This said, the gig bag itself looks like it is top quality, with properly cushioned straps so you can wear it on your back if you need to, making it a great option for carrying it across town or campus. The only thing is, the listing says the guitar is lightweight, but at 16 lbs, some people would not say this is “light.” At least not compared with some of the more inexpensive models in this review list. After all, the back and sides of this instrument are made of mahogany, which is a hard wood. This makes the guitar more durable, but not easy for some to lift.
Even by the mid 1970s costs to manufacture instruments in Japan were rapidly rising. Labor was still cheaper than in the USA (it isn't anymore), but real estate, raw material, fuel, transportation costs and virtually all other manufacturing costs were fully as much if not more in Japan as in the USA. The Japanese were able to compete in the international market due not only to low labor costs at that time but also due to highly efficient manufacturing techniques and the fact that their low-cost workers were skilled and highly motivated.
Finding a good pickup for an acoustic guitar is a real personal choice that will depend on your budget, style, aspirations, and the actual guitar you own – that’s why we’ve written a focused article on the best acoustic pickups. Among the myriad of acoustic pickups on offer, you’ll find the quickest to install are transducer pickups, which attach to the face of your guitar – an affordable solution, although the sound quality isn’t as advanced as others. A step up is both undersaddle and soundhole pickups, which have their own pros and cons, while – at the higher-end – you’ll find internal microphones and hybrid mic/pickup systems, which offer a beautifully rich, natural tone. A great example of one of these hybrid systems is the LR Baggs Anthem Tru-Mic.
I have been a rock drummer for 40+ years. Due to extreme back surgery I am laid up for a few months so I decided to try a little guitar. I wanted something that both looked and sounded good, but did not want to spend a fortune. My son in law just bought a very similar Martin guitar. He was amazed when he saw and played my Jameson, and completely shocked when he was told that he paid 10 times what I did. The finish looks like glass. Not a single flaw that I could find. The color is deep rich and absolutely beautiful. The sound both acoustic and electric is exceptional. My jam buddies are constantly asking to borrow it. These are guys that on a daily basis play vintage models of Gibson, Fender, Martin. My only observation rather than complaint is that I would have liked a better,
Polishing the frets is a whole instructable by itself, but I definitely recommend that you do it at least once a year. It makes the guitar look nice, and it gets some of the oxides off the frets(not sure if it really helps anything, but it sounds helpful, right?). Also, the tape pulls out some of the junk in the open pores of the wood(if your fretboard is rosewood).
When considering the guitar from a historical perspective, the musical instrument used is as important as the musical language and style of the particular period. As an example: It is impossible to play a historically informed de Visee or Corbetta (baroque guitarist-composers) on a modern classical guitar. The reason is that the baroque guitar used courses, which are two strings close together (in unison), that are plucked together. This gives baroque guitars an unmistakable sound characteristic and tonal texture that is an integral part of an interpretation. Additionally the sound aesthetic of the baroque guitar (with its strong overtone presence) is very different from modern classical type guitars, as is shown below.

I think this is one of the better done tests. Any musical instrument is subjective, so there is no “this one sounds ‘better’”, but having an understanding of how individual components interact in the overall sound is important in a luthier. Too often players are too quick to label one guitar as sounding “good” or “bad” instead of quantifying what characteristics they do or don’t like. Building this sonic vocabulary helps a musician work their way towards their ideal instrument instead of haphazard trial and error.
Transistors are related to crystals. Their individual function is non linear and have to be arranged in compound groups to behave as a linear circuit. Solid-state amps operate at low voltages (10 - 100V). Valves amps operate at high voltages (200 - 600V). Speakers operate at approx (0 - 40V). The Output Transformer converts the high operating voltages of valves to the lower operating voltage of speakers. A transformer has 2 separate coils of wire (primary and secondary) wound around an iron core. Electricity flowing through wire causes a magnetic field around the wire and visa versa, a changing magnetic field causes electricity to flow through wire.
The best acoustic guitar brands in India are available for beginners to buy. When buying a guitar at a beginner level, it is good to go with the acoustic guitar. This is the type of guitar that is easy to learn and play. The strings are available in various materials. The make, shape, style, and material used in the strings are the features to look at when you buy a guitar. Acoustic, Electric, Spanish Guitar, Steel, Bass, and Resonator guitars are available in India. You can also find twelve string guitars to buy at a few locations in India. You will find amongst this list, best guitar brands in India for beginners as well as advanced learners.
When it comes to buying an electric guitar there are a lot of options available, and choosing one can be confusing. This guide will help you understand the basic differences in electric guitars so you can make an informed decision. And remember, we’re here to help with friendly Gear Heads available at 1-800-449-9128 who can guide you to the electric guitar that best meets your needs.
His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.
Frets are positioned proportionally to scale length—the shorter the scale length, the closer the fret spacing. Opinions vary regarding the effect of scale length on tone and feel. Popular opinion holds that longer scale length contributes to greater amplitude. Reports of playing feel are greatly complicated by the many factors involved in this perception. String gauge and design, neck construction and relief, guitar setup, playing style and other factors contribute to the subjective impression of playability or feel.
Yes, he wears a KFC bucket on his head and a Michael Myers mask on his face, but he's a genius. Buckethead (real name Brian Carroll) plays every style, from country to death metal. Albums like 'Monsters and Robots' and 'Population Override' are must-haves for any aspiring guitarists, and instrumentals like 'Nottingham Lace' and 'Too Many Humans' take some beating. - Floods

But here’s the thing: every single useful DAW is available for a 30-day demo or so. So you can at the very least try before you buy. The only downside is that some of these are only available in their full “pro” versions, so if you’re on a budget, you can get the 30 day (or more : REAPER has a 60 day demo and only costs $60 if you keep it, but I don’t know if you’d do live stuff with it… some of the fun will be figuring out all the tech).


Harmoniser – a frequency-based effect that sounds like a second guitarist is playing in harmony with the original guitar signal. The effect is created by doubling the guitar input signal and then shifting the pitch of the double up or down at a certain interval (usually a 3rd, 5th or octave). The harmony effect is often used in the metal and hard rock genre to play solos.
The Squier Vintage Modified Jaguar Bass has major “cool” factor, and the sound holds out, too. With a P-bass style single in the neck position, and a J-bass style single in the bridge position, you’ll actually get the best of both worlds in terms of tonal options on the pickups. You have a choice between basswood (on the sunburst and crimson models) and agathis (on the black model), so there isn’t anything special about the woods they’re using in these basses. But the slim, fast-action, C contour of the maple neck will give you a nice, smooth J-bass feel that plays well above this guitar’s pay grade.
Gibson gave this guitar a comfortable V neck profile, which together with shorter 24.75" scale length and 1.725" nut width make this guitar one of the easiest instruments to play in this list. My only complaint with this guitar is its bank breaking price, but this steep price point and exclusivity play an important role in making this iconic instrument more appealing. Start saving now if you want to be one of the privileged few who can play this guitar.
Vacuum tube or "valve" distortion is achieved by "overdriving" the valves in an amplifier.[40] In layperson's terms, overdriving is pushing the tubes beyond their normal rated maximum. Valve amplifiers—particularly those using class-A triodes—tend to produce asymmetric soft clipping that creates both even and odd harmonics. The increase in even harmonics is considered to create "warm"-sounding overdrive effects.[37][41]

Im wanting to build my own 8 string fanned fret with a 30" scale length and a bit more string spacing than a standard 8 string. My Ibanez rg8 has about 9mm from center of string to center of string. I figure I will build a few with cheap lumber from home depot without expecting to play it at all. I want a neck through style as well. Does anyone know where to find some info on building something like this and specifically how to properly set up the frets?
Type – the dielectric used in the capacitor. Polyester and polypropylene are most common, with ceramic capacitors also being popular, especially in lower-end instruments. Reissues of vintage instruments often use reproductions of vintage paper capacitors, which are also popular aftermarket replacements. Finally, audiophile-grade polypropylene film and foil capacitors are sometimes used in custom instruments, although their size can prove problematic as they're designed for use in audio amplifiers and consequently have working voltages in excess of 500 V, far higher than anything encountered inside an electric guitar.[16]

We would suggest that you don’t check price tags too much when choosing your guitar. If you try a few out in a music shop you can ask them to suggest a few different guitars within your price range and then try them out only thinking about sound, looks and feeling. This way you won’t be fooled by a cheap price tag to think that a guitar can’t be any good, or the opposite, be tricked into thinking that just because a guitar is expensive it has got to be the best.
In typical pedal effect chains you will most likely be running cable lengths that are much longer than 5.5 meters. The ME-80 allows you to keep your tone pure when running lots of effects. You can run a cable up to 5.5 metres into the input of the ME-80. The multi effects engine processes up to 8 effects in its internal signal chain. Then the ME-80 outputs your guitar signal as a 2,000 Ohm low impedance signal allowing you to run a much longer cable to the amplifier.
When Levon Helm of The Band sang "I pulled into Nazareth, was feelin' about half past dead" in "The Weight," he wasn’t alluding to a weary pilgrim’s desire for salvation. Rather, he was singing about a mythological trip to Nazareth, Pennsylvania, home of C. F. Martin & Co., makers of Martin flat top acoustic guitars. Founded in 1833 by a German immigrant named Christian Friedrich Martin, whose father was also an instrument maker, Martin...Continue Reading
So there we have it. Acoustic guitars are not just slabs of wood, one much the same as the other. Each has its own characteristics. Some will major on comfort, while others go flat-out down the path of pure volume. Whatever it is you’re looking for, Dawsons has the whole gamut of acoustic guitar body types, and can help you choose the size and style that’s right for you.
This guitar is truly a practice friendly instrument, with its smaller body and shorter scale length of 21.25", this acoustic is definitely easy on the hands. The neck profile is specially beginner friendly, great for first timers who are looking to learn the instrument. The parlor style body makes it easy to handle and carry around, ideal for young players and students of the instrument who travel. The downside to having this smaller body design is the lack of low-end, but it does make up with articulation and comfort.
Compression/Sustain – a dynamic effect that smooths out the highest and lowest volume levels of your guitar signal to a more consistent level. A compressor also has the side effect of increasing the sustain of your guitar signal. Compression boosts the overall level of your guitar while clamping down on the volume of the loudest parts to prevent clipping. Compressors usually have an attack knob that allows you to control how fast it takes the compressor to start effecting the tone and a threshold knob that sets the volume level that the compressor starts clamping down on peaks.
You wont be sorry with this harness, full size volume pot , push pull tone pot/switch both with good throw torque, great solder connects and a quality, all hardware was intact , just remove replace, I did have to carefully bend the lugs on the input switch to get it to seat properly in my Epiphone but other than that minor obstacle all went well, no hum or noise and the toggle feels solid, man Epiphone put some straight up junk electronics in my guitar so this was a great upgrade, thanks Kmise you got a new customer..will order another for my Jackson Kelly..
According to the laws of electromagnetism, whenever an iron coil is moved inside a magnetic field, an electric potential is generated in the iron coil. This arrangement is known as an electromagnet. An electric guitar uses the same principle for generating an electric signal using small electromagnets which is then rectified and amplified to reach an appropriate audible sound level.

Need an affordable luthier who is easily approachable with a cool little shop that rivals Pinocchio's gepetto? Then Steve Morrill in Boston is the place to take your beloved stringed contraption. I took my stratocaster here a few months back for a basic setup( innotation, neck/pots cleaning, truss rod adjustment, etc.) He did it all in less than a week's time and at a very good price--just $65 for everything including new string setup. I was able to play a few notes on his fender amp when I picked it up and was immediately pleased. The aura and smell in the little shop is enough to guarantee Mr. Morrill will do your guitar right. Also doesn't hurt to help out a small business as opposed to going to guitar center, there's much more thought and time out into the work here.


Fuzz was originally intended to recreate the classic 1960's tone of an overdriven tube amp combined with torn speaker cones. Oldschool guitar players (like Link Wray) (citation needed) would use a screwdriver to poke several holes through the paperboard part of the guitar amp speaker to achieve a similar sound. Since the original designs, more extreme fuzz pedals have been designed and produced, incorporating octave-up effects, oscillation, gating, and greater amounts of distortion.
By 1941, much of the pre-war Supro line had disappeared, to be replaced with what would eventually turn out to be a good portion – and look – of the post-war Supro line. Gone were the Supro Avalon Spanish, the acoustic resonators and the nifty amp-in-cases. The Supro Avalon Hawaiian was gone, in name, though its spirit was directly inherited by another lap, the Clipper. Also gone were the mated pickups in favor of a more traditional design with exposed polepieces. These with some variations, would prevail for the next decade or more.

The Univibe effect was produced to also mimic the sound of the Leslie rotary speaker, but in a slightly different way from the new digital pedals previously mentioned.  They often combine slight amounts of all modulation type effects at the same time to approximate the rotary sound, but became a unique sound of its own.  Some pedals allow some individual tweaking of each modulator, but most typically allow the user to adjust the speed of the Univibe effect.
If this doesn’t work, or you’re just a little paranoid about hooking the guitar directly into the PC, you can get one of these. This is the Line 6 Pod Studio GX, and it’s a great value and pretty much a one-stop shopping starter kit. The box you see there is a guitar USB interface, with an input designed for guitar. It’s also got a headphone output, so you can listen through the interface. I had an older version of this ages ago, which I used for basic guitar input until I got some more advanced recording gear that worked well with guitars.

You might have read our review about the C40 GigMaker kit from Yamaha earlier on. This is a similar guitar, but it’s the C40II, and the black color makes it a limited edition instrument. The inlay is less “traditional” looking. Instead of an ornate “rosette” style, the inlay is a stripe pattern all the way around the sound hole, making the guitar look somewhat “jazzy,” to use a more descriptive term. So if this is the look you prefer, read on for more details.


You have all the control you need over your effects and you can use all three at the same time, too – ideal for those who like to create big walls of sound. The delay features a tap tempo control, whilst the FX loop connectivity allows you to hook up any other effects pedals you might have before the delay, which ensures the tonal qualities of those pedals are intact.
I think the best is at DiGiSTORMERS :: Online Music Studio - Home digistormers website and there is an acoustic guitar vsti which sounds like the real one in the products plugins section. I never use anything else. I used to record live guitars, but using this it is not needed anymore. Also mistakes are recorded!!! It is not perfect then, so it sounds more realistic.
Ovation’s first solidbody bass guitars were the 1261 Magnum I and 1262 Magnum II, introduced in 1977, as well. While not as exotic as the Breadwinner/Deacon, the mahogany Magnums had an elongated offset double cutaway design that basically had nothing to do with Fender. Surprised? The upper horn was a bit more extended than a Breadwinner and the upper edge had a slight waist. The lower bout cutout was not as dramatic as the guitar equivalent. Both basses had bolt-on mahogany necks reinforced by three strips of carbon graphite to eliminate warping, a wide strip in the center of the back and two more underneath the fingerboard. Fingerboards were unbound ebony with 20 frets and dot inlays. Both basses had a cast metal housing with two pickups, a small split double-coil unit at the bridge and a large square four-coil unit at the neck, this latter with little screw-adjusted trim pots for micro adjusting volume. The bridge/tailpiece was a heavy-duty plastic housing with heavy adjustable saddles. In front of the bridge was a lever-triggered mute. The primary difference between the I and II was in the electronics. The Magnum I had a three-way select with two volume and two tone controls. It also had two jacks allowing either mono or stereo output. The Magnum II had the three-way plus a master volume and an active three-band graphic equalizer, mono output only.
Another point to remember about ’65 Teisco Del Rey guitars. While, in reality, Japanese Teiscos were never too particular about consistency in headstock design, they at least tended to show consistency in the catalogs. The American Teisco Del Reys were even more varied, and the ’65 Teisco Del Rey catalog shows a mix of the Bizarro square Strat head (the most predominant), the new ’64 hooked design, and the older elongated Strat design. This is probably explained by the vicissitudes of stockpiles and shipping to the new American market. In any case, it makes it a bit harder to date these instruments.

4-conductor humbuckers are fun to wire because they offer many combinations to play with. Some pickups have another bare wire which is there for shielding and should always be grounded. Manufacturers have their own color code, so make sure you find the right color code before connecting anything. Below is color code diagram for common pickup manufacturers.
I have a almost identical one in front of me, but mine has 3 pickups. It has the same color white guard and sunburst pattern. The back of the guitar has the redish sunburst pattern on the neck like yours but also has the red on the main body, unlike yours that has a colored neck and solid color back. I can’t find a picture of a 3 pickup that is like this. Any info would be nice to know.
Another great book by Nicolas, this one shows you exactly how to create your own personal tone using amplifiers, effects and your guitar itself. Any beginner will benefit from this clearly written guide including everything from a breakdown of all the different ways to individualize your guitar playing technique, to information about virtual effects.
Though comfortable playing many styles, Atkins was most often associated with country music and the acoustic guitar. By using a combination of his fingers and a thumb pick, he created his signature “fingerpicking” sound—a style somewhat inspired by fellow guitarist Merle Travis. Atkins even recorded a duo album with Travis, as well as with other respected guitarist like Doc Watson, Les Paul, Jerry Reed and Mark Knopfler.
His first solo album, Texas Flood, was released in 1983 and featured blistering renditions of “Testify” and “Texas Flood” as well as now-classic originals like “Pride and Joy” and “Lenny.” Several other successful solo albums followed. On August 27, 190, Vaughan perished in a helicopter crash while returning form a gig he shared with Eric Clapton, Buddy Guy, Jimmie Vaughan and Robert Cray.

Certainly, the response to these innovative guitars at the time gave no indication. They tanked pretty quickly. No one has ever even seen a real Moderne, and players didn’t warm up to the Explorer and V until the 1970s. These models even inspired at least two new American brands – Hamer and Dean – both dedicated to making “improvements” on the Gibson originals. Japanese manufacturers also picked up on the appeal of these designs.
GUITAR BLEND/BALANCE POT, 500KA.  Bourns dual MN taper blend-balance with center detent. Split shaft. 17 mm body diameter. 1/4" knurled shaft diameter. Solder lugs. 3/8" bushing.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  500K, Special MN taper used for balance/blend pots.  Nut and washer included.   Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
1947: Open back Grover Sta-tites on 0, 00, 000 models style 21 and lower. These post-WW2 open back Grovers have thin seamed buttons and the pointed baseplates which were never used on the pre-war open back Grovers. Also all the pre-war thin seamed button tuners were 6:1 ratio. The post-war tuners (and the thick-button open Grovers after 1937) were 12:1 ratio This makes post-war open back Grovers more easily identifible. Otherwise the post-war Grovers are direct drop-in replacements for the pre-war versions.
Although most of us who participated in this article have years of experience with guitar amps, none of us was particularly familiar with all the latest beginner models. There are few reliable professional reviews of beginner amps, but I sorted through what we found, searched through music stores and websites, and sampled numerous models at the recent National Association of Music Merchants (NAMM) show in Los Angeles. This experience gave me a good idea of what’s available now.

First, remove the knobs of the pots that you want to replace. Some knobs are held in by setscrews. Look around the shaft of the knob to see if there is a screw head then unscrew the screw and remove the knob. Most knob are mounted on split shaft pots. There are no setscrews on a split shaft pot. Friction and pressure hold the knobs on the shafts in this case. You can pull the knob directly off the shaft of the pot since there is no screw. If the knob is stuck on the shaft, I usually use heavy gauges guitar picks to try to pry up the knob. You may also wrap a thin rag around the bottom of the knob and pull the knob off the shaft. Regardless how you get the knob off, be careful not to dent or ruin the finish on the top of the guitar. It is easy to rip the knob off of the pot and accidentally drop it on the guitar. Once the knob is removed, you can unscrew and remove the nut on the top of the shaft.
{ "name": "Ebony", "skuUrl":"/guitars/epiphone-les-paul-special-vintage-edition-electric-guitar/j40301000002000", "status": "instock", "statusText": "In stock", "pimStatus": "R1", "inventoryText": "In Stock & Ready To Ship", "inventoryKey": "in_stock", "price": 149.00, "formatedIntegerValue": "149", "decimalValue": "00", "isOnSale": false, "easyPayOptions":"0,0,7500007,12 Months Promotional Financing,10/28/2018,Special 12-month financing. Valid through,149.0,true,/pages/Gear-Card-Rewards.gc", "msrp": 248.00, "salePrice": 149.00, "listPrice": 149.00, "isPriceDrop": false, "priceDropPrice": "", "savingPercent": "0.00", "promos":["freeShipping","topRated","guarantee","international"], "warranty": true, "freeWarrantyAvail": true, "sku": "site1skuJ40301000002000", "displaySku": "J40301 000002000", "serialized": false, "shipsFree":true, "condition": "New", "priceVisibility": "1", "scene7SetID": "MMGS7/J40301000002000_MEDIA_SET", "invMsgVendorDropShip":"false", "invMsgOverSized":"false", "invMsgBackOrdered":"false", "invMsgPreOrder":"false", "invMsgPromiseDate":"", "invMsgAvailability":"", "invMsgDetail":"", "invMsgAddOnText":"", "currencySymbol": "$", "styleImgUrl": "https://media.musiciansfriend.com/is/image/MMGS7/Les-Paul-Special-Vintage-Edition-Electric-Guitar-Ebony/J40301000002000-00-140x140.jpg", "styleImgAlt": "Les Paul Special Vintage Edition Electric Guitar Ebony", "freeGiftWarning":false, "freeGiftWarningTips":"", "isShipsInternational": true, "pdpLoyaltyPoints":"1,192", "pdpLoyaltyPointsMultiplier":"1.0", "checksum":"93895071200", "restrictionType":"", "restrictionError":"" }
Ribbon mics exhibit a figure-of-eight pickup pattern. One useful close-mike application for achieving heavy rock sounds involves a ribbon mic (or large-diaphragm condenser set to a figure-of-eight pattern) aimed toward the center of the speaker, with a cardioid dynamic mic angled next to it at roughly 90°, aimed off-center, with the capsules almost touching. Record the mics on separate tracks, and with proper balancing the sound should be powerful and frequency-rich.
As Jay Verkuilen, has already noted here (no pun intended!), be careful not to hammer too hard on the unplugged guitar as you can be fooled into thinking you have to play much harder that you really do. Fretboard exercises & scales, practicing chord forms, and the like while unplugged is beneficial to your playing, "muscle memory," and aids your relationship with your housemates and neighbors.

If a love of flamenco and salsa music sung by the Gipsy Kings brought you to the best classical guitar, then you are going to want to read this review. The Cordoba company, as you can now see, has quite the reputation for quality guitars, and their GK Studio Negra left-handed model—a Gipsy Kings signature instrument—could easily be the right one for you (no pun intended).
It is a German company that manufactures bass guitars. Making a really good bass guitar is a difficult task. However, Warwick bass guitars have really mastered this daunting task. The growl of the bass, and its hollow and beautiful resonating tone is a striking feature of the bass. The company employs stringent quality control methods in wood seasoning, cutting, and resonance engineering. It is highly regarded among bassists and has attracted many notable artists like Robert Trujillo (Metallica) and Adam Clayton (U2). One of the greatest things about Warwick is that they manufacture guitars for everyone, from amateur hobbyists to professional players. If you are new into electric bass guitars, then Rockbass Corvette Basic and Streamer Standard Electric Bass guitars are great options for a rocking start.
PRS, or Paul Reed Smith, guitars are a high-end luxury guitar brand that broke into the rock and roll scene in the 1980s. Famous guitarists such as Trent Reznor and Vince Neil could be seen wielding these beautiful instruments. In fact, that’s probably one of the first things you’ll notice about PRS guitars. They are absolutely stunning. They use high quality wood and only use the best cuts whether it’s their cheapest or most expensive models. Even the slightest imperfections are too much for PRS. Another aspect of PRS to take note of is how they have evolved over the years. PRS is not afraid to evolve their models and most, if not all, of their models have seen changes. They take time and effort to find mistakes in the older models and improve them. From pickups to the neck shape, PRS will change it if they feel they can improve it.
Regarding truss rods, all vintage Martin instruments post-1934 have *non-adustable* truss rods (T rod). This means the neck better be straight, otherwise an expensive repair will be in order. To check neck straightness on a guitar, first tune the guitar to pitch. Then hold the low-E string down at the 1st and 14th frets. Note the distance between the bottom of the low-E string, and the 7th fret. You should be able to put a medium guitar pick in this space. Any more, and the neck is "bowed". Any less, and the neck is "back bowed". Repeat this with the high-E string (the same results should be seen; if not, the neck has a "twist" to it).
The lower strings of a guitar (E, A & D) will often have a nickel winding over their steel core. Nickel also makes an appearance in the frets of most guitars, which are commonly made from nickel-silver. Despite the name, this alloy doesn’t actually contain any silver, but is named for its silver appearance. It’s actually an alloy of copper, nickel, and zinc. These nickel-silver frets aren’t as hard-wearing as steel, so some guitar manufacturers use stainless steel instead to give the frets more longevity.

When two sine waves with frequencies A and B are ring-modulated, the output will also contain the frequencies A+B and B-A. If frequency B is not a multiple of A, these additional frequencies are inharmonic; e.g. ring-modulating sine waves at 1000Hz and 1250Hz will add the frequency 2250Hz, which is neither a multiple of 1000Hz, nor of 1250Hz. When more complex sounds are ring-modulated, sums and differences of all the harmonic frequencies are added.

Fractal Audio is a relatively small company that competes directly with the world's biggest amp modeling and effects manufacturers. They built their reputation on the quality of their premium priced guitar processor called AxeFX, but has since expanded into relatively more affordable territory with the AX8 and FX8. Of the two, the FX8 gets our pick because of its incredible balance of quality, complexity and practicality. It is also fits this list better because it is a true multi-effects "only" unit, so there's no amp modeling feature to get hung up on.
Because of the way the guitar is tuned and the amount of spread between the notes of each individual strings chords are voiced in certain very particular ways. These voicings are physically impossible to imitate on a keyboard, at least with any reasonable amount of facility. Conversely, keyboard voicings are generally unplayable on a guitar, as you'd have to be playing more than one note on a single string in many cases.

Ibanez is a Japanese music instruments manufacturer that has produced some of the most iconic guitars of the 20th century. Established in 1908, the company started to design the first guitars in 1957. Ibanez was one of the first companies to gain popularity in the US and Europe markets. It also was the first to mass-produce 7- and 8-string guitars.
In 2007, Gibson announced the idea to create a computerized Les Paul, dubbed the “Robot Guitar” which was released on December 7, 2007. The guitar has a computer integrated into the body with a “master control” knob next to the volume knobs, which can be pulled out, turned, or pressed to issue different commands to the guitar. One of the more notable features is the ability to tune the guitar to standard tuning simply by pulling out on the master control knob and strumming the guitar, while the tuning pegs adjust themselves to standard tuning. Another use of the master control knob is to be able to tune the guitar to alternative tunings, such as drop D, by pressing on the control knob to fit the setting. The new Les Paul has a new custom silverburst blue finish.[30] While the product was advertised in the American popular press as a “world’s first”, similar systems, some external, have been in use for decades.
Increasing the bass and treble while reducing or eliminating the centre midrange (750 Hz) results in what is popularly known as a "scooped" sound (since the midrange frequencies are "scooped" out). Conversely, decreasing the bass while increasing the midrange and treble creates a punchy, harsher sound. Rolling off all of the treble produces a dark, heavy sound.
Determining the phase of pickups: attach pickup leads to an ohm meter, and then tap on the pickup with something metal, note direction the meter reading moves. Also note which wire is attached to the red test lead. Attach the nect pickup to the ohm meter, and tap on it. If ohm meter reading moves opposite of the direction it did for the first pickup, reverse the leads. When the meter reading moves the same direction, not which wire is attached to the red lead. it is the same as it was for the first regardless of it's color (i.e."hot" or "ground")
5. Marshall Code 50 1x12 Digital Combo Amp ($249.99): Marshall is the household name of the amp industry and their inclusion on this list was a definite must. The Code 50 boasts more than 100 presets in an easy-to-transport package. As with most of the amps on this list, the Code 50 also includes a mini USB plug-in for ease of recording, headphone capability for practicing late into the night, and even an aux input for jamming along with music on your smartphone. You can even control it directly via Bluetooth and the mobile app. It also delivers 50 watts through a 12-inch speaker so it’s great for practice or rehearsal.
Jazz – Does no-one listen to Eddie Lang’s recordings? Or that master of comping, Freddie Green? To Charlie Christian? MarleyIII gets special credit as the only one naming the marvellous Jim Hall, who really should be up there in one of those ten spots. Like Marley, I really like the work of John Abercrombie, although I can’t put hand on heart and suggest him for the top ten. If you like John A, let me put in a plug for the work of London session-man John Parricelli. (Which reminds me that the very different “Johnny A” is no slouch either!)

Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 42mm - Fingerboard: Rosewood - Frets: 24, Jumbo - Scale Length: 25" (64cm) - Headstock: 3+3 - Bridge: Earvana - Bridge Construction: Rosewood - Hardware: Chrome, Grover Tuners - Circuit Type: Active - String Instrument Finish: Brown Sunburst
Many guitarists have chosen this iconic axe for its versatility and capability to sound great in any genre of music, but the Les Paul is most widely known for its heavy duty rock ‘n’ roll vibe.  A great example of this would be Jimmy Page of Led Zeppelin fame.  Once Page began using Les Pauls, he never looked back and helped to give the instrument its indelible place in the history books of music.
Description: 2014+ Model. Body: Maple - Flamed - Top Wood: Maple - Flamed - Neck Attachment: Set - Neck Wood: Mahogany - Nut Width: 43mm - Fingerboard: Ebony - Frets: Medium - Inlay: Pearl & Abalone Block - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Gotoh 510BN - Bridge Construction: Ebony - Cutaway: Double - Hardware: Gold, 2x Volume Control, 2x Tone Control, 3-Way Switch - Circuit Type: Passive - Pickups: Super 58 - Pickup Configuration: H-H - String Instrument Finish: Vintage Yellow Sunburst - String Instrument Accessories: Hardshell Case - Made In: Japan
Position 4 (inner coils, parallel connection): This is similar to position two just inverted. Pole 1 connects bridge pickup coil tap to the output through pole 2. Pole 3 grounds neck pickup coil tap and pole 4 connects neck pickup hot lead to the output. That leaves us with bridge pickup coil from ground to coil tap and neck pickup coil from coil tap to hot lead. Again, they are paralleled.

Yamaha FG700S: Yamaha makes a lot of guitars that affordable for beginners with decent sound. FG700S is my best-loved. It is a general or versatile guitar, this is very great for beginners who are not very clear what music style they want to learn firstly. The guitar body top is solid Sitka spruce. The solid wood top makes better sound than laminate top. You can check out the price and features of FG700S here.
Cordoba is a fast growing guitar builder that specializes in nylon string acoustic instruments, played by artists like the Gypsy Kings and Bon Iver just to name a few. And with their ever increasing reputation, we find it only fitting to give them a spot on this list, specifically for the impressive quality and tone of the GK Studio. This nylong string guitar incidentally provides a refreshing break from the many steel-string acoustics that are featured here.
Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 24" (61cm) - Headstock: 6 In-Line - Bridge: Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Chrome, 2x Volume Control, 2x Tone Control, 3-Way Switch, Kluson Tuners - Pickups: Harmony Gold - String Instrument Finish: Goldburst, Redburst

Maybe the most well known amplifier released under the Peavey name, the 5150 is the result of a collaboration between Peavey and Eddie Van Halen. Debuting in 1992, the 120-watt, all-tube, two-channel head featured a searing lead channel that helped usher in a new wave of high-gain guitar ferocity in the early Nineties. Since Van Halen and Peavey parted ways in 2004, the model name was changed to the Peavey 6505 and has become an industry standard for modern metal bands such as Chimaira, August Burns Red, All That Remains and others.
The modern era of Ibanez guitars began in 1957 [3] and the late 1950s and 1960s Ibanez catalogues [1] show guitars with some wild looking designs [2]. Japanese guitar makers in the 1960s were mostly copying European guitar designs and some of the late 1960s Ibanez designs were similar to Hagström and Eko guitar designs. Hoshino Gakki used the Teisco and FujiGen Gakki guitar factories to manufacture Ibanez guitars after they stopped manufacturing their own guitars in 1966 and after the Teisco guitar factory closed down in 1969/1970 Hoshino Gakki used the FujiGen Gakki guitar factory to make most Ibanez guitars.
CALIFORNIA CLASSIC models feature superb playability, distinctive looks and an unmistakable Fender vibe. The fully-painted solid Sitka spruce top and natural solid mahogany back and sides, as well as a matching painted 6-in-line headstock and koa binding and rosette, give them an elegant two-toned aesthetic that was made for the stage. California Special and California Classic acoustic guitars are equipped with a Fender- and Fishman-designed PM preamp specifically tuned to complement the unique shape and voice of each instrument—complete with tuner, frequency and phase controls.
So just to throw this out there- I've been trying to figure out how to set up electric guitars on my own for years and could never get it remotely figured out. At about 11:30 pm last night I decided to take a garbage fret buzzing machine of a guitar and try again. Your blog is the first time I've comprehended and successfully set up a guitar!! I'd buy you a six pack if you were in the neighborhood!
In a very basic sense, your pickups create a magnetic field that is disturbed when guitar strings are vibrated above it. This, in turn, converts the vibration of the guitar strings into a current. The current is then sent through to your output jack where the signal then passes through your lead into your amplifier, where it is amplified. Different gauge strings vibrate at different rates e.g. an A string will typically vibrate at 440 cycles per second (440 hertz) which creates a current of 440 hertz in the pickup.
It's important that an acoustic guitar feels comfortable for a beginner guitarist. How a guitar feels may vary from player to player. Is the fretboard easy to play? Is the body of the guitar the right size (hopefully not too big)? An acoustic guitar with too big of a back-end may cause irritation to the inner side of the strumming arm. Also, make sure the fretboard is flat and there is no buzzing. Are the tuning heads easy to turn? And make sure the strings are not too high off of the fretboard.
The guitar is very light in weight and pretty resonant. At this point they were hard-wiring the cord right into the guitar with a nifty spring strain relief on the plug. This guitar has a brighter sound than my Gretsch and I probably prefer it for ultra-clean work because it has that vintage "thang" going on that some call "mojo." I am, however, trying to get the driven sound sorted at this point because of all the overtones. Now I know what sort of sound the Telecaster bridge pickup was based upon!
Lawsuit Takamine F375s Hand built in Japan and still in excellent vintage condition! Build type is Rare Exotic Tone woods series Jacaranda Brazilian Rosewood back-sides-fingerboard & headstock overlay JUST Gorgeous. Its workmanship is really top shelf by any standards, We installed and set up with Martin Marquis 80/20 strings 12's, as well as setting this guitar up with a New bone nut & saddle, Condition is very good with a few minor hard to see scratches on its back you have to look closely sometimes at an angel ( clear coat only not threw to wood ) general play here and there as any 37 year old guitar that has been played would get... dinks and such but nothing major to detract from its obvious outward beauty, This example has an excellent neck its 1-11/16th's at the bone nut, fingerboard is very good as are the frets at 90%, its straight and has a nice meaty feel, has the Martin design detail of the Diamond Volute on back, original tuners are excellent as well, a warm vintage vibe to this 37 year old vintage Gem. Tone is rich with good volume she Sings well!!! JVG Rated 9/10 higher if it wasn't for the few minor clear coat scratches in its clear coat not to the wood that I can see more like swirls and such may be possible to fine grade 3000 wet sand and polish out its possible if it doesn't sell soon when I get the chance I'll do it, its a commitment because it may not sand out alone it may require a few thin clear lacquer applied and buffed out to cure it forever if so a guitar of this caliber deserves the attention.. ( the price will go up after I do that work ) and that really doesn't have to be done to make this guitar just very good -excellent vintage it would bring it very close to mint!.... aside from the few minor scuffs this guitar still qualifies as vintage excellent right now, just thought I would point those out. So to be clear about this listing the way you see it now is the way it is offered.Its a F375s and not the EF375s yet This guitar has a factory installed transducer type pickup installed and it sounds wonderful, Its said to have been installed by original owner in Tokyo by Takamine shop its a very clean job I call it CLEAN where they do not make extra unnecessary holes for output jack instead they use the END PIN hole and its a combination strap pin and or output jack, So this guitar is either Acoustic or Electric really nice in deed in SUPER Condition well above average. This beautiful instrument comes with its original hard shell case it to is in very good vintage condition its heavy duty molded type with plush black interior all functional fully. This is the total package. Contact Joe to buy: jvguitars@gmail.com .
Eric Clapton: select alder body with a special soft V-shaped maple neck/fretboard, 22 vintage-style frets, three Vintage Noiseless pickups, 25dB active mid-boost circuit and a “blocked” original vintage synchronized tremolo. Available in olympic white, pewter, candy green, torino red (Artist Series), Antigua burst, gold leaf, EC grey, daphne blue, graffiti canvas, mercedes blue, black and midnight blue (Custom Artist), as well in olympic white, torino red and pewter with a “Thinskin” nitrocellulose lacquer finish (Custom Thinskin Nitro).
RACING STRIPES Once you have checked out the color coat and are satisfied with the results and have let it dry completely, you can move straight to clear coats or add some racing stripes... or any other design you feel comfortable painting on. I did a paint splatter on the guitar I'm currently working on and it looks awsome. Plus it was realy easy. I just sparyed some black laquer paint in a pan, dipped a brush in it and splattered it on to my liking. For racing stripes make sure you get auto masking tape so you don't get any bleed through when you paint. Decide where you want you lines to go and tape them off. Use a garbage bag to cover the rest of the guitar and make sure all the other areas of the body are covered and taped off to prevent any unwanted spray from getting on the guitar. Spray just enough coats of paint to cover up the base color. You don't want it to be too thick because you will lay daown a clear coat on top and wet sand to level out the finish. If it is too thick it will take much more coats of clear and more sanding than you will want to do just to level it out.

There’s 2 very small and cheap amps that are widely used by guitarists and by guitar technicians across the globe and the Marshall MS-2 Micro Amp is one of them. The other is number 2 in our list, before you ask… This tiny 1-watt Marshall amplifier may fit in the palm of your hand, but it sure packs a punch and is a LOT louder than you’d expect. Styled just like the classic Marshall amplifier stacks now synonymous with rock n roll, this is one of the best cheap amps thanks to its convenient size, 9V battery powered operation for ultimate portability and the fact you can plug your guitar into it and rock out anywhere you like.
Anytime a single coil-sized humbucker is split, a tiny coil is the one seeing the strings, so the volume is going to drop. You can split to the other coil, or set the switch to wire the pickup in parallel, which will keep it hum cancelling. However, splitting to the other coil in a neck position Cool Rails probably won’t be a big difference in sound since the coils are pretty close together and pretty small.
At first this may seem trivial, but a little experimentation reveals that each effect reacts very differently depending on how the original signal has been altered by previous effects in the signal chain. Initially, this can seem rather frustrating; a pedal that sounds awesome on its own can turn your sound into a real mess when combined thoughtlessly with other effects. I’m going to go into the basics of signal flow and cover the fundamentals of setting up a great sounding pedal board. As you would expect, there isn’t any one “correct” way of doing things. You may find that changing the order gives you a completely unique sound, and that’s great. However, if you’re sorting it all out for the first time, this is a good way to start ordering your pedalboard.
For 10" speakers, the most common combo amp and speaker cabinet configurations are 2x10" and 4x10". For speaker cabinets, 2x10" and 4x10" are the most widely used, although 8x10" cabinets are used in stadium concerts, especially in louder rock genres. Other configurations with 10" speakers do exist, but they are less common. For example, there are a small number of 1x10" and 3x10" combo amps and speaker cabinets, and a small number of 6x10" cabinets. Bass speakers are usually made with stiff paper cones. Hartke combo amps and speaker cabinets are unique in that the cone is made from paper, except for the middle, which is made of aluminium. Gallien-Krueger's MB210-II combo amp uses ceramic speakers.
What makes it truly stand out is the infinite Reverb this pedal provides. If you’re looking to get an all-around “stomp-box” featuring everything you ever wanted with remarkable sound output, this work of art by EH is designed to make you never think about getting another Reverb pedal. It can fit in any form of setup, and it is destined to conquer your flavor.
I've got a vox white shadow too though its a crimson/red colour with 2 chrome plated humbuckers, it has one volume pot, two tone pots, 1 toggle switch aswell as 2 further switches to change between pick-ups. It has stamped on the back neck plate "made in japan" I can't seem to locate the serial number though. Would love to know more about this guitar.

Next up is another electric guitar from Fender Standard, namely the American Special Telecaster. This one has two Texas Special Tele pickups and it’s perfect for great American genres like country, rock and blues. This American Special Telecaster has a lovely alder body and the neck is maple. Just like number one on our list, the 50’s Stratocaster, it’s vintage-looking, but the Vintage Blonde model we’re reviewing looks vintage in a cooler, less sentimental way.


For example, if you plug into a .7V power amp and you get good sound – great! However, if you plug into a 1.25V power amp and find the signals are weak, it’s not the tonal lack of the power amp that’s the problem. The preamp signals are too weak to be driven to the powerful 1.25V power amp. The issue is the sensitivity input of the power amp is too high for the preamp to be driven well.
I’m super excited for this post as it’s the culmination of some of the biggest names in online guitar lesson providers coming together to offer their advice and insights on guitar chords. Understanding the right way to play guitar chords is one of the first things you’ll learn as a beginner guitar player. It can also be quite frustrating when you are just starting out.That’s why I decided it would be a great idea to get a bunch of experts together all giving their insight into learning more about the wonderful world of guitar chords. I basically asked everyone two questions:
{ "thumbImageID": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "defaultDisplayName": "Fender Kurt Cobain Jaguar NOS Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst Rosewood Fingerboard", "sku": "sku:site51398177063833", "price": "1,224.99", "regularPrice": "1,224.99", "msrpPrice": "1,225.01", "priceVisibility": "1", "skuUrl": "/Fender/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard-1398177063833.gc", "skuImageId": "Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "https://static.guitarcenter.com/img/cmn/c.gif", "assetPath": "https://media.guitarcenter.com/is/image/MMGS7/Kurt-Cobain-Jaguar-NOS-Left-Handed-Electric-Guitar-3-Color-Sunburst-Rosewood-Fingerboard/J13430000001001-00-60x60.jpg", "imgAlt": "" } ] }
Some great IR's by Redwirez are available for free at their website as some kind of 25th anniversary thing, and if you use windows you can use VSThost as your "DAW" although all it does is host plugins. It's great because it loads so much quicker than a full DAW and doesn't have all the tricky options that just distract you from playing guitar. Like a real amp, it's plug-n-play (after setting it up, of course--- you'll want to set the sample rate to 192khz so that you can get ~8000 samples a sec with oversampling at 4x on each plugin). It can record, too, so it's a really easy, simple solution. Of course, you'll need a real DAW to mix and master.
Description: Body: Mahogany - Body Construction: Solid - Top Wood: Maple - Quilted - Neck Attachment: Set - Neck Wood: Maple - Fingerboard: Rosewood - Frets: 22 - Inlay: Mother Of Pearl - # of Strings: 6 - Scale Length: 24.75" (63cm) - Headstock: 3+3 - Bridge: Custom - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Diecast, Gold, 2x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: Humbucker - Pickup Configuration: H-H - String Instrument Finish: Black, Red
Categories: Guitar manufacturing companies of the United StatesGuitar amplifier manufacturersManufacturing companies based in ChicagoManufacturing companies established in 1890Companies disestablished in 19681890 establishments in Illinois1968 disestablishments in IllinoisDefunct companies based in IllinoisMusical instrument manufacturing companies of the United States

This extremely limited Marshall 1936V 2x12 Silver Jubilee Guitar Speaker Cabinet has been created to get the best sound out of your Silver Jubilee heads, most notably the 2555X and 2525H Mini Silver Jubilee tube amp heads. The Silver Jubilee styling looks great on stage and the 2 x 12” Celestion G12 Vintage 30 speakers provide you with all that gorgeous amp tone – perfect for 1980s/1990s hard rock.
Ah, this is an interesting subject. I could never play a Rick, nor buy back my 1966 Fender XII, so I bought a Dano, then another which I kept and could play (nut width). Then around 2000 I bought a Yamaha Pacifica 12 -the blueburst with gold hardware. I had the nut intonated, like all my other guitars (this was before Earvana which I am about to try out my first "drop in" on a new parts Strat, Epi Night Hawk and a GS Mini on layaway). The Pacifica is good tho again only 1+11/16ths " and I am ready for 1+3/4 or even better 1+7/8ths. I bought a set of Duncan Designed lipsticks for it, thinking I could easily find a neck with 1+7/8ths nut. No joy, yet, tho I have talked to a builder about one and am trying to sort out whether to do that to the Pacifica or use a really nice looking cherry stained strat body that I've had for 31 years.
Initially inspired by his older brother Jimmie, Stevie picked up the guitar at an early age and was playing in bands by the time he was 12. By the time he formed his legendary trio Double Trouble in 1980, Stevie Ray Vaughan was already a legend in his adopted hometown of Austin, Texas. After hearing and seeing Vaughan playing at Switzerland’s Montreux Jazz Festival, pop icon David Bowie invited Stevie to play on his Let’s Dance album. Vaughan’s career took off form there.

The old Harmony and Kay guitars were notably inferior in playability and sound to professional-grade instruments by Martin, Gibson and Fender. Typically the necks on the student grade instruments were clumsy in contour compared to a professional-grade instrument, and generally the action was much higher. Neckset angles on student-grade acoustics were often quite poor on Day One such that they were physically hard to play when new. By the time they were ten years old, the neckset angles had often shifted so much that they were virtually unplayable. While today many craftsmen are very adept at resetting necks, in the mid 1960s no one I knew had mastered techniques for doing this. Even companies such as Martin and Gibson did not reset necks if guitars were sent back to them for warranty service. Martin's typical approach at that time was to plane the fingerboard, such that it was virtually paper thin by the nut and full thickness by the body joint, and then refret. Gibson would frequently tackle such a problem by sawing the neck off at the heel joint, chopping the remainder out from the dovetail with a chisel, and installing a new neck. Student-grade instruments with poor necksets frequently were simply thrown away. Truss rods in student grade guitars usually were little more than window dressing. Although many of these guitars bore labels reading "steel reinforced neck" or actually had a truss rod in the neck, these rods usually were not functional. Martin had a steel T-bar in the neck from late 1934 through the 1960s, and Gibson and Fender both had highly functional truss rods, but Harmony, Kay and other makers of student guitars usually installed rods so poorly that any attempt to adjust the rod was simply an exercise in frustration and futility. While Harmony and Kay as well as some other makers turned out many hundreds of thousands of guitars and greatly exceeded the number of instruments produced by Martin, Fender and Gibson combined in those days, a surprisingly small percentage of those instruments have survived over the years, such that good condition original examples are remarkably scarce today. Some of these instruments have become quite collectible and now bring prices exceeding $1,000. Kay hollowbody electrics with the so-called "Kelvinator" peghead, especially the early Barney Kessel models, are now considered to have a considerable "cool factor." Likewise, original Danelectro "longhorn" guitars and basses have a visual flare as well as a funky distinctive sound of their own.
This model offers the pretty standard budget Stratocaster experience, with the bright, open tone of alder as the body wood. It comes in two configurations, S-S-H and H-H, and given that the humbucker is the star, you might opt for the H-H version, especially because it comes with a coil tap. It’s a solid guitar and should give you everything you need for short money, minus the frustrations of a lot of cheap guitars out there. If you’re just starting out, you could also go cheaper with the PAC112J, but you have to give up the coil tap.

Open Monday-Friday from 8 a.m. to 4:30 p.m., the Visitor Center showcases a diverse selection of Taylor guitars, including standard models and seasonal limited edition offerings, for players to enjoy. To enhance the playing experience, two sound rooms are equipped with amplifiers, enabling players to plug in and play in a private environment. The Visitor Center also houses the Taylor Guitars store, where guests can purchase items including guitar parts and accessories, along with Taylor-branded clothing and other items from the company’s TaylorWare line.

We specialize in the repair and restoration of stringed instruments and Guitar repair in Nashville, and the surrounding area. Our services provide for stringed instrument repair and maintenance  of all makes and models.  We also sell stringed instrument related accessories. Contact us for all of your repair and restoration needs. We love rescuing injured instruments, and helping them make music again.


For under £400 you get a set of Paul Gagon-Designed Alnico Pickups which provide a massive sound ranging from smooth and cool surf rock to all out grunge distortion. The AW4470B humbucker in the bridge position is complemented by an AP4285B P-90 neck pickup which ensures you have an array of tones at your fingertips – ideal for clean and distorted amplifiers. The addition of a push/pull coil tap allows you to split the humbucker so you can enjoy the classic sounds of a single coil. A mahogany body and maple neck provide the resonance, depth and snap you need for a wide range of tones and the G&L Saddle Lock Bridge with its six individual saddles offer incredible intonation as the saddles actually lock onto the strings.
A rackmount effects unit may contain an electronic circuit nearly identical to a stompbox-based effect, but it is mounted in a standard 19" equipment rack, which is usually mounted in a road case that is designed to protect the equipment during transport. More recently, as signal-processing technology continuously becomes more feature-dense, rack-mount effects units frequently contain several types of effects. They are typically controlled by knobs or switches on the front panel, and often by a MIDI digital control interface.
×