On Martin guitars, this is a really big deal. Martins all seem to have a problem with the "neck set" on many of their guitars before 1970. High string action is the result, making the guitar very difficult to play. This can only be fixed correctly by a "neck set" (removing the neck on the guitar, and refitting the neck at a slightly increased angle, which lowers the string action). If done correctly, this does not affect the value of the guitar (and in fact can make it more valuable, as the guitar is much more playable). Generally speaking, most players would agree if the "string action" is more than 3/16 inch (5 mm) at the 12th fret, the guitar needs a neck set. This measurement is taken from the bottom of the low-E string, to the top of the 12th fret.
The Wah Wah pedal is one of the coolest guitar effects ever. Released in 1967 as the Vox Clyde McCoy. Oddly enough Clyde McCoy was a trumpet player as the pedal was to be used when amplifying the horn. Fortunately guitarists picked up on the almighty wah. The name Cry Baby has become de facto for the wah as it became the most popular. A wah is basically an active tone control that boosts lower frequencies through higher ones by using the sweep of the pedal. A guitar’s tone knob is passive and just rolls off high end, the wah electronically boosts frequencies.
This can all get a little tricky and can become overwhelming especially if you have never tackled this type of job before. If this is the case, I strongly suggest starting with one of the easier models in regards to wiring e.g. Telecasters are significantly easier to work on as the scratchplate will often be pre-loaded with pickups. However, if you purchase a kit guitar such as an LP or you want to upgrade your electrical components (which is often the case with an entry level kit) understanding some basics about guitar electronics is useful.

But this was different. This was build quality, and it completely wrecked the sound, feel and playability of the guitar. A competent pre-shipment QC inspection should have caught this and sent it back to be fixed at the factory, and they didn't. No serious guitarist would stand for ANY guitar made this way, at ANY price point. Yet there it was, on display on a guitar positioned as the flagship model of the brand, occupying the most expensive price point in the market.

Hollowbody guitars feature full hollow bodies much like acoustic guitars do, and are used often in jazz and mellow style music as exemplified by Jazz greats that include Joe Pass, Pat Martino to name a few. It is however not limited to just that as exhibited by Brian Setzer and his Rockabilly style, along with Chet Atkins and his iconic country guitar playing.
It will take time to write and update all of the content at once. Come back regularly and I promise that there will be always something new for you to read, the list with essential guitar effects will be constantly updated. If you are just starting out, we recommend going through some online guitar training before you dive in the guitar pedals world.

In ’71, Univox introduced what are arguably their coolest-looking amplifiers, the B Group, covered in nifty two-tone blue vinyl. Remember, this was the tail end of the heyday of Kustom, with its colored tuck-and-roll amps, and the two-tone blue with a red-and-white oval logo was boss. The lettering was the same uppercase blocks as on the outline logo. These new Univox amps were hybrids, with solidstate power supplies and lots of tubes – lots! The Univox B Group had two combo and two piggyback guitar amps, two piggyback bass amps and a piggyback PA. It is not known how these were constructed, but because previous amps had Japanese chassis put into Westbury-made cabinets, these were probably built that way also.
Founded by the American Orville Gibson in 1902, Gibson is without a doubt the other legendary electric guitar brand. Their most famous model holds the name of the very popular guitarist Les Paul, who collaborated with Ted McCarty in its design back in the 1950's. Unlike the Telecaster and Stratocaster, the Les Paul boasts a mahogany body, a set mahogany neck, a rosewood fingerboard, and a maple top. Among the many Les Paul players we find Jimmy Page from Led Zeppelin:
Two full steps down from Drop D. Utilized by bands such as A Day to Remember (on Mr Highway's Thinking About The End, Welcome To The Family, Violence (Enough is Enough), Life Lessons Learned the Hard Way and Sticks and Bricks), In Flames, Hostility, Issues, Static-X, Bring Me the Horizon (since Suicide Season), Hellyeah, Amaranthe, Breaking Benjamin (since Phobia), Parkway Drive, Otep, Spineshank, RED, Bury Your Dead, Eye Empire, Dirge Within, Remembering Never, and occasionally Chevelle, Darkest Hour, Evanescence, 9oz. of Nothing, and For the Fallen Dreams.
* The Chinese examples I have seen tend to weigh more. One Indonesian model I saw weighed a full pound and half less than the Chinese model right next to it. There is not, unfortunately, any way to tell from the box or from the barcode or SKU number on the box what factory a given example inisde the box came from. The system will deal out whatever is in stock at the moment.
“The California Series captures the true meaning of a Fender acoustic guitar,” said Billy Martinez, VP Category Manager – Acoustics and Squier Divisions. “From the iconic 6-inline Stratocaster headstock to the original Fender body shapes and organic styling, everything about these guitars is uniquely Fender making them the ultimate tools for artistic creative expression. Whether you’re at the beach or rocking out with a band on stage, we’re offering players of all levels a chance to express their own creative style, standing out in the crowd with the bright colors and energy these guitars give off.
This truly is a pleasure writing about the best kept secret in the guitar world. The G&L Legacy Tribute. I own a USA Hamer Gold Top Archtop Standard with P-90's and it's stupendous guitar. But like all Les Pauls and high quality Mahoganies, it has a growl suited for certain kinds of Rock N Roll. However, there is another voice in my guitar arsenal and I only have one other. The G&L Legacy Tribute. This guitar can cover the other half. I bought this used for $299 and four years later I still can't put it down. So I have a $2600 guitar and a $299 guitar and love them equally. What does that tell you about the Legacy Tribute?
Scale Length – Scale length of a guitar refers to the length of the strings and it is measured from the nut to the bridge. Guitars with longer scale length have tighter string tension with a brighter tone and well-defined low end. Guitars with shorter scale length have less string tension which allows easier bending of the strings and it offers warmer tones.
This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.

Hook isn’t worried the current challenging economic pressures will jeopardize the guitarist’s iconic status. “The guitar hero will never go away,” he said. “People adore this image of the guitarist almost being like a cowboy. You will always see the odd-looking kid walking down the street holding a guitar — there just might not be as many of them.”


ATTACHING AND DRILLING THE NECK For this you will want to use a clamp to hold the neck firmly in place while you dril the holes. Attach the neck to the body and clamp it lightly so you can set it in the right possition before drilling. Make sure you have some protection between the clamp and the body so you don't leave any indentions in the wood. A soft piece of plastic or a soft rag will work nicely. Use a long ruler to allign the neck to the position of the bridge. Do this on both sides of the neck to see that you get it centered. Tighten down the clamp a bit more until the neck doesn't move. Drill the holes as straight as possible with a smaller bit that you used on the body. If you can't reach all of the spots that you need to drill at because the clamp is in the way, take a couple of the furreles and neck screws and screw them into the neck. Once you have done this you can finish drilling the other holes with out the clamp.
Rickenbacker is one of the most important electric guitar companies of all time. Despite their status, some people consider them as rhythm guitars and nothing else. That, of course, is a simple generalization. You can still do pretty much anything with a Rickenbacker and, on top of that, there are some things that only a Rickenbacker can do. For example, Roger McGuinn’s work with the 12 string and Townshend’s power chords. Other guitars could work, but there is something about Rickenbacker that pushes those moments to a higher level. Rickenbacker has a specific feel when you hold one. It’s smooth and slick and it feels as if you can play any style. Rickenbacker’s design is also unique, it’s a mixture of classical and modern designs. If you’re looking for a classic guitar with big noise, Rickenbacker could be for you.
In 1967 Lipsky introduced a line proto-copies carrying the Domino brand name. Most were inspired by European models such as the EKO Violin guitar. Among the offerings were two models sporting a California cache, the #502 Californian, an asymmetrical copy of a Vox Phantom, and the #CE82 Californian Rebel (wouldn’t California Rebel have made more sense?) shown here.
Hertz Guitar is a well known brand, which manufactures high quality guitars. The company was originated from Shanghai,China and North Korea. Their musical instruments were introduced on September 2009. They offer world class quality instruments from world class branded production houses. They maintain international standard. It mainly focuses on musical instruments as well as accessories. They manufacture a wide range of guitar. Available at below Rs. 12,040/- (approx).
Before doing a setup, I’d recommend you put a new set of strings on the guitar. Specifically put the type of strings on that you intend to use in future, since different gauges (and sometimes brands) can require a slightly different intonation setup. If you don’t know how to restring a guitar, then have a look here: http://diystrat.blogspot.com/2011/08/stringing-guitar.html

Slicer – A dynamic effect that sounds like your guitar tone is chopping in and out. This percussive effect is akin to sequencer-type effects used by synthesizers. The effect turns the volume of the signal on and off, and sounds like the signal is being “chopped up” or “sliced” in a specified pattern. The BOSS SL-20 Slicer features 50 patterns to turn your guitar into a groove machine!
The quarter-sawn mahogany neck has a rounded “C” neck shape and it’s topped with a smooth 22-fret A-grade dark rosewood fretboard with small block pearloid inlays. The 2019 Gibson ES-335 Figured also features an ABR-1 bridge with titanium saddles for added sustain and clarity and Memphis Historic Spec II humbuckers. In addition, this classic axe now has MTC Premiere Controls.
The Orange Rocker 32 2x10" Valve Combo Amp is a great amp for those who want a serious amount of power on stage. This all valve stereo amplifier allows you to channel into that signature Orange crunch and utilise the stereo effects loop to really make use of any stereo pedals you may have (Strymon Timeline etc.)  Enjoy massive panning delays, previously only possible by using two amps at once and knock the power down using the "Half Power Mode” for home playing.
• Stop: A stop tailpiece is a bar, typically made of an alloy, which is held to the body of a guitar by large screws threaded into embedded sleeves. They are most often aluminum, zinc or brass based, with the latter the most costly. Aluminum has a few advantages. When the stop tailpiece was perfected by Gibson over a half-century ago, the originals were made of aluminum. Many players prefer those today for the vintage vibe, but aluminum is also the lightest weight tailpiece alloy, which some believe allows the strings and the guitar’s body to connect — which is another function of the tailpiece — in a more resonant fashion. It’s best to be careful while changing strings with a stop tailpiece, because they sometimes fall out of their sleeves and can scratch the finish.

Full hollow-body guitars have large, deep bodies made of glued-together sheets, or "plates", of wood. They can often be played at the same volume as an acoustic guitar and therefore can be used unplugged at intimate gigs. They qualify as electric guitars inasmuch as they have fitted pickups. Historically, archtop guitars with retrofitted pickups were among the very earliest electric guitars. The instrument originated during the Jazz Age, in the 1920s and 1930s, and are still considered the classic jazz guitar (nicknamed "jazzbox"). Like semi-acoustic guitars, they often have f-shaped sound holes.
Even though recorded sound traces back to late 1877, the widespread access to this technology has only become available some 60 years later. As we go back in time, reaching 1940s, we run into the first ever instance of reverberation being used in music recording. It didn’t really take long for this trend to become popular, spreading throughout the world. However, back then there were no effects pedals or anything similar. Devices we have today were science fiction at best. Old school producers had to resort to various other means to achieve the reverb effect.

A vintage pickup is literally old. “Vintage-style” usually means a new pickup designed to sound like an old one. Vintage and vintage-style pickups generally have only moderate output. The term “vintage” has most often been applied to designs that originated before 1970, though as we move forward in time, so does the expiration date on “vintage.” But for now, at least, all vintage-style pickups are passive.
I’ve tried some guitars for beginner, being beginner myself! And let me tell you… around 500 USD and under 1000Usd they are plenty BUT. Avoid Epiphone. I got one and let me tell you, the material is weak. I’m mean the construction material. Some time after buying my Epiphone standard pro (lespaul) I tried a PRS SE245, it is a single cut too but… man, the playability and the quality of construction are absolutely not comparable. For the price I think it is the best single cut you could find! And to say the truth, now I started to play correctly. I’ll sell my first one and I’m going to buy a PRS McCarty 594. PRS is really high quality material. From bottom line to high end models!
The Omen line is made for everyone, but perhaps leans just slightly toward the shredding crowd. This guitar features a maple bolt-on neck which features a rosewood fretboard with pearloid inlays. The inlays are a nice touch at this price, if you’re into that sort of thing. The pickups are Schecter Diamond Plus humbuckers and offer a well-balanced tone that can also be aggressive when needed. Twenty-four jumbo frets means this is good for speed.
Epiphone are a well respected subsidiary of Gibson, and have been making musical instruments since their founding in what is now Turkey, Europe, in 1873. After being acquired by Gibson in 1957, Epiphone are now best known for manufacturing affordable versions of some of the most iconic guitar models around, including the Les Paul and SG. However they do make a couple of original models, such as the Casino, which was famously used by the Beatles.
The Epiphone G-400 features a mahogany body and neck and a rosewood fingerboard. It has Alnico Classic PRO™ pickups with coil-splitting on both pickups via a push/pull control on the pickups’ volume controls which gives you a lot of tonal variety. If you want to nail it like Angus Young, Eric Clapton in his Cream days or Tony Iommi from Black Sabbath, the PRO gives you the sound of a true SG without the vintage price tag.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: http://www.guitarnuts.com/wiring/shielding/shield3.php Some great info on that site, you should have a browse around!

Conklin: Conklin is a quite well known brand in the world of high end custom shop guitars. The level of customisation they offer is absolutely amazing. They offer their own body designs or you can submit your own custom body design, as far as design is considered, with Conklin your imagination is your limit. They also offer melted top wherein they combine two or more woods in a seamless way to create a top that looks as if woods have melted into each other, but they don’t stop only at beautiful tops, they even offer option for melted fretboard wherein two are more woods are beautifully combined to create a masterpiece for a fretboard. They use Lundgren pickups as their standard choice. You can even order guitars with special switching configuration customised to your liking. Their neck-through guitars are just excellent, even their bolt-on neck guitars are set precisely and have a nice tapered neck joint which makes you feel as if you’re playing a neck through guitar. The level of craftsmanship on these guitars is just mind-blowing.

List of guitar brands that include the most reliable models available. Guitar brands include those from major manufacturers of musical instruments, including Yamaha, Gretsch, Gibson and more. This list answers the question, 'What are the best guitar brands?' Users looking for a new guitar will want to research a variety of different brands to find the one that best suits their needs, based on function and features.
This is a rare bird. Its a early ibanez maxitone 994. It has a huge neck but plays pretty great! It has that classic MIJ tone. I can include a new Gator case for $50 extra! The neck and frets are good! The electronics are a little dirty. Ill clean them the best i can, but i thoughtit worth mentioning. It is functioning as it should be just a little dirty!
Alonso de Mudarra's book Tres Libros de Música, published in Spain in 1546, contains the earliest known written pieces for a four-course guitarra. This four-course "guitar" was popular in France, Spain, and Italy. In France this instrument gained popularity among aristocrats. A considerable volume of music was published in Paris from the 1550s to the 1570s: Simon Gorlier's Le Troysième Livre... mis en tablature de Guiterne was published in 1551. In 1551 Adrian Le Roy also published his Premier Livre de Tablature de Guiterne, and in the same year he also published Briefve et facile instruction pour apprendre la tablature a bien accorder, conduire, et disposer la main sur la Guiterne. Robert Ballard, Grégoire Brayssing from Augsburg, and Guillaume Morlaye (c. 1510 – c. 1558) significantly contributed to its repertoire. Morlaye's Le Premier Livre de Chansons, Gaillardes, Pavannes, Bransles, Almandes, Fantasies – which has a four-course instrument illustrated on its title page – was published in partnership with Michel Fedenzat, and among other music, they published six books of tablature by lutenist Albert de Rippe (who was very likely Guillaume's teacher).

No matter whether you used method A or B, you can now go about measuring the neck bow. This is done by measuring the string height (the gap between the ruler/string and the top of the fret) at about the 8th fret. There is a lot of debate over how straight a neck should be, and in fact it really is personal choice, but a height roughly the same as the thickness of a B string is a good starting point. Personally, I use a 0.012” feeler gauge to do this, but you could use a B string. Simply slide the feeler gauge/B string into the gap to see if it is too big/small.


Though it gained immense popularity during the rock ‘n’ roll days of the 1950s and 1960s, the electric guitar was invented in 1931. The need for the amplified guitar became apparent during the Big Band Era as orchestras increased in size, particularly when guitars had to compete with large brass sections. The first electric guitars used in jazz were hollow archtop acoustic guitar bodies with electromagnetic transducers. By 1932, an electrically amplified guitar was commercially available. Early electric guitar manufacturers include Rickenbacker in 1932, Dobro in 1933, National, Epiphone and Gibson in 1935 and many others by 1936.
×