Jump up ^ DeCurtis, Anthony (1992). Present Tense: Rock & Roll and Culture (4. print. ed.). Durham, N.C.: Duke University Press. ISBN 0822312654. His first venture, the Phillips label, issued only one known release, and it was one of the loudest, most overdriven, and distorted guitar stomps ever recorded, "Boogie in the Park" by Memphis one-man-band Joe Hill Louis, who cranked his guitar while sitting and banging at a rudimentary drum kit.
Launch price: $2,099 / £2,499 | Body: Ash | Neck: Roasted maple | Scale: 25.5" | Fingerboard: Roasted maple | Frets: 22 | Pickups: Music Man SH single coil, Music Man SH humbucker | Controls: Volume, tone, 3-way selector switch | Hardware: Music Man Modern hardtail bridge, Schaller M6-IND locking tuners | Left-handed: | Finish: Trans Buttermilk, Trans Black, Trans Maroon, Satin Natural

By far the most convenient way to DI guitar is to use a digital preamplifier that combines amp modelling, speaker modelling and effects all in one unit. More flexible still is something like a Roland VG88. This requires the guitar to be fitted with a GK2 compatible hex pickup, but in return enables the system to model pickups and guitars as well as the rest of the signal chain. All these modelling systems sound different to each other and many guitarists say they don't 'feel' the same to play as going via a real amplifier, but, in many situations, the sound you record using them is very much like the sound you hear on records. As you hear exactly the sound you're recording over the monitors while you're playing, you know just how the end result will turn out, so there's little to be said about working this way other than to rely on your ears. Nevertheless, it is worth pointing out that some of the more unlikely combinations of amplifier models and speaker cabinet models can produce unexpectedly interesting results, so don't just rely on the factory patches, most of which I've found not to do justice to the products anyway. The morphing feature used in the Digitech Genesis 3 processor is also very creative, as it allows you to combine the characteristics of two completely different amp/speaker models, sometimes with surprising results.

Description: Body: Maple - Burled - Top Wood: Maple - Burl - Neck Attachment: Set - Neck Wood: Mahogany & Maple - Neck Construction: 3 Piece - Fingerboard: Ebony - Frets: 20, Medium - Inlay: Pearloid & Abalone - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: ART-W - Bridge Construction: Ebony - Cutaway: Single - Hardware: Gold - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Blue Lagoon - String Instrument Accessories: Hardshell Case
Acoustic guitar body sizes and styles differ between manufacturers. The C.F. Martin Company has been at the forefront of setting trends in body styles and sizes, and many companies have followed suit with their standards as a solid foundation,and altering their designs to creat custom sizes and styles. The following describes some of the common acoustic guitar body sizes and styles, and shares a little bit about the sound and tone profiles.   These profiles do not follow Martins standards to a tee, but do exhibit some of the most commonly used acoustic guitar body sizes and styles used, many having been influenced by the Martin Guitar Company.
DIY Guitars is Australia’s home of the best guitar kits. We stock a large range of kits at great prices, which will be delivered to your door! Whether you’re looking to shred like a madman, or play some classical blues riffs, we have the guitar kit for you! We also stock high quality ColorTone guitar stains and plenty of guitar accessories to help make the perfect guitar to suit your needs.
Locking vibrato: Often referred to as a Floyd Rose bridge after its inventor, like the two-point rocking tremolo, it provides individual intonation and height adjustments. It rocks on two bolts in the top of the guitar and is spring-loaded. The difference is that it clamps down on the strings at both the bridge and head nut. The result is rock-solid tuning, even when the vibrato arm is used radically.

The guitar pedal community is enormous. From the big name brands like Boss and Electro-Harmonix, to the lesser-known boutique effect pedal brands, such as Big Ear N.Y.C and Adventure Audio (the creators of the Fuzz Peaks pedal). This vast sea of guitar pedal manufacturers makes sure that if there is a tone or sound you are looking for – you can probably find a guitar pedal to do the job. However, sometimes you need something done your way, and that is where building DIY guitar pedals comes in.

Welcome to the world of premium! While there are several tiers of boutique amplifier priced higher than $1000, this category is when you really start to hit the high end. Some of the most iconic guitar amps sit in this section, although all models are capable of performing on big stages and professional recording studios with pro-grade features, exceptional tones and massive power, extending into 100 watts and above. One amp you will find in this market is the legendary Peavey 6505 Plus head, which has helped shape the sound of metal over the past few decades.
Berry snapped one up immediately in 1958 and has played the ES-335 or its slightly fancier relatives the ES-345 and ES-355 since then. A few years later the model was embraced by Freddie King. Alvin Lee made history with an ES-345 at Woodstock, speeding through “I’m Going Home,” and Larry Carlton’s incredibly lyrical ES-335 can be heard on great Steely Dan albums including The Royal Scam and near-countless other sessions. Whether equipped with humbuckers or P-90s, semi-hollow body guitars sound sweetly beautiful, but can also grind. Ultimately, however, they remain a middle ground between the electric solid body and the hollow body models.
{"pageName":"[gc] pdp: washburn xmdlx solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","products":";114096449;;;;evar65=null-Guitars-Washburn","linkInternalFilters":"javascript:,guitarcenter.com","channel":"[gc] shop","prop7":"[gc] product detail page"}
Dive bomb is a guitar technique in which the tremolo bar is used to rapidly lower the pitch of a note, creating a sound considered to be similar to a bomb dropping. One of the most recognized pioneers of this technique is Jimi Hendrix. Other notable musicians who are widely known for using this technique are Eddie Van Halen and Joe Satriani. - winner333
Thanks to its small size and slim neck, you get to play this guitar and improve your skills with ease. The cutaway design also gives you easier access to the higher frets for tapping or other more advanced techniques. This guitar has a spruce top that improves the sound quality as it ages, meranti back and sides, and rosewood bridge and fingerboard.
By 1966 Daniel sold Danelectro to MCA, but remained with the company. In 1967 the Coral line of guitars is introduced. At the time, Danelectro sold about 85% of it's products to Sears. So MCA started the Coral line to sell to other distributors. The difference was the Coral hollow bodies (only) were manufactured in Japan. All other Coral parts were made in the New Jersey Danelectro plant. Also all Silvertones and Danelectro instruments were made entirely in the U.S.

Reverb: Reverb units simulate the spacious sounds produced naturally in a huge stone cathedral (or other acoustic space such as a hall or room). This is done by creating a large number of echoes that gradually fade away in volume or "decay". One early technique for creating a reverb effect was to send an amplified signal of the music via a speaker to another room with reflective surfaces, such as a tile bathroom, and then record the natural reverberations that were produced. A plate reverb system uses an electromechanical transducer to create vibrations in a plate of metal. Spring reverb systems, which are often used in guitar amplifiers, use a transducer to create vibrations in a spring. Digital reverb effects use various signal processing algorithms to create the reverb effect, often by using multiple feedback delay circuits. Rockabilly and surf guitar are two genres that make heavy use of reverb.[89]

Half a step down from standard, used by bands such as Emmure, TesseracT and Meshuggah in their earlier days, Jeff Loomis (now formerly of Nevermore), Cannibal Corpse mid-career, ERRA, Hypocrisy on End of Disclosure, Adema, American Head Charge, Sonata Arctica in their album Unia, Mushroomhead, Korn in Neidermeyer's Mind demo album, Revocation, Dir En Grey since "Dum Spiro Spero," After The Burial on Forging a Future Self album, Chad Kroeger of Nickelback on the song "This Means War" (Ryan Peake used a six-string), Slayer (on War Zone and Here Comes the Pain from God Hates Us All), and Trivium on Silence in the Snow, The Sin and the Sentence, and all live performances of songs previously written on standard tuned seven string guitars.
We ship exclusively with FedEx / Signature Required and only ship to listed address on the item order page. Tracking will be provided and uploaded to Reverb once shipping is processed. We strive to ship ASAP however processing can take 1 to 2 business days from the time payment has cleared. FedEx does not ship on Saturdays or ship to PO Boxes. Shipping Fee's are subject to change if costs are much higher than expected.

The Smiths' guitarist was a guitar genius for the post-punk era: not a showboating soloist, but a technician who could sound like a whole band. As a kid studying Motown records, Johnny Marr would try to replicate not just guitar riffs but piano and strings too, all with his right hand. His voluptuous arpeggios – often played on a chiming Rickenbacker with incredible flow and detailing – were every bit as essential to the Smiths' signature sound as Morrissey's baritone. And he was a tireless explorer: For 1983's "This Charming Man," Marr dropped knives onto a '54 Telecaster, a revelatory incident that Radiohead may have been alluding to in their Smiths-inspired "Knives Out." "He was a brilliant rhythm player, rarely played solos, so full of sounds," said Radiohead's Ed O'Brien – part of an entire generation of British guitarists who took their cues from Marr. "I've been in the studio with him, and there's nothing he cannot do on guitar," said Oasis' Noel Gallagher. "The man's a fuckin' wizard."
You may not have considered Orange Amplifiers before, but they’re a company with a history that dates back to the early days of hard rock. If you watch footage of rock bands from the 1960s you’ll see Orange amplifiers onstage almost as much as Marshalls. The British amp builder has had its ups and downs since those glory days, but today Orange is as strong as ever.

I wish I knew what goes on in there. I'm told it is a simple cut of the laminated neck and then the tone block is glued to the back. I hope it is that simple as I am about to perform some major surgery on my 9 ply neck to acomidate this construction technique . If any body out there can lend some advise on this , please do so I don't turn my bass into a clock!

Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
I have found, like others, that I'm very comfortable with a 9.5" radius Modern C neck. I prefer it if the neck is on the chunkier side of Modern C, but I'm OK with most of 'em. Wider string spacing is helpful too, but would probably be a detriment to someone with shorter fingers. I rarely play fast (OK, I can't really play fast) so a flatter thinner "shredder" neck holds no advantages for me.

I’m Björgvin Benediktsson. I’m a musician, audio engineer and best-selling author. I help musicians and producers make a greater impact with their music by teaching them how to produce and engineer themselves. I’ve taught thousands of up and coming home studio producers such as yourself how to make an impact with their music through Audio Issues since 2011.
The Marshall JMP Super Bass is a 100 watt amp. Lemmy, bassist/lead singer of Motörhead, used numerous of these amps to drive cabinets with four 12" speakers and others with four 15" speakers. His amps were labelled named “Killer,” “No Remorse,” and “Murder One".[5] The Peavey Mark IV is a large, solid-state amp providing 300 watts at 2 ohms; the Mark IV was known for its affordable price and its reliability.[6]
The truth is that I've never known what it's like to not want to play music of my own because I come from an Irish family that all played instruments. Luckily for me, my parents were very young when I was born -- they were like sixteen, seventeen -- and they were from a tradition of people playing instruments, accordions, pennywhistles, guitars, harmonicas and things like that -- cheap little instruments. But because they were young and moved over to Manchester, they liked rock and roll and pop music of the day.
No, you’re right. The more I think about it, the more I see the attraction. Plus, I was wrong in my previous comment when I said the sides would sound the same up to the limit of the smaller cap. Because I think they’re be audible resonance differences between the two values. It’s the same reason why the scheme I’m discussing differs from a standard tone control. And I sound vague, it’s ’cause I am! One reason I’m eager to explore this …

All this is to say that you don't need to worry about getting your hands on a large amp. Small amps perform better for the overall sound of your band in most venues, and any venue big enough for you to need more volume is going to mic your amp anyway, giving you all the juice you'd need. So, as you look at the amps on our list, you can evaluate them based on their EQ options, their effects, and, frankly, their look.
That's what I'm hoping to address in this post along with clearing some common misconceptions too. The guitar world and community is very big on the vintage thing, and that has filtered down to replacement parts of course too. It is very easy to get lost in the world of 'vintage' style parts making an improvement in tone, so let's cast those notions aside here and look at the facts of why in some cases that's both correct and incorrect. Tim McNelly of McNelly Pickups put it really well in a recent social media post '..New electronics won’t necessarily make your guitar sound any different than it does now. New pots won't NECESSARILY change the tone if you don't know the exact value of the pots coming out..'. I think this is a really great way to put it and a great starting point for this post and discussion (feel free to comment too!).
The question is now - do you need the entire bundle? When it comes to the presets, the guitars are all very unique, but because of the mass amount of tone-shaping available once you start twisting and manipulating away there becomes less and less of a distinction — the bundle being over a third less than individually purchasing them doesn’t help the decision making factor at all.   
This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.

I cut my template with a jig saw and a fine tooth blade to make sure it kept a straight edge. Then i mounted it to the body blank using small screws in the ares that would be routed out later like the neck cavity area and where the pick ups would be. You will want to start routing a bit outside your line or the edge of the template so you can get you router bit to the depth it will need to be at for the ball bearing to follow the template. I use a 1/2"x1" bit with a ball bearing guide on top.I make several passes around the body, lowering the router 1/4" at a time for smooth easy cuts. Once you have made your pass were the bearing runs along side the template, it is much easier to rout and you will end up with a nice squared edge to the body.

For better or worse, by 1982 the taste for natural-finished, neck-through guitars with lots of switches and active electronics had begun to move on. On the horizon were the brief affair with weird-shaped “heavy metal” guitars and the impending first Strat-mania and the rise of Superstrats which would pretty much define the remainder of the decade. 1982, and the 18 and 28 Series, marked the end of Martin’s direct manufacture of electric solidbody guitars.
Some solid-bodied guitars, such as the Gibson Les Paul Supreme, the PRS Singlecut or the Fender Telecaster Thinline, among others, are built with hollows in the body. These hollows are designed specifically not to interfere with the critical bridge and string anchor point on the solid body. The motivation for this can be to reduce weight, to achieve a semi-hollow tone, or both.
It’s not known how long this A group lasted – probably only a couple more years, except for the U-65RN. By ’76, the U-65RN was still around, now promoted with 17 watts, Hammond reverb, tremolo, 10 transistors, and a 12″ heavy duty speaker. This looked pretty much the same, except the logo was reversed in white out of a black metal strip above the grille and the power switch had changed. At some point, the U-65RN was joined by the UB-252 bass amp, offering 20 watts with a 15″ speaker, presumably similar and transistor. These are the only two Univox amps listed in a 1979 price list (contained in the 1980 book), though, as you see over and over, others may still have been available.
It has been said that Barney never played his signature Kays. On the contrary... Barney Kessel has been photographed in concert with the Kay K8700 Jazz Special on multiple occasions, has made appearances at Waldo's Jazz Club on the television classic "Johnny Staccato - Television's Jazz Detective" and has been confirmed by son Dan (who also recorded with the Artist on several famous recordings) to have used the Artist to record countless rock, pop, r&b and blues hits with the most popular performers of the early '60s.
{ "thumbImageID": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "defaultDisplayName": "Sterling by Music Man S.U.B. Ray4 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Black Rosewood Fingerboard", "sku": "sku:site51378221681150", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard-1378221681150.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Walnut", "sku": "sku:site51331921974523", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Walnut-1331921974523.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51358268440972", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Mint-Green-1358268440972.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Blue Rosewood Fingerboard", "sku": "sku:site51378221681125", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard-1378221681125.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050-00-60x60.jpg", "imgAlt": "" } ] }

Lou Reed has been blowing traditional guitar styles to bits since his Velvet Underground days. A fan of Ike Turner's R&B and Ornette Coleman's free jazz, he created epic bad-trip psychedelia on songs like "Sister Ray." "He was rightfully quite proud of his own soloing," wrote fellow New York guitar luminary Robert Quine, "but resigned to the fact that most people weren't ready for it." As a solo artist, Reed kept on ripping up the rulebook: See 1975's Metal Machine Music, a noise opus that took feedback further than Hendrix could have imagined.
An effects pedal signal chain is simply the order in which a series of pedals are connected. If you have ever seen a player use a pedal board, the order of his pedals make up his signal chain. And if by some chance you thought that you can simply place these pedals in any sort of order and still get the same results – think again! Even if you’re just working with two pedals, you will get a different sound depending on the order.
With that said, it’s important to make a distinction between reverb pedals and echo pedals. These two are often time a source of major confusion. Here’s the deal. Reverb is similar to an echo in a sense that you are hearing the sound as it bounces off a surface. However, reverb is fairly quick and happens almost instantly. Echo effect, on the other hand, takes much longer to reach back to the user. One way to understand the difference is to yell in a smaller room, and then go out and yell in a canyon. Similar goes for delays. If you want to learn more about delay pedals, check out our dedicated guide here.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.

Definitely agree that Fender should be number one. Marshall is over rated, and fender brings the tone way better then a Marshall hands down. Marshall makes you pay for their name, fender only charges you for the amp components and the time tested fender quality. Why do you think so many amp companies try to replicate the fender tone?... Because its awesome and blows peoples minds!
Martin also developed a line of archtop instruments during the 1930s. Their design differed from Gibson and other archtops in a variety of respects–the fingerboard was glued to the top, rather than a floating extension of the neck, and the backs and sides were flat rosewood plates pressed into an arch rather than the more common carved figured maple. Martin archtops were not commercially successful[citation needed] and were withdrawn after several years. In spite of this, during the 1960s, David Bromberg had a Martin archtop converted to a flat-top guitar with exceptionally successful results, and as a result, Martin has recently begun issuing a David Bromberg model based on this conversion.
Flanger effects simulate the studio trick of repeatedly putting your thumb on a tape recorder’s reel for a second and then letting the reel (and music’s pitch) catch back up while a dry (unaffected) signal plays alongside. Flangers usually have a depth setting, which controls the intensity of the effect, and a rate control that adjusts the speed of the cycles.
Real quick, I'm assuming you're talking production quitars here, not boutique or full on custom rigs. In that arena, one stands above all others... Gibson. While I was working at strings and things I was shocked at the way guitars were coming in from the factories... Completely not at all set up, some appears to have barely bothers to install strings. It was up to us to set them up to a kennel we felt appropriate, and I'm talking good guitars here, including the brands I play. And then came Gibson. Out of the box they are set up as prefect as can be without being personalized their final fit and finish is unparalleled, I'm sure their final inspection are all former Marine drill instructors and in need of therapy and on top of the physical aspects, at the bitter end they get handed to a guitar player, and some damn good ones by the way, to see if they make muster in playability and tone. It was rare to have one come out of its shipping box that wasn't nearly perfectly tuned. Hats off gents they just don't do it like that anymore ya know. Anyhow, the best one is gonna wind up being the one you like the best at least until you get old like me and start to appreciate somebody find things the right way instead of the fast/more profitable/ whatever else way. A little pride in your work late forever, especially in a disposable society such as this one...

Another consideration, and something you’ll read a lot about, is the pickups, which give the guitar its voice. There are two kinds of pickup in this price range: the single-coil (which gives a bright, sparkly sound) and the humbucker (which is fuller, meatier and perfect for rock and metal). Both are as common as each other in this budget range, and a guitar with a mix of both will offer you the best versatility.

This thing is awesome! For its price you can't find any other processor that can plug into your computer and easily navigate the pedals. To connect to your computer or laptop you will need a standard printer cable (I would pick up one of the amazon basic cables for cheap.) I bought a 10 foot one which is plenty to run from the pedal to my music stand. Also once you are connected to your laptop via the USBcable, all sounds from your laptop will run through your amp/headphones. That confused me the first time when my computer speakers sounded better, haha. If you are curious, It comes with a power supply.
Tremolo is a regular and repetitive variation in gain for the duration of a single note, which works like an auto-volume knob; this results in a swelling or fluttering sound. This effect is very popular in psychedelic and trip-hop music. The speed and depth of the flutter are usually user-controlled.This is a volume-related effects pedal. This effect is based on one of the earliest effects that were built into guitar amplifiers. Examples include:
Chorus is an effect that doubles and detunes your signal. It can add an otherworldly effect to your tone, as well as add emphasis to your playing. Chorus adds shimmer and depth to your signal. While it shines in making clean playing more lush, many players, Zakk Wylde included, use chorus to add a doubling effect to their solos, which really will bring it to the forefront of a song. When used carefully, you can even approximate the sound of a 12-string guitar.

Later, on-board electronics allowed guitarists to move about the stage, rather than stay immediately in front of a microphone. On-board electronic tuning, availability, uniformity, and frugal costs facilitated performances by guitar ensembles like Robert Fripp‘s Guitar Craft students. Ovation has also produced solid-body electric guitars and active basses.

Dobro – we’re still in Dobro territory here, not National – quickly followed suit in 1934 with the Dobro Electric Resophonic guitar. This was basically a wood-bodied Dobro resonator guitar with a Stimson pickup just in front of the handrest. Unlike the All-Electric, this had the poles perpendicular to the strings. This also did not especially go over, and dropped from sight before the year was up.
Wah and EQ manipulators work best before distortion and overdrive devices, near the start of the signal chain. The one exception is the Fuzz Face or any vintage-style fuzz, which needs to be slotted in before the wah. Try it – put your wah before and after your distortion and listen to how different it sounds. Also, compressors tend to work best when placed before drive effects.

“The tremolo tail assembly was engineered specifically for the Spectrum ‘5.’ The bridge is an integral part of the whole assembly and is, of course, universally adjustable. The marvel of it all, however, is that the tremolo does not exert any friction (hence no wear and tear) on the strings. The tremolo action causes the whole bridge assembly to move smoothly back and forth.
The three Teisco amps included the Teisco-88, the AMP-71R and the Miny. No details are available on these, but they were fairly rectangular cabinets with top-mounted controls. The Teisco-88 had “Teisco” and a big “88” on the grillcloth. The ’66 model was a tube amp, so this likely was, as well. I suspect the others shown were tubers as well. The Miny had the italicized T logo on the front. The AMP-71R had reverb.
Inspired by the Fuzz-Tone’s ability to add an aggressive swagger to any guitar melody, the mid-60s saw an explosion of copycat fuzz stompboxes. Most of the imitations were atrocious, but some became infamous. A few deliberately tried to combat the limitations of guitars themselves, like Gary Hurst’s 1965 Sola Sound Tone Bender MKI, which reused the three-transistor circuit of the Fuzz Tone. For the MKI, Hurst tweaked certain resistor values, which extended, or sustained, the guitar notes for longer. A two-transistor version of the tone bender (the MKI.5) morphed into Jimi Hendrix’s favorite stompbox, the simple and durable Arbiter Fuzz Face. The later model, the MKII, was at the heart of Jimmy Page’s secret sound in early Led Zeppelin recordings, When the Fuzz Face was released in 1966, it set a precedent for Hendrix imitators (“I Don’t Live Today” being the most frenetic extension of the Fuzz Face’s limits). With a keen ear for experimentation, Hendrix would often prefer the Fuzz Face’s tone when the battery was half-charged, in large part because germanium transistors fluctuate according to voltage. Guitarists would often have to wade through different batteries in order to find their own tone.
{ "thumbImageID": "LC100-Classical-Guitar-Natural/518978000010000", "defaultDisplayName": "Lucero LC100 Classical Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural", "sku": "sku:site51274115036014", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Natural-1274115036014.gc", "skuImageId": "LC100-Classical-Guitar-Natural/518978000010000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LC100-Classical-Guitar-Natural/518978000010000-00-60x60.jpg", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51274115036008", "price": "99.99", "regularPrice": "129.99", "msrpPrice": "259.99", "priceVisibility": "1", "skuUrl": "/Lucero/LC100-Classical-Guitar-Black-1274115036008.gc", "skuImageId": "LC100-Classical-Guitar-Black/518978000001000", "brandName": "Lucero", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/LC100-Classical-Guitar-Black/518978000001000-00-60x60.jpg", "imgAlt": "" } ] }

Well technically, the floor and the ceiling do shape the tone, post amp. Room acoustics are a major factor in the quality of sound recordings. Also Dan isn't wrong. Each thing that vibrates that eventually moves the pickup (while a note is being played or sustained) will disrupt the magnetic field. In physics there is hardly ever an instance where things have absolutely zero effect on the things around them. It comes down to the significance of the effect. For example, if something moves the pickup .05 picometers six times a second, then it likely has a negligible effect on the sound (i.e. our ears are not capable of detecting any difference. There does come a point where other variables do begin to change the characteristics of the sound. Additionally, as a string is struck, due to the rigidity (or slight lack thereof) the neck and body will vibrate, changing the distance between bridge and nut. The shortening and lengthening of this distance will then change the vibration frequency of the string. This can result in the dampening of vibration or potentially slight amplification of frequencies or overtones. Overall, it is impossible to say with absolute certainty that something does not have an effect on something else in this case. The truth, however, is that the degree to which the change is noticeable may not be detectable by the human ear.
Guitar techs specialize in stringed instrument technology, providing support for all issues relating to electric and acoustic guitars. They might work in music shops repairing, tuning and finishing guitars for customers. Techs may also be hired by bands to maintain and prepare instruments before, during and after shows, including the set-up, stringing and tuning of guitars, bass guitars, pedals, cables and amplifiers. Additional responsibilities include instrument shipment between shows and maintenance during recording sessions. Securing employment with a band may be a competitive endeavor, and travel is often required for those positions.
Quite often, power chords are played with only down-strums, and often with a technique called palm muting, which might make it less vital to mute the unused strings. But it is REALLY important to mute them because many songs do use up- and down-strums with power chords (‘Smells Like Teen Spirit' springs to mind). Also, if you don't mute them, and you play loud with distortion, the strings might ring out—even if you don't pick them—and which will make your chords sound messy. So make sure you get your string muting sorted now!
In the 21st century, European avant garde composers like Richard Barrett, Fausto Romitelli, Peter Ablinger, Bernhard Lang, Claude Ledoux and Karlheinz Essl have used the electric guitar (together with extended playing techniques) in solo pieces or ensemble works. Probably the most ambitious and perhaps significant work to date is Ingwe (2003–2009) by Georges Lentz (written for Australian guitarist Zane Banks), a 60-minute work for solo electric guitar, exploring that composer's existential struggles and taking the instrument into realms previously unknown in a concert music setting.
If you want to get really technical, the electronics “on board” a basic non-battery-powered guitar form an “RLC” circuit, the letters standing for resistance (R), inductance (L, since I is used for current) and capacitance (C), three key values in an AC circuit that determine the relative “impedance” of various frequencies. The inductor is the magnetic pickup (which “induces” voltage/current based on the vibrating metal string), the resistor is the tone knob (a potentiometer or variable resistor), and the capacitor is a tone cap, in this example 0.05 uF (about right for a humbucking pickup like in a Gibson Les Paul).
The honest truth lies with the listener’s ear and capability to identify a sound with an individual player.  B.B. King was known for his tone and only later revealed his secret mentioned above.  It wasn’t even really a secret; it was more of a physical shortcut that allowed him to express himself.  You should choose what feels and sounds best for your own musical expression.
In attempting to amplify acoustic guitars, inventors and musicians alike soon discovered an issue that is still problematic for many of today’s acoustic guitarists — feedback. Hence, the evolution of solid body electric guitars, spearheaded by Vivi-Tone in 1934. Rickenbacker followed up by distributing the Electro Spanish in 1935 (Electro Spanish later being shortened to ES by Gibson for their line of hollow body and semi-hollow electric guitars), and the Slingerland Songster 401 was introduced in 1936. But some guitarists — mainly jazz and blues musicians — came to miss the warm, full-bodied tone that can only be generated by the free-space resonance of tops and backs made from quality tonewoods. And so it is that we also have the hybrid design of semi-hollow body electric guitars.
The first guitar amplifiers were relatively low-fidelity, and would often produce distortion when their volume (gain) was increased beyond their design limit or if they sustained minor damage.[3] Around 1945, Western-swing guitarist Junior Barnard began experimenting with a rudimentary humbucker pick-up and a small amplifier to obtain his signature "low-down and dirty" bluesy sound. Many electric blues guitarists, including Chicago bluesmen such as Elmore James and Buddy Guy, experimented in order to get a guitar sound that paralleled the rawness of blues singers such as Muddy Waters and Howlin' Wolf,[4] replacing often their originals with the powerful Valco "Chicagoan" pick-ups, originally created for lap-steel, to obtain a louder and fatter tone. In early rock music, Goree Carter's "Rock Awhile" (1949) featured an over-driven electric guitar style similar to that of Chuck Berry several years later,[5] as well as Joe Hill Louis' "Boogie in the Park" (1950).[6][7]
Description: Body: Mahogany - Body Construction: Semi-Hollow (Chambered) - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 24 - Inlay: Dot - # of Strings: 6 - Scale Length: 25.5" (65cm) - Headstock: 6 In-Line - Bridge: Tune-O-Matic - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, Diecast, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: HoneyBurst, Green
Tremolo bars - Many lower-end guitars are designed to look cool and are equipped with floating bridges for super tremolo bends and flutter. They look cool , but a sad fact is many of these lower end models have low quality hardware. There is nothing more frustrating than being a newbie, buying a hot looking guitar, and have to fine-tune it every 2 minutes. Avoid this, or buy a decent bridge for around $100.00 extra and install it.
Splitting the humbucker #1: by grounding the coil-tap and connecting the hot lead to output we’re rendering the coil closer to ground useless because both of it’s leads are grounded. What we’re left with is the coil closer to the hot lead. Since we only have one coil, it will not be hum-cancelling on it’s own. It’s common to split a humbucker, so it can be wired with another coil in parallel, making the noiseless combination, especially on H-S-H guitars.
This is an absolutely stunning OM acoustic in MINT/As New Condition. This has been in my personal collection for a few years. In the words of Bill Kraus, the builder: An OM model in my favorite combination of woods: Red spruce top, Honduran rosewood back and sides, curly Koa bindings. I first heard about Bill Kraus from my good friend, Scott Freilich of Top Shelf Music in Buffalo, NY. Scott has been a factory authorized Martin repair center since 1979 and has seen the finest 6 figure pre-war Martins. Scott was raving about Bill Kraus, his knowledge of tonewoods, and the insane quality of his guitars. I also learned that Stan Jay of Mandolin Bros. was equally impressed with Kraus Guitars and had started carrying Bill’s guitars in his store. Every Kraus guitar at Mandolin Bros. has sold!
Thanks, guys....well, I don't think I'll be able to play any Agiles but I'll try and get my hands on some Epi's and give them a whirl. How are the stock pickups on both? Definitely in need of a swap? I had an Epi Les Paul an eon ago and don't recall liking the stock pickups, but I was also in highschool then and knew nothing about tone. Also, a quick look at Ebay indicates that any Epi SG in a color other than black or cherry will be hard to come by...
Because of the way the guitar is tuned and the amount of spread between the notes of each individual strings chords are voiced in certain very particular ways. These voicings are physically impossible to imitate on a keyboard, at least with any reasonable amount of facility. Conversely, keyboard voicings are generally unplayable on a guitar, as you'd have to be playing more than one note on a single string in many cases.
Very disappointed! This was a gift from Santa this morning and the amp failed miserably. Would not work at all. Not with a battery or an adapter(which by the way is not included). Amp started to smell like it was burning/melting even though it showed no power at all. Son is very disappointed to say the least and so is mommy. Only thing he wanted was an electric guitar and he couldn't even enjoy it this morning. How do I explain returning it to Santa...
One glance at this bad boy reveals just how accurate it is to the 1959 version. We are talking exact same tubeless truss rod assembly, aniline dye, exact same finish... everything. In terms of hardware, they went with a set of Klauson Deluxe tuners and period specific Tune-o-Matic bridge. The custom humbuckers were coiled and voiced to perfectly match the original PAF design from the late '50s which was done using Alnico III magnets and 42 AWG wire. The performance of this guitar is an experience that is rarely found out there.
My favorite guitar effect is Tremolo with a touch of echo. This works well on songs with slower melodic guitar leads and slower rhythms. Tremolo is an effect that has a speed adjustment and amplitude adjustment. The speed needs to be adjusted to the song tempo. This was popular for many songs written in the 1950’s. If you are a guitar shredder you will not be happy with this effect. I have a Boss Guitar Pedal and Line 6 Pod XT and use this effect from the pedal. I am not crazy about software generated effects as there is not enough space on stage for all the equipment and adding a MacBook and keeping it from getting knocked around would be too difficult. After recording I have used Garage Band and this software is easy to use. I probably have four or five software packages and they are too overwhelming at times. I have given up trying to figure out how to use the software with my expensive Presonus 24 track digital AI Board. It is almost impossible to use these recording software packages without having expensive school training.
Solid Body: This build is rather self-explanatory, meaning there is no sound box (as typically seen in other instruments, especially acoustic guitars) but instead relies on an entire electric pickup system to gather the vibrations of the strings to portray your sound. This typically dominates the preferred ‘guitar type’ category unless you’re aware of what the differences are in terms of sound (telecasters, Ibanez, etc.). The perks of this solid build include the ability to be amplified at very high volumes without feedback worries, giving us more combinations when it comes to shapes\designs, and are very responsive to the use of effects since it’s nearly entirely dependent on amplification. Preferred genres? Rock, punk, metal, classic rock, etc.
Valve amplification is more or less linear—meaning the parameters (amplitude, frequency, phase) of the amplified signal are proportional to the input signal—so long as the voltage of the input signal does not exceed the valve's "linear region of operation". The linear region falls between "1." the saturation region: the voltages at which plate current stops responding to positive increases in grid voltage and "2." the cutoff region: the voltages at which the charge of the grid is too negative for electrons to flow to the plate. If a valve is biased within the linear region and the input signal's voltage exceeds this region, overdrive and non-linear clipping will occur.[40][43]
1963 D-28e. This model is a paradox. Martin took a great guitar with great flattop tone, and then added DeArmond pickups and knobs to the top. This ruined the tone (a flattop develops most of its tone from the vibrating top). And the DeArmond pickups don't amplify the acoustic properties of the guitar. So you end up with a electric guitar sound, while playing a flattop. Because of this, the value for D-28e's is really low. Some people go to the extreme of re-topping this model. This essentially gives you a vintage Brazilian rosewood D-28, but with a new top. A double edge sword of originality versus usability. Martin made only 284 D-28e's from 1959 to 1964, before giving up on the model. Rare, but for very good reason (no one wanted them, then or today!).
The DI approach most likely to capture the spirit of the original sound is to take a DI feed from the speaker output of a conventional guitar amplifier and feed this into the type of speaker simulator that also includes a dummy load to keep the amplifier happy (valve amplifiers can be damaged by running them into an open circuit). Emulators with a built-in load are generally very much larger than the regular DI box-size emulator-only products. Some of the emulator-only devices can be run from a speaker output, but you still need to plug in either a separate dummy load (usually an 8Ω resistor rated at over 100 Watts on a heat sink) or the original speaker to protect the amplifier from possible damage. Apart from the dummy load, which is passive, the circuitry may either be passive or active.
Double bass players playing in genres where a louder amplified tone (emphasizing the fundamental frequencies) is desired for the bass may be more likely to face the problem of audio feedback. Feedback for double bass generally manifests itself as a sharp, sudden high-volume "howling" sound that can damage loudspeakers. When acoustic instruments with resonant bodies are amplified with microphones and piezoelectric transducer pickups, the common approach used for amplified double basses, they are prone to have feedback problems. For acoustic bass guitars, soft plastic discs are available to block the sound hole, thus reducing feedback. Upright bass players sometimes use homemade foam or styrofoam inserts to fill in the "f" holes of the double bass, which can reduce feedback.
So Rad...It's ok...To think that we were going to get all the campaigns and multiplayer for all the Halo's was amazing, and the game itself when it works is amazing just like it always has been, but I bought my Xbox One just for this game and the fact that it was broken for more than half a year is a shame and honestly unfair to the consumer, I still give it 3 stars since it works decently now but it lost its potential to be an amazing game....Lots of people seem to be having issues with multiplayer and campaign achievements; however, I have not noticed any campaign issues other than one time when I accessed a terminal it would not let me resume my game but after a restart I found I had just hit a checkpoint so no work was lost.
There are several factors to consider when establishing a good guitar tone. Here are some guitar tone tips.  Lets start with electric guitar tone. With electric there are three major factors to consider…the guitar, the amp, and the effects. There are all types of guitars with all types of pickups. Single Coil pickups and humbucking pickups are the two main pickup categories. I prefer humbuckers for the simple reason that they are less noisy. I like the tone of a good single coil pickup but I have never had much luck with keeping them from buzzing terribly. This is especially a factor when you are playing gigs in dive bars or clubs with bad electric wiring. You are much better off with a humbucking pickup. If you are gigging musician I would suggest having at least one in your arsenal. Generally speaking your Fender strats have single coils and your Les Pauls have humbuckers.
The fourth type of system employs string-through body anchoring. The strings pass over the bridge saddles, then through holes through the top of the guitar body to the back. The strings are typically anchored in place at the back of the guitar by metal ferrules. Many believe this design improves a guitar's sustain and timbre. A few examples of string-through body guitars are the Fender Telecaster Thinline, the Fender Telecaster Deluxe, the B.C. Rich IT Warlock and Mockingbird, and the Schecter Omen 6 and 7 series.