Im sure are techs at these stores that aren't bad AT ALL, but when you don't know who they are, I wouldn't trust them with a truss rod while you're not there standing over trheir shoulder watching them. I may just be paranoid, but hey, better safe than sorry is the way I look at it. I've done my own setups. And I plan to keep doing it until the day comes when I order myself a custom bass that I worked my ass off for, then I'll be willing to spend $50 on a 'properly' done setup. I dunno
And finally, it is always a good idea to have your amp set on with clean settings in order to get a clear image of the sound of your effects chain. Hitting the distortion on the amp, for example, will distort EVERYTHING in your chain, so it’s best to leave the distorting to your pedal where it can be better contained. But in the end, experiment! While these are merely a few suggestions of the general way a signal chain works, you are only limited by your creative implementation.
The internal bracing has also been updated to a forward shifted pattern to further enhance the dynamic range of the soundboard and the guitar’s overall projection. The Taylor 214ce has a nice punchy sound and good articulation. If you need more output, just plug it in and let the onboard Expression System 2 (ES2) pickup do its job. The ES2 features a patented behind-the-saddle pickup and knobs for volume and tone, giving you total control over your tonal output.
By 1961, at least, the makeover was complete. The old mini Les Paul, the J-1, was changed to become a sunburst double-cutaway solidbody. These had widely flaring equal cutaways, a single rectangular neck pickup, a large pickguard which covered most of the treble side, a wooden adjustable bridge, covered tailpiece, volume and tone. The bolt-on neck now had a more Gibson-style open-book head shape (with round logo sticker). The fingerboard had the old large dots with two small octave markers. The J-1, in a number of forms, would survive at least through 1966, if not longer. It is presumed that the J-2 was still around and that it had also become a double-cutaway; it most certainly was still in the catalog, as a double-cut, in ’62.
Naturally, it all comes down to manipulating the effect to fit the occasion. There is definitely such a thing as too much reverb or not enough. However, this is the type of thing you will have to figure out on case to case basis. With that said, you would be surprised at just how often reverb is used in music these days. Some sound engineers and producers like to be subtle to a point where you won’t notice the reverb unless you are actively looking for it. Others tend to go overboard in order to express themselves.
I have had an old beat-up non-functioning norma electric archtop (hollow body) since i was 13(in 1984). A friend gave it to me and said i could have it if i could fix it... well like 20 years later i fixed it! and had the electrical redone for like $60.00. it needed some new parts (basiclly EVERYTHING) but i really wanted an archtop and knew i could fix this one up to sound pretty cool.... what i have found out about these guitars is that they really arent worth anything... i thought this one may have been from the late 50's early 60's so i may be worth something.. but as it turns out most people i have talked to about restoring it says its not worth anything that they were just little copies made in the 50's-60's and bought in the US at probably sears or something.... oh well I DONT CARE i really like it and its made well, so for the sheer vintage look and great feel I LOVE IT!-jj
The SG Special by Epiphone is our hands down top pick. As you'll know by know, Epiphone is one of the best guitar manufactures in the business – so the quality of this guitar is absolutely amazing. Its epic red devilish double-cutaway design gives easy access to all 22 frets. It has a hard maple neck and a slim taper D-profile which ensures durability and rigidity. The fretboard is made of rosewood which makes it easy to learn to play. This guitar is all about that rock sound - it's equipped with two open-coil and noise-free humbucker pickups. The hardware is carved from nickel and is available in two dazzling finishes, cherry, and ebony.
Boost pedals increase the strength of your signal going in to your amplifier. This means you don’t have to use distortion to get that volume jump when you want to make the chorus or lead line jump out. A boost pedal increases the signal without adding distortion, and can be used to fatten up your sound, ‘pushing’ your amplifier harder and louder, just without the grit that a distortion pedal will add.
Replacing pickup rings and restoring covers. These rings are usually plastic and cannot be restored but covers are normally metal on Les Paul styles. You may not want to rub steel wool across your covers so follow the method of cleaning painted bridges to avoid unwanted scratches. Also, replace your pickup rings properly with rings that are the same length and/or color and make sure the screw holes do not need to be resized.
In some modern valve effects, the "dirty" or "gritty" tone is actually achieved not by high voltage, but by running the circuit at voltages that are too low for the circuit components, resulting in greater non-linearity and distortion. These designs are referred to as "starved plate" configurations, and result in an "amp death" sound.[citation needed]
hi-thanks joe -i have  installed a push pull pot to get middle and neck and all three pickups totegher-it works prefect but when not pulled it has seemed to change the sound on my normal five  selector sound and made all my normal five sounds very twangy-is this normal as when i pull the push pull pot up the extra sounds get clearer-is it becuase i have two tone caps on the push pull one on top half and one on the bottom but i thought that should not matter when the tone is at 10-thanks sean

The guitars included three bolt-neck Strat-style models, the GS-1 (one humbucker), GS-2 (two humbuckers) and GS-3 (humbucker/single/single). Most had locking Kahler vibratos, although at least one GS-3 has been seen with a traditional fulcrum vibrato. The bodies had a German carve relief beginning at the waist and extending forward to the cutaway horns. The necks had 21-fret rosewood or maple fingerboards with dots. The six-in-line heads were kind of squarish and bi-level, with a carved relief along the lower edge, kind of an Ovation trademark. The logos said Ovation Ultra GS. The GS-1 (volume only) and GS-2 (volume, tone, three-way) had pickups mounted on rings on the top. The GS-3 featured a black Strat-style pickguard. One source refers to a GSL model, but nothing is known about what this means, if it isn’t a typo. Most of these came with typical exposed-pole DiMarzios, but the previously mentioned guitar with the fulcrum vibrato also had twin-blade pickups with DiMarzio stenciled on the covers.
PRS scale length falls between Fender and Gibson at 25 inches. These are typically set-neck guitars, often with carved tops. This style is a nice alternative for players who are looking for a middle ground between the warmth and resonance of a Les Paul and the tighter feel of a Strat. You’ll also see a lot of guitars that have that PRS look but are built to a different scale length.
Gibson and Fender have been ripping the public off for years, they're not even close to being worth what they charge especially Fender with such a mass produced bolt on neck and lame finishes design. Carvin is a superior guitar in every way and what people fail to mention is that you can choose what wood and finish you would like as well as bolt on neck, set neck or neck through designs and their pick up's are impeccable. A truly great guitar co. With excellent customer relations and real musicians will all show respect for Carvin when mentioned if not already owning one.

You honestly could get a single multi-effects unit that will already have thousands of the most popular stompboxes built in, plug it into your PA or headphones, turn on one of the many built-in amp modelers, and you’re good to go. This is actually a solution that many touring musicians have gravitated towards, as it is so much easier to just carry around a single multi-effects unit compared to a pedalboard with several different pedals and a separate amp.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
Les Pauls are all about that heavy metal feel and heavy weight. When they were first introduced, they had two p-90 single coil pickups. Today, they use double humbucker pickups for outputting a thick, sustainable sound. Like Tele and Stratocasters, they have a single cutaway shape. Heavy rock musicians love Les Pauls. Fender offers an affordable range of Les Paul electric guitars compared to Gibson, but Epiphone by Gibson is a hot item for the beginners.
Fall 1954: both models have 2 volume and tone knobs, $39.95 and $59.95 respectively. The single cutaway bodies were made of solid Poplar wood, and are known as the "peanut" body shape at 11.25" wide. Then used a solid aluminum bar running from the peghead to the bridge for strength. "Coke bottle" pegheads are used that are 5/8" wider across the two "E" tuners than the later "Coke bottle" peghead shape. This model was also available under the Silvertone brand name with the "lightening bolt" peghead.
First off I need to mention that there is a category of effects I will call “overdrive” effects where descriptive labels often overlap so it can be confusing. They are essentially effects that simulate amplifier tubes being overdriven to create distortion. These type of effects are can be called: distortion or overdrive or fuzz or metal. And the label is usually based on the amount of gain they produce. 
One unique application of a fuzz pedal involves starving the pedal of voltage--which will produce a scratchy, velcro-like tone. This is desirable by some musicians because it is a highly unique sound and is often employed by more avant garde musicians. This sound can be achieved by purchasing a power supply with a sag output, or using a nearly dead battery, although the pedal won't last long when using that method.
New in ’64 were the TG-64 (named for the year) and a matching series of solid basses. The TG-64 was essentially a Fender Jazzmaster shape with a slightly extended bass horn, the new, hooked four-and-two headstock (usually with a metal plate on the front), and best of all, our old friend the “monkey grip” handle in the lower bass bout, handed down from the old T-60. The pickguard was two-part, with one large piece under the strings and a little extension on the lower bout for knobs and jack. These had three single-coil pickups, usually the chunky, metal-covered kind with a black insert and exposed poles, although some have smaller oval metal covers with exposed poles, all controlled by three on/off rocker switches above the strings. A small sliding switch served as a rhythm mute, or lead boost, depending on your point of view.
I started out doing pretty much what I do now on an acoustic and transferred it to electric when I was able to get a paper route and buy a crappy red electric guitar. I knew the value of working stripped down and I still do, although in this day and age I've made a lot of records with different sounds. I must say I really love what technology can afford you.
Good questions. Firstly, swapping the saddle around has the effect of moving the tapered top edge of the saddle closer to, or farther from (depending on which way it was to start with) the front of the bridge. If you're wanting the string to be as long as possible, for example, you'd need to make sure the saddle is oriented in such a way that the tapered edge is at the tail end (farther from the pickups). If you look at my pictures above, you'll see that my D-string saddle is originally oriented in this way, but in my case I need to SHORTEN the string, so I rotate it and this gives me more forward adjustment. Since you need to do the opposite of me, you'd therefore need to make sure your saddle has the same orientation as what mine had BEFORE I changed it. I really hope that makes sense.
Some of the earliest electric guitars, amps-in-cases, pickups under the bridge, fiberglass guitars, built-in electronic vibratos. Sound curious enough for you? The subject of Supro guitars and amplifiers represents a profitable avenue for exploration by collectors and enthusiasts interested in the many curious and significant byways off the guitar superhighway, which can be enjoyed without having an oil sheik’s bankroll. While National resonator guitars have received superb attention by Bob Brozman, little has been written about this mysterious corner of the Valco universe. Well, with a little help from our friends (in particular, catalogs and invaluable information supplied by Mike Newton, Jim Dulfer, and Michael Lee Allen), let’s set the record straight.
This is an American brand of guitar that is available in India. It was created in the year 1873. After a few years, it was bought by Gibson Guitar Corporation. Epiphone has a compact non-cutaway body made entirely from laminated mahogany. The neck features smooth slim taper profile, fretboard made of rosewood and 20 frets. Epiphone guitars India price starts from 14,000 INR approximately. This is the brand of guitar that is nylon strung and offers highest standards in acoustic and electric guitars.
The first question you should ask yourself is: What type of music genre do I like that uses guitars? If you’re into metal, hard rock, or even alternative rock, selecting either one of those options is going to have an impact on the type of electric guitar you’ll buy in addition to the amp. Remember that one type of electric guitar and amp is going to work better or worse than another depending on the type of sound you want.
Chabot Guitars - Paul Chabot used to offer quality hand made Classical guitars (Colorado, USA) "Paul first apprenticed und er guitar maker / repairman Robert Buchanan, where he became familiar with the aspects of guitar repair, and guitar refinishing. Furthering his ability and knowledge, Paul attended Roberto-Venn School of Luthiery where he learned the basics of wood, instrument design and guitar making. Not long after graduating from Roberto-Venn, Paul was fortunate enough to apprentice under world renowned Master guitar maker Augustino Lo Prinzi. Through Augustino Lo Prinzi, Paul was able to learn some of the most proven methods and advanced techni ques of fine guitar making."
Description: Guitar Type: Acoustic - Body Size: Grand Concert - Top Wood: Solid Mahogany - Back: Solid Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Dovetail - Neck Construction: V-Shape - Fingerboard: Maple - Binding: Ivoroid - Frets: 20 - # of Strings: 6 - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge Construction: Maple - Hardware: Open Gear Tuner, Chrome - String Instrument Finish: Open Pore Natural
According to Michael Wright of Vintage Guitar magazine, Univox itself has a rather convoluted history. Though it was a part of the “lawsuit era” of the ‘70s, Univox wasn’t just another copy manufacturer out of Japan. It’s a bit more complicated than that. The firm was created from a joining of multiple companies that had a few other name brand guitars – Hagstrom, for one – under their corporate umbrellas.
I always say that Jose Feliciano? is indeed one of the greatest guitarists that’s ever lived. Flamenco, latin, bolero, classical, rock ect ect…. You name it and Jose can play it. Why he’s not on Rolling Stone’s 100 greatest guitarist of all time, is beyond anyone’s guess. dont believe me look up on youtube purple haze, the thrill is gone, flight of the bumble bee, Malagueña under Jose Feliciano. the guy can play anything and make it his own.

{ "thumbImageID": "Les-Paul-Studio-2018-Electric-Guitar-Vintage-Sunburst-Black-Pickguard/K35716000002001", "defaultDisplayName": "Gibson Les Paul Studio 2018 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Vintage Sunburst Black Pickguard", "sku": "sku:site51500000137386", "price": "1,649.00", "regularPrice": "1,649.00", "msrpPrice": "2,749.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Studio-2018-Electric-Guitar-Vintage-Sunburst-Black-Pickguard-1500000137386.gc", "skuImageId": "Les-Paul-Studio-2018-Electric-Guitar-Vintage-Sunburst-Black-Pickguard/K35716000002001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Smokehouse Burst Black Pickguard", "sku": "sku:site51500000137385", "price": "1,649.00", "regularPrice": "1,649.00", "msrpPrice": "2,749.00", "priceVisibility": "1", "skuUrl": "/Gibson/Les-Paul-Studio-2018-Electric-Guitar-Smokehouse-Burst-Black-Pickguard-1500000137385.gc", "skuImageId": "Les-Paul-Studio-2018-Electric-Guitar-Smokehouse-Burst-Black-Pickguard/K35716000001001", "brandName": "Gibson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }