@Christos – As mentioned in the article above, wherever they sound good to you is the best place to put them! However, traditionally people tend to put filter pedals near the beginning of the chain (like wah pedals), and volume pedals as well. An EQ can go first if you just want to EQ your guitar signal before running into your effects, or last if you want the EQ applied to your entire signal chain, or somewhere in between. It really depends on what you personally are going for.

The Japanese guitar industry in the '60s and '70s followed an interesting trajectory. At first, Japanese factories were tasked with building cheap emulations of American designs. As time went on, their output grew more unique and bizarre due to a particular Japanese artistic flair combined with an impulse to out-do mainstream American guitars they were emulating. This resulted in wild models from the likes of Teisco which featured exaggerated body angles and totally unique finishes and pickup configurations. Moving into the mid-'70s, the craftsmanship found at Japanese factories like the Fujigen plant rivaled that found in the US. This ushered in the controversial "lawsuit era" where Japanese brands like Ibanez built extremely close replicas of Fender, Gibson and other guitar brands.
Compared to, say, an Epiphone Dot, the Coupe offers a ‘woodier,’ more acoustic timbre. “Sparkly,” “bell-like” and “jangly” are descriptors often associated with the guitar and its stock pair of P-90s, and cranking the gain up elicits more a sizzle than roar. Be careful with the distortion, though—without a center block like those you’ll find on semi-hollows, the Coupe is still fairly susceptible to feedback.
There was a question from Benhur about Cort. If you lived in England you may know them better. They are an Indonesian company who builds many of the lower price point guitars for the big names like G&L and Fender just to name a. Few. Lower price doesn’t always mean less quality. Cort has a following in their own skin, and many with other well known names just may not know they are playing a Cort.
Eric Clapton: select alder body with a special soft V-shaped maple neck/fretboard, 22 vintage-style frets, three Vintage Noiseless pickups, 25dB active mid-boost circuit and a “blocked” original vintage synchronized tremolo. Available in olympic white, pewter, candy green, torino red (Artist Series), Antigua burst, gold leaf, EC grey, daphne blue, graffiti canvas, mercedes blue, black and midnight blue (Custom Artist), as well in olympic white, torino red and pewter with a “Thinskin” nitrocellulose lacquer finish (Custom Thinskin Nitro).
A direct line can be drawn from “Rumble” to “My Generation,” “Anarchy in the U.K.” and “Smells Like Teen Spirit.” The song is often credited as the origin of the power chord, but it also heralded the transformation of rock from the music of youth to the soundtrack of juvenile delinquency. Several radio stations banned “Rumble” because they thought it was too sexy, raunchy and violent. Wray even dressed like a juvenile delinquent, embellishing his greasy black pompadour with a leather jacket, jeans and shades at a time when most white rock and rollers still took fashion cues from Perry Como and Bing Crosby.
While hollow guitars are best suited to jazz, there have been a handful of cases where rock musicians have utilized fully hollow jazz box guitars in rock and roll. Chief among these would be Ted Nugent, who actually used the excess feedback produced by his Gibson Byrdland as a musical tool. Hollow ES-335 style guitars are used in blues and rock more frequently than the jazz box (the Beatles used the Epiphone Casino extensively), though because of the feedback they produce most musicians stick with semi-hollow instruments.
This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.
In some small to mid-size venues, such as bars and nightclubs, the PA system may not have the capacity to provide the bass sound for the venue, and the PA system may be used mainly for vocals. Bass players in bands that play at a variety of venues, including these types of small to mid-size venues, may need to be able to provide the bass sound for the venue, and so they will require a large combo amp or bass stack with this capability.
Recently while cruising around EBay I was able to find pretty strong evidence that the 700 and 800-series Kents were made by Kawai. Or maybe... the necks of the 700 and 800-series Kents and the Kawais were made by the same manufacturer. I don’t know if Kawai kept the factory that made Teisco operating after it was acquired. It appears that Kawai had more experience building hollow-bodied guitars than Teisco. So I call the 700 and 800-series Kents Made by Kawai. You can call them Made by Teisco if you want. Of course, the possibility exists that they were both made by an entirely different company. Who knows? The 1960’s were like a ‘wild west’ period of Japanese guitar making.
Johnny Thunders’ snot-nosed New York take on Keith Richards’ cool is one of the pillars on which punk rock was built. An Italian-American guy (birth name John Anthony Genzale Jr.) from Queens, he was born a little too late to be part of the Sixties rock explosion. But the bands of that era were his influences, and he put his own spin on them in the early Seventies as the New York Dolls came together with Thunders on lead guitar.
: Values? Well, with the prices of 1960s American and British guitars through the roof, collectors and musicians turn to the next-best-thing, and that would be European and Japanese guitars. In general, any made-in-Japan solid-body electric guitar in good cosmetic shape, that's complete and playable, is worth at least $100, and any acoustic-electric, at least twice that. The more pickups it has, the more elaborate the controls, and the more flashy the pickguard, the more it's worth. Same goes for the body and headstock shape. The standard shapes that copy Fender and other manufacturers aren't as desirable as some of the weirder shapes. A Decca solidbody with an unusual body shape, with 3 pickups and an unusual original finish would probably be in the $250-350 range to the right person. An acoustic-electric with the same specs would probably be worth $100 more than that. I've seen some of the exceptional Teisco solidbodies go for $500-600, but that's uncommon. In about 2006, I saw a Teisco (one of their Mosrite copies) from about 1967 that was in flawless condition for sale in an instrument shop in Tokyo for 200,000 Yen (about $1,900). I wouldn't be surprised if it sold for that.

I started using cobalt .010 and I've found they have plenty of clarity and bite. Please keep in mind there are many factors going into your sound. Amp, guitar pickups, strings, pick type, etc. Don't be disappointed if you get some premium strings that don't change your sound if your pickups can't pick up the movement very well. Start at a regular light. .010 is plenty flexible, and they won't break as often as a 8 or 9. Don't get caught up in the rookie mentality of "THIS is what kind of guitarist I will be, so I need everything to fit that." Experiment with different sizes and types.
Basicly it is a HD digital sound interface plus with a MIDI controller and footswitch. It is has unique design with different HOST mode and switching MODE to work with the host softwares. We are proud of that it is now maybe the best thing you can find to use on stage with software FX. The special designed analog signal chain mixing with the digital codec give the best dynamic response and sound quality. We did AB with lots of other interface and be so confident on its performance.
There are a few things to look for in modestly priced amplifiers: at least a 3-band equalizer or EQ ( low, mid, and high), a clean channel and an "overdrive" channel, reverb, and possibly some sort of "presence" control. There are two types of amplifiers: tube and transistor. Many playes prefer tube-style amps, but they can be problematic technically. Just be aware of that.
PLUG THE PORES What you use to prep the body for paint depends on the chosen finish that you will go with. For a solid color finish you will want to fill any of the pores with a wood filler or Bondo glazing putty. I prefer Bondo because it dries quickly and sands smooth. Use one of those plastic speaders that you can get for mud at a paint or hardware store and press the filler firmly into the pores and gaps in the wood. Cut diagonaly accross and against the grain to fill the pores and gaps better. Use a sanding block and a 220 grit paper and after the filler dries to ensure an even flat surface. Only use your hands to lightly sand on the rounded edges or hard to reah areas of the guitar. The roundness of your fingertips can cause depressions in the woods surface so stick with the sanding block on the flat areas. Inspect the surface to see if any pores or gaps remain and repeat the steps if needed. Then clean the surface with a tack cloth to remove any dust.
Cort, a South Korean manufacturer of musical instruments was founded in 1973. Cort specialises in Electric guitars, Bass guitars and Steel-string acoustic guitars. The hallmark of the company is its elegant series of Electric guitars. The Classic rock series, G, M, CR and X series guitars, Sunset series and Zenox series form part of the list. These guitars not only deliver high performance, but also have a great look and feel. It has established its brand name in Indian market by offering high-class products at affordable prices. The company is amongst the best guitar brands in the country.
The 1952 Les Paul featured two P-90 single coil pickups, and a one-piece, ‘trapeze’-style bridge and tailpiece, with strings that were fitted under (instead of over) a steel stop-bar.[note 3] The weight and the tonal characteristics of the Les Paul were largely due to the mahogany and maple construction: maple is a hard and quite heavy wood, but was restricted to a cap over somewhat lighter mahogany, to keep weight under control.[note 4] In addition, the early 1952 Les Pauls were never issued serial numbers, did not have bound bodies, and are considered by some as “LP Model prototypes”. However, the later 1952 Les Pauls were issued serial numbers and also came with bound bodies. Interestingly, the design scheme of some of these early models varied. For instance, some of the Les Pauls of this issue were fitted with black covered P90 pickups instead of the cream-colored plastic covers that are associated with this guitar, even today. Of note, these early models, nicknamed “Goldtops”, have begun to gain the interest of collectors, and subsequently, the associated nostalgic value of this instrument is increasing.[note 5]
Unfortunately it’s during this critical time that a lot of people get discouraged and may even give up on playing altogether. The first 6 months of learning guitar are critical, statistics show that if someone can still be playing at 6 months they will be much more likely to go on to play guitar for life, so the first 6 months are actually the most important time.

I like...So fun...I am a big fan of the call of duty games - this one is a step above my son loves it and I do to but he is a lot better at it than I am - it is a challange for someone new to playstation...Well first starters died about ten times just beginning in campaign and yea even though I have it on regular mode it still is a challenge for me signs of I'm getting to old for this lol but there snippers on story mode when you concentrate it slows down all the enemies but give it a shot your self I like it
If you see "PM," play using palm muting. For standard right-handed guitar playing, gently lay the edge of your right palm across the strings near the guitar's bridge. When you strike the notes (with the same hand as is providing the mute), you should hear the tone of the note, but with a subdued, dead quality. Move your hand slightly up the strings toward the neck to deaden the notes more.
Martin is a famous America-based company known for is a variety of impressive electric and acoustic guitars. Their guitars are predominantly manufactured in Pennsylvania and Nazareth. The history of Martin guitars dates back to 1833. From then on, Martin has managed to maintain classiness and quality in their guitars to satiate the thirst of pro players in America.
Dissatisfaction with vintage units of this type usually centers around their limited gain, and their inability to sound truly fierce with Drive cranked up to full. The more exemplary users of this type of pedal, however—such as Stevie Ray Vaughan or Eric Johnson, who were both masters of early Tube Screamers—usually kept the Drive control in the lower part of its range, where the sound remains more natural and, yet again, serves as an excellent pre-boost to drive a good tube amp into distortion when the Level control is set high enough. Some players also find older pedals built to this design to have a distinct midrange hump, a slightly wooly tonality, and/or a lack of low end (as ever, depending upon the ears of the player you talk to). Consequently, a lot of newer makers have accounted for these in their redesigns. Visual Sound’s Route 66 pedal has a Bass Boost switch, Ibanez’s own recent-era TS9DX Turbo Tube Screamer has a Mode control that takes you from classic sounds to settings with more distortion and more low end, and plenty of other makers address both in their variations on the circuit.

Another application of a fuzz pedal is available when the user has control over the the amount of feedback signal routed back into the transistor loop while the pedal is engaged. By configuring the feedback to more sensitive levels, the pedal will feed back into itself causing oscillation*. As the pedal oscillates, certain frequencies will be produced, causing a singing sustained note without the guitarist playing anything at all. The player can consequently play over the note produced to cancel out the feedback loop, but once the player stops the pedal will feed back into itself producing the configured signal once again.
On top of that, the Champion 20 offers built-in effects, including reverb, chorus, flanging, delay, auto wah, vibrato, and tremolo. All of these effects can be chosen using a single knob, with an additional FX Level knob to control the mix of the unprocessed sound with the effect. These effects can’t match the flexibility and adjustability of separate effects pedals—for example, with the exceptions of reverb+delay and reverb+chorus, effects can’t be combined—but they can at the very least give beginners an idea of how these effects work. Many guitarists may find the Champion 20’s built-in effects to be all they need.
There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."
I have to say I'm really impressed with the Obsidian HSS wiring harness, The build quality is top notch, and the simplicity to install really delivered.It only took a few minutes to connect and be up and running. I love to customise my guitars and love to play around, so having the ability to swap out pickups without a messy soldering iron is fantastic, and the wiring is super clean giving a professional finish. I'll be intending to use the obsidian wiring harness in future project guitars -I highly recommend- Guitar sounds great ( oh did I mention the extra guitars picks too. nice touch)" - Ricci Custom HSS Strat® Wiring
The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.

Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.

The Ibanez Tube Screamer is the industry standard for overdrive pedals. Kicked into legendary status by the late great Stevie Ray Vaughan. The Tube Screamer TS808 was first released in the late 70’s and now catches a small fortune on the vintage market but fortunately there are reissues and many boutique clones out there. The Tube Screamer is not the only overdrive circuit of course, there are many excellent options, it is just clearly the most famous. What makes the TS so cool is the way it interacts with an already overdriven amplifier. It can add a nice amount of gain, sustain, and tonal shaping options. They do provide a bit of a boost in the mid frequencies that many people love as it helps to cut through a band. The list of TS users is extensive but Stevie Ray is the most notable.

Like many others, Frenchman Patrice Vigier started with a guitar repair shop before establishing his own company in 1980 in order to introduce his first instruments from the Arpege series. The trapezoidal, neck-through body construction is reinforced by a metallic sublayer. One of the models has a metal fretless fretboard, electronic supply by accumulator and a locking string-through body bridge. The Excalibur series was born in 1991 and features a bolt-on neck and a Floyd Rose tremolo system. Available in different variations, it remains the brand's signature up to this day. Vigier instruments are entirely made in France following a quality-oriented philosophy. Among the artists playing Vigier guitars are Gary Moore and Bumblefoot.
Judging by the tag in the sound hole, headstock logo, and general construction of the guitar I would think it's definite made earler than '86. Mine has a tag identical to this one but the date 16 5 78 is stamped onto it and it also has the name of the person who inspected it stamed on it. Interestingly I did notice your guitar has a different truss rod construction than mine. looks like yours adjusts from the head stock under the cover and mine is an allen adjustment through the sound hole. Don't know if they switched over to your style at a later date... food for thought. I have heard of some poeple reffering to these as Yairi built guitars even though they don't carry the Yairi headstock logo.

The Marine Band 365 Steve Baker Special (365/28 SBS) possesses the same construction as the original 365, but with low pitched tuning to their natural major keys, available in C, D, G, A, and F. It is named for, and was developed in part by noted harmonicist Steve Baker, who resides in Germany and has contributed to the design of several other Hohner harmonica models, including the Marine Bands Deluxe and Crossover.[18]
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.
To find which Ernie Ball strings are right for you, the key is experimentation. Figure out which strings sound best to your ear, feel best on your fingers, and most importantly enable you to create the music you want. When you are ready to buy, head over to one of the 5,500 music stores that carry Ernie Ball products. You can discover these stores by visiting our Store Locator.
4.) Check the guitar’s string height by pressing down on the first, second, and third fret. You should be able to do so with minimal effort. Come to the 12th fret and press down. The distance from the top of fret to the bottom of the string should be no more than three times. If it is five times, the guitar may have a warped neck or too high of a bridge.
Stewart MacDonnald has a great finishing schedule that I would recomend reading before you start the painting process. You shouldn't need to fill any pores on the neck because necks are usualy made from maple which is a tight grain wood. All that's need for it is a sanding with 220 grit paper unless you want to leave the neck natural and unfinished. I recomend using at least a few coats of sanding sealer of clear gloss laquer to protect the wood fromdirt and grime that comes from playing.
Specs for your guitar include an ash body and carved maple top (rosewood was an option) bound with an abalone border, and a 5-piece maple/rosewood through-body neck. Other features include the bound 22-fret ebony fretboard with brass circle inlays, a matched-finish headstock with abalone border, 3-per-side tuners, two exposed humbuckers, and controls for each pickup. Its ivory finish is probably the most desirable color for this model, but the guitar was also available in a natural finish that highlighted the maple or rosewood carved top.
COST – I have touched upon this topic several times maybe but I feel like I need to reiterate. Amps are usually not a cheap thing to come by, especially if you want a tube amp. BUT practice amps are good because they help beginners develop their skills without having to spend several hundred. Needless to mention, even practice amps come at various prices. For instance, Donner Electric Guitar Amplifier 10 Watt Classical Guitar AMP DEA‌-1 we talked about is twice as cheap as Roland CUBE‌-10GX 10W 1×8 Guitar Combo Amp. While price often is a good guideline to which model is better you should always keep in mind that more famous brands will have more expensive models even in the cheap sections. Apart from that, keep in mind that an amp having a lot of great features and effects does not mean it’s good.  
Just wanted to get back with a thank you note. I received the kit last week and installed it in my Stratocaster with Texas Special p'ups. It's absolutely brilliant. Not only is the Blend control a superb new addition to the tonal options, but the pots also feel so sturdy and smooth. Feels like I have some custom build now. Just amazing, thank you! In addition, the treble bleed mod is the icing on the cake. I’m no longer afraid to roll down the volume knob." - Andrei Custom Blender Mod for Strat®  
Ihave a 12 string dorado. I found a guitar that was sold for $299. It's a 12 string acoustic, Gretsch, 1971. Seems like the right period. The problem is that it is called doraldo. One letter out. Rosewood fret board, dot inlays. Exactly the same as mine but different name. Maybe it could be the same? Go to http://www.rabbithillmusic.9cy.com/id2.htm
In 2008, Gibson USA released the Slash Signature Les Paul Standard, an authentic replica of one of two Les Pauls Slash received from Gibson in 1988. It has an Antique Vintage Sunburst finish over a solid mahogany body with a maple top. Production was limited to 1600.[35] The Gibson Custom Shop introduced the Slash “Inspired By” Les Paul Standard. This guitar is a replica of the 1988 Les Paul Standard and it features a carved three-piece maple top, one-piece mahogany back, and rosewood fingerboard, with a Heritage Cherry Sunburst finish. Two versions were made available—the “Aged by Tom Murphy,” aged to resemble the original guitar (a limited number of these were signed by Slash in gold marker on the back of the headstock), and the “Vintage Original Spec,” created to resemble the guitar as it was when Slash first received it.[32][36]
The 2008 Les Paul Standard sports a revolutionary enlarged neck tenon designed by Gibson’s team of pioneering engineers. The expanded neck tenon features an innovative interlocking joint that allows the neck to be dropped into the body from the guitar’s top side, as opposed to sliding the neck in from the rim. When the glue is added, a solid unyielding bond is created that maximizes the wood to wood contact between the neck and the body, offering increased stability and superb transfer of vibration for enhanced tone, improved sustain, and superior resonance. It is also the largest neck tenon in the history of the Les Paul.
Wonderful and excellent nicely summarize how the market feels about the Washburn WL012SE. Many are impressed by its solid build, while others are into it for the aesthetics. It also gets plenty of love for its build and sound quality. Even experts like Ed Mitchell of Music Radar have mostly good things to say, he concludes his review with this statement: "The WLO12SE is a beautifully realized reminder that you should take the time to narrow your search and find a playing experience and tone that suits your needs perfectly."

We have done hundreds of guitar 'set-ups' / repairs / restorations over the years and know how to do them to a degree that 95% of 'players' will be very satisfied. We're not just changing strings and polishing. We'll check and adjust the neck for correct string height at the 7th fret (should typically be about the thickness of a .010 gauge 'E' string when fretted at the first fret and the 12th fret). We also check for a 'body bump' in the neck as if that can't be addressed to a 'playable' degree, then the balance of the adjustments will be for naught. As we're in a very dry climate, we will check for 'fret overhang' due to neck shrinkage and 're-dress' the frets accordingly. If it's a 'bolt-on' neck, we'll check for neck joint / screw integrity and repair as necessary. We check and adjust for correct intonation using our 'Peterson' strobe tuner and our other 'analog' tuner. Electrics are typically intonated with 'fresh', .010 strings installed (if you want it intonated with a different gauge, just let us know). We inspect and test the electronics, especially looking for any 'aftermarket' re-wiring / mods / incorrect repairs. We inspect the integrity of the tuning machines and repair as necessary. Of course we do all the standard cleaning, adjusting and test playing once the 'basic integrity' of the instrument has been addressed.

Why We Liked It - Whether you want to find an electric guitar to play sweet country tunes or something completely different, this is a great guitar! It’s extremely versatile and is therefore one of the best ones we’ve tried for beginners so far. That doesn’t mean it can suit more advanced musicians and many other skill levels as well, but especially for beginners, versatility is key.
Description: Body Construction: Solid - Neck Attachment: Bolt - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Dot - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 5-Way Switch - Pickups: Humbucker - Pickup Configuration: H-S-H - String Instrument Finish: White, Black, Red, Sunburst
Guitar is well made. Sounds awesome. The overall height of the strings (in relation to the frets) were not bad. However, it needed to be setup. After having the guitar setup at my local shop, it is so much easier to play (don't have to press as hard on the strings). The Guitar gig bag that comes with the bundle offers zero padding. The Tuner works well, however, since the guitar comes with a built-in tuner, you don't need a separate one. I have not used the dvd that came with it. I use a different set of instructional dvds (purchased separately). Overall a great guitar. Definitely recommend it.
Lastly, if what you're really asking is "Can I play my electric guitar without making any noise that would bother my neighbors/housemates?" Many amps and all direct in setups will allow you play with headphones. I plug headphones in a small tube amp. The sound is quite nice. I find this setup allows me to experiment even more than usual since I am not self conscious about anyone hearing what I am playing. I've seen little tube amps for as little as about $125 that have headphone jacks. At that price don't expect Fender, Dr Z, Vox, Marshall or Mesa Boogie quality sound, but they get the job done of basic tube drive and bypass the loudspeaker by driving the headphones.
{ "thumbImageID": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black/430855000011000", "defaultDisplayName": "Epiphone Les Paul Special II Plus Limited Edition Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black", "sku": "sku:site51275425411034", "price": "214.99", "regularPrice": "214.99", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black-1275425411034.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black/430855000011000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Black/430855000011000-00-60x60.jpg", "imgAlt": "" } , { "name": "Transparent Blue", "sku": "sku:site51275425411029", "price": "229.00", "regularPrice": "229.00", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Blue-1275425411029.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Blue/430855000012000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Transparent-Blue/430855000012000-00-60x60.jpg", "imgAlt": "" } , { "name": "Heritage Sunburst", "sku": "sku:site51275425411031", "price": "234.99", "regularPrice": "234.99", "msrpPrice": "348.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Heritage-Sunburst-1275425411031.gc", "skuImageId": "Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Heritage-Sunburst/430855000191000", "brandName": "Epiphone", "stickerDisplayText": "Clearance", "stickerClass": "", "condition": "Clearance", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-II-Plus-Limited-Edition-Electric-Guitar-Heritage-Sunburst/430855000191000-00-60x60.jpg", "imgAlt": "" } ] }