In 1970, B.B. crossed over to the white rock audience with “The Thrill Is Gone.” In 1988, he virtually repeated the trick when he recorded “When Love Comes to Town” with U2. Always the humble student of the instrument, B.B. King became jazzier and better than ever as his life and career continued well into the new century. His loss earlier this year was deeply felt by the music community and, particularly, by the guitarist he influenced.

The intonation here refers to the forward/backward position of the individual string saddles. By moving the saddles forwards or backwards, we are actually adjusting the length of the strings. Without going into too much detail, if the string is the wrong length, the positions of the frets will not be correct and the guitar will be out of tune on some of them. Adjusting the intonation is not difficult. All you need is a guitar tuner and a tool to move the saddles forwards or backwards. Play an open low E string and make sure it is in tune (using the guitar tuner).
Artist Studies are available that explain the specific playing style of a guitar hero or band like Van Halen, Albert King, AC/DC, B.B. King, Chet Atkins, Iron Maiden, David Gilmour, Eric Johnson, Freddie King, George Lynch, Jack Johnson, Jeff Beck, Jimi Hendrix, Joe Pass, John Prine, Keith Richards, Metallica, Megadeth, Randy Rhoads, Ritchie Blackmore, The Edge, Tony Rice, Wes Montgomery
From the 1860s on, fan bracing became standard in Europe. Martin and other American builders including Washburn and others since forgotten (Schmidt & Maul, Stumcke, Tilton) used X-bracing instead.[3] The sound of X-bracing may be considered less delicate with gut strings, but it prepared the American guitar for steel strings, which emerged in the first quarter of the 20th century.
What started as a simple string and pedal sales catalog has grown exponentially over the past thirty years. The early days were a time where catalogs didn't have much of a presence in the industry, but what began as a college dorm room operation grew rapidly. In 1986 we moved to a full product offering and 64-page catalog, which over the years has grown to 162 pages. Join the AMS family and get your free catalog now!

Most of these sites offer 'free' TAB, chord sheets, and lyrics. A few provide versions that are endorsed by they musician, the writer, or the company that owns the rights to the song (i.e., a licensed site). There is always a fee for access to the licensed TAB or music notation. There are even some unofficial sites that will charge a 'membership fee'.

During the 1930s and 1940s several companies tried to produce a solid-body electric but none of them were commercially successful. Then Leo Fender released his design in 1950 with a single pickup under the name Esquire, then added a second pickup and sold it under the name Broadcaster but soon had to change it due to a lawsuit from Gretsch who were already selling a drum kit using that name. Thus the "Tele" as we know it today was born.
This cutoff is based on the average used price on Reverb over the past year, and while the $1000 cutoff is relatively arbitrary, it is as good a point as any to divide between entry-level gear and more heavy artillery. Here again, we are not combining wattage and cabinet size variations on the same models, which inherently decreases the ranking of any amp series with a multitude of different configurations.
The descriptions that follow are very broad, but if you look around the guitar world you can usually pin any solid-body guitar down to one of these general categories. Of course you’ll see wild shapes like the Gibson Flying V, Ibanez Destroyer, Dean ML and Jackson Rhoads. They may look like they’re from another planet, but if you check their specs you’ll see they follow the same basic design principles as any other solid-body electric guitar.
Hey thanks soo much this really helps! Im a 15 year old girl and an intermediate guitar player but not too long ago a beginner, and i think as well my beginner guitar is holding me back from doing alot. I was wondering if there are any cheaper guitar brands with still a nice quality that you can get with expensive guitars because i have like no money. Also, do you have any recommendations on new amps or any posts about that?im also getting quite sick of my amp which is an ibanez with almost no nobs to mess around with, and my instructor says my amp is holding me back as well.
An excerpt: “First let us dispel the popular, but completely wrong belief that ‘any guitar will do for learning to play.’ Your first guitar should be carefully chosen to be fairly easy to play and tune. It should also be versatile enough for you to be able to play different kinds of music on it. For this reason, and to avoid the complications and expense of an amplifier, an ‘acoustic’ (un-amplified) guitar is recommended.”

For more control and fine tuning of your sound, you may want to use a parametric or graphic EQ. A parametric EQ allows you to adjust the width of the frequency band that's being altered and the shape of the curve—how abruptly the boosted or cut area changes to the unmodified area. A graphic EQ divides the frequency ranges into a number of narrow bands which can each be boosted or lowered by sliders, thus giving you a visual or "graphic" representation of how the EQ is being affected. The more bands there are, the more precise your adjustments can be.

This can all get a little tricky and can become overwhelming especially if you have never tackled this type of job before. If this is the case, I strongly suggest starting with one of the easier models in regards to wiring e.g. Telecasters are significantly easier to work on as the scratchplate will often be pre-loaded with pickups. However, if you purchase a kit guitar such as an LP or you want to upgrade your electrical components (which is often the case with an entry level kit) understanding some basics about guitar electronics is useful.

The sounds of the electric guitar made it to outer space. In 1977, both Voyager 1 and Voyager 2 were launched into space with remnants of international life and culture onboard. On each vessel was a gold-plated phonograph record with 115 sounds and images curated by a team led by astronomer Carl Sagan. Along with selections that included the likes of Bach and Beethoven, Sagan decided to throw in – however controversial it was at the time – Johnny B Goode by Chuck Berry, an American rock’n’roll anthem defined by its rollicking electric guitar lick.

If the fuzz is the grandaddy, the Arbiter/England Fuzz Face (introduced 1966) is the grand-poobah of the grandaddies’ social club. A handful of other fuzzes came first, but this distinctive round, smiling box is the one most guitarists point to when identifying the fuzz tone of the gods. Why? Two words: Jimi Hendrix. Apparently he died and took it up there with him. Oh, and two other words: germanium transistors. When these fuzz fans point to the Fuzz Face, however, they don’t point to just any Fuzz Face. They point to a good one. The quality of these pedals varies wildly, mainly because the tolerances of germanium transistors themselves varies wildly and sorting out the good ones was more work than the makers could afford to put in (or, perhaps, knew was necessary). Contemporary makers from Fulltone to Z.Vex to Mayer take the time and trouble to laboriously sort their germanium transistors, and it pays in spades in terms of tone and consistency.

The short-lived Elite Telecaster of 1983 incorporated two specially designed humbucking pickups powered by an active circuitry that featured a “TBX” guitar expander and an MDX midrange booster with 12 dB of gain. Other features included a “Freeflyte” hardtail bridge and die-cast tuning machines with pearloid buttons. This guitar was among the latest CBS-era Fenders to feature a BiFlex truss-rod system, low-friction EasyGlider string trees and active electronics. After CBS sold Fender to a group of employees led by Bill C. Schultz in 1985, production ceased on the Elite Telecaster and other Elite models. Fender Japan made its own version of the Elite Telecaster in late 1984, which featured a 22-fret neck with medium-jumbo fretwire and a modern 9.5 inch fingerboard radius. Notable Elite Telecaster players include Johnny Hallyday and Dave Davies of The Kinks. Michael Houser w/ Widespread Panic and Andy Summers of The Police.
Additionally, George Harrison used a custom-built rosewood Telecaster during the recording sessions for The Beatles‘ Let It Be album (including the rooftop concert), played through aLeslie speaker; Big Twist and the Mellow Fellows guitarist Pete Special frequently had reissue of Harrison’s Tele onstage in the mid-1980s, but rarely played it. Pearl Jam singer and guitarist Eddie Vedder has been known to use a custom black Telecaster with a white pickguard containing a black arrow decal pointing towards a target design under the strings. Guitar virtuoso Chet Atkins, known for the variety of acoustic and electric guitars that he used, occasionally played a Telecaster in his duets with Jerry Reed.[6]
I’ve used Eagle for a long time, but I just recently started using Circuit Maker, and I like it so far. I’ll probably end up using both since I do most of my work on a Mac, and Eagle still works fine on that. I had to set up a dedicated Windows machine for Circuit Maker. Circuit Maker has a 3D view of the finished PCB which is a very helpful tool if you are dealing with odd board sizes and very constrained layouts.

One thing that is worth trying is combining different delays with different reverb effects. You can get some seriously beautiful sounds with a reverb and delay effect that sound good together. Some manufacturers have even gone so far as to create reverb and delay combo pedals. It is truly a perfect combination of effects, kind of like peanut butter and jelly.
It’s now time for the most challenging step: fitting everything back into the guitar. Don’t worry: if you did everything correctly up to this point, you shouldn’t have any problems getting it back together. You’ll be using extra wire to pull the electronic parts through the F hole and into their mounting holes on the body. It’s best to start with the component that’s furthest from the F hole, which is usually the jack.
After reading through Teach Yourself to Play Guitar, my opinion is that if you are giving a guitar as a gift to someone, this might be an OK book to accompany that. If you wanted to spend a bit more, or are looking for a book for yourself, I would go with the 2nd book reviewed below, the Guitar for Dummies book. It has online video and audio demos, and hearing what you should be playing helps when learning music... 😉
More expensive amplifiers may have a patch bay for multiple inputs and outputs, such as a pre-amp out (for sending to another guitar amplifier), a second low gain input, to use with active basses, an in jack to create an effects loop (when used with the pre-amp out jack), an external speaker output (for powering an additional speaker cabinet), and stereo RCA jacks or an 1/8" jack, for connecting a CD player or MP3 player so that a player can practice along with recorded music. Some amps have a 1/4" jack for connecting a pedal to turn the amp's onboard overdrive and reverb on and off or to switch between channels. Some amps have an XLR jack for a microphone, either for the guitar amp to be used for singing (in effect as a mini-PA system), or, for acoustic guitar, to mix a mic signal with a pickup signal.

Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0-8223-1265-4. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
This study proposes a systematic approach for modelling and three-axis CNC milling of solid wood parts used in stringed electric musical instruments, mainly in electric guitars and basses, through CAD/CAM technology. Design and manufacturing philosophy undertakes particular characteristics of tonal woods, so as to produce high-quality resonant musical instrument parts with high accuracy. To do so, it is crucial to identify design features and to apply the appropriate machining strategies and parameter values based on obtained knowledge, as these have a great impact on both the acoustic characteristics of the parts and on the total appearance of the instrument, thus making it more appealing in a competitive market. Customization of musical instruments is well received among professional musicians who wish to stand out during their performance, as well as to own an instrument of uniquely original shape and sonic properties. Keeping custom instruments cost reasonable is a challenge, unless the overall production is systematic and modular. The proposed approach was developed and tested on a custom solid electric guitar, which was then finished and assembled with off-the-shelf components to form a great looking and sounding electric guitar.
{ "thumbImageID": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "defaultDisplayName": "D'Angelico Excel Series EX-SS Semi-Hollowbody Electric Guitar with Black Hardware", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51438957997383", "price": "1,699.00", "regularPrice": "1,699.00", "msrpPrice": "2,629.99", "priceVisibility": "1", "skuUrl": "/DAngelico/Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black-1438957997383.gc", "skuImageId": "Excel-Series-EX-SS-Semi-Hollowbody-Electric-Guitar-with-Black-Hardware-Black/L10403000001000", "brandName": "D'Angelico", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: univox","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","evar51":"default: united states","prop10":"brands","prop11":"rickenbacker","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}

The Line 6 Spider IV is a good option for beginners not entirely sure what they are looking for. The amp models and effects allow it to achieve a wide variety of tones that are appropriate for almost any style of music. The Killer Ant and Hot Rod Pro Junior III do have better tones, but both are more expensive and less versatile. The Line 6 Spider IV is good for guitarists that want to be able to try a bunch of different sounds until they find something they like. It’s a very solid choice for any style of guitarist.

A lot of amps, especially in higher price ranges, have a lot of effects and features. They catch an eye and are pretty fascinating, but in a lot of cases, they are … useless. Well, not all of them but I am pretty sure that if an amp has a hundred different features you won’t be using all of them or even half of them. Features on amps are like the stand at the registrar of a grocery shop. They just catch an eye and you want WANT WANT them (for no other reason than it is interesting and cool looking)! Well, if you are going for an amp is the $100 price range you won’t have as much luxury or freedom to choose from a lot of features. Most practice amps are pretty standard and basic (in the best of ways). And to be honest, I don’t think as a beginner you really need a lot more than the basic effects and functions.
If you are looking into a list of the best guitar practice amps chances are you plan on practicing… a lot. The chances are also high that you are a beginner and the idea of getting yourself into this unknown yet fascinating world is somewhat confusing. While figuring out which guitar you want is a big step forward the next step is not that much easier. You got to find a good amplifier. The market is full of all kinds of amplifiers. Starting from tube amps over $2000 for pre-level players and going down to amplifiers under $100. And yes, maybe $100 amps are not the highest in quality but they do the job, especially if you have done your research.
The wonders of digital delay arrived on the pedalboard in the early 1980s with what seemed massive capabilities of long delays, clean signal reproductions, and the endless fun of one, two, or up to 16 seconds of looping delay. In many cases, in the early days, reproductions weren’t really all that clean (or were cleaner than analog, but colder and harsher too), and many delays were prone to digital distortion if pushed, or poor resolution on the decay of the signal. Even so, the techno-power of the new technology stamped all over the bones of the old analog delay units, and for a time threatened to bury them entirely.

This is a type of electronic amplifier that uses vacuum tubes to increase the amplitude or power of a signal as opposed to using transistors. A vast majority of vintage guitar amplifiers use tubes, which help to give them a warmer, sweeter tone. They are available in combo amps and in amp heads, which then require an external speaker cabinet to produce sound.

Tokai was founded in 1947 and is based in Hamamatsu, Japan. Tokai began production of acoustic guitars in 1965 and by 1968 was producing electric guitars for the American market. Tokai still exists as guitar manufacturer. Tokai made guitars for Fernandes, Mosrite and Fender Japan. Tokai badged guitars included the house brand Tokai as well as Cat's Eyes, Conrad, Drifter, Hondo, Love Rock, Mosrite, Sigma and Silver Star. Possible badges include Artist Ltd., Gaban, Gallan, Gession and Robin. It's suggested that Tokai made Hummingbird acoustics as well, but if these were related to those made by Humming Bird I haven't quite sorted out yet.
While the bulk of new players will likely want an amplifier for their electric guitars, acoustic-driven music is still plenty popular amongst players of all skills. And while acoustics are fairly loud on their own, some players still want to pump up the volume from time to time, as well as shape their sound. And you can do all that without sacrificing the warmth of your guitar’s sound with the Behringer Ultracoustic AT108. Perfect for home practices and coffee shop performances, this amp was specifically designed to enhance the volume and tones of an acoustic guitar (or, more accurately, an acoustic-electric). It also has a secondary microphone input to amplify your voice alongside your guitar.
Even apparently crude solutions can produce useful results. For example, I was recording at a friend's flat many years ago and the amp I had only sounded any good when it was played flat out. The answer was to place the speaker cabinet on its back, place the mic right up against the grill, then cover the whole thing with blankets, sleeping bags and anything else that came to hand. It made the level in the room far more tolerable yet still produced the sound I wanted!
First off, in any discussions about any effect pedals, no one is asking for or cares the slightest about the opinion of people who categorically don’t like pedals. While the Internet is a wonderful medium that expedites the broadcasting of a personal opinion (as I am doing here), I’m always curious about what motivates the person who categorically dislikes something to show up uninvited to express their feelings. Imagine you start a chat thread or post a status update or tweet with something like “Those of you who’ve seen The Avengers – how did you like Mark Ruffalo as Bruce Banner/Hulk?”. Now imagine you get a reply such as “I didn’t see The Avengers because I think movies suck. People should get back to reading books” – excuse me, but what on earth is that person contributing towards the discussion, and who the hell asked them?

To make a long story short, I ordered from Amazon two Epiphone EJ-200SCE guitars, Color: one Natural, one Black and the Hummingbird Ephiphone. My wife liked the black one. I liked the natural one. We decided to compare the two side by side, and sent for both of them. Later, my wife changed her mind and liked the way the natural looked and sounded. I had just listened to the Andertons review "What ones are the best, the ten times more expensive J 200 Gibson or the ten times more expensive Hummingbird Gibson comparing to the similar Epiphone EJ-200SCE and the Hummingbird Epiphone.
On my guitar, the bridge plate is held on by five screws. Three on the back of the plate, two towards the neck on the front. You may need to remove the intonation block things.One or all. If you decide to take any off, use your calipers and measure from the front of them to the back of the bridge plate, so that you don't lose your intonation. Mark each saddle like in the picture.

Rosewood back and sides, abalone (pearl) inlay around top edge and soundhole (but not on top around the fingerboard like a style 41,42,45 would have), inlaid bridge pins. Fancy backstripe of horizontal lines between two rows of diagonal lines (like style 45). Most style 40 models made were hawaiian style with flat fingerboard radius, flat flush frets, high string action, and no bridge saddle compensation. Most popular was the OO-40H (though they did made 2-40, 0-40, 000-40 and 000-40H models prior to WW2). Sometimes these are converted to regular "spanish" style guitar (fingerboard radiused, refretted, neck reset, bridge saddle angled). Made from the 1860s to 1917, then 1928 to 1941, then 1985 to present.

{ "thumbImageID": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard/H76500000002001", "defaultDisplayName": "Fender Standard Stratocaster Left Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black Rosewood Fretboard", "sku": "sku:site51310681124974", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard-1310681124974.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Black-Rosewood-Fretboard/H76500000002001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Brown Sunburst Rosewood Fretboard", "sku": "sku:site51310681124976", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Rosewood-Fretboard-1310681124976.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Brown-Sunburst-Rosewood-Fretboard/H76500000004001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Lake Placid Blue Rosewood Fretboard", "sku": "sku:site51310681124973", "price": "524.99", "regularPrice": "524.99", "msrpPrice": "525.01", "priceVisibility": "1", "skuUrl": "/Fender/Standard-Stratocaster-Left-Handed-Electric-Guitar-Lake-Placid-Blue-Rosewood-Fretboard-1310681124973.gc", "skuImageId": "Standard-Stratocaster-Left-Handed-Electric-Guitar-Lake-Placid-Blue-Rosewood-Fretboard/H76500000001001", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
What Fender might lack in heavy, modernized features, it makes up for in affordability, novelty and being some of the best all-around guitars in existence. They would also have to be considered some of the most stylistically versatile guitars, covering all kinds of musical genres and songs. We’ll focus primarily on the Standard (non-American) models, since they’re priced below our $700 cut off. If you want to go with something nicer, target the American series Strats and Teles.
The Fender Stratocaster is one of the most iconic electric guitars in music history, and its equally distinctive sound is down to its selection of pickups. Although you’ll occasionally find a humbucker, traditionally a Strat will feature three single-coils – one each at the bridge, middle, and neck positions. They offer that sweet, bright, chiming single-coil sound that’s perfect for all styles of soulful music – from blues and country, to classic rock – and are perfect for lead guitarists, as they slice through even the densest mix. There are some excellent Stratocaster pickup sets around, although be sure to check out the Lace Sensor Blue-Silver-Red set on our chart for something with a little extra edge.
The Pro Series DK2 is a rugged, performance-grade workhorse that’ll do just as well on the stage as in the studio. It has a lightweight okoume body—a tonewood that shares many qualities with mahogany—as well as Jackson’s fast maple ‘speed neck,’ a compound radius ebony fretboard and 24 jumbo frets. A recessed Floyd Rose 1000 double-locking trem system completes the shred-friendly features on the guitar.

While relatively new compared to many established brands on the market, Seagull has managed to gain traction in the past few decades. Started in Canada in 1982, the company focuses on building high-quality acoustic and acoustic-electric guitars. These usually use solid tops rather than laminated tops, resulting in crystal-clear sounds and superior quality.

I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say. He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston. It's rare to see any establishment get 5 stars from so many people and Steve deserves it! Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC. Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!
Reliability is one of these. There are many different parts to an electric guitar. In addition to the body and neck being put together solidly, there are the components to consider. The pickups, controls, circuitry and output jack all need to be well made and connected securely, while the bridge and tuners should function correctly, with nothing too loose or too stiff.
For rehearsals, studio recording sessions, or small club performances, electric and upright bass players typically use a "combo" amplifier, which combines a preamplifier, tone controls, a power amplifier and a speaker (or multiple speakers) in a single cabinet. Combo amps come in a variety of speaker configurations, such as one speaker (e.g., often one 12" speaker or one 15" speaker, although there are some micro-amps with one 10" speaker) or two speakers (e.g., two 10" speakers) or four speakers (e.g., four 10" speakers). The dividing line between practice amps and combo amps that can be used for live venue shows is described in the power in watts section. The most powerful combo amps available deliver between 800 and 1000 watts to the internal speakers.
Great guitar at this price point. Want to make it better? For so little money you can add lighter strings, a bone saddle, bone nut and pins. It's not necessary but they may help some. A bunch of small improvements put together make a big difference. What really does make a difference is having the action set up properly. Lowering it made it much easier to play for me. The finish and craftsmanship on this guitar is excellent.

There is no way to indicate strumming patterns or the duration of notes. Take our examples above. If you know these two songs, you can quickly figure out how to play these passages. But imagine that you don't know them. How long do you hold the C chord at the beginning of Silent Night? How long do you play the notes for Day Tripper? The only indication in Silent Night is the inclusion of lyrics. For Day Tripper, the distance between the numbers gives you minimal information about note duration, but you could never reproduce the riff if you didn't hear someone else play it.
It’s curious to note that also tauted in the ’39 Grossman catalog was the National Res-O-Lectric Pick-up Unit, designed to be added to National and Dobro amplifying guitars. This was not sold as an accessory, but had to be factory-installed for $25. On single-cone guitars, the bridge assembly/cover was replaced with the pickup assembly, faced in gloss black Ebonoid. On tricone guitars the pickup would be built in to the silver cover. It’s not clear if these were also mid-’37 developments or if they appeared closer to the ’39 Grossman catalog publication date.

Guitar players who haven't done much recording tend to comment that the sound coming back over the studio monitors isn't the same as what they hear when standing in front of their amp at a gig. This is hardly surprising, since studios seldom monitor at that kind of level, so the question they should be asking is whether the sound you hear over the monitors is comparable with the guitar sounds heard on similar records.

However, John Leckie states an interesting preference for an SM58 and U67 rig instead: "SM57s tend to be that little bit brighter than the SM58, which really isn't what you want when you're miking up an electric guitar amp. You really want to pick up a flat signal, an 'unstimulated' signal I suppose is the word... The U67 gives you the warmth and a broader sound."

A far cry from just another mass produced vintage looking guitar, the Kay Vintage Reissue Series successfully duplicates the original 50's models, within feel, playability and the legendary Kay sound. Complete with the company's gold chevron, flagship headstock design, displaying 3-D raised "Kel-von-a-tor" style emblem, to this day, the Kay Thin Twin Electric Guitar is probably one of the coolest looking guitars ever made.

Wiring the phase switch is fairly simple. Solder 2 wires in the criss-cross manner shown in the diagram. In the guitar cavity, unsolder the 2 bridge pickup leads; solder the phase switch "Out" leads to the exact same spot where the pickup leads were; solder the bridge pickup leads to the "From Pickup" terminals on the phase switch. Mount the switch, close up the guitar and start enjoying the new sound you just created!
Peerless hollowbody guitars are excellent at this price range. Both of these brands manufacture from factories in South Korea. PRS SE is made by World Instruments Co. and they have consistently high standards - all brands made in this factory will be exceptional. Peerless is a company which used to manufacture high end guitars for other brands such as Gretsch and Gibson, and then launched their own brand. They are exceptionally good guitars.
The only reason why anyone likes Ibanez is because it's cheap. When you're ready to buy a real axe, get a Jackson. Ibanez is not a "shredder" brand, it is a budget brand, just like Carvin. Jackson has it all: great sound, great feel, great looks, great for shredding! I'll admit because Rich makes some interesting looking guitars, but Jacksons are still cooler (if you've ever seen a Kelly, I'm sure you'll agree). Jackson For the Win!
A. Many professional musicians invest thousands of dollars in high-end guitars made from expensive and rare tonewoods. A $100 student guitar made from spruce is not going to produce that level of tonality regardless of the player’s skill level. As a beginner, your main focus should be on skills such as chord formation, fretting techniques, and basic scales. Improving tonality and performance are long-term goals.
The far mic will give you a bigger, more heavy-metal type of sound with a more pronounced bottom end on it. The reason for that is low end sound waves take much more distance to fully develop than high end waves. Someone once told me that a low E note on a bass guitar takes thirty-three feet to fully develop. Whether or not that is true will only be known by people who have enough time on their hands to calculate such things. I do know that if you take a tuning fork that's vibrating with a high note and stick it in the imaginary puddle of water, it will generate waves that are small in comparison, and closer together than what a low note will make. Simple physics.
Line 6 gets a bad rap amongst the guitar community, due to the fact that they apparently operate on a ‘quantity over quality’ business model. The truth is, however, their digital modeling tech has improved vastly since that reputation stuck and they definitely deserve renewed consideration. And that’s all the more true when it comes to beginning players. As you’d likely be learning how to play songs by your favorite artists, this amp with its massive array of presets (128 to be exact) will allow you to mimic your idols with little, if any, effort. And, honestly, it’ll sound pretty great. It even has a built-in tuner, metronome to keep you on time, and real drummer loops so you can get in the swing of playing live.

PRS McCarty 594 Electric Guitar The PRS McCarty 594 is a vintage-inspired electric guitar with plenty of premium appointments such as a . It’s part of the Core Electric Series, the company’s lineup of high-end guitars. This means that the McCarty 594 has all the bells and whistles you can expect from a premium instrument. For pro musicians, this is an investment worth every penny.
The Basic Principles: A Valve is an extension of the light bulb. Theoretically inside the valve is a vacuum. The hot filament is called ‘Cathode’ (Let’s not forget a T.V. is a’ Cathode ray tube’ ). Around the outside of the Cathode is a cylindrical metal tube called ‘Anode’. When a +Voltage is placed on the Anode and a -Voltage placed on the Cathode, a large current can flow between them, but not the other way around.
Distortion and overdrive: In the early days of electronic music, vacuum tube amplifiers were used for processing the output electrical signals. Like any amplifier, these tube amplifiers had a maximum amplification above which they began to clip the peaks of the waveforms. While the resulting distortion may have disturbed the electrical engineers, a substantial fraction of the musicians liked the distorted sound and it became part of the musical medium.
Because overdrive and distortion add a lot of high frequency harmonics to the signal they will quickly muddy up the sound if a large number of notes are struck simultaneously. i.e. full open chords and full barres don't work with overdrive, they muddy up. What you play are simple forms, generally no more than three notes simultaneously. For example an "A" power chord is (high E to low E)
Even with tone control maxed some high frequencies get cut. To let all the frequencies through you can either get a no-load pot or make one. CTS makes them for Fender and what they do is simply break the connection between the wiper and conductive element when pot is maxed. Additionally, they have an indentation so once they reach maximum setting they “click” and it’s not that easy to turn them back. To make your own just cut (or cover with nail polish) the element near the end, so that resistance between the wiper and the opposite lug reads infinite when maxed, at lower settings it should read as usual.
I had this guitar handed down to me. It is in pretty rough shape. I think it is in good enough shape to restore to good condition/used shape. Before I attempt such a thing I would like to know more about the guitar itself. I know the history of Lyle and "Lawsuit" guitars so that part is done. The body has a cherry red finish with 2 "f" openings. The neck has had some stress on it, enough to have the wood lift a little on its grain pattern about 2 inches long from the nut to the fret board. I am not sure if injecting glue into this will keep the neck from breaking in the future. The fret board is loose at the nut but I believe I can glue it again. This is not the first restoration I have done. I have restored a flute and a grenadilla wood clarinet. Any comments regarding how to or if I am wasting my time will be welcome.

The implementation of musical chords on guitars depends on the tuning. Since standard tuning is most commonly used, expositions of guitar chords emphasize the implementation of musical chords on guitars with standard tuning. The implementation of chords using particular tunings is a defining part of the literature on guitar chords, which is omitted in the abstract musical-theory of chords for all instruments.
Additional mics can be used to capture different tones from the amp and/or some ambient room sound. When recording open-backed cabinets, great results can be obtained by using a second mic at the rear of the cab. When this technique is employed, it’s wise to invert the phase on one of the channels. To create a sound that’s larger than life, try recording a part with close and distant mics and pan the two channels, then repeat the process, panning the channels in the opposite direction. Two close mics pointing at different parts of the speaker – one dead-centre and the other towards the far edge – will pick up the full range of the speaker’s tone.
This setup is the same as the first one above, however, the volume pedal has been placed near the end of the chain right before the delay and reverb effects.  This allows you to have full control of the volume of your signal right before the delay and reverb effects. This is useful for fading in a fully overdriven signal without cleaning up the signal at the lower range of the sweep.
Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: .

If you are a beginner then you probably don't know what a ‘floating tremolo' is. Have a look at Floyd Rose, who made the first models. If you are looking at a guitar that has little tuners on the bridge, then it's probably a floating tremolo. For a beginner, they are a total pain in the butt. They are very hard to tune and a real pain to change strings. The cheaper ones go out of tune a lot too. If you know why you want one, then fine, but locking tremolos on budget instruments are usually rubbish, so stay clear of those for now!
SquareTrade Protection Plans are only valid for new or Amazon certified refurbished products purchased at Amazon in the last 30 days. By purchasing this Protection Plan you agree to the Protection Plan Terms & Conditions ( Your Protection Plan Terms & Conditions will be delivered via email within 24 hours of purchase
It depends on what purpose the noise suppressor will fulfill. You may need more than one placement depending on your purpose. If you position it behind the tuner, it will remove any unwanted noise from the guitar signal before it gets modified with the pedals (this is the most common placement). Guitarists also use the noise suppressor or noise gate pedals after an overdrive to cut the riff sharply.
We have already covered one Behringer reverb, which was the epitome of affordable and functional simplicity. However, this brand has a couple more aces up their sleeve, including the more advanced RV600 (click for full review). What this pedal offers is a significantly more versatile solution that brings you additional flexibility at a bargain price.
{"product":{"id":"113469598","stock":"instock","price":"539.99","name":"1960s K300 Solid Body Electric Guitar","download":false,"sku_id":"113469598","checksum":"234720911023","rep_id":"site5113469598","displayId":"113469598","sku_display_id":"113469598","sku_rep_id":"site5113469598","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}

Lastly, we have guitars which combine the two systems and have both the piezoelectric pickup as well as a microphone in the sound box. Both of these sources are fed into a preamp, which often allows you to choose the source of the sound. Not only that, but you can also blend the two together to average out the benefits of both types while minimizing the negatives.
The size and shape of the ME-80 is comparable to the Line 6 POD HD500X, though the Boss measures a few inches smaller, and also weighs a few lbs less. This is a Boss product, and as such it’s built like a tank. No worries whatsoever over the build quality of the chassis, knobs, and footswitches. Starting with the rear of the ME-80, you can see the I/O is pretty basic - mono input for your guitar, stereo output, a headphones jack, AUX in (so you can plug in your iPhone and jam along to your favorite tracks), and a USB port. Like the Zoom G3X and the Line 6 POD HD500X, you can use the Boss ME-80 as a USB interface for your computer and record your guitar straight into your favorite DAW. Oh and one small inconvenience is that you’ll need to buy the power supply separately. Why Boss doesn’t just include one for a unit of this quality and price, we don't really understand. If you do end up getting the ME-80, this is the power adapter you want. It can also use 6 AA batteries which is good if you need to use this on-the-go, but we don’t recommend it as it will suck those batteries dry in no time.
Being relatively new to the ABQ area, I've been checking out the local music shops and finding myself underwhelmed - that is until I walked into Grumpy's. Kevin is probably the last honest guy in the business. His pricing is more than fair - whether you're looking for repairs, custom builds, or gear - and he's more than willing to dispense advice or talk shop (not to mention his sense of humor). To put it succinctly; he knows his shit and doesn't blow smoke up one's ass! Sure, the shop doesn't have the "selection" that a place like GC might have, but Kevin can probably get anything you need. (Besides, what's more important - knowledgeable, down-to-earth customer service at a locally owned shop, or being ignored by douchebag wankers who came of age playing along to Miley Cyrus?!) Go to Grumpy's!

Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
Establishing a guitar school in New York requires competing with the highest concentration of possible distractions. This book follows a step-by-step method for identifying the essentials, but also details practice plans and highlights how to practice. Everyone will keep shouting about how you’ll need to practice hours upon hours a day to become even a serviceable guitarist, but advice on just how will be scarce. I took lessons for years and even I don’t remember how my teacher told me to practice. This book will lead you through a progression from the absolute basics to complicated song construction. My only quibble with this book is that it suggests that A minor is the saddest chord, when it is, in fact, D minor.

top 5...Top 5!...I had recently bought a gaming console after not owning one since the ps2 so not the biggest gamer but getting into it again has been fun when there free time to waste ha overall it's a pretty good game haven't stopped playing it just need to finish it up to continue the side story...What I'm disappointed is with the actual story of the game, which for me was very predictable and disappointing...I don't get how this game gets so many appraisal which for me is a good game for sure...but far, far, far away from one of the best games ever made as many say.
Now, I'm sure that you're all sensibly busying yourselves with making music, so your lives are, frankly, too short to be sifting through more than a half a million words of interviews. Therefore, I'm going to try to digest what I've discovered during this process for the benefit of those less sad than me! I'm not about to dictate which technique is 'best', though, because if reading this many interviews has taught me anything it is that people will always disagree on what constitutes a great sound. Instead I've recorded a number of different audio examples to allow you to judge for yourselves, just as I did, which techniques are likely to make a real difference to your own productions. I've peppered this article with a number of boxes giving details of these files.

yeah, i used to play the vht straight up sometimes. that amp was tonal sweetness, and had a tank reverb. if i dime it, i can get away with playing alot of stuff on the ac4. but i like having a little chorus for certain things, and i do a couple of songs that i would like to have a rotary pedal for, and although i'm not big on reverb, i don't mind using a touch of delay in place of it. if i did have a wah, i'd use it as a tone knob. oh, and i want a harmonizer. specifically, the eventide pitchfactor.
Guitarists have their own special system of music notation called guitar tablature, or "guitar tabs" for short. Using guitar tabs, a guitarist can play a wide variety of music without ever having to learn how to read standard sheet music. Though guitar tabs aren't a perfect way of describing music, they've allowed newer generations of guitarists to quickly and easily share information about how to play songs across the globe via the internet. Every guitarist should have at least a basic understanding of how to read tablature - it's the de facto shorthand for much of the guitar music you'll find written out online.
So fun...I like...I liked it I liked it a lot but the only thing was it took me awhile to get the email that was supposed to get so that is a kind of backed me up on the game but I'm doing good now though so that is good good good good good good good...The fact that the studio is making Mortal Kombat asked on the next generation console is showing you how much they want to improve on disfranchise if they made it for last GEN consoles as well done they would have not done a justice that it deserves besides the DLC being 30 bucks which is a big downfall for me see nest Jayston predator are one of my all-time favorite colors of all time I just wanted them still good game
Best brand in price/quality relation. I have 4 guitars, an epiphone explorer goth made on korea, and Jackson KV2 made on usa and 2 ibanez. RG320PG P2 and a RGT6EX, both made on indonesia. The first one is the cheaper, but the sustaine, action a comfort is very nice for a bugget guitar. I've played bugget guitars of other brands, and ibanez is far superior. In fact, my RG320 P2 is nice as some others guitars that cost twice of it price. Mi RGT6EX is excellent, to me must worth $1000 USD but the real price is close $800 USD or less.
The Kent 800-series hollow bodied guitars all had asymmetrical bodies and the pickup closest to the neck was tilted. There are several Kents that had symmetrical hollow bodies and no tilted pickups. The pickups are either humbuckers or wide single coils with covers. They resemble Gibson ES-style guitars. The necks and headstocks are very similar to the Kent 800s. They're probably newer than the 700s and 800s. I won’t be covering those here.
Every guitar player has their own distinctive sound, and many guitar companies have created artist and signature electric guitar models that were inspired by and/or designed in collaboration with the very best guitar players from the past and the present. Some of the most popular signature electric guitar models we offer here at Sam Ash are the Eric Clapton Strat guitars from both Fender and the Fender Custom Shop, ESP Kirk Hammett guitars, John Petrucci guitars from both Ernie Ball Music Man and Sterling by Music Man, and many more!