Funny, the Dorado was manufactured in Japan during the 70's and the Japanese factory worker must have arbitrarily placed a model number when he or she felt like it. However, it seems that Serial Numbers (presumably in proper sequence) were always assigned and hand written with a black ink pen. My example, while space is present, is void of any model number.
{ "thumbImageID": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry/J47212000002000", "defaultDisplayName": "B.C. Rich Warlock Set Neck with Floyd Rose Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Cobalt Blue", "sku": "sku:site51500000031734", "price": "596.27", "regularPrice": "596.27", "msrpPrice": "857.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Cobalt-Blue-1500000031734.gc", "skuImageId": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Cobalt-Blue/J47212000001000", "brandName": "B.C. Rich", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Transparent Black Cherry", "sku": "sku:site51500000031735", "price": "599.99", "regularPrice": "599.99", "msrpPrice": "857.00", "priceVisibility": "1", "skuUrl": "/BC-Rich/Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry-1500000031735.gc", "skuImageId": "Warlock-Set-Neck-with-Floyd-Rose-Electric-Guitar-Transparent-Black-Cherry/J47212000002000", "brandName": "B.C. Rich", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
From standard EADGBE, all the strings are tuned up by the same interval. String tension will be higher. Typically requires thinner gauge strings, particularly the first string which could be as thin as six thousandths of an inch (about the thickness of a single human hair). A capo is typically preferred over these tunings, as they do not increase neck strain, etc. The advantage of these tunings is that they allow an extended upper note range versus a capo used with standard tuning which limits the number of notes that can be played; in some cases, instruo B♭ or E♭ (such as saxophones, which were frequently encountered in early rock and roll music) are more easily played when the accompanying guitar plays chords in the higher tuning. If standard gauge strings are used, the result is often a "brighter" or "tighter" sound; this was a common practice for some bluegrass bands in the 1950s, notably Flatt & Scruggs.

I had a single-minded desire for single-ended tone, but I didn’t want to drop insane moolah on a tweed Champ (or any of the tweed Champ clones out there, or even a tweed Champ kit), cool as they may be. Heck, even a Silverface Champ is going to set you back in the $300+ range these days. And it’s a Fender. Dependable? Yup. Great sounding? Sure. But no one is going to see it and say, “What the hell is that?” Which is part of the fun for those of us involved in the weirdoes and freakazoids of the gear world.

Strongly influenced by Stevie Ray Vaughn, Albert King, and Johnny Winter, Garrett is also a longtime fan of Lynyrd Skynyrd’s Allen Collins. Following the path that led Collins to his biting, cutting tone, Bo plays the same type of guitar as the Skynyrd legend, and gets tremendous versatility from his Gibson Firebirds. Incidentally, Winters and King are also notorious Firebird pickers. Bo says that his Firebirds (one of which is a rare collectible) allow him to go from nasty drive flavors to cleaner, Strat-like tones when he needs them.
This is a no brainer, but a value that must be considered before any purchase no less. As mentioned above, your abilities on the instrument will likely affect the price range you’re looking at, which may have an effect on the brands you shop within as a consequence. For instance, if you’re not looking to buy a high end guitar, you probably won’t even bother testing out a Gibson, as their guitars will likely be out of your range. The reverse is true as well, an experienced player on the market for high end tone probably won’t be satisfied by many of Yamaha’s offerings.
Wildwood Guitars is proud to be recognized as one of nine authorized online Gibson dealers. We invite you to browse our extensive inventory and discover the magic of one of the greatest American brands of all time. Located in the heart of Tennessee, the Gibson Memphis factory is known for crafting the majority of Gibson’s incredible semi-hollow and hollowbody instruments. These guitars are overflowing with the soul of the city they’re born in, and they represent the ultimate in both vibe and versatility.
Both Brian May from Queen and Ritchie Blackmore did use treble boosters for sure in their rigs to get more gain out of their amps. Germanium transistors are very inconsistent and are subject to temperature changes so they can be finicky. They also certainly color your tone to a large extent, which is something you may want. Clean boosts that use silicon transistors are much more common and reliable, they can also boost your signal without effecting your tone too much. For a general clean boost I would go for a modern one. If you want an old school sound, I’d check out a germanium based unit. Or like me, I’d get both.
Nicknamed - "Papa-Papa". DADDAD is common in folk music (Irish, Scottish), and for the execution of a rhythm guitar in "heavy" (alternative music) on 6th on the third string at the same time. To reach the tuning from DADGAD, Open D or Open D Minor, the G string is dropped to D so that the 3rd and 4th strings are tuned to the same pitch. DADDAD tuning is sometimes used on Dobro guitars for rock and blues. Notable users of this tuning include Billy McLaughlin and John Butler.
The 1964 TRG-1 was a slightly more asymmetrical variant of the WG body style, with offset double cutaways and offset waists. It had the squared-off Bizarro Strat head introduced in ’63 and rectangular-edge fingerboard inlays. The tail was a primitive top-mounted trapeze. Most of the face of the guitar was covered with a large metal pickguard, which had one two-tone neck pickup. The volume and tone knobs were above the strings, as was a small sliding on/off switch for the amp. In the off position, the guitar played out as a normal electric guitar. Horizontal grill slots were cut into the pickguard, behind which sat a 3-inch speaker. The amp operated on two 9-volt batteries installed in back. The TRG-1 shown in the subsequent ’64-65 catalog had a new, hooked headstock, but all the examples I’ve seen have the squared-off Bizarro Strat head. Also, the model I have has a TRE100 designation on the back sticker, so at least some were called this.
Squier Affinity Stratocaster has all the same features of the Fender Stratocaster guitar at a highly affordable price. It has a maple neck and an alder body which gives it a snappy Strat tone. It also has three single-coil pickups that can be manipulated by a 5-way switch. A vintage style tremolo system makes it a great choice for those who like that system.
Reverb – The best analogy for reverb effects would be playing your guitar inside a pipe. That’s an extreme level of reverb, of course, and these pedals will allow you to go from there all the way back to subtler effects like the natural reverberation of a concert hall. This effect sounds great with a clean tone, but beware of using it with heavy distortion or else you might lose too much definition from your sound.
A better idea is turning to established brands like Maton, Washburn, Epiphone, Fender… there’re plenty of respected manufacturers with long traditions in making guitars. No matter what type of guitar, all these companies have low-priced models that still benefit from the care and craftsmanship you’d expect from well-known brands. Prices start around $150 for basic types, then for $500-700 you’ll find an enormous choice.

It also has an overwhelming amount of sheet music in it. These music sheets allow you to practice what is being taught in the given chapter, which is nice, but going through the books, I felt there was a lot left unexplained. This was probably a result of them trying to simplify things as much as possible, but this actually leaves holes in the padawan guitarist's knowledge.
As a result of requests by audio engineers to reduce onstage volume, in the 2010s, in many large venues. much of the on-stage sound reaching the musicians now comes from the monitor speakers or in-ear monitors, not from the instrument amplifiers. Stacks of huge speaker cabinets and amplifiers are still used in concerts in some genres of music, especially heavy metal, but they tend to be used more for the visual effect than for sound reproduction.
This. There's genuinely nothing good about it. It makes a Squier Starter Pack and a Daisy Rock look like a PRS Private Stock. Pretty sure the description isn't even true. An old roommate of mine had one and it was the worst guitar I have ever played in my life and I'm not just saying that. Very seldom do I say that a guitar is just plain terrible. Even with other guitar brands that I hate (like Squier) I'll say, "well, everyone has their own preference," but this guitar is just inexcusable.
The Dean Vendetta pack offers a sharp looking metallic red super Stratocaster style guitar with dual humbuckers, a tremolo bridge for fun dive tricks, and a 24 fret neck. This is perfect for players that want to start learning lead guitar as soon as possible. The neck is quite fast for a guitar in its price range. Also included with the purchase is a 10-watt practice amp, gig bag, instrument cable, picks, a tuner, and a fairly comfortable strap.
Excellent article. I have found that is a complete waste of time trying to convince guitarist of anything contrary to what they already believe about instruments. The level of passion for the “wood doesn’t matter” camp is truly astounding. We are not testing a new drug or solving cold fusion. The question is simple, does wood make a difference in the tone of an electric guitar? Intuitively, it would seem strange if it didn’t; but, there are many factors that are going to affect the sound produced from a guitar; isolating them is as difficult as creating a study that will convince anyone of an idea they already are clinging to. I think this is a pretty good experiment, better than most I have seen. In the end though, who cares?…really. If someone would like a guitar made out of a Formica counter top…go for it, locking tuners, the pickups and strings of your choice…you’ll be ready to rock. And won’t you be the clever one? As for myself, my opinion, musical instruments have character, a soul if you will. That character comes from the material it is made out of and the craftsman that made it. There is no object more alive than a musical instrument. For arguments sake, lets grant the “wood doesn’t matter” their entire argument. I’d still buy the korina instrument over the countertop. And like most stubborn asses who play guitar, you won’t convince me otherwise.

Students and expert alike describe this guitar as a fun instrument, and goes further by commenting that it has exceeded their expectations. From its fast action playability to the quality of the finish, the Epiphone SGSpecial continues to rake in compliments. Several people even said that it comes surprisingly close to the feel and sound of a Gibson SG.

Ultimately, you want to make the best purchase for the person who will be playing the guitar while staying within your budget. As we recommended in the beginning, it’s good to get an idea of what the player is looking for. Find out what styles they like, and his or her favorite music. Looks are important too! The right guitar in the right color could make all the difference.
I was interested in this book, and almost walked away after reading many negative reviews which complained about black and white photos and numerous typos. Then I noticed it was available in a Kindle version, for only $9.99. I ordered the Kindle version, and have no regrets. I have read it on my iPad, and gleaned a lot of useful information from it. I have not encountered any typos, and the colored wiring diagrams and numerous photos are just fine. It seems that the paperback version suffered from a poor layout and printing job, which is a shame, since it is obvious to me that Mr. Swike put in the effort to make a good product, which the Kindle version surely is. Anyone interested in a simple but comprehensive intro to wiring their Strat/Tele/Les Paul will find this a good reference. I also enjoyed the Varitone circuit presentation, and the explanation of how capacitor values affect treble/bass response.
I have owned a lot of amps over the years. I am also a dealer in music accessories. Please note that we do not sell these amps, so I am not endorsing and using something my shop sells. I recently have bought a couple of amps in a series (I bought one first and then bought another) and have been really impressed. The Vox AV series.
If you do have logic of GarageBand they come with a vast sample library including lots of different guitar sounds, now combine that with melodyne and you can get some pretty convincing custom guitar parts. It's a slow process but it will sound a lot better than most straight VI's, I've done the same with brass section stuff in the past to good effect.
That is not always the case with acoustic electric ones, especially with piezoelectric pickups since they pump out a relatively high amplitude signal. All you really need is a small DI box that will attenuate the signal a little, and you plug the guitar straight into a mixer. Naturally, how good this is going to sound will depend on your guitar's preamp.
your right brian i been a acdc freak since u all been out in the early n mid 70s the greast band of all time. and i seen acdc 37 times through out the united states. i love my memories with the band and still watch and listen to the cds and dvds of the band. brian johnson is the best thing that happen to acdc since bond scott death. keep rockin guys i love u with a passion. mark

New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
Launch price: $499 / £445 | Body: Chambered basswood body with arched-maple top | Neck: Maple | Scale: 24.6" | Fingerboard: Rosewood | Frets: 22 | Pickups: 2x Black Top humbuckers | Controls: Neck volume, bridge volume, tone, master volume, 3-way pickup selector | Hardware: Anchored Adjusto-Matic bridge | Left-handed: No | Finish: Gold, Silver Sparkle, Black
Every skilled worker needs to look after their tools and musicians are no exception. Sure, wear and tear is normal—especially when you play your instrument often—but a little T.L.C. will ensure your musical gear continues to look, play and sound amazing for years. At Guitar Center Repairs, you'll find a dedicated team of certified musicians who take pride in helping you reach your highest level of playing potential. Make no mistake, your music maker is in the best of hands at GC Repairs. When it comes to looking after your musical equipment, certain things should be left to professionals—pickup installation, wiring customization and structural repair, to name a few. Mind you, there are tasks that every guitarist can take care of at home, including regular polishing and restringing. Of course, not everyone has the time to continually look after their instrument and bringing it to Guitar Center is a great way to save yourself time and ensure that the job gets done right. With that being said, GC's services go well beyond cleaning and string changing. For those of you who own a stringed instrument and find the action is higher than it once was, a truss rod adjustment is definitely in order. Or, maybe you want to personalize the look and sound of your guitar—in which case, an expert will be more than happy to swipe out your pickups for a new set, replace the pickguard or perform any other task to give you an axe that’s entirely your own. Honestly, your best bet is to browse this entire section and see what else is offered in the way of repairs, maintenance and modifications. Who knows, maybe your local GC is having a free guitar setup day, so feel free to have a look around this page or take a swing by the store in your area. Our friendly and knowledgeable staff is always happy to speak with other local musicians and setting up a quick appointment for your instrument will do wonders for your musical enjoyment. From nut and bridge replacements to even amp electronic upgrades, Guitar Center Repairs has you covered.
The Supro line continued to grow in 1938, as can be seen in the CMI catalog. Still around was the Supro Spanish Guitar, now called the Supro Avalon Spanish Guitar, other than the name change (which is not featured on the guitar, as far I can ascertain), it is identical. Gone are the wood-bodied, frumpy-pear Supro Hawaiian Model and the Model D amplifier, although a Supro Special amplifier is mentioned (and not described) as being available for $40, the same price as the Model D. One and the same?
Frankly, learning to play a song the Rocksmith way is exhilarating. If I (Carl) had looked up the chords online, I could have played the song just as easily. But I might have stopped to scroll down on the computer screen or to relearn the first half of the song until I got it down pat. After a few progressively more difficult play-throughs on Rocksmith, I'd memorized the song without even thinking too hard about it.
Looping – These pedals are miniature recorders that capture a passage, which you can then play back as much as you like. Many looper pedals also allow you to layer multiple recordings, and advanced models support extra features like built-in rhythms, mic and other instrument inputs, MIDI, USB and more. It’s worth noting that all the power of a looper pedal does come with a steep learning curve, so be sure that you’re experienced enough to handle one of these bad boys before you bring home one of your own.

Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 22 - Inlay: Block - # of Strings: 6 - Headstock: 3+3 - Bridge: Bigsby - Cutaway: Single - Hardware: Chrome, 3x Volume Control, 1x Tone Control, 3-Way Switch - Guitar Features: Pickguard

Now, if you are an electric player who doesn’t like using any pedals, that’s perfectly fine. Just be honest about the reasons. If you just like the sound of your guitar and your amp, cool. If you just want to keep things simple, I understand. That’s your preference, and it doesn’t make you better in any way than someone else who does. If you’ve been a genuine listener of music, you’ve seen and heard players who’ve blown their audiences away on un-amplified classical guitars, and players who blow us away with lots of pedals on their boards.
ESP is a Japanese company, which focused on the production of electric guitars and basses. This brand was established in 1975 in Tokyo. They produce instruments under the label of “ESP Custom Shop”, “Navigator”, “Grassroots”, “ESP Standard”, “LTD Guitars and Basses”, “Edwards Guitar and Basses” etc. Available price is Rs. 9,270/- onwards (approx). For more information, visit (Global) or (Japan).
Many guitarists with instruments that have more than one pickup spend most of their time on the bridge unit. Using a variety of pickup positions when recording will thin or fatten the sound as required, but also help free up space when it comes to the mixing stage. Think of a recorded mix as a layer cake; too much density in one frequency range will cause a headache for the mixing engineer.
But no all are created equal, and I don’t really do this — I have live performance gear for anything I do, actually, way more than I need at this point. But a good friend of mine does the whole live-thing-throug-PC and has completely sold his soul to Ableton Live (Music production with Live and Push). You can find Ableton Live Intro online for about $99. It’s not just a live performance tool but also a DAW, you can use it for recording, composing, etc. Again, not one I use, but probably what you want if you’re going for live playing.

In a band and got your slot to wail? Think about it. Shredding scales is all well and good but the best songs and solos have structure, tempo changes and memorable licks. It may be a cliché, but listen to Jimmy Page’s solo in Led Zeppelin’s “Stairway to Heaven” – now that’s how you build-up to a solo. It may be your time to shine, but don’t just gush everywhere – think about structure and let your solos build and breathe.
The Line 6 POD Farm program is famous for its amp simulation, however many users have realized that the quality of its modeled effects are equally superb. Some even use the POD Farm strictly for its effects! It has a huge collection of FX - up to 94 - and it modeled some of the most popular stompboxes including the MXR Phase 90, ProCo Rat, Uni-Vibe, Arbiter Fuzz Face and Big Muff Pi. It also includes modeled versions of old analog devices like the EP-1 Echoplex. Setting up is a breeze with its simple carousel-style interface, which lets you visualize your signal chain. Current Retail Price $49.00

The new Martin electrics were offset double cutaway guitars which, in terms of shape, fall very loosely into a Stratocaster category. The cutaways are a bit wider and shallower than a Strat, both pointing away from the body. The horns are much more rounded than a Strat. Like a Strat, the waist is slightly offset, and the lower bout has a slightly asymmetrical slant to it. The bodies were initially built of hard maple and rosewood laminates that imitate the look of neck-through guitars popular at the time, but actually have neck pockets with glued-in mahogany necks. These had unbound 22-fret rosewood fingerboards, dot inlays and a distinctive three-and-three variation on the old Stauffer/Viennese headstock � which may have originally inspired Leo Fender’s Strat creation � with script CFM logo decal. (Prior to developing the Strat, Fender visited the Martin factory and was shown some of the old Stauffer/Martins with the round-hooked Eastern European headstock shape.) These all featured chrome Sperzel tuners, brass nuts, twin humbuckers, threeway selects, two volume and two tones with chrome dome knobs, and a Leo Quan Badass bridge.

The earliest sound effects were strictly studio productions. In the mid to late 1940s, recording engineers and experimental musicians such as Les Paul began manipulating reel-to-reel recording tape to create echo effects and unusual, futuristic sounds. Microphone placement ("miking") techniques were used in spaces with specially designed acoustic properties to simulate echo chambers.[22][23][24] In 1948 DeArmond released the Trem-Trol, the first commercially available stand-alone effects unit. This device produced a tremolo by passing an instrument's electrical signal through a water-based electrolytic fluid.[25] Most stand-alone effects of the 1950s and early 60s such as the Gibson GA-VI vibrato unit and the Fender reverb box, were expensive and impractical, requiring bulky transformers and high voltages. The original stand-alone units were not especially in-demand as many effects came built into amplifiers. The first popular stand-alone was the 1958 Watkins Copicat, a relatively portable tape echo effect made famous by the British band, The Shadows.[26][27]
The Ampeg Bassamp Company, founded in 1949 by Everett Hull, responded to the growing demand for electric bass equipment by producing a line of bass amplifiers. Ampeg bass amps were widely used by electric bass guitarists in the 1950s and 1960s. The first bass amplifier offered by Ampeg was an 18-watt model with a single 12" speaker and a rear ventilation port called the Super 800. In 1951, they introduced a 20-watt version with a 15-inch speaker. In 1960, they introduced the B-15 Portaflex, a flip-top 25-watt tube bass amplifier with a single 15" speaker. While the Ampeg Portaflex had a pleasing bass tone, and was used by studio bassists such as James Jamerson and Carol Kaye, it was not powerful enough to be used in a stadium or arena concert.[3]
There are a very large number of acoustic guitar manufacturers in the world. However, not all are among the best, but this American brand specializes in acoustic guitars. You will find Martin guitars among the top 10 acoustic guitars in the world. It has greatly influenced the look and shape of the American acoustic guitars. Martin guitars are made from highly seasoned wood, which produces some really melodious tones. Mind you, these guitars can be expensive and taking care of the instrument is extremely important. It makes some extremely beautiful models like D-28 and D-45; however, they also manufacture budget-friendly models.
The output transistors of solid state amplifiers can be passively cooled by using metal fins called heat sinks to radiate away the heat. For high-wattage amplifiers, a fan is often used to move air across internal heatsinks.[14] Since transistor bass amplifiers used for large venues need to produce a high output, this usually means that bass amplifiers are very heavy. Most powerful transistorized bass amplifiers use class AB or so-called "push-pull" topology, in no small part because this output circuit scheme can be physically lighter and cooler than an equivalent Class A amplifier. These need heavy transformers and require large metal heat sinks for cooling.
The fact is, the qualities of different strings can have an effect on your guitar’s resonance and tone, on the quality and responsiveness of your attack as a plectrist or finger picker, and impact your speed and other important factors. And think about your budget. Some coated strings list at nearly $20, while a good basic set of electric guitar strings can be scored for $3 to $4 on sale.
If this doesn’t work, or you’re just a little paranoid about hooking the guitar directly into the PC, you can get one of these. This is the Line 6 Pod Studio GX, and it’s a great value and pretty much a one-stop shopping starter kit. The box you see there is a guitar USB interface, with an input designed for guitar. It’s also got a headphone output, so you can listen through the interface. I had an older version of this ages ago, which I used for basic guitar input until I got some more advanced recording gear that worked well with guitars.
While recording AC/DC's Back In Black, Tony Platt used a pair of condenser mics to pick up different speaker cones and give a wider sound to each guitar: "I developed a technique for recording guitars with two microphones roughly pointing at different speakers, which can be spread out in the stereo mix so it's not just a series of mono point sources. It makes for a more open-sounding guitar. That sound suited their particular technique, which involved Angus and Malcolm playing the same chords but with different inversions to get a very big unison guitar sound."
The Marshall MG series are also strong contenders, a lot of players use them and they’re ideal for the kind of music you like. You see them in a lot of studios. Not a tube amp and all that, but perfectly serviceable and they have some onboard effects, which can be fun. I used a mic’d MG50 when I played in Kenny’s Castaways for a year or so in the house band, and people said I sounded great. Amp cost me $280 on sale I think. I found the sound of the MG superior to the Line6, but not so much that I’d pay a lot more money for it. If I had a gig where I needed options and didn’t already own the effects I needed, I’d have no problem using the Line6.

Guild is an American guitar company that makes some amazing semi-hollow electric guitars such as the Starfire and the Aristocrat. These are guitars that nail the retro-rock sound and have the looks to match. Many classic Guild models have been revived through the Newark Street collection. While these guitars are cool beyond words, where Guild really shines is in the acoustic arena.

Telecaster is considered to be the oldest solid body electric guitar in the world. Capturing that type of pedigree is not easy, but Squier managed to pull it off. Handling the Squier by Fender Vintage Modified Telecaster brought back some of the best memories of my youth, when Telecaster was the go to axe. This is definitely one guitar worth trying out.

John and I weeded out a couple of guitars that arrived in far-from-playable condition because we think every guitar should be at least reasonably playable when you buy it. Avi Shabat agreed, saying, “The more messed up a guitar is when I get it, the more I have to charge for setup.” We also didn’t have the short-scale guitars set up, for two reasons: First, we think a guitar for kids—one that’s likely to be purchased at a low price and given as a present—should play acceptably right out of the box with no setup; second, all of the short-scale models we received did play very well out of the box, and all were equipped with strings of the same approximate gauges.
Semi-hollow Body Guitars: The first and most classic semi-hollow body is the Gibson ES-335, which was quickly embraced with Chuck Berry and later sonically reinvented by Freddie King, Alvin Lee, Larry Carlton and a host of others in the ’60s and ’70s, who pushed semi-hollow Electric Spanish models into the ’60s and ’70s with aggressive technique and tones.

Tonality is an important consideration for many musical instruments, and that’s especially true when it comes to acoustic guitars. The strings, fretboard, sound holes, and body of a guitar all play a role in how the guitar will sound to an audience. The distance between the strings and the fretboard (called the “action”) can also affect sound quality.
More often than not a customer chooses bone as a replacement for cheap plastic nuts supplied on new guitars. It's such a good material for instruments because it's really dense – meaning vibrations travel through it faster meaning that more vibration is transferred to the rest of your instrument - essential! It's also great because it contains natural lubricants which are essential for tuning stability.

Gibson Les Paul specifications during 1958–60 varied from year to year and also from guitar to guitar. Typical 1958 Les Paul Standard necks had a thicker “club-shaped” neck, thinner frets and lower fret height, which changed during the course of 1959 to develop into typical 1960 necks with a thinner cross-section and wider, higher frets. Les Paul Customs from the same period had totally different frets and were referred to as “The Fretless Wonder”, which were designed for jazz guitarists with thick flat-wound strings.[note 7][note 6]
The main reason this exists is because some players prefer to drive their amplifier's preamp with high gain to achieve distortion instead of using an emulation through a pedal. This means that you can't push modulation and time-based effects into the preamp since distortion will come after them. Again, you can do this but it will sound horrible because it breaks our four main rules above. Nobody wants a muddy, smeared, and washed out tone, and thus the effects loop exists.
Pedaldoc – is a company specialized in the production of kits to convert standard guitar effect pedals into boutique sounding pedal stomp boxes. They carry “do it yourself” kits to modify many topselling Boss pedals, Electro harmonix stompboxes, Vox 847´s wah pedals and more. The only thing needed to perform one of their mods in is about an hour of your time and a soldering iron. Their kits are designed for guitar and bass players who may not have any knowledge of electronics and all the components that need to be substituted are clearly market on a picture of the pcb board of the pedal.
On December 22, 1969, the Gibson parent company Chicago Musical Instruments was taken over by the South American brewing conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments. Norlin Musical Instruments was a member of Norlin Industries which was named for ECL president Norton Stevens and CMI president Arnold Berlin. This began an era characterized by corporate mismanagement and decreasing product quality.
The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.

Guitar FX BOX does REALLY real-time DSP. Signal is sampled from sound card input, processed and then sent to the output with VERY LOW LATENCY. Unlike many other "real-time" audio programs, I/O delay with Guitar FX BOX is extremely low, virtually undetectable! This is achieved using DirectSound (or WDM streaming) for fast access to the hardware (sound card) and fast DSP algorithms optimized for real-time processing. Through DirectSound, latency is about 20ms with most sound cards, or even less. When WDM streaming driver is used, latency can go as low as 5ms! Nevertheless, exact total i/o latency still depends on hardware/drivers.
This acoustic guitar model has been over the time well renowned as the best selling in the UK. This is owed to its high value and sound quality, accompanied by its trendy design and ease of use. It has a shortened scale length that makes it easy to play, even for beginner guitarists. It mostly comes in a warm natural color and is for the right handed guitarists. It is quite affordable, with prices ranging from around INR 8900. You can click below to find more product details on the official link.
The name has a long and involved history that is interwoven with that of the resonator guitar. Originally coined by the Dopyera brothers when they formed the Dobro Manufacturing Company, in time it came to commonly mean a resonator guitar, or specifically one with a single inverted resonator. This particular design was introduced by the Dopyeras’ new company, in competition to the already patented Tricone and biscuit designs owned and produced by the National String Instrument Corporation.
The Epiphone Dove Pro is such a good guitar that it’s going to be a contender for a top pick in pretty much any list, but in this one we’ve given it the title of best value electric acoustic. You can spend a lot more money and not get much more guitar, and you can even spend more money and not get a guitar as good. The Dove Pro is that accomplished.

I put the pots into a wiring jig I made for Les Pauls: a piece of pickguard plastic with holes to match the LP control arrangement (cardboard works just as well). This lets me do my wiring outside the body, and everything fits back in neatly.The guitar’s controls were on a metal mounting plate. We decided to ditch the plate, sticking with the ’50s theme.
The Orange Crush PiX CR12L is another fairly standard style beginner amp. It has the same standard features as most beginner amps. The Crush PiX CR12L is a little more expensive than some similar featured amps, like the Velocity V10, but it makes up for the extra cost with a better build quality, better tone, and a well designed control layout. The Crush PiX CR12L gives a lot of control over the tone, but manages to do so in a clear, easily understood control panel.
Electric guitars are versatile instruments. If you’re not entirely sure where your playing career is headed, pick a Strat-style solid-bodied guitar in a ‘sensible’ colour, and you’ll have an instrument that can do pretty much anything – and one which you won’t be embarrassed to get out of its case when (and if) you get through the ‘death metal’ phase!
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
Before I recommended it to him, I went to my local GC and played one through some headphones. I thought it sounded pretty good - and certainly outgunned my Pocket Pod for pure functionality. Is this (or something like it) the be all and and all of tone? Of course not. But this (or something like it) can provide all sorts of options for practicing while leaving your neighbor (or spouse!) in peace.
The power handling capabilities of a speaker cabinet or individual speaker are always given in relation to a specific impedance (a measure of electrical resistance); the most common impedance ratings in bass speaker systems are 8 ohms and 4 ohms, although some equipment is rated down to 2 ohms or even more rarely to 1 ohm. For example, the Aguilar DB751 puts out 975 watts if plugged into a 2 ohms speaker cab, 750 watts at 4 ohms, or 400 watts at 8 ohms. The way to interpret ohms ratings is "backwards" to the way wattage ratings are assessed. That is, with wattage, bassists make sure that their amplifier does not put out too high a number of watts for a speaker cabinet, but with impedance, bassists ensure that the amplifier does not put out too low an impedance for a speaker system. For example, if an amplifier head is rated at 4 ohms, a 4 ohm speaker, an 8 ohm speaker (or any ohm rating higher than 4 ohms, including 16 ohms or 32 ohms) could be connected (albeit with the amplifier producing less watts as the number of ohms, the resistance, increases). However, bassists do not connect a 2 ohm speaker cabinet to a 4 ohm amplifier, because this will be too much of a load (too low an impedance) on the amplifier, and it could damage or destroy the power amplifier.
Her dad was Broadway star John Raitt, but Bonnie's artistic parents were blues giants like Howlin' Wolf and Mississippi Fred McDowell, whom she met and performed with early in her career. She learned fast: Starting with her acoustic slide workout on 1971's "Walking Blues," Raitt rolled out a fearsome repertoire of blues licks, fingerpicking with the best and wielding a slide like an old master. Most of all, she set a crucial precedent: When guitar was still considered a man's game by many, Raitt busted down that barrier through sheer verve and skill.
So, many engineers add a second mic at the other end of the room, to capture that room ambiance. Put it on a separate track and you can dial it into your overall sound at will. But remember, if you have an acoustically dead room covered with foam tiles, you do not really have a room sound to capture. Stick the amp into a tiled bathroom, that’s a whole different story.
Featuring a tremolo tailpiece, the player is guitarist is guarantee weeks of sustain. In terms of playability, the Jackson JS22 features a rosewood fingerboard that is ultra fast with breathtaking jumbo frets, giving the player a comfortable chording experience and high speed runs with little or no effort. The basswood body features an arched top armed with dangerous looks to compliment its incredible sound, an ideal choice for you.
These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
Description: Body: Mahogany - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Diamond - # of Strings: 6 - 12 - Scale Length: 25.5" (65cm) - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Custom - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Natural, Brown

Arch top body 16" wide across the top, carved spruce top, back not carved by arched by braces, rosewood back and sides, f-holes, style 45 backstripe, bound ebony fingerboard, 2 white lines inlaid down length of fingerboard at the edges, hexagonal fingerboard inlays on 6 frets (sometimes pearl, sometimes ivoroid), vertical "Martin" pearl peghead logo, nickel plated parts, sunburst top finish.
The way you connect your amp, speaker and DI box depends on whether the DI box has a built-in dummy load.If miking isn't practical, or you don't want to find space for a soundproof speaker/mic box, then perhaps one of the available DI options will give you the result you need. I was once reviewing an analogue guitar preamp that provided several programs, both clean and overdriven, and I noted that one of the clean settings sounded really superb. When I checked the manual, I found this was the bypass position! The reason it still sounded good was that the unit was matching the high impedance of the guitar to the medium impedance of the recording system and, for clean sounds, you can get this same effect by using any good-quality active DI box that offers a high-impedance (500kΩ or more) input. A little compression will add density and 'spring' to the sound (experiment with the attack time to get the best 'pluck' sound, as too fast an attack can squeeze all the life out), while reverb will put back the missing sense of space.
A common issue for playing on larger stages or in studios is the distance between a guitarist’s pedals and their amp. Guitar cables that are longer than eight or nine meters (25 or 30 feet) not only degrade the quality of the signal, but also become incredibly susceptible to noises like hiss and hum. To allow guitarists to drive their signal over 100 meters (300 feet), Radial created the SGI-TX/RX™. The SGI changes the unbalanced guitar signal to a balanced line-level signal, altering the impedance for longer XLR cable runs; guitarists are able to use their amps offstage or in an entirely separate room when trying to craft the perfect tone.

By 1961, at least, the makeover was complete. The old mini Les Paul, the J-1, was changed to become a sunburst double-cutaway solidbody. These had widely flaring equal cutaways, a single rectangular neck pickup, a large pickguard which covered most of the treble side, a wooden adjustable bridge, covered tailpiece, volume and tone. The bolt-on neck now had a more Gibson-style open-book head shape (with round logo sticker). The fingerboard had the old large dots with two small octave markers. The J-1, in a number of forms, would survive at least through 1966, if not longer. It is presumed that the J-2 was still around and that it had also become a double-cutaway; it most certainly was still in the catalog, as a double-cut, in ’62.
Guitar FX BOX is acting just like a good collection of analog effect pedals. Just plug your guitar into the sound card input and your guitar will sing and scream. You can apply a wide range of high quality effects to guitar, voice, and other inputs real-time - I/O delay is really low, almost undetectable. This is achieved using DirectSound, WDM streaming or ASIO for fast access to the sound card hardware and special DSP algorithms optimized for real-time processing. Besides high sound quality, Guitar FX BOX features intuitive user interface, supports presets and hot keys for quick presets changing, MIDI/Game controllers pedals, configurable tuner, metronome, file input/output. Currently included effects: Overdrive/distortion, Amp&Speaker cabinet simulator, Echo, Pitch shifter, Reverb, Wah-Wah, Chorus, Tremolo, I/O Equalizers, Dynamic compressor, Phaser and Volume swell.
Despite their small stature, some of the smaller amps on the market still boast features you’d expect to see on much larger models. For example, many include some degree of tone shaping and equalization. This can take the form of a single knob dedicated to presence or even a three-band EQ capable of managing bass, mid, and treble. If you know you want to route your little amp through a larger speaker, or your sound restrictions are so great that your sessions are limited to headphones, you’ll want an amp that boasts a headphone output. These are sometimes standard 3.5mm headphone jacks, though some larger models boast ¼-inch outs.
Tube amps are appreciated for their high fidelity, which allows for the player’s ability and the quality of the guitar to be put to full fruition, and for their equally natural overdrive, which is achieved easier than with most solid state amps. However, besides being more expensive as an initial purchase, tube amps will also prove harder to maintain since lamps have a tendency of blowing up and are themselves quite expensive.
i have played fender most of my life .Fast neck and comfortable .However when my musical interest changed to southern rock i decided to buy a gibson . The mahogony body sounds different as does the string thru design of my firebird .Now i play both .Out of the box i prefer gibson and dont need to change a thing .I see many fender players always looking for “that sound” changing pickups pots etc.and using many boxws to change the tone.All i use with my gibson is a wa wa and overdrive
Harmony was founded in 1892 in Chicago by Wilhelm J.F. Schultz. Sears acquired them in 1916. Harmony made guitars for others under many names, some of which they acquired from other companies due to bankruptcies. These include Oscar Schmidt, Stella and the Sears brand Silvertone. Harmony went out of business in 1985. A new company is currently selling guitars under the Harmony name – many of these are classic Harmony designs such as the Harmony Rocket electric guitar.
Inspired by the Fuzz-Tone’s ability to add an aggressive swagger to any guitar melody, the mid-60s saw an explosion of copycat fuzz stompboxes. Most of the imitations were atrocious, but some became infamous. A few deliberately tried to combat the limitations of guitars themselves, like Gary Hurst’s 1965 Sola Sound Tone Bender MKI, which reused the three-transistor circuit of the Fuzz Tone. For the MKI, Hurst tweaked certain resistor values, which extended, or sustained, the guitar notes for longer. A two-transistor version of the tone bender (the MKI.5) morphed into Jimi Hendrix’s favorite stompbox, the simple and durable Arbiter Fuzz Face. The later model, the MKII, was at the heart of Jimmy Page’s secret sound in early Led Zeppelin recordings, When the Fuzz Face was released in 1966, it set a precedent for Hendrix imitators (“I Don’t Live Today” being the most frenetic extension of the Fuzz Face’s limits). With a keen ear for experimentation, Hendrix would often prefer the Fuzz Face’s tone when the battery was half-charged, in large part because germanium transistors fluctuate according to voltage. Guitarists would often have to wade through different batteries in order to find their own tone.
The D-18E was a mahogany dreadnought with the neck pickup and a second bridge pickup. The typical Martin pickguard had the front point cut off and a notch in back to make room for the pickups rings. A three-way toggle was mounted on the upper treble bout. Controls included one volume and two tones, with the big plastic knobs. D-18Es are the rarest of these early Martin electrics, lasting only from the ’58 prototypes through 1959. These began with prototype #163746. Around 858 of these were produced.
Installing pickups and wiring mods can be complicated, but learning to do common pot and jack repairs is almost more important, as they can save you time, money and frustration, especially before or even during a gig. That said, it can be daunting to know what to buy when jumping into the world of soldering, but for less than $80, you can have tools that will last for years.
Electric guitars and guitar equipment - want something new? Shop online and in-store for your new guitar setup. Pick from solid body, semi-acoustic, and hollow body styles to get your ideal electric guitar. We stock all the major guitar brands like Fender, Gibson, and Ibanez. Alongside electric guitars, you'll find amps and pedals from Marshall, Vox, and Orange.
2. Do your saddles have notches cut into them? If not, then I suspect they could do with some (or if they have, but they're extremely shallow, perhaps they need deepened a little). Just note, however, that this is very easy to screw up and should probably be done by a tech if you're in any way unsure about doing it yourself. Also, you can't just cut a notch in one saddle. You would have to do all of them to the same depth, then raise the bridge a little to make up for the depth you just removed.
For years, Schecter has provided a nice counterpoint to the various Les Paul and Strat look-a-likes on the market (many of which are very good) at an affordable pricepoint. As my local guitar shop owner once said, for the money, they might make the best all around guitar south of $1,000. You can spend more than that, but the point is, they don’t skimp downrange.
A way to increase the usability of the sound acquired this way is to wire a capacitor in series with the pickup that has its electric polarity reversed. This filters out that pickup's lower frequencies and thus preserves the corresponding frequencies from the other pickup. The resulting sound is fuller and stronger, yet still different from the standard in-phase combinations, resembling the sound of a "cocked wah" (a wah-wah pedal set in a fixed position). The capacitor used for this is usually in the 20–100 nF range.[23]

The four-string guitar is better known as the tenor guitar. One of its best-known players was Tiny Grimes, who played on 52nd Street with the beboppers and played a major role in the Prestige Blues Swingers. Multi-instrumentalist Warren Ellis (musician) of Dirty Three and Nick Cave and the Bad Seeds is a contemporary player who includes a tenor guitar in his repertoire.
{ "thumbImageID": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "defaultDisplayName": "Brian May Guitars Brian May Signature Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Black", "sku": "sku:site51274319719826", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Black-1274319719826.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Black/512637000001000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Antique Cherry", "sku": "sku:site51274319719831", "price": "849.99", "regularPrice": "849.99", "msrpPrice": "1,308.00", "priceVisibility": "1", "skuUrl": "/Brian-May-Guitars/Brian-May-Signature-Electric-Guitar-Antique-Cherry-1274319719831.gc", "skuImageId": "Brian-May-Signature-Electric-Guitar-Antique-Cherry/512637000593000", "brandName": "Brian May Guitars", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
By the mid 1990s Korean instruments were rising in price as Korean labor rates and other costs went up. Many Korean and Japanese companies set up factories in Indonesia to take advantage of reduced costs there and Fender set up their Mexican factory to take advantage of reduced labor rates in a setting very close to their USA factory. With modern CNC equipment and Korean and Japanese ownership and management, it was possible for Indonesian factories to very quickly turn out good student- and intermediate-grade instruments. In my experience, however, none of the Indonesian products rival the quality of the better Japanese or Korean guitars. The new Mexican Fender guitars give excellent "bang for the buck" and in many cases play and sound better than the later CBS-made American Fenders.

Epiphone Broadway Electric Guitar Make way for the Broadway, Epiphone’s big, bold and blindingly beautiful hollow body archtop guitar. The Epiphone Broadway has been a jazz club staple since the 1930s and it continues its soulful career with new appointments. The big-bodied Broadway features a laminated maple body with a select spruce top, a hard maple neck, a rosewood fretboard and Alnico Classic Humbucker pickups.
Most new electric guitars tend to ship pre-strung with "super light" guitar strings. Depending on your technique, and the style of music you play, that string gauge may or may not be too light for you. The following is a list of the standard string gauges included with each set of electric guitar strings. Note though that different manufacturers include slightly different string gauges in their sets of strings.
With the PAC112V there is no harm going with the crowds. The Pacifica is a crowd-pleaser precisely because of its versatility – and so whilst it might have a very recognisable look, this electric gives you the opportunity to craft a sound that is entirely your own. The only drawback is its weight, which is not much of a drawback at all – particularly for this price.
The Fender Squier Bullet Stratocaster is one of the most popular low budget electric guitars on the market. For what money can buy around this price, it’s good value. The quality of the hardware, tuners and pickups can’t go up against the original Fender Stratocaster, but it still sounds really nice and feels good for playing, practicing and some first gigs. A perfect entry-level guitar that is worth the investment.
So, here's the story I heard from the guys in this shop, one of whom claims to have met Trev at NAMM. He said Fender (and maybe Gibson?) owe him a bunch of money for custom parts and design fees and whatnot, so he started the Vintage line as a sort of f*** you to them. Don't know if it's true but they're so much like a real tele I could see him getting sued, assuming they're not afraid of him countersuing for unpaid invoices. Who knows, maybe it was all a sales ploy. In any case all the sales pitch I needed was playing one. Plays as nice as my MIM Deluxe for half the price.
Yamaha’s Pacifica Series spans many ability levels and price ranges, with notable models such as the entry-level PAC112 proving one of the most popular beginner’s guitars on the market. Then there is the RevStar Series, which launched in 2015 – another beautiful collection, inspired by the street-racing motorbikes of London and Tokyo in the sixties.
The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.
Don’t be fooled by the lack of reviews for this guitar on Amazon. Dean makes some really solid guitars, they just happen to be a less popular brand than the other big names. I love this one because you’ve got 2 humbuckers for powerful rock and metal tones, but you get additional tonal versatility thanks to a push/pull coil tap. So, the C350 definitely isn’t a one trick pony. The flame maple veneer adds a nice finishing touch.

Description: Body: Nato - Body Construction: Solid - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 3 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Cutaway: Single - Hardware: Chrome, 1x Volume Control, 1x Tone Control, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Green
Heritage Guitars, founded in 1985 by four long-time Gibson employees when Gibson relocated to Nashville, continues to build guitars in the original factory at 225 Parsons Street inKalamazoo, Michigan. Many of their models evoke memories of Gibson’s late-1950s/early-1960s “golden years.” The H-150 and H-157 are reminiscent of the original Les Paul and Les Paul Custom, while the H-535 is a modern version of the Gibson ES-335.
Description: Flamed 10-Top, Gold Hardware Model. Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Wood: Mahogany - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Gold, 1x Volume Control, 1x Tone Control, 5-Way Switch, Locking Tuners - Pickups: Dragon II - String Instrument Finish: Blue Mateo, Ruby, Gold Metallic, Whale Blue, Dark Cherry Sunburst, Violin Amber Sunburst, Emerald Green, Vintage Yellow, Black Sunburst, Gray Black, Natural, Black, Amber, Tobacco Sunburst, Orange, Black Cherry, Vintage Natural
Pacifica series of Yamaha electric guitars are the ones you have probably heard of once, mistaken for a Strat a couple of times, but never really considered. Needless to say, that was a mistake. One quick look at Yamaha Pacifica PAC510V OVS reveals why. Before even getting into details it doesn't take much to recognize the apparent quality all around.
A Chorus effect can help you achieve lush, warm, and rich tones that work well during busier parts of a song. The effect attempts to simulate the sound of multiple performers playing the same part of a song at once. It works similarly to a flanger effect, where a sound is duplicated and slightly delayed. Choruses often use a longer delay than a flanger, and the delay time is also modulated with an oscillator to simulate the natural variations in time and pitch that will occur between several different performers.
Choruses (Chori?) come in mono, stereo, and true stereo versions, and a good one will provide lots of control across the depth and speed of the modulation desired. In the case of a mono unit, the aggregate tone produced by the circuit is flattened and passed through a single jack, where as a stereo (sic) unit will pass wet and dry signals through different jacks. A true stereo chorus unit will produce a true stereo signal, where the effect is mixed properly into left and right channels.

One possible way of dealing with the g string tuning issue (my experience has involved the low e more than anything) is to wind the string on the peg so that the winding goes up from the bottom of the peg, not v.v as it is done at factory. This reduces the angle at which the string sits relative to the nut and neck, potentially reducing the problem caused by the friction this angle creates when it contacts the nut. It will likely have a significant impact on the string staying in tune over time and you don't have to worry about filing the nut. A little nut lube might help too.

I love the action of my El Dorado. I have no more “dead strings” because of the string height and because of the wide nut which allows more room between the strings and the frets. It has an action that provides playability which no other guitar gave me, that is, no: Fender, Gibson, Schecter, Epiphone, Squier, B.C. Rich, Urban, Yamaha, Reverend, Peavey, Ibanez, or ESP. There were others I tried but I don’t remember the names. It sounds great when I play Psychedelic Rock, R&B, Rock, Heartland Rock, Folk Rock, and old Country.

Madbean Pedals provides schematics and circuit boards so you can create your own pedal kits. As the creator, Brian, describes it, “I love making music and I love making things, so pedal building is a happy accident for me. Mostly, it came from being too broke to buy any gear. I owned and used only two pedals for about a decade: a TS-10 and a Digitech PDS-1000 Digital Delay. I used those for both my bass and guitar gigs. Even my drum gigs, I think. Anyway, rather than spend money I didn’t have, I decided it would be more fun to take a “peek under the hood” and see what the whole effects thing was about. That was about six years ago, and the obsession grows a little more every day! “
Juszkiewicz, 64, is known for being temperamental, ultracompetitive and difficult to work for. A former Gibson staffer recalls a company retreat in Las Vegas punctuated by a trip to a shooting range, where executives shot up a Fender Stratocaster. In recent years, Juszkiewicz has made two major pushes, both seemingly aimed at expanding a company when a product itself — the guitar — has shown a limited ability to grow its market.
The process for recording sound from a guitar amp might seem simple; you have your amp and a mic to capture it, stick mic in front of amp, press “record,” and play. Done! The truth is, though, that even when using the same guitar and amp with the same settings captured by the same mic, the results can vary greatly depending on where you place that mic. Add the variables of different mics and multiple mic placements on one speaker cab, and your sonic possibilities expand exponentially. The elephant lumbering into the room at this point in the game is the fact that more and more people are recording direct to interface using digital amp simulators, or DI’ing and applying an amp plug-in in the digital-audio workstation (DAW). These facilities have improved tremendously in recent years, but the majority of professional guitarists and professional studios still mic actual amps to record the most dynamic guitar-based music being made today, so we’ll stick with honing these old-school skills.
You can run up to six of the 112 built-in internal effects within the Boss MS-3 Multi Effects Switcher at the same time and integrate three of your existing stompboxes into that sound too. So, to say there’s a world of options at your feet is an understatement. You can use it with your hybrid MIDI gear and utilise it to channel switch between amps too.
Well, to be more specific, we're talking about Twin Reverbs made between 1965 and 1967. Throughout the decades, these sought-after tone machines have turned up in the rigs of countless guitarists, including Stevie Ray Vaughan—who used a mid-Sixties 85-watt blackface model during his 1985 tour of Japan—Steve Howe, Johnny Marr, Jack White and Dweezil Zappa. The Fender Twin Reverb is considered a standard model for players seeking a clean sound, and it is especially known for the quality of its built-in spring reverb.

Description: 1966-1967 Model. Body: Alder - Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Block - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Vibrato - Cutaway: Double - Hardware: Chrome, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Single Coil - Pickup Configuration: S-S - Guitar Features: Pickguard - String Instrument Finish: Blonde, Black, Sunburst - Guitar Type: Electric
The “best” here is subjective. Again, what is best for me may not be best for me might not be best for you and vice versa. In general here are my recommendations for buying a guitar from the best brand of electric guitars for beginners at every level. There are several brands available in the market that claim to offer the best quality electric guitars for the beginners and for the seasoned guitarists as well. But some of them are really up to the mark if you are looking for the best guitar, you can go with them certainly. 
Vox's first electric guitars, the Apache, Stroller and Clubman were modelled after solid-body, bolt-neck Fenders, which at the time were not available in the UK. A four-string Clubman Bass followed shortly after. These first guitars were low-priced, had unusual TV connector output jacks and were produced by a cabinet maker in Shoeburyness, Essex. Vox president Tom Jennings commissioned the London Design Centre to create a unique new electric guitar, and in 1962 Vox introduced the pentagonal Phantom, originally made in England but soon after made by EKO of Italy. The first Phantom guitars were given to The Echoes to trial and were used by them until 1970. They were used on many of the recordings by The Echoes and records they did with other artists such as Dusty Springfield. Aside from the unusual body and headstock shapes, Phantoms featured copies of the Fender Stratocaster neck and its attachment, the Strat's three single-coil pick-ups and standard vibrato bridge that in this case copied a Bigsby unit. Aside from being a bit awkward to hold for seated playing, the Phantom guitars now approached professional quality, performance and price. Phil "Fang" Volk of Paul Revere & the Raiders played a Phantom IV bass (which was eventually retrofitted with a Fender neck). It was followed a year later by the teardrop-shaped Mark VI, the prototype of which had only two pick-ups (rather than three) and was made specifically for Brian Jones of The Rolling Stones, again using a Bigsby-like "Hank Marvin" bridge. By the end of the decade, Stones bassist Bill Wyman was shown in Vox advertisements playing a teardrop hollow-bodied bass made for him by the company, subsequently marketed as the Wyman Bass. Many guitar gear authorities dispute that he ever actually used the instrument for recording or live performance. See also Vox Bass Guitar. Vox experimented with built-in effects and electronics, with guitars such as the Cheetah, Ultrasonic, and Invader offering numerous built-in effects. Ian Curtis of Joy Division is known to have owned two white Vox Phantom VI Special effects guitars which had push button effects switches on the scratch plate. Amongst many innovations were the Guitar Organ, which featured miniaturised VOX organ circuitry activated by the contact of strings with fret contacts, producing organ tones in key with guitar chords. This instrument was heavy and cumbersome with its steel neck and external circuit boxes, and rarely worked correctly, but was a hallmark of the ingenuity of this company.

Hawaiian lap steels are not in the American Teisco Del Rey catalog, however, five laps remained in the ’66 Japanese Teisco catalog. Still available was the Harp-8, an 8-string console with two pickups and some sort of electronics controlled by four floor pedals. Still around were the H-39, the H-905 and the self-amplified TRH-1. Also available was the H-850, a single-pickup 6-string very similar to the H-905.

I have achieved my best results with this technique when miking resonant hollow-body guitars, getting the mic in as close as possible to the guitarist's picking hand. Large-diaphragm condensers, especially the Neumann U 87 and Manley Cardioid Reference tube mic, have proven superlative performers on big-box guitars such as the Gibson ES-175 (see photo on p. 114). The small-diaphragm Oktava MC 012 and medium-diaphragm Shure KSM32 have worked wonders on solid-body instruments, most notably on improvisational-guitarist Ron Thompson's seven-string custom axe.
“Take a humbucker wound with 42-gauge wire as a benchmark. With an Alnico II magnet, it would have a warm, soft bass response, a very sweet high end and a slightly pronounced mid- range. Alnico III, funnily enough, is not quite as strong as Alnico II. So, the highs tend to be more muted and rounded. Probably the best way to imagine the sound of Alnico III is to think of the early 1950s when this form of magnet was very common. Think of the sounds of the jazz and clean guitar tones from that time – that plummy roundness.
In late 1960, the amp was redesigned with three, rather than two, channels, each with two inputs, and offered with an optional Top Boost, or Brilliance, circuit, which introduced an extra gain stage and separate bass and treble controls. The Top Boost feature proved popular enough that it became standard on the AC30/6 (so named for its six inputs). Its chimey high end was a signature of the Beatles’ early recordings and was later favored by guitarists like Brian May, Tom Petty, Peter Buck and The Edge, whose 1964 AC30/6 has been featured on every U2 album.
Perfect working condition Amp is an absolute beast, if you know anything about these AC30s you'll know that there tone is unbelievable. Make me an offer or trade These amps sell for close to 18k and well above that on oversees markets The amp does have some cosmetic ware but obviously does not affect the sound what so ever Gibson, fender, guitar Watssapp me 0737886874 Amp is based in Durban ...
I love squire guitars because they are cheap and affordable. I love the fact that I now have a stratocaster so if you think that they suck think again. I can play under the bridge and scar tissue etc on my squire stratocaster honestly for those that can't afford a fender this is the best thing that has ever happened to me because I can now play an electric guitar which is not only good but it is brilliant
Amp Modeling: A multi-effects pedal does not necessarily guarantee that it also includes amp modeling. Amp modeling basically means that, in addition to effects like reverb, delay, chorus, fuzz, distortion, compression, et al. it also has the ability to sound like - or model - various tube and solid-state guitar or bass amplifiers. Amps have a tremendous impact on tone, which is why brands like Marshall, Vox, Fender, Matchless, Mesa Boogie, and many others have cult followings. Copying the true character of an amp in the digital world is admittedly a tall order, and one that multi-effects pedals are not great at; even the best ones struggle. Still, they do a decent-enough job, and you should decide if you want your multi-effects pedal to include amp modeling.

{ "thumbImageID": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst/L21567000001000", "defaultDisplayName": "Fender Player Stratocaster Maple Fingerboard Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000219695", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst-1500000219695.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst/L21567000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tidepool", "sku": "sku:site51500000219696", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-Tidepool-1500000219696.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-Tidepool/L21567000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

The "Slide Guitar Extension Nut" presents a bad case of convenience to the manufacturer (only having to make one size) disguised as a convenience to the customer (pretending one size fits all). This thing is not very versatile. With an outer string spread of 1.75", it's made for a wide guitar neck so if yours is only average, the outer strings will be suspended off to the sides of the overall width of the neck. That's not insurmountable but it's also not something every budding slide player wants to tolerate.

The K-4L (Teisco Del Rey ET-460 Super Deluxe) had four of the large, chunky, single-coil pickups with chrome sides and black center insert revealing six square poles. These were controlled by four sliding on/off switches, plus a 3-position switch for solo, rhythm and super bass sounds, as well as volume and tone. The roller bridge had a spring-loaded muffler/mute.
This is a great DVD, and Keith's style is very laid back, and easy to listen to. You can't help but like the guy, and once you start watching the DVD, you don't want to stop. He is extremely knowledgable, and it is like having an instructor right there with you. The DVD begins with the very basics, and works up to some quite complicated playing, so there would be something in this for everyone, from complete beginners (like me) to those looking for more challenges with their playing. For the price, I don't think you can go wrong.
Chorus is the sound at the beginning of the Guns ‘n’ Roses song Paradise City. It is a gentle, shimmering effect that is good for arpeggiated chords and adding that little extra to a lead tone (such as in the solo for Smells like Teen Spirit by Nirvana). However, we recommend using it sparingly as it can sound dated and old fashioned if over used (unless, of course, old-school is what you’re going for). Common controls include level (the volume of the effect), tone (affects the EQ of the chorus effect), rate (how quickly the note shimmers) and depth (how large and prominent the shimmering is).
Excellent information. There is so much more to discuss on this topic. I built an Explorer shaped guitar with Strat hardware and humbucking pickups. I love the dive bombing note bends and the fat sound of humbucking pickups. I used Koa for the body and the neck came from a '70's Hagstrom electric. REALLY, thin neck. Read about guitars. See what artists like to play and why. Then fit it to your needs / wants. Brian May's Red Special uses wiring techniques I never heard or thought of. And he and his Dad made that guitar. Les Paul invented the guitar with the same name. Read about him and what he wanted. The ideas are out there to expand on. My Les Paul has 2 volume controls and a common Bass and Treble control. Different way of thinking. And it works for me.
For the uninitiated, effect pedals usually take the form of small-ish metal boxes which sit on the floor in front of you. These can be switched on and off using your feet. Hence, pedals. The technology contained within these pedals is designed to alter your tone in any number of ways. For example, cleaning it up and making it louder through to adding layers of shimmer, fuzz, whammy or ‘verb. Don’t worry, we’ll refer back to these terms later because they are genuine terms in the wacky world of pedals.
The Magnums met with a reception roughly as enthusiastic as the previous Breadwinner and Deacon. In the Carter tables it suggests that the Magnum line was redesigned to look like more conventional Fender-style basses with offset double cutaways in 1978. Other than the body shape, the 1263 Magnum III was identical to the I, and the 1264 Magnum IV was the same as the II.

The string is not the only thing that vibrates. The guitar itself vibrates, and how it vibrates depends on the tone wood. The pickups are attached to the guitar and therefore they go along for the ride. In other words they vibrate under the strings which adds to the disruption of the magnetic field. So the environment the pick ups are placed in affects the tone. A good example is Neil Young's Old Blackie, which has an aluminum pick guard on it which gives it a unique.
The instruments have been set up at the factory. However, time, temperature, and transportation are a few of the many things that can cause a guitar to go out of "intonation". We recommend that you get your new guitar set up by a qualified luthier upon delivery. We recommend taking it to a qualified guitar tech for a set up. They will adjust the neck and bridge to take out the buzzing. We ensure that before shipment there is no evident of fret buzz before shipment and the guitar plays beautifully since our professional guitar technicians inspect each instrument by hand, then perform a full, and precision setup. All brand new guitars need proper setup after shipment to suit your personal preference that would strongly correlate to your playing style. We believe that your Local Guitar Shop can properly and safely adjust the truss rod and setup the guitar correctly for issues of fret buzz and bow neck. Truss rod adjustments are made to alter the straightness (flatness) of the neck. Truss rods often require adjusting when temperature and humidity change the amount of bow in the neck. Weather, specifically temperature and humidity, may have a dramatic impact on the way your instrument plays. All instrument woods expand and contract with seasonal actuations in temperature and humidity, and naturally, string height and playing action are affected. The neck needs a simple truss rod adjustment to correct any problems like fret buzz and bow neck which can be easily done by guitar experts. And also, you may adjust the bar of bridge. Please be advised that guitar necks are crafted from wood, and they will sometimes shift during shipping and as the temperature/humidity/elevation changes. An important part of maintaining your guitar is knowing how to adjust the truss rod. When a guitar experiences temperature and humidity swings, such as when seasons change, it can develop a slight bow in the neck that results in a guitar that plays buzzy or is suddenly much harder to fret. If this situation occurs, you can often correct the problem simply by tightening or loosening the truss rod.

With over 8 decades of development, the electric guitar and music from guitars is getting progressively more sophisticated. Nowadays there are thousands of models available, from a number of manufacturers; electric guitars come in all kinds of shapes and sizes – some reminiscent of the regular acoustic guitar, and some drastically different from the traditional instrument. Regardless, there's a number of features which are invariably present in practically every electric guitars: the headstock, neck, body and strings. The headstock includes the machine heads, truss rod (may not be used in all models), string guide and nut; this section is used for tuning and holding/adjusting the strings. The neck serves the function of supporting the strings, and it's comprised of a fretboard, the inlay fret markers, the actual frets and a neck joint. The body of the guitar is comprised of several mechanisms including the pickups (neck and bridge), saddles, tuners, pickup switch, control knobs (tone and volume), output connector and strap buttons – sometimes others, in more sophisticated models. Finally, the strings are usual divided in brass and treble variants.

this is literally the worst piece of cow dung in the industry. I wouldn't even call it a guitar, it's so poorly made. Management, especially the CEO, don't care a bit about quality, the only thing that matters is their unrealistically high production numbers. the production processes are so archaic they are amateur, and they have the audacity to call it the worlds finest guitar. all of this stems from the CEO and his manic psychotic neurotic management style (he has to sign off on EVERYTHING: new hires, transfers within the company, promotions, raises, budgets, any funding for new parts or machines.

Description: Body: Maple - Body Construction: Semi-Hollow (Chambered) - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 3+3 - Bridge: Adjustable - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony - String Instrument Finish: Goldburst, Redburst
The Lotus Vantage copy (Washburn Eagle, Aria Pro II Cardinal series, or Ibanez Artist) double cutaway (batwing) guitar with a solid body, 3 per side tuners on headstock, rosewood fingerboard with brass inlays, brass nut and neck-through construction (though there may have been a bolt-on model). This was usually finished in emerald green, polished mahogany or stained blue/white breadboard style and occasionally gloss white with 2 exposed humbucker pickups.
One of the most over looked and shockingly good guitars I have ever played in my 23 years of chopping wood. In their rich history there have been little misses, but over all Aria guitars are supreme to their competitor especially at the price point. My 1977 Aria les paul copy has at leased twice the balls as my buddy's 6 year old Gibson and tons more playability. Forget about comparing to epiphone, seriously. eBay yourself a Aria electric and you WILL be pleasantly surprised. Aria acoustics; If your reaching for a nylon, Aria makes some of the best classical guitars with a history of employing some of the most well noted artisans of the craft, such as Ryoji Matsuoka. Fine craftsmanship all around, built with quality woods and have a tendency to get better with age, laminated or not. As for steal strings, I've only played one to be honest, but this Martin 'lawsuit' was a work of art. Thank you.
Carrying on the tradition of his hero, Derek Trucks has taken Duane Allman’s sound and technique and forged ahead with one of the most soulful slide sounds ever to be heard.  His uncle, Butch Trucks, was the drummer for the ABB, and Trucks began to play with the band at a very young age before becoming a full time member and keeping Duane Allman’s heritage alive for a new generation of listeners.
San Francisco-based Senior Contributing Editor Joe Gore has recorded with Tom Waits, PJ Harvey, Tracy Chapman, Courtney Love, Marianne Faithfull, Les Claypool, Flea, DJ Shadow, John Cale, and many other artists. His music appears in many films and TV shows, plus an incriminating number of jingles. Joe has written several thousand articles about music and musicians and has contributed to many musical products, including Apple’s Logic and GarageBand programs. In his spare time Joe produces the Joe Gore line of guitar effects and edits a geeky guitar blog (
Overdrive / distortion pedals are one of the most important effects on your board and are very much a personal taste. The ones on my pedal board change all the time, I have more than a few that I really like; Analogman King Of Tone, Pete Cornish SS-3, Ibanez Tube Screamer, Boss Blues Driver, Nobels ODR-1,  Zen Drive, MXR Distortion +... and I like and use all of them. Probably my all-time favourite os the King Of Tone, but on a budget, the Nobels ODR-1 is great value and runs with the very best!
Hi Chris. That doesn’t ring any bells I’m afraid. If your customer wants a new scheme I wouldn’t be afraid to replace the stock switch with a standard 5-way and then you know where you are. There’s always a chance that the Vigier switch is doing something funky and it started with slightly different pickup selections so the sound might change with a new standard switch. Obviously make sure you’ve got notes and photos so you can revert back to the stock wiring! Have you tried to buzz out the Vigier switch with a multimeter to see how it works? Alternatively, have you tried touching the pickup magnets with a screwdriver to see which pickups/coils are on in each switch position, that might give you some clues?

First of all, let’s clear up some minor confusion over the name. It has been variously reported, including by me, that the name “Teisco” stands for the name of a company in Tokyo; however this is not the case. Teisco was simply the name chosen by one of the company’s founders, Mr. Atswo Kaneko. There was another prominent company called the Tokyo Sound Co., Ltd. which was responsible for making Guyatone guitars, another major early Japanese brand, some of which came to the United States as Kent guitars imported by New York’s Bugeleisen & Jacobson and others. However, neither of these companies or their guitars had anything to do with the Teisco brand.
Tapping, in which both hands are applied to the fretboard. Tapping may be performed either one-handed or two-handed. It is an extended technique, executed by using one hand to tap the strings against the fingerboard, thus producing legato notes. Tapping usually incorporates pull-offs or hammer-ons as well, where the fingers of the left hand play a sequence of notes in synchronization with the tapping hand.