Nicknamed - "Papa-Papa". DADDAD is common in folk music (Irish, Scottish), and for the execution of a rhythm guitar in "heavy" (alternative music) on 6th on the third string at the same time. To reach the tuning from DADGAD, Open D or Open D Minor, the G string is dropped to D so that the 3rd and 4th strings are tuned to the same pitch. DADDAD tuning is sometimes used on Dobro guitars for rock and blues. Notable users of this tuning include Billy McLaughlin and John Butler.

{ "thumbImageID": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "defaultDisplayName": "Epiphone Limited Edition SG Special-I Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Cherry", "sku": "sku:site51500000013041", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Cherry-1500000013041.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Cherry/J38676000003000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ebony", "sku": "sku:site51500000013039", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Ebony-1500000013039.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Ebony/J38676000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pelham Blue", "sku": "sku:site51500000013040", "price": "174.99", "regularPrice": "174.99", "msrpPrice": "248.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue-1500000013040.gc", "skuImageId": "Limited-Edition-SG-Special-I-Electric-Guitar-Pelham-Blue/J38676000001000", "brandName": "Epiphone", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

By the 1950's, brands like Gibson and Fender were gaining notoriety thanks to the popularity of rock 'n' roll and its stars weilding electric guitars. Guitarists like Dick Dale, Bo Diddley, Chuck Berry and Chet Atkins could all be found carving their own places in music history with the electric guitar, and by the early 60's the instrument saw an extraordinary upsurge in popularity. Today, there are an endless amount of rock sub-genres, making no shortage of superbly crafted electric guitars from the world biggest brands, including Ibanez, Epiphone, and Danelectro, as well as Godin, Gretsch, Peavey and more. Whether you're into black metal or folk rock, you can be sure that there's an electric guitar that perfectly matches your own style and tastes, and it can easily be found right here, regardless of your skill level or budget.
This is just what a guy or gal needs to help him or her make an informed decision on making a electric guitar purchase. All the topics and explanations of the given topic, pick-ups, machine heads etc… were easy to follow and understand. Not a lot of tech talk that would either confuse or intimidate a perspective buyer, that is a feat in its self kudos to your writers. keep up the good work.
A lot of EBay sellers have been calling the Hagstrom solid-bodies of the time Hagstrom-Kent. They are not. If it says Hagstrom on the body, it’s a Hagstrom. If it is one of the Hagstrom guitars that was sold as a Kent, it’s a ‘Kent, made by Hagstrom’. I wonder if the sellers think they can get more for a guitar by associating the Kent name with it. I don’t see how. Perhaps the fact that there are so many Kents floating around, the sellers wanted a more familiar name to hang on the Hagstrom.
I have 2 Kent guitars. One like a Strat and one 12 string hollow body. I know they were made in the 60s and were distributed by Kent Musical Products. Address:5 Union Square, New York. 10003. And they were a subsidiary of Buegeleisen & Jacobson, Inc. Any further info on these would be appreciated. Most sold in the price range of 100 dollars and up.
Kay was indeed one of the earliest American manufacturers of electric guitars. Things progressed, and by 1934, the company was officially known as the "Kay Musical Instrument Company". The company became larger and more successful over the years, leading to the addition of a new factory in Elk Grove Village, Illinois in 1964. But somehow by 1965, the company had hit rough times and was bought by Seeburg, a jukebox manufacturer that sold Kay to Valco in 1967.

The Chord Harmonica consists of two harmonicas hinged together. Together, they are capable of playing 48 chords. They are 23 inches long, and each chord takes up 4 holes. The chord harmonica is used to provide chordal and rhythmic backing in an ensemble, much as rhythm guitar might do. Jerry Murad's Harmonicat's 1947 "Peg O' My Heart" was played on a Chord, with a cleverly arranged sequence of chords that produced the impression of a melody. Hohner's main Chord is known as the Hohner 48, because it plays 48 chords. Hohner from the 1930s to the late 1960s also produced the Polyphonia No. 8, which played 36 blow-only chords, in three rows. The concept failed and is often frowned upon by professional 48 chord players.
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
Used Instrument Buyer - [New Window] - When it's time to sell your used instruments, nobody makes it easier than UIB. We make our best offer up front, right out of the gate, so you know you're getting top-dollar for your used musical equipment. Since 2006, we've helped everyone from professional musicians to weekend guitar warriors get the most value out of their used instruments. We offer free no-obligation quotes for your used equipment. upon your approval, simply pack your equipment, ship it to us free, and we'll promptly mail you a payment.
These multi-effects pedals are exactly what the name suggests: all-in-one models that pack multiple effects into a single box. There are a few benefits to this, one of which is value, since getting more than one effect at once gives you great bang for your buck. They also tend to come with presets that give you customized mixes of their various effects, which can do a lot to teach you how different effects interact and how to mix and match them yourself.

Les Paul, the legend, designed this guitar. This guitar has had more widespread popularity than the Strat, IMO. Jimmy Page was a huge fan of the Les Paul and the SG. Gibson made the double neck SG on special request made by Jimmy Page which was featured in the song "Stairway to Heaven" in the concert at Madison Square garden. Jeff Beck and Pete Townshend are among other notable people who use the Gibson Les Paul.
Original plate reverbs were mechanical in nature. There was a literal plate inside the amplifier, which would transform input signal into vibration. Then you would have a pickup located somewhere near the plate, that recorded those vibrations. Today, such a contraption comes across as relatively crude, but many still love the unique mechanical sound it produces. Spring reverb uses a pretty much exact same principle, only this time you have a spring in there instead of a plate. The biggest improvement a spring reverb offers is reduction in both weight and size of the device.
Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?
An octave pedal listens to what note you’re playing and adds the next octave up or down (depending on your settings) making it sound like someone is playing the octave note with you. If you’re familiar with guitar or just learning, you’ll know that an octave is the distance between one musical note and it’s corresponding note at a higher or lower pitch. For example, if you play an open E string and then play the E string on the 12th fret, it will sound the same, just an octave higher.

I was paging through my daughter's Rolling Stone Magazine today and saw a small article with three different artists that use Harmony Guitars and they were singing their praises. I'm an old dude (or shall we say vintage)who's not familiar with all of the new bands popping up today, so I can't even tell you who these artists are. However, I did find it interesting that Rolling Stone did a spot on these guitars. I was too young to get my hands on many Harmonies when I was a kid, so I can't comment on their quality, but I know they were budget guitars and weren't considered anything special back then.

The original switch configuration used from 1950 to 1952 allowed selection of neck pickup with treble tone cut in the first position (for a bassier sound), the neck pickup with its natural tone in the second position with no tone, and in the third switch position both pickups together with the neck pickup blended into the bridge, depending on the position of the second “tone” knob. The first knob functioned normally as a master volume control. This configuration did not have a true tone control knob.[2]
Extremely eclectic, Page has a diverse array of guitaristic influences, which includes blues guitarists Otis Rush, Buddy Guy and Hubert Sumlin as well as early rockabilly guitarists Cliff Gallup and Scotty Moore. He combined these influences with a strong interest in the occult and plenty of his own studio savvy to paint a musical landscape within every Led Zeppelin song. Page’s landmark use of echo effects in tracks like “How Many More Times” and “You Shook Me,” bizarre tunings in cuts like “Friends” and “Bron-Y-Aur Stomp,” and excursions with a violin bow in songs like “Dazed and Confused” yielded textures that were unparalleled at the time.
These two components work in tandem to influence tone and playability. The bridge is mounted to the lower portion of the guitar body. The strings are routed over it before terminating on the body or on a tailpiece. Bridges are designed to compensate for varying string lengths, gauges, and metals, ensuring that the strings remain in tune with each other. Bridges usually allow adjustment of the string's length to bring each string into tune along the entire length of the fretboard. This process is called intonation, and is an important part of setting up a guitar for optimal performance. Some bridges permit string height adjustments that affect the the ease with which the strings can be fretted, and is often referred to as the guitar's "action."
I bought mine used in 1989 in a mom and pop music store in the North GA mountains in Cumming GA and have loved it everysence I Know very little about it except that I would not trade it for a new one. The sustain in the body of the overtone note is fantastic and rare to find.I use d'Addario phosphorus bronze strings 11 - 52 and would not change anything about this guitar,fantastic!!! Thanks Victor
A very useful way of creating space for guitars in the final mix is to use tunable high-pass and low-pass filters to remove extreme frequencies that do nothing to enhance the guitar tone, but invade the space of other instruments that do perform in those areas. Generally speaking, it’s worth losing everything below 80Hz, although it’s not unusual to set the filter a good degree higher. Shaving off some high end may also be useful to help place the guitar in a specific area of the audio spectrum. Filter at the mixing stage, as the sound of the recording will often determine the optimum filtering points.
National Dobro’s involvement with electrics began, indirectly, with experiments conducted by George Beauchamp, who designed his first “electro” guitar in 1931, while actually still with the National company (not yet merged with Dobro). This was a wood-bodied “frying pan” with a pickup probably designed in conjunction with Paul Barth and Harry Watson, another National employee.
We are your Vintage Pickup specialists.   We have cornered the market of manufacturing the most accurate vintage pickup reproductions to which can not be equaled.  Our process is to chemically analyze an original pickup magnets and wire, then we reproduce them with the exact same magnets and wire.  We don't use stock magnets or wire.   We don't degauss magnets and say they are vintage.  Our magnets are only as strong as the elemental composition will hold.  Our wire is specially manufactured for us, we have many batches of wire with all different types of resistances and O.D.'s.  Our wire also is processed differently than modern conventional wire, these little details are what makes the Klein Pickups Reproductions the most accurate in the world.   We have a full array of models that we reproduce.  Check out our site for the full list of all of our offerings.   As a small business we always appreciate your business & support.  -Thanks
The questions I get asked in response to people reading my stuff on guitar wiring often relate to the 5-way pickup selector switch so I thought I’d write a brief explanation of how it works. Understanding how the 5-way switch on your guitar works is key to successful guitar wiring. Knowing what goes on inside the switch may sound like a simple, maybe trivial, detail but it’s something we all need to understand and it’s not as easy as it first seems.
Ooooohhhhh.... I used the Firebird 12 for two weeks on sessions in 1973.... I STILL solo the tracks I used that on... it's the BEST BEST BEST BEST OF ALL TIME !!!!!!!! FOR ANYTHING !!!!..... in fact, as I remember, the octave strings were wound different than the way Ric does it (high-low) and that even added to the incredible sound.....wanna sell the Firebird 12?
Last but by no means least, we have one of the most powerful effects and guitar processors ever created – the Line 6 Helix Guitar Effects Processor Floorboard. When this was released, the guitar world really had to take notice as this was more than just a multi-effects unit, but a complete collection of effects, amps, speaker cabs and microphones to provide users with every sound they’re ever likely to need.
Talk about sweet... gorgeous exotic Hawaiian woods.... The Beautiful curly Koa wood is so rare it is only found in the beautiful Hawaiian Islands...This example is well over 30+ years old and has mellowed to perfection...Very Clean Original condition WoW!....See the pics This one sounds about fun...I got into the Uke after seeing the Beatles anthology interview footage with George Harrison on Maui at his home had several Ukulele's at his home when company came over usually other pro buddies they would all have one to Jam great footage of George etc....and we go to Maui every year now for the last 7 or see the gorgeous Koa Wood everywhere you go almost...but The Curly stuff like this Uke is Very Expensive, This Uke's neck is arrow straight and is also highly curly & figured.... This one is the REAL DEAL folks and it don't get much better...Made in Hawaii in the 60' very good-excellent original condition so light finish checking only adds to the wonderful vintage feel of this great disappointments .
Danelectro's new '59XT guitar was an exciting announcement at NAMM 2018, and we're stoked to have a chance to test out this sharp-looking axe. Control-wise, the guitar keeps it simple, with a three-way pickup selector switch stacked above tone and volume control knobs, but it ups the game with a Wilkinson tremolo and a lipstick pickup. Watch along as Andy tests out the Dano's sound, and look below for more information about how to get one of your very own.
I'm a beginning player and have felt intimidated in guitar shops. That changed after walking into Grumpy's on Saturday. I didn't feel uncomfortable at all, quite the opposite. Kevin did a complete se...tup on my electric guitar while explaining the process to me. Looked at my other two guitars and (surprisingly) let me know that they didn't need anything. Such honesty is rare these days and I greatly appreciate it. I'll be back for all my guitar needs in the future. PS My son is a professional musician and has nothing but good to say about Grumpy's as well. He's a drummer but he loves the shop as well. See More
{"eVar4":"vintage: guitars","eVar5":"vintage: guitars: electric guitars","pageName":"[gc] vintage: guitars: electric guitars: kingston","reportSuiteIds":"guitarcenterprod","eVar3":"vintage","prop18":"skucondition|0||creationdate|1","prop2":"[gc] vintage: guitars: electric guitars","prop1":"[gc] vintage: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"electric guitars","prop5":"[gc] vintage: guitars: electric guitars","prop6":"[gc] vintage: guitars: electric guitars","prop3":"[gc] vintage: guitars: electric guitars","prop4":"[gc] vintage: guitars: electric guitars","channel":"[gc] vintage","linkInternalFilters":"javascript:,","prop7":"[gc] vintage"}
I’ve been looking for a long time for information on what goes on inside a typical Strat-style 5-way switch, and this site helps me understand these switches a bit more. But I still have questions, though: 1)Why is it necessary to use jumpers from one lug to another? 2)As I understand it, a 5-way switch is 2 separate 4-lug switches wired together, each with 3 input lugs and presumably 1 output lug, OR are these lugs INPUT as well as OUTPUT lugs? (I get the impression that they are dedicated to either input or output, but looking at some wiring diagrams, it appears that inputs from pickups can come from either side of the switch.) 3) Is one side the INPUT side and the other the OUTPUT side, or are both sides of the switch mirror images of one another? In other words, must the signal from the pickup enter the switch at one side, and exit the switch at the other side? It seems I can only really understand how these switches work in terms of inputs (from the pickups) and outputs (to the output jack or volume pot). Without knowing whether a certain lug is acting as an input or an output, it can be hard to understand which way the signal is travelling.
Marshall Chess assembled in his words "the hottest, most avant garde rock guys in Chicago" for the album sessions consisting of Pete Cosey (lead guitar, later with Miles Davis) Phil Upchurch and Roland Faulkner (rhythm guitar), Louis Satterfield (bass) Gene Barge (tenor sax), Charles Stepney (organs) and Morris Jennings (drums). Since Muddy wasn't as accustomed to this style, he only contributed vocals, but he still played an essential part in this recording. Electric Mud (1968) was mostly recorded in live takes with few overdubs and that off-the-cuff live feel that's captured on it makes it stronger. On the opener, "I Just Want To Make Love to You," pounding drums and Cosey firing out raw screaming guitar grabs your ear with Muddy's confident singing pushing the music along. The solo on this song is nothing short of phenomenal. The guitar starts playing some distorted melodic notes then morphs into this gigantic screeching feedback riff becoming louder and wilder then continues to morph from a tearing solo until it reaches this intense mind-bending groove that sounds on the brink of collapse. At this point, the guitar cuts out, leaving you breathless, with just drums and Muddy's voice building up back to the verse, then with an out-of-your-mind guitar and organ playing off each other to the end. The next song, "Hoochie Coochie Man," begins with an incoming guitar sound and has the opposite feel of the last track. Muddy's vocals seemingly come out of the speakers at you as alternating lines come from the left and then right, giving the listener a disorienting acid-like effect. A liquidy sounding guitar that washes over like a wave accompanies the verse and changes into an expressive wah-wah lead on the chorus. There's a great, fun cover of "Let's Spend The Night Together" which the Stones must have taken as a huge compliment, having their idol cover one of their songs. Muddy and the band turn it, around making it appear like he wrote it with a big mean sounding back melody, soulful distorted guitar lines and Muddy's commanding voice sounding the way he might have sung in a club in Chicago. "She's Alright" has a trippy beginning with bass notes fluttering up then swaying back down to open up to smash your head against the wall along with crashing cymbals matched by a dirty guitar that has real spirit to it. The song makes great use of cross-overs with a screeching guitar bouncing back and forth between speakers and then somehow transforms and ends with a pleasant distorted instrumental version of "My Girl." Original material was also written for this record like "Tom Cat" and "Herbert Harper's Free Press News," with the latter as a vaguely topical song about the sixties with lines like "world is moving much too fast" and "where ya gonna run to, where ya gonna hide" and a fuzzed out guitar that parallels the confusion and outrage of the lyrics. "The Same Thing" closes Electric Mud with a slow heavy blues feel to it and a stretched out, aching guitar on top.
I heard off of a great guitarist years ago when I asked him about fender and gibson he said they were expensive and not great and also said the Gordon Smith guitars played and sounded great and as they never advertised and were a small builder in the uk the cost was cheap for the quality of the guitar. A players guitar rather than a fancy looking guitar thats all show and less go. I think they are the price of a mim strat but great hardware not chinese.

A very stylish black guitar by ENCORE with a great 'Humbucker' pickup.......The simplicity of this instrument makes it a joy to play and It sounds as good as it looks! Used....but in great condition and showing only minimal signs of use (no scratches, chips or dings) and is in full working order. The scale is full length (not 3/4 or 7/8)...but the body size is smaller and lighter than a typical stratocaster (see image for comparison), which makes this guitar perfect for a younger / smaller person or anybody who might like a very robust but lighter instrument. All reasonable offers considered.
This is a great DVD, and Keith's style is very laid back, and easy to listen to. You can't help but like the guy, and once you start watching the DVD, you don't want to stop. He is extremely knowledgable, and it is like having an instructor right there with you. The DVD begins with the very basics, and works up to some quite complicated playing, so there would be something in this for everyone, from complete beginners (like me) to those looking for more challenges with their playing. For the price, I don't think you can go wrong.
No matter your vision, SparkFun's products and resources are designed to make the world of electronics more accessible. In addition to over 2,000 open source components and widgets, SparkFun offers curriculum, training and online tutorials designed to help demystify the wonderful world of embedded electronics. We're here to help you start something.
Like any other electronic products, the amp as well has already gone into notable changes and updates over the years. However even the changes in amp technology happened, many still prefer a tube powered amplifier over a solid state and modeling amps. This is mainly because the sound of a valve is considered the organic or natural on how an amplifier should sound. While the other two is engineered to sound like a tube amp especially the modeling amps.

Leo Fender’s simple and modular design was geared to mass production, and made servicing broken guitars easier. Guitars were not constructed individually, as in traditional luthiery. Rather, components were produced quickly and inexpensively in quantity and assembled into a guitar on an assembly line. The bodies were bandsawn and routed from slabs, rather than hand-carved individually, as with other guitars made at the time, such as Gibsons. Fender did not use the traditional glued-in neck, but rather a bolt-on. This not only made production easier, but allowed the neck to be quickly removed and serviced, or replaced entirely. In addition, the classic Telecaster neck was fashioned from a single piece of maple without a separate fingerboard, and the frets were slid directly into the side of the maple surface—a highly unorthodox approach in its day (guitars traditionally featured rosewood or ebonyfingerboards glued onto mahogany necks). The electronics were easily accessed for repair or replacement through a removable control plate, a great advantage over typical construction, in which the electronics could only be accessed through the soundholes in the case of hollow-body instruments, or by taking off the pickguard after removing the strings (in a design popularized by Fender’s own later guitar model, the Stratocaster).

Clarence White helped shape two genres: His acoustic flatpicking, first displayed as a teenager when he and his brother formed the Kentucky Colonels band, was key in making the guitar a lead instrument in bluegrass. Later, he set the stage for country rock and transferred that dynamic precision and melodic symmetry to the electric guitar. A top session man in the Sixties, he played on the Byrds' 1968 landmark, Sweetheart of the Rodeo. After he joined the band later that year, White brought a full-bodied rock elation to his California-inflected Nashville chops. "He never played anything that sounded vaguely weak," said the Byrds' leader, Roger McGuinn. "He was always driving… into the music." White had returned to bluegrass with the acclaimed Muleskinner album when he was killed by a drunk driver in 1973. He was 29. "Clarence was immersed in hard country and bluegrass," said Dan Auerbach of the Black Keys. "He incorporated those elements into rock & roll, and it totally blew people's minds."
The Epiphone LP Special II Les Paul Collection Electric Guitar is a GREAT GUITAR for $169.00 (The average selling price at the time of this review). The pickups, tune-o-matic bridge and stop piece are the same ones used in Epiphone's more expensive guitars, and are similar to what's used in much more expensive Gibsons. Although the tone adjustments have been simplified to a toggle between the three pickup combinations and an overall tone control for both pickups, this is not as big a deal as many might make of it. Given the vast array of other things that influence electric guitar sound -- strings, amp choice and settings, effects pedals and so forth -- the guitar sounds great as is.
The main thing to keep in mind regarding vintage guitars: A guitar is worth what somebody will pay for it. There aren’t necessarily rational reasons behind the value of a particular model. Rarity is only really relevant if the guitar in question is part of a group of guitars that are lusted after by many collectors, and many of those collectors are also considering investment potential, so those guitars will never be played and may end up in museums in Europe or Asia. In other words, Rarity means nothing without demand. A rare crappy guitar is still a crappy guitar and if nobody wants it, it’s just firewood. Condition counts for more.
Description: Body: Basswood (Tilia, Linden, Lime) - Neck Attachment: Bolt - Neck Wood: Maple & Walnut - Neck Construction: 5 Piece - Nut Width: 55mm - Fingerboard: Rosewood - Frets: Jumbo - # of Strings: 8 - Scale Length: 27" (69cm) - Headstock: 4+4 - Bridge: Fixed - Bridge Construction: Rosewood - Cutaway: Double - Hardware: Black, 1x Volume Control, 1x Tone Control, 3-Way Switch - Pickups: IBZ-8 - Pickup Configuration: H-H - String Instrument Finish: Black, White

The construction of an instrument is naturally a fundamental characteristic that pertains not only to playability, but the ultimate sound of the instrument as well. Durability will be affected by this as well. Guitar construction varies from brand to brand and model to model; instrument makers utilize a wide variety of materials to build the guitar body. Wood is the most common material associated with guitars, but plastic and metal are used as well. Construction should also be given extra consideration with electric guitars, as the electrical components serve as a secondary construction within the instrument.

Telecaster is considered to be the oldest solid body electric guitar in the world. Capturing that type of pedigree is not easy, but Squier managed to pull it off. Handling the Squier by Fender Vintage Modified Telecaster brought back some of the best memories of my youth, when Telecaster was the go to axe. This is definitely one guitar worth trying out.
I have been a bass player and still am however I started on guitar at 12 and went back to it about 12 years ago. There really isn’t too much difference of perfecting your craft on either instrument. The most important thing to realize is when to play and when not to. I spent years learning how not to be a busy bass player and now that I have such a passion for playing guitar, I’m learning how to sound busy without really being busy.
Possibly the most famous of all guitar effects, the talk box has its indelible place in history.  The guitar signal is pushed thru a speaker into a tube that the player holds in their mouth.  This tube is usually run up a mic stand, so that the player can use the embouchure of the mouth cavity to control vowel sounds that are then picked up by the microphone and pushed back through the PA system.
Description: Guitar Type: Acoustic/Electric - Body Size: Dreadnought - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Nut Width: 43mm - Fingerboard: Rosewood - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Rosette: Pearloid - Hardware: 1/4" Output, Chrome Tuners, XLR Output - EQ/Preamp: Ibanez AEQ200T - String Instrument Finish: High Gloss Natural

Martin began with a 000-size guitar, which had 12 frets clear of the body. They rejected the 27" scale idea, as this would have been impractical since the high string tension on a guitar would have made the instrument hard to play. Instead they used a 25.4" scale length. To accommodate Bechtel's request for 15 frets clear of the body, they squared the body's shoulders to add 1 5/16" to the clear part of the fingerboard. This allowed 14 frets clear of the body. Since they felt aesthetically the bridge should remain halfway between the center of the soundhole and the endblock, there really was no way to make the guitar have 15 frets clear. The bottom bout was reshaped slightly to match the new shape of the upper bout (note when the 000 went to 14 frets in 1934 it retained this initial OM body shape).
So, I was looking for a single-ended amp. Say what you will about class A/B amps (and, to be fair, most of the great recorded tones in rock history are class A/B push-pull amps), some of them don’t really get singing until they’re too loud for the bedroom or studio. Sometimes you just need to hear that cranked tone without getting the knock from the neighbors. To quickly recap:
Treadle-based volume pedals are used by electric instrument players (guitar, bass, keyboards) to adjust the volume of their instrument with one foot while their hands are being used to play their instrument. Treadle-style volume pedals are often also used to create swelling effects by removing the attack of a note or chord, as popularised by pedal steel guitar players. This enables electric guitar and pedal steel players to imitate the soft swelling sound that an orchestra string section can produce, in which a note or chord starts very softly and then grows in volume. Treadle-based volume pedals do not usually have batteries or require external power. Volume effects: Electro-Harmonix LPB-1, Fender Volume Pedal, MXR Micro Amp, Ernie Ball Volume Pedal.

The core metal used for strings is an important variable to consider.  Not only does the string core affect tone, but it affects the tension strength as well.  The heavier the string gauge, the stronger the core metal needed.  You don’t want premature string breakage, especially during a gig.  Your options absolutely depend on the tone you desire, but they also depend on the string gauge you prefer for the genre of music you play.

Unfortunately, no reference materials were available for this early period, so we’ll make some educated guesses. Based on the evidence of the logo on the 1968 amplifier, we suspect Univox guitars with the plastic logo debuted at about the same time. By 1970, Univox was employing decal logos on some models, further corroborating this conclusion. If this assumption is correct, it would suggest that among the first Univox guitar was the Mosrite copy known later as the Hi Flyer, debuting in around 1968. This would be consistent with the evolution of “copies” in Japan. As the ’60s progressed, the Japanese were getting closer and closer to the idea of copying, producing guitars similar to their competitors, such as Italian EKOs and Burns Bisons, etc., finally imitating American Mosrite guitars in around ’68. The Japanese affection for Mosrites was no surprise, since the band most associated with Semi Moseley’s guitars was the Ventures, who were enormously popular in Japan.
{ "thumbImageID": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "defaultDisplayName": "Ernie Ball Music Man StingRay5 Special H Rosewood Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "HD Yellow", "sku": "sku:site51500000222156", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow-1500000222156.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-HD-Yellow/L26865000005000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Vintage Tobacco", "sku": "sku:site51500000221730", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco-1500000221730.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Vintage-Tobacco/L26865000001000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Classic Natural", "sku": "sku:site51500000221728", "price": "2,199.00", "regularPrice": "2,199.00", "msrpPrice": "2,200.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural-1500000221728.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Classic-Natural/L26865000002000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Ivory White", "sku": "sku:site51500000221731", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White-1500000221731.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Ivory-White/L26865000004000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "Preorder", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Chopper Blue", "sku": "sku:site51500000221729", "price": "2,099.00", "regularPrice": "2,099.00", "msrpPrice": "2,100.00", "priceVisibility": "1", "skuUrl": "/Ernie-Ball-Music-Man/StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue-1500000221729.gc", "skuImageId": "StingRay5-Special-H-Rosewood-Fingerboard-Electric-Bass-Chopper-Blue/L26865000003000", "brandName": "Ernie Ball Music Man", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
Fujigen went on to achieve lasting fame as the manufacturer of Greco guitars in the ‘70s and Fender Japan in the ‘80s and early ‘90s. But Fujigen’s work in the ‘60s is our focus. The Fujigen hardware is the easiest way to tell these guitars apart from Teiscos. For example, Fujigen embossed "mic 1" and "mic 2" into their metal control plates, while Teisco did not. This is just one example, but it requires a bit of reading and studying about the nuances of that hardware to positively identify the Fujigens for what they are.
The ghost Hexpander MIDI interface system adds MIDI capability to almost any guitar or bass.  Plug your guitar into pitch-to-MIDI converters by Roland or Axon and enter the MIDI sound universe.  The Hexpander MIDI interface provides responsive and accurate tracking unequaled be any other system on the market today.  Check out how affordable and easy it can be to make MIDI part of your music making.
This book teaches you how to visualize the notes, which will lead quickly to remembering them. Once you know where the notes are, forming chords becomes easier, which leads to fluid playing in any position. At the very least, if you can identify your root notes, you can bail yourself out of trouble at any time. That skill for resolution serves you in improvisation and the random jams that will provide much of your growth.

The Takamine brand helps prevent big brand manufacturers from setting their prices too high - by showing them that great guitars can be produced at reasonable prices. On top of their bang per buck reputation, Takamine is considered as the pioneer of installing built-in pickups into acoustics, something that is now a common configuration offered by majority of guitar builders. The Takamine P3NY showcases how impressive tonewoods and electronics can be implemented without ridiculously jacking up the price.

The reason why you would want to have one of these on your pedalboard is simple. An EQ pedal allows you to adjust a variety of frequency bands and shape your tone based on your own requirements. As you evolve your skill and knowledge, you will soon realize that you can’t play without a pedal of this type. When it comes to some notable models, Empress ParaEQ comes to mind as the best choice.
In 1967 Vox introduced a series of guitars which featured built in effects such as Distortion (fuzz tone), Repeat Percussion (percussive tremolo), Treble/Bass Booster and a wah-wah operated by the heel of the picking hand pushing on a spring-loaded lever over the bridge. The Delta phantom style guitar and bass, the Starstream teardrop 6-string, and Constellation teardrop bass had such effects.

While a little on the pricey side, their products are seen as particularly powerful and reliable overall. The H&K Trilogy is well appreciated for its versatility, allowed by the high level of German technology and engineering involved in its construction.  It has easy MIDI control and three channels, a clean, crutch, and lead, all with boost options that give a lot of freedom to musicians who are into experimenting.

Adjusting saddle height couldn’t be easier on a Les Paul. Since the bridge can only be adjusted at each end, there is no need to adjust each saddle individually. Firstly check and, if necessary, adjust the low (thick) E string height. Do this by adjusting the height of the bridge at the thick E string end. This is done by rotating the thumbwheel anti-clockwise (counter-clockwise) to raise the bridge or clockwise to lower it. You might be able to do this with just your fingers, but chances are you will need to use pliers. Be careful if you use a tool as it is easy to slip and damage the finish on your guitar. Alternatively you can slacken all of the strings and use your fingers, although this is a very time-consuming process. Finger method
Rosewood » The diminishing supply of Brazilian Rosewood has led to Indian Rosewood replacing it in most markets. While the two look different, the tonal quality is virtually the same. One of the most popular and traditional woods used on acoustic guitars, rosewood has been prized for its rich, complex overtones that remain distinct even during bass-heavy passages. It's cutting attack and ringing tones make for highly articulate sound and plenty of projection. Rosewood is also a popular choice for fingerboards and bridges.
At its core is a combination of solid spruce and maple, which gives it a subtly brighter tone when compared to conventional spruce and mahogany body acoustics. To retain as much of the guitar's acoustic body as possible, Epiphone equipped the Dove Pro with discrete Fishman electronics, with controls that are mounted on the underside of the sound hole.
Just so you know, if you’re not a big fan of black electric guitars, Davisson has rolled out several colors like blue, vintage sunburst, red and pink for you to choose from. My choice was classic black, though! Now, my first impression of the 39” guitar as I unpacked it, was of sheer wonder. I mean, it was really tough to visualize the sturdy construction in terms of the menial cost. Of course there are letdowns, such as the body that is made of basswood instead of maple (that is used in premium guitars), which gives you sort of a mediocre feel. Even the material used for crafting the chrome bridge, humbucker pickup, pickguard and strings, is pretty average. But if you look at the overall feel, design and ergonomics, this model definitely deserves a round of applause!
A very useful way of creating space for guitars in the final mix is to use tunable high-pass and low-pass filters to remove extreme frequencies that do nothing to enhance the guitar tone, but invade the space of other instruments that do perform in those areas. Generally speaking, it’s worth losing everything below 80Hz, although it’s not unusual to set the filter a good degree higher. Shaving off some high end may also be useful to help place the guitar in a specific area of the audio spectrum. Filter at the mixing stage, as the sound of the recording will often determine the optimum filtering points.
There’s a lot of knowledge here to digest, so the best advice anyone can give you is not to sweat it too much. You aren’t going to become a pedal encyclopedia overnight, and even if you could, you’d be missing out on the fun experience of trial and error that comes with figuring out your first pedals. The truth is that some of the most distinctive guitar and bass effects ever recorded have been the result of artists experimenting with effects units they’d never used before – especially in the 1960s, when pedals were brand-new to everyone.
Unfortunately, National’s line of instruments was not well diversified and, as demand for the expensive and hard-to-manufacture tri-cone guitars began to slip, the company realized that it would need to produce instruments with a lower production cost if it was going to succeed against rival manufacturers. Dissatisfaction with what John Dopyera felt was mismanagement led him to resign from National in January 1929, and he subsequently formed the Dobro Manufacturing Corporation, later called Dobro Corporation, Ltd, and began to manufacture his own line of resonator-equipped instruments (dobros). Patent infringement disagreements between National and Dobro led to a lawsuit in 1929 with Dobro suing National for $2,000,000 in damages. Problems within National’s management as well as pressure from the deepening Great Depression led to a production slowdown at National, and this ultimately resulted in part of the company’s fractured management structure organizing support for George Beauchamp’s newest project: the development of a fully electric guitar.[5]
A standard Squier Stratocaster is mass-produced in factories located in Indonesia or China. For its construction, Squier usually uses woods readily available in those countries, such asagathis and basswood. They also use stamped metal hardware and multiple pieces of wood in construction to reduce waste and to lower costs. In some cases, the body is laminated, much like a plywood, rather than consisting of two or three solid pieces glued together.
Fender, or the Fender Electric Instrument Manufacturing Company, as it was properly known, was started in 1946, in Fullerton, California, by Leo Fender. The early designs effectively wrote the book on the solid body guitar manufacture; his approach of simple guitars using quality parts, easily assembled (most specifically the replaceable neck) proved an immediate sucess. Guitars like the Fender Stratocaster, Telecaster, Jaguar and Precision bass have barely changed since their very first inception; Fender simply got it right first time round.
What’s the point in having these lists anyway? There’s always going to be anger over people who were left out/included on the list when they didn’t deserve to be… And to say that any of the musicians mentioned so far aren’t talented is ridiculous, there’s no limit in the world on how much talent there is, so why does this list have to be limited to 10? Just saying…
In 1928, the Stromberg-Voisinet firm was the first company to sell an electric stringed instrument and amplifier package. However, musicians found that the amps had an "unsatisfactory tone and volume, [and] dependability problems", so the product did not sell well. Even though the Stromberg-Voisinet amp did not sell well, it still launched a new idea: a portable electric instrument amp with a speaker, all in an easily transported wooden cabinet. In 1929, Vega electrics launched a portable banjo amplifier. In 1932, Electro String Instruments and amplifier (this is not the same company as Stromberg Electro Instruments) introduced a guitar amp with "high output" and a "string driven magnetic pickup". Electro set out the standard template for combo amps: a wooden cabinet with the electronic amplifier mounted inside, and a convenient carrying handle to facilitate transporting the cabinet. In 1933, Vivi-Tone amp set-ups were used for live performances and radio shows. In 1934, Rickenbacker launched a similar combo amp that added metal corner protectors to keep the corners in good condition during transportation.[1]
Another way to set up your pedals is by placing them within the effects loop of your amplifier.  An effects loop is an audio input and output loop that is placed after the preamp and before the power amp section of your amplifier, using the Effects Send and Effects Return jacks. On some amplifiers, these can be labels Preamp Out (Effects Send) and Power Amp In (Effects Return).  Not all amplifiers have effects loops, but those that do allow for you to place some of your effects within the loop.
Adjust the volume and tone and engage the gain when you want to bust out some distortion riffs or throw your headphones in via the 6.3mm Jack headphone output which also doubles up as a preamp out. Enjoy silent practice anywhere or hook it up to your audio interface for studio recordings. A powerful little amplifier relied upon by guitarists when inspiration strikes. At under £30 it’s actually an essential purchase for musicians and one of the best music gifts ever – it’s certainly cheap, but it certainly doesn’t suck! Available in a range of different colours and as a double stack for extra volume.
Check out, for instance, this rare bird. A 1966 Wurlitzer Gemini, made at the Hollman-Woodell guitar factory in Neodesha, Kansas. Part of Wurlitzer’s THE WILD ONES series (which included the more pedestrian-looking, but still pretty rad Cougar and Wildcat models), these were made to compete with the best of the domestic market. High end tuners (Klutsons), a wonderful chunky bound neck (like a Fender V shape, but a bit thicker), and a great look highlight the Gemini.

Being one of the reputed organizations, operating in this domain, we are engaged in manufacturing and supplying a quality range of Gigmaker Electric Guitar. We only use high grade components and latest technology while designing these guitars. The offered range is widely appreciated all over the nation for its salient attributes. With our quality range, we

So, what string gauge is standard for electric guitars? Most new guitars come strung with super-light or light-gauge strings. For beginning guitarists, that’s probably a good place to start. As you develop fretting and picking skills and your fingers gain calluses and strength, you may want to gradually move up to heavier strings, depending on the music you play and the tone you seek. Many guitar manufacturers make specific recommendations about what strings to use. Some produce their own strings or have them custom-manufactured to their specifications.
Most of the time, a chord diagram will not show you the finger numbers. They will leave that up to you, because different people sometimes play chords differently. Some people cannot play an A chord like this, because their fingers are too big, and this fingering is very cramped for them. Instead, they play an A with a mini-barre, using the same finger for more frets. For example, I could bar my 1st finger across the 4th, and 3rd strings at the second fret, then place my 2nd finger on the 2nd string, second fret (see image on the left). This gives me more room between the frets, and also frees up my 3rd and fourth fingers to pick out melody and bass notes. It’s just a preference, you can play the chord how you prefer.
If your interests are on the jazz side of things, the Ibanez Artcore series is worth a close look. These economical hollow-body guitars are perfect for players at any level who want a well-crafted instrument that won't break the bank. They come with a well-deserved reputation for solid stone and sustain and they hold tuning reliably, making the Artcore guitars a good choice to get the most bang for your buck.
{ "thumbImageID": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "defaultDisplayName": "Rogue Starter Acoustic Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Blue Burst", "sku": "sku:site51275425409510", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Blue-Burst-1275425409510.gc", "skuImageId": "Starter-Acoustic-Guitar-Blue-Burst/519266000030000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Walnut", "sku": "sku:site51275776901291", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Walnut-1275776901291.gc", "skuImageId": "Starter-Acoustic-Guitar-Walnut/519266000115000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Pink", "sku": "sku:site51275776901306", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Pink-1275776901306.gc", "skuImageId": "Starter-Acoustic-Guitar-Pink/519266000218000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51275776901295", "price": "49.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Black-1275776901295.gc", "skuImageId": "Starter-Acoustic-Guitar-Black/519266000001000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Matte Natural", "sku": "sku:site51275425409512", "price": "59.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Matte-Natural-1275425409512.gc", "skuImageId": "Starter-Acoustic-Guitar-Matte-Natural/519266000049000", "brandName": "Rogue", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Red Burst", "sku": "sku:site51275776901310", "price": "45.99", "regularPrice": "59.99", "msrpPrice": "99.99", "priceVisibility": "1", "skuUrl": "/Rogue/Starter-Acoustic-Guitar-Red-Burst-1275776901310.gc", "skuImageId": "Starter-Acoustic-Guitar-Red-Burst/519266000224000", "brandName": "Rogue", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
After you have the hang of mono and stereo miking, room miking, and air guitar, you may be ready for the final frontier of El Gtr exploration. The time-consuming technique that I call "multisourcing" combines all the aforementioned methods, multiplied by the infinite possibilities created by splitting the guitar output and sending it simultaneously to different amps (using, for example, a Whirlwind Selector splitter box).
I'm also retarded. And my father used to beat me with my decca.... Im also the ex-ceo for decca inc. Your guitars are worth mere pennies.... litterally, Deccas were originated in the late 60s for young children to pretend to be their idols.. Deccas were packaged in cereal boxes as ready-to-go kits.. you assembled them yourself... they are made from old left over popsicle sticks.. So Im glad to put your high hopes and sleepless nights of wondering whos going to come up to you and tell you your old guitar is rare and worth thousands... Because frankly it will just never happen..
If you are buying a guitar for a kid, it might be good to know that there are smaller electric guitars especially for children. If it’s a small child, it might be really difficult to reach on a full-size guitar. The best way of determining what size you need is to try different sizes in a music shop or ask the guitar teacher what he or she recommends. If your kid grows quickly and you can’t be bothered or can’t afford to get a new guitar every year there is always the option of renting a guitar until your kid is big enough to play on a full-size guitar.
Guitar lessons work best if you're putting your skills together to learn how to play songs. That's why Guitar Tricks has a ton of great song tutorials for when you've mastered the Core Learning System, or if you want to try something new. These easy guitar songs are great, especially if you're a beginner that recently picked up an electric guitar. 

Martin ukuleles produced in greatest numbers in the smallest soprano size, but concert and tenor sizes were available circa 1922. Concert and tenor models were available in all the following styles, with the exception of Style 0, which was produced only as a soprano. Custom order ukuleles, while rare, were available upon request, and may have combined features from various styles.
In about 1975, Ernie Briefel and Merson parted company with Unicord/Gulf + Western, becoming Music Technology Incorporated (MTI), on Long Island, taking the Giannini brand with it. Later, in the early ’80s, MTI would import Westone guitars made by the great Matsumoku company, which it would sell until St. Louis Music began its partnership with Matsumoku and, in 1984, transitioned its Electra brand to Electra-Westone and then ultimately Westone, which lasted until 1990, when SLM’s guitars all became Alvarez.

Finally, the Univox 1085 PA Amplifier System ($1,035) was another piggyback with 10 tubes, 105 watts, four channels, eight inputs, external echo or equalizer connection, four volumes plus master volume, bass, middle, treble, presence, reverb with footswitch, and a cabinet with four 15″ Univox speakers with 20-ounce Alnico magnets and 2″ voice coils. It also had 12 high-frequency horns with crossover networks, usually used with two cabinets.

The Neoclassical Speed Strategies for Guitar is another book we’d recommend more for the seasoned player. This one provides an excellent introduction into fingerpicking with helpful illustrations of exactly how to position yourself for the quickest and most efficient playing. It includes lots of helpful examples and exercises to make it easier to master.
I'm no musician, know very little about guitars, but I think I stumbled on to a great deal. The predicament we faced last Christmas was that my two nieces, ages just 7 and 5, both fell in love with a toy "music" setup consisting of a plastic "guitar" and a fake microphone. I won't say the famous girl-toy-brand name it was marketed under but it was pretty much a collection of junk. The "guitar" had a few buttons on it to make noise... it would have been broken and tossed away inside of a week. And here in Costa Rica - a price of 34,000 colones or roughly $70!
The golden question is: What is the difference between acoustic and electric guitars. The primary difference between the two types of guitars is that acoustic guitars produces sound entirely through vibration. Its sound is emitted through the vibration of the string when it’s plucked back and forth. Electric guitars, on the other hand, are powered through electricity and electromagnetism generated through its components are what drives the sounds that come out of it.
The first thing that strikes you about Nate Savage’s Guitar Lessons YouTube Channel is how well the structured, numbered lessons are organised on the YouTube Home page itself. Overlays on the opening titles screens and the names of the lessons make it very clear about the content and help you to choose exactly what you need, or let you skip over any unnecessary stuff. His complete beginner topics go right back to “How To Hold The Guitar” which might sound really basic, but Nate’s absolutely right to nip any bad habits in the bud at the very beginning and that particular video could the most important 3:26 of your career. And I have to make mention of the high production levels on Nate’s videos. The vision and audio is excellent, the lessons are well made, and Nate’s friendly, easy-going manner makes you feel like he’s your best friend and guitar tutor at the same time.
It’s important to note in this discussion that loudness, generally measured with decibels, could potentially be labeled “good” or “bad” in so far as certain levels are known to usually produce pain in humans. For example, the United States government’s Occupational Safety & Health Administration (OSHA) regulates how employers and workers behave around noise levels that approach 85 decibels. As music fans, we may boast about how the Slayer concert caused our ears to bleed, but sling a jack hammer or stand under 747 jet engines for eight hours a day and see how fun those loudness levels are. But that’s volume, not quality of tone.
So I was all, "oh no...I want this one." So I did leave with it, and without even asking they sold it to me at less than the price on the thing because it was the demo and had a tiny belt buckle type scuff or two on the back. I think I actually wound up saving a few hundred dollars. I don't know if they figured a percentage of the total should be knocked off, or what.
This guitar has a mahogany neck topped by a 20-fret rosewood fingerboard. It has a scale length of 25.62", while the nut width is 1.69". Since the AW54 is from Ibanez, you can expect the neck profile, string action and overall playability to be comfortable and beginner friendly. Wrapping up this affordable guitar's premium-like specs is its Open Pore Natural finish, which gives the instrument an earthy appeal that's easy on the eyes.

Thanks for the post on ’66 Deccas and the video. I have a red sunburst DMI-203 with the chrome pick guard as in your picture. My first electric guitar in 1966 was the same instrument with no name on the headstock but with paperwork saying GHI/Heit. Bought it in a department store plus a Concordia amp for $50. Sold it in ’69 when I needed cash for a car (for $75!). I picked up the Decca about 10 years ago. Vintage Guitar magazine did an article of some work done on it in it’s Jan. 2014 issue.
How about comparing the guitars only by the sound alone. Especially when overdriven playing in the realms rock and plug on the same amplifier or using the same set-up. Arguably there are many guitarist would find less expensive guitars are not bad at all. That they are also very much capable of producing the needed dirty tones and also able to produce a decent smooth clean sound to let players go out there and play.
Possessing great look and feel, the LyxPro, the amp is small and would work best for headphone, something that is normal with beginner instrument. It also features a digital clip-on tuner that is so perfect for tuning the 6 strings that are designed on the rosewood fretboard. The Canadian maple neck also compliments the rosewood fingerboard and the overall solid wood body finishes for greater sound quality.
The output transformer sits between the power valves and the speaker, serving to match impedance. When a transformer's ferromagnetic core becomes electromagnetically saturated a loss of inductance takes place, since the back E.M.F. is reliant on a change in flux in the core. As the core reaches saturation,the flux levels off and cannot increase any further. With no change in flux there is no back E.M.F. and hence no reflected impedance. The transformer and valve combination then generate large 3rd order harmonics. So long as the core does not go into saturation, the valves will clip naturally as they drop the available voltage across them. In single ended systems the output harmonics will be largely even ordered due to the valve's relatively non linear characteristics at large signal swings. This is only true however if the magnetic core does NOT saturate.[45]
The Seismic Audio SADIYG-02 is based on the iconic Telecaster electric guitar. It comes with a single-cutaway body that's crafted from paulownia, a China native wood that's known for being light. The pickguard is already set into the body when you get the package, but you'll need to solder the input jack, the volume and tone knobs, the bridge pickup and the selector switch before you start using it.

Schecter is a really great guitar brand. When I was looking for my electric I searched through many guitar brands most of which are on this list and the only one that really felt right in my hands was the Schecter I play. Its got awesome tone quality, gorgeous body design and fret inlay along with very nice balance and it will stay relatively in tune for up to a few days at a time without the pegs slipping. Great for metal and rock and even really lots of other genres as well. Performs very well it should be at least top 5 if not top 3.
The Fender Mustang II V2 40w Guitar Amplifier Combo is an extremely versatile modelling amplifier that comes complete with 8 amp models, 37 effects, and 24 onboard factory and user presets. So, you’ve got a huge amount of different sounds to play with! It’s like having 18 amplifiers in one easy to carry box all pumping out through a powerful 1 x 12” fender Special Design speaker – great for gigs and studio use!
For guitarists looking to gig, this is the best category to start shopping in because stepping into the sub-$300 range offers some great diversity as well as real stage-worthy power. As well as improved solid-state combos, amp heads and tube amps become more readily available in this range, even if they are a little basic. Some very powerful modeling amps are available too, such as the Line 6 Spider V 60, which packs a stage-worthy 60 watts of power, with more than 200 amps, cabs and effects models built in.
While electric guitar manufacturers like this are often more expensive, they do provide a level of customization that isn’t available with several mainline models. Most companies of this size can have a casual email or phone conversation with you, take a few notes about how you want your guitar setup (probably jotting it all down with pen and paper) and then making a guitar to your exact specifications.
There are continuous debates on various topics that I am often asked to contribute to with my opinion. I usually decline, because it’s rarely important what my opinion is when it comes to the instruments I produce – it has to be the musician’s opinion that counts. So let’s start by the question “Which tonewood is the best” and just answer it with “The tonewood that gives the musician the sound and feeling he or she is after” and then we can leave it at that.

Bottom Line: The Boss ME-80 seems to be aimed at the beginner and intermediate guitarist who is getting into the effects game. What guitarists love about it is that it tries hard (and succeeds) at replicating the feel of messing with a pedalboard full of effects. Unlike the Line 6 POD HD500X, you won’t need the manual! We’re not necessarily taking a dig at the Line 6 pedal - that one very much has its merits, is FAR more customizable and editable, and arguably the effects and amp modeling sound a bit better. The Boss ME-80 is just a different style, and judging by the user reviews we read people really enjoy having all the knobs for all the effects immediately available. The Boss ME-80 is also a tremendous bargain considering how powerful it is. Sure, it’s not exactly cheap, but it’s a very well-made, intuitive, nice-sounding all-in-one multi-effects pedal which is great for practice, studio recording, and live use.

As a conservative approach to using steel string, one thing is pretty much for sure; if a Martin came from the factory with a Belly bridge, it is braced for steel strings. If it has a rectangle bridge (and was made before 1929), the bracing needs to be checked by a qualified repair person to determine if the guitar's bracing can handle steel strings. My personal opinion is if it's a style 18 or higher and has a rectangle bridge and was made before 1930, it's not really made for steel strings. Though 1927 is generally thought of as the year when most models were braced for steel strings, 1927-1929 models could be braced for either steel or gut strings. So before putting on steel strings on a 1927-1929 Martin, have it check out by a good repair person. They will check the top's firmness, bracing dimensions, and bridge plate thickness.
I started playing & kinda grew up then (although my wife would dispute the 'grew up' part). We used to play mostly 9s or 10s. It depended on the quality of the neck on the guitar we could afford. A good guitar neck/fret job would let you go to the lighter 9s. You couldn't get all the great pedals then, so sustain was often achieved with some feedback, which is a product of TURNING UP the volume. Lighter strings seemed to feedback more easily. Lighter strings don't last as long as heavier ones, so unless you love re-stringing, 10s are a good compromise. I think Billy Gibbons still plays 8s, but he has a guitar tech that probably changes them for every show.
As technology for manipulating VSTs improves - such as piano roll editors replacing step sequencers and more advanced GUI's allowing faster access to more expressive voicing collections -- and as increased processing power eventually paves the way for simulated rather than sampled guitar sounds -- guitar VSTs will inevitably play an ever increasing role in music production and musical enjoyment. They will never be guitars, never offer the original expressive inspiration of a guitar strapped over the shoulder, powering a wall of sound or launching delicately nuanced resonances through waves of wood-fired warmth in the serene, silent air of a snow-covered mountain cabin, but it's a safe bet guitar VSTs will become just as much a force in music as pitch correction and lip syncing have become major players in the large-venue live performance business -- and in amateur musicians' collections of creative panacea for the stress and toil of daily life.
Here's some net info you may find interesting. Some of the first Kents to have been imported into the U.S. were made in Sweden by Hagstrom. (They may have actually been Czech-made and sold by Hagstrom.) The Hagstrom HI, HII, and HIII (those are the letter H with roman numerals representing the number of pickups the guitar had) were branded Kent for sale in the U.S. and as Futurama for the U.K. They had the Kent name on the headstock and sometimes the upper bout. They were similar to Fender Stratocasters. They also made some Strat-shaped basses. According to an article in Vintage Guitar Magazine, importation of Hagstrom-made Kents began in 1962. Another story is that Hagstrom sold Kent-branded guitars through distributors other than Buegeleisen & Jacobson in the U.S. without permission from J&B and were forced to withdraw them after a short time. By then Hagstrom had become better-known and could sell them under their own name, anyway. At first, the idea was to keep ’em cheap and sell to the beginners and students. Later, as Japanese manufacturers proliferated and competition became hot and heavy, some of them began to copy the Fenders and Gibsons of the time. As quality began to improve, some manufacturers again began issuing thier own designs. One of the “beginners” who got a start with a Kent Polaris I was Bruce Springsteen. Alex Lifeson of Rush got started with a Kent acoustic. One of Gene Simmons first guitars was also a Kent. The BBC series “The Seven Ages of Rock”, episode 2, showed Lou Reed (R.I.P) with the Velvet Underground playing a Kent 532 Copa at Andy Warhol’s hangout. Kent created a vib then and they're still doin it today.
I remember the first time I saw Eddie Van Halen on MTV, the way he played two hands on the fingerboard during his short “Jump” guitar solo. I loved his cool “Frankenstein” guitar, so named because he cobbled together a variety of guitar parts and decorated his creation with colored tape and paint. Even as a 13-year-old who grew up primarily listening to, and playing, classical music, I felt compelled to run out and buy his band’s “1984” LP at my local Tower Records store.
{"pageName":"[gc] pdp: ibanez artstar as153 semihollow electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event34,event3,event45,prodView","evar51":"default: united states","list1":"24-month,36-month,60 month","prop5":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop6":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop3":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","prop4":"[gc] shop: guitars: electric guitars: semihollow and hollow body electric guitars","products":";H91419;;;;evar65=Blemished-Guitars-Ibanez","channel":"[gc] shop","linkInternalFilters":"javascript:,","prop7":"[gc] product detail page"}
Straight away, we have to talk about how good this guitar sounds. Lots of low-end and mid-range acoustics tend to do one tonal area well, but the Martin DRS2 does an awesome job all round. It’s got deep, booming lows, while the highs remain nice and crisp. And of course, all of this is available acoustically or electrically in the dreadnought cutaway acousticelectric guitar.
ESP Is simply the best brand you could ever use, from it’s awesome quality ESP too their good quality/price realtion with LTD. You can use an LTD distressed series for playing classic rock, for blues also, and the Xtone series make their work too, and from their LTD standard and deluxe series to their ESP standard and signature series for the best and widest range of metal you could ever imagine, with them you can from Black Sabbath or Ozzy Osbourne, to Metallica and Children of Bodom. (Kirk Hammett, James Hetfield, Alexi Laiho, Henkka, Michael Paget, Gus G, Tom Araya, Jeff Hanneman and almost any japanese guitar and bass player that is considered good [Seriously, without exagerations or lying] endorses ESP guitars and basses).

In the early 1980s Collings decided to move to San Diego, California but never made it further than Austin, Texas.[3][4] He started out sharing work space with fellow luthiers Tom Ellis, a builder of mandolins, and Mike Stevens. A few years later he decided to continue on his own and take the craft more seriously, moving into a one-stall garage shop.
After making your observations about the curve in the neck, make your adjustments of the truss rod, if necessary, until you have the amount of forward curve you are looking for. In the best case scenario this will mean that you end up with a slight forward profile, when fretting the 1st and 12th frets, usually no more than 1/32", focused in the 6th-7th fret area and tapering towards flat in either direction.

It is a great budget guitar but not very much useful if you want to play this at an advanced level. Actually, this is an ideal and the most popular electric guitar for intermediate players; also it's suitable for the beginners. So make sure you upgrade your guitar once you master the basics of using this guitar. Find out the latest price of this guitar using the button below which takes you to the Amazon product page of this model and tells you all the information about it.

i am writing this now because i can't even look at this guitar without thinking about this experience, and still can't enjoy playing this very expensive and special vintage piece. i went to great lengths to get all the way to this shop, it was extremely difficult, several trains, a really long walk. then i waited a truly insane 3 months, and then went to the same lengths to pick it back up. he did say to me to bring it back, but that was impossible. never in my life, in NY or LA, or anywhere in between have had to wait more than 1-2 days for any service on any guitar. in my experience he takes on way more work than he can handle and apparently doens't do a thorough job. 3 months is obscene. 1 month is unacceptable. bad experience, 100% waste of time & money. if he refunded my money it would not come close to the amount of time i had invested in getting here & back. truly negative experience. waste of much time.
The original Fender Mustang is something of a cult classic. It was loved by alternative bands and players - including Kurt Cobain - in the '90s for its short scale, affordability and potential for modding. The Bullet Mustang is the most affordable version of the model yet. In keeping with Squier’s other entry-level models, it features a basswood body, which gives it an incredibly lithe, lightweight feel. This, combined with its 24-inch scale length, makes it a great choice for beginners. The two humbuckers are the most obvious departure from the original, providing angular grit in the bridge position and a pleasing, earthy warmth in the neck. The bolt-on maple neck and six saddle hardtail bridge feel reassuringly rigid, while the tuners did a sterling job in our tests of holding their pitch without too much hassle. The volume and tone knobs, often a clear indicator of quality control in budget guitars, are installed firmly enough with no evident wobble, while the pickup selector switch is angled so it won’t get knocked if your playing becomes too... ahem... enthusiastic. Meanwhile, the 12-inch radius, rosewood ’board is pancake flat and makes string bends simple for even the most sausage-fingered player. The C profile neck is also extremely comfortable to hold, while the satin finish makes fretboard-spanning licks a doddle. $149/£120 is practically peanuts to spend on a new guitar. For Squier to cram in the features it has, with the overall levels of build quality on display, is seriously impressive.
Here we have a wonderful made in Japan Takamine from a while back in 1990 this makes it officially a Vintage guitar next year but its tone sounds rich and vintage now! As you will see looking her over this F349 is GORGEOUS!.... better than average condition in all aspects... few only minor doinks here or there but NOTHING to detract from this Taks sound - playability or sheer playing enjoyment... Excellent ALL Mahogany build construction, high AA grade mahogany, masterfully built - fit and finish excellent, neck angle is excellent so action is very good so playing is a breeze and quite enjoyable not all can state this...its 1-11/16ths at the nut so its a nice feeling medium profile " C " shape, frets are very good - excellent can barely tell its been played in fact if you polish them they will be as new...beautiful quality rosewood fingerboard no dead spots or funny buzzes noted...This guitars wood still shines like glass and overall is an outstanding original example with an addition of the best sounding Piezo transducer cleanly installed if I didn't tell you -you may not have noticed but she is also fully electric and sounds amazing amplified I played her threw my Princeton Reverb amp and it truly sounds bold & rich and rings like a bell with the newish Martin strings I installed (I have played this guitar in my office for a short while ) so they should be done stretching and are clean and ready to perform. This guitar is nearing 25 years old so don't expect a brand new guitar this is a beautiful vintage guitar and has personality and patina of a well treated well loved professional grade instrument. Its in excellent vintage condition. JVG Rated 9/10. If you want a rich sounding great playing fun vintage Japanese Dreadnought guitar well this one should put a grin on your face when you open her up and see it. Enjoy! Let me know if interested thanks for looking. Joe contact us at:

Read Full Review The brand ESP that we all know today started its roots as a shop in Tokyo Japan selling custom replacement parts for guitars that quickly gained a good reputation for its high quality. Soon came after the brand manufactured fully assembled guitars that burst in the trash metal seen of the 80’s signing in big name bands to carry their guitars and basses.

Modulation stompboxes like our BF-3 Flanger should be after the tone-producing effects like distortion, wah, etc. so they can process and modify the tone built by the pedals before it. If you put it before the distortion, then you are distorting the sound of the flanger. Maybe that’s what you’re after, but in general, put the BF-3 and other modulation effects after the tone-shaping (and noise–producing) pedals. And then there are the ambience effects: delay and reverb. As we discussed earlier, reverb—and sometimes delay, depending on the space—is the last thing that happens before the sound reaches your ears in a physical space, so these go last. Delaying reverb can sound muddy, so it’s usually better to have the reverb after the delay.

Actually it was a rolling stone interview, I don’t remember the exact issue but the reply was Rory Gallagher. I’ve also heard it was Phil Keaggy which is unlikely because he was relatively unknown when Hendrix was alive. I’ve also heard it was Terry Kath, Billy Gibbons, and Eric Clapton. I do know that Hendrix said his favorite guitar player was Gibbons, because he just couldn’t get that sound that Billy gets. As for the Quote……. maybe it’s just folklore… The most likely correct answer is Rory Gallagher though…. it’s even referred to in Rory Gallaghers biography and the actual issue of the rolling stone interview is listed in there. I’ve never heard anyone say that the quote was with Jerry Reed though. But, Jerry Reed is an AMAZING guitar player. He actually wrote alot of Chet Atkins material. As for misquoting Hendrix you may not want to be so quick to point fingers…. I’m pretty sure yours is wrong. 😉

If you’re looking to get this pedal as a first in your arsenal, then don’t worry at all, you can keep it simple with the offered Reverb dial as it offers high-quality effects which you can tune to your liking. This astonishing “stomp-box” by TC covers guitarist’s needs who possess different ranges of experience, all available at a fantastic startup price.

Here’s one more British amp company, and one that might fly a bit under the radar for a lot of guitarists. Check out the Ironheart, Lionheart, VH and GH series for awesome British tube sound. Laney’s Linebacker or PRISM series of modeling/emulation amps might be just what you need if you’re in a situation where you have to nail a lot of different tones. No matter what your style or genre there is probably something in the Laney lineup to meet your needs.

The Jasmine S35 acoustic guitar has its share of criticisms, most notably its heavier strings and bargain basement appearance, but what keeps it popular with customers is the starter kit. Other entry-level acoustic guitars rarely include the accessories that the Jasmine S35 offers. It is also valued as a good back-up guitar for advanced players who want a dependable spare on hand during performances.

It features a solid mahogany top, supported by laminate mahogany back and sides, which gives a warmer tonality and a very earthy vibe. It also comes with Graphtech NuBone nut and saddle, a premium feature that you normally have to pay extra to add into your guitar. Giving this guitar its amplified voice is a Fishman Presys II 301T electronic pickup/preamp system that comes with a built-in tuner. On top of all that, the Washburn WL012SE does not skimp on ornamentation, which includes the Washburn Parquet rosette and rosewood bindings.
It is rare for any brand, let alone an entire company, to stay in business this long and their longevity speaks volumes to the exceptional quality of their instruments. Although they did dabble in electric guitars and basses for a short time, today the company is dedicated to making the finest acoustic guitars possible just as they were over 180 years ago.

If you choose, every hole is drilled for each component, including neck, bridge, pickguard and strap button mounting holes. If you choose the optional snap together wiring, then no soldering is required; all electronics connect together with easy to attach connectors. We have done most of the hard work for you! The body needs finish sanding only but should require no filling.
Extremely long delay times form a looping pedal, which allows performers to record a phrase or passage and play along with it. This allows a solo performer to record an accompaniment or ostinato passage and then, with the looping pedal playing back this passage, perform solo improvisations over the accompaniment. The guitarist creates the loop either on the spot or it is held in storage for later use (as in playback) when needed. Some examples of loops effects are:
Discrete models describing the low frequency behavior of stringed instruments have appeared in the technical literature for more than 25 years. These models are very useful in understanding the nature of acoustic-structural interaction, but only when they are correctly tuned to match the measured response of a particular instrument. The tuning process is easiest when FRF measurements are made... [Show full abstract]
INSTALL "UNDER SADDLE" PICK UP - $100.00 and up. Expand endpin hole to accommodate jack. Wire pickup to pre-amp and jack. Fit and re-size old saddle for proper action and contact with pickup. May require new saddle and re-rout of saddle slot(additional). There are other variables relating to pre-amps which must be individually quoted. Condition of bridge and neck angle may be factors in the appropriateness of an under the saddle pickup.
I bought a Yamaha EC-10 classical at a garage sale for $5.00. It was still in the cardboard box and never played according to the seller. The guitar is full size and looks cool and has real good volume and good bass, but I'd still like to get more bass out of it. I'm thinking of making some modifications to my guitar so that I can fit it with actual bass guitar strings, nylon ones. A friend of mine said I'd wreck up my guitar if I did this. Would I wreck the guitar putting bass strings on it or could I make a bass out of it?
We all are now living in a great time considering the choices that we currently have. Even though it is a good thing every so often, it can actually be complicated to decide and buy the best electric guitar. If you one to have it for a serious reason, it will be realistic to own the one which comes equipped with guitar essentials like strap, carry-bag, picks, and if possible a good practice guitar amp.
A looper allows you to record a musical passage or phrase then play that passage back repeatedly. You can then record more loops and layer them, one on top of the other. Most recording and playback functions are foot controlled, and once you’ve created suitable backing tracks, you can can then play over the repeated passages in real time, creating exciting one-man-band sounds never possible before. Many of the more advanced models include built-in rhythms, custom effects, inputs for vocal mics and other instruments, plus MIDI and USB capabilities so that you can use the looper as part of your digital song-creation and recording processes.
Guitar Tuners lets you tune your guitar in seconds for free using a microphone so that you guarantee the perfect pitch of your instrument every time. Just play a note, and Guitar Tuners will display which note you''re playing, and how close you are to having that note in tune. The needle on this Guitar Tuner will turn blue you have an exact match. Just play each note on your guitar (E, A, D, G, B, E) or other musical instrument, and get in tune !
Vox's first electric guitars, the Apache, Stroller and Clubman were modelled after solid-body, bolt-neck Fenders, which at the time were not available in the UK. A four-string Clubman Bass followed shortly after. These first guitars were low-priced, had unusual TV connector output jacks and were produced by a cabinet maker in Shoeburyness, Essex. Vox president Tom Jennings commissioned the London Design Centre to create a unique new electric guitar, and in 1962 Vox introduced the pentagonal Phantom, originally made in England but soon after made by EKO of Italy. The first Phantom guitars were given to The Echoes to trial and were used by them until 1970. They were used on many of the recordings by The Echoes and records they did with other artists such as Dusty Springfield. Aside from the unusual body and headstock shapes, Phantoms featured copies of the Fender Stratocaster neck and its attachment, the Strat's three single-coil pick-ups and standard vibrato bridge that in this case copied a Bigsby unit. Aside from being a bit awkward to hold for seated playing, the Phantom guitars now approached professional quality, performance and price. Phil "Fang" Volk of Paul Revere & the Raiders played a Phantom IV bass (which was eventually retrofitted with a Fender neck). It was followed a year later by the teardrop-shaped Mark VI, the prototype of which had only two pick-ups (rather than three) and was made specifically for Brian Jones of The Rolling Stones, again using a Bigsby-like "Hank Marvin" bridge. By the end of the decade, Stones bassist Bill Wyman was shown in Vox advertisements playing a teardrop hollow-bodied bass made for him by the company, subsequently marketed as the Wyman Bass. Many guitar gear authorities dispute that he ever actually used the instrument for recording or live performance. See also Vox Bass Guitar. Vox experimented with built-in effects and electronics, with guitars such as the Cheetah, Ultrasonic, and Invader offering numerous built-in effects. Ian Curtis of Joy Division is known to have owned two white Vox Phantom VI Special effects guitars which had push button effects switches on the scratch plate. Amongst many innovations were the Guitar Organ, which featured miniaturised VOX organ circuitry activated by the contact of strings with fret contacts, producing organ tones in key with guitar chords. This instrument was heavy and cumbersome with its steel neck and external circuit boxes, and rarely worked correctly, but was a hallmark of the ingenuity of this company.
For every guitarist who’s dreamt of combining the biting twang of a Telecaster® with the sleek, ergonomic contours of a Strat, we created this limited-edition guitar: The Whiteguard Strat. Tele hardware, electronics and playing feel? Check. Ash Strat body with lacquer finish and custom-shaped white pickguard? Check. The unique style and sound you can only get from Fender? You better believe that’s a check.
Our first recommendation in this list is the epic Les Paul model by Epiphone. The Special II model of Epiphone is specially made for beginners. If you are just starting to play the guitar and looking for a good quality one from the trusted band, you can buy this one. This one is very low cost and offers a lot more features than other Gibson guitars.
We’ll round this list off with a slightly different proposition, particularly with jazz in mind. The Fender Classic Series ’72 Telecaster Thinline is a semi-hollow guitar in the guise of a traditional solid body. It features the same body shape and size of a standard Telecaster but has its horizon’s broadened thanks to the internal routing of the wood and attractive ‘f’ hole on the guitar’s top. Two humbuckers – again, not traditional on a Tele – provide exceptional warmth and versatility. Combined with its high levels of construction and craftsmanship this a guitar which will last a lifetime.
So frustrating!!!! That guy Dino!!!! Guitar exists in other type of music beside rock you meatheads!! Turn off Vh1′ top 100 countdown and try exploring some other types of music. If you play guitar and you think rock is the only style to be played…then I’m very sorry but you probably are absolutely terrible at the guitar. Hate to break it to you but compared to people like Django Rheinhardt and Chet Atkins….Eddie Van Halen and Steve Vai bloooooowwwwwww!!!!!!
These are the settings I use as my basic rack for adding rock guitar sounds in Cubase, and you might also find it handy as a point of departure, so it's worth saving as a track preset. To do this, right‑click in the audio track containing the 'rack', and choose 'Create Track Preset' from the context menu. When the Save Track Preset dialogue box appears, simply name it and save it: now you can call up your rack for any audio track in any Cubase project!
Kamico guitars were lower-priced versions of Kay's original guitars. They were among the first guitars to use a humbucker type pickup, predating Gibson by some few years.[citation needed] Produced along with Kay brand name guitars from 1931–1951, according to most sources. The most recognizable model is the Jumbo Jazz. Kay also made banjo's under the kamico name.
Amp: Gain- increases and decreases how much gain your sound has. Treble- increases and decreases high frequencies in your sound, AKA the brightness of your tone. Mids- increases and decreases the middle frequencies in your sound, AKA the 'punchiness' of your tone, if that makes any sense. Bass- increases and decreases the low frequencies in your sound, AKA how much 'thump' it has.
In the earlier days of My Chemical Romance, Iero mainly used Gibson SG's & Epiphone Les Paul guitars (most notably his white Les Paul nicknamed 'Pansy' which proved popular amongst his fans but has since been broken while onstage) and Marshall amps. He has since switched to using Gibson Les Pauls (with the Neck Pick-up removed) and occasionally uses a Gibson SG. He also used a Fender Stratocaster in the Desolation Row video. He has recently collaborated with Epiphone to design the Wilshire Phant-O-Matic guitar which he used onstage for the My Chemical Romance 'World Contamination' Tour, the Honda Civic Tour and for the Reading and Leeds festivals.

The primary difference in tone between the solid body and hollow body guitar is the high end bite one associates with the solid body guitar. From the biting rhythm of guitarist Nile Rodgers to the supersonic leads of Eric Clapton and David Gilmour, Stratocasters have found favor with so many guitarists because of their versatility and their timeless tone.
The Boss MS-3 is a multi-effects pedal that is not meant to replace your favorite pedals, rather it is meant to help you make better use of them. It has more than enough effects (112) for most musical applications, but what makes it special is its old school approach that lets you incorporate pedals and amps into your rig, along with its built-in effects.
The biggest determining factor on how easy a guitar is to play is the 'action' - distance from the strings to the neck. When it is very low it is easy to press the strings down to touch the fret; when it is too low the strings will buzz when you play. If a guitar's action is too high it will be very hard to play, and for a beginner, this can be pretty disheartening.
Tribute Legacy Electric Guitar Candy Apple Red Rosewood Fretboard. The G&L Legacy blends contemporary refinements from the Leo Fender-designed S-500 and Comanche models with classic Alnico V pickups. If your holy grail is faithful Alnico single-coil tone with modern refinements and superb craftsmanship, the Legacy makes for an excellent choice. The Legacy's vintage-spec CLF-100 Alnico V pickups have that unmistakable chime and quack reminiscent of the best examples from the late ˜50s, thanks to the work of Paul Gagon, G&L VP Engineering. Gagon found his inspiration reviewing original prints stored in Leo's private laboratory at G&L, but that was just the start. About 30 years ago, Gagon was an R&D engineer at another company when he was tasked with finding out what was so special about the early bolt-on guitars many players raved about. Gagon tirelessly analyzed many examples of what were considered holy grail guitars, spending time out on the shop floor talking to builders still working in the pickup department since the ˜50s, all on a quest to discover where the real mojo was - and wasn't. What he learned from the builders matched his own engineering analysis. You see, back in the day, the actual spec of pickups coming down that old production line varied considerably. That meant coming up with the right specs for the Legacy pickups was more challenging than simply following the prints. Gagon's persistence paid off as the Legacy garnered rave reviews from both players and magazines like Guitar Player and Guitar World. This axe is no slave to the past, however, starting with Leo's PTB (Passive Treble and Bass) system which functions on all three pickups for dramatically more variety than the vintage setup. What's more, the Legacy features a Leo Fender-designed Dual-Fulcrum vibrato, a work of engineering art which allows bending up or down with unsurpassed stability, while offering a silky feel through its beefy aluminum vibrato arm. The Legacy is...
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
Focus on the new chords you have learned and get physically used to changing between these and other chords you've learned in previous sessions. This is where you can use a metronome or backing drums to develop your rhythm and timing around these chord fingerings. Try and strum a simple sequence using these chords. Create a simple 3-4 chord song. This is about putting the theory you have learned into context.
Why We Liked It - Given the price, the hardware, and the attention to detail, this would undoubtedly be a contender for one of the best all-round choices on our list. There aren’t many other options that come from a premium manufacturer and give you all this for such a good price. The looks however will divide opinion. This is a must consider if they’re to your tastes however.

Several producers like to create larger-than-life recorded sounds by splitting the guitarist's instrument signal to several different amps, which are then recorded simultaneously. Joe Barresi is a devotee of this tactic, and uses a dedicated guitar splitter box, such as the Little Labs PCP Instrument Distro or Systematic Systems Guitar Splitter, for the purpose. "In choosing the amplifiers and speakers, it's important to remember that larger speakers give a more compact, tighter sound. A tiny amp turned all the way up will give a more blown-out sound."
Samick is a Korean guitar manufacturing company, that is known first for constructing their pianos using imported pieces. The corporation is capable of manufacturing more than one million guitars each year. They have an acoustic guitar with good quality which makes an exceptional sound. The company sell its guitars under its own brands such as Abilene, Silvertone, Greg Bennett, and Samick.
My current setup is tuner>wah>blues driver>keeley falng/delay/fuzz box>sonic max>looper. The second photo is current setup which sounds way better than original. Problem is now my flanger/phase side of my keeley won’t get loud like it used to and my loop wont let me hear what I’m playing when I lay down a riff, also when I play the loop back I can no longer play over the track.
While the modifications described above have all been passive (i.e. they don't require an external power source), active electronics considerably increase the number of possible wiring options. These can range from simple preamps that offer a volume boost and buffer the instrument's signal (to prevent loss of higher frequencies in longer cable runs), to multi-band equalisers and more.[30][31] Enterprising guitarists have even built entire effects processors into guitars, such as the Korg Kaoss Pad.[32]

We specialise in 1960s and 1970s parts and literature, relating to American and European guitars and basses. Specifically Gibson, Guild and Vox. The parts for sale on this site are sorted by brand and type, or you can search for keywords in the box above. We have a lot of parts unlisted on this site - if you do not see the part you need, please ask.

Another point to remember about ’65 Teisco Del Rey guitars. While, in reality, Japanese Teiscos were never too particular about consistency in headstock design, they at least tended to show consistency in the catalogs. The American Teisco Del Reys were even more varied, and the ’65 Teisco Del Rey catalog shows a mix of the Bizarro square Strat head (the most predominant), the new ’64 hooked design, and the older elongated Strat design. This is probably explained by the vicissitudes of stockpiles and shipping to the new American market. In any case, it makes it a bit harder to date these instruments.

Gibson produced only hollow body electrics until 1952, when the first Les Paul solid bodies hit the market. But that still left a gap. Certain players wanted a guitar with the versatility of a Les Paul, but the warmer, mellow tone of a hollow body — albeit one that could be played at high volume. A solid wood block runs through the center of the guitar’s body, allowing greater sustain and less feedback at high volumes than hollow bodies, while the winged side of these guitars’ bodies still provide for a mellow tone thanks to their acoustic resonance.

My first guitar, bought out of an advert in Kerrang over 20 years ago. I think it was branded "Axe" and it had absolutely nothing good about it. Some sort of MDF body, horribly bowed neck (couldn't be adjusted as the truss rod was broken), high frets everywhere (you could pull them out with your fingernails, fortunately), slipping tuners, hopeless bridge, hopeless nut, everything. Nearly put me off playing before I'd got started.

Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.
• Fade to Bleak: Since there are no pickups, juice or amps involved in acoustic guitar playing in its purest form, string composition – which affects how a string responds to being struck and the retention of tonal qualities – is particularly important for acoustic guitars. Bronze, phosphor bronze and coated strings tends to be the preferred varieties, ascending in price. Bronze strings start out the brightest, but lose their high voices relatively quickly. Phosphor bronze offers a darker tone, but still with a clear, ringing top and the phosphor allows the strings to produce their optimum sound longer. On acoustic guitars, coated strings trade a longer life for less brightness, but good warmth and presence.
In the vintage setup, the pickup is wired to the pot lug alone, with the tone control capacitor being attached to the output side. This tends to allow the volume to be rolled off without losing too much high end. This is great for those who play clean rhythm by just lowering their guitar volume as opposed to switching amp channels or turning off a boost pedal. It’s old-school, and it works. The downside is that the tone control sometimes has to be rotated a bit more before its effects are heard.
“If Gibson offers two pickups, let’s have three!”  This simple statement by Leo began a revolution in sound for electric guitarists by offering 3 single coil pickups instead of the usual 2 humbucking pickups that Gibson offered players.  These lower output pickups provided a thinner sound, but with more tonal variants.  Players could now have clear chunky rhythm tones alongside cutting trebly lead tones, while the inclusion of the middle pickup gave players access to the “spongy quack” distinctive of the Stratocaster’s “in between” positions.
The Old Standby is another model beloved by generations of harmonica players. Up until the 1990s, this model was a quality instrument made in Germany on a wood comb. Where the Marine Band was the choice of blues players, many country music players such as Charlie McCoy preferred the Old Standby. In the 1990s, Hohner began manufacturing this model in China on a plastic comb with a significant decrease in quality. Among harmonica fans the downgrade remains unpopular.[26]
Let’s learn the basic layout of Tabs. When you take a look at a Tab that you want to learn you will most likely see some standard notation on top and the Tab on the bottom. The six strings of the guitar are represented by the six horizontal lines of the Tab. The top line represents the high E string of the guitar and the bottom line represents the low E string of the guitar. This can seem a bit counterintuitive to some people so just remember that the top line is the thinnest string and you will be good to go.
As a trained engineer I just don’t see how contemporary luthiers would be able to control only these three parameters in combination in order to make up a specific tone. There is simply no connection between these and the sonic impact they have–again, in combination. Did anyone ever change the shape due to the wood he uses? For instance wood would be lighter by 5%, stiffer by 8% (which would be very much, by the way, but it happens all the time even with the same species) so consequentially make the horn less thick by 3% and trim the tail by 5 mm. A rule like that would be plausible in case wood would affect the tone that much. But luthiers never do. Thy do not even take care of weight and stiffness.

My Carvin SH575 is a semi-hollow body electric. The size is similar to the Gibson 336, but sounds totally different. When you play this guitar you can't put it down, Carvins are made with computer aid wood carving CNC machines the proto-type of the guitar is measured with lasers and programed into the computer so every guitar they make is to the 1000th to the original. The finish and the detail is awesome. It also is wired with hum bucking pick-ups, piezo acoustic pick-up and Roland GK synth guitar. You can get some beautiful hybrid tones from this thing and I never can stop finding new ones. Try one of these out if you ever go to California I think there is like 5 stores around the L. A. / San Diego area, you will see what I mean.

{ "thumbImageID": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "defaultDisplayName": "Epiphone Les Paul Special I P90 Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Worn Cherry", "sku": "sku:site51314371183322", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry-1314371183322.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Cherry/H77433000003000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn Black", "sku": "sku:site51314371183302", "price": "119.99", "regularPrice": "149.00", "msrpPrice": "252.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black-1314371183302.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-Black/H77433000001000", "brandName": "Epiphone", "onSale": "true", "stickerDisplayText": "On Sale", "stickerClass": "stickerOnSale", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Worn TV Yellow", "sku": "sku:site51314371183312", "price": "149.00", "regularPrice": "149.00", "msrpPrice": "209.00", "priceVisibility": "1", "skuUrl": "/Epiphone/Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow-1314371183312.gc", "skuImageId": "Les-Paul-Special-I-P90-Electric-Guitar-Worn-TV-Yellow/H77433000002000", "brandName": "Epiphone", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
As far as reliability goes, a guitar is actually quite simple to make reliable. Build, sound quality and playability are much more important than reliability per se, simply because if the guitar is at least half-decently made it usually turns out to be quite dependable. The biggest reliability issue would be a guitar that cannot stay in tune very long. This is something that often happens in regards to the build and material quality of acoustic guitars, but with electrics it’s something that can usually be corrected by swapping out the tuning machines to locking ones, or at least better-performing ones as well as setting the intonation and neck relief correctly.
The Les Paul Custom then became known as the “tuxedo” Les Paul with its Ebony and Alpine White color finishes, accentuated with shiny gold hardware. The Custom PRO features a classic gold LockTone Tune-O-Matic bridge and a gold stopbar tailpiece. You’ll find more gold in the headstock with the gold Grover tuners. It also features a fully bound body, headstock and neck, as well as pearloid fretboard inlays.
The 4000 series were the first Rickenbacker bass guitars, production beginning in 1957. The 4000 was followed by the very popular 4001 (in 1961), the 4002 (limited edition bass introduced in 1977), the 4008 (an eight-string model introduced in the mid-1970s), the 4003 (in 1979, replacing the 4001 entirely in 1986 and still in production in 2012), and most recently the 4004 series. There was also the 4005, a hollow-bodied bass guitar (discontinued in 1984); it did not resemble any of the other 4000 series basses, but rather the new style 360-370 guitars. The 4001S (introduced 1964) was basically a 4001 but with no binding and dot fingerboard inlays. It was exported to England as the RM1999. However, Paul McCartney received the very first 4001S (his unit was left-handed, and later modified to include a “zero fret“).
In mid-’29, John Dopyera left the National company to start the Dobro Manufacturing Company along with his brothers Rudy and Ed, and Vic Smith. National String Instrument Corp. continued operating under Beauchamp, Barth et al. In 1930, the Dobro company name was changed to the Dobro Corporation, Ltd., with additional capital provided by Louis and Robert Dopyera. Dobro was, during this period, a competitor of National’s, although in this somewhat incestuous world, both got their resonator cones, plate covers and other parts, like tailpieces, from Adolph Rickenbacker.
achieved by the creators. A lot of YouTube channels can be very amateurish and suffer from poor video quality, muffled audio and presenters who don’t work well with a camera. And it doesn’t matter if the lesson is coming from someone in the same room or from a studio on the other side of the world, the guitar teacher needs to be good. Someone who communicates clearly and makes you feel welcome.
Birmingham’s Table Scraps add a grunge-y Midlands mud to the garage rock sound established by the likes of 13th Floor Elevators and The Cramps. Guitarist Scott sticks to a “three-pedal limit”, using a Death By Audio Fuzz War (“a versatile monster”), Echo Dream 2 and Boss DD-3 to jarring effect to create freaky, DC59’d melodic lead bursts. As Scott says: “Once you try 12-string everything else only sounds half as good.”
Ideally, a steel string acoustic guitar or an electric guitar would be the best for you if you want to learn to play blues and classic rock. Classical guitar because of its nylon strings and its warm tone is best played by fingers. If you need help in what kind of guitar to buy, check out our article on different kinds of guitars available for beginners, this might help:
The Wire. You'll see a lot of vintage spec wordings bounced around here and that pretty much boils down to the aesthetics. Those early Fenders and Gibsons we all know were wired at the original factories with a cloth covered 'push back' wire, whereas as some modern factories, far east predominantly use standard plastic coated wire today. But the important detail is the 'AWG', or American Wire Gauge. Widely used in the guitar world for optimal results, is 22AWG wire. I would go into detail on this, but THIS site has some superb facts about AWG, which if you'd like to find out more I'd recommend a read of! So back to the cloth/plastic thing. Personally, the 'push back' cloth wire is much easier and tidier to work with and I fully hold my hands up to saying it looks much better too. I always use this for any guitar wiring, the results are always great and it's a pleasure to wire up with. I personally use 22AWG copper, solid core wire, great to work with and consistent. 
By placing two (or more) mics at different distances and angles from your speaker cab you will get two different sounds - and more variation will of course depend on whether these are the same model of mic, or different models. Mics placed further away will capture more room tone, and close mics are more upfront. Angled mics offer a less direct sound. Capture both feeds and blend or select from the two after recording.

We think this is one of the best multi-effects pedals as it’s packed to the brim with a range of classic and modern Boss effects. In fact, there’s eight simultaneous effects categories that can work in unison, and each of those categories has multiple effects types within. This means you have access to a vast array of Boss effects as well as COSM amps derived from the Boss GT-100.
Sometimes people forget that the greatest musician is not the one who can plays faster. I play guitar and I admire who plays fast, but i admire more the ones who can make beatiful music, even if it's simple. Frusciante is one of the few guys who can do so (beside Hendrix). And Frusciante could play all of Jimi's songs when he was 12 years old, and I guess he still can. So for those who compare them to Steve Vai, you should listen to music and not watch to the speed of their fingers.
Description: Natural Model. Guitar Type: Acoustic - Body: Mahogany - Top Wood: Spruce - Back: Mahogany - Sides: Mahogany - Neck Wood: Mahogany - Neck Attachment: Set - Neck Construction: 1 Piece - Fingerboard: Rosewood - Frets: 20 - Inlay: Dot - # of Strings: 6 - Scale Length: 26" (66cm) - Headstock: 3+3 - Bridge Construction: Rosewood - Bracing: X-Type - Soundhole: Round (Traditional) - Rosette: Pearloid - Hardware: Chrome, Diecast, Classical Tuners - String Instrument Finish: High Gloss Natural
The Effect: When it comes to effects pedals, those which offer more than one type of effect are usually seen as the best cost effective solution out there. Although many still prefer that standard, standalone configuration, multi-effects pedals have a lot to offer. Take Carl Martin Multi Effects Pedal as an example. This thing is packed to the brim with boutique level effects. Easy to use, a board such as this one can substitute a whole pedalboard depending on the variety of effects you use. One of the other great features of this design is the fact that multi-effect pedals come in both digital and analog form. They have transcended that artificial sounding performance that plagued effects processors some 10 years ago. Today, a multi-effects pedal is every bit as capable as its standalone counterparts. While this design is aimed at everyone, budget oriented users stand to gain the most from it.
I have a hunch its a cheapo guitar and probably not worth a neck reset. Can't tell if it has a bolt on neck. my other guitars all have more warped soundboards though. The saddle is sort of cradled in wood by the bridge, the angle could be better, but I'm surprised there is any angle considering the saddle only pops out like a millimeter. The bridge curves down towards the pins to provide the angle. It probably has been set up in the past by someone who wanted an acoustic guitar to play like an electric, then it got reversed it later by way of the truss rod.
Now, the body size isn’t the only thing to think about. There’s also whether or not there’s a cutaway, and how this is implemented. A cutaway makes it easier for you to access the higher frets, because you can place your hand right next to them. Naturally this will reduce some of the resonance because there’s less body beside the neck, but it’s a tradeoff that a great many guitarists are happy to make if they want to be able to play those higher frets well.

Fender California Coast Series acoustic guitars are already being used across multiple musical genres by top alternative, indie, punk and grunge artists/bands, such as: Culture Abuse, The Regrettes and Dear Boy, as well as singer-songwriter Aaron Lee Tasjan and guitarist Angela Petrilli – accompanying each on their musical journey toward exceptional artistry.

Fender-type switches are, obviously, found in Fender guitars but are easily available so could find their way into any guitar, most likely Strat-type guitars. Import-type switches are often found in other makes like Ibanez and on replacement pickguard assemblies. If you have a look at my HSH wiring page and scroll down you’ll see I have an import switch in my Godin SD.
This diagram shows 3 single coils wired in parallel, allowing seven tone choices. The typical 3 single coil guitar contains a 5 way rotary switch which allows you to get 5 sounds - each single coil; neck and middle in parallel and middle and bridge in parallel. This modification will give you 2 more sounds - all 3 pickups in parallel and Neck and Bridge in parallel.
The Effect: Metal has become the prevalent genre when it comes to music that involves guitars. Dialing in a proper distortion can make or break the sound of your guitar as well as your entire band. Coincidentally, it’s so easy to go overboard with distortion, all while being certain you are on the right track. The very first step is to get a dist box that is suitable for metal. Something like Electro­Harmonix Metal Muff carries just enough punch to get the job done, but not enough to drown your tone completely with gain. You’ll find this to be a reoccurring theme with a number of great metal dist boxes. At the end of the day, it all comes down to your prowess and skill. Every good metal guitarist know that it’s all about the unity of equipment and knowledge. With that said, these pedals will get you started.

ASSEMBLE Now you can put it all together! By this time you'll be so excited you'll forget about the electronics and start to string in up before you get the electronics in but it's ok, we'll get there. Start with bolting on the neck in the same fasion that you did when you test fitted everything. Then follow that with the tuners, bridge and pickups. Don't forget to run the wiring for the pickups when you put them in.
This funky looking piece is a vintage Japanese-built Bruno MaxiTone semi-hollow guitar with a sunburst finish and two single-coil pickups with a 3-way blade pickup switch. We love the old Japanese electric guitars of the '60s where they had great looking retro cosmetics, such as this one with pearloid pickguard as well as pearloid base plates underneath the pickups. The guitar is in good playing condition, the vibrato tailpiece has been anchored with a screw in lieu of the spring, and there is a chip in the plastic mounting piece of the neck pickup. The guitar plays great and has a cool vintage Garage Rock tone to it!

The components are adequate. The electronics are good, have good tolerances, but the off board components are cheap and flimsy. The hardware is quite good, especially the enclosure. The PCB is well designed and well labeled. The big problem is that the layout instructions are quite poor and mislabeled in a number of places. There is no bill of materials so the components can be quite difficult to distinguish even when they're labeled. Additionally, product only includes one color of wire and does not include digital instructions as indicated in the product description.

While the number of effects may not be as many compared to recent releases, others don't have the same deep control and sound quality that the GT-100 provides. Speaking of control, instead of merely choosing your preferred amp, this processor lets you custom build your virtual amp and cabinet, an interesting feature that allows for even more freedom in crafting your own tones. Another feature that users are fond of is the ability to assign effects into its many footswitches, making the unit behave much like a regular pedalboard. Other notable features include polyphonic tuning and USB recording.

2. Materials. The timbers used to make these guitars were sourced from every corner of South East Asia. These timbers were “old growth”; in plainer words, the timber was taken from established forests. The advantages of this type of wood are long term stability and strength. Further to this, many of these timbers were species that are now on the endangered list and are therefore illegal to log and/or export. Now, while we consider the cutting down of established “old growth” forest timber a crime, it would be an even bigger crime not to make the most of what is already there. Whilst the build quality of the modern Asian made guitar (i.e. China, Indonesia, Vietnam etc) is exceptional, most of the timbers used are “plantation” timbers or more overly “new growth” timbers. Though this forestation is certainly light years ahead ecologically, it tends to yield timber which is brittle and can be unstable, making many repairs, such as a broken headstock untenable.
Parts made for the Kay Vintage Reissues may not fit or lineup with the original and we do not guarantee that our part will fit your guitar. We do sell SELECTED parts and hard shell cases for the following: K161V Thin Twin, K775V Jazz II, K162V Pro Bass, K5970V Jazz Special Bass, K1700V Barney Kessel Pro, K6700V Barney Kessel Artist and K8700V Barney Kessel Jazz Special.
Mundt Music of Longview, LLC is your one stop guitar shop. Located at 2312 Judson Road, we have everything that you need whether you’re buying your first guitar or adding to your growing collection. Make sure to join us in store on October 10, 2016 at 6:30pm, for our “Taylor Road Show” event. Guests will enjoy an evening of guitar talk and demos with Taylor factory staff and guitar makers from El Cajon, CA. It’s an event that any guitar enthusiast won’t want to miss.
You've come to the right place.  We offer a wide range of vintage and used guitars and basses including a great selection of Fender instruments.   We're guitar players who recognize and appreciate how important Fender has been to the evolution of Rock and Roll.  Please browse our web site, give us a call or visit our Chicago show room.  We're constantly searching for Fender guitars, new gear is arriving daily and they often sells before we have a chance to list them on our web site.  
With this high availability I can immediately check back with the program if I am unsure whether I am getting it right when practicing. I can play along to the backing track while practicing and I can continue with new material if I feel that I am ready to do so. All of this is simply not possible with a local instructor on a 30 minute per week basis.

The Line 6 Spider IV is the most fully featured beginner amps out there, yet is surprisingly inexpensive, only edging out the Orange Crush PiX CR12L a little bit on cost. The Line 6 Spider IV 15 offers four amp models, six built in effects, a built in tuner, a headphone jack, and a CD/MP3 player input. Everything a beginner needs to practice in one compact package. These features aren’t completely necessary for beginners to have, but they do serve as a nice convenience and the Spider IV does not cost that much more in the process to add them. On top of that, the Spider IV still manages to be straight forward and easy to use, despite all the built in options.
Washburn started in Chicago in 1883. They manufactured guitars and various other string instruments. Now they’re a division of the US Music Corp and owned by JAM Industries USA, but they continue to produce quality guitars. In the beginning, they mostly focused on banjos and mandolins. Starting in the 80s, they branched off into producing signature guitars. Now days they make a wide variety of instruments and are very beginner friendly. Washburns are made from fine-quality wood. This means they can get pricey. But the quality the solid wood offers is well worth the price increases. They’re a decent american company that make very consistent instruments. 
Some amps have a bright cap on the volume pot. The purpose of this cap is to allow your amp to provide a bright, clear tone at lower settings on the volume pot. The more the pot is increased, the less effect the cap has. When the pot is turned all the way up, it should be completely out of the circuit. Like they do with a bright switch, drive pedals can interact with a bright cap and result in less-than-pleasant drive tones. If your amp has a bright cap and you don’t like the way it responds to some pedals, or you find it excessively edgy at low volumes, consider having a competent amp tech change the bright-cap value or remove it altogether. This can be a worthwhile and easily reversible mod.
Several neck shapes appear on guitars, including shapes known as C necks, U necks, and V necks. These refer to the cross-sectional shape of the neck (especially near the nut). Several sizes of fret wire are available, with traditional players often preferring thin frets, and metal shredders liking thick frets. Thin frets are considered better for playing chords, while thick frets allow lead guitarists to bend notes with less effort.