can be hard to know where to start. One good way is to find out which effects your favorite players use. Artist interviews can be a great source of such information. Additionally, most players are happy to discuss their gear with fellow musicians. Talk to other guitar players you know, or chat up the guitarists or bassists at the local club before or after their sets.

We've watched Dan Erlewine repair this 1930s Kay over the previous 3 Trade Secrets. It's time to finish it up. Elliot John-Conry of EJC Guitars ages Dan's patch of new plastic binding so it blends in with the old binding around it. About the guitar in this video: This 1930s Kay Deluxe is a fixer-upper that Dan Erlewine repaired in order to sell. Now that it's in great shape again, maybe Dan'll keep it!

First of all, the pickup configuration is getting into the heavy metal side of things and, like the two previous recommendations, it offers a great introduction into changing your sounds on the fly. You know that expert players are constantly stomping on effects pedals to change the tone of the guitar, but they’re also tweaking the pickup positions, tones and volumes to create unique sounds, too.
{"pageName":"[mf] pdp: ibanez dt52 destroyer series electric guitar","reportSuiteIds":"musiciansfriendprod","prop2":"[mf] shop: guitars: electric guitars","prop1":"[mf] shop: guitars","events":"event3,event50,prodView","evar51":"default: united states","prop5":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop6":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop3":"[mf] shop: guitars: electric guitars: solid body electric guitars","prop4":"[mf] shop: guitars: electric guitars: solid body electric guitars","products":";H99039","linkInternalFilters":"javascript:,","channel":"[mf] shop","prop7":"[mf] product detail page"}
The guitar features hand-rubbed solid Sitka Spruce top supported by Martin's incredibly reliable mahogany HPL (high pressure laminate) back and sides, essentially similar to the configuration found on many of Martin's mid-priced acoustics. If you're looking for an affordable starting instrument that has big-brand backing, or you are looking to get into the parlor-style guitar trend, check out the LX1E Little Martin.
Lydia Lunch once beat her Teenage Jesus & the Jerks bandmates with coat hangers during practice; and her confrontational attitude was only matched by her completely unfettered guitar playing. Calling the instrument “a grand assaultive weapon,” she treated it as such, often attacking the strings with knives or even shards of glass, refusing to even bother learning chords, using it as a blunt force to express a total anti-pop, anti-punk, anti-everything rage.
Two solidstate Tempo beginner amps were offered in ’71. These had black tolex covers, front-mounted controls and a rectangular logo with block letters on the grille. The Tempo No. 158 ($65) had an 8″ speaker, 10 watts of power, tremolo with speed control, reverb with depth control, three inputs, volume, tone and a black grillcloth surrounded by white beading. The Tempo No. 136 ($31.50) offered a 6″ speaker, six watts, three inputs, volume and tone. The grillcloth was dark (probably black) with horizontal flecks.
There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."
Bold and brash, the chest-thumping sound of Fender's big-bodied California Series Redondo Player acoustic-electric was designed to inspire you from the moment you pick it up. The exclusive slope-shouldered Redondo body shape has a rich, commanding voice that fills any room. The gloss metallic top, back and sides, as well as a matching painted 6-in-line headstock and creme binding, give it a shot of electrifying attitude. Dynamic, unique and unconventional—like today’s guitarists—the Redondo Player refuses to be bound by the past.
Little Martin: Designed around a modified O-14 fret body, the Little Martin series is built at a smaller 23″ scale length. With the exception of the LX1 and LX1E, which both have solid Sitka spruce tops, Little Martin series guitars are constructed with HPL top, back, and sides. Recent models incorporate a greater amount of synthetic materials, such as Stratabondnecks and Micarta (as opposed to rosewood or morado) fretboards and bridges. The guitars employ Modified X-Series “X” bracing, reinforced by a bowtie plate made of graphite. Little Martin series guitars do not havepickguards or fretboard inlays.
Les Paul created an early solid-body electric guitar in his spare time after work at the Epiphone factory in the early 1940's famously known as "The Log". It is believed that this was the first solidbody 'Spanish guitar' every built. He went on to develop the idea further until he took it to managers at Gibson sometime in 1945 or 1946 who immediately...
I was just old enough to catch the tail end, but many folks remember the days of the record store.  Large vinyl albums, huge artwork, leafing through the stacks….it was a cool time that lasted longer than the days of cassettes, 8-tracks, and CDs.  Nowadays, most music buying is relegated to the online variety.  But there was a time during the 1960s where record stores were THE place to get your music, and musical instruments!That’s right, in window displays or hanging above the stacks of vinyl, guitars like these were waiting for teenagers.  Again, just a cool time!  This Decca guitar was sold through Decca Record stores.  In early 1966, Decca Records jumped into the electric guitar frenzy.  This was around the same time when CBS has bought Fender and only a few years away from MCA buying Danelectro. Curiously enough, Decca Records was a subsidiary of MCA.Anyway, Decca and many other companies saw the potential profits of electric guitar sales and quickly tried to capitalize.  There was a whole line of guitars, amps, and accessories, all imported from Japan.  The entire instrument line was handled through Decca’s 21 branches and distributors throughout the USA, but the company seemed to concentrate on the east and west coasts.  There was also a Decca subsidiary in Canada as well.This particular guitar was made by Kawai, and featured a design that was semi-exclusive to Decca.  Kawai was producing and exporting thousands of guitar to the USA at this time, and Kawai’s prices were very competitive, but Decca decided to go with an (as of this writing) smaller, unknown Japanese company to produce the guitars.  Many of the Decca electrics featured non-adjustable truss rods and just seemed to always be on the “cheap” end.  But some of the them did sound very good.  Sometimes you’ll see some really odd Decca electrics that literally copied the Teisco look from the same time period.  There were also some cool hollow bodies with set neck designs as well as the late 60s  line of guitars, like the DMI 231 pictured below.
Because in most cases it is desirable to isolate coil-wound pickups from the unintended sound of internal vibration of loose coil windings, a guitar's magnetic pickups are normally embedded or "potted" in wax, lacquer, or epoxy to prevent the pickup from producing a microphonic effect. Because of their natural inductive qualities, all magnetic pickups tend to pick up ambient, usually unwanted electromagnetic interference or EMI.[23] The resulting hum is particularly strong with single-coil pickups, and it is aggravated by the fact that many vintage guitars are insufficiently shielded against electromagnetic interference. The most common source is 50- or 60-Hz hum from power transmission systems (house wiring, etc.). Since nearly all amplifiers and audio equipment associated with electric guitars must be plugged in, it is a continuing technical challenge to reduce or eliminate unwanted hum.[24]