Crafted with quality body woods, it features a solid cedar top with a wild cherry back and produces a dynamic sound with a good mid-range that projects wonderfully. Sitting at the top is a distinctive, tapered headstock, which allows for greater tuning stability, while the hand-finished silver leaf maple neck – with rosewood fretboard – is slightly fatter than other acoustics, and is great for fingerstyle guitarists.
This is a Supro Supreme Hawaiian Guitar Model 1400 from somewhere around 1945. I've seen an identical one that was purchased new by the original owner during that year exactly. That date appeals to my love of WWII history, of course, because it was the last year of the war. I found this one languishing in the back of a vintage guitar store in Williamsburg, Virginia, while my wife and I were on our 30th anniversary holiday trip. The guitar is covered in lovely reddish-brown "mother of toilet seat" and has a non-slip back.
After the introduction of the Fender Stratocaster Ultra series in 1989, ebony was officially selected as a fretboard material on some models (although several Elite Series Stratocasters manufactured in 1983/84 such as the Gold and Walnut were available with a stained ebony fretboard). In December 1965 the Stratocaster was given a broader headstock with altered decals to match the size of the Jazzmaster and Fender Jaguar.
Vocal Widening: One of the send effects I most frequently use at mixdown has got to be the classic vocal-widening patch that I always associate with the vintage AMS DMX1580 delay unit. From a mono send a stereo ADT-style effect is created using two pitch-shifting delay lines, panned hard left and right. Normally, I set the first channel to 9ms delay, with a pitch shift of -5 cents, and the other channel to an 11ms delay, with +5 cents of pitch shift. That said, though, I will often tweak the delay times a few milliseconds either way, as this can dramatically alter the effect's tonality. Mike Senior
Among other things, Peavy is somewhat famous in the guitar amps world for being one of the first manufacturers to produce a close-to-tubes type of sound from their transistors amps. While this achievement might not have seemed perfect for the most discerning of ears, their solid state guitar amplifiers are good enough for the general public not to tell the difference.
The No. 140 Supro Capitan was a handsome f-holed archtop, which was Regal-made. It sported an arched spruce top with a maple body. The hardwood neck had an ebonized fingerboard with pearl position dot and jumbo frets. An oval Supro logo plate sat on the faceplate. A single rectangular metal-covered pickup (with holes exposing the poles) sat just to the bridge side of the middle position. This pickup had six separate coils! It had a “crystaline pick guard,” probably tortoise, and adjustable compensated bridge, National-stamped trapeze tailpiece, and one volume and one tone control situated just behind the �guard. It came with a grey Servitex tweed case, and in ’42 cost $71.50.
Rhythmically I can make Shreddage II sound as authentic as a mock up can get for that instrument (which means, mostly authentic)...through conscientious (more like anal-retentive) programming and manual round robins. But of course it's always a much better idea in this case to just do the mock up and eventually get an actual guitar player yourself to record. It's extremely hard to get that edgy lead thing going, bent up and held vibrato notes.
1) The tuning keys (machine heads) are as bad as it gets and if you're planning on keeping this guitar for a while and making it really workable plan on changing them ASAP and throwing the others away as far as you can throw them - Shame on you Yamaha, you could have at least used some half decent tuners!! These are an insult to your good name. So I replaced mine with Grover Sta-Tite V97-18NA (with brass colored gear) which are the best tuners "for the money" ($40) for any guitar especially for this one. However, be aware that you will also need to replace the Yamaha bushings because the I.D. is too small for the Grover post and, unfortunately,the Grover bushing O.D. is too small for the holes in the Yamaha headstock. The correct bushing that will allow an easy proper fit of the Grover tuning pegs to the Yamaha APXT2 is Kluson MBG65N or B bushings (Google it). If you elect to do this instead of letting your friendly Luthier do it, be advised that when you knock out the stock Yamaha bushings, since they're press fit it may have a tendency to split the wood on the top of the headstock. This one modification will bring this guitar from the level of a toy trying to be a serious contender to the best little guitar that money can buy.
Am I missing something? Few MIDI artists can document the finest details of legato expressed by some human performers, but such nuance is within the scope of current notational languages. If no human can or will produce such detailed documentation of existing performances, computational machines can, if not now, soon -- unless the inexorable march toward AI that can pass the Turing test is more exorable that it might appear.

Intraday Data provided by SIX Financial Information and subject to terms of use. Historical and current end-of-day data provided by SIX Financial Information. All quotes are in local exchange time. Real-time last sale data for U.S. stock quotes reflect trades reported through Nasdaq only. Intraday data delayed at least 15 minutes or per exchange requirements.

Modelling effect – Many BOSS modelling effects use COSM or Composite Object Sound Modelling, which uses computer-processing power to digitally precisely model the electronic, mechanical, and magnetic characteristics inherent to an instrument, amplifier, or speaker, and also to create completely new sounds. Modelling effects can be dynamic or time-based – it can even make your guitar or amp sound like a completely different type of guitar or amp.
The next step up from a Fender Squier Bullet can be a Fender Squier Standard Strat, but if you can afford 50 dollars more you are the owner of a Fender Deluxe Stratocaster which is a really good guitar for beginners, intermediate and advanced guitar players who don’t want to spend a fortune but do want a good quality guitar which is decent enough to upgrade later on with better pickups and hardware to make it top notch. If you don’t want to spend a 1000 dollars on a real american Fender Stratocaster then this is the best alternative.

Many people will say that Overdrive and Distortion pedals are basically the same thing: wrong! While the overdrive tends to add gain and texture to your clean tone, emulating a cranked amplifier, the distortion intentionally clips and distorts the waveform of the guitar signal. The effect of distortion pedal is much more audible and the resulting sound is harsher and louder, and sometimes completely different from the starting sound. Distortion pedals are perfect for rock and metal players, and represents a safe boat for guitarists that may feel the need to have a backup to their tube amplifier: a distortion pedal into the clean channel of a rented amplifier can save your gig! The ProCo Rat 2 is an instant classic, while the Electro Harmonix Metal Muff/Top Boost gives you some serious distortion with a top boost in single box. And for your über-metal needs, the Harley Benton Extreme Metal is here to help.

WET SANDING You can wet sand with 600 or 800 grit wet sanding papers that you can get from the hardware or auto body shop before you apply the clear coats. You can get precission paper from Stewart Mac Donald that are suppose to cut better, last longer and yeild a better result, but I have never tried them so that's up to you. When wet sanding there are a few things to keep in mind. First you will need to soak the paper overnight in water. You can add a little Murphy's Oil soap to it. It will act as a lubricant and help it cut better. You could even soak the paper in a solvent if you use a laquer finish but I use water because it cleans up easier and dosen't smell. Next be sure not to overly soak the areas that you have drilled holes in. If the water get in the wood it can cause a lift in the lacquer that could lead to cracks in the finish. This is why some people choose a solvent to sand with because it is more forgiving in that area. Start wet sanding with a 600 to 800 grit paper and gradually work your way up to a 2000 plus grit. If you use water you may experience a condition in you finger tips that comes with a prolonged exposure to it called "raisoning". Just let them dry out for a while and get back to work!

Originally started as a replacement parts shop in Japan, ESP Guitars – which stands for Electric Sound Products – got their guitar manufacturing business off to a rocky start here in the United States. They were taken to court by Gibson guitars for producing instruments that too closely resembled the American brand’s guitars. But, they settled out of court in 1978 and ESP’s reputation eventually grew, thanks in part to George Lynch, the guitarist for the 80s metal band Dokken, and his signature axe pictured here – The Kamikaze Model 1. Now, ESP guitars are wildly popular amongst metal and hard rock clientele and you can hear their instruments on the records of some of the brand’s loyal artists – including the likes of James Hetfield and Kirk Hammett of Metallica, Page Hamilton of Helmet, and the guys in Children of Bodom.
Run a length of wire (approx two feet is usually plenty) through the jack mounting hole and down into the cavity. When you see the wire in the cavity pull it up through the F hole. Make sure the wire is long enough for one end to stick out the jack hole, and the other to stick out the F hole. Tape the jack hole end of the wire to the guitar with masking tape, or tie it to the strap button. This will ensure it doesn’t fall through the jack hole while you’re working on the other end.
The first thing that strikes you about Nate Savage’s Guitar Lessons YouTube Channel is how well the structured, numbered lessons are organised on the YouTube Home page itself. Overlays on the opening titles screens and the names of the lessons make it very clear about the content and help you to choose exactly what you need, or let you skip over any unnecessary stuff. His complete beginner topics go right back to “How To Hold The Guitar” which might sound really basic, but Nate’s absolutely right to nip any bad habits in the bud at the very beginning and that particular video could the most important 3:26 of your career. And I have to make mention of the high production levels on Nate’s videos. The vision and audio is excellent, the lessons are well made, and Nate’s friendly, easy-going manner makes you feel like he’s your best friend and guitar tutor at the same time.
An awesome acoustic-electric guitar at affordable price! I felt like this is one of my smartest purchase. I have an OM one with very beautiful look - ivory-color spruce top and chocolate-color back and side. The guitar comes with built-in Fishman pick-up and tuner. It has bright and sweet sound on picking, while having strong and resonant sound on strumming. With capo, the tone can be transformed to be soft and deep suitable for sad songs. Most importantly, it is a full-sized guitar playable by a lady with small hand and short arm like me!

Hawaiians were still available, but no information was available to me except on the EG-TW which was an eight-string double-neck with three telescoping legs. Each neck had two pickups, a selector switch, volume and tone control. Also offered was a curious instrument called a “Harp Guitar,” which was some sort of three-legged Hawaiian console with four electronic pedals!

Very large cabinets, such as 8x10" cabinets, may have both wheels and a long "towel bar"-style handle to facilitate moving the equipment. Some 8x10" cabinets have handles on the top and bottom to facilitate two-person carrying of the cab. Some combo amplifiers have wheels and a retractable carry handle, to enable bassists to walk while pulling their bass amp; this can enable bassists to walk onstage with their bass and amp or walk to a venue with their gear.
Pre-delay on the reverb can help separate it out from the source sound. If your reverb has no controls for pre-delay, you can simulate this using a simple delay on an aux track before the reverb. Decay Settings: Choosing the most appropriate reverb treatment for a song can be surprisingly difficult, especially if you have hundreds of presets to choose from. So, instead of regarding reverb like the glue that holds the mix together, try adjusting its parameters (and in particular the decay time) while listening to the reverb return by itself. If the decay time is too long you'll hear a continuous mush of sound; if it's too short you'll scarcely hear it unless its level is turned right up. Somewhere in the middle you should find a setting that adds rhythmic interest to your song, without overpowering it, making the reverb work for its keep. This is also a useful technique when using several reverbs in a song, to make sure they complement each other. Martin Walker
Guitar amp modeling devices and software can reproduce various guitar-specific distortion qualities that are associated with a range of popular "stomp box" pedals and amplifiers. Amp modeling devices typically use digital signal processing to recreate the sound of plugging into analogue pedals and overdriven valve amplifiers. The most sophisticated devices allow the user to customize the simulated results of using different preamp, power-tube, speaker distortion, speaker cabinet, and microphone placement combinations. For example, a guitarist using a small amp modeling pedal could simulate the sound of plugging their electric guitar into a heavy vintage valve amplifier and a stack of 8 X 10" speaker cabinets.
The prime advantage of Epiphone is that you get a guitar built to the same specs as the Gibson Les Paul, at a greatly discounted price. With that being said, an Epiphone is not equal to a Gibson simply because it shares the same design. The craftsmanship is where the two brands differ the most, as USA made Gibson’s utilize higher quality materials than the Epiphone line. Epiphone uses a cheaper mahogany in the construction of its guitars, while the electronic components are lower quality as well.
Near the beginning of Epiphone's thinline semi-acoustic range is 'The Dot', based on the timeless and legendary Gibson ES-335. The Dot feels comfortable to hold and play, and the neck, while by no means clubby, feels substantial in your palm, probably due to the 43mm width at the nut. Its slightly flattened C-profile increases marginally in depth further up the neck, making for a suitably vintage feel. An acoustic strum issues forth a pleasing, resonant ring. We'd wager that the Dot's all-maple construction has got something to do with that, but more obviously, the hollow bouts bolster the acoustic tone, inducing wry smiles to those listening. Before plugging in, listen to Ronny Jordan, then Noel Gallagher, then BB King, then George Harrison and John Lennon. It becomes immediately apparent that this style of guitar is hugely versatile. This Dot is no exception: the pickups, while not packing the punch of USA PAFs, offer everything form smooth and moody, front-position mellowness to screeching, bridge position rawk. It's one of the best electric guitars for jazz at this price point, too. The Dot looks fine, sounds great and plays great. To our minds, that's value for money indeed.

Here we have a Faithful Recreation of the classic Martin D-18 that was well crafted in Japan over 33 years ago. This is an excellent vintage Japanese guitar as it has been well taken care of all these years And has spent its years in California in the perfect climate to preserve the guitars original structural and cosmetic integrity its fit and finish to this day is still JVG rated at very good to excellent with no cracks or finish checking none – clean and still shines like glass….. its 1-11/16ths at the nut neck is a nice comfortable medium slim profile, neck is straight with correct amount of slight relief, action is good medium low and plays with ease and sound is clear and volume is good, tone is vintage sweet from its Aged tone woods. This is a true Lawsuit model as it has the direct image shape & size of the vintage Martin it copies is is a very cool D-18 guitar, its 33 years it’s obviously not new or mint but is surely vintage beautiful with its age and genuine warmth & patina and yes a few minor doinks but nothing to detract from its overall appeal. .
Plug an electric guitar into the input. Adjust the input drive level as high as it will go without causing the input clipping light to activate. Adjust the drive level control to a level below where the drive clipping light activates. Different reverb sounds can be achieved by lowering and raising the reverb drive level. Adjust the reverb level for a nice sounding balance between the dry and reverb sounds. Adjust the output level for the optimum volume level. Now go play some surf music.
I'm unsure if this company existed or not, but since many major electronics manufacturers jumped into the electric guitar market in the 1970s, it seems reasonable that Hitachi could have ventured briefly into guitar production. A seller of the badged guitar "Splender" claims it was made by this company. Yet another seller claims the badge Slendon was made by this company.

Harmony almost wrote the book on guitars and responsible for so many rock stars. Youngsters all over the world ordered guitars from Sears, Montgomery Ward, and later by JC Penny. These affordable guitars are now very sort after and have become very expensive. Many of these models have been copied and reissued over the years. In their heyday, Harmony was the largest manufacture of guitars in the USA. In 1964-65 they sold over 350,000 instruments. The pickup used during and around those years were made by DeArmond Company. Today Vintage DeArmond Pups are still valued and sold. Look into years of bands, and you will find VIP's of the Rock World, with a Harmony in their hands.
Some more advanced models, like the Wampler Latitude Tremolo Deluxe, bring a much more complex set of features, which include choosing the waveform and more. Whether you are looking for a good way to spice up your tone without impacting the nature of your signal, or you are just in need of a great vintage style effect, tremolo is the one to go for.
Regardless of what side anyone is on, when it comes to the tonewood debate, tonewood's relevancy is just a small part of a bigger discussion. Simply talking about guitar, sparks interest in guitar. This is and will always be a good thing. Any pursuit that expands one's creative and mental abilities can be regarded, in most cases, as a grand and noble thing. So, in arguing about tone wood, it's fanatical sides raging against each other, interest in the instrument they're picking apart will inevitably grow.
This is one of the most popular guitar brands bought by the beginner and advanced learners in India. This brand is also one of the top-rated electro-acoustic guitars for beginners. This is the Japanese brand of guitar that is available in acoustic, bass, electric, and classical guitars styles. It flourishes a full-size frigate shape with a laminated select dapper top, and mahogany back and sides. It sports a mahogany neck, with a rosewood fretboard and 20 frets, withal an Ibanez-branded headstock with pretty good closed chrome die-cast tuners. The price of this brand of guitar starts from 13,000 approximately.
{ "thumbImageID": "John-Mayer-Silver-Sky-Electric-Guitar-Horizon/L18249000003000", "defaultDisplayName": "PRS John Mayer Silver Sky Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Onyx", "sku": "sku:site51500000211941", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Onyx-1500000211941.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Onyx/L18249000001000", "brandName": "PRS", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Horizon", "sku": "sku:site51500000211943", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Horizon-1500000211943.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Horizon/L18249000003000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Frost", "sku": "sku:site51500000211942", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Frost-1500000211942.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Frost/L18249000002000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tungsten", "sku": "sku:site51500000211944", "price": "2,299.00", "regularPrice": "2,299.00", "msrpPrice": "2,299.02", "priceVisibility": "1", "skuUrl": "/PRS/John-Mayer-Silver-Sky-Electric-Guitar-Tungsten-1500000211944.gc", "skuImageId": "John-Mayer-Silver-Sky-Electric-Guitar-Tungsten/L18249000004000", "brandName": "PRS", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }