Of course, this top-down lecturing is all very abstract without examples. Let me give you the worst case scenario. My school talent show, 2008. Two friends of mine performED an ambitious but utterly inappropriate Metallica cover in front of the other students, their parents and the faculty. It was excruciating. Although the solos (presumably the only thing they had bothered to practice) were technically flawless, the whole song was undone by their terrible rhythm. The timing of the song became displaced, the chords were so badly fingered that it was difficult to hear the riff and consequently the whole performance fell apart. They looked like morons. They had sacrificed learning basic rhythm and paid the price. Make sure you don’t do the same.
I keep coming back to this point because it’s absolutely essential: learn how to solo over chords. I don’t mean simple chord arpeggiating, even though that has its place, too. If you can follow the chord changes with smooth, soulful playing, you will never be fenced in. You can drop into any style, any band, and any situation. Most of us get stuck playing a given scale pattern for years before something shakes us up. Make this the foundation of your learning with this book.
Fall 1954: both models have 2 volume and tone knobs, $39.95 and $59.95 respectively. The single cutaway bodies were made of solid Poplar wood, and are known as the "peanut" body shape at 11.25" wide. Then used a solid aluminum bar running from the peghead to the bridge for strength. "Coke bottle" pegheads are used that are 5/8" wider across the two "E" tuners than the later "Coke bottle" peghead shape. This model was also available under the Silvertone brand name with the "lightening bolt" peghead.

SG Special is pretty much the same thing as the Les Paul 100. The most obvious difference is the body style. Other than that, you get very similar electronics and overall build quality. A lot of people learned their first chords on this guitar, still keeping it as one of their favorite axes. I’ve played this thing a few times and it definitely has some juice.

If a player uses a separate preamplifier and power amplifier, she or he can buy a power amplifier intended for a sound reinforcement system or PA system or pick a power amplifier designed specifically for bass instruments. These preamps and power amps come in two formats: 19 inch rack-mountable units and units with their own wood or metal case. If a player uses a rackmountable preamp and power amp, these units and any effect units, such as an audio compressors, can be mounted in 19" rack mount road cases for safe transport. When a bass player selects a variety of different preamps, effects units and a power amp and puts them all in a rackmount case, this setup is colloquially called a "bass rig". Amp heads with their own wood or metal case may use many of the same appearance and transportation-oriented design features used on combo amps. For example, if a bass amp head is designed with a wooden case, it will typically have a vinyl, felt or sturdy fabric (or painted coating) to protect the wood case during transport; a carry handle; and corner protectors.

This article was tremendously helpful! My daughter is entering college for music therapy, and she is already an accomplished pianist but needed a more portable instrument to see patients. We have been scouting out guitars for some time and are looking to get a quality instrument without breaking the bank. Thank you so much for this well-researched article.

Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
the switch is to change pickups and the knobs are for volume and tone. u only need to mess with them if u want to change the sound of the guitar for various songs or styles of music. to tune the guitar u use the tuning pegs on the headstock (at the end of the neck). u need to tune it if it gets out of tune and make sure u replace the strings fairly often especially if u get a nice guitar like a les paul. old strings get tighter and can pull the neck and make it bow forward making it harder to push the strings down to the frets.

Six full steps (one octave) down from standard tuning. The Low E has the same fundamental frequency as a bass guitar, essentially the same standard tuning as a bass guitar but with a high B and E added to mimic a regular guitar. This tuning is used on the Fender Bass VI and similar instruments. Notably used by John Lennon with The Beatles, Robert Smith of The Cure and Jack Bruce of Cream. In his early days with Ronnie Hawkins, future Band bassist Rick Danko was also seen with a Fender Bass VI. This is the tuning Earth used on their seminal drone doom album, Earth 2. Also used in some Doom Metal and Sludge Metal bands such as Thou.
For many guitarists, the only thing better than a Gibson Les Paul is a vintage Gibson Les Paul. From stunning museum-quality pieces from the '50s to road warrior axes from the Norlin era of Gibson production in the '70s, there are fresh Les Pauls added to this page every day including Les Paul Standards, Customs, Juniors, and more. Whether you're a veteran Gibson collector or a new inductee to the ranks of Les Paul fandom, you can find your next vintage LP here.
The first electric instrument amplifiers were not intended for electric guitars, but were portable PA systems. These appeared in the early 1930s when the introduction of electrolytic capacitors and rectifier tubes enabled economical built-in power supplies that could plug into wall sockets. Previously, amplifiers required heavy multiple battery packs. People used these amplifiers to amplify acoustic guitar, but electronic amplification of guitar first became widely poplular in the 1930s and 1940s craze for Hawaiian music, which extensively used amplified lap steel guitars.[2]
{"pageName":"[gc] pdp: epiphone thunderbird iv electric bass guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: bass: electric bass","prop1":"[gc] shop: bass","events":"event34,event3,prodView","evar51":"default: united states","list1":"12-month,24-month,36-month","prop5":"[gc] shop: bass: electric bass: 4 string electric bass","prop6":"[gc] shop: bass: electric bass: 4 string electric bass","prop3":"[gc] shop: bass: electric bass: 4 string electric bass","prop4":"[gc] shop: bass: electric bass: 4 string electric bass","products":";113884849;;;;evar65=Used-Bass-Epiphone","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] product detail page"}
The Thunderhead had two humbuckers, gold hardware, a master volume with two tone controls, a pickup blender knob, and a phase reversal switch. Some had DeArmond pickups with metal covers, a large black insert with nonadjustable poles, plus six tiny adjustable pole screws along one edge. The ebony fingerboard was bound with diamond inlays and had the characteristic “mustache” on the end of the fingerboard. The tops and backs featured figured maple laminates. Colors options included a wine red, sunburst natural, and green (on Thunderhead only). The Thunderhead K-1360 had a trapeze tail, the K-1460 a vibrato. The Tornado (K-1160 with trapeze, K-1260 with vibrato) was a downscale version with plain top, chrome hardware, two volume and two tone controls (no phase), and the Schaller pickups.
{"eVar4":"shop: amplifiers and effects","eVar5":"shop: amplifiers and effects: effects","pageName":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: amplifiers and effects: effects","prop1":"[gc] shop: amplifiers and effects","evar51":"default: united states","prop10":"category","prop11":"distortion & overdrive effects pedals","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","prop3":"[gc] shop: amplifiers and effects: effects: effects pedals","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: distortion and overdrive effects pedals","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category3"}
The first National Dobro cast aluminum Hawaiians are probably relatively rare. They were probably only made for about a year, maybe less, from sometime in 1935 until sometime in 1936. By late ’36, the aluminum-bodied Supro laps (and the electric mandolin) had dropped from sight to be replaced by wood-bodied Hawaiians. The reason for discontinuing the aluminum steels appears to be related to the move. The aluminum castings and assembly were done in L.A. By late ’36, National Dobro had substantially relocated to Chicago (though an L.A. office was maintained until mid-’37), and it wasn’t economical to have them shipped all the way to Chicago. It was easier to make wooden bodies in Chicago, so after the move (by late 1936), National Dobro switched to wood-bodied Hawaiians.
Until the 1950s, the acoustic, nylon-stringed classical guitar was the only type of guitar favored by classical, or art music composers. In the 1950s a few contemporary classical composers began to use the electric guitar in their compositions. Examples of such works include Luciano Berio's Nones (1954) Karlheinz Stockhausen's Gruppen (1955–57); Donald Erb's String Trio (1966), Morton Feldman's The Possibility of a New Work for Electric Guitar (1966); George Crumb's Songs, Drones, and Refrains of Death (1968); Hans Werner Henze's Versuch über Schweine (1968); Francis Thorne's Sonar Plexus (1968) and Liebesrock (1968–69), Michael Tippett's The Knot Garden (1965–70); Leonard Bernstein's MASS (1971) and Slava! (1977); Louis Andriessen's De Staat (1972–76); Helmut Lachenmann's Fassade, für grosses Orchester (1973, rev. 1987), Valery Gavrilin Anyuta (1982), Steve Reich's Electric Counterpoint (1987), Arvo Pärt's Miserere (1989/92), György Kurtág's Grabstein für Stephan (1989), and countless works composed for the quintet of Ástor Piazzolla. Alfred Schnittke also used electric guitar in several works, like the "Requiem", "Concerto Grosso N°2" and "Symphony N°1".
Based out of Scottsdale, Arizona, Fender offers a few levels of quality of guitar, depending on where they’re made. Their high-end models are all made in the United States — as is designated on the headstock — while their less expensive models are made in Mexico. Most Fender guitars feature single coil pick-ups, lending to a very distinct bluesy sound with more twang and less punch than a humbucking guitar.
Hey Johnny, have just been reading your article which I found very interesting. My 11yr old daughter, a great ukelele player & an extremely quick learner, I am thinking of stepping her up to a guitar. The delimar is an acoustic or a bothie acoustic-electric, as she hasn’t established her style of music yet, thought a bothie would give her both options. Am hoping you could express some advise on what could be the best way of approaching this transition and a list of guitars to check out for her. I don’t want to be fooled and purchase a sh*t one so to speak! Greatly appreciate your time and advise. Thanks Jules
Just for fun, try taking this inverted approach to setting string height: instead of getting them as low as you can without inducing serious buzzing, set your strings as high as you can have them and still be able to play with some reasonable facility. Doing this correctly might also require adjusting string intonation at the bridge saddles, because their angle and distance across their speaking length is now changing slightly, too, but for now just try it as is, in case you choose to return your action to point one. (Note that raising string height at the bridge might need to be coordinated with a tweak of neck relief at the truss rod, although I will leave that to your own best judgment as there is plenty of debated between the flat-neck/slight-relief crowds, and this determination will depend upon your own preferences.)
I played a gig (to an empty house) at The Haunt in Ithaca NY. A lot of up and coming regional bands play there. We, on the other hand are just a cover band from Binghamton, about an hour away. While setting up, the sound man left a mic on the floor where I’d be setting up. I let him know that I send a direct signal. I could tell he wasn’t happy. After the gig though, he came and complimented me on my sound, saying that he didn’t expect a direct sound to be that good.
Finally, there was a mysterious lap – clearly Valco – which had no real National or Supro equivalents. This had tapered shoulders that swept down, wing-like, to the bottom, which had a little concave cutout. It was covered in ivory plastic on top, with black-lacquered sides. It had a rosewood ‘board with dot inlays. The pickup was the new exposed-pole single-coil with a bolt-on handrest, in front of narrow rectangular plate that held the saddle and attaching holes. Volume and tone knobs sat on little mini-plates on either of the strings. Another atypical downscale version of the National New Yorker was offered at the same time by Montgomery Ward.
The E-28 guitar now sported a two-octave fingerboard and a Schaller adjustable bridge/tailpiece assembly, in chrome. Pickups were twin active humbuckers specially designed for Martin by Seymour Duncan. The straplocking system was also by Schaller, as were the tuners. Controls included two volumes for each pickup plus a master volume and master tone (all with black knobs sort of like those found on Rickenbackers), a three-way select, a phase switch and an active circuit bypass switch. The headstock had an ebony veneer. The cover on the control cavity was made of black Boltaron.
Which is what you’ll be doing with the Omen-6: laying down heavy riffs and unleashing screaming solos. Two overwound Diamond Plus humbuckers are responsible for the guitar’s hot and thick output, while a thin “C”-shaped neck, 14-inch fretboard radius and extra jumbo frets keep things fast and comfy. Although this doesn’t have a tremolo for those dive bombs, a Tune-o-matic bridge and string-through body ensure your sustain will sing for days.
The process of setting up an acoustic guitar is not exactly the same as it is for an electric. New strings are usually added, and the amount of relief in the neck is adjusted as required, but the bridge adjustments are very different from the setup of an electric guitar. At the bridge of an acoustic, the strings are raised by a piece of plastic or bone that is known as a saddle, and are then anchored by individual pegs that are made of a similar material. When the intonation needs adjustment it usually means that you need to replace the entire saddle. Luckily this is a cheap and easy endeavor that isn’t likely to add to acoustic guitar setup cost. The saddle can sometimes be shaved at the bottom in order to lower the strings’ height (or “action”). Only someone with experience should perform saddle shaving, as it is very important that the saddle bottom remains even and flat. The cost of guitar setup for an acoustic is similar to that of an electric setup, though it may be cheaper at times due to the less complicated bridge.
The Hummingbird Pro's unique look breaks the typical monotonous appearance of conventional acoustics, and it does so without straying too far from the familiar. It is easily identifiable by its uniquely shaped ornate pickguard, which matches the guitar's faded cherry sunburst finish. Whether you are on stage or just jamming with friends, you can be sure that this acoustic will stand out.
Got myself a Palmer today 050627, it´s a doubleneck 12/6 and seems to be of rather good quality. Needs some neck adjustment but so did my brand new Gibson LP to :-). Mine was imported from Germany to Sweden from a firm called JJ Music (JoJo) but i also have trouble finding out were they are built, what kind of wood and so on is used. Would be nice if someone knew something about these guitars or were to find something about them on the net. I really don't want to disassemble the guitar to check what kind of mics and stuff are used.
The functional attribute of this guitar is not the only factor that it gets credit for. The instrument comes with a neck & body binding together with trapezoid inlays that produce the classic looks that you would always love to display on stages. These are features that are truly amazing especially when you are under the stage lights doing a performance both during the day as well as at night. Such nice appearance will obviously give you more courage to keep on soldiering on with your ambitions of becoming a professional guitarist.
The three notes of a major triad have been introduced as an ordered triplet, namely (root, third, fifth), where the major third is four semitones above the root and where the perfect fifth is seven semitones above the root. This type of triad is in closed position. Triads are quite commonly played in open position: For example, the C-major triad is often played with the third (E) and fifth (G) an octave higher, respectively sixteen and nineteen semitones above the root. Another variation of the major triad changes the order of the notes: For example, the C-major triad is often played as (C,G,E), where (C,G) is a perfect fifth and E is raised an octave above the perfect third (C,E). Alternative orderings of the notes in a triad are discussed below (in the discussions of chord inversions and drop-2 chords).

The GE-7 Graphic Equalizer is good to have after the overdrive in case you want to use it to scoop mids or bump certain frequencies for solos. (To show that these are not hard rules, it also works pretty well if the EQ is after the compressor but before the overdrive. But this changes how the EQ sounds, since you would be distorting it with the overdrive, so try it in the suggested position first.) Also, it’s good to have the EQ before the noise suppressor, since EQs can add noise as they boost tone at various points in the frequency spectrum, including any noise that is already there.
#5? Are you joking? I have a PR-200 that I've owned for 15 years. I hate it. The action is ridiculous unless your fingertips are made out of adamantium or whatever the heck Wolverine is made from. The sound is muddled and a clash of midrange. Sustain is nonexistent. The frets have flattened on the high strings. News flash- I'm not spending $350 to re-fret a $279 guitar. Epiphone may make some good high end guitars but I don't trust them. If you make crappy low end guitars why should I trust your brand? You were supposed to get me to fall in love with the brand but you've made me hate it. My next guitar will be a Yamaha, Martin or Taylor.

The initial single-pickup production model appeared in 1950, and was called the Esquire. Fewer than fifty guitars were originally produced under that name, and most were replaced under warranty because of early manufacturing problems. In particular, the Esquire necks had notruss rod and many were replaced due to bent necks. Later in 1950, this single-pickup model was discontinued, and a two-pickup model was renamed the Broadcaster. From this point onwards all Fender necks incorporated truss rods. The Gretsch company, itself a manufacturer of hollowbody electric guitars (and now owned by Fender), claimed that “Broadcaster” violated the trademark for its Broadkaster line of drums, and as a newcomer to the industry, Fender decided to bend and changed the name to Telecaster, after the newly popular medium of television. (The guitars manufactured in the interim bore no name, and are now popularly called ‘Nocasters.’) The Esquire was reintroduced as a one-pickup Telecaster, at a lower price.
{ "thumbImageID": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "defaultDisplayName": "Ibanez V70CE Acoustic-Electric Cutaway Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Violin Sunburst", "sku": "sku:site51418660054264", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Ibanez/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst-1418660054264.gc", "skuImageId": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000-00-60x60.jpg", "imgAlt": "" } ] }
Matt Heafy, of Trivium is working on a signature 6 string and 7 string Les Paul with Epiphone. Heafy has said that ‘(I) chose Epiphone, because I have to work my way up, from an Epiphone, Gibson USA, then a Gibson Custom. The thing is if it was a Gibson Custom, the kids would be paying $6000 for it, and they can’t afford that. I want it to be affordable but something I will use on stage”[citation needed]

So just to throw this out there- I've been trying to figure out how to set up electric guitars on my own for years and could never get it remotely figured out. At about 11:30 pm last night I decided to take a garbage fret buzzing machine of a guitar and try again. Your blog is the first time I've comprehended and successfully set up a guitar!! I'd buy you a six pack if you were in the neighborhood!

Here's some net info you may find interesting. Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (They may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. According to an article in Vintage Guitar Magazine, importation of Hagstrom-made Kents began in 1962. Another story is that Hagstrom sold Kent-branded guitars through distributors other than Buegeleisen & Jacobson in the U.S. without permission from J&B and were forced to withdraw them after a short time. By then Hagstrom had become better-known and could sell them under their own name, anyway. At first, the idea was to keep ’em cheap and sell to the beginners and students. Later, as Japanese manufacturers proliferated and competition became hot and heavy, some of them began to copy the Fenders and Gibsons of the time. As quality began to improve, some manufacturers again began issuing thier own designs. One of the “beginners” who got a start with a Kent Polaris I was Bruce Springsteen. Alex Lifeson of Rush got started with a Kent acoustic. One of Gene Simmons first guitars was also a Kent. The BBC series “The Seven Ages of Rock”, episode 2, showed Lou Reed (R.I.P) with the Velvet Underground playing a Kent 532 Copa at Andy Warhol’s hangout. Kent created a vib then and they're still doin it today.
• Wound Up: String windings directly affect tone and playability. Round wound strings have more “zing” – sustain, responsiveness and bite. Flat wound strings have a smoother and more consistent tone regardless of attack, which makes them a favorite of jazz players, like the great Gibson ES-350 legend Barney Kessel. Blues guitar kingpin Jimmie Vaughan also uses flat wounds for his vintage tone. And they offer less resistance than round wound strings, so they can be beneficial for rapid, even toned performance and squeak less.
Been in my attic for 20 years...kinda dirty...Rare Vintage Electric Guitar that i have never found an exact pic of on the web...seems like a Teisco Del Rey,but looks earlier than the 60's models ive seen...obviously needs cleaning an repair...but man this thing is cool...a great restoration project...the only marking is the patent number 31-4127 on the truss rod cover...or a Norma or Guyatone version...or just hang it on your wall as a great conversation piece
by pedalhaven Band board (2x THE VALUE) post from  @ahmcginnis  &  @rdmontgomery85 ! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
All of the guitars on this list except for the Blueridge BR-160 are equipped with an electronics system that make them stage- and studio-ready. You can simply plug and play when you need to perform in front of an audience in a crowded or big venue where there’s a lot of ambient noise. If you don’t need amplification – for example if you’re just practicing at home – these guitars sound great unplugged as well.

Boombox Guitar Tuner will get the party started. Just play a note, and it shows. Other guitar tuners don''t use the microphone, like Boombox Guitar Tuner, because it''s written with cutting-edge Flash 10.1 technology. Boombox Guitar Tuner is free to download or use online, so why waste your money on other expensive guitar tuners at the music shop? Try tuning your guitar once using Boombox Guitar Tuner, and you''ll see that it takes just seconds .
• Why size matters: Fret width and height affect playability considerably. Fret wire measures at .078 to .110 at the crown, or top, and runs between .035 and .055 high. Taller frets, at .45 and up, tend to make for easier string bending and produce clear notes without much pressure. The latter makes them ideal for high speed playing. The furthest point of that concept is the scalloped fretboard, employed most notably by Yngwie Malmsteen and John McLaughlin, who played a specially designed Gibson J-200 with scalloped frets and drone strings with the group Shakti.
You might initially think that Music Lab is narcissistic for creating a line of guitar VSTs with the word “real” in them. But after you hear the first note, you’ll be kicking yourself for doubting it. There is a lot to cover with the “Real” line, and since they share many of the same features, we will slowly go over the components of these VSTs throughout the reviews for them.  

Throughout the 40’s, racial segregation was still in force across America, however within the music community, (both listeners and musicians) race boundaries were beginning to disappear. African American music (a.k.a ‘Race Music’) was popular with white communities too and with the vast melting pot of musical styles by that point including Folk, Country, Jazz and Delta blues, something exciting started to take shape.

Ironically, the sound of certain synthetic reverbs is now such an established part of music history that most convolution reverbs come with some IRs taken from existing hardware reverb units or from old mechanical reverb plates. Also, if you have a convolution reverb, it is worth checking the manufacturer's site, as additional IRs are frequently available for download.
String Tension: Acoustic guitars must be built stronger, because the tension of the metal strings is approximately twice that of nylon. This is done with bracing. Any acoustic guitar top must be thin enough to resonate, but so thin that the top alone could not hold it together against the string tension. The bracing adds strength with a goal of minimal damping of resonance. Bracing patterns vary widely, but most Spanish guitars use "fan bracing" and most acoustics use "X bracing."

Chorus pedals actually make your guitar sound like there are a variety of different guitarists playing the same thing that you are playing, but with a different guitar and slightly out of time with you. This effect makes everything you play sound a little bit ‘warbly’ and thickens up your guitar or bass lines. We recommend experimenting with these as you can use them subtly to add weight to your sound or as a full-blown effect that completely takes over your signal.
Many amplifiers have effects built in, but even those that do are no substitute for a well-equipped pedalboard. There are literally thousands of effects to choose from, some of which (like the Boss TU-3 Chromatic Pedal Tuner) are more like accessories that don't directly impact your sound. Others will transform it completely. For example, two of the most popular effects are the Fulltone OCD Obsessive Compulsive Overdrive Guitar Effects Pedal and the Ibanez TS9 Tube Screamer Effects Pedal - these are both overdrive pedals, and together with a good amp, they'll take an electric guitar's sound from its default, vintage-like tone all the way to the high-powered distortion of a modern rock anthem.
Primarily, reverb pedals tend to give you a lot more variety and control over the effect than you'll have with an amplifier. In fact, most amps that have reverb will have a single reverb knob that you turn up for more of the effect, or down for less. This can work if you use reverb sparingly, but if you're into the effect and like to use it a lot, that's not enough control to really get the most out of your reverberated tone.
What's funny is that guitars with cheap pickups very often sound better direct than guitars with "good pickups". I have an Epiphone Special I with ( presumably GFS ) P90-style pickups and that thing sounds great direct. It's also fine with a band thru an amp if the band doesn't play too loud - if the band's too loud the low mid buildup means you gotta EQ a lotta bass out and it loses it's girth.
The Wire. You'll see a lot of vintage spec wordings bounced around here and that pretty much boils down to the aesthetics. Those early Fenders and Gibsons we all know were wired at the original factories with a cloth covered 'push back' wire, whereas as some modern factories, far east predominantly use standard plastic coated wire today. But the important detail is the 'AWG', or American Wire Gauge. Widely used in the guitar world for optimal results, is 22AWG wire. I would go into detail on this, but THIS site has some superb facts about AWG, which if you'd like to find out more I'd recommend a read of! So back to the cloth/plastic thing. Personally, the 'push back' cloth wire is much easier and tidier to work with and I fully hold my hands up to saying it looks much better too. I always use this for any guitar wiring, the results are always great and it's a pleasure to wire up with. I personally use 22AWG copper, solid core wire, great to work with and consistent. 

Designed by Todd Langner (who also engineered the ADA MP-1), the Langner DCP-1 possesses somewhat of an infamous reputation. Very few know about it, but everyone who does, swears by it’s greatness. Built with much of the same blueprint as the Bogner Fish, the Langner features two independent channels with fully adjustable boost functions. Using five 12ax7a tubes, it’ll produce the glassiest cleans to the highest of high gain tones. Presets can be front panel selected or footswitched. If you’re into rare gear, this is the amp for you. Good luck finding one!
Jimi Hendrix: Right-Handed vintage white body flipped upsidedown for left-handed use with an oval profile maple-cap neck. The controls and electrics are vintage-modern to ensure stability. The guitar is strung upside down with the strap button on the lower horn, the backwards 68 thick black CBS headstock decal is so that—in front of a mirror—the player sees the guitar as it would appear if Jimi Hendrix played it. As well as this upside-down lefty Strat for right-handed players, Fender also made four exact copies of the Vintage white Stratocaster Hendrix used in many performances, the most famous being Woodstock (1969).
In the fall of 1954, Daniel started production of solidbody guitars for Sears, under the Silvertone name. He also produced the same guitars under the Danelectro name, sold to other jobbers. These early models didn't have truss rods but had a 3/4" square aluminum tube beginning at the peghead and through the body to the bridge. The bodies were constructed of solid Poplar wood. The Silvertone models were covered with a dark maroon vinyl covering, while the Danelectro models were covered in a whitish tweed material. Both lines came with either 1 or 2 pickups, concealed under a baked melamine pickguard. Concentric stacked tone and volume knobs were used on the two pickup models only. Notably, when both pickups were used together, the tone was much stronger. This was due to wiring the pickups in series, instead of parallel like most other maker's two pickup guitars.
Capacitors used in guitar circuits aren’t polarised, so it doesn’t matter which way round you fit the legs - we normally go with the printed side facing out from the pot. They’re measured in microfarads (uF) and will be marked with a number. You can experiment with different values and materials for different results, but if in doubt, just swap it for what you already have.
An electric guitar is a guitar that uses one or more pickups to convert the vibration of its strings into electrical signals. The vibration occurs when a guitar player strums, plucks, fingerpicks, or taps the strings. The pickup used to sense the vibration generally uses electromagnetic induction to do so, though other technologies exist. In any case, the signal generated by an electric guitar is too weak to drive a loudspeaker, so it is fed to a guitar amplifier before being sent to the speaker(s), which converts it into audible sound.