Just like in a conventional guitar, an electric guitar also has 6 strings with tuning knobs and frets. However, unlike the hollow body and cavity of an acoustic guitar, a solid body usually forms the lower part of an electric guitar. The long neck of the electric guitar consists of magnetic pickups, parts which produce the magnetic field and which are located just below the metal strings. The magnetic pickups are connected to the amplifier with an internal electrical circuit. The long neck of an electric guitar also consists of knobs for adjusting the elasticity of metal strings.
Seagull Guitars is a sub-brand of Godin that utilizes their modern design and production capabilities in building classic looking instruments. The S6 Original exemplifies what the company can do, combining Godin's build quality and attention to details with old school aesthetics and playability, and it does all of this while retaining a very reasonable price tag.
CHEVALET HARDTAIL Pour remplacer les cordes, faites passer les nouvelles cordes à travers les passe-cordes qui se trouvent au dos de la guitare et faites-les ressortir par-dessus les pontets. L'intonation peut être réglée en déplaçant le pontet vers l'avant ou vers l'arrière, en utilisant un tournevis cruciforme (+) pour ajuster la vis de réglage de l'intonation, située à...
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]
I spoke with Matt “M@” Picone, of Fractal Audio, about the increasing use of modelers for today’s biggest acts. Their flagship modeler, the Axe-FX II XL+, is used by bands as diverse as U2, King Crimson, and Taylor Swift. Increasing numbers of top-level guitarists are discovering Fractal’s dozens of effects/amps/cab/microphone models and the obsessive tweakability inherent in their designs. In the credits of Fractal’s products, Matt Picone is listed alongside Cliff Chase, the company’s founder, president and DSP/Hardware engineer, as contributing to “everything else.” He says that title suits him because it spans a range of duties including support, artist relations, brand development, sales, marketing, PR, sound design, docs & manuals, e-commerce, business development, infrastructure and much more. Their products are not just for ultra rock stars, as Matt explains:
Most Fender guitars are equipped with single-coil pickups. They have a lower output level than dual-coil pickups but sound brighter and sharper, which is perfect for clean and crunch sound. Both the Telecaster and the Stratocaster generally have an ash or alder body, a maple bolt-on neck and a rosewood or maple fretboard. Some other Fender models were also moderately successful (the Jazzmaster, the Jaguar or the Mustang). Squier, a brand that originally manufactured strings, was bought by Fender to become a sub-brand and sell guitars manufactured in Japan from 1982 onwards.
While hollow guitars are best suited to jazz, there have been a handful of cases where rock musicians have utilized fully hollow jazz box guitars in rock and roll. Chief among these would be Ted Nugent, who actually used the excess feedback produced by his Gibson Byrdland as a musical tool. Hollow ES-335 style guitars are used in blues and rock more frequently than the jazz box (the Beatles used the Epiphone Casino extensively), though because of the feedback they produce most musicians stick with semi-hollow instruments.
Dismantled Fender Telecaster neck pick-up, showing the exposed enammeled, very fine, copper wire, wound on a bobbin around 6 magnets sitting below each string. From Mojo Pickups - 50's Telecaster Rewind. In case you are wondering the metallic case (used to be high-chrome content alloy) acts as a hardware low-pass filter, dispersing the magnetic field of the high frequency vibrations of the string across all 6 poles, but allowing long wavelength, low group velocity, bass frequencies to be captured relatively unhindered— the reason for this is quite complicated and the subject of a solid state physics class which we will not go into here.
Choose a pedal kit or two from one of the kit suppliers. If you are new to this, start with one of the simpler kits such as a boost pedal. You can move on to more complex circuits such as delays and reverbs later. You can order multiple kits at once if you want, but learn your skills on the easy ones first. Good kits come with comprehensive documentation. They normally list the tools that you will need, so read the docs online first and make sure you have the tools available. If not, order them at the same time as your kits so you’ll have everything ready. It’s very irritating when you are keen to get started on a pedal project and are missing that one small tool or part.

The PRS Silver Sky is the result of a close collaboration between Grammy Award-winning musician John Mayer and Paul Reed Smith. More than two and half years in the making, the Silver Sky is a vintage-inspired instrument that is at once familiar but also newly PRS through and through. This model was based off of Mayer and Smith’s favorite elements from 1963 and 1964 vintage instruments, resulting in an idealized version of a vintage single-coil guitar. The attention that was paid to every detail sets this guitar apart.
There are a few things to look for in modestly priced amplifiers: at least a 3-band equalizer or EQ ( low, mid, and high), a clean channel and an "overdrive" channel, reverb, and possibly some sort of "presence" control. There are two types of amplifiers: tube and transistor. Many playes prefer tube-style amps, but they can be problematic technically. Just be aware of that.
The guitar builder for the giants of jazz, Ibanez now introduces the Artstar AS153 Semi-Hollow Electric Guitar, to answer the needs of the working professional player. Crafted from specially selected tone woods, this guitar features a bone nut, ebony fingerboard, hand-rolled frets and Ibanez's famous Super 58 pickups-capable of tone magic any place...  Click To Read More About This Product
{"eVar4":"shop: books sheet music and media","eVar5":"shop: books sheet music and media: tablature","pageName":"[gc] shop: books sheet music and media: tablature","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: books sheet music and media: tablature","prop1":"[gc] shop: books sheet music and media","evar51":"default: united states","prop10":"category","prop11":"tablature","prop5":"[gc] shop: books sheet music and media: tablature","prop6":"[gc] shop: books sheet music and media: tablature","prop3":"[gc] shop: books sheet music and media: tablature","prop4":"[gc] shop: books sheet music and media: tablature","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category"}

But the avant-garde din of Velvet Underground rave-ups seemed a genteel curtain raiser compared with the full-bore cacophony of Lou’s 1975 solo opus Metal Machine Music. The noise-guitar side of Lou’s legacy set the stage for cutting-edge genres like industrial, art damage, dream pop, grunge and present-day noise exponents, like Wolf Eyes and Yellow Swans.
These pedals are different, but are both based on the same idea. Pitch shifters shift the whole pitch of your guitar up or down by a set amount (often an octave), giving you a higher or lower tone than would normally be possible. Jack white uses a Whammy pitch shifter in the solo for Seven Nation Army, which has a foot pedal that rocks back and forth (similar to a wah pedal) allowing you to go up and down a full octave or more smoothly and quickly.

Rickenbacker basses have a distinctive tone. The 4001 bass has neck-through construction for more solid sustain due to more rigidity. The sustain at the bottom end is particularly striking, and by routing the two outputs from the stereo “Rick-O-Sound” output, the brighter bridge pick up through a guitar rig and the bassier neck pickup through a bass setup, a particularly distinctive bass sound is produced. The 3000 series made from the mid-1970s to mid-1980s were cheaper instruments with bolt-on 21 fret necks. There was also a set neck4000 version in 1975 and 76 (neck set like a Gibson Les Paul) which had a 20-fret neck, dot inlays, no binding (similar to the 4001S) but only a single bridge position mono pickup. (more info needed)
"We strive to offer our clients the highest level of service in guitar sales, repair and consulting. We will, as keys to attaining this objective, conduct our business according to a high standard of excellence. We are dedicated to earning our clients' trust through our professional conduct, our many years of experience, and our extensive preparation for their needs."
Mic placement is pretty crucial. You can get a million different EQ responses depending on where you throw the mic in front of the cab. I personally have the best luck - or at least I think so - when I back the mic off a little bit. I know a lot of engineers throw it right on the grille to get the bass boost, the proximity effect and all that garbage, but I find that if I back it up about six inches, I get a more balanced EQ curve.
Given the small amplifier that comes with the Rise by Sawtooth, one would have thought it wouldn’t offer much, but it turns out to be just everything you ever wanted in a beginner or intermediate electric guitar, even as it is capable of giving that adequate sound and melody when connected to the guitar using the connecting cable that comes with it.
The long chord progression can be very intimidating, especially if you’re a beginning musician. Technically, you’re only dealing with four different chords, which are, A – G – D – A – F – G – A. Looking at it, it looks really scary, but if you listen to the chord changes on a piano or someone else playing a cover of the song, it seems less intimidating.
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Engelmann Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Shape Shifter - String Instrument Finish: High Gloss Natural
The CX-12 is a 12-hole, 48-reed chromatic, uniquely designed with a one-piece plastic housing and a more ergonomic slide button. It is available in several keys including a tenor-C. The standard model is charcoal black in color, but a gold colored one is available in the key of C only.[42] A variant of the CX-12, the CX-12 Jazz, has slightly different outer body features for better ergonomics, a red and gold colored housing, and higher reed offsets which aid in better tone for jazz harmonica players.[43]
If you're looking for a one-stop music shop with an amazing selection of guitars, drums, keyboards, recording, live sound, DJ equipment and more, Guitar Center Twin Cities is it. Whether you're a beginner or a gigging pro, our team members have the expertise and musical talent to get on your level and help you make great choices. Located adjacent to the Rosedale Shopping Center by the Best Buy in Roseville.First and foremost at Guitar Center Kansas City, we strive to give you the experience that Guitar Center is known for nationwide: big-store selection and prices with small-shop expertise and personality. From sales and repairs to lessons and rentals, our staff in every department is well-trained to cater to Midwest music-lovers. Our store and lessons studio are open every day of the week, so there's always a right time to visit even if you're on a busy schedule.

You can run up to six of the 112 built-in internal effects within the Boss MS-3 Multi Effects Switcher at the same time and integrate three of your existing stompboxes into that sound too. So, to say there’s a world of options at your feet is an understatement. You can use it with your hybrid MIDI gear and utilise it to channel switch between amps too.
We would recommend that you, for your first guitar, spend between $500-$1000. This price range is good, because you know that you will be getting a guitar that is made for some serious music making (which the cheapest ones out there just aren’t). Of course you don’t want to spend this much money on something you’re not even sure you will be using a year from now, so if you aren’t that serious about learning to play the guitar it might be a good idea to go for an even cheaper option.
Amplifiers for electric guitars are more likely than bass amps to have multiple "channels", but some bass amps also have channels. By providing two or more "channels", each with its own gain, equalization and volume knobs, a bassist can preset various settings (e.g., an accompaniment setting for playing a backing part and a solo bass setting for playing a bass solo). In a heavy metal band, a bassist may use a multi-channel amp to have one setting with an aggressive overdrive, while another channel has a "clean" sound for ballads.
Higher-cost amps for professionals with an XLR DI out jack may also have a "ground lift" switch (to be used in case of a humming ground loop), a DI out level control knob, and a switch which determines whether the DI out signal to the PA or recording mixing board is pre- or post- the amp's internal preamplifier and equalization circuitry. The pre-/post- switch enables a bassist to decide whether to send the audio engineer just the signal from her bass, or to send the signal once it has been pre-amped and equalized by her amp settings. Some higher-cost amps may have a parametric equalizer (or a semi-parametric equalizer) for some frequency ranges (typically the middle frequency range), which can be used to modify the bass tone to suit different styles or performance venues. Some bass amps have a 15 or 20 dB pad which can be used to attenuate "hot" signals, such as basses with an internal preamplifier (depending on the model of amplifier, some brands may provide two inputs (high and low gain) instead of providing a "pad". This pad can be turned on using a button. Some bass amps have an even stronger pad, a 40 dB pad.
{"product":{"id":"J40301","stock":"","price":"149.00","name":"Les Paul Special Vintage Edition Electric Guitar","download":false,"sku_id":"","checksum":"93895071200","rep_id":"site51500000000013137","displayId":"1500000000013137","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}

The 85/15 “S” humbuckers here—again, they’re affordable versions of the Custom’s 85/15—are transparent, ‘hi-fi,’ articulate and high-output. Lush while clean and thick when clipped, the pickups have also been coil-split to take you into glassier, single-coil territory. However, you can’t coil-split them individually to form HS or SH combinations, for instance.
This affordable signature model for Iron Maiden guitarist Adrian Smith is an exemplary classic metal guitar for the money. It features a Jackson slim D profile neck with immaculately finished frets, while the oiled maple neck a joy to motor around on. Allied to the surprisingly good build quality, this imparts a premium feel to the SDX. Tonally, the body might not quite enjoy the snap and sparkle of Smith's alder-bodied American original, but basswood is a great tonewood anyway, particularly once you're piling on the gain. The bridge humbucker is plenty powerful, with just enough detail to prevent it sliding into the woolly morass suffered by many lower-end units, and the single coils give you more than a sniff of Strat flavour, making the SDX a versatile guitar indeed considering its heavy metal association. The Floyd Rose Special bridge also does a solid job of keeping you in tune, no matter how crazy you get. A versatile guitar capable of covering many bases, and perfect for nailing your favourite Maiden tunes? What more could you need, bar the white high tops and tight strides?
I have a Kona Signature Acoustic with beautiful inlays in the wood. I believe the body is mahogany, decent resonant tone, and once I shimmed up the saddle bridge (which technically should have been replaced all together due to notching), sounds better than my Martin in many ways, where it better distributes the low, high, and mid-range tones. The Martin is too bassy sounding, but have ordered new bone bridge saddle, which hope it improves the cheap plastic one it came with...

Once everything is assembled, check through the instructions one last time for any additional notes on connections, power etc (don’t waste all your hard work by blowing up the board with the wrong power supply). Then plug in your pedal and give it a try. There’s a good chance it will work first time. If not, go through the instructions again step by step and look to see where the problem might be. Missed, incorrect, or reversed components are the most common causes and can be diagnosed just by checking each step carefully.

These are great choices, but if you want a great guitar for the price go used and get either esp ltd ec400vf or the ec401vf. They come w seymour duncan 59 neck and jb bridge or dimarzio pickups. Grover tuners jumbo frets set neck mahogany neck and body. You can find em used for $300-400 and need absolutely nothing but to be plugged in. The ec256 is a great option but for the same price get the 401 used. I have a 65 jaguar a newer mustang 2 epi's 1 paul 1 SG and when I picked up the ec401vf for $300 it was the best value to quality ratio I have ever had in a guitar. You won't be disappointed. The ec400 series were also made in s korea and the earlier 401s were made there also. The newer ones are made in China and Indonesia but the quality is still incredible. I got a s korea model ec401vf w seymour setup. It smokes my epi l.p. tradional pro and was $250 cheaper. By far best deal it there.
OM-28: Similar to the 000-28 model in body size and ornamentation, but uses a 25.4″ scale, 1-2/4″ nut spacing, and 2-3/8″ string spacing at the bridge. Also known as the “orchestra” model, so named because of its association with banjo players transitioning to guitar in the late 1920s and early 1930s. The 14-fret neck-to-body design was designed to allow greater upper fret access, and thus feel more comfortable to banjo players accustomed to full acces the length of a 24-fret + neck.
it's really hard to beat the ric sound. the 335 12's and fender 12's are cool, but really the ric has the sound we're all familiar with. that being said, everyone has different tastes and I encourage you to play as many different ones as possible. Jimmy Page used a Fender 12 on Stairway. I went rick for that early beatles sound. the neck is tiny but it's part of the instrument.
Squier Affinity Stratocaster has all the same features of the Fender Stratocaster guitar at a highly affordable price. It has a maple neck and an alder body which gives it a snappy Strat tone. It also has three single-coil pickups that can be manipulated by a 5-way switch. A vintage style tremolo system makes it a great choice for those who like that system.

Patti Smith famously described Tom Verlaine's guitar sound as "a thousand bluebirds screaming." Television's leader soaked up the flavor of favorite records by John Coltrane, the Stones and the Dead – then synthesized them into something entirely new on the band's 1977 debut, Marquee Moon, spinning out endless fluid solos in concert with fellow guitar aesthete Richard Lloyd. Verlaine has kept a low profile in recent decades, but he remains a model for generations of guitarists with a taste for both punk violence and melodic flight.
Phasers, also called phase shifters, duplicate the original waveform of a guitar’s output, and shift one wave out of phase with the other. They blend both waves together usually applying an oscillating circuit, resulting in the waves moving in and out of phase with each other creating spacey, “whooshing” effects. “Itchycoo Park” by the Small Faces was an early example of phase shifting in a recording. Eddie Van Halen and Queen’s Brian May often used phase effects in the 1970s and ‘80s.
In terms of sounds, jazz requires a balance of warmth and clarity. While many solid body guitars can do an approximation of a jazz sound using a clean tone played through the neck pickup, in reality a dedicated jazz guitar will offer this particular sound without becoming overly woolly when lines are played at any speed. Let’s take a look at our pick of the 5 best jazz guitars.

I think that there is a lot more that goes into getting a rich sound than just the pickup layout. AYK different pickups also have very different sounds, so if you line up an HH next to an HSH, there are going to be so many different factors that it's impossible to just point to the pickup configuration as the difference, unless they are the same make and model. From my personal experience of wanting a nice HSH many years ago, it's not worthwhile to limit yourself to that configuration because there are so few models. IMHO. Also, I don't think you mention what style of music you play at all. – JFA Jun 25 '14 at 1:59

Fender has shown the spec sheets of its popular Mexican-built Deluxe Series Roadhouse Stratocaster model some love to create a reboot that comes seriously well appointed. The upgraded model features an alder body and bolt-on maple neck, with the option of maple and rosewood fingerboard, finished with satin polyurethane. Keep sniffing around and you'll find other features like the 'Modern C' neck profile, 22 narrow/tall frets, a contoured neck heel, synthetic bone top nut and a set of locking tuners with vintage-look buttons. While the previous editions of the Roadhouse and came with a 241mm (9.5-inch) fingerboard radius, the new model packs a flatter 305mm (12-inch) camber. Yes, the same radius as a Gibson Les Paul, making for easier string bends and lower action. The new Roadhouse features three Vintage Noiseless (1st generation) single coil-sized humbuckers wired to a five-way pickup selector blade switch, and master volume and tone controls. Lurking between the volume and tone knobs is the V6 preamp control, a six-position rotary switch that gives you access to a series of tweaked single-coil tones. Plugging in the Roadhouse reveals a slew of classic Strat tones. The pickups exploit the natural tone and woodiness of the guitar, while the Noiseless aspect lives up to their vow of silence, making them indispensable in a recording situation. As a result, bar metal, this is the best Fender electric guitar for just about all scenarios.
Note from the Editors: While exploring the “Psychology of Tone” last month, we learned that digging into the mushiest part of any signal chain (the listener’s noodle) leads to a better understanding of the tonal journey involved. The journey itself may be more important than you realize. We continue this series dedicated to messing with your head with a look at the science involved with the creation of those tones. Everything can be explained with science, right?
If you really want your guitar strings to stand out as well as your playing does, then these colourful options from DR are a novel eye-catcher. For even more fun, stick them under a UV light and they’ll glow, too! They might also serve a practical purpose for beginners, too, as new guitarists can quickly identify specific strings based on their colour.

Play It Loud: An Epic History of the Style, Sound, & Revolution of the Electric Guitar is just that: a swooping, all-encompassing timeline of the instrument’s early days to its beyond-essential role in pop culture and music. Written by Brad Tolinski and Alan Di Perna, with a foreword by Carlos Santana, the book dives into the electric guitar’s place in our society, tracing its evolution in sound, style, look and purpose. Here are 10 things we learned from reading:
New, used, nylon or steel string — or electric — for your first guitar take your time, choose carefully and never be afraid to ask for advice. Best of all, search for a good music shop near you and actually pick up the guitar, pluck the strings, listen to the sound. The people behind the counter want to help you, so that you come back for another guitar — and another, not to mention strings, string cleaner, capos… Don’t forget, this isn’t just buying any old guitar. This is the beginning of your dream coming true.
Again, as with the bridge saddle, too low of a bridge will decrease the "drive" of the strings. Thus the sound and tone will suffer. Also a low bridge is structurally not a good idea, as the bridge can more easily crack (and damage the top of the guitar). Most original Martin guitar bridges are about 3/8" tall (from bottom to the highest part of the bridge).
Barney Kessel was known for playing his Gibson hollow body jazz guitar and used it almost exclusively on his own recordings. But when it came to rock, pop, r&b and blues recording sessions with the most popular performers of the early '60s such as Elvis Presley, Sam Cooke, Connie Francis, T-Bone Walker, Ike & Tina Turner, Phil Spector, Dinah Washington and Bobby Darin, Kessel turned to his Kay Barney Kessel Artist guitar.
Hum cancelling: hum cancellation is caused by reverse polarity, reverse winding keeps a revrse polarity pickup in phase with a non reverse polarity pickup. To reverse the direction of the winding, simply swap wires, using hot as the ground and ground as the hot. Polarity can be changed on many pickups. If the pickup has bar magnets, simply flip them over. If the pickup uses alnico polepiece AND has the new plastic bobbins such as is common on Fenders, the polepieces can be pushed out with a screwdriver and reinserted "upside down". If the bobbin is fiber DO NOT attempt to flip the polepieces; the wire is wrapped directly around the polepieces and will almost certainly be damaged.
Though pitch-shifting is an effect, it is easier to control when used via an insert point. However, if you need to use the effect on several tracks in varying amounts, you can use it via a send/return loop, providing the shifter is set to 100 percent wet. That way, you can adjust the effects depth for individual mix channels by using the send control feeding the pitch-shifter.
Not everyone has the luxury of drum booths and separate rooms, but isolation boxes are great for isolating guitars during a rhythm track recording. They are also ideal for home recording, allowing a good  volume level without disturbing neighbours. Isolation boxes are commercially available, but can be expensive; try making your own from wood and foam.
While the other digital amplifiers we tried (the Blackstone ID:Core Stereo 10 V2 and the Line 6 Spider Classic 15) offered a similarly wide range of good sounds, most of our panelists preferred the Champion 20 simply because it was easier to use. Lynn Shipley Sokolow preferred the simplicity of non-digital amps such as the Vox Pathfinder 10, but she said, “The Fender is the best of the digitals because it’s easy to understand the controls.”
It has always amused me that one of the great tempests in the teapot of guitardom has been the legendary “lawsuit” of the 1970s. You know, when Norlin (aka Gibson) sued Elger (aka Hoshino, aka Ibanez) in 1977 over trademark infringement based upon “copying” Gibson’s headstock design. There are tons of ironies in this story, but one of the most amusing aspects is that companies such as Gibson have been one of the most egregious copyists of its own guitars over the years. Witness the Korean-made Epiphone Firebird 500 seen here.
As the first blues guitarist to pick up an electric guitar and play single-string solos in the late Thirties, T-Bone Walker didn’t just lay down the foundation for electric blues and rock and roll—he also built the first three or four floors. John Lee Hooker credits T-Bone Walker with making the electric guitar popular, claiming that everybody tried to copy T-Bone’s sound.
Sure, your pickups pick up the sound, and your amp amplifies it, but even before they get to handle it, your precious tone has already been formed by the interaction of string and wood. Pluck a string, and you set into motion a transference of vibrational energy from the strings into the wood of the body and neck (via different coupling elements such as bridge saddles, nut, and frets). The spectrum of sounds kicked out by this acoustic interaction is the biggest determining factor at the heart of the sound that eventually reaches the listener’s ear, however you delay, spin, or distort it along the way. Let’s look at the characteristic voices of a few tone woods, and see how they contribute to our guitar’s sound.
@Danny – As an EQ is used to filter and tweak the tone of the signal passing through it, this can be placed anywhere in the chain. For example, if you want to tweak the overall sound before the amplifier, place the EQ at the end of the signal chain. If you want to adjust the tone of your guitar before it hits your effects pedals, place the EQ at the front of your signal chain. It just depends on what you are planning on doing with the EQ and where in the signal chain it sounds best to you.
I have a problem visualizing a pickup wiring diagram that I am trying to set up. I just purchased a set of the new Fluence Strat pickups and I can’t figure out how to connect one of the wires coming from the bridge pickup (yellow wire – preamp input). I am using 3 mini toggle switches instead of the 5 way switch so I am having trouble transferring the different wiring scheme. Basically, the Preamp input and the preamp output from the bridge pickup connect to the 2 connections that normally have a jumper on the 5 way switch, so I can’t figure out how to change the wiring. I can upload the diagram if that would help. Thanks.

The three pickups were originally identical in their construction. With the rising popularity of using pickups in combination, Fender introduced a new feature in 1977 coinciding with the standard 5-position switch; a reverse-wound, reverse-polarity middle pickup. As the description implies, the magnetic polarity of this pickup is opposite the other two, as is the direction of the wire winding around the bobbin. This provides a hum-canceling effect (removing hum induced by poorly shielded, medium to high output AC devices) in positions 2 and 4 on the selector switch. This principle had been known for many years beforehand, being applied in the form of Gibson’s humbucking pickup and Fender’s own split-coil pickup used on the Precision Bass.
Rock On Good People (it’s actually rockongoodpeople) is another YouTube channel really designed to funnel viewers towards the creator’s website, www.nextlevelguitar.com which—no surprise—has heaps of stuff you can buy. But that doesn’t mean that Rock On Good People doesn’t provide a long list of free videos ranging from lessons for beginners through to how-to-play-techniques aimed at experienced players. What I like about Rock On Good People is the cool vibe you get from all the presenters, no matter the style or subject of the lesson, and some of the videos take you further down the guitar-playing track with themes like “Tips For Improving Your Live Shows”. That might seem a long way off, when you’re currently trying to get your head around playing basic barre chords, but these videos have hints and advice that are good seeds to plant in your mind early, even if you’re still some years off jumping off your first Marshall stack and into the mosh pit.
I recently bought my first tube amp, the Marshall DSL40C, which has amazing sound for the money, but the reverb that came on it is virtually non-existent. So I started looking at reverb pedals.....who in their right mind would pay over $100 for an effects pedal that does one thing like a (Fender reverb or Hall of Fame or Holy Grail)? Then I cam across the Zoom Chorus/Delay/Reverb and almost bought it for $119 but then this popped up. With the nearly 5 star average review, I thought I would spend the extra $80 and try it out. WOW am I glad I did. Not only do I now have a great sounding reverb, but I have every other effect you can ever imagine (phaser, tremolo, chorus, delay, overdrive, distortion, filters, etc....the list goes on and on and on.
Let me tell you about the vintage look at why it is favored among so many musicians and aestheticians around the world. Well, I won’t be able to tell you much about the vintage look in this short text, but what I can tell you is the fact that some of the best looking items out there, and best sounding, are entirely vintage. Well the Vox MINI3G2CL Battery Powered Modeling Amp is one of the vintage looking but entirely modern technology employing amps that produce a great sound while looking positively scrumptious. This small amp avoids the problem of weak low tones that so many other amp have by incorporating a bass boost technology into its construction. As a result we get a small, portable amp with a handsome look and an incredibly well rounded sound, with expressive lows and expressive high both present. And the price point relative to some of the other options on this list makes it a required purchase, unless something else catches your eye that is.

In addition to choosing between laminate and solid wood, you also have to consider the type of the tonewood. Of particular importance is the choice of top wood, because it greatly affects the resulting sound. Spruce is popularly used for the tops of acoustics because of its punchy and bright tone. Mahogany tops on the other hand is preferred for its warm tone, with more emphasis on the lower mid frequencies. There are other types of wood that fall between the two, each one bringing a subtly different flavor to the resulting sound.

Although Gibson guitars are expensive, they are the highest quality guitars out there. The guitar is made of high quality wood that makes your guitar create rich and smooth tunes. One of the most famous guitars created by Gibson is the Les Paul. The Les Paul is used by multiple celebrated musicians all over the world and it has been used many different times in musical history, meaning this guitar has survived for ages. Gibson is one of the most popular and praiseworthy guitar names on the market. Investing in a Gibson will be like carrying an award in your hands.

Later, on-board electronics allowed guitarists to move about the stage, rather than stay immediately in front of a microphone. On-board electronic tuning, availability, uniformity, and frugal costs facilitated performances by guitar ensembles like Robert Fripp‘s Guitar Craft students. Ovation has also produced solid-body electric guitars and active basses.

In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
As you will see, our list embraces outsiders, trailblazers, outliers, and Eugene Chadbourne playing a rake. We don’t worship “guitar gods,” but prefer our axe-wielders to be resourceful, egalitarian, flawed, and human. We’re not drawn to Olympic feats of fleet-fingered athletics, unless they’re used for unique and exploratory ends. We see the mewling histrionics of Jeff Beck as tyranny instead of catharsis. The name Derek Trucks is practically alien to us.

Based on Mesa's flagship Mark V, the Mark Five: 25 head is small, perfectly formed and typical of Mesa's superlative design and attention to detail. Two independent channels, each with three very different voice presets, combine with Mesa's iconic five-band graphic EQ for a choice of 12 sounds. You can footswitch between the channels, with the graphic on or off for quasi four-channel operation and preset 25 or 10 watts per channel. One of the best features lives on the back panel: a CabClone speaker-emulated direct output, with a speaker defeat for silent recording or practice, using the built-in headphone socket. Despite the Mark Five: 25's long feature list, it's very easy to use and its tones are sensational. The rhythm channel covers the shimmering clean tones of the modern Boogie and the fatter 'blackface'-inspired midrange of the fabled Mark I, while the Mark V crunch voice is so deep and three-dimensional you could record an entire album with it. The lead channel is equally inspiring, with a perfect rendition of the Mark IIC's overdrive tone (arguably the most coveted Boogie sound), along with more modern distortion effects that sound unbelievably good when tweaked with the graphic. The Mark Five: 25 is one of the best small Boogies we've ever heard, which means it's one of the best small amps there is.
In some small to mid-size venues, such as bars and nightclubs, the PA system may not have the capacity to provide the bass sound for the venue, and the PA system may be used mainly for vocals. Bass players in bands that play at a variety of venues, including these types of small to mid-size venues, may need to be able to provide the bass sound for the venue, and so they will require a large combo amp or bass stack with this capability.

The more contact the bridge has with the body, the better the sound will be transferred into the body. On the other hand, we have non-vibrato bridges which provide an anchoring point but have no control over pitch or tension of strings. Both bridges have their own pros and cons but non-vibrato bridges provide better tuning stability and solid contact between the body and the strings.

The herringbone purfling (binding) was discontinued on style 28 guitars in 1947. The binding was made in pre-World War II Germany and was not replaceable from American sources. When the stockpile ran out in early 1947, D-28s (and all style 28 guitars) were bound with a new decoration scheme of alternating black and white celluloid (originally used on the Martin archtop C-2 model). Hence the term "herribone D-28" or "bone 28" is heard amoung Martin collections, signifying a pre-1947 style 28 Martin guitar.
"Vintage" fretwire is most usually known as "medium" fretwire and that size in today's measurements is usually .080-.040"; what you would see commonly on a Fender RI or Martin acoustic.  I mention this as fretwire does vary and some "vintage" wire back in the day on the guitars was as narrow as .070".  It is commonly referred to in Dunlop numbers as 6230.

Even though recorded sound traces back to late 1877, the widespread access to this technology has only become available some 60 years later. As we go back in time, reaching 1940s, we run into the first ever instance of reverberation being used in music recording. It didn’t really take long for this trend to become popular, spreading throughout the world. However, back then there were no effects pedals or anything similar. Devices we have today were science fiction at best. Old school producers had to resort to various other means to achieve the reverb effect.

The Squier Vintage Modified Jaguar is a beauty on it’s own. Back in the days the jaguar was used for country music, early rock ‘n roll and jazz, but eventually it has found it’s way onto the stage of surf, funk, alternative, grunge and rock music. The guitar features include a basswood body, maple neck, circuit selector and tone circuit switches, pickup on/off switches, skirted black control knobs (lead circuit) and black disc knobs (rhythm circuit), vintage-style bridge and non-locking floating vibrato with tremolo arm, vintage-style chrome tuners and chrome hardware. A real good guitar for the price. If you want decent and different, this is it!

80/20 Bronze strings are a mixture of Bronze and Zinc.  They are also referred to as Bronze/Brass strings and are extremely common, much like Phosphor Bronze.  One of the main differences is this variety produces a very bright tone that enhances articulation and pick attack.   This effect can be lost very quickly depending on how much the player sweats and how often they clean their strings.  This choice can be a little more demanding on the wallet, due to having to change them more often.
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.

In terms of the electronics, Yamaha went with a System 66 piezoelectric platform. The preamp packs a standard three-band EQ couple with a built-in tuner and a flexible mid-range control. Needless to say, it gives you more than enough room to dial in a decent tone. Quality-wise, this might be the best acoustic electric you can get in this price range, period.
1. Blackstar ID:15 TVP ($229): This is one of the best combo amps on the market and with good reason: it comes with a variety of options to not only get you playing in no time. It also allows you to record very easily with a built-in USB option. You can select from six different power responses modeled after popular tube amp sounds (via Blackstar’s True Valve Power system) and even when turned down, the amp doesn’t lose its bite. The built-in multi-effects allow you to experiment with the world of effects and the Insider Software allows you to edit up to 128 user storable patches to further your sonic crafting.
I'm only 3 months into this journey to become a musician, so a beginner, but absolutely love everything about this guitar. I messed around in the early 90's on old electric while in college, but never learned chords or any songs. When my wife acquired her old Sears-quality kids guitar from her Mom, I put new strings for something to mess around with on the weekends. Several weeks later, I got a cheap First Act electric for $25. Several weeks later a nice Takamine acoustic as the ears "learned" the notes and chords better. While switching from this quality acoustic guitar to the First Act, it was clearly apparent the First Act was a piece of junk. Notes and chords were just not clear and just not enjoyable to play. Well, this Epiphone is an awesome step forward combined with the Marshall amp. While I want to progress to blues scales in time, I've purposely focused on the major and minor chords and seamless transition between them. This guitar expresses the notes of chords so clearly. What I love most is the ability to slightly modify major chords like from Dmaj to Dsus4 and have it translate so clear as an example. Prior I never used the effects on my Marshall because it just sounded like a mess, but this guitar solves that issue. After a whole weekend of use, it felt like a big leap forward just because of quality. The fretboard layout helped refine the chords I've learned so far, so all strings were clear. Really helped practicing bending, hammer-ons and pull offs too. At any rate, for the money, it's hard to beat. I suspect that if this journey continues a more expensive guitar may be warranted in a few years, but as others have said, this will always be a quality practice instrument. Especially considering we spend every other weekend at our beach bungalow and it is nice not having to transport every time.
Small-diaphragm condenser mics, on the other hand, tend to have flatter frequency plots and a better-behaved off-axis response, giving a sound sometimes described as more focused, but they seem to be less commonly chosen by the interviewees than large-diaphragm ones. Neumann's KM84 seems to be the most regular choice of small-diaphragm condenser, and numbers John Fry and Bill Price amongst its high-profile users, while Sennheiser's MKH40 warrants a particular mention from Mike Hedges: "I started using [these mics] when I was working with the Beautiful South. I started off with two and now have more than 20. I think they were originally designed for classical recording, because they have very high gain and very low noise. This means that you can get a very clean sound. They also accept massive amounts of volume, so you can put one against a guitar amp on full and it will take it." Hedge's concern about the ability of the microphone to handle the sheer volume of some guitar amps is echoed by several of the other producers, who make a point of mentioning that they switch in a condenser's 10dB pad when recording electric guitars.
With so many features, it can be tempting to just dismiss it as a low quality jack-of-all-trades unit, but even experts are convinced of its versatility and sound quality. Guitar World concludes: "Costing less than most single-effect stomp boxes, the G1Xon is an incredible bargain that provides versatile multi-effect processing power and impressive performance and practice capabilities."

All that being said the best guitar is the one that allows you to express yourself to the best of your ability and makes you feel good doing so. If you need a custom shop Les Paul to do it then by all means go for it. If a Godin or Ibanez or Dean or Jackson is the one for you who are we to tell anyone they are wrong. Personally I think the best guitarists on the planet play Telecasters! :-)
In our testing, the Fender Champion 20 was the only amp that offered a wide variety of amplifier sounds and special effects while also keeping them all easy to access. Beginners can get a great sound easily and experiment with different effects without having to invest in separate effects pedals. Experienced players can get most of the sounds they want with nothing more than a guitar, an amp, and a cable.
This is a very rounded sounding electro-acoustic bass. Recorded straight without a mic, so there is no noise. This fits nicely with most types of music. Its deep but not overpowering, leaving room for other instruments. There is a choice of sample sets to choose from in this soundfont. Direct or through my j-station (which makes it sound more like its through an amp), or a mix somewhere between the two. The j-station samples are the same direct samples routed out and through the j-station and back in again, which is why it is possible to have a mix of the two.

The guitar, however, appears to be in better shape than the guitar maker. While in the past decade, sales of the electric guitar have fallen from 1.5 million to 1 million, according to the National Association of Music Merchants (NAMM) a total of 2.6 million guitars, including both acoustic and electric guitars, were sold in the U.S. last year, 300,000 more than in 2009.

Playing an amp with an instrument you don’t own is like choosing a girlfriend by dating her mom. Bring your main guitar with you, even if you think the store stocks a similar model. An unfamiliar guitar may have a brighter sound than your personal ax, and an amp that sounded sparkly and lively in the store may actually be dull as Anne Heche on Quaaludes when you get it home.
{ "thumbImageID": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "defaultDisplayName": "Epiphone Les Paul Special I P90 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51314371183322", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry-1314371183322.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn Black", "sku": "sku:site51314371183302", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black-1314371183302.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51314371183312", "price": "149.00", "regularPrice": "149.00", "msrpPrice": "209.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow-1314371183312.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000-00-60x60.jpg", "imgAlt": "" } ] }
Get ready to rock with the First Act Electric Guitar with Amp. It's scaled down for smaller players, yet it's designed with the same materials, electronics and appointments as First Act's full-size guitars for full rock sound. One high-output humbucking pickup delivers big rock distortion and classic clean tones. The maple neck and rosewood fingerboard offer a solid feel and warm tone. Classic hard tail bridge pumps up the sustain. Independent volume control means the ultimate in sound tweaks.

The first “real” guitar I ever bought for myself as a teenager was an Ibanez RG much like this one, and I played that guitar for almost 10 years before buying yet another Ibanez RG. Note that this model does not have a tremolo, which means great tuning stability and fewer headaches when it comes to changing strings, tuning, and setup. However, you won’t be able to perform any crazy whammy tricks, so be sure you’re okay with that. Mahogany body, two hot humbuckers, jumbo frets, and an ultra-stable 3-piece maple neck. Hard to beat at this price point. Love it.
While guitar straps come in a variety of different materials, El Dorado only uses leather in theirs, so rest assured you're getting exceptional quality here. If you're going for a cool western persona, try starting your search with the top-rated Vintage Hand-Tooled Leather Guitar Strap, featuring classic basketweave embossing backed with genuine sheepskin shearling. This hand-engraved strap is finished with a solid nickel buckle and loops for a truly sophisticated look you'll be proud to showcase.

Had gibsons, fenders, etc. Was really impressed with my washburn idol. Only downside is that there aren't many dealers, so you've really got to make an effort to get one in your hands. Dollar for dollar, one of the best brands out there. Quality can be spotty if you look on ebay, so I'd recommend craigslist... Buy em used, since they don't hold value like the big brands.
In the ’80s, with the advent of new digital effects units, the “refrigerator racks” appeared on the scene—custom rigs built for the studio and touring pros of the day. Effects loops in guitar amps also became commonplace—allowing guitarists to insert line-level effects after the distortion generating preamp stages of their amps, and before the power amp stage—a big tonal improvement when using time-based effects like delay and reverb.
Pickups are transducers that convert the mechanical energy of a vibrating guitar string into electrical energy by way of electromagnetic induction. It is a fundamental concept studied in physics and electronics that a changing magnetic field will generate a current through a coil of wire. The electric guitar pickup uses permanent magnets and pole pieces to form a steady magnetic field in the vicinity of each individual guitar string. An opposite magnetic polarity is induced in the metallic (steel core) guitar string when mounted above its respective pole piece and when the string moves, the otherwise steady magnetic field changes accordingly. Wire is wrapped around the poles thousands of times to form a coil within the magnetic field to pick up an induced current and voltage.

1958-1969: replaces the "U" models and now has a double cutaway body with short horns. Masonite/poplar frame bodies, 13.25" wide. Models numbers include the "Standard": 3011 (black 1 pickup), 3012 (bronze 1 pickup), 3021 (black 2 pickup), 3022 (bronze 2 pickup), 5025 (blond 2 pickup). The 3021 is considered THE Jimmy Page model. "Seal" shaped pickguard and concentric knobs on 2 or 3 pickup models. Round control knobs.
These are world class guitars and have got probably the best feel any guitar can give apart from that u can play everything on these guitars from classic rock to jazz and blues followed by metal. the main thing that these guitars are known for is their finish and there unique necks which are really fast and not too thin which keeps your tone and feel in place. I would say that these guitars definitely deserve a place in the top 3 and definitely do watch out for the petrucci signature models
{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: first act","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"first act","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}
"It's a labor of love," says Youngman, a guitar master who's been handling guitars since the '50s and '60s when rock 'n' roll was still in its infancy. But he's not just a surgeon; he's a neck specialist. "If the neck doesn't feel right, you're not going to play." He's always been good at setting guitars up, and today he works mostly from home, although he also does repair work at Guitarasaur in Watuga. "It's always nice to make someone happy. It makes me feel like I'm doing something right."
In the midst of the controversy, conservative commentators alleged that the raid was a politically motivated act of retaliation by the Obama administration, as Juszkiewicz had frequently donated to Republican politicians, including Marsha Blackburn and Lamar Alexander. Chris Martin IV, the CEO of Gibson competitor C.F. Martin & Co., had donated over $35,000 to the Democratic National Committee and Democratic candidates in the same time period. Though Martin featured several guitars in its catalog made with the same Indian wood as Gibson, the company was not subjected to a raid.[55] Following revelations in the 2013 IRS targeting controversy, the right-leaning magazine FrontPage declared that "there is now little doubt the raid...was politically motivated," and that "the Gibson Guitar case can hardly be dismissed as regulatory overreach. In hindsight, it was an ominous foreshadowing of the explosion of misdeeds we are witnessing today.[56]
Whatever budget you’re on, you will always be able to find a suitable guitar. Even in the $100 price range you can find some models that play nicely. However, in that super-budget market there is a lot of garbage, so be careful. There’s a difference between ‘affordable’ and ‘cheap’, so do your research before buying something that may offer no value.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Neck-through - Neck Wood: Maple - Neck Construction: 5 Piece - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast, Nickel, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Blue
Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.
Schecter's Diamond Plus passive humbuckers are pretty hot for what is essentially an affordable set. Their range is wide and they handle distortion rather well. This is largely what makes this such a versatile option. Schecter went with a standard Tune-o-Matic bridge for this build, making it a simple but reliable configuration, especially for those more interested in playing than tinkering.

{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: harmony","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}

A boost pedal is one of the most useful pedals one can have. Simply put, it boosts the signal that goes into it. It can perk up a low output guitar, or bring out more character or a different quality to your amp. This is especially useful for solos where overdrive or distortion would overwhelm the tone you've got. Boost adds more “you” to the sound. Look out for what tone the boost adds, like treble or mids before purchasing. Some boosts claim to be transparent, maintaining the same EQ of your original tone, while others spike a certain part of your EQ intentionally.
The EG-6N had a similar profile but tuners were mounted on a square-topped head with the buttons facing up. This had a dark square-ended fingerboard with dots and a single chrome-covered pickup with black center insert and exposed poles (same as on the SD-2L/4L), volume and tone control. The EG-8N was similar except for having a light fingerboard with black dots, and two of the chrome/black insert pickups, volume, tone and threeway select. A folding stand to hold the steels was available (this was a standard Teisco product from the mid-’50s on).
STEM educators take part in a five-day institute focused on how to manufacture guitar parts for their classroom or for the nationwide network of schools that are implementing the project. Modularized curriculum with assessments will cover the content provided as part of the institute. The primary focus of the institute will be the application of CNC technology as it relates to manufacturing guitar components. The participants leave this institute with the modularized curriculum and a custom guitar body they have designed and fabricated. The additional parts necessary to complete the guitar are also provided.
In the 1980s, digital rackmount units began replacing stompboxes as the effects format of choice. Often musicians would record "dry", unaltered tracks in the studio and effects would be added in post-production. The success of Nirvana's 1991 album Nevermind helped to re-ignite interest in stompboxes. Some grunge guitarists would chain several fuzz pedals together and plug them into a tube amplifier.[47] Throughout the 1990s, musicians committed to a "lo-fi" aesthetic such as J Mascis of Dinosaur Jr., Stephen Malkmus of Pavement and Robert Pollard of Guided by Voices continued to use analog effects pedals.[48]

Modulation is where we step away from the more subtle (relatively) effects which serve to colour an existing tone, and into areas where you can truly begin to add flavour and texture to your tone. There are a few main types of modulation; chorus, phase, tremolo, wah and flange. Chorus subtly mimics your tone with a microscopically detuned duplicate, which when played together adds a nice warm layer to the sound. As an example, play the ‘e’ note on your second string (fifth fret) and the open ‘e’ first string at the same time. Naturally, there is a cent or two difference in the tuning. But you can see that two virtually (but not exactly) instances of the same note makes everything sound a bit bigger and a bit wider. That, in an admittedly basic form, is the chorus effect.

For most players, the ideal location to place modulation effects—which include phase shifters, flangers, chorus, rotary, tremolo, vibrato and so on—is directly after a compressor and/or overdrive/distortion pedal. When these effects are distorted after the fact, the sound tends to smear and lose definition (particularly with chorus), although there are a few exceptions where distorting a flanger or phase shifter can sound really cool. The best example is Eddie Van Halen, who doesn’t use distortion pedals and instead generates all of his distortion from the amp. When a flanger or phase shifter is placed in front of a distorted amp or overdrive pedal, it can create dramatic thick, jet-like phasing and flanging effects (See Example 2, below).
The acoustic guitar lends itself to a variety of tasks and roles. Its portability and ease of use make it the ideal songwriter's tool. Its gentle harp-like arpeggios and rhythmic chordal strumming has always found favor in an ensemble. The acoustic guitar has a personal and intimate quality that is suited to small halls, churches and private spaces. For larger venues some form of amplification is required. An acoustic guitar can be amplified by placing a microphone in front of the sound hole or by installing a pickup. There are many entry-level acoustic guitar models that are manufactured to a high standard and these are entirely suitable as a first guitar for a beginner.
Let me shoot you some names Mr Pro Guitar player. When those you mention can play with the likes of Jack Pearson you can put them on a list. You didn’t even touch on country or bluegrass so I have to assume you know nothing about them. So let me throw this out there. There is only ONE called Mr. Guitar. Chet Atkins. His protege, Jerry Reed is another great. Let’s try Merle Travis, Jody Maphis and in recent years Redd Volkaert. I think you need to expand your listening radius. Let’s not forget the man who likely has his name on your guitar, Mr. Les Paul. Then I would ask you listen to bluegrass flatpicking. You want speed? These guys can play with Ygnwgie and do it on a Martin D28.
You wont be sorry with this harness, full size volume pot , push pull tone pot/switch both with good throw torque, great solder connects and a quality, all hardware was intact , just remove replace, I did have to carefully bend the lugs on the input switch to get it to seat properly in my Epiphone but other than that minor obstacle all went well, no hum or noise and the toggle feels solid, man Epiphone put some straight up junk electronics in my guitar so this was a great upgrade, thanks Kmise you got a new customer..will order another for my Jackson Kelly..
I'm seeking a guitar to elicit the rich fat heavy sound. So as I understand a guitar with the H humbucker (double coil) pickup is what I need for that. But there is a wide range of layouts for the guitars. Some of them have S single (single coil) pickup, for example H-S-H layout. Where single coil pickup is mostly used for blues, funk and jazz guitars. And these H-S-H guitars are also recommended for heavy rock (because of the humbuckers).
A soldering iron is basically a tool that allows you to transfer heat that in turn melts the solder which is used to join two pieces of metal. The heat is supplied electrically (this wasn’t always the case) and the soldering iron itself will have an insulated handle protecting you from the heat generated. For some useful tips on best practice for soldering click here: https://guitarkitworld.com/common-mistakes-to-avoid-when-building-an-electric-guitar-kit/
One very interesting and strikingly modern Teisco guitar, the YG-6, appeared in Japan in 1965. It was very near the classic Strat shape, with offset double cutaways and Strat-like contours, but the horns were more pointed. The neck had the new hooked headstock and the rectangular edge inlays. A large multi-laminated pickguard stretched from the upper horn down to the lower bout control extension. Three large rectangular single-coil pickups, with chrome sides and black center insert (exposed poles) sat in front of a roller bridge and the clever platform vibrato design. Three on/off rocker switches sat above the strings, plus a small sliding switch, presumably a mute. It had one volume and one tone control, and is an exceptionally handsome guitar.

An amplifier stack consists of an amplifier head atop a speaker cabinet—a head on top of one cabinet is commonly called a half stack, a head atop two cabinets a full stack. The cabinet that the head sits on often has an angled top in front, while the lower cabinet of a full stack has a straight front. The first version of the Marshall stack was an amp head on an 8×12 cabinet, meaning a single speaker cabinet containing eight 12" guitar speakers. After six of these cabinets were made, the cabinet arrangement was changed to an amp head on two 4×12 (four 12" speakers) cabinets to make the cabinets more transportable. Some touring metal and rock bands have used a large array of guitar speaker cabinets for their impressive appearance. Some of these arrangements include only the fronts of speaker cabinets mounted on a large frame.[25]
Many of the Cordobas, such as the C7, come with a gig bag or case, which makes it easier to keep your guitar in great condition, especially if you purchase a humidifier block. If you head over to the Amazon listing for this guitar, you might see that the reviews are the same for this guitar as they are for another Cordoba instrument, so there really isn’t much extra information, unfortunately.​
Martin’s B series basses were big flat-tops with 34″-scale mahogany necks. Designed by Dick Boak, these ABGs used the same bodies as Martin’s Jumbo guitars; measuring 16″ wide with a depth of 4 7/8″, they were large enough to produce decent acoustic volume without being ungainly like other maker’s attempts. The top was solid spruce, the fingerboard was ebony, and the body was either solid East Indian Rosewood (B40) or solid flamed maple (B-65). A Fishman bridge-pickup system was available adding an “E” in the model number. Both basses were also available with fretless fingerboards.
Here I'm going to look at all of the different kinds of pedal available on the market. Hopefully this will help act as an effects pedal guide to beginners who are looking to buy their first pedal, and just don't know where to start. We'll look at the name of the effect, what it does, and an example of the pedal (mostly Boss and MXR pedals as they're probably the best known). Oh, and I won't be looking at any of the niche boutique pedals; that would take ages!
I just want to say I completely agree with the assesment of getting a non-shit Fender strat vs a Squire to begin with. I was on one of these cheapos and a 15w marshall amp for way too long. I became decent at playing, but in the end I didn’t feel inspired to keep playing. I recently bought a Maton MS503 Classic and a Fender Blues Deville 410 and playing that setup was like my body was on fucking fire. I wish I’d had more of that feeling sooner in my life. Those $200 for a squire goes a couple of years, but a $600 strat or other great guitar can go a lifetime. Amp matters heaps too of course.
Adolph Rickenbacher was born in Switzerland in 1886 and emigrated to the United States with relatives after the death of his parents. Sometime after moving to Los Angeles in 1918, he changed his surname to “Rickenbacker”. This was done probably in order to avoid German connotations in light of the recently concluded First World War as well as to capitalize on Adolph’s distant relation to World War I flying ace Eddie Rickenbacker. In 1925, Adolph Rickenbacker and two partners formed the Rickenbacker Manufacturing Company and incorporated it in 1927. By the time he met George Beauchamp and began manufacturing metal bodies for the “Nationals” being produced by the National String Instruments Corporation, Rickenbacker was a highly skilled production engineer and machinist. Adolph soon became a shareholder in National and, with the assistance of his Rickenbacker Manufacturing Company, National was able to boost production to as many as fifty guitars a day.[4]
Wes Borland (b. 1975) guitarist for Limp Bizkit has owned many Ibanez guitars, including a custom 4-string baritone guitar, although he no longer endorses them. He was mainly noted for playing an Ibanez RG7 CST which had selectable piezo and magnetic pickups, only 18 of these were made in 1999. Borland has a signature Yamaha guitar, but has been seen playing a Jackson with the reformed Limp Bizkit.
Same woods sounding different? OF COURSE!!! Look, I’ve been a carpenter for over 30 years and can absolutely inform you that there is a marked variation of characteristics of wood in the same species…density, tap tone, characteristics of how the individual piece reacts to being worked with tools…heck for all anybody knows internal stresses (for example as indicated by how a 12″ wide piece of wood reacts to being ripped down the center…many times both pieces end up being bowed and such) might play a big factor in how said piece of wood sounds musically…shrugs shoulders…
Around ’77 or so (since the new shape was similar to the Magnum basses), with sales embarrassingly bad, Ovation took some Deacon bodies and added new contours, carving a dip into the top curve and adding angles. It didn’t help. The Breadwinner was officially axed in ’79, with the Breadwinner loosing its head in ’80, although the market had long passed them by.
The roots of effects pedal usage can be traced back to early into the history of the electric guitar, but two people immediately come to mind who really pushed its usage out there:  Roger Mayer and Jimi Hendrix.  We’ve come a long way since those early days and it’s easy to be overwhelmed by the insane amount of options out there.  From good old standbys to newer boutique options, it can be a chore to know what effects pedals could be right for you.
Founded in 1976, Schecter Guitar Research started out by producing replacement parts for existing guitars of the era. They then took the production a step further by custom building guitars, and have grown steadily ever since. Today, Schecter is known for their extensive line of mass produced electric guitars, and their instruments are well received in the rock, punk and metal circles.
The Les Paul Custom then became known as the “tuxedo” Les Paul with its Ebony and Alpine White color finishes, accentuated with shiny gold hardware. The Custom PRO features a classic gold LockTone Tune-O-Matic bridge and a gold stopbar tailpiece. You’ll find more gold in the headstock with the gold Grover tuners. It also features a fully bound body, headstock and neck, as well as pearloid fretboard inlays.

Then, there are the venues where all you get is a vocal mic or two, where you're left to curate your sound all by yourselves. This category accounts for the vast majority of places a young band will play, and if you can hone your tone here you can hone it anywhere. What's most important is that you keep your amps low enough to allow the drummer to play at about 80% intensity. That way, the audience can actually hear all those important vocals, and when your drummer kicks it up to 100%, and you stomp on your distortion pedal, the audience will actually feel a shift.

I recommend you buy your pickup new, and from a place that you trust. I am getting more and more unsatisfied with Musician's Friend(everything I order is backordered...) so after being informed that my pickup was going to be in stock three weeks from when I wanted it, I canceled the order, bought the same pickup at Guitar Center(online) and it came in by the end of the week.
As suggested by the numerical designation, Martin’s 28 Series was essentially an upgrade or refinement of the earlier 18 Series. Martin typically indicates fancier materials and appointments with a higher number (a D-28 is fancier dreadnought than a D-18, etc.). These consisted of one guitar, the E-28, and one bass, the EB-28. The first prototypes appeared in June of 1980; production began in January of 1981.

Uh, Roland. I don’t know when was the last time I read about the best amplifiers and one of Roland’s models was not there. That’s not due to their ability to market their instruments to everyone (well, they are good at that too, probably) BUT the main reason why they are always a talk of the town (of a very musical and amplifier obsessed town) is their quality of production. With a lot of expensive amps, they are also graceful enough to give us the MERE MORTALS ability to bath in the glory of what is Roland tone. This CUBE‌-10GX amp is a 10-watt little combo amp with one 8 inch speaker that is ideal for home practice or anyone who needs an inexpensive model that will not ruin their performance. With built-in effects, heavy-duty cabinet design, and a compact construction the CUBE‌-10GX amp might be your best choice for a practice amp that also works as a traveling amp.

Players and rock historians alike will talk endlessly about who either created or discovered or recorded the first distorted guitar tone. They argue, pontificate, debate, and even break it down into categories of type and of geographical location. “So, do we mean distortion, overdrive, or fuzz tone?” or “Do you distinguish between North American and European ‘firsts’?” Dave Davies of the Kinks is often credited with the first appearance of a heavily distorted electric guitar sound in the British charts for ‘You Really Got Me’ in August 1964.
The gray area between different types of phasers and chorus pedals—and phaser-style chorus pedals versus delay-based chorus pedals—arises probably because designers and manufacturers really have followed two distinct paths in this field. Some phasers have sought to approximate the Uni-Vibe’s approximation of a Leslie cab, and some so-called choruses have done much the same. Other phasers have been designed from the ground up more purely from the perspective of the principles of phase shifting in itself, rather than in an effort to sound like a whirling speaker or any other electromechanical device that has come before. The result means the field is broad and varied, and different phasers (or their related effects) can often have different voices with characteristics more distinct than, say, two delays from different makers.
Don't just slap an effect on a track: why not try using automation to apply effects (in this case delay) on single words or phrases to make them stand out? Modern audio sequencers make it very easy to play around with spot effects — that is, effects which are applied to single notes or phrases within a track, rather than to a pattern or track as a whole. Try using different reverb styles on the snare within drum patterns: a short decay on the '2' and a long decay on the '4' for example. Another idea is to apply spot chorus to individual words within a vocal line, as a way of adding emphasis to the lyrics. The 'freeze' or audio bounce-down function of a typical sequencer allows you to get around any problems your computer might have in running lots of instances of a particular effect. Stephen Bennett
I got this one because my 18-year-old Takamine G-series has some serious fret wear, and a slightly warped neck, even with the truss rod maxed out, and will cost more to repair/refurbish than this one cost outright. Hence, the action is quite high, and it's hard to play bar chords higher than the 3rd fret, and there's some noticeable buzz and rattle unless I hold my mouth just right...
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.
We use technologies, such as cookies, to customize content and advertising, to provide social media features and to analyze traffic to the site. We also share information about your use of our site with our trusted social media, advertising, and analytics partners. You indicate your consent to this use by clicking “I Agree” or by continuing to use this website. View details.
Rule 4 - The technology further defines the order. Let's give a couple examples here. If you don't use your noise gate before your compressor, you'll increase the volume of your noise which renders your noise gate useless. If you send an impure signal like heavy distortion to a harmonizer, the harmonizer will be very inaccurate, thus you want to apply distortion to the harmonized signal and not the other way around. If you compress before using equalization, the compressor may act on frequencies you don't intend to keep in the signal, thus you should EQ first.
At one point or another in your musical life someone is going to as you what the best guitar brand is.  By now you’ve probably figured out that there’s no single “best guitar brand.” The verdict would likely go along the lines of what is the best guitar brand for you or your needs as a guitarist. There are some good suggestions that can be made with the above information along with some personal insight. Things like:
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
I doubt I can bring anything relevant to this discussion that hasn't been said already but since I liked the article so much and the subject has puzzled me since I got my first guitar, I jsut have to pitch in. My first guitar was a cheap Jackson-esque strat the brand was Cyclone. It was significantly lighter in weight than my friends Fender stratocaster and I liked it for that reason from the beginning. It was just much easier and more comfortable to play, esepecially while standing. Maybe because of this I've been biased to doubt the whole tonewood thing. My experience is that most 'guitar people' (at least here in Finland) seem to think that lighter wood is simply a sign of a bad quality electric guitar. I talked about this quite recently with a local luthier, who is very sience oriented and uses rosewood as the body. Guitars he makes are so light that when you pick them up at first, it is hard to believe they aren't hollow. So I asked him about his thoughts on the density and / or other qualities of the wood affecting the tone and his responce was pretty much consistent with the article. Anyhow he did mention the _theoretial_ possibility of the waves to traveling to the wood and reflecting back to the strings _possibly_ affecting the sustain. As someone stated, in real life physics there are never completely isolated phenomena but you can draw a line whether a factor is significant or not. John's comment above would support the more dense wood to be better but my guess is that when it comes to the sound that is audible to human ear, the material does not count. How a guitar feels is a totally different matter and shapes the way the player hears the sound drastically. My intuition says that lighter wood might convey the vibration to the players body which would partly exlpain Butch's experience with guitars with different materials. I've never thought about that before but do find anything else than the strings resonating (springs, screws..) uncomfprtable.
The final stage of our ME-80 signal chain is delay and reverb. These ambience effects create the illusion of playing in a different space. It makes the most sense to have them at the end of your effects chain. If you think about it in real life terms, a sound is fully formed it goes out into any space. As a side note, delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
Certain aspects of this thicker sound can only be achieved by using a bigger gauge of string.  Pat Martino, Stevie Ray Vaughan, and other guitar masters are a testament to this philosophy.  A bigger string will offer a bigger sound, if we are willing to make sacrifices in other areas.  Again, these sacrifices may be negligible depending on your genre.
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.

After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.

The key to getting a great guitar sound really is in the hands of the engineer, not his equipment. I've gotten great sounds in multi-million dollar rooms, and topped them in the smallest of home studios. You can do it too. The key is to constantly experiment and apply some basic physics. Try different mics, try moving them closer and farther, try different angles, try putting the amp in a corner, try putting the amp on a concrete floor, try it on a wood floor, try it on a floor with green shag carpeting, just try anything!
Three recording sessions between 1936 and 1937 produced 29 songs, including the verifiable classics “(I Believe I’ll) Dust My Broom,” “Sweet Home Chicago,’” “Walkin’ Blues,” “Love in Vain” and “Crossroad Blues.” His popularization of cut boogie patterns presaged electric Chicago blues and rock and roll, while his fretted and slide guitar licks are so timeless that they still show up in contemporary music.
While there are some obvious quality gaps, they do appear to be closing as time passes on. The hardware used on Epiphone is getting better, and the presence of the new ProBucker Pickups helps to elevate the brand to new heights. The fact of the matter is, while Epiphone is viewed as just being a cost friendly alternative to Gibson, guitar players gravitate to the brand anyways for its own special sound. While it may use the same Specs as a Gibson, they are far from equal guitars, including in the sound department (4).
The Effect: Vibrato effect, often mistaken for a tremolo, is the type of guitar effect that alters the pitch of your signal. The result is very similar to that which you get when you operate the tremolo bar on your guitar. There are different types of vibratos out there, but the most common division is between analog and digital units. Analog vibratos are known for their clarity and organic feel that comes from analog pitch shifting.
Once you have the height of the strings over the fretboard adjusted, you can fine tune the intonation setting with an electronic tuner. If the saddle locations are already close to where they should be (based on your measurements), your saddle height should not have to be changed very much as you make the final intonation adjustment. If this is a tremolo bridge and it is blocked, tension the tremolo spring claw to the correct setting( this adjustment will be the subject of a separate article).
Good results are usually achieved using a dynamic instrument microphone placed 6-8" from the speaker, off-center. If more low-end is needed, move the microphone closer in (2-5") for increased cardioid proximity effect. Use your ears or a set of headphones to find the "sweet spot" of the speaker. Consider miking the guitar itself with a small-diaphragm condenser in the area of the picking hand aimed toward the bridge, for extra string texture in the track.

| Tags: 1940's fidelity amplifier, 7F7, amp, amps, chickenhead knobs, EL86, fender clone, fender tweed champ, fidelity amp, fidelity amps, gibson skylark, gibson skylark amp, guitar amp, Guitar Amp History, guitar amps, practice amp, practice amps, silverface champ, silvertone, tone, tweed champ clone, valco, vintage amp, Vintage Amps, vintage guitar amp, vintage guitar amps
It does sound intimidating when you read platitudes like "There is no official rule on how to do it, and you should break the rules and experiment because that's what art is, and you'll invent something new." Some people even tell you to figure it out yourself, which is equally absurd. It developed over decades. No one person is going to just sort it out by themselves over night.
On 2007’s self-titled effort and the new Nightmare, Avenged Sevenfold have continued to expand their sonic template, leaving Vengeance and Gates plenty of space to explore a range of different styles. At the end of the day, however, metal is metal, and at its essence that means killer riffs and shredding solos, which the duo unleash in abundance. A7X staples like “Bat Country,” “Almost Easy” and the latest single, “Nightmare,” are chock full of blistering rhythms and finger-twisting, speed-of-light leads, while they tread that sweet spot between catchy melodicism and all-out aggression.
This guitar is one of the more affordable left-handed variants that you will find on the market. With a 41-inch body and a full-scale, you won’t find any limitations to the music you wish to play. The body is 3 inches thick which not only makes it comfortable to hold but also play. The cutaway gives you good access to higher frets while also increasing the appeal of the guitar.

Electri6ity is HUGE, like over 26 gigs, but it's like having Eddie Van Halen in your plugin bin once you figure out how to use it. The learning curve is steep, but there's no way I would ever be able to play guitar as well as I can program it not to mention afford the thousands of dollars worth of high-end guitars that are sampled. It also includes a very nice effects rack that is optimized for the library (although DI versions are included so you're free to run it through Amplitube or whatever you like).

If you are looking into a list of the best guitar practice amps chances are you plan on practicing… a lot. The chances are also high that you are a beginner and the idea of getting yourself into this unknown yet fascinating world is somewhat confusing. While figuring out which guitar you want is a big step forward the next step is not that much easier. You got to find a good amplifier. The market is full of all kinds of amplifiers. Starting from tube amps over $2000 for pre-level players and going down to amplifiers under $100. And yes, maybe $100 amps are not the highest in quality but they do the job, especially if you have done your research.
Selling my guitar rig i used here in RSA Not splitting up 1 x tech 21 sansamp psa1.1 preamp,studio standard 1 x crate Powerblock 150w mono or 2x 75w stereo amp 1 x 4x12 quad box,custom built with plywood not cheap chipboard, loaded with celestion G12s All as good as new Too heavy to ship overseas Can swop for something lighter i can carry on a plane
Lastly, Capacitors. Now this one is a vast subject matter to cover as there is so much debate about which is the 'best', which is the most 'vintage correct' etc. If you're a member of any guitar forum, I'm sure you've encountered many a thread about this too. There's an awful lot of cork sniffing about this subject, it's pretty bad! but I'm going to keep it as civilized as I can sticking to facts and my findings/experiences.
{ "thumbImageID": "RA-090-Dreadnought-Acoustic-Guitar-Natural/423794000010000", "defaultDisplayName": "Rogue RA-090 Dreadnought Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Sunburst", "sku": "sku:site51274115039704", "price": "69.99", "regularPrice": "69.99", "msrpPrice": "129.99", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Dreadnought-Acoustic-Guitar-Sunburst-1274115039704.gc", "skuImageId": "RA-090-Dreadnought-Acoustic-Guitar-Sunburst/423794000027000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RA-090-Dreadnought-Acoustic-Guitar-Sunburst/423794000027000-00-60x60.jpg", "imgAlt": "" } , { "name": "Natural", "sku": "sku:site51274115039668", "price": "49.99", "regularPrice": "69.99", "msrpPrice": "129.99", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Dreadnought-Acoustic-Guitar-Natural-1274115039668.gc", "skuImageId": "RA-090-Dreadnought-Acoustic-Guitar-Natural/423794000010000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RA-090-Dreadnought-Acoustic-Guitar-Natural/423794000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115039751", "price": "49.99", "regularPrice": "69.99", "msrpPrice": "129.99", "priceVisibility": "1", "skuUrl": "/Rogue/RA-090-Dreadnought-Acoustic-Guitar-Black-1274115039751.gc", "skuImageId": "RA-090-Dreadnought-Acoustic-Guitar-Black/423794000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/RA-090-Dreadnought-Acoustic-Guitar-Black/423794000001000-00-60x60.jpg", "imgAlt": "" } ] }
Ibanez Artcore AF75 Electric Guitar Another hollow body guitar to whet your appetite! The Ibanez Artcore AF75 isn’t as “old” as the other models here but it has earned a huge following because of its affordability, quality workmanship and versatile sound. Suitable for a variety of music styles, the Ibanez AF75 Artcore is also perfect for beginners eager to get started on a moderate budget.
Guitar amplifiers generally incorporate at least a few effects, the most basic being tone controls for bass and treble. There may be some form of "overdrive" control, where the preamplifier's output is increased to the point where the amplitude overloads the input of the power amplifier stage, causing clipping. In the 1970s, as effects pedals proliferated, their sounds were combined with tube amp distortion at lower, more controlled volumes by using power attenuators, such as Tom Scholz's Power Soak, as well as re-amplified dummy loads, such as Eddie Van Halen's use of dummy-load power resistor, post-power-tube effects, and a final solid-state amp driving the guitar speakers.