Gibson carefully adjusts the action and the string height before shipping the Epiphone Dot. Don't make adjustments unless you've got clear problems, particularly with string buzzing. Exercise extreme caution when adjusting the truss rod. Overtightening can damage the neck of your guitar. If you're not sure what you're doing, do not attempt to make these adjustments; have your guitar set up by a qualified professional luthier.
The simplest guitar amplifiers, such as some vintage amps and modern practice amps, have only a single volume control. Most have two volume controls: a first volume control called "preamplifier" or "gain" and a master volume control. The preamp or gain control works differently on different guitar amp designs. On an amp designed for acoustic guitar, turning up the preamp knob pre-amplifies the signal—but even at its maximum setting, the preamp control is unlikely to produce much overdrive. However, with amps designed for electric guitarists playing blues, hard rock and heavy metal music, turning up the preamp or gain knob usually produces overdrive distortion. Some electric guitar amps have three controls in the volume section: pre-amplifier, distortion and master control. Turning up the preamp and distortion knobs in varying combinations can create a range of overdrive tones, from a gentle, warm growling overdrive suitable for a traditional blues show or a rockabilly band to the extreme distortion used in hardcore punk and death metal. On some electric guitar amps, the "gain" knob is equivalent to the distortion control on a distortion pedal, and similarly may have a side-effect of changing the proportion of bass and treble sent to the next stage.
{ "thumbImageID": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "defaultDisplayName": "ESP LTD EC-256FM Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "See-Thru Black", "sku": "sku:site51371482100566", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-1371482100566.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black/H90046000003000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Lemon Drop", "sku": "sku:site51335886296183", "price": "429.00", "regularPrice": "429.00", "msrpPrice": "613.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-Lemon-Drop-1335886296183.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-Lemon-Drop/H90046000001000", "brandName": "ESP", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "See-Thru Black Cherry Sunburst", "sku": "sku:site51371482100552", "price": "329.00", "regularPrice": "429.00", "msrpPrice": "642.00", "priceVisibility": "1", "skuUrl": "/ESP/LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst-1371482100552.gc", "skuImageId": "LTD-EC-256FM-Electric-Guitar-See-Thru-Black-Cherry-Sunburst/H90046000002000", "brandName": "ESP", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.
Yamaha is famous Japanese Company known for producing an extensive range of musical instruments. It has caught the attention of the beginners and intermediate guitar players due to its budget-friendly product prices. Thus, it is the excellent choice for those who are going to have a first experience of buying any guitar. They can indeed get a good deal without costing a fortune. It is also suitable for Acoustic players. Yamaha continuously produces high-quality instruments that are unconquerable when it comes to the material or even sound quality.
What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…

Guitar chords are dramatically simplified by the class of alternative tunings called regular tunings. In each regular tuning, the musical intervals are the same for each pair of consecutive strings. Regular tunings include major-thirds (M3), all-fourths, augmented-fourths, and all-fifths tunings. For each regular tuning, chord patterns may be diagonally shifted down the fretboard, a property that simplifies beginners' learning of chords and that simplifies advanced players' improvisation.[70][71][72] The diagonal shifting of a C major chord in M3 tuning appears in a diagram.

Our production/assemble time frame: 15 - 25 working days since our professional Control Team and Supervisor Engineer will ensure that your ordered guitar is top notch considering the fact that this guitar is intricate to assemble and they check very carefully every detail such as the finish, fret work, pickups, strings. And also, they will test the sound quality. We do not rush up the process of manufacturing your guitar since we would like to deliver to you best quality performance.
From shopping for a first electric guitar to setting customized action, this do-it-yourself playerÕs primer for owning and maintaining an electric guitar explains the ins and outs of: choosing the right guitar; cleaning, tools and basic maintenance; personalizing and improving on a "factory setup"; trouble-shooting; basic guitar electronics; setups of the pros; and much more. Written by Dan Erlewine, author of the bestselling Guitar Player Repair Guide and the popular "Repairs" column in Guitar Player magazine, this book also includes a plastic sheet with specialized guitar tools you can snap-out!
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.
Fender guitars are made either in the United States or Mexico. There is a limited number of guitars being made in Japan, but those are only sold on Japanese domestic market. The difference in quality between the U.S. and Mexican Fenders is obvious but not too great. No matter which one you go for, you will get the same refined tone that made this company famous.
Smaller players, musicians who travel frequently, and parents shopping for children, may also want to consider travel and mini-acoustic guitars. These guitars were designed for the comfort of smaller players, and for convenience when traveling, but many guitar manufacturers have invested significant time and resources into creating smaller-scale acoustic guitars that don't compromise quality or sound.
This is where you want to go! Steve is kind, professional, and supremely competent. just brought my Taylor 614ce for a neck adjustment and electronics work. Steve told me that he was running with about a two to three week turnaround period but then did a couple of quick fixes -on the spot- that made my guitar really sing for my next gig. I'll bring it back to him for some more in- depth repair soon but for now I am a very happy camper. And he didn't even charge me a dime!! I will be visiting Steve for all my guitar and mandolin service needs in the future.
Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.
{ "thumbImageID": "Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Silver/L20504000003000", "defaultDisplayName": "Squier Vintage Modified Jaguar Bass Special SS (Short Scale)", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Candy Apple Red", "sku": "sku:site51500000217472", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Candy-Apple-Red-1500000217472.gc", "skuImageId": "Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Candy-Apple-Red/L20504000002000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000217471", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Black-1500000217471.gc", "skuImageId": "Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Black/L20504000001000", "brandName": "Squier", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Silver", "sku": "sku:site51500000217480", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "329.99", "priceVisibility": "1", "skuUrl": "/Squier/Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Silver-1500000217480.gc", "skuImageId": "Vintage-Modified-Jaguar-Bass-Special-SS-Short-Scale-Silver/L20504000003000", "brandName": "Squier", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
While the Boss ME-80 doesn’t have anything in terms of extras to really blow expectations out of the water, it includes some nice and handy features. The onboard looper works well and has 38 seconds of loop time, which is enough time to do some basic jamming over some chords. And speaking of jamming, the AUX input on the back of the ME-80 is nice, since it allows you to plug in an iPhone/metronome/mp3 player/any other music playing device and jam along with your music (this is fun and a feature we would actually use). The USB output lets you take patch editing over to your computer, in BOSS's Tone Studio software. Cool, but not necessary since editing patches is actually very easy and actually quite fun on the unit itself (no complicated menus to go through - just fun knobs!). One idiosyncrasy to be aware of is that if you plug anything into the headphones jack, the speaker simulator is automatically enabled. This is great for solo practice in your headphones, but note that that’s the only way to actually switch it on.
Time to turn our attention back to the guitars themselves. The following are some of the better low-cost electric guitars available on the market today; refer to an anatomy of electric guitars to see definitions of guitar pieces and places. When you're deciding, go to a store and try them out for heft, comfort, stability, sound quality, and appearance. Shop around, comparing, for instance, online prices against local store prices. This is an investment, so choose wisely.
A low latency audio card will allow to run your guitar signal (via an adapter cable or a mixer) into the PC and through the Amp Sims, (the M-Audio 2469 is a good card for this and reasonably priced), this will allow you to drive/crank the simulators as loud as you'd like to get the tone you want; and control the overall volume with your PC, good speakers/monitors are a must for this.
Paul Gray (b. 1972 d. 2010) swapped his longtime association with Warwick basses for a customized version of the ATK bass series, the PGB1. He was impressed with the ATK bass after he bought one from a pawn shop and told Ibanez that he would endorse them if they put the ATK series back into production. He switched to his signature model shortly before recording of the Slipknot album All Hope Is Gone and used them until his death in 2010.
However, even for recording experts who can discern if something was done at Columbia Records Studio A or Olympic or wherever, it’s challenging to define a percentage of influence that the studio provides. “I don’t know that you can measure it in any way. It’s really more an ineffable quality of sound and aesthetics,” Horning Schmidt says. “You can measure frequency response and you can measure decibels but in my research I’ve found that back in the thirties and forties, you had engineers saying ‘you can’t just go by the meters. You have to use your ears.’”

CALIFORNIA SPECIAL models mix no-compromise attitude with top-notch build quality and sound. Optimized bracing reduces mass for superior resonance, while the upgraded bone nut and saddle grant them exceptional sustain. Featuring all-solid construction, the fully-painted solid Sitka spruce top and matching 6-in-line headstock give the models a shot of electrifying attitude and unconventional Fender style that loves to be both seen and heard.
Fuzz is an indistinct, nasty overdrive that is synonymous with Jimi Hendrix. The Dallas Arbiter Fuzz Face is the most famous fuzz pedal, known for the way is breaks up and adds something special to any guitar tone. Fuzz pedals are most commonly used on top of clean or lightly overdriven tones, as this is where the character of the pedal can really come through; used on top of already distorted tones they can be great for making a load of noise! Two main types of fuzz are available – silicon (which sounds softer and more rounded) and germanium, which sounds harsher and more treble-y.
Without a doubt, dont even entertain the idea of getting one, I was given one by an unfortunate friend who bought one, to try and get it to at be semi playable.. the necks are not even straight, in fact , you could ski off them.....the frets stick out from the side of the neck, the strings are so far off the neck you cannot even fret them down.... There must be no quality control whatsoever in the factory..

Other defining features include its 3 on a side tuners on a painted headstock, a bound neck and body with trapezoid or block inlays on rosewood or ebony, and its Tune-O-Matic bridge with the Stop Bar tailpiece.  While some of these features are wonderfully cosmetic, the components such as the bridge set-up and pickup selection gave the Les Paul the massive sound and sustain for which the guitar is renowned.

This will only matter to some players (I’m looking at you, lefties), but if you happen to play guitar the non-traditional way (strumming with your left hand and fingering with your right) you may want to pay close attention to brand. Because left handed players are in the minority by a long shot, it can be difficult to find quality guitars of that orientation. If you are on the market for a left handed guitar, you may want to stick to Fender or Epiphone, as they are known to produce quality offerings in that category.
Unlike many of the other pedals, which are designed to create dramatic or exciting effects, these units take care of the less glamorous (but still very important) jobs in creating your tone. Sound-conditioning effects are the ones that will give the finishing touches to your sound, making the difference between “amateur garage band” and “international touring guitarist.”
An amplifier stack consists of an amplifier head atop a speaker cabinet—a head on top of one cabinet is commonly called a half stack, a head atop two cabinets a full stack. The cabinet that the head sits on often has an angled top in front, while the lower cabinet of a full stack has a straight front. The first version of the Marshall stack was an amp head on an 8×12 cabinet, meaning a single speaker cabinet containing eight 12" guitar speakers. After six of these cabinets were made, the cabinet arrangement was changed to an amp head on two 4×12 (four 12" speakers) cabinets to make the cabinets more transportable. Some touring metal and rock bands have used a large array of guitar speaker cabinets for their impressive appearance. Some of these arrangements include only the fronts of speaker cabinets mounted on a large frame.[25]
One full step down from Drop D. Utilized by bands like A Day to Remember, Biffy Clyro, Swallow the Sun in all their albums, The Ocean Collective in the Heliocentric / Anthropocentric albums, Slo Burn, Bullet for My Valentine, Evanescence, Children of Bodom, Disciple, Demon Hunter (Only on Demon Hunter), Avenged Sevenfold in "Radiant Eclipse", As I Lay Dying, Asking Alexandria on Reckless and Relentless, Rammstein, August Burns Red, Mastodon (on some songs), Helmet (since the Size Matters era), Converge, System of a Down, What Great Fangs, Black Stone Cherry, Chimaira (since The Impossibility of Reason), P.O.D., Ill Niño, Killswitch Engage, Deftones (in their album White Pony), Disturbed, Gojira (mostly on The Way of All Flesh & L'Enfant Sauvage), Metallica's St. Anger album, (except for the songs "Invisible Kid", which has one guitar in Drop G#, "Dirty Window", which is in Drop C#, and "The Unnamed Feeling", which has one guitar tuned to Drop A#/Bb), Weissglut, Atreyu, Darkest Hour, Breaking Benjamin (on some songs), Mudvayne, Born of Osiris (when using 6 string guitar) Periphery along with some alternate tunings, Cancer Bats, Slipknot (on their demo Mate. Feed. Kill. Repeat.), Zakk Wylde, Escape the Fate, and Skillet, Nirvana on their Bleach album, Porcupine Tree on the songs Anesthetize and Cheating the Polygraph.
The Fender Bassbreaker 15 Amplifier Head presents a budget friendly option for those in need of great tone. You have 15 watts of pure power to channel here as well as a studio friendly Power Amp Mute so you can record straight into a desk - a great feature for those in need of a powerful stage and studio amplifier. This is a professional grade amplifier head that features 3 very unique tonal options and overdrive levels to provide you with a whole host of lush fender tones that range from glass like cleans to vintage overdrive. Perfectly paired with the Fender Bassbreaker 212 Guitar Cab.
Very useful. Today I gave life to a Strat, adding a SD lil´59 in the neck, a noiseless single coil in the middle and a SD hot rails in the bridge. I used a H-S-H diagram from SD website with one volume and one tone pots (500k Alpha pots). I will add a second tone pot later on with a push/pull pot to split the little humbuckers in single coils. The guitar sounds huge now!

Tablature, or Tab, is a very important tool that allows guitar players to easily learn how to play chords, melodies, and songs. Learning how to read guitar Tab can be a mystery for some newer guitar players. In this guitar lesson, we are going to learn how to read guitar Tabs and go over some of the more common elements you will see when you pull up a Tab for a song you want to learn. Try this lesson if you want to learn how to read guitar sheet music.

While some effects can create a drastic change in a signal’s sound, other effects act more like a coating that add subtle variations of texture rather than a huge makeover. Texture-adding pedals like time-based or ambient effects – such as reverb, delay/echo, vibrato, flanger, and chorus – work best when added to something much more pronounced instead of the other way around (which in a signal chain means they go towards the end).

While SG Guitars kits are sold in a number of different timber varieties, if you are looking to match the original as closely as possible you will be best selecting a model constructed with a Mahogany body and Maple neck with Rosewood or Ebony fretboard. * Gibson has recently transitioned from Rosewood to Richlite due to New CITES Regulations For All Rosewood Species.
Gain is the strength of the electronic signal carrying your sound. A standalone gain booster is essentially just a preamp, and can be an effective way to overdrive the preamp section of your amp, creating easier musical-sounding breakup and increasing the amp's power. A gain booster in a stomp box lets you instantly boost your sound level for solos without altering your fundamental tone.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: amplifiers","reportSuiteIds":"guitarcenterprod","pageName":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: amplifiers","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[gc] shop: amplifiers and effects","events":"event1,event31","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitar amplifiers","prop5":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop6":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop3":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","prop4":"[gc] shop: amplifiers and effects: amplifiers: guitar amplifiers","eVar1":"guitar amp","prop9":"redirect","campaign":"4soswxxa","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] sub category2","prop8":"guitar amp"}
In the early 1960s Rickenbacker history became forever wedded to one of the biggest music upheavals of the 20th century: the invasion of the mop-top Beatles from Liverpool, England. The Beatles used several Rickenbacker models in the early years. Before the group broke up, John Lennon would own at least four. This love affair began in Hamburg, Germany in 1960 when he bought a natural-blonde Model 325 with a Kauffman vibrato. Lennon played the original (which was eventually refinished black but still easily identified by its gold-backed lucite pickguard) on all Beatle recordings and in all concerts until early 1964.
This list is insanely bad! First of all, John Mayer is only as good as your typical high school amateur. And before anyone starts spouting off, I’ve tried to find some obscure videos of him to prove myself wrong. But I can’t, it’s all Minor Pentatonic stuff with nothing innovative added to it. Secondly, how about some finger pickers on the list: Doyle Dykes, Scotty Anderson, Chet Atkins, Merle Travis, Tommy Emmanuel. Let’s not forget DANNY GATTON the greatest guitar player you’ve never heard. Also, if we’re talking about the best of the best, BRENT MASON should ALWAYS be in a Top Ten list, although he never is. But, you’ve heard him on all sorts of Nashville recordings. Acoustic guitar players like Andy McKee, Ewan Dobson, Don Ross, (I wish I knew more than that but I only recently discovered their Chuck Norris like awesomeness). Never limit yourself to the mainstream! There are many guitar players that are mentioned only because they are famous and have influence because of that. They may come up with a catchy riff or played in a well known band. But, that doesn’t make them a truly great guitar player.
Listen, I realize I’m recommending a lot of Yamahas here, but I swear they are just that good when it comes to QUALITY and PRICE. I don’t know why that is, but it’s something a lot of guitar players have discovered. They’re just really good and very affordable. You’ll find a lot of guitars that are better, but they will cost you. I’m recommending every single guitar here for a reason. Keep that in mind.
Some effects, and the boxes that produced them, altered musical periods beyond recognition. The valve-driven Watkins Copicat, for example, will forever be associated with the sound of the late 1950s British music “beat” scene. Developed by Charlie Watkins in 1958, this odd machine supported a tape-recording mechanism that would record and play back any sound with varying lengths of delay in-between the replay heads. The device was critical to the rockabilly sound of the late 1950s, the “beat-group” sound of The Shadows, and the Liverpool Merseybeat scene of early 1960s (as well as the Birminghambeat, or Brumbeat scene). The sensation of hearing a guitar warble and wail to its own output encouraged guitarists to experiment with different styles of attack and vigor. For example, the noise that begins and ends the original 1962 recording of “Telstar” by the Tornados was made using the Copicat by creating a loop of echo and reverb effects. This produced what can best be described as some sort of space-echo/attack-helicopter noise.
The following year the Standard model received a short-lived redesign seeking to reduce production costs and price on American Stratocasters. This revised version lacked a second tone control, a newly designed Freeflyte vibrato system, and a bare-bones output jack. A reshaped ‘Comfort Contour’ body with deeper forearm and waist contours similar to an early 1960s model was introduced. What it did retain was the 1970s-style headstock decal. The 1982/83 version of the Standard Stratocaster has little in common with the Dan Smith guitar, apart from the period when they were sold, but is sometimes informally (and controversially) presented as a “Dan Smith-era” or “redesign” guitar. After the Standard Stratocaster was discontinued in 1984, Fender Japan produced a 22-fret version with a flat 9.5″ radius and medium-jumbo fretwire until 1986.[14]
As Tom Wheeler writes in The Soul of Tone: Celebrating 60 Years of Fender Amps, "It’s powerful, it’s loud and it’s sensitive to the player’s touch. It sounds great, responding beautifully across the frequency spectrum. It exhibits a sparkling, harmonically rich tone at low and moderate volumes. At louder volumes it thickens with a sweet distortion that only seems to get creamier the more it’s cranked. It is particularly well matched to certain popular guitars, especially the Stratocaster."

Response to the Marshall DSL1HR is overwhelmingly positive, with users praising it for its practicality and great tone. Most describe its tone as being true to the Marshall sound, while others use words like fierce and killer. A lot of bedroom rockers appreciate the amp's 1W and 0.1W switchable power rating, and complements it for being pedal friendly. Portability is also what prompted many users to get this amp.
Here we have a well preserved vintage Hohner HW600n HW for Hohner Western Acoustic Dreadnought Martin D35 Style acoustic guitar. with a gorgeously grained THREE Piece Mahogany back and sides WoW its really a beauty. Workmanship Fit and finish quality is excellent this guitar is stunning, previously set up and is Great sounding in near mint like condition its from the late 80’s early 90’s D35 Look alike, Spruce top with Mahogany Neck and some of the absolutely highest grade Mahogany your going to see its flamed and figured and has fire and looks as if it could be Koa but listed as Mahogany at any rate this is one of the nicest models Hohner in this era truly a stunner,,, its in top structural shape as well its neck angle is excellent at 1-11/16ths at the nut its medium profile neck is very easily played and is a convertible c shape… We were impressed with her sound to with nice volume and a mature sounding tone. We think you’ll like this beautiful Vintage Hohner as well we believe this to be late 1980’s to early 90’s made in Korea and would fool any made in Japan fan for its fit and finish workmanship this is a good vintage guitar in its own right… no cracks no repairs no issues no excuses someone is going to have a smile on their face. any questions or to buy this guitar contact Joe at: .

Jackson is a well-known guitar manufacturing company that was set up in the year 1980. Jackson guitars are considered as among the best guitars on the planet. Their guitars are known for its slender and refined layouts. Jackson guitars are also popular for their typical pointed headstock. The Jackson JS32 Kelly RW is an electric guitar which has won the hearts of many owing to its stylish design and great sound quality. When it comes to the sound quality of the guitars, Jackson is the best guitar brand to have.
Besides the guitar just being fantastically sampled and recorded, Silk owes a lot of its realism to the controls in the upper right-hand corner on the main screen. Swing, Timing, Feel, and Variance can all be effortlessly adjusted and do a fantastic job of recreating that natural human touch or really the human flaw.  Timing is my favorite because the ebb and flow of the tempo between individually picked notes really reminds me of my own fingerpicking technique (or lack thereof).
I have a 12-string Lyle in really good shape. Bought as a b-day present from me back in late 1970's from a pawn shop. I need to take it to a luthier to have it set up better, but it sounds really good. Just right now the action is a little high, but not that much wear. For a long time, I put it away, finding it hard to chord as a relative newbie back then. But now, I am more than ready. It does say it was made in Korea ~ which makes it seem a little more rare. The sound is still great or maybe even better! Wish I knew what it was worth, but I hope the guy I find to set it up will know more.
If ever there was a candidate for compression, bass is it. This instrument has a wide dynamic range (even more so when slap techniques are employed), but it usually needs to sit at a very steady level in the mix. But should compression be applied during recording, to control the levels going down, or later, during the mix, to insure the best blend in the track? Well, the answer is probably both, but with potentially different approaches to squashing the signal. During recording, a Limiter might be the ticket, to control transient peaks that might overload ADCs, producing pops and spikes that can ruin a take. A classic fast VCA compressor/limiter (like the dbx 160) could be employed to handle peaks, without really reducing the player’s dynamics at this early stage. Then when mixdown rolls around, more gentle compression can be introduced (like the smooth squash of an optical compressor like the LA-2A), to tighten up the dynamics, as needed for that particular mix. Applying the right kind, and amount, of compression/limiting at all stages will assure you get nice clean recordings, that can be properly squeezed into the mix when the time comes. 

I am an SG player through and through. I own a bunch of them- mostly from the initial run of SG Special Faded with the moon inlays, because that particular run felt right to me. I am looking to have a custom SG style guitar made, but I don't know of any builders who make SGs. Can anyone tell me a boutique or custom shop builder who does SGs? Thanks!
@Carl – Sorry to hear that you are having trouble. I am not clear on why this would be happening from the info you have provided. Can you please shoot us an email with details on the input and output connections and how each pedal is being powered when you experience this problem? Also, please also include a video that clearly shows this behavior, your connections, and how each pedal is being powered so that we have a better understanding of what you are experiencing.
I'm pleased more and more people are realising this. It really is blindingly obvious when you think about it. Anyone who talks about "resonance" when talking about a solid electric guitar body is completely missing the point, and the point is to remove, as far as is possible (and that's pretty far), any influence the body has on the amplified sound. So the primary quality you're looking for in a solid electric guitar body is not resonance, but density.
While production and distribution of guitars under the Ibanez brand began much earlier, the company gained notoriety outside its native Japan when it started importing Ibanez guitars to the United States in the mid-1960s. These first efforts were funky-looking creations which sold at the low end of the guitar market, primarily in department stores. But the company's products continued to move up the quality ladder until the company was perceived as a legitimate market force, selling what were essentially copies of other companies' designs in the mid-1970s. A patent lawsuit from Gibson ended the sales of those copies, but Ibanez had by then gained a foothold in the guitar market globally.

Beginners face this very common problem when they go for the cheaper options. The strings are usually far from the fret board, and due to lack of knowledge, many think that this is how it was meant to be. Such a guitar brings pain to the fingers since force has to be applied to lower the string to the fret board so as to produce sound. All these difficulties make it very hard for a beginner to learn the guitar. For you to learn the guitar quickly and without problems, you should get a guitar whose distance from string to fret is less.
it's really hard to beat the ric sound. the 335 12's and fender 12's are cool, but really the ric has the sound we're all familiar with. that being said, everyone has different tastes and I encourage you to play as many different ones as possible. Jimmy Page used a Fender 12 on Stairway. I went rick for that early beatles sound. the neck is tiny but it's part of the instrument.
OK some people will know this already but let’s just be clear about switch terminology. A switch as you see it on the bench in front of you will often be a set of switches, mechanically connected within a single assembly. Wikipedia explains. The important thing to remember is the number of ‘poles’ is the number of switches that you have ganged together off a single lever in the component and the ‘throw’ or ‘way’ part describes how those switches operate.

I string up the guitar and tune it to standard pitch. Put the guitar in playing position and capo the first fret. I hold the 6th string down at the last fret as that is where the neck joins the body. Then I turn truss rod right (clockwise) until there is no relief hardly if any bounce at the 7th and 9th frets using the 6th string as straight edge, don't go too far just maybe a slight tiny bounce because you don't want to backbow the neck. Then I simply turn the truss rod left counterclockwise 1/4 of a turn for relief and that's it. Take capo off and set action at 12th fret with 6th string 5/64 and 1st string 3/64.

In around 1988 Martin introduced a line of Stinger amps and effects pedals. Amps included the FX-1 (10 watts, 8″ speaker, “Tube Synth” distortion circuit, $152), the FX-1R (15 watts, 8″ speaker, Tube Synth, spring reverb, $220), FX-3B (15 watts, 10″ speaker, compression, separate pre-amp and master volume controls, 3-band EQ, $189), FX-3C (30 watts, 12″ speaker, Tube Synth, chorus, $299), and the FX-3RC (65 watts, 12″ speaker, Tube Synth, chorus, reverb, effects loop, $379).

the fifth, which is a perfect fifth above the root; consequently, the fifth is a third above the third—either a minor third above a major third or a major third above a minor third.[13][14] The major triad has a root, a major third, and a fifth. (The major chord's major-third interval is replaced by a minor-third interval in the minor chord, which shall be discussed in the next subsection.)

MAKING A TEMPLATE Once you have traced out your design to the wood you can start routing. I recomend making a template first for the body rout out of 1/4" hard board or something equivalent to that. The professionals use cnc machines to carve and rout the bodies but smaller shops will use templates made from acrylic. The hard board works just fine, but might not last as long. You can also rout the body by hand and forget the template but if you mess up there's no going back so be carefull if you do.

With this bundle, you get a hardshell case to securely transport your music instrument, an extra set of strings, and a digital clip-on chromatic tuner to maintain your guitar in tune at all times. Also included are some extra guitar picks, a polishing cloth, and an Austin Bazaar instructional DVD that can teach you all the essential techniques you need.

Good looks and playability seem to be the two biggest selling points of the Ibanez AEG10II. Many describe it as a fun instrument, thanks to its comfortably thin profile body and fast action setup. A good portion of its positive reviews are from users who after gigging with the guitar, have great things to say about its reliability and amplified sound.
What can we learn from these restaurant guests? The lesson is that we are very easily tricked into liking things we pay more for, even though they might not be that good after all. We get a particular feeling from thinking that we’re treating ourselves to something luxurious. If we, on the other hand, haven’t spent very much, we usually assume that it can’t be a good product.
An electric guitar is a guitar that uses one or more pickups to convert the vibration of its strings into electrical signals. The vibration occurs when a guitar player strums, plucks, fingerpicks, or taps the strings. The pickup used to sense the vibration generally uses electromagnetic induction to do so, though other technologies exist. In any case, the signal generated by an electric guitar is too weak to drive a loudspeaker, so it is fed to a guitar amplifier before being sent to the speaker(s), which converts it into audible sound.