We will use the remaining pole to switch tone pots. Typical strat wiring has two tone controls – one for middle and one for neck pickup. We want to switch neck/middle tone control on when neck/middle pickup is on. To do this, common terminal of the second pole is connected to the common terminal on the first pole (pickup output) and neck and middle terminals of the second pole are connected to their respective pots. When neck pickup is on, the second pole will switch the output to the neck tone control as intended. What happens in position 4 (both neck and middle pickups on)? Both pots will be switched on and will be in parallel. Moving any tone pot would change the overall resistance to the tone cap and change the tone. The result is below:

Many bass players believe that tube amplifiers produce a "warmer" or more "natural" sound than solid state amplifiers when lightly or moderately driven, and more pleasing distortion characteristics when overdriven. Some performers also believe that tube amps have a greater level of perceived loudness for a given amount of amplifier power. Even though tube amplifiers produce more heat than solid state amplifiers, few manufacturers of tube amplifiers include cooling fans in the amplifiers' chassis. Usually adequate cooling is provided by passive convection. Adequate airflow is needed to prevent excessive heat from shortening the tubes' lifespan or producing tonal inconsistencies.[13] Tube amplifiers require more maintenance than solid state transistor amplifiers, such as replacing vacuum tubes or rectifying the tubes.
Combo amps come with a speaker built into the amplifier cabinet, making them heavier but more convenient. On the other hand, amp heads are lighter because they don't come with a speaker built-in. The amp head configuration allows you to freely choose the type of speaker and speaker cabinet that you prefer, with the complication of ensuring amp and speaker compatibility. Interestingly, there are now some amplifier heads that com come with built-in speakers that are only good for practice, making them technically a combo amp, but that's another story in itself.
The best guitars?  Look at what the best players use.  Certainly Gibson and Fender are in the mix, but these are typically priceless, early production or highly customized one-off units.  If you want something more or less off the shelf that is in the same range of build, tone and feel quality look at the following (BTW, you can't get these at Guitar Center, which is probably why they haven't been mentioned yet):
Return authorization must be approved. Returns accepted based on R and B approval of unique circumstances that have been reviewed and agreed between R and B and buyer. Buyer must contact R and B Vintage Guitars with-in 7 days. Buyer is responsible for shipping charges back to R and B. Return payments will be made after successful undamaged return of the item.

{ "name": "Brown", "skuUrl":"/accessories/el-dorado-vintage-hand-tooled-leather-guitar-strap/361014000008000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 155.00, "formatedIntegerValue": "155", "decimalValue": "00", "isOnSale": false, "msrp": 155.00, "salePrice": 155.00, "listPrice": 155.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","flexibleFinancing","guarantee","international"], "warranty": false, "freeWarrantyAvail": false, "sku": "site1sku361014000008000", "displaySku": "361014 000008000", "serialized": false, "stickerDisplayText":"Top Rated", "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/361014000008000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Vintage-Hand-Tooled-Leather-Guitar-Strap-Brown/361014000008000-00-140x140.jpg", "styleImgAlt": "Vintage Hand-Tooled Leather Guitar Strap Brown", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,240", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"82996536150", "restrictionType":"", "restrictionError":"" }
One of the oldest guitar effects, vibrato changes the pitch of the signal at a constant shifting rate. Vibrato adds motion to your tone, but without the “choppy” feel of a tremolo. Vibrato adds a more fluid movement. The slightly detuned, slightly chorus-ey modulation emphasizes bends and makes chords more interesting to the listener. Jimi Hendrix was a visionary user of the Uni-Vibe, which at its core is a vibrato pedal.
Nothing says rock and roll quite like an electric guitar—and whether you're just learning to play or you've been practicing for years, the right instrument can make you feel like a rock star. Selecting the right match for you is a matter of personal taste and playing style, but the broad selection available at Amazon.com can help you find the guitar and the accessories you're looking for.

Still not ready to give up, in ’87 Ovation contracted with a Korean manufacturer to bring in a Celebrity line of solidbody electrics. These were Strat-style guitars again, with bolt-on necks, pointy/droopy six-in-line headstocks (with a bi-level carved relief along the bottom, per style), two-octave rosewood fingerboards, triangular flag inlays, and a double-locking vibrato system. We’re not sure what the pickup brand was, but there are models with two XK-110 single-coils and one XK-120 humbucker, plastic-covered with no exposed poles.
The list of musicians who are (or who have been) in love with their vintage Fender Bassman amps—especially the 4x10 tweed variety made between 1957 and 1960—is pretty much endless. Just for starters (past and present), there's Eric Clapton, Buddy Guy, Mike Campbell, Mike Bloomfield, Jimmie Vaughan, John Fogerty, Josh Homme, Brian Setzer, the guy up the street from me... . Again, this is just the tip of the iceberg, people. After all, many professional music industry analysts have heralded Fifties 4×10 Bassman amps as the greatest amps—ever.
Bass amplifier equipment manufacturers include a variety of different types of companies, ranging from companies that only make individual components (e.g., Accugroove loudpeakers, a speaker manufacturer) to companies that only make bass amplifiers and loudspeakers (e.g., Gallien-Krueger). At the other end of the spectrum are companies that offer bass amplification equipment as part of a much broader offering of different types of instrument amplifiers and public address systems (e.g., Peavey, Carvin A&I or Yorkville Sound.)

After steel strings were the norm, rectangle bridges were still used on the lower end Martin models and smaller body models. Bridges don't last forever unfortunately, and the rectangle models are easy to reproduce. Hence here's some specs that may help you determine if a rectangle bridge is original. A Martin rectangle bridge should be 6" long and 1" (or slightly less) wide. The top of the bridge should have close to a 16" radius lengthwise. The tallest point of the bridge should be between the A & D strings, and the lowest at the high E string. The wing thickness is about .095".
Now, you have your first electric guitar and it’s set up nicely. The next thing you ask is “what is the best way to learn guitar?” And the answer is simple – get some lessons! Whether it’s from your local pro, guitar teacher, or from a range of excellent online courses, lessons will teach you the basics – allowing you to start playing songs within a couple of hours.
Before deciding on how to go about mic’ing the amp, listen to the sound in the room. If the guitar is being recorded as part of a rhythm track in the same room as drums and other instruments, the only option may be to use a close-mic’ing technique, unless you don’t mind dealing with the other instruments bleeding into the guitar track. Recording guitars in isolation, as an overdub, presents more options for ambient room mic’ing. Experiment with mic positioning to achieve the right amount of room sound and the desired bass and treble response. Distance-mic’ing in a very live-sounding room can create an appealing slapback echo-type sound, while close mic’ing gives you absolute flexibility in the mix.   
The first design was an Early Telecaster model, called Squier, with a single mic. The main contribution Leo Fender did, was the bode and neck removal separetly. In previous models, when the guitar need repairs, the complete instrument needed to be sent, while, after Leo fender design, the plate could be unscrew and sent to the shop only the damaged part.

The pickups are made with mismatched coils and Alnico magnets and are wax potted to eliminate the ear-splitting squeal during high-gain playing.  The pickups are independently routed through volume and tone controls and the 3-system toggle switch.  You can activate single coil pickups with the push-pull method found on each of the volume controls for coil splitting.
If you are an insurance agent, pawn store, a manufacturer or appraiser searching for used guitar prices and other musical equipment values, Used Price is for you. Our extensive database contains the value of thousands of pieces of used musical equipment. Whether you are looking for a Fender guitar value, a Gibson guitar value or a certain bass value or drum value, we have them for you all in one convenient location.
I have a almost identical one in front of me, but mine has 3 pickups. It has the same color white guard and sunburst pattern. The back of the guitar has the redish sunburst pattern on the neck like yours but also has the red on the main body, unlike yours that has a colored neck and solid color back. I can’t find a picture of a 3 pickup that is like this. Any info would be nice to know.
Some areas of the top’s lacquer finish have been peeled away from the long-ago removal of a few stickers and black electrical tape (the previous owner admitted to decorating the guitar with the black stripes in a tiger-theme). The guitar plays well, with a good neck angle and decent original frets. The guitar was just set up this past month by the pros at the renowned Guitar Factory in Orlando(http://www.guitarfactory.us/). It now plays great and needs nothing – they do great work! Pickups read 4.12 (neck) and 4.20 (bridge), and pots and switches work well. And, very important to note on vintage Gretsch guitars, there is NO binding rot. Also includes the Original Hard Shell Case.
Maintaining these items does help though, perhaps every year or so remove the cover plate or pickguard and clean out any dust building up on the switch and contacts, it'll make them last for years to come so it's worth the minimal effort. You'd perhaps clean the fretboard and frets, so it's worth thinking about the other, hidden, functional parts too. 
John McLaughlin was invited to record with Miles Davis while still in his twenties, co-parenting jazz fusion on Bitches Brew and other Davis LPs. But he achieved guitar-god status with his own Mahavishnu Orchestra, where he made his Gibson spit fire like a many-headed dragon. A breakneck stylist, McLaughlin was peerless, mixing psychedelic rock, R&B, gypsy jazz, flamenco and Indian raga techniques. That polyglot mastery earned him huge respect from jazz and rock peers alike: Jeff Beck called him "the best guitarist alive."

{ "thumbImageID": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White/K29653000001000", "defaultDisplayName": "Fender Mustang PJ Bass Pau Ferro Fingerboard", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Olympic White", "sku": "sku:site51500000055415", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White-1500000055415.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White/K29653000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Olympic-White/K29653000001000-00-60x60.jpg", "imgAlt": "" } , { "name": "Sonic Blue", "sku": "sku:site51500000055422", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Sonic-Blue-1500000055422.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Sonic-Blue/K29653000003000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Sonic-Blue/K29653000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Torino Red", "sku": "sku:site51500000055423", "price": "574.99", "regularPrice": "574.99", "msrpPrice": "575.01", "priceVisibility": "1", "skuUrl": "/Fender/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Torino-Red-1500000055423.gc", "skuImageId": "Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Torino-Red/K29653000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Mustang-PJ-Bass-Pau-Ferro-Fingerboard-Torino-Red/K29653000002000-00-60x60.jpg", "imgAlt": "" } ] }
Maple is a very hard type of wood with good tonal qualities and good sustain. Guitar necks are traditionally made from maple, in part because of its strength, and in part because the material can highlight and amplify the wood in the body. Maple is also often used as a top for the guitar body, partly because it is beautiful (think flame, or quilted maple tops), and partly because it can brighten a sound that would otherwise be murky.

Swan7 offers the best quality guitars for most musicians. Based in Brooklyn, New York, Swan7 provides superior quality musical instruments for the music lovers. They are specially recognized due to their durability, reliability, and affordability. Hence, no matter if you are looking for a budget-friendly choice, or are yearning to buy an expensive model, Swan7 will satisfy your thirst for the best guitar.
The fit and finish are as amazing as one would expect, and the general aesthetics of the guitars are just awesome to look at. They aren't gaudy or try-hard, but refined and subtle in their expression. Strumming a single cord will tell you all you need to know about the tone quality of this guitar, which is what really matters. It has that Martin twang and a lot of it.
When you start to look for that great beginner's electric guitar, focus on an instrument with good-quality wood and reasonable workmanship. That's the most commonly accepted method of choosing a low-cost electric guitar for a beginner. Guitar manufacturers tend to cut corners with cheaper guitars by using, for instance, cheaper pickups and hardware. But for the guitarist who gets more serious about playing, these are all upgradeable parts that can be swapped out for higher-quality parts. So begin with a good-quality wooden frame and upgrade as time and money allow.

Guitar technicians must be proficient in not only playing the guitar, but also in the construction of the instrument. They need to know how to repair and rebuild guitars from scratch as well as stringing and tuning the instruments. They need to understand how all the parts of the guitar interact to produce clear musical notes. This knowledge can be obtained through formal education, experience, working under a knowledgeable guitar tech or with other experienced musicians.


In 1952 the pickup selection circuit was modified by Fender to incorporate a real tone control. Between 1953 and 1967 the neck could be selected alone with a pre-set bassy sound and no tone control, in the middle switch the neck could be selected alone with the tone control and finally the bridge could be selected with the tone control. Although this provided the player with a proper tone control, this assembly did away with any sort of pickup combination. Eventually from late 1967 Fender again modified the circuit for the final time to give the Telecaster a more traditional twin pickup switching system: neck pickup alone with tone control in the first position, both pickups together with the tone control in the middle position and in the third position the bridge pickup alone with the tone control.[2]
The metal guitars that emerged in the 80's were simply geared towards people into metal, aesthetically geared that is, since all guitarists in every genre want guitars that are easy to play. Their main benefit was in introducing better tremolo systems - the locking nut and fine tuners on the trem so you didn't have to unlock the nut to make fine tuning adjustments. I had one on my Stratocaster, you could go nuts with the whammy bar and it would stay locked in tune.

Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
The Jackson JS22 Metallic guitar is a Dinky Blue guitar featuring a cut-away body type with solid body material. This solid body electric guitar is designed as a stage ammo metal for the serious and committed guitarists. The body of the Jackson JS22 is made of solid wood with basswood body finish, gloss orientation with right handed neck shape, with dinky neck consisting of maple wood.
For a guitar that sits comfortably in the mid-range segment of the market, Yamaha RevStar RS420 packs a decent punch. Body shape is more reminiscent of a PRS than anything else, but Yamaha definitely infused it with their unique details. The sound is tight, very flexible, and I had no issues dialing in the type of tone I was looking for. A well rounded model, that’s for sure.

Thanks for your note, Ed. I try and be terribly clear that there’s no notion of 1 being higher than another. They’re simply completely different, and it’s a matter of preference what you wish. Nothing I’ve ever denote has gotten additional attention than this, thus despite it in all probability being futile, i’m getting to build redo of this with video likewise.
No-load pots – also used by Fender, these pots have the clockwise lug disconnected from the resistive strip within, resulting in infinite resistance between the wiper and the other outer lug when turned fully clockwise. These are sometimes used as tone controls, to remove the load on the pickup(s) presented by the pot and the tone capacitor when turned to 10.[10]
On December 22, 1969, the Gibson parent company Chicago Musical Instruments was taken over by the South American brewing conglomerate ECL. Gibson remained under the control of CMI until 1974 when it became a subsidiary of Norlin Musical Instruments. Norlin Musical Instruments was a member of Norlin Industries which was named for ECL president Norton Stevens and CMI president Arnold Berlin. This began an era characterized by corporate mismanagement and decreasing product quality.

The functional attribute of this guitar is not the only factor that it gets credit for. The instrument comes with a neck & body binding together with trapezoid inlays that produce the classic looks that you would always love to display on stages. These are features that are truly amazing especially when you are under the stage lights doing a performance both during the day as well as at night. Such nice appearance will obviously give you more courage to keep on soldiering on with your ambitions of becoming a professional guitarist.
I can't have them above Guild. Their usa made stuff and vintage acoustics are gems no doubt, but they set 7 or 8th for me. I just wish they still made American made acoustics. Like guild they are a hallmark name in the acoustic guitar world. Unlike guild they aren't being made in america. Guild and their supporters really lucked out with the Cordoba purchase. They're bringing Guild back where they belong. On top. Now if someone would do the same for Washburn. I really thought the usa made stuff would get back to greatness with that solo deluxe warren haynes model, but they stopped American made guitars all together which is a shame.
The previous drawing illustrates the electrical and magnetic function of a single-coil pickup. Some pickups might use six permanent magnets in place of the six pole pieces to create the magnetic field, but the idea is the same: create a steady magnetic field around a coil in proximity to the guitar string. The name "single-coil" pickup becomes more significant when compared to the humbucker or "dual-coil" pickup.

The Effect: Metal has become the prevalent genre when it comes to music that involves guitars. Dialing in a proper distortion can make or break the sound of your guitar as well as your entire band. Coincidentally, it’s so easy to go overboard with distortion, all while being certain you are on the right track. The very first step is to get a dist box that is suitable for metal. Something like Electro­Harmonix Metal Muff carries just enough punch to get the job done, but not enough to drown your tone completely with gain. You’ll find this to be a reoccurring theme with a number of great metal dist boxes. At the end of the day, it all comes down to your prowess and skill. Every good metal guitarist know that it’s all about the unity of equipment and knowledge. With that said, these pedals will get you started.
• How to check frets: The easiest and quickest way to make sure a guitar’s frets are in good shape is to look straight down the neck of a guitar, from body to headstock. If the frets are at different heights (improper installation is the culprit here with new guitars) or askew, there are problems. They should look uniform and exhibit as little denting or wear as tolerable. 
{ "thumbImageID": "JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000", "defaultDisplayName": "Jackson JS22 Dinky DKA Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Natural Oil", "sku": "sku:site51500000033288", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Natural-Oil-1500000033288.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Natural-Oil/H97609000003000-00-60x60.jpg", "imgAlt": "" } , { "name": "Metallic Blue", "sku": "sku:site51366901765023", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue-1366901765023.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue/H97609000002000", "brandName": "Jackson", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Metallic-Blue/H97609000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Black", "sku": "sku:site51366901764897", "price": "199.99", "regularPrice": "199.99", "msrpPrice": "266.65", "priceVisibility": "1", "skuUrl": "/Jackson/JS22-Dinky-DKA-Electric-Guitar-Satin-Black-1366901764897.gc", "skuImageId": "JS22-Dinky-DKA-Electric-Guitar-Satin-Black/H97609000001000", "brandName": "Jackson", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/JS22-Dinky-DKA-Electric-Guitar-Satin-Black/H97609000001000-00-60x60.jpg", "imgAlt": "" } ] }
Now that you know the general protocol to a pedal chain, remember there are no strict rules in music. Introducing alternative ways of setting up your effect signals is what starts new trends and even leads to the development of new genres. There are also indisputably more choices in pedals then ever before. Vintage classics have been reissued in mass, are sounding better then ever, and have become affordable (but I doubt you’ll see that DeArmond toaster pedal version any time soon).

The TG-64 was definitely a boss guitar, but even cooler was the TRG-1 transistorized guitar, also introduced in ’64. This guitar did Nat Daniels one better and, instead of putting the amp in the case, put a transistorized amp and speaker in the guitar! To be fair, Danelectro did produce some guitars with a miniature tube amp built-in, but it’s not known if these ever made it to production status. But the TRG-1 is a remarkable guitar available in a confusing number of variations.

Neither player uses any sort of stomp boxes in their rigs. In an effort to emulate his heroes, Bo keeps it straight ahead, using no effects at all, while Frank opts to program his effects via rackmount gear and to make setting changes through a MIDI controller. The advantage is that he can change gain levels, EQs, and effects instantly with one tap, instead of having to do the stomp box break dance in time for the next down beat. Both axemen prefer to get their overdrive the old-fashioned way, by driving the tubes in their amps.
Where there is more than one pickup, a switch selects between the outputs of individual pickups or some combination; two-pickup guitars have three-way switches, and three-pickup guitars have five-way switches. Further circuitry sometimes combines pickups in different ways. For instance, phase switching places one pickup out of phase with the other(s), leading to a "honky", "nasal", or "funky" sound[citation needed]. Individual pickups can also have their timbre altered by switches, typically coil tap switches that effectively short-circuit some of a dual-coil pickup's windings[vague] to produce a tone similar to a single-coil pickup (usually done with push-pull volume knobs).
In a nutshell: Lowell Kiesel is the name of the guy who founded Carvin. He originally sold guitars under his own name, but later changed the company name to Carvin, a melding of the first names of his two sons. So, when Carvin changed the name on their guitars to Kiesel, they were actually reverting back to their roots. Kiesel is Carvin, and Carvin has always been Kiesel.
National Dobro’s involvement with electrics began, indirectly, with experiments conducted by George Beauchamp, who designed his first “electro” guitar in 1931, while actually still with the National company (not yet merged with Dobro). This was a wood-bodied “frying pan” with a pickup probably designed in conjunction with Paul Barth and Harry Watson, another National employee.
Continuing with the rock and metal theme we’ve got going, we come to the Schecter Omen 6. At the time of this writing, the Omen 6’s price on Amazon is about $50 cheaper than you’ll find anywhere else. I hope that continues long after I publish this, because the Omen 6 is an amazing guitar and finding it under $300 is a steal (and may not last long).

We consider the finest tonewoods to be those with superior projection and sustain, and without weak or bright spots within the tonal range. Many of the wood species from the US Pacific NW meet this criteria, and more. Some were well known by luthiers, but others, like Myrtlewood, Claro, Franquette & Bastogne Walnut, Port Orford Cedar, Redwood, Pistachio, Olive, Osage Orange and Douglas Fir are just now gaining notoriety.
{ "thumbImageID": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "defaultDisplayName": "Sterling by Music Man S.U.B. Ray4 Electric Bass Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Satin Black Rosewood Fingerboard", "sku": "sku:site51378221681150", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard-1378221681150.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Black-Rosewood-Fingerboard/H82042000005050-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Walnut", "sku": "sku:site51331921974523", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Walnut-1331921974523.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Walnut/H82042000002000-00-60x60.jpg", "imgAlt": "" } , { "name": "Mint Green", "sku": "sku:site51358268440972", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Mint-Green-1358268440972.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Mint-Green/H82042000004000-00-60x60.jpg", "imgAlt": "" } , { "name": "Satin Blue Rosewood Fingerboard", "sku": "sku:site51378221681125", "price": "299.99", "regularPrice": "299.99", "msrpPrice": "428.00", "priceVisibility": "1", "skuUrl": "/Sterling-by-Music-Man/SUB-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard-1378221681125.gc", "skuImageId": "S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050", "brandName": "Sterling by Music Man", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/S.U.B.-Ray4-Electric-Bass-Guitar-Satin-Blue-Rosewood-Fingerboard/H82042000006050-00-60x60.jpg", "imgAlt": "" } ] }
Add a maple top to the mahogany body, as do a great many Les Paul models, and a blend of characteristics comes forward. The mahogany’s depth and richness remain, but the maple provides added snap, clarity, and definition. It also tightens up the lows and adds more cut to the highs. For many players this sonic evolution is highly desirable, whereas others might prefer the smoothness of the pure-mahogany design.
I had a similar problem and went with a similar solution - the Vox Tonelab amp modeler and multi-effects unit. Has a headphone out that works fine for practice. Plus it is working well for gigging as well. I can practice tunes with the exact amp and effects that I'm going to use. When I get in front of the guitar amp, I just need to get a clean sound and give it a little color in the tone. It isn't perfect for gigs, but it is SO easy to practice with and can sound like a Fender, Marshall, Hiwatt, Mesa - whatever. This is starting to sound like an ad, so I'll stop. :-) – Anonymous Jan 18 '11 at 10:47

Reverbs and delays can sound particularly unruly when run into an amp set dirty. If you use natural amp distortion but still like using pedals, you can run some effects into the front of your amp, and run time-based effects into an effects loop (most modern amps with channel switching will have an effects loop). Some modern programmable pedals, such as the TC Nova System or Eventide Time Factor delay, allow you to switch between -10 and +4 operation, so you can use them in front of your amp at the instrument level or at line level in an amp effects loop. This is really handy, allowing you to create and store presets tailored for using the pedal either in front of the amp or in the loop. Of course you can also use studio-type rack effects in amp effects loops. Units such as the Fractal Audio Axe FX and TC Electronic G-Major work great in this configuration, allowing you to store many presets and get pristine time-based effects, whether you are using clean sounds or dirty sounds.
The Orange Crush PiX CR12L is still a relatively inexpensive option for a beginner amp. In terms of the basic features, it isn’t quite the best value on the market. However, it delivers a better made, better designed beginner amp at a very reasonable price. Beginners that can afford to spend a bit more, but want a standard beginner amp might find the extra cost worth it for the extra quality of the Orange Crush PiX CR12L.
I have had Tracy do quite abit of work for me many times going back since the 90’s, however, now I am “on my own” living a long way from his shop. He is a super craftsman for sure and I wanted to watch how to do some minor things on my own as well as be able to help educate myself before finding someone locally to work on my guitars in the future. Great explanations and for my reference in future.
Well that and the effects, but Ample Sound even admits that the effects aren’t the greatest and recommends using another plugin for effects. Them admitting that might put a sour note on your tongue, but when you’re buying a VI in this price range, often it’s better to go for a plugin that is a master of a few components instead of one that attempts it all.

It is easy to make the mistake that the tone control set-up in an electric guitar is a simple single stage Resistor / Capacitor filter, where the two components are in series, the other side of the capacitor goes to ground, the signal is applied to the other end of the resistor and the output is measured across the capacitor. If that were so then your first calculation is roughly correct, while in a practical situation in the second, the capacitor would be fed from the impedance of the signal source. Lets say this is a test generator with an impedance of 600 ohms – the -3dB cut off would be around 12kHz. This is not the case for the typical electric guitar.
Depending on how you count them, there are 23 types of guitar pedals out there that can take you from "just another guitar player" to being that guy with the definitive tone and stage presence that everyone knows of around town. The only problem is it's a lot to wade through. But we've got you covered with quick summaries of what each pedal does, examples you can hear, and some visual examples for each of the guitar pedal types...
Let's begin by getting clear on what we mean by 'effect': an effect is a device that treats the audio in some way, then adds it back to a dry or untreated version of the sound. Echo and reverb are obvious cases, and you can use pitch-shift and pitch modulation in a similar way. 'Processors', by contrast, generally are those devices that change the entire signal and don't add in any of the dry signal. Things like compressors and equalisers fall into this category: as you'll see from the tips and tricks, processors can often be used as effects in their own right, or as part of an effect chain, but until you know exactly what you're doing and what the consequences are likely to be, it is a good idea to stick to these guideline definitions, as they dictate how you can connect the effects into your system.
The Rocker 32’s secret weapon is its stereo capabilities courtesy of two output stages and a mono out/stereo in valve-buffered effects loop – and it’s this that opens the door to some tantalising effects possibilities. It also features a half-power option incorporated into the front panel standby switch. The enamel control panel follows Orange’s classic 1970s ‘graphics only’ format, using pictograms to describe the control functions. The Dirty channel includes gain, bass, mid, treble and master volume controls, while the clean Natural channel has a single volume control. The Natural channel may only have a single volume control, but it’s perfectly dialled in to flatter practically any guitar and it sounds wonderful, with a glassy treble giving way to an addictive chime at higher volume levels. The Dirty channel’s gain control has a very wide range, allowing fine control of moderately driven sounds, with plenty of Dark Terror-approved filth at the top of its travel, making it ideal for everything from classic Brit rock and blues to modern metal. The Rocker 32’s stereo capability will make it almost irresistible to effects users. Plugging in a decent stereo chorus and setting the outputs to dry/wet sends a clean uneffected sound through one side and a fully wet modulated sound to the other. This wet/dry combination generates the chorus effect in the air between the loudspeaker and the ears, creating a real three-dimensional soundscape that swirls and breathes like a classic Leslie rotary loudspeaker.
A Delay or Echo pedal creates a copy of an incoming sound and slightly time-delays it, creating either a "slap" (single repetition) or an echo (multiple repetitions) effect. Delay pedals may use either analog or digital technology. Analog delays often are less flexible and not as "perfect" sounding as digital delays, but some guitarists argue that analog effects produce "warmer" tones. Early delay devices actually used magnetic tape to produce the time delay effect. U2's guitarist, The Edge, is known for his extensive use of delay effects. Some common Delay pedals are:
Many acoustic guitars come equipped with "light" gauge acoustic guitar strings. This is probably a good place to start - if you are a heavy strummer and find yourself breaking strings often, you may want to consider buying slightly heavier gauged strings. The following is a list of the standard string gauges included with each set of acoustic guitar strings.
That it does, indeed. Acoustic design has been refined to reflect the best possible usage of materials and shape to get the most productive sounds and tones and, as you can see, it's pretty consistent. Wood is the predominant role player in an acoustic's construction, because it directly affects the sound. Only the best, resonant tonewoods would do and they were used to the hilt to make a good sounding instrument as the sound partially relies on it.

Although Led Zeppelin disbanded in 1980 after drummer John Bonham’s death, they have reunited on a few occasions, most recently in 2007 for a tribute concert in memory of Ahmet Ertegun, who had signed them to Atlantic and launched their career. Page continues to go strong. After reissuing the band’s catalog in 2014 and 2015, he’s promised a new project to come in 2016. We couldn’t be happier, and more eager to hear what he has.
Yes and he lost the finger tips on his left hand and attached makeshift fingers out of thimbles but managed to play some of the greatest evil licks ever. I love Eddie but he screwed up Van Halen terribly by getting rid of Dave and turning it into a girl band. Duane was awesome and highly skilled and a sought after studio musician. Clapton is the master.
This is the point where the neck meets the body. In the traditional Spanish neck joint the neck and block are one piece with the sides inserted into slots cut in the block. Other necks are built separately and joined to the body either with a dovetail joint, mortise or flush joint. These joints are usually glued and can be reinforced with mechanical fasteners. Recently many manufacturers use bolt on fasteners. Bolt on neck joints were once associated only with less expensive instruments but now some top manufacturers and hand builders are using variations of this method. Some people believed that the Spanish style one piece neck/block and glued dovetail necks have better sustain, but testing has failed to confirm this. While most traditional Spanish style builders use the one piece neck/heel block, Fleta, a prominent Spanish builder, used a dovetail joint due to the influence of his early training in violin making. One reason for the introduction of the mechanical joints was to make it easier to repair necks. This is more of a problem with steel string guitars than with nylon strings, which have about half the string tension. This is why nylon string guitars often don't include a truss rod either.
If metal is your jam, and you want an amp that will deliver brutal high-gain tone, this is your amp. Sized in a convenient combo package, this 60 watt beast features two channels with independent three-band EQ, pre/post gain controls and presence and resonance adjustment. It’s loud and powerful, yet small enough to throw in the back seat of your car.
SOLD OUT: Here is another fine example of a Professional high quality Japan Crafted guitars...this one is "cross-braced" and is a Dreadnought style acoustic like a martin type exhibiting superior solid construction as well as the very high grade Mahogany body Top - Sides & Back which appears to be all-solid. The necks fretboard is a wonderful Indian Rosewood. This example is believed to be a Vintage 1986 Model. Serial # 86021355. The sound is rich and expressive and very tonefull as would be expected from a quality built instrument. The playability "action" is great EZ to play and this guitar stays in tune very well to with its quality Original Takamine sealed Chrome tuners "grover type" This guitar is professional grade and will serve you well. This guitar is not a new guitar and IS a real VINTAGE guitar and has mellowed well and its condition is rated a solid 8.5/10 very good-excellent with some natural wear -dings-scratches etc.. Overall appearance is Gorgeous! and is sure to please. SOLD .

You will agree with us that the journey to the Canaan land of guitar mastery isn’t always one with bed of roses. Rather, it seem very daunting, especially with so many different types, styles, shapes and sizes in the marketplace—all craving for the bulging eyes of your wallet. But as with anything, the options before you can become clearer if only you can endeavour to filter out the unwanted options—that is, those that aren’t compatible with your immediate needs.

The Jameson Left-Handed Black is an acoustic-electric guitar that comes with a slick appearance, a smooth body, and an impressive sound. With its thinline frame and cutaway design, this model is good for both amateurs and seasoned guitar players. You get a guitar that sounds just as awesome regardless if you’re playing it unplugged or through an amp.
Numerous classic guitars made by the likes of Gibson, Epiphone, Fender, and Guild are worth thousands, sometimes tens of thousands; a little expensive for the average player, and often these are the preserve of investors and collectors. Early versions of the Gibson Les Paul, SG and Flying V guitars, or the Fender Stratocaster or Telecaster. But there are still very many affordable, great sounding, and exciting to play vintage guitars that offer something simply not available in a new guitar. A well-built vintage instrument, although expensive can actually be superb value for money in comparison to some of the new guitars available at that price.
Much of a B3's magic comes from good mic placement and the player (the right drawbar settings are game changers). EQ should be applied sparingly and mainly as a corrective measure. Usually it's good to look to anything clashing with the bass (80 to 180 Hz), and if it's feeling a little "chubby" in the middle and either can't get out of its own way or doesn't play nice with other mid-heavy instruments or guitars, look to make cuts somewhere between 300 to 500 Hz.
The string is not the only thing that vibrates. The guitar itself vibrates, and how it vibrates depends on the tone wood. The pickups are attached to the guitar and therefore they go along for the ride. In other words they vibrate under the strings which adds to the disruption of the magnetic field. So the environment the pick ups are placed in affects the tone. A good example is Neil Young's Old Blackie, which has an aluminum pick guard on it which gives it a unique.
And again. the no-brainer: your guitar just plain sucks.  If your bought your guitar at Wall-Mart for $19.99, PLEASE don't put my pickups in it!!!  Here is EXACTLY what you should do with it: keep it around until you are playing your first big club gig and you need to do something extraordinary to get the crowds attention.  As you thrash away on the final chord of the last song pick up THIS guitar, douse it heavily with lighter-fluid and light that puppy up!  Now that's getting more that 20-bucks worth of wow-factor out of that pile of Chinese dog-dung!

{ "thumbImageID": "4003-Bass-Midnight-Blue/513600000089000", "defaultDisplayName": "Rickenbacker 4003 Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Midnight Blue", "sku": "sku:site51274034491813", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Midnight-Blue-1274034491813.gc", "skuImageId": "4003-Bass-Midnight-Blue/513600000089000", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Midnight-Blue/513600000089000-00-60x60.jpg", "imgAlt": "" } , { "name": "Jetglo", "sku": "sku:site51274034491793", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Jetglo-1274034491793.gc", "skuImageId": "4003-Bass-Jetglo/000000107918146", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Jetglo/000000107918146-00-60x60.jpg", "imgAlt": "" } , { "name": "Mapleglo", "sku": "sku:site51274034491783", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Mapleglo-1274034491783.gc", "skuImageId": "4003-Bass-Mapleglo/000000107918138", "brandName": "Rickenbacker", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Mapleglo/000000107918138-00-60x60.jpg", "imgAlt": "" } , { "name": "Fireglo", "sku": "sku:site51274034491780", "price": "2,249.00", "regularPrice": "2,249.00", "msrpPrice": "2,249.00", "priceVisibility": "4", "skuUrl": "/Rickenbacker/4003-Bass-Fireglo-1274034491780.gc", "skuImageId": "4003-Bass-Fireglo/000000107918062", "brandName": "Rickenbacker", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "Platinum", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/4003-Bass-Fireglo/000000107918062-00-60x60.jpg", "imgAlt": "" } ] }
GuitarsJapan.com respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. GuitarsJapan.com is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.
While I’m on the subject of guitar myths... Many sellers of vintage Japanese guitars have been throwing around the term “lawsuit guitar”, although not usually in reference to Kents. In 1977 the Norlin Company, which owned Gibson at the time, sued Elger Guitars, which was the U.S. distributing arm of Hoshino Gakki of Japan. The suit claimed that Hoshino-made Ibanez guitars too-closely copied the headstock design of Gibson. Just the headstock. By the time the suit was brought out, Hoshino had already changed to a headstock more closely resembling what was on Guild guitars of the time. So it was pretty easy for Elger Guitars/Hoshino to promise not to copy the Gibson headstock anymore.

A. Many professional musicians invest thousands of dollars in high-end guitars made from expensive and rare tonewoods. A $100 student guitar made from spruce is not going to produce that level of tonality regardless of the player’s skill level. As a beginner, your main focus should be on skills such as chord formation, fretting techniques, and basic scales. Improving tonality and performance are long-term goals.
A Direct Inject signal can capture the power-tube distortion sound without the direct coloration of a guitar speaker and microphone. This DI signal can be blended with a miked guitar speaker, with the DI providing a more present, immediate, bright sound, and the miked guitar speaker providing a colored, remote, darker sound. The DI signal can be obtained from a DI jack on the guitar amp, or from the Line Out jack of a power attenuator.
Yamaha is well known for the quality of their mass produced and affordable guitars, and they continue to be the brand of choice for students and even for teachers. The Yamaha FGX800C is tasked to represent brand in the sub $300 price range, and judging from reviews, it is doing very well in the market. Everything about this guitar is conventional, from its familiar dreadnought cut-away shape to its comfortable neck and string action. It also comes with built-in electronics that give you 3-band EQ control and a tuner. But what makes this guitar a bit more special is the use of solid spruce with scalloped bracing for the top, which ups the value of the instrument.
: : I have a Vox Shadow that's sunburst, white pick guard that surrounds 3 solid chrome face pickups and the middle pick up has "VOX" engraved in it. 3 seperate volume controls and a master volume control. Tuning keys are all chrome, and the green decal on the face of the headstock reads Shadow, JMI Dartford, Kent. Neck is attached withthe help of a chrome plate, on the back side of the 'plank' body is an access plate for the jack that states made in England. Guitar also has the original roller/tremelo tail piece with palm lever. The numbers of 64728 are stamped on the back side of the headstock just below the tuning keys. Finish is beginning to crack a bit but it's all original, right down to the volume pots that have to be cleaned from time to time. It must be a rather unknown line that Vox had as I can't find out much on it either. Had this guitar for many years. Was handed to me in pieces in an old 'cardboard' case, (that has since gone away) put it back together and added it to my "music room".
In the 1970s and ’80s the sound of the electric guitar was stretched in heavy metal music. As one of its leading practitioners, Van Halen pushed his self-built “Frankenstein” (based on a Stratocaster but with a mish-mash of other guitar parts) to the limit, experimenting, for instance, with “dive-bombing,” which uses the tremolo arm to drive the guitar’s lowest note ever lower. Hendrix had done this but forced the guitar out of tune as a result. However, by the mid-1980s, inventor Floyd Rose had improved the tremolo system, allowing players like Van Halen to dive-bomb repeatedly. The guitar sound was now not only loud but also really raucous, flashy, and a bit dirty—just the way musicians, and their fans, wanted it.
Dyna Gakki began production in 1972 in the city of Nagano, Japan. They manufactured guitars for Fender Japan and Greco, so they couldn't have been a terrible manufacturer as Fender is very choosy about outsourcing their product. Dyna may have been a source for Japanese manufacturer Yamaki. Dyna also produced the infamous Ibanez badges for a short period of time.

Budget, feel and sound! Don't worry about who plays what or brand names. NONE of that matters if the guitar does not FEEL good to you and have the SOUND that you are looking for. Of course, most people have a budget and there is no need in trying $2000 guitars if you can't afford one, except for expanding your education about different types of guitar.
Jazz guitarist George Barnes is known to have played one of these prototypes in public in 1931, though far as I know, there's no recording of it.  Jack Miller played a "frying pan" in Orville Knapp's orchestra at Grauman's Chinese Theater in early 1932. Another musician, Gauge Brewer, bought two of the first available Beauchamp/Rickenbacher guitars, the other was a more conventional electrified Spanish guitar, and played them in a press event in Kansas, and a series of concerts around Halloween that year. Brewer also recorded both of these sometime in the mid-1930s, but it was one of the old direct-to-record recordings, a one-off, never released to the public (my Mom recorded a bunch of those 78s back in the 1940s and 1950s... tape wasn't quite there yet for regular folks).  Andy Iona was probably the first professional Hawaiian player to go electric.
This Hellraiser C1 guitar features a mahogany body and a quilted maple top and abalone gothic cross inlays. It looks and feels fantastic! A couple of things that make it sound even better are the locking tuners, that keep it in tune, and the EMG noise-cancelling scheme that makes sure that the only sound the guitar makes is the music you’re playing.

By the way, I’d like to also take this opportunity to thank collector and one of VG’s earliest subscribers Jim Dulfer for invaluable help in an ongoing research effort, providing access to his truly impressive paper collection and photographs of some of his instruments. These catalogs are filling in many, many holes in information. You will be reaping the benefits in upcoming “Different Strummer” columns in both information and illustrations, as well as in upcoming book project. Thanks to Jim from guitar fans everywhere!

I wonder if this list shouldn’t be renamed as Best Electric Guitar Brands, since there does seem to be a strong focus on electric guitars in this list. Yamaha does make a very good line of acoustic guitars, and Ibanez and Epiphone also manufacture acoustic guitars, and the Gibson Hummingbird would make any top 10 list of acoustic, but it’s the only one on this list that seems world class for an acoustic manufacturere(other manufacturers on the list may also make acoustics, but I’m not familiar with them) I doubt if they would be considered the best guitars or the most highly respected brands.
The Top Guitars specialized only in Custom Made Electric Guitars and Basses - "We will create an instrument that will delight you with exceptional tone and great playability, optimized to your personal preferences and all with the utmost quality, beauty, and rigorous attention to detail. We are experienced builders of custom electric guitar and bass bodies and necks. We craft our exquisite custom electric guitar and bass bodies and necks using a variety of time tested, great sounding woods, offering options that you can not buy off the shelf. We can also build for anyone that has a custom design that they would like built to their specifications. We do our best to meet your dreams continually striving for unattainable perfection.Only the best, one-of-a-kind, and built just for you! "
Multi-effects devices have garnered a large share of the effects device market, because they offer the user such a large variety of effects in a single package. A low-priced multi-effects pedal may provide 20 or more effects for the price of a regular single-effect pedal. More expensive multi-effect pedals may include 40 or more effects, amplifier modelling, and the ability to combine effects or modelled amp sounds in different combinations, as if the user was using multiple guitar amps. More expensive multi-effects pedals may also include more input and output jacks (e.g., an auxiliary input or a "dry" output), MIDI inputs and outputs, and an expression pedal, which can control volume or modify effect parameters (e.g., the rate of the simulated rotary speaker effect).
×