Lets face it: when most folks first pick up the electric guitar, the only other gear they think they might need would be an amp, a pick, some cables and maybe some pedals if they are savvy. As these players become more experienced and move from their garage to live music venues and recording situations, they eventually run into some issues and realize there must be better ways to be heard than turning the amp to 11.
Either today or tomorrow my SSS Mexican Stratocaster will be arriving at my local Guitar Center and I'm not sure if I should pay to get it setup. The guy that worked there, Jon, suggested I get my guitar setup as soon as I go and pick it up since its 50% off for a first time setup. He said the technician would adjust the guitar strings, double check the action or height of the strings or something. It sounds like something I wouldn't really need but then again I'm just a beginner - maybe some of you more experienced guitarists can let me know if Jon was trying to do me a solid or if he was just trying to make a sale. He also said they'd help me get my guitar in tune which was pretty cool.
Package arrived in a timely manner and in good shape. Guitar is alright, built to look like a high-end model but closer inspection proves otherwise. I was fine with that but then had to remove the rear cover of the amp to reconnect a power wire that had become disconnected during shipping just to get power to the amp. After that I still had no sound through the amplifier. I checked the amp and cable with another guitar and all worked fine. That lead me to replace the guitar battery that came with the unit with a brand new one and the problem still persisted. After destringing the instrument and checking the interior connections I am convinced that the issue is in the pickup under the bridge or in the onboard electronics. Hopefully the replacement will work better but buyers should be cautious when ordering this product. The guitar really is beautiful for the price but certain quality control issues leave me wondering, especially once the Amazon product support expires on it.
Trim:  Heel cap: ebony. Fingerboard: ebony bound in white celluloid with scalloped lower end; 24 frets under A and D, 21 nickel-silver frets under G and C; single abalone dots behind 5th, 7th, 9th, 10th (slightly larger), and 15th frets; double mother-of-pearl dots behind 12th fret. Nut: bone. Bridge: mahogany capped with ebony; nickel-silver-plated steel screws to adjust bridge height and pickup contact. Tuners: six nickel-plated steel, worm-gear machine tuners by Grover with convex head surfaces and decoratively cut plate outline. Endpin: black bakelite; extends through tailpiece. Pick guard: imitation tortoise shell plastic raised on wood brace affixed to top with two steel dome-headed screws. Lacquer: dark orange-brown sunburst.
With so many guitar manufacturers hot rodding the Stratocaster, it is refreshing to see brands like ESP going after the other popular guitar shape, resulting in the "Super LP" guitar like the ESPT LTD EC-1000FM. This souped up version of the classic single cutaway body combines traditional looks with modern tones and playability, resulting in a fast playing axe that's easy on the eyes, and not too edgy.

On the way folks arriving soon stay tuned pics of this made in Japan hand crafted beautiful Exotic Vintage Martin copy will be uploaded soon ... in great players condition original and stock Takamine pickup installed you can plug in at the strap pin jack and go electric and sounds amazing or fully acoustic of course unpluged. You know theses are know for the ultimate beauty of them as well as the Rich complex tone they offer well seasoned instrument of this caliber Japan had to offer in the Lawsuit series days 70-85 or so that have been discontinued decades ago as they say they don't make um like this any more... Stay tuned for another exotic Brazilian Rosewood guitar at JVGuitars.com any questions for Joe email: jvguitars@gmail.com.
Rickenbacker continued to specialize in steel guitars well into the 1950s, but with the rock and roll boom they shifted towards producing standard guitars, both acoustic and electric. In 1956, Rickenbacker introduced two instruments with the “neck through body” construction that was to become a standard feature of many of the company’s products, including the Combo 400 guitar, the model 4000 bass, and, later, the 600 series.
Martin flat top guitars were made in various sizes. The bigger the guitar body, the better and more collectible the guitar. This is why guitar body size is so important to identify on a Martin flat top guitar. Starting in October 1930, Martin stamped the guitar body size right above the serial number inside the guitar. This makes identifying body size on October 1930 and later guitar very easy. For flat top guitars made before October 1930, the easiest way to figure out the body size is to use the flat top guitar body size chart below. Body sizes, pretty much from smallest to biggest, include O, OO, OOO, OM, D.
This may seem like an odd value to consider, but most guitarists need to feel a certain connection to their instrument. It’s part of what makes being a guitarist different from other types of musicians; a sense of individuality as well as style. Your guitar will be a significant investment regardless of which brand you settle on, and while sound and construction are more critical factors overall, it’s important that your instrument inspires you. Different brands are known for cultivating different images; Gibson’s and Fender’s were made famous by the rock gods of yesterday, while Taylor’s unique acoustic bodies will conjure up a different vibe for a folk player. Again, this aspect speaks to your individual needs as a guitarist.
The brand’s biggest boom through the fifties and sixties was largely down to the birth of rock n’ roll. Thanks to their excellent hollow and semi-hollow models, Gretsch guitars were used by icons including Chuck Berry, Chet Atkins, Bo Diddley, and George Harrison. Since 2002 the production side of things has been run by Fender, although the Gretsch family still own the company.
In 1992, two more models were added, the single-cutaway BC-40 and the 5-string B-540. Although widely admired[who?] for their high quality and lovely appointments, they proved to have limited appeal due to their $2000-plus list prices. By 1997, all four of these initial basses were dropped in favor of the B-1, a lower-priced ABG with laminated mahogany sides as part of Martin’s 1 series of guitars. The BM, an even less expensive model in Martin’s now discontinued Road series soon followed; it had laminated mahogany sides with a solid mahogany back. Also around this time electronics became standard on Martin basses. The most recent additions are the BC-15, a single-cutaway version with a mahogany top, the BC-16GTE, also a single-cutaway with solid Genuine mahogany back and sides with a gloss top, and the 00C-16GTAE, which is a slimmer thin-line version of the previously mentioned model. As a special edition, Martin offered the Alternative X Bass with jet black High Pressure Laminate back and sides and a Graffiti-patterned Aluminum finish top. This bass was very similar in build to the other guitars in Martin’s X series. There have been two Limited Edition Martin acoustic bass models. The first, the SWB Sting Signature Model, was released in 1999 and was made with woods certified by the Rainforest Alliance’s SmartWood program[citation needed]. The SWB’s top is made with book matched solid Sitka spruce reclaimed from pulp logs, the back, sides and neck are solid certified cherry, and the fingerboard is certified katalox. Sting’s signature is inlaid between the 18th and 19th frets, and a label inside the body states that a portion of the sale price is donated to the Rainforest Foundation International[citation needed]. The second and more recent Limited Edition is the B-28KV Klaus Voormann Signature model released in 2008 for the German market. It has a Sitka spruce top with Solid East Indian Rosewood back and sides and a black Ebony fingerboard. The headstock features a unique art design by Klaus as a circular inlay making each bass a one-of-a-kind. In addition to these U.S.-made instruments, Martin also markets Sigma ABGs made in Korea.
This truly is a pleasure writing about the best kept secret in the guitar world. The G&L Legacy Tribute. I own a USA Hamer Gold Top Archtop Standard with P-90's and it's stupendous guitar. But like all Les Pauls and high quality Mahoganies, it has a growl suited for certain kinds of Rock N Roll. However, there is another voice in my guitar arsenal and I only have one other. The G&L Legacy Tribute. This guitar can cover the other half. I bought this used for $299 and four years later I still can't put it down. So I have a $2600 guitar and a $299 guitar and love them equally. What does that tell you about the Legacy Tribute?
The first recording of an electric guitar west of the Mississippi was in Dallas, in September 1935, during a session with Roy Newman and His Boys, an early Western swing dance band. Their guitarist, Jim Boyd, used his electrically-amplified guitar during the recording of three songs, Hot Dog Stomp, Shine On, Harvest Moon, and Corrine, Corrina.. An even earlier Chicago recording of an electrically amplified lap steel guitar was during a series of sessions by Milton Brown and His Brownies (another early Western swing band) that took place January 27-28, 1935, when Bob Dunn played his amplified Hawaiian guitar.
Blend potentiometers are a popular modification to instruments with separate volume controls for pickups, no master volume and/or no pickup selector. For instance, on the Fender Jazz Bass, the dual volume controls can be replaced with blend and master volume controls, to allow the instrument's output level to be adjusted with just one knob while still retaining the various combinations of the two pickups blended together.
Flanging is the strongest of the standard modulation effects. The feedback control increases the depth of the 'comb filtering' produced when a delayed signal is added back to itself. Because it is such a distinctive effect, it is best used sparingly, though it can also be used to process a reverb send to add a more subtle complexity to the reverbed sound.

{"eVar4":"outlet: guitars","eVar5":"outlet: guitars: electric guitars","pageName":"[gc] outlet: guitars: electric guitars: ibanez","reportSuiteIds":"guitarcenterprod","eVar3":"outlet","prop2":"[gc] outlet: guitars: electric guitars","prop1":"[gc] outlet: guitars","evar51":"default: united states","prop10":"category","prop11":"extended range electric guitars","prop5":"[gc] outlet: guitars: electric guitars","prop6":"[gc] outlet: guitars: electric guitars","prop3":"[gc] outlet: guitars: electric guitars","prop4":"[gc] outlet: guitars: electric guitars","channel":"[gc] outlet","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] outlet"}
PRS started off in the 1990s. At that time, it seemed Les Pauls were being swapped in favor of a PRS guitar. PRS leveraged this opportunity to continue the trend, making PRS more accessible to all. Hence, they launched another line of product with affordable price tags – the SE guitars. Nonetheless, one cannot consider SE guitars as the beginner’s guitars, since they all flaunt with high-end specs like other instruments. Through these guitars, one gets an opportunity to enjoy playing a pro guitar without causing a blow to your budget.

There are tons of different online retailers and ebay stores that you can find a great deal on parts and supplies, but those were just some of the ones that I have purchased on and been satisfied with their service and parts. NOTE: Do your research when it comes to parts and the quality of the parts you buy. I like to get feedback and reviews from Harmony-Central. You might not be able to get reviews on everything, but it helps you out allot.
Nylon strings are essential for any classical instrument, and if you are planning to play classical music or Latin styles such as flamenco, a nylon string guitar is the way to go. Steel strings are more appropriate for rock, pop, blues, and pretty much everything else that doesn’t fall under the classic umbrella. You can check out our article on the best classical guitars for beginners.
I just thought you'd like to know that Takamine produced for other names. I've just bought a 1973 Wayne which has a Takamine label inside stating it was made for Wayne. Its a Takamine 375 thats a Martin D35 copy. Wayne were guitar makers in Melbourne Australia in the 1950s and 60s and began importing under their name briefly in the 70s. It sounds amazing.
There are several aspects that make the acoustic guitar different from the electric one. The most notable difference is the fact that the acoustic types do not need a source of electricity or rather they do not have to be plugged in for them to be heard. They are relatively large and are built with a hollow chamber for the magnification of the guitar’s resonance thus giving out sound that originates from the plucked strings. It also has a bridge that is essential for the transmission of vibration of the strings to the body. They are self contained, needing minimal preparation to play. In other words, they are the guitars to be bought by all those looking for simplicity.
If you’re looking for a decent guitar at a super affordable price, look no further. This Ibanez features Powersound Pickups as well as 5-way switching to give you a variety of tones and styles. With a contoured body, it’s super easy to get comfortable while shredding away on this puppy. If your music styles fall in line with hard rock or country, then this is the guitar for you!


Categories: Gibson Guitar CorporationBanjo manufacturing companiesBass guitar manufacturing companiesGuitar amplifier manufacturersAmerican companies established in 1902Manufacturing companies established in 19021902 establishments in MichiganCompanies based in Kalamazoo, MichiganManufacturing companies based in Michigan1902 in musicCompanies that filed for Chapter 11 bankruptcy in 2018

Neither should you confuse acoustic-electric guitars with semi-acoustic hollow or semi-hollow instruments. Acoustic-electrics are acoustic guitars with onboard electronics that allows them to be amplified. They can be played just as well without plugging in. Semi-acoustics are electric guitars with some acoustic properties that are meant to be amplified when played.
I remember choosing a floating tremolo equipped electric guitar as my first ever purchase, and I ended up being so frustrated at how hard it is to keep the guitar in tune and how complex string replacements were. To make the long story short, I felt relief when I traded it up for a simpler Fender Strat. These days, floating tremolos have gotten better and easier to setup, but I'd still recommend a guitar with basic stop tail piece or tremolo bridge for beginners - just so you can focus on learning the instrument and worrying about string setup when you have more experience.
This 248 page book is part of a series of similar volumes, including The Guitar Grimoire: A Compendium of Formulas for Guitar Scales and Modes, The Guitar Grimoire: Progressions & Improvisation, The Guitar Grimoire: A Compendium of Guitar Chords and Voicings, and so on. You get the idea. Master a few of these and you’re going to to be in excellent shape.
We round off this list with a relatively modern innovation in the world of acoustic guitars; the ‘baby’ acoustic. As usual, Martin and Taylor have led the way with these particular guitars, which are effectively shrunken down dreadnoughts which focus heavily on their portability and the wide range of musical scenarios in which they can be used. Martin had dabbled in this world before, with its rather odd looking Backpacker, but it was with the LX1 – and Taylor’s subsequent Baby Taylor – that the world began to take note.
I have been playing guitar for over 40 years and purchased Taylor's, Gibsons and Fenders as well as many others. This Godin company understands value and passes that along to its customers. Fine tone when played acoustic or threw an amp. The wood tone and workmanship are awesome for this or any price point. You will not be disappointed with this guitar, it is a great value.
Across the United States, there are increasing concerns from businesses about the supply of science, technology, engineering, and mathematics trained workers. Although science and math test scores in the US are among the lowest around the world, the US educational system is in the process of revitalizing the “hands on” learning techniques as a way to enhance the participation and success of students. Our project meets the needs of applied learning with the flexibility of being modular in the classroom.

But older guitars are not always better than new guitars; they can have unreliable parts, or be difficult to maintain. A lot of these are upgraded to make great players grade instruments. Keeping the essence of the original vintage guitar, but adding a little of today's reliability. A great example is the 1960s Gibson Melody Maker; an all-mahogany set neck guitar with Brazilian rosewood fingerboard and beautiful nitrocellulose finish. Well-built by Gibson, in their Kalamazoo factory, but with very basic pickups, tuning keys and electronics. Upgraded examples are everywhere, and are exceptional value as players grade instruments. Then again some guitars, especially early Japanese and European models aimed at the student guitarists of the early 1960s are completely unplayable. Even the cheapest modern day guitars put these to shame. Before buying any vintage guitar it is a good idea to know exactly what you are buying!
We spent 45 hours on research, videography, and editing, to review the top choices for this wiki. One of the best things about an electric guitar is its portability. Most times, however, you can't say that about the amps you need to go along with them. Fortunately, these mini amplifiers have come along, developed by the top names in full-size models, and offer incredible sound quality in an exceedingly portable package. We've ranked these micro monsters by tonal character, power, and control. When users buy our independently chosen editorial picks, we may earn commissions to support our work. Skip to the best mini guitar amplifier on Amazon.
Scott Baxendale has been building custom hand made guitars since 1974. Recently he settled in Athens Georgia where he is currently building custom guitars, restoring vintage guitars and teaching the art of lutherie to aspiring craftsman. Scott Baxendale’s legacy of building custom instruments began in 1974, when he arrived in Winfield, Kansas to work for […]
Since 1946, the P-90 has been pleasing guitarists with its vintage-soaked tone, that shares qualities of both single-coil pickups and humbuckers. P-90s are primarily single-coil in their construction (although larger and flatter), and come in a range of different housings. Although they feature a relatively low output, they provide a meatier tone than a single-coil, but with a bit more sparkle than a humbucker, and are therefore very versatile. They have been put to great use in rock, blues and jazz music, with Pete Townshend, Tony Iommi, and Carlos Santana all taking advantage of the sweet P-90 tone. On our chart above, the Seymour Duncan Antiquity is a great example, but check out more P-90 highlights on the dedicated page.
A steel-string guitar tuned to concert pitch endures a tension of about 180 pounds (800 N) on the top of the guitar from the strings[citation needed]. The X-bracing system has been shown to be an efficient technique for preventing the top of the guitar from warping under this force. The braces are generally carved, scalloped and tuned to improve resonance and integrity of the guitar top, such capability being performed by skilled artisans and not readily reproducible by machine[citation needed]. This work is an important factor in determining the timbre of the guitar and a major determinant in the observation that rarely do two guitars ever sound alike, even though they are ostensibly identical in construction.

One thing is for sure: the advantage of a multi effects pedal is getting a lot of effects in one convenient package, which you can use to learn what guitar effects you actually use on a regular basis. Depending on the type of music you play, your style, and your skill level, chances are you don’t have a need for every effect type under the sun. Pro guitarists’ pedalboards are tailored to the tone and sound they need to achieve. Perhaps fuzz, delay, and compression are crucial, but not a flanger or chorus. Point is, if you don’t yet know this about yourself, a multi-effects pedal is the most perfect and cost effective way to start. Over time, if and when your love for effects deepens, as your budget allows you can start buying individual pedals that are better versions of what’s on your multi-fx unit. The overdrive in your Zoom G3X might be good enough to hold you over, but eventually you might want to get an actual Ibanez TS9 Tube Screamer.
One of the most popular and widespread pickups in history is the single-coil, played by more legends than we can count – from Jimi Hendrix and Eric Johnson, to Jeff Beck and Yngwie Malmsteen. Renowned for their delightfully bright and clear tone, the single-coil is exactly as the name describes – a single set of magnetic pole-pieces, wrapped in a thin wire coil. Simple in design, but complex in their sound, with exceptional dynamics, sparkling highs, and huge twang. They are great for all styles of music, from classic rock to country. Generally found on all kinds of models from a huge range of brands, single-coils are famously the exclusive pickup on both Fender Stratocasters and Telecasters. The DiMarzio DP419 Area 67 is a good example of a great single-coil pickup and a must for Hendrix fans, although check our dedicated single-coil category for more.
Although there are now several digital guitar recording preamps which model amps and cabs, the Roland VG88's split pickup system allows you also to experiment with modelled guitars and pickups.Digital noise removal plug-ins (again best used before delay effects are added), produce even fewer side-effects and so may be the best option when recording into a computer-based system. However, you can often achieve a worthwhile improvement using simple low-pass filters — before I moved over to working almost exclusively on the computer, I often used the side-chain high-cut filter in my Drawmer DS201 gate to remove hiss from guitar tracks. The sharper the filter, the less the wanted sound will be affected, so a plug-in with an 18 or even 24dB/octave slope should be even more effective than the 12dB/octave filters the Drawmer uses. The trick when setting them up is to pick the lowest shelving frequency that doesn't materially change the original sound, other than to take the edge off the hiss. Using filters in this way also helps reduce finger noise and squeaking on acoustic guitar parts and can even help disguise moderate clipping distortion caused by recording at too high a level.

We consider the finest tonewoods to be those with superior projection and sustain, and without weak or bright spots within the tonal range. Many of the wood species from the US Pacific NW meet this criteria, and more. Some were well known by luthiers, but others, like Myrtlewood, Claro, Franquette & Bastogne Walnut, Port Orford Cedar, Redwood, Pistachio, Olive, Osage Orange and Douglas Fir are just now gaining notoriety.


First introduced as a 35th Anniversary Edition Guitar in 2009, it joined Taylor’s standard line up as a Specialty Model in 2010. The Baritone model features a Grand Symphony body and a longer 27-inch scale length which enables it to be tuned from B to B while maintaining normal string tension. It comes in either 6-string or 8-string option. The 8-string models incorporates a pair of octave strings that double the 3rd and 4th (D and A) strings. Solid wood back and sides available for the Baritone model are Tropical mahogany or Indian Rosewood with rosewood binding and an abalone rosette.
Harmonizers – Commonly used for vocal harmonies, these pedals can do a lot to beef up your sound. You can also use them in creative ways, like Steve Vai and Robert Fripp, who have been known to disable the main signal altogether so that their music is coming only from the pitch-shifted output. Using a modern harmonizer can be as easy as setting it to the key you’re playing in, and many even support more than one harmony at once.
I work out of my home shop in Idaho Falls, Idaho.  I do repairs for clients and guitar shops all over the United States.  I’d love to help you repair or restore your guitar.  Repair prices are based on a rate of $60 per hour.  These prices apply to guitars in otherwise good working order.  Your repair may vary depending on the condition of your guitar and the specifics of the work needed. Please contact me using the contact page if you have a repair that you would like to discuss.  Consultations are always free.

The Yeah Yeah Yeahs’ theatrically coiffed guitarist has several grueling jobs, among them holding down the trio’s entire melodic structure and holding his own against one of the most dynamic frontwomen of our time. His signature see-saw call-and-response lines leave plenty of room for tension and release, war cries, and tears, and the kind of grand, clanging chords that’ll turpentine your ears clean.
This is our top pick for the best dreadnought guitar under $500. It has the looks of something you’d see in a honky tonk bar. It is a really cool looking acoustic guitar. It is a classic with it’s sunburst color and decorated hummingbird pick guard. It is the more affordable version of the Gibson Hummingbird. It has a solid spruce top with mahogany back and sides. It also has a pickup so you can amplify it for gigs. Owners describe it as having a big sound with great playability. Nice low action will make playing much easier. The tapered neck is great for beginners and makes forming chords less difficult. See more pictures of this guitar here.
{"eVar4":"shop: accessories","eVar5":"shop: accessories: strings","pageName":"[gc] shop: accessories: strings: guitar strings","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: accessories: strings","prop1":"[gc] shop: accessories","evar51":"default: united states","prop10":"category","prop11":"acoustic guitar strings","eVar18":"03e64461-af2b-4a48-8533-e7748b0554d2","prop5":"[gc] shop: accessories: strings: guitar strings","prop6":"[gc] shop: accessories: strings: guitar strings","prop3":"[gc] shop: accessories: strings: guitar strings","prop4":"[gc] shop: accessories: strings: guitar strings","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] sub category2"}
By the early ’80s, MTI was importing Westone guitars from Matsumoku, which had made its earlier Univox guitars (and the competitive Westbury guitars offered by Unicord). Wes-tone guitars continued to be distributed by MTI until ’84, when St. Louis Music, now a partner in the Matsumoku operation, took over the brand name and phased out its older Electra brand (also made by Matsumoku) in favor of Electra-Westone and then Westone. But that’s another story…
E-B-E-G#-B-E (use light gauge strings because three strings must be raised) Open E is used by: Brian Jones on "No Expectations", "I Wanna Be Your Man"; Keith Richards on "Salt of the Earth", "Prodigal Son", "Gimme Shelter", "Jigsaw Puzzle", "Jumpin' Jack Flash", "You Can't Always Get What You Want" and by Bob Dylan on his 1975 album Blood on the Tracks. By Hoobastank on their first and second albums, and by Junior Campbell on The Marmalade recordings Reflections of My Life and I See The Rain Used by Johnny Marr of the Smiths on "The Headmaster Ritual".
I have owned Fender amps and Line 6 amps and while they have been "ok" amps, none of them come close to my newly acquired Mesa Mark V 90watt and 4� - 12 rectifier cab. Amp is super versitile and the time is out of this world. I knew I'd hit the jackpot the first time I plugged up to one. Mark V pairs nicely with my variety of guitars including PRS Holcomb sig, Fender Tele and Strat, Schecter Hellraiser, and Epiphone Les Paul. There's a tone in there for everyone, every guitar and every style of music... you just have to be willing to sit down and get to know the amp. Mesa Boogie is definitely the brand for me so I cast my vote in with them. Great company with quality amps and super friendly/helpful custom service.
{ "thumbImageID": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "defaultDisplayName": "Ibanez V70CE Acoustic-Electric Cutaway Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Violin Sunburst", "sku": "sku:site51418660054264", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "299.99", "priceVisibility": "1", "skuUrl": "/Ibanez/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst-1418660054264.gc", "skuImageId": "V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/V70CE-Acoustic-Electric-Cutaway-Guitar-Violin-Sunburst/J18814000002000-00-60x60.jpg", "imgAlt": "" } ] }
Arch top body 16" wide across the top, carved spruce top, back not carved by arched by braces, rosewood back and sides, f-holes, style 45 backstripe, bound ebony fingerboard, 2 white/black/while lines inlaid down length of fingerboard at the edges, abalone hexagonal fingerboard inlays on 8 frets (a few make with pearloid), vertical "Martin" pearl peghead logo, gold plated parts, sunburst top finish.
This may be the most important piece of equipment you will buy if you are a beginner in terms of learning leads or just learning how to layer multiple guitars into a single song. There are certainly better boxes out there but not at this price point. The looper alone makes it worth the cost, especially since it allows you to layer on drums, basic guitar part and then leads or harmonies. Or all of the above. The only real shortcoming is the 30-second limit on the looper. But that's more than enough room to lay down a chord progression against which you can practice your leads.
Although not as dominating in amp modeling, Guitar Rig takes the top spot in our guitar effects software list. It leads the pack with its meticulously detailed effects modeling. Its 54 modeled effects closely follow the behavior of legendary stompboxes and studio racks. Even professionals are having a hard time picking out the real pedal against this guitar effect software in a blind test. Its versatile design allows you to chain effects together in virtually any manner, without the hassles of cables, space and budget constraints. It is truly a truck load of gear in one software package. Retail Price: $199.00
After you have good coverage, let it dry for a few days or until it has hardened up enough. Inspect the surface for and runs or imperfections. If there are any runs them you can wet sand them flat with 800 grit wet sand paper and a sanding block. Usualy you will be able to see if there is any grain showing that you might not have filled up when you preped the body. If there is them apply a few more coats to cover it up and wet sand it to make it level.
Perhaps our favorite feature is a far more subtle aspect of this pedal's interior, which is a circuit design that runs your dry signal through an analog path, before reuniting it with the wet reverb signal, which is produced by a digital processor. This means your guitar's signal coming into the pedal is unimpaired by the digital components, giving you a far more pure and organic-sounding output. 

I've been playing guitar for several years now so I have played a wide variety of instruments. Of course bigger companies such as Martin or Taylor are going to be higher up in the ratings because they produce very expensive guitars and their name has been widely spread. My first ever Yamaha six string, which after three years is still my favorite guitar, is amazing. Its deep and rich tones makes it a blast to play. I can find myself playing any genre for hours because of how reliable and durable it is. They are very well priced for there quality and I would label Yamaha as being the working mans guitar.


Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.
As you'd expect, the most important decision to make with multi effects pedals is the choice of which effects, specifically, you want in them. The Electro-Harmonix Epitome Multi-Effects Guitar Pedal, for instance, is a veritable buffet of effects including flanger, chorus, reverb, pitch-shifting and more. But if you're looking for an expression pedal, you'll probably be more interested in a unit like the Vox StompLab IIG Modeling Guitar Effect Processor, which has one of those built in. Both of these multi effects pedals are top sellers, which comes as no surprise considering the versatility they bring to the table.
You've Changed.  Yep, you still LOVE your guitar, but man, you are now playing through a sweeet pedal board and amp that has way more gain than you could ever use.  The days of plugging straight into a Twin Reverb and trying to bully her into distortion is (thankfully) long gone.  Plus, you're older and wiser now, you no longer judge a pickup's value simply in it's output level ... you have now acquired a taste for true tone.  You want rich complex harmonics and touch sensitivity.  Face it, those EMG's did what needed to be done in 1991, but it's time to move on! 
Fretwire can vary from some makers as it is shaped by extrusion thru a series of roller dies and the dies wear.  I have observed actual Dunlop 6105 in my shop varying from .088” to .090” wide and from .052” to .055” tall.  Due to the inconsistent size and tang formation, I generally do not use Dunlop fretwire these days, instead preferring the more accurate German made Jescar or the Japanese made Stewart McDonald fretwires.  Both Jescar and SM have very well formed tangs and barbs and are very consistent. I will refer to the Dunlop numbers below but only for very general description – always verify actual sizes!
000-28EC[10] and 000-28ECB: Two of the five “Eric Clapton” models. Same body size as the 000-15, but with the Martin short scale (24.9″). This artist signature model is constructed with higher-quality woods (especially the more expensive 000-28ECB constructed from Brazilian Rosewood, hence the “B”), a different shape to the neck, and more ornamentation around the edge of the body.
And that's a wrap. If you're new to the pedal game, don't let anyone tell you that there are no rules. There are some very strict rules that apply if you want to sound professional, and these rules quickly reduce the amount of options down to very few, indeed. The honest and realistic among us will tell you the truth that there is a very firm effects pedal order you should connect your pedals in that you don't want to stray from unless you want to ruin your tone and appear to not know what you're doing. Guitar pedal order matters!
This guitar was first introduced in 2014, and has since been one of their more popular acoustics - thanks to its USA hand-crafted quality which you can own for a relatively accessible cost. The guitar is built using North American tonewoods that include solid walnut back and sides, along with a solid Sitka spruce for the top. This configuration, along with Gibson's premium build quality results in a balanced and full sounding acoustic voice, that elegantly matches the vibe of the instrument.
Fender guitars are the most popular and are considered as one of the best brands in the world. Fender guitar is manufactured by the Fender Musical Instruments Corporation of Scottsdale, Arizona. They are specialized in making stringed instruments and are best in making the solid body electric bass guitars. Fender Musical Instruments Corporation was incorporated in the year 1946 and is a relatively new company, but with the quality of products they make and the success they achieved, Fender is easily the best guitar manufacturer in the world.

This site is for information only - we don't sell vintage guitars - but do check out our Vintage guitar collectors pick list: a regularly updated selection of rare guitars, vintage catalogs, or unusual items currently that we've found for sale on the web. We especially like to feature Vintage guitars with a story! If you're selling something interesting yourself, get in contact and we can help promote your item.


hi-thanks joe -i have  installed a push pull pot to get middle and neck and all three pickups totegher-it works prefect but when not pulled it has seemed to change the sound on my normal five  selector sound and made all my normal five sounds very twangy-is this normal as when i pull the push pull pot up the extra sounds get clearer-is it becuase i have two tone caps on the push pull one on top half and one on the bottom but i thought that should not matter when the tone is at 10-thanks sean
Johnny was a strange case, a rock and roll outsider who was obsessed with uniformity. And that obsession helped forge the Ramones aesthetic: the identikit leather jackets and ripped jeans worn by each band member, the single surname shared by all four (in the absence of any actual familial kinship) and the terse pacing of the music itself, with not a single excessive note or lyrical utterance.
While you can play one through an electric guitar amp, an acoustic guitar will sound its best if it is played through a dedicated acoustic amplifier. While similar in structure to electric guitar amps, acoustic amps are primarily designed to offer transparency. In other words, it strives to reproduce the tone of your acoustic guitar’s natural sound as closely as possible. Interestingly, they almost exclusively come in a combo format, while most acoustic amps will have two channels – one for the instrument and the other geared towards microphone use. The AER Compact 60 represents what a great acoustic guitar amp looks and sounds like, with enough power for stage use as well as a high-end organic tone.
Keep focused on one goal at a time. For example, you could spend a week or two really getting to know 5 chords (why 5? Just pick a realistic number for that window of time and go with it!). Then, in the next week or two, practice changing between those chords using different combinations. In the next week, work on your strumming or picking, using the chords and chord change combinations you've learned.
However much you swap your guitar’s pickups, strings, and wiring configuration, tweak your amp, or revamp your pedalboard, you will never achieve the golden tone that rings in your head if you don’t take one tip to heart: it all starts with the wood. Sure, these are electric guitars, and all the electronic components in the sound chain will affect what comes out of the speaker, but they are acoustic machines first and foremost. Hit the strings with your guitar unplugged, and it still rings and resonates, and the sound you hear—even with no electronic devices attached—still defines the core of your tone. And to make sure this is the right tone for you, or to avoid fighting a tone with endless component tweaks that never seem to satisfy, you need to understand a little bit about how all that wood sounds.

A true guitar polymath, Nels Cline has tackled everything from gothic country rock with the Geraldine Fibbers to a full remake of John Coltrane's late improvisational masterwork, Interstellar Space. He's best known, of course, as Wilco's gangly guitar hero, lurching into extended seizures ("Spiders [Kidsmoke]") or spiraling into lyrical jam flights ("Impossible Germany"). "Nels can play anything," Jeff Tweedy said. "We struggle with his spot in the band sometimes – but we always come to a place that's unique and interesting because we did struggle."

The Korg Kaoss Pad is a small touchpad MIDI controller, sampler, and effects processor for audio and musical instruments, made by Korg. The Kaoss Pad's touchpad can be used to control its internal effects engine, which can be applied to a line-in signal or to samples recorded from the line-in. Effects types include pitch shifting, distortion, filtering, wah-wah, tremolo, flanging, delay, reverberation, auto-panning, gating, phasing, and ring modulation. The Kaoss Pad can also be used as a MIDI controller.

{"eVar4":"vintage: guitars","pageName":"[gc] vintage: guitars: alvarez","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[gc] vintage: guitars","prop6":"[gc] vintage: guitars","prop3":"[gc] vintage: guitars","prop4":"[gc] vintage: guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] vintage"}
The guitar is one of the most beloved musical instruments of all time. Guitarists tend to wear that title with pride, and their instrument becomes an extension of the player’s distinct personality. Because of this, players tend to develop a strict loyalty to the guitar brand of their choosing. Luckily, there are many great options out there today, with niches that cater to virtually all genres and styles. This guide will weigh the pros and cons of the five best guitar brands on the market, to help you make as informed a decision as possible on which brand will best suit your needs.
The downloadable section also offers some add-ons and upgrades for software you may already have, making it easy to bring it up to date. A few examples of available add-ons, both downloadable and packaged, include sound libraries, loops, refills, virtual instruments and effects plugins. These can open up new possibilities for music software that you already use regularly, allowing you to get more out of it. If you're a producer or studio engineer, take a look at the professional-grade sound workshop software like Avid Pro Tools, Steinberg Cubase, Ableton Live and Propellerhead Reason. You can also expand your tools into moviemaking to produce music videos with Sonic Reality Cinema Sessions and several other video editing options.

The difference between laminate and solid wood is that laminate is several thin sheets of wood glued together, while solid wood is a solid piece of wood. The glue that binds the pieces of laminate together reduces the amount that your guitar vibrates, which in turn lessens your volume and frequency production (tone). Solid wood resonates more efficiently, so instruments that use it are louder and sound better. On the flipside, laminated woods are cost effective, reliable and resilient to weather changes.


Yeah. The tremolo sound from the intro? That was four Fender Twin Reverbs. Myself controlling the speed of two of them and the producer controlling the speed of the other two. So two amps were recorded on one side of the stereo and the other two on the other side. I recorded the part on the tape without the tremolo, and then I sent the part from tape out to four amps, and he controlled two, and I controlled the other two.
Jimmie Vaughan: based on Jimmie’s own ’57 Stratocaster, the Jimmie Vaughan Tex-Mex Strat reflects his deep roots, traditional style, and preferred Strat features. Noteable for it’s alder body, 3 Fender Tex-Mex single-coil pickups, an extra-hot bridge pickup, a special tinted maple 1957-type V-shaped neck with maple fretboard and medium-jumbo frets, vintage machine heads, original Fender synchronized tremolo, and custom tone control wiring. Tone, tone and more tone.
This is a subsidiary guitar brand owned by Gibson. Epiphone makes the same models as Gibson - SGs, Les Pauls and what have you. The only real difference is the electrics, the circuitry, the wood and the finish, which to the normal eye/intermediate guitar player won't be able to tell apart from a Gibson. In fact, most of the musicians started out with an Epiphone because Gibsons are too expensive. John Lennon famously continued using Epiphone even after being able to buy Gibsons because he loved the imperfection of his Epiphone Casino.
I was a little concerned buying a guitar on Amazon. I had not even played a sample on the Gretsch acoustic. I've played Martins, Fenders, Washburns, etc. but never heard of the 'Gretsch'! It arrived within a few days of ordering with the case I ordered too. I had it delivered to my office so that it wouldn't be sitting on my porch until I got home. I opened the box to examine the guitar and co-workers asked me to play something. As I was tuning the white Gretsch I broke a string, so playing it for my friends was not going to happen. When I got home I re-stung the guitar and as I was tuning it I was not very impressed. I like the look but come on we purchase a guitar to play! After it was tuned I began to play a few chords and licks.
Laminate guitars are not made with solid pieces of wood. Instead, a laminate guitar is made with layered pieces of wood, like a veneer, to create the body of the guitar. Despite its reputation among music snobs, laminate guitars can be top-selling, high-performing instruments. Just check out the Fender CD-60CE Acoustic Electric Guitar for proof of a beautiful, all-laminate, highly-popular instrument!
Early proponents of the electric guitar on record include Alvino Rey (Phil Spitalney Orchestra), Les Paul (Fred Waring Orchestra), Danny Stewart (Andy Iona Orchestra), George Barnes (under many aliases), Eddie Durham, Lonnie Johnson, Floyd Smith, Big Bill Broonzy, T-Bone Walker, George Van Eps, Charlie Christian (Benny Goodman Orchestra), Tampa Red, Memphis Minnie, and Arthur Crudup. According to jazz historian James Lincoln Collier, Floyd Smith can be credited as the first person to rig up an amplified guitar. According to Collier, "Floyd's Guitar Blues" may be the first important use of the electric guitar on record.[17]
×