The guitar is built of full, all-solid maple that gives a nice clean tone and helps to avert some of the feedback prone to other fully hollow guitars. There’s a mahogany set neck to both help with longer sustain and to give you the premium fit and finish usually reserved for more expensive hollow-body instruments. The two ACH-ST humbuckers aren’t ultra-heavy metal pickups, so you won’t get a ton of snarling distortion out of the AF55, but you can push an overdrive sound to the next level if you want to. It all adds up to a sound that’s perfect for a player who’s looking to go for the jazz/blues vibe, or someone who’s looking to go for a singer/songwriter roots project. The trapezoid tailpiece also gives you a nice nod to vintage axes, too.

We’ll talk more about the sound quality shortly. To give you a gentle introduction, Line 6 has been in the amp and effects modeling game for a long time. Their POD line of guitar effects processors has been around for a while, and you might be familiar with their Pocket POD. Some of you might also know them for their extremely popular digital delay pedal and looper, the DL4 (an absolute mainstay on pedalboards everywhere). Line 6 makes several multi-effects units, and according to the research we did the POD HD500X (from their POD HD X series) is the one mentioned and recommended most often. They make a rack-mountable version of it, but we’re more interested in the floor pedal unit. This is a multi-effects pedal, amp simulator, incorporates an expression pedal, tuner and looper, and doubles as a USB audio interface, just to name the basics.
Pete Townshend turned his guitar into a machine gun. That was the actual sound he went after, slamming his guitars into speaker cabinets and toggling the pickup-selector switch violently. “To me the guitar was a symbol,” explained the Who’s lead guitarist. “It was a metaphor for a machine gun. And the only thing you could do with a machine gun in the 60s was break it across your legs. That’s what I did.” You can hear these specific sonic strategies on songs like My Generation and Anyway, Anyhow, Anywhere.
Ibanez are a Japanese guitar brand founded in Nagoya, Japan in 1957. They began by building copies of Fender and Gibson models, but – a couple of lawsuits later – they started creating their own models, which are now icons in their own right. Their line currently includes their famous Roadstar (RG), the thin-bodied S series, and several artist signature models, including guitars for Steve Vai, Joe Satriani, and Mick Thomson.

And on that (low) note, I’ll wrap up. While many bass parts nowadays are probably laid down with samples and synths, by keyboard players and guitarists, what you’ll get from a real bassist is more than just his sound, it’s the magic in his fingers, and his bass-players’ sense of just what to play to perfectly complement the song—it’s certainly worth a little extra effect to take advantage of what the true masters of the low-end have to offer.

SHEILDING Sheilding is good to use if you want to minimize that annoying buzz you can get from surrounding interference that electronic components such as amps can produce. You can use sheilding paint that is a bit more expensive but easier to apply than copper tape. All you do is paint it on and let it dry. It also gets into the areas tape can't reach. To install the tape you basically just apply it to the inside of the control cavity and solder up any seams that might let the interference through. The soldering can be a little tricky since you have to lay down a long bead of it along the seam. Kind of like welding. Here are some futher instructions After this is done you can install the pots and switch. Be careful when tightening them down not to scratch the finish. Add the knobs and get out your schematic for wiring it up.

{"product":{"id":"J40301","stock":"","price":"149.00","name":"Les Paul Special Vintage Edition Electric Guitar","download":false,"sku_id":"","checksum":"93895071200","rep_id":"site51500000000013137","displayId":"1500000000013137","sku_rep_id":"","gc_pro":false},"category":"Electric Guitars","pageName":"product_detail","subcategory":"Solid Body Electric Guitars","dept":"Guitars"}

Gibson Les Paul Studio Electric Guitar The Gibson Les Paul Studio electric guitar has been around since 1983. For 2018 Gibson upgraded one of its most well-loved models, fitting it with cryogenically treated frets for greater fret durability, adding fingerboard binding and giving it a Slim Taper neck profile. The core Les Paul tones and quality hardware and electronics are still there, of course.
The three Teisco amps included the Teisco-88, the AMP-71R and the Miny. No details are available on these, but they were fairly rectangular cabinets with top-mounted controls. The Teisco-88 had “Teisco” and a big “88” on the grillcloth. The ’66 model was a tube amp, so this likely was, as well. I suspect the others shown were tubers as well. The Miny had the italicized T logo on the front. The AMP-71R had reverb.

Terry Kath and Stevie Ray Vaughan for me over anyone on that list but Jimi. I’ve seen Page, Clapton, Billy Gibbons, Brian May, David Gilmour, Steve Howe, Eddie Van Halen, Buddy Guy, Keith Richards, Pete Townshend, Mick Ronson, Kerry Livgren, Joe Walsh, Don Felder and Carlos Santana among others. Totally subjective as is all art and I have weird taste.

Some delay pedals also come with full looping abilities, allowing you to play detailed multi-part melodies completely by yourself. A few artists to look to for great examples of delay pedal use are Angels and Airwaves, U2 and Muse. Reverb pedals are an entirely different animal. It brings its own unique type of sustain to a note, infusing the sound with strong texture and character through its distinctive echo. Creating a sound not quite like any other effect, reverb calls to mind the energetic surfer rock of the 1960s, such as Dick Dale's version of "Misirlou." You can stay true to those vintage roots or take the effect in a new, modern direction—it's up to you. With the added dimension they bring to your tone, you'll want to use your delay and reverb effects pedals at every performance. They make a unique contribution to the sound individually and even more so when you use them as a team.
It’s hard to look beyond the original and classic Gibson J-45 when it comes to recommending this particular shape. Players love the J-45 on account of its sweet, warm tone with beautiful singing high notes and defined mid range. Upon release it quickly acquired the moniker ‘the workhorse’ on account of its durability and guarantee of quality. Nothing that’s happened since has diminished that.

Eddie Kramer has a slightly different approach, working from a familiar setup of favourite close and ambient mics (including the Beyerdynamic M160 ribbon mic) and then mixing them together to taste. "I use a three-mic technique: an SM57, an MD421 and an M160, all in a very tight pattern. Then I can pick and choose the tone quality, because each mic is totally different. I combine these together, and then I put a U67 away from the amp to get the ambience."
The 50-watt version is driven by seven 12AX7 preamp tubes with two 6L6s powering the amp, which is surprisingly huge in output – capable of filling an auditorium no problem (depending on your cab, of course). Other features that make this such a popular choice among gigging guitarists include three customizable channels and a four-button footswitch.

Bobby Jo is number one on this list. Every artist has unknowingly been influenced by him. Starting in the Mississippi Delta, Johnson’s life is rife with myths, and allegory. His deal with the devil and death are full of folklore and mysticism, and it only adds to his haunting voice and groundbreaking guitar playing. His songs are just a pure expression of emotion with no bars held. He led the groundwork for early blues to be filled in and worked upon by all the artists on this list. He also worked on breaking down social barriers. A black man in the early 20th century was not exactly the best place to be. But his music was to add interest by white musicians and help the civil movements of the sixties. Politically or musically, Robert Johnson is deserving of number one on this list.
PRS McCarty 594 Electric Guitar The PRS McCarty 594 is a vintage-inspired electric guitar with plenty of premium appointments such as a . It’s part of the Core Electric Series, the company’s lineup of high-end guitars. This means that the McCarty 594 has all the bells and whistles you can expect from a premium instrument. For pro musicians, this is an investment worth every penny.
Samick is a South Korean based musical instrument manufacturer, which was founded in 1958 by Hyo Ick Lee, with the goal of "enriching human life through music, the universal language". By the mid-1990s, they were the single largest guitar manufacturer in the world! Because they build under contract for many famous brand names, more likely than not, you've already played one of their guitars.
Others are perfect for getting started. In fact, the Epiphone Les Paul Special II is the electric guitar I most often recommend for beginners. This is an instrument that’s modeled on the legendary Gibson Les Paul, with many of the same attributes such as a single-cutaway body, dual humbuckers and tune-o-matic bridge. It is a simple yet versatile setup.
Fender Kingman "C" Custom Shop Acoustic/electric in Fiesta Red, 1 of 150 worldwide. This was a limited production that came out of the custom shop in Hartford, CT. Has a Fishman pickup. Not a nick, ding or blemish will you find on this guitar, almost museum quality. Comes with original Fender case(perfect shape), Certificate of authenticity and other paperwork and allen wrench. Ships to the US only.

There are two main types of electric guitar bridges. There is the "Tune-O-Matic"/"Roller" type, which is found on Gibson, Gretsch and Epiphone guitars. This is usually a removable long oval part sitting on adjustable posts. These posts determine the height of the strings. Another is the "Vibrato"/"Hardtail" type, which is common to Fender and Paul Reed Smith guitars. In this case, bridge and tailpiece are one; there is usually a large, rectangular plate bolted directly onto the guitar with a raised heel which holds the strings and individual string saddles acting as the bridge. These saddles determine the height of the string and can be adjusted individually to create either a flat or arched effect, depending on the type of neck your electric guitar has. According to Chicago Luthiers, "Some just have adjusters that raise and lower the whole bridge, but not the individual strings, and some have both. This applies to guitars with tremolo bars as well as those without."

Electric guitars have come a long way since then, and today you’ll see many different designs. But you can still find big hollow-body jazz boxes that hearken back to those early days in the lineups of many manufacturers. They’re best suited for jazz players looking for a warm, woody sound. Of course the technology has improved greatly in the past eighty years, but these instruments still have a nice vintage vibe. You’ll sometimes see these instruments referred to as semi-acoustic.
Since National had applied for a patent on the single cone (US patent #1,808,756), Dopyera had to develop an alternative design. He did this by inverting the cone so that, rather than having the strings rest on the apex of the cone as the National method did, they rested on a cast aluminum spider that had eight legs sitting on the perimeter of the downward-pointing cone (US patent #1,896,484).
The company was within three months of going out of business before it was bought by Henry E. Juszkiewicz, David H. Berryman, and Gary A. Zebrowski in January 1986.[18] Gibson's wholesale shipments in 1993 were an estimated $70 million, up from $50 million in 1992. When Juszkiewicz and Berryman took over in 1986, sales were below $10 million.[19] New production plants were opened in Memphis, Tennessee, as well as Bozeman, Montana. The Memphis facility is used for semi-hollow and custom shop instruments, while the Bozeman facility is dedicated to acoustic instruments.[20]

Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
This is because sound in an acoustic is dependent upon the bridge, saddle, and soundboard’s (top) ability to transfer string vibration through the sound hole of the body. The top (soundboard), back, and sides makes the body of the guitar where the sound hole is designed and cut. Knowing this, you’ll not only need wood that’s strong, but wood that can offer unique acoustic properties that emphasize its ability to project differing sounds at various frequencies. Of course, your choice of strings also lends to the harmonic ranges of a guitar.
{ "thumbImageID": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-3-Color-Sunburst/J46162000001000", "defaultDisplayName": "Fender American Professional Jazz Bass Rosewood Fingerboard Electric Bass", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000030584", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-3-Color-Sunburst-1500000030584.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-3-Color-Sunburst/J46162000001000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Olympic White", "sku": "sku:site51500000030587", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Olympic-White-1500000030587.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Olympic-White/J46162000002000", "brandName": "Fender", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Sonic Gray", "sku": "sku:site51500000030585", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Sonic-Gray-1500000030585.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Sonic-Gray/J46162000004000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Black", "sku": "sku:site51500000030586", "price": "1,549.99", "regularPrice": "1,549.99", "msrpPrice": "1,550.01", "priceVisibility": "1", "skuUrl": "/Fender/American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Black-1500000030586.gc", "skuImageId": "American-Professional-Jazz-Bass-Rosewood-Fingerboard-Electric-Bass-Black/J46162000003000", "brandName": "Fender", "stickerDisplayText": "Top Rated", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

WOW! This thing is incredible. One of the nicest instruments we have ever played and we've had, played and sold a few hundred over the past 20 years! Can't say enough about this bass. It's a pre-owned Zon Legacy Elite series 5-string model featuring a beautiful book-matched solid Bubinga wood top over a solid Mahogany wood body. A solid graphite neck / fingerboard utilizing a sculpted body neck joint finishes off the basic construction of the instrument. Huge tone is delivered via 2 active Bartolini pickups that feature controls for volume, bass, midrange, treble and balance. This bass has had the electronics modified by Zon to move the midrange control from the access hole in the back cover to a matching pot located in the control section on the front of the bass. While at Zon to get the custom electronics installed,  the original owner had new frets and a new finish coat added. Figured as long as it was there "what the heck". Tuning is accomplished via the 5 German made Schaller tuning machines in the same gold plate finish as the solid cast bridge. The solid graphite neck features a full 2 octave neck with 24 frets and a 34" long scale. This bass is a dream to play! Just about as good as it gets. There's not a mark on it anywhere. It looks brand new! Rock solid and stays in tune. Set up perfectly! Includes original Zon Soft exterior hard shell case on black Cordura.

ESP is another huge brand in the realm of electric guitar, with huge bands like Metallica, The Rolling Stones, Deftones, Lamb of God, and Slayer endorsements in full swing. Any fan of this kind of acts will be very interested in starting with an ESP of their own. Like Fender and Gibson, ESP has a more affordable range known as LTD. This kit includes an electric blue H-51 guitar with 24 frets and dual humbuckers, as well as a 12 pick sampler set, gig bag, guitar stand, strap, 10-foot instrument cable, and a tuner.
As with many of our services, we do more than just pull and replace your frets when doing a refret. Full refrets include a resurfacing of the fingerboard to proper level (even more precisely done than many factories), repair to any damaged fret slots, nut removal and reuse (when applicable), and full Calibration and Reset service (which includes a full traditional set up). Strat style tremolos add $10 to the price, Floyd Rose style bridges add $30.
While we have touched on the characteristics of single coil and humbucking pickups, to truly cover guitar electronics check out -‘Guitar Electronics for Musicians’ by Donald Brosnac which details the history of guitar pickups and goes into great detail about the mechanics of guitar pickups). It’s fairly heavy going for anyone new to the topic but also very interesting at the same time.
The first thing to do is to cut out a piece of copper foil slightly larger than the bottom of the electronics cavity.This way the edges of the foil will go up the sides of the electronics cavity a bit. Next cut out strips of copper foil slightly wider than the depth of the cavity, and form them along the sides. When you are finished, it should look like the photo on the left.
An excerpt: “The Dobro brand name has been identified with resonator guitars since 1929 and is currently owned by Gibson Guitar Corporation. Despite its registered trademark status, the Dobro name has at times been used generically to refer to woodbodied instruments with 1) an aluminum cone or “resonator” mounted so that the cone opens toward the top of the instrument and 2) an 8-armed spider assembly supporting the bridge.”
7) Yamaha quality can't be beat. I just returned from my friend's house and noticed his $1,000 Martin box splitting because of the dry Las Vegas climate. And, no I'm not a believer in guitar humidifiers because I believe a guitar should be made for the real world and not so delicate that it needs a humidifier. My friend and fellow old-time musician who has been working at Guitar Center here in Vegas for many years has seen them all come back over time because of splitting or warping except one brand that is... You guessed it, Yamaha! The reason you find them back ordered from time to time is because Yamaha actually gives their wood time to cure properly unlike other manufacturers who tend to rush their products out the door. And, this guitar is for my kid and for travel which means it needs to be exceptionally tough and well-made:)

If you’re reading this guide, you probably need help purchasing a first acoustic guitar or electric guitar for yourself, a friend or a child. We're here to help you understand the key specifications and features to look out for. We'll explain the differences between acoustic, acoustic-electric and electric guitars. We'll also recommended six of our best beginner guitars and two beginner guitar value packs. 
Guitar distortion is obtained and shaped at various points in the signal processing chain, including multiple stages of preamp distortion, power valve distortion, output and power transformer distortion, and guitar speaker distortion. Much of the distortion character or voicing is controlled by the frequency response before and after each distortion stage. This dependency of distortion voicing on frequency response can be heard in the effect that a wah pedal has on the subsequent distortion stage, or by using tone controls built into the guitar, the preamp or an EQ pedal to favor the bass or treble components of the guitar pickup signal prior to the first distortion stage. Some guitarists place an equalizer pedal after the distortion effect, to emphasize or de-emphasize different frequencies in the distorted signal.
You have a huge range of effects at your disposal, which can be applied to both vocals (thanks to the XLR inputs) and line level instruments such as your acoustic guitar. You have 2 compressors, a boost, 3 Chorus types, as well as 3 types of delay and reverb effects to suit a wide range of sonic palettes, all of which have been optimised specifically for acoustic guitar. However, it’s the Acoustic Resonance selectors, 80 second phrase looper and anti-feedback feature that the acoustic guitarists will really take advantage of.
Fuzz pedals provide guitarists, bass players and even keyboard players with a hefty amount of distortion that sounds VERY different to regular distortion sounds. Fuzz pedals make your guitar sound like its pushing your amplifier to the point of blowing up. A fuzz pedal completely changes the sound of your guitar signal into a heavy, fizzy, and extremely noisy sound that, depending on which pedal you choose, can provide a bass heavy noise, to a spitting ‘broken’ amp sound. Think Velcro being ripped apart and you’re somewhere pretty close.
Acoustic guitars vary by type. Some are designed for beginners, while others are customized for professional guitar players. Most of the major acoustic guitar brands are available in a variety of different styles, each designed to best suit a customers' specific playing needs. Ease and sound are certainly big factors to consider when choosing a new acoustic guitar.
When starting with the electric guitar, it’s not uncommon to look at experienced player’s pedal board and think “Wow, so many pedals, with different names – wonder what should I get”. And while everyone knows that the core of your sound comes from the sensibility of your touch, your guitar and your amplifier, it is also true that certain pedals can transform and shape your tone to make it more unique and personal. Before shelling out all your beloved savings on unnecessary pedals, take a look at this guide to understand the 10 basic pedals, the so-called “must-haves”. 

Non Locking Tremolo FAT/SAT TREMOLO TREMOLOARM-INSTALLATION Der Tremoloarm kann leicht eingesetzt und entfernt werden. Setzen Sie den Arm in die Armöffnung an der Tremolo-Basisplatte. Ziehen Sie den Arm zum Entfernen hoch. TREMOLOARM-EINSTELLUNG (SAT PRO) Zum Einstellen der Höhe des Arms entfernen Sie die Tremolo-Federabdeckung von der Rückseite der Gitarre und verwenden einen 3 mm großen Inbusschlüssel zum drehen der Höheneinstellschraube an der Unterseite des Tremoloblocks. respects the intellectual rights and property of the owners, luthiers and salespeople at the Rickenbacker, Gretsch, Gibson and Fender Guitar Corporations. Registered trademarks/designs of these corporations include, but are not limited to, 325, 330, 360, Jetglo, Stratocaster, Flying V. is not affiliated with these corporations in any way. The guitars above represent instruments built in Japan for the Japanese domestic market only. They are no longer being made or distributed, which makes them rare. This page was created for collectors and enthusiasts; for the sole purpose of providing information, photo documentation and research tools.

I could not afford an American or European guitar when I was 12, but Sam Ash sported a Japanese stratoslabber, with 1, 2, 3, or 4 pickups. Each extra pick up was another eight dollars! I bought the 2 pick up model for $24 and brought it home. What a square slab. The wood had the aspects of cardboard, it was probably what is called basswood. The pickups were single coil, chrome covered, and no better than a deArmond harp mike. My brother returned it, and bought a better looking tele style Japanese guitar I believe by Kent, with tin foil inserts in the pick ups. It went from Kandy apple red, to natural, to white, and finally to trunk-splatter grey with Seymour Duncan pickups and Grover tuners. I finally sold it in 2009.
A six-string guitar has five musical-intervals between its consecutive strings. In standard tuning, the intervals are four perfect-fourths and one major-third, the comparatively irregular interval for the (G,B) pair. Consequently, standard tuning requires four chord-shapes for the major chords. There are separate chord-forms for chords having their root note on the third, fourth, fifth, and sixth strings.[41] Of course, a beginner learns guitar by learning notes and chords,[42] and irregularities make learning the guitar difficult[43]—even more difficult than learning the formation of plural nouns in German, according to Gary Marcus.[44] Nonetheless, most beginners use standard tuning.[45]
Every single pickup on this Godin XTSA is awesome in its own right, but the best part of it all is dialing ina combination of the two. By virtue of its quality, it gives plenty of power, possessing a wonderful sounding high end cutting through, which makes it possible for you to hear it over the keyboard and the bass. With this electric guitar, you can get a beautiful acoustic sound and a really fat and great sound as well.
Most bass amps have only one rated wattage. A small number of amps, such as the Mesa/Boogie Strategy 88 amp head, have switchable wattage. A selector switch on the 88 enables the bassist to choose its full 465 watt power; half power (250 watts); or low power (125 watts). A bassist playing an arena on one night, then a club gig, and then recording in a studio could use full, half and low power for the different volume requirements. The Quilter 800 Bass Block has a "master control" knob which switches between various watt outputs for a similar approach.
Some of Jackson’s most famous models – such as the Soloist, the Kelly and the Rhoads – are a common sight on the biggest stages around the world as the biggest names in metal use them, including Randy Rhoads, Adrian Smith, Marty Friedman and David Ellefson. Thankfully it’s not just premium guitars on offer, meaning guitarists on a budget can easily pick up a quality Jackson (the Dinky Series in particular) for just a few hundred bucks.
Why does the material matter less than with an acoustic guitar? Because the body of an electric guitar is much less important in producing and amplifying the sound; all it really has to do is hold the strings so they're long and tight enough to make the kind of sound frequencies we want to hear. Although resonance still plays an important part in giving an electric guitar its tone, solid-body electric guitars generate most of their sound through an entirely different process from acoustic guitars. In fact, even though acoustic and electric guitars look similar, and you play them in a broadly similar way, they are quite different instruments.
The question is, does koa do anything for the sound, or is it just for the esthetics? The material in instruments always affects the tone, and koa makes the tone brighter while still being deep and satisfying. Sound is always hard to describe in words, because we experience sound differently, but if you’re curious about what it sounds like, just check it out on YouTube.
I’m not sure if you’re right about Joe being wrong. My memory of exactly how tone controls are usually wired is kind of failing me, but I think I remember that what you’re saying would be true if the output was taken from the node connected to the capacitor, but it’s not–the output node is the node on the opposite end of the tone pot from the capacitor, unless I’m remembering wrong. I think that filter-characteristics of guitar tone circuits are easier to visualize if you imagine them as reacting to a current source. Meaning “a big resistor in series with a capacitor” reacts the same way that “a big resistor” does. Basically, current above the cutoff frequency is shunted to ground through the tone pot–so if the tone pot is high, very little percentage (compared to if it was just a capacitor) of this current gets shunted, whereas if the tone pot is low, a high percentage gets shunted.
Continuing the example of making comparisons of specifications, there are Guilds in this price range that come with all solid woods, a rosewood fretboard, and with built-in tuners. Also, Epiphone Masterbuilt has solid wood acoustics, even some with cedar tops which are highly sought after by finger style players, plus they have a rosewood fretboard, a built-in tuner, two pickups and deluxe tuning machines. Moreover, both of the above guitars sell for less than the Taylor 200 series model you listed. So which is better?
Silvertone starter pack is incredibly hard to beat. The candy blue finish gives the guitar a gorgeous aesthetic that looks fully professional. The pickup selector has 5 positions, and there are two tone knobs to give even more control over the sound. Stratocaster fans will love this guitar! Also included in the set is a gig bag, small Silvertone amp, strap, 5 picks, Allan wrenches, strings, a clip-on tuner, and a tremolo bar.
The value of the guitar will also be an important factor that will contribute to the overall score – because spending $200 on a model that sounds like a $2000 guitar is always something that can’t be ignored! We rate the best acoustic guitars and the best bass guitar list in the same way. With every new model we add and review, we update the top 10 rankings.
Because driving the power valves this hard also means maximum volume, which can be difficult to manage in a small recording or rehearsal space, many solutions have emerged that in some way divert some of this power valve output from the speakers, and allow the player to generate power valve distortion without excessive volume. These include built-in or separate power attenuators and power-supply-based power attenuation, such as a VVR, or Variable Voltage Regulator to drop the voltage on the valves' plates, to increase distortion whilst lowering volume. Guitarists such as Eddie Van Halen have been known to use variacs before VVR technology was invented.[specify] Lower-power valve amps (such as a quarter-watt or less)[citation needed], speaker isolation cabinets, and low-efficiency guitar speakers are also used to tame the volume.

SOLD OUT: Here we had a beautiful vintage 1972 Harmony Monterey Mandolin it's an A style and is totally near mint! Beautiful classic Teaburst sunburst on a AA figured solid spruce TOP its in top condition and has really great vintage patina look to it. It's burst color is perfect match to a 60s Gibson it's very Cool US vintage It's Top is nicely figured and has lots of 3-D Birdseye figured back sides & neck all it's bindings are clean with patina and it plays perfectly and has excellent volume and a nice woodsy tone everything is like new includes a hard shell case it's just $449.00 this is a real bargain for US vintage piece of history and is in such all round fantastic shape. It Plays as beautifully as she looks! ,,, Let me know if you may have an interest in it it's super nice..
Bending: Bending is a pretty common element of Tab. You can tell that you are supposed to bend a note by an upward pointing arrow next to one or more numbers. The distance you are to bend the note will be defined by an indicator next to the arrow. It might be a “full” bend or a “1/2” bend. Once you are exposed to a couple of bends you will quickly catch on to the basic idea.

There are over 200 choices of electric guitar strings, combining Ernie Ball's diverse selection of materials, string gauges, and styles. Ernie Ball electric guitar strings come in a variety of different high quality materials including M-steel, cobalt, nickel, stainless steel, titanium, and bronze. Our guitar string sets are available for 6-string, 7-string, 8-string, 9-string, 10-string, and 12-string guitars.
{"pageName":"[gc] pdp: washburn xmdlx solid body electric guitar","reportSuiteIds":"guitarcenterprod","prop2":"[gc] shop: guitars: electric guitars","prop1":"[gc] shop: guitars","events":"event3,prodView","evar51":"default: united states","prop5":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop6":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","prop3":"[gc] shop: guitars: electric guitars: solid body electric guitars","prop4":"[gc] shop: amplifiers and effects: effects: effects pedals: delay and reverb effects pedals","products":";114096449;;;;evar65=null-Guitars-Washburn","linkInternalFilters":"javascript:,","channel":"[gc] shop","prop7":"[gc] product detail page"}
Electric guitar strings are thinner than acoustic guitar strings and closer to the neck and therefore less force is needed to press them down. The ease with which you can bend strings, clear access to the twelfth position, the use of a whammy bar and the manipulation of pots and switches whilst playing has led to the development of a lead guitar style that is unique to the instrument. Fret-tapping is a guitar technique for creating chords and melody lines that are not possible using the standard technique of left-hand fretting and right-hand strumming. The sustain, sensitive pick-ups, low action and thin strings of the electric guitar make it an ideal instrument for fret-tapping.
Return authorization must be approved. Returns accepted based on R and B approval of unique circumstances that have been reviewed and agreed between R and B and buyer. Buyer must contact R and B Vintage Guitars with-in 7 days. Buyer is responsible for shipping charges back to R and B. Return payments will be made after successful undamaged return of the item.
Solder is basically a low melting alloy, which in a nutshell means it’s melting point is far lower than the typical materials it will be used to join. It’s melting range is generally between 200 to 800 °F. Solder is available in either lead-based and lead-free. Most commonly you will use a 60/40 (60% tin, 40% lead) rosin core solder when working on guitar wiring.
No, could it be!? Finally we see a brand that does not come from England nor the US, but from Germany. ENGL specializes in tube amps for high-gain and heavy-metal. Its most famous users are Ritchie Blackmore and Steve Morse (Deep Purple), Alexi Laiho (Children of Bodom) and Chris Broderick (Megadeth). Both past and present Deep Purple members even have their own signature model. And there's also the standard Powerball, Fireball, Classic, and Invader series.
Orange make great amplifier cabinets that work with a wide variety of heads. In fact, there are many artists out there who like to mix and match their amp+head combinations to get the specific sound out of their head combined with the classic sound of an Orange speaker cab. The Orange PPC212 Guitar Speaker Cabinet - 2x12 has been designed to bring the best out in your Orange amp head by utilising 13 ply, high density 18mm Baltic Birch plywood in a closed back construction partnered with 2 x celestion vintage 30 speakers. This Power Projection Cabinet (PPC) has been designed to last the test of time thanks to the rugged construction.

In the Guitar amplifier world, ANY of the “boutique” brands (some are truly boutique, offering one-of-a-kind amps, but many are just small-scale shops that have a couple lines to choose from and a couple of customizable features) fit this classification of “top shelf,” because they offer the highest quality components, are assembled with the greatest of care (usually by hand with almost no automation), and generally offer tweaks and improvements on older designs. In effect, these amps are “custom built or even bespoke.
{ "thumbImageID": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst/L21567000001000", "defaultDisplayName": "Fender Player Stratocaster Maple Fingerboard Left-Handed Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "3-Color Sunburst", "sku": "sku:site51500000219695", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst-1500000219695.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-3-Color-Sunburst/L21567000001000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } , { "name": "Tidepool", "sku": "sku:site51500000219696", "price": "649.99", "regularPrice": "649.99", "msrpPrice": "650.01", "priceVisibility": "1", "skuUrl": "/Fender/Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-Tidepool-1500000219696.gc", "skuImageId": "Player-Stratocaster-Maple-Fingerboard-Left-Handed-Electric-Guitar-Tidepool/L21567000002000", "brandName": "Fender", "stickerDisplayText": "", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }
The Effect:These pedals keep the original clarity of your sound intact, depending on how you tune it, you can use a little bit of overdrive, that adds some grit to the signal, with higher tuning you can get relatively more aggressive overdrive sound that’s still tame and if you push your overdrive pedal to the limits you might get a similar sound to that of a distortion pedal’s lower settings. A good overdrive (like the Ibanez TS9 Tube Screamer) is an essential solution for those of you wanting sound enhancement with lower interference, while having the option to add some aggression in your sound, but without taking it to extreme degrees.
I string up the guitar and tune it to standard pitch. Put the guitar in playing position and capo the first fret. I hold the 6th string down at the last fret as that is where the neck joins the body. Then I turn truss rod right (clockwise) until there is no relief hardly if any bounce at the 7th and 9th frets using the 6th string as straight edge, don't go too far just maybe a slight tiny bounce because you don't want to backbow the neck. Then I simply turn the truss rod left counterclockwise 1/4 of a turn for relief and that's it. Take capo off and set action at 12th fret with 6th string 5/64 and 1st string 3/64.
This bass guitar amplifier features a 20-watt amplifier and an 8-inch driver. It reproduces frequencies from 70 Hz ~ 10 KHz with a total harmonic distortion of 0.5% (typical). It also has a built-in, switchable active compressor. It features a 3-band EQ, with the bass EQ centered at 100 Hz, mid-range EQ at 800 Hz, and a treble EQ at 6 KHz. It features a 3.5mm line output with an impedance of 1 kilohm, for directing the output signal to a mixer, recorder, or another amp. The 3.5mm stereo headphone output will defeat the internal speaker for quiet practicing.
On 2007’s self-titled effort and the new Nightmare, Avenged Sevenfold have continued to expand their sonic template, leaving Vengeance and Gates plenty of space to explore a range of different styles. At the end of the day, however, metal is metal, and at its essence that means killer riffs and shredding solos, which the duo unleash in abundance. A7X staples like “Bat Country,” “Almost Easy” and the latest single, “Nightmare,” are chock full of blistering rhythms and finger-twisting, speed-of-light leads, while they tread that sweet spot between catchy melodicism and all-out aggression.
The golden question is: What is the difference between acoustic and electric guitars. The primary difference between the two types of guitars is that acoustic guitars produces sound entirely through vibration. Its sound is emitted through the vibration of the string when it’s plucked back and forth. Electric guitars, on the other hand, are powered through electricity and electromagnetism generated through its components are what drives the sounds that come out of it.

{"eVar4":"shop: guitars","pageName":"[mf] shop: guitars","reportSuiteIds":"musiciansfriendprod","eVar3":"shop","prop18":"skucondition|0||historicalgrossprofit|1||hasimage|1||creationdate|1","prop2":"[mf] shop: guitars","prop1":"[mf] shop: guitars","prop17":"sort by","evar51":"default: united states","prop10":"category","prop11":"guitars","prop5":"[mf] shop: guitars","prop6":"[mf] shop: guitars","prop3":"[mf] shop: guitars","prop4":"[mf] shop: guitars","campaign":"directsourcecode2","channel":"[mf] shop","linkInternalFilters":"javascript:,","prop7":"[mf] category"}

“Volume pedals work well just before any delay or echo effects, as you can fade in and out of delays smoothly. A volume pedal at the very end of the chain just before the amp input will control master volume, and can also be used as a mute. Reducing the signal at this point will also reduce any noise. I put clean boosts right at the end—also just before the amp input—to ensure that any effects earlier in the chain would not be overloaded.”
Štěpán Rak and Kazuhito Yamashita have also generalized the use of the upstroke of the four fingers and the downstroke of the thumb (the same technique as in the rasgueado of the Flamenco: as explained above the string is hit not only with the inner, fleshy side of the fingertip but also with the outer, fingernail side) both as a free stroke and as a rest stroke.[41]
Unten ist die Standard-Lage des Stegs für AF-, AFS- und AG-Gitarren. Stellen Sie die Lage ein, um richtige Intonation zu erhalten. AF, AFS, AK TONABNEHMER (PICKUPS) Der Ausgangspegel des Instruments ebenso wie die Signalqualität kann durch die Tonabnehmer-Höhe beeinflusst werden. Die Höhe sollte so eingestellt werden, bis die Lautstärke von Hals- und Steg-Pickup bei voll aufgedrehtem Lautstärkeregler gleich...
Choose from electric guitars with hardwood, polyester, or leather bodies, and carbon, maple, or rosewood fretboards. We offer right-handed and left-handed configurations, along with electric guitars that feature options like Tune-O-Matic, tremolo, and adjustable bridges. If you're brand-new to playing, you can even find a student kit including lesson books and helpful accessories to keep you on beat and in tune as you teach yourself to strum.
Forget Risky Business (remember the famous scene of Tom Cruise rockin' out in his boxers?); this technique, which I consider real air guitar, is serious business. It entails capturing the airy, percussive sound of the plectrum strumming or picking the electric guitar's strings-either in acoustic isolation or combined with the ambient sound from the amp-and then mixing this sound with the recorded amplifier sound. The addition of just a little percussive plucking can enhance the presence wonderfully for any style of guitar playing. In my opinion, it's the greatest studio-recording innovation since John Bonham's distinctive drum sound.

Fender once again has proved itself to be a great name in the guitar industry by introducing this super acoustic model. It’s a full-size guitar and is IDEAL FOR BEGINNERS to start their musical journey as guitarists with it. It’s designed for learners so you must not expect too much from it, but yet, it is capable of producing great sounds in the hands of an advanced player that’s why claimed to be best suited for all styles of music.

The models in the California Series come in three Fender-exclusive body styles: Newporter, Malibu and Redondo. All of the models have a painted solid Sitka spruce top, solid mahogany back and sides as well as unique bracing patterns to deliver an articulate, highly responsive and balanced tone. The mahogany neck and pau ferro fingerboard and bridge give the guitar a rich and warm overall sound.
I didn’t use any guitar effects. I just used a straight into the amp, and I put the amp up pretty hot, though. The tweeds go up to 12 usually, and this one I had on 10 on the bridge pickup on the Strat. I was using a glass slide. Here’s the slide I was using. It’s like an old medicine bottle. I put some felt in there to make it a little bit of a tighter grip on my finger, but it’s the same slide that Dwayne Allman used.

Here you will find a selection of our most popular brands of acoustic guitars. This range includes Australian manufacturers Maton and Cole Clark, prestigious American companies C.F. Martin and Gretsch as well as fantastic value for money in Fender, Yamaha and Epiphone. We stock guitars ranging from beginner to professional, with and without pickups and in all different shapes, sizes and finishes.
Are you running it through a cab simulator? That or proper eqing. Turn up the mids and drop a high pass filter on that sucker. If you're finding it still lacking check out the KeFir cab simulator and then just use the preamp you have now. I've had wonderful results with that. If you're not liking your preamp try out The Anvil by Ignite amps. Best clean tone I've had out of freeware.
The Thunderhead guitars would be offered until June of ’72, with several model designation changes along the way. In ’70, the K-1360 became the K-1213, and in May of the following year changed again to the K-1233. At the same time, the vibrato-equipped models also changed, the K-1460 becoming the K-1214 and then the K-1234. The Tornado lasted until the end in January, ’73, but also went through the model number changes along with the Thunderheads, the K-1160 becoming the K-1211 and then the K-1231. The vibrato Tornados went from K-1260 to K-1212 and then K-1232.

Reverend guitars are known to sport many premium appointments despite their modest price tags. And the Jetstream HB is no exception. It has a comfortable roasted maple neck, a Wilkinson WVS50 IIK tremolo, pin-lock tuners and high-end electronic components. A korina body and a 12-inch-radius roasted maple/blackwood fretboard (depending on the finish) complete the other notable specs on this guitar.

Our pick here is the PAC112V version, for a few reasons. First off, the solid alder body offers you the same tonewood you’ll find in a lot of higher end S-style guitars. The maple neck and diecast tuners will feel really premium in your hands, too. But the 112 series further boosts its value with two Alnico V single coil pickups and an Alnico V humbucker. The addition of the humbucker in the bridge position will open up a whole other world of tones for a budding musician, giving the option for both clean, crisp single coil sounds and thick, high-output humbucker growls.
Of course, the big news was the introduction of the Spectrum 5. This had a slim, highly contoured body with a pointed upper horn pointing up and a hooked lower horn. The body featured a German carve relief along the edge. The head was the new hooked kind from ’64-65, while inlays were triangular “picks,” sort of like Kays of the time. Pickguards were two-part plastic covering the entire area under the strings, with volume and tone controls and stereo and mono jacks. The “vegematic” push-buttons came in five groovy colors.

I too have a similar Alvarez made in Japan, 4 digit model no. etc. Mine is a 5059 autumn heringbone model and there is actually a production date on the tag in the sound hole of 1978. The tag is identical to yours as is the headstock logo inlay. Tuners are different however. Based on the similarities to yours I would date it around the same years, '77-'80. I know the model name due to an Alvarez advertisement clipping that depicts the model I have. I too am getting ready to do some much needed TLC to mine as it has been my most loved acoustic for 20 years now. It was a gift from my mother who used it in a country band way back when. These are great guitars that can be bought very cheaply when you can find them. Good luck with the search!
Small-diaphragm condenser mics, on the other hand, tend to have flatter frequency plots and a better-behaved off-axis response, giving a sound sometimes described as more focused, but they seem to be less commonly chosen by the interviewees than large-diaphragm ones. Neumann's KM84 seems to be the most regular choice of small-diaphragm condenser, and numbers John Fry and Bill Price amongst its high-profile users, while Sennheiser's MKH40 warrants a particular mention from Mike Hedges: "I started using [these mics] when I was working with the Beautiful South. I started off with two and now have more than 20. I think they were originally designed for classical recording, because they have very high gain and very low noise. This means that you can get a very clean sound. They also accept massive amounts of volume, so you can put one against a guitar amp on full and it will take it." Hedge's concern about the ability of the microphone to handle the sheer volume of some guitar amps is echoed by several of the other producers, who make a point of mentioning that they switch in a condenser's 10dB pad when recording electric guitars.
The company makes four models, the FS (fingerstyle), GC, D, and the Jumbo, each retailing at a flat price of $8,880 as of September 2011, making them amongst the most expensive new guitars in the world. The company also provides the option for customized furnishings such as exotic woods, buffalo horn nuts and saddles, mammoth ivory bridge pins and nuts, and specialized inlay and cutaway designs etc for an additional fee. The customized Petros guitars made of rare woods such as African Blackwood, Ceylon Satinwood or old flitch matched Brazilian Rosewood are sold for an extra $4,000 which with other furnishings such as ivory bridge pins can fetch over $13,000 in total.[2]
We answer this with a resounding, “Yes!” While electric guitars depend solely on pickups to be heard and to change or distort sound, acoustic electric guitars just provide the ability to amplify the sounds of an acoustic. The acoustic electric guitar construction is still built the same way as an acoustic but with pickups added in the design. You now have the ability to play plugged-in to amplify the natural acoustic harmonics of your tonewoods, or you can play unplugged when jammin’ it at a Summer bonfire.
Quality replacement pot from Bourns.   Knurled 1/4" shaft fits most knobs.  Low torque, carbon resistive element, great replacement in many applications using passive humbucker or single-coil pickups.   Note that length of threaded part of shaft is 3/8" - measure to make sure that this is long enough for your application, especially if the pot mounts through the wooden guitar body.   (This pot will not work on Les Pauls, for example).  250K, Special A2 taper preferred by guitar and bass players.  Nut and washer included.  Note: threaded bushing diameter is 3/8", like most 24mm "quarter-sized" pots.
As the crowds at Beatles shows got louder, they needed louder amps. Jennings provided Lennon and Harrison with the first AC50 piggyback units, and McCartney's AC30/T60 rig was replaced with an AC100 head and an AC100 2×15" cabinet. Lennon and Harrison eventually got their own AC100 rigs, with 4×12"/2-horn configurations. In 1966 and 1967, The Beatles had several prototype or specially-built Vox amplifiers, including hybrid tube/solid-state units from the short-lived 4- and 7-series. Harrison in particular became fond of the 730 amp and 2×12 cabinet, using them to create many the guitar sounds found on Revolver and Sgt. Pepper's Lonely Hearts Club Band. Lennon favoured the larger 7120 amplifier, while Harrison preferred the 730 and McCartney had its sister 430 bass amplifier.
One of the most versatile electric guitars we encountered when putting together our list is ESP’s LTD EC-1000 KOA. Koa is a Hawaiian wood that this guitars top is made from, and it has very special sound qualities. It makes the tone very bright, crisp and clear, but at the same time it’s full of life and depth. We immediately though that the sound reminded us of an ukulele or some other happy little stringed instrument, and the sound can easily bring us back to summer evenings around a camp fire.
Seagull guitars were first manufactured in Quebec in 1982. Their goal was to introduce a high-quality guitar with all the essentials for a reasonable price. It goes without saying that they completed that goal, as Seagull guitars are still here today.Seagulls are great for both beginners and pros. They are durable and high-quality. They have incredible sound-quality and they have something for everyone. They make both acoustic and electric guitars at reasonable prices. Seagulls are easy to play even for beginners. Additionally, they strive to reduce the impact guitar manufacturers have on the environment. They use sustainable wood sourcing so that they can avoid deforestation. Reclaimed wood is often used in the production of Seagull guitars. 

{"id": "113900398", "categoryId":"site5ABA", "name":"Vintage Vintage 1960s Decca DM1-204 Natural Acoustic Guitar", "pageUrl":"/Used/In-Store-Vintage/Vintage-Vintage-1960s-Decca-DM1-204-Natural-Acoustic-Guitar.gc", "thumbnailUrl":"", "hasFeatures":"0", "isAccessory":"0", "message":"", "value":"179.99", "priceMin":"179.99", "priceMax":"179.99", "msrp":"", "productVisibilityMSRP":"1", "restockPrice":"", "openBoxPrice":"", "clearancePrice":"", "isPlatinum":"0", "priceSavingsMaxPrice":"0.00", "priceSavingsMaxPercent":"0", "inventory":"1", "brand":"In Store Vintage", "reviewStarImageUrl": "", "reviewStarRating":"0.0", "reviewStarRatingInteger":"0", "reviewHowManyReviews":"0", "usedOrNew":"used", "discontinued":"0", "onOrder":"0", "clearance":"0", "canBeSold":"1", "accessoryCategories":"site5LFMID,site5LAAB", "stickerText": "Vintage", "isVintage": "1", "outletonly": "", "checksum":"134135816000", "priceVisibility": "", "itemType": "Vintage"}

A tung oil-finished rock maple neck, and a slightly more curved fretboard radius of 13.75 inches are the other small modifications to the ‘speed’ features on the MD200. However, it has a thinner bolt-on neck as compared to the MD400’s wider mahogany set neck. That said, both neck profiles remain a shallow “C” shape, and the guitars’ dramatically beveled cutaways give you ample room to reach the high notes.

You should have been making all the above adjustments with the preferred gauge of strings, but since you have probably loosened and tightened the strings a number of times over the course of this process, you should now put on a fresh set and do a final check of all the settings Neck adjustments in particular can tend to settle in over the a couple hours after they have been done, so I find it best to then let the guitar sit overnight and do a final check the next day. The bottom line in ending up with a quality set-up is making each of the important adjustments in the correct order: Neck- then Nut- then Bridge saddles.

Slash is a longtime fan of legend Seymour Duncan’s hand-wound pickups, and for his new Epiphone Firebird, Slash choose custom Seymour Duncan "Slash" open coil-humbuckers for the rhythm (APH-1) and the lead positions (APH-2). These were Slash’s first custom pickups made with Seymour Duncan and feature Alnico II magnets and are slightly overwound for a boosted output. Each pickup has a single conductor cable, a long-legged bottom plate, and a wooden spacer. Controls include individual Volume and Tone pots with traditional Black Top Hat knobs with metal inserts and pointers along with a Switchcraft 3-way Toggle switch. Tone controls for both pickups also feature Sprague "Orange Drop" capacitors (0.022uF, 600V, 5%), the same capacitors Slash uses on his custom designed Les Pauls.
Processed Pitch Shifts: Few pitch-shifting algorithms are transparent enough to allow you to transpose anything by more than a couple of semitones without obvious side-effects. If what you're processing is going through an amp modeller, however, you can get away with much more radical changes. You can even do effective swoops and dives in pitch by progressively increasing the amount of pitch-shifting you apply to a note, and pitch changes of an octave or more can sound good, although they probably won't sound natural at these extremes. Sam Inglis
{ "thumbImageID": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "defaultDisplayName": "Ibanez AEWC400TKS Comfort Acoustic-Electric Guitar", "styleThumbWidth": "60", "styleThumbHeight": "60", "styleOptions": [ { "name": "Transparent Black Sunburst", "sku": "sku:site51500000177716", "price": "499.99", "regularPrice": "499.99", "msrpPrice": "749.99", "priceVisibility": "1", "skuUrl": "/Ibanez/AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst-1500000177716.gc", "skuImageId": "AEWC400TKS-Comfort-Acoustic-Electric-Guitar-Transparent-Black-Sunburst/K58565000001000", "brandName": "Ibanez", "stickerDisplayText": "Top Seller", "stickerClass": "", "condition": "New", "priceDropPrice":"", "wasPrice": "", "priceDrop": "", "placeholder": "", "assetPath": "", "imgAlt": "" } ] }

SolarWinds Server & Application Monitor allows you to monitor your hybrid IT applications and systems. Monitor Microsoft® Office 365 Exchange side by side on your on-premises Exchange server and other applications. Check, track, and report on O365 user/shared mailbox growth, users over quota, archived mailboxes, inactive mailboxes, mobile device, mailbox groups, and more. You can also monitor Microsoft portal access to help ensure you're meeting your SLAs.
Years ago companies used to manufacture rotating speaker cabinets (the most famous being the Leslie Rotary Speaker) – as they rotated the sound would change and develop, creating interesting modulation effects. Nowadays such things are considered too large and inconvenient to transport and use, so we have stomp boxes to help us emulate the sound. The most famous of these is the Dunlop Uni-Vibe, and although it doesn’t sound as close as other pedals to the real thing, it has become a famous sound in its own right. Rotary speaker effects often have controls for the speed of the effect, and can sometimes (such as in the case of the Uni-Vibe) be connected to expression pedals to control the speed on the fly. If you’re into 60’s psychedelic rock like Jimi Hendrix, this one’s a must.

 Great, low priced, vintage project Les Paul "copy" guitar. Guitar as photo'd only. Multi-pieced Mahogany, double bound body with a carved top. Bound rosewood fret board with simulated mother of pearl "block" style fret markers and dot side markers. Frets still in good "playable" condition. Good neck profile. Missing nut and tuning machines on headstock. Pick-ups function but guitar will need to be rewired to work properly and missing toggle will need to be replaced.  Bridge needs work and it has a Gibson style stop tail piece. No gig-bag or case included. Would make a great vintage, Japanese, project / player guitar.
Some steel-string acoustic guitars are fitted with pickups purely as an alternative to using a separate microphone. They may also be fitted with a piezoelectric pickup under the bridge, attached to the bridge mounting plate, or with a low-mass microphone (usually a condenser mic) inside the body of the guitar that converts the vibrations in the body into electronic signals. Combinations of these types of pickups may be used, with an integral mixer/preamp/graphic equalizer. Such instruments are called electric acoustic guitars. They are regarded as acoustic guitars rather than electric guitars, because the pickups do not produce a signal directly from the vibration of the strings, but rather from the vibration of the guitar top or body.