Guitar amp and FX plug-ins are very advanced nowadays to the point that you can actually record “clean” by plugging your guitar straight into a mixer or interface, and add a plugin like Guitar Rig, Amplitube or Waves GTR as an insert. You will hear this effect as you play but without any risk of feedback, since no mics are live in the room. This approach also means you can tweak and change any aspect of the sound post-recording since the raw recording is actually completely dry.

The Dunlop Cry Baby is a classic example of a great wah pedal. This pedal adds a ton of texture and nuance to guitar solos, and can also be used to create some very funky ‘70s-ish effects. A wah is essentially a controllable frequency filter. By manipulating the pedal you can change your tone from treble to bass and anywhere in between. This control is part of what makes the wah effect so popular.
This guitar is awesome. If you are on the fence, get off and buy it. It's beautiful and sounds awesome. I'd give it 10 stars if I could. The tone is so much better than my old acoustic. All mahogany I love it. Looking forward to years of getting better with this beauty. I have zero negative to say. Had it a few months have played everyday. I hate to leave it to go to work. Wish I had all day to play it.
by pedalhaven This little board from  @andshamlian  is so sick! Don't forget to DM/Tag us to submit your photos! ▪️ ▪️ ▪️ ▪️ ▪️  #pedalhaven   #pedalboard   #guitarpedals   #knowyourtone   #ambienttones   #pedalboards   #pedalnerds   #pedalporn   #guitar   #gearporn   #gearnerds   #pedalboardpeople   #shoegaze   #geartalk   #guitarsdaily   #gottone   #tonefordays   #guitargear   #reverb   #gearpost   #boardshot 
Once The Beatles became tied to Vox amplifiers (a deal was struck early in their recording career whereby they would be provided Vox equipment for exclusive stage use), the quest for more power began. John Lennon's first Vox was a fawn-coloured twin-speaker AC15, while George Harrison's was a fawn AC30 with a top boost unit installed in the rear panel. They were later provided with twin black-covered AC30s with the rear panel top boost units. Paul McCartney was provided with one of the first transistorised amplifiers, the infamous T60, which featured an unusual separate cabinet outfitted with a 12" and a 15" speaker. The T60 head had a tendency to overheat, and McCartney's was no exception, so he was then provided with an AC30 head which powered the T60's separate speaker cabinet.

When it comes to guitar amplifiers, especially the ones that we love here at PMT, “cheap” doesn’t mean poor quality! Thanks to huge leaps in manufacturing processes, stringent quality control and the fact brands really care about the products they create, you can spend far less on an amplifier and musical instrument these days and still get a fantastic, highly playable and superb quality option for your needs.
Description: Body: Alder - Body Construction: Solid - Neck Wood: Maple - Frets: 24 - Inlay: Dot - # of Strings: 6 - Headstock: 6 In-Line - Bridge: Floyd Rose Style Locking Tremolo - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, Diecast - Pickups: Humbucker - String Instrument Finish: Black Metallic, Pewter Grey Metallic, Emerald Green Metallic
Nothing says rock and roll quite like an electric guitar—and whether you're just learning to play or you've been practicing for years, the right instrument can make you feel like a rock star. Selecting the right match for you is a matter of personal taste and playing style, but the broad selection available at Amazon.com can help you find the guitar and the accessories you're looking for.
{"reportSuiteIds":"guitarcenterprod","pageName":"[gc] product comparison","prop2":"[gc] product comparison","prop1":"[gc] product comparison","prop5":"[gc] product comparison","prop6":"[gc] product comparison","prop3":"[gc] product comparison","evar51":"default: united states","prop4":"[gc] product comparison","channel":"[gc] product comparison","linkInternalFilters":"javascript:,guitarcenter.com"}
The Squier Bullet Strat Hard Tail Brown Sun Burst is a fantastic option for beginner guitarists out there and those who need an affordable budget friendly option for recording or practising. This guitar makes our cheap electric guitars that don’t suck list thanks to its high-quality basswood body and comfortable “C” shape profile on the neck that is super comfortable to play. This high-quality guitar also includes a set of three standard single-coil strat pickups allowing you to mix up your sound via the 5-way pickup selector. Solid, chrome hardware and a hard tail bridge for added resonance finish off the guitar nicely whilst the budget friendly price tag makes it affordable for everyone. A Fender Stratocaster style guitar at a fraction of the cost.
Steel-string Acoustic Guitar The steel-string acoustic guitar is a modern form of guitar that descends from the classical guitar, but is strung with steel strings for a brighter, louder sound. The most common shape is the dreadnought (originally developed by C.F. Martin & Company), which incorporates a deep soundbox and a smaller and less pronounced upper bout, giving it a wedge-shaped appearance. Other popular body styles include the larger jumbo body shape, as well as the smaller auditorium (000) body style and even smaller grand concert (00) body style. Check out the Martin Ed Sheeran X Signature Acoustic Electric for a smaller body type with a punchy sound.
Those of you familiar with Van William’s former bands Waters and Port O’Brien, will have suspicions about what to expect from the songwriter’s debut solo material: boisterous, vibrant hooks that are easy to swallow but gut you on their way back out.  His latest incarnation represents a bounce back after a period of personal tumult. Two parts power pop bombast, to one part Americana, William’s maturation as a songwriter and guitarist seems to have hit a new high water mark.

Some of the different aspects of the SG include its much thinner double cutaway body that offered players easier access to the higher frets.  This model is also significantly lighter than the Les Paul and was preferred by many players who wanted the heavier tonal offerings without the back and shoulder pain that can come after a 3 hour gig with a Les Paul.


In addition, there were other assessments. I went to Guitar Center to buy an amp. I was playing my guitar through a vintage tube amp when I noticed a man standing behind me. I said, “It sounds good.” He said “It sounds really good, are you going to buy it” as he pointed at my guitar. It was then I realized he was a customer and was interested in buying my guitar.


What would happen if four former Marshall employees got together? Well in this particular case, they formed Blackstar! Their product range includes hand-wired amps (the Artisan series) as well as products featuring different digital technologies (the ID:series). Plus, we have them to thank for the existence of the ISF system, a control that allows to switch gradually between American and British sound. In spite of the company's young life (it was founded in 2004), the brand already has many artists associated to its name like Silenoz (Dimmu Borgir) and James Dean Bradfield (Manic Street Preachers).
Residing between your guitar and your amp, your effects pedals make it possible to change up your sound between songs or even verses. A pedalboard makes it easier to manage and transport all those stompboxes. The longer your effects chain, the more helpful a pedalboard becomes. Keeping all your pedals in one place, a pedalboard helps you stay organized and keeps your effects layout consistent.
2. Materials. The timbers used to make these guitars were sourced from every corner of South East Asia. These timbers were “old growth”; in plainer words, the timber was taken from established forests. The advantages of this type of wood are long term stability and strength. Further to this, many of these timbers were species that are now on the endangered list and are therefore illegal to log and/or export. Now, while we consider the cutting down of established “old growth” forest timber a crime, it would be an even bigger crime not to make the most of what is already there. Whilst the build quality of the modern Asian made guitar (i.e. China, Indonesia, Vietnam etc) is exceptional, most of the timbers used are “plantation” timbers or more overly “new growth” timbers. Though this forestation is certainly light years ahead ecologically, it tends to yield timber which is brittle and can be unstable, making many repairs, such as a broken headstock untenable.

Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.
Some big ideas there Mike! Not too sure about copper wire being magnetised though, last time I checked that was only ferrous materials… As for grounding, you should check out the “star-grounding” scheme described over at GuitarNuts: http://www.guitarnuts.com/wiring/shielding/shield3.php Some great info on that site, you should have a browse around!
There are two main types of amplifier: valve and solid state. Solid state guitar amplifiers tend to be cheaper and lighter, but they don't offer as good a sound as valve amplifiers. Valve ones, on the other hand, have working parts, so they're a little more maintenance heavy. Most serious musicians go for valve amplifiers due to the superior sound and lower wattage requirements.
Strumming Patterns: Rhythmic strumming patterns are rarely coupled with delay.Chords: In some cases, swelling chords that are strummed once can work well with a delay effect, but generally this is avoided in favor of a less-saturating effect, perhaps a kind of light modulation.Short Arpeggios: A five to 10 note arpeggio is the perfect spot to dial in a smooth delay to help fill in the sound.Quick Solos: Speedier solos can work with delay and make sense, but the faster you’re playing, the harder it is to get delay to sound clean and not muddy.
In the ever-changing world of jazz music, you shouldn’t be surprised to hear of some big changes to the jazz guitar market either! To reflect this we’ve tweaked our chart, removing a couple of models such as the Ibanez AF95FB and the D’Angelico EXL101, and adding five new six-strings. These comprise the faithfully reproduced Epiphone Masterbilt Zenith Classic and the thinbody LH-302T from The Loar. In the semi-hollow section, we added the Ibanez AM93AYS Artcore Expressionist and the beautiful Hagstrom Tremar Viking Deluxe, while the solid-body section saw the arrival of Fender’s Classic Player Jazzmaster Special.
Ibanez, a guitar and bass manufacturer, came to prominence as a result of music legends like Steve Vai and Joe Satriani using this brand. These guitars provide an exceptionally uniform neck action, a highly versatile tone, and top of the range pick up configuration. One of the main reasons that this brand gained popularity was the effective tone from cheap and mass-produced instruments. Heavy music is what they excel in, and metal enthusiasts have been loving Ibanez for decades now. They manufacture guitars for every style and genre. The most iconic model is the RG, but S series is also loved by all. They are also the makers of the 7-string guitar, with the first model Universe being made in the year 1990.
I have an old Montclair that my uncle modified. He told me that is a '52 but the info here dates it as '60-62 if I remember correctly. I just registered over at the forum, I thought you guys might get a kick out of seeing this guitar. My uncle stripped almost all the paint, there's a bit under the bottom of the neck just to show how it was. He added a hand carved bridge and custom binding on the backside. Also there are a few other unique mods. I really am interested to see what you think about this guitar. It is my main player and has been for years now, an amazing sounding punchy guitar. Hopefully I'll be able to post up some pics at the forum. Cheers! -Gabriel-
Since 1977, Dean Guitars has been a leading guitar company manufacturing the highest quality electric guitars, acoustics, and bass guitars for musicians of all ages and at all price ranges. From guitar legends to beginners, we offer a choice for any music genre or style. Browse guitars and more all packed with a limited life-time warranty. Get Your Wings today!
Made most famous with the release of Bon Jovi’s 1986 Top 10 hit song, “Wanted Dead or Alive,” Richie Sambora’s double neck Ovation became one of the world’s most instantly recognizable guitar models. The all-new acoustic/electric Richie Sambora Signature Series Elite Double Neck model features a Sitka Spruce top in Gloss Black, Ebony fingerboard inlaid with mother of pearl stars, Teak/Paduk/Walnut/Mesquite inlaid rosette/epaulettes, gold hardware, a mother of pearl star inlay on the body and finished with Sambora’s signature in gold on the headstock.
Efficiency – also called sensitivity this is measured in dB at a distance of one metre. This has more to do with how loud a speaker sounds than its power rating. A Jensen P10R, for example, is rated at 95dB; a Celestion G12 65 at 97dB and an EVM12L at 100dB. The numbers don’t look that different, but the difference in terms of perceived volume is truly staggering.

In terms of the Teisco brand, the moving force was Jack Westheimer and his W.M.I. company in Chicago. According to published accounts, Westheimer began importing Teisco-made Kingstons in around 1961, although these were not promoted in the trade press until the beginning of ’64. It was this connection that would make Teisco the dominant powerhouse it was to become.
{"eVar4":"shop: guitars","eVar5":"shop: guitars: guitar value packages","pageName":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","reportSuiteIds":"wwbwprod","eVar3":"shop","prop2":"[wwbw] shop: guitars: guitar value packages","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop1":"[wwbw] shop: guitars","prop17":"sort by","evar51":"united states","prop10":"category","prop11":"electric guitar value packages","prop5":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop6":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop3":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","prop4":"[wwbw] shop: guitars: guitar value packages: electric guitar value packages","campaign":"directsourcecodewb","channel":"[wwbw] shop","linkInternalFilters":"javascript:,wwbw.com","prop7":"[wwbw] sub category2"}


Get used to people staring when you bust out this guitar. Its thinner mahogany body with satin finish delivers killer sounds while also being ridiculously pleasing to the eye. When it comes to tonal diversity, this guitar hits it out of the park. With Super Rock II pickups, you’ll be able to shred crunchy riffs while also being able to switch the pickup to single-coil mode to get those beautiful, clear, resonant tones. To spare you some technical mumbo jumbo, Schecters have hardware that promises to keep your guitar in tune longer, which is always a plus! Grab a Schecter Stealth for just under $500. 

Washburn was founded in 1883 in Chicago. The company was founded by George Washburn Lyon and Patrick J. Healy. Lyon and Healy were sheet music publishers who expanded to musical instruments. The current Washburn guitar company was formed in 1964 when Rudy Schlacher began importing guitars under the Washburn name. Washburn guitars are no longer made in the USA. Lyon & Healy is still in existence as a manufacturer of harps in Chicago.
When looking to buy a guitar, you want to make sure that you’re picking a model that is right for your skill level, playing style, and needs, all that while ensuring that you don’t overspend. If you’re just starting out, there’s probably no need to spend a couple grand on a flashy model when one of the quality cheap acoustic electric guitars will do.
In Vietnam, electric guitars are often used as an instrument in cải lương music (traditional southern Vietnamese folk opera), sometimes as a substitute for certain traditional stringed instruments like the Đàn nguyệt (two-stringed lute) when they are not available. Electric guitars used in cải lương are played in finger vibrato (string bending), with no amplifiers or sound effects.
That hand-built prototype, an anonymous white guitar, had most of the features of what would become the Telecaster. It was designed in the spirit of the solid-body Hawaiian guitars manufactured by Rickenbacker – small, simple units made of Bakelite and aluminum with the parts bolted together—but with wooden construction. (Rickenbacker, then spelled ‘Rickenbacher,’ also offered a solid Bakelite-bodied electric Spanish guitar in 1935 that seemed to presage details of Fender’s design.)

The Kay guitar company's origins date back to the 1890's, starting with the Groeschel Mandolin Company of Chicago, Illinois. The company's name was changed to "Stromberg-Voisinet" in 1921, and shortlyafterwards, in 1923, Henry Kay "Hank" Kuhrmeyer (the origin of the name "Kay") joined the company and quickly worked his way up to the top. By 1928, Kuhrmeyer had bought the company and that same year the company started producing electric guitars and amps.
The RockJam RJEG02 is coming from the hills of RockJam’s successful 15 years of producing some of the best and highly selling brands in the market. This full size, quality guitar contains a whammy bar, a guitar strap, a 10-watt amp, spare strings, electric guitar picks and a gig bag—making it a complete package suitable for the beginner and professional electric guitar player.
Any experienced professional guitarist will tell you there’s usually a big difference between what works on the live stage and what works in the studio. Most discovered early on that the carefully honed live tone they were so proud of just didn’t work on the recorded track, for any of several reasons, or not without a lot of tweaking and readjustment, at least. The first thing you’re likely to discover is that it’s a lot harder to record satisfactory overdriven and distorted guitar sounds than it is to record clean or mildly crunchy sounds, a revelation that often goes hand-in-hand with the fact that big amps tend to be more difficult to record satisfactorily in general.

The guitars included three bolt-neck Strat-style models, the GS-1 (one humbucker), GS-2 (two humbuckers) and GS-3 (humbucker/single/single). Most had locking Kahler vibratos, although at least one GS-3 has been seen with a traditional fulcrum vibrato. The bodies had a German carve relief beginning at the waist and extending forward to the cutaway horns. The necks had 21-fret rosewood or maple fingerboards with dots. The six-in-line heads were kind of squarish and bi-level, with a carved relief along the lower edge, kind of an Ovation trademark. The logos said Ovation Ultra GS. The GS-1 (volume only) and GS-2 (volume, tone, three-way) had pickups mounted on rings on the top. The GS-3 featured a black Strat-style pickguard. One source refers to a GSL model, but nothing is known about what this means, if it isn’t a typo. Most of these came with typical exposed-pole DiMarzios, but the previously mentioned guitar with the fulcrum vibrato also had twin-blade pickups with DiMarzio stenciled on the covers.
While continuing to keep the E string depressed at the first fret, move up the neck from the 12th fret to the end of the fretboard, continuing to depress the string at each of the successive frets. As you move up the fretboard, watch if and how much the distance between the bottom of the string and the top of the frets in the 6-7th fret range changes, if at all. The less the gap rises, the flatter, overall, the neck is. Using this method you may discern that there is more curve in one area than another, and not necessarily centering on the 6-7th fret area. In some cases this curve will be resolved by changing the tension on the truss rod. In other cases, adjusting the truss rod tension will not resolve them, and fret leveling, refretting, or heat bending the neck(rarely) may be necessary.

Jim Root: Featuring mahogany body, maple Modern C shaped neck, ebony fretboard in Flat Black finish, maple in Flat White, 22 Jumbo frets, EMG pickups, EMG 81 in bridge position, EMG 60 in neck position, strings-through-body hardtail bridge, locking tuners, 3-way switch, single volume knob and large headstock.[18] Along with his Jim Root Telecaster, it is the only Fender guitar equipped with EMG pickups as standard.


There’s a 10-watt, eight-ohm Fender Frontman 10G amplifier with a six-inch Fender design speaker that will give you plenty of amplification if you’re learning in your bedroom or apartment. There’s even a two-band EQ giving you more tonal control and a silver-face mesh grill paying homage to Fender’s classic vintage amps. They’ve also thrown in an instrument cable (for connecting your guitar up to your amp), an electronic tuner for keeping things sounding right, a gig bag, a guitar strap, a pick sampler (so you can audition different thicknesses of pick to determine the best for your playing style), plus an instructional DVD to make sure you start your learning off on the right foot.
Can be useful after the distortion pedals to shape the sound, and they can also be used as a boost pedal. Remember that boosting here will increase the signal going into the following pedals, and in some cases this may cause 'clipping' (unwanted distortion if the input to a pedal is too high). I don't tend to use EQ much these days, but this is where I placed it when I did, just be careful with how much you boost.
Unlike the other brands so far, Martin focuses more on the acoustic side of the world of guitars. They offer both acoustic and acoustic-electric guitars. The quality in the wood of a Martin strongly depends on the model you purchase. Their higher-priced guitars feature extremely high-quality wood, but even the lower end models are made of a decent material. Surprisingly, you can even find their lower-end models sporting Rosewood necks. Rosewood is known as one of the best materials to use for guitar necks. When it comes to resonators, on the other hand, Martin has that one in the bag. Most of the top-quality resonators in other high-end guitars are actually made by Martin. That, alone, should be proof enough of the quality of Martin’s resonators. Overall, Martins are excellent quality and are great for honing finger-picking skills. They are known for a warm, sustained tone and a very bright sound.
Guitar picks are really cheap, maybe $.25 to $.50 each. The best way to know which kind you like best is go to a music store and buy $5.00 worth of picks of different thicknesses, sizes and materials, take them home and try them out over the course of the next several weeks or months as you learn to play. There is no right or wrong answer to this question, its all a matter of personal preference. You'll figure out for yourself which you like best.

Among the most common rookie amp buyer mistakes is buying a big amp that's too heavy to gig with, or going the opposite and buying one that's too small. If you're gigging at different places and you don't have a roadie, then consider going with a smaller amp that has DI output so you can go straight to PA with your tone intact. In big venues where big amps are a must, some opt for amp heads because the separated head and speaker cabinet are lighter on their own, although you'll have to move more pieces.
Due to the acoustic, aesthetic and processing properties (workability, finishing, joints) the wood and the ligno-cellulose composites are the most valued materials for the musical instruments' construction. The guitar is made up of a complex structure, formed by a vertical wall in a curve shape (technologically named "sides") and two faces made up of ligno-cellulose plates, so that it should... [Show full abstract]
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
If you are using the bs-16i or similar app try changing the Rx. Channel for say the first 8 channels all to 1. You will then have 8 easily accessible sounds to play at the touch of the Solo/Mute button. You can then mix for instance piano and pads together. Alternatively you could leave the channels 1 to 16 and use channel select to choose your favorite sounds.  To play two sounds together just put them on the same channel. This is handy for pianos where you can add the level of resonance you prefer. When layering sounds with piano choose the non resonance piano versions (available in all the SoundFonts) to avoid lack of polyphony problems.
music is an expression with a variety of feelings involved.there is no such individual as the greatest guitarist.there are however a great number of highly talented,highly skilled and original guitar players.they encompass many genres of style ,technique,they should not be compared with each other.rather they should be appreciated for their individuality and that magnetism that makes them all unique.
Like all Vintage electrics, it comes as standard with Trev Wilkinson designed hardware and pickup. The VS50IIK Vibrato system can take some serious abuse and yet still return to pitch time after time, thanks to the added inclusion of Wilkinson WJ07LH E-Z-Lok machine heads. Meanwhile, the Wilkinson WHHB double-coil pickups provide tight bottom end and crisp highs, perfect for a variety of genres.
Slow Gear – A dynamic effect created by BOSS that swells in volume as if you were riding the volume knob on your guitar. The effect is similar to the envelope of a violin with its ability to remove the “attack” or initial transient of the signal and produce gradual volume swells. The compact pedal version of this effect is discontinued but it is found in both the ME-80 and GT-100 multi effects pedals.
I disagree about Martin being THE BEST ACOUSTIC GUITAR. While Martin is an excellent guitar that is definitely ONE of the best! Taylor is THE BEST FOR THE HIGHER END TO MID PRICE RANGE! A decent TAYLOR will bea Taylor will beat the brakes off a brakes off the same Martin, because they SOUND BETTER and they can be used for more than one or two styles. If you are playing county music the Martin is better, but Taylor will play a lot better sound way better on every other kind of music styl! Buy a TAYLOR
If this is your first time picking up a guitar you may not have seen chords depicted the way they are below. You can find out how to interpret the chords by looking at how to read chords. Each of the chords below shows the chord notation and a picture of a hand forming that chord on neck for your reference. This notation is the common way for showing chords, you may find guitar songs depicted differently elsewhere. This is usually the tablature notation. Here you can find more information on reading tablature notation.
By 1970, however, market conditions were changing rapidly. Japanese manufacturers had greatly improved their quality as well as their range of product offerings. Japanese labor at the time was much cheaper than American, and the imported guitars offered more "bang for the buck" than American ones. In a relatively short time, brands such as Yamaha and Ibanez were outselling Harmonies and Kays. The Japanese guitars had more comfortable neck contours and had truss rods that actually worked. The Japanese rapidly improved the quality of their instruments as well as the variety of their offerings such that by the mid 1970s, Harmony, Kay and Danelectro had all ceased operations, and Martin, Fender and Gibson had eliminated most of the low-end student models from their lines to concentrate on a price range well above any of the Japanese imports. I went to Japan in 1974 and attended a music trade show there as well as visited numerous factories and music stores. I was absolutely astonished at the variety of offerings available. Whereas in 1970 most Japanese guitars were low-end student models which often copied currently available new American products, by 1974 the more progressive Japanese manufacturers were well aware that many vintage American instruments were far superior to the new ones of that time. As a result some of these Japanese manufacturers stared to concentrate on studying vintage American originals. Fuji Gen Gakki and Tokai started producing extremely detailed copies of old Les Pauls, Stratocasters, Mastertone banjos and other vintage American acoustic and electric guitars and mandolins.
hey i have a decca guitar 2 pick ups sight body damage. i bought it for 7 us dollars included amp (amp doesnt work).i put probably 50 dollars into repairs on other thing such as new strings. another repair i made was where the neck connects to the body of the guitar someone unscred that plate pulling the guitar apart shoved "wallpaper or tissue box pieces" in it screwed i back together. i cant find any similar guitars like this in shape. but it has the decca trademark. no model numbers or anything. my guess is someone took a fender body and replaced the neck, becausee the neck doesnt line up with the body. there is 1 tone dial 1 volume control 2 pick ups 6 strings a "whammy bar" which is held up by a thick spring about an inch long. the whammy bar does fold back to the guitar wich caused most of the scratches before i recieved this guitar. please email me if you understand what im saying and have something nice to say especially if it is worth more than $7.50. aain my email adress is nuckthebuck@aol.com. my name is Craig Nuckles.
The objects connected to the red and purple wires are a capacitor and resistor in series. The round brown object is a capacitor, typically around .001 microfarads. The rectangular brown object is a resistor, typically around 150K ohms. Increasing the value of the capacitor will expand the treble range you're preserving. Too large a value, end you'll be preserving midrange, too. Too small a value and you'll only be preserving the highest treble frequencies.
Chrome trapeze tailpiece with a diamond. For Gibson guitars including the following models- L-50, L48, ES-125, ES-330, etc. Please make sure to check the specs to see if they match your instrument to verify it is the correct replacement. Overall length of Tailpiece not including hinge = 4 5/8 inches. Side to Side width at bar = 3 19/64 inches. Width of string bar = 47/64 inches. String Spacing at Bar = 1 61/64 inches. Important Hinge/Mounting Specs: Mounting Area of Hinge length = 1 1/2 inches. Mounting Area of Hinge Width - 2 inches. Mounting hole location bottom center = 11/32 inch from bottom edge. Two Mounting hole locations from side edges = 5/16 inches. Two mounting hole locations Apart from eachother = 1 25/64 inches. Upper side of hinge length = 1 1/8 inches. Upper side of Hinge width = 1 25/64 inches.

The book provides examples of simple mathematical models for the complete signal chain consisting of the electric guitar and related accessories. Several do-it-yourself books have been written with the emphasis only on building a pre-specified circuit according to step-by-step instructions. This book takes one step further and brings up the designer perspective on guitar electronics. The importance of mathematics as a tool for design and analysis is emphasised throughout the text. Often in similar publications the use of mathematics is avoided as much as possible, but the fact is that mathematics provides ways to analyse circuits before spending time and money on random prototype builds. For more information on the contents of the book, check out the table of contents and the Google Books preview


Just SOLD #2 another fine example of the vintage 1960s era J200 copy by the great luthiers at Alvarez in the mid 1970s - the 80's WoW very well done impressive... Alvarez from over 40 years ago. This example is JVG rated at very good + 8.6/10 vintage condition with beautiful patina and character mojo as well so cool Gotta love this Beauty! This instrument has received our JVGuitars "set up" and several upgrades as well we have installed a new set of Martin 80/20 bronze Marquis strings for a crisp tone with great bass and volume as well as a Martin solid natural bone nut & a compensated saddle set custom fit into its original fully functional adjustable bridge with plenty of room for up or down adjustments to your personal taste further upgrades do include throwing out the old plastic tone robbing bridge pins for the superior resonation of solid ebony wood with brass ring and beautiful abalone inlay bridge pins and this was for tonal reasons and it looks much more high end as well, then we removed the old economy tuners of the era ( a weak point ) and installed a set of Grover tuners old holes were touched up in the process looks good and works excellent now to keep this guitar in tune and as a side benefit the added girth at headstock increases sustain as well. The medium slim profile C shaped neck is 1-11/16ths at the nut and also is pretty much the same as the 60's Gibby profile the frets are the originals as well and still playing well without buzz as per JVG set up. Truss rod is working fine and the headstock is looking cool with its Old School script Alvarez mother of pearl logo and crown design with its patina and cool old Alvarez Truss rod cove this guitar is striking as well. Great sounding like a Piano wow and she's playing with ease with excellent string action now. She retains her excellent vintage Sunburst and finish still shines nicely of course she is not new or mint it has some natural finish checking several that only adds to its Mojo along with several doinks here and there on the body and top a few that caught edge near binding on front and back not so big rather small and small paint had chipped off and so I addressed them with a fine tip matching color lacquer tip pen to touch up and to help preserve original finish integrity and looks much better as well. We also installed a replacement pickguard and it fits perfectly and looks great too. The 1960's VIBE and this instruments playability makes this an excellent choice for that SWEET Jumbo tone well crafted over 40 years ago Vintage Script Logo on headstock inlayed in mother of pearl on correct law suit era open book Gibby style headstock. Made in Japan well taken care of all these years and ready for you to enjoy another 40. Overall she is SWEET! Contact Joe to buy: jvguitars@gmail.com.
Hi Torch, appreciate the work gone into this , fantastically informative piece. Good to see such a following as well , too many Gibson / Fender fanatics out there that dismiss Jap / Asian guitars as inferior. Having played god knows how many guitars over 50 years I've had good and bad in both top and lesser known brands. Started off at 15 years old with a Tiesco ( cost me £15 S/H at the time. lol ). Admittedly it was a piece of junk, but hey it got me started. Just picked up a Strat copy made in China for £10 ( as new condition) Branded Excell , out plays my Aria by a country mile. I have an old acoustic here about 40 years old, cost £62.50 at the time. No place of origin , serial No or anything. Imported by Rose Morris with the brand Avon on the head stock. This baby out plays any acoustic I've ever played, including a couple of Martins, As any guitarist should know a guitar is how it feels and plays not it's name. Nothing wrong with Jap / Asian guitars , could be made in Iceland for all I care it's the guitar that counts. Keep up the good work. Regards and thanks.
Think of Stevie Ray Vaughan, and you’ll have a good idea of what overdrive effects can do. They’re based on the ‘broken’ sound that vintage tube amplifiers would make when they were fed a signal too strong for them to handle smoothly. Modern overdrive pedals can also have circuitry that emulates the same effect even when connected to a solid-state amp. Because they work by boosting the signal, experimenting with the effects of an overdrive pedal can be as simple as adjusting the volume and seeing what happens.

Fender "Squire / Bullet" Strat. Great, low priced project guitar. Black, laminated body, maple neck with Indian Rosewood fingerboard. 4-bolt neck plate. Original, "covered" tuning machines and nut installed. Frets in NEW condition. Neck adjusted well with slight "back-bow" under no tension and does have adjustable truss rod. Body and neck finish in excellent shape. Headstock finish has wear to the word "Bullet" see photos. We have no additional parts with this one, nor a case or gig bag. Guitar as photo'd only. Ready for your custom hardware parts. Would make a great project / player or second "don't care if it gets stolen off the stage" guitar.
In 1977, Gibson introduced the serial numbering system in use until 2006.[71] An eight-digit number on the back shows the date when the instrument was produced, where it was produced, and its order of production that day (e.g., first instrument stamped that day, second, etc.).[72] As of 2006, the company used seven serial number systems,[71] making it difficult to identify guitars by their serial number alone.[71][72] and as of 1999 the company has used six distinct serial numbering systems.[72] An exception is the year 1994, Gibson's centennial year; many 1994 serial numbers start with "94", followed by a six-digit production number[citation needed]. The Gibson website provides a book to help with serial number deciphering.[72]
• Why frets come loose: Wear from string contact, fretboard drying and jarring mid-gig or during transportation can cause frets to pop loose. And if binding loses moisture, that can cause the ends of frets to rise or be exposed. These all create troubles that can wrongly be blamed on the more typical problem of fretwear, but in these cases dressing or replacement isn’t necessarily the answer. If there’s enough fret wire left, a loose fret can be reseated in its slot along the fingerboard, and a skilled luthier can often fill the gaps between the binding and the fret ends.
Solid body guitars were the next step in guitar development, with Leo Fender creating a modest instrument called the Broadcaster, which was then rebranded as the Telecaster. The Stratocaster came later and, in addition to the changes in the pickups, included contours in the body that made the guitar more streamlined and easier to play while standing up. Today, the Stratocaster is still the most iconic electric guitar shape; it’s associated with guitar wizard Jimi Hendrix, and many beginners end up with a Stratocaster-style guitar. Gibson introduced their own line of solid body guitars, the considerably swankier Les Paul.

A free, guided tour of the Taylor Guitars factory is given every Monday through Friday at 1 p.m. (excluding holidays). Taylor’s expansive 145,000 square foot manufacturing facility is located east of San Diego (about 20 minutes from the downtown area) in El Cajon, California. No reservations are necessary for the tour, although the company asks that large groups (more than 10) call in advance at (619) 258-1207. Taylor encourages guests to arrive at its Visitor Center, where the tour begins, 10-15 minutes prior to tour time to sign in at the reception desk. The tour lasts approximately one hour and 15 minutes. While not physically demanding, it does include a fair amount of walking.
"Vintage" fretwire is most usually known as "medium" fretwire and that size in today's measurements is usually .080-.040"; what you would see commonly on a Fender RI or Martin acoustic.  I mention this as fretwire does vary and some "vintage" wire back in the day on the guitars was as narrow as .070".  It is commonly referred to in Dunlop numbers as 6230.
The amp and cabinet modeling is probably the weakest link of the Zoom G3X. Make no mistake - it’s nice to have customizable amp and cabinet pairings in a practice or headphones scenario, or if you simply don’t have a guitar amp yet. It’s just difficult to replicate the character and “oomph” of a vintage tube amp. This isn’t so much a knock on the G3X as it is of most amplifier modeling.
As discussed, Delay pedals add so much more weight to your sound and gives your guitar a doubling effect, which is really useful to make it sound like there’s two guitars on stage. They’re also great for creating psychedelic sounds and experimenting with riffs. Again, you don’t have to dial in big delay effects and can use the pedal subtly to add resonance.
And that's a wrap. If you're new to the pedal game, don't let anyone tell you that there are no rules. There are some very strict rules that apply if you want to sound professional, and these rules quickly reduce the amount of options down to very few, indeed. The honest and realistic among us will tell you the truth that there is a very firm effects pedal order you should connect your pedals in that you don't want to stray from unless you want to ruin your tone and appear to not know what you're doing. Guitar pedal order matters!
We began the process by creating a 'short-list' of brands that have amps selling in the sub $1000 price range with amps that have strong enough ratings to be short-listed for any of our other electric guitar amp guides. This gave us the following 22 brands to consider: Blackstar, Boss, Bugera, California Tone Research, DV Mark, Egnater, EVH, Fender, Hughes & Kettner, Ibanez, Laney, Line 6, Marshall, Orange, Peavey, PRS, Randall, Roland, VHT, Vox, Yamaha and ZT.
Their first flat-top acoustic guitar was produced some time shortly before 1910, but at that time their flat-tops were still a long way behind Martin in terms of popularity. It wasn't until 1923 that they began to seriously break into the flat-top acoustic guitar market with their signature Nick Lucas Special model and began to give Martin a run for their money.
Here’s the idea: Conventional electric guitar tone controls employ a single pot and single capacitor connected to ground. As you turn the pot, more signal goes to ground for a darker sound. The capacitor value determines the cutoff frequency — the larger the cap, the lower the cutoff frequency and the darker the sound. In other words, the cutoff frequency is fixed, but the percentage of signal that gets cut off changes as you move the pot.
Carvin is a guitar company with a different business model than the rest. You won’t find them at your local music store because Carvin only makes custom guitars. Their instruments are based around a handful of templates and each feature components that are individually chosen by the buyer. For this reason, it’s very rare to find two Carvins that are completely identical.
The idea behind this site is to share my experience with Do It Yourself approach to guitars, amplifiers and pedals. Whether you want to save a couple of bucks by performing a mod or upgrade yourself instead of paying a tech, or want to build your own piece of gear from scratch, I'm sure you will find something interesting here. Also, this is the home of DIY Layout Creator, a free piece of software for drawing circuit layouts and schematics, written with DIY enthusiasts in mind.

As such, a velocity-sensitive MIDI keyboard is a must here, and the more experience you have with string instruments, the more you will get out of this VST. It's knowing things like how the string all have different weight and tension behind them and how the volume changes when a plectrum thwacks against the strings that will give guitarists the edge here.

YouTube has become well known for its tutorial videos and how-to clips on every subject on the planet and guitar lessons are no exception. Videos don’t provide the same kind of interactivity as our Uberchord app, which can listen through your device’s microphone and give you instant feedback on your playing. But we agree that YouTube clips can let you actually see and hear what’s going on—it can make a difference when things get confusing.

The 2008 Les Paul Standard debuts Gibson’s newest neck profile—an asymmetrical design that makes it one of the most comfortable and playable necks ever offered on any guitar. The new ergonomically-correct profile is tapered, and designed to be thicker on the bass side, and thinner on the treble side, closely outlining the natural form of the hand as it grips the neck. The 2008 Standard necks are machined in Gibson’s rough mill using wood shapers to make the initial cuts. Once the rosewood fingerboard gets glued on, the rest—including the final sanding—is done by hand. That means there are no two necks with the exact same dimensions. So while it still has the basic characteristics of its respective profile, each neck will be slightly different, with a distinct but traditional feel.

Jacob - it really depends on several factors: how much money you have to spend, type of music you like to play, electric or acoustic. You can get started with a $100 acoustic of various branding with decent quality or a basic Squier Strat for $100-150 if you want electric for many styles. Epiphone makes Les Paul and SG models for $100 and up for a little more rock and roll edge - its all a choice of your style.
Electric guitars are full of options, with various pickups, bridges, fret sizes, neck radii, tone woods, tuners and so on all having an impact on how an instrument plays and sounds. But stripping things down to the absolute basics, there are three types of electric guitars: solid bodies, hollow bodies and semi-hollow bodies. And they’re ideally suited for different playing approaches.
Gretsch aggressiveness in the entry level market is at an all time high, churning out a wide selection of affordable alternatives to many of their premium guitar models. Continuing this theme is the Gretsch G5426 Jet Club, which is essentially a more affordable stop-tail piece version of the Electromatic Pro Jet Bigsby above. It features the same chambered body and high quality looks but with a basic humbucker and without a Bigsby.
Anyone who’s shopped for any kind of guitar recently knows that not only has the number of brands increased, the number of models offered by most major manufacturers has increased. Between Squier (Fender) and Epiphone alone, you’ll find about 20 different models under $200, and that’s not even counting the different color options. When you add newer brands (some of which seem to exist only on Amazon), you could easily end up with more than 50 different models—far too many to run past a testing panel because, as we learned from our ukulele tests, when you have more than about 10 instruments to test, it gets tough to sort them all out.
{"pageName":"[gc] shop","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop","prop1":"[gc] shop","evar51":"default: united states","prop10":"find in stores","prop11":"knoxville","prop5":"[gc] shop","prop6":"[gc] shop","prop3":"[gc] shop","prop4":"[gc] shop","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] site section"}
Half a step down from standard tuning. Used by bands/artists such as: Jimi Hendrix, Coheed and Cambria, Black Sabbath, Motörhead, Cannibal Corpse (Chris Barnes era), Nirvana, AFI, Rise Against, Failure, Weezer, Green Day, Kiss, The Hellacopters, Backyard Babies, Guns N' Roses, Neil Young, Van Halen, Brand New, Blind Guardian, Metallica (on the "Load", "Reload" and "Garage Inc." albums, "The God That Failed" and in live performances of standard tuned songs since 1995), AC/DC (some songs and in live performances of standard tuned songs since 2008), Slayer, Alcest, Rage Against The Machine, Stevie Ray Vaughan, Yngwie Malmsteen, Alice in Chains, The Smashing Pumpkins, The Killers, Relient K, Suede, RED on "Not Alone", Beach House, Third Day (on "I Can Feel It"), Die Ärzte (since "Geräusch") Skillet (on "A Little More"), and Vertical Horizon, Tyler Bryant & the Shakedown.

{"eVar4":"shop: guitars","pageName":"[gc] shop: guitars: agile","reportSuiteIds":"guitarcenterprod","eVar3":"shop","prop2":"[gc] shop: guitars","prop1":"[gc] shop: guitars","evar51":"default: united states","prop10":"brands","prop11":"martin","prop5":"[gc] shop: guitars","prop6":"[gc] shop: guitars","prop3":"[gc] shop: guitars","prop4":"[gc] shop: guitars","channel":"[gc] shop","linkInternalFilters":"javascript:,guitarcenter.com","prop7":"[gc] category"}

After the retirement of Kuhrmeyer in 1955, the company was taken over by Sidney M. Katz. The product line of Kay was shifted toward electric musical instruments on demands, and in 1964, the company moved to a new factory in Elk Grove Village, Illinois. In 1965 Katz sold Kay to Seeburg Corporation, and he became the head of Seeburg's musical instrument division. In 1967, Kay was resold and merged with Valco, but dissolved in 1968 due to financial problems.[9]


This set has all three of the best pianos available in a size that can be handled by most modern devices devices (PCs or recommend iPhone 8/iPad Pro). Needlessly long samples have been shortened but looping only happens at almost inaudible trailing ends of samples (many after 20s).  If you are looking for a quality set with different piano types to choose from then this is the one. This set is already included in the Nice-Keys-CompletePlus and Nice-Keys-Extreme.


My first Custom was a Charvel/Jackson Star body with a custom white paint with bullet holes and dripping blood from the holes ! My friend and Guitar teacher Randy Rhoads helped me get started on the right track in 1980 ,before I was playing in clubs and headlining shows later in the 80s and 90s,I was set with the perfect guitar! Gibson is just a brand name,Epiphones are better then Gibsons ,your just paying for a name,same with Fender! Remember,one of the greatest guitars was made for less then $300,so you should never really spend more then that unless it is a custom ,then you can do what you have to!
Working with Dimebag Darrell Abbot, Rex Brown, Mike Scaccia, Scott Shelby and others, this guitar master has had to work overtime to keep up with these guitarslingers' abuse. These guys make their guitars scream on stage, and it's King's job to make them sing again. "Everbody knows -- other than Scott -- that they're at my mercy when it comes to working on their guitar," he says. "That's why I'm not out on the circuit. I'm pretty picky about which guitar players I work with." (Although Darrel and Mike are no longer with us - may they ignite heaven with their notes - Scott is still tearing it up with Warbeast.) Rabid Flesh Eater, Warbeast, Rigor Mortis, Pantera, this guy has worked on some brutal guitars. "If you're going to buy a Cadillac, put the right parts on it" is one of his mottoes.
Our very first impression of the American Special Telecaster was that it’s such a good guitar. There is just something about it that feels remarkable. It’s hard to point to one particular thing, what does it is the combination of design, sound and feeling. We love the alder body and the maple neck that makes your music sound great, and the Texas Special pickups make everything we play on this guitar sound amazing.
I will not take my guitars anywhere else. You just do not get better, more professional service than at Franklin Guitar.  I have played guitar for a long time and I have been in hundreds of guitar stores, and this is one of the best.  You won't get the "hey don't touch that" or they "what's it going to take to get you into one of those guitars?" treatment.  You get treated like a valued customer.  Also a lot (most) of independent guitar stores have terrible assortments of guitars for sale, but not Franklin Guitars.  They have a great variety of quality instruments.  Plus, they have some really cool, unique guitars.  A place like this is so rare nowadays.
Epiphone are a well respected subsidiary of Gibson, and have been making musical instruments since their founding in what is now Turkey, Europe, in 1873. After being acquired by Gibson in 1957, Epiphone are now best known for manufacturing affordable versions of some of the most iconic guitar models around, including the Les Paul and SG. However they do make a couple of original models, such as the Casino, which was famously used by the Beatles.
It's pretty common that your fingers hurting at first. We all went through it. It does not matter what kind of strings you use. You will pay the price…. Think of it as a Right-Of Passage, or an initiation of sorts. If you think about it, everything in life that is pleasurable comes with a certain amount of pain that must be endured, whether it is financial, such as buying something you really want, emotional, as in love, or physical, such as building your muscles and playing sports.

A Wiki is a web page that anyone can make changes to. The job of maintaining accurate information is far too monumental for one person, but a community of enthusiasts can maintain many thousands of pages quite easily, each person adding a bit at a time. That's the idea behind iGuide?s "What's It Worth Wiki". The most famous example of a Knowledge Wiki is Wikipedia, of course. But, our vision is that someday iGuide?will become the Wikipedia of Art, Antiques, Collectibles, Memorabilia....and Guitars.
Type – the dielectric used in the capacitor. Polyester and polypropylene are most common, with ceramic capacitors also being popular, especially in lower-end instruments. Reissues of vintage instruments often use reproductions of vintage paper capacitors, which are also popular aftermarket replacements. Finally, audiophile-grade polypropylene film and foil capacitors are sometimes used in custom instruments, although their size can prove problematic as they're designed for use in audio amplifiers and consequently have working voltages in excess of 500 V, far higher than anything encountered inside an electric guitar.[16]
I am running the TimeLine, Mobius, Big Sky and Flint along with a few JHS drive pedals and a POG. I have a 5 channel true bypass looper and use a DMC-3XL and TNT tap to control my MIDI devices. In the past I have had all of my drives and POG in the 5 channel looper. But I have reduced significantly the number of drives I am running. I run a SP compressor and an EM-Drive at the beginning of my chain that are my always on pedals & I’m not sure I need them in my loop. I also cut down to 2 drive pedals (JHS Double Barrel & Jetter Gold Standard). Would I be able to run the TimeLine, Big Sky, and Mobius through the bypass looper and leave them always on but bypass through that? Should/Do I need to use a TRS to do this run since I am going straight into the in/out signals? I’m trying to do some experimenting but wanted to get your opinion as well.

But…Don’t/Never Solder on to a Closed Circle!…Because…If a very strong DC Electric Current Reaches your Axe…It Could…Kill/Maim!..With a AC Current you may if you’re lucky just get your fingers burnt!…You’ve just got to have a Break Somewhere!..So that in The Event of an Electrical Overload!..The Excessive Load can..Drain Itself off!…It’s an Electrical Safety Precaution!…Just like a Fuse!


Phaser: A phaser or "phase shifter" creates a slight rippling effect—amplifying some aspects of the tone while diminishing others—by splitting an audio signal in two and altering the phase of one portion. Three well-known examples of phaser are the two handed tapping part on the Van Halen instrumental "Eruption" and the keyboard parts on Billy Joel's "Just the Way You Are" and Paul Simon's "Slip Slidin' Away".[77]

I like...So fun...I am a big fan of the call of duty games - this one is a step above my son loves it and I do to but he is a lot better at it than I am - it is a challange for someone new to playstation...Well first starters died about ten times just beginning in campaign and yea even though I have it on regular mode it still is a challenge for me signs of I'm getting to old for this lol but there snippers on story mode when you concentrate it slows down all the enemies but give it a shot your self I like it
Typically, players tend to place their delay and reverb effects within the effects loops of their amplifiers.  This placement is especially helpful if you get your overdrive and distortion from your amplifier instead of pedals. Otherwise you would be feeding your delay repeats and reverb ambiance into the overdrive and distortion of your amplifier, which can sound muddy and washed out.  You can also place your modulation pedals within the effects loop of your amplifier as well for a different sound.
Paul has been great to work with, he's flexible, and knowledgeable on what works best for our son. Plus our lessons are in the comfort of our home! He always communicates with us on how our son is doing and if he needs to practice more, so he can show improvement on learning notes. Paul also purchased a bass guitar so he can work with our son on learning the bass as well. I also asked if he can help us shop and pick out a reasonable amp and he agreed to help out and suggested a few places to shop at. Working with Paul has made this experience easy as I was worried of finding a good fit for our son. I would recommend Paul to anyone and you can't beat his rate!
Half a step down from standard tuning. Used by bands/artists such as: Jimi Hendrix, Coheed and Cambria, Black Sabbath, Motörhead, Cannibal Corpse (Chris Barnes era), Nirvana, AFI, Rise Against, Failure, Weezer, Green Day, Kiss, The Hellacopters, Backyard Babies, Guns N' Roses, Neil Young, Van Halen, Brand New, Blind Guardian, Metallica (on the "Load", "Reload" and "Garage Inc." albums, "The God That Failed" and in live performances of standard tuned songs since 1995), AC/DC (some songs and in live performances of standard tuned songs since 2008), Slayer, Alcest, Rage Against The Machine, Stevie Ray Vaughan, Yngwie Malmsteen, Alice in Chains, The Smashing Pumpkins, The Killers, Relient K, Suede, RED on "Not Alone", Beach House, Third Day (on "I Can Feel It"), Die Ärzte (since "Geräusch") Skillet (on "A Little More"), and Vertical Horizon, Tyler Bryant & the Shakedown.
The history of signal modification isn’t just one of pleasing the ear through unconventional methods. It works both ways: Guitar effects have modified their users, just as much as their users and engineers have modified their sound. New effects can change a guitarist’s playing ability completely, concealing their technique as well as embellishing it. U2’s The Edge, for example, is known for his restraint of technique by embedding different rhythms within delay settings.
The Les Paul Triumph bass, like the Les Paul Recording guitar was first shipped in 1971, but was based on a slightly older model, the 1969 Les Paul Bass. Functionally, these basses were very similar, although the Triumph did offer low and high impedance operation, without the need for a transformer cable. This owners manual details the basses specifications, suggests a string set, recommended action, and suggests a series of tonal settings for rock, country and solo bass playing.
A. Electric guitars either have bolt-on, set neck, or neck-through neck construction. Bolt on necks are simply bolted onto the body, set necks are set into the body and glued, and neck-through construction is where the neck extends all the way through the body. The latter is generally considered the best and most durable, but won't be found on cheaper guitars.
Part of their Espana series, the Cordoba 45MR is handsome, handmade in Spain, and brings all the character of Spanish guitar music to the player, starting with the idea of using the guitars of the 1880s and 1890s as a model for the appearance and sound. Nylon-string guitars themselves came from Spain, so this is perfect for the player who wants as much connection to tradition and authenticity as possible.
A while back I bought a GuitarPort, a product from Line6 that was one of the earliest guitar-to-PC interfaces. It cost me $99. It connects through USB and I could plug the guitar into it. I could play amp models and effects through my PC and the sound would come out of the computer speakers. (Headphones are of course an option through the PC speakers)

The offset body style includes three main instruments: the Jaguar, the Mustang, and the Jazzmaster. While there are definite differences between them, offset guitars all generally have a “jangly” sound. When we say jangly, we mean bright and clear with a subtle mid and low-end response. These guitars are also well suited to rhythm work depending on their tone knobs are adjusted.
The book provides examples of simple mathematical models for the complete signal chain consisting of the electric guitar and related accessories. Several do-it-yourself books have been written with the emphasis only on building a pre-specified circuit according to step-by-step instructions. This book takes one step further and brings up the designer perspective on guitar electronics. The importance of mathematics as a tool for design and analysis is emphasised throughout the text. Often in similar publications the use of mathematics is avoided as much as possible, but the fact is that mathematics provides ways to analyse circuits before spending time and money on random prototype builds. For more information on the contents of the book, check out the table of contents and the Google Books preview
Let me shoot you some names Mr Pro Guitar player. When those you mention can play with the likes of Jack Pearson you can put them on a list. You didn’t even touch on country or bluegrass so I have to assume you know nothing about them. So let me throw this out there. There is only ONE called Mr. Guitar. Chet Atkins. His protege, Jerry Reed is another great. Let’s try Merle Travis, Jody Maphis and in recent years Redd Volkaert. I think you need to expand your listening radius. Let’s not forget the man who likely has his name on your guitar, Mr. Les Paul. Then I would ask you listen to bluegrass flatpicking. You want speed? These guys can play with Ygnwgie and do it on a Martin D28.
1W 1x6 1x8 acoustic Amp Amplifier Amplifiers Amps Battery Powered Amps Beatles beginners combo amps Danelectro Disclaimers Effects Pedals Electric Guitars Epiphone Fender Fender Amps Fender Mustang Gretsch Guitar guitars Ibanez Les Paul Marshall modeling amps Orange Amplifiers Orange Micro Crush Peavey Amps pignose Portable Amps Practice Amps Review Reviews Rogue Solid State Amps Starter pack stompboxes Stratocaster Telecaster Tube Amps Vox Vox Amps Yamaha

On electric guitars, you do a lot of plugging and unplugging of your cable, and these actions can eventually loosen the output jack, causing a crackling sound through the speaker. This crackling indicates a disconnected ground wire. To fix this problem, you first need to take off the jack plate or pick guard and locate the detached wire causing the problem.

I've been to Steve about a dozen times with my guitars, families and friends instruments and have sent several people there and have nothing but great things to say. He is reasonably priced and likely one of the most talented and experienced Luthier's in Boston. It's rare to see any establishment get 5 stars from so many people and Steve deserves it! Only thing is, if you're in a rush to get your instrument back, go somewhere else where they do it quickly and without much thought/TLC. Steve takes his time to do it right and has a lot of customers because he's the guy to go to in the greater Boston area. Highly recommend!


The DigiTech Whammy is a great example of a powerful pitch shifter. Controlled by an expression pedal in a manner similar to a wah, it gives you the ability to immediately alter the pitch of the notes you are playing. Pantera and Damageplan guitarist Darrell Abbott used and abused such a pedal to get some amazing sounds in his hardcore style of play.
Praises and recommendations continue to flood the reviews of the Fender Super-Champ X2 HD, pointing to its great value for money as its main selling point. Even users who are not happy with some of the extra features agree that the amp gives you more than what you pay for. As expected from a Fender tube amp, clean tone is well received, while others are equally happy with the other voicings. Another plus for the Super-Champ X2 HD is that it gets good feedback from guitarists of different playing styles and instruments, be it single-coil equipped or even those with active humbucker pickups.
I purchased this as a replacement for my acoustic guitar of 15 years. I couldn't be more pleased with the purchase. The construction is excellent without gaps or excess glue around joints. The top is solid sitka spruce which is a very attractive feature at any price point let alone $200. The aesthetics on the DG800 are simple and the design on the head stock is painted and will rub off with time. However that has no bearing on the overall fit and finish of this guitar, both of which are excellent for a <$1000 guitar.
Equalizer or EQ pedals have traditionally been used to boost audio signals for solos. If you want to boost the middle frequencies, the EQ will do the trick and provide a tight tone. Some musicians don’t find boosters and EQ pedals to be necessary in a chain, so make sure you do some research to figure out if this type will really benefit your sound
The internal bracing has also been updated to a forward shifted pattern to further enhance the dynamic range of the soundboard and the guitar’s overall projection. The Taylor 214ce has a nice punchy sound and good articulation. If you need more output, just plug it in and let the onboard Expression System 2 (ES2) pickup do its job. The ES2 features a patented behind-the-saddle pickup and knobs for volume and tone, giving you total control over your tonal output.
Next up we have the specialty electric guitars. This category consists of several different types of electric guitars, but we’ll start out with 12-string electric guitars. The fact that the low E, A, D, and G strings all feature higher octave strings while the B and high e strings both have additional strings that are tuned the same, electric guitar 12-string models have a distinctive shimmer and richness to them that guitar players love. Guitar players who favor heavier genres like death metal or hard rock may want to add a 7-string, an 8-string, or even a 9-string electric guitar to their rig for when they need some extra low-end growl and power. Other specialty guitars include baritone guitars, double neck electric guitars, and pedal steel guitars & lap steel guitars.
×